Standards Confirmed
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
System Manual Pdm360smart Monitor CR1070 CR1071 Codesys® V2.3 Target V05 English
System Manual PDM360smart monitor CR1070 CR1071 CoDeSys® V2.3 Target V05 English 7390674_01_UK 2012-05-16 2012-05-16 7390674_01_UK ifm System Manual ecomatmobile PDM360smart (CR1070, CR1071) Target V05 2012-05-16 Contents Contents 1 About this manual 7 1.1 What do the symbols and formats mean? ......................................................................7 1.2 How is this manual structured?.......................................................................................8 2 Safety instructions 9 2.1 Important!........................................................................................................................9 2.2 What previous knowledge is required?.........................................................................10 3 System description 11 3.1 Information concerning the device................................................................................11 3.2 Information concerning the software.............................................................................11 3.3 PLC configuration .........................................................................................................12 4 Configurations 13 4.1 Set device parameters (setup)......................................................................................13 4.1.1 Start set-up ..............................................................................................................14 4.1.2 Show the current device settings.............................................................................15 4.1.3 Change -
Věstník ÚNMZ 05/2003
Ročník 2003 Číslo 5 Rozesláno dne: 7. května 2003 Cenová skupina 457 OBSAH: ČÁST A – OZNÁMENÍ Strana: Oddíl 1. Harmonizované normy a určené normy Oddíl 2. České technické normy ČSNI č. 18/03 o vydání ČSN, jejich změn, oprav a zrušení 2 ČSNI č. 19/03 o schválení evropských a mezinárodních norem k přímému používání jako ČSN 15 ČSNI č. 20/03 o zahájení zpracování návrhů českých technických norem 25 ČSNI č. 21/03 o úkolech spolupráce s pracovními orgány evropských a mezinárodních normalizačních organizací zařazených do plánu TN pro rok 2003 53 ČSNI č. 22/03 o návrzích na zrušení ČSN 59 Oddíl 3. Metrologie Oddíl 4. Autorizace ÚNMZ č. 27/03 o změně autorizace ITI TÜV, s. r. o., Praha 66 ÚNMZ č. 28/03 o změně autorizace Strojírenskému zkušebnímu ústavu, s. p., Brno 66 ÚNMZ č. 29/03 o udělení autorizace TECHNICKÝM LABORATOŘÍM OPAVA, a.s., Opava 67 ÚNMZ č. 30/03 o udělení autorizace Ústavu pro výzkum motorových vozidel s. r. o., Praha 67 ÚNMZ č. 31/03 o změně autorizace Zkušebnímu ústavu lehkého průmyslu, s. p., České Budějovice 68 Oddíl 5. Akreditace ČIA č. 05/03 vydání osvědčení o akreditaci a o ukončení platnosti osvědčení o akreditaci 69 Oddíl 6. Ostatní oznámení MO č. 05/03 seznam nových standardizačních dohod NATO, vydání doplňků ke standardizačním dohodám, zrušení standardizačních dohod a přistoupení ke standardizačním dohodám 82 ČMI č. 04/03 o vydání metrologického předpisu MP 008-03 86 ČÁST B – INFORMACE ÚNMZ č. 05/03 Informačního střediska WTO o notifikacích Členů Dohody o technických překážkách obchodu (TBT), která je nedílnou součástí Dohody o zřízení Světové obchodní organizace (WTO) a smluvních stran Smlouvy mezi vládou ČR a vládou SR o spolupráci v oblasti technické normalizace, metrologie, zkušebnictví a souvisejících činnostech 87 ČÁST C – SDĚLENÍ ČÁST D – PŘEVZATÉ INFORMACE ČÁST A - OZNÁMENÍ Oddíl 2. -
Sessions Full Week
MONDAY MORNING, 2 DECEMBER 2013 GOLDEN GATE 4/5, 9:00 A.M. TO 11:45 A.M Session 1aAA Architectural Acoustics: General Topics in Architectural Acoustics 1a MON. AM Steven D. Pettyjohn, Chair The Acoustics & Vibration Group, Inc., 5700 Broadway, Sacramento, CA 95820 Contributed Papers 9:00 mechanisms allows us to predict how this ability is lost in the presence of reflections and noise, and to predict a number of ways that real clarity can 1aAA1. Toward reliable metrics for Sacred Harp singing spaces. be measured and optimized in classrooms, lecture halls, and performance Benjamin J. Copenhaver, Scott J. Schoen, and Michael R. Haberman venues of all types. This paper will describe and demonstrate how reflec- (Mech. Eng. Dept. and Appl. Res. Labs., The Univ. of Texas at Austin, P.O. tions degrade the closeness or clarity of sounds, and how this degradation Box 8029, Austin, TX 78713-8029, [email protected]) can be prevented or ameliorated. Examples of old and new spaces with ei- Sacred Harp singing, a common type of shape-note singing, is a centu- ther excellent or poor clarity will be presented, along with a few examples ries-old tradition of American community choral music. It is traditionally a of recent improvements to existing halls. participatory form of music with no distinction between performers and au- dience, a characteristic that makes for acoustical requirements that differ 09:45 considerably from those of a concert hall or even a typical worship space. In the spirit of the text Concert Halls and Opera Houses by L. Beranek, we 1aAA4. -
Microturbines Applications — Safety BS ISO 19372:2015 BRITISH STANDARD
BS ISO 19372:2015 BSI Standards Publication Microturbines applications — Safety BS ISO 19372:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO 19372:2015. The UK participation in its preparation was entrusted to Technical Committee MCE/16, Gas turbines. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. © The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 82186 8 ICS 27.040 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2015. Amendments issued since publication Date Text affected BS ISO 19372:2015 INTERNATIONAL ISO STANDARD 19372 First edition 2015-02-15 Microturbines applications — Safety Microturbines — Sécurité Reference number ISO 19372:2015(E) © ISO 2015 BS ISO 19372:2015 ISO 19372:2015(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2015 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. -
Bureau of Standards (BOBS) Head Office: Main Airport Road Plot No
Bureau of Standards (BOBS) Head Office: Main Airport Road Plot No. 55745 Block 8, Gaborone Private Bag BO 48 Tel: +267 3903200 Fax: +267 3903120 Email: [email protected] Website: www.bobstandards.bw Francistown Branch: Plot 23267 Donga, Adjacent to Metsef Wholesalers Private Bag F465, Francistown Tel: +267 2416232 Fax: +267 2416251 BOBS Standards Work Programme BULLETIN 1 April 2020 – 31 March 2021 [Issue No.26] Gaborone, Botswana Contents International Classification for Standards (ICS).............. 3 List of technical Committees........................................... 5 Draft Botswana Standards.............................................. 8 Project stages table........................................................ 32 International Classification for Standards (ICS) Main ICS Subject Fields 01 Generalities. Terminology. Standardization. Documentation 03 Sociology. Services. Company Organization and Management. Administration. Transport 07 Mathematics. Natural Sciences 11 Health Care Technology 13 Environment and Health Protection. Safety 17 Metrology and Measurement. Physical Phenomena 19 Testing 21 Mechanical Systems and Components for General Use 23 Fluid Systems and Components for General Use 25 Manufacturing Engineering 27 Energy and Heat Transfer Engineering 29 Electrical Engineering 31 Electronics 33 Telecommunications 35 Information Technology. Office Equipment 37 Image Technology 39 Precision Mechanics. Jewellery 43 Road Vehicle Engineering 45 Railway Engineering 47 Ship Building and Marine Structures 49 Aircraft -
ISO 22380:2018 F60cae51f995/Iso-22380-2018
INTERNATIONAL ISO STANDARD 22380 First edition 2018-08 Security and resilience — Authenticity, integrity and trust for products and documents — General principles for product fraud risk and countermeasures iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 22380:2018 https://standards.iteh.ai/catalog/standards/sist/895afca2-6332-43c3-b3af- f60cae51f995/iso-22380-2018 Reference number ISO 22380:2018(E) © ISO 2018 ISO 22380:2018(E) iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 22380:2018 https://standards.iteh.ai/catalog/standards/sist/895afca2-6332-43c3-b3af- f60cae51f995/iso-22380-2018 COPYRIGHT PROTECTED DOCUMENT © ISO 2018 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. ISO copyright office CP 401 • Ch. de Blandonnet 8 CH-1214 Vernier, Geneva Phone: +41 22 749 01 11 Fax:Website: +41 22www.iso.org 749 09 47 Email: [email protected] iiPublished in Switzerland © ISO 2018 – All rights reserved ISO 22380:2018(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv -
System Manual Pdm360compact Monitor CR1052 CR1053 CR1055
System Manual PDM360compact monitor CR1052 CR1053 CR1055 CR1056 CoDeSys® V2.3 target v04 English 7390676_00_UK 2012-09-28 2012-09-28 7390676_00_UK ifm System Manual ecomatmobile PDM360compact monitor (CR1052…CR1056) target v04 2012-09-28 Contents Contents 1 About this manual 7 1.1 What do the symbols and formats mean? ......................................................................7 1.2 How is this documentation structured?...........................................................................8 2 Safety instructions 9 2.1 Important!........................................................................................................................9 2.2 What previous knowledge is required?.........................................................................10 3 System description 11 3.1 Information concerning the device................................................................................11 3.2 Information concerning the software (Linux | CoDeSys 2.3) ........................................11 3.3 PLC configuration .........................................................................................................12 4 Configurations 13 4.1 Set device parameters (setup)......................................................................................13 4.1.1 Start setup ...............................................................................................................14 4.1.2 Ethernet interface: set IP address ...........................................................................15 4.1.3 -
R Egist R a T Ion D O Cume Nt
REGISTRATION DOCUMENT 2014 Summary PRESENTATION OF THE GROUP 5 FINANCIAL STATEMENTS 115 1.1 General overview of the Group 6 1.2 Selected financial information 9 4.1 IFRS consolidated Financial Statements at December 31, 2014 116 1.3 History 12 4.2 Bureau Veritas SA statutory financial statements 184 1.4 The TIC industry 13 4.3 Additional information regarding the Company in 1.5 The Group's competitive advantages 17 view of the approval of the 2014 financial 1.6 Strategy 20 statements 211 1.7 Presentation of business activities 23 1.8 Accreditations, approvals and authorizations 42 1.9 Significant contracts 43 1.10 Research and development, patents and licenses 44 1.11 Information and management systems 44 CORPORATE SOCIAL 1.12 Risk factors 45 RESPONSIBILITY 215 1.13 Legal, administrative, government and arbitration procedures and investigations 54 5.1 Societal information 217 1.14 Insurance 55 5.2 Social information 223 5.3 Health, Safety and Environment 230 5.4 Information gathering methods 236 5.5 Cross-reference index 238 CORPORATE 5.6 Opinion of the independent auditor 240 GOVERNANCE 57 2.1 Corporate Officers and members of the Executive Committee 59 2.2 Report of the Chairman of the Board of Directors 67 INFORMATION ON THE 2.3 Executive officers’ remuneration 84 COMPANY AND THE 2.4 Interests of Executive Corporate Officers, Directors and certain employees 93 CAPITAL 243 6.1 General information 244 6.2 Simplified Group organizational structure as of December 31 245 6.3 Subsidiaries and other equity participations 246 MANAGEMENT REPORT -
PROPOSED WORK PROGRAM for 2020 As of July 2020
BUREAU OF PHILIPPINE STANDARDS PROPOSED WORK PROGRAM FOR 2020 as of July 2020 SUBJECT PROJECT REFERENCE STATUS STAGES OF DEVELOPMENT INTERNATIONAL TECHNICAL COMMITTEE [New/Revision 1. Preparatory CLASSIFICATION FOR BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS Standard Test Method for Time of Setting of Concrete ASTM C403 / C403M - 16 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Mixtures by Penetration Resistance Standard Test Method for Measuring Thickness of Concrete ASTM C174 / C174M - 17 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Elements Using Drilled Concrete Cores Standard Specification for Materials for Shotcrete ASTM C 1436-13 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Standard Test Method for Flexural Strength of Concrete ASTM C293/C293M-16 New Finalization 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete (Using Simple Beam with Center-Point Loading) Standard Specification for Grout for Masonry ASTM C476-19 New Drafting/Deliberation 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Standard Specification for Mortar for Unit Masonry ASTM C270-19e1 New Drafting/Deliberation 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete Standard Test Method for Flexural Strength of Concrete ASTM C78 / C78M - 18 New Preparatory 91.100.30 BPS/TC 5 Concrete, Reinforced Concrete and Prestressed Concrete (Using Simple -
Iso/Tc292 規格開発状況（2021 年 6 月）
ISO/TC292 規格開発状況（2021 年 6 月） 注：オレンジ色のハイライトは，日本提案案件 WG 規格番号 タイトル 現在のステータス 備 考 ISO/TR 22312:2011 Societal security — Technological capabilities 1 ISO 22300:2021 Security and resilience — Vocabulary 発行済み 2 ISO 22301:2019 Security and resilience — Business continuity 発行済み JIS Q 22301:2020 management systems — Requirements セキュリティ及びレジリエンス―事業継続マネジメント 更なる参考書 システム―要求事項 外部リンク（ISO） 2 ISO 22313:2020 Security and resilience — Business continuity 発行済み JIS Q22313 改正中 management systems — Guidance on the use of ISO 22301 2 ISO 22316:2017 Security and resilience — Organizational resilience — 発行済み Principles and attributes 2 ISO/TS 22317:2015 Societal security -- Business continuity management 発行済み 改定中（今夏発行予定） systems -- Guidelines for business impact analysis (BIA) 1 2 ISO/TS 22318:2015 Societal security — Business continuity management 発行済み 改定中（今夏発行予定） systems — Guidelines for supply chain continuity 2 ISO/TS 22330:2018 Security and resilience — Business continuity 発行済み management systems — Guidelines for people aspects of business continuity 2 ISO/TS 22331:2018 Security and resilience — Business continuity 発行済み management systems — Guidelines for business continuity strategy 2 ISO/TS 22332:2021 Security and resilience — Business continuity 発行済み management systems — Guidance for developing business continuity procedures CASCO ISO/IEC 17021-6 Conformity assessment — Requirements for bodies 定期見直し実施中 providing audit and certification of management (ISO/CASCO主導) systems — Part 6: Competence requirements for auditing and certification of business continuity -
How Standards Contribute to Business Resilience in Crisis Situations
Physikalisch-Technische Bundesanstalt INTERNATIONAL Braunschweig und Berlin National Metrology Institute COOPERATION Current Situation How Standards Contribute to Business Resilience in Crisis Situations Niels Ferdinand, Richard Prem On behalf of the Federal Government of Germany, the Physikalisch-Technische Bundesanstalt promotes the improvement of the framework conditions for economic, social and environmentally friendly action and thus supports the development of quality infrastructure. 2 CONTENTS 1. Background 4 2. The significance of standards on increasing business resilience 4 2.1. Defining resilience and business continuity management 4 2.2. Fields of action for increasing business resilience 5 2.3. The correlation between standardisation and business resilience 5 2.4. Risk management in standardisation 7 3. Specific standards for resilience and business continuity management 8 3.1. Topic overview for specific standards 8 3.2. Effectiveness of standards in social and economic crises 10 Abbreviations 11 References 12 An overview of existing standards, specifically in regard to business resilience 14 E-Learning resources 21 Notes 22 3 1. BacKgroUND 1. Background The global corona virus crisis is presenting enormous This paper summarises the current state of affairs of challenges for companies worldwide. Companies in de- standardisation in the area of business resilience. It will veloping and emerging nations are especially affected, as explain the general contributions standardisation can the crisis has severe ramifications for them, and they have make towards promoting resilience. On this basis, it will less access to support. This raises the question of how we give an overview to specific standards relevant to busi- can use standardisation to improve the resilience of com- ness resilience. -
Standards for Enabling Trade— Mapping and Gap Analysis Study
Standards for Enabling Trade— Mapping and Gap Analysis Study An IA-CEPA Early Outcomes Initiative November 2017 Standards For Enabling Trade—Mapping and Gap Analysis Study 2 An IA-CEPA Early Outcomes Initiative – November 2017 Contents ListofFigures..............................................................................................................3 Abbreviations...............................................................................................................4 Terms..........................................................................................................................6 Acknowledgements......................................................................................................8 ExplanatoryNotes........................................................................................................8 Foreword.....................................................................................................................9 Recommendations.....................................................................................................10 ExecutiveSummary....................................................................................................11 Introduction................................................................................................................13 ProjectPurpose.........................................................................................................13 Objectives..................................................................................................................13