EQUIPMENT NAME BRIEFF DESCRIPTION QUANTITY

LASERS AUTOMATED 07 ORECISION LASERS, TO

LEVEL, GRADE AND ALLIGNMENT

REBAR TIE GUNS USED TO TIE 08

TOW BEHIND REBAR rebar bender is ideal 01 BENDER for both high-production workshops or job sites.

ELECTRIC – REBAR rebar bender is ideal 02 BENDERS for both high-production workshops or job sites

ELECTRIC, HYDROLIC Ideal for cutting epoxy- 02 coated rebar. REBAR CUTTER

ELECTRIC, HYDROLIC Ideal for bending epoxy- 01 coated rebar. REBAR BENDER

LARGE Faster, Safer, Easier 3 CHIPPING Concrete Demolition

HAMMER

SMALL Faster, Safer, Easier 10 CONCRETE CHIPPING Concrete Demolition HAMMER

typically used to cut hard materials, DEMOLITION SAW such as metals, tile, and concrete. 05 The cutting action is performed by an abrasive disc, similar to a thin grinding wheel.

typically used to cut hard materials, WALKBEHIND CONCRETE such as metals, tile, and concrete. 02 SAW The cutting action is performed by an abrasive disc, similar to a thin grinding wheel.

STEEL WELDERS To weld various types of steel 02 ELECTRIC

To weld various types of steel STEEL WELDER 01 GAS POWER

CONCRETE VIBRAROR Concrete vibrators eliminate air 05 bubbles by vigorously shaking the (sticks) freshly poured concrete. Using a concrete vibrator during a pour is not only recommended but, in many cases, it is also a building code requirement.

Concrete vibrators eliminate air BACK PACK CONCRETE bubbles by vigorously shaking the 02 VIBRARORS freshly (GAS POWERED) poured concrete. Using a concrete vibrator during a pour is not only recommended but, in many cases, it is also a building code requirement.

Concrete vibrators eliminate air ELECTRIC CONCRETE bubbles by vigorously shaking the 05 VIBRARORS freshly poured concrete. Using a concrete (NORTHBROOK) vibrator during a pour is not only recommended but, in many cases, it is also a building code requirement

EQUIPMENT NAME BRIEFF DESCRIPTION QUANTITY

GAS POWERED WATER PUMP used to remove standing water 01 Before concrete can be pour, (3”) usually after a rain storm.

Generators produce the electrical GENERATOTS power required for using power 07 (GAS POWER)

WALK BEHIND POWER TROWEL A Walk Behind Power Trowel is a 06 machine that finishes concrete after MACHINE it has been freshly poured. The process of troweling helps to flatten the slab, removing the hills and valleys, as well as drawing the moisture out of the concrete to help the curing process.

Ride-on power trowels are used by RIDE ON POWER TROWEL an operator sitting on a seat upon 02 MACHINE the machinery, controlling the power trowel movement with two joystick levers, used for large areas, to finish the concrete slabs.

used to remove standing water ELECTRIC WATER PUMPS (2”) Before concrete can be pour, 02 usually after a rain storm.

PROPANE HEATERS Propane Heater is ideal for 03 outdoor/indoor construction, as well as industrial and commercial applications, making it an excellent choice for your portable heating needs.

KEROSINE/ELECTRIC HEATERS Great for construction sites, event tents, 06 food prep areas, shops and more. The large 27-gal. fuel tank provides up to 13 hours of continuous heat. Plus, this heater gives you options — position it outside and vent warm air into your space or place the heater inside and vent exhaust out.

LARGE SHOP FANS provides even airflow 03

For cutting metals SREEL CUTTING TORCHES 03 WITH OXYGEN & GAS (TORCHES & TANKS)

STEEL & WOOD SHOP SAWS They are lightweight and 04 versatile, able to cut through wood, metal & steel

Ideal for shop & job site SHOP VACUUMS 02 clean ups

DEWALT 01

TOYOTA FORKLIFT (2020) LIFTS UP TO 2 TOM 01 CAPACITY

KUBOTA- BOBCAT USED MOSTLY FOR 01 LEAN UPS

VARIOUS MISCELANEOUS MORE THAN 3000 PC OF Over TOOLS MISCELANEOUS TOOLS 3,000 Ie: items

CODLESS , CONCRETE TOOLS, EXTENSION CORDS, CONCRETE BLANKETS, SHOVELS, PICKS, WEEL BARROWS, ETC

(06/12)

EQUIPMENT NAME BRIEFF DESCRIPTION QUANTITY

STEEL PLY FORMS VARIOUS SIZES OVER STEEL FRAME WITH PLYWWOD AND ACCESSORIES, ALL 5000 PCS INSERTS YOU NEED TO FORM (SYMON) VARIOUS FOUNDATIONS

WESTERN FORMS, ALLUMINUM VARIOUS SIZES OVER FORMS AND ACCESSORIES, ALL 6000 PCS YOU NEED TO FORM VARIOUS FOUNDATIONS

2003 USED TO MOVE FORMS, 01 STERLIN TRUCK LT9 , AND OTHER WITH FASSI KNUCKLE CRANE EQUIPMENT (MARCH 2015)

2013 CHEVY SILVERDADO PICK UP TRUCK WITH 01 CREW CAB & BUILT IN BOXES

2017 FORD F350 PICK UP TRUCK WITH 01 SUPER DUTTY CREW CAB & BUILT IN TOOL BOXES

2019 CHEVY PICK UP TRUCK WITH 01 2500 HD CREW CAB & BUILT IN TOOL BOXES

2007 DODGE RAM 2500 PICK UP TRUCK WITH 01 CREW CAB & BUILT IN TOOL BOXES

2018 CHEVY COLORADO SMALL PICK UP TRUCK 01 USED TO VISIT JOB SITE

2007 MITSUBISSI USED TO MOVE TOOLS 01 FLATBED & EQUIPMENT TO THE JOB SITES

(06/12)