FIELD INSTRUCTIONS

FOR THE PERIODIC INVENTORY OF

FEDERATED STATES OF MICRONESIA

2016

FOREST INVENTORY AND ANALYSIS

RESOURCE MONITORING AND ASSESSMENT PROGRAM

PACIFIC NORTHWEST RESEARCH STATION

USDA FOREST SERVICE THIS MANUAL IS BASED ON:

FOREST INVENTORY AND ANALYSIS

NATIONAL CORE FIELD GUIDE

VOLUME I: FIELD DATA COLLECTION PROCEDURES

VERSION 7.0

Cover image by Gretchen Bracher pg.I Table of Contents CHAPTER 1 INTRODUCTION ...... 13 SECTION 1.1 ORGANIZATION OF THIS MANUAL...... 13 SECTION 1.2 THE INVENTORY...... 14 SECTION 1.3 PRODUCTS ...... 14 SECTION 1.4 UNITS OF MEASURE ...... 14 SECTION 1.5 PLOT DESIGN GENERAL DESCRIPTION ...... 14 SUBSECTION 1.5.1 PLOT LAYOUT ...... 15 SUBSECTION 1.5.2 DATA ARE COLLECTED ON PLOTS AT THE FOLLOWING LEVELS .15 SECTION 1.6 QUALITY ASSURANCE/QUALITY CONTROL ...... 16 SUBSECTION 1.6.1 GENERAL DESCRIPTION ...... 16 SECTION 1.7 SAFETY ...... 16 SUBSECTION 1.7.1 SAFETY IN THE WOODS...... 16 SUBSECTION 1.7.2 SAFETY ON THE ROAD ...... 17 SUBSECTION 1.7.3 WHAT TO DO IF INJURED...... 17

CHAPTER 2 LOCATING THE PLOT ...... 19 SECTION 2.1 LOCATING AN ESTABLISHED PLOT ...... 19 SUBSECTION 2.1.1 NAVIGATING WITH PHOTOGRAPHY...... 19 SUBSECTION 2.1.2 NAVIGATING WITH GPS ...... 19 SUBSECTION 2.1.3 NAVIGATING WITH REFERENCE POINT (RP) DATA ...... 20 SUBSECTION 2.1.4 REVERSE REFERENCE POINT (RP) METHOD ...... 20 SECTION 2.2 ESTABLISHED PLOT ISSUES ...... 20 SUBSECTION 2.2.1 DIFFICULTY FINDING ESTABLISHED PLOTS...... 20 SUBSECTION 2.2.2 INCORRECTLY INSTALLED PLOT ...... 21 SUBSECTION 2.2.3 INCORRECTLY INSTALLED SUBPLOT OR MICROPLOT...... 21 SUBSECTION 2.2.4 PC STAKE OR SUBPLOT/MICROPLOT PIN MISSING OR MOVED . . .21 SUBSECTION 2.2.5 LOST SUBPLOT ...... 22 SUBSECTION 2.2.6 LOST PLOT (REPLACEMENT PLOT) ...... 22 SECTION 2.3 LOCATING NEW PLOTS...... 22 SUBSECTION 2.3.1 INSTALLING A PLOT WITH TARGET (TGT) COORDINATES ...... 22 SECTION 2.4 CIRCUMSTANCES PRECLUDING PLOT ESTABLISHMENT/ MEASUREMENT...... 23

CHAPTER 3 PLOT LAYOUT AND REFERENCING ...... 25

SECTION 3.1 PLOT DESIGN ...... 25 Table of Contents SUBSECTION 3.1.1 PLOT LAYOUT ...... 25 SUBSECTION 3.1.2 PLOT DIMENSIONS ...... 25 SECTION 3.2 PLOT ESTABLISHMENT...... 26 SUBSECTION 3.2.1 PLOT ESTABLISHMENT GUIDELINES...... 26 SUBSECTION 3.2.2 PLOT INTEGRITY ...... 26 SUBSECTION 3.2.3 NEW PLOT ESTABLISHMENT TOLERANCES...... 27 pg.II SECTION 3.3 MONUMENTING AND REFERENCING PLOT CENTER ...... 27 SUBSECTION 3.3.1 THE REFERENCE POINT ...... 27 SUBSECTION 3.3.2 WITNESS TREES/OBJECTS ...... 28 SUBSECTION 3.3.3 EXCEPTIONS TO MONUMENTING PLOT CENTER...... 28 SECTION 3.4 MONUMENTING AND REFERENCING SUBPLOTS 2 THROUGH 4 29 SUBSECTION 3.4.1 LOCATE AND MONUMENT SUBPLOT CENTER ...... 29 SUBSECTION 3.4.2 ESTABLISHING SUBPLOTS WHEN PLOT CENTER IS INACCESSIBLE...... 29 SUBSECTION 3.4.3 LOCATE AND MONUMENT THE MICROPLOT ...... 30 SECTION 3.5 MONUMENTING AND REFERENCING ENTIRELY NONFOREST PLOTS ...... 30 SUBSECTION 3.5.1 NONFOREST PLOTS WITH MEASUREABLE NONFOREST...... 30 SUBSECTION 3.5.2 NONFOREST PLOTS WITHOUT MEASURABLE NONFOREST ...... 30

CHAPTER 4 PLOT LEVEL DATA ...... 31 SECTION 4.1 LOST PLOT/REPLACEMENT PLOT...... 31 SUBSECTION 4.1.1 LOST ANNUAL PLOT...... 31 SUBSECTION 4.1.2 REPLACEMENT PLOT...... 31 SECTION 4.2 PLOT LEVEL DATA DOWNLOADED TO THE PDR...... 31 SUBSECTION 4.2.1 PLOT LEVEL DATA ITEMS ...... 32 ITEM 4.2.1.1 STATE OR COUNTRY (CORE 1.1) ...... 32 ITEM 4.2.1.2 ISLAND (PACI) ...... 32 ITEM 4.2.1.3 COUNTY (CORE 1.2) ...... 32 ITEM 4.2.1.4 PLOT NUMBER (CORE 1.3)...... 32 ITEM 4.2.1.5 CYCLE (PNW)...... 32 ITEM 4.2.1.6 SUBCYCLE (PNW) ...... 33 ITEM 4.2.1.7 FIELD GUIDE VERSION (CORE 1.12)...... 33 ITEM 4.2.1.8 PDR STARTING DATA RECORDER VERSION NUMBER (PNW) ...... 33 ITEM 4.2.1.9 PDR ENDING DATA RECORDER VERSION NUMBER (PNW) ...... 33 ITEM 4.2.1.10 DECLINATION (CORE OPTIONAL 1.14) ...... 33 ITEM 4.2.1.11 CHANGE MATRIX REQUIRED (PNW)...... 34 ITEM 4.2.1.12 P2 VEGETATION SAMPLING STATUS (CORE OPTIONAL 8.3.1) ...... 34 ITEM 4.2.1.13 LEVEL OF DETAIL (CORE OPTIONAL 8.3.2) ...... 34 ITEM 4.2.1.14 INVASIVE PLANT SAMPLING STATUS (CORE OPTIONAL 9.3) ...... 35 ITEM 4.2.1.15 INVASIVE PLANT SPECIMEN COLLECTION RULE (CORE OPTIONAL 9.12) ...... 35 ITEM 4.2.1.16 DWM SAMPLING STATUS (BASE) ...... 35 ITEM 4.2.1.17 SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED (PNW) ...... 36 ITEM 4.2.1.18 YEAR OF PREVIOUS INVENTORY (PNW) ...... 36 ITEM 4.2.1.19 MONTH OF PREVIOUS INVENTORY (PNW) ...... 36 SECTION 4.3 PLOT LEVEL DATA COLLECTED IN THE FIELD ...... 37 SUBSECTION 4.3.1 CREW VISIT INFORMATION ...... 37 ITEM 4.3.1.1 SAMPLE METHOD CODE (PNW) ...... 37 ITEM 4.3.1.2 QA STATUS (CORE 1.17) ...... 37 ITEM 4.3.1.3 CREW NUMBER (CORE 1.18) ...... 37 SUBSECTION 4.3.2 CURRENT DATE OF INVENTORY ...... 38 ITEM 4.3.2.1 YEAR (CORE 1.13.1) ...... 38 ITEM 4.3.2.2 MONTH (CORE 1.13.2)...... 38 ITEM 4.3.2.3 DAY (CORE 1.13.3) ...... 38 SUBSECTION 4.3.3 TIME SPENT ON PLOT ...... 38 ITEM 4.3.3.1 TRAVEL TIME TO PLOT (PNW)...... 38 ITEM 4.3.3.2 MEASUREMENT TIME ON PLOT (PNW) ...... 39 ITEM 4.3.3.3 TRAVEL TIME FROM PLOT (PNW) ...... 39 SUBSECTION 4.3.4 PLOT LEVEL FUNDAMENTALS ...... 39

Table of Contents pg.III ITEM 4.3.4.1 PLOT STATUS (CORE 1.4) ...... 39 ITEM 4.3.4.2 PLOT NONSAMPLED REASON (CORE 1.7)...... 39 ITEM 4.3.4.3 NONFOREST SAMPLING STATUS (CORE 1.5) ...... 40 ITEM 4.3.4.4 NONFOREST PLOT STATUS (CORE 1.6)...... 40 ITEM 4.3.4.5 NONFOREST PLOT NONSAMPLED REASON (CORE 1.8) ...... 41 ITEM 4.3.4.6 SUBPLOTS EXAMINED (CORE 1.9) ...... 41 ITEM 4.3.4.7 SAMPLE KIND (CORE 1.10)...... 42 ITEM 4.3.4.8 PREVIOUS PLOT MAPPING OR CONDITION ERROR (PNW)...... 42 ITEM 4.3.4.9 PREVIOUS PLOT NUMBER (CORE 1.11) ...... 43 SUBSECTION 4.3.5 ADDITIONAL ITEMS...... 43 ITEM 4.3.5.1 LANDOWNER PLOT SUMMARY REQUEST (PNW) ...... 43 ITEM 4.3.5.2 TOPOGRAPHIC POSITION (PNW) ...... 43 ITEM 4.3.5.3 HORIZONTAL DISTANCE TO IMPROVED ROAD (CORE 1.15)...... 44 ITEM 4.3.5.4 ROAD ACCESS (PACI)...... 44 ITEM 4.3.5.5 RECREATION USE 1 (PACI) ...... 45 ITEM 4.3.5.6 RECREATION USE 2 (PACI) ...... 45 ITEM 4.3.5.7 RECREATION USE 3 (PACI) ...... 45 ITEM 4.3.5.8 WATER ON PLOT (CORE 1.16)...... 46 ITEM 4.3.5.9 PLOT NOTES (CORE 1.21) ...... 46 SUBSECTION 4.3.6 REFERENCE POINT ATTRIBUTES ...... 46 ITEM 4.3.6.1 RP TYPE (PNW) ...... 46 ITEM 4.3.6.2 RP SPECIES (PNW) ...... 47 ITEM 4.3.6.3 RP DIAMETER (PNW) ...... 47 ITEM 4.3.6.4 RP AZIMUTH (PNW)...... 47 ITEM 4.3.6.5 RP HORIZONTAL DISTANCE (PNW) ...... 47 ITEM 4.3.6.6 RP AZIMUTH/DISTANCE TO SUBPLOT NUMBER (PNW) ...... 47 ITEM 4.3.6.7 RP NOTES (PNW) ...... 47 SUBSECTION 4.3.7 ITEMS RECORDED ON THE PLOT CARD ...... 48 SECTION 4.4 GPS COORDINATES ...... 49 SUBSECTION 4.4.1 SURVEY GRADE GPS SUBPLOT COORDINATES ...... 49 SUBSECTION 4.4.2 REALTIME PLOT CENTER GPS COORDINATES ...... 49 SUBSECTION 4.4.3 GPS UNIT SETTINGS, DATUM, AND COORDINATE SYSTEM ...... 50 ITEM 4.4.3.1 GPS UNIT TYPE (CORE 1.19.3) ...... 50 ITEM 4.4.3.2 GPS SERIAL NUMBER (CORE 1.19.4) ...... 50 ITEM 4.4.3.3 GPS ENTRY METHOD (CORE 1.19.5) ...... 50 ITEM 4.4.3.4 GPS DATUM (CORE 1.19.6) ...... 50 ITEM 4.4.3.5 COORDINATE SYSTEM (CORE 1.19.7) ...... 51 ITEM 4.4.3.6 GPS LOCATION TYPE (PNW) ...... 51 ITEM 4.4.3.7 UTM ZONE (CORE 1.19.10)...... 52 ITEM 4.4.3.8 EASTING (X) UTM (CORE 1.19.11) ...... 52 ITEM 4.4.3.9 NORTHING (Y) UTM (CORE 1.19.12) ...... 52 ITEM 4.4.3.10 GPS ELEVATION (CORE 1.19.16)...... 52 ITEM 4.4.3.11 GPS ERROR (CORE 1.19.17) ...... 52 ITEM 4.4.3.12 NUMBER OF READINGS (CORE 1.19.18) ...... 52 ITEM 4.4.3.13 GPS FILENAME (CORE 1.19.19) ...... 53 ITEM 4.4.3.14 GPS NOTES (PNW) ...... 53 SUBSECTION 4.4.4 CORRECTION FOR OFFSET LOCATION ...... 53 ITEM 4.4.4.1 AZIMUTH TO PLOT CENTER (CORE 1.19.14) ...... 53 ITEM 4.4.4.2 DISTANCE TO PLOT CENTER (CORE 1.19.15) ...... 53 SUBSECTION 4.4.5 DOWNLOADED PLOT COORDINATES ...... 54 Table of Contents ITEM 4.4.5.1 PREVIOUS UTM ZONE (PACI, PFSL) ...... 54 ITEM 4.4.5.2 PREVIOUS EASTING (X) (PACI, PFSL)...... 54 ITEM 4.4.5.3 PREVIOUS NORTHING (Y) (PACI, PFSL) ...... 54 ITEM 4.4.5.4 PREVIOUS COORDINATES METHOD (PNW) ...... 54

CHAPTER 5 CONDITION CLASS ...... 57 SECTION 5.1 DETERMINATION OF CONDITION CLASS ...... 57 pg.IV SECTION 5.2 CONDITION CLASS STATUS DEFINITIONS ...... 58 SUBSECTION 5.2.1 ACCESSIBLE FOREST LAND ...... 58 SUBSECTION 5.2.2 NONFOREST LAND ...... 60 SUBSECTION 5.2.3 NONCENSUS WATER ...... 61 SUBSECTION 5.2.4 CENSUS WATER ...... 61 SUBSECTION 5.2.5 NONSAMPLED, POSSIBILITY OF FOREST ...... 62 SECTION 5.3 DELINEATING CONDITION CLASSES DIFFERING IN CONDITION CLASS STATUS ...... 63 SECTION 5.4 DELINEATING CONDITION CLASSES WITHIN ACCESSIBLE FOREST LAND ...... 66 SECTION 5.5 CONDITION CLASS ATTRIBUTES ...... 68 SUBSECTION 5.5.1 ACCESSIBLE FOREST LAND ...... 68 SECTION 5.6 CONDITION REMEASUREMENT ...... 68 SUBSECTION 5.6.1 CORRECTING PREVIOUS CREW ERROR ...... 69 SUBSECTION 5.6.2 RECONCILE CURRENT WITH PREVIOUS CONDITIONS ...... 73 SECTION 5.7 GENERAL CONDITION CLASS ATTRIBUTES...... 75 ITEM 5.7.0.1 CONDITION CLASS NUMBER (CORE 2.4.1) ...... 75 ITEM 5.7.0.2 PREVIOUS CONDITION CLASS NUMBER (PNW) ...... 75 ITEM 5.7.0.3 SUBPLOT CONDITION PROPORTION (PNW) ...... 75 ITEM 5.7.0.4 CONDITION CLASS STATUS (CORE 2.4.2) ...... 75 ITEM 5.7.0.5 PREVIOUS CONDITION CLASS STATUS (PNW)...... 76 ITEM 5.7.0.6 CONDITION CLASS STATUS RECONCILE CODE (PNW) ...... 76 ITEM 5.7.0.7 CONDITION CLASS STATUS PROCEDURAL CHANGE REASON CODE (PNW)...... 76 ITEM 5.7.0.8 NONFOREST CONDITION CLASS STATUS (CORE 2.4.4) ...... 76 ITEM 5.7.0.9 NONFOREST CONDITION NONSAMPLED REASON (CORE 2.4.5) ...... 77 ITEM 5.7.0.10 NONFOREST CONDITION CLASS SAMPLING STATUS (PNW) ...... 77 SUBSECTION 5.7.1 ACCESSIBLE FOREST LAND DELINEATING DATA ITEMS ...... 77 ITEM 5.7.1.1 RESERVED STATUS (CORE 2.5.1)...... 78 ITEM 5.7.1.2 PREVIOUS RESERVED STATUS (PNW) ...... 78 ITEM 5.7.1.3 RESERVED STATUS RECONCILE CODE (PNW) ...... 79 ITEM 5.7.1.4 RESERVED STATUS PROCEDURAL CHANGE REASON CODE (PNW) ...... 79 ITEM 5.7.1.5 OWNER GROUP (CORE 2.5.2) ...... 79 ITEM 5.7.1.6 PREVIOUS OWNER GROUP (PNW) ...... 79 ITEM 5.7.1.7 OWNER GROUP RECONCILE CODE (PNW) ...... 80 ITEM 5.7.1.8 OWNER GROUP PROCEDURAL CHANGE REASON CODE (PNW)...... 80 ITEM 5.7.1.9 FOREST TYPE (CORE 2.5.3)...... 80 ITEM 5.7.1.10 PREVIOUS FOREST TYPE (PNW) ...... 81 ITEM 5.7.1.11 STAND SIZE CLASS (CORE 2.5.4) ...... 81 ITEM 5.7.1.12 PREVIOUS STAND SIZE CLASS (PNW) ...... 82 ITEM 5.7.1.13 REGENERATION STATUS (CORE 2.5.5) ...... 83 ITEM 5.7.1.14 PREVIOUS REGENERATION STATUS (PNW) ...... 84 ITEM 5.7.1.15 TREE DENSITY (CORE 2.5.6) ...... 84 ITEM 5.7.1.16 PREVIOUS TREE DENSITY (PNW)...... 85 SUBSECTION 5.7.2 ANCILLARY (NON-DELINEATING) DATA ITEMS ...... 86 ITEM 5.7.2.1 OWNER CLASS (CORE OPTIONAL 2.5.8) ...... 86 ITEM 5.7.2.2 PREVIOUS OWNER CLASS (PNW)...... 86 ITEM 5.7.2.3 RESERVED AREA NAME (CORE 2.5.13) ...... 87 ITEM 5.7.2.4 ARTIFICIAL REGENERATION SPECIES (CORE 2.5.14) ...... 87 ITEM 5.7.2.5 PREVIOUS ARTIFICIAL REGENERATION SPECIES (PNW) ...... 87 ITEM 5.7.2.6 STAND AGE (CORE 2.5.15)...... 87 ITEM 5.7.2.7 PREVIOUS STAND AGE (PNW) ...... 88 ITEM 5.7.2.8 PHYSIOGRAPHIC CLASS (CORE 2.5.28)...... 89 ITEM 5.7.2.9 PREVIOUS PHYSIOGRAPHIC CLASS (PNW) ...... 90 ITEM 5.7.2.10 DOMINANT TREE SPECIES 1 (PACI) ...... 90

Table of Contents pg.V ITEM 5.7.2.11 PREVIOUS DOMINANT TREE SPECIES 1 (PACI) ...... 90 ITEM 5.7.2.12 DOMINANT TREE SPECIES 2 (PACI) ...... 90 ITEM 5.7.2.13 PREVIOUS DOMINANT TREE SPECIES 2 (PACI) ...... 91 ITEM 5.7.2.14 DOMINANT TREE SPECIES 3 (PACI) ...... 91 ITEM 5.7.2.15 PREVIOUS DOMINANT TREE SPECIES 3 (PACI) ...... 91 ITEM 5.7.2.16 DISTURBANCE 1 (CORE 2.5.16)...... 91 ITEM 5.7.2.17 PREVIOUS DISTURBANCE 1 (PNW) ...... 93 ITEM 5.7.2.18 DISTURBANCE YEAR 1 (CORE 2.5.17) ...... 94 ITEM 5.7.2.19 PREVIOUS DISTURBANCE YEAR 1 (PNW) ...... 94 ITEM 5.7.2.20 DISTURBANCE 2 (CORE 2.5.18)...... 94 ITEM 5.7.2.21 PREVIOUS DISTURBANCE 2 (PNW) ...... 94 ITEM 5.7.2.22 DISTURBANCE YEAR 2 (CORE 2.5.19) ...... 94 ITEM 5.7.2.23 PREVIOUS DISTURBANCE YEAR 2 (PNW) ...... 94 ITEM 5.7.2.24 DISTURBANCE 3 (CORE 2.5.20)...... 94 ITEM 5.7.2.25 PREVIOUS DISTURBANCE 3 (PNW) ...... 95 ITEM 5.7.2.26 DISTURBANCE YEAR 3 (CORE 2.5.21) ...... 95 ITEM 5.7.2.27 PREVIOUS DISTURBANCE YEAR 3 (PNW) ...... 95 ITEM 5.7.2.28 TREATMENT 1 (CORE 2.5.22)...... 95 ITEM 5.7.2.29 PREVIOUS TREATMENT 1 (PNW) ...... 96 ITEM 5.7.2.30 TREATMENT YEAR 1 (CORE 2.5.23) ...... 96 ITEM 5.7.2.31 PREVIOUS TREATMENT YEAR 1 (PNW) ...... 96 ITEM 5.7.2.32 TREATMENT 2 (CORE 2.5.24)...... 96 ITEM 5.7.2.33 PREVIOUS TREATMENT 2 (PNW) ...... 96 ITEM 5.7.2.34 TREATMENT YEAR 2 (CORE 2.5.25) ...... 97 ITEM 5.7.2.35 PREVIOUS TREATMENT YEAR 2 (PNW) ...... 97 ITEM 5.7.2.36 TREATMENT 3 (CORE 2.5.26)...... 97 ITEM 5.7.2.37 PREVIOUS TREATMENT 3 (PNW) ...... 97 ITEM 5.7.2.38 TREATMENT YEAR 3 (CORE 2.5.27) ...... 97 ITEM 5.7.2.39 PREVIOUS TREATMENT YEAR 3 (PNW) ...... 97 ITEM 5.7.2.40 CHAINING CODE (CORE 2.5.37)...... 97 ITEM 5.7.2.41 LAND COVER CLASS (CORE 2.5.29) ...... 98 SUBSECTION 5.7.3 DETERMINING CONDITION CLASSES ON NONFOREST LAND . . . .101 ITEM 5.7.3.1 PRESENT NONFOREST LAND USE (CORE 2.5.30) ...... 101 ITEM 5.7.3.2 PREVIOUS NONFOREST LAND USE (PNW) ...... 103 SECTION 5.8 DETERMINATION OF CROWN COVER VALUES FOR LAND USE CLASSIFICATION ...... 104 SUBSECTION 5.8.1 INTRODUCTION ...... 104 ITEM 5.8.1.1 CANOPY COVER SAMPLE METHOD (CORE 2.5.31)...... 104 ITEM 5.8.1.2 LIVE CANOPY COVER (CORE 2.5.32) ...... 106 ITEM 5.8.1.3 LIVE PLUS MISSING CANOPY COVER (CORE 2.5.33) ...... 106 ITEM 5.8.1.4 CURRENT AFFORESTATION CODE (CORE 2.5.34) ...... 106 ITEM 5.8.1.5 PREVIOUS AFFORESTATION CODE (CORE 2.5.35)...... 107 ITEM 5.8.1.6 TOTAL STEMS (CORE 2.5.36)...... 107 SECTION 5.9 CONDITION OWNERSHIP...... 108 ITEM 5.9.0.1 OWNER SHORT NAME (PACI, AFSL)...... 108 ITEM 5.9.0.2 OWNERSHIP TYPE (PACI, AFSL) ...... 108 ITEM 5.9.0.3 OWNER CONDITION LIST (PACI, AFSL) ...... 108 ITEM 5.9.0.4 OWNER NOTES (PACI, AFSL)...... 109

SECTION 5.10 NONSAMPLED CONDITION CLASS ATTRIBUTES...... 110 Table of Contents ITEM 5.10.0.1 CONDITION NONSAMPLED REASON (CORE 2.4.3) ...... 110 ITEM 5.10.0.2 PREVIOUS CONDITION NONSAMPLED REASON (PNW)...... 110 ITEM 5.10.0.3 NONSAMPLED FOREST TYPE (PNW) ...... 111 SECTION 5.11 CONDITION CLASS NOTES ...... 111 SUBSECTION 5.11.1 CONDITION CLASS NOTES ...... 111 ITEM 5.11.1.1 PREVIOUS CONDITION CLASS NOTES (PNW)...... 111 ITEM 5.11.1.2 CONDITION CLASS NOTES (PNW) ...... 111 pg.VI ITEM 5.11.1.3 CHANGE MATRIX NOTES (PNW) ...... 111

CHAPTER 6 SUBPLOT INFORMATION ...... 113 SECTION 6.1 RECORDING SUBPLOT INFORMATION ...... 113 SUBSECTION 6.1.1 SUBPLOT INFORMATION ...... 113 ITEM 6.1.1.1 SUBPLOT NUMBER (CORE 3.1) ...... 113 ITEM 6.1.1.2 PREVIOUS SUBPLOT MAPPING ERROR (PNW)...... 113 ITEM 6.1.1.3 SUBPLOT STATUS (CORE 3.2)...... 113 ITEM 6.1.1.4 SUBPLOT NONSAMPLED REASON (CORE 3.3) ...... 114 ITEM 6.1.1.5 NONFOREST SUBPLOT STATUS (CORE 3.4) ...... 114 ITEM 6.1.1.6 NONFOREST SUBPLOT NONSAMPLED REASON (CORE 3.5) ...... 115 ITEM 6.1.1.7 PREVIOUS SUBPLOT CENTER CONDITION (PNW) ...... 115 ITEM 6.1.1.8 SUBPLOT CENTER CONDITION (CORE 3.6)...... 115 ITEM 6.1.1.9 SUBPLOT CONDITION LIST (CORE 3.11) ...... 115 ITEM 6.1.1.10 MICROPLOT CENTER CONDITION (CORE 3.7) ...... 116 ITEM 6.1.1.11 PREVIOUS MICROPLOT CENTER CONDITION (PNW)...... 116 SUBSECTION 6.1.2 PHYSIOGRAPHIC CLASS INFORMATION ...... 117 ITEM 6.1.2.1 SUBPLOT SLOPE (CORE 3.8)...... 117 ITEM 6.1.2.2 SUBPLOT ASPECT (CORE 3.9)...... 117 ITEM 6.1.2.3 SLOPE SHAPE (PACI) ...... 118 ITEM 6.1.2.4 SLOPE POSITION (PACI) ...... 118 ITEM 6.1.2.5 SNOW/WATER DEPTH (CORE 3.10) ...... 119 ITEM 6.1.2.6 SUBPLOT NOTES (PNW)...... 119 SECTION 6.2 PIG DAMAGE...... 119 ITEM 6.2.0.1 SUBPLOT NUMBER OF PIG DAMAGE (PACI) ...... 119 ITEM 6.2.0.2 CONDITION CLASS NUMBER OF PIG DAMAGE (PACI) ...... 120 ITEM 6.2.0.3 PERCENT OF PIG DAMAGE ON SUBPLOT (PACI) ...... 120

CHAPTER 7 BOUNDARY REFERENCES ...... 121 SECTION 7.1 GENERAL INSTRUCTIONS...... 121 SECTION 7.2 REFERENCE PROCEDURE ...... 121 SUBSECTION 7.2.1 BOUNDARIES ON REMEASUREMENT PLOTS ...... 122 SUBSECTION 7.2.2 BOUNDARY DATA ...... 123 ITEM 7.2.2.1 SUBPLOT NUMBER (CORE 4.2.1) ...... 123 ITEM 7.2.2.2 PLOT TYPE (CORE 4.2.2) ...... 123 ITEM 7.2.2.3 PREVIOUS PLOT TYPE (PNW) ...... 123 ITEM 7.2.2.4 BOUNDARY CHANGE (CORE 4.2.3)...... 123 ITEM 7.2.2.5 CONTRASTING CONDITION (CORE 4.2.4) ...... 124 ITEM 7.2.2.6 PREVIOUS CONTRASTING CONDITION (PNW) ...... 124 ITEM 7.2.2.7 LEFT AZIMUTH (CORE 4.2.5) ...... 124 ITEM 7.2.2.8 PREVIOUS LEFT AZIMUTH (PNW) ...... 124 ITEM 7.2.2.9 CORNER AZIMUTH (CORE 4.2.6) ...... 124 ITEM 7.2.2.10 PREVIOUS CORNER AZIMUTH (PNW)...... 125 ITEM 7.2.2.11 CORNER DISTANCE (CORE 4.2.7)...... 125 ITEM 7.2.2.12 PREVIOUS CORNER DISTANCE (PNW) ...... 125 ITEM 7.2.2.13 RIGHT AZIMUTH (CORE 4.2.8) ...... 125 ITEM 7.2.2.14 PREVIOUS RIGHT AZIMUTH (PNW)...... 125 ITEM 7.2.2.15 BOUNDARY NOTES (PNW)...... 126

CHAPTER 8 TREE AND SAPLING DATA ...... 127 SECTION 8.1 DEFINITIONS ...... 127 SECTION 8.2 SELECTING TALLY TREES ...... 127

Table of Contents pg.VII SUBSECTION 8.2.1 WHERE TO TALLY ...... 127 SUBSECTION 8.2.2 WITHIN PLOT AREA CRITERIA ...... 128 SECTION 8.3 CONDUCTING THE TREE TALLY...... 129 SUBSECTION 8.3.1 SUBPLOT WITNESS TREES/OBJECTS ...... 129 SUBSECTION 8.3.2 SUBPLOTS/CONDITIONS WITHOUT TALLY TREES...... 129 SECTION 8.4 TREE TRACKING...... 130 SUBSECTION 8.4.1 TREE TRACKING DATA ITEMS...... 130 ITEM 8.4.1.1 SUBPLOT NUMBER (CORE 5.1) ...... 130 ITEM 8.4.1.2 TREE RECORD NUMBER (CORE 5.2) ...... 130 ITEM 8.4.1.3 TREE TAG NUMBER (PACI, PFSL) ...... 130 ITEM 8.4.1.4 PREVIOUS TREE TAG NUMBER (PACI, PFSL) ...... 131 ITEM 8.4.1.5 CONDITION CLASS NUMBER (CORE 5.3) ...... 131 ITEM 8.4.1.6 PREVIOUS CONDITION CLASS NUMBER (PNW) ...... 132 ITEM 8.4.1.7 PREVIOUS TREE STATUS (CORE 5.6) ...... 132 ITEM 8.4.1.8 PRESENT TREE STATUS (CORE 5.7) ...... 132 ITEM 8.4.1.9 SUBPLOT TALLY TREE WITNESS (PNW) ...... 133 ITEM 8.4.1.10 STANDING DEAD (CORE 5.7.2) ...... 133 ITEM 8.4.1.11 RECONCILE (CORE 5.7.1)...... 134 ITEM 8.4.1.12 SPECIES (CORE 5.8) ...... 136 ITEM 8.4.1.13 AZIMUTH (CORE 5.4)...... 137 ITEM 8.4.1.14 HORIZONTAL DISTANCE (CORE 5.5)...... 138 ITEM 8.4.1.15 SLOPE DISTANCE TO WITNESS TREE OR OBJECT (PNW) ...... 138 SECTION 8.5 DIAMETER ...... 138 SUBSECTION 8.5.1 MARKING CURRENT DIAMETER ...... 139 SUBSECTION 8.5.2 DIAMETER ON STUMPS ...... 140 SUBSECTION 8.5.3 DIAMETER AT BREAST HEIGHT ...... 140 ITEM 8.5.3.1 PREVIOUS DIAMETER AT BREAST HEIGHT (CORE 5.9.1) ...... 144 ITEM 8.5.3.2 DIAMETER AT BREAST HEIGHT (CORE 5.9.2) ...... 145 SUBSECTION 8.5.4 ADDITIONAL DIAMETER DATA ITEMS ...... 145 ITEM 8.5.4.1 DIAMETER CHECK (CORE 5.12)...... 145 ITEM 8.5.4.2 LENGTH TO DIAMETER MEASUREMENT POINT (CORE OPTIONAL 5.24) ...... 146 SECTION 8.6 ROOT MEASUREMENTS FOR TROPICAL TREES ...... 146 ITEM 8.6.0.1 TYPE OF ROOTING SYSTEM (PACI) ...... 146 ITEM 8.6.0.2 NUMBER OF TREES IN SHARED ROOT SYSTEM (PACI)...... 146 ITEM 8.6.0.3 ROOT DIAMETER 1 (PACI)...... 146 ITEM 8.6.0.4 ROOT DIAMETER 2 (PACI) ...... 147 ITEM 8.6.0.5 ROOTING HEIGHT (PACI) ...... 147 ITEM 8.6.0.6 PROP ROOT DENSITY (PACI)...... 147 ITEM 8.6.0.7 NUMBER OF BUTTRESSES (PACI) ...... 148 SECTION 8.7 TREE GROWTH ...... 148 SUBSECTION 8.7.1 TREE LENGTH ...... 148 ITEM 8.7.1.1 PREVIOUS ACTUAL LENGTH (PNW) ...... 148 ITEM 8.7.1.2 ACTUAL LENGTH (CORE 5.15)...... 148 ITEM 8.7.1.3 PREVIOUS TOTAL LENGTH (PNW) ...... 149 ITEM 8.7.1.4 TOTAL LENGTH (CORE 5.14) ...... 149

ITEM 8.7.1.5 LENGTH METHOD (CORE 5.16) ...... 150 Table of Contents ITEM 8.7.1.6 PREVIOUS LENGTH METHOD (PNW) ...... 150 SUBSECTION 8.7.2 TREE LIVE CROWN MEASUREMENTS ...... 150 ITEM 8.7.2.1 COMPACTED CROWN RATIO (CORE 5.19) ...... 150 ITEM 8.7.2.2 CROWN CLASS (CORE 5.17) ...... 153 ITEM 8.7.2.3 BRANCHING CHARACTERISTICS (PACI) ...... 154 ITEM 8.7.2.4 AERIAL ROOT DENSITY (PACI) ...... 155 SECTION 8.8 TREE DAMAGE ...... 155 ITEM 8.8.0.1 DAMAGE AGENT 1 (CORE 5.20.1...... 156 pg.VIII ITEM 8.8.0.2 DAMAGE AGENT 2 (CORE 5.20.2) ...... 160 ITEM 8.8.0.3 DAMAGE AGENT 3 (CORE 5.20.3) ...... 160 ITEM 8.8.0.4 EPIPHYTE LOADING (PACI) ...... 160 ITEM 8.8.0.5 PRIORITY DAMAGE (PACI) ...... 161 ITEM 8.8.0.6 PRIORITY DAMAGE SEVERITY (PACI) ...... 161 ITEM 8.8.0.7 ROTTEN/MISSING CULL (CORE 5.13) ...... 162 SUBSECTION 8.8.1 STANDING DEAD OR REMOVED ...... 164 ITEM 8.8.1.1 CAUSE OF DEATH (CORE 5.21) ...... 164 ITEM 8.8.1.2 DECAY CLASS (CORE 5.23) ...... 164 SECTION 8.9 CENTROID/SECOND DIAMETER ...... 166 ITEM 8.9.0.1 LENGTH TO CENTROID DIAMETER (PACI)...... 166 ITEM 8.9.0.2 ACTUAL LENGTH TO CENTROID DIAMETER (PACI) ...... 166 ITEM 8.9.0.3 CENTROID DIAMETER ON UPPER BOLE (PACI) ...... 166 ITEM 8.9.0.4 PREVIOUS SECOND DIAMETER ON UPPER BOLE (PACI) ...... 167 ITEM 8.9.0.5 SECOND DIAMETER ON UPPER BOLE (PACI) ...... 167 ITEM 8.9.0.6 PREVIOUS LENGTH TO SECOND DIAMETER (PACI)...... 167 SECTION 8.10 TREE NOTES ...... 167 SUBSECTION 8.10.1 TREE NOTES ...... 167 ITEM 8.10.1.1 TREE NOTES (CORE 5.27) ...... 167

CHAPTER 9 SEEDLING DATA ...... 169 SECTION 9.1 GENERAL INSTRUCTIONS...... 169 SUBSECTION 9.1.1 SEEDLING DATA ITEMS ...... 169 ITEM 9.1.1.1 SUBPLOT NUMBER (CORE 6.1) ...... 169 ITEM 9.1.1.2 CONDITION CLASS NUMBER (CORE 6.3) ...... 169 ITEM 9.1.1.3 SPECIES (CORE 6.2) ...... 169 ITEM 9.1.1.4 SEEDLING COUNT (CORE 6.4) ...... 170 ITEM 9.1.1.5 SEEDLING NOTES (PNW) ...... 170

CHAPTER 10 VEGETATION PROFILE ...... 171 SECTION 10.1 VEGETATION SAMPLING DESIGN ...... 171 SECTION 10.2 GENERAL DEFINITIONS...... 171 SECTION 10.3 VEGETATION DATA COLLECTION LOCATION ...... 175 SUBSECTION 10.3.1 SUBPLOT - LEVEL DATA ITEMS ...... 175 ITEM 10.3.1.1 SUBPLOT NUMBER (CORE OPTIONAL 8.4.1) ...... 175 ITEM 10.3.1.2 P2 VEG SUBPLOT SAMPLE STATUS (CORE OPTIONAL 8.4.2)...... 175 ITEM 10.3.1.3 VEGETATION NONSAMPLED REASON (CORE OPTIONAL 8.4.3)...... 175 ITEM 10.3.1.4 VEGETATION SUBPLOT NOTES (CORE OPTIONAL 8.4.5) ...... 176 SECTION 10.4 SPECIES COMPOSITION ...... 176 ITEM 10.4.0.1 SPECIES CODE (CORE OPTIONAL 8.6.2) ...... 178 ITEM 10.4.0.2 UNIQUE SPECIES NUMBER (CORE OPTIONAL 8.6.3) ...... 178 ITEM 10.4.0.3 SPECIES CODE TYPE (PNW) ...... 179 ITEM 10.4.0.4 SPECIES CODE STATUS (PNW)...... 179 ITEM 10.4.0.5 SPECIMEN OFFICIALLY COLLECTED (CORE OPTIONAL 8.6.6) ...... 179 ITEM 10.4.0.6 P2 SPECIMEN NOT COLLECTED REASON CODE (CORE OPTIONAL 8.6.8) ...... 179 ITEM 10.4.0.7 SPECIMEN LABEL NUMBER (CORE OPTIONAL 8.6.7)...... 180 ITEM 10.4.0.8 SPECIES GROWTH HABIT (CORE OPTIONAL 8.6.1) ...... 180 ITEM 10.4.0.9 SPECIES VEGETATION LAYER (CORE OPTIONAL 8.6.5) ...... 181 ITEM 10.4.0.10 SPECIES CANOPY COVER (CORE OPTIONAL 8.6.4)...... 181 ITEM 10.4.0.11 VEGETATION SPECIES NOTES (CORE OPTIONAL 8.6.9) ...... 181 SECTION 10.5 VEGETATION STRUCTURE ...... 182 ITEM 10.5.0.1 CONDITION CLASS NUMBER (CORE OPTIONAL 8.4.4)...... 182

Table of Contents pg.IX ITEM 10.5.0.2 TALLY TREE SPECIES COVER LAYER 1 (CORE OPTIONAL 8.5.1)...... 183 ITEM 10.5.0.3 TALLY TREE SPECIES COVER LAYER 2 (CORE OPTIONAL 8.5.2)...... 183 ITEM 10.5.0.4 TALLY TREE SPECIES COVER LAYER 3 (CORE OPTIONAL 8.5.3)...... 183 ITEM 10.5.0.5 TALLY TREE SPECIES COVER LAYER 4 (CORE OPTIONAL 8.5.4)...... 183 ITEM 10.5.0.6 TALLY TREE SPECIES COVER – AERIAL VIEW (CORE OPTIONAL 8.5.5) ...... 183 ITEM 10.5.0.7 NON-TALLY TREE SPECIES COVER LAYER 1 (CORE OPTIONAL 8.5.6) ...... 183 ITEM 10.5.0.8 NON-TALLY TREE SPECIES COVER LAYER 2 (CORE OPTIONAL 8.5.7) ...... 184 ITEM 10.5.0.9 NON-TALLY TREE SPECIES COVER LAYER 3 (CORE OPTIONAL 8.5.8) ...... 184 ITEM 10.5.0.10 NON-TALLY TREE SPECIES COVER LAYER 4 (CORE OPTIONAL 8.5.9) ...... 184 ITEM 10.5.0.11 NON-TALLY TREE SPECIES COVER – AERIAL VIEW (CORE OPTIONAL 8.5.2) . . . . . 184 ITEM 10.5.0.12 SHRUB AND WOODY VINE COVER LAYER 1 (CORE OPTIONAL 8.5.11) ...... 184 ITEM 10.5.0.13 SHRUB AND WOODY VINE COVER LAYER 2 (CORE OPTIONAL 8.5.12) ...... 184 ITEM 10.5.0.14 SHRUB AND WOODY VINE COVER LAYER 3 (CORE OPTIONAL 8.5.13) ...... 184 ITEM 10.5.0.15 SHRUB AND WOODY VINE COVER LAYER 4 (CORE OPTIONAL 8.5.14) ...... 184 ITEM 10.5.0.16 SHRUB AND WOODY VINE COVER—AERIAL VIEW (CORE OPTIONAL 8.5.15)...... 184 ITEM 10.5.0.17 FORB COVER LAYER 1 (CORE OPTIONAL 8.5.16)...... 185 ITEM 10.5.0.18 FORB COVER LAYER 2 (CORE OPTIONAL 8.5.17)...... 185 ITEM 10.5.0.19 FORB COVER LAYER 3 (CORE OPTIONAL 8.5.18)...... 185 ITEM 10.5.0.20 FORB COVER LAYER 4 (CORE OPTIONAL 8.5.19)...... 185 ITEM 10.5.0.21 FORB COVER—AERIAL VIEW (CORE OPTIONAL 8.5.20) ...... 185 ITEM 10.5.0.22 GRAMINOID COVER LAYER 1 (CORE OPTIONAL 8.5.21) ...... 185 ITEM 10.5.0.23 GRAMINOID COVER LAYER 2 (CORE OPTIONAL 8.5.22) ...... 185 ITEM 10.5.0.24 GRAMINOID COVER LAYER 3 (CORE OPTIONAL 8.5.23) ...... 185 ITEM 10.5.0.25 GRAMINOID COVER LAYER 4 (CORE OPTIONAL 8.5.24) ...... 186 ITEM 10.5.0.26 GRAMINOID COVER—AERIAL VIEW (CORE OPTIONAL 8.5.25) ...... 186 ITEM 10.5.0.27 MOSS/BRYOPHYTE COVER LAYER 1 (PACI) ...... 186

CHAPTER 11 INVASIVE PLANTS ...... 187 SECTION 11.1 INVASIVE SPECIES SAMPLE DESIGN ...... 187 SECTION 11.2 SPECIES RECORDS ...... 187 SUBSECTION 11.2.1 INVASIVE SPECIES DATA ITEMS...... 187 ITEM 11.2.1.1 SUBPLOT NUMBER (CORE OPTIONAL 9.4) ...... 187 ITEM 11.2.1.2 INVASIVE PLANT SUBPLOT SAMPLE STATUS (CORE OPTIONAL 9.5) ...... 188 ITEM 11.2.1.3 INVASIVE PLANT NONSAMPLED REASON (CORE OPTIONAL 9.6) ...... 188 ITEM 11.2.1.4 INVASIVE PLANT DATA NOTES (CORE OPTIONAL 9.7) ...... 188 ITEM 11.2.1.5 CONDITION CLASS NUMBER (CORE OPTIONAL 9.8) ...... 188 ITEM 11.2.1.6 SPECIES CODE (CORE OPTIONAL 9.9)...... 189 ITEM 11.2.1.7 UNIQUE SPECIES NUMBER (CORE OPTIONAL 9.10) ...... 190 ITEM 11.2.1.8 SPECIES CODE TYPE (PNW) ...... 190 ITEM 11.2.1.9 SPECIES CODE STATUS (PNW)...... 191 ITEM 11.2.1.10 SPECIES CANOPY COVER (CORE OPTIONAL 9.11) ...... 191 ITEM 11.2.1.11 INVASIVE SPECIMEN COLLECTED (CORE OPTIONAL 9.13)...... 191 ITEM 11.2.1.12 SPECIMEN LABEL NUMBER (CORE OPTIONAL 9.14) ...... 192 ITEM 11.2.1.13 INVASIVE PLANT NOTES (CORE OPTIONAL 9.15)...... 192

APPENDIX A REFERENCE INFORMATION...... 193 SECTION A.1 COUNTY AND STATE FIPS CODES ...... 193 Table of Contents SECTION A.2 FIPS CODES, UTM ZONES, AND DECLINATIONS ...... 195 SECTION A.3 SLOPE CORRECTION TABLE ...... 197 SECTION A.4 METRIC EQUIVALENTS AND AIDS ...... 198

APPENDIX B TREE SPECIES LIST ...... 199 pg.X SECTION B.1 TREE SPECIES LIST ...... 199 SECTION B.2 FSM TREE SPECIES LIST BY COMMON NAME ...... 210 SECTION B.3 FSM TREE SPECIES LIST BY NEW NIMS CODE ...... 217 SECTION B.4 FSM TREE SPECIES LIST BY OLD NIMS CODE ...... 229 SECTION B.5 FSM TREE SPECIES LIST BY SCIENTIFIC NAME...... 240

APPENDIX C TREE CODING GUIDE ...... 273

APPENDIX D DAMAGE CODES ...... 277 SECTION D.1 DAMAGE CODES...... 277

APPENDIX E RESERVED AND ADMINISTRATIVELY WITHDRAWN STATUS BY OWNER AND LAND DESIGNATION ...... 281

APPENDIX F QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) ...... 283 SUBSECTION F.0.1 PNW QC CHECK PLOT FREQUENCY ...... 283 SECTION F.1 QA/QC PLOTS TYPES ...... 283 SECTION F.2 QA/QC CHECK PLOT SELECTION ...... 283 SECTION F.3 CO-LOCATED BLIND AND COLD CHECK PROCEDURES ...... 284 SUBSECTION F.3.1 BLIND CHECK FIELD PROCEDURES ...... 284 SUBSECTION F.3.2 COLD CHECK PROCEDURES...... 284 SUBSECTION F.3.3 INTEGRITY OF QA/QC CHECK PLOT DATA ...... 285 SECTION F.4 DOWNLOADING BLIND AND COLD CHECK DATA...... 285 SECTION F.5 COLD CHECK REVIEW SESSION...... 285

APPENDIX G GPS OPERATING GUIDE...... 287 SECTION G.1 OVERVIEW...... 287 SECTION G.2 TRIMBLE GEOXH 6000 UNIT ...... 287 SUBSECTION G.2.1 COLLECTING A SUBPLOT ROVER FILE WITH THE GEOXH UNIT. 287 SUBSECTION G.2.2 CREATING A DUMMY ROVER FILE WITH THE GEOXH UNIT . . . . . 289 SUBSECTION G.2.3 DISPLAYING COORDINATES FOR PLOT CENTER (OPTIONAL) . . 289 SUBSECTION G.2.4 NAVIGATING WITH WAYPOINTS ...... 290 SUBSECTION G.2.5 DOWNLOADING SUBPLOT GEOXH ROVER FILES TO LAPTOP . . 290 SUBSECTION G.2.6 DELETING SUBPLOT GPS FILES FROM THE GEOXH ...... 291 SUBSECTION G.2.7 CHARGING THE GEOXH BATTERY...... 291 SUBSECTION G.2.8 UPDATING THE GEOXH CONFIGURATION FILES ...... 292 SECTION G.3 GARMIN GPSMAP 76CX ...... 292 SUBSECTION G.3.1 GPS KEYPAD LAYOUT AND COMMANDS ...... 292 SUBSECTION G.3.2 GPS UNIT SETUP ...... 293 SUBSECTION G.3.3 MAIN MENU PAGES ...... 293 SUBSECTION G.3.4 CUSTOMIZING NAVIGATION SCREENS...... 294 SUBSECTION G.3.5 OPERATING THE GPS ON PLOT...... 294

Table of Contents pg.XI SECTION G.4 WAYPOINTS...... 294 SUBSECTION G.4.1 CREATING A WAYPOINT (WHEN COORDINATES PROVIDED) . . . 294 SUBSECTION G.4.2 MARKING (STORING) CURRENT LOCATION AS A WAYPOINT. . . 295 SUBSECTION G.4.3 NAMING WAYPOINTS...... 295 SECTION G.5 NAVIGATING WITH THE GPS...... 295 SECTION G.6 RECORDING GPS INFORMATION ...... 296 SECTION G.7 BATTERIES ...... 296

APPENDIX H LASER 200 INSTRUCTIONS ...... 297 SECTION H.1 OVERVIEW ...... 297 SECTION H.2 BASIC OPERATION...... 297 SECTION H.3 SETTINGS ...... 297 SECTION H.4 FILTER AND REFLECTORS ...... 298 SECTION H.5 DISTANCE AND PERCENT SLOPE ...... 298 SECTION H.6 TREE HEIGHTS ...... 298 SECTION H.7 GATES ...... 298 SECTION H.8 CUMULATIVE DISTANCES ...... 299

APPENDIX I CRITERION RD 1000 ELECTRONIC RELASKOP USER GUIDE 301 SECTION I.1 LOW BATTERY WARNING ...... 301 SECTION I.2 BUTTONS...... 301 SECTION I.3 KEY PAD ...... 302 SECTION I.4 OTHER BUTTONS ...... 303 SECTION I.5 DENDROMETER FUNCTIONS ...... 303 SUBSECTION I.5.1 DIAMETER MODE ...... 303 SECTION I.6 ERROR CODES ...... 305

APPENDIX J PLOT JACKET...... 307 SECTION J.1 PLOT LABELS ...... 307 SECTION J.2 PLOT CARD ...... 307 SUBSECTION J.2.1 HEADER ...... 307

SUBSECTION J.2.2 RP DATA...... 307 Table of Contents SUBSECTION J.2.3 PLOT TRAVEL TIME...... 307 SUBSECTION J.2.4 PLOT ACCESS DESCRIPTION ...... 308 SUBSECTION J.2.5 PLOT NARRATIVE DESCRIPTION ...... 308 SUBSECTION J.2.6 PLOT DIAGRAM ...... 310 SUBSECTION J.2.7 FIELD NOTES ...... 310 SUBSECTION J.2.8 LOCATION ...... 310 SECTION J.3 PHOTO WORK FORMATTING ...... 310 pg.XII SECTION J.4 LANDOWNER PERMISSION LETTER...... 311

APPENDIX K REFERENCE FIELD TECHNIQUES ...... 313 SECTION K.1 MEASURING HEIGHTS USING A CLINOMETER...... 313 SECTION K.2 CALCULATING HORIZONTAL DISTANCE ...... 314 SECTION K.3 EXAMPLE OF BANYAN TREE MEASUREMENTS...... 315 SECTION K.4 DETERMINING SCALES AND BASELINES FROM A MAP OR PHOTO ...... 316 SUBSECTION K.4.1 DETERMINING SCALE MEASURING OBJECT OF KNOWN SIZE ON MAP OR PHOTO ...... 316 SUBSECTION K.4.2 DETERMINING SCALE BY COMPARING WITH ANOTHER MAP OR PHOTO OF KNOWN SCALE ...... 317 SUBSECTION K.4.3 CALCULATING A BASELINE ON A MAP OR PHOTO ...... 317

APPENDIX L PLOT FORMS...... 319 SECTION L.1 PLOT LEVEL DATA ...... 319 SECTION L.2 CONDITION CLASS ...... 321 SECTION L.3 SUBPLOT INFORMATION ...... 323 SECTION L.4 BOUNDARY REFERENCES...... 324 SECTION L.5 TREE AND SAPLING DATA...... 325 SECTION L.6 SEEDLING DATA ...... 327 SECTION L.7 VEGETATION SPECIES COMPOSITION...... 328 SECTION L.8 VEGETATION STRUCTURE...... 329 SECTION L.9 INVASIVE SPECIES ...... 329 SECTION L.10 LOCATION RECORD ...... 330

APPENDIX M OWNER CONTACT ...... 333 SECTION M.1 HELLO LETTER...... 333 SECTION M.2 LANDOWNER CONTACT LETTER/DATA CONFIDENTIALITY . . . 334 SECTION M.3 RELEASE ...... 335

APPENDIX N EQUIPMENT CHECKLIST ...... 337 SECTION N.1 DATA RECORDING ITEMS ...... 337 SECTION N.2 PHOTO INTERPRETATION ITEMS ...... 337 SECTION N.3 PLOT MEASURING ITEMS ...... 337 SECTION N.4 PLOT REFERENCING ITEMS ...... 337 SECTION N.5 FIRST AID ITEMS ...... 337

Table of Contents pg.XIII SECTION N.6 PERSONAL AND SAFETY GEAR ...... 338 SECTION N.7 CAMPING GEAR WHEN APPLICABLE: ...... 338

APPENDIX O SUMMARY OF MANUAL CHANGES...... 339

APPENDIX P CORE 7.0 CHANGES ...... 341

GLOSSARY ...... 347 Table of Contents pg.XIV : pg.13 CHAPTER 1 INTRODUCTION

This manual documents data collection procedures, codes, standards, and definitions used by the Pacific Northwest Research Station, Forest Inventory and Analysis (PNW-FIA) program in the 2016 forest inventory of the Federated States of Micronesia. PNW-FIA is one of four United States Department of Agriculture (USDA) Forest Service, FIA programs across the country which conducts forest inventories in most of the 50 states and in the Pacific Islands. PNW-FIA is responsible for inventorying the forest resources of Alaska, California, Hawaii, Oregon, Washington, and the Pacific Islands. Field data collection within PNW-FIA is completed by two data collection units: the Portland Forestry Sciences Laboratory (PFSL) and the Anchorage Forestry Sciences Laboratory (AFSL). PFSL is based in Portland, Oregon and is responsible for California, Oregon, and Washington. AFSL is based in Anchorage, Alaska and is responsible for Alaska, Hawaii and the U.S.-affiliated Pacific Islands. Nationally consistent and uniform Core data measurements are assured by following the procedures outlined in the Forest Inventory and Analysis National Core Field Guide. In addition to the Core data items required by the national FIA program, PNW-FIA measures regional data items that are of interest to the clients and customers of the PNW Research Station.

SECTION 1.1 ORGANIZATION OF THIS MANUAL This manual is structured primarily for use by field personnel. Each chapter corresponds either to a separate function that must be performed in locating and measuring a field plot, or to a particular aspect of data recording that must be completed. Procedures are ordered to coincide, as much as possible, with the order in which field data are collected and entered into the data recorder. Core field data collection procedures, listed in the Forest Inventory and Analysis National Core Field Guide, Version 6.1, have been incorporated into this manual. Instructions that are single underlined, tables that are shaded, and data item names followed by CORE and the Core chapter/section number in bold and parentheses, describe data items or field procedures included in the Core field guide. Any regional adjustments are noted in italic font within the underlined text or shaded table. Note: all scientific names are shown in italic font. Portions of this manual that are not underlined or shaded describe regional procedures which supplement national Core data. Regional data item names are followed, in bold and parentheses, by the specific inventory (i.e., PACI, AFSL, PFSL) or by PNW if the data item applies to all three PNW inventories. When data items are referenced within chapter text, the data item name will appear in all capital letters (e.g., “Record the CONDITION CLASS NUMBER of the condition class in which each tree is located.”). Database codes have been included in brackets following the data item name. National Information Management System (NIMS) codes are listed for Core data items and regional database codes are listed for regional data items. Note: Core data items containing regional additions (e.g., values, codes) will list “CORE” as the source, but brackets will contain regional database codes; national database codes will be populated from the regional database. The following examples show how data items will be displayed depending on the source (i.e., Core or regional) of the data item: ITEM NUMBER; DATA ITEM NAME; (SOURCE); [TABLE.COLUMN NAME]

ITEM X.X.X.X CONDITION CLASS NUMBER (CORE 5.3) [COND.CONDID]...... Core Chapter 1: ITEM X.X.X.X PRP TYPE (PNW) [TREE.PREV_HT_PNWRS]...... PACI, AFSL and PFSL ITEM X.X.X.X ROAD ACCESS (PACI) [PLOT.RDUSECD]...... PACI only ITEM X.X.X.X TREE TAG NUMBER (PACI, PFSL) [TREE.TAG_NO_PNWRS]...... PACI and PFSL only In addition, the following information is given for each data item: INTRODUCTION When collected: Specific criteria for when data item is recorded Field width: X digits Tolerance: Acceptable range of measurement Values: Legal values/codes for data items pg.14 SECTION 1.2 THE INVENTORY The national FIA program consists of three phases. Phase 1 (P1) is a remote sensing phase aimed at classifying all land into forest and nonforest. Phase 2 (P2) consists of a set of field sample locations distributed across the landscape with approximately one sample location (FIA plot) for every 6,000 acres at standard intensification. Forested sample locations are visited by field crews that collect a variety of forest ecosystem data. Nonforest locations are visited, as necessary, to quantify rates of land use change or to measure regional data items, when specified. This field manual describes the P2 process. Phase 3 (P3) consists of a subset of the phase 2 plots (approximately one every 96,000 acres), which are visited during the growing season in order to collect an extended suite of ecological data including full vegetation census, tree and crown condition, soil data, lichen diversity, coarse woody material, and ozone injury. Data are collected on a subset of plots in all states every year (i.e., annual inventory), as opposed to the historical FIA approach of sampling states sequentially in a cycle (i.e., periodic inventory).

SECTION 1.3 PRODUCTS PNW-FIA reports on the status and trends of forests in Alaska, Washington, Oregon, California, Hawaii and the Pacific Islands, and provides information sought by resource planners, policy analysts, and others involved in forest resource decision-making. Data collected in PNW-FIA inventories are summarized, interpreted, analyzed, and published in analytical reports and research articles of national, state, regional, and sub-regional scope. Information is presented by forest land and owner classes for land use change; timber volume, growth, mortality, and removals; potential forest productivity; opportunities for silvicultural treatment; and type and area of wildlife habitats. The data collected in these inventories represent a wealth of information that can answer questions about the status and trend of forest ecosystems, distribution of plant species and their relationship to the environment, the incidence of insects and disease in relation to forest type and condition, changes in forest structure and productivity resulting from disturbance, and improved prediction of forest growth and development on different sites and in response to management.

SECTION 1.4 UNITS OF MEASURE The PNW-FIA program uses ENGLISH units as the measurement system.

SECTION 1.5 PLOT DESIGN GENERAL DESCRIPTION The Core ground plot consists of four subplots approximately 1/24 acre in size with a radius of 24.0 feet horizontal. The center subplot is subplot 1. Subplots 2, 3, and 4 are located 120.0 feet horizontal at azimuths of 360, 120, and 240 degrees, respectively, from the center of subplot 1 (see Figure 1.1). Throughout this field guide, the use of the word ‘plot’ refers to the entire set of four subplots. ‘Plot center’ is defined as the center of subplot 1. Each subplot contains a microplot of approximately 1/300 acre in size with a radius of 6.8 feet horizontal. The center of the microplot is offset 90 degrees and 12.0 feet horizontal from each subplot center. Microplots are numbered in the same way as subplots. In the PNW-FIA annual inventory, the four subplots are laid out in the pattern shown in Figure 1.1; subplots are never “substituted” or “moved” in order to keep the entire subplot within a homogeneous condition. THE INVENTORY : Section 1.2 pg.15 SUBSECTION 1.5.1 PLOT LAYOUT

Figure 1.1: FIA Phase 2 plot diagram

SUBSECTION 1.5.2 DATA ARE COLLECTED ON PLOTS AT THE FOLLOWING LEVELS Plot- Data that describe the entire cluster of four subplots. Microplot - Data that describe a small area within a subplot. Subplot - Data that describe a single subplot of a cluster. Condition Class - A discrete combination of landscape attributes that describe the environment on all or part of the plot. These attributes include: 1. CONDITION CLASS STATUS 2. RESERVED STATUS 3. OWNER GROUP 4. FOREST TYPE 5. STAND SIZE CLASS 6. REGENERATION STATUS 7. TREE DENSITY Chapter 1: Boundary - An approximate description of the demarcation line between two condition classes that occur on a single subplot or microplot. There is no boundary recorded when the demarcation occurs beyond the fixed-radius plots. Tree - Data describing live saplings with a diameter 1.0 inch through 4.9 inches, and live or dead trees with diameter greater than or equal to 5.0 inches. INTRODUCTION Seedling - Data describing live trees with a diameter less than 1.0 inch and greater than or equal to 0.5 feet in length (conifers) or greater than or equal to 1.0 feet in length (hardwoods). Vegetation - Data describing plant composition and cover. Invasive Species - Data describing presence and abundance of invasive plant species. pg.16 SECTION 1.6 QUALITY ASSURANCE/QUALITY CONTROL

SUBSECTION 1.6.1 GENERAL DESCRIPTION The goal of the FIA Quality Assurance/Quality Control (QA/QC) program is to ensure that all resource inventory data are scientifically sound, of known quality, and are thoroughly documented. Measurement quality objectives (MQO) are established as standards to define data quality. The PNW-FIA QA/QC staff works to continually improve the PNW-FIA inventory process by controlling, identifying, and documenting errors and sources of variability that could be detrimental to the quality of PNW-FIA inventory results. Emphasis is placed on extensive crew training, field inspections, and documentation of protocols and procedures used in the inventory. Measurement quality and consistency are assessed by using three methods: hot checks, cold checks, and blind plots (see Appendix F for inspection plot descriptions). Periodic on-site inspections of field locations are conducted to ensure that the field work is being performed with the required accuracy and precision. Specifically, objectives of field checking are: 1. To obtain uniform and consistent interpretation and application of field instructions among all field crews. 2. To minimize technique errors. 3. To check the performance of each individual crew member. 4. To reveal inadequacies in the instructions and in the training program. 5. To assess and document the quality (accuracy, precision, completeness) of field data.

SECTION 1.7 SAFETY Safety is the number one priority within the PNW-FIA program. Personnel working in the field are subject to many safety hazards. Each person must always be conscious of these hazards to avoid accidents: 1. Don't take chances! 2. Eliminate horseplay and carelessness! 3. Think safety! 4. No task is more important than personal safety! 5. Always make sure that someone else knows where you plan to work each day!

SUBSECTION 1.7.1 SAFETY IN THE WOODS • Wear protective clothing: Long-sleeved shirts, long pants, and gloves may protect you from contact with brush and rocks, poisonous plants, and stinging insects. Trouser legs should be loose enough to avoid binding or cramping, and should not have cuffs. Wear a hardhat at all times in the woods. During hunting seasons, wear bright red or orange clothing. • Wear good quality boots that provide good support and traction. For example: 8-inch high leather work boots with lug-soles (Vibram-type soles). • Walk, don't run in the woods. Take your time and plan your route. Avoid plunging through the brush. The best route of travel may not be the shortest. Routes across brushy, irregular terrain with rocks and down logs can be hazardous. • Be watchful of twigs and branches, which may cause eye injury. Be especially alert when stepping up to trees which retain their small dead twigs. Keep a sufficient distance behind the person ahead of you to avoid being slapped by branches. • Lift knees high to clear obstacles in heavy undergrowth or slash. Slow down and watch your step. • When contouring a steep slope, do not lean into the hill. This tends to loosen footing. Erect posture or slightly leaning out gives more secure footing. • Know how to fall to avoid hard impacts. Keep flexible with knees slightly bent. If you feel yourself QUALITY ASSURANCE/QUALITY CONTROL

: slipping, pick a landing spot. Do not stick your arms out to break a fall. Roll with the fall. Try to take the impact on the side of your body rather than your back. • Don't take chances by walking across ravines on small logs. Section 1.6 pg.17 • Bee aware. Keep an eye out for yellow jacket and hornet activity. Yellow jackets nest in the ground, often in well-decayed logs or in thick moss on trees or in snag cavities. Yellow jackets are particularly active (nasty) during late summer and early fall when forest conditions are very dry. Hornets nest above ground in "paper" nests that are suspended from branches; woe befalls those who unwittingly bump their head against a nest, or shake the sapling from which a nest is suspended. If allergic to insect stings, carry medication to counteract the effects of stings. Let co-workers know about your allergies and how they can assist in an emergency. • Keep hatchets in their sheath except when actually using them, and snap the sheath shut. • First Aid. Keep your individual first-aid kit completely supplied, and know how to use it. Treat all wounds promptly. • Carry plenty of water. Don't expect your partner to carry water for you. • Beware of lightning. Watch for approaching storms. Avoid prominent high exposed ground and tall/lone trees. Abandon field gear, especially that made of metal. Seek shelter in the vehicle if possible, otherwise in thick timber, large caves or in valley bottoms. Crouch on the balls of your feet with your head covered. Separate 100 feet from other crew members.

SUBSECTION 1.7.2 SAFETY ON THE ROAD It all pays the same, so drive with care, with courtesy (regardless of others' actions), and with common sense. Follow these tips: • Seat belt use is required in all government-owned or leased vehicles. Do not ride in the back of pickups. • Cell phone use is prohibited while driving a government vehicle; pull off the road and park in a safe location to use a cell phone. • Drive defensively! Expect the other person, whether a vehicle operator or a pedestrian, to do the worst thing and be prepared. Observe all speed regulations and traffic signs. • Do not drive when sleepy, taking medication, or when other personal conditions make it unsafe to drive a vehicle. Get someone else to drive or, if alone, stop driving and nap (out of the public view). • Always drive with your headlights on. This practice increases the visibility of your vehicle. It is particularly important when driving in fog, on dusty roads, traveling in and out of shadows, and any other low light/visibility situations. Turn lights off when you park the vehicle. • Do not operate a vehicle in an unsafe condition. Check your vehicle frequently to keep it in good mechanical condition. Lights, horn, steering, and brakes should be kept in proper adjustment at all times. Make necessary repairs as soon as unsafe condition develops. Report any unsafe conditions to your supervisor. • Keep the vehicle clean. Windows, mirrors, and lights should be kept clean and free of obstructions to increase visibility. Keep the cab and driver area clean so material is not rolling under pedals or distracting the driver.

SUBSECTION 1.7.3 WHAT TO DO IF INJURED • Treat the injury promptly. If immediate medical attention is required, go directly to a hospital emergency room. Try to make contact with your supervisor or the office to get instructions and assistance. Make sure the doctor fills out his/her part on the CA-1 form. • Inform your supervisor of all injuries and ask which, if any, forms need to be filled out. Supervisors must inform the office at the earliest opportunity. Chapter 1: • Fill out Federal accident forms completely with signatures. ALWAYS make a copy for your personal records. Give the completed forms to your supervisor. Have the supervisor check your entries for mistakes, fill out their section, and forward the completed forms to the appropriate person. • Gather Information. If you are in a multi-vehicle accident, provide the other parties with enough written information so that they can easily get in touch with you, your crew supervisor, and the office. In turn, INTRODUCTION you must get the following information from all involved parties and witnesses—names, addresses, phone numbers, vehicle license numbers, driver's license numbers, insurance company names and policy numbers, and police report numbers. If possible, do not admit responsibility without first contacting your supervisor. pg.18 SAFETY : Section 1.7 pg.19 CHAPTER 2 LOCATING THE PLOT This chapter describes the steps taken to locate and establish new FIA plots, and to locate and remeasure previously established FIA plots. Establishing the plot location is the crucial first step in collecting valid field data. While measurements at each location are used to compile statistical information for the entire inventory, each location is also compared to information derived from processing remotely sensed (e.g., satellite, aircraft) data for the same location. Because these two sampling layers must measure attributes on the same location, the ground sample must be located as accurately as possible.

SECTION 2.1 LOCATING AN ESTABLISHED PLOT Established plots include: • Annual inventory (P2) remeasurement plots (SAMPLE KIND = 2, Item 4.3.4.7) The first step in relocating a previously established plot is to find the ground location of plot center (PC) marked on the photos; use resources such as photos, maps/drawings, written descriptions, GPS coordinates (Section 4.4), and reference point (RP) data. Each field crew should have a map with the location of the plots marked and identified with the plot number, and a plot jacket for each plot that may be visited. Use the available resources to reach the general vicinity of the plot. All previously established plots should have an RP from which a slope distance and azimuth to the plot center (PC) was recorded. This distance and azimuth can be followed from the RP to relocate the PC. When a previously established plot is difficult to find use the following procedures to re-establish the plot for remeasurement: • If no trees exist: Use photos, maps, and GPS to verify plot location and treat plot as remeasurement. • If a major disturbance has occurred with no trees or monumentation remaining: Use photos, maps, and GPS to verify the plot location and consider it a remeasurement plot. • If some monumentation is present, but not all the trees are found: The plot should be re-established and remeasurement protocol followed.

SUBSECTION 2.1.1 NAVIGATING WITH PHOTOGRAPHY The plot jacket for each field plot will usually contain photos, supplemental imagery, and maps. The plot center is pinpricked and circled on the old photos. Photo pinpricks must be transferred onto new photos without error. Use both new and old photos to proceed to the plot area when revisiting established plots. Some photos will be marked with a point-of-departure (POD). They are usually near a road and indicate how the crew approached the plot at a previous visit. In some cases, it may be easier to locate an established plot by heading directly to the plot rather than to the RP because within the plot area there may be numerous "signs" to detect (e.g., trees with reference tags, tree numbers, diameter nails). In searching for the plot, you may find a tagged/numbered tree on one of the subplots; use the plot data from previous visits to determine which subplot you are on. Chapter 2: SUBSECTION 2.1.2 NAVIGATING WITH GPS Plots visited previously will, in most cases, have field collected GPS coordinates. When using GPS coordinates to navigate, ensure coordinates are entered accurately into the GPS unit using the correct datum and follow your progress on the photo. Compare the GPS navigation readings to other plot location data such as RP to PC distance and azimuth to confirm direction of travel. LOCATING THE PLOT If during GPS navigation to the plot you encounter anything that could affect a future crew’s travel or safety (e.g., passage around cliffs, shallow stream crossings, illicit activities, game trails, etc.) create a waypoint. Record the waypoint coordinates (Subsection 4.4.3) and provide an explanation in the electronic GPS NOTES. Refer to Appendix G, GPS Operating Guide, for operation instructions for specific GPS units. pg.20 SUBSECTION 2.1.3 NAVIGATING WITH REFERENCE POINT (RP) DATA Reference points have been established on most previously visited plots; slope distance and azimuth from the RP to the PC were recorded. On some plots, the previous RP referenced a subplot center other than subplot 1, the pinpricked location; on these plots, the plot center monument was still installed at the pinpricked location. See Section 3.3 for monumentation details. Species, diameter at breast height (DBH) (to the nearest centimeter on periodic PNW-FIA plots), azimuth from RP to PC, and slope distance from RP to PC, were recorded on the plot card and on the photo used at the previous visit, and will be in the previous data printout. The RP will be monumented with square aluminum tags (non-tree RP monumentation will vary). An RP tree will have three square aluminum tags; two at approximately six feet above ground (facing crew’s approach), and one below stump height (facing plot center). Though measuring the distance and azimuth from the RP to the PC may be time consuming, if done carefully, it is a reliable method for relocating field plots. Before measuring from the RP to the plot center, check photos to see if the azimuth and distance seem reasonable. If reliable GPS coordinates exist, GPS distance and azimuth can be compared to RP data distance and azimuth.

SUBSECTION 2.1.4 REVERSE REFERENCE POINT (RP) METHOD If the RP cannot be found, but the plot center is found, locate a new RP after remeasuring the plot (time permitting). The tree/object selected should be visible on the photo, preferably between the LZ and PC. Record new RP data using the following method: • If GPS coverage is very good, collect coordinates for the new RP. Use the ROUTE function on the GPS to determine the HD and AZ from RP to PC after both PC and RP coordinates have been collected and saved in the GPS unit. Use the navigation function on the GPS receiver to get an azimuth and horizontal distance from the new RP to the collected PC coordinates. Record all the usual RP data in the RP section of the plot card and label them “GPS” to indicate that azimuth and horizontal distance were not measured with a compass and tape. These data must also be entered into the data recorder. Pinprick the new RP on the best photo available and record the RP data on the back of the photo; label these data with the method (GPS) used to determine the azimuth and horizontal distance to the new RP.

SECTION 2.2 ESTABLISHED PLOT ISSUES See Section 2.1, Locating an Established Plot, for definition of established plots.

SUBSECTION 2.2.1 DIFFICULTY FINDING ESTABLISHED PLOTS If an established plot cannot be found, follow these steps: 1. Return to the last known point on the route to the plot. Plan a route to the pinpricked plot center; divide the route into stages with a physical feature at the end of each stage which can be identified on the photos and confirmed on the ground. Proceed stage by stage, confirming the endpoint of the previous stage before proceeding to the next. The endpoint of the last stage should correspond with the pinpricked location, and be monumented with a center stake and witness trees/snags/stumps/objects. If the plot cannot be found, continue with the following steps. 2. Look for stream confluences, ridges, openings, groups of large trees, old skid roads, large snags, etc. on the ground, to confirm you are at the pinpricked location. 3. Try to locate the area where previous crews might have been when they thought they were at the pinpricked location. Check the previous plot card for remarks providing insight on plot location such as: "Plot center moved back 20 feet on same azimuth to agree with photo pinprick". Look for other indicators such as: • Stand type and size of trees ESTABLISHED PLOT ISSUES

: • The size and species of the RP and subplot 1 witness trees • Direction of travel from the RP (it could be 180 degrees off) • Slope and aspect Section 2.2 pg.21 4. Previous plot access information (Route to RP and RP Information) should be compared with the original photo pinprick. If these two plot references do not correlate to the same location: • Begin a spiral search from where the RP to PC traverse ended; extend up to a 500-foot radius around the ground location. • At the same time, use all photos, drawings/maps, previous data, and/or GPS coordinates to aid in relocating. • If the end of the RP to PC measured distance does not appear to be at the PC photo pinprick, then use photos to find the pinprick location visually on the ground. If the ground location of the pinprick is found then begin a spiral search of that area, extending up to a 500-foot radius. 5. If no sign of the plot can be found after an extensive search (maximim 2 hours) using all the data and tools available, the plot will be considered lost. Search time is limited to allow for plot re-establishment on the same field day. See Section 4.1, Lost Plot/Replacement Plot.

SUBSECTION 2.2.2 INCORRECTLY INSTALLED PLOT Incorrectly installed plots will be relocated or remeasured based on the following criteria: • Remeasurement (SAMPLE KIND = 2): Plot is remeasured in its current location, regardless of location errors (i.e., incorrect initial plot location). In this situation, pinprick the actual plot center location on the photos and label the new pinprick on the back of the photo (e.g., “actual plot location”); draw an “X” over the previous pinprick and label (e.g., “initial pinprick location–plot not installed here“). Electronic PLOT NOTES (Item 4.3.5.9) must be recorded, and a written explanation/description included on the plot card.

SUBSECTION 2.2.3 INCORRECTLY INSTALLED SUBPLOT OR MICROPLOT Subplots and microplots are remeasured where they were installed at the previous annual visit, regardless of installation error (see Subsection 3.2.3, New Plot Establishment Tolerances). When a subplot or microplot center is determined to be installed incorrectly, electronic SUBPLOT NOTES (Item 6.1.2.6) must be recorded documenting why the installation was in error and a written explanation included on the plot card.

SUBSECTION 2.2.4 PC STAKE OR SUBPLOT/MICROPLOT PIN MISSING OR MOVED

If the PC stake or a subplot/microplot pin is missing or has moved, re-establish the PC stake, subplot pin, or microplot pin at the previously established location using all available information (e.g., previous crew's data sheets, plot card diagrams and descriptions, downloaded tree data in PDR, and any monumentation on the ground). The location of the plot center stake and subplot pins is critical for ensuring that trees do not arbitrarily move in or out of tally between surveys. When a crew has exhausted all efforts to find the PC stake or subplot/microplot pin, use the following guidelines to re-establish plot/subplot/microplot center and provide details of the reinstallation in electronic SUBPLOT NOTES and on the plot card: 1. If the PC stake or a subplot pin is not in the previous location (i.e., pulled out of ground or moved) or is missing: • Locate the witness trees and any trees that are located nearest to the limiting distances of 24.0 feet. Use the slope distances and horizontal distances of these trees to ensure proper stake or Chapter 2: pin re-establishment. • To ensure optimal precision, the crew should measure out the previous slope/horizontal distances along the back-azimuths from the trees nearest the limiting distances to where PC or subplot center should be. The location where the measured distances converge should be the re- established stake/pin position. • If the measured distances do not intersect at one point after verifying the distances and back- LOCATING THE PLOT azimuths, re-establish the stake/pin at the average point, and record the discrepancies in the electronic SUBPLOT NOTES. For example: Tree A has a horizontal distance of 23.4 feet and a back-azimuth of 270 degrees. Tree B has a horizontal distance of 23.2 feet and a back-azimuth of 90 degrees. Although the measuring tapes extending from the two trees should meet at center, there is a gap of 0.4 feet between them. Re-establish center at the average point between the two tapes, and record the details of the reinstallation in electronic SUBPLOT NOTES. pg.22 2. If the microplot pin is not in the previous location (i.e., pulled out of ground or has moved), or is missing: • Locate any previously tallied saplings using the printout and downloaded data in the PDR. Locate saplings on the edge of the 6.8-foot limiting distance and use them to re-establish the center of the microplot. • If there is only one tally sapling on the microplot, measure out 12 feet at 90-degrees from subplot center to temporarily mark the location of microplot center. Measure back to this location from the pith of the sapling using previous distance and azimuth and re-establish the microplot pin based on the temporary pin location and previous tally sapling data. • If there are no tally saplings on the microplot, re-establish microplot center 12 feet from subplot center at 90-degrees.

SUBSECTION 2.2.5 LOST SUBPLOT When an individual subplot is lost (cannot be relocated), re-establish the subplot center pin. CONDITION CLASS STATUS (Item 5.7.0.4) of the new subplot must be updated (if necessary) and previous tree data must be reconciled. See Section 8.4, Tree Tracking, for specific instructions for closing out downloaded tree records on lost subplots.Record details of the lost subplot and procedures used to reinstall the pin in electronic SUBPLOT NOTES and on the plot card. Record specific notes pertaining to the tree tally in the individual TREE NOTES. In cases where individual subplots are lost (cannot be located), use the following procedures: • Assign the appropriate present CONDITION CLASS STATUS Code(s) to the new subplot (usually CONDITION CLASS STATUS = 1 or 2). • Assign TREE STATUS = 0 to all downloaded trees (i.e., incorrectly tallied at the previous survey). • Assign RECONCILE codes 3 or 4 (i.e., missed live or missed dead) to all trees on the new subplot.

SUBSECTION 2.2.6 LOST PLOT (REPLACEMENT PLOT) If a previously established annual inventory (4-subplot design) plot (SAMPLE KIND = 2) cannot be found following an extensive search (three hours) using all the data and tools available, the plot is considered lost; certain procedures must be followed to “close out” the old (lost) plot and replace it with a new plot. See Section 4.1, Lost Plot/Replacement Plot, for specific procedures.

SECTION 2.3 LOCATING NEW PLOTS Annual inventory plots installed for the first time where no periodic P2 plot previously existed should have new photos with the plot center marked—either pinpricked or marked with crosshairs. Some plots may also have coordinates obtained by digitizing USGS topographic maps. Some plots may contain photos and supplemental imagery, which can be used as an aid in locating plot center. When you arrive at the point you believe to be the PC, carefully check the location on the new photos/imagery against the surrounding terrain and pattern of tree crowns and vegetation to confirm the location on the photo/imagery and your location on the ground are the exact same spot. The new plot should be installed accurately: within +/- 10.0 feet of pinprick on a 1:12,000 or finer scale photo (e.g., 1:5,000), and within +/- 30.0 feet if the photo scale is 1:12,000 or broader (e.g., 1:15,840).

SUBSECTION 2.3.1 INSTALLING A PLOT WITH TARGET (TGT) COORDINATES Installing a plot with target (TGT) coordinates is the preferred method in the Pacific Islands. To establish a new plot with TGT Coordinates follow these steps: 1. Navigate to approximately 200 to 300 feet from the TGT Coordinates. 2. Choose an RP using the same selection criteria specified in Chapter 3 (Plot Layout and Referencing). 3. Create a waypoint at the RP. 4. Once the RP waypoint is created and saved after collecting at least 60 hits, one should use ROUTE LOCATING NEW PLOTS

: screen to determine the HD and AZ from RP to PC. 5. Measure to the plot with compass and tape and laser as you would usually from the RP. Section 2.3 pg.23 SECTION 2.4 CIRCUMSTANCES PRECLUDING PLOT ESTABLISHMENT/ MEASUREMENT

Active Logging: If the plot area is being actively logged (timber is being felled, bucked, or yarded) or is unsafe to visit because of active logging, do not establish/measure the plot. Note the status of the logging operation on the plot jacket and return the plot to the unit coordinator. Proceed to an alternate plot if available. Plot center (subplot 1) cannot be physically occupied (e.g., Census water, noncensus water, denied access, or hazardous): The subplot will not be installed/measured or referenced; the entire subplot is classified as the subplot center condition, even though a portion of it may be in another condition class. Other subplots are installed/measured using normal procedures (see Subsection 3.4.2, Establishing Subplots when Plot Center is Inaccessible). • Note: If a subplot center (including subplot 1) lands in Census or noncensus water do not install or measure the subplot, even if it can be occupied safely. Chapter 2: LOCATING THE PLOT pg.24 CIRCUMSTANCES PRECLUDING PLOT ESTABLISHMENT/MEASUREMENT : Section 2.4 pg.25 CHAPTER 3 PLOT LAYOUT AND REFERENCING This chapter describes the Forest Inventory and Analysis (FIA) plot design, establishment guidelines, tolerances and procedures used to monument and reference plots and subplots.

SECTION 3.1 PLOT DESIGN The Core ground plot consists of four subplots with a radius of 24.0 feet horizontal. The center subplot is subplot 1. Subplots 2, 3, and 4 are located 120.0 feet (horizontal) at azimuths of 360, 120, and 240 degrees, respectively, from the center of subplot 1 (see Figure 3.1: FIA Phase 2 plot diagram). Throughout this field manual, the use of the word ‘plot’ refers to the entire set of four subplots. ‘Plot center’ is defined as the center of subplot 1. Each subplot contains a microplot with a radius of 6.8 feet horizontal. The center of the microplot is offset 90 degrees and 12.0 feet horizontal from each subplot center. Microplots are numbered in the same way as subplots.

SUBSECTION 3.1.1 PLOT LAYOUT Chapter 3:

Figure 3.1: FIA Phase 2 plot diagram

The following table can assist in locating subplots 2 through 4 from a subplot other than subplot 1.

Subplot Numbers Azimuth Backsight Distance PLOT LAYOUT AND REFERENCING From To degrees feet 2 3 150 330 207.8 2 4 210 030 207.8 3 4 270 090 207.8

SUBSECTION 3.1.2 PLOT DIMENSIONS A. Subplot – for sampling landscape-level characteristics, assessing vegetation, tallying trees meeting a minimum diameter at breast height: • Radius = 24.0 feet • Area = 1,809.56 square feet or approximately 0.04 acre or approximately 1/24 acre B. Microplot – for counting tree seedlings and tallying tree saplings: • Radius = 6.8 feet • Area = 145.27 square feet or approximately 0.003 acre or approximately 1/300 acre pg.26 SECTION 3.2 PLOT ESTABLISHMENT

SUBSECTION 3.2.1 PLOT ESTABLISHMENT GUIDELINES Establish the ground plot at the location corresponding to the pinprick on the photo, as described in Section 3.1, Plot Design. In the annual inventory the four subplots are laid out in the pattern shown in Figure 3.1: FIA Phase 2 plot diagram. When the crew cannot occupy the plot center because safety hazards exist, or the plot center is inaccessible or out of the sample, the crew should check the other subplots. See Section 2.4 Circumstances Precluding Plot Establishment/Measurement, for installation instructions when a safety hazard exists. If any subplot centers can be occupied and are in the sample, the subplots that can be occupied should be established and sampled following normal procedures. When a subplot center or microplot center cannot be occupied, no measurements will be taken on that subplot or microplot; instead, the entire subplot or microplot should be classified according to the condition preventing occupancy. However, if a localized obstruction (e.g. tree stem, boulder) prevents subplot/microplot center occupancy, measure the subplot or microplot using best estimate distances for references and trees. Document the situation in Item 6.1.2.6, SUBPLOT NOTES (PNW). See Item 6.1.1.3, SUBPLOT STATUS (CORE 3.2) for examples of coding data items in specific situations. Note: If a subplot center (including subplot 1) is classified as noncensus water (CONDITION CLASS STATUS = 3) or Census water (CONDITION CLASS STATUS = 4), no measurements are taken on that subplot, even if it can be occupied safely (i.e., regardless of water level, a subplot center covered by noncensus or Census water cannot be “occupied”). If a remeasurement (SAMPLE KIND = 2) subplot or microplot was installed incorrectly at the previous visit, the current crew should remeasure the subplot or microplot in its present location (see Subsection 2.2.2, Incorrectly Installed Plot). Notes are required, both on the plot card and in SUBPLOT NOTES, when previously mislocated subplots are encountered. In cases where individual subplots are lost (cannot be relocated), see Subsection 2.2.5, Lost Subplot, for instructions.

SUBSECTION 3.2.2 PLOT INTEGRITY Each FIA unit is responsible for minimizing damage to current or prospective sample trees and for specifying how these trees are monumented for remeasurement. The following field procedures are permitted: • Nailing tags on witness trees so that subplot centers can be relocated. • Boring trees for age on subplots to determine tree age, site index, stand age, or for other reasons. • Nailing and tagging trees on microplots and subplots so that these trees can be identified and relocated efficiently and positively at times of remeasurement. • Nailing or painting microplot and subplot trees so that the point of diameter measurement can be accurately relocated and remeasured. All other potentially damaging procedures that may erode subplot integrity are prohibited. The following practices are specifically prohibited: • Boring and scribing some specific tree species that are known to be negatively affected (e.g., the initiation of infection or callusing). • Chopping vines from tally trees. When possible, vines should be pried off trunks to enable accurate measurement. If this is not possible, alternative tools (calipers, biltmore sticks) should be used. Note: Avoid becoming part of the problem! There is a risk that field crews walking into plot locations could pick up seeds along roadsides or other patches of invasive plants and spread them through the forest and on to the plot. Be aware of the vegetation you are traveling through and consider stopping and removing

PLOT ESTABLISHMENT seeds from boots and clothing before entering uninvaded lands, particularly remote areas that are rarely : visited. Section 3.2 pg.27 SUBSECTION 3.2.3 NEW PLOT ESTABLISHMENT TOLERANCES Plot center (center of subplot 1): +/- 10.0 feet of pinprick on a 1:12,000 or finer scale photo (e.g., 1:5,000); +/- 30.0 feet if the photo scale is 1:12,000 or broader (e.g., 1:15,840) Subplot 2, 3, or 4: +/- 5 feet Microplot: +/- 0.5 feet

SECTION 3.3 MONUMENTING AND REFERENCING PLOT CENTER All ground visited plots are monumented at plot center and referenced by a reference point (RP) and two witness trees/objects. Install a white plot pin at the plot center (PC, center of subplot 1); see Subsection 3.3.3, Exceptions to Monumenting Plot Center, for valid exceptions to this rule. If previously established, the plot was monumented at last visit with a pin in the ground at PC and was referenced by an RP and two nearby witnesses—marked distinctively with square or round tags. Replace the previous plot pin with a new white plot pin at exactly the same location as the old pin (pack out plastic pins and discard), and update witness measurements. Note: Monumenting and referencing protocol for entirely nonforest plots differs from standard protocol; see Section 3.5 (Monumenting and Referencing Entirely Nonforest Plots) for monumenting and referencing guidelines. Special Note for Hawaii Island Only: Do not affix the lower reference tags or nails to reference trees on lands owned by the Division of Forestry and Wildlife (DOFAW). This is a special case request. The upper tags should still be installed.

SUBSECTION 3.3.1 THE REFERENCE POINT The reference point references the plot center monument, a pin marking PC, on all field visited plots. It is an object (usually a tree) that is easily identified on the aerial photo and on the ground, and likely to be present at the next visit. Do not reference a subplot other than the one with the plot center monument just because that subplot is closer to the RP. The RP may reference a subplot other than subplot 1 only when there is a significant obstacle or other obstruction between the RP and subplot 1, or when a subplot other than subplot 1 has the center monumentation (see Subsection 3.3.3, Exceptions to Monumenting Plot Center). Select an RP: The RP should be distinctive both on the ground and on the aerial imagery. The previous RP tree may be reused, if it is still suitable. If the old RP tree is dead, missing, or difficult to identify on the ground or on the photo, select a new RP and leave the tags on the old RP. If possible, it should be a tree that is not likely to die or be cut before the next inventory, although a snag or other object may be selected as an RP (e.g., a distinctive fence post, building corner). If such an RP is utilized, describe it on the back of Chapter 3: the plot photo and under Plot Access Description on the plot card. Tag the RP: Attach three square aluminum tags to the RP tree; old tags may be reused, if suitable. Nail two tags six feet above ground line; facing the direction(s) from which you expect future crews to approach the RP. Nail one square tag below stump height on the side of the tree facing the plot center monument. Nails should be driven in only enough to anchor them firmly into the wood. If the RP is a building, rock, or other PLOT LAYOUT AND REFERENCING item that should not be tagged, include a description in the Plot Access Description on the plot card and in the RP NOTES (Item 4.3.6.7). In addition to monumenting the RP, the following must be completed: • RP data and written description (to the RP and to the plot) recorded on the plot card. See Appendix J, Plot Jacket, for specific guidelines. • RP pinpricked on the plot photo, and the pinprick labeled with RP data on the back of the photo, noting any irregularities. See the Plot Jacket appendix for specific guidelines. • RP data recorded in the data recorder, noting any irregularities in the RP NOTES. See Subsection 4.3.6, Reference Point Attributes, for specific guidelines and data items. Special Note for Hawaii only: Do not affix the lower square tag on lands owned by the Division of Forestry and Wildlife (DOFAW). Upper tags should still be affixed to the RP 6 feet or higher. Two tags should be affixed facing the direction of approach and one tag facing the direction to plot. Also, the RP tags in Hawaii face away from near-by roads or trails. pg.28 SUBSECTION 3.3.2 WITNESS TREES/OBJECTS All ground visited plots will have two witness trees/objects referencing plot center (see Subsection 3.3.3, Exceptions to Monumenting Plot Center, for exceptions to this rule). Witness the PC monument and subplot pins as follows: A. Selecting witnesses: Select two trees/objects near the subplot center which form, as closely as possible, a right angle with the center marker. Trees/objects within six feet of the subplot center are preferable. If live trees are not available, use similarly sturdy objects that have a low likelihood of moving or rapidly decaying. On previously established subplots, reuse the previous witnesses unless better trees/objects are available. B. Monumenting witnesses: Monumentation procedures vary depending on the subplot being witnessed; plot center (PC, center of subplot 1) has different monumentation than subplots 2 through 4 (Table 3.1: Hardware for subplot witness monumentation). When attaching a tag to a live witness tree, drive the nail into the tree only enough to anchor the nail firmly into the wood. On previously established subplots, renew old witness tags as needed. If a witness is replaced, remove old tags to avoid confusion at subsequent visits. Table 3.1:Hardware for subplot witness monumentation Subplot Hardware Plot Center (PC, Silver aluminum square tags. If the witnesses are also numbered tally trees, attach the Subplot 1) tree number tags with the same nails (i.e., numbered tag on top of square tag). Subplots 2 - 4 Two-color round aluminum tags with yellow side out.

Table 3.2:Standards for monumentation of various witness types Witness Type Standards Live tally tree greater Attach one tag below stump height facing subplot center, and attach tags six feet above than or equal to 3.0 ground height facing the direction of anticipated approach to the subplot. Note: avoid inches DBH using tally saplings unless no other trees are available. If saplings must be used, wire the tag to an ancillary branch. Dead tally tree Attach one tag below stump height facing subplot center, and attach tags six feet above ground height facing the direction of anticipated approach to the subplot. Pound nails flush with the bole of the snag. Non-tally tree Attach one tag below stump height facing subplot center, and attach tags six feet above ground height facing the direction of anticipated approach to the subplot. If the witness is a live tree greater than or equal to 3.0 inches DBH, attach an aluminum nail at the diameter measurement point. If saplings must be used, wire the tag to an ancillary branch facing subplot center. Stump (i.e., less than Attach a yellow round tag below stump height facing plot center. Attach another tag 4.5 feet tall) centered on the top/cut face of the stump. When nailing tags to stumps, pound nails flush to the bole. Tags nailed to stumps stay attached longer if bark is removed prior to nailing the tag. Shrub Nail or wire a yellow round tag to the base of the shrub facing subplot center. If possible, nail or wire additional rounds higher in the shrub facing the direction of expected approach to the subplot. Other objects Monument as appropriate for the object.

Note: Stump height is 0.5 feet above ground level. Note: PC always gets two tags six feet above ground level facing the direction of anticipated approach unless not possible; one or two tags should be placed up high on subplots 2-4 facing the direction of approach.

SUBSECTION 3.3.3 EXCEPTIONS TO MONUMENTING PLOT CENTER MONUMENTING AND REFERENCING PLOT CENTER

: The plot center monument is not placed at the center of subplot 1 (plot center) if either of the following situations occur: • The center of subplot 1 is too hazardous to visit (e.g., subplot center 1 is in the middle of a pond, the middle of a freeway, or on the side of a cliff) OR Section 3.3 pg.29 • Placing the plot center monument at the center of subplot 1 is likely to irritate a landowner (e.g., subplot 1 center is in the middle of someone's front lawn) THEN: Reference the center of the lowest-numbered subplot on which the above exceptions do not apply. Circle the pinprick on the back of the photo; write "RP to subplot X” (insert appropriate number) and required RP data near the circle. Record an electronic PLOT NOTE stating which subplot was monumented.

SECTION 3.4 MONUMENTING AND REFERENCING SUBPLOTS 2 THROUGH 4 Accessible subplots that have a forest land condition class present on the 24.0-foot fixed-radius subplot, and accessible subplots with a measurable nonforest condition class (NONFOREST CONDITION CLASS SAMPLING STATUS =1) present on the subplot, also require referencing (see Table 3.1: Hardware for subplot witness monumentation).

SUBSECTION 3.4.1 LOCATE AND MONUMENT SUBPLOT CENTER Subplots 2, 3 and 4 are located at 360, 120, 240 degrees respectively (see Subsection 3.1.1, Plot Layout). Mark subplot center: Place a metal pin at the ground location of subplot center. Tie a small piece of flagging to the pin. Reference witnesses: Reference the metal pin to two nearby witnesses (see Table 3.2: Standards for monumentation of various witness types). Special Note for Hawaii Only: Do not affix the lower reference tags or nails to reference trees on lands owned by the Division of Forestry and Wildlife (DOFAW). This is a special case request. The upper tags should still be installed 6 feet or higher.

SUBSECTION 3.4.2 ESTABLISHING SUBPLOTS WHEN PLOT CENTER IS INACCESSIBLE When plot center is inaccessible (e.g., hazardous due to cliffs, falls in census water), but one or more of the other subplot centers is accessible, establish all accessible subplots by using the offset procedures described below. In the following example, plot center (PC) is inaccessible, but subplots 2 and 3 are in accessible forest land. All of subplots 1 and 4 are classified as CONDITION CLASS STATUS = 5 (nonsampled). Subplot 2 and subplot 3 must be established since they are in accessible forest land (see Figure 3.2: Inaccessible plot center). Chapter 3: PLOT LAYOUT AND REFERENCING pg.30 Example: The course from RP to PC is 235 degrees for 230 feet. The cliff is encountered at 198 feet; 32 feet short of PC. To establish subplot 2, proceed 360 degrees for 120 feet, then proceed on the original azimuth (235 degrees) for the remaining 32 feet to the center of subplot 2. To establish subplot 3: start where the original course from RP to PC ended; go 120 degrees for 120 feet; then go 235 degrees for 32 feet to the center of subplot 3.

Figure 3.2: Inaccessible plot center

SUBSECTION 3.4.3 LOCATE AND MONUMENT THE MICROPLOT The center of each 6.8-foot fixed-radius microplot is located 12 feet horizontal from each subplot center at 90 degrees (see Subsection 3.1.1, Plot Layout). Place a metal pin at microplot center.Tie a small piece of flagging to the pin.

SECTION 3.5 MONUMENTING AND REFERENCING ENTIRELY NONFOREST PLOTS

SUBSECTION 3.5.1 NONFOREST PLOTS WITH MEASUREABLE NONFOREST Plots with measurable nonforest that are entirely nonforest and are ground visited must be referenced on all four subplots. Follow the steps in Section 3.3 (Monumenting and Referencing Plot Center) and Section 3.4 (Monumenting and Referencing Subplots 2 through 4).

SUBSECTION 3.5.2 NONFOREST PLOTS WITHOUT MEASURABLE NONFOREST Plots that are entirely nonforest and are ground visited must be referenced at plot center. Follow the steps in Section 3.3 (Monumenting and Referencing Plot Center) to reference the plot center. Subplots 2 through MONUMENTING AND REFERENCING ENTIRELY NONFOREST PLOTS

: 4 do not need to be referenced if the entire plot is nonforest. Section 3.5 pg.31 CHAPTER 4 PLOT LEVEL DATA Plot attributes record information about the plot location, the field crew visit, and landowner contact/ requests. This information aids future crews in plot relocation, sets up date and inventory cycle information in the data recorder, and makes it possible to analyze the relationship of plot data to other mapped data (e.g., rivers). All data items listed in this chapter are collected on plots with at least one accessible forest land condition (PLOT STATUS = 1) and all nonforest/nonsampled plots (PLOT STATUS = 2 or PLOT STATUS = 3). In general, plot level data apply to the entire plot and are recorded from the center of subplot 1. A plot is considered nonforest if no part of it is currently located in forest land (CONDITION CLASS STATUS = 1). A plot is nonsampled if the entire plot is not sampled for one of the reasons listed in PLOT NONSAMPLED REASON. If a forest plot has been converted to nonforest or becomes a nonsampled plot, the previous data are reconciled and an attempt is made to visit the plot during the next inventory. If a nonforest plot becomes forest or access is gained to a previously nonsampled plot, a new forest ground plot is installed. All nonforest and nonsampled plots are visited if there is any reasonable chance that they might include some forest land condition class. Trees on previously forest land plots will be reconciled during data processing. There is a distinction between plots that have been clearcut, and plots that have been converted to another land use. A clearcut plot is considered forest land until it is actively converted to another land use.

SECTION 4.1 LOST PLOT/REPLACEMENT PLOT Plots that cannot be relocated by using the guidelines in Section 2.2, Established Plot Issues, are considered lost; certain procedures must be followed to “close out” the old (lost) plot and replace it with a new plot. • Remeasurement plots (SAMPLE KIND = 2) - see Subsection 4.1.2, Replacement Plot for specific procedures.

SUBSECTION 4.1.1 LOST ANNUAL PLOT If a previously established annual inventory (four-subplot design) plot (SAMPLE KIND = 2) cannot be found, the plot is considered lost and the state coordinator must be notified. 1. Close out the lost annual plot: • If trees were recorded: Use coding procedures for lost plots listed under Item 4.3.4.2. • If trees were recorded and there is no evidence of disturbance: Document factors you believe contributed to the plot being lost on the plot card and in the electronic PLOT NOTES (Item 4.3.5.9). • If trees were recorded and there is evidence of disturbance: efforts to locate plot must be documented and the state coordinator notified. Document factors you believe contributed to the plot being lost on the plot card and in the electronic PLOT NOTES. An explicit description of the percentage of mortality and cause of death of trees must be recorded; the plot will be reviewed by analysts at the end of the season.

2. Install a replacement plot (see Subsection 4.1.2, Replacement Plot). Chapter 4:

SUBSECTION 4.1.2 REPLACEMENT PLOT Once a lost annual plot is closed out (see Subsection 4.1.1, Lost Annual Plot), a replacement plot must be installed at the ground location marked by the original PI photo pinprick or the digitized coordinates of that

pinprick if there are no photos. Create a new plot file for the replacement plot (SAMPLE KIND = 3); a new PLOT LEVEL DATA (or surrogate) PLOT NUMBER will be assigned (see Item 4.2.1.4). Locating and laying out a replacement plot should be performed as if installing the plot for the first time. Notify the data manager before sending any replacement plots to the office.

SECTION 4.2 PLOT LEVEL DATA DOWNLOADED TO THE PDR Do not change the downloaded code for the following data items. If instructed, verify the code is correct and if it isn't, contact the PDR programmer. pg.32 SUBSECTION 4.2.1 PLOT LEVEL DATA ITEMS

Item 4.2.1.1 STATE or COUNTRY (CORE 1.1) [PLOT.STATECD] The unique Federal Information Processing Standard (FIPS) code identifying the STATE or country where the plot center is located. When collected: All plots Field width: 2 digits Tolerance: No errors Values: Code State or Country 15 Hawaii 60 American Samoa 64 Federated States of Micronesia 66 Guam 68 Marshall Islands 69 Commonwealth of the Northern Mariana Islands 70 Palau

Item 4.2.1.2 ISLAND (PACI) [PLOT.PAC_ISLAND_PNWRS] Downloaded name identifying the island the plot is located on. This should also be printed on the plot jacket. When collected: All plots Field width: 20 Characters Tolerance: No errors Values: Appendix A.2

Item 4.2.1.3 COUNTY (CORE 1.2) [PLOT.COUNTYCD] The unique FIPS code identifying the county where the plot center is located. When collected: All plots Field width: 3 digits Tolerance: No errors Values: Appendix A

Item 4.2.1.4 PLOT NUMBER (CORE 1.3) [PLOT.PLOT] The identification number, assigned to each plot, unique within a county or provincial unit Note: If a replacement plot file needs to be created (see Subsection 4.1.2, Replacement Plot), the new plot number assigned by MIDAS (or 99999 as a surrogate) will be entered when opening the new plot file. Do not change the downloaded code within plot attributes. When collected: All plots Field width: 5 digits Tolerance: No errors Values: 00001 to 99999

Item 4.2.1.5 CYCLE (PNW) [PLOT.CYCLE] PLOT LEVEL DATA DOWNLOADED TO THE PDR

: This code identifies the cycle number of the current plot. When collected: All Plots Field width: 2 digits Tolerance: No errors Section 4.2 pg.33 Values: 01-99

Item 4.2.1.6 SUBCYCLE (PNW) [PLOT.SUBCYCLE] This code identifies the subcycle of the plot. When collected: All Plots Field width: 2 digits Tolerance: No errors Values: 01-10

Item 4.2.1.7 FIELD GUIDE VERSION (CORE 1.12) [PLOT.MANUAL] This code identifies the version number of the Forest Inventory and Analysis National Core Field Guide that was used to collect the annual inventory data on this plot. This will be used to match collected data to the proper version of the field guide. Plots are measured using the field guide version that correlates to the year it is actually measured, which may not be the year it was originally scheduled to be visited (i.e., carry over plots are measured with the current year’s field guide). When collected: All plots Field width: 3 digits (x.y) Tolerance: No errors Values: 7.0

Item 4.2.1.8 PDR STARTING DATA RECORDER VERSION NUMBER (PNW) [PLOT.PDR_START_VERSION] A 30-digit field identifying the version number of the data recorder program used at the current visit to collect data on the plot on the day the plot was started, in the format a.b.c.d.REGION.e. The a signifies the national field guide version, and b signifies the minor national field guide version. The c represents the main national MIDAS build version, and the d represents the main national MIDAS revision number. The REGION code will be PNW for our region. The e represents the regional version number of MIDAS. As an example 6.0.1.3.PNW.5 represents version 6.0 of the national manual, and it is the first major build of MIDAS, and the 3rd national revision. It also signifies the 5th update of the MIDAS application for PNW. The regional version number will be recycled back to “0” when the main national field guide version is updated, for example, when Core Field Guide 8.0 is implemented. When collected: Generated for all plots Field width: 30 digits Tolerance: No errors Values: a.b.c.d.REGION.e (starting at 7.0.2.3.PNW.1)

Item 4.2.1.9 PDR ENDING DATA RECORDER VERSION NUMBER (PNW) [PLOT.PDR_END_VERSION] A 30-digit field identifying the version number of the data recorder program used at the current visit to collect data on the plot on the day the plot was completed. See Item 4.2.1.8, PDR STARTING DATA Chapter 4: RECORDER VERSION NUMBER, for a description of the naming convention of values for this data item. When collected: Generated for all plots Field width: 30 digits Tolerance: No errors

Values: a.b.c.d.REGION.e (starting at 7.0.2.3.PNW.1) PLOT LEVEL DATA

Item 4.2.1.10 DECLINATION (CORE OPTIONAL 1.14) [PLOT.DECLINATION] The azimuth correction used to adjust magnetic North to true North. All azimuths are assumed to be magnetic azimuths unless otherwise designated. This field carries a decimal place because the USGS corrections are provided to the nearest half degree. DECLINATION is defined as: DECLINATION = (TRUE NORTH - MAGNETIC NORTH) pg.34 For Pacific Island plots, azimuths are always in relation to true North. The declination adjustment used for each plot will be downloaded/printed, and is listed by Island in Appendix A. This adjustment is made in the field by setting the declination for the plot to “East declination” on the compass. Do not change the downloaded/printed code. When collected: Downloaded for all plots Field width: 5 digits including sign (+xxx.y) Tolerance: No errors Values: Downloaded values

Item 4.2.1.11 CHANGE MATRIX REQUIRED (PNW) [PLOT.CHANGE_MATRIX_REQUIRED_PNWRS] A downloaded code, indicating if remeasurement protocol (Section 5.6) should be followed. This code cannot be changed in the field. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Description N Change matrix not required Y Change matrix required

Item 4.2.1.12 P2 VEGETATION SAMPLING STATUS (CORE OPTIONAL 8.3.1) [PLOT.P2VEG_SAMPLING_STATUS_CD] This downloaded plot-level variable determines whether P2 Vegetation data will be recorded on the plot and the land condition class(es) on which it will be recorded If P2 VEGETATION SAMPLING STATUS = 0, no further data collection is required. Default value for Hawaii is 1, 2 for all other Island groups. When collected: All plots Field width: 1 digit Tolerances: At least 99 percent of the time Values: Code Definition 0 Not sampling P2 Vegetation 1 P2 Vegetation data collected only on accessible forest land conditions (CONDITION CLASS STATUS = 1 and NONFOREST SAMPLING STATUS = 0) 2 P2 Vegetation data collected on all accessible land conditions (CONDITION CLASS STATUS = 1 or 2, NONFOREST CONDITION CLASS SAMPLING STATUS = 1)

Item 4.2.1.13 LEVEL OF DETAIL (CORE OPTIONAL 8.3.2) [PLOT.P2VEG_SAMPLING_LEVEL_DETAIL_CD] This downloaded plot-level variable determines whether data are collected for vegetation structure only or for Species Composition as well. If LEVEL OF DETAIL = 3, then a tree species could be recorded twice, but it would have two different species growth habits (see Item 10.4.0.8, SPECIES GROWTH HABIT (CORE OPTIONAL 8.6.1)).The Pacific Islands inventory will be downloaded with LEVEL OF DETAIL = 2. When collected: On all plots where P2 vegetation is being sampled (P2 VEGETATION SAMPLING STATUS = 1 or 2) Field width: 1 digit Tolerances: At least 99 percent of the time PLOT LEVEL DATA DOWNLOADED TO THE PDR : Section 4.2 pg.35 Values: Code Definition 1 Collect data for vegetation structure only; total aerial canopy cover and canopy cover by layer for tally tree species (all sizes), non-tally tree species (all sizes), shrubs/woody vines, forbs, and graminoids. 2 Collect vegetation structure data (Level of Detail = 1) plus understory species composition data including up to four most abundant species per SPECIES GROWTH HABIT per subplot of: seedlings and saplings of any tree species (tally or non-tally) < 5 inches DBH, non-tally tree species ≥ 5 inches DBH, shrubs/woody vines, forbs, and graminoids. 3 Collect vegetation structure data, understory species composition data (Level of Detail = 2), plus up to four most abundant tree species (tally or non-tally) ≥ 5 inches DBH per SPECIES GROWTH HABIT per subplot.

Item 4.2.1.14 INVASIVE PLANT SAMPLING STATUS (CORE OPTIONAL 9.3) [PLOT.INVASIVE_SAMPLING_STATUS_CD] This downloaded plot-level variable determines whether invasive plant data will be recorded on the plot and the land class(es) on which it will be recorded. For most of the Pacific Islands (with the exception of non- experimental Forest Land in Hawaii) this data item will be downloaded as INVASIVE PLANT SAMPLING STATUS = 2. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Description 0 Not collecting invasive plant data 1 Invasive plant data collected only on accessible forest land conditions (CONDITION CLASS STATUS = 1 and NONFOREST SAMPLING STATUS = 0) 2 Invasive plant data collected on all accessible land conditions (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1)

Item 4.2.1.15 INVASIVE PLANT SPECIMEN COLLECTION RULE (CORE OPTIONAL 9.12) [PLOT.INVASIVE_SPECIMEN_RULE_CD] Downloaded code to indicate if collection of specimens of unknown (or suspected) invasive species is required. The Pacific Islands inventory will be downloaded with INVASIVE PLANT SPECIMEN COLLECTION RULE = 0. When collected: Downloaded on all plots where INVASIVE PLANT DATA SAMPLING STATUS = 1 or 2 Field width: 1 digit Tolerance: No errors Values: Value Description 0 FIA unit does not require specimen collection for invasive plants

1 FIA unit requires specimen collection for invasive plants Chapter 4:

Item 4.2.1.16 DWM SAMPLING STATUS (BASE) [PLOT.P2DWM_SAMPLING_STATUS_CD] This downloaded code describes whether DWM data will be recorded and which variables will be recorded. If code = 0, no further data collection is required within this manual section. In the Pacific Islands, DWM SAMPLING STATUS will be 0. PLOT LEVEL DATA When collected: All plots Field width: 1 digit Tolerance: No errors Value Description pg.36 Values: 0 Not sampling DWM 1 BASE biomass DWM variables collected on measured land conditions (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS STATUS = 2). 2 BASE biomass and wildlife/ecological package DWM variables collected on measured land conditions (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS STATUS = 2). Required for P3 DWM 3 Rapid assessment DWM variables collected on measured land conditions (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS STATUS = 2).

Item 4.2.1.17 SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED (PNW) [PLOT.GPS_SAMPLING_STATUS_CD_PNWRS] Downloaded code identifying whether or not a Survey Grade GPS rover file should be collected on each subplot. Survey Grade GPS rover files will be collected on all field visited plots. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Definition 0 No, Survey Grade GPS Coordinates will not be collected on subplots 1 Yes, Survey Grade GPS Coordinates will be collected on subplots

Item 4.2.1.18 YEAR OF PREVIOUS INVENTORY (PNW) [PLOT.PREV_INV_YEAR_PNWRS] This code is downloaded if the plot was visited previously. It indicates the year of the previous annual inventory. Do not change the downloaded date. When collected: Downloaded if plot was visited previously Field width: 4 digits Tolerance: No errors Values: Year

Item 4.2.1.19 MONTH OF PREVIOUS INVENTORY (PNW) [PLOT.PREV_INV_MONTH_PNWRS] This code is downloaded if the plot was visited previously. It indicates the month of the previous annual inventory. Do not change the downloaded date. When collected: Downloaded if plot was visited previously Field width: 2 digits Tolerance: No errors Values: Month (1 to 12) PLOT LEVEL DATA DOWNLOADED TO THE PDR : Section 4.2 pg.37 SECTION 4.3 PLOT LEVEL DATA COLLECTED IN THE FIELD

SUBSECTION 4.3.1 CREW VISIT INFORMATION

Item 4.3.1.1 SAMPLE METHOD CODE (PNW) [PLOT.DATA_SOURCE_PNWRS] Record the code that describes the source for the data collected on the plot location. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Sample Core codes (office use Code Method Description only) 1 Ground All data collected from a ground visit by a field 1 crew. 2 Viewed from a Location was flown over or viewed from a 1 distance distance (e.g., viewed from a road or adjacent ridgeline). 3 Photo Information for the location was determined 2 Interpretation using photo interpretation. 4 Other–specify Specify source of data in PLOT NOTES and on 2 the plot card.

Item 4.3.1.2 QA STATUS (CORE 1.17) [PLOT.QA_STATUS] Electronic data files are automatically named by the data recorder using the PLOT NUMBER and File Name Code. Electronic data files for plots with QA STATUS 2 through 6 are saved as separate files so that the original standard production plot data is preserved and can be used for quality control and statistical analysis. Record the code to indicate the type of plot data collected, using the following codes. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Standard production plot 2 Cold check 3 Reference plot (off grid) 4 Training/practice plot (off grid) 5 Botched plot file (disregard during data processing) 6 Blind check 7 Hot check (production plot) Chapter 4: Item 4.3.1.3 CREW NUMBER (CORE 1.18) [PLOT.CREWNBR1, CREWNBR2, CREWNBR3, CREWNBR4, CREWNBR5] Record up to five crew numbers as assigned to field crew; always record the crew leader first. The first 2 digits are for the responsible unit’s station number (NRS – 24XXXX, SRS – 33XXXX, RMRS – 22XXXX, and PNW – 26XXXX). PLOT LEVEL DATA When collected: All plots Field Width: 6 digits Tolerance: No errors Values: Code Definition PNW 260001 - 269999 pg.38 SUBSECTION 4.3.2 CURRENT DATE OF INVENTORY

Item 4.3.2.1 YEAR (CORE 1.13.1) [PLOT.MEASYEAR] Record the year in which the plot was completed. When collected: All plots Field width: 4 digits Tolerance: No errors Values: > 2016

Item 4.3.2.2 MONTH (CORE 1.13.2) [PLOT.MEASMON] Record the month in which the plot was completed. When collected: All plots Field width: 2 digits Tolerance: No errors Values: Month Code Month Code Month Code January 1 May 5 September 9 February 2 June 6 October 10 March 3 July 7 November 11 April 4 August 8 December 12

Item 4.3.2.3 DAY (CORE 1.13.3) [PLOT.MEASDAY] Record the day of the month on which the plot was completed. When collected: All plots Field width: 2 digits Tolerance: No errors Values: 1 to 31

SUBSECTION 4.3.3 TIME SPENT ON PLOT Basic information about time spent collecting plot data is needed. The time it takes to measure plots will help determine possible cost and time savings of changes or deletions to data collected, or cost and time expenditures of proposed new items. The following data items are recorded when a plot is field visited (SAMPLE METHOD CODE = 1).

Item 4.3.3.1 TRAVEL TIME TO PLOT (PNW) [PLOT.TIME_TO_PLOT_PNWRS] Record the number of hours it took for the crew to reach and find the plot. Include time spent driving, flying, getting keys from landowners, changing flat tires, hiking, searching for the plot location, etc. If multiple days were required to reach the plot, include travel time from all days. If additional plots are measured from a single campsite, use travel time from the campsite for the additional plots. If time differs among crew members, use the crew leader’s travel time. If the plot was visited on subsequent days, only use travel time to reach the plot on the initial visit. Estimate travel time to the nearest half hour. When collected: When SAMPLE METHOD CODE = 1 Field width: 3 digits (xx.y) Tolerance: 1 hour Values: 00.0 to 99.5 PLOT LEVEL DATA COLLECTED IN THE FIELD : Section 4.3 pg.39 Item 4.3.3.2 MEASUREMENT TIME ON PLOT (PNW) [PLOT.TIME_ON_PLOT_PNWRS] Record the number of person-hours it took to measure all items on the plot (number of people on plot X number of hours on plot). If multiple days were required, add times for a total. Include all time on plot including breaks (if any), equipment repair, etc., as well as actual measurement time. Estimate measurement time on plot to the nearest half hour. When collected: When SAMPLE METHOD CODE = 1 Field width: 3 digits (xx.y) Tolerance: 1 hour Values: 00.0 to 99.5

Item 4.3.3.3 TRAVEL TIME FROM PLOT (PNW) [PLOT.TIME_FROM_PLOT_PNWRS] Record the number of hours you think it will take to travel back from the plot. Do not include time for anticipated stops or delays. Typically this will be from the plot to the lodging where you are staying. If multiple days are required to return, use total travel time anticipated. If additional plots have been measured from a single campsite, use only travel time to the campsite for the additional plots. Estimate travel time to the nearest half hour. When collected: When SAMPLE METHOD CODE = 1 Field width: 3 digits (xx.y) Tolerance: 1 hour Values: 00.0 to 99.5

SUBSECTION 4.3.4 PLOT LEVEL FUNDAMENTALS

Item 4.3.4.1 PLOT STATUS (CORE 1.4) [PLOT.PLOT_STATUS_CD] Record the code describing the sampling status of the plot. In cases where a plot is inaccessible, but obviously contains no forest land, record PLOT STATUS = 2. In cases where a plot is access-denied or hazardous land use, and has the possibility of forest, record PLOT STATUS = 3. All skipped plots that will be carried over to the following year will be coded as PLOT STATUS = 3, regardless of whether or not a forested condition exists or potentially exists. Skipped plots that are certain to not have a forested condition, have a measurable nonforest condition (NONFOREST SAMPLING STATUS = 1), and have been on the list of field plots for three years should be coded as PLOT STATUS = 2. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Description 1 Sampled – at least one accessible forest land condition present on plot 2 Sampled – no accessible forest land condition present on plot Chapter 4: 3 Nonsampled – possibility of forest land

Item 4.3.4.2 PLOT NONSAMPLED REASON (CORE 1.7) [PLOT.PLOT_NONSAMPLE_REASN_CD] For entire plots that cannot be sampled, record one of the following reasons. PLOT LEVEL DATA When collected: When PLOT STATUS = 3 Field width: 2 digits Tolerance: No errors Values: Code Description 02 Denied access – Access to the entire plot is denied by the legal owner, or by the owner of the only reasonable route to the plot. Because a denied-access plot can become accessible in the future, it remains in the sample and is re- examined at the next occasion to determine if access is available. pg.40 03 Hazardous – Entire plot cannot be accessed because of a hazard or danger, for example cliffs, quarries, strip mines, illegal substance plantations, high water, etc. Although most hazards will not change over time, a hazardous plot remains in the sample and is re-examined at the next occasion to determine if the hazard is still present. 06 Lost plot – Entire plot cannot be found.Whenever this code is assigned, a replacement plot is required. The plot that is lost is assigned SAMPLE KIND = 2 and NONSAMPLED REASON = 6. The replacement plot is assigned SAMPLE KIND = 3. 08 Skipped visit – Entire plot skipped. Used for plots that are not completed prior to the time a panel is finished and submitted for processing. 10 Other – Entire plot not sampled due to a reason other than one of the specific reasons already listed. An electronic PLOT NOTE is required to describe the situation.

Item 4.3.4.3 NONFOREST SAMPLING STATUS (CORE 1.5) [PLOT.NF_SAMPLING_STATUS_CD] A downloaded code that indicates whether this plot is part of a nonforest inventory. When a portion of the plot is within Experimental Forest boundaries in Hawaii NONFOREST SAMPLING STATUS = 1. For all other Pacific Islands, NONFOREST SAMPLING STATUS will be populated as 1, but should be changed to 0 if a non-measureable nonforest condition is found on the plot and the plot contains no measureable nonforest condition. If the plot contains both measureable and non-measureable nonforest conditions, then NONFOREST SAMPLING STATUS = 1 and the appropriate NONFOREST CONDITION CLASS SAMPLING STATUS should be entered for each condition. For all Pacific Islands except Hawaii, measureable nonforest is defined as accessible NONFOREST LAND that has a NONFOREST LAND USE of 18-26, 40-45, and vascular vegetation cover greater than or equal to 10%. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Description 0 Nonforest plots / conditions are not inventoried 1 Nonforest plots / conditions are inventoried

Item 4.3.4.4 NONFOREST PLOT STATUS (CORE 1.6) [PLOT.NF_PLOT_STATUS_CD] Record the code that describes the plot status of the nonforest plot, i.e., PLOT STATUS = 2. In cases where the plot is inaccessible, but obviously contains no nonforest land (i.e., plot is either noncensus water or census water) record NONFOREST PLOT STATUS = 2. When collected: When PLOT STATUS = 2 and NONFOREST SAMPLING STATUS = 1 Field width: 1 digit Tolerance: No errors Values: Code Description 1 Sampled - at least one accessible nonforest land condition present on the plot 2 Sampled - no nonforest land condition present on plot, i.e., plot is either census and/or noncensus water 3 Nonsampled nonforest PLOT LEVEL DATA COLLECTED IN THE FIELD : Section 4.3 pg.41 Item 4.3.4.5 NONFOREST PLOT NONSAMPLED REASON (CORE 1.8) [PLOT.NF_PLOT_NONSAMPLE_REASON_CD] For entire nonforest plots that cannot be sampled, record one of the following reasons. When collected: When NONFOREST PLOT STATUS = 3 Field width: 2 digits Tolerance: No errors Values: Code Description 02 Denied access - Access to the entire plot is denied by the legal owner, or by the owner of the only reasonable route to the plot. Because a denied- access plot can become accessible in the future, it remains in the sample and is re-examined at the next occasion to determine if access is available. 03 Hazardous - Entire plot cannot be accessed because of a hazard or danger, for example cliffs, quarries, strip mines, illegal substance plantations, high water, etc. Although most hazards will not change over time, a hazardous plot remains in the sample and is re-examined at the next occasion to determine if the hazard is still present. 08 Skipped visit - Entire plot skipped. Used for plots that are not completed prior to the time a panel is finished and submitted for processing. 10 Other - Entire plot not sampled due to a reason other than one of the specific reasons already listed. An electronic PLOT NOTE is required to describe the situation.

Item 4.3.4.6 SUBPLOTS EXAMINED (CORE 1.9) [PLOT.SUBP_EXAMINE_CD] Record the number of subplots examined. By default, PLOT STATUS = 1 plots have all 4 subplots examined. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Only subplot 1 center condition examined and all other subplots assumed (inferred) to be the same (remote sensing use only) 4 All four subplots fully described (no assumptions/inferences) (for field visited plots and plots viewed from a distance) Chapter 4: PLOT LEVEL DATA pg.42 Item 4.3.4.7 SAMPLE KIND (CORE 1.10) [PLOT.KINDCD] This is a downloaded code that describes the kind of plot being installed. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Initial 4-subplot plot establishment - the initial establishment and sampling of a national design plot (FIA Field Guide versions 1.1 and higher). SAMPLE KIND 1 is assigned under the following circumstances: ▪ Initial activation of a panel or subpanel ▪ Reactivation of a panel or subpanel that was previously dropped ▪ Resampling of established plots that were not sampled at the previous visit.

2 Remeasurement – remeasurement of a national design plot that was sampled at the previous inventory. 3 Replacement plot – a replacement plot for a previously established annual inventory plot. All attempts to locate the plot have failed. Crew collects all data as if this were a new plot.Assign SAMPLE KIND = 3 if a plot is re- installed at a location other than the original location (i.e., plots that have been lost, moved, or otherwise replaced). Note that replacement plots require a separate plot file for the replaced plot. Replaced (lost) plots are assigned PLOT STATUS = 3, PLOT NONSAMPLED REASON CODE = 6, and SAMPLE KIND = 2. Lost plots retain the original plot number. For the replacement (new) plot, open a new file in the PDR with a plot number generated by MIDAS (or 99999 until the replacement plot number can be generated); assign PLOT STATUS = 1 or 2, SAMPLE KIND = 3, and tie it to the replaced plot by entering the PREVIOUS PLOT NUMBER. Sample Kind Assignment Matrix Time X Time X+1 PLOT STATUS 1 or 2 1, 2 or 3 SAMPLE KIND 12 PLOT STATUS 3 1, 2 or 3 SAMPLE KIND 11 PLOT STATUS 3 1, 2 or 3 SAMPLE KIND 21 * Time X and Time X+1 refer to any two sequential, scheduled (on-panel) inventories. Initial Plot Establishment: For the purpose of assigning SAMPLE KIND, initial plot establishment is defined as the first scheduled on-panel sample, not the more literal interpretation of the first time a plot is installed on the ground. For example, a privately owned plot determined to be nonforest during the pre-field review at the first scheduled on-panel sample is coded SAMPLE KIND = 1. At the next on-panel sample, the plot is installed on the ground for the first time and is coded SAMPLE KIND = 2.

Item 4.3.4.8 PREVIOUS PLOT MAPPING OR CONDITION ERROR (PNW) [PLOT.PREV_COND_MAP_ERROR_PNWRS] Record a code to indicate whether or not a correctable previous mapping error exists on the plot (any of the four subplots), or if there are errors in any of the previous correctable condition class data items (PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER PLOT LEVEL DATA COLLECTED IN THE FIELD

: GROUP). PREVIOUS PLOT MAPPING OR CONDITION ERROR = Y if any previous errors exist.. When collected: When CHANGE MATRIX REQUIRED = Y Field width: 1 digit Tolerance: No errors Section 4.3 pg.43 Values: Code Description N No error in previous correctable plot mapping or condition class data items Y Error in previous correctable plot mapping or condition class data items

Item 4.3.4.9 PREVIOUS PLOT NUMBER (CORE 1.11) [PLOT.REPLACED_PLOT_NBR] Record the identification number for the plot that is being replaced. When collected: When SAMPLE KIND = 3 Field width: 5 digits Tolerance: No errors Values: 00001 to 99999

SUBSECTION 4.3.5 ADDITIONAL ITEMS

Item 4.3.5.1 LANDOWNER PLOT SUMMARY REQUEST (PNW) [PLOT.LAND_OWN_REQ_CD_PNWRS] Record a 1-digit code which indicates if a landowner of the plot area requests a summary of the data collected on their land. Make any special comments relevant to the data request (e.g., landowner does not own all four subplots, the owner of subplot 2 would like data, etc.) in the electronic PLOT NOTES and use code 2. When collected: All plots Field width: 1 digit Tolerance: No errors Values: Code Description 0 No data request 1 Standard plot summary request 2 Special case data request

Item 4.3.5.2 TOPOGRAPHIC POSITION (PNW) [PLOT.TOPO_POSITION_PNW] Record or update the 1-digit code for the TOPOGRAPHIC POSITION that best describes the plot area. Use the common shape of slope listed in the table below as a guide. Record the code that best fits the TOPOGRAPHIC POSITION (Figure 4.1). On remeasurement plots (SAMPLE KIND = 2), this code should only be updated if there is a physical change or an obvious error by the previous crew. A related PLOT NOTE is required whenever this value is changed. If the plot straddles a canyon bottom or is on a narrow ridge top, but most of the area lies on one side hill, record the topographic position of the side hill. When collected: All plots with either at least one accessible forest land condition class (PLOT STATUS = 1) or one accessible nonforest land condition class when nonforest is being sampled (PLOT STATUS = 2 and NONFOREST SAMPLING STATUS = 1 and

NONFOREST PLOT STATUS = 1) Chapter 4: Field width: 1 digit Tolerance: One class for codes 3, 4, and 5. No errors for other codes. Values: Code Topographic Position Common shape of slope 1 Ridge top or mountain peak over 130 feet Flat 2 Narrow ridge top or peak less than 130 feet wide Convex 3 Side hill – upper 1/3 Convex PLOT LEVEL DATA 4 Side hill – middle 1/3 No rounding 5 Side hill – lower 1/3 Concave 6 Canyon bottom less than 660 feet wide Concave 7 Bench, terrace or dry flat Flat 8 Broad alluvial flat over 660 feet wide Flat 9 Swamp or wet flat Flat pg.44

Figure 4.1: Illustration of TOPOGRAPHIC POSITION codes

Item 4.3.5.3 HORIZONTAL DISTANCE TO IMPROVED ROAD (CORE 1.15) [PLOT.RDDISTCD] Record the straight-line distance from plot center (subplot 1) to the nearest improved road. An improved road is a road of any width that is maintained as evidenced by pavement, gravel, grading, ditching, and/or other improvements. When collected: All plots with either at least one accessible forest land condition class (PLOT STATUS = 1) or one accessible nonforest land condition class when nonforest is field-measured (PLOT STATUS = 2 and NONFOREST SAMPLING STATUS = 1 and NONFOREST PLOT STATUS = 1) Field width: 1 digit Tolerance: No errors Values: Code Definition 1 100 feet or less 2 101 to 300 feet 3 301 to 500 feet 4 501 to 1000 feet 5 1001 feet to 1/2 mile 6 1/2 to 1 mile 7 1 to 3 miles 8 3 to 5 miles 9 Greater than 5 miles

Item 4.3.5.4 ROAD ACCESS (PACI) [PLOT.RDUSECD] Record the first road access restrictions encountered while traveling to the plot. These restrictions limit car and truck access to the starting point for the walk to the plot, and may occur on ownerships encountered before reaching the plot area. When collected: All plots with either one accessible forest land condition class (PLOT STATUS = 1) or one accessible nonforest land condition class when nonforest is being sampled (PLOT STATUS = 2 and NONFOREST SAMPLING STATUS = 1 and NONFOREST PLOT STATUS =1 Field width: 1 digit Tolerance: No errors PLOT LEVEL DATA COLLECTED IN THE FIELD : Section 4.3 pg.45 Values: Code Definition 0 None – no road access restrictions 1 Road blocked by locked gate or cable across road 2 Road blocked by a human-made obstruction across road (ditch, mound, etc.) 3 Road blocked by natural occurrences (trees blown over onto road, road or bridge washed out) 4 Posted no motorized vehicle signs; road present, but restricted area such as Wilderness or National Park where vehicles are not allowed 9 Other – specify in PLOT NOTES

Item 4.3.5.5 RECREATION USE 1 (PACI) [PLOT.REUSECD1] Record up to 3 signs of recreation use encountered within the accessible forest land portion (and accessible nonforest land portion(s) when nonforest is being sampled) of any of the four subplots, based on evidence such as campfire rings, compacted areas (from tents), hiking trails, bullet or shotgun casings (if you are not on a military firing range), tree stands, etc. Record the recreation use that has had the most significant impact on the plot area first, then the second and third use. For example, in general numerous four-wheel drive or ATV trails would be coded before camping, and camping before hiking, and hiking before fishing. Use the coding system provided as a hierarchy. Do not repeat codes, except codes 0 and 9. Physical recreation evidence must be present to code 1-9. Also, disregard dumping where no evidence of recreation is present. Examine the plot area for clues before spending an exorbitant amount of time trying to find evidence that normally would not be found in the area; look for the obvious signs first. When collected: All plots with either one accessible forest land condition class (PLOT STATUS = 1) or one accessible nonforest land condition class when nonforest is being sampled (PLOT STATUS = 2 and NONFOREST SAMPLING STATUS = 1 and NONFOREST PLOT STATUS =1 Field width: 1 digit Tolerance: No errors Values: Code Definition 0 No evidence of recreation use 1 Motor vehicle (four wheel drive, ATV, motorcycle) 2 Horse riding 3 Camping 4 Hiking 5 Hunting/shooting 6 Fishing 7 Boating – physical evidence such as launch sites or docks 9 Other – recreation use where evidence is present, such as human litter, but purpose is not clear or does not fit into above categories.

Item 4.3.5.6 RECREATION USE 2 (PACI) [PLOT.REUSECD2] Chapter 4: Record the second most significant recreation use impact. See RECREATION USE 1 for coding instructions.

Item 4.3.5.7 RECREATION USE 3 (PACI) [PLOT.REUSECD3]

Record the third most significant recreation use impact. See RECREATION USE 1 for coding instructions. PLOT LEVEL DATA pg.46 Item 4.3.5.8 WATER ON PLOT (CORE 1.16) [PLOT.WATERCD] Record the water source that has the greatest impact on the area within the accessible forest/nonforest land portion of any of the four subplots. The coding hierarchy is listed in order from large permanent water to temporary water. This variable can be used for recreation, wildlife, hydrology, and timber availability studies. When collected: All plots with either at least one accessible forest land condition class (PLOT STATUS = 1) or one accessible nonforest land condition class when nonforest is field-measured (PLOT STATUS = 2 and NONFOREST SAMPLING STATUS = 1 and NONFOREST PLOT STATUS = 1) Field width: 1 digit Tolerance: No errors Values: Code Definition 0 None – no water sources within the accessible forest/nonforest land

1 Permanent streams or ponds too small to qualify as noncensus water 2 Permanent water in the form of deep swamps, bogs, marshes without standing trees present and less than 1.0 acre in size, or with standing trees 3 Ditch/canal – human-made channels used as a means of moving water, such as irrigation or drainage which are too small to qualify as noncensus water 4 Temporary streams 5 Flood zones – evidence of flooding when bodies of water exceed their natural banks 9 Other temporary water – specify in PLOT NOTES

Item 4.3.5.9 PLOT NOTES (CORE 1.21) [PLOT.NOTES] Use these fields to record notes pertaining to the entire plot. If the notes apply only to a specific subplot or other specific aspect of the plot, then make that clear in the notes. When collected: All plots Field width: 2000 characters Tolerance: N/A Values: English language words, phrases and numbers

SUBSECTION 4.3.6 REFERENCE POINT ATTRIBUTES Record the following items which describe the reference point (RP) and the course from the RP to the plot as described in the Subsection 3.3.1, The Reference Point. These data items should match what is recorded on the plot card and on the back of the photo. Note: All ground visited plots (SAMPLE METHOD CODE = 1) require an RP and two witness trees/objects (see Subsection 3.3.2, Witness Trees/Objects).

Item 4.3.6.1 RP TYPE (PNW) [PLOT.RP_TYPE_PNWRS] Record the type of object chosen as the reference point (RP). When collected: When SAMPLE METHOD CODE = 1 Field width: 1 digit Tolerance: No errors Values: Code RP TYPE

PLOT LEVEL DATA COLLECTED IN THE FIELD 1 Tree or stump : 2 Rock 3 Shrub 4 Other – specify in RP notes Section 4.3 pg.47 Item 4.3.6.2 RP SPECIES (PNW) [PLOT.RP_SPCD_PNWRS] If the RP is a tree or stump record the species code. When collected: When RP TYPE = 1 Field width: 4 digits Tolerance: No errors Values: See Appendix B, Tree Species List for species codes

Item 4.3.6.3 RP DIAMETER (PNW) [PLOT.RP_DIA_PNWRS] If the RP is a tree or a stump, measure and record the DBH to the nearest inch (see Section 8.5, Diameter). When collected: When RP TYPE = 1 Field width: 3 digits Tolerance: +/- 10 percent Values: 001 to 999 to the nearest inch

Item 4.3.6.4 RP AZIMUTH (PNW) [PLOT.RP_AZIMUTH_PNWRS] Record, in degrees, the azimuth from the RP to the plot center. When azimuth is determined using a GPS, include this information in the electronic RP NOTES and on the back of the photo. When collected: When SAMPLE METHOD CODE = 1 and RP TYPE > 0 Field width: 3 digits Tolerance: +/- 4 degrees Values: 001 to 360

Item 4.3.6.5 RP HORIZONTAL DISTANCE (PNW) [PLOT.RP_DIST_PNWRS] Record, to the nearest foot, the horizontal distance from the RP to the plot center; an RP should be within 5000 feet of plot center. When horizontal distance is collected using a GPS, include this information in the electronic RP NOTES and on the back of the photo. When collected: When SAMPLE METHOD CODE = 1 and RP TYPE > 0 Field width: 4 digits Tolerance: +/- 5 percent Values: 0000 to 5000 feet

Item 4.3.6.6 RP AZIMUTH/DISTANCE TO SUBPLOT NUMBER (PNW) [PLOT.RP_SUBP_PNWRS] Record the 1-digit number of the subplot which is referenced from the RP. Always reference to subplot 1 unless it is inaccessible (e.g., hazardous, denied access, census/non-census water). If subplot 1 center is Chapter 4: inaccessible, the PC stake should be installed at the lowest numbered subplot that is accessible. When collected: When SAMPLE METHOD CODE = 1 and RP TYPE > 0 Field width: 1 digit Tolerance; No errors Values: 1 to 4 PLOT LEVEL DATA Item 4.3.6.7 RP NOTES (PNW) [PLOT.RP_NOTES_PNWRS] Record notes to explain any special RP situation that may need clarification for future plot visits (e.g., shrub species, height/size of rock, RP not visited, RP AZIMUTH and RP HORIZONTAL DISTANCE collected with a GPS, etc.). Required if RP TYPE = 4 (other). When collected: When SAMPLE METHOD CODE = 1: as needed to describe a special situation with the plot RP; required when RP TYPE = 4 pg.48 Field width: 2000 characters Tolerance: N/A Value: Single words or abbreviated sentences

SUBSECTION 4.3.7 ITEMS RECORDED ON THE PLOT CARD The following items are collected and recorded on the paper plot card; see Appendix J, Plot Jacket, for descriptions of these items and detailed instructions: • Plot Information (plot number, state, county, , crew) • RP Data (species, diameter, azimuth, horizontal distance, to subplot number) • Plot Access Description (travel route) • Plot Narrative Description (condition[s], disturbance[s], treatment[s], hazard[s], and issues not evident in the data) • Plot Diagram (landforms, hazards, special features) • Plot Access (location sketch map) PLOT LEVEL DATA COLLECTED IN THE FIELD : Section 4.3 pg.49 SECTION 4.4 GPS COORDINATES Use a global positioning system (GPS) unit to determine the plot center coordinates and elevation of all plot locations, including nonforest and nonsampled plot locations when SAMPLE METHOD CODE = 1, even if GPS has been used to locate the plot in the past. Additionally, when SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1, crews will also collect a 15 minute GPS rover file at each subplot center with more advanced survey grade GNSS (Global Navigation Satellite System) units that collect multiple-frequency (e.g., L1 and L2 code and carrier phase), multiple-constellation (e.g. GPS and GLONASS satellite) data. These rover files are post-processed in the office to obtain more accurate coordinates for each field subplot location. Multiple records per plot may exist in the GPS screen; records are differentiated by GPS LOCATION TYPE (Item 4.4.3.6). Typically a set of coordinates will only be collected for the PC and subplots when required; additional GPS records (i.e., waypoints) may be recorded and should include a brief description in GPS NOTES (Item 4.4.3.14).

SUBSECTION 4.4.1 SURVEY GRADE GPS SUBPLOT COORDINATES Survey Grade GPS rover files will be collected at each subplot when SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1. This data item will be updatable, and may be changed to 0 when no survey grade GPS subplot rover files can be collected on the plot. Note: This is not a substitute for realtime GPS plot center coordinates collected with either the recreational grade handheld units or the survey grade unit. Operation instructions for using the Survey Grade GPS units can be found in APPENDIX G. When to collect Survey Grade GPS rover files for each subplot: 1. When SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1 AND PLOT STATUS = 1 (sampled: at least one accessible forest land present on plot), coordinates should be taken at all subplots where the subplot center lands in accessible forest land or nonforest land (CONDITION CLASS STATUS 1 or 2). 2. When SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1 AND PLOT STATUS = 2 (sampled: no accessible forest land condition present on plot), coordinates should be taken on all subplots where the subplot center lands in a measurable nonforest condition class when nonforest is being measured (CONDITION CLASS STATUS = 2, NONFOREST SAMPLING STATUS = 1, NONFOREST CONDITION CLASS STATUS = 2). 3. When SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1 and a subplot is nonsampled or if a subplot rover file is not collected for other reasons (e.g., safety, equipment failure), a dummy rover file must be created for the subplot (GPS UNIT TYPE = 0, GPS LOCATION TYPE = 15, 16, 17, or 18). Instructions for creating dummy GNSS rover files for non-sampled subplots are found in Subsection G.2.2, CREATING A DUMMY SUBPLOT ROVER FILE WITH THE GEOXH 6000 UNIT.

SUBSECTION 4.4.2 REALTIME PLOT CENTER GPS COORDINATES Collect at least 60 GPS readings at the plot center. These may be collected in a file for post-processing or

averaged by the GPS unit. See Subsection G.2.3 for instructions for obtaining realtime position coordinates Chapter 4: and elevation with the GeoXH unit. Soon after arriving at plot center, use the GPS unit to attempt to collect coordinates. If suitable positions cannot be obtained, try again before leaving the plot center. If it is still not possible to get suitable coordinates from plot center, attempt to obtain them from a location

within 200 feet of plot center. Obtain the azimuth and horizontal distance from the “offset” location to plot PLOT LEVEL DATA center. Record the azimuth and horizontal distance to the plot center as described in Item 4.4.4.1 and Item 4.4.4.2. Coordinates may be collected further than 200 feet away from the plot center if a laser measuring device is used to determine the horizontal distance from the “offset” location to plot center. Record the azimuth and horizontal distance to plot center as described in Item 4.4.4.1 and Item 4.4.4.2. pg.50 SUBSECTION 4.4.3 GPS UNIT SETTINGS, DATUM, AND COORDINATE SYSTEM Consult the GPS unit operating manual or other regional instructions to ensure that the GPS unit internal settings, including datum and coordinate system, are correctly configured. Use the WGS84 datum and the UTM coordinate system. See Appendix G, GPS Operating Guide, for instructions on setting up and using the GPS units.

Item 4.4.3.1 GPS UNIT TYPE (CORE 1.19.3) [GPS_PNWRS.GPS_TYPE] Record the kind of GPS unit used to collect coordinates. If suitable realtime coordinates cannot be obtained, record “0”. Record “3” for Survey Grade GPS units. Record “2” for most standard handheld GPS units used for collecting realtime plot center coordinates. Record “4” when using Survey Grade GeoXH units for collecting realtime plot center coordinates. When collected: When SAMPLE METHOD CODE = 1 Field width: 1 digit Tolerance: No errors Values: Code Description 0 GPS coordinates not collected, realtime plot center coordinates not collected for nonsampled plots (requires GPS NOTES) 2 Models capable of field-averaging 3 Models capable of producing files that can be post-processed (including GeoXH 6000 units when used for collecting subplot rover files) 4 Models not capable of field-averaging or post-processing (including GeoXH 6000 units when used for collecting realtime plot center coordinates)

Item 4.4.3.2 GPS SERIAL NUMBER (CORE 1.19.4) [GPS_PNWRS.GPS_SERIAL_NBR] Record the last six digits of the serial number on the GPS unit used. For Survey Grade GPS units, select the serial number from the drop down list in the data recorder. When collected: When GPS UNIT TYPE > 0 Field width: 6 digits Tolerance: No errors Values: 000001 to 999999

Item 4.4.3.3 GPS ENTRY METHOD (CORE 1.19.5) [GPS_PNWRS.GPS_ENTRY_METHOD_CD] Identify the method used to record GPS data. This will be set to “0” for all units, including Survey Grade Units. When Collected: GPS UNIT TYPE > 0 Field width: 1 digit Tolerance: No errors Values: Code Description 0 GPS data manually entered 1 GPS data electronically transferred

Item 4.4.3.4 GPS DATUM (CORE 1.19.6) [GPS_PNWRS.GPS_DATUM] This is an auto-generated code indicating the map datum that the GPS coordinates are collected in (i.e., the map datum selected on the GPS unit to display the coordinates). GPS COORDINATES : When collected: When GPS UNIT TYPE = 2 or 4 Field width: 5 characters (cccnn) Tolerance: No errors Values: Code Definition Section 4.4 pg.51 WGS84 World Geodetic System of 1984

Item 4.4.3.5 COORDINATE SYSTEM (CORE 1.19.7) [GPS_PNWRS.GPS_COORD_SYS] This is an auto-generated code indicating the type of coordinate system used to obtain readings. When collected: When GPS UNIT TYPE = 2 or 4 Field width: 1 digit Tolerance: No errors Values: Code Definition 2 UTM coordinate system

Item 4.4.3.6 GPS LOCATION TYPE (PNW) [GPS_PNWRS.GPS_LOC_TYPE] Record the location type for coordinates collected on the ground. Record codes 1 - 7 for realtime coordinates. Record codes 15 - 18 for the survey grade rover file collected on each subplot (four total records required when SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1). • When realtime plot center coordinates cannot be collected record the following GPS information (additional GPS data is not required): GPS UNIT TYPE = 0 GPS LOCATION TYPE = 3 • When realtime coordinates are not collected at plot center but they are collected at another subplot center, two GPS records are required; one for plot center and one for the location where coordinates were actually collected. Enter the first record as the following: GPS UNIT TYPE = 0 GPS LOCATION TYPE = 3 Enter a second record with the GPS data collected at the other subplot center (GPS LOCATION TYPE = 4, 5 or 6). For the data items AZIMUTH TO PLOT CENTER and DISTANCE TO PLOT CENTER, record 000. When collected: All GPS records Field width: 1 digit Tolerance: No errors Values: Code Type Description 1 LZ/TR Landing zone / Truck parking spot 2 RP Reference point 3 PC Plot center (PC) (required) 4 Subplot 2 Use only if PC not possible 5 Subplot 3 Use only if PC not possible

6 Subplot 4 Use only if PC not possible Chapter 4: 7 Other Describe in GPS NOTES and on plot card 15 Subplot 1 Required when SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1 16 Subplot 2 Required when SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1 17 Subplot 3 Required when SURVEY GRADE GPS SUBPLOT PLOT LEVEL DATA ROVER FILES COLLECTED = 1 18 Subplot 4 Required when SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED = 1 pg.52 Item 4.4.3.7 UTM ZONE (CORE 1.19.10) [GPS_PNWRS.UTM_ZONE] Record a 2-digit and 1 character field UTM ZONE as determined by GPS. See Appendix G, GPS Operating Guide to confirm setting and proper UTM Zone. When collected: When COORDINATE SYSTEM = 2 and GPS UNIT TYPE = 2 or 4 Field width: 3 digits Tolerance: When GPS ENTRY METHOD = 0, No errors in data entry When GPS ENTRY METHOD = 1, not applicable Values: Appendix A.2 (FIPS CODES, UTM ZONES, AND DECLINATIONS)

Item 4.4.3.8 EASTING (X) UTM (CORE 1.19.11) [GPS_PNWRS.UTM_EASTING_X] Record the Easting coordinate as determined by GPS. When collected: When COORDINATE SYSTEM = 2 and GPS UNIT TYPE = 2 or 4 Field width: 7 digits Tolerance: When GPS ENTRY METHOD = 0, no errors in data entry When GPS ENTRY METHOD = 1, not applicable Values: 0000000 – 9999999

Item 4.4.3.9 NORTHING (Y) UTM (CORE 1.19.12) [GPS_PNWRS.UTM_NORTHING_Y] Record the Northing coordinate as determined by GPS. When collected: When COORDINATE SYSTEM = 2 and GPS UNIT TYPE = 2 or 4 Field width: 7 digits Tolerance: When GPS ENTRY METHOD = 0, no errors in data entry When GPS ENTRY METHOD = 1, not applicable Values: 0000000 – 9999999

Item 4.4.3.10 GPS ELEVATION (CORE 1.19.16) [GPS_PNWRS.GPS_ELEV] Record the elevation above mean sea level, in feet, as determined by GPS. When collected: When GPS UNIT TYPE = 2 or 4 Field width: 6 digits (1st digit is + or -, last 5 digits are numeric) Tolerance: No errors Values: -00100 to +20000

Item 4.4.3.11 GPS ERROR (CORE 1.19.17) [GPS_PNWRS.GPS_ERROR] Record the error as shown on the GPS unit to the nearest foot up to 999 feet. See Subsection G.2.3, DISPLAYING COORDINATES FOR PLOT CENTER (optional) for instructions for obtaining realtime position precision with the GeoXH unit. When collected: When GPS UNIT TYPE = 2 or 4 Field width: 3 digits Tolerance: No errors Values: 000 – 999

Item 4.4.3.12 NUMBER OF READINGS (CORE 1.19.18) [GPS_PNWRS.GPS_NBR_READINGS] GPS COORDINATES : Record a 3-digit code indicating how many readings were averaged by the GPS unit to calculate the plot coordinates. Collect at least 60 readings if possible. When the GeoXH unit (GPS UNIT TYPE = 4) is used for realtime plot center coordinates, record 001. When collected: When GPS UNIT TYPE = 2 or 4 Section 4.4 pg.53 Field width: 3 digits Tolerance: No errors Values: 001 to 999

Item 4.4.3.13 GPS FILENAME (CORE 1.19.19) [GPS_PNWRS.FILENAME] For each subplot, record the rover filename that was entered in the GPS unit when the 15 minute rover file was collected. When collected: When GPS UNIT= 3 and GPS LOCATION TYPE = 15, 16, 17, 18 Field width: 16 digits Tolerance: No errors Values: st-cty-plot%-sp# (e.g. ca-029-05247-sp1 where st is the 2 character state code, cty is the 3 digit county code (including any leading zeros), plot% is the 5 digit plot number (including any leading zeros), sp# is "sp" followed by the 1 digit subplot number 1-4)

Item 4.4.3.14 GPS NOTES (PNW) [GPS_PNWRS.NOTES] Record any notes needed to clarify or explain a special situation in the particular GPS record being defined. When collected: As needed; required with GPS LOCATION TYPE = 7 or GPS UNIT TYPE = 0 Field width: 2000 characters Tolerance: N/A Values: Words and abbreviated sentences

SUBSECTION 4.4.4 CORRECTION FOR OFFSET LOCATION As described in Subsection 4.4.2, realtime plot center coordinates may be collected at a location other than the plot center (an “offset” location) (GPS LOCATION TYPE = 3). If the GPS unit is capable of calculating plot center coordinates then AZIMUTH TO PLOT CENTER and DISTANCE TO PLOT CENTER both equal 000. Record the two data items below.

Item 4.4.4.1 AZIMUTH TO PLOT CENTER (CORE 1.19.14) [GPS_PNWRS.GPS_AZM] Record the azimuth from the location where coordinates were collected to actual plot center. If coordinates are collected at plot center or are corrected in the field to plot center, record 000. When coordinates are not collected at plot center but are collected at another subplot center (GPS LOCATION TYPE = 4, 5 or 6), record 000. Offsets used to collect survey grade subplot rover files are only recorded in the rover file (see Section G.2.1). When collected: When GPS UNIT = 2 or 4 Field width: 3 digits Tolerance: +/- 3 degrees

Values: 000 when coordinates are collected at plot center Chapter 4: 001 to 360 when coordinates are not collected at plot center

Item 4.4.4.2 DISTANCE TO PLOT CENTER (CORE 1.19.15) [GPS_PNWRS.GPS_DIST] Record the horizontal distance in feet from the location where coordinates were collected to the actual plot center. If coordinates are collected at plot center or are corrected in the field to plot center, record 000. PLOT LEVEL DATA When coordinates are not collected at plot center but are collected at another subplot center (GPS LOCATION TYPE = 4, 5 or 6), record 000. As described in Subsection 4.4.2, if a laser range finder is used to determine DISTANCE TO PLOT CENTER, offset locations may be up to 999 feet from the plot center. If a range finder is not used, the offset location must be within 200 feet. Offsets used to collect survey grade subplot rover files are only recorded in the rover file (see Section G.2.1). When collected: When GPS UNIT = 2 or 4 Field width: 3 digits pg.54 Tolerance: +/- 6 feet Values: 000 when coordinates are collected at plot center 001 to 200 when a Laser range finder is not used to determine distance 001 to 999 when a Laser range finder is used to determine distance

SUBSECTION 4.4.5 DOWNLOADED PLOT COORDINATES For most plots, previous estimates of plot coordinates (pinprick location) will be available. These estimates come from several sources and will be of undocumented accuracy, but can be used as an aid in plot location. If available, the approximate plot coordinates will be downloaded to the data recorder and will be printed on the previous plot data sheets (see note below). They can be saved as a waypoint on the GPS unit and used to help locate the plot. Do not change any of the downloaded/printed plot coordinates codes.

Item 4.4.5.1 PREVIOUS UTM ZONE (PACI, PFSL) [PLOT.HIST_PREV_UTM_ZONE] A 2-digit and 1 character field indicating in which UTM ZONE the plot is located. When collected: When COORDINATE SYSTEM = 2 Field width: 3 digits Tolerance: No errors Values: See Appendix A.2 (FIPS CODES, UTM ZONES, AND DECLINATIONS)

Item 4.4.5.2 PREVIOUS EASTING (X) (PACI, PFSL) [PLOT.HIST_PREV_UTM_EASTING_X] This field indicates the Easting as determined from USGS maps, aerial photos, or a previous plot visit. When collected: When COORDINATE SYSTEM = 2 Field width: 7 digits Tolerance: +/- 140 feet Values: 0000000 – 9999999

Item 4.4.5.3 PREVIOUS NORTHING (Y) (PACI, PFSL) [PLOT.HIST_PREV_UTM_NORTHING_Y] This field indicates the Northing as determined from USGS maps, aerial photos, or a previous plot visit. When collected: When COORDINATE SYSTEM = 2 Field width: 7 digits Tolerance: +/- 140 feet Values: 0000000 – 9999999

Item 4.4.5.4 PREVIOUS COORDINATES METHOD (PNW) [PLOT.PREV_COORDINATE_METHOD_PNWRS] This field indicates the method by which previous plot coordinates were obtained. When collected: Downloaded for most plots Field width: 1 character Tolerance: No errors GPS COORDINATES : Section 4.4 pg.55 Values: Code Description D Digitized from USGS maps M Digitized (MDSD) from PI photography (usually small [broad] scale) P Coordinates taken from old PI tables - sometimes computer generated and plotted on maps or digitized from quad maps G Collected at the plot location using a GPS unit T Target (TGT) coordinates originally derived from Albers meters projection I Image (IMG) coordinates derived from ortho photo and rectified to match location of the pinprick S Digitized from SPOT imagery N Coordinates provided by national forests (R5 and R6) - of unknown origin C Hex center Chapter 4: PLOT LEVEL DATA pg.56 GPS COORDINATES : Section 4.4 pg.57 CHAPTER 5 CONDITION CLASS The Forest Inventory and Analysis (FIA) plot is a cluster of four subplots arranged in a fixed pattern. A plot may straddle more than one condition class; subplots are never moved or reconfigured in order to confine all four subplots to a single condition class. Every plot has at least one condition class: the condition class present at plot center (PC, the center of subplot 1). Condition class attributes record information about forest structure, composition, and disturbance. This information allows researchers to group and analyze similar forest types, understand management practices used by different landowners, examine the effects of disturbance, and classify land types. One of the core missions of the FIA program is to estimate and account for changes in forest land. Condition remeasurement protocol and associated data items are designed to allow PNW-FIA to develop change estimates for forest land and timberland by owner groups. PNW FIA reports on the current status of forest land by FOREST TYPE, STAND SIZE CLASS, REGENERATION STATUS and TREE DENSITY. Trends and changes are captured by reconciling CONDITION CLASS STATUS, OWNER GROUP, and RESERVED STATUS with previous measurements.

SECTION 5.1 DETERMINATION OF CONDITION CLASS Step 1. Delineate the plot area by CONDITION CLASS STATUS The first attribute considered when defining a condition class is CONDITION CLASS STATUS. The area sampled by a plot is assigned to condition classes based upon the following differences in CONDITION CLASS STATUS: 1. Accessible forest land 2. Nonforest land 3. Noncensus water 4. Census water 5. Nonsampled – possibility of forest land Forest land and measurable nonforest land define the population of interest for FIA purposes. These are the areas where most of the data collection is conducted. Step 2. Further subdivide accessible forest land by six delineation variables Any condition class sampled as accessible forest land must be further subdivided, in order of listed priority, into smaller condition classes if distinct, contrasting condition classes are present because of variation in any of the following attributes within the sampled area: 1. RESERVED STATUS 2. OWNER GROUP 3. FOREST TYPE 4. STAND SIZE CLASS 5. REGENERATION STATUS 6. TREE DENSITY At time of re-inventory, one additional attribute, PRESENT NONFOREST LAND USE, is used to define Chapter 5: new condition classes if the sampled area on a plot has changed from accessible forest land to nonforest land. Conversions from forest to nonforest become new nonforest conditions whenever they occur regardless of size, except when a previously defined nonforest condition has expanded into an adjacent previously defined forest condition.This expanded condition will be captured through boundary changes on respective subplots and does not constitute a new separate condition. This allows tracking of land use changes without requiring mapping of all nonforest land condition classes on all plots. CONDITION CLASS No other attribute shall be the basis for recognizing contrasting accessible forest land condition classes. For each condition class recognized, several "ancillary attributes" that help describe the condition will be collected, but will not be used for delineation purposes. See ANCILLARY (NON-DELINEATING) DATA ITEMS, Subsection 5.7.2, pg.86, for more information. Note: All condition classes delineated within the 24-foot fixed-radius are mapped on the plot card. See Chapter 7, Boundary References, for instruction on how to map condition class boundaries. Step 3. Delineate measurable Nonforest Land by 3 delineation variables. pg.58 Any condition class sampled as measurable nonforest land must be further subdivided, in order of listed priority, into smaller condition classes if distinct, contrasting condition classes are present because of variation in any of the following attributes within the sampled area: 1. RESERVED STATUS 2. OWNER GROUP 3. PRESENT NONFOREST LAND USE

SECTION 5.2 CONDITION CLASS STATUS DEFINITIONS

SUBSECTION 5.2.1 ACCESSIBLE FOREST LAND Accessible forest land is land that is within the population of interest, is accessible, is on a subplot that can be occupied at subplot center, can safely be visited, and meets the following criteria: Forest Land has at least 10 percent canopy cover of live tally tree species of any size or has had at least 10 percent canopy cover of live tally species in the past, based on the presence of stumps, snags (or other evidence) that appear to be less than 30 years old. Additionally, the condition is not subject to nonforest use(s) that prevent normal tree regeneration and succession, such as regular mowing, intensive grazing, or recreation activities. In the cases of land on which either forest is encroaching on adjacent nonforest land, or the land that was previously under a nonforest land use (e.g., agriculture or mining) is reverting to forest naturally, only the live cover criterion applies. In the case of deliberate afforestation - human-assisted conversion of other land use / land cover to forest land -- there must be at least 150 established trees per acre (all sizes combined) to qualify as forest land. Land that has been afforested at a density of less than 150 trees per acre is not considered forest land (see nonforest land below). If the condition experiences regeneration failure or is otherwise reduced to less than 150 survivors per acre after the time of planting / seeding but prior to achieving 10 percent canopy cover, then the condition should not be classified forest land. To qualify as forest land, the prospective condition must be at least 1.0 acre in size and 120.0 feet wide measured stem-to-stem from the outer-most edge. Forested strips must be 120.0 feet wide for a continuous length of at least 363.0 feet in order to meet the acre threshold. Forested strips that do not meet these requirements are classified as part of the adjacent nonforest land. When a forest land condition encroaches into a nonforest land condition, the border between forest and nonforest is often a gradual change in tree cover with no clear and abrupt boundary. In addition, it may be difficult to determine exactly where the forested area meets the minimum cover criteria and where it does not. For these situations, determine where the land clearly meets the 10 percent minimum canopy cover, and where it clearly is less than required cover; divide the zone between these points in half, and determine the side of the zone on which the subplot center is located. Classify the condition class of the subplot based on this line, using the class criteria above. CONDITION CLASS STATUS DEFINITIONS CONDITION CLASS STATUS : Section 5.2 pg.59 For example, at measurement time 1, a clear and distinct boundary existed between the forest and nonforest land condition classes. At time 2, however, there now exists a zone of regeneration or small diameter trees between the previous forest condition and where the nonforest clearly remains. If the zone of encroachment is clearly forest where it meets the nonforest, classify the entire zone as forest. If the zone is clearly nonforest up to the original stand, call it all nonforest. If the encroachment or transition zone is not clearly forest where it meets the nonforest, determine where it is clearly forest and where it is clearly nonforest; divide this zone in half, and classify the entire subplot based on which side of the line the subplot center falls. Treated strips - Occasionally, crews will come across plantations of trees, in which rows of trees alternate with strips of vegetation that have Figure 5.1: Example of classifying the condition class of been bulldozed, mowed, tilled, treated with the subplot in a transition zone with forest/nonforest herbicide, or crushed. Because these strip encroachment. treatments are conducted to optimize growth or to release the stand, the areas are considered forest land, and the treatment is considered a timber stand improvement operation. Do not confuse these practices with similar treatments on nonforest lands such as yards or rights-of-way. Contact with the landowner may help determine the intent of a treatment. Indistinct boundary due to the condition minimum-width definition - Do not subdivide subplots where a condition class may change due only to the forest vs. nonforest minimum width (120.0 feet) definition. Although the point where the definition changes from forest to nonforest creates an invisible "line" between conditions, this definitional boundary is not distinct and obvious. See Figure 5.2 and Figure 5.3. Where the point of the definition change occurs on the subplot, determine only if the subplot center is on the forest or nonforest side of that approximate boundary, and classify the entire subplot based on the condition of the subplot center. If the boundary crosses through the center of the subplot, classify the subplot as the condition it most resembles. If the boundary occurs between subplots, classify each subplot based on its relation to the definitional boundary. Chapter 5:

Figure 5.2: Forest condition narrows within a Figure 5.3: Nonforest land condition narrows CONDITION CLASS nonforest land condition. Examine the location of within a forest condition. Examine the location of the subplot center in reference to the approximate the subplot center in reference to the line where the forest narrows to 120.0 feet wide. In approximate line where the nonforest narrows to this example the entire subplot is classified as 120.0 feet wide. In this example the entire forest. subplot is classified as forest. pg.60 Conditions that meet the 10-percent tree canopy cover threshold may be considered nonforest based on land use. Indications of nonforest use may include current extreme grazing, the absence of forest vegetation, and evidence of human habitation and use around maintained structures such as landscaping, gardens, fences, lawns, and play areas. The absence of forest vegetation means that some or all layers of the species present – trees, shrubs, and forbs – differ from what one would expect on forest land undisturbed by nonforest use. For example, a fenced farm lot may have forest trees present, but if extreme sustained grazing has severely diminished or eliminated forest shrub and forb communities and tree regeneration is stifled, the farm lot is likely nonforest.

SUBSECTION 5.2.2 NONFOREST LAND Nonforest land is land that has less than 10 percent canopy cover of tally tree species of any size (live + missing) and, in the case of afforested land, fewer than 150 established trees per acre; OR land that has sufficient canopy cover or stems, but is classified as nonforest land use (the condition is subject to nonforest use(s) that prevent normal tree regeneration and succession, such as regular mowing, intensive grazing, or recreation activities). Nonforest includes areas that have sufficient cover or live stems to meet the Forest Land definition, but do not meet the dimensional requirements. All land conditions not meeting the requirements of forest land will be assigned a PRESENT NONFOREST LAND USE CODE. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1); or all accessible nonforest land condition classes when nonforest is being sampled (NONFOREST CONDITION CLASS SAMPLING STATUS =1) Delineate all nonforest condition classes on ground visited subplots when an accessible forest land condition or a measurable nonforest condition class is present within the 24.0-foot fixed-radius plot (see Subsection 5.7.3, DETERMINING CONDITION CLASSES ON NONFOREST LAND). Example: If accessible forest land, nonforest urban land, and nonforest cropland are all present within a 24.0-foot fixed-radius plot, map the forest land condition and map each nonforest land use as a separate condition class. If there is no accessible forest land or measurable nonforest land condition class present within a subplot’s 24.0-foot radius, then the only nonforest condition class delineated will be the one present at the subplot center ignoring any other nonforest condition classes that may be present. Use normal procedures to map and measure other condition classes (i.e., Census water, noncensus water, and nonsampled conditions, CONDITION STATUS = 3, 4, or 5). Note: An accessible condition class that meets the definition of NONFOREST LAND, has a PRESENT NONFOREST LAND USE that falls under any of the codes 18-26, 42, or 45, listed in section 5.6.6.1, and has greater than or equal to 10 percent vascular vegetation cover will be considered a measurable nonforest condition (NONFOREST SAMPLING STATUS = 1). Certain data items are recorded in measurable nonforest conditions that are not typically measured in nonforest conditions; these are identified in the associated “when collected” field for individual data items. When no accessible forest land condition or measurable nonforest condition classes exist within any of the 24.0-foot fixed-radius subplots, do not delineate nonforest condition classes. When no accessible forest land condition or measurable nonforest condition classes exist within any of the 24.0-foot fixed-radius subplots, do not delineate any other condition classes, including Census water, noncensus water, and nonsampled conditions. Record only one condition and designate the PRESENT NONFOREST LAND USE that is located at plot center for all subplots. Plots that do not have accessible forest land or measurable nonforest condition classes that are entirely nonforest fall into one of the following three categories: 1. The plot is visited on the ground (SAMPLE METHOD CODE = 1) A plot file is created in the field data recorder. GPS coordinates are collected. CONDITION CLASS STATUS DEFINITIONS CONDITION CLASS STATUS : Only one condition is recorded and the PRESENT NONFOREST LAND USE at plot center is designated for each subplot center. 2. The plot is viewed from a distance (SAMPLE METHOD CODE = 2 or 4) A plot file is created in the field data recorder. Section 5.2 pg.61 No GPS coordinates are collected. Only one condition is recorded and the PRESENT NONFOREST LAND USE at plot center is designated for each subplot center. 3. The plot is not field visited or viewed from a distance. (SAMPLE METHOD CODE = 3 or 4) A plot data file is created in the office. No GPS coordinates are collected. Only one condition is recorded and the PRESENT NONFOREST LAND USE at plot center is designated for each subplot center.

SUBSECTION 5.2.3 NONCENSUS WATER Noncensus water includes lakes, reservoirs, ponds, and similar bodies of water 1.0 acre to 4.5 acres in size; and rivers, streams, canals, etc., 30.0 feet to 200.0 feet wide. Water levels fluctuate seasonally and annually; river/stream banks, shorelines, average high water marks, and the point where water prevents the establishment of trees (or woody vegetation/perennial terrestrial plants, where the water feature falls next to nonforest) can be used as guidelines to define the boundary of a water feature. When a noncensus water boundary falls close to a subplot or is mapped, crews must describe how the boundary was defined in the PLOT NARRATIVE DESCRIPTION (Subsection J.2.5) and on the PLOT DIAGRAM (Subsection J.2.6). If a subplot center (including subplot 1) lands in noncensus water do not install the point, even if it can be occupied safely. • No field measurements are made on that subplot. • Establish and measure other subplots following normal procedures (see Subsection 3.4.2, Establishing Subplots when Plot Center is Inaccessible, for instructions on how to install a plot without access to plot center). If the subplot has an accessible condition at subplot center and has noncensus water present anywhere else within its 24.0-foot fixed-radius boundary: • Map the noncensus water area as a separate condition class. • Use normal procedures to map and measure other condition classes. Exception: When a subplot falls within a mangrove forest community the subplot should be measured if the center pin falls on the forest side of the edge of the mangrove roots and the location can be safely occupied by the field crew. Boundaries between forest and noncensus water should be mapped at the outer edge of the mangrove roots.

SUBSECTION 5.2.4 CENSUS WATER Census water includes ocean, lakes, reservoirs, ponds, and similar bodies of water 4.5 acres in size and larger; and rivers, streams, canals, etc. more than 200 feet wide (1990 U.S. Census definition). Water levels fluctuate seasonally and annually; river/stream banks, shorelines, average high water marks, and the point where water prevents the establishment of trees (or woody vegetation/perennial terrestrial plants, where the water feature falls next to nonforest) can be used as guidelines to define the boundary of a water

feature. When a census water boundary falls close to a subplot or is mapped, crews must describe how the Chapter 5: boundary was defined in the PLOT NARRATIVE DESCRIPTION (Subsection J.2.5) and on the PLOT DIAGRAM (Subsection J.2.6). If a subplot center (including subplot 1) lands in Census water, do not install the point, even if it can be occupied safely.

• No field measurements are made on that subplot CONDITION CLASS • Establish and measure other subplots following normal procedures (see Subsection 3.4.2, Establishing Subplots when Plot Center is Inaccessible, for instructions on how to install a plot without access to plot center). If the subplot has an accessible condition at subplot center and has Census water present anywhere else within its 24.0-foot fixed-radius boundary: • Map the Census water area as a separate condition class. • Use normal procedures to map and measure other condition classes. pg.62 Exception: When a subplot falls within a mangrove forest community the subplot should be measured if the center pin falls on the forest side of the edge of the mangrove roots and the location can be safely occupied by the field crew. Boundaries between forest and census water should be mapped at the outer edge of the mangrove roots.

SUBSECTION 5.2.5 NONSAMPLED, POSSIBILITY OF FOREST See CONDITION NONSAMPLED REASON (Item 5.10.0.1) for descriptions of land that qualifies as nonsampled. In cases where a condition is access-denied or hazardous land use, but obviously contains no forest land, record CONDITION CLASS STATUS = 2, 3 or 4. In cases where a condition is access-denied or hazardous land use and has the possibility of forest, record CONDITION CLASS STATUS = 5. If a subplot center (including subplot 1) is located in any nonsampled area, as described in CONDITION NONSAMPLED REASON, the entire subplot is considered to be nonsampled. Record the attributes as described in Section 5.10, NONSAMPLED CONDITION CLASS ATTRIBUTES. Establish and measure other subplots following normal procedures. A plot, subplot, or portion of a subplot is hazardous according to the crew's judgment. If an entire plot is nonsampled, record only one nonsampled condition: the condition at plot center. If the center of a subplot is accessible, but there is a nonsampled area within the 24.0-foot fixed-radius boundary: • Map the nonsampled area as a separate condition class. • Use normal procedures to map and measure other condition classes. CONDITION CLASS STATUS DEFINITIONS CONDITION CLASS STATUS : Section 5.2 pg.63 SECTION 5.3 DELINEATING CONDITION CLASSES DIFFERING IN CONDITION CLASS STATUS The first step in delineating condition classes is to recognize differences in CONDITION CLASS STATUS. The most common difference is adjacent accessible forest land and nonforest land. Adjacent accessible forest land and nonforest land condition classes are recognized only if each of the two prospective condition classes is at least 1.0 acre in size, and each is at least 120.0 feet in width. These size and width minimums apply to both accessible forest land and nonforest land. Within an accessible forest land condition class, unimproved roads, rock outcrops, and natural nonforest openings less than 1.0 acre in size and less than 120.0 feet in width are considered forest land and are not delineated as a separate nonforest land condition class. Within a nonforest land condition class, forested areas or linear strips of trees less than 1.0 acre in size and less than 120.0 feet in width are considered part of the nonforest land condition class. Six exceptions to these size and width requirements apply: 1. Developed nonforest land condition: human-caused nonforest land condition classes such as homes or cabins that are less than 1.0 acre in size and 120.0 feet in width and are surrounded by forest land. There are three kinds of developed nonforest land conditions that do not have to meet area or width requirements (see Figure 5.4, Figure 5.5, and Figure 5.6).

Forest Strip <120.0 Feet Wide Forest Strip <120 Feet Wide

Improved Road, Development, or Improved Road, Development, or Right-of-Way R.O.W. <120.0 feet wide >=120 feet wide

Accessible Forest Land Condition Accessible Forest Land Condition

Figure 5.4: Example with a Figure 5.5: Example with a developed nonforest strip <120 developed nonforest strip ≥120 feet wide. Forest strip, while <120 feet wide. Forest strip is not part of feet wide, is still part of the the accessible forest land accessible forest land condition. condition.

A. Improved roads: paved roads, gravel roads, or improved dirt roads regularly maintained for long-term continuing use by normal passenger vehicles. Generally constructed using machinery. The area where the original topography has been disturbed by cutbanks and fill is considered part of the road, if that area is maintained. Unimproved traces and roads created for skidding logs are not considered improved roads. B. Maintained rights-of-way: corridors created for railroads, power lines, gas lines, and canals that are periodically treated to limit the establishment and growth of trees and shrubs. Areas under power Chapter 5: lines are considered maintained rights-of-way even if no current vegetation treatment is evident. CONDITION CLASS pg.64 C. Developments: structures and the maintained area next to a structure, all less Forest than 1.0 acre in size and surrounded by forest land. Examples of developments are >1acre and > 120.0 feet wide houses or trailers on very small lots, Improved Road communication installations in a small cleared area within forest land, and barns Area <120.0 feet wide between switchbacks and sheds. 2. Distinct, alternating strips of forest and <120.0 feet wide nonforest land: this situation occurs when a Area <120.0 feet wide between switchbacks plot or subplot samples a condition class that is less than 1.0 acre in size and less than 120.0 feet in width. The condition class is one of a series of parallel strips of forest and nonforest Forest land in which none of the strips meet the >1acre and > 120.0 feet wide minimum width requirement. This exception applies only to nonforest land conditions that are not listed under exception number 1, e.g., Figure 5.6: Example of a switchback road where the improved roads, maintained rights-of-way, and area between the switchbacks is still forest land. developments(Figure 5.7). A. Many small intermingled strips: For many small intermingled strips, determine the total area that the intermingled strips occupy, and classify according to the CONDITION CLASS STATUS (forest land or nonforest land) that occupies the greater area. If the area of intermingled strips is so large or indistinct as to make a total area determination impractical, then classify the sample as forest land. B. For two alternating strips of forest and nonforest between two qualifying areas of nonforest land and forest land, see Figure 5.7.This figure delineates the boundary between the forest and nonforest land condition classes for four different examples. The plot center defines the plot condition for all strips covered by the arrow. Any subplot that falls in the alternating strips uses this rule. Any subplot that falls in assigned nonforest / forest is assigned that type. Again, this Figure 5.7: Example of alternating strips of forested and nonforested exception applies only conditions. PC is the plot center (center of subplot 1). to nonforest land conditions that are not listed under exception number 1, e.g., improved roads, maintained rights-of- way, and developments. DELINEATING CONDITION CLASSES DIFFERING IN CLASS STATUS DELINEATING : Section 5.3 pg.65 3. The 120.0-foot minimum width for delineation does not apply when a corner angle is 90 degrees or greater (see Figure 5.8). 4. Linear water features: natural water features that are linear in shape such as streams and rivers. A linear water feature must meet the definition for Census or noncensus water to be a separate condition class. Therefore, a linear water feature must be at least 30.0 feet wide and cover at least 1.0 acre. The width of a linear water feature is measured according to the guidelines given in Subsection 5.2.3, NONCENSUS WATER and Subsection 5.2.4, CENSUS WATER. To determine whether a linear water feature qualifies as a separate condition class, rely on all Figure 5.8: Illustration of the 90 degree corner rule. The dotted available information on hand such lines do not create nonforest land conditions. as aerial photos, topographic maps, past survey land calls, and ocular estimates at the current survey visit. Linear water features that do not meet the definition for Census or noncensus water should be classified as forest land only if bounded by forest land on both shores. Crews are not expected to measure the length of a linear water feature to determine if it meets the 1.0 acre requirement; use professional judgment and common sense on any linear water feature. A 30-foot wide stream needs to be 1452 feet long to be an acre in size. 5. Nonsampled conditions are delineated as a separate condition class regardless of size. 6. Areas that were sampled and classified at last inventory as accessible forest land and are now nonforest become new nonforest conditions whenever they occur, regardless of size, except when a previously defined nonforest condition has expanded into an adjacent previously defined forest condition. This expanded condition will be captured through boundary changes on respective subplots and does not constitute a new separate condition. Chapter 5: CONDITION CLASS pg.66 SECTION 5.4 DELINEATING CONDITION CLASSES WITHIN ACCESSIBLE FOR- EST LAND Accessible forest land is subdivided into condition classes that are based on differences in RESERVED STATUS, OWNER GROUP, FOREST TYPE, STAND SIZE CLASS, REGENERATION STATUS, and TREE DENSITY. Section 5.1, DETERMINATION OF CONDITION CLASS, applies when delineating contrasting forest condition classes. Specific criteria apply for each of the six attributes and are documented by attribute in Item 5.7.1.1 (RESERVED STATUS) through Item 5.7.1.15 (TREE DENSITY). “Stands” are defined by the plurality of crown cover for all live trees, saplings, and seedlings that are not overtopped. Additionally, each separate forest condition class recognized within accessible forest land must be at least 1.0 acre in size and at least 120.0 feet in width. If prospective contrasting forest land condition classes do not each meet these minimum size and width requirements, the most similar prospective conditions should be combined until these minimums are attained. No other attribute shall be the basis for recognizing contrasting condition classes within accessible forest land. For each condition class recognized, many “ancillary attributes” that help describe the condition will be collected, but will not be used for delineation purposes (see ANCILLARY (NON-DELINEATING) DATA ITEMS, Subsection 5.7.2, pg.86). General instructions for delineating condition classes within accessible forest lands: 1. Distinct boundary within a subplot or microplot – Separate condition classes ARE recognized if, within a subplot or microplot, two (or more) distinctly different condition classes are present and delineated by a distinct, abrupt boundary. The boundary is referenced (see Boundary References, Chapter 7). 2. Indistinct boundary within a subplot – Separate condition classes are NOT recognized if the prospective condition classes abut along an indistinct transition zone, rather than on an abrupt, obvious boundary. Only one condition is recognized, and the subplot is classified entirely as the condition it most resembles. Example: The four subplots all sample only accessible forest land. Subplots 1, 3, and 4 sample what is clearly a stand of large-diameter trees. Subplot 2 falls in the middle of a stand-size transition zone. In the zone, the large-diameter stand phases into a sapling stand. Subplot 2 must not be divided into two condition classes on the basis of stand size. Instead, it is treated entirely as part of the large-diameter condition class or is assigned entirely to a new condition class that is classified as a seedling-sapling stand. The latter occurs only if the crew thinks the entire subplot is more like a stand of seedlings-saplings than a stand of large-diameter trees; then the boundary between the large- and small-diameter stands is assumed to occur between and not on the subplots. 3. A boundary or transition zone between fixed- radius subplots that sample distinctly different condition classes – Separate condition classes are recognized and recorded when a valid attribute obviously differs between two fixed-radius subplots, but a distinct boundary or indistinct transition zone exists outside the sampled (fixed-radius) area of the subplots. In such cases, a boundary, if present, is not referenced. Example: The northernmost subplot (2) samples entirely accessible forest land. The other three subplots (1, 3, and 4) fall clearly in a nonforest meadow. Between subplot 1 and 2 is a transition zone; the number of trees present goes from none to what clearly represents forest land. Two condition classes are sampled: accessible forest land sampled on subplot 2, and nonforest land sampled on the other subplots. 4. Riparian forest area – A riparian forest area is defined as a forest area between 30.0 and 120.0 feet wide, and 1.0 acre or more in size (cumulative) and adjacent to but not necessarily present on both sides of a naturally occurring or artificially created body of water or watercourse with continuous or intermittent flow. Riparian forest areas may be associated with but not limited to streams, rivers, lakes, sloughs, seeps, springs, marshes bogs, beaver ponds, sink holes, cypress domes and ponds, DELINEATING CONDITION CLASSES WITHIN ACCESSIBLE FOREST LAND CONDITION CLASSES WITHIN DELINEATING

: human-made ditches and canals. A riparian forest area must be associated “within forest” (i.e., must be surrounded by forest on at least one side) and contain at least one distinct and obvious change in a condition class delineation attribute from its adjacent accessible forest land condition class. Figure 5.9 through Figure 5.14 provide examples of when to delineate riparian forest area as a separate condition class. This special size allowance for an accessible riparian forest land condition class only applies if the riparian area would otherwise meet the definition for accessible forest land (i.e., the Section 5.4 pg.67 riparian area meets canopy cover requirements and is not subject to nonforest land uses as described in Subsection 5.7.3). Note: When the width of forest adjacent to a body of water or water course is between 120.0 feet and 150.0 feet and the width of the riparian forest is at least 30.0 feet wide, the rules for identifying the non-riparian forest (at least 30.0 feet but less than 120.0 feet) need to be modified. The non-riparian forest can be between 30.0 feet and 120.0 feet and mapped as a separate condition as long as it meets the criteria for delineating a separate condition class, otherwise it will be an inclusion in the riparian forest condition class. A riparian forest area (i.e., a band of alder trees along a creek within a Douglas-fir condition class) is typically different from the surrounding forest because of forest type. However, a change in any of the six condition class delineating variables may make it a candidate for a riparian area condition class. An area 30 feet wide needs to be 1452 feet long to be an acre in size. An area 60 feet wide needs to be 726 feet long, and an area 90 feet wide needs to be 484 feet long to be an acre in size.

Figure 5.9: (CORE) Forest type B is separate Figure 5.10: (CORE) Forest type B is a separate condition class (riparian) if the band of it is between condition class (riparian) if the band of it is between 30.0 feet and 120.0 feet wide, and is ≥ 1.0 acre in size. 30.0 feet and 120.0 feet wide, and is ≥ 1.0 acre in size.

Figure 5.11: (CORE) If the stream is < 30.0 feet wide, Figure 5.12: (CORE) If the stream is > 30.0 feet wide, forest type B is a separate condition class (riparian) if forest type B is a separate condition class (riparian) if the sum of the two widths of the bands including the either of the two widths of the bands falls between 30.0 stream falls between 30.0 feet and 120.0 feet wide, feet and 120.0 feet wide and is ≥ 1.0 acre in size. and is ≥ 1.0 acre in size. Chapter 5:

Figure 5.13: (CORE) Forest type B is a separate Figure 5.14: (CORE) In a nonforested area, a band of CONDITION CLASS condition class (riparian) if the band of it is between forest type B that is < 120.0 feet wide is NOT 30.0 feet and 120.0 feet wide, and is > 1.0 acre in size. considered a riparian area. It is not a separate condition class at all. pg.68 SECTION 5.5 CONDITION CLASS ATTRIBUTES

SUBSECTION 5.5.1 ACCESSIBLE FOREST LAND A CONDITION CLASS NUMBER and a classification for CONDITION CLASS STATUS are required for every condition class sampled on a plot. For each condition class classified as accessible forest land, a classification is required for each of the following attributes: Item 5.7.1.1, RESERVED STATUS (CORE 2.5.1) Item 5.7.1.5, OWNER GROUP (CORE 2.5.2) ATTRIBUTES WHERE A CHANGE CAUSES Item 5.7.1.9, FOREST TYPE (CORE 2.5.3) Item 5.7.1.11, STAND SIZE CLASS (CORE 2.5.4) A SEPARATE ACCESSIBLE FOREST LAND Item 5.7.1.13, REGENERATION STATUS (CORE 2.5.5) CONDITION CLASS Item 5.7.1.15, TREE DENSITY (CORE 2.5.6)

Item 5.7.2.1, OWNER CLASS (CORE OPTIONAL 2.5.8) Item 5.7.2.4, ARTIFICIAL REGENERATION SPECIES (CORE 2.5.14) Item 5.7.2.6, STAND AGE (CORE 2.5.15) Item 5.7.2.10, DOMINANT TREE SPECIES 1 (PACI) Item 5.7.2.16, DISTURBANCE 1 (CORE 2.5.16) ANCILLARY - CHANGES DO NOT Item 5.7.2.18, DISTURBANCE YEAR 1 (CORE 2.5.17) DELINEATE A NEW ACCESSIBLE FOREST Item 5.7.2.28, TREATMENT 1 (CORE 2.5.22) LAND CONDITION CLASS Item 5.7.2.30, TREATMENT YEAR 1 (CORE 2.5.23) Item 5.7.2.40, CHAINING CODE (CORE 2.5.37) Item 5.7.2.41, LAND COVER CLASS (CORE 2.5.29) Item 5.8.1.4, CURRENT AFFORESTATION CODE (CORE 2.5.34) Item 5.10.0.1, CONDITION NONSAMPLED REASON (CORE 2.4.3) All other data items including: FOREST TYPE, STAND SIZE CLASS, REGENERATION STATUS, STAND AGE, TREE DENSITY, DISTURBANCE, TREATMENT, and PHYSIOGRAPHIC CLASS, should be determined over the entire condition, including but not exclusive to what is encountered within the subplot/ microplot fixed-radius. Specific instructions for the classification of each attribute follow. Remeasurement plots: The downloaded condition class delineation data items should always be reviewed and updated as necessary. If changes have occurred, reassess the condition class boundaries mapped by the previous crew. On remeasurement plots use the boundary viewer in MIDAS to review the previous condition class layouts and assess whether any change has occurred.

SECTION 5.6 CONDITION REMEASUREMENT Identifying change between the previous and current inventories is a complex process that requires three steps. This process clearly separates previous crew error from physical change (on the ground) and procedural change. Step 1. Correcting previous crew error Verify that PREVIOUS CONDITION CLASS STATUS, PREVIOUS OWNER GROUP, and PREVIOUS RESERVED STATUS had been correct at the last measurement. Review the previous mapping to determine if errors exist in the previous condition mapping. Identify and correct any boundary errors or condition status errors as early as possible. Refer to Subsection 5.6.1 for instructions regarding when to correct boundary errors. Do not change very small boundary changes or errors (less than 10 percent area differences). If any of the previous boundary mapping azimuths (left, right, or corner) or PREVIOUS CORNER DISTANCE are changed, the PREVIOUS CONDITION CLASS NUMBER (Item 5.7.0.2) of the trees on that subplot will have to be verified and manually reassigned. Step 2. Map and record current conditions

CONDITION CLASS ATTRIBUTES CONDITION CLASS Use the previous condition mapping (or corrected if changed in step 1) as a base for mapping the : current condition. Boundaries and condition classes can be added or deleted, and condition class attributes can be altered. Record current CONDITION CLASS STATUS, OWNER GROUP, and RESERVED STATUS. Step 3. Reconcile current with previous conditions Section 5.5 pg.69 If the previous and current conditions are different for CONDITION CLASS STATUS, OWNER GROUP, or RESERVED STATUS, reconcile them as either physical change or procedural change. No other delineating data items need to be reconciled. Previous crew errors should be changed in step 1. The data recorder will only prompt a change reconcile code if any of the above three data items are different.

SUBSECTION 5.6.1 CORRECTING PREVIOUS CREW ERROR Previous crew errors can be corrected at any time, however, it is easier to correct them as early as possible. Before mapping the current condition on any subplot, review: • All previous mapping • PREVIOUS CONDITION CLASS STATUS • PREVIOUS OWNER GROUP • PREVIOUS RESERVED STATUS Do not change any of these values if they were correct under the previous protocol; see Tables 5.1 and 5.2 for a list of procedural changes and manual clarifications. In addition, data item text from the previous inventory has been included for all condition class data items that must be updated if an error was found in PREVIOUS CONDITION CLASS STATUS or PREVIOUS OWNER GROUP; review the previous data item text before updating any data item values. For example, if the previous crew determined a condition to be forested based on the previous definition of forest as land with 5% or greater canopy cover, and the current condition has greater than 5% but less than 10% canopy cover, do not change the PREVIOUS CONDITION CLASS STATUS to nonforest if it seems like the condition had 5% canopy cover at the time of previous inventory. In past years, procedures affecting CONDITION CLASS STATUS, OWNER GROUP and RESERVED STATUS have been clarified. For example, if a subplot center lands in noncensus or Census water, the entire subplot is considered noncensus or Census water. Sometimes field crews established the subplot when they could occupy the center because it was not covered by water at the time and potentially mapped other condition classes present on the subplot. This was clarified in a later manual as incorrect procedure; for the purpose of remeasurement, this is considered “crew error” and needs to be corrected. Chapter 5: CONDITION CLASS pg.70 Table 5.1: Procedural changes Relating to condition delineating data items: Procedural Change Description Affected species/parameters Manual year 30 year rule implemented, to establish time CONDITION CLASS STATUS 2013 line for condition status changing disturbance RESERVED STATUS changed from being RESERVED STATUS 2010 collected only when accessible forest land (CONDITION STATUS = 1) or measured nonforest land on Forest Service administered lands (CONDITION STATUS = 2 and ADMINISTRATIVE FOREST CODE = 1004 or 1005). Now it is collected on all conditions classes (CONDITION STATUS = 1, 2, 3, 4 or 5). Change in RESERVED STATUS definition Excluding all private lands (e.g. Nature 2013 Conservancy) and providing a list of State and Federal agency lands considered reserved (Appendix E). Wilderness Study Areas are not considered reserved. If land was previously managed by a OWNER GROUP = 10, 20 OR 30 2010 different agency, the owner group of the agency was recorded. Now the owner group of the owner is recorded. Two STAND SIZE CLASS rule dropped STAND SIZE CLASS had to be two size classes 2004 away from initial size class to delineate a new condition class Added new NONFOREST LAND USE Code 42: Vegetated Wetlands 2010 codes Added new NONFOREST LAND USE Codes 16: Maintained Wildlife Opening, 17: 2011 codes Windbreak/Shelterbelt, 34: Mining, 43: Beach Changed forest land definition from CONDITION STATUS = 1 and 2 2012 minimum 5% cover to minimum 10% cover Relating to non-delineating data items: STAND AGE codes 997, 998, and 999 no All forest land condition classes 2010 longer have “embedded” meaning; they can be recorded as true age values.

Table 5.2: Manual clarifications that must be corrected Manual clarifications Manual year If subplot center is in noncensus or Census water, the entire subplot is classified as 2003 noncensus or Census water and no mapping is done. Areas under power lines are considered maintained rights-of-way 2002 Nonforest structures or buildings and hazardous cliffs are mapped using a “wedge” (Informal 2006 clarification) Strips of forest area between switchbacks is not considered nonforest land 2008 Adding or deleting previous conditions The data recorder allows entire conditions to be added or deleted in order to correct a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP only. If a condition is added, all previous condition data items (such as PREVIOUS FOREST TYPE and PREVIOUS STAND SIZE CLASS) need to be updated to reflect the condition as it was at the previous measurement. For example, if the previous crew missed that subplot 2 belonged to a different OWNER GROUP, add another condition in the previous condition class screen. Update the PREVIOUS OWNER GROUP, CONDITION REMEASUREMENT

: PREVIOUS OWNER CLASS, to reflect correct owner information at the time of the previous inventory. All of the other condition data item values may be copied from the original condition if they are correct. If any of them are incorrect, update to reflect what it should have been at the time of the previous inventory. Include detailed notes explaining changes to any previous condition data items in PREVIOUS CONDITION NOTES. Section 5.6 pg.71 Changing PREVIOUS CONDITION CLASS STATUS from nonforest to forest If PREVIOUS CONDITION CLASS STATUS changes from nonforest to forest, the suite of delineating and non-delineating data items associated with forest conditions will need to be added for the previous data items (e.g. PREVIOUS FOREST TYPE) to reflect the correct values at the time of the previous measurement. Reconcile all trees on this condition that should have been measured previously as either “missed live” or “missed dead” (Item 8.4.1.11, RECONCILE (CORE 5.7.1)). Reconcile trees that grew enough to be a tally tree now but previously too small as either “ingrowth/reversions” or “through-growth.” Changing PREVIOUS CONDITION CLASS STATUS from forest to nonforest If PREVIOUS CONDITION CLASS STATUS changes from forest to nonforest, the suite of delineating and non-delineating data items associated with nonforest conditions will need to be added for the previous data items (e.g. PREVIOUS NONFOREST LAND USE) to reflect the correct values at the time of the previous measurement. If the previous crew call is changed from forest to nonforest, reconcile all trees on that condition as “cruiser error” (Item 8.4.1.11, RECONCILE (CORE 5.7.1)). Changing previous boundary mapping If the boundary mapped at the previous inventory (azimuths or PREVIOUS CORNER DISTANCE) is edited by the current crew, the data recorder will automatically delete the PREVIOUS CONDITION CLASS NUMBER for the trees tallied on that subplot. The current crew will have to manually assign those tallied trees to a PREVIOUS CONDITION CLASS NUMBER. If the subplot center PREVIOUS CONDITION CLASS NUMBER or PREVIOUS CONTRASTING CONDITION is changed, the data recorder will automatically update the PREVIOUS CONDITION CLASS NUMBER for trees tallied at the previous inventory on that subplot. If only condition level attributes are changed, the PREVIOUS CONDITION CLASS NUMBER does not have to be updated at all. Minor changes of previous azimuths and PREVIOUS CORNER DISTANCE should be avoided. If the azimuth and distance are edited, the data recorder will automatically display a warning if the difference between previous crew mapping and edited mapping is less than 10 percent. A boundary (or boundaries) should only be corrected if the correction results in a 10 percent or greater difference in the area of a condition class on the radius being mapped. There is one exception: • The previous boundary should be corrected if the correction results in a condition class presence/ absence due to an error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP. Do not add or delete boundaries based on previous errors in any other condition class delineating variable. Example 1: A road goes through the middle of a subplot. The previous crew boundaries for the road were mapped to the edge of the pavement. You know the cutbanks should have been included as road area. Correcting the boundary on one side of the road results in a 6 percent increase in the area of the road condition. Correcting the boundary on the other side of the road results in a 5 percent increase in the area of the road condition. Considered together, the corrections increase the road area by 11 percent, so the corrections should be made.

Example 2: The previous crew did not map any boundaries on the subplot. You decide that a Chapter 5: sliver of forest is present on the subplot and should have been mapped. The area of the forest sliver is only 2 percent. However, since it is a presence/absence scenario, the previous boundary must be added. If a tree is tallied and is assigned to the forest condition class, the data recorder will generate an error if the forest condition is not mapped on the subplot. Explanatory Notes CONDITION CLASS If the current crew corrects any previous data items, an explanation describing why values were changed is required in the PREVIOUS CONDITION CLASS NOTES (Item 5.11.1.1). Include what was determined to be wrong and describe, in detail, the reason the current crew knows a previous error was made. If a previous condition class is added, an explanation describing the reason for the addition is required in Item 5.11.1.2, CONDITION CLASS NOTES (PNW). Describe, in detail, the reason the current crew knows a previous error was made. pg.72 If a previous condition class is deleted, an explanation describing the reason for the deletion is required in Item 4.3.5.9, PLOT NOTES (CORE 1.21). Describe, in detail, the reason the current crew knows a previous error was made. If any previous condition class variables other than PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP are incorrect, do not change the previous data, but make a note in PREVIOUS CONDITION CLASS NOTES indicating the errors and the correct values if they are known. CONDITION REMEASUREMENT : Section 5.6 pg.73 SUBSECTION 5.6.2 RECONCILE CURRENT WITH PREVIOUS CONDITIONS The purpose of the reconciliation is to distinguish physical (on the ground) change from any procedural change. For each subplot, the data recorder will calculate a change matrix that includes percent subplot area for each previous – current condition combination. If the previous and current condition values for CONDITION CLASS STATUS, OWNER GROUP, and RESERVED STATUS are not the same, the field crew must reconcile them as either physical or procedural change by recording the appropriate code for OWNER GROUP RECONCILE CODE, CONDITION CLASS STATUS RECONCILE CODE, RESERVED STATUS RECONCILE CODE. If they are the same, nothing has to be reconciled by the field crew. When RECONCILE CODES other than 0 are recorded, a detailed note describing the physical or procedural change is required in Item 5.11.1.3, CHANGE MATRIX NOTES (PNW). Any changes (procedural or physical) for data items other than CONDITION STATUS, OWNER GROUP, and RESERVED STATUS are not reconciled. Reconciliation example: At time 1, the entire subplot is forested. At time 2 the field crew notices a recently built road.

Table 5.3: Condition change matrix

PLOT SUBPLOT CONDITION SUBPLOT CONDITION CLASS OWNER GROUP RESERVED STATUS TYPE NUMBER CLASS NUMBER CONDITION STATUS PROPORTION

t1 t2 t1 t2 reconcile t1 t2 reconcile t1 t2 reconcile 1 1 1 1 0.92 1 1 0 40 40 0 0 0 0 1 1 1 2 0.08 1 2 1 40 40 0 0 0 0

Table 5.4:Condition change matrix key Chapter 5: t1: time 1 t2: time 2 Reconcile codes: 0 no change (auto-filled by data recorder)

1 physical change CONDITION CLASS 3 procedural change After mapping the current condition, the field crew reconciles the condition change. As displayed in the condition change matrix, the field crew only has to fill in the CONDITION CLASS STATUS RECONCILE CODE for the change from forest to road. All previous / current condition combinations with percent area of the plot are calculated by the data recorder. OWNER GROUP and RESERVED STATUS as well as the CONDITION CLASS STATUS for CONDITION CLASS NUMBER 1 (at time 1) to 1 (at time 2) are automatically reconciled by the data recorder with “0” (no change). pg.74 Example 1: Previous mapping • At time 1, the entire plot was mapped as one forested condition on private land. Current situation • The entire plot is still forested. On subplot 2 the current crew maps a separate condition because part of that subplot has OWNER GROUP = 10 (Forest Service). At the reconciliation step, the data recorder prompts the crew to reconcile the change as either procedural or physical change. The crew determines that the Forest Service owned this land at the time of the previous visit. What should you do? • The crew needs to go back to step 1 and edit the previous (incorrect) condition class data items and boundary mapping. After editing the previous information, the data recorder will not prompt to reconcile any changes. Since a boundary was added, the PREVIOUS CONDITION CLASS NUMBER for trees tallied at time 1 will have to be manually entered. Example 2: Previous mapping • On subplot 2, the previous crew mapped a meadow (less than 1 acre) that is surrounded by forest as a nonforest condition. Current situation • Nothing has changed on the plot. What should you do? • The previous mapping was incorrect because the meadow does not meet the size requirements to be considered a separate condition. It should have been included as part of the “forested condition”. The current crew should correct the previous crew error by deleting the nonforest condition (if not present and valid elsewhere on plot), deleting the boundary, and assigning the entire subplot to the forested condition. CONDITION REMEASUREMENT : Section 5.6 pg.75 SECTION 5.7 GENERAL CONDITION CLASS ATTRIBUTES General attributes such as CONDITION CLASS NUMBER and a classification for CONDITION CLASS STATUS are required for every condition class sampled on a plot.

Item 5.7.0.1 CONDITION CLASS NUMBER (CORE 2.4.1) [COND.CONDID][CHANGE_MATRIX_PNWRS.CONDID] On a plot, assign and record a number for each condition class. The condition class at plot center (the center of subplot 1) is designated condition class 1. Number condition classes sequentially as encountered going from subplot 1 through 4, numerically. For remeasurement plots retain the previous CONDITION CLASS NUMBER assignments whenever possible, even if they were assigned in the wrong order. When collected: All condition classes Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 5.7.0.2 PREVIOUS CONDITION CLASS NUMBER (PNW) [PREV_COND_PNWRS.CONDID][CHANGE_MATRIX_PNWRS.PREV_CONDID] A downloaded value that may be updated if an error was made by the previous crew. If updated, change the number for that condition class. When collected: When SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 5.7.0.3 SUBPLOT CONDITION PROPORTION (PNW) [CHANGE_MATRIX_PNWRS.PERCENT_AREA] Proportion of /subplot condition for all previous and current condition class combinations, see RECONCILE CURRENT WITH PREVIOUS CONDITIONS, Subsection 5.6.2, pg.73 and Table 5.3, “Condition change matrix,” on page 73. This data item is calculated by the data recorder and displayed to the user. When collected: When SAMPLE KIND = 2 and condition change occurred Field width: 3 digits Tolerance: No errors Values:001 - 100

Item 5.7.0.4 CONDITION CLASS STATUS (CORE 2.4.2) [COND.COND_STATUS_CD][CHANGE_MATRIX_PNWRS.COND_STATUS_CD] Record the code that describes the status of the condition. The instructions in Delineating Condition Classes Differing in Condition Class Status (Section 5.3) and Condition Class Attributes (Section 5.5) apply when delineating condition classes that differ by CONDITION CLASS STATUS. In situations where a condition is denied access or hazardous, but obviously contains no forest land, record CONDITION CLASS STATUS = 2, 3 or 4. In cases where a condition is access-denied or hazardous land use and has the Chapter 5: possibility of forest, record CONDITION CLASS STATUS = 5. When collected: All condition classes Field width: 1 digit Tolerance: No errors

Values: Code Description CONDITION CLASS 1 Accessible forest land 2 Nonforest land 3 Noncensus water 4 Census water 5 Nonsampled - possibility of forest land pg.76 Item 5.7.0.5 PREVIOUS CONDITION CLASS STATUS (PNW) [COND.PREV_COND_STATUS_CD_PNWRS] [CHANGE_MATRIX_PNWRS.PREV_COND_STATUS_CD_PNWRS] [PREV_COND_PNWRS.COND_STATUS_CD] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the code that describes the status of the condition at the previous measurement. Note: PREVIOUS CONDITION CLASS STATUS has already been updated to current codes. When collected: Downloaded when SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: Code Description 1 Accessible forest land 2 Nonforest land 3 Noncensus water 4 Census water 5 Nonsampled

Item 5.7.0.6 CONDITION CLASS STATUS RECONCILE CODE (PNW) [CHANGE_MATRIX_PNWRS.COND_STATUS_RECONCILE] Record a code indicating which type of change to CONDITION CLASS STATUS occurred, physical or procedural. If a change occurred, CHANGE MATRIX NOTES must be recorded to describe what the change is (e.g., new road construction). Changes from "nonsampled" to “sampled” or from “sampled” to “nonsampled” are automatically reconciled by the data recorder with code 1 (physical change). When collected: When SAMPLE KIND = 2 and condition change occurred Field width: 1 digit Tolerance: No errors Values: Code Change 0 No change (reconciled by data recorder, not a valid code for field crew) 1 Physical change 3 Procedural change

Item 5.7.0.7 CONDITION CLASS STATUS PROCEDURAL CHANGE REASON CODE (PNW) [CHANGE_MATRIX_PNWRS.COND_STATUS_PRCD_CHNG_REASN_CD] Record a code indicating which procedural change occurred. When collected: CONDITION CLASS STATUS RECONCILE CODE = 3 Field width: 2 digits Tolerance: No errors Values: Code Change 02 Species no longer qualifies as tree species 04 Forest land definition change from 5% canopy cover to 10% canopy cover 99 Other (explanatory CHANGE MATRIX NOTES required)

Item 5.7.0.8 NONFOREST CONDITION CLASS STATUS (CORE 2.4.4) [COND.NF_COND_STATUS_CD] Record the code that describes the sampling status of the condition class (see the NONFOREST CONDITION NONSAMPLED REASON codes below for additional information). When collected: When CONDITION CLASS STATUS = 2 and NONFOREST SAMPLING STATUS = 1

GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS Field width: 1 digit : Tolerance: No errors Values: Code Description 2 Accessible nonforest land 5 Nonsampled nonforest Section 5.7 pg.77 Item 5.7.0.9 NONFOREST CONDITION NONSAMPLED REASON (CORE 2.4.5) [COND.NF_COND_NONSAMPLE_REASN_CD] For portions of plots that are measurable nonforest land and can not be sampled (NONFOREST CONDITION CLASS STATUS = 5), record one of the following reasons. When collected: When NONFOREST CONDITION CLASS STATUS = 5 Field width: 2 digits Tolerance: No errors Values: Code Description 02 Denied access - Any area within the sampled area of a plot to which access is denied by the legal owner, or to which an owner of the only reasonable route to the plot denies access. There are no minimum area or width requirements for a condition class delineated by denied access. Because a denied-access condition can become accessible in the future, it remains in the sample and is re-examined at the next occasion to determine if access is available. 03 Hazardous situation - Any area within the sampled area on plot that cannot be accessed because of a hazard or danger, for example cliffs, quarries, strip mines, illegal substance plantations, temporary high water, etc. Although the hazard is not likely to change over time, a hazardous condition remains in the sample and is re-examined at the next occasion to determine if the hazard is still present. There are no minimum size or width requirements for a condition class delineated by a hazardous condition. 10 Other - This code is used whenever a condition class is not sampled due to a reason other than one of the specific reasons listed. An electronic CONDITION CLASS NOTE is required to describe the situation.

Item 5.7.0.10 NONFOREST CONDITION CLASS SAMPLING STATUS (PNW) [COND.NF_COND_SAMPLE_STATUS_PNWRS] Record a code that indicates whether this nonforest condition (CONDITION CLASS STATUS = 2) is part of a nonforest inventory. When a nonforest condition is within Experimental Forest boundaries in Hawaii or on all other Pacific Islands, land meeting the accessible nonforest land definition that also has vascular vegetation cover greater than or equal to 10 percent and a nonforest land use of 18-26, 42, or 45 is considered a measurable nonforest condition class (NONFOREST CONDITION CLASS SAMPLING STATUS = 1). Certain data items are recorded in NONFOREST CONDITION CLASS SAMPLING STATUS = 1 conditions which are not typically measured in nonforest conditions; these are identified in the associated “when collected” field for individual data items. When collected: When NONFOREST CONDITION CLASS STATUS = 2 Field width: 1 digit Tolerance: No errors Values: Code Description 0 Nonforest conditions are not inventoried 1 Nonforest conditions are inventoried (only when conditions are within

Experimental Forest boundaries in Hawaii or on all other Pacific Islands Chapter 5: and a nonforest land use of 18-26, 42, or 45 and when vascular vegetation cover is greater than or equal to 10 percent)

SUBSECTION 5.7.1 ACCESSIBLE FOREST LAND DELINEATING DATA ITEMS

Data items described in this subsection determine if accessible forest land qualifies to be subdivided into CONDITION CLASS separate condition classes. Section 5.1, DETERMINATION OF CONDITION CLASS, applies when delineating contrasting forest condition classes based on these data items. Some of these data items are collected regardless of condition status (e.g., RESERVED STATUS and OWNER GROUP are collected on all conditions). pg.78 Item 5.7.1.1 RESERVED STATUS (CORE 2.5.1) [COND.RESERVCD][CHANGE_MATRIX_PNWRS.RESERVCD] Record the code that identifies the reserved designation for the condition. Reserved land is withdrawn by law(s) prohibiting the management of land for the production of wood products (not merely controlling or prohibiting wood-harvesting methods). Such authority is vested in a public agency or department, and supersedes rights of ownership. The prohibition against management for wood products cannot be changed through decision of the land manager (management agency) or through a change in land management personnel, but rather is permanent in nature. Ownership and the name (designation) of an area are critical for determining reserved status. All private lands (OWNGRPCD = 40) are considered not reserved (due to difficulty in determining legal status); this includes in-holdings, where they can be identified. FIA has adopted a default national list of federal land designations which are considered reserved (seeAppendix E). All federally-owned lands managed by the National Park Service or Fish and Wildlife Service (OWNCD = 21 or 23) are considered reserved. Some lands owned by State or local governments are considered reserved, even in the absence of specific laws covering them, if the agency mandate for that land designation precludes management to produce wood products (e.g., most State Parks). In the absence of State-specific lists of reserved areas, any State or local government land area that includes "park", "wilderness", "wild river", "reserve", or "preserve" in the name is by default considered reserved. There are less common designations that are not on the CORE list and may add exceptions to the list for specific areas that are managed under different legal guidance than is usual for that designation. All designations must be documented using the RESERVED AREA NAME field. Note that harvest can occur in reserved areas, for example for restoration, safety, or recreation. Nonforest areas are reserved if forest lands in the same designated area are considered reserved, or if the area would be considered reserved if forestland was present. Note: The value for this data item may be downloaded (at least for condition class 1) for all plots. However, when field visited, check to be sure the value is correct for the condition. When collected: All condition classes Field width: 1 digit Tolerance: No errors Values: Code Description 0 Not reserved 1 Reserved

Item 5.7.1.2 PREVIOUS RESERVED STATUS (PNW) [PREV_COND_PNWRS.RESERVCD][CHANGE_MATRIX_PNWRS.PREV_RESERVCD] A downloaded value that may not match the code on the printout from the previous visit. Some codes were updated in the office to reflect the status at the time of the previous inventory using the Core 6.0 definition of RESERVED STATUS. The primary changes are that all National Recreation Areas and National Monuments are considered reserved, while Research Natural Areas, Wilderness Study Areas and privately owned lands are now considered not reserved. However, the downloaded value may be incorrect due to the imprecision of the GIS layers or the plot-center coordinate. For example, the downloaded value may be 1 (reserved), but in reality the plot is located just outside a park boundary. If corrected, record the code that identifies the reserved designation for the condition at the previous measurement using the Core 6.0 RESERVED STATUS definition. When collected: When SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: Code Previous Reserved Status 0 Not reserved 1 Reserved GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS : Section 5.7 pg.79 Item 5.7.1.3 RESERVED STATUS RECONCILE CODE (PNW) [CHANGE_MATRIX_PNWRS.RESERVCD_RECONCILE] Record a code indicating which type of change to RESERVED STATUS occurred, physical or procedural. If a change occurred, CHANGE MATRIX NOTES must be recorded to describe what the change is (e.g., new wilderness area). When collected: When SAMPLE KIND = 2 and condition change occurred Field width: 1 digit Tolerance: No errors Values: Code Change 0 No change (reconciled by data recorder, not a valid code for field crew) 1 Physical change 3 Procedural change

Item 5.7.1.4 RESERVED STATUS PROCEDURAL CHANGE REASON CODE (PNW) [CHANGE_MATRIX_PNWRS.RESERV_PRCD_CHNG_REASN_CD] This code describes the reason a procedural change in RESERVE STATUS occurred. When collected: CONDITION CLASS STATUS RECONCILE CODE = 3 Field width: 2 digits Tolerance: No errors Values: Code Description 01 Change in definition of RESERVED STATUS (Core 6.0, 2013) excluding all private lands (e.g. Nature Conservancy) and providing a list of State and Federal agency lands considered reserved (Appendix E) 99 Other (explanatory CHANGE MATRIX NOTES required)

Item 5.7.1.5 OWNER GROUP (CORE 2.5.2) [COND.OWNGRPCD] Record the OWNER GROUP code identifying the ownership of the land in the condition class. Separate conditions because of changes in OWNER GROUP are recognized only where differences can be clearly identified on the ground when visiting the plot (e.g., blazed trees or posted boundary signs). Census Water (CONDITION CLASS STATUS = 4) is considered state owned and should be recorded as OWNER GROUP = 30. When collected: All condition classes Field width: 2 digits Tolerance: No errors Value: Code Description 10 Forest Service 20 Other Federal 30 State and Local Government 40 Private Chapter 5: Item 5.7.1.6 PREVIOUS OWNER GROUP (PNW) [CHANGE_MATRIX_PNWRS.PREV_OWNGRPCD][PREV_COND_PNWRS.OWNGRPCD] Examine the PREVIOUS OWNER GROUP field and determine if it was correctly coded at the previous visit. If the OWNER GROUP of the condition actually changed, do not update this field; change will be captured by comparing OWNER GROUP at the prior visit to OWNER GROUP at the current visit. If the OWNER GROUP recorded at the previous inventory (i.e., PREVIOUS OWNER GROUP) was coded incorrectly use CONDITION CLASS codes 10 through 40 to correct the downloaded code (indicating an error was made at the previous visit). An update to this field requires an explanatory note in the electronic PREVIOUS CONDITION CLASS NOTES. When collected: Downloaded when SAMPLE KIND = 2 Field width: 2 digits Tolerance: No errors pg.80 Value: Code Description 10 PREVIOUS OWNER GROUP should be 10 (Forest Service) 20 PREVIOUS OWNER GROUP should be 20 (Other Federal) 30 PREVIOUS OWNER GROUP should be 30 (State and Local) 40 PREVIOUS OWNER GROUP should be 40 (Private)

Item 5.7.1.7 OWNER GROUP RECONCILE CODE (PNW) [CHANGE_MATRIX_PNWRS.OWNGRPCD_RECONCILE] Record a code indicating which type of change to OWNER GROUP occurred, physical or procedural. If a change occurred, a CHANGE MATRIX NOTE must be recorded to describe what the change is (e.g., new road construction). When collected: When SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: Code Change 0 No change (reconciled by data recorder, not a valid code for field crew) 1 Physical change 3 Procedural change

Item 5.7.1.8 OWNER GROUP PROCEDURAL CHANGE REASON CODE (PNW) [CHANGE_MATRIX_PNWRS.OWN_GRPCD_PRCD_CHNG_REASN_CD] Record a code indicating which procedural change occurred. Use code 99 (other) only if the procedural change defined in code 01 does not apply. When collected: OWNER GROUP RECONCILE CODE = 3 Field width: 2 digits Tolerance: No errors Values: Code Description 99 Other (explanatory CHANGE MATRIX NOTES required)

Item 5.7.1.9 FOREST TYPE (CORE 2.5.3) [COND.FLDTYPCD][COND.FOREST_COMMUNITY_PNWRS] Record the code corresponding to the FOREST TYPE that best describes the species with the plurality of crown cover for all live trees in the condition class that are not overtopped. The Pacific Island FOREST TYPES are taken from Mueller-Dombois and Fosberg, 1998. The instructions in Sections 5.1, 5.3, and 5.4 apply when delineating, within accessible forest land, contrasting conditions based on differences in FOREST TYPE. If STAND SIZE CLASS is nonstocked, then FOREST TYPE is determined by the following hierarchy: For SAMPLE KIND = 2 plots, record the FOREST TYPE of the condition at the previous inventory. For all other plots: 1. Evaluate any seedlings available to determine the FOREST TYPE. 2. If no seedlings exist, use adjacent stands and your best professional judgment to determine FOREST TYPE. The instructions in Section 5.1, DETERMINATION OF CONDITION CLASS and Section 5.5, CONDITION CLASS ATTRIBUTES apply when delineating, within accessible forest land, contrasting conditions based on differences in FOREST TYPE. When collected: All accessible forestland condition classes (CONDITION CLASS STATUS = 1) Field width: 3 digits GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS

: Tolerance: No errors in group or type Section 5.7 pg.81 Values: Code Description Core code (for office use only) 1 Strand or halophytic vegetation - vegetation near the shore 989 containing species adapted to high rates of evaporation by wind and Other Tropical to high salt concentrations from windblown ocean spray or Hardwoods inundation by salt water. 2 Mangrove swamps – trees with high salt tolerance growing on tidally 982 inundated shores and in landlocked depressions. Many species Mangrove have pneumatophores, adaptive structures for aeration of waterlogged root systems. 3 Lowland tropical rainforest – multistoried forest with many canopy- 987 dwelling epiphytes, open ground, and shrub layers. This forest Lower Montane community can extend up the lower slopes with windward rainy Wet and Rain exposures. Forest 4 Montane rainforest –the predominant type on moist hilltops and 987 mountain slopes in many tropical islands. Forests of low stature that Lower Montane are rich in shrubs and epiphytes. Wet and Rain Forest 5 Cloud forest - These forests are covered with clouds or fog much of 988 the time. The trees have low canopies and are often dripping with Cloud Forest moisture. The trees are typically small-leafed and covered with masses of epiphytic mosses and liverworts, which also form a deep ground cover. 6 Mesophytic or moist forest – seasonally dry evergreen forests on 985 leeward, drier slopes. Moist Forest 7 Xerophytic – forests found on truly dry, rain-shadow, leeward 984 mountain slopes and lowlands. Dry Forest 8 Agroforestry – tree species are included in crop or animal production 989 agricultural ecosystems. Other Tropical Hardwoods 9 Plantations – an area planted with tree species for the purpose of 989 timber production. Species planted are mainly eucalypt, mahogany, Other Tropical and pine species that replace indigenous forests and savannas. Hardwoods

Item 5.7.1.10 PREVIOUS FOREST TYPE (PNW) [PREV_COND_PNWRS.FLDTYPCD] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS FOREST TYPE must be added. If added, record the code corresponding to the FOREST TYPE that best describes the species with the plurality of crown cover for all live trees in the condition class that were not overtopped at the previous measurement.

When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 Chapter 5: Field width: 3 digits Tolerance: No errors in group, 100 percent of the time; no errors in type, at least 95 percent of the time Values: See Item 5.7.1.9, FOREST TYPE (CORE 2.5.3)

Item 5.7.1.11 STAND SIZE CLASS (CORE 2.5.4) CONDITION CLASS [COND.FLDSZCD] Record the code that best describes the predominant size class of all live trees, seedlings, and saplings in the condition class. The instructions in Section 5.1 and Section 5.5 apply when delineating, on accessible forest land, contrasting conditions based on differences in STAND SIZE CLASS. pg.82 Within the sampled area on a microplot or subplot, recognize only very obvious contrasting stands of different mean diameter with an abrupt boundary. Example: an obvious abrupt boundary exists within the sampled (fixed-radius) area of a subplot and demarcates a STAND SIZE CLASS change. When in doubt, do not split conditions. Use tree crown cover of all live trees, seedlings, and saplings that are not overtopped to differentiate between stand-size classes. When collected: All accessible forestland condition classes (CONDITION CLASS STATUS = 1) Field width: 1 digit Tolerance: No errors Values: Code Stand Size Class Definition 0 Nonstocked Meeting the definition of accessible forest land, and the following applies: less than 10 percent crown cover by trees, seedlings, and saplings, and not classified as cover trees. 1 < 4.9 inches At least 10 percent crown cover in trees, seedling or (seedling, sapling) saplings; and at least 2/3 of the canopy cover is in trees less than 5.0 inches DBH. 2 5.0 - 8.9 inches At least 10 percent crown cover in trees, seedlings, (softwoods) and saplings; and at least 1/3 of the canopy cover is 5.0 - 10.9 inches in trees greater than or equal to 5.0 inches DBH and (hardwoods) the plurality of the canopy cover is in softwoods between 5.0 - 8.9 inches diameter and/or hardwoods between 5.0 - 10.9 inches DBH. 3 9.0 - 19.9 inches At least 10 percent crown cover in trees, seedlings, (softwoods) and saplings; and at least 1/3 of the canopy cover is 11.0 - 19.9 inches in trees greater than or equal to 5.0 inches DBH and (hardwoods) the plurality of the canopy cover is in softwoods between 9.0 - 19.9 inches diameter and/or hardwoods between 11.0 - 19.9 inches DBH. 4 20.0 - 39.9 inches At least 10 percent crown cover in trees, seedlings, and saplings; and at least 1/3 of the canopy cover is in trees greater than or equal to 5.0 inches DBH and the plurality of the canopy cover is in trees between 20.0 - 39.9 inches DBH. 5 40.0 + inches At least 10 percent crown cover in trees, seedlings, and saplings; and at least 1/3 of the canopy cover is in trees greater than or equal to 5.0 inches DBH and the plurality of the canopy cover is in trees > 40.0 inches DBH.

Item 5.7.1.12 PREVIOUS STAND SIZE CLASS (PNW) [PREV_COND_PNWRS.FLDSZCD] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS STAND SIZE CLASS must be added. If added, record the code that best describes the predominant size class of all live trees in the condition class that were not overtopped at the previous measurement. GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS : Section 5.7 pg.83 The following table was part of the Islands field manual through 2003. Do not correct previous mapping if it was correct using these rules. If no other condition class defining data items are different between accessible forest conditions, map on differences in STAND SIZE CLASS only for the following combinations: If STAND SIZE CLASS of initial Then, the STAND SIZE CLASS of a second condition is: condition must be one of the following to delineate as a separate condition based on STAND SIZE CLASS: 0 (Nonstocked) 1, 2, 3, 4, 5 (stocked forest land) 1 3, 4, 5 2 4, 5 35 6 (Chaparral) 1, 2, 3, 4, 5 (stocked forest land)

When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 Field width: 1 digit Tolerance: No errors Values: Code Stand Size Class Definition 0 Nonstocked Meeting the definition of accessible forest land, and one of the following applies: (a) less than 10 percent stocked by trees of any size, and not classified as chaparral, or (b) for forest types where stocking standards are not available, less than 5 percent crown cover of trees of any size. 1 < 5.0 inches At least 10 percent stocking (or 5 percent crown cover if stocking (seedling, sapling) tables are not available) in trees of any size; and at least 1/3 of the crown cover is in trees less than 5.0 inches DBH. 2 5.0 - 8.9 inches At least 10 percent stocking (or 5 percent crown cover if stocking (softwoods) tables are not available) in trees of any size; and at least 1/3 of the 5.0 - 10.9 inches crown cover is in trees greater than 5.0 inches DBH and the plurality of (hardwoods) the crown cover is in softwoods between 5.0 - 8.9 inches diameter and/or hardwoods between 5.0 - 10.9 inches DBH. 3 9.0 - 19.9 inches At least 10 percent stocking (or 5 percent crown cover if stocking (softwoods) tables are not available) in trees of any size; and at least 1/3 of the 11.0 - 19.9 inches crown cover is in trees greater than 5.0 inches DBH and the plurality of (hardwoods) the crown cover is in softwoods between 9.0 - 19.9 inches diameter and/or hardwoods between 11.0 - 19.9 inches DBH. 4 20.0 - 39.9 inches At least 10 percent stocking (or 5 percent crown cover if stocking tables are not available) in trees of any size; and at least 1/3 of the crown cover is in trees greater than 5.0 inches DBH and the plurality of the crown cover is in trees between 20.0 - 39.9 inches DBH. 5 40.0 + inches At least 10 percent stocking (or 5 percent crown cover if stocking tables are not available) in trees of any size; and at least 1/3 of the crown cover is in trees greater than 5.0 inches DBH and the plurality of the crown cover is in trees > 40.0 inches DBH. Chapter 5: 6 Cover trees (trees Less than 10 percent stocking by trees of any size, and greater than 5 not on species list, percent crown cover of species that comprise cover trees. used for plots classified as nonforest) CONDITION CLASS Item 5.7.1.13 REGENERATION STATUS (CORE 2.5.5) [COND.STDORGCD] Record the code that best describes the artificial regeneration that occurred in the condition. The instructions in Section 5.1, DETERMINATION OF CONDITION CLASS and Section 5.3, DELINEATING CONDITION CLASSES DIFFERING IN CONDITION CLASS STATUS apply when delineating, within accessible forest land, contrasting conditions based on differences in REGENERATION STATUS. pg.84 For a forest land condition to be delineated and/or classified as artificially regenerated, the condition must show distinct evidence of planting or seeding. If it is difficult to determine whether or not a stand has been planted or seeded, then use code 0. If no distinct boundary exists within the sampled (fixed-radius) area on any subplot, then do not recognize separate conditions. In many regions of the West, trees are not planted in rows, and planted stands do not differ in physical appearance from natural conditions. In these cases, there is no need to differentiate conditions based on regeneration status. Note: Plot records or verbal evidence from landowner are acceptable criteria for determining regeneration status. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) Field width: 1 digit Tolerance: No errors Values: Code Regeneration Description 0 Natural Present stand shows no clear evidence of artificial regeneration. Includes unplanted, recently cut lands. 1 Artificial Present stand shows clear evidence of artificial regeneration.

Item 5.7.1.14 PREVIOUS REGENERATION STATUS (PNW) [PREV_COND_PNWRS.STDORGCD] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS REGENERATION STATUS must be added. If added, record the code that best describes the degree of evidence of artificial regeneration which occurred in the condition at the previous measurement. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 Field width: 1 digit Tolerance: No errors Values: See Item 5.7.1.13, REGENERATION STATUS (CORE 2.5.5)

Item 5.7.1.15 TREE DENSITY (CORE 2.5.6) [COND.MAPDEN] Record a code to indicate the relative tree density classification. Base the classification on the number of stems/unit area, basal area, tree coverof all live trees, seedlings, and saplings in the condition that are not overtopped, compared to any other condition class TREE DENSITY recorded on the plot. The instructions in Section 5.1, DETERMINATION OF CONDITION CLASS and Section 5.4, DELINEATING CONDITION CLASSES WITHIN ACCESSIBLE FOREST LAND apply when delineating, within accessible forest land, contrasting conditions based on differences in TREE DENSITY. Codes 2 and higher are used ONLY when all other attributes used to delineate separate condition classes are homogenous, i.e., when a change in density is the ONLY difference within what would otherwise be treated as only one forest condition. Otherwise, code 1 for all condition classes. Codes 2 and higher are usually, but not always, used to demarcate areas that differ from an adjacent area due to forest disturbance, e.g., a partial harvest or heavy, but not total tree mortality due to a ground fire. Delineation by density should only be done when the less-dense condition is 50 percent or less as dense as the more dense condition. Do not distinguish between low-stocked stands or stands of sparse and patchy forest. In order to qualify as a separate condition based on density, there MUST be a distinct, easily observed change in the density of an area's tree cover or basal area. GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS

: Examples of valid contrasting conditions defined by differences in tree density are: • the eastern half of an otherwise homogeneous, 20-acre stand has many trees killed by a bark beetle outbreak • one portion of a stand is partially cut over (with 40 square feet basal area per acre) while the other portion is undisturbed (with 100 square feet basal area per acre) Section 5.7 pg.85 Note: In these examples, RESERVED STATUS, OWNER GROUP, FOREST TYPE, STAND SIZE CLASS, and REGENERATION STATUS are the same. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) Field width: 1 digit Tolerance: No errors Values: Code Description 1 Initial density class 2 Density class 2 - density different than 1 3 Density class 3 - density different than 1 and 2

Item 5.7.1.16 PREVIOUS TREE DENSITY (PNW) [PREV_COND_PNWRS.MAPDEN] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS TREE DENSITY must be added. If added, record a code to indicate the relative tree density classification at the previous measurement. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 Field width: 1 digit Tolerance: No errors Values: See Item 5.7.1.15, TREE DENSITY (CORE 2.5.6) Chapter 5: CONDITION CLASS pg.86 SUBSECTION 5.7.2 ANCILLARY (NON-DELINEATING) DATA ITEMS

Item 5.7.2.1 OWNER CLASS (CORE OPTIONAL 2.5.8) [COND.OWNCD_PNWRS] Record the OWNER CLASS code that best corresponds to the ownership of the land in the condition class. Conditions will NOT be delineated based on changes in OWNER CLASS. If multiple OWNER CLASSes occur within a condition class (i.e., within an OWNER GROUP) record the OWNER CLASS closest to the center of the lowest numbered subplot in the condition. Note: When federal land is owned and administered by two separate entities (e.g., BLM and Forest Service), this data item records the legal owner of the land, not the administrator. When collected: All condition classes Field width: 2 digits Tolerance: No errors Values: Core code Code Description (office use only) Owner Classes within Forest Service lands (OWNER GROUP = 10): 11 National Forest 11 12 National Grassland and/or Prairie 12 13 Other Forest Service land 13 Owner Classes within Other Federal lands (OWNER GROUP = 20): 21 National Park Service 21 22 Bureau of Land Management 22 23 Fish and Wildlife Service 23 24 Departments of Defense/Energy 24 25 Other Federal 25 Owner Classes within State and Local Government lands (OWNER GROUP = 30): 31 State including state public universities 31 32 Local (County, Municipality, etc.) including water authorities 32 33 Other Non Federal Public 33 34 Village or communal property (Regional) 32 Owner Classes within Private lands (OWNER GROUP = 40): 41 Corporate 41 42 Non Governmental Conservation / Natural Resources Organization – 42 Examples: Nature Conservancy, National Trust for Private Lands, Pacific Forest Trust, Boy Scouts of America, etc. 43 Unincorporated Partnerships / Associations / Clubs – examples: Hunting 43 Clubs that own, not lease property, recreation associations, 4H, churches,etc. 44 Native American (Indian) - within reservation boundaries 44 45 Individual and Family, including trusts, estates, and family partnerships 45

Item 5.7.2.2 PREVIOUS OWNER CLASS (PNW) [PREV_COND_PNWRS.OWNCD] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous condition is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS OWNER CLASS must be added. If added, record the OWNER CLASS code that best corresponds to the ownership of the land in the condition class at the previous measurement. When collected: When SAMPLE KIND = 2 Field width: 2 digits GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS

: Tolerance: No errors Values: See OWNER CLASS Section 5.7 pg.87 Item 5.7.2.3 RESERVED AREA NAME (CORE 2.5.13) [PREV_COND_PNWRS.RESERVED_AREA_NAME] Record the specific name of the area that identifies the reserved designation for the condition. This will be downloaded for CONDITION CLASS NUMBER 1 and should be verified; for all other conditions, select from the drop-down list in the PDR or type in the correct name. When collected: All conditions with RESERVED STATUS = 1 Field width: Alphanumeric character field Tolerance: No errors Values: English language words, phrases and numbers

Item 5.7.2.4 ARTIFICIAL REGENERATION SPECIES (CORE 2.5.14) [COND.STDORGSP] Record the species code of the predominant tree species for which evidence exists of artificial regeneration in the stand. This attribute is ancillary; that is, contrasting condition classes are never delineated based on variation in this attribute. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) with evidence of artificial regeneration (REGENERATION STATUS = 1) Field width: 4 digits Tolerance: No errors Values: See Appendix B, Tree Species List

Item 5.7.2.5 PREVIOUS ARTIFICIAL REGENERATION SPECIES (PNW) [PREV_COND_PNWRS.STDORGSP] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, and PREVIOUS REGENERATION STATUS = 1, a PREVIOUS ARTIFICIAL REGENERATION SPECIES must be added. If added, record the species code of the predominant tree species for which evidence existed of artificial regeneration in the stand at the previous measurement. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 and PREVIOUS REGENERATION STATUS = 1 Field width: 3digits Tolerance: No errors Values: See Appendix B, Tree Species List

Item 5.7.2.6 STAND AGE (CORE 2.5.15) [COND.FLDAGE_PNWRS] Record the average total age, to the nearest year, of the overstory trees (plurality of all live trees not overtopped in the predominant STAND SIZE CLASS of the condition, determined using local procedures.

Record ”000” for non-stocked stands. Chapter 5: The crew botanist should be able to provide an estimate of stand age given that the trees in the stand originated at approximately the same time. In tropical forests, the continuous process of gap phase dynamics often prevails, where individuals die, form a gap, and are replaced by lower-canopy individuals. Often you cannot determine stand age in stands that are not characterized by stand replacing disturbance. The trees on typhoon-prone islands would be expected to re-initiate growth following disturbance at approximately the same time. CONDITION CLASS An estimate of STAND AGE is required for every forest land condition class defined on a plot. Stand age is usually highly correlated with stand size and should reflect the average age of all trees that are not overtopped. Estimates of STAND AGE should estimate the time of tree establishment (i.e., not age at the point of diameter measurement). Note: For planted stands, estimate age based on the year the stand was planted (i.e., do not add in the age of the planting stock). Developmental stage and known dates of disturbance are likely to be the only guides to estimating stand age. pg.88 If continuous tree replacement by gap phase dynamics appears to characterize a stand, record code 996. Record 997 if you are unable to get a reasonable estimate of stand age and it is not a continuous tree replacement stand. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) Field width: 3 digits Tolerance: +/- 10 percent Values: Null, 000 to 000 to 995 (actual stand age estimate), 996 (gap phase dynamics (regional)), 997 (unable to get a reasonable estimate (regional))

Item 5.7.2.7 PREVIOUS STAND AGE (PNW) [PREV_COND_PNWRS.FLDAGE] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS STAND AGE must be added. If added, record the average total age, to the nearest year, of the trees (plurality of all live trees not overtopped) in the predominant STAND SIZE CLASS of the condition at the previous measurement, determined using local procedures. Record 000 for previously nonstocked stands. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 Field width: 3 digits Tolerance: +/- 10 percent Values: See STAND AGE GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS : Section 5.7 pg.89 Item 5.7.2.8 PHYSIOGRAPHIC CLASS (CORE 2.5.28) [COND.PHYSCLCD] Record the code that best describes the PHYSIOGRAPHIC CLASS of the condition within the plot area; land form, topographic position, and soil generally determine physiographic class. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1), or accessible nonforest condition classes when nonforest is being sampled (NONFOREST CONDITION CLASS SAMPLING STATUS =1) Field width: 2 digits Tolerance: No errors Values: Xeric - Sites that are normally low or deficient in moisture available to support vigorous tree growth. These areas may receive adequate precipitation, but experience a rapid loss of available moisture due to runoff, percolation, evaporation, etc. 11 Dry Tops Ridge tops with thin rock outcrops and considerable exposure to sun and wind. 12 Dry Slopes Slopes with thin rock outcrops and considerable exposure to sun and wind. Includes most mountain/steep slopes with a southern or western exposure. 13 Deep Sands Sites with a deep, sandy surface subject to rapid loss of moisture following precipitation. Typical examples include sand hills, sites along the beach and shores of lakes and streams and many deserts. 19 Other Xeric All dry physiographic sites not described above. Mesic - Sites that have moderate but adequate moisture available to support vigorous tree growth except for periods of extended drought. These sites may be subjected to occasional flooding during periods of heavy or extended precipitation. 21 Flatwoods Flat or fairly level sites outside flood plains. Excludes deep sands and wet, swampy sites. 22 Rolling Uplands Hills and gently rolling, undulating terrain and associated small streams. Excludes deep sands, all hydric sites, and streams with associated floodplains. 23 Moist Slopes and Coves Moist slopes and coves with relatively deep, fertile soils. Often these sites have a northern or eastern exposure and are partially shielded from wind and sun. Includes moist mountain tops and saddles. 24 Narrow Floodplains/ Flood plains and bottomlands less than 1/4-mile in width along rivers and Bottomlands streams. These sites are normally well drained but are subjected to occasional flooding during periods of heavy or extended precipitation. Includes associated levees, benches, and terraces within a 1/4 mile limit. Excludes swamps, sloughs, and bogs 25 Broad Floodplains Flood plains and bottomlands 1/4 mile or wider in width along rivers and streams. These sites are normally well drained but are subjected to occasional flooding during periods of heavy or extended precipitation. Includes associated levees, benches, and terraces. Excludes swamps, sloughs, and bogs with year-round water problems. 29 Other Mesic All moderately moist physiographic sites not described above. Hydric - Sites that generally have a year-round abundance or over-abundance of moisture. Hydric sites are very wet sites where excess water seriously limits both growth and species occurrence. 31 Swamps/Bogs Low, wet, flat forested areas usually quite extensive that are flooded for long periods of time except during periods of extreme drought. Excludes cypress ponds and small drains. Chapter 5: 32 Small Drains Narrow, stream-like, wet strands of forest land often without a well-defined stream channel. These areas are poorly drained or flooded throughout most of the year and drain the adjacent higher ground. 33 Bays and Wet Pocossins Low, wet, boggy sites characterized by peaty or organic soils. May be somewhat dry during periods of extended drought. Examples include the

Carolina bays in the southeast US. CONDITION CLASS 34 Beaver Ponds 35 Cypress Ponds 39 Other Hydric All other hydric physiographic sites pg.90 Item 5.7.2.9 PREVIOUS PHYSIOGRAPHIC CLASS (PNW) [PREV_COND_PNWRS.PHYSCLCD] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS PHYSIOGRAPHIC CLASS must be added. If added, record the code that best describes the PHYSIOGRAPHIC CLASS of the condition at the previous measurement; land form, topographic position, and soil generally determine physiographic class. A related PREVIOUS CONDITION CLASS NOTE is required when correcting a previous crew error. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 Field width: 2 digits Tolerance: No errors Values: See PHYSIOGRAPHIC CLASS (CORE 2.5.28), pg. 89

Item 5.7.2.10 DOMINANT TREE SPECIES 1 (PACI) [COND.DOMINANT_SPECIES1_PNWRS] Record the code corresponding to the TREE SPECIES (Appendix B) with the plurality of cover for all live trees in the condition class that are not overtopped. For example, if a forested condition class contains 30% species A, 30% species B, and 40 % species C, then the DOMINANT TREE SPECIES will be the code for species C. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) Field width: 4 digits Tolerance: No errors Values: see APPENDIX B Tree Species List

Item 5.7.2.11 PREVIOUS DOMINANT TREE SPECIES 1 (PACI) [PREV_COND_PNWRS.DOMINANT_SPECIES1_PNWRS] On remeasurement plots this item will be populated directly from previous visit. The downloaded code for the tree species with the plurality of cover for all live trees in the condition class that are not overtopped.condition class. When collected: SAMPLE KIND = 2 and previous accessible forest land condition classes (PREVIOUS CONDITION CLASS STATUS = 1) Field width: 4 digits Tolerance: No errors Values: see APPENDIX B Tree Species List

Item 5.7.2.12 DOMINANT TREE SPECIES 2 (PACI) [COND.DOMINANT_SPECIES2_PNWRS] Record the code for the second most abundant tree species in each condition class. See Dominant Tree Species 1 for coding instructions. If a second species does not exist, record 0000. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) Field width: 4 digits Tolerance: No errors Values: see APPENDIX B Tree Species List, 0000 (no second tree species present) GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS : Section 5.7 pg.91 Item 5.7.2.13 PREVIOUS DOMINANT TREE SPECIES 2 (PACI) [PREV_COND_PNWRS.DOMINANT_SPECIES2_PNWRS] On remeasurement plots this item will be populated directly from previous visit. The downloaded code for the tree species with the plurality of cover for all live trees in the condition class that are not overtopped. If a second species does not exist, record 0000. When collected: SAMPLE KIND = 2 and previous accessible forest land condition classes (PREVIOUS CONDITION CLASS STATUS = 1) Field width: 4 digits Tolerance: No errors Values: see APPENDIX B Tree Species List, 0000 (no second tree species present)

Item 5.7.2.14 DOMINANT TREE SPECIES 3 (PACI) [COND.DOMINANT_SPECIES3_PNWRS] Record the code for the third most abundant tree species in each condition class. See Dominant Tree Species 1 for coding instructions. If a third species does not exist, record 0000. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) Field width: 4 digits Tolerance: No errors Values: see APPENDIX B Tree Species List, 0000 (no third tree species present)

Item 5.7.2.15 PREVIOUS DOMINANT TREE SPECIES 3 (PACI) [PREV_COND_PNWRS.DOMINANT_SPECIES3_PNWRS] On remeasurement plots this item will be populated directly from previous visit. The downloaded code for the tree species with the plurality of cover for all live trees in the condition class that are not overtopped. If a third species does not exist, record 0000. When collected: SAMPLE KIND = 2 and previously accessible forest land condition classes (PREVIOUS CONDITION CLASS STATUS = 1) Field width: 4 digits Tolerance: No errors Values: see APPENDIX B Tree Species List, 0000 (no second tree species present)

Item 5.7.2.16 DISTURBANCE 1 (CORE 2.5.16) [COND.DSTRBCD1] Record the code corresponding to the presence of the following disturbances. Disturbance can connote positive or negative effects. The area affected by any natural or human-caused disturbance must be at least 1.0 acre in size. Record up to three different disturbances per condition class from most important to least important. This attribute is ancillary; that is, contrasting conditions are never delineated based on variation in this attribute. For initial plot establishment (SAMPLE KIND =1 or 3), the disturbance must be within the last 5 years. For

remeasured plots (SAMPLE KIND = 2) recognize only those disturbances that have occurred since the Chapter 5: previous inventory. Disturbance codes require "significant threshold" damage, which implies mortality and/or damage to 25 percent of all trees in a stand or 50 percent of an individual species' count. Additionally, some disturbances affect land and/or vegetation, but initially may not affect vegetation growth or health (e.g., grazing, browsing, flooding). In these cases, a disturbance should be coded when at least 25 percent of the soil surface or understory vegetation has been affected. CONDITION CLASS Use the general disturbance codes (i.e., 10, 20, etc) only if one of the more specific codes (i.e., 41, 42, etc) does not apply. When coding fire (30), it is important to distinguish ground fire (31) from crown fire (32) where possible. Code “00” if no DISTURBANCE 1 is observed. pg.92

When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) or accessible nonforest condition classes when nonforest is being sampled (NONFOREST CONDITION CLASS SAMPLING STATUS =1) Field width: 2 digits Tolerance: No errors Values: Core Code (office use Code Disturbance Definition only) 00 None No observable disturbance 00 10 Insect damage 10 11 Insect damage to understory vegetation 11 12 Insect damage to trees, including seedlings and saplings 12 20 Disease Damage 20 21 Disease damage to understory vegetation 21 Disease (including mistletoe) damage to trees, including seedlings 22 and saplings 22 30 Fire Crown or ground fire, either prescribed or natural 30 31 Ground fire 31 32 Crown fire 32 40 Animal Damage 40 41 Beaver – Includes flooding caused by beaver 41 42 Porcupine 42 43 Deer/Ungulate 43 44 Bear 44 45 Rabbit 45 Domestic animal or livestock – Includes grazing (including feral 46 cattle) 46 47 Pigs, wild boars 40 50 Weather 50 51 Ice 51 52 Wind – Includes hurricane, tornado 52 53 Flooding – weather induced 53 54 Drought 54 56 Erosion 50 60 Vegetation Suppression, competition, vines 60 Unknown/ unsure/ 70 other 70 Any significant threshold of human caused damage not described Human caused in the DISTURBANCE codes listed or in the TREATMENT codes 80 damage listed. Must include a plot-level note to describe further. 80 90 Geological Disturbances 90 91 Landslide 91 92 Avalanche Track 92 93 Volcanic Blast Zone 93 94 Other Geologic Event 94 95 Earth movements/avalanches 95 96 Tsunami 90 GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS : Section 5.7 pg.93 Item 5.7.2.17 PREVIOUS DISTURBANCE 1 (PNW) [PREV_COND_PNWRS.DSTRBCD1] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous disturbance must be added for the new condition. Note: some of the 2001 codes were less specific. Do not substitute more specific codes. PREVIOUS DISTURBANCE values have already been updated the current codes (i.e., erosion). When collected: When SAMPLE KIND = 2 and previously accessible forest land condition classes (PREVIOUS CONDITION CLASS STATUS = 1) or previously accessible nonforest condition classes when nonforest is being sampled (NONFOREST SAMPLING STATUS = 1 and PREVIOUS CONDITION CLASS STATUS = 2 and NONFOREST CONDITION CLASS STATUS = 2) Field width: 2 digits Tolerance: No errors Values: Code Disturbance Definition 00 None No observable disturbance 10 Insect damage 11 Insect damage to understory vegetation 12 Insect damage to trees, including seedlings and saplings 20 Disease Damage 21 Disease damage to understory vegetation 22 Disease damage to trees, including seedlings and saplings 30 Fire Crown or ground fire, either prescribed or natural 31 Ground fire 32 Crown fire 40 Animal Damage 41 Beaver – Includes flooding caused by beaver 42 Porcupine 43 Deer/Ungulate 44 Bear 45 Rabbit 46 Domestic animal or livestock – Includes grazing 47 Pigs, wild boar 50 Weather 51 Ice 52 Wind – Includes hurricane, tornado 53 Flooding – weather induced 54 Drought 56 Erosion

60 Vegetation Suppression, competition, vines Chapter 5: 70 Unknown/ unsure/other 80 Human Any significant threshold of human caused damage not caused described in the DISTURBANCE codes listed or in the damage TREATMENT codes listed.

91 Landslide CONDITION CLASS 92 Avalanche Track 93 Volcanic Blast Zone 94 Other Geologic Event 95 Earth movement/avalanches pg.94 Item 5.7.2.18 DISTURBANCE YEAR 1 (CORE 2.5.17) [COND.DSTRBYR1] Record the year in which DISTURBANCE 1 occurred. If the disturbance occurs continuously over a period of time, record 9999. When collected: When DISTURBANCE 1 > 00 Field width: 4 digits Tolerance: +/- 1 year for measurement cycles of 5 years +/- 2 years for measurement cycles of > 5 years

Item 5.7.2.19 PREVIOUS DISTURBANCE YEAR 1 (PNW) [PREV_COND_PNWRS.DSTRBYR1] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous disturbance year can be added for the new condition. If added, record the year in which PREVIOUS DISTURBANCE 1 occurred at the previous measurement. If the disturbance occurs continuously over a period of time, record 9999. When collected: When SAMPLE KIND = 2 and PREVIOUS DISTURBANCE 1 > 00 Field width: 4 digits Tolerance: No errors Values: Since the last periodic or within the 5 years prior to the first annual inventory, 9999

Item 5.7.2.20 DISTURBANCE 2 (CORE 2.5.18) [COND.DSTRBCD2] Record the second disturbance here. See DISTURBANCE 1 for coding instructions. Code “00” if no DISTURBANCE 2 is observed.

Item 5.7.2.21 PREVIOUS DISTURBANCE 2 (PNW) [PREV_COND_PNWRS.DSTRBCD2] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous disturbance can be added for the new condition. See PREVIOUS DISTURBANCE 1 for coding instructions.

Item 5.7.2.22 DISTURBANCE YEAR 2 (CORE 2.5.19) [COND.DSTRBYR2] Record the year in which DISTURBANCE 2 occurred. See DISTURBANCE YEAR 1 for coding instructions.

Item 5.7.2.23 PREVIOUS DISTURBANCE YEAR 2 (PNW) [PREV_COND_PNWRS.DSTRBYR2] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous disturbance year can be added for the new condition. See PREVIOUS DISTURBANCE YEAR 1 for coding instructions.

GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS Item 5.7.2.24 DISTURBANCE 3 (CORE 2.5.20) : [COND.DSTRBCD3] Record the third disturbance here. See DISTURBANCE 1 for coding instructions. Code “00” if no DISTURBANCE 3 is observed. Section 5.7 pg.95 Item 5.7.2.25 PREVIOUS DISTURBANCE 3 (PNW) [PREV_COND_PNWRS.DSTRBCD3] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous disturbance can be added for the new condition. See PREVIOUS DISTURBANCE 1 for coding instructions.

Item 5.7.2.26 DISTURBANCE YEAR 3 (CORE 2.5.21) [COND.DSTRBYR3] Record the year in which DISTURBANCE 3 occurred. See DISTURBANCE YEAR 1 for coding instructions.

Item 5.7.2.27 PREVIOUS DISTURBANCE YEAR 3 (PNW) [PREV_COND_PNWRS.DSTRBYR3] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous disturbance year can be added for the new condition. See PREVIOUS DISTURBANCE YEAR 1 for coding instructions.

Item 5.7.2.28 TREATMENT 1 (CORE 2.5.22) [COND.TRTCD1_PNWRS] Forestry treatments are a form of disturbance. These human caused disturbances are recorded separately here for ease of coding and analysis. The term treatment further implies that a silvicultural application has been prescribed. This does not include occasional stumps of unknown origin or sparse removals for firewood, Christmas trees, or other miscellaneous purposes. The area affected by any treatment must be at least 1.0 acre in size. Record up to three different treatments per condition class from most important to least important as best as can be determined. This attribute is ancillary; that is, contrasting conditions are never delineated based on variation in this attribute. For initial plot establishment (SAMPLE KIND = 1 or 3), the treatment must be within the last five years. For remeasured plots (SAMPLE KIND = 2) recognize only those treatments that have occurred since the previous inventory. Code “00” if no TREATMENT 1 is observed. When collected: All accessible forest land condition classes (CONDITION CLASS STATUS = 1) Field width: 2 digits Tolerance: No errors Values: Code Treatment Description 00 None No observable treatment. 10 Cutting The removal of one or more trees from a stand.

20 Site Clearing, slash burning, chopping, disking, bedding, or other practices clearly Chapter 5: preparation intended to prepare a site for either natural or artificial regeneration. 30 Artificial Following a disturbance or treatment (usually cutting), a new stand where at regeneration least 50 percent of the live trees present resulted from planting or direct seeding. 40 Natural Following a disturbance or treatment (usually cutting), a new stand where at regeneration least 50 percent of the live trees present (of any size) were established through CONDITION CLASS the growth of existing trees and/or natural seeding or sprouting. 50 Other The use of fertilizers, herbicides, girdling, pruning or other activities designed to silvicultural improve the commercial value of the residual stand, or chaining, which is a treatment practice used on woodlands to encourage wildlife forage. pg.96 Item 5.7.2.29 PREVIOUS TREATMENT 1 (PNW) [PREV_COND_PNWRS.TRTCD1] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous treatment must be added for the new condition. If added, record the code corresponding to the presence of a treatment since the last periodic inventory or within the 5 years prior to the first annual inventory. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 1 Field width: 2 digits Tolerance: No errors Values: see TREATMENT 1

Item 5.7.2.30 TREATMENT YEAR 1 (CORE 2.5.23) [COND.TRTYR1] Record the year in which TREATMENT 1 occurred. When collected: When TREATMENT 1 > 00 Field width: 4 digits Tolerance: +/- 1 year for measurement cycles of 5 years +/- 2 years for measurement cycles of > 5 years Values: Year that is the same or since the previous annual inventory plot visit, or within the past five years for plots visited for the first time

Item 5.7.2.31 PREVIOUS TREATMENT YEAR 1 (PNW) [PREV_COND_PNWRS.TRTYR1] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous treatment year can be added for the new condition. If added, record the year in which PREVIOUS TREATMENT 1 occurred. When collected: When SAMPLE KIND = 2 and PREVIOUS TREATMENT 1 > 00 Field width: 4 digits Tolerance: No errors Values: Since the last periodic or within the 5 years prior to the first annual inventory

Item 5.7.2.32 TREATMENT 2 (CORE 2.5.24) [COND.TRTCD2_PNWRS] If a stand has experienced more than one treatment, record the second treatment here. See TREATMENT 1 for coding instructionsCode ”00” if no TREATMENT 2 is observed.

Item 5.7.2.33 PREVIOUS TREATMENT 2 (PNW) [PREV_COND_PNWRS.TRTCD2] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous treatment can be added for the new condition. If added, record the code corresponding to the presence of a treatment since the last periodic inventory or within the 5 years prior to GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS

: the first annual inventory. See PREVIOUS TREATMENT 1 for coding instructions, code 00 if none. Section 5.7 pg.97 Item 5.7.2.34 TREATMENT YEAR 2 (CORE 2.5.25) [COND.TRTYR2] Record the year in which TREATMENT 2 occurred. See TREATMENT YEAR 1 for coding instructions.

Item 5.7.2.35 PREVIOUS TREATMENT YEAR 2 (PNW) [PREV_COND_PNWRS.TRTYR2] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous treatment year can be added for the new condition. If added, record the year in which PREVIOUS TREATMENT 2 occurred.

Item 5.7.2.36 TREATMENT 3 (CORE 2.5.26) [COND.TRTCD3_PNWRS] If a stand has experienced more than two treatments, record the third treatment here. See TREATMENT 1 for coding instructionsCode”00”if no TREATMENT 3 is observed.

Item 5.7.2.37 PREVIOUS TREATMENT 3 (PNW) [PREV_COND_PNWRS.TRTCD3] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous treatment can be added for the new condition. If added, record the code corresponding to the presence of a treatment since the last periodic inventory or within the 5 years prior to the first annual inventory. See PREVIOUS TREATMENT 1 for coding instructions, code 00 if none.

Item 5.7.2.38 TREATMENT YEAR 3 (CORE 2.5.27) [COND.TRTYR3] Record the year in which TREATMENT 3 occurred. See TREATMENT YEAR 1 for coding instructions.

Item 5.7.2.39 PREVIOUS TREATMENT YEAR 3 (PNW) [PREV_COND_PNWRS.TRTYR3] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous accessible forestland condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a previous treatment year can be added for the new condition. If added, record the year in which PREVIOUS TREATMENT 3 occurred.

Item 5.7.2.40 CHAINING CODE (CORE 2.5.37) Chapter 5: [COND.CHAINING_CD] Record the code identifying if a condition has been chained, shear bladed, roller chopped, etc., for the purpose of increased forage production. These treatments contrast with silvicultural removals in that little or none of the woody material is removed from the site and there are few residual live trees. CONDITION CLASS When collected: When CONDITION CLASS STATUS = 1 or 2 Field width: 1 digit Tolerance: No errors Values: 0 No 1 Yes pg.98 Item 5.7.2.41 LAND COVER CLASS (CORE 2.5.29) [COND.LAND_COVER_CLASS_CD] Record this variable for all mapped conditions. When multiple LAND COVER CLASSes occur within a mapped condition, then classify based on first LAND COVER CLASS encountered within the condition. As with CONDITION CLASS STATUS, LAND COVER CLASSes must meet the minimum area and width requirements (except those cases where the condition has been solely defined due to developed land uses, such as roads and rights-of-ways). If the condition is less than 1 acre, then apply the key to the condition. Within larger mapped conditions, evaluate the potential for multiple land cover classes as follows: if no prospective land cover classes meet the minimum width and area requirements, apply the key to the acre area that is within the condition being evaluated and closest to the lowest numbered subplot center associated with the condition. If multiple land cover classes (i.e., those which meet minimum area and width requirements) exist in the condition, assign the first land cover class that is encountered to the condition. As with other condition attributes, inclusions (of less than 1 acre) within the condition should be ignored when assigning the LAND COVER CLASS. Therefore, areas of the inclusion within the acre area are ignored when making the relative cover assessments. Apply the key as a guide and/or to verify the LAND COVER CLASS selection. Assignment of LAND COVER CLASS code is hierarchical in nature, and should be performed using the following hierarchical key. Following the guidance of the key, codes should be examined in succession, and the first definition which describes the area of the condition should be chosen. For example, if an area has 15% tree cover that is taller than the 50% shrub cover, it is classified as class 01 (Treeland). Note: Treeland is not equivalent to Forestland (e.g., a recent clearcut could be Forestland, but would not be Treeland). Vegetative cover, as used below, includes the area of ground covered by the vertical projection of the live plant canopy (or other vegetation components like flowers, basal structures or vines) on the area defined by the condition. If foliage is absent due to senescence or dormancy, the cover should be estimated based on the position of plant remains or other evidence of the foliar distribution during the growing season. If burned, then classify based on the remaining live vegetation, including the canopy cover of remaining live trees and shrubs. When the land surface of a condition is covered by deep non-permanent snow, ice, or water, and/or a condition is defined as CONDITION CLASS STATUS 5 (denied access or hazardous), field crews should use aerial imagery, local knowledge, and field observations to best determine LAND COVER CLASS. Full Land Cover Class Definitions • Dominant: Refers to the highest (tallest) life form present, typically trees, then shrubs, then herbaceous layers. • Predominant: Refers to the cover class with the highest percent cover in the condition. • Vegetated: Contains at least 10% vegetation cover (modification of NVCS 2008) • Sparsely Vegetated: Does not contain at least 10% vegetation cover • Natural vegetation is defined as vegetation where ecological processes primarily determine species and site characteristics; that is, vegetation comprised of a largely spontaneously growing set of plant species that are shaped by both site and biotic processes. Human activities influence these interactions to varying degrees (e.g., logging, livestock grazing, fire, introduced pathogens), but do not eliminate or dominate the spontaneous processes. Wherever doubt exists as to the naturalness of a vegetation type (e.g., old fields, various forest plantations), it is classified as part of the natural / semi-natural vegetation (NVCS 2008). • Semi-natural vegetation typically encompasses vegetation types where the species composition and/ or vegetation growth forms have been altered through anthropogenic disturbances such that no clear natural analogue is known, but they are a largely spontaneous set of plants shaped by ecological processes. Natural (or near-natural) and semi-natural vegetation are part of a continuum of change within natural vegetation that reflects varying degrees of anthropogenic and other disturbances (NVCS 2008). Semi-natural vegetation includes vegetation types where the current structure and/or composition is anthropic, but where it is obvious that natural processes have since resumed (e.g., agricultural lands that have naturally reverted to forest). GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS

: • Anthropic Vegetation is defined as vegetation with a distinctive structure, composition, and development determined by regular human activity. Developed vegetation has typically been planted or treated, and has relatively distinctive growth form, floristic, or site features when compared to natural vegetation. Distinctive growth form and structural attributes typically include one or more of the following: Section 5.7 pg.99 a. Dominant herbaceous vegetation that is regularly-spaced and/or growing in rows, often in areas with substantial cover of bare soil for significant periods of the year, usually determined by tillage or chemical treatment b. Dominant vegetation with highly-manipulated growth forms or structure rarely found as a result of natural plant development, usually determined by mechanical pruning, mowing, clipping, etc. c. Dominant vegetation comprised of species not native to the area that have been intentionally introduced to the site by humans and that would not persist without active management by humans (NVCS 2008). Land Cover Classification Key Follow the key in sequence. If a class described the condition, then look no further. 1. >10% vegetative Cover = Vegetated, else 2. 1. 1. Areas where the majority of vegetation (>50% relative cover) has been highly-manipulated = Anthropic Vegetation, else 1.2 1. 1. 1. Areas that are predominantly covered by vegetation grown for the production of food, non- woody fiber, and/or ornamental horticulture, including land in any stage of annual crop production, and land being regularly cultivated for production of crops from perennial plants = 06 Agricultural Vegetation 1. 1. 2. Other areas predominantly covered by vegetation with highly-manipulated growth forms = 07 Developed, Vegetated 1. 2. Areas where majority of vegetation (>50% relative cover) is natural or semi-natural = Natural/ Semi-natural Vegetation 1. 2. 1. Areas on which trees provide 10% or greater canopy cover and are part of the dominant (uppermost) vegetation layer, including areas that have been planted to produce woody crops = 01 Treeland 1. 2. 2. Areas on which shrubs provide 10% or greater cover and are part of the dominant (uppermost) vegetation layer = 02 Shrubland 1. 2. 3. Areas on which herbaceous vegetation provide 10% or greater cover and are part of the dominant (uppermost) vegetation layer = 03 Grassland 1. 2. 4. Areas on which non-vascular vegetation provide 10% or greater cover and are part of the dominant vegetation layer = 04 Non-vascular Vegetation 1. 2. 5. Areas with 10% or greater vegetative cover but no one life form has 10% or more cover = 05 Mixed Vegetation 2. <10% vegetative cover = Sparsely Vegetated 2. 1. Areas persistently and predominantly covered by water (census and noncensus water, permanent snow and ice) and with less that 10% cover of emergent vegetation. = 10 Water 2. 2. Areas predominantly covered with constructed materials with limited plant life = 09 Developed 2. 3. Natural areas with limited vegetation. Areas predominantly covered by bare rock, gravel, sand, silt, clay, or other earthen material, with little (<10% cover) or no "green" vegetation present regardless Chapter 5: of its inherent ability to support life = 08 Barren CONDITION CLASS pg.100 When collected: All condition classes (CONDITION CLASS STATUS = 1, 2, 3, 4, 5) Field width: 2 digits Tolerance: No errors Values: Codes are >10% vegetative cover: 01 Treeland Areas on which trees provide 10% or greater canopy cover and are part of the dominant (uppermost) vegetation layer, including areas that have been planted to produce woody crops. Only include tree species that can be tallied in the region, i.e., that are on the regional species list. Example areas include forests, forest plantations, reverting fields with >10% tree canopy cover, clearcuts with >10% tree canopy cover. This category includes cypress swamps and mangroves (not to be confused with aquatic vegetation). 02 Shrubland Areas on which shrubs or subshrubs provide 10% or greater cover and are part of the dominant (uppermost) vegetation layer, provided these areas do not qualify as Treeland. Shrub/Subshrub — a woody plant that generally has several erect, spreading, or prostrate stems which give it a bushy appearance. This includes dwarf shrubs, and low or short woody vines (NVCS 2008) and excludes any species on FIA’s tree list. Examples include cranberry bogs and other shrub-dominated wetlands, chaparral, and sagebrush. 03 Grassland Areas on which herbaceous vegetation provide 10% or greater cover and are part of the dominant (uppermost) vegetation layer, provided these areas do not qualify as Treeland or Shrubland. This includes herbs, forbs, and graminoid species. Examples include meadows and prairies. Grazed land is also included, but not if the pasture is improved to such an extent that it meets the requirements for Agricultural Vegetation. This category also includes emergent wetland vegetation like seasonally flooded grasslands, cattail marshes, etc. 04 Non-vascular Areas on which non-vascular vegetation provide 10% or greater cover and are part of Vegetation the dominant vegetation layer, provided these areas do not qualify as Treeland, Shrubland, or Grassland. Examples include mosses, sphagnum moss bogs, liverworts, hornworts, lichens, and algae. 05 Mixed Areas with 10% or greater vegetative cover but no one life form has 10% or more cover. Vegetation That is, these areas do not qualify as Treeland, Shrubland, Grassland, or Non-vascular Vegetation, and thus are a mixture of plant life forms. Examples can include early stages of reverting fields and high deserts. 06 Agricultural Areas that are dominated by vegetation grown for the production of crops (food, non- Vegetation woody fiber and/or ornamental horticulture), including land in any stage of annual crop production, and land being regularly cultivated for production of crops from perennial plants. Agricultural vegetation shows a) rapid turnover in structure, typically at least on an annual basis, either through harvesting and/or planting, or by continual removal of above ground structure (e.g., cutting, haying, or intensive grazing), or b) showing strong linear (planted) features. The herbaceous layer may be bare at various times of the year (NVCS 2008). Examples include row crops and closely sown crops; sod farms, hay and silage crops; orchards (tree fruits and nuts, Christmas trees, nurseries of trees and shrubs), small fruits, and berries; vegetables and melons; unharvested crops; cultivated or improved pasture; idle cropland (can include land in cover and soil- improvement crops and cropland on which no crops were planted) (NRI Field guide). When idle or fallow land ceases to be predominantly covered with manipulated vegetation, then it is no longer Agricultural Vegetation. 07 Developed, Areas predominantly covered by vegetation with highly-manipulated growth forms Vegetated (usually by mechanical pruning, mowing, clipping, etc.), but are not Agricultural. This vegetation type typically contains an almost continuous herbaceous (typically grass) layer, with a closely cropped physiognomy, typically through continual removal of above ground structure (e.g., cutting, mowing), and where tree cover is highly variable, or other highly manipulated planted gardens (NVCS 2008). Examples can include lawns, maintained utility rights-of-way, office parks, and cemeteries. Codes are < 10% cover: 08 Barren Natural areas of limited plant life (< 10%). Areas generally characterized by bare rock, gravel, sand, silt, clay, or other earthen material, with little or no "green" vegetation present regardless of its inherent ability to support life. Examples include naturally barren areas such as lava fields, gravel bars and sand dunes, as well as areas where land clearance has removed the vegetative cover. Can include the natural material

GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS portions of quarries, mines, gravel pits, and cut or burned land <10% vegetation. : 09 Developed Areas predominantly covered with constructed materials with limited plant life (< 10%). Examples include completely paved surfaces like roads, parking lots and densely developed urban areas. 10 Water Areas persistently covered and predominated by water and have <10% emergent vegetative cover. Examples include census and noncensus water and permanent snow and ice. For example, only the open water portion of a bog is to be included. Section 5.7 pg.101 SUBSECTION 5.7.3 DETERMINING CONDITION CLASSES ON NONFOREST LAND Within measurable nonforest (NONFOREST SAMPLING STATUS = 1 and NONFOREST CONDITION CLASS SAMPLING STATUS = 1), nonforest land (CONDITION CLASS STATUS = 2) may be subdivided into condition classes that are based on differences in OWNER GROUP, RESERVED STATUS, and NONFOREST LAND USE. See Subsection 5.2.2, NONFOREST LAND, for information on plots that are entirely nonforest.

Item 5.7.3.1 PRESENT NONFOREST LAND USE (CORE 2.5.30) [COND.PRESNFCD_PNWRS] Record this attribute for every nonforest condition class sampled. When areas that were sampled and classified at last inventory as accessible forest land have changed from forest to nonforest, this variable is used to track land use change. Conversions from forest to nonforest become new nonforest conditions whenever they occur, except when a previously defined nonforest condition has expanded into an adjacent previously defined forest condition.This expanded condition will be captured through boundary changes on respective subplots and does not constitute a new separate condition. If a subplot has an accessible forest land or measurable nonforest land condition class present within the 24.0-foot radius, map each nonforest land condition class present. Do not combine nonforest condition classes. Use normal procedures to map and measure other condition classes (i.e., Census water, noncensus water, and nonsampled conditions, CONDITION STATUS = 3, 4, or 5). Example: If accessible forest land, nonforest urban land, and nonforest cropland are all present within a 24.0-foot fixed-radius plot, map the forest land condition and map each nonforest land use as a separate condition class (size and width requirements for condition class delineation must be met, or one of five exceptions to the delineation rules must apply). If there is no accessible forest land or measurable nonforest land condition class present within a subplot’s 24.0-foot radius, then the only nonforest condition class delineated will be the one present at the subplot center ignoring any other nonforest condition classes that may be present. Use normal procedures to map and measure other condition classes (i.e., Census water, noncensus water, and nonsampled conditions, CONDITION STATUS = 3, 4, or 5). Example: If nonforest urban land and nonforest cropland make up the entirety of a 24.0-foot fixed-radius subplot, record only the condition class which occupies the subplot center. When no accessible forest land condition or measurable nonforest condition classes exist within any of the 24.0-foot fixed-radius subplots, do not delineate nonforest condition classes. Record only one condition and designate the PRESENT NONFOREST LAND USE that is located at plot center for all subplots. Note: Gradations of agroforestry will be present on the islands and will be coded with code 18. The following paragraph does NOT pertain to the Hawaiian Islands, but rather to the other Pacific Islands Inventories: On all visited plots with an accessible forest land and grass, forb or shrub land condition classes, map all nonforest condition classes present on the 4-subplot standard layout. Example: if nonforest – urban land and nonforest – cropland are both present within a 24 feet radius subplot, map each land class as a separate condition class. Chapter 5: When collected: All nonforest conditions (CONDITION CLASS STATUS = 2) Field width: 2 digits Tolerance: No errors Values: Core Code Land Use Definition Code 10 Agricultural land Land managed for crops, pasture, or other agricultural use; the area must be at least 1.0 acre in size and 120.0 feet wide (with the exception CONDITION CLASS of windbreak/shelterbelt, which has no minimum width). Use code 10 only for cases not better described by one of the following: 10 11 Cropland 11 12 Pasture Improved through cultural practices such as grading and mowing 12 13 Idle farmland 13 14 Orchard 14 pg.102 15 Christmas tree plantation 15 16 Maintained wildlife opening 16 17 Windbreak/ Shelterbelt 17 18 Low density Agro-forest with less than 10 percent cover of tree species) agro-forest 10 20 Rangeland Land primarily composed of grasses, forbs, or shrubs. This includes lands vegetated naturally or artificially to provide a plant cover managed like native vegetation and does not meet the definition of pasture, vegetated wetlands or chaparral. The area must be at least 1.0 acre in size and 120.0 feet wide 20 21 Grass lands Dominant vegetation is grasses, including Miscanthus floridulus,Pennisetum polystachion, Saccharum spontaneum, Sporobolus diander, Eragrostis spp., Digitaria spp, and Cenchrus echinatus 20 22 Montane Found on mountains that reach above the heavy cloud belt. Mostly grassland/ grassland mixed with xerophytic shrubs and small trees savannah 20 23 Montane bogs Sedges, grasses and reeds growing at elevations where they are covered with clouds or fog most of the time. These bogs are on gently sloping or level areas with impeded drainage. 20 24 Alpine vegetation Dwarfed vegetation of grasses and cushion-plants growing at high altitudes 20 25 Fernland Dense tangles of Dicranopteris growing on steep slopes usually below 600 m (1,900 feet) 20 26 Subxerophytic/ Vegetation found on truly dry, rain-shadow, leeward mountain slopes sclerophyllous and lowlands, consisting of primarily shrub species scrub 20 30 Developed Land used primarily by humans for purposes other than forestry or agriculture. Use the code 30 only for land not better described by one of the following: 30 31 Cultural or Business (industrial/commercial), residential, and other places of Urban: intense human activity 31 32 Rights-of-way: Improved roads, railway, power lines, maintained canal 32 33 Recreation: Parks, skiing, golf courses 33 34 Mining 34 40 Other Land parcels greater than 1.0 acre in size and greater than 120.0 feet wide, which do not fall into one of the uses described above. Examples include undeveloped beaches, barren land (rock, sand), marshes, bogs, ice, and snow. Use the 40 code only for cases not better described by one of the following: 40 41 Naturally Barren rock, sand, lava, glaciers (ice), undeveloped beaches, glacial nonvegetated outwash 41 42 Vegetated Vegetated lands where at some period in the year, the water table is wetland usually at or near the surface, or the land is covered by shallow water. Includes: swamps, peatlands (bogs, fens, muskegs), marshes, and tidal flats 42 43 Beach 43 45 Nonforest- Chaparral 45 GENERAL CONDITION CLASS ATTRIBUTES GENERAL CONDITION CLASS : Section 5.7 pg.103 Item 5.7.3.2 PREVIOUS NONFOREST LAND USE (PNW) [PREV_COND_PNWRS.PRESNFCD_PNWRS][PREV_COND_PNWRS.PRESNFCD] A downloaded value that can only be updated by the current crew when a previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP is corrected. If a previous nonforest condition class is added to correct previous crew error in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP, a PREVIOUS NONFOREST LAND USE must be added. If added, record the PREVIOUS NONFOREST LAND USE for all nonforest conditions (Condition Status 2). Use the codes and classifications listed in NONFOREST LAND USE. There are five new NONFOREST LAND USE codes that would not have been in the previous inventories. Do not update previous information with new codes that were added in later years. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION STATUS = 2 Field width: 2 digits Tolerance: No errors Values: See NONFOREST LAND USE, excluding codes 16, 17, 34, 42, 43 and 45 Chapter 5: CONDITION CLASS pg.104 SECTION 5.8 DETERMINATION OF CROWN COVER VALUES FOR LAND USE CLASSIFICATION

SUBSECTION 5.8.1 INTRODUCTION This section describes the procedures and data items needed to populate the condition-level canopy cover variables (Item 5.8.1.2, LIVE CANOPY COVER (CORE 2.5.32), Item 5.8.1.3, LIVE PLUS MISSING CANOPY COVER (CORE 2.5.33), and Item 5.8.1.6, TOTAL STEMS (CORE 2.5.36)). The procedures should be used whenever LIVE PLUS MISSING CANOPY COVER is not obviously less than 5 percent or not obviously greater than 10 percent. The procedures are also needed for a sensitivity analysis that will assess the differences between a crown cover and a stocking definition of accessible forest land. Therefore, this study will also be conducted on plots when it is questionable whether the condition is 10 percent stocked. Note: The MIDAS program has a function to help compute the percent cover. From the CONDITION screen press CTRL+C to access the Crown Cover Calculator. Enter the dimensions of the crown of each tree or group of trees: Diam 1 – long diameter; Diam 2 – perpendicular to long diameter; count of trees with these dimensions; and L (live) or M (missing). Then press the Add button. The crown contribution will be computed. Continue until all trees are added or you reach 10 percent LIVE PLUS MISSING CANOPY COVER - which ever comes first. Two sets of data will be collected for the study: 1. Cover plot information 2. Stocking tree data

Item 5.8.1.1 CANOPY COVER SAMPLE METHOD (CORE 2.5.31) [COND.CANOPY_CVR_SAMPLE_METHOD_CD] Tree cover and stocking data will be collected on the following plot configurations: 1. A single, fixed-area one acre plot that is a 118-foot radius circle 2. Four fixed-area quarter acre subplots that are 58.9-foot radius circles These cover plot configurations must be entirely within one condition class. When there is only one condition class present on the plot either the single, fixed-area one acre plot should be established from the center of subplot 1 on the FIA annual plot layout or the four fixed area quarter acre subplots should be established from the center of subplots 1, 2, 3, and 4 on the FIA annual plot layout. When multiple condition classes occur on the plot, only use the four fixed-area subplot configuration to collect cover data. Locate “phantom” cover subplots following the installation instructions below so they are completely within one condition class until you have four of them, or you reach 25 percent cover. Do not move phantom subplots to better represent the condition in question if phantom subplots fall in sparsely- treed areas or heavier-treed areas. Make sure to note the location of each cover subplot on the plot diagram on the plot card. Record the CANOPY COVER SAMPLE METHOD used to determine LIVE CANOPY COVER and, LIVE PLUS MISSING CANOPY COVER for the condition. If the ocular method is not used, the appropriate plot- based method should be selected according to the condition's dimensions and shape. Ocular method - The Ocular method is only used in areas that are obviously less than 5 percent LIVE PLUS MISSING CANOPY COVER or obviously greater than 10 percent LIVE PLUS MISSING CANOPY COVER, or when CONDITION CLASS STATUS = 5. In addition to visual inspections of what is on the ground, crews can also use various types of aerial imagery to help determine LIVE CANOPY COVER and LIVE PLUS MISSING CANOPY COVER values using this method. The Ocular method may also be used on CONDITION STATUS 2 conditions where access to the nonforest landcover area may be limited, or the nonforest condition is a developed non-forest land use. Note that when the Ocular method is used, it is likely to be easier for the observer to ignore subplot boundaries and assess the percentage of tree canopy

DETERMINATION OF CROWN COVER VALUES FOR LAND USE CLASSIFICATION OF CROWN COVER VALUES DETERMINATION cover over the condition in question, without regard to the locations of the stems supporting the canopy : over the plot. Section 5.8 pg.105 Acre and subplot method - When the ocular method is not appropriate, refer to data items Item 5.8.1.2, LIVE CANOPY COVER (CORE 2.5.32), Item 5.8.1.3, LIVE PLUS MISSING CANOPY COVER (CORE 2.5.33), and Item 5.8.1.6, TOTAL STEMS (CORE 2.5.36). If LIVE PLUS MISSING CANOPY COVER appears to be greater than 5 percent but not obviously greater than 10 percent, trees must be tallied and crowns measured to determine cover. The acre method refers to the use of a single 1 acre plot or four 1/4 acre subplots. Phantom plot installation - Install phantom subplots as necessary to yield four 1/4-acre sample areas that fall entirely within the questionable condition. Record the location of these phantom or temporary subplots on your four point plot sketch and monument. Establish phantom plots using the following protocol (Figure 5.15): a. Begin by locating the phantom subplots using the "highest" numbered regular subplot that falls entirely in the questionable condition (e.g., 4 is the highest numbered regular subplot, next 3 and then 2). The phantom subplots are located in the following fashion: (1) 120.0 feet at 360 degrees, (2) 120.0 feet at 120 degrees, then (3) 120.0 feet at 240 degrees. b. If this fails to yield 4 subplots that fall entirely within the questionable condition, install the remaining phantom subplots off the next highest numbered regular subplot that falls in the questionable condition. c. If this fails to produce a suitable location, rotate the phantom subplot off the other phantom subplots in the attempted order of installation until 4 subplots have been located in the questionable condition.

2

CONDITION 2 5 QUESTIONABLE FOREST WITH =10%TREE CANOPY COVER

7 1

CONDITION 1 3 4 FOREST WITH 40% TREE CANOPY COVER

6

Figure 5.15: Example of the subplot method phantom subplots.

The general guide for installing phantom cover subplots is: Install the next phantom cover subplot off the highest FIA subplot entirely within the condition, until all the FIA subplots have been exhausted. Then put in Chapter 5: the next phantom cover subplot off the last established phantom cover subplot. For narrow, linear conditions, phantom subplots should be placed methodically within the condition (e.g. divide the length of the strip by 5 to determine the distance between subplots). If the condition in question is too small to establish 4 phantom subplots, (e.g. 236 feet x 236 feet) then use the acre method and install the one phantom 118 foot radius plot in the center of the condition. Use this CONDITION CLASS method as a last resort only. If establishing one phantom 118 foot radius plot at a new location, record COVER SUBPLOT as 1 and take GPS coordinates at the radius center, and enter the coordinates in the electronic plot notes. Record the location of this phantom plot on your four point plot sketch and monument. Make detailed plot notes describing the location of phantom plot. When collected: CONDITION CLASS STATUS = 1, 2, or 5 Field width: 1 digit Tolerance: None pg.106 Values: Code Description Core codes (office use only) 1 Ocular method 1 3 Acre method (one 118 foot radius plot installed) 3 5 Acre method (four 58.9 foot radius plots installed) 3

Item 5.8.1.2 LIVE CANOPY COVER (CORE 2.5.32) [COND.LIVE_CANOPY_CVR_PCT] Record the percentage of LIVE CANOPY COVER for the condition. Include live tally trees, saplings, and seedlings that cover the sample area. For conditions where the LIVE CANOPY COVER is low and there is a question whether it meets 10 percent LIVE PLUS MISSING CANOPY COVER, the crew will measure every crown width within the canopy cover sample area and enter the Total Live Canopy Cover percent from the stocking/cover calculator (always round down to the nearest percent). LIVE CANOPY COVER can be based on an ocular estimate when the condition in question is certain to contain less than 5 percent or greater than 10 percent LIVE PLUS MISSINGCANOPY COVER or CURRENT AFFORESTATION CODE =1 and TOTAL STEMS greater than or equal to 150. For LIVE CANOPY COVER <1 percent (trace), record 01.Do not include the crown portion of trees, saplings, or seedlings that are vertically overtopped by other trees, saplings or seedlings. When collected: All CONDITION CLASS STATUS = 1 2 or 5 Field width: 2 digits Tolerance: 0 - 12% - No errors 13 - 20% - 10% error 21 - 100% - 25% error Values: 00 - 99 (where 99 = 99-100 %)

Item 5.8.1.3 LIVE PLUS MISSING CANOPY COVER (CORE 2.5.33) [COND.LIVE_MISSING_CANOPY_CVR_PCT] Record the percentage of LIVE PLUS MISSING CANOPY COVER for the condition by adding the LIVE CANOPY COVER plus the estimated missing canopy cover that existed prior to disturbance (harvesting, fire,etc). Include live and dead and removed tally trees, saplings, and seedlings. Dead trees and dead portions of live trees are not considered as missing unless it is part of the condition disturbance treatment, historical disturbance, or historical treatment. Only include dead or removed tally trees, saplings, and seedlings that appear to have died or been removed within the last 30 years. When CANOPY COVER SAMPLE METHOD > 1, enter the Total Live Plus Missing Cover percent from the stocking/cover calculator. Otherwise, base the estimate on field observations, aerial photos, historical aerial imagery, and similar evidence of undisturbed conditions. The total of the LIVE PLUS MISSING CANOPY COVER cannot exceed 100 percent. When collected: All CONDITION CLASS STATUS = 1, 2 or 5 Field width: 2 digits Tolerance: 0 - 12% - No errors 13 - 20% - 10% error 21 - 100% - 25% error Values: 00 - 99 (where 99 = 99-100%)

Item 5.8.1.4 CURRENT AFFORESTATION CODE (CORE 2.5.34) [COND.AFFORESTATION_CD] Record the code identifying a condition that has no evidence of prior forest, but does have evidence suggesting deliberate afforestation attempts (planted or prepared to promote tree establishment) to convert to forest in the current inventory cycle or since the last measurement. When collected: When CONDITION CLASS STATUS = 1 or 2 DETERMINATION OF CROWN COVER VALUES FOR LAND USE CLASSIFICATION OF CROWN COVER VALUES DETERMINATION

: Field width: 1 digit Tolerance: No errors Values: 0 No 1 Yes Section 5.8 pg.107 Item 5.8.1.5 PREVIOUS AFFORESTATION CODE (CORE 2.5.35) [COND.PREV_AFFORESTATION_CD] Record the code identifying a condition that has no evidence of prior forest, but does have evidence suggesting deliberate afforestation attempts (planted or prepared to promote tree establishment) to convert to forest the prior inventory cycle or prior to the last measurement. When collected: When SAMPLE KIND = 2 and CONDITION CLASS STATUS = 1 or 2 Field width: 1 digit Tolerance: No errors Values: 0 No 1 Yes

Item 5.8.1.6 TOTAL STEMS (CORE 2.5.36) [COND.NBR_LIVE_STEMS] Record TOTAL STEMS/acre when CURRENT AFFORESTATION CODE = 1 or PREVIOUS AFFORESTATION CODE = 1. When collected: CURRENT AFFORESTATION CODE = 1 or PREVIOUS AFFORESTATION CODE = 1 Field width: 5 digits Tolerance: 10% Values: 00000 - 99999 Chapter 5: CONDITION CLASS pg.108 SECTION 5.9 CONDITION OWNERSHIP This section describes the procedures used to associate detailed land ownership information with the conditions found on the plot. All landowners found to be associated with a plot during the offseason ownership process will be downloaded to the PDR. Every condition on a plot must be assigned to a landowner using the OWNER CONDITION LIST. Field crews will verify or update the LANDOWNER SHORTNAME, OWNERSHIP TYPE, OWNER CONDITION LIST and OWNER NOTES for every landowner on the plot. If a landowner of a condition is not downloaded to the PDR, create a new landowner record and update LANDOWNER SHORTNAME, OWNERSHIP TYPE, OWNER CONDITION LIST, and OWNER NOTES. If a landowner downloaded to the PDR is not present on a condition, do not delete the record or update LANDOWNER SHORTNAME; use OWNERSHIP TYPE to indicate the landowner is not present on the plot. Note: The data downloaded to the PDR includes additional landowner contact information (e.g., address) that can be updated if the information is found to be incorrect. These data items are not described in this manual. If it is found that this information is incorrect, an OWNER NOTE must be used to note that the information was updated.

Item 5.9.0.1 OWNER SHORT NAME (PACI, AFSL) [OWNER.OWNERID_SRS] This data item uniquely identifies the landowner and will be downloaded for every landowner assigned to the plot during the off season ownership process. It cannot be updated for downloaded landowners. If a new landowner is encountered on plot, create a new record; the OWNER SHORT NAME can be selected from a drop down list or typed in if the landowner is not present in the drop down list. When Collected: All landowners Field width: 10 Characters Tolerance: No errors Values: Letters and numbers

Item 5.9.0.2 OWNERSHIP TYPE (PACI, AFSL) [OWNER.OWNER_TYPE_CD] Record whether the ownership information corresponds to an ownership that owns part or all of the land on the plot or if the owner is associated with the plot for access purposes only. This code will be downloaded for all landowners and can be updated if it is found that the landowner does not own land present on one of the subplots. When Collected: All landowners Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Landowner owns land on one of the subplots 2 Landowner is associated with the plot for access purposes only

Item 5.9.0.3 OWNER CONDITION LIST (PACI, AFSL) [OWNER.CONDLIST_SRS] List all of the condition classes on which a landowner has land that falls on one of the subplots. A maximum of four conditions can be assigned to a landowner; if fewer than four conditions are associated with a landowner, complete the remainder of this field with zeros. Landowners must fall on a subplot. It is possible for multiple landowners to be assigned to the same condition (e.g., multiple private landowners within a condition that each own land that falls on a subplot). CONDITION OWNERSHIP

: When Collected: All landowners when OWNERSHIP TYPE = 1 Field width: 4 digits Tolerance: No errors Values: 1000 to 9876 Section 5.9 pg.109 Item 5.9.0.4 OWNER NOTES (PACI, AFSL) [OWNER.NOTES] Record any notes that might be useful for future contacts with the landowner, or if the downloaded contact information has been updated. This information will be added to the Ownership Database after the field season. When Collected: All landowners as necessary Field width: 255 Characters Tolerance: N/A Values: English language words, phrases and numbers Chapter 5: CONDITION CLASS pg.110 SECTION 5.10 NONSAMPLED CONDITION CLASS ATTRIBUTES Nonsampled land (CONDITION CLASS STATUS = 5) may be subdivided into condition classes that are based on differences in nonsampled reason. See Subsection 5.2.5, NONSAMPLED, Possibility of Forest, for information on plots that are entirely nonsampled. When encountering an area where CONDITION NONSAMPLED REASON (Item 5.10.0.1) is constant but attributes differ, record attributes that apply to the greater part of the area within the nonsampled condition class. Example: Subplot center is accessible forestland, but there is a hazardous area delineated on the subplot. RESERVED STATUS, OWNER GROUP, GROUND LAND CLASS, ESTIMATED NONSAMPLED LAND COVER TYPE, and NONSAMPLED FOREST TYPE will be recorded for the nonsampled condition. If there is an ownership boundary between two OWNER GROUPS on plot within the nonsampled area, the difference in OWNER GROUP is ignored and the OWNER GROUP is assigned based on the condition that covers more area on the subplot.

Item 5.10.0.1 CONDITION NONSAMPLED REASON (CORE 2.4.3) [COND.COND_NONSAMPLE_REASN_CD] For portions of plots that cannot be sampled (CONDITION CLASS STATUS = 5), record one of the following reasons. When collected: When CONDITION CLASS STATUS = 5 Field width: 2 digits Tolerance: No errors Values: Code Description 02 Denied access area – Any area within the sampled area of a plot to which access is denied by the legal owner, or to which an owner of the only reasonable route to the plot denies access. There are no minimum area or width requirements for a condition class delineated by denied access. Because a denied-access condition can become accessible in the future, it remains in the sample and is re-examined at the next occasion to determine if access is available. 03 Hazardous situation – Any area within the sampled area on plot that cannot be accessed because of a hazard or danger, for example cliffs, quarries, strip mines, illegal substance plantations, temporary high water, etc. Although the hazard is not likely to change over time, a hazardous condition remains in the sample and is re-examined at the next occasion to determine if the hazard is still present. There are no minimum size or width requirements for a condition class delineated by a hazardous condition. 06 Lost plot - Entire plot cannot be found. Used for the single condition that is required for this plot. Used only in conjunction with PLOT NONSAMPLED REASON code 06. Can be either generated by the data recorder or in the office. 08 Skipped visit - Entire plot skipped. Used for the single condition that is required for this plot. Applied at the time of processing and used only in conjunction with PLOT NONSAMPLED REASON code 08. 10 Other – This code is used whenever a plot or condition class is not sampled due to a reason other than one of the specific reasons listed. An electronic CONDITION CLASS NOTE is required to describe the situation

Item 5.10.0.2 PREVIOUS CONDITION NONSAMPLED REASON (PNW) [PREV_COND_PNWRS.COND_NONSAMPLE_REASN_CD] A downloaded value that may be updated if an error was made by the previous crew. If updated, record one NONSAMPLED CONDITION CLASS ATTRIBUTES NONSAMPLED CONDITION CLASS

: of the following reasons for portions of the plot which could not be sampled at the previous measurement (PREVIOUS CONDITION CLASS STATUS = 5). Note: PREVIOUS CONDITION NONSAMPLED REASON values have already been updated to current codes. When collected: When SAMPLE KIND = 2 and PREVIOUS CONDITION CLASS STATUS = 5 Field width: 2 digits Section 5.10 pg.111 Tolerance: No errors Values: see CONDITION NONSAMPLED REASON

Item 5.10.0.3 NONSAMPLED FOREST TYPE (PNW) [COND.FLDTYPCD_NON_SAMP_PNWRS] When the ESTIMATED NONSAMPLED LAND COVER TYPE appears to be forest land, further describe it by determining the forest type. When collected: When CONDITION CLASS STATUS = 5 Field width: 3 digits Tolerance: No errors Values:Item 5.7.1.9, FOREST TYPE (CORE 2.5.3)

SECTION 5.11 CONDITION CLASS NOTES

SUBSECTION 5.11.1 CONDITION CLASS NOTES

Item 5.11.1.1 PREVIOUS CONDITION CLASS NOTES (PNW) [PREV_COND_PNWRS.NOTES] Record any notes needed to clarify or explain changes to previous condition class data items or condition class mapping. If the current crew corrects any previous crew errors, an explanation describing why values were changed is required. Include what was determined to be wrong and describe, in detail, the reason the current crew knows a previous error was made. When collected: All plots when previous crew incorrectly recorded condition class variables and previous values were changed by current crew Field width: 2000 characters Tolerance: N/A Values: Single words and abbreviated sentences

Item 5.11.1.2 CONDITION CLASS NOTES (PNW) [COND.NOTES] Record any notes needed to clarify or explain a special situation in the particular condition class being defined. When collected: All plots, use when clarification is needed Field width: 2000 characters Tolerance: N/A Values: Single words and abbreviated sentences

Item 5.11.1.3 CHANGE MATRIX NOTES (PNW) [CHANGE_MATRIX_PNWRS.NOTES] Record any notes needed to explain physical or procedural change in CONDITION CLASS STATUS, RESERVED STATUS, and OWNER GROUP. Chapter 5: When collected: CONDITION CLASS STATUS RECONCILE CODE = 1 or 3, CONDITON CLASS STATUS PROCEDURAL CHANGE REASON CODE = 99, RESERVED STATUS RECONCILE CODE = 1 or 3, RESERVED STATUS PROCEDURAL CHANGE REASON CODE = 99, and OWNER GROUP RECONCILE CODE = 1 or 3, OWNER

GROUP PROCEDURAL CHANGE REASON CODE = 99. CONDITION CLASS Field width: 2000 characters Tolerance: N/A Values: Single words and abbreviated sentences pg.112 CONDITION CLASS NOTES : Section 5.11 pg.113 CHAPTER 6 SUBPLOT INFORMATION Each subplot is described by a series of area parameters relating to topographic features and existing cover type. These data also relate to the microplot, since the microplot is contained within the subplot perimeter. This information is used for a variety of topics, including: identifying potential limits to management (e.g., topography), and relating physical site features to forest composition and productivity.

SECTION 6.1 RECORDING SUBPLOT INFORMATION

SUBSECTION 6.1.1 SUBPLOT INFORMATION

Item 6.1.1.1 SUBPLOT NUMBER (CORE 3.1) [SUBPLOT.SUBP] Record the code corresponding to the number of the subplot. When Collected: All subplots Field width: 1 digit Tolerance: No errors Values: 1 Center subplot 2 North subplot 3 Southeast subplot 4 Southwest subplot

Item 6.1.1.2 PREVIOUS SUBPLOT MAPPING ERROR (PNW) [SUBPLOT.PREV_COND_MAP_ERROR_PNWRS] Record a code to indicate whether or not a previous mapping error exists on a subplot or if an error exists in PREVIOUS SUBPLOT CENTER CONDITION or PREVIOUS MICROPLOT CENTER CONDITION. If PREVIOUS SUBPLOT MAPPING ERROR = Y, a note must be entered in SUBPLOT NOTES explaining why the crew knows an error was made previously. When collected: SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: Code Description N No error on subplot Y Error on subplot

Item 6.1.1.3 SUBPLOT STATUS (CORE 3.2) [SUBPLOT.SUBP_STATUS_CD] Indicate whether or not this subplot currently has at least one accessible forest land condition class. In

situations where PLOT STATUS = 1 or 2 and subplot is denied access or hazardous, but obviously contains Chapter 6: no forest land, record SUBPLOT STATUS = 2. In cases where a subplot is access-denied or hazardous land use and has the possibility of forest, record SUBPLOT STATUS = 3. When collected: All subplots Field width: 1 digit

Tolerance: No errors SUBPLOT INFORMATION Values: Code Definition 1 Sampled – at least one accessible forest land condition present on subplot

2 Sampled – no accessible forest land condition present on subplot 3 Nonsampled – possibility of forest land 4 Sampled – QA crew only measured condition, boundary and some subplot level data. For use only on check plots (QA STATUS = 2 through 6). Not a legal entry on production plots (QA STATUS = 1 or 7). pg.114 Item 6.1.1.4 SUBPLOT NONSAMPLED REASON (CORE 3.3) [SUBPLOT.POINT_NONSAMPLE_REASN_CD] For entire subplots that cannot be sampled, record one of the following reasons. When collected: When SUBPLOT STATUS = 3 Field width: 2 digits Tolerance: No errors Values: Code Definition 02 Denied access area – Any area within the sampled area of a plot to which access is denied by the legal owner, or to which an owner of the only reasonable route to the plot denies access. There are no minimum area or width requirements for a condition class delineated by denied access. Because a denied-access condition can become accessible in the future, it remains in the sample and is re-examined at the next occasion to determine if access is available. 03 Hazardous situation – Any area within the sampled area on plot that cannot be accessed because of a hazard or danger, for example cliffs, quarries, strip mines, illegal substance plantations, temporary high water, etc. Although the hazard is not likely to change over time, a hazardous condition remains in the sample and is re-examined at the next occasion to determine if the hazard is still present. There are no minimum size or width requirements for a condition class delineated by a hazardous condition. 04 Time limitation – This code applies to full subplots that cannot be sampled due to a time restriction. This code is reserved for areas with limited access, and in situations where it is imperative for the crew to leave before the plot can be completed (e.g., scheduled helicopter rendezvous). Use of this code requires notification to the field supervisor. This code should not be used for an entire plot (use code 8 [skipped visit] when an entire plot is skipped; see Chapter 4, Plot Level Data). 06 Lost plot - Entire plot cannot be found. Used for the four subplots that are required for this plot. Used only in conjunction with PLOT NONSAMPLED REASON code 06. Can be either generated by the data recorder or in the office. 08 Skipped visit - Entire plot skipped. Used for the four subplots that are required for this plot. Applied at the time of processing and used only in conjunction with PLOT NONSAMPLED REASON code 08. 10 Other – This code is used whenever a plot or condition class is not sampled due to a reason other than one of the specific reasons already listed. An electronic SUBPLOT NOTE is required to describe the situation.

Item 6.1.1.5 NONFOREST SUBPLOT STATUS (CORE 3.4) [SUBPLOT.NF_SUBP_STATUS_CD] Record the code that describes the sampling status of the other-than-forest subplot, i.e., SUBPLOT STATUS = 2. In cases where subplot is denied access or hazardous, but obviously contains no nonforest land, i.e., subplot is either noncensus water or Census water, record NONFOREST SUBPLOT STATUS = 2. When collected: When NONFOREST SAMPLING STATUS = 1 and SUBPLOT STATUS = 2 Field width: 1 digit Tolerance: No errors Values: Code Description 1 Sampled - at least one accessible nonforest land condition present on the subplot.

RECORDING SUBPLOT INFORMATION 2 Sampled - no nonforest land condition present on subplot, i.e., subplot is : either census and/or noncensus water. 3 Nonsampled nonforest Section 6.1 pg.115 Item 6.1.1.6 NONFOREST SUBPLOT NONSAMPLED REASON (CORE 3.5) [SUBPLOT.NF_SUBP_NONSAMPLE_REASN_CD] For entire nonforest subplots that can not be sampled, record one of the following reasons. When collected: When NONFOREST SUBPLOT STATUS = 3 Field width: 2 digits Tolerance: No errors Values: Code Description 02 Denied access - A subplot to which access is denied by the legal owner, or to which an owner of the only reasonable route to the plot denies access. Because a denied-access subplot can become accessible in the future, it remains in the sample and is re-examined at the next occasion to determine if access is available. 03 Hazardous situation - A subplot that cannot be accessed because of a hazard or danger, for example cliffs, quarries, strip mines, illegal substance plantations, temporary high water, etc. Although the hazard is not likely to change over time, a hazardous condition remains in the sample and is re- examined at the next occasion to determine if the hazard is still present. 04 Time limitation – This code applies to full subplots that cannot be sampled due to a time restriction. This code is reserved for areas with limited access, and in situations where it is imperative for the crew to leave before the plot can be completed (e.g., scheduled helicopter rendezvous). Use of this code requires notification to the field supervisor 10 Other - This code is used whenever a subplot is not sampled due to a reason other than one of the specific reasons already listed. An electronic SUBPLOT NOTE is required to describe the situation.

Item 6.1.1.7 PREVIOUS SUBPLOT CENTER CONDITION (PNW) [SUBPLOT.PREV_SUBPCOND_PNWRS] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the CONDITION CLASS NUMBER of the condition class at the subplot center as it existed at the previous measurement. When collected: When SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 6.1.1.8 SUBPLOT CENTER CONDITION (CORE 3.6) [SUBPLOT.SUBPCOND] Record the CONDITION CLASS NUMBER of the condition class at the subplot center. Chapter 6: When collected: All subplots Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 6.1.1.9 SUBPLOT CONDITION LIST (CORE 3.11) SUBPLOT INFORMATION [SUBPLOT.CONDLIST] This is a listing of all condition classes located within the 24.0-foot radius around the subplot center.A maximum of four conditions is permitted at any individual subplot (a maximum of nine condition classes can be recorded on a plot. If a condition class has already been defined at a previously completed subplot, use the same condition class number whenever that condition is encountered. Define new condition classes as they are encountered. If more than one condition class is listed here, boundary data are required. If only one condition class is listed, this condition is automatically assigned to the subplot center and microplot center. If fewer than four condition classes occur on this subplot, complete the remainder of this field with zeros. For example, if condition 1 is the only condition class on a subplot, record 1000. When collected: All plots pg.116 Field width: 4 digits Tolerance: No errors Values:1000 to 9876

Item 6.1.1.10 MICROPLOT CENTER CONDITION (CORE 3.7) [SUBPLOT.MICRCOND] Record the CONDITION CLASS NUMBER of the condition class at the microplot center. When collected: All microplots Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 6.1.1.11 PREVIOUS MICROPLOT CENTER CONDITION (PNW) [SUBPLOT.PREV_MICRCOND] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the CONDITION CLASS NUMBER of the condition class at the microplot center as it existed at the previous measurement. When collected: SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: 1 to 9 RECORDING SUBPLOT INFORMATION : Section 6.1 pg.117 SUBSECTION 6.1.2 PHYSIOGRAPHIC CLASS INFORMATION

Item 6.1.2.1 SUBPLOT SLOPE (CORE 3.8) [SUBPLOT.SLOPE] Record the angle of slope across the 24.0-foot radius subplot to the nearest 1-percent. SUBPLOT SLOPE is determined by sighting the clinometer along a line parallel to the average incline (or decline) of each subplot. This angle is measured along the shortest pathway down slope before the drainage direction changes. To measure SUBPLOT SLOPE, Observer 1 should stand at the uphill edge of the subplot and sight Observer 2, who stands at the downhill edge of the subplot. Sight Observer 2 at the same height as the eye-level of Observer 1. Read the slope directly from the percentage scale of the clinometer: • If slope changes gradually across the subplot, record an average slope. • If slope changes across the subplot but the slope is predominantly of one direction, code the predominant slope percentage rather than the average. • If the subplot falls directly on or straddles a canyon bottom or narrow ridge top, code the average slope of the side hill(s). • If the subplot falls on a canyon bottom or on a narrow ridge top, but most of the area lies on one side hill, code the slope of the side hill where most of the area lies. When collected: All subplots with at least one accessible forest land condition class present on subplot (SUBPLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the subplot when nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) Field width: 3 digits Tolerance: +/- 10 percent Values: 000 to 155

Item 6.1.2.2 SUBPLOT ASPECT (CORE 3.9) [SUBPLOT.ASPECT] Record the aspect across the 24.0-foot radius subplot, to the nearest 1 degree. SUBPLOT ASPECT is determined along the direction of slope for land surfaces with at least 5- percent slope in a generally uniform direction. SUBPLOT ASPECT is measured with a hand compass along the same direction used to determine slope. • If aspect changes gradually across the subplot, record an average aspect. • If aspect changes across the subplot but the aspect is predominately of one direction, code the predominate direction rather than the average. • If the subplot falls on or straddles a canyon bottom or narrow ridge top, code the aspect of the ridge line or canyon bottom. • If the subplot falls on a canyon bottom or on a narrow ridge top, but most of the area lies on one side hill, code the aspect of the side hill.

When collected: All subplots with at least one accessible forest land conditionclass present on Chapter 6: subplot (SUBPLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the subplot when nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) Field width: 3 digits Tolerance: +/- 10 degrees Values: Code Definition SUBPLOT INFORMATION 000 no aspect, slope < 5- percent 001 1 degree 002 2 degrees ...... 360 360 degrees, due north pg.118 Item 6.1.2.3 SLOPE SHAPE (PACI) [SUBPLOT.SLOPE_SHAPE_PNWRS] Record the slope shape over the subplot under consideration.

When collected: All subplots with at least one accessible forest land condition class present on subplot (SUBPLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the subplot when nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) Field width: 2 digit Tolerance: No errors Values: Code Description 00 Flat 10 Concave 20 Convex

Item 6.1.2.4 SLOPE POSITION (PACI) [SUBPLOT.SLOPE_POSITION_PNWRS] Record the slope position over the subplot under consideration. To more accurately measure the moisture-related effects of topography on vegetation, two separate, calculated indices will be computed in the lab from data gathered in the field: 1.) an index of moisture demand and 2.) an index of moisture supply. For moisture demand, the aspect, slope and elevation at each plot is used to approximate annual moisture demand from “Potential Solar Beam Irradiation on Slopes” tables or equations (Frank and Lee 1966). Moisture supply is estimated from an additive, modified, topographic relative moisture index (TRMI; Parker 1982) constructed using slope shape, percent slope and slope position. Higher moisture supply values occur on footslopes, gentle slopes and/or sites exhibiting slope concavities. When collected: All subplots with at least one accessible forest land condition class present on subplot (SUBPLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the subplot when nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) Field width: 2 digit Tolerance: +/- one class for codes 10-30 Values: Code Description 00 No Slope 10 Uppershoulder 20 Midslope 30 Footslope RECORDING SUBPLOT INFORMATION

: 40 Valleybottom 50 Ridgetop Section 6.1 pg.119 Item 6.1.2.5 SNOW/WATER DEPTH (CORE 3.10) [SUBPLOT.WATERDEP] Record, to the nearest 0.1 foot, the average approximate depth of water or snow covering the 24.0-foot radius subplot at the time of data collection. This data item is used to indicate subplots where some data items (e.g., seedling count, total lengths) may be measured with less certainty because of conditions at the time of measurement. This item is intended for water/snow/ice which covers substantial portions of subplots. Record “00” for streams contained within their banks and not affecting any measurements. When collected: All subplots with at least one accessible forest land condition class present on subplot (SUBPLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the subplotwhen nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) Field width: 2 digits (x.y) Tolerance: +/- 0.5 feet Values: 0.0 to 9.9

Item 6.1.2.6 SUBPLOT NOTES (PNW) [SUBPLOT.NOTES] Record any notes needed to clarify or explain a special situation encountered on the subplot. When collected: All plots: as needed Field width: 2000 characters Tolerance: N/A Values: Single words and abbreviated sentences

SECTION 6.2 PIG DAMAGE Wild pigs were introduced to the Pacific Islands by humans centuries ago. They were farmed loosely and became wild on the islands. These animals have no non-human predators and have subsequently expanded their populations. These populations have caused a lot of destruction to forests and other vegetated habitats. The following are examples of wild pig damage that may be encountered: rooting (sometimes called grubbing) where pigs dig up the soil and vegetation, compacted trails, wallows in wet soils, and rubbing on trees and shrubs. Because of this problem crews will be assessing pig damage for each sampled condition on all subplots. Crews will record the percentage of the entire subplot (as viewed from above) that has noticeable pig damage to the ground and ground vegetation for each sampled condition. It is important that this value is always estimated as a percent of an entire subplot. Code the following data items as described.

Item 6.2.0.1 SUBPLOT NUMBER OF PIG DAMAGE (PACI) [SUBP_COND_ROOT_DIS_PNWRS.SUBP] Chapter 6: Record the code corresponding to the number of the subplot. When Collected: All subplots with at least one accessible forest land condition present on subplot (SUBPLOT PLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the

subplot when nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) SUBPLOT INFORMATION Field width: 1 digit Tolerance: No errors Values: 1 Center subplot 2 North subplot 3 Southeast subplot 4 Southwest subplot pg.120 Item 6.2.0.2 CONDITION CLASS NUMBER OF PIG DAMAGE (PACI) [SUBP_COND_ROOT_DIS_PNWRS.CONDID] Record the CONDITION CLASS NUMBER corresponding to the instance of pig damage. When collected: All subplots with at least one accessible forest land condition present on subplot (SUBPLOT PLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the subplot when nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 6.2.0.3 PERCENT OF PIG DAMAGE ON SUBPLOT (PACI) [SUBP_COND_ROOT_DIS_PNWRS.PIG_DAMAGE_PCT] Record the estimated percentage of area of the subplot covered by pig damage for each sampled condition class found on subplot. When collected: All subplots with at least one accessible forest land condition present on subplot (SUBPLOT PLOT STATUS = 1); or All subplots with at least one accessible nonforest condition class present on the subplot when nonforest is being sampled (NONFOREST SUBPLOT STATUS = 1) Field width: 3 digit Tolerance: +/- 10 percent Values: 000 to 100 PIG DAMAGE : Section 6.2 pg.121 CHAPTER 7 BOUNDARY REFERENCES

SECTION 7.1 GENERAL INSTRUCTIONS Boundary reference data are used to compute the area for the condition classes sampled on a plot and to remeasure plots. Record all boundaries between condition classes that occur within the sampled (fixed- radius) area on subplots and microplots. Boundaries outside sampled (fixed-radius) areas are not referenced. In addition to using the recording procedures described herein, sketch maps of condition class boundaries onto the pre-printed plot diagrams on the plot card, accurately representing the shape of each boundary as it is on the ground (boundary data recorded in the PDR should represent the condition class area, but may not accurately represent the shape).

SECTION 7.2 REFERENCE PROCEDURE Within the sampled area on each microplot and subplot, reference the approximate boundary of each condition class that differs from the condition class at the center. Trees selected on these fixed-radius plots are assigned to the actual condition in which they lie regardless of the recorded approximate boundary delineated. Boundary referencing is done by recording azimuths and distances from subplot or microplot center to the reference points (Figure 7.1 and Figure 7.2). Each boundary is marked by a maximum of three points –two where the boundary intersects the respective fixed-radius plot circumference, and one "corner" point between the two end points, if necessary. Only the corner point requires a distance, since the distance from the center to the circumference is always equal to the fixed plot radius. Chapter 7:

Figure 7.1: How to measure a straight boundary on a Figure 7.2: How to measure a boundary with a corner fixed-radius plot. on a fixed-radius plot.

Microplot boundaries are referenced to the microplot center. Note that the larger the fixed-radius plot, the BOUNDARY REFERENCES greater likelihood of a need for a boundary corner to record boundaries that are not straight lines. Refer to Section 5.1 and Section 5.3 for general condition class delineation guidelines. The following additional rules apply when referencing a boundary within a fixed-radius plot: 1. When a boundary between accessible forest land and nonforest land or between two contrasting accessible forest land condition classes is clearly marked, use that feature to define the boundary. Examples of clear demarcation are a fence line, plowed field edge, sharp ridge line, defined stem line, and water's edge along a stream course, ditch, or canal. 2. When a boundary between forest land and nonforest land is not clearly marked by an obvious feature, the boundary should follow the nonforest side of the stems of the trees at the forest edge. pg.122 3. When a boundary between two contrasting forest land condition classes is not clearly marked, map along the stems of the contrasting condition. When the boundary between two contrasting forest land condition classes is separated by a narrow linear inclusion (creek, fire line, narrow meadow, unimproved road), establish the boundary at the far edge of the inclusion relative to subplot center. 4. Although individual tolerances are specified for the azimuths and distances, in practice a crew will be considered ‘correct’ when the difference in areas as mapped by the original crew and by the QA crew is less than 10 percent of the fixed-radius plot area. This allows for slight variations in azimuths or distances due to the approximate nature of mapping procedures. 5. Small developed nonforest land conditions and Nonsampled conditions (see Section 5.4) that are too small to represent accurately given electronic mapping limitations (e.g. only one corner) are diagramed using a 'wedge.' On the plot card, draw them as they actually exist on the ground. Boundary reference data should then be collected to map a wedge that accurately represents the area of the condition on each fixed-radius plot on which it exists. The outer edge of the wedge shall face the direction of the actual location of the nonforest or nonsampled condition on each fixed- radius plot.

Figure 7.3: How to map subplot 1. Macroplot is not mapped in Pacific Islands

SUBSECTION 7.2.1 BOUNDARIES ON REMEASUREMENT PLOTS When a plot is remeasured, the crew will examine the boundaries referenced at last inventory and reassess the condition class delineating data items. If no change has occurred, the current crew will retain the boundary data that were recorded at last inventory. If a boundary has changed, a new boundary is present, a procedural change has altered the boundary, or the previous crew made an obvious error; record new or updated boundary data. See Section 5.6, CONDITION REMEASUREMENT for guidance on when to correct previous mapping error. Record the reason for the change in BOUNDARY CHANGE (Item 7.2.2.4). Delete boundaries that are no longer distinct. If in doubt about whether or not a boundary change has occurred, leave boundary as delineated at the previous inventory. REFERENCE PROCEDURE : Section 7.2 pg.123 SUBSECTION 7.2.2 BOUNDARY DATA Record the appropriate values for each boundary mapped on the subplot or microplot as follows:

Item 7.2.2.1 SUBPLOT NUMBER (CORE 4.2.1) [BOUNDARY.SUBP] Generated code corresponding to the number of the subplot. When collected: All boundaries Field width: 1 digit Tolerance: No errors Values: 1 Center subplot 2 North subplot 3 Southeast subplot 4 Southwest subplot

Item 7.2.2.2 PLOT TYPE (CORE 4.2.2) [BOUNDARY.SUBPTYP] Record the code to specify whether the boundary data are for a subplot or microplot. When collected: All boundaries Field width: 1 digit Tolerance: No errors Values: Code Plot Type Null No boundaries are recorded for the subplot 1 Subplot boundary 2 Microplot boundary

Item 7.2.2.3 PREVIOUS PLOT TYPE (PNW) [PREV_BOUNDARY_PNWRS.SUBPTYP] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the code to specify whether the boundary data were recorded for a subplot, or microplot. When collected: SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: Code Plot Type Null No boundaries are recorded for the subplot 1 Subplot boundary 2 Microplot boundary Chapter 7: Item 7.2.2.4 BOUNDARY CHANGE (CORE 4.2.3) [BOUNDARY.BNDCHG] Remeasurement (SAMPLE KIND = 2) locations only. Record the appropriate code to indicate the relationship between previously recorded and current boundary information.

When collected: When SAMPLE KIND = 2 BOUNDARY REFERENCES Field width: 1 digit Tolerance: No errors Values: 0 No change boundary is the same as indicated on plot map and/or data collected by a previous crew. 1 New boundary, or boundary data has been changed to reflect an actual on- the-ground physical change resulting in a difference from the boundaries recorded. 2 Boundary has been changed to correct an error from previous crew. 3 Boundary has been changed to reflect a change in variable definition. pg.124 Item 7.2.2.5 CONTRASTING CONDITION (CORE 4.2.4) [BOUNDARY.CONTRAST] Record the CONDITION CLASS NUMBER of the condition class that contrasts with the condition class located at the subplot center (for boundaries on the subplot) or at the microplot center (for boundaries on the microplot), i.e., the condition class present on the other side of the boundary line. When collected: All boundaries Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 7.2.2.6 PREVIOUS CONTRASTING CONDITION (PNW) [PREV_BOUNDARY_PNWRS.CONTRAST] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the CONDITION CLASS NUMBER of the condition class that contrasted with the condition class located at the subplot center at the previous measurement (for boundaries on the subplot or microplot), e.g., the condition class present on the other side of the boundary line. When collected: SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 7.2.2.7 LEFT AZIMUTH (CORE 4.2.5) [BOUNDARY.AZMLEFT] Record the azimuth from the subplot or microplot center to the farthest left point (facing the contrasting condition) where the boundary intersects the circumference. When collected: All boundaries Field width: 3 digits Tolerance: +/- 10 degrees Values: 001 to 360

Item 7.2.2.8 PREVIOUS LEFT AZIMUTH (PNW) [PREV_BOUNDARY_PNWRS.AZMLEFT] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the azimuth from the subplot or microplot center to the farthest left point (facing the contrasting condition class) where the boundary intersected the subplot or microplot circumference at the previous measurement. When collected: SAMPLE KIND = 2 Field width: 3 digits Tolerance: +/- 10 degrees Values: 001 to 360

Item 7.2.2.9 CORNER AZIMUTH (CORE 4.2.6) [BOUNDARY.AZMCORN] Record the azimuth from the subplot or microplotcenter to a corner or curve in a boundary. If a boundary is best described by a straight line between the two circumference points, then record 000 for CORNER AZIMUTH (000 = none). When collected: All boundaries Field width: 3 digits Tolerance: +/- 10 degrees

REFERENCE PROCEDURE Values: 000 to 360 : Section 7.2 pg.125 Item 7.2.2.10 PREVIOUS CORNER AZIMUTH (PNW) [PREV_BOUNDARY_PNWRS.AZMCORN] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the azimuth from the subplot or microplot center to a corner or curve in a boundary at the previous measurement. When collected: SAMPLE KIND = 2 Field width: 3 digits Tolerance: +/- 10 degrees Values: 000 to 360

Item 7.2.2.11 CORNER DISTANCE (CORE 4.2.7) [BOUNDARY.DISTCORN] Record the horizontal distance, to the nearest 1 foot, from the subplot or microplot center to a boundary corner point. When collected: All boundaries when CORNER AZIMUTH > 000 Field width: 3 digits Tolerance: +/- 1 foot Values:Plot Type Values for Corner Distance Microplot 001 to 007 feet (actual limiting distance is 6.8 feet) Subplot 001 to 024 feet

Item 7.2.2.12 PREVIOUS CORNER DISTANCE (PNW) [PREV_BOUNDARY_PNWRS.DISTCORN] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the horizontal distance as it should have been measured, to the nearest 1 foot, from the subplot or microplot center to a boundary corner point. When collected: SAMPLE KIND = 2 Field width: 3 digits Tolerance: +/- 1 foot Values:Plot Type Values for Corner Distance Microplot 001 to 007 feet (actual limiting distance is 6.8 feet) Subplot 001 to 024 feet

Item 7.2.2.13 RIGHT AZIMUTH (CORE 4.2.8) [BOUNDARY.AZMRIGHT] Record the azimuth from the subplot or microplot center to the farthest right point (facing the contrasting condition) where the boundary intersects the circumference. Chapter 7: When collected: All boundaries Field width: 3 digits Tolerance: +/- 10 degrees Values: 001 to 360

Item 7.2.2.14 PREVIOUS RIGHT AZIMUTH (PNW) BOUNDARY REFERENCES [PREV_BOUNDARY_PNWRS.AZMRIGHT] A downloaded value that may be updated if an error was made by the previous crew. If updated, record the azimuth from the subplot or microplot center to the farthest right point (facing the contrasting condition class) where the boundary intersected the subplot or microplot circumference at the previous measurement. When collected: SAMPLE KIND = 2 Field width: 3 digits Tolerance: +/- 10 degrees Values: 001 to 360 pg.126 Item 7.2.2.15 BOUNDARY NOTES (PNW) [BOUNDARY.NOTES] Record electronic BOUNDARY NOTES, if needed, to clarify or explain a special situation in the boundary being defined. When collected: As needed Field width: 2000 characters Tolerance: N/A Values: Single words and abbreviated sentences REFERENCE PROCEDURE : Section 7.2 pg.127 CHAPTER 8 TREE AND SAPLING DATA This chapter describes how and where to tally live trees, standing dead trees (snags), and saplings. Determining which measurements are required is based on tree size, tree status, condition class status, and regional location, as well as land ownership. Tree and sapling data yield information on tree volume, growth, mortality, and removals; wildlife habitats; forest structure and composition; biomass; and carbon sequestration. This chapter also describes how to record witness trees/stumps/objects. Witness information is recorded alongside the tree tally information (as witness trees and tally trees can be one in the same). Witness information assists the next field crew in relocating the center of a previously established plot/subplot.

SECTION 8.1 DEFINITIONS Trees meeting specific criteria for diameter at breast height (DBH), are included in the sample. General definitions are listed below, followed by a table containing specific requirements. Tree: An individual tree is categorized as a live tree, a standing dead tree (snag), or a sapling based on specific criteria listed in the table below. When the word “tree” is used in the field guide with no additional descriptors it applies to live trees, snags, and saplings. Applicable species are listed in Appendix B, Tree Species List. Live tree: Trees are alive if they have any living parts (leaves, buds, cambium) at or above the point of diameter measurement, either at DBH. Trees that have been temporarily defoliated are still alive. Uprooted trees with signs of life above the point of diameter are considered alive as long as some roots are still in substrate. Standing dead tree (snag): To qualify as a standing dead tally tree, dead trees must be at least 1.0 inch in diameter, have a bole which has an unbroken ACTUAL LENGTH of at least 4.5 feet, and lean less than 45 degrees from vertical as measured from the base of the tree to the point of diameter measurement. Dead standing tally trees, and partially separated boles of dead tally trees, do not have to be self-supported. They may be supported by other trees, branches, or their crown. Standing dead trees, recorded at the previous annual inventory, that shrink below minimum diameter and length requirements maintain dead tree status. Portions of boles on dead trees that are separated greater than 50 percent (either above or below 4.5 feet), are considered severed. Sapling: Trees ≥1.0 inch but <5.0 inches DBH that meet a minimum length requirement are tallied on the microplot. Tally trees: ‘Tally trees’ are defined as all live and standing dead trees in accessible forest land or measurable nonforest land condition classes encountered on the subplot the first time a subplot is established, and all trees that grow into a subplot thereafter. ‘Tally saplings’ are defined as all live and standing dead saplings encountered the first time a microplot is established, and all saplings that grow into each microplot thereafter and are included until they grow to 5.0 inches or larger, at which time they are tallied on the subplot and referenced (new AZIMUTH and HORIZONTAL DISTANCE taken) to the subplot center. Chapter 8: Diameter Length Live tree (DBH species) ≥ 5.0 inches DBH ≥4.5 feet in length with living parts at or above DBH Standing dead tree (DBH ≥1.0 inches DBH ≥ 4.5 feet in length (leaning less than 45

species) degrees from vertical) TREE AND SAPLING DATA Sapling (DBH species) 1.0 inch to 4.9 inches DBH ≥4.5 feet in length with living parts at or above DBH

SECTION 8.2 SELECTING TALLY TREES

SUBSECTION 8.2.1 WHERE TO TALLY Determining whether a tree qualifies as a "tally tree" depends upon a combination of the following: • STATE • OWNER CLASS • ADMINISTRATIVE FOREST CODE pg.128 • CONDITION CLASS STATUS • TREE SPECIES (must be listed on the Tree Species List found in Appendix B) • DIAMETER (DBH) of the tree • TREE STATUS • TREE LENGTH • HORIZONTAL DISTANCE from the fixed-radius plot center Trees on the subplot, and microplot are tallied according to the following rules. If a tree is located in an area that does not meet the criteria below, it is not a tally tree. Table 8.1:Where to tally trees in the Pacific Islands PACIFIC ISLANDS CONDITION CLASS OWNERSHIP All lands in the Pacific Islands except Non-experimental forest lands in TYPE Hawaii; all experimental forest lands Hawaii in Hawaii TREES ARE TALLIED IN Accessible forest land and nonforest Accessible forest land condition land condition classes [CONDITION classes [CONDITION CLASS CLASS STATUS = 1 or STATUS = 1] NONFOREST CONDITION CLASS STATUS = 2] MICROPLOT (6.8 - foot radius) All live and dead saplings (1.0 inches to 4.9 inches DBH) on the microplot are tallied and referenced to the microplot center SUBPLOT (24.0 - foot radius) All live trees and snags ≥5.0 inches DBH on the subplot are tallied and referenced to the subplot center

SUBSECTION 8.2.2 WITHIN PLOT AREA CRITERIA Trees and saplings are selected for tally (measurement) only when the HORIZONTAL DISTANCE from the microplot/subplot center to the bole center at the ground is less than or equal to the radius of that microplot/ subplot. Trees must be selected for tally within the appropriate fixed-radius area without error. The tolerances for HORIZONTAL DISTANCE to trees (Item 8.4.1.14) do not apply when determining whether a tree is tallied within the specified plot area.

Figure 8.1: Horizontal distance from plot center criteria for determining tally trees. SELECTING TALLY TREES SELECTING TALLY : Section 8.2 pg.129 SECTION 8.3 CONDUCTING THE TREE TALLY Begin tallying trees at an azimuth of 001 degrees from subplot center and continue clockwise around the subplot. Work outward from subplot center to subplot perimeter. Repeat this sequence for trees on the microplot. Select, record, and tag subplot witness trees/stumps/objects while recording tree tracking data on the subplot.

SUBSECTION 8.3.1 SUBPLOT WITNESS TREES/OBJECTS Each of the four subplot center stakes or metal pins should be referenced by a minimum of two subplot witness trees/objects. Use the following procedures to select and record witnesses. Refer to Table 3.2: Standards for monumentation of various witness types, for specific monumentation guidelines. A. Selecting witnesses: Select two trees/objects near the subplot center which form, as closely as possible, a right angle with the center marker. Trees within six feet of the subplot center are preferable. If live trees are not available, use sound snags, stumps, or objects. On subplots established previously, reuse the previous witness trees, unless better trees are available. B. Monumenting witnesses: Monumentation procedures vary depending on the subplot being witnessed; plot center (PC, center of subplot 1) has different monumentation than subplots 2 through 4. Refer to Table 3.2: Standards for monumentation of various witness types, for specific monumentation guidelines. C. Recording witness data (all subplots on the standard layout): Identify witness trees/snags/stumps/ objects in the data recorder (PDR) using the procedures listed below: • Tally tree/snag (a trackable tree record): Record SUBPLOT TALLY TREE WITNESS FLAG = Y (Item 8.4.1.9) to mark tally trees/snags as witnesses. • Non-tally tree/snag: Enter a new record for the tree/snag; record PRESENT TREE STATUS = 8, witness non-tally tree (Item 8.4.1.8). • Stump: Enter a new record for the stump; record PRESENT TREE STATUS = 7, witness stump (Item 8.4.1.8). Note: When recording stumps as witnesses, use the guidelines listed in Subsection 8.5.2 (Diameter on Stumps) to measure diameter. • Shrub or object: Enter a new record for the shrub or object; record PRESENT TREE STATUS = 9, witness-only object (Item 8.4.1.8). Note: Record the shrub species name, diameter, and location of diameter measurement in TREE NOTES (Item 8.10.1.1). In addition, record the following information for each witness: • SPECIES - If applicable (Item 8.4.1.12) • AZIMUTH - Subplot center to tree (Item 8.4.1.13) • SLOPE DISTANCE TO WITNESS TREE OR OBJECT - From the subplot stake/pin where it enters the ground to the head of the top nail affixing the basal tag or tree number tag (Item 8.4.1.2) • DIAMETER (Item 8.5.3.2)

Note: For witnesses, distance is always recorded as a slope distance from the subplot center to the tag Chapter 8: at the base of the tree, rather than as a horizontal distance to the center of the tree collected for tally trees.

SUBSECTION 8.3.2 SUBPLOTS/CONDITIONS WITHOUT TALLY TREES

This subsection provides information about recording tree data on subplots with special circumstances. TREE AND SAPLING DATA • If all accessible forest condition classes within subplot 1 have no tally trees present, two records are required to witness subplot center. These witness records can represent sound stumps or snags, but live trees are preferable. • If the plot is entirely nonforest and it was ground visited, record two witness records for subplot 1. • If the plot is entirely nonforest and it is measurable nonforest, record two witness records for each subplot. pg.130 SECTION 8.4 TREE TRACKING

SUBSECTION 8.4.1 TREE TRACKING DATA ITEMS

Item 8.4.1.1 SUBPLOT NUMBER (CORE 5.1) [TREE.SUBP] A 1-digit code, generated for each tree record entered into the PDR, regardless of the status of the tree record (live tree, snag, witness-only tree, etc.). When Collected: All tree records Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Center subplot 2 North subplot 3 Southeast subplot 4 Southwest subplot

Item 8.4.1.2 TREE RECORD NUMBER (CORE 5.2) [TREE.TREE] A 3-digit code, assigned by the PDR, to uniquely and permanently identify each tree on a given subplot. At the time of remeasurement (SAMPLE KIND = 2), TREE RECORD NUMBERs will be downloaded for previously recorded trees, snags, and witness-only records. TREE RECORD NUMBERS cannot be changed by the field crew. When Collected: All tree records Field width: 3 digits Tolerance: No errors Values: 001 to 999

Item 8.4.1.3 TREE TAG NUMBER (PACI, PFSL) [TREE.TAG_NO_PNWRS] Affix an aluminum tree number tag and record a TREE TAG NUMBER for all tally trees ≥1.0 inch DBH (except witness-only trees) sampled at the current inventory; this includes trees recorded, but not tagged, during a previous visit (e.g., saplings and snags). Number trees in a clockwise order from AZIMUTH 001 to 360, and work outwards from subplot center to subplot perimeter. Repeat this sequence for saplings on the microplot. Attempt to keep tree numbers in order. However, do not renumber all trees on a microplot/ subplot in order to assign a more “correct” tree number to a missed tree. Saplings <3.0 inches DBH: Wire the tag to an ancillary branch. Saplings ≥3.0 inches DBH: Nail the tag below stump height and facing microplot center. Trees ≥5.0 inches DBH: Nail the tag below stump height and facing subplot center. • Live trees: Drive the nail in only as far as is necessary to firmly anchor it in the wood. If a tree which requires a TREE TAG NUMBER has a PNW-FIA tag from a previous inventory, reuse the old tag, if serviceable, or attach a new tag. When replacing an old PNW-FIA tag, discard it. If an old tag cannot be removed, pound it in until flush with the bark so it will be overgrown and will not be confused with the new tag. • Standing dead trees: Pound the nail flush with the bole on all standing dead trees; including previously live trees, which are now dead. Do not use a TREE TAG NUMBER more than once on a plot. Before leaving the vehicle, make sure the tree numbers previously assigned to downloaded trees are different than numbers on the new tags you may TREE TRACKING TREE

: use. Special Note for Hawaii only: Lands owned by the Division of Forestry and Wildlife (DOFAW) – Do not affix any tags or nails below 6.0 ft. Affix the tree number tag number to the upper dbh nail that will be located at 6.0 feet or higher. Section 8.4 pg.131

When collected: When PRESENT TREE STATUS = 1; or when PRESENT TREE STATUS = 2 and STANDING DEAD = 1 Field width: 3 digits Tolerance: No errors Values: 001 to 999

Item 8.4.1.4 PREVIOUS TREE TAG NUMBER (PACI, PFSL) [TREE.PREV_TAG_NO_PNWRS] If any tree tallied at the current inventory has a tree number tag from a previous R6 CVS plot, R5 inventory plot, or PNW-FIA plot, record the tag number. This item is recorded for live trees, dead trees, and saplings, and will help link current data to previously collected data. If more than one old tree number tag is present, record the one from the most recent inventory. If more than one old tree number tag is present and a tag is reused: • On remeasurement plots (SAMPLE KIND = 2): Record the TREE TAG NUMBER from the previous annual visit for the “current” TREE TAG NUMBER and also for PREVIOUS TREE TAG NUMBER. When collected: When SAMPLE KIND = 2 Field width: 3 digits Tolerance: No errors Values: 001 to 999

Item 8.4.1.5 CONDITION CLASS NUMBER (CORE 5.3) [TREE.CONDID] Record the CONDITION CLASS NUMBER in which each tree is located. Often, a referenced boundary is approximate, and trees selected for tally are assigned to the actual condition in which they lie regardless of the recorded approximate boundary (Figure 8.2). Trees must be assigned to a condition present on the subplot condition list. On remeasurement plots (SAMPLE KIND = 2), the previous CONDITION CLASS NUMBER is downloaded and displayed on the PDR for each remeasurement tree. If necessary, change the CONDITION CLASS NUMBER to reflect current condition classes and boundaries. When Collected: All trees Field width: 1 digit Tolerance: No errors Values: 1 to 9 Chapter 8: TREE AND SAPLING DATA

Figure 8.2: Ragged condition class boundary and tree condition class designation pg.132 Item 8.4.1.6 PREVIOUS CONDITION CLASS NUMBER (PNW) [TREE.PREVCOND] A downloaded value that may be updated if an error was made by the previous crew. Only edit and change PREVIOUS CONDITION CLASS NUMBER if the previous crew made a mistake. The data recorder will automatically update the PREVIOUS CONDITION CLASS NUMBER if none of the previous boundaries have changed. If any of the previous boundaries have been changed, the current crew is required to assign the previously tallied trees to a corrected PREVIOUS CONDITION CLASS NUMBER. When Collected: SAMPLE KIND = 2 Field width: 1 digit Tolerance: No errors Values: 1 to 9

Item 8.4.1.7 PREVIOUS TREE STATUS (CORE 5.6) [TREE.PREV_STATUS_CD] A downloaded code for all trees tallied at the previous inventory. This code is used to track the status of sample trees over time; correct even if the tree no longer qualifies as a tally tree. Add PREVIOUS TREE STATUS if null and tree was not tallied at the previous inventory because of a definition or procedural change (RECONCILE = 10). When Collected: On remeasurement plots (SAMPLE KIND = 2), all previously tallied trees ≥1.0 inch DBH and witness objects. Update when null and RECONCILE = 10. Field width: 1 digit Tolerance: No errors Values: Code Description 1 Live Tree – alive at the previous inventory 2 Dead tree – standing dead tree at the previous inventory 8 Witness Non-Tally Tree – A non-tally live or dead tree that is used for a subplot witness. 9 Witness-Only – A subplot witness that is not a tree. It may be a shrub, rock or other.

Item 8.4.1.8 PRESENT TREE STATUS (CORE 5.7) [TREE.STATUSCD_PNWRS; Trees with regional status codes 7, 8, or 9 will loaded in NON_TALLY_TREE_PNWRS] Record a PRESENT TREE STATUS for each tallied tree; this code is used to track the status of sample trees over time: as they first appear, as ingrowth, as they survive, and when they die or are removed. Witness-only trees/stumps/objects are also assigned a PRESENT TREE STATUS. When collected: All live and standing dead tally trees ≥ 1.0 inch DBH and witness non-tally trees, witness stumps, and witness-only objects Field width: 1 digit Tolerance: No errors Values: Code Tree Status Description 0 No Status Remeasurement plots only.Tree is not presently in the sample. Tree was incorrectly tallied at the previous inventory or currently is not tallied due to definition or procedural change, or is not tallied due to natural causes (e.g., moved beyond the radius of the plot by small earth movement, hurricane, etc). Requires RECONCILE code = 5-9 1 Live Tree Any live tree (new, remeasured or ingrowth) TREE TRACKING TREE : Section 8.4 pg.133 2 Dead Tree Any dead tree (new, remeasured or ingrowth) regardless of cause of death. Includes all previously standing dead trees that no longer qualify as standing dead, trees killed by silvicultural or land clearing activity and assumed not to have been utilized, as well as dead trees that may have been present at the time of plot establishment but only tallied now due to procedural change. Includes: previously dead standing, now down, and previously dead standing that no longer meet diameter and length requirements. 3 Removed Remeasurement plots only. A tree that has been cut or removed by direct human activity related to harvesting, silvicultural activity or land clearing. The tree is assumed to have been utilized. 7 Witness Stump A subplot witness that is a stump*

8 Witness Non- A non-tally live or dead tree that is to be used for a Tally Tree subplot witness 9 Witness-Only A subplot witness that is not a tree. It may be a shrub, Object rock, or other; TREE NOTES are required to describe the witness.

Item 8.4.1.9 SUBPLOT TALLY TREE WITNESS (PNW) [TREE.SUBP_WITNESS_FLAG_PNWRS] Use this data item to mark the current tally tree (live or dead) as a witness. See Subsection 3.3.2, Witness Trees/Objects, for witness monumentation instructions. Note: The default for this item is “N”; update the field to “Y” to record a witness. When collected: When PRESENT TREE STATUS = 1; or when PRESENT TREE STATUS = 2 and STANDING DEAD = 1 Field width: 1 digit Tolerance: No errors Values: Code Description N current record is not a tally tree witness Y current record is a tally tree witness

Item 8.4.1.10 STANDING DEAD (CORE 5.7.2) [TREE.STANDING_DEAD_CD] Record the code that describes whether or not a tree qualifies as standing dead. Standing dead trees must be at least 1.0 inch in diameter, have a bole that has an unbroken ACTUAL LENGTH of at least 4.5 feet, and lean less than 45 degrees from vertical as measured from the base of the tree to 4.5 feet. See Figure 8.3 through Figure 8.5. Chapter 8: “Unbroken” is defined as at least 50 percent attached to the original source of growth. The degree of lean on dead trees with partially separated (i.e., 1 to 50 percent) boles is measured from the base of the tree to the top of ACTUAL LENGTH. Portions of boles on dead trees that are separated greater than 50 percent (either above or below 4.5 feet), are considered severed and are not included in any tree measurements. TREE AND SAPLING DATA Live and dead standing tally trees, and partially separated boles of dead tally trees, do not have to be self- supported. They may be supported by other trees, branches, or their crown. pg.134

Figure 8.3: Example of an unbroken bole to 4.5 feet Figure 8.4: Example of an unbroken bole of <1.5 feet

Trees are at least 1.0 inches at 4.5 ft and are at least 4.5 ft in unbroken ACTUAL LENGTH

Figure 8.5: Other examples of dead trees

When Collected: All dead tally trees (PRESENT TREE STATUS = 2) Field width: 1 digit Tolerance: No errors Values: Code Description 0 No – tree does not qualify as standing dead 1 Yes – tree does qualify as standing dead

TREE TRACKING TREE Item 8.4.1.11 RECONCILE (CORE 5.7.1) : [TREE.RECONCILECD] For remeasurement locations only (SAMPLE KIND = 2), record a RECONCILE code for any new tally tree that was not tallied in the previous inventory, and for all no status remeasurement trees (PRESENT TREE STATUS = 0). This code is used to identify the reason a new tree appeared in the inventory, and identify the reason a remeasurement tree no longer qualifies as a tally tree. Section 8.4 pg.135 Code 5 is used to indicate live trees that shrink below the diameter threshold on the microplot/subplot. For example, if a live remeasurement tree shrinks below the 5.0 inch DBH, then record the following combination of codes: PREVIOUS TREE STATUS = 1, PRESENT TREE STATUS = 0, RECONCILE = 5. If a live measured tree shrinks below the 5.0 inch threshold on the subplot and is currently greater than or equal to 1.0 inch on the microplot, then record PREVIOUS TREE STATUS = 1, PRESENT TREE STATUS = 1. Record all required items for a tally sapling. Use the TREE CODING GUIDE in Appendix C to determine the national coding method for remeasurement trees. When collected: When SAMPLE KIND = 2 all new live and standing dead tally trees and saplings ≥1.0 inch DBH (PRESENT TREE STATUS = 1 or 2 and no PREVIOUS TREE STATUS); and all no status trees (PRESENT TREE STATUS = 0) Field width: 2 digit Tolerance: No errors Values: Code Definition Codes 1 - 4 are 1 Ingrowth Either a new tally tree not qualifying as through growth or a valid for new new tree on land that was formerly nonforest and now qualifies trees on the as forest land (includes reversion or encroachment). plot: 2 Through New tally tree 5.0 inches DBH and larger, within the microplot, growth which was not missed at the previous inventory. 3 Missed live A live tree missed at previous inventory and that is live or dead now. Includes currently tallied trees on previously nonsampled conditions. 4 Missed dead A dead tree missed at previous inventory that is dead now. Includes currently tallied trees on previously nonsampled conditions. Codes 5 - 9 are 5 Shrank Live tree that shrank below threshold diameter on microplot/ valid for subplot. remeasured 6 Moved Tree was correctly tallied in previous inventory, but has now trees that no moved beyond the radius of the plot due to natural causes longer qualify (e.g., small earth movement, hurricane). Tree must be either as tally: live before and still alive now or dead before and dead now. If tree was live before and now dead, this is a mortality tree and should have PRESENT TREE STATUS = 2 (not 0). 7 Cruiser error Erroneously tallied at previous inventory. 8 Procedural Tree was tallied at the previous inventory, but is no longer change tallied because of a definition or procedural change. 9 Sampled Tree was sampled before, but now the area where the tree was before located is nonsampled. All trees on the nonsampled area have RECONCILE = 9. The following table, which is an abbreviated list from Appendix C, describes how to tally standing dead saplings with respective PRESENT TREE STATUS, RECONCILE CODE, and STANDING DEAD, which are being collected for the first time in Field Guide version 7.0: Chapter 8: PRESENT TREE RECONCILE STANDING CAUSE of Dead Sapling Tally – New plots STATUS CODE DEAD DEATH Standing dead 1.0 – 4.9 DBH 2 Null Auto-populated Core optional TREE AND SAPLING DATA pg.136

Dead Sapling Tally – Remeasure PRESENT TREE RECONCILE STANDING CAUSE of plots STATUS CODE DEAD DEATH Previous live <1.0 and has grown to 2 1 1 10-80 ≥1.0 and died Previous live 1.0+; now standing dead 2 Null 1 10-80 5.0+ DBH Previous ≥ 1 inch and <5 inches and 2 4 1 Null was dead and is still standing dead Previous live 1+ missed; now 1+ DBH 2 3 1 10-80 and dead Previous live 5.0+ DBH; now tree 2 Null 0 10-80 shrank <5.0 but ≥1.0 (e.g., bark loss) and is standing dead, located on subplot (not located on microplot). Previous dead 5.0+ DBH; now tree 2 Null 0 Null shrank <5.0 but ≥1.0 (e.g., bark loss) and is standing dead, located on subplot (not located on microplot). Previous live 5.0+ DBH; now tree 2 Null 1 10-80 shrank <5.0 but ≥1.0 (e.g., bark loss) and is standing dead located on the microplot. Note: this dead sapling should be referenced with a new distance and azimuth from the microplot center. Previous dead 5.0+ DBH; now tree 2 Null 1 Null shrank <5.0 but ≥1.0 (e.g., bark loss) and is standing dead located on the microplot. Note: this dead sapling should be referenced with a new distance and azimuth from the microplot center.

Item 8.4.1.12 SPECIES (CORE 5.8) [TREE.SPCD; TREE.PREV_SPCD_PNWRS] Record the SPECIES code from the Tree Species List in Appendix B. If a species is encountered that is not listed in Appendix B, it should not be tallied. If the species cannot be determined in the field, tally the tree, but bring branch samples, foliage, cones, flowers, bark, etc. to the office for identification. If possible, collect samples outside the subplots from similar specimens and make a note to correct the SPECIES code later. Genus-only codes should only be used when you are sure the species is on the species list, but you cannot differentiate among acceptable species. In the case of standing dead trees on newly established plots use the sample collections procedures described earlier in this paragraph. Note: The Tree Species List appendix contains all tree species designated as “Core” on the national list and all additional species tallied in PNW during the current inventory. In the Pacific Islands, 0299 (unknown dead tree, conifer) and 0998 (unknown dead tree, hardwood) are only valid for dead trees. Code 999 is valid for live trees and is the only unknown code that can be used for unknown live trees, softwood or hardwood. On remeasurement plots (SAMPLE KIND = 2), previous SPECIES information will be downloaded and displayed in the current SPECIES field in the PDR for each remeasurement tree. Correct the SPECIES code if the SPECIES was incorrectly identified, even if the tree is no longer a valid tally tree (PRESENT TREE STATUS = 0). TREE TRACKING TREE : When Collected: All trees (PRESENT TREE STATUS = 0-8) Field width: 4 digits Tolerance: No errors Values: See Appendix B Section 8.4 pg.137 Item 8.4.1.13 AZIMUTH (CORE 5.4) [TREE.AZIMUTH; TREE.PREV_AZM_PNWRS] Sight the AZIMUTH from the subplot center (for trees ≥ 5.0 inches DBH) or the microplot center (for trees ≥ 1.0 inch and < 5.0 inches DBH to the center of the base of the tree. Record AZIMUTH to the nearest degree. Use 360 for north. • Use the magnetic declinations shown in Appendix A, Reference Information. • When prop or buttressed roots are present, sight the azimuth to the center of the tree at the top of the root collar. • For Witness-Only Objects, use TREE NOTES to record the location on the object where the azimuth was sighted. On remeasurement plots (SAMPLE KIND = 2), previous AZIMUTH will be downloaded into the current AZIMUTH field. The current crew is responsible for verifying downloaded data and updating when it is out of tolerance. • For saplings on the microplot that become trees (at the time of plot remeasurement), crews must collect new AZIMUTH information from the subplot center. For trees on the subplot that shrink to become saplings on the microplot at remeasurement, crews must collect new AZIMUTH from the microplot center.

Figure 8.6: Where to measure AZIMUTH and HORIZONTAL DISTANCE when the main tree bole goes below the duff layer and reemerges Chapter 8: Measure DISTANCE & AZIMUTH to the point where the pith intersects the ground TREE AND SAPLING DATA

Figure 8.7: Pistol butt on sloped ground Figure 8.8: Krummholz situation Figure 8.9: Pistol butt on flat ground pg.138 When Collected: All live and standing dead tally trees ≥ 1.0 inch DBH and witness-only trees/stumps/ objects. When SAMPLE KIND = 2, downloaded previous AZIMUTH must be verified. Field width: 3 digits Tolerance: Tally trees: +/- 10 degrees Witness-only trees/stumps/objects: +/- 4 degrees Values: 001 to 360

Item 8.4.1.14 HORIZONTAL DISTANCE (CORE 5.5) [TREE.DIST; TREE.PREV_HORIZ_DIST_PNWRS] Record the measured HORIZONTAL DISTANCE, to the nearest 0.1 foot, from the subplot center (for trees ≥ 5.0 inches DBH) or microplot center (for trees ≥ 1.0 inch and < 5.0 inches DBH. If the tree has prop or buttressed roots, measure the horizontal distance to the pith of the tree at the top of the root collar. On remeasurement plots (SAMPLE KIND = 2), previous HORIZONTAL DISTANCE will be downloaded into the current HORIZONTAL DISTANCE field. The current crew is responsible for verifying downloaded data and updating when it is out of tolerance. There is no tolerance for added or missed trees regardless of the previous crew's downloaded data. • For saplings on the microplot that become trees (at the time of plot remeasurement), crews must collect new HORIZONTAL DISTANCE information from the subplot center. For live trees on the subplot that shrink to become saplings on the microplot at remeasurement, crews must collect new HORIZONTAL DISTANCE from the microplot center. When Collected: All live and standing dead tally trees ≥ 1.0 inch DBH. When SAMPLE KIND = 2, downloaded previous HORIZONTAL DISTANCE must be verified. Field width: 3 digits (xx.y) Tolerance: Microplot: +/- 0.2 feet Subplot: +/- 1.0 ft from 0.1 to 23.0 ft Subplot: +/- 0.2 ft from 23.1 to 24.0 ft Values: Microplot: 00.1 to 06.8 Subplot: 00.1 to 24.0

Item 8.4.1.15 SLOPE DISTANCE TO WITNESS TREE OR OBJECT (PNW) [TREE.SLOPE_DIST_TO_WITNESS_PNWRS] Record the SLOPE DISTANCE, to the nearest 0.1 foot, from the base of the subplot center pin, to the head of the nail that affixes the TREE TAG NUMBER/basal tag or other witness object. If more than one nail is used to affix the basal tag, measure to the head of the top nail. If a basal tag cannot be attached to the witness object, or if in national parks or lands owned by the Department of Fish and Wildlife in Hawaii (DOFAW), where TREE TAG NUMBER/basal tags cannot be used, measure from the base of the subplot to the front of the tree/object at the base. On remeasurement plots (SAMPLE KIND = 2), previous SLOPE DISTANCE will be downloaded into the current SLOPE DISTANCE field. The current crew is responsible for verifying downloaded data and updating when it is out of tolerance. Note: when recording a horizontal distance for the slope distance you must add a tree note. When Collected: All witness trees, stumps, or objects (PRESENT TREE STATUS = 1 or 2 and SUBPLOT TALLY TREE WITNESS FLAG = Y; or PRESENT TREE STATUS = 7, 8, or 9). When SAMPLE KIND = 2: previous SLOPE DISTANCE must be verified. Field width: 4 digits (xxx.y) Tolerance: +/- 0.2 feet Values: 00.1 to 99.9

DIAMETER SECTION 8.5 DIAMETER : Diameters are measured at breast height (DBH) . Trees with diameters between 1.0- and 4.9-inches are measured on the 6.8-foot radius microplot, those with diameters of 5.0-inches and larger are measured on the 24-foot radius subplots. Section 8.5 pg.139 Diameters are used in calculating volume, growth, average stand diameter, and stocking-related estimates such as forest type and stand size. Unless one of the special situations listed in Subsection 8.5.3 is encountered, measure DBH at 4.5 feet above the ground line on the uphill side of the tree.

SUBSECTION 8.5.1 MARKING CURRENT DIAMETER Special Note for Hawaii Only: For plots found on Lands owned by the Division of Forestry and Wildlife (DOFAW) there should be no nails in trees below 6.0 feet. Use the following procedures: 1. Marking saplings < 3.0 inches DBH: • Mark location of diameter measurement with a grease pencil.. 2. Marking live trees ≥ 3.0 inches DBH, or snags ≥ 3.0 inches DBH, tallied for the first time: • Set an aluminum nail at the point of diameter measurement. Place the nail on the side of the tree facing subplot/microplot center. On steep slopes, where placing the nail towards subplot/microplot center is not possible, place the nail on the uphill side of the bole. The nail should be driven in only as far as is necessary to firmly anchor it in the wood. • Use caution to avoid damaging trees. 3. Additional instructions for marking diameter on trees ≥ 32.0 inches: If a live tree or snag (new or remeasured) is 32.0 inches DBH or larger, affix an additional nail, and for every additional 12 inches of diameter add another nail, distributing the nails evenly around the circumference of the bole (e.g., a 44.3 inch tree would have three nails around the circumference of the tree at DBH – ideally, one on the uphill side of the tree and the other two about 1/3 of the way around the tree on each side). Set these nails while the diameter tape is wrapped around the tree at the point of diameter. 4. Marking DBH on trees previously marked: The DBH location on previously tallied trees ≥ 3.0 inches was marked with an aluminum nail. Remeasure diameter at the location of the previous crew’s nail if appropriate using the rules below: • For live trees: Reset the old nail enough so that as much of the old nail is exposed as possible. If the old nail cannot be pulled out to meet this requirement, set a new nail at the same location. • For dead trees: Pound the nail flush with the bole. • For live and dead trees: If the previous location is no longer accessible (e.g., covered by a landslide), there is an abnormality at the PREVIOUS DIAMETER measurement point, or it is more than 12 inches away from where the diameter should be measured according to current protocols (either because protocols have changed or the previous crew made a mistake) move the point of measurement and the nail, and assign a DIAMETER CHECK code of “2”. • If the point of DBH measurement is being moved (on live or dead trees), follow the instructions Chapter 8: outlined in Item 8.5.3.1, PREVIOUS DIAMETER AT BREAST HEIGHT (CORE 5.9.1) to estimate a new PREVIOUS DIAMETER AT BREAST HEIGHT. • If the old nail marks a point of diameter measurement not used at the current inventory, remove it if possible; otherwise pound it in flush with the tree. • If the previous nail falls within the range of tolerance outlined above, do not pull it out of the tree just

because it is not facing the subplot center. Keep original placement of nails at all times unless there TREE AND SAPLING DATA is an obvious error. 5. The following apply at remeasurement: • If at the previous visit a forked tree was recorded as two separate trees but should have been recorded as one tree, reconcile one tree and correct the diameter for the remaining tree. Give one of the tree data lines a PRESENT TREE STATUS = 0, RECONCILE = 7, and a TREE NOTE (remove the D.B.H. nail). The remaining tree data line receives PRESENT TREE STATUS = 1 or 2 with DIAMETER CHECK = 2, and a TREE NOTE. Correct the PREVIOUS DIAMETER AT BREAST HEIGHT (Item 8.5.3.2) and relocate the D.B.H. nail. pg.140 • If at the previous visit a forked tree was recorded as one tree but should have been recorded as two separate trees, correct the PREVIOUS DIAMETER AT BREAST HEIGHT for the remeasured tree to represent one tree, and add the other fork as a missed tree. Use the existing tree data line to represent one of the stems; PRESENT TREE STATUS = 1 or 2, DIAMETER CHECK = 2, and a TREE NOTE. The second stem would get PRESENT TREE STATUS = 1 or 2, RECONCILE = 3 or 4, and a TREE NOTE. The following are normal procedures that are to be followed with the exception of the addendums written above for lands owned by the Division of Forestry and Wildlife (DOFAW). If the diameter cannot be physically measured for any reason, estimate the diameter using a Relaskop or electronic equivalent. These procedures are described in Appendix I. Note: The current crew should not correct for subjective differences in interpretation of forked trees; i.e., only gross errors made by the previous crew should be corrected. If in doubt, use the previous crew's interpretation of the forked trees.

SUBSECTION 8.5.2 DIAMETER ON STUMPS Diameter on stump < 4.5 feet tall: Use a logger's tape, cloth tape or ruler to measure the longest and shortest axes across the top of the stump. Record diameter as the average of the two measurements.

SUBSECTION 8.5.3 DIAMETER AT BREAST HEIGHT Special DBH situations: 1. Forked tree: Forks originate at the point on the bole where the piths intersect. Forked trees are handled differently depending on whether the fork originates below 1.0 foot, between 1.0 and 4.5 feet, or above 4.5 feet. For trees with prop roots, consider the top of the prop roots the base of the tree for forking purposes and recognize all otherwise qualifying forks that occur within 3.5 feet of the top of the prop roots. A. Trees forked below 1.0 foot: Trees forked below 1.0 foot (see Figure 8.10) are treated as distinctly separate trees. The diameter and angle rules (see Trees forked between 1.0 foot and 4.5 feet, below) do not apply. However, lateral branches (e.g., a branch whorl) below one foot on a single-stemmed tree are not stems and should not be tallied. Distances and azimuths are measured individually to the center of each stem where it splits from the stump. DBH is measured for each stem at 4.5 feet above the ground. When stems originate from pith intersections below 1 foot, 1.0’ 1.0’ it is possible for some stems to be within the limiting distance of the microplot or subplot, and others to be beyond the limiting Pith intersection distance. If stems originating from forks that occur below 1.0 foot Figure 8.10: Trees forked below fork again between 1.0 and 4.5 feet, the rules in the next 1.0 foot paragraph apply. • Trees forked between 1.0 foot and 4.5 feet: In order to qualify as a fork, the stem in question must be at least 1/3 the diameter of the main stem and must branch out from the main stem at an angle of 45 degrees or less. The size of the prospective fork is measured at the point of separation (crotch), above any abnormal swelling at the crotch (see Figure 8.11). The angle of branching for the prospective fork is measured Figure 8.11: Trees forked between 1.0’ and 4.5’ DIAMETER in the immediate vicinity of pith : intersection (see Figure 8.11). Trees forked between 1.0 foot and 4.5 feet (see Figure 8.12) are tallied as separate trees, but the same distance and azimuth (to the central stump) is recorded for each stem. Although a single azimuth and distance applies to all, multiple stems should be recorded as they occur in clockwise order (from front to back when one stem is directly in front of another). The DBH of each fork is measured at a point 3.5 feet above the pith intersection. When Section 8.5 pg.141 forks originate from pith intersections between 1.0 and 4.5 feet, the limiting distance is the same for all forks – they are either all on, or all off the plot.Multiple forks are possible if they all originate from approximately the same point on the main stem. In such cases, measure DBH on all stems at 3.5 feet above the common pith intersection. • Once a stem is tallied as a fork that originated from a pith intersection between 1.0 and 4.5 feet, do not recognize any additional forks that may occur on that stem. Measure the diameter of such stems below the base of stem separation (i.e., do not move the point of diameter the entire 3.5 feet above the first fork).

Figure 8.12: Where to measure DBH on trees forked above 1.0 feet.

B. Trees forked at or above 4.5 feet: Trees forked at or above 4.5 feet count as one single tree Figure 8.13: One tree. If a fork occurs at or immediately above 4.5 feet, measure diameter below the fork just beneath any swelling that would inflate DBH. 2. Stump sprouts: Stump sprouts originate between ground level and 4.5 feet on the boles of trees that have died or have been cut. Stump sprouts are handled the same as forked trees, with the exception that stump sprouts are not required to be 1/3 the diameter of the Figure 8.13: One tree dead bole. Stump sprouts originating below 1.0 feet are measured at 4.5 feet from ground line. Stump sprouts originating between 1.0 feet and 4.5 feet are measured at 3.5 foot above their point of occurrence. As with forks, rules for measuring distance and azimuth depend on whether the sprouts originate above or below 1.0 feet. 3. Tree with irregularities at DBH: On trees with swellings, bumps, depressions, and branches at DBH, diameter will be measured immediately above the irregularity at the place it ceases to affect normal stem

form (Figure 8.14 through Figure 8.16). Chapter 8: TREE AND SAPLING DATA

Figure 8.14: Bottleneck treebutt Figure 8.15: Tree with a Figure 8.16: Tree with a branch at 4.5 swell swell at 4.5 feet feet 4. Tree on slope: Measure diameter at 4.5 feet from the ground along the bole on the uphill side of the tree (Figure 8.17: Tree on a slope). pg.142 5. Leaning tree: Measure diameter at 4.5 feet from the ground along the bole. The 4.5 foot distance is measured along the underside face of the bole (Figure 8.18: Leaning tree) 6. Turpentine tree: On trees with turpentine face extending above 4.5 feet, estimate the diameter at 10.0 feet above the ground and multiply by 1.1 to estimate DBH outside bark. Figure 8.17: Tree on a slope Figure 8.18: Leaning tree 7. Independent trees that grow together: If two or more independent stems have grown together at or above the point of DBH (Figure 8.19), continue to treat them as separate trees.Set two diameter nails at DBH halfway around the tree's circumference from each other (after placing 1st nail, stand back from bole; take azimuth to nail; on opposite side of bole, place nail where the back azimuth of the first nail lines up). Measure the distance between the nails with a diameter tape making sure zero is aligned and not the hook at the end of the diameter tape with one diameter nail. Multiply the measurement by 2 and record the result as the current diameter. Example: Distance measured = 12.8 inches (12.8 X 2) = 25.6 inches. Figure 8.19: Independent trees growing Set the DIAMETER CHECK code to “7”. together • If unable to use the “Double Nail Method” estimate the diameter of each, set the “DIAMETER CHECK” code to “1“, and explain the situation in TREE NOTES. 8. Missing wood or bark: Do not reconstruct the DBH of a tree that is missing wood or bark at the point of measurement (Figure 8.20). Record the diameter, to the nearest 0.1 inch, of the wood and bark that is still attached to the tree. If a tree has a localized abnormality (gouge, depression, etc.) at the point of DBH, apply the procedure described for trees with irregularities at DBH Figure 8.20: Tree with Figure 8.21: Live wind-thrown 9. Live windthrown tree: Measure from missing wood or bark tree the top of the root collar along the length to 4.5 feet (Figure 8.21). 10.Down live tree with tree-form branches growing vertical from main bole: When a down live tree, touching the ground, has vertical (less than 45 degrees from vertical) tree-like branches coming off the main bole, determine whether or not the pith of the main bole (averaged along the first log of the tree) is above or below the duff layer. A. If the pith of the main bole is above the duff layer, use the same forking rules specified for a forked tree, and take all measurements accordingly unless: DIAMETER : Section 8.5 pg.143 • If the pith intersection of the main down bole and vertical tree-like branch occurs below 4.5 feet from the stump along the main bole, treat that branch as a separate tree, and measure DBH 3.5eet above the pith intersection for both the main bole and the tree-like branch (Figure Figure 8.22: Down tree above duff 8.22). • If the intersection between the main down bole and the tree-like branch occurs beyond the 4.5 foot point from the stump along the main bole, treat that branch as part of the main down bole (Figure 8.23).

Figure 8.23: Branch beyond 4.5 feet from stump B. If the pith of main tree bole is below the duff layer, ignore the main bole, and treat each tree-like branch as a separate tree; take DBH and length measurements from the ground, not necessarily from the top of the down bole (Figure Chapter 8:

Figure 8.24: Down tree below duff TREE AND SAPLING DATA pg.144 8.24). However, if the top of the main tree bole curves out of the ground towards a vertical angle, treat that portion of that top as an individual tree originating where the pith leaves the duff layer.Tree with curved bole (pistol butt tree): Measure along the bole on the uphill side (upper surface) of the tree (Figure 8.25).

Figure 8.25: Tree with curved bole (pistol butt tree) 11.For trees with buttressed roots measure the diameter 3.5 feet above the top of the root collar. 12.For trees with prop roots measure the diameter at 3.5 feet above the top of the highest prop root. Note: When remeasuring trees with prop roots, avoid moving previous DBH nails unless the previous DBH location is obstructed by prop roots, regardless of whether new prop roots have grown in above the previous DBH location. If the previous DBH location is obstructed by prop roots, move the nail 3.5 feet above the top of the prop roots, record DIAMETER CHECK CODE = 2, and update the previous DBH.

Item 8.5.3.1 PREVIOUS DIAMETER AT BREAST HEIGHT (CORE 5.9.1) [TREE.PREVDIA_FLD, TREE.HIST_PREV_DIA] This is the DBH assigned at the previous annual inventory. It has been downloaded from the previous inventory. Any change made to this field signifies a procedural change or an error at the time of the previous inventory. Downloaded data should be verified, and updated if one of two situations occurs: 1. The current diameter measurement point is moved to correspond with the corrected location (either because of procedural change, obstruction at old DBH location, or previous crew error in nail location). DIAMETER CHECK should be set to “2” and an explanation is required in the TREE NOTES. 2. It is clear that there was a typo, illogical value or poorly estimated PREVIOUS DIAMETER AT BREAST HEIGHT. Estimate the new value for PREVIOUS DIAMETER AT BREAST HEIGHT by doing one of the following: • Measure the diameter at both the correct diameter location and at the previous diameter location. Determine the difference between these two diameters. Add or subtract this value (the difference) to the downloaded value of the PREVIOUS DIAMETER. This will provide an estimate of PREVIOUS DIAMETER corresponding to the corrected location. • Estimate the correct PREVIOUS DIAMETER based on the "best" information at hand (e.g., the PREVIOUS DIAMETER of similar sized nearby trees of the same species). When collected: Downloaded when SAMPLE KIND = 2: all previously tallied trees ≥ 1.0 inch DBH Field width: 4 digits (xxx.y) Tolerance: N/A Values: 001.0 to 999.9 DIAMETER : Section 8.5 pg.145 Item 8.5.3.2 DIAMETER AT BREAST HEIGHT (CORE 5.9.2) [TREE.DIA] Unless one of the special situations listed in Subsection 8.5.3 (Diameter at Breast Height; Special DBH Situations) is encountered, measure DBH at 4.5 feet above the ground line on the uphill side of the tree. Round each measurement down to the last 0.1 inch. For example, a reading of 3.68 inches is recorded as 3.6 inches. When collected: All live and standing dead tally trees ≥ 1.0 inch DBH, witness-only trees (PRESENT TREE STATUS = 1, 2 or 8); and witness stumps* (PRESENT TREE STATUS = 7) Field width: 4 digits (xxx.y) Tolerance: Live trees and dead trees +/- 0.1 inch per 20.0 inch increment of measured with DECAY CLASS 1, 2 diameter. Standing dead trees with +/- 1.0 inch per 20.0 inch increment of measured DECAY CLASS 3, 4, 5 diameter. Values: 001.0 to 999.9 *Note: Although stumps do not meet DBH criteria, their DIAMETERS are recorded in this data item.

SUBSECTION 8.5.4 ADDITIONAL DIAMETER DATA ITEMS

Item 8.5.4.1 DIAMETER CHECK (CORE 5.12) [TREE.DIACHECK_PNWRS] Record this code to identify the accuracy of the diameter measurement due to factors such as abnormal swellings, diseases, damage, new measurement positions, etc. that may affect use of this tree in diameter growth/change analyses. Note: If both code 2 and codes 1, 5, 6, or 7 apply, diameter is both estimated and moved, use code 2 and change the PREVIOUS DIAMETER if necessary. If diameter is estimated because of moss/vine/obstruction, record an estimate of the diameter without the obstruction. Do not remove moss, lichens, or vines. If diameter at the current inventory is measured at a different location than at the previous inventory, record DIAMETER CHECK = 2 and remove the d-nail(s) from the previous inventory. If the previous point diameter measurement cannot be found on a live tree (i.e., nail fell out) also record code “2”. DIAMETER CHECK = 2 should not be coded for remeasurement saplings without diameter nails or trees without nails due to monumenting restrictions (such as trees in National Parks). In addition, DIAMETER CHECK = 2 should not be coded if the diameter is measured at the LENGTH TO DIAMETER recorded by the previous crew, regardless of whether a diameter nail is present or not. Note: If either code 1 or code 2 is used, a tree-level note is required. When Collected: All live and standing dead tally trees ≥ 1.0 inch DBH Field width: 1 digit

Tolerance: No errors Chapter 8: Values: PNW Description Core Code (office use Code only) 0 Diameter measured accurately at correct location 0 1 Diameter estimated, for any reason other than moss, vines, or 1 the double nail method

2 Diameter measured at different location than previous 2 TREE AND SAPLING DATA measurement (remove original d-nail): no old nail found, or previous diameter was obviously incorrect; value has been updated. An electronic Tree Note is required to describe the situation. 5 Diameter estimated because of moss 1 6 Diameter estimated because of vines 1 7 Diameter estimated (double nail diameter) 1 8 Measured with the electronic relaskop 0 pg.146 Item 8.5.4.2 LENGTH TO DIAMETER MEASUREMENT POINT (CORE OPTIONAL 5.24) [TREE.HTDMP] This item will be populated with the previous crew’s length to diameter measurement for remeasurement trees and will autopopulate to 4.5 feet for new trees. For remeasurement trees, only change the previous crew’s value if there is an obvious data entry error or if the point of diameter measurement is moved, in which case diameter check should be “2.” For new trees measured directly at 4.5 feet from the top of the base of the tree, leave this autopopulated number. If the diameter is not measured at 4.5 feet, record the actual length from the base of the tree, to the nearest 0.1 inch, at which the diameter was measured for each tally tree, 1.0 inch DBH and larger. When Collected: All live and dead tally trees ≥ 1.0 inches DBH Field width: 4 digits Tolerance: +/- 0.2 feet Values: 00.1 – 30.0 (autopopulated with 4.5 - updatable)

SECTION 8.6 ROOT MEASUREMENTS FOR TROPICAL TREES Tropical trees can exhibit prop (or stilted roots), buttressed roots, and various forms of aerial rooting systems. To accurately account for the often significant biomass associated with these special root systems, please measure and note the following.

Item 8.6.0.1 TYPE OF ROOTING SYSTEM (PACI) [TREE.ROOT_SYSTEM_PNWRS] Record the type of rooting system of tally trees and snags. When Collected: All live and standing dead tally trees ≥5.0 inches DBH Field width: 1 digit Tolerance: No errors Values: Code Description 0 Normal roots (Default) - no other root measurements are needed 1 Prop (Stilted) roots - record root diameters, rooting height, and density code 2 Buttressed roots - record number of buttresses and rooting heighy

Item 8.6.0.2 NUMBER OF TREES IN SHARED ROOT SYSTEM (PACI) [TREE.NBR_TREES_ROOT_SYSTEM_PNWRS] Record the number of trees sharing the prop root system. If there is more than 1 tree in the same system and the root systems cannot be differentiated then each tree will get the same value for the root diameter, prop root density and rooting height. Tree volume will be divided by the number of trees in the shared system. Code 1 will be default for all trees. When Collected: All live and standing dead tally trees ≥5.0 inches DBH with ROOTING SYSTEM = 1 Field width: 2 digits Tolerance: No errors Values: 01 to 99

Item 8.6.0.3 ROOT DIAMETER 1 (PACI) [TREE.STILT_ROOT_DIA1_PNWRS] Record the largest diameter (to the nearest foot) of the entire prop root system at ground level. When Collected: All live and standing dead tally trees ≥5.0 inches DBH with ROOTING SYSTEM = 1 Field width: 2 digits Tolerance: +/- 10percent ROOT MEASUREMENTS FOR TROPICAL TREES ROOT MEASUREMENTS FOR TROPICAL

: Values: 01 to 99 feet Section 8.6 pg.147 Item 8.6.0.4 ROOT DIAMETER 2 (PACI) [TREE.STILT_ROOT_DIA2_PNWRS] Record the diameter of the prop root system perpendicular to the largest diameter recorded above, also at ground level and to the nearest foot. When Collected: All live and standing dead tally trees ≥5.0 inches DBH with ROOTING SYSTEM = 1 Field width: 2 digits Tolerance: +/- 10 percent Values: 01 to 99 feet

Item 8.6.0.5 ROOTING HEIGHT (PACI) [TREE.ROOT_HT_PNWRS] Record the height of the stilted or buttressed root system to the nearest foot, from ground level to the highest point where the stilts or buttresses protrude from the bole of the tree. When Collected: All live and standing dead tally trees ≥5.0 inches DBH with ROOTING SYSTEM = 1 or 2 Field width: 2 digits Tolerance: +/- 10 percent Values: 01 to 99 feet

Item 8.6.0.6 PROP ROOT DENSITY (PACI) [TREE.STILT_DENSITY_PNWRS] For prop roots, record the stilted roots figure number that best represents the density and structure of the stilted root system. Chapter 8: TREE AND SAPLING DATA

Figure 8.26: Examples of prop root density pg.148

When Collected: All live and standing dead tally trees ≥5.0 inches DBH with ROOTING SYSTEM = 1 Field width: 2 digits Tolerance: No errors Values: 1-3 (as shown in Figure 8.26)

Item 8.6.0.7 NUMBER OF BUTTRESSES (PACI) [TREE.NO_BUTTRESSES_PNWRS] For buttressed roots, record the number of buttresses. When Collected: All live and standing dead tally trees ≥5.0 inches DBH with ROOTING SYSTEM = 2 Field width: 2 digits Tolerance: +/- 2 Values: 01 to 99

SECTION 8.7 TREE GROWTH

SUBSECTION 8.7.1 TREE LENGTH

Item 8.7.1.1 PREVIOUS ACTUAL LENGTH (PNW) [TREE.PREV_ACTUALHT_PNWRS] This is the actual tree length measured by the field crew during the previous annual visit. It has been downloaded from the annual inventory and will be editable by the current field crew. These data are provided to help ensure quality of tree length data through comparison of the previous length versus the currently measured length, and to assist in estimation of current tree length, if estimation is necessary due to lean, dead top, etc. Editing or otherwise overwriting the PREVIOUS ACTUAL LENGTH is restricted to the following scenarios: 1. Obvious error: Correct PREVIOUS ACTUAL LENGTH if error appears to be greater than twenty percent of the PREVIOUS ACTUAL LENGTH. 2. Data entry error: Correct PREVIOUS ACTUAL LENGTH if error is diagnosable as a typographical error. Any change made to this field signifies an error at the time of the previous inventory. When collected: When SAMPLE KIND = 2: all downloaded live tally trees ≥ 1.0 inch DBH; and standing dead tally trees ≥ 1.0 inch DBH with a measured (not estimated) ACTUAL LENGTH at the previous inventory Field width: 3 digits Tolerance: N/A Values: 001 to 400

Item 8.7.1.2 ACTUAL LENGTH (CORE 5.15) [TREE.ACTUALHT] The ACTUAL LENGTH of the tree is recorded from ground level (measured from the uphill side of a tree on a slope) to the highest remaining portion of the tree still present and attached to the bole. For trees with missing tops (top on live trees is completely detached; top on dead trees is greater than 50 percent detached from the tree), record the ACTUAL LENGTH of the tree to the nearest 1.0 foot from ground level to the break. Use the length to the break for ACTUAL LENGTH until a new leader qualifies as the new top for TOTAL LENGTH; until that occurs, continue to record ACTUAL LENGTH to the break. Trees with previously broken tops are considered recovered (i.e., ACTUAL LENGTH = TOTAL LENGTH) when a new leader is 1/3 the diameter of the broken top at the point where the top was broken (not where the new leader originates from the trunk). Account for lean (see Figure 8.27: Measuring height of leaning tree), but TREE GROWTH TREE

: do not add length for crooks and sweeps. Forked trees should be treated the same as unforked trees. ACTUAL LENGTH should only differ from TOTAL LENGTH if the tree has a broken or missing top. When Collected: All live and standing dead tally trees ≥ 1.0 inch DBH Field width: 3 digits Section 8.7 pg.149 Tolerance: +/- 5 percent of true length for live trees < 60 feet +/- 10 percent of true length for live trees ≥ 60 feet and all dead trees Values: 001 to 400

Item 8.7.1.3 PREVIOUS TOTAL LENGTH (PNW) [TREE.PREV_HT_PNWRS] This is the total tree length recorded by the field crew during the previous annual visit. It has been downloaded from the annual inventory and will be editable by the current field crew. These data are provided to help ensure quality of tree length data through comparison of the PREVIOUS TOTAL LENGTH to the currently measured TOTAL LENGTH, and to assist in estimation of current tree length, if estimation is necessary due to lean, dead top, etc. Editing or otherwise overwriting the PREVIOUS TOTAL LENGTH is restricted to the following scenarios: 1. Obvious error: Correct PREVIOUS TOTAL LENGTH if error appears to be greater than twenty percent of PREVIOUS TOTAL LENGTH. 2. Data entry error: Correct PREVIOUS TOTAL LENGTH if error is diagnosable as a typographical error. Any change made to this field signifies an error at the time of the previous inventory. When collected: When SAMPLE KIND = 2: all downloaded live tally trees ≥ 1.0 inch DBH; and standing dead tally trees ≥ 1.0 inch DBH with a recorded TOTAL LENGTH at the previous inventory Field width: 3 digits Tolerance: N/A Values: 001 to 400

Item 8.7.1.4 TOTAL LENGTH (CORE 5.14) [TREE.HT] Record the TOTAL LENGTH of the tree, to the nearest 1.0 foot from ground level to the top of the tree. For trees growing on a slope, measure on the uphill side of the tree. If the tree has a missing top (top is broken and completely detached from the tree), estimate what the total length would be if there were no missing top. Account for lean (see Figure 8.27), but do not add length for crooks and sweeps. Forked trees should be treated the same as unforked trees. Height on leaning trees: Measure or estimate total normally-formed bole length (from the base to the tip of the tree), and not the perpendicular from the ground to the tip. To measure heights of leaning trees using a clinometer, follow these steps: Step 1. Move to a point along a line (point D) that is perpendicular to the plane in which the tree Chapter 8: is leaning. Step 2. Using a clinometer, measure the height of point A above point B. Step 3. By standing at the base of the tree and sighting up the bole with your clinometer,

measure the slope of the bole in degrees TREE AND SAPLING DATA (Angle E in the diagram above). Step 4. Subtract the degrees of lean (step 3) from 90 degrees. This gives you the degrees of angle F. Step 5. By sighting through your clinometer, convert the angle calculated in step 4 to a percentage.

Figure 8.27: Measuring height of leaning tree pg.150 Step 6. Use the slope correction table in Appendix A to determine the expansion factor for the percent slope determined in step 5. Multiply the expansion factor by the measured distance from point A to point B (step 2). This gives the length of the bole (point A to point C). When Collected: All live and dead tally trees ≥ 1.0 inch DBH Field width: 3 digits Tolerance: +/- 10 percent of true length Values: 001 to 400

Item 8.7.1.5 LENGTH METHOD (CORE 5.16) [TREE.HTCD] Record the code that indicates the method used to determine tree length. When Collected: All live and standing dead tally trees ≥ 1.0 inch DBH Field width: 1 digit Tolerance: No errors Values: Code Description 1 Total and actual lengths are field measured with a measurement instrument (e.g., clinometer, relascope, tape, laser) 2 Total length is visually estimated, actual length is measured with an instrument 3 Total and actual lengths are visually estimated (not measured)

Item 8.7.1.6 PREVIOUS LENGTH METHOD (PNW) [TREE.PREV_HTCD_PNWRS] Downloaded code indicating the method used to determine tree length at the previous visit. This field cannot be updated by the field crew. When Collected: All live tally trees ≥ 1.0 inch DBH and all standing dead tally trees ≥ 1.0 inches DBH recorded at the previous inventory Field width: 1 digit Tolerance: No errors Values: Code Description 1 Total and actual lengths are field measured with a measurement instrument (e.g., clinometer, relascope, tape, laser) 2 Total length is visually estimated, actual length is measured with an instrument 3 Total and actual lengths are visually estimated (not measured)

SUBSECTION 8.7.2 TREE LIVE CROWN MEASUREMENTS

Item 8.7.2.1 COMPACTED CROWN RATIO (CORE 5.19) [TREE.CR] Record the COMPACTED CROWN RATIO for each live tally tree, 1.0 inch and larger, to the nearest one percent. COMPACTED CROWN RATIO is that portion of the tree supporting live foliage (or in the case of extreme defoliation should be supporting live foliage) and is expressed as a percentage of the ACTUAL TREE LENGTH (include dead tops but not missing tops in the ratio). To determine COMPACTED CROWN RATIO, ocularly transfer lower live branches to fill in large holes in the upper portion of the tree until a full, even crown is visualized. Do not over-compact trees beyond their typical full crown structure. For example, if tree branches tend to average 2 feet between whorls, do not compact crowns any tighter than the 2-foot spacing (Figure 8.28). Include epicormic branches with a 1-inch diameter or greater. TREE GROWTH TREE : Section 8.7 pg.151

Figure 8.28: Example of Crown Ratio on Open-crown tree (e.g., Terminalia catappa) Chapter 8:

Figure 8.29: Example of Crown Ratio on Dense-crown tree (e.g.e, Mangifera indica) TREE AND SAPLING DATA pg.152

Figure 8.30: Compacted and Uncompacted crown ratios will be the same for tree ferns and palm trees except when fronds or large parts of fronds are missing.

Figure 8.31: Compacted crown ratio on a leaning tree. Compacted crown ration = (x/y) 100.

Note: Crown ratio is based on the ratio of foliage, not where the limbs attach to the tree bole. Crown ratio is an indicator of a tree's vigor. In data analysis, trees with a crown ratio of 30 percent or less are considered less vigorous. For this reason, be particularly careful when deciding between codes greater or less than "30". It is preferable to use a laser or clinometer to measure live crown ratios on these TREE GROWTH TREE

: trees. When Collected: All live tally trees ≥ 1.0 inch DBH Field width: 2 digits Tolerance: +/- 10 percent Values: 00 to 99 Section 8.7 pg.153 Item 8.7.2.2 CROWN CLASS (CORE 5.17) [TREE.CCLCD] Rate tree crowns in relation to the sunlight received and proximity to neighboring trees (Figure 8.32). Base the assessment on the position of the crown at the time of observation. Example: a formerly overtopped tree that is now dominant due to tree removal is classified as dominant. This data item is used to predict tree growth. The intermediate and overtopped crown classes are meant to include trees seriously affected by direct competition with adjacent trees.

Figure 8.32: Examples of CROWN CLASS by code definitions (numbers are CROWN CLASS codes)

Crown class describes a tree's "social" position in the stand and may indicate how well the tree is competing for light. For example, a young, vigorous tree that is considerably shorter than other trees in the stand – but that is not overtopped by other trees and that receives full light from above and partly from the side – is classified as dominant. The same principle applies to two-storied stands: understory trees should only be assigned subordinate crown classes if they are adjacent to overtopping trees. In plots with scattered residual overstory trees over younger trees, a considerable portion of the understory trees will be classified as dominant or codominant.

When Collected: All live tally trees ≥1.0 inch DBH Field width: 1 digit Tolerance: No errors Chapter 8: TREE AND SAPLING DATA pg.154 Values: Code Description 1 Open Grown – trees with crowns that received full light from above and from all sides throughout most of its life, particularly during its early developmental period. 2 Dominant – trees with crown extending above the general level of the crown canopy and receiving full light from above and partly from the sides. These trees are taller than the average trees in the stand and their crowns are well developed, but they could be somewhat crowded on the sides. Also, trees whose crowns have received full light from above and from all sides during early development and most of their life. Their crown form or shape appears to be free of influence from neighboring trees. 3 Co-dominant – trees with crowns at the general level of the crown canopy. Crowns receive full light from above but little direct sunlight penetrates their sides. Usually they have medium-sized crowns and are somewhat crowded from the sides. In stagnated stands, co-dominant trees have small-sized crowns and are crowded on the sides. 4 Intermediate – trees that are shorter than dominants and co-dominant, but their crowns extend into the canopy of co-dominant and dominant trees. They receive little direct light from above and none from the sides. As a result, intermediate trees usually have small crowns and are very crowded from the sides. 5 Overtopped – trees with crowns entirely below the general level of the crown canopy that receive no direct sunlight either from above or the sides.

Item 8.7.2.3 BRANCHING CHARACTERISTICS (PACI) [TREE.BRANCH_FORM_PNWRS] Record the branching form figure number that best represents the density and structure of the branching system. TREE GROWTH TREE : Section 8.7 pg.155

When Collected: All live and standing dead tally trees ≥ 5.0 inches DBH Field width: 1 digits Tolerance: No errors Values: 0 to 6 (as shown)

Item 8.7.2.4 AERIAL ROOT DENSITY (PACI) [TREE.AERIAL_ROOTS_PNWRS] If there are aerial roots, record the aerial root figure number that best represents the density and branching structure of the aerial root system. If there are no aerial roots, record 0 for this column.

When Collected: All live and standing dead tally trees ≥ 5.0 inches DBH

Field width: 1 digits Chapter 8: Tolerance: No errors Values: 0 (no aerial roots) and 1 to 3 (as shown below)

SECTION 8.8 TREE DAMAGE

Damage is a composite variable. Up to three damaging agents may be recorded per tree. Many damaging TREE AND SAPLING DATA agents are host specific and their potential for damage could vary by region. In general, a recorded damage is likely to: 1. Prevent the tree from surviving more than 1-2 years 2. Reduce the growth of the tree in the near term 3. Negatively affect a tree's marketable products (cubic, BF, or other) pg.156 It is not necessary to record damage agents in order of their severity unless there are more than three agents. If there are more than three agents, record only the most important ones using the list of impacts above as a guide (i.e., agents threatening survival are more important than agents that reduce wood quality). In general, agents that affect the roots or bole tend to be most threatening, because they have the capacity to affect the entire tree; damage to peripheral parts of the tree may be temporary because leaves, shoots, and reproductive structures may be replaced. Codes used for this variable come from a January 2012 Pest Trend Impact Plot System (PTIPS) list from the Forest Health Technology Enterprise Team (FHTET) that has been modified to meet FIA needs. This list is made up of General Agents and then further subdivided into specific agents. Not every General Agent PTIPS code will be available for use for this variable; some do not cause tree damage as defined above while others are better recorded in a different General Agent. Not every specific agent PTIPS code will be available for use for this variable. Regions will decide which specific agents they will identify in their areas. Record the general agent unless the Region opts to collect specific agents. Specific agents can later be collapsed into the general agent categories for cross-region comparisons. In the unusual instance when more than one specific agent in the same general category occurs on the same tree, record them both. If a specific agent is identified on that plot but that agent is not on the regionally recognized list of codes for damage agents, use its General Agent code. Appendix D contains the regionally recognized list of codes for damage agent based on the modified PTIPS list from FHTET. Only the specific agent codes from Appendix D may be used instead of the general codes listed under DAMAGE AGENT 1. Any damage code in Appendix D may be used for DAMAGE AGENT 1, DAMAGE AGENT 2, or DAMAGE AGENT 3.

Item 8.8.0.1 DAMAGE AGENT 1 (CORE 5.20.1 [TREE.DAMAGE_AGENT_CD1] Inspect the tree from bottom to top - roots, bole, branches, foliage (including buds and shoots). Record the first damage agent observed from the list of agents (unless you observe more than 3 damages). If there are more than three agents, record only the most important ones using the list of impacts listed in Section 8.8 as a guide (i.e., agents threatening survival are more important than agents that reduce wood quality). The general agent codes, damage thresholds, and general agent descriptions are listed here. Specific agents within the general categories, if required by your Region, are listed in Appendix D, along with their associated thresholds. These codes can be collapsed into the national core general codes. Note: in some cases, thresholds for specific agents may be different from the threshold for the corresponding general agent. If a region is collecting a specific insect agent and no one is collecting the general agent, then the specific insect agent is collapsed into the general insect category 10000. When collected: All live tally trees ≥ 1.0 in DBH Field width: 5 digits Tolerance: No errors Values: General Agent Damage Codes, Damage Thresholds, and Descriptions. Specific agent codes are in Appendix D. CODE GENERAL AGENT DAMAGE THRESHOLD* DESCRIPTIONS 0 No damage 10000 General insects Any damage to the terminal leader; Insect damage that cannot be placed in any of the following damage >20% of the roots or boles insect categories. with >20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected. TREE DAMAGE TREE : Section 8.8 pg.157 11000 Bark beetles Any evidence of a successful attack Bark beetles (Dendroctonus, Ips, and other genera) are (successful attacks generally exhibit phloem-feeding insects that bore through the bark and create boring dust, many pitch tubes and/or extensive galleries between the bark and the wood. Symptoms fading crowns). of beetle damage include fading or discolored tree crown (yellow or red), pitch tubes or pitch streaks on the bark, extensive egg galleries in the phloem, boring dust in the bark crevices or at the base of the tree. Bark chipping by woodpeckers may be conspicuous. They inflict damage or destroy all parts of trees at all stages of growth by boring in the bark, inner bark, and phloem. Visible signs of attack include pitch tubes or large pitch masses on the tree, dust and frass on the bark and ground, and resin streaming. Internal tunneling has various patterns. Most have tunnels of uniform width with smaller galleries of variable width radiating from them. Galleries may or may not be packed with fine boring dust. 12000 Defoliators Any damage to the terminal leader; These are foliage-feeding insects that may reduce growth and damage ≥20% of the foliage with ≥50% weaken the tree causing it to be more susceptible to other of the leaf/needle affected. damaging agents. General symptoms of defoliation damage include large amounts of missing foliage, browning foliage, extensive branch mortality, or dead tree tops. 14000 Sucking insects Any damage to the terminal leader; Adelgids, scales and aphids feed on all parts of the tree. Often damage ≥20% of the foliage with ≥50% they cause galling on branches and trunks. Some appear of the leaf/needle affected benign but enable fungi to invade where they otherwise could not (e.g., beech bark disease). The most important ones become conspicuous because of the mass of white, cottony wax that conceals eggs and young nymphs. 15000 Boring insects Any damage to the terminal leader; Most wood boring insects attack only severely declining and damage ≥20% of the roots, stems, or dead trees. Certain wood boring insects cause significant branches. damage to trees, especially the exotic Asian longhorn beetle, emerald ash borer, and Sirex wood wasp. Bark beetles have both larval and adult galleries in the phloem and adjacent surface of the wood. Wood borers have galleries caused only by larval feeding. Some, such as the genus Agrilus (including the emerald ash borer) have galleries only in the phloem and surface of the wood. Other wood borers, such as Asian longhorn beetle bore directly into the phloem and wood. Sirex adults oviposit their eggs through the bark, and developing larvae bore directly into the wood of pines. 19000 General diseases Any damage to the terminal leader; Diseases that cannot be placed in any of the following disease damage >20% of the roots or boles categories. with >20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ Chapter 8: needle affected. 21000 Root/butt diseases Any occurrence. Root disease kills all or a portion of a tree’s roots. Quite often, the pathogenic fungus girdles the tree at the root collar. Tree damage includes mortality (often occurring in groups or “centers”), reduced tree growth, and increased susceptibility to other agents (especially bark beetles). General symptoms include resin at the root collar, thin, chlorotic (faded) foliage, TREE AND SAPLING DATA and decay of roots. A rot is a wood decay caused by fungi. Rots are characterized by a progression of symptoms in the affected wood. First, the wood stains and discolors, then it begins to lose its structural strength, and finally the wood starts to break down, forming cavities in the stem. Even early stages of wood decay can cause cull due to losses in wood strength and staining of the wood. Rot can lead to mortality, cull, an increased susceptibility to other agents (such as insects), wind throw, and stem breakage. pg.158 22000 Cankers (non-rust) Any occurrence. A canker -- a sunken lesion on the stem caused by the death of cambium -- may cause tree breakage or kill the portion of the tree above the canker. Cankers may be caused by various agents but are most often caused by fungi. A necrotic lesion begins in the bark of branches, trunk or roots, and progresses inward killing the cambium and underlying cells. The causal agent may or may not penetrate the wood. This results in areas of dead tissue that become deeper and wider. There are two types of cankers, annual and perennial. Annual cankers enlarge only once and do so within an interval briefer than the growth cycle of the tree, usually less than one year. Little or no callus is associated with annual cankers, and they may be difficult to distinguish from mechanical injuries. Perennial cankers are usually the more serious of the two, and grow from year to year with callus forming each year on the canker margin, often resulting in a target shape. The most serious non-rust cankers occur on hardwoods, although branch mortality often occurs on conifers. 22500 Stem decays Any visual evidence (conks; fruiting Rot occurring in the bole/stems of trees above the roots and bodies; rotten wood) stump. 23000 Parasitic / Epiphytic Dwarf mistletoes with Hawksworth Parasitic and epiphytic plants can cause damage to trees in a plants rating of ≥3; true mistletoes and vines variety of ways. The most serious ones are dwarf mistletoes, covering ≥ 50% of crown. which reduce growth and can cause severe deformities. Vines may damage trees by strangulation, shading, or physical damage. Benign s, such as lichens or mosses, are not considered damaging agents. 24000 Decline Complexes/ Damage ≥ 20 % dieback of crown Tree disease which results not from a single causal agent but Dieback/Wilts area. from an interacting set of factors. Terms that denote the symptom syndrome, such as dieback and wilt, are commonly used to identify these diseases. 25000 Foliage diseases Damage ≥20% of the foliage with Foliage diseases are caused by fungi and result in needle ≥50% of the leaf/needle affected. shed, growth loss, and, potentially, tree mortality. This category includes needle casts, blights, and needle rusts. 26000 Stem rusts Any occurrence on the bole or stems A stem rust is a disease caused by fungi that kill or deform all (on multi-stemmed woodland species), or a portion of the stem or branches of a tree. Stem rusts are or on branches ≤1 foot from boles or obligate parasites and host specialization is very common. stems; damage to ≥20% of branches They infect and develop on fast-growing tissues and cause accelerated growth of infected tissues resulting in galls or cankers. Heavy resinosis is usually associated with infections. Sometimes yellow or reddish-orange spores are present giving a “rusty” appearance. Damage occurs when the disease attacks the cambium of the host, girdling and eventually killing the stem above the attack. Symptoms of rusts include galls (an abnormal and pronounced swelling or deformation of plant tissue that forms on branches or stems) and cankers (a sunken lesion on the stem caused by death of the cambium which often results in the death of tree tops and branches). 27000 Broom rusts ≥50% of crown area affected. Broom rust is a disease caused by fungi that kill or deform all or a portion of the branches of a tree. Broom rusts are obligate parasites and host specialization is very common. They infect and develop on fast-growing tissues and cause accelerated growth of infected tissues resulting in galls. Symptoms of rusts include galls, an abnormal and pronounced swelling or deformation of plant tissue that forms on branches or stems. 30000 Fire Damage ≥ 20% of bole circumference; Fire damage may be temporary, such as scorched foliage, or >20% of stems on multi-stemmed may be permanent, such as in cases where cambium is killed woodland species affected; ≥20% of around some portion of the bole. The location and amount of crown affected fire damage will determine how the damage may affect the growth and survival of the tree. Fire often causes physiological

TREE DAMAGE TREE stress, which may predispose the tree to attack by insects of : other damaging agents. Section 8.8 pg.159 41000 Wild animals Any damage to the terminal leader; Wild animals from birds to large mammals cause open damage ≥20% of the roots or boles wounds. Some common types of damage include: sapsucker with> 20% of the circumference bird peck, deer rub, bear clawing, porcupine feeding, and affected; damage >20% of the beaver gnawing. multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected. 42000 Domestic animals Any damage to the terminal leader; Open wounds caused by cattle and horses occur on the roots damage ≥20% of the roots or boles and lower trunk. Soil compaction from the long term presence with> 20% of the circumference of these animals in a woodlot can also cause indirect damage. affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected. 50000 Abiotic Any damage to the terminal leader; Abiotic damages are those that are not caused by other damage ≥20% of the roots or boles organisms. In some cases, the type and severity of damage with> 20% of the circumference may be similar for different types of agents (e.g., broken affected; damage >20% of the branches from wind, snow, or ice). multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected. 60000 Competition Overtopped shade intolerant trees that Suppression of overtopped shade intolerant species. Trees are not expected to survive for 5 years that are not expected to survive for 5 years or saplings not or saplings not expected to reach tree expected to reach tree size (5.0 inches DBH). size (5.0 inches DBH). 70000 Human activities Any damage to the terminal leader; People can injure trees in a variety of ways, from poor pruning, damage ≥20% of the roots or boles to vandalism, to logging injury. Signs include open wounds or with> 20% of the circumference foreign embedded objects. affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected. 90000 Other damage Any damage to the terminal leader; damage ≥20% of the roots or boles

with> 20% of the circumference Chapter 8: affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected. TREE AND SAPLING DATA 99000 Unknown damage Any damage to the terminal leader; Use this code only when observed damage cannot be damage ≥20% of the roots or boles attributed to a general or specific agent. with> 20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected. * Some Regional specific damage agents within a category may have differing damage thresholds. pg.160 Item 8.8.0.2 DAMAGE AGENT 2 (CORE 5.20.2) [TREE.DAMAGE_AGENT_CD2] Follow procedures described for DAMAGE AGENT 1. When collected: All live tally trees ≥ 1.0 in DBH Field width: 5 digits Tolerance: No errors Values: See Item 8.8.0.1

Item 8.8.0.3 DAMAGE AGENT 3 (CORE 5.20.3) [TREE.DAMAGE_AGENT_CD3] Follow procedures described for DAMAGE AGENT 1. When collected: All live tally trees ≥ 1.0 in DBH Field width: 5 digits Tolerance: No errors Values: See Item 8.8.0.1

Item 8.8.0.4 EPIPHYTE LOADING (PACI) [TREE.EPIPHYTE_PNWRS] Record a code indicating the extent of epiphyte loading for all live trees ≥ 1.0 in. d.b.h. “Epiphyte” is defined as a plant that uses a tree for support, but does not draw nourishment from it. For our purposes, vines and lianas are considered epiphytes and only vascular species will be included in the total. Use the Hawksworth six-class rating system: divide the tree into thirds, and rate each third using the following scale. Code Epiphytes Description 0 No visible epiphytes None 1 Light epiphytes < 50 percent of the brances or bole is loaded with epiphytes 2 Heavy epiphytes > 50 percent of the branches or bole loaded with epiphytes Sum the three individual ratings to obtain a total epiphyte class (0 to 6) for the tree. TREE DAMAGE TREE :

Figure 8.33: Example of epiphyte loading for tree crown. Section 8.8 pg.161

When collected: All live trees ≥ 1.0 inch DBH Field width: 1 digit Tolerance: +/- 1 class Values: 0 to 6

Item 8.8.0.5 PRIORITY DAMAGE (PACI) [TREE.PRIDAM_PNWRS] Record a code to describe a damage that does not meet the national minimum thresholds for recording damage, but is of special interest in this region. For example, code any evidence of rhinoceros beetle damage on coconut trees. Record 0 if none of the specified damages are present. When Collected: All live tally trees ≥ 1.0 inch DBH Field width: 1 digit Tolerance: No errors Values: Code Description 0 None of the following present 1 Rhinoceros beetle 2 Brown root rot 3 Tinangaja: related to damage agent code 24006 in Appendix D 5 Puccinia psidii 6 Pig, wild boar 7 Cycad Scale 8 Koa Moth 9 Coconut Termite (Neotermes rainbowi)

Item 8.8.0.6 PRIORITY DAMAGE SEVERITY (PACI) [TREE.PRIDAMSEV_PNWRS] Record the amount of area affected by the PRIORITY DAMAGE when Rhinoceros beetle or Puccinia psidii are recorded for PRIORITY DAMAGE. These damages have no minimum threshold. To code DAMAGE SEVERITY for Rhinoceros beetle use the following directions: 1.Draw an imaginary horizontal line just above the coconuts (or where they should be) 2.Count the number of fronds that grow above that line 3.Count the number of fronds in #2 that have been damaged by rhinoceros beetles 4.Divide the number of damaged fronds by the number of fronds counted in # 2. 5.Multiply by 100 Record this number as the severity of rhinoceros beetle damage. If the resulting number is 100, record 99. Chapter 8: When Collected: When PRIORITY DAMAGE = 1 (Rhinoceros beetle) or 5 (Puccinia psidii) Field width: 2 digits Tolerance: +/- 1 Values: When PRIORITY DAMAGE = 1 (Rhinoceros beetle), values = 01 – 99 When PRIORITY DAMAGE = 5 (Puccinia psidii), record the highest level of severity found on the tree (highest numbered code): TREE AND SAPLING DATA 1 Symptoms found, but no rust spores confirmed 2 1-5 spots, yellow or white urediniospores confirmed 3 3-7 large or about 10-15 small spots, with a moderate level of disease; yellow/white urediniospores confirmed 4 Severe disease levels; stems with pustules and/or no leaves 5 Dead apical tips and numerous defoliated tips pg.162 Item 8.8.0.7 ROTTEN/MISSING CULL (CORE 5.13) [TREE.CULL_FLD] Record the percentage of rotten or missing cubic-foot cull for all live tally trees ≥5.0 inches DBH and missing cubic-foot cull on all standing dead tally trees ≥ 5.0 inches DBH. Record the percentage of rotten and missing cubic-foot volume, to the nearest 1 percent. When estimating volume loss (tree cull), only consider the cull on the merchantable bole/portion of the tree, from a 1-foot stump to a 4-inch DOB (diameter outside bark) top. Do not include any cull estimate above ACTUAL LENGTH. Rotten and missing volume loss is often difficult to estimate. Refer to supplemental disease and insect pests field guides and local defect guidelines as an aid in identifying damaging agents and their impact on volume loss. Be alert to such defect indicators as the following: • Cankers or fruiting bodies • Swollen or punky knots • Dull, hollow sound of bole (use regional standards) • Large dead limbs, especially those with frayed ends • Sawdust around the base of the tree If a live tree is physically missing some of its volume (below ACTUAL LENGTH), use the volume estimation tables (Table 8.2: Percentage of tree cubic foot volume distribution by 16-foot logs from tree total length or tree height in logs for a tree of average dimensions) below to estimate the missing percentage. Broken tops occur above ACTUAL LENGTH and are not included in ROTTEN/MISSING CULL (the volume of the broken top is obtained in the office by comparing ACTUAL LENGTH vs. TOTAL LENGTH). If a snag is physically missing some of its volume, use the estimated diameter of the tree when it was alive to aid in calculating the percentage of MISSING CULL of the remaining portion of the snag (i.e., if a snag is 8 feet in length, calculate the percentage of MISSING CULL of the 7-foot section remaining above stump height). • There is an open or closed trunk wound over 10 years old and in contact with ground. • There is an open trunk wound with visible rot or a closed trunk wound >10 years old. • There is a swollen or hollow butt. • There are large rotten knots or limb stubs. • There are conks. Use Table 8.2: as a guideline to estimate the missing portion of a live tree because of cull. It shows the percentage of volume in typical trees of varying number of logs and heights. Use either the tree height in logs (divide the length to a 4-inch top – diameter inside bark [DIB] – by 16) or the measured TOTAL LENGTH to estimate what percentage of volume is estimated in each 16-foot log. Multiply each percentage in that log section times the percentage of rotten or missing volume. Then sum the values to get the total percentage of the tree that is rotten or missing. • Example: A 9-log tree (measured at 160 feet TOTAL LENGTH) has a missing section that is about 1/ 3 of both the second and third logs. Table 8.2: shows the second log has about 18 percent of the volume in the tree, and the third log has about 16 percent of the volume in the tree. • Calculate the percentage of cull in each log and sum to estimate the total percentage of cull for the tree (about 11 percent): TREE DAMAGE TREE : Section 8.8 pg.163 (0.18 X 0.33) + (0.16 X 0.33) = 0.06 + 0.05 = 0.11 Table 8.2: Percentage of tree cubic foot volume distribution by 16-foot logs from tree total length or tree height in logs for a tree of average dimensions Average Tree Log1 Log2 Log3 Log4 Log5 Log6 Log7 Log8 Log9 Log10 Log11 Log12 Total Height in Length LOGS 28 1 100 48 2 70 30 64 3 54 32 14 80 4 43 30 19 8 96 5 36 27 20 12 5 111 6 31 24 20 14 8 3 1277 28221814106 2 1438 25201714118 4 1 1589 24181613118 6 3 1 176 10 22 17 15 13 11 9 7 4 1 1 194 11 20 15 14 12 11 9 7 5 4 2 1 212 12 20 14 13 12 11 9 8 6 4 2 1 0 Record the reason for the ROTTEN/MISSING CULL by recording a DAMAGE AGENT code when appropriate (see Section 8.8, Tree Damage). Note: it may not be possible to record a DAMAGE AGENT if three higher priority DAMAGE AGENTS have already been recorded. When Collected: For all live tally trees ≥ 5.0 inches DBH record ROTTEN/MISSING CULL. For standing dead tally trees ≥ 5.0 inches DBH: record MISSING CULL only. Field width: 2 digits Tolerance: +/- 10 percent Values: 00 to 99 Chapter 8: TREE AND SAPLING DATA pg.164 SUBSECTION 8.8.1 STANDING DEAD OR REMOVED

Item 8.8.1.1 CAUSE OF DEATH (CORE 5.21) [TREE.AGENTCD_PNWRS] Record a CAUSE OF DEATH for all trees that have died or been cut since the previous survey. If CAUSE OF DEATH cannot be reliably estimated, record unknown/not sure/other. When Collected: When SAMPLE KIND = 2: all PREVIOUS TREE STATUS = 1 and PRESENT TREE STATUS = 2 or 3; or PRESENT TREE STATUS = 2 and RECONCILE = 1, 2, or 3

Field width: 2 digits Tolerance: No errors Values: Code Description Core Code (office use only) 10 Insect 10 20 Disease 20 30 Fire 30 40 Animal 40 50 Weather 50 51 Flood 50 52 Wind (direct cause only; use 71 if killed by falling tree) 50 53 Avalanche (snow & ice) 50 54 Landslide (soil & rock) 50 55 Severe and/or extended drought 50 60 Vegetation (suppression, competition, vines/kudzu) 60 70 Unknown/not sure/other – includes death from human activity not 70 related to silvicultural or landclearing activity (accidental, random, etc.). TREE NOTES required. 71 Hit or knocked over by falling object (tree, snag, rock, etc.) 70 80 Silvicultural or landclearing activity (death caused by harvesting 80 or other silvicultural activity, including girdling, chaining, etc., or to landclearing activity).

Item 8.8.1.2 DECAY CLASS (CORE 5.23) [TREE.DECAYCD] Record for each standing dead tally tree, 1.0 inch in diameter and larger, the code indicating the tree’s stage of decay. When standing dead trees have characteristics from more than one DECAY CLASS stage, record the best overall stage of the snag (e.g., new dead with no fine limbs left because it broke below the crown, should be coded as "1"). Rarely will a DECAY CLASS 5 tree be recorded; by the time a dead tree has reached DECAY CLASS 5 it will be unlikely to meet the definition of standing dead. TREE DAMAGE TREE : Section 8.8 pg.165 Snag characteristics are for Douglas-fir. Snags of other species may vary; use this table as a guide. Rate the overall snag DECAY Limbs and Percent bark Sapwood presence CLASS Top Heartwood condition* branches remaining * stage (code) and condition 1 All present Pointed 100 Intact; sound, Sound, hard, original color incipient decay, hard, original color 2 Few limbs, no May be Variable Sloughing; Sound at base, incipient fine branches broken advanced decay, decay in outer edge of fibrous, firm to soft, upper bole, hard, light to light brown reddish brown 3 Limb stubs Broken Variable Sloughing; fibrous, Incipient decay at base, only soft, light to reddish advanced decay brown throughout upper bole, fibrous, hard to firm, reddish brown 4 Few or no Broken Variable Sloughing; cubical, Advanced decay at base, stubs soft, reddish to dark sloughing from upper brown bole, fibrous to cubical, soft, dark reddish brown 5 None Broken Less than 20 Gone Sloughing, cubical, soft, dark brown, OR fibrous, very soft, dark reddish brown, encased in hardened shell

When Collected: All standing dead tally trees ≥ 1.0 inch DBH Field width: 1 digit Tolerance: +/- 1 class Values: 1-5 Chapter 8: TREE AND SAPLING DATA pg.166 SECTION 8.9 CENTROID/SECOND DIAMETER

Item 8.9.0.1 LENGTH TO CENTROID DIAMETER (PACI) [TREE.CENTROID_DIA_HT_PNWRS] The length from the base of the tree to the point where a second stem diameter is measured, which is the point at 30% of the TOTAL LENGTH of the stem (rounded to the nearest 0.5 foot up to 19 feet TOTAL LENGTH, and to the nearest 1.0 foot if greater than or equal to 20 feet TOTAL LENGTH). This field is calculated by the data recorder after TOTAL LENGTH is entered and cannot be updated. Exceptions: For tree ferns (SPCD = 6545, 6546, 6547, 6548, 6549), this field is blank. When collected: All live and standing dead tally trees ≥ 5.0 inches DBH except SPCD = 6545, 6546, 6547, 6548, and 6549 Field width: 4 digits (xxx.y) Tolerance: N/A Values: 001.0 to 999.0 (autopopulated, not updatable)

Item 8.9.0.2 ACTUAL LENGTH TO CENTROID DIAMETER (PACI) [TREE.ACTUAL_CENTROID_DIA_HT_PNWRS] The length from the base of the tree to the point where a second stem diameter is actually measured; usually equal to 30% of the TOTAL LENGTH of the tree stem. This field is calculated by the data recorder after TOTAL LENGTH is entered but can be updated if abnormalities in the stem prevent a normal diameter measurement. Update ACTUAL LENGTH TO CENTROID DIAMETER if diameter is measured at different height. On trees with diameter irregularities (swellings, bumps, depressions, and branches), measure immediately above or below the irregularity at the place it ceases to affect normal stem form. Do not adjust the ACTUAL LENGTH TO CENTROID DIAMETER by more than the tolerance outlined in the table below. Exceptions: For tree ferns (SPCD = 6546, 6547, 6545, 6548, 6549), measure the height to where the fronds emerge from the trunk. For all trees, if 30% of total length is greater than the actual length of the tree, measure the actual length to centroid diameter at the point where the break begins to influence the centroid diameter. When collected: All live and standing dead tally trees ≥ 5.0 inches DBH Field width: 4 digits (xxx.y) Tolerance: LENGTH TO CENTROID DIAMETER +/- 1/2 foot Up to 6 feet +/- 1 foot 7 to 12 feet +/- 2 feet 13 to 18 feet +/- 3 feet 19 to 24 feet +/- 4 feet 25 to 30 feet +/- 5 feet More than 30 feet Values: Values: 001.0 to 999.0 (autopopulated – updatable)

Item 8.9.0.3 CENTROID DIAMETER ON UPPER BOLE (PACI) [TREE.CENTROID_DIA_PNWRS] Measure and record the diameter at the ACTUAL LENGTH TO CENTROID location. For trees with a TOTAL LENGTH of up to 19 feet, record to the nearest 0.1 of an inch. For trees with a TOTAL LENGTH of 20 feet or more, record to the nearest 0.5 of an inch. Exception: For tree ferns (SPCD = 6546, 6547, 6545, 6548, 6549), measure the diameter where the fronds emerge from the trunk. When collected: All live and standing dead tally trees ≥ 5.0 inches DBH where actual length ≥ length to centroid diameter

CENTROID/SECOND DIAMETER Field width: 4 digits (xxx.y) : Tolerance: +/- 0.1 inches for trees with up to 6 feet LENGTH TO CENTROID DIAMETER +/- 1 inches for trees with 7 feet LENGTH TO CENTROID DIAMETER or more Values: 001.0 to 999.9 Section 8.9 pg.167 Item 8.9.0.4 PREVIOUS SECOND DIAMETER ON UPPER BOLE (PACI) [TREE.PREV_UPPER_DIA_PNWRS] This is the second diameter measured on the upper bole during the previous inventory. It has been downloaded from the previous inventory and will not be updatable. This data is provided to help ensure the quality of the second diameter data through comparison. When collected: When SAMPLE KIND = 2: all downloaded live and standing dead tally trees ≥ 5.0 inches in DBH Field width: 3 digits Tolerance: N/A Values: 004 to 999

Item 8.9.0.5 SECOND DIAMETER ON UPPER BOLE (PACI) [TREE.UPPER_DIA_PNWRS] Record the diameter of the main stem on the upper bole at the PREVIOUS LENGTH TO SECOND DIAMETER. The upper bole diameter should have been measured with a relaskop at the point where the main stem tapers to 4 inches or greater. Measure to the nearest inch for all trees ≥ 5.0 inches DBH on the 24-foot radius subplots. When collected: All remeasured live and standing dead tally trees ≥ 5.0 inches DBH Field width: 3 digits Tolerance: +/- 2 inches Values: 004 to 999

Item 8.9.0.6 PREVIOUS LENGTH TO SECOND DIAMETER (PACI) [TREE.PREV_UPPER_DIA_HT_PNWRS] This is the length to the second diameter measured during the previous inventory. It has been downloaded from the previous inventory and will not be updatable. When collected: When SAMPLE KIND = 2: all downloaded live and standing dead tally trees ≥ 5.0 inches in DBH Field width: 3 digits Tolerance: N/A Values: 005 to 400

SECTION 8.10 TREE NOTES

SUBSECTION 8.10.1 TREE NOTES

Item 8.10.1.1 TREE NOTES (CORE 5.27) Chapter 8: [TREE.NOTES] Record notes pertaining to an individual tree as called for to explain or describe another data item. When Collected: All trees, as needed Field width: 2000 characters

Tolerance: N/A TREE AND SAPLING DATA Values: English language words, phrases and numbers pg.168 TREE NOTES TREE : Section 8.10 pg.169 CHAPTER 9 SEEDLING DATA

SECTION 9.1 GENERAL INSTRUCTIONS Regeneration information is obtained by counting live seedlings within the 6.8-foot radius microplot located 90 degrees and 12.0 feet from each subplot center within each of the four subplots. Seedlings are counted in groups by species and condition class. Only count seedlings occurring in accessible forest land condition classes (CONDITION CLASS STATUS = 1), or measurable nonforest condition classes (NONFOREST CONDITION CLASS SAMPLING STATUS =1), using the guidelines listed below. Count all live seedlings that have their base inside the microplot boundary regardless of vigor, damage, or closeness to other trees, but count only one seedling from a clump; a clump is 3 or more live stems that sprouted from a common root base (including stumps).

SUBSECTION 9.1.1 SEEDLING DATA ITEMS

Item 9.1.1.1 SUBPLOT NUMBER (CORE 6.1) [SEEDLING.SUBP] This is a generated code corresponding to the number of the subplot (see Item 6.1.1.1). When Collected: All seedling count records Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Center subplot 2 North subplot 3 Southeast subplot 4 Southwest subplot

Item 9.1.1.2 CONDITION CLASS NUMBER (CORE 6.3) [SEEDLING.CONDID] Use the same procedures described in Chapter 8 to assign the appropriate CONDITION CLASS NUMBER to the seedlings rooted in the respective condition. When Collected: All seedling count records Field width: 1 digit Tolerance: No errors Values: 1-9

Item 9.1.1.3 SPECIES (CORE 6.2) [SEEDLING.SPCD] Record the SPECIES code from the Tree Species List in Appendix B. Use the same procedures described in Item 8.4.1.12. If the species cannot be determined in the field, tally the seedling, but bring branch samples, foliage,

flowers, bark, etc. to the office for identification. If possible, collect samples outside the subplot from similar Chapter 9: specimens and make a note to correct the SPECIES code later. If one or more species cannot be positively identified by local botanists, group all unknown seedlings present on the microplot in one seedling record and use species code 999. List how many unknown species there are with a brief description of each in SEEDLING NOTES. When Collected: All seedling count records SEEDLING DATA Field width: 4 digits Tolerance: No errors for genus, no errors for species Values: Appendix B pg.170 Item 9.1.1.4 SEEDLING COUNT (CORE 6.4) [SEEDLING.TREECOUNT] On each microplot, record the number of live tally seedlings, by SPECIES and CONDITION CLASS When a seedling count of the full microplot will be prohibitively time consuming (over 50 seedlings for a given species), it is acceptable to estimate by counting the number of seedlings on one quarter of the microplot and multiply by four (given that there is only one condition class on the microplot). Repeat for each species. Conifer seedlings must be at least 6.0 inches in length and less than 1.0 inch at DBH to qualify for counting. Hardwood seedlings must be at least 12.0 inches in length and less than 1.0 inch at DBH in order to qualify for counting. General seedling count rules: • Count all live seedlings with their bases inside the microplot boundary regardless of vigor, damage, or closeness to other trees. • Count all live seedlings, regardless of substrate (e.g. suspended logs) or life expectancy. • Multiple “suckers” that originate from the same location, and stump sprouts are considered one seedling. • Measure seedling length, not “height”. Length is measured along the main stem from ground level to the dominant apical leader. • Do not tally or count “layers” (undetached tree branches partially or completely covered by soil and/ or organic materials, usually at the base) as seedlings. • Do not tally any seedlings that sprout from a live tally tree. When Collected: Each accessible forest land condition class (CONDITION CLASS STATUS = 1) on each microplot; and each measurable nonforest land condition class (NONFOREST CONDITION CLASS SAMPLING STATUS =1) on each microplot. Field width: 3 digits Tolerance: No errors for 5 or fewer per species; +/-20% percent over a count of 5 Values: 001 through 999

Item 9.1.1.5 SEEDLING NOTES (PNW) [SEEDLING.NOTES] Record notes to clarify or explain a special situation in the SEEDLING NOTES. When Collected: As needed Field width: 2000 characters Tolerance: N/A Values: Single words and abbreviated sentences GENERAL INSTRUCTIONS : Section 9.1 pg.171 CHAPTER 10 VEGETATION PROFILE The Phase 2 (P2) Vegetation data are collected to describe vegetation structure and dominant species composition for vascular plants. The data collected provide a horizontal and vertical estimation of vegetation located within the sample area and provide information about the most abundant species found on the subplot. Information on the abundance, structure, and species composition of understory plant communities has many uses. It can be used to assess wildlife habitat, biomass, forage availability, grazing potential, vegetation competition with tree growth, fuel loadings from understory vegetation, and potential site productivity. The most abundant species provide information to describe plant communities and to predict associated forest stand characteristics. Accurately representing the species present on a site and monitoring their change in abundance in response to forest development, disturbance, or management is therefore important to a wide variety of users. This information is also used to augment forest ecosystem health assessments from Phase 3 (P3) plots, in terms of vegetation structure and rates of change of community vascular plant composition.

SECTION 10.1 VEGETATION SAMPLING DESIGN The P2 Vegetation Profile includes measurements of Vegetation Structure canopy cover by layer and total aerial canopy cover of each growth habit - with additional data collected on the most abundant species. P2 Vegetation is sampled on accessible condition classes within the 24.0-foot radius subplot. Vegetation data is collected on all accessible forest land and measurable nonforest conditions in the Pacific Islands. If the area of an accessible condition class is less than 100 percent on a subplot, P2 Vegetation measurements are recordedonly on the portion that is in the accessible condition class(es). If multiple accessible condition classes are present on the subplot, separate estimates are made for each accessible condition class on the subplot.The P2 Vegetation Profile is best recorded when all plant species are fully leafed out. However, crews may end up visiting plots early in the season before leaves are fully expanded or late in the season when plants are beginning to senesce. Notes can be added to Item 10.3.1.4, VEGETATION SUBPLOT NOTES (CORE OPTIONAL 8.4.5) indicating unusual phenological conditions.

SECTION 10.2 GENERAL DEFINITIONS Canopy Cover – Canopy cover is defined as the area of ground surface covered by a vertical projection of the canopy of a vascular plant. The canopy is described by a polygon surrounding the outer edges of the foliage (Figure 10.1), without subtracting any normal spaces occurring between the leaves of plants (Daubenmire 19591). Overlapping crowns are not double-counted (visualize the canopy cover collapsed into a 2-dimensional space); the maximum possible canopy cover is the percentage of the subplot area within the accessible condition. All canopy cover estimates are focused on foliage within the sampled accessible condition class(es) within the subplot perimeter (24.0-foot radius, horizontal distance). Canopy cover is estimated for each sampled accessible condition of the subplot. If multiple sampled accessible conditions occur on a subplot, treat the condition boundary as a vertical wall on the plot: plant foliage is included in the condition it is hanging over,

even if the plant is rooted in a different condition. However, the canopy cover value is always estimated as Chapter 10: a percentage of an entire subplot. That is, if the canopy cover within the accessible condition is about equal to a circle with a radius of 5.3 feet, the canopy cover estimate will always be 5 percent, even if only 30 percent of the subplot is in the accessible condition on which the canopy cover is being measured. Canopy cover is collected by height layer and as a total (aerial view) across all layers for each growth habit in Section 10.5 Vegetation Structure. For each layer, examine the canopy cover of each Structure Growth Habit as if the other growth habits and other layers do not exist. If a Structure Growth Habit does not have VEGETATION PROFILE foliage in a layer, enter 0 (do not count tree boles as cover). For total aerial canopy cover by Structure Growth Habit, examine each growth habit individually as if the other growth habits do not exist. Total aerial canopy cover is collected for each most abundantspecies in Section 10.4 Species Composition; examine each species individually, as if the other species do not exist. Canopy cover is estimated to the nearest 1 percent. For Vegetation Structure assessments, canopy cover >0 and ≤1 percent is coded as 1 percent (i.e. trace amounts are coded as 1%). For Species Composition assessments, a species must have at least 3 percent total aerial canopy cover (i.e. do not round total aerial canopy cover <3% up to 3%).

1. Daubenmire. R. 1959. A canopy-coverage method of vegetational analysis. Northwest Science 33(1): 43-64. pg.172 Canopy cover is vertically projected from the outline of the foliage at the time of plot visit. All foliage that is or was alive during the current growing season is included in the cover estimates. Canopy cover from broken tops and stems is included, unless completely detached. Do not ocularly upright leaning trees. See tabulation below for canopy cover to area relationships for a 1/24 acre subplot and Figure 10.3: Example of growth habit by layer and species composition and Figure 10.4 for additional visual calibrations.

Cover Area (ft2) Square length Circle on side (ft) radius (ft) 1% 18 4.3 2.4 3% 54 7.4 4.2 5% 90 9.5 5.4 10% 181 13.4 7.6 15% 271 16.5 9.3 20% 362 19.0 10.7 25% 452 21.3 12.0 50% 905 30.1 17.0

Figure 10.1: Assessing canopy cover.

Growth Habits – P2 Vegetation data are collected by growth habits at each level of detail. In general, growth habits for vascular plants include trees, shrubs/woody vines, forbs, and graminoids. Layer Codes – Structure Growth Habits are assessed by layers in Section 10.5 Vegetation Structure, and one of the following layer codes, see SPECIES VEGETATION LAYER (CORE OPTIONAL 8.6.5), Item 10.4.0.9, pg.181, will be assigned to individual plant species’ SPECIES GROWTH HABITs in Section 10.4 Species Composition. Measure the layer height from ground level; see Figure 10.2 for examples of measuring layer heights on sloping and uneven ground. Layer 1 0 to 2.0 feet Layer 2 2.1 to 6.0 feet Layer 3 6.1 to 16.0 feet Layer 4 Greater than 16 feet GENERAL DEFINITIONS : Section 10.2 pg.173

Figure 10.2: To determine the layer of a plant, measure the height of the layer from the ground.

NRCS PLANTS database – The Natural Resource Conservation Service (NRCS) PLANTS Database

provides standardized information about the vascu lar plants, mosses, liverworts, hornworts, and lichens of Chapter 10: the U.S. and its territories. It includes names, plant symbols, checklists, distributional data, species abstracts, characteristics (including growth habits), images, crop information, automated tools, onward Web links, and references: USDA, NRCS. 2010. The PLANTS Database (http://plants.usda.gov, 1 January 2010). National Plant Data Center, Baton Rouge, LA 70874-4490 USA.

FIA currently uses a stable code set downloaded in January of 2010. VEGETATION PROFILE pg.174

Figure 10.3: Example of growth habit by layer and species composition Table 10.1:Estimation of canopy cover by layer and aerial view of each Structure Growth Habit in Figure 10.3 Vegetation Structure Layer 1 Layer 2 Layer 3 Layer 4 Aerial Growth Habit (0-2.0 ft) (2.1- 6.0 ft) (6.1-16.0 ft) (>16.1 ft) Percent canopy cover Tally tree sp (TT) 005 013 019 008 022 Non-tally tree sp (NT) 000 000 000 000 000 Shrub/Woody Vine (SH) 000 000 000 000 000 Forb (FB) 002 000 000 000 002 Graminoid (GR) 003 000 000 000 003

Table 10.2:Estimation of total aerial canopy cover by species in Figure 10.3 Level of Detail Species Growth Species Code Cover Layer Habit 2 GR FEAR2 003 1 2 SD ABCO 003 1 2 SD POTR5 008 3 3 LT POTR5 008 4 3 LT ABCO 006 3 Note: FRVI, estimated at 2 percent, was not recorded, and ABCO and POTR5 are present as two different SPECIES GROWTH HABITs (seedling/sapling and large tree) with at least 3 percent total aerial cover within the SPECIES GROWTH HABIT on the subplot (large trees LT- are not recorded in the Pacific Islands). GENERAL DEFINITIONS : Section 10.2 pg.175 SECTION 10.3 VEGETATION DATA COLLECTION LOCATION

SUBSECTION 10.3.1 SUBPLOT - LEVEL DATA ITEMS

Item 10.3.1.1 SUBPLOT NUMBER (CORE OPTIONAL 8.4.1) [SUBPLOT.SUBP] Record the code corresponding to the number of the subplot. When collected: On all subplots where P2 vegetation is being sampled (P2 VEGETATION SAMPLING STATUS = 1 or 2) Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Center subplot 2 North subplot 3 Southeast subplot 4 Southwest subplot

Item 10.3.1.2 P2 VEG SUBPLOT SAMPLE STATUS (CORE OPTIONAL 8.4.2) [SUBPLOT.P2VEG_SUBP_STATUS_CD] Record the code to indicate if the subplot was sampled for P2 vegetation. A subplot may be sampled for P2 Vegetation but not have any vascular plants present. If there is any part of an accessible portion of the subplot where other plot measurements are made but all the P2 Vegetation measurements cannot be completed on the subplot (for example, deep snow or water, hazardous weather, time limitation), enter code 2 and do not record any P2 Vegetation measurements. When collected: On all subplots where P2 vegetation is being sampled on accessible forest land (P2 VEGETATION SAMPLING STATUS = 1) and at least one accessible forest land condition (CONDITION CLASS STATUS = 1) exists within the 24-foot radius subplot, or P2 Vegetation is being sampled on all accessible land conditions (P2 VEGETATION SAMPLING STATUS = 2) and at least one accessible forest condition or measurable nonforest condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1) exists within the 24- foot radius subplot. Field width: 1 digit Tolerance: No errors Values: Code Definition 1 Subplot sampled for P2 Vegetation 2 Subplot not sampled for P2 Vegetation

Item 10.3.1.3 VEGETATION NONSAMPLED REASON (CORE OPTIONAL 8.4.3)

[SUBPLOT.P2VEG_SUBP_NONSAMPLE_REASN_CD] Chapter 10: Record the reason why P2 vegetation on a subplot cannot be sampled. When collected: On all subplots where P2 VEG SUBPLOT SAMPLE STATUS = 2 Field width: 2 digits Tolerance: No errors

Values: Code Definition VEGETATION PROFILE 05 Lost data (for office use only) 10 Other (for example, snow or water covering vegetation that is supposed to be sampled). Record an explanation in SUBPLOT NOTES. pg.176 Item 10.3.1.4 VEGETATION SUBPLOT NOTES (CORE OPTIONAL 8.4.5) [P2VEG_SUBP_STRUCTURE.NOTES] Use this field to record notes pertaining to the subplot, and any unusual conditions encountered. When plant specimens are collected, use this field to record a community type description for each subplot sampled for P2 Vegetation. The community description is intended to fully automate the specimen collection process by providing a description of the community in which this plant was found. Some examples of community descriptions are as follows: • 25 year aspen boundary of mature trees. very little slope. a lot of light entry • Acer saccharum floodplain forest. hummock-hollow microtopography. • mature mesic hemlock-hardwood forest adjacent to pond The community type description field is a note that is accessible via Ctrl+E from the P2 Subplot screen for P2VEG. When collected: VEGETATION NONSAMPLED REASON = 10 or as needed Field width: 2000 alphanumeric characters Tolerance: N/A Values: English language words, phrases, and numbers

SECTION 10.4 SPECIES COMPOSITION Identify the (up to) four most abundant species within each SPECIES GROWTH HABIT (tree seedlings and saplings, shrubs/woody vines, forbs, graminoids) that occupy 3 percent or greater total aerial canopy cover on the subplot and within the SPECIES GROWTH HABIT (do not round total aerial canopy cover <3% up to 3%.). Although up to four species per SPECIES GROWTH HABIT can be recorded, crews should not spend more than 5 minutes searching for additional species when less than four species are not readily observable. The methods described assume that only one field crew member per plot is entering P2 Vegetation Profile data. When there are multiple accessible conditions within a subplot, the species must be present at 3 percent or more total aerial canopy cover on the full 24-foot radius subplot and within the SPECIES GROWTH HABIT in order to be recorded. If part of the subplot is a non-sampled condition (e.g., nonforest condition, not sampled for P2 Vegetation because 4.2.1.12 P2 VEGETATION SAMPLING STATUS = 1; or inaccessible condition, not sampled because 5.7.0.4 CONDITION CLASS STATUS = 5), estimate total aerial canopy cover for the full subplot if possible; otherwise assume the species canopy cover is the same on the non- sampled portion. If a species is present at 3 percent total aerial canopy cover or more on the full subplot and within the SPECIES GROWTH HABIT, record SPECIES GROWTH HABIT, SPECIES CANOPY COVER, and SPECIES VEGETATION LAYER separately for each accessible condition. SPECIES SPECIES COMPOSITION : Section 10.4 pg.177 CANOPY COVER values less than 3 percent for a condition are valid as long as the total aerial canopy cover of the species on the full subplot and within the SPECIES GROWTH HABIT is at least 3 percent. See Figure 10.4 for an example of species total aerial canopy cover estimation. See Figure 10.5 for a Species Composition subplot flow.

Figure 10.4: Example of species total aerial canopy cover estimation on a subplot with 2 accessible conditions. See Figure 10.1 for total aerial canopy cover across the subplot. In Figure 10.1, species A, D, and E would be included in estimates of Vegetation Structure by Structure Growth Habit, but not recorded for Species Composition. Note that species with subplot total aerial canopy cover <3% are not recorded, but that SPECIES CANOPY COVER recorded on an accessible condition can be less than 3%. Chapter 10: VEGETATION PROFILE

Figure 10.5: Species Composition subplot flow chart. pg.178 Item 10.4.0.1 SPECIES CODE (CORE OPTIONAL 8.6.2) [P2VEG_PLOT_SPECIES.VEG_FLDSPCD] Record a code for each most abundant (see Section 10.4, Species Composition) vascular plant species (i.e. one of the four most abundant species within each growth habit group (tree seedlings and saplings, shrubs/woody vines, forbs, graminoids) that occupy 3 percent or greater canopy cover on the subplot). Species codes must be the standardized codes in the Natural Resource Conservation Service (NRCS) PLANTS database (currently January 2010 version). Identification to species only is expected. However, if subspecies information is known, enter the appropriate NRCS code. For graminoids, genus and unknown codes are acceptable, but do not lump species of the same genus or unknown code. For example, if several unknown CAREX species are present, only record the individual most abundant species. If a plant cannot be identified quickly and confidently, assign a NRCS PLANTS genus or unknown code (listed below) appropriate to the species. Collect a specimen away from the subplot unless the species is locally sparse or another SPECIMEN NOT COLLECTED REASON CODE (10.4.0.6) applies. A species is “locally sparse” if 5 or fewer plants are present in the entire plot (4 subplots) and immediate surrounding area. A species may be sparse and still meet the criteria for inclusion in species composition, but this will be rare. Acceptable unknown codes Code Common Name 2FERN Fern or Fern Ally 2FORB Forb (herbaceous, not grass nor grasslike) 2FD Forb, dicot 2FM Forb, monocot 2GRAM Graminoid (grass or grasslike) 2GA Grass, annual 2GP Grass, perennial 2GL Grass-like, (sedges and rushes) 2PLANT Plant 2SHRUB Shrub (>0.5m) 2TREE Tree 2VH Vine, herbaceous 2VW Vine, woody

When collected: Species total aerial canopy cover on the full subplot and within a SPECIES GROWTH HABIT is 3 percent or greater Field width: 8 alpha-numeric characters Tolerance: No errors Values: Accepted NRCS species code when the species is known, or an accepted NRCS genus or unknown code when the species is not known

Item 10.4.0.2 UNIQUE SPECIES NUMBER (CORE OPTIONAL 8.6.3) [P2VEG_PLOT_SPECIES.UNIQUE_SP_NBR] When any SPECIES CODE is entered for the first time on a plot, it is assigned UNIQUE SPECIES NUMBER = 1. If more than one unidentified species is discovered that is described by the same genus or acceptable unknown code (see SPECIES CODE above), the next sequential number is assigned. If a recorded unidentified species is encountered again elsewhere on the plot, the field crew records the species with the same genus or unknown code with the same unique species number. When collected: All species recorded Field width: 2 digits

SPECIES COMPOSITION Tolerance: No errors : Values: 1-99, assigned in sequential numbers Section 10.4 pg.179 Item 10.4.0.3 SPECIES CODE TYPE (PNW) [P2VEG_PLOT_SPECIES.SPCD_TYPE] When any SPECIES CODE is entered, it is automatically assigned a SPECIES CODE TYPE determined by its classification into one of the three SPECIES CODE TYPEs; G = Genus, S= Species, U = Unknown. When collected: All SPECIES CODEs Field width: 1 alpha character Tolerance: N/A Values: Code Definition G Genus S Species U Unknown

Item 10.4.0.4 SPECIES CODE STATUS (PNW) [P2VEG_PLOT_SPECIES.SPCD_STATUS] When any SPECIES CODE is entered which is not expected in the applicable state, SPECIES CODE STATUS is automatically assigned; SPECIES CODE STATUS = #. When collected: All SPECIES CODEs not expected in the applicable state Field width: 1 alpha character Tolerance: N/A Values: #

Item 10.4.0.5 SPECIMEN OFFICIALLY COLLECTED (CORE OPTIONAL 8.6.6) [P2VEG_PLOT_SPECIES.SPECIMEN_COLLECTED] Record a code to indicate whether or nota specimen was collected or not for each species, genus or unknown code entered as a new unique species. When collected: All species recorded Field width: 1 digit Tolerance: No errors Values: Code Description 0 No, a specimen was not collected 1 Yes, a specimen was collected

Item 10.4.0.6 P2 SPECIMEN NOT COLLECTED REASON CODE (CORE OPTIONAL 8.6.8) [P2VEG_PLOT_SPECIES.SPECIMEN_NOT_COLLECTED_REASON] Record the code that describes why a specimen has not been collected. When collected: An unknown code or genus code is entered and SPECIMEN OFFICIALLY COLLECTED = 0

Field width: 2 digits Chapter 10: Tolerance: No errors Values: Code Description 01 Species is locally sparse (fewer than 5 individual plants in area of the plot) 02 Species has no mature foliage or reproductive parts present, so is unlikely to be identifiable if collected. 03 Hazardous situation VEGETATION PROFILE 04 Time limitation 05 Wilderness or reserved land where plant collections are not allowed 06 Specimen collected for immediate/local identification 07 Not required by inventory unit 10 Other (explain in notes) pg.180 Item 10.4.0.7 SPECIMEN LABEL NUMBER (CORE OPTIONAL 8.6.7) [P2VEG_PLOT_SPECIES.SPECIMEN_LABEL_NBR] Record the label number for the collected specimen. Pre-numbered labels are provided to each crew by the regional coordinator or auto-generated with the data collection software. When collected: SPECIMEN OFFICIALLY COLLECTED = 1 Field width: 5 digits Tolerance: No errors Values: 1 to 99999, as pre-printed and assigned by region or auto-generated in the PDR

Item 10.4.0.8 SPECIES GROWTH HABIT (CORE OPTIONAL 8.6.1) [P2VEG_SUBPLOT_SPP.GROWTH_HABIT_CD] Record the growth habit of the species. Because many species can exhibit more than one growth habit, it is important to note which growth habit each recorded species is demonstrating on each accessible condition in a subplot (subplot-condition). Tally tree species (all core tree species and any core optional tree species selected by a particular FIA unit) are always recorded as seedling/sapling (SD) SPECIES GROWTH HABITstrees, even when they exhibit a shrub-like growth habit in some environments. Non-tally tree species (tree species not on a particular FIA unit's tree tally list that are woody plants with a single well-defined dominant stem, not supported by other vegetation or structures [not vines], and which are, or are expected to become, greater than 13 feet in height) are recorded as seedling/sapling (SD) SPECIES GROWTH HABITs when they exhibit a tree-like growth habit; and are recorded as shrub (SH) SPECIES GROWTH HABIT when they exhibit a shrub-like growth habit. A species may be recorded with a different SPECIES GROWTH HABIT on a different subplot-condition on the same subplot. If a species has more than one growth habit on an accessible condition in a subplot, record the one SPECIES GROWTH HABIT that is most prevalent within the subplot-condition (except for tally and non-tally tree species). When collected: For each species recorded Field width: 2 alphanumeric characters Tolerance: No errors Values: Code Description SD Seedlings and Saplings: Small trees less than 5 inches DBH, including tally and non-tally tree species. Seedlings of any length are included (i.e., no minimum). Up to four species are recorded if individual species total aerial canopy cover is at least 3percent on the subplot and within the SPECIES GROWTH HABIT. SH Shrubs/Woody Vines: Woody, multiple-stemmed plants of any size, and vines. Most cacti are included in this category. Each FIA region will develop a list of common species that can exhibit either growth habits (according to the NRCS PLANTS database) with regional guidance as to which growth habit the species should normally be assigned, while still allowing species assignments to different growth habits when the species is obviously present in a different growth habit. Up to four species are recorded if individual species total aerial canopy cover is at least 3percent on the subplot and within the SPECIES GROWTH HABIT. FB Forbs Herbaceous, broad-leaved plants; includes non-woody-vines, ferns, and fern allies (does not include mosses and cryptobiotic crusts). Up to four species are recorded if individual species total aerial canopy cover is at least 3 percent o the subplot and within the SPECIES GROWTH HABIT. GR Graminoids: Grasses and grass-like plants (includes rushes and sedges). SPECIES COMPOSITION

: Up to four species are recorded if individual species total aerial canopy cover is at least 3 percent on the subplot and within the SPECIES GROWTH HABIT. Section 10.4 pg.181 Item 10.4.0.9 SPECIES VEGETATION LAYER (CORE OPTIONAL 8.6.5) [P2VEG_SUBPLOT_SPP.LAYER] For each individual species recorded, assign one of the vegetation layers. These layers illustrate the vertical diversity of the most abundant species found on the subplot. Assign each plant species record to only one of the vegetation layers per SPECIES GROWTH HABIT per subplot-condition. If a plant species is found in more than one layer, assign the species to the layer where most of the canopy cover occurs. If a species occupies multiple layers equally, assign the highest of the equally occupied layers. If a plant has a seed head that grows much taller than the rest of the plant, record the layer that the main part of the plant is in, not the top of the seed head. When collected: For each species recorded. Field width: 1 digits Tolerance: No errors Values: Code Description 1 0 to 2.0 feet 2 2.1 to 6.0 feet 3 6.1 to 16.0 feet 4 Greater than 16 feet

Item 10.4.0.10 SPECIES CANOPY COVER (CORE OPTIONAL 8.6.4) [P2VEG_SUBPLOT_SPP.COVER_PCT] For each species recorded, estimate and record the total aerial canopy cover present on the subplot- condition to the nearest 1 percent. Examine each species individually as if the other species do not exist. When recording SPECIES CANOPY COVER for seedlings and saplings (SPECIES GROWTH HABIT = SD), do not include any canopy from trees greater than or equal to 5 inches DBH, regardless of how close to the ground the canopy cover extends. When collected: All species recorded Field width: 3 digits Tolerance: +/- 1 class based on the following canopy cover classes 1%, 2-5%, 6-10%, 11-25%, 26-50%, 51-75%, 76-95%, 96-100% Values: 001-100

Item 10.4.0.11 VEGETATION SPECIES NOTES (CORE OPTIONAL 8.6.9) [P2VEG_PLOT_SPECIES.NOTES] Notes may be entered for any species encountered, but are required for each new species that is not identified. Enter text that describes the species. This text may be used in the specimen label and unknown report. When collected: As needed Field width: Unlimited alphanumeric character field

Tolerance: N/A Chapter 10: Values: English language words, phrases, and numbers VEGETATION PROFILE pg.182 SECTION 10.5 VEGETATION STRUCTURE In this section, use ocular methods to estimate canopy cover by layer and aerial view coverage for each Structure Growth Habit, and record to the nearest percent (canopy cover >0 and <1% is coded as 1%; i.e., trace amounts are coded as 1%). Canopy cover by layer: Estimate the canopy cover in each Structure Growth Habit for each of the four layers. Include Structure Growth Habits with foliage present on the accessible condition and with foliageoverhanging the accessible condition. For each layer canopy cover, examine the canopy cover of each Structure Growth Habit as if the other growth habits and other layers do not exist. Do not double count overlapping crowns within a Structure Growth Habit; visualize the canopy cover within the layer collapsed into a 2- dimensional space. If a Structure Growth Habit does not have foliage in a layer, enter 0 (do not count tree boles as cover). Aerial View Coverage: Determine the total aerial canopy cover by Structure Growth Habit. Examine each Structure Growth Habit individually as if the other growth habits do not exist. Do not double-count overlapping crowns within a Structure Growth Habit (maximum cover = the percentage of the subplot area in the accessible condition). The total aerial canopy cover for a Structure Growth Habit must be equal to or greater than the highest canopy cover recorded for an individual layer in that growth habit, but cannot be greater than the sum of the canopy covers recorded for all the layers in that growth habit. Vegetation Structure Growth Habits: Apply the definitions that follow based on the species and appearance of the plants on the subplot- condition (i.e. do not put the same species in multiple Structure Growth Habits on the same subplot- condition). If a tree species has been selected as a tally tree species by the particular FIA unit, always record that species in the tally tree species growth habit (TT), even if it grows as a shrub in some environments. Woody plants not on the unit’s tally tree species list may have a tree growth habit in some environments, and these should be recorded as non-tally tree species (NT). If the growth habit is shrub in another environment, record that species as a shrub (SH). The definitions (adapted from NRCS PLANTS) are: TT Tally Tree Species (TT): All core tree species and any core-optional tree species selected by a particular FIA unit. Any plant of that species is included, regardless of its shape and regardless of whether it was tallied on the subplot or microplot during tree tally. Seedlings (any length, no minimum), saplings, and mature plants are included. NT Non-tally Tree Species (NT): Tree species not on a particular FIA unit’s tree tally list that are woody plants with a single well-defined, dominant main stem, not supported by other vegetation or structures (not vines), and which are, or are expected to become, greater than 13 feet in height. Seedlings (any length, no minimum), saplings, and mature plants are included. SH Shrubs/Woody Vines (SH): Woody, multiple-stemmed plants of any size, and woody vines. Most cacti are included in this category. FB Forbs (FB): Herbaceous, broad-leaved plants; includes non-woody-vines, ferns, and fern allies (does not include mosses and cryptobiotic crusts). GR Graminoids (GR): Grasses and grass-like plants (includes rushes and sedges). MO Moss/Bryophytes (MO): Small, non-vascular plants - LAYER 1 ONLY.

Item 10.5.0.1 CONDITION CLASS NUMBER (CORE OPTIONAL 8.4.4) [P2VEG_SUBP_STRUCTURE.CONDID] Record the number for the sampled accessible condition class in which the vegetation is found. If multiple accessible sampled conditions occur on the same subplot, data will be collected for each accessible VEGETATION STRUCTURE VEGETATION condition separately. : When collected: Any accessible measured land condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1 when P2 vegetation is being sampled on the subplot (P2 VEG SUBPLOT SAMPLE STATUS =1) Field width: 1 digit Tolerance: No errors Section 10.5 pg.183 Values: 1 to 9

Item 10.5.0.2 TALLY TREE SPECIES COVER LAYER 1 (CORE OPTIONAL 8.5.1) [P2VEG_SUBP_STRUCTURE.TREE_COVER_PCT_LAYER1] Record canopy cover for all tally tree species in layer 1 (0-2.0 feet) to the nearest percent. Canopy cover includes all tally tree species present, regardless of DBH. When Collected: Any accessible measured land condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1 when P2 vegetation is being sampled on the subplot (P2 VEG SUBPLOT SAMPLE STATUS = 1)

Field Width: 3 digits Tolerance: +/- 1 class based on the following canopy cover classes 1%, 2-5%, 6-10%, 11-25%, 26-50%, 51-75%, 76-95%, 96-100% Values: 000-100

Item 10.5.0.3 TALLY TREE SPECIES COVER LAYER 2 (CORE OPTIONAL 8.5.2) [P2VEG_SUBP_STRUCTURE.TREE_COVER_PCT_LAYER2] Record canopy cover for all tally tree species in layer 2 (2.1- 6.0 feet) to the nearest percent. Canopy cover includes all tally tree species present, regardless of DBH. Follow the same procedures as for TALLY TREE SPECIES COVER LAYER 1.

Item 10.5.0.4 TALLY TREE SPECIES COVER LAYER 3 (CORE OPTIONAL 8.5.3) [P2VEG_SUBP_STRUCTURE.TREE_COVER_PCT_LAYER3] Record canopy cover for all tally tree species in layer 3 (6.1- 16.0 feet) to the nearest percent. Canopy cover includes all tally tree species present, regardless of DBH. Follow the same procedures as for TALLY TREE SPECIES COVER LAYER 1.

Item 10.5.0.5 TALLY TREE SPECIES COVER LAYER 4 (CORE OPTIONAL 8.5.4) [P2VEG_SUBP_STRUCTURE.TREE_COVER_PCT_LAYER4] Record canopy cover for all tally tree species in layer 4 (16.1 feet and above) to the nearest percent. Canopy cover includes all tally tree species present, regardless of DBH. Follow the same procedures as for TALLY TREE SPECIES COVER LAYER 1.

Item 10.5.0.6 TALLY TREE SPECIES COVER – AERIAL VIEW (CORE OPTIONAL 8.5.5) [P2VEG_SUBP_STRUCTURE.TREE_COVER_PCT_AERIAL] Record the total aerial canopy cover for all tally tree species over all layers. Canopy cover includes all tally tree species present, regardless of DBH. Follow the same procedures as for TALLY TREE SPECIES COVER LAYER 1, but include all layers.

Item 10.5.0.7 NON-TALLY TREE SPECIES COVER LAYER 1 (CORE OPTIONAL 8.5.6) Chapter 10: [P2VEG_SUBP_STRUCTURE.NONTALLYTREE_COVER_PCT_LAYER1] Record canopy cover for species not on the tally tree species list with tree growth habit in layer 1 (0-2.0 feet) to the nearest percent. Cover includes all non-tally tree species present, regardless of DBH. When Collected: Any accessible measured land condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1 when P2 vegetation is

being sampled on the subplot (P2 VEG SUBPLOT SAMPLE STATUS = 1) VEGETATION PROFILE Field Width: 3 digits Tolerance: +/- 1 class based on the following canopy cover classes 1%, 2-5%, 6-10%, 11-25%, 26-50%, 51-75%, 76-95%, 96-100% Values: 000-100 pg.184 Item 10.5.0.8 NON-TALLY TREE SPECIES COVER LAYER 2 (CORE OPTIONAL 8.5.7) [P2VEG_SUBP_STRUCTURE.NONTALLYTREE_COVER_PCT_LAYER2] Record canopy cover for species not on the tally tree species list with tree growth form in layer 2 (2.1- 6.0 feet) to the nearest percent. Canopy cover includes all non-tally tree species present, regardless of DBH. Follow the same procedures as for NON-TALLY TREE SPECIES COVER LAYER 1.

Item 10.5.0.9 NON-TALLY TREE SPECIES COVER LAYER 3 (CORE OPTIONAL 8.5.8) [P2VEG_SUBP_STRUCTURE.NONTALLYTREE_COVER_PCT_LAYER3] Record canopy cover for species not on the tally tree species list with tree growth form in layer 3 (6.1- 16.0 feet) to the nearest percent. Canopy cover includes all non-tally tree species present, regardless of DBH. Follow the same procedures as for NON-TALLY TREE SPECIES COVER LAYER 1.

Item 10.5.0.10 NON-TALLY TREE SPECIES COVER LAYER 4 (CORE OPTIONAL 8.5.9) [P2VEG_SUBP_STRUCTURE.NONTALLYTREE_COVER_PCT_LAYER4] Record a total aerial canopy cover for species not on the tally tree species list with tree growth habit in layer 4 (16.1 feet and above) to the nearest percent. Canopy cover includes all non-tally tree species present, regardless of DBH. Follow the same procedures as for NON-TALLY TREE SPECIES COVER LAYER 1.

Item 10.5.0.11 NON-TALLY TREE SPECIES COVER – AERIAL VIEW (CORE OPTIONAL 8.5.2) [P2VEG_SUBP_STRUCTURE.NONTALLYTREE_COVER_PCT_AERIAL] Record the total aerial canopy cover for species not on the tally tree species list with tree growth habit over all layers. Canopy cover includes all non-tally tree species present, regardless of DBH. Follow the same procedures as for NON-TALLY TREE SPECIES COVER LAYER 1, but include all layers.

Item 10.5.0.12 SHRUB AND WOODY VINE COVER LAYER 1 (CORE OPTIONAL 8.5.11) [P2VEG_SUBP_STRUCTURE.SHRUB_VINE_COVER_PCT_LAYER1] Record canopy cover for shrubs/woody vines in layer 1 (0-2.0 feet) to the nearest percent. When collected: Any accessible measured land condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1 when P2 vegetation is being sampled on the subplot (P2 VEG SUBPLOT SAMPLE STATUS = 1) Field width: 3 digits Tolerance: +/- 1 class based on the following canopy cover classes 1%, 2-5%, 6-10%, 11-25%, 26-50%, 51-75%, 76-95%, 96-100% Values: 000-100

Item 10.5.0.13 SHRUB AND WOODY VINE COVER LAYER 2 (CORE OPTIONAL 8.5.12) [P2VEG_SUBP_STRUCTURE.SHRUB_VINE_COVER_PCT_LAYER2] Record canopy cover for shrubs/woody vines in layer 2 (2.1-6.0 feet) to the nearest percent. Follow the same procedures as for SHRUB AND WOODY VINE COVER LAYER 1.

Item 10.5.0.14 SHRUB AND WOODY VINE COVER LAYER 3 (CORE OPTIONAL 8.5.13) [P2VEG_SUBP_STRUCTURE.SHRUB_VINE_COVER_PCT_LAYER3] Record canopy cover for shrubs/woody vines in layer 3 (6.1-16.0 feet) to the nearest percent. Follow the same procedures as for SHRUB AND WOODY VINE COVER LAYER 1.

Item 10.5.0.15 SHRUB AND WOODY VINE COVER LAYER 4 (CORE OPTIONAL 8.5.14) [P2VEG_SUBP_STRUCTURE.SHRUB_VINE_COVER_PCT_LAYER4] Record canopy cover for shrubs/woody vines in layer 4 (16.1 feet and above) to the nearest percent. Follow the same procedures as for SHRUB AND WOODY VINE COVER LAYER 1. VEGETATION STRUCTURE VEGETATION : Item 10.5.0.16 SHRUB AND WOODY VINE COVER—AERIAL VIEW (CORE OPTIONAL 8.5.15) [P2VEG_SUBP_STRUCTURE.SHRUB_VINE_COVER_PCT_AERIAL] Record the total aerial canopy cover for the shrub/woody vine growth habit over all layers. Follow the same procedures as for SHRUB AND WOODY VINE COVER LAYER 1, but include all layers. Section 10.5 pg.185 Item 10.5.0.17 FORB COVER LAYER 1 (CORE OPTIONAL 8.5.16) [P2VEG_SUBP_STRUCTURE.FORB_COVER_PCT_LAYER1] Record canopy cover for forbs in layer 1 (0-2.0 feet) to the nearest percent. When collected: Any accessible measured land condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1) when P2 vegetation is being sampled on the subplot (P2 VEG SUBPLOT SAMPLE STATUS = 1) Field width: 3 digits Tolerance: +/- 1 class based on the following canopy cover classes 1%, 2-5%, 6-10%, 11-25%, 26-50%, 51-75%, 76-95%, 96-100% Values: 000-100

Item 10.5.0.18 FORB COVER LAYER 2 (CORE OPTIONAL 8.5.17) [P2VEG_SUBP_STRUCTURE.FORB_COVER_PCT_LAYER2] Record canopy cover for forbs in layer 2 (2.1-6.0 feet) to the nearest percent. Follow the same procedures as for FORB COVER LAYER 1.

Item 10.5.0.19 FORB COVER LAYER 3 (CORE OPTIONAL 8.5.18) [P2VEG_SUBP_STRUCTURE.FORB_COVER_PCT_LAYER3] Record canopy cover for forbs in layer 3 (6.1-16.0 feet) to the nearest percent. Follow the same procedures as for FORB COVER LAYER 1.

Item 10.5.0.20 FORB COVER LAYER 4 (CORE OPTIONAL 8.5.19) [P2VEG_SUBP_STRUCTURE.FORB_COVER_PCT_LAYER4] Record canopy cover for forbs in layer 4 (16.1 feet and above) to the nearest percent. Follow the same procedures as for FORB COVER LAYER 1.

Item 10.5.0.21 FORB COVER—AERIAL VIEW (CORE OPTIONAL 8.5.20) [P2VEG_SUBP_STRUCTURE.FORB_COVER_PCT_AERIAL] Record the total aerial canopy cover for the forb growth habit over all layers. Follow the same procedures as for FORB COVER LAYER, but include all layers.

Item 10.5.0.22 GRAMINOID COVER LAYER 1 (CORE OPTIONAL 8.5.21) [P2VEG_SUBP_STRUCTURE.GRAMINOID_COVER_PCT_LAYER1] Record canopy cover for graminoids in layer 1 (0-2.0 feet) to the nearest percent. When collected: Any accessible measured land condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1) when P2 vegetation is being sampled on the subplot (P2 VEG SUBPLOT SAMPLE STATUS = 1) Field width: 3 digits

Tolerance: +/- 1 class based on the following canopy cover classes 1%, 2-5%, 6-10%, 11-25%, Chapter 10: 26-50%, 51-75%, 76-95%, 96-100% Values: 000-100

Item 10.5.0.23 GRAMINOID COVER LAYER 2 (CORE OPTIONAL 8.5.22) [P2VEG_SUBP_STRUCTURE.GRAMINOID_COVER_PCT_LAYER2]

Record canopy cover for graminoids in layer 2 (2.1-6.0 feet) to the nearest percent. Follow the same VEGETATION PROFILE procedures as for GRAMINOID COVER LAYER 1.

Item 10.5.0.24 GRAMINOID COVER LAYER 3 (CORE OPTIONAL 8.5.23) [P2VEG_SUBP_STRUCTURE.GRAMINOID_COVER_PCT_LAYER3] Record canopy cover for graminoids in layer 3 (6.1-16.0 feet) to the nearest percent. Follow the same procedures as for GRAMINOID COVER LAYER 1. pg.186 Item 10.5.0.25 GRAMINOID COVER LAYER 4 (CORE OPTIONAL 8.5.24) [P2VEG_SUBP_STRUCTURE.GRAMINOID_COVER_PCT_LAYER4] Record canopy cover for graminoids in layer 4 (16.1 feet and above) to the nearest percent. Follow the same procedures as for GRAMINOID COVER LAYER 1.

Item 10.5.0.26 GRAMINOID COVER—AERIAL VIEW (CORE OPTIONAL 8.5.25) [P2VEG_SUBP_STRUCTURE.GRAMINOID_COVER_PCT_AERIAL] Record the total aerial canopy cover for the graminoid growth habit over all layers. Follow the same procedures as for GRAMINOID COVER LAYER 1, but include all layers.

Item 10.5.0.27 MOSS/BRYOPHYTE COVER LAYER 1 (PACI) [P2VEG_SUBP_STRUCTURE.MOSS_BRYO_COVER_PCT_PNWRS] Record the total canopy cover for mosses/bryophytes in layer 1(0-2.0 feet) to the nearest percent. Individual species will not be recorded, only layer 1 will be assessed, and there is no GROWTH HABIT for this data item. This is all that will be collected for Moss/Bryophytes.

When collected: Any accessible measured land condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1) when P2 vegetation is being sampled on the subplot (P2 VEG SUBPLOT SAMPLE STATUS = 1) Field width: 3 digits Tolerance: +/- 1 class based on the following canopy cover classes 1%, 2-5%, 6-10%, 11-25%, 26-50%, 51-75%, 76-95%, 96-100% Values: 000-100 VEGETATION STRUCTURE VEGETATION : Section 10.5 pg.187 CHAPTER 11 INVASIVE PLANTS The objectives of the Phase 2 (P2) invasive plants protocol are to document abundance and monitor changes in abundance of selected species over time. Combined with other plot data and other datasets, this data can be used to predict the future spread of selected species. Invasive plant species are having tremendous economic and ecological impacts on our nation’s forests, and the impacts are increasing over time. Providing accurate, statistically valid estimates of the distribution and abundance of some of the most damaging species will give managers and policy-makers a better understanding of the problem. Each FIA unit, has developed lists of the most important invasive species to monitor on forested lands. Depending on local needs or forest conditions, there may be different lists of species for individual states or portions of states. Invasive species are sampled on accessible forest and measurable nonforest land condition classes. Data will be collected by crew members trained and certified in the invasive plants protocol methods. These crew members are expected to have field guides that allow for unambiguous identification of the plant species on the list, and training in field identification and cover estimation of those species under different conditions. Note: Avoid becoming part of the problem! There is a risk that field crews walking into plot locations could pick up seeds along roadsides or other patches of invasive plants and spread them through the forest and on to the plot. Be aware of the vegetation you are traveling through and consider stopping and removing seeds from boots and clothing before entering uninvaded lands, particularly in remote areas that are rarely visited.

SECTION 11.1 INVASIVE SPECIES SAMPLE DESIGN Phase 2 sampling of invasive species is focused on accessible forest condition classes within the 24.0-foot radius subplot. If the total area of all forest and nonforest land condition classes is less than 100 percent of a subplot, invasive species measurements are done on both the forest and nonforest land condition classes. If multiple forest and/or nonforest condition classes are present on the subplot, separate estimates are made for each condition class on the subplot. Canopy cover is estimated for any listed invasive species present on the measured condition(s) of a subplot, regardless of abundance (i.e., there is no minimum cover threshold for sampling). When crews are not sure about the identification of a plant that might be a listed invasive, they are to collect specimens for later identification.

SECTION 11.2 SPECIES RECORDS

SUBSECTION 11.2.1 INVASIVE SPECIES DATA ITEMS Total cover is estimated on measured conditions on each 24.0-foot radius subplot for every species on the invasive plant list found.

Item 11.2.1.1 SUBPLOT NUMBER (CORE OPTIONAL 9.4) [INVASIVE_SUBPLOT_SPP.SUBP] Chapter 11: A 1-digit code, generated for each record, that corresponds to the number of the subplot. When collected: On all subplots where INVASIVES PLANT SAMPLING STATUS = 1 or 2 Field width: 1 digit Tolerance: No errors

Values: Code Subplot location INVASIVE PLANTS 1 Center subplot 2 North subplot 3 Southeast subplot 4 Southwest subplot pg.188 Item 11.2.1.2 INVASIVE PLANT SUBPLOT SAMPLE STATUS (CORE OPTIONAL 9.5) [SUBPLOT.INVASIVE_SUBP_STATUS_CD] Record the code to indicate whether the subplot was sampled for invasive plants. A subplot may be sampled but not have any invasive plants present. If there is any part of an accessible portion of the subplot where other plot measurements are made but invasive plants can't be assessed (e.g., because of snow, water), enter code 3 and do not record any invasive plant measurements.

When collected: On all subplots where invasive species are being sampled on accessible forest land (INVASIVE PLANT SAMPLING STATUS = 1) and at least one accessible forest land condition (CONDITION CLASS STATUS = 1) exists within the 24-foot radius subplot or invasive species are being sampled on all accessible land conditions (INVASIVE PLANT SAMPLING STATUS = 2) and at least one accessible forest condition or measurable nonforest condition (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1) exists within the 24-foot radius subplot Field width: 1 digit Tolerance: No errors Values: 1 Subplot sampled, invasive plants present 2 Subplot sampled, no invasive plants present 3 Subplot not sampled for invasive plants

Item 11.2.1.3 INVASIVE PLANT NONSAMPLED REASON (CORE OPTIONAL 9.6) [INVASIVE_PLOT_SPECIES.SPECIMEN_NOT_COLLECTED_REASON] Record the reason why a subplot cannot be sampled for invasive plants. When collected: On all subplots where INVASIVE PLANT SUBPLOT SAMPLE STATUS = 3

Field width: 2 digit Tolerance: No errors Values: Code Location 5 Lost Data (office use only) 10 Other (for example, snow or water covering vegetation that is supposed to be sampled, explanation required in SUBPLOT NOTES)

Item 11.2.1.4 INVASIVE PLANT DATA NOTES (CORE OPTIONAL 9.7) [INVASIVE_PLOT_SPECIES.NOTES] Use this field to record any notes about the condition on the subplot, particularly any unusual conditions encountered. When collected: INVASIVE PLANT NONSAMPLED REASON = 10 or as needed Field width: Unlimited alphanumeric character field Tolerance: N/A Values: English language words, phrases, and numbers

Item 11.2.1.5 CONDITION CLASS NUMBER (CORE OPTIONAL 9.8) [INVASIVE_SUBPLOT_SPP.CONDID] Record the number for the measured condition class in which the invasive plant(s) is found. If multiple measured conditions occur on the same subplot, data will be collected for each condition separately. When collected: Any accessible measured land condition within subplots (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1) when invasive plants are being sampled on the subplot (INVASIVE PLANT SUBPLOT SAMPLE STATUS = 1 or 2) SPECIES RECORDS

: Field width: 1 digit Tolerance: No errors Values: 1-9 Section 11.2 pg.189 Item 11.2.1.6 SPECIES CODE (CORE OPTIONAL 9.9) [INVASIVE_PLOT_SPECIES.VEG_FLDSPCD] Record the code for any species listed in the table below (Table 11.1) that is found rooted in or overhanging (and rooted out of) the measured condition within the subplot. For tree species, there are no minimum (or maximum) height limits as are required for seedling counts. All plants that are or were alive in the current growing season are included. Species codes must be the standardized codes in the Natural Resource Conservation Service (NRCS) PLANTS database January 2010 version maintained by the FIA IM group (USDA, NRCS. 2010. The PLANTS database [http://plants.usda.gov/plants]. National Plant Data Center, Baton Rouge, LA 70874-4490). In many of the invasive plant ID guides used by FIA units, some species are grouped together in the ID descriptions, and it may be difficult to distinguish between them with the information provided. In addition, some plants may be hybrids of listed species. Enter the code for the most likely species in the group, or the first one in the group if you are not sure. Table 11.1:Invasive Species List for FSM NRCS Scientific Name Common Name Kosrae Pohnpei Chuuk Yap ANLE4 Antigonon leptopus Chain of love; P: Rohsenpoak sued X CHOD Chromolaena odorata Siam Weed; K: mahsrihsrihk; P: Wisolmaten rehwel; XXXX C: singipwa CLCH4 Clerodendrum chinense Honolulu rose; C: konrata X X X CLQU2 Clerodendrum quadriloculare Bronze leaf; C: Joseph XXX CLHI3 Clidemia hirta Koster's curse; P: Riapenrot X COGR9 Coccinia grandis Ivy-gourd; P: aipikord X COSP8 Costus speciosus Crepe ginger; P: Sinteren wai X DISE7 Dieffenbachia seguine Dumbcane X X EICR Eichhornia crassipes Water hyacinth X FAMO Falcataria moluccana; Albizia, kerosene plant; P: Tuhke karsihn XX X Syn=Paraserianthes falcataria, Molucca albizia HECO11 Hedychium coronarium White ginger; P: sinsea, sinter, sinter oangoahng, X XX sinter pwetepwet, zinzer; C: sinser, sinsér, sinsér, tolon, tunun, turun, zinzer: Y: chabubu, chawiwi, sifif nisepan, trewiwi IMCO2 *Imperata conferta Plume grass X IMCY Imperata cylindrica Cogon grass XX LACA2 Lantana camara Lantana; K: ros fonacni; P: Randana XXXX LELE10 Leucaena leucocephala Tangantangan; K: rohbohtin, tuhngantuhngan; P: X XX tangutang, telengtungd, telentund; Y: ganitnityuwan MAJA5 Mariscus javanicus Javanese flatsedge; C: Nikounoun X MIMI5 Mikania micrantha Mile-a-minute; P: selmwadang XX MIDI8 Mimosa diplotricha Giant sensitive plant, P: kehsapahl, limeirkelik, XX X limemeirlap MIPU8 Mimosa pudica Sensitive plant; P: limemeirkelik, limemeirpong, XXX limemeirpwong; C: nikamour Chapter 11: MOCH2 Momordica charantia Bitter gourd; P: Sel wah katik X PHKA3 *Phragmites karka P: Lirau; C: Wowo; Y: Ucheel X PIAU Piper auritum False kava; P: Sakau likamw X SACCH Saccharum spp. Wild sugarcane; C: Aset, enne X SCAC2 Schefflera actinophylla Octopus tree; P: Tuhkehn kihs X INVASIVE PLANTS SPCA2 Spathodea campanulata African tulip tree; P: Tuhken Africa; C: liapar; Y: XXX ramingobchey SPTR6 Sphagneticola trilobata; Wedelia; K: rosrangrang; P: Dipwongohng; C: X XX Syn=Wedelia trilobata Umuchoch, atiat SYPO Syngonium podophyllum Arrowhead vine; P: selkesingketieu X X THGR3 Thunbergia grandiflora Bengal trumpet vine; P: Iolen Pengkal X Bold X = Priority Species *Native or potentially native Useful reference sites http://manoa.hawaii.edu/botany/plants_of_micronesia/ http://www.hear.org/pier/ pg.190 If a species is suspected of being a listed invasive but cannot be identified quickly and confidently, assign a NRCS PLANTS unknown code. A subset of acceptable unknown codes that can be used is listed below (Table 11.2). Collect a specimen unless the species is locally sparse. A species is “locally sparse” if five or fewer plants are present in the entire plot (4 subplots) and immediate surrounding area. Table 11.2: NRCS Unknown Codes Unknown Code Common Name 2FERN Fern or Fern Ally 2FORB Forb (herbaceous, not grass nor grasslike) 2GRAM Graminoid (grass or grasslike) 2PLANT Plant 2SHRUB Shrub (>.5m) 2SUBS Subshrub (<.5m) 2TREE Tree 2VH Vine, herbaceous 2VW Vine, woody

When collected: Any accessible measured land condition within subplots (CONDITION CLASS STATUS = 1 or NONFOREST CONDITION CLASS SAMPLING STATUS = 1) when invasive plants are being sampled on the subplot (INVASIVE PLANT SUBPLOT SAMPLE STATUS = 1 or 2) Field width: 8 alpha-numeric characters Tolerance: No errors Values: Accepted NRCS species code from the appropriate list for the unit when the species is known, or a NRCS unknown code when the species is not known.

Item 11.2.1.7 UNIQUE SPECIES NUMBER (CORE OPTIONAL 9.10) [INVASIVE_PLOT_SPECIES.UNIQUE_SP_NBR] When any species code is entered for the first time on a plot, the UNIQUE SPECIES NUMBER automatically assigned is “1”. If more than one unidentified species is recorded that is described by the same unknown code, the next sequential number is assigned. If a previously-recorded unidentified species is encountered again elsewhere on the plot, the UNIQUE SPECIES NUMBER that corresponds to the earlier encountered specimen must be entered. For example, an unknown thistle and unknown hawkweed would both be given a species code of “2FORB” but would need to be given different UNIQUE SPECIES NUMBERs when measured. When collected: All species records Field width: 2 digits Tolerance: No errors Values: 1-99, assigned in sequential numbers

Item 11.2.1.8 SPECIES CODE TYPE (PNW) [INVASIVE_PLOT_SPECIES.SPCD_TYPE] When any SPECIES CODE is entered, it is automatically assigned a SPECIES CODE TYPE determined by its classification into one of the three SPECIES CODE TYPEs; G = Genus, S= Species, U = Unknown. When collected: All SPECIES CODEs Field width: 1 alpha character Tolerance: N/A Values: Code Definition G Genus S Species SPECIES RECORDS

: U Unknown Section 11.2 pg.191 Item 11.2.1.9 SPECIES CODE STATUS (PNW) [INVASIVE_PLOT_SPECIES.SPCD_STATUS] When any SPECIES CODE is entered which is not expected in the applicable state, SPECIES CODE STATUS is automatically assigned; SPECIES CODE STATUS = #. When collected: All SPECIES CODEs not expected in the applicable state Field width: 1 alpha character Tolerance: N/A Values: #

Item 11.2.1.10 SPECIES CANOPY COVER (CORE OPTIONAL 9.11) [INVASIVE_SUBPLOT_SPP.COVER_PCT] A rapid canopy cover estimate, to the nearest percent cover, is made for each species for all foliage across all layer heights. All vegetation and plant parts that are or were alive during the current growing season are included in the cover estimates (e.g. brown Canada thistle in late summer is counted, live buds on Russian olive in late fall are used to estimate crown cover). Canopy cover is based on a vertically-projected polygon described by the outline of the foliage, ignoring any normal spaces occurring between the leaves of plants (Daubenmire 1959), and ignoring overlap among multiple layers of a species. Canopy cover estimates are only made for the area within each measured condition—for example, vegetation cover over-hanging a nonforest road condition is not included in the adjacent forested condition estimate. For each species, cover can never exceed 100 percent. Cover is estimated for each measured condition on the subplot separately. However, the foliage cover is always estimated as a percent of an entire subplot. For example, on a subplot with two sampled conditions, a species occurs with a cover equal to a circle with a radius of 7.6 feet on the full subplot, or 10 percent cover. On condition class number 1 it covers an area equal to a circle of 2.4 feet radius and is recorded as 1 percent cover. The remainder, 9 percent cover, is recorded for condition number 2. If the species is only present on condition class number 1 with an area equal to a circle of 2.4-feet radius it is recorded as 1 percent. The proportion of the subplot in each condition does not matter. If cover is greater than 0 but less than 1.5 percent, record as 1 percent cover. For species of moderate cover, it may be easiest to divide the subplots into quarters, estimate canopy cover of each quarter separately, and then add them together. The following area-cover sizes may be useful in developing estimates for an entirely forested subplot:

Subplot radius = 24.0 feet, Subplot area = 1809 ft2 Cover Area (ft2) Length of a side of a Radius of circular square (ft) area (ft) 1% 18 4.3 2.4 3% 54 7.4 4.1 5% 90 9.5 5.3 10% 181 13.4 7.6 20% 362 19 10.7 When collected: All species records

Field width: 3 digits Chapter 11: Tolerance: +/- one class based on the following canopy cover classes: 1%, 2-5%, 6-10%, 11- 25%, 26-50%, 51-75%, 76-95%, and 96-100% Values: 001 to 100

Item 11.2.1.11 INVASIVE SPECIMEN COLLECTED (CORE OPTIONAL 9.13) [INVASIVE_PLOT_SPECIES.SPECIMEN_COLLECTED] INVASIVE PLANTS Record a code to indicate whether or not a specimen was collected for each species genus or unknown code entered as a new unique species. If a plant specimen is not collected, describe the reason it was not collected in INVASIVE PLANT NOTES (Item 11.2.1.13). When collected: All species records when INVASIVE PLANT SPECIMEN COLLECTION RULE = 1 Field width: 1 digit Tolerance: No errors pg.192 Values: Value Description 0 No, a specimen was not officially collected 1 Yes, a specimen was officially collected

Item 11.2.1.12 SPECIMEN LABEL NUMBER (CORE OPTIONAL 9.14) [INVASIVE_PLOT_SPECIES.SPECIMEN_LABEL_NBR] Record the label number for the collected specimen. Numbered labels are provided to each crew. When collected: Where INVASIVE SPECIMEN COLLECTED = 1 Field width: 5 digits Tolerance: No errors Values: 1 to 99999, as pre-printed and assigned by FIA unit.

Item 11.2.1.13 INVASIVE PLANT NOTES (CORE OPTIONAL 9.15) [INVASIVE_PLOT_SPECIES.NOTES] Notes are required for each record with an unknown code. Enter text that describes the species or that explains why it was not collected, if collection was not done. When collected: Required for each record with an unknown code and SPECIMEN LABEL NUMBER Field width: Unlimited alphanumeric character field Tolerance: N/A Values: English language words, phrases, and numbers SPECIES RECORDS : Section 11.2 pg.193 APPENDIX A REFERENCE INFORMATION

SECTION A.1 COUNTY AND STATE FIPS CODES STATECD STATENM COUNTYCD COUNTYNM 15 Hawaii 001 Hawaii(ISLAND-HAWAII) 15 Hawaii 003 Honolulu(ISLAND-OAHU) 15 Hawaii 005 Kalawao(ISLAND-MOLOKAI-not the county) 15 Hawaii 007 Kauai(ISLANDS-KAUAI and NIHAU) 15 Hawaii 009 Maui(ISLANDS-MAUI, KAHOOLAWE, LANAI, and most of MOLOKAI) 60 American Samoa 20 Manu'a (ISLANDS – TAU, OFU, OLOSEGA) 60 American Samoa 30 Rose 60 American Samoa 40 Swains 60 American Samoa 10 Tutuila East 60 American Samoa 50 Tutuila West 64 Federated States of Micronesia 2 Chuuk 64 Federated States of Micronesia 5 Kosrae 64 Federated States of Micronesia 40 Pohnpei 64 Federated States of Micronesia 60 Yap 66 Guam 10 Guam 68 Marshall Islands 7 Ailinginae 68 Marshall Islands 10 Ailinglaplap 68 Marshall Islands 30 Ailuk 68 Marshall Islands 40 Arno 68 Marshall Islands 50 Aur 68 Marshall Islands 60 Bikar 68 Marshall Islands 70 Bikini 68 Marshall Islands 73 Bokak 68 Marshall Islands 80 Ebon 68 Marshall Islands 90 Enewetak 68 Marshall Islands 100 Erikub 68 Marshall Islands 110 Jabat 68 Marshall Islands 120 Jaluit 68 Marshall Islands 130 Jemo 68 Marshall Islands 140 Kili 68 Marshall Islands 150 Kwajalein Appendix A: 68 Marshall Islands 160 Lae 68 Marshall Islands 170 Lib 68 Marshall Islands 180 Likiep 68 Marshall Islands 190 Majuro 68 Marshall Islands 300 Maloelap 68 Marshall Islands 310 Mejit

68 Marshall Islands 320 Mili REFERENCE INFORMATION 68 Marshall Islands 330 Namorik 68 Marshall Islands 340 Namu 68 Marshall Islands 350 Rongelap 68 Marshall Islands 360 Rongrik 68 Marshall Islands 385 Toke 68 Marshall Islands 390 Ujae 68 Marshall Islands 400 Ujelang 68 Marshall Islands 410 Utrik 68 Marshall Islands 420 Wotho 68 Marshall Islands 430 Wotje pg.194 STATECD STATENM COUNTYCD COUNTYNM 69 Commonwealth of the Northern Mariana 85 Northern Islands (ISLANDS Agrihan, Alamagan, Anatahan, Asuncion, Farallon de Medinilla, Farallon de Pajaros, Guguan, Maug, Pagan, Sarigan) 69 Commonwealth of the Northern Mariana 100 Rota 69 Commonwealth of the Northern Mariana 110 Saipan 69 Commonwealth of the Northern Mariana 120 Tinian 70 Palau 2 Aimeliik 70 Palau 4 Airai 70 Palau 10 Angaur 70 Palau 50 Hatoboheit 70 Palau 100 Kayangel 70 Palau 150 Koror 70 Palau 212 Melekeok 70 Palau 214 Ngaraard 70 Palau 218 Ngarchelong 70 Palau 222 Ngardmau 70 Palau 224 Ngatpang 70 Palau 226 Ngchesar 70 Palau 227 Ngernmlengui 70 Palau 228 Ngiwal 70 Palau 350 Peleliu 70 Palau 370 Sonsorol

ATE FIPS CODES ATE

COUNTY AND ST

:

A.1

Section pg.195 SECTION A.2 FIPS CODES, UTM ZONES, AND DECLINATIONS (FIP Code) State or Territory Latitude Longitude UTM Previous New Island º ' " º ' " Zone Declination Declination (64) Federated States of Micronesia (002) Chuuk Atoll Etal 05 34 05 N 153 35 10 E 56 6 deg. East Losap 06 53 44 N 152 44 01 E 56 5 deg. East Lukunor 05 30 22 N 153 47 58 E 56 6 deg. East Murilo 08 41 16 N 152 20 26 E 56 5 deg. East Nama 06 59 48 N 152 34 39 E 56 5 deg. East Namoluk 05 55 34 N 153 06 41 E 56 5 deg. East Namonuito 08 59 27 N 150 07 22 E 55 4 deg. East Nomwin 08 25 47 N 151 44 28 E 56 5 deg. East Pulap 07 38 41 N 149 25 15 E 55 4 deg. East Pulusuk 06 41 31 N 149 18 51 E 55 4 deg. East Puluwat 07 21 26 N 149 12 01 E 55 4 deg. East Satawan 05 19 30 N 153 44 12 E 55 6 deg. East Truk/Chuuk Lagoon 07 25 08 N 151 43 55 E 56 5 deg. East 4

(005) Kosrae Kosrae 05 18 58 N 162 59 02 E 58 8 deg. East 7

(040) Pohnpei Nukuoro 03 50 42 N 155 00 04 E 56 6 deg. East Oroluk 07 37 44 N 155 09 41 E 56 6 deg. East Pakin 07 04 53 N 157 48 20 E 57 6 deg. East Pingelap 06 12 47 N 160 41 56 E 57 7 deg. East Pohnpei 06 57 45 N 158 13 58 E 57 6 deg. East 6 Dekehtik 6 Na 6 Parem 6 Takaieu/Dehpehk 6

(060) Yap Appendix A: Eauripik 06 41 14 N 143 04 55 E 55 3 deg. East Elato 07 31 00 N 146 11 08 E 55 3 deg. East Fais 09 45 54 N 140 31 20 E 54 2 deg. East Faraulep 08 35 52 N 144 33 25 E 54 3 deg. East Gaferut 09 13 58 N 145 22 59 E 55 3 deg. East Ifilik 07 15 23 N 144 27 03 E 55 3 deg. East REFERENCE INFORMATION Lamotrek 07 27 40 N 146 23 33 E 55 4 deg. East Ngulu 08 29 37 N 137 21 48 E 55 1 deg. East Olimarao 07 42 09 N 145 52 46 E 55 3 deg. East Satawal 07 21 29 N 147 02 08 E 55 4 deg. East Pikelot 08 05 16 N 147 38 08 E 55 4 deg. East Sorol 08 08 00 N 140 24 39 E 54 2 deg. East Ulithi 09 57 41 N 139 36 13 E 54 1 deg. East West Fayu 08 05 21 N 146 44 28 E 54 3 deg. East Woleai 07 22 32 N 143 54 50 E 54 3 deg. East Yap 09 31 46 N 134 36 00 E 54 1 deg. East 1 pg.196 (FIP Code) State or Territory Latitude Longitude UTM Previous New Island º ' " º ' " Zone Declination Declination Rumung 0.4

(70) Palau (2) Aimelik 53 1 deg. East (10) Angaur 53 1 deg. East (100) Kayangel 53 1 deg. East (150) Koror 53 1 deg. East (212) Melekeok 53 1 deg. East (214) Ngaraard 53 1 deg. East (218) Ngarchelong 53 1 deg. East (222) Ngardmau 53 1 deg. East (224) Ngatpang 53 1 deg. East (226) Ngchesar 53 1 deg. East (227) Ngernmlengui 53 1 deg. East (228) Ngiwal 53 1 deg. East (350) Sonsorol 53 1 deg. East

TIONS

AND DECLINA

FIPS CODES, UTM ZONES,

:

A.2

Section pg.197 SECTION A.3 SLOPE CORRECTION TABLE Percent Expansion Expansion Factor -----Slope Distance----- Factor Reciprocal 24.0 feet 100 feet 10 1.005 0.995 24.1 100.5 15 1.01 0.99 24.3 101.1 20 1.02 0.98 24.5 102.0 25 1.03 0.97 24.7 103.1 30 1.04 0.96 25.1 104.4

35 1.06 0.94 25.4 105.9 40 1.08 0.93 25.8 107.7 45 1.10 0.91 26.3 109.7 50 1.12 0.89 26.8 111.8 55 1.14 0.88 27.4 114.1

60 1.17 0.86 28.0 116.6 65 1.19 0.84 28.6 119.3 70 1.22 0.82 29.3 122.1 75 1.25 0.80 30.0 125.0 80 1.28 0.78 30.7 128.1

85 1.31 0.76 31.5 131.2 90 1.35 0.74 32.3 134.5 95 1.38 0.72 33.1 137.9 100 1.41 0.71 33.9 141.4 105 1.45 0.69 34.8 145.0

110 1.49 0.67 35.7 148.7 115 1.52 0.66 36.6 152.4 120 1.56 0.64 37.5 156.2 125 1.60 0.62 38.4 160.1 130 1.64 0.61 39.4 164.0

135 1.68 0.60 40.3 168.0 140 1.72 0.58 41.3 172.0

145 1.76 0.57 42.3 176.1 Appendix A: 150 1.80 0.55 43.3 180.3 155 1.84 0.54 44.3 184.5 REFERENCE INFORMATION pg.198 SECTION A.4 METRIC EQUIVALENTS AND AIDS Length 1 inch = 2.54 centimeters (cm.) 0.1 feet = 3.048 centimeters (cm.) 1 foot = 0.3048 meter (m.) 1 mile = 1.609 kilometers (km.) 1 centimeter (cm.) = .03 foot (ft.) 1 meter (m.) = 3.2808 feet (ft.) 1 mile = 5280 feet Area 1 acre = 0.4 hectare (ha.) (approximately) 5 acres = 2 hectares (ha.) (approximately) 1,000 acres = 404.7 hectares (ha.) 1 hectare = 2.471 acres (ac.) 2.5 hectares = 6 acres (ac.) (approximately) Volume 1,000 cubic feet = 28.3 meters (m3) 1 cubic foot per acre = 0.07 cubic meter per hectare (m3/ha) Condition Class Minimum Area 0.4 hectares (1 acre) = 4,000 square meters = 40 meters x 100 meters = 35 meter radius circle 1 acre = 118 foot radius circle = 209 feet x 209 feet = 43,560 square feet Metric System - Length 1 meter = 10 decimeters (dm.) 1 meter = 100 centimeters (cm.) 1 meter = 1,000 millimeters (mm.) .001 meters = 1 millimeter .01 meters = 1 centimeter .1 meters = 1 decimeter 1 meter = 1 meter 10 meters = 1 decameter 100 meters = 1 hectometer 1,000 meters = 1 kilometer Photo Scales Scale Length on Photo Length on Ground 1:15,840 1 mm. 15.8 meters 1:24,000 1 mm. 24.0 meters 1:31,680 1 mm. 31.7 meters

AIDS 1:40,000 1 mm. 40.0 meters 1:15,840 1 inch 1,320 feet 0.1 inch 132 feet .05 inch (1/20) 66 feet 1:24,000 1 inch 2,000 feet 0.1 inch 200 feet .05 inch (1/20) 100 feet 1:31,680 1 inch 2,640 feet 0.1 inch 264 feet .05 inch (1/20) 132 feet 1:40,000 1 inch 3,333 feet 0.1 inch 333 feet .05 inch (1/20) 166 feet

METRIC EQUIVALENTS AND

:

A.4

Section pg.199 APPENDIX B TREE SPECIES LIST Code NRCS Code Scientific Name 6044 AGPO4 Aglaia ponapensis 6046 AGSA9 Aglaia samoensis SECTION B.1 TREE SPECIES LIST 6047 AGLAI Aglaia spp. 6048 AICO2 Aidia cochinchinensis Code NRCS Code Scientific Name 6049 AIRA2 Aidia racemosa 50 CUPRE Cupressus spp. 6051 AILAN Ailanthus spp. 100 PINUS Pinus spp. 6057 ALCH2 Albizia chinensis 299 2TE Tree conifer 6058 ALFA5 Albizia falcataria 300 ACACI Acacia spp. 6059 ALLE Albizia lebbeck 303 ACFA Acacia farnesiana 6061 ALRE Albizia retusa 341 AIAL Ailanthus altissima 6062 ALSA10 Albizia saponaria 350 ALNUS Alnus spp. 6063 ALBIZ Albizia spp. 460 CELTI Celtis spp. 6069 ALMA Alectryon macrococcus 510 EUCAL Eucalyptus spp. 6072 ALSA12 Elattostachys falcata 511 EUGL Eucalyptus globulus 6073 ALECT Alectryon spp. 512 EUCA2 Eucalyptus camaldulensis 6075 ALMO2 Aleurites moluccana 513 EUGR12 Eucalyptus grandis 6077 ALEUR Aleurites spp. 514 EURO2 Eucalyptus robusta 6078 ALTR11 Aleurites trisperma 520 DIOSP Diospyros spp. 6083 ALLOP Allophylus spp. 541 FRAM2 Fraxinus americana 6084 ALTE13 Allophylus triphyllus 681 MOAL Morus alba 6085 ALTI2 Allophylus timorensis 712 PATO2 Paulownia tomentosa 6086 ALNE2 Alnus nepalensis 715 MAPA28 Maytenus palauica 6088 ALCA21 Alphitonia carolinensis 718 OSTR Osmoxylon truncatum 6089 ALPO3 Alphitonia ponderosa 720 PERSE Persea spp. 6090 ALPHI Alphitonia spp. 755 PROSO Prosopis spp. 6091 ALZI Alphitonia zizyphoides 764 PRPE3 Prunus persica 6095 ALMA16 Alstonia macrophylla 800 QUERC Quercus spp. 6096 ALPA22 Alstonia pacifica 855 CASUA Casuarina spp. 6097 ALSTO Alstonia spp. 856 CAGL11 Casuarina glauca 6107 ANOC Anacardium occidentale 858 CICA Cinnamomum camphora 6109 ANIN13 Anacolosa insularis 860 CITRU2 Citrus spp. 6118 ANEV Angiopteris evecta 865 COSE2 Cordia sebestena 6124 ANCH9 Annona cherimola 885 MAIN3 Mangifera indica 6128 ANMU2 Annona muricata 887 PIPI3 Piscidia piscipula 6129 ANRE Annona reticulata 888 SCAC2 Schefflera actinophylla 6130 ANNON Annona spp. 896 SYCU Syzygium cumini 6131 ANSQ Annona squamosa 897 TAIN2 Tamarindus indica 6135 ANKA Antidesma kapuae 908 CONU Cocos nucifera 6137 ANBU3 Antidesma bunius 940 SWMA2 Swietenia mahagoni 6138 ANKU3 Antidesma kusaiense 974 ULPU Ulmus pumila 6139 ANPL2 Antidesma platyphyllum 987 COER2 Conocarpus erectus 6142 ANPO8 Antidesma ponapense 989 RHMA2 Rhizophora mangle 6143 ANPU2 Antidesma pulvinatum 992 MEQU Melaleuca quinquenervia 6144 ANSP14 Antidesma sphaerocarpum 993 MEAZ Melia azedarach

6145 ANTID Antidesma spp. Appendix B: 994 TRSE6 Triadica sebifera 6148 ANIN2 Antirhea inconspicua 998 2TB Tree hardwood 6154 ARAN15 Araucaria angustifolia 999 2TREE Tree unknown 6155 ARCO32 Araucaria columnaris 5261 BAGA2 Bactris gasipaes 6156 AREX4 Araucaria excelsa 6002 ACAN10 Acacia aneura 6157 ARHE12 Araucaria heterophylla 6003 ACAU Acacia auriculiformis 6158 ARAUC2 Araucaria spp. 6004 ACCO Acacia confusa 6159 ARAL Archontophoenix alexandrae

6006 ACKO Acacia koa TREE SPECIES LIST 6161 AREL4 Ardisia elliptica 6007 ACKO2 Acacia koaia 6166 ARDIS Ardisia spp. 6009 ACMA12 Acacia mangium 6167 ARCA41 Areca catechu 6010 ACME80 Acacia mearnsii 6169 ARPI6 Arenga pinnata 6011 ACME Acacia melanoxylon 6171 ARAL7 Artocarpus altilis 6014 ACPA81 Acacia parramattensis 6173 ARHE2 Artocarpus heterophyllus 6028 ADPA Adenanthera pavonina 6175 ARMA28 Artocarpus mariannensis 6029 ADENA Adenanthera spp. 6176 ARNO Artocarpus nobilis 6042 AGMA14 Aglaia mariannensis 6177 AROD2 Artocarpus odoratissimus 6043 AGPA19 Aglaia palauensis 6178 ARTOC Artocarpus spp. pg.200 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 6179 ARBR11 Arytera brackenridgei 6367 CABR42 Campnosperma brevipetiolata 6181 ASDI14 Ascarina diffusa 6370 CAOD Cananga odorata 6185 ASNA10 Astronidium navigatorum 6372 CAHA39 Canarium mafoa 6186 ASPA37 Astronidium palauense 6373 CAHI14 Canarium hirsutum 6187 ASPI11 Astronidium pickeringii 6374 CAIN42 Canarium indicum 6188 ASSA23 Astronidium samoense 6375 CAOV7 Canarium ovatum 6189 ASTRO4 Astronidium spp. 6377 CANAR2 Canarium spp. 6190 ASSU31 Astronidium subcordata 6378 CAVI26 Canarium vitiense 6193 ATRA2 Atuna racemosa 6381 CAME35 Psydrax merrillii 6197 AVBI Averrhoa bilimbi 6395 CAPA23 Carica papaya 6198 AVCA Averrhoa carambola 6396 CARIC Carica spp. 6199 AVERR Averrhoa spp. 6397 CARE22 Carmona retusa 6200 AVAL Avicennia marina subsp. Marina 6398 CARMO Carmona spp. 6203 AVMA3 Avicennia marina 6399 CAMI36 Caryota mitis 6205 AVICE Avicennia spp. 6400 CARYO Caryota spp. 6206 AZIN2 Azadirachta indica 6401 CAUR3 Caryota urens 6208 BATA Baccaurea taitensis 6405 CACA28 Casearia cauliflora 6213 BAPA8 Badusa palauensis 6408 CASEA Casearia spp. 6215 BAMBU Bambusa spp. 6415 CAFI3 Cassia fistula 6216 BAVU2 Bambusa vulgaris 6417 CAGR11 Cassia grandis 6220 BAAS3 Barringtonia asiatica 6418 CAJA3 Cassia javanica 6221 BARA5 Barringtonia racemosa 6420 CASI4 Cassia siamea 6222 BASA9 Barringtonia samoensis 6422 CASSI Cassia spp. 6223 BARRI Barringtonia spp. 6430 CAEL5 Castilla elastica 6225 BABI6 Bauhinia binata 6433 CACU8 Casuarina cunninghamiana 6226 BAMO2 Bauhinia monandra 6434 CAEQ Casuarina equisetifolia 6230 BAUHI Bauhinia spp. 6437 CALI8 Casuarina litorea 6236 BIJA Bischofia javanica 6439 CALO8 Catalpa longissima 6237 BISCH Bischofia spp. 6441 CEOB Cecropia obtusifolia 6238 BIOR Bixa orellana 6444 CECRO Cecropia spp. 6239 BIXA Bixa spp. 6445 CEOD Cedrela odorata 6242 BOBR3 Bobea brevipes 6449 CEPE2 Ceiba pentandra 6243 BOEL3 Bobea elatior 6452 CEPA6 Celtis paniculata 6244 BOSA2 Bobea sandwicensis 6459 CEDI12 Cerbera dilatata 6245 BOBEA Bobea spp. 6460 CEFL2 Cerbera floribunda 6246 BOTI Bobea timonioides 6461 CEMA20 Cerbera manghas 6247 BOFR2 Bocconia frutescens 6462 CEOD2 Cerbera odollam 6248 BOCCO Bocconia spp. 6463 CERBE Cerbera spp. 6250 BOVI7 Boehmeria virgata 6469 CEHI3 Cereus hildmannianus 6260 BRAR6 Broussaisia arguta 6470 CEREU Cereus spp. 6262 BRPA4 Broussonetia papyrifera 6472 CETA2 Ceriops tagal 6264 BRCA12 Brugmansia candida 6473 CEAU2 Cestrum aurantiacum 6267 BRPA15 Bruguiera parviflora 6474 CEDI6 Cestrum diurnum 6268 BRSE11 Bruguiera gymnorhiza 6477 CENO Cestrum nocturnum 6269 BRUGU Bruguiera spp. 6478 CESTR Cestrum spp. 6277 BUEN Buchanania engleriana 6482 CHAT2 Chamaesyce atrococca 6278 BUME4 Buchanania merrillii 6483 CHCE Chamaesyce celastroides 6279 BUPA16 Buchanania palawensis 6492 CHHE3 Chamaesyce herbstii 6280 BUCHA Buchanania spp. 6493 CHKU Chamaesyce kuwaleana 6286 BUAS Buddleja asiatica 6494 CHOL3 Chamaesyce olowaluana 6299 BURI3 Burckella richii 6495 CHRO2 Chamaesyce rockii 6318 CAKA5 Caesalpinia kavaiensis 6496 CHAMA15 Chamaesyce spp. 6320 CASA28 Caesalpinia sappan 6497 CHDE3 Charpentiera densiflora 6329 CAVI23 Callistemon viminalis 6498 CHEL Charpentiera elliptica 6341 CAIN4 Calophyllum inophyllum 6499 CHOB2 Charpentiera obovata

REE SPECIES LIST 6342 CANE31 Calophyllum neo-ebudicum 6500 CHOV2 Charpentiera ovata

T

: 6343 CAPE15 Calophyllum pelewense 6503 CHARP Charpentiera spp. 6344 CASO12 Calophyllum soulattri 6504 CHTO3 Charpentiera tomentosa 6345 CALOP Calophyllum spp. 6507 CHDO3 Cheirodendron dominii 6346 CAPR Calotropis procera 6508 CHFA Cheirodendron fauriei 6347 CALOT Calotropis spp. 6509 CHFO4 Cheirodendron forbesii 6366 CABR18 Campnosperma brevipetiolatum 6510 CHPL Cheirodendron platyphyllum

Section B.1 pg.201 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 6513 CHEIR Cheirodendron spp. 6627 CLSI3 Clermontia singuliflora 6514 CHTR2 Cheirodendron trigynum 6628 CLERM Clermontia spp. 6517 CHOA Chenopodium oahuense 6629 CLTU2 Clermontia tuberculata 6518 CHENO Chenopodium spp. 6630 CLWA2 Clermontia waimeae 6525 CHVI22 Chionanthus vitiensis 6632 CLCH4 Clerodendrum chinense 6541 CHCA10 Chrysophyllum cainito 6633 CLGL2 Clerodendrum glabrum 6542 CHOL Chrysophyllum oliviforme 6634 CLIN Clerodendrum indicum 6545 CIHE7 Cibotium heleniae 6635 CLMA24 Clerodendrum macrostegium 6546 CICH Cibotium chamissoi 6636 CLERO2 Clerodendrum spp. 6547 CIGL Cibotium glaucum 6645 CLCA21 Clinostigma carolinense 6548 CIME8 Cibotium menziesii 6651 CLRO Clusia rosea 6549 CIBOT Cibotium spp. 6652 CLUSI Clusia spp. 6552 CIPU Cinchona pubescens 6670 COUV Coccoloba uvifera 6553 CINCH Cinchona spp. 6681 COCOS Cocos spp. 6555 CIBU2 Cinnamomum burmannii 6684 COAR2 Coffea arabica 6557 CICA2 Cinnamomum carolinense 6685 CORO8 Coffea robusta 6561 CIPE6 Cinnamomum pedatinervium 6686 COLI8 Coffea liberica 6562 CISE2 Cinnamomum sessilifolium 6687 COFFE Coffea spp. 6563 CINNA2 Cinnamomum spp. 6691 COSC13 Colona scabra 6564 CIVE2 Cinnamomum verum 6693 COAR3 Colubrina arborescens 6565 CICA8 Citharexylum caudatum 6694 COAS3 Colubrina asiatica 6567 CISP3 Citharexylum spinosum 6697 COOP Colubrina oppositifolia 6568 CITHA Citharexylum spp. 6699 COLUB Colubrina spp. 6570 CISA2 Citronella samoensis 6702 COTE15 Combretum tetralophum 6572 CIAU Citrus aurantifolia 6703 COBA17 Commersonia bartramia 6574 CIAU8 Citrus aurantium 6709 CONOC Conocarpus spp. 6575 CILI5 Citrus limon 6716 COFO2 Coprosma foliosa 6577 CISI3 Citrus sinensis 6717 COKA Coprosma kauensis 6578 CIGR Citrus grandis 6718 COLO4 Coprosma longifolia 6579 CIHY2 Citrus hystrix 6719 COMO3 Coprosma montana 6580 CIMA10 Citrus macroptera 6720 COOC3 Coprosma ochracea 6581 CIMA5 Citrus maxima 6721 COPU8 Coprosma pubens 6582 CIME3 Citrus medica 6722 CORH Coprosma rhynchocarpa 6583 CIMI3 Citrus mitis 6724 COPRO Coprosma spp. 6584 CIRE3 Citrus reticulata 6726 COWA4 Coprosma waimeae 6586 CLCA15 Claoxylon carolinianum 6729 COAS6 Cordia aspera 6588 CLFA6 Claoxylon fallax 6731 COCO5 Cordia collococca 6589 CLLO5 Claoxylon longiracemosum 6733 CODI18 Cordia dichotoma 6590 CLMA25 Claoxylon marianum 6736 COMI6 Cordia micronesica 6591 CLSA Claoxylon sandwicense 6741 CORDI Cordia spp. 6592 CLAOX Claoxylon spp. 6742 COSU2 Cordia subcordata 6593 CLCA18 Cleistanthus carolinianus 6744 COFR2 Cordyline fruticosa 6594 CLIN8 Cleistanthus insularis 6745 CORDY2 Cordyline spp. 6595 CLEIS5 Cleistanthus spp. 6749 COCA48 Corymbia calophylla

6596 CLLE3 Clermontia leptoclada 6750 COCI4 Corymbia citriodora Appendix B: 6597 CLAR4 Clermontia arborescens 6751 COFI7 Corymbia ficifolia 6601 CLCL Clermontia clermontioides 6752 COGU4 Corymbia gummifera 6604 CLDR2 Clermontia drepanomorpha 6754 COLA6 Corynocarpus laevigatus 6605 CLFA Clermontia fauriei 6755 CORYN2 Corynocarpus spp. 6606 CLGR3 Clermontia grandiflora 6756 COGU3 Couroupita guianensis 6610 CLHA4 Clermontia hawaiiensis 6758 CRRE12 Crateva religiosa 6611 CLKA Clermontia kakeana 6760 CRAL11 Crescentia alata 6612 CLKO Clermontia kohalae 6769 CRBI9 Crossostylis biflora TREE SPECIES LIST 6613 CLLI3 Clermontia lindseyana 6771 CRLO3 Crotalaria longirostrata 6614 CLMI3 Clermontia micrantha 6772 CROTO Croton sp. 6615 CLMO5 Clermontia montis-loa 6778 CROR5 Cryptocarya oreophila 6616 CLOB2 Clermontia oblongifolia 6779 CREL8 Cryptocarya elegans 6620 CLPA6 Clermontia pallida 6781 CRMA8 Cryptocarya mannii 6621 CLPA8 Clermontia parviflora 6783 CRYPT2 Cryptocarya spp. 6622 CLPE2 Clermontia peleana 6784 CRTU4 Cryptocarya turbinata 6625 CLPE3 Clermontia persicifolia 6786 CRJA3 Cryptomeria japonica 6626 CLPY2 Clermontia pyrularia 6787 CRYPT4 Cryptomeria spp. pg.202 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 6795 CULU2 Cupressus lusitanica 6903 DIEB2 Diospyros ebenum 6796 CUSE2 Cupressus sempervirens 6904 DIEL3 Diospyros elliptica 6800 CYAC4 Cyanea aculeatiflora 6905 DIFE5 Diospyros ferrea 6801 CYAR10 Cyanea arborea 6906 DIHI4 Diospyros hillebrandii 6802 CYFI6 Cyanea fissa 6907 DIKA2 Diospyros kaki 6805 CYFL4 Cyanea floribunda 6910 DISA16 Diospyros samoensis 6806 CYGI5 Cyanea giffardii 6911 DISA10 Diospyros sandwicensis 6807 CYHA6 Cyanea hamatiflora 6921 DIPO Discocalyx ponapensis 6810 CYHA7 Cyanea hardyi 6927 DOVI Dodonaea viscosa 6811 CYHO6 Cyanea horrida 6928 DOSP3 Dolichandrone spathacea 6812 CYKU3 Cyanea kuhihewa 6930 DOHE2 Dovyalis hebecarpa 6813 CYKU Cyanea kunthiana 6933 DRMU2 Dracaena multiflora 6814 CYLE5 Cyanea leptostegia 6934 DRRE6 Dracaena reflexa 6815 CYMA10 Cyanea macrostegia 6936 DRDO3 Drypetes dolichocarpa 6818 CYMA14 Cyanea marksii 6941 DRNI3 Drypetes nitida 6819 CYPI4 Cyanea pilosa 6942 DRYPE Drypetes spp. 6822 CYPO5 Cyanea pohaku 6943 DRVI5 Drypetes vitiensis 6823 CYPR8 Cyanea procera 6944 DUDE Dubautia demissifolia 6824 CYPY Cyanea pycnocarpa 6945 DUFA2 Dubautia fallax 6825 CYQU Cyanea quercifolia 6946 DUMO2 Dubautia montana 6826 CYRI4 Cyanea rivularis 6947 DUAR Dubautia arborea 6827 CYSO2 Cyanea solenocalyx 6948 DUKN Dubautia knudsenii 6828 CYANE Cyanea spp. 6952 DUMI Dubautia microcephala 6829 CYST5 Cyanea stictophylla 6953 DUPL Dubautia plantaginea 6830 CYSU8 Cyanea superba 6957 DURE2 Dubautia reticulata 6833 CYTR6 Cyanea tritomantha 6958 DUBAU Dubautia spp. 6837 CYCO18 Cyathea cooperi 6961 DUER Duranta erecta 6838 CYDE16 Cyathea decurrens 6965 DUZI Durio zibethinus 6840 CYLU5 Cyathea lunulata 6966 DYLU Dypsis lutescens 6841 CYME12 Cyathea medullaris 6968 DYHU2 Dysoxylum huntii 6842 CYNI7 Cyathea nigricans 6969 DYMA Dysoxylum maota 6844 CYPO11 Cyathea ponapeana 6970 DYSA Dysoxylum samoense 6847 CYATH Cyathea spp. 6971 DYSOX Dysoxylum spp. 6849 CYTR11 Cyathea truncata 6973 ELGU Elaeis guineensis 6852 CYCI3 Cycas micronesica 6975 ELBI Elaeocarpus bifidus 6853 CYRE11 Cycas revoluta 6976 ELCA20 Elaeocarpus carolinensis 6854 CYCAS Cycas spp. 6977 ELFL6 Elaeocarpus floridanus 6855 CYBA7 Cyclophyllum barbatum 6978 ELGR Elaeocarpus graeffei 6858 CYRA8 Cynometra ramiflora 6979 ELGR6 Elaeocarpus grandis 6859 CYYO Cynometra yokotae 6980 ELJO Elaeocarpus joga 6860 CYBE3 Cyphomandra betacea 6981 ELKE Elaeocarpus kerstingianus 6863 CYPU13 Cyrtandra pulchella 6982 ELKU Elaeocarpus kusanoi 6864 CYRA3 Cyrtandra ramosissima 6983 ELAEO Elaeocarpus spp. 6865 CYGI3 Cyrtandra giffardii 6984 ELTO4 Elaeocarpus tonganus 6866 CYRTA Cyrtandra spp. 6985 ELUL Elaeocarpus ulianus 6868 DARE6 Dalbergia retusa 6990 ELFA3 Elattostachys falcata 6870 DATU Dalbergia tucurensis 6992 ELDU3 Eleocharis dulcis 6875 DEFA Delissea fallax 6994 ENEL Endiandra elaeocarpa 6876 DELA4 Delissea laciniata 6996 ENCY Enterolobium cyclocarpum 6877 DENI Delissea niihauensis 6998 ERJA3 Eriobotrya japonica 6880 DEPA9 Delissea parviflora 6999 ERIOB Eriobotrya spp. 6881 DELIS Delissea spp. 7008 ERFU2 Erythrina fusca 6882 DEUN2 Delissea undulata 7012 ERSA11 Erythrina sandwicensis 6883 DERE Delonix regia 7013 ERYTH Erythrina spp. 6884 DELON Delonix spp. 7014 ERSU15 Erythrina subumbrans

REE SPECIES LIST 6885 DEHA5 Dendrocnide harveyi 7016 ERVAO Erythrina variegata

T

: 6886 DELA13 Dendrocnide latifolia 7017 ERAC10 Erythrospermum acuminatissimum 6887 DENDR16 Dendrocnide spp. 7025 EUBO2 Eucalyptus botryoides 6891 DIAL13 Dictyosperma album 7026 EUBR2 Eucalyptus bridgesiana 6898 DISU11 Dillenia suffruticosa 7028 EUCI80 Eucalyptus cinerea 6900 DIBL3 Diospyros blancoi 7030 EUCL Eucalyptus cladocalyx 6902 DIDI9 Diospyros discolor 7031 EUCO3 Eucalyptus cornuta

Section B.1 pg.203 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 7032 EUCR Eucalyptus crebra 7163 FIOB3 Ficus obliqua 7033 EUDE Eucalyptus deanei 7165 FIPR2 Ficus prolixa 7034 EUDE2 Eucalyptus deglupta 7167 FIRU4 Ficus rubiginosa 7038 EUGO Eucalyptus gomphocephala 7168 FISA Ficus saffordii 7039 EUGO2 Eucalyptus goniocalyx 7169 FISC3 Ficus scabra 7041 EUHE12 Eucalyptus hemiphloia 7171 FICUS Ficus spp. 7044 EUMA4 Eucalyptus marginata 7175 FITH2 Ficus thonningii 7045 EUMI Eucalyptus microcorys 7176 FITI2 Ficus tinctoria 7046 EUPA Eucalyptus paniculata 7178 FIUN Ficus uniauriculata 7047 EUPI Eucalyptus pilularis 7179 FIVI3 Ficus virens 7048 EURA4 Eucalyptus raveretiana 7180 FICH Finschia chloroxantha 7049 EURE2 Eucalyptus resinifera 7182 FISP3 Fitchia speciosa 7051 EURU2 Eucalyptus rudis 7186 FLRU2 Flacourtia rukam 7052 EUSA17 Eucalyptus salicifolia 7188 FLBR Flindersia brayleyana 7053 EUSA Eucalyptus saligna 7191 FLFL4 Flueggea flexuosa 7054 EUSI2 Eucalyptus sideroxylon 7192 FLNE Flueggea neowawraea 7056 EUTE Eucalyptus tereticornis 7193 FLUEG Flueggea spp. 7057 EUVI Eucalyptus viminalis 7200 FRCA12 Frangula californica 7059 EUAQ Eugenia aquea 7206 FRUH Fraxinus uhdei 7065 EUCA16 Eugenia caryophyllus 7207 FUBO Fuchsia boliviana 7078 EUJA4 Eugenia javanica 7208 FUPA2 Fuchsia paniculata 7079 EUKO Eugenia koolauensis 7209 FUCHS Fuchsia spp. 7082 EUMA5 Eugenia malaccensis 7210 FUEL Funtumia elastica 7086 EUNI2 Eugenia nitida 7211 PEAM3 Persea americana 7087 EUPA3 Eugenia palauensis 7214 GAMA10 Garcinia mangostana 7088 EUPA28 Eugenia palumbis 7215 GAMA8 Garcinia matsudai 7091 EURE7 Eugenia reinwardtiana 7216 GAMY Garcinia myrtifolia 7096 EUGEN Eugenia spp. 7217 GAPO4 Garcinia ponapensis 7099 SYST3 Syzygium stelechanthum 7219 GARU3 Garcinia rumiyo 7101 EUSU9 Eugenia suzukii 7221 GARCI Garcinia spp. 7102 EUTH4 Eugenia thompsonii 7224 GABR Gardenia brighamii 7104 EUUN2 Eugenia uniflora 7225 GAMA6 Gardenia mannii 7110 EUHA2 Euphorbia haeleeleana 7226 GARE Gardenia remyi 7112 EUNE4 Euphorbia neriifolia 7227 GARDE Gardenia spp. 7114 EUPU9 Euphorbia pulcherrima 7228 GATA Gardenia taitensis 7115 EUPHO Euphorbia spp. 7229 GAFL8 Garuga floribunda 7116 EUTI Euphorbia tirucalli 7233 GERU3 Geniostoma rupestre 7117 EULO7 Euphoria longana 7241 GICE2 Gironniera celtidifolia 7119 EUSA6 Eurya sandwicensis 7245 GLSE2 Gliricidia sepium 7120 EURYA Eurya spp. 7247 GLCU Glochidion cuspidatum 7123 EUHO5 Euodia hortensis 7248 GLMA9 Glochidion marianum 7124 EUNI8 Euodia nitida 7249 GLRA4 Glochidion ramiflorum 7125 EUPA29 Euodia palawensis 7250 GLOCH Glochidion spp. 7126 EUPO15 Euodia ponapensis 7251 GMEL Gmelina elliptica

7127 EUODI Euodia spp. 7252 GMPA Gmelina palawensis Appendix B: 7128 EUTR13 Euodia trichantha 7253 GMELI Gmelina spp. 7129 EXAG Excoecaria agallocha 7254 GNGN Gnetum gnemon 7131 EXGA Exocarpos gaudichaudii 7260 GOCA2 Goniothalamus carolinensis 7132 EXOCA Exocarpos spp. 7262 GOBA Gossypium barbadense 7133 EXPO2 Exorrhiza ponapensis 7264 GOHIH2 Gossypium hirsutum 7141 FABE Fagraea berteroana 7272 GRBA Grevillea banksii 7142 FAKS Fagraea ksid 7273 GRRO Grevillea robusta 7143 FAGRA Fagraea spp. 7274 GREVI Grevillea spp. TREE SPECIES LIST 7144 FAMO Falcataria moluccana 7275 GRCR4 Grewia crenata 7145 FALCA2 Falcataria spp. 7279 GUOF Guaiacum officinale 7150 FIBE Ficus benjamina 7282 GUMA4 Guamia mariannae 7151 FICA Ficus carica 7307 GUSP3 Guettarda speciosa 7152 FICO2 Ficus copiosa 7311 GURH Guioa rhoifolia 7155 FIEL Ficus elastica 7312 GUIOA Guioa spp. 7156 FIGO Ficus godeffroyi 7313 GUPA Gulubia palauensis 7160 FIMI2 Ficus microcarpa 7319 GYAM2 Gyrocarpus americanus 7162 FINO3 Ficus nota 7321 HACA2 Haematoxylum campechianum pg.204 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 7332 HAFL Haplolobus floribundus 7475 INFA3 Inocarpus fagifer 7334 HAAR4 Harpullia arborea 7477 INBI Intsia bijuga 7338 HEDE14 Hedycarya denticulata 7482 JAMI Jacaranda mimosifolia 7340 HEDYC2 Hedycarya spp. 7483 JACAR Jacaranda spp. 7343 HEFO5 Hedyotis fosbergii 7491 JACU2 Jatropha curcas 7344 HEHI8 Hedyotis hillebrandii 7494 JATRO Jatropha spp. 7345 HEDYO2 Hedyotis spp. 7497 KAPA4 Kayea pacifica 7346 HETE21 Hedyotis terminalis 7506 KLHO Kleinhovia hospita 7349 HEPO4 Heliocarpus popayanensis 7509 KOCO2 Kokia cookei 7350 HELIO Heliocarpus spp. 7510 KODR Kokia drynarioides 7359 HELI9 Heritiera littoralis 7511 KOKA Kokia kauaiensis 7360 HELO12 Heritiera longipetiolata 7512 KOLA2 Kokia lanceolata 7362 HERIT2 Heritiera spp. 7513 KOKIA Kokia spp. 7363 HEMO13 Hernandia moerenhoutiana 7516 KUER Kunzea ericoides 7364 HENY Hernandia nymphaeifolia 7517 KUNZE Kunzea spp. 7365 HEOV4 Hernandia ovigera 7518 LAFA2 Labordia fagraeoidea 7366 HESO Hernandia sonora 7519 LAHE2 Labordia hedyosmifolia 7367 HERNA Hernandia spp. 7520 LAHI5 Labordia hirtella 7368 HELA27 Hernandia labyrinthica 7521 LAKA Labordia kaalae 7370 HEAR9 Hesperomannia arborescens 7522 LALY2 Labordia lydgatei 7371 HEAR10 Hesperomannia arbuscula 7523 LABOR Labordia spp. 7372 HELY Hesperomannia lydgatei 7524 LATI2 Labordia tinifolia 7373 HESPE8 Hesperomannia spp. 7528 LATR4 Labordia triflora 7374 HEAR5 Heteromeles arbutifolia 7529 LAWA3 Labordia waiolani 7376 HETER5 Heteromeles spp. 7533 LASP Lagerstroemia speciosa 7377 HEEL9 Heterospathe elata 7539 LADO2 Lansium domesticum 7381 HEBR8 Hevea brasiliensis 7543 LALO Latania loddigesii 7384 HIBO2 Hibiscadelphus bombycinus 7558 LEMO20 Leptospermum morrisonii 7385 HICR Hibiscadelphus crucibracteatus 7559 LEPE23 Leptospermum petersonii 7386 HIDI Hibiscadelphus distans 7560 LEPO22 Leptospermum polygalifolim 7387 HIGI Hibiscadelphus giffardianus 7561 LESC2 Leptospermum scoparium 7388 HIHU Hibiscadelphus hualalaiensis 7562 LEPTO4 Leptospermum spp. 7389 HIPU2 Hibiscadelphus puakuahiwi 7564 LEIN31 Leucaena insularum 7390 HIBIS Hibiscadelphus spp. 7564 SCFO2 Schleinitzia fosbergii 7391 HIWI Hibiscadelphus wilderianus 7565 LELE10 Leucaena leucocephala 7392 HIWO Hibiscadelphus woodii 7566 LEUCA Leucaena spp. 7393 HIAR Hibiscus arnottianus 7575 LISI Ligustrum sinense 7397 HIBR Hibiscus brackenridgei 7576 LIGUS2 Ligustrum spp. 7401 HICA6 Hibiscus calyphyllus 7583 LICH4 Litchi chinensis 7402 HICL Hibiscus clayi 7586 LISA8 Litsea samoensis 7403 HIEL Hibiscus elatus 7587 LITSE Litsea spp. 7404 HIKO Hibiscus kokio 7588 LICH3 Livistona chinensis 7407 HIMA5 Hibiscus macrophyllus 7595 LOCO9 Lophostemon confertus 7408 HIMU3 Hibiscus mutabilis 7598 LUNE4 Lucuma nervosa 7411 HIBIS2 Hibiscus spp. 7602 LULI8 Lumnitzera littorea 7412 HITI Hibiscus tiliaceus 7614 MAIN8 Macadamia integrifolia 7413 HIWA Hibiscus waimeae 7616 MACAD Macadamia spp. 7424 HOWH Homalium whitmeeanum 7617 MATE16 Macadamia tetraphylla 7427 HOAM2 Horsfieldia amklaal 7618 MACA25 Macaranga carolinensis 7428 HONO2 Horsfieldia novoguineensis 7619 MAGR Macaranga grayana 7429 HONU2 Horsfieldia nunu 7620 MAHA9 Macaranga harveyana 7430 HOPA10 Horsfieldia palauensis 7621 MAMA28 Macaranga mappa 7431 HORSF2 Horsfieldia spp. 7623 MACAR Macaranga spp. 7440 HYLOC Hylocereus spp. 7625 MAST7 Macaranga stipulosa 7441 HYUN3 Hylocereus undatus 7626 MATA3 Macaranga tanarius

REE SPECIES LIST 7442 HYCO Hymenaea courbaril 7627 MATH3 Macaranga thompsonii

T

: 7448 HYCA11 Hypericum canariense 7638 MAPA6 Mallotus palauensis 7453 ILAN Ilex anomala 7639 MAPH4 Mallotus philippensis 7454 ILAQ80 Ilex aquifolium 7641 MALLO Mallotus spp. 7460 ILPA3 Ilex paraguariensis 7642 MATI4 Mallotus tiliifolius 7464 ILEX Ilex spp. 7653 MAGL12 Mammea glauca 7472 INED Inga edulis 7654 MAOD2 Mammea odorata

Section B.1 pg.205 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 7655 MAMME Mammea spp. 7759 MESA9 Melicytus samoensis 7657 MAMI3 Mangifera minor 7766 MEAR16 Melochia aristata 7658 MAOD Mangifera odorata 7767 MELOC Melochia spp. 7659 MANGI Mangifera spp. 7769 MEUM3 Melochia umbellata 7660 MAGL5 Manihot carthaginensis subsp. Glaziovii 7770 MEVIC4 Melochia villosissima var compacta 7661 MANIH Manihot spp. 7771 MEVIV Melochia villosissima var villosissima 7664 MADI14 Manilkara dissecta 7774 MEME12 Merrilliodendron megacarpum 7666 MAHO5 Manilkara hoshinoi 7776 MEMA16 Meryta macrophylla 7671 MANIL Manilkara spp. 7777 MESE11 Meryta senfftiana 7672 MAUD Manilkara udoido 7778 MERYT Meryta spp. 7674 MAZA Manilkara zapota 7781 MEPOP2 Metrosideros collina 7679 MACO Maranthes corymbosa 7782 MEMA4 Metrosideros macropus 7680 MAFR11 Marattia fraxinea 7783 MEPO5 Metrosideros polymorpha 7700 MATH4 Maytenus thompsonii 7792 MERU2 Metrosideros rugosa 7704 MECA21 Medusanthera carolinensis 7793 METRO Metrosideros spp. 7705 MESA11 Medusanthera samoensis 7794 METR5 Metrosideros tremuloides 7706 MEDUS2 Medusanthera spp. 7795 MEWA Metrosideros waialealae 7709 MELAL Melaleuca spp. 7798 MEAM4 Metroxylon amicarum 7710 MEMU10 Melanolepis multiglandulosa 7799 MESA7 Metroxylon sagu 7712 MECA9 Melastoma candidum 7800 METRO2 Metroxylon spp. 7713 MESA3 Melastoma sanguineum 7801 MICH4 Michelia champaca 7716 MELIA Melia spp. 7805 MICA20 Miconia calvescens 7719 MEAN3 Melicope anisata 7824 MIMI23 Micromelum minutum 7720 MEBA2 Melicope balloui 7831 MIPI9 Millettia pinnata 7721 MEBA3 Melicope barbigera 7835 MIEL4 Mimusops elengi 7722 MECH2 Melicope christophersenii 7841 MOHI Montanoa hibiscifolia 7723 MECI6 Melicope cinerea 7842 MONTA Montanoa spp. 7724 MECL Melicope clusiifolia 7845 MOCE2 Morella cerifera 7725 MECR5 Melicope cruciata 7846 MOFA Morella faya 7726 MEEL2 Melicope elliptica 7848 MOREL2 Morella spp. 7727 MEHA7 Melicope haleakalae 7849 MOCI3 Morinda citrifolia 7728 MEHA3 Melicope haupuensis 7850 MOLA12 Morinda latibractea 7729 MEHA4 Melicope hawaiensis 7851 MOPE2 Morinda pedunculata 7730 MEHI6 Melicope hiiakae 7852 MORIN Morinda spp. 7731 MEHO2 Melicope hosakae 7853 MOTR Morinda trimera 7732 MEKA2 Melicope kaalaensis 7855 MOOL Moringa oleifera 7733 MEKN Melicope knudsenii 7865 MURA3 Munroidendron racemosum 7734 MEMA6 Melicope macropus 7867 MUCA4 Muntingia calabura 7735 MEMA7 Melicope makahae 7868 MUNTI Muntingia spp. 7736 MEMO6 Melicope molokaiensis 7870 MUKO Murraya koenigii 7737 MEMU4 Melicope mucronulata 7872 MUPA3 Musa paradisiaca 7738 MEOA Melicope oahuensis 7873 MUCO8 Musa coccinea 7739 MEOB4 Melicope obovata 7874 MUNA Musa nana 7740 MEOR4 Melicope orbicularis 7875 MUSA Musa sapientum

7741 MEOV Melicope ovalis 7876 MUSA2 Musa spp. Appendix B: 7742 MEOV2 Melicope ovata 7877 MUTE6 Musa textilis 7743 MEPA6 Melicope pallida 7878 MUTI Musa tikap 7744 MEPA7 Melicope paniculata 7879 MUTR2 Musa troglodytarum 7745 MEPE9 Melicope peduncularis 7880 MUFR3 Mussaenda frondosa 7746 MEPS Melicope pseudoanisata 7881 MURA5 Mussaenda raiateensis 7747 MEPU4 Melicope puberula 7882 MUSSA Mussaenda spp. 7748 MEQU3 Melicope quadrangularis 7883 MYSA Myoporum sandwicense 7749 MERA2 Melicope radiata 7884 MYOPO Myoporum spp. TREE SPECIES LIST 7750 MERE8 Melicope latifolia 7892 MYRCI Myrcia spp. 7751 MERO3 Melicope rotundifolia 7894 MYCA9 Myrciaria cauliflora 7752 MESA4 Melicope saint-johnii 7899 MYRU3 Myrica rubra 7753 MESA5 Melicope sandwicensis 7900 MYRIC Myrica spp. 7754 MELIC3 Melicope spp. 7902 MYHY2 Myristica hypargyraea 7755 MEVO Melicope volcanica 7903 MYIN3 Myristica insularis 7756 MEWA2 Melicope waialealae 7904 MYRIS Myristica spp. 7757 MEWA4 Melicope wawraeana 7906 MYIN4 Myristica inutilis 7758 MEZA Melicope zahlbruckneri 7910 MYAL4 Myrsine alyxifolia pg.206 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 7913 MYDE2 Myrsine degeneri 8056 PACO3 Pandanus compressus 7914 MYEM Myrsine emarginata 8057 PACY10 Pandanus cylindricus 7915 MYFE Myrsine fernseei 8058 PADI2 Pandanus dilatatus 7916 MYFO Myrsine fosbergii 8059 PADI29 Pandanus divergens 7918 MYHE3 Myrsine helleri 8060 PADU3 Pandanus dubius 7919 MYKA Myrsine kauaiensis 8061 PADU4 Pandanus duriocarpus 7920 MYKN Myrsine knudsenii 8062 PAEN Pandanus enchabiensis 7921 MYLA3 Myrsine lanaiensis 8063 PAFI Pandanus fischerianus 7922 MYLE2 Myrsine lessertiana 8064 PAFR7 Pandanus fragrans 7923 MYME2 Myrsine mezii 8065 PAHO6 Pandanus hosinoi 7924 MYPE3 Myrsine petiolata 8066 PAJA3 Pandanus jaluitensis 7925 MYPU2 Myrsine pukooensis 8067 PAKA2 Pandanus kanehirae 7926 MYSA2 Myrsine sandwicensis 8068 PAKO2 Pandanus korrensis 7927 MYRSI Myrsine spp. 8069 PALA3 Pandanus lakatwa 7928 MYWA Myrsine wawraea 8070 PALA4 Pandanus laticanaliculatus 7942 NEOP Ochrosia oppositifolia 8071 PAMA3 Pandanus macrocephalus 7948 NEFO2 Neonauclea forsteri 8072 PAMA32 Pandanus macrojeanneretia 7952 NELA7 Nephelium lappaceum 8073 PAME18 Pandanus menne 7953 NERA3 Nephelium ramboutan-ake 8074 PAKA Palaquium karrak 7954 NEME5 Neraudia melastomifolia 8075 PAOD2 Pandanus odontoides 7958 NEPO Nesoluma polynesicum 8076 PAPA38 Pandanus palawensis 7960 NESA2 Nestegis sandwicensis 8077 PAPA39 Pandanus patina 7961 NESTE Nestegis spp. 8078 PAPE Pandanus peliliuensis 7962 NECE Neuburgia celebica 8079 PAPO2 Pandanus ponapensis 7964 NIGL Nicotiana glauca 8080 PAPU18 Pandanus pulposus 7965 NICOT Nicotiana spp. 8081 PARE2 Pandanus rectangulatus 7966 NOBR2 Nothocestrum breviflorum 8082 PARE19 Pandanus reineckei 7967 NOLA Nothocestrum latifolium 8083 PARO2 Pandanus rotundatus 7968 NOLO Nothocestrum longifolium 8084 PANDA Pandanus spp. 7969 NOPE Nothocestrum peltatum 8085 PATE2 Pandanus tectorius 7970 NOTHO3 Nothocestrum spp. 8086 PATO6 Pandanus tolotomensis 7971 NOHU Nototrichium humile 8087 PATR Pandanus trukensis 7972 NOSA Nototrichium sandwicense 8088 PAUT Pandanus utilis 7974 NYFR2 Nypa fruticans 8090 PAVA4 Pandanus variegatus 7977 OCHNA Ochna spp. 8091 PAED4 Pangium edule 7978 OCTH Ochna thomasiana 8092 PAOB7 Pandanus obliquus 7980 OCPY Ochroma pyramidale 8103 PAIN20 Parinari insularum 7982 OCCO Ochrosia compta 8104 PALA5 Parinari laurina 7983 OCHA Ochrosia haleakalae 8105 PARIN Parinari spp. 7984 OCKA Ochrosia kauaiensis 8107 PAKO5 Parkia korom 7985 OCKI Ochrosia kilaueaensis 8108 PAPA2 Parkia parvifoliola 7986 OCHRO2 Ochrosia spp. 8111 PAAC3 Parkinsonia aculeata 7987 OCMA2 Ochrosia mariannensis 8112 PARKI2 Parkinsonia spp. 8000 OLNE Oleandra neriiformis 8121 PEPT3 Peltophorum pterocarpum 8004 OLEU Olea europaea 8123 PEAC6 Pemphis acidula 8007 OLEA Olea spp. 8129 PEMO13 Pericopsis mooniana 8008 HOAC4 Homalanthus acuminatus 8131 PESA3 Perrottetia sandwicensis 8009 HONU3 Homalanthus nutans 8146 PHNI11 Phaleria nisidai 8010 HOMAL6 Homalanthus spp. 8151 PHCA13 Phoenix canariensis 8011 OPPA4 Ophiorrhiza palauensis 8152 PHDA4 Phoenix dactylifera 8013 OPCO4 Opuntia cochenillifera 8153 PHOEN2 Phoenix spp. 8014 OPFI Opuntia ficus-indica 8154 PHSY3 Phoenix sylvestris 8015 OPMO5 Opuntia monacantha 8155 PHDA5 Photinia davidiana 8018 OPUNT Opuntia spp. 8157 PHAC3 Phyllanthus acidus 8019 ORCA12 Ormosia calavensis 8159 PHDI10 Phyllanthus distichus

REE SPECIES LIST 8022 OSOL Osmoxylon oliveri 8175 PIDI2 Pimenta dioica

T

: 8023 OSPA Osmoxylon pachyphyllum 8178 PIRAG Pimenta racemosa 8024 OSMOX Osmoxylon spp. 8180 PIMEN Pimenta spp. 8036 PAAQ2 Pachira aquatica 8181 PIIN5 Pinanga insignis 8044 PAST24 Palaquium stehlinii 8183 PICA18 Pinus caribaea 8054 PAAI Pandanus aimiriikensis 8187 PIPA13 Pinus patula 8055 PACO51 Pandanus cominsii 8188 PIPI6 Pinus pinaster

Section B.1 pg.207 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 8205 PIAL2 Pipturus albidus 8304 POSA11 Pouteria sandwicensis 8206 PIAR8 Pipturus argenteus 8305 POSA13 Pouteria sapota 8207 PIPTU Pipturus spp. 8306 POUTE Pouteria spp. 8210 PISCI Piscidia spp. 8307 PROB Premna obtusifolia 8212 PIBR3 Pisonia brunoniana 8308 PRPU5 Premna pubescens 8213 PIGR6 Pisonia grandis 8309 PRSE6 Premna serratifolia 8214 PISA5 Pisonia sandwicensis 8310 PREMN Premna spp. 8215 PISON Pisonia spp. 8315 PRAF Pritchardia affinis 8217 PIUM2 Pisonia umbellifera 8316 PRAR2 Pritchardia arecina 8218 PIWA2 Pisonia wagneriana 8317 PRBE Pritchardia beccariana 8220 PIDU Pithecellobium dulce 8318 PRFO Pritchardia forbesiana 8224 PIMO4 Pittosporum monae 8319 PRHA2 Pritchardia hardyi 8226 PIAR4 Pittosporum argentifolium 8320 PRHI Pritchardia hillebrandii 8227 PICO4 Pittosporum confertiflorum 8321 PRKA Pritchardia kaalae 8228 PIFL4 Pittosporum flocculosum 8322 PRLA3 Pritchardia lanaiensis 8229 PIGA2 Pittosporum gayanum 8323 PRLA4 Pritchardia lanigera 8230 PIGL4 Pittosporum glabrum 8324 PRLI2 Pritchardia limahuliensis 8231 PIHA3 Pittosporum halophilum 8325 PRLO2 Pritchardia lowreyana 8232 PIHA4 Pittosporum hawaiiense 8326 PRMA5 Pritchardia martii 8233 PIHO Pittosporum hosmeri 8327 PRMI3 Pritchardia minor 8234 PIKA3 Pittosporum kauaiense 8328 PRMU3 Pritchardia munroi 8235 PINA Pittosporum napaliense 8329 PRPA11 Pritchardia pacifica 8236 PIPE8 Pittosporum pentandrum 8330 PRPE7 Pritchardia perlmanii 8238 PITTO Pittosporum spp. 8331 PRRE Pritchardia remota 8239 PITE5 Pittosporum terminalioides 8336 PRSC Pritchardia schattaueri 8240 PIUN2 Pittosporum undulatum 8337 PRITC Pritchardia spp. 8241 PIVI5 Pittosporum viridiflorum 8338 PRVI2 Pritchardia viscosa 8242 PLGA2 Planchonella garberi 8339 PRWA Pritchardia waialealeana 8243 PLGR11 Planchonella grayana 8341 PRPE6 Procris pedunculata 8244 PLLI6 Planchonella linggensis 8343 PRJU Prosopis juliflora 8246 PLSA9 Planchonella samoensis 8344 PRPA4 Prosopis pallida 8247 PLANC Planchonella spp. 8355 PSCA Psidium cattleianum 8248 PLTO2 Planchonella torricellensis 8356 PSGU Psidium guajava 8250 PLRE4 Platydesma remyi 8365 PSFA Psychotria fauriei 8251 PLSP3 Platydesma spathulata 8366 PSGR Psychotria grandiflora 8252 PLATY Platydesma spp. 8368 PSCA18 Psychotria carolinensis 8257 PLAU2 Pleomele aurea 8369 PSGR3 Psychotria greenwelliae 8258 PLAU5 Pleomele auwahiensis 8370 PSHA2 Psychotria hathewayi 8259 PLFE Pleomele fernaldii 8373 PSHA3 Psychotria hawaiiensis 8260 PLFO2 Pleomele forbesii 8377 PSHE2 Psychotria hexandra 8261 PLHA3 Pleomele halapepe 8382 PSHEO Psychotria hexandra ssp. oahuensis 8262 PLHA4 Pleomele hawaiiensis 8386 PSHO Psychotria hobdyi 8263 PLEOM Pleomele spp. 8387 PSIN10 Psychotria insularum 8269 PLOBO Plumeria obtusa 8388 PSKA Psychotria kaduana

8271 PLRU2 Plumeria rubra 8390 PSYMAR Psychotria mariana Appendix B: 8272 PLUME Plumeria spp. 8392 PSMA6 Psychotria mariniana 8283 POGR28 Polyscias grandifolia 8393 PSMA7 Psychotria mauiensis 8284 POGU Polyscias guilfoylei 8398 PSRH2 Psychotria rhombocarpa 8285 POMA Polyscias macgillivrayi 8399 PSRO2 Psychotria rotensis 8286 PONO10 Polyscias nodosa 8400 PSYCH Psychotria spp. 8287 POSA27 Polyscias samoensis 8401 PSWA2 Psychotria wawrae 8288 POSC10 Polyscias scutellaria 8402 PSOD Psydrax odorata 8289 POLYS4 Polyscias spp. 8404 PTKA Pteralyxia kauaiensis TREE SPECIES LIST 8290 POPI12 Pometia pinnata 8405 PTMA Pteralyxia macrocarpa 8292 POHO Ponapea hosinoi 8406 PTERA Pteralyxia spp. 8293 POLE21 Ponapea ledermanniana 8407 PTIN2 Pterocarpus indicus 8294 PONAP Ponapea spp. 8412 PTLE3 Ptychococcus ledermannianus 8295 POPI4 Pongamia pinnata 8415 PTMA8 Ptychosperma macarthuri 8297 POCA43 Pouteria caimito 8416 PTPA Ptychosperma palauense 8298 POCA6 Pouteria calcarea 8418 PTYCH4 Ptychosperma spp. 8299 POCA23 Pouteria campechiana 8424 QUSU5 Quercus suber 8303 PLOB5 Planchonella obovata 8430 RAMY Rapanea myricifolia pg.208 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 8431 RAVO Rauvolfia vomitoria 8595 SESE13 Senna septemtrionalis 8432 RAIN8 Rauvolfia insularis 8596 SESI3 Senna siamea 8434 RASA3 Rauvolfia sandwicensis 8598 SENNA Senna spp. 8435 RAUVO Rauvolfia spp. 8599 SESU10 Senna sulfurea 8436 RAMA7 Ravenala madagascariensis 8600 SESU4 Senna surattensis 8440 RELA Reynoldsia lanutoensis 8601 SEKA2 Serianthes kanehirae 8442 RESA Reynoldsia sandwicensis 8603 SENE9 Serianthes nelsonii 8443 REYNO Reynoldsia spp. 8605 SEGR5 Sesbania grandiflora 8456 RHED4 Rheedia edulis 8606 SESE8 Sesbania sesban 8458 RHAP2 Rhizophora apiculata 8607 SESBA Sesbania spp. 8460 RHLA12 Rhizophora lamarckii 8608 SHIN Shirakiopsis indica 8462 RHMU Rhizophora mucronata 8609 SIFA Sida fallax 8463 RHIZO Rhizophora spp. 8610 SIDA Sida spp. 8464 RHST8 Rhizophora stylosa 8628 SOAM Solanum americanum 8465 RHODO2 Rhodomyrtus spp. 8631 SOMA3 Solanum mauritianum 8466 RHTO10 Rhodomyrtus tomentosa 8635 SOLAN Solanum spp. 8467 RHSA2 Rhus sandwicensis 8636 SOTO4 Solanum torvum 8468 RHUS Rhus spp. 8639 SOAL10 Sonneratia alba 8469 RHTA Rhus taitensis 8641 SOCH Sophora chrysophylla 8472 RICO3 Ricinus communis 8642 SOPHO Sophora spp. 8473 RICIN Ricinus spp. 8643 SOTO3 Sophora tomentosa 8474 RICA16 Rinorea carolinensis 8644 SPCA2 Spathodea campanulata 8480 RODE5 Rollinia deliciosa 8645 SPATH Spathodea spp. 8490 ROEL Roystonea elata 8646 SPSA7 Spiraeanthemum samoense 8491 ROOL Roystonea oleracea 8649 SPDU3 Spondias dulcis 8503 SAIN13 Samadera indica 8650 SPMO Spondias mombin 8505 SASA10 Albizia saman 8653 SPOND Spondias spp. 8506 SAMAN Samanea spp. 8655 STAM10 Stemonurus ammui 8509 SANIC4 Sambucus nigra 8656 SPPI4 Spondias pinnata 8510 SAMBU Sambucus spp. 8660 SOAM2 Soulamea amara 8515 SAKO4 Sandoricum koetjape 8665 STFA5 Sterculia fanaiho 8516 SAEL2 Santalum ellipticum 8667 STPA20 Sterculia palauensis 8517 SAFR4 Santalum freycinetianum 8669 STAN9 Streblus anthropophagorum 8518 SAAL16 Santalum album 8670 STPE3 Streblus pendulinus 8521 SAHA3 Santalum haleakalae 8671 STREB Streblus spp. 8522 SAPA7 Santalum paniculatum 8676 SUMA2 Suriana maritima 8525 SASA8 Santalum salicifolium 8678 SWIET Swietenia spp. 8526 SANTA Santalum spp. 8679 SWMA Swietenia macrophylla 8528 SAOA3 Sapindus oahuense 8687 SYRA6 Symplocos racemosa 8529 SASA4 Sapindus saponaria 8689 SYGL Syncarpia glomulifera 8531 SAPIN Sapindus spp. 8690 SYNCA Syncarpia spp. 8532 SAVI17 Sapindus vitiensis 8691 SYDU Synsepalum dulcificum 8534 SAIN2 Sapium indicum 8694 SYAQ Syzygium aqueum 8544 SAPA35 Sarcopygme pacifica 8695 SYBR3 Syzygium brevifolium 8548 SCCE3 Scaevola cerasifolia 8696 SYCA4 Syzygium carolinense 8549 SCCH3 Scaevola chamissoniana 8697 SYCL Syzygium clusiifolium 8550 SCGA2 Scaevola gaudichaudiana 8699 SYDE3 Syzygium dealatum 8551 SCPR Scaevola procera 8700 SYIN2 Syzygium inophylloides 8552 SCAEV Scaevola spp. 8701 SYJA Syzygium jambos 8555 SCHAE Schaefferia spp. 8702 SYMA2 Syzygium malaccense 8559 SCSA10 Schefflera samoensis 8703 SYRI3 Syzygium richii 8560 SCTA Scaevola taccada 8704 SYSA3 Syzygium samarangense 8561 SCMO Schinus molle 8705 SYSA6 Syzygium samoense 8563 SCTE Schinus terebinthifolius 8706 SYSA Syzygium sandwicense 8577 SCHY5 Scyphiphora hydrophyllacea 8708 SYZYG Syzygium spp.

REE SPECIES LIST 8583 SEFL9 Securinega flexuosa 8713 TAHE Tabebuia heterophylla

T

: 8585 SEKR3 Semecarpus kraemeri 8714 TAPA10 Tabebuia pallida 8586 SEVE4 Semecarpus venenosa 8716 TARO Tabebuia rosea 8588 SEAL4 Senna alata 8718 TABEB Tabebuia spp. 8590 SEGA2 Senna gaudichaudii 8719 TAAU3 Tabernaemontana aurantiaca 8591 SEMU5 Senna multijuga 8722 TAPA13 Tabernaemontana pandacaqui 8592 SEPE4 Senna pendula 8723 TARO3 Tabernaemontana rotensis

Section B.1 pg.209 Code NRCS Code Scientific Name Code NRCS Code Scientific Name 8737 TASA2 Tarenna sambucina 8890 WIFU Wikstroemia furcata 8741 TECA9 Tecoma castanifolia 8891 WIMO Wikstroemia monticola 8743 TEST Tecoma stans 8892 WIOA Wikstroemia oahuensis 8744 TEGR Tectona grandis 8895 WIPH2 Wikstroemia phillyreifolia 8745 TECTO Tectona spp. 8896 WIPU Wikstroemia pulcherrima 8748 TERMI Terminalia spp. 8897 WISA Wikstroemia sandwicensis 8749 TECA16 Terminalia carolinensis 8898 WISK Wikstroemia skottsbergiana 8750 TECA Terminalia catappa 8899 WIKST Wikstroemia spp. 8751 TECR3 Terminalia crassipes 8900 WIVI Wikstroemia villosa 8752 TEED Terminalia edulis 8901 XIAM Ximenia americana 8753 TELI7 Terminalia litoralis 8903 XYGR Xylocarpus granatum 8755 TEKA4 Terminalia kaernbachii 8904 XYMO2 Xylocarpus moluccensis 8756 TEMY Terminalia myriocarpa 8905 XYLOC2 Xylocarpus spp. 8758 TERI3 Terminalia richii 8907 XYCR Xylosma crenata 8759 TESA2 Terminalia samoensis 8908 XYHA Xylosma hawaiiensis 8770 TEFL5 Tetraplasandra flynnii 8909 XYNE2 Xylosma nelsonii 8771 TEGY Tetraplasandra gymnocarpa 8911 XYSA Xylosma samoensis 8772 TEHA2 Tetraplasandra hawaiensis 8915 XYLOS Xylosma spp. 8773 TEKA3 Tetraplasandra kavaiensis 8925 ZADI Zanthoxylum dipetalum 8774 TEOA Tetraplasandra oahuensis 8929 ZAHA Zanthoxylum hawaiiense 8775 TETRA11 Tetraplasandra spp. 8930 ZAKA Zanthoxylum kauaense 8776 TEWA Tetraplasandra waialealae 8933 ZAOA Zanthoxylum oahuense 8777 TEWA3 Tetraplasandra waimeae 8936 ZANTH Zanthoxylum spp. 8779 TEBI Tetrazygia bicolor 8939 ZIMA Ziziphus mauritiana 8784 THCA Theobroma cacao 8787 THPO3 Thespesia populnea 8788 THESP Thespesia spp. 8789 THPE3 Thevetia peruviana 8804 TIBOU Tibouchina spp. 8805 TIUR Tibouchina urvilleana 8806 TICO7 Timonius corymbosus 8807 TIMO4 Timonius mollis 8808 TIMON Timonius spp. 8809 TISU3 Timonius subauritus 8810 TITI Timonius timon 8811 TOONA Toona spp. 8812 TOCI Toona ciliata 8822 TOLA Touchardia latifolia 8823 TOUCH Touchardia spp. 8824 TOAR2 Tournefortia argentea 8826 TOURN Tournefortia spp. 8827 TRCA33 Trema cannabina 8831 TROR Trema orientalis 8832 TREMA Trema spp.

8837 TRIK Trichospermum ikutai Appendix B: 8838 TRLE8 Trichospermum ledermannii 8839 TRRI9 Trichospermum richii 8842 TRTR7 Triphasia trifolia 8846 TROB7 Tristiropsis obtusangula 8856 URGL Urera glabra 8857 URKA Urera kaalae 8858 URERA Urera spp. 8866 VEME3 Adonidia merrillii TREE SPECIES LIST 8869 VEMO3 Vernicia montana 8870 VERNI Vernicia spp. 8872 VICO17 Vitex cofassus 8874 VIPA6 Vitex parviflora 8875 VITEX Vitex spp. 8876 VITR7 Vitex trifolia 8884 WEBI Wedelia biflora 8886 WEAF Weinmannia affinis 8889 WIBI Wikstroemia bicornuta pg.210 SECTION B.2 FSM TREE SPECIES LIST Common Name Scientific Name NRCS CodeCode BY COMMON NAME araucaria Araucaria spp. ARAUC2 6158 areca palm Dypsis lutescens DYLU 6966 Common Name Scientific Name NRCS CodeCode arfath Averrhoa carambola AVCA 6198 aak Rhizophora apiculata RHAP2 8458 arfath Eugenia malaccensis EUMA5 7082 aapwo Cynometra yokotae CYYO 6859 arfath Syzygium malaccense SYMA2 8702 aaw Ficus prolixa FIPR2 7165 arin Morinda citrifolia MOCI3 7849 abas Psidium guajava PSGU 8356 aro yar Premna obtusifolia PROB 8307 abe Metroxylon amicarum MEAM4 7798 aroma Pipturus argenteus PIAR8 8206 abruk Sonneratia alba SOAL10 8639 arr Premna obtusifolia PROB 8307 abrur Sonneratia alba SOAL10 8639 arughuschel Ceiba pentandra CEPE2 6449 abrur Xylocarpus moluccensis XYMO2 8904 as Terminalia catappa TECA 8750 acarido Commersonia bartramia COBA17 6703 asas Terminalia catappa TECA 8750 achoro Lumnitzera littorea LULI8 7602 attieu Syzygium stelechanthum SYST3 7099 achorong Hernandia sonora HESO 7366 au Ficus microcarpa FIMI2 7160 achorong Hernandia nymphaeifolia HENY 7364 au Ficus prolixa FIPR2 7165 acpuhl Syzygium malaccense SYMA2 8702 aunenipuin Kleinhovia hospita KLHO 7506 adaburrunigakiy Pisonia grandis PIGR6 8213 averrhoa Averrhoa spp. AVERR 6199 adidi Parinari laurina PALA5 8104 Avicennia Avicennia spp. AVICE 6205 aees Atuna racemosa ATRA2 6193 Avicennia alba Avicennia marina subsp. AVAL 6200 affor Glochidion spp. GLOCH 7250 Marina agran Hernandia sonora HESO 7366 Avicennia marina Avicennia marina AVMA3 6203 ahkaran Hernandia sonora HESO 7366 avocado Persea americana PEAM3 7211 ahlew Cordia subcordata COSU2 6742 aw Ficus prolixa FIPR2 7165 ahwahn Ficus tinctoria FITI2 7176 awan Ficus tinctoria FITI2 7176 aian Nypa fruticans NYFR2 7974 awen Ficus tinctoria FITI2 7176 aiau Ficus prolixa FIPR2 7165 ayau Ficus virens FIVI3 7179 ais Parinari laurina PALA5 8104 ayeng Nypa fruticans NYFR2 7974 ais Atuna racemosa ATRA2 6193 aying Nypa fruticans NYFR2 7974 akapa Rhizophora apiculata RHAP2 8458 ayis Atuna racemosa ATRA2 6193 akelel Rhizophora mucronata RHMU 8462 ayung Nypa fruticans NYFR2 7974 akurang Hernandia sonora HESO 7366 azan Barringtonia asiatica BAAS3 6220 alahee Psydrax odorata PSOD 8402 babay babae Carica papaya CAPA23 6395 alamang Pipturus argenteus PIAR8 8206 baiwai waiwai Carica papaya CAPA23 6395 Alexandrian laurel Calophyllum inophyllum CAIN4 6341 balaaw Guettarda speciosa GUSP3 7307 E alfanispan Eugenia reinwardtiana EURE7 7091 bamboo (clumping Bambusa spp. BAMBU 6215 alin Morinda citrifolia MOCI3 7849 only) bangbeng Macaranga carolinensis MACA25 7618 alko Pipturus argenteus PIAR8 8206 bangbeng Thespesia populnea THPO3 8787 allophylus Allophylus spp. ALLOP 6083 banyan Ficus prolixa FIPR2 7165 alwan Pandanus ponapensis PAPO2 8079 Barringtonia Barringtonia spp. BARRI 6223 amoloset Tournefortia argentea TOAR2 8824 batte ni gaken Ceiba pentandra CEPE2 6449 amonoset Tournefortia argentea TOAR2 8824 beach gardenia Guettarda speciosa GUSP3 7307 amunusut Tournefortia argentea TOAR2 8824 beach heliotrope Tournefortia argentea TOAR2 8824 anau Cordia subcordata COSU2 6742 bede Melochia villosissima var MEVIV 7771 angaiha Barringtonia asiatica BAAS3 6220 villosissima angel Allophylus timorensis ALTI2 6085 berteroana Fagraea berteroana FABE 7141 anilla Inocarpus fagifer INFA3 7475 bidi Macaranga carolinensis MACA25 7618 anne Cordia subcordata COSU2 6742 biid Macaranga carolinensis MACA25 7618 annona Annona spp. ANNON 6130 bilimbi Averrhoa bilimbi AVBI 6197 ansu Averrhoa carambola AVCA 6198 bith Macaranga carolinensis MACA25 7618 aou Ficus virens FIVI3 7179 biuol Barringtonia asiatica BAAS3 6220 apel Eugenia malaccensis EUMA5 7082 black mangrove Lumnitzera littorea LULI8 7602 apel Syzygium malaccense SYMA2 8702 black wattle Acacia auriculiformis ACAU 6003 apel en Pohnpei Syzygium malaccense SYMA2 8702 REE SPECIES LIST BY COMMON NAM blow Guettarda speciosa GUSP3 7307 apet Fagraea berteroana FABE 7141 bloy Inocarpus fagifer INFA3 7475 apilas Cerbera dilatata CEDI12 6459 Brazilian cherry Hymenaea courbaril HYCO 7442 aplokating Psychotria mariana PSYMAR 8390 FSM T breadfruit Artocarpus altilis ARAL7 6171

: apokado, avocado Persea americana PEAM3 7211 breadfruit Artocarpus spp. ARTOC 6178 aput Macaranga carolinensis MACA25 7618 broad leaf Swietenia macrophylla SWMA 8679 apwid Macaranga carolinensis MACA25 7618 mahogany apwinis Ficus tinctoria FITI2 7176 brok Xylocarpus granatum XYGR 8903 ar Premna serratifolia PRSE6 8309 buoy Inocarpus fagifer INFA3 7475 arakak Senna alata SEAL4 8588

Section B.2 pg.211 Common Name Scientific Name NRCS CodeCode Common Name Scientific Name NRCS CodeCode bus bus Barringtonia asiatica BAAS3 6220 eng Nypa fruticans NYFR2 7974 bwebwao Carica papaya CAPA23 6395 es Carica papaya CAPA23 6395 bweibwai Carica papaya CAPA23 6395 faariyap Syzygium malaccense SYMA2 8702 cacao Theobroma cacao THCA 8784 fach Pandanus tectorius PATE2 8085 calamansi Citrus mitis CIMI3 6583 fahsuc Nypa fruticans NYFR2 7974 calamondin Citrus mitis CIMI3 6583 faliap Eugenia javanica EUJA4 7078 candlenut Aleurites moluccana ALMO2 6075 false elder Premna obtusifolia PROB 8307 Caryota Caryota spp. CARYO 6400 faltir Cycas micronesica CYCI3 6852 cashew Anacardium occidentale ANOC 6107 faniap Eugenia malaccensis EUMA5 7082 Cassia Cassia spp. CASSI 6422 faniok Merrilliodendron MEME12 7774 Cassia siamea Cassia siamea CASI4 6420 megacarpum Casuarina litorea Casuarina litorea CALI8 6437 far Pandanus tectorius PATE2 8085 celtis Celtis spp. CELTI 460 fienkack Premna obtusifolia PROB 8307 chai Annona squamosa ANSQ 6131 fienkack Premna serratifolia PRSE6 8309 cheepwech Heritiera littoralis HELI9 7359 fig Ficus carica FICA 7151 chekis Pemphis acidula PEAC6 8123 fish poison tree Barringtonia asiatica BAAS3 6220 chel Tournefortia argentea TOAR2 8824 fishtail palm Caryota mitis CAMI36 6399 chen Tournefortia argentea TOAR2 8824 flamboyant Bauhinia monandra BAMO2 6226 cherimoya Annona cherimola ANCH9 6124 flay n sabouw Senna alata SEAL4 8588 chia Rhizophora mucronata RHMU 8462 food color Bixa orellana BIOR 6238 chiaan iimw Rhizophora apiculata RHAP2 8458 for Plumeria rubra PLRU2 8271 chiaan uumw Rhizophora mucronata RHMU 8462 formosan koa Acacia confusa ACCO 6004 chimei Psychotria carolinensis PSCA18 8368 fox-tongued Melastoma sanguineum MESA3 7713 China laurel Antidesma kusaiense ANKU3 6138 melastoma China laurel Antidesma ponapense ANPO8 6142 frotel Cycas micronesica CYCI3 6852 China laurel Antidesma spp. ANTID 6145 fuliohfohl Sonneratia alba SOAL10 8639 Chinese banyan Ficus microcarpa FIMI2 7160 gaal Hibiscus tiliaceus HITI 7412 choboch Heritiera littoralis HELI9 7359 gachal Hernandia sonora HESO 7366 choi Pandanus tectorius PATE2 8085 gachal Hernandia nymphaeifolia HENY 7364 choyo Intsia bijuga INBI 7477 gagu Commersonia bartramia COBA17 6703 ci Lumnitzera littorea LULI8 7602 gak'iynigoma Ficus elastica FIEL 7155 citrus Citrus spp. CITRU2 860 galad Rhus taitensis RHTA 8469 cocoa Theobroma cacao THCA 8784 galu Cordia subcordata COSU2 6742 cocobolo Dalbergia tucurensis DATU 6870 ganitnityuwan Leucaena leucocephala LELE10 7565 coconut Cocos nucifera CONU 908 ganow Cordia subcordata COSU2 6742 Cook pine Araucaria columnaris ARCO32 6155 gathimech Aidia cochinchinensis AICO2 6048 coral bean tree Adenanthera pavonina ADPA 6028 geking sepan Senna alata SEAL4 8588 coral tree Erythrina variegata ERVAO 7016 geranium aralia Polyscias guilfoylei POGU 8284 cottin Ceiba pentandra CEPE2 6449 ghuul Barringtonia asiatica BAAS3 6220 croton Croton sp. CROTO 6772 gil Terminalia catappa TECA 8750 cutin Ceiba pentandra CEPE2 6449 gilifa Hibiscus tiliaceus HITI 7412 Dalbergia retusa Dalbergia retusa DARE6 6868 gilivo Hibiscus tiliaceus HITI 7412 dangandangan Leucaena leucocephala LELE10 7565 gillieu Vitex trifolia VITR7 8876 dapanapan Artocarpus heterophyllus ARHE2 6173 gochol Hernandia sonora HESO 7366 gochol Hernandia nymphaeifolia HENY 7364

deipw Pandanus pulposus PAPU18 8080 Appendix B: deipw Pandanus tectorius PATE2 8085 grey milkwood Cerbera dilatata CEDI12 6459 dipwoapw Terminalia catappa TECA 8750 gritin Parinari laurina PALA5 8104 dohng Campnosperma CABR42 6367 guag bbuag Heterospathe elata HEEL9 7377 brevipetiolata guahva Psidium guajava PSGU 8356 dort Intsia bijuga INBI 7477 guava Psidium guajava PSGU 8356 durian Durio zibethinus DUZI 6965 guest tree Kleinhovia hospita KLHO 7506 durien Pangium edule PAED4 8091 gumomingabchey Albizia lebbeck ALLE 6059 dyer's fig Ficus tinctoria FITI2 7176 gumor ni spanis Albizia saman SASA10 8505 TREE SPECIES LIST earpod Enterolobium ENCY 6996 guon Barringtonia racemosa BARA5 6221 cyclocarpum gurgur Citrus sinensis CISI3 6577 ee Morinda citrifolia MOCI3 7849 guruwel Pipturus argenteus PIAR8 8206 eeme Cynometra yokotae CYYO 6859 guwan Ficus tinctoria FITI2 7176 eet Guettarda speciosa GUSP3 7307 haiakai Plumeria rubra PLRU2 8271 ekurang Hernandia nymphaeifolia HENY 7364 hakapini Sophora tomentosa SOTO3 8643 elahk Campnosperma CABR42 6367 halkoh Pipturus argenteus PIAR8 8206 brevipetiolata hangi Pemphis acidula PEAC6 8123 elat Dendrocnide latifolia DELA13 6886 hara Pandanus fischerianus PAFI 8063 pg.212 Common Name Scientific Name NRCS CodeCode Common Name Scientific Name NRCS CodeCode hau Hibiscus tiliaceus HITI 7412 kekapin Terminalia catappa TECA 8750 hetau Calophyllum inophyllum CAIN4 6341 kel Terminalia catappa TECA 8750 hibun Metroxylon amicarum MEAM4 7798 keleu Hibiscus tiliaceus HITI 7412 hochol Hernandia nymphaeifolia HENY 7364 ken Terminalia samoensis TESA2 8759 hulifui Hibiscus tiliaceus HITI 7412 kethoal Melochia villosissima var MEVIV 7771 hulio Ficus prolixa FIPR2 7165 villosissima i Morinda citrifolia MOCI3 7849 kewikid en lohl Glochidion marianum GLMA9 7248 ice cream bean Inga edulis INED 7472 kia Nypa fruticans NYFR2 7974 ifaluk Ficus prolixa FIPR2 7165 kienglak Guettarda speciosa GUSP3 7307 ifaluk Ficus virens FIVI3 7179 kienpel Pandanus dilatatus PADI2 8058 ifil Intsia bijuga INBI 7477 kienpel Pandanus dubius PADU3 8060 ihd Guettarda speciosa GUSP3 7307 kihrak Inocarpus fagifer INFA3 7475 ihi Inocarpus fagifer INFA3 7475 kil Terminalia samoensis TESA2 8759 iich Bambusa spp. BAMBU 6215 kilee-ant Ficus virens FIVI3 7179 ikoack Cordia subcordata COSU2 6742 kiliau Ficus prolixa FIPR2 7165 ikoik Cordia subcordata COSU2 6742 kiliau Ficus virens FIVI3 7179 ikunal Artocarpus altilis ARAL7 6171 kilife Hibiscus tiliaceus HITI 7412 ilahnglahng Cananga odorata CAOD 6370 kilifu Hibiscus tiliaceus HITI 7412 Indian lilac Azadirachta indica AZIN2 6206 kin Terminalia samoensis TESA2 8759 indian lilac Melia azedarach MEAZ 993 kinisom Rinorea carolinensis RICA16 8474 Indian mulberry Morinda citrifolia MOCI3 7849 kiniyaw Clinostigma carolinense CLCA21 6645 Indian Melastoma candidum MECA9 7712 kio Nypa fruticans NYFR2 7974 rhododendron kipal Pandanus ponapensis PAPO2 8079 intekul, pasyure Pandanus PAMA3 8071 kipar Pandanus tectorius PATE2 8085 macrocephalus kiparenai Pandanus dubius PADU3 8060 ipil-ipil Intsia bijuga INBI 7477 kiparenwel Pandanus tolotomensis PATO6 8086 ironwood Casuarina equisetifolia CAEQ 6434 kipau Carica papaya CAPA23 6395 isou Calophyllum inophyllum CAIN4 6341 kipwpwaaw Carica papaya CAPA23 6395 ituu Calophyllum inophyllum CAIN4 6341 kirekinwel Syzygium stelechanthum SYST3 7099 iumwul Citrus spp. CITRU2 860 kitak Allophylus timorensis ALTI2 6085 ivory nut palm Metroxylon amicarum MEAM4 7798 kitee Ochrosia oppositifolia NEOP 7942 jaboticaba Myrciaria cauliflora MYCA9 7894 kkoton Ceiba pentandra CEPE2 6449 jackfruit Artocarpus heterophyllus ARHE2 6173 koacnu Cocos nucifera CONU 908 jasmine grape Gardenia spp. GARDE 7227 koahpi Coffea robusta CORO8 6685 E jomineia Pandanus pulposus PAPU18 8080 koamoau Cynometra ramiflora CYRA8 6858 Ka Terminalia carolinensis TECA16 8749 koanu Cocos nucifera CONU 908 kachiel Discocalyx ponapensis DIPO 6921 koatoa Sonneratia alba SOAL10 8639 kacshpar Ochrosia oppositifolia NEOP 7942 koatun Ceiba pentandra CEPE2 6449 kahil Commersonia bartramia COBA17 6703 koee Claoxylon carolinianum CLCA15 6586 kahkarak Syzygium stelechanthum SYST3 7099 kohle Manilkara hoshinoi MAHO5 7666 kahmant Aidia cochinchinensis AICO2 6048 kohnyah Ficus prolixa FIPR2 7165 kahrahk Rhizophora mucronata RHMU 8462 kon Terminalia samoensis TESA2 8759 kahsilah Cynometra ramiflora CYRA8 6858 konpuil Garcinia ponapensis GAPO4 7217 kaikes Adenanthera pavonina ADPA 6028 koral Hernandia sonora HESO 7366 kalau Hibiscus tiliaceus HITI 7412 koral Hernandia nymphaeifolia HENY 7364 kalau-n-ant Kleinhovia hospita KLHO 7506 kotoh Sonneratia albaSOAL10 8639 kange Barringtonia racemosa BARA5 6221 kotop Exorrhiza ponapensis EXPO2 7133 kangit Mangifera indica MAIN3 885 kua Nypa fruticans NYFR2 7974 kanit Mangifera minor MAMI3 7657 kuafa Psidium guajava PSGU 8356 kapok Ceiba pentandra CEPE2 6449 kuahpa Psidium guajava PSGU 8356 karara Myristica insularis MYIN3 7903 kuhfahfah Psidium guajava PSGU 8356 karasyu Aglaia ponapensis AGPO4 6044 kulalis Adenanthera pavonina ADPA 6028 karer Citrus aurantifolia CIAU 6572 kumim Averrhoa bilimbi AVBI 6197 REE SPECIES LIST BY COMMON NAM kartenia Gardenia spp. GARDE 7227 kur Artocarpus altilis ARAL7 6171 kasapal Caesalpinia sappan CASA28 6320 kuren Intsia bijuga INBI 7477 kasik Vitex trifolia VITR7 8876 kurrak Inocarpus fagifer INFA3 7475 FSM T kattai Ponapea hosinoi POHO 8292

: kurukur Citrus spp. CITRU2 860 kattar Cyathea nigricans CYNI7 6842 kúrúwén Macaranga carolinensis MACA25 7618 kattar Cyathea ponapeana CYPO11 6844 kusrohsr Scaevola taccada SCTA 8560 kehma Terminalia carolinensis TECA16 8749 kuun Barringtonia asiatica BAAS3 6220 kehngid Mangifera indica MAIN3 885 kwat Sonneratia alba SOAL10 8639 kehnpap Syzygium carolinense SYCA4 8696 kwenguhl Barringtonia racemosa BARA5 6221

Section B.2 pg.213 Common Name Scientific Name NRCS CodeCode Common Name Scientific Name NRCS CodeCode laha Planchonella obovata PLOB5 8303 me ale Pandanus tectorius PATE2 8085 laim Citrus aurantifolia CIAU 6572 mei Artocarpus altilis ARAL7 6171 lajaperik Pandanus utilis PAUT 8088 mei chocho Artocarpus mariannensis ARMA28 6175 lantern tree Hernandia nymphaeifolia HENY 7364 mei kole Artocarpus mariannensis ARMA28 6175 lat Scaevola taccada SCTA 8560 memiap Carica papaya CAPA23 6395 lath Scaevola taccada SCTA 8560 mengit Vitex trifolia VITR7 8876 lelah Melia azedarach MEAZ 993 mesecheues Aglaia mariannensis AGMA14 6042 leles Dendrocnide latifolia DELA13 6886 metekam Adenanthera pavonina ADPA 6028 lifaus Bruguiera gymnorhiza BRSE11 6268 meu yok Pandanus dubius PADU3 8060 lifos Bruguiera gymnorhiza BRSE11 6268 Mindanao gum Eucalyptus deglupta EUDE2 7034 limes Citrus aurantifolia CIAU 6572 miro Thespesia populnea THPO3 8787 lior Premna obtusifolia PROB 8307 mo Ochrosia oppositifolia NEOP 7942 lipstick plant Bixa orellana BIOR 6238 moakumi Swietenia mahagoni SWMA2 940 lo Hibiscus tiliaceus HITI 7412 moek Pisonia grandis PIGR6 8213 lo lacp Macaranga carolinensis MACA25 7618 mohmiyap Carica papaya CAPA23 6395 lol Morinda citrifolia MOCI3 7849 momiyap Carica papaya CAPA23 6395 lom Bruguiera gymnorhiza BRSE11 6268 mommyapple Carica papaya CAPA23 6395 longan Euphoria longana EULO7 7117 mon Spondias dulcis SPDU3 8649 lu Cocos nucifera CONU 908 mongmong Angiopteris evecta ANEV 6118 lu nu Cocos nucifera CONU 908 monkeypod Albizia saman SASA10 8505 luas Mammea odorata MAOD2 7654 monou Kleinhovia hospita KLHO 7506 lubodal Bruguiera gymnorhiza BRSE11 6268 moor Bambusa spp. BAMBU 6215 lum Heritiera littoralis HELI9 7359 mos Artocarpus altilis ARAL7 6171 luth Scaevola taccada SCTA 8560 mos en Kosrae Artocarpus mariannensis ARMA28 6175 lychee Litchi chinensis LICH4 7583 mosor Guettarda speciosa GUSP3 7307 macadamia Macadamia integrifolia MAIN8 7614 mosor Fagraea berteroana FABE 7141 Macarthur palm Ptychosperma PTMA8 8415 mother of cocoa Gliricidia sepium GLSE2 7245 macarthuri mother of cocoa Gliricidia sepium GLSE2 7245 macngko Mangifera indica MAIN3 885 mountain apple Syzygium malaccense SYMA2 8702 magojokojok Pandanus rotundatus PARO2 8083 mountain stopper Eugenia reinwardtiana EURE7 7091 mahi Artocarpus altilis ARAL7 6171 muh Citrus spp. CITRU2 860 mahnka Mangifera indica MAIN3 885 muk Pisonia grandis PIGR6 8213 mahnko, Mangifera indicaMAIN3 885 murop Eugenia javanica EUJA4 7078 mai Artocarpus altilis ARAL7 6171 mwaak Pisonia grandis PIGR6 8213 mai Artocarpus spp. ARTOC 6178 mweng Pandanus tectorius PATE2 8085 maichul Artocarpus altilis ARAL7 6171 mwetkwem Adenanthera pavonina ADPA 6028 maieas Artocarpus altilis ARAL7 6171 mwewukkay Guettarda speciosa GUSP3 7307 maifai Artocarpus heterophyllus ARHE2 6173 mwoosor Guettarda speciosa GUSP3 7307 maipah Artocarpus mariannensis ARMA28 6175 mwuropw Inocarpus fagifer INFA3 7475 maiuhp Artocarpus altilis ARAL7 6171 mwuropw en sed Heritiera littoralis HELI9 7359 maiyah Artocarpus mariannensis ARMA28 6175 nach Casuarina equisetifolia CAEQ 6434 Malabar chestnut Pachira aquatica PAAQ2 8036 naimis Citrus aurantifoliaCIAU 6572 Malabar Melastoma candidum MECA9 7712 natu Scaevola taccada SCTA 8560 melastome neem Azadirachta indica AZIN2 6206 malil Rhizophora apiculata RHAP2 8458

neet Scaevola taccada SCTA 8560 Appendix B: malunggay Moringa oleifera MOOL 7855 neet Tournefortia argentea TOAR2 8824 mangalwag Morinda citrifolia MOCI3 7849 nen Morinda citrifolia MOCI3 7849 mango Mangifera indica MAIN3 885 nenketak Pandanus hosinoi PAHO6 8065 mangosteen Garcinia mangostana GAMA10 7214 neokuk Casuarina equisetifolia CAEQ 6434 mangueira Mangifera indica MAIN3 885 ngau Cordia subcordata COSU2 6742 manu atapapo Cycas micronesica CYCI3 6852 ngi Pemphis acidula PEAC6 8123 marap Inocarpus fagifer INFA3 7475 ngo Allophylus timorensis ALTI2 6085 marapinset Heritiera littoralis HELI9 7359 ngu Allophylus timorensis ALTI2 6085 TREE SPECIES LIST maras Soulamea amara SOAM2 8660 nguh Allophylus timorensis ALTI2 6085 marasau Aglaia ponapensis AGPO4 6044 ngumol Glochidion marianum GLMA9 7248 maratte Elaeocarpus kusanoi ELKU 6982 ngumormingobch Albizia lebbeck ALLE 6059 matal Pandanus cominsii PACO51 8055 ey matieu Cinnamomum CISE2 6562 ni Cocos nucifera CONU 908 sessilifolium nifaach Pandanus cominsii PACO51 8055 mattieu Cinnamomum CICA2 6557 nifaus Bruguiera gymnorhiza BRSE11 6268 carolinense nih Cocos nucifera CONU 908 mauk Ficus tinctoria FITI2 7176 nihn Ficus tinctoria FITI2 7176 pg.214 Common Name Scientific Name NRCS CodeCode Common Name Scientific Name NRCS CodeCode niiw Cocos nucifera CONU 908 plentiful fig Ficus copiosa FICO2 7152 nior Premna obtusifolia PROB 8307 ploek brok Xylocarpus granatum XYGR 8903 nityanmis Intsia bijuga INBI 7477 plumeria Plumeria rubra PLRU2 8271 niyoor Premna serratifolia PRSE6 8309 po Cyathea nigricans CYNI7 6842 nnét Scaevola taccada SCTA 8560 po Cyathea ponapeana CYPO11 6844 noc Casuarina equisetifolia CAEQ 6434 poak Pandanus dubius PADU3 8060 nofitin mongo Bixa orellana BIOR 6238 poghu Pandanus dubius PADU3 8060 nonu Morinda citrifoliaMOCI3 7849 pogo Pandanus fragrans PAFR7 8064 nopurnen Morinda citrifolia MOCI3 7849 poison tree Semecarpus kraemeri SEKR3 8585 nopwur Morinda citrifolia MOCI3 7849 pomeria Plumeria rubra PLRU2 8271 Norfolk Island Araucaria heterophylla ARHE12 6157 pone Thespesia populnea THPO3 8787 pine prais Melia azedarach MEAZ 993 not Scaevola taccada SCTA 8560 pu Areca catechu ARCA41 6167 noth Scaevola taccada SCTA 8560 pua rakau Terminalia samoensis TESA2 8759 nu Cocos nucifera CONU 908 puka Pisonia grandis PIGR6 8213 nu arau Cocos nucifera CONU 908 pulasan Nephelium ramboutan- NERA3 7953 NUNU Horsfieldia nunu HONU2 7429 ake nut Scaevola taccada SCTA 8560 pummelo Citrus maxima CIMA5 6581 oahs Metroxylon amicarum MEAM4 7798 pung pung Hernandia sonora HESO 7366 ochop Clinostigma carolinense CLCA21 6645 punopun Xylocarpus granatum XYGR 8903 oi Lumnitzera littorea LULI8 7602 punopun Xylocarpus moluccensis XYMO2 8904 ong Bruguiera gymnorhiza BRSE11 6268 pur n wai Cananga odorata CAOD 6370 op Pandanus tectorius PATE2 8085 puzzle nut Xylocarpus granatum XYGR 8903 opop Elaeocarpus kusanoi ELKU 6982 pwalang Cananga odorata CAOD 6370 orang Hernandia nymphaeifolia HENY 7364 pwanang Cananga odorata CAOD 6370 orens Citrus sinensis CISI3 6577 pwulok Xylocarpus granatum XYGR 8903 ormuh Pipturus argenteus PIAR8 8206 pwulok Xylocarpus moluccensis XYMO2 8904 orr Premna obtusifolia PROB 8307 quick stick Gliricidia sepium GLSE2 7245 oun Commersonia bartramia COBA17 6703 quick stick Gliricidia sepium GLSE2 7245 ousus Excoecaria agallocha EXAG 7129 raar Erythrina variegata ERVAO 7016 paar Erythrina variegata ERVAO 7016 raatta Cerbera manghas CEMA20 6461 pacheren Pandanus jaluitensis PAJA3 8066 rain tree Albizia saman SASA10 8505 Pacific rosewood Thespesia populnea THPO3 8787 rainbow gum Eucalyptus deglupta EUDE2 7034 paho Pandanus compressus PACO3 8056 rakau haiko Sophora tomentosa SOTO3 8643 E pahr Erythrina fusca ERFU2 7008 rakich Calophyllum inophyllum CAIN4 6341 pahr Erythrina variegata ERVAO 7016 rambutan Nephelium lappaceum NELA7 7952 pakeena Thespesia populnea THPO3 8787 ramluw Campnosperma CABR42 6367 pakoa Pandanus dubius PADU3 8060 brevipetiolata pakua Pandanus fragrans PAFR7 8064 rang Bixa orellana BIOR 6238 palm tree Clinostigma carolinense CLCA21 6645 rapah Ficus elastica FIEL 7155 pambu Bambusa spp. BAMBU 6215 red melastome Melastoma sanguineum MESA3 7713 panax Polyscias guilfoylei POGU 8284 rekich Calophyllum inophyllum CAIN4 6341 panew Semecarpus kraemeri SEKR3 8585 remag Scaevola taccada SCTA 8560 panu Thespesia populnea THPO3 8787 remek Scaevola taccada SCTA 8560 paper mulberry Broussonetia papyrifera BRPA4 6262 remong Citrus aurantifolia CIAU 6572 parem Nypa fruticans NYFR2 7974 robusta coffee Coffea robusta CORO8 6685 parepein Erythrina variegata ERVAO 7016 rohbohtin Leucaena leucocephala LELE10 7565 payuit Angiopteris evecta ANEV 6118 rose myrtle Rhodomyrtus tomentosa RHTO10 8466 peach palm Bactris gasipaes BAGA2 5261 rowal Pangium edule PAED4 8091 peengas Fagraea berteroana FABE 7141 roway Rhizophora mucronata RHMU 8462 peet Pandanus patina PAPA39 8077 rramlluw Campnosperma CABR42 6367 pehri Bambusa spp. BAMBU 6215 brevipetiolata pehri en sapahn Bambusa spp. BAMBU 6215 rum Heritiera littoralis HELI9 7359 REE SPECIES LIST BY COMMON NAM pene Thespesia populnea THPO3 8787 rung Heritiera littoralis HELI9 7359 Pheasant wood Senna siamea SESI3 8596 rupung Metroxylon amicarum MEAM4 7798 pihngpihng Hernandia nymphaeifolia HENY 7364 saasap Annona muricata ANMU2 6128

FSM T sae Annona muricata ANMU2 6128

: pilampwoia Acacia confusa ACCO 6004 pilampwoia Delonix regia DERE 6883 sago palm Metroxylon sagu MESA7 7799 weitahta sakan Aleurites moluccana ALMO2 6075 pingapin Hernandia sonora HESO 7366 sakuranirow Delonix regia DERE 6883 pingaping Hernandia nymphaeifolia HENY 7364 salai Senna alata SEAL4 8588 pink-eyed cerbera Cerbera manghas CEMA20 6461 sales Sonneratia alba SOAL10 8639

Section B.2 pg.215 Common Name Scientific Name NRCS CodeCode Common Name Scientific Name NRCS CodeCode Samoan tropical Terminalia samoensis TESA2 8759 Tahitian chestnut Inocarpus fagifer INFA3 7475 almond tai Annona squamosa ANSQ 6131 sandalwood Santalum album SAAL16 8518 taip Pandanus ponapensis PAPO2 8079 saposa Artocarpus spp. ARTOC 6178 tama Musa nana MUNA 7874 sapwo Hibiscus tiliaceus HITI 7412 tamarind Tamarindus indica TAIN2 897 saras Sonneratia alba SOAL10 8639 tangantan Leucaena leucocephala LELE10 7565 sarf Terminalia catappa TECA 8750 tangantangan Leucaena leucocephala LELE10 7565 sasaf Annona muricata ANMU2 6128 teak Tectona grandis TEGR 8744 sasran Tournefortia argentea TOAR2 8824 thong Campnosperma CABR42 6367 sausau Annona muricata ANMU2 6128 brevipetiolata sawur Plumeria rubra PLRU2 8271 thort Intsia bijuga INBI 7477 screw pine Pandanus dubius PADU3 8060 thoth Scaevola taccada SCTA 8560 screwpine Pandanus tectorius PATE2 8085 ti rakauhaiko Sophora tomentosa SOTO3 8643 sea hibiscus Hibiscus tiliaceus HITI 7412 ti warenga Pipturus argenteus PIAR8 8206 sea trumpet Cordia subcordata COSU2 6742 tihus Musa sapientum MUSA 7875 seagrape Coccoloba uvifera COUV 6670 tik Tectona grandis TEGR 8744 seeded breadfruit Artocarpus mariannensis ARMA28 6175 tikap Musa tikap MUTI 7878 seewur peengas Fagraea berteroana FABE 7141 titin Tournefortia argentea TOAR2 8824 seewuriinen Cerbera manghas CEMA20 6461 tongo Bruguiera gymnorhiza BRSE11 6268 seir Fagraea berteroana FABE 7141 topwuk Premna serratifolia PRSE6 8309 seiren wai Cananga odorata CAOD 6370 tropical almond Terminalia catappa TECA 8750 seirenwai Cananga odorata CAOD 6370 truka shai Annona muricata ANMU2 6128 seur Plumeria rubra PLRU2 8271 truk-en-kili-n-wai Senna alata SEAL4 8588 sheoak Casuarina equisetifolia CAEQ 6434 tuhi Xylocarpus granatum XYGR 8903 show Intsia bijuga INBI 7477 tuhi Xylocarpus moluccensis XYMO2 8904 shrah Ficus tinctoria FITI2 7176 tuhkehn Acacia auriculiformis ACAU 6003 Siamese cassia Senna siamea SESI3 8596 pwelmwahu sibukao Caesalpinia sappan CASA28 6320 tuhkehn wai Tectona grandis TEGR 8744 silaue Pandanus cylindricus PACY10 8057 tuhken kilinwai Senna alata SEAL4 8588 simpleleaf Vitex trifolia VITR7 8876 tuhngantuhngan Leucaena leucocephala LELE10 7565 chastetree tup Melochia villosissima var MEVIV 7771 simweta Delonix regia DERE 6883 villosissima sin Terminalia samoensis TESA2 8759 tup Macaranga carolinensis MACA25 7618 sin Terminalia litoralis TELI7 8753 tupuchol Commersonia bartramia COBA17 6703 sinife Hibiscus tiliaceus HITI 7412 tupwpwunuwen Pipturus argenteus PIAR8 8206 sinifo Hibiscus tiliaceus HITI 7412 tupwpwunuwén Macaranga carolinensis MACA25 7618 sinnau Pandanus cylindricus PACY10 8057 ueoku Casuarina equisetifolia CAEQ 6434 sip Intsia bijuga INBI 7477 ueokuk Casuarina equisetifolia CAEQ 6434 sisin Tournefortia argentea TOAR2 8824 ukall Serianthes kanehirae SEKA2 8601 sobuk Premna obtusifoliaPROB 8307 uma Ochrosia oppositifolia NEOP 7942 song Bruguiera gymnorhiza BRSE11 6268 umbrella Pisonia umbellifera PIUM2 8217 song of India Dracaena reflexa DRRE6 6934 catchbirdtree soon Barringtonia racemosa BARA5 6221 umo Ochrosia oppositifolia NEOP 7942 sos Cerbera manghas CEMA20 6461 umpai Angiopteris evecta ANEV 6118 sosap Annona muricata ANMU2 6128 umukau Premna obtusifolia PROB 8307 soulu Plumeria rubra PLRU2 8271 umukau Premna spp. PREMN 8310 Appendix B: sour Fagraea berteroana FABE 7141 ungeh Allophylus triphyllus ALTE13 6084 sour sop Annona muricata ANMU2 6128 unknown dead Tree conifer 2TE 299 conifer srafohn Artocarpus altilis ARAL7 6171 unknown dead Tree hardwood 2TB 998 srah Ficus tinctoria FITI2 7176 hardwood srahl Tournefortia argentea TOAR2 8824 unknown live tree Tree unknown 2TREE 999 srifaf Terminalia catappa TECA 8750 utisel Musa textilis MUTE6 7877 srihfacf Terminalia catappa TECA 8750 varovaro Premna obtusifolia PROB 8307 TREE SPECIES LIST Sroal Bruguiera gymnorhiza BRSE11 6268 wach'guy Ficus tinctoria FITI2 7176 sruhsruh Tournefortia argentea TOAR2 8824 wapof Commersonia bartramia COBA17 6703 starfruit Averrhoa carambola AVCA 6198 wathol Barringtonia racemosa BARA5 6221 stinkingtoe Hymenaea courbaril HYCO 7442 weeku Casuarina equisetifolia CAEQ 6434 strand tree Terminalia litoralis TELI7 8753 weengu Calophyllum inophyllum CAIN4 6341 sugar apple Annona squamosa ANSQ 6131 weeping Callistemon viminalis CAVI23 6329 suhkasrihk Rhizophora apiculata RHAP2 8458 bottlebrush sumac Rhus taitensis RHTA 8469 weey Lumnitzera littorea LULI8 7602 syatak Elaeocarpus carolinensis ELCA20 6976 wehku Casuarina equisetifolia CAEQ 6434 pg.216 Common Name Scientific Name NRCS CodeCode wei Lumnitzera littorea LULI8 7602 weingal Lumnitzera littorea LULI8 7602 weipwul Morinda citrifolia MOCI3 7849 weku Casuarina equisetifolia CAEQ 6434 West Indian locust Hymenaea courbaril HYCO 7442 West Indies Swietenia mahagoni SWMA2 940 mahogany wih Barringtonia racemosa BARA5 6221 wihmar Barringtonia racemosa BARA5 6221 wihnmar Barringtonia racemosa BARA5 6221 wihnmar Barringtonia asiatica BAAS3 6220 wihnsed Barringtonia asiatica BAAS3 6220 win Terminalia samoensis TESA2 8759 wir Musa spp. MUSA2 7876 wong Bruguiera gymnorhiza BRSE11 6268 wumwukaw Premna serratifolia PRSE6 8309 yaawo yewan Ficus virens FIVI3 7179 yamgur Xylocarpus granatum XYGR 8903 yar Premna obtusifolia PROB 8307 yarakaak Senna alata SEAL4 8588 yibung Polyscias guilfoylei POGU 8284 yiiy Lumnitzera littorea LULI8 7602 ylang ylang Cananga odorata CAOD 6370 zwobolt Heritiera littoralis HELI9 7359 zwobott Heritiera littoralis HELI9 7359

E

REE SPECIES LIST BY COMMON NAM

FSM T

:

Section B.2 pg.217 SECTION B.3 FSM TREE SPECIES New NIMSOld NIMS NRCS Scientific LIST BY NEW NIMS CODE 999 9020 2TREE Tree unknown 999 9030 2TREE Tree unknown New NIMSOld NIMS NRCS Scientific 999 9999 2TREE Tree unknown 50 50 CUPRE Cupressus spp. 999 9015 2TREE Tree unknown 100 8189 PINUS Pinus spp. 5261 BAGA2 Bactris gasipaes 299 299 2TE Tree conifer 6002 6002 ACAN10 Acacia aneura 300 6016 ACACI Acacia spp. 6003 49 ACAU Acacia auriculiformis 303 303 ACFA Acacia farnesiana 6004 278 ACCO Acacia confusa 341 60 AIAL Ailanthus altissima 6006 281 ACKO Acacia koa 350 6087 ALNUS Alnus spp. 6007 6007 ACKO2 Acacia koaia 460 1220 CELTI Celtis spp. 6009 6009 ACMA12 Acacia mangium 510 7055 EUCAL Eucalyptus spp. 6010 6009 ACME80 Acacia mearnsii 511 213 EUGL Eucalyptus globulus 6011 6010 ACME Acacia melanoxylon 512 61 EUCA2 Eucalyptus camaldulensis 6014 6013 ACPA81 Acacia parramattensis 513 EUGR12 Eucalyptus grandis 6028 400 ADPA Adenanthera pavonina 514 341 EURO2 Eucalyptus robusta 6029 6029 ADENA Adenanthera spp. 520 1350 DIOSP Diospyros spp. 6042 100 AGMA14 Aglaia mariannensis 541 62 FRAM2 Fraxinus americana 6043 800 AGPA19 Aglaia palauensis 681 172 MOAL Morus alba 6044 801 AGPO4 Aglaia ponapensis 712 PATO2 Paulownia tomentosa 6046 403 AGSA9 Aglaia samoensis 715 715 MAPA28 Maytenus palauica 6047 1020 AGLAI Aglaia spp. 718 718 OSTR Osmoxylon truncatum 6048 101 AICO2 Aidia cochinchinensis 720 8137 PERSE Persea spp. 6049 AIRA2 Aidia racemosa 755 8345 PROSO Prosopis spp. 6051 6051 AILAN Ailanthus spp. 764 191 PRPE3 Prunus persica 6057 405 ALCH2 Albizia chinensis 800 800 QUERC Quercus spp. 6058 802 ALFA5 Albizia falcataria 855 1210 CASUA Casuarina spp. 6059 102 ALLE Albizia lebbeck 856 63 CAGL11 Casuarina glauca 6061 803 ALRE Albizia retusa 858 50 CICA Cinnamomum camphora 6062 6059 ALSA10 Albizia saponaria 860 1250 CITRU2 Citrus spp. 6063 1010 ALBIZ Albizia spp. 865 835 COSE2 Cordia sebestena 6069 6067 ALMA Alectryon macrococcus 885 569 MAIN3 Mangifera indica 6069 6070 ALMA Alectryon macrococcus 887 64 PIPI3 Piscidia piscipula 6069 6071 ALMA Alectryon macrococcus 888 198 SCAC2 Schefflera actinophylla 6072 406 ALSA12 Elattostachys falcata 896 143 SYCU Syzygium cumini 6073 6073 ALECT Alectryon spp. 896 65 SYCU Syzygium cumini 6075 407 ALMO2 Aleurites moluccana 897 203 TAIN2 Tamarindus indica 6075 6076 ALMO2 Aleurites moluccana 908 466 CONU Cocos nucifera 6077 1030 ALEUR Aleurites spp. 940 959 SWMA2 Swietenia mahagoni 6078 103 ALTR11 Aleurites trisperma 974 ULPU Ulmus pumila 6083 1040 ALLOP Allophylus spp. 987 987 COER2 Conocarpus erectus 6084 6084 ALTE13 Allophylus triphyllus 989 632 RHMA2 Rhizophora mangle 6084 804 ALTE13 Allophylus ternatus 992 885 MEQU Melaleuca quinquenervia 6085 408 ALTI2 Allophylus timorensis 993 993 MEAZ Melia azedarach 6086 6086 ALNE2 Alnus nepalensis

994 TRSE6 Triadica sebifera 6088 805 ALCA21 Alphitonia carolinensis Appendix B: 998 998 2TB Tree hardwood 6089 6089 ALPO3 Alphitonia ponderosa 999 999 2TREE Tree unknown 6090 1050 ALPHI Alphitonia spp. 999 9000 2TREE Tree unknown 6091 409 ALZI Alphitonia zizyphoides 999 9001 2TREE Tree unknown 6095 6094 ALMA16 Alstonia macrophylla 999 9002 2TREE Tree unknown 6096 410 ALPA22 Alstonia pacifica 999 9003 2TREE Tree unknown 6097 6097 ALSTO Alstonia spp. 999 9004 2TREE Tree unknown 6107 104 ANOC Anacardium occidentale 999 9005 2TREE Tree unknown 6109 411 ANIN13 Anacolosa insularis TREE SPECIES LIST 999 9006 2TREE Tree unknown 6118 806 ANEV Angiopteris evecta 999 9007 2TREE Tree unknown 6124 10 ANCH9 Annona cherimola 999 9008 2TREE Tree unknown 6128 412 ANMU2 Annona muricata 999 9009 2TREE Tree unknown 6129 105 ANRE Annona reticulata 999 9010 2TREE Tree unknown 6130 1060 ANNON Annona spp. 999 9011 2TREE Tree unknown 6131 413 ANSQ Annona squamosa 999 9012 2TREE Tree unknown 6135 6135 ANKA Antidesma kapuae 999 9013 2TREE Tree unknown 6137 106 ANBU3 Antidesma bunius 999 9014 2TREE Tree unknown 6138 972 ANKU3 Antidesma kusaiense pg.218 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 6139 6136 ANPL2 Antidesma platyphyllum 6247 6248 BOFR2 Bocconia frutescens 6139 6140 ANPL2 Antidesma platyphyllum 6248 6248 BOCCO Bocconia spp. 6139 6141 ANPL2 Antidesma platyphyllum 6250 433 BOVI7 Boehmeria virgata 6142 6139 ANPO8 Antidesma ponapense 6260 6260 BRAR6 Broussaisia arguta 6143 6140 ANPU2 Antidesma pulvinatum 6262 434 BRPA4 Broussonetia papyrifera 6144 415 ANSP14 Antidesma sphaerocarpum 6264 6264 BRCA12 Brugmansia candida 6145 1070 ANTID Antidesma spp. 6267 6267 BRPA15 Bruguiera parviflora 6148 416 ANIN2 Antirhea inconspicua 6268 435 BRSE11 Bruguiera gymnorhiza 6154 6154 ARAN15 Araucaria angustifolia 6268 435 BRSE11 Bruguiera sexangula 6155 107 ARCO32 Araucaria columnaris 6269 6269 BRUGU Bruguiera spp. 6156 111 AREX4 Araucaria excelsa 6277 810 BUEN Buchanania engleriana 6157 108 ARHE12 Araucaria heterophylla 6278 436 BUME4 Buchanania merrillii 6158 1080 ARAUC2 Araucaria spp. 6279 811 BUPA16 Buchanania palawensis 6159 6159 ARAL Archontophoenix alexandrae 6280 1150 BUCHA Buchanania spp. 6161 6161 AREL4 Ardisia elliptica 6286 6287 BUAS Buddleja asiatica 6166 6166 ARDIS Ardisia spp. 6299 437 BURI3 Burckella richii 6167 417 ARCA41 Areca catechu 6318 6318 CAKA5 Caesalpinia kavaiensis 6169 109 ARPI6 Arenga pinnata 6320 114 CASA28 Caesalpinia sappan 6171 293 ARAL7 Artocarpus altilis 6329 CAVI23 Callistemon viminalis 6173 294 ARHE2 Artocarpus heterophyllus 6341 440 CAIN4 Calophyllum inophyllum 6175 110 ARMA28 Artocarpus mariannensis 6342 439 CANE31 Calophyllum neo-ebudicum 6176 295 ARNO Artocarpus nobilis 6343 812 CAPE15 Calophyllum pelewense 6177 419 AROD2 Artocarpus odoratissimus 6344 813 CASO12 Calophyllum soulattri 6178 1090 ARTOC Artocarpus spp. 6345 1160 CALOP Calophyllum spp. 6179 420 ARBR11 Arytera brackenridgei 6346 6345 CAPR Calotropis procera 6181 421 ASDI14 Ascarina diffusa 6347 6347 CALOT Calotropis spp. 6185 422 ASNA10 Astronidium navigatorum 6366 814 CABR18 Campnosperma brevipetiolatum 6186 807 ASPA37 Astronidium palauense 6367 814 CABR42 Campnosperma brevipetiolata 6187 423 ASPI11 Astronidium pickeringii 6370 441 CAOD Cananga odorata 6188 424 ASSA23 Astronidium samoense 6372 443 CAHA39 Canarium mafoa 6189 1100 ASTRO4 Astronidium spp. 6373 815 CAHI14 Canarium hirsutum 6190 425 ASSU31 Astronidium subcordata 6374 816 CAIN42 Canarium indicum 6193 426 ATRA2 Atuna racemosa 6375 444 CAOV7 Canarium ovatum 6197 427 AVBI Averrhoa bilimbi 6377 1170 CANAR2 Canarium spp. 6198 428 AVCA Averrhoa carambola 6378 446 CAVI26 Canarium vitiense 6199 1110 AVERR Averrhoa spp. 6381 447 CAME35 Psydrax merrillii 6200 707 AVAL Avicennia marina subsp. Marina 6395 448 CAPA23 Carica papaya 6200 707 AVAL Avicennia alba 6396 6396 CARIC Carica spp. 6203 6204 AVMA3 Avicennia marina 6397 6397 CARE22 Carmona retusa 6203 695 AVMA3 Avicennia marina 6398 6398 CARMO Carmona spp. 6205 1120 AVICE Avicennia spp. 6399 817 CAMI36 Caryota mitis 6206 AZIN2 Azadirachta indica 6400 1180 CARYO Caryota spp. 6208 429 BATA Baccaurea taitensis 6401 115 CAUR3 Caryota urens 6213 808 BAPA8 Badusa palauensis 6405 818 CACA28 Casearia cauliflora 6215 6215 BAMBU Bambusa spp. 6408 1190 CASEA Casearia spp. 6216 6216 BAVU2 Bambusa vulgaris 6415 450 CAFI3 Cassia fistula 6220 430 BAAS3 Barringtonia asiatica 6417 819 CAGR11 Cassia grandis 6221 112 BARA5 Barringtonia racemosa 6418 116 CAJA3 Cassia javanica 6222 431 BASA9 Barringtonia samoensis 6420 820 CASI4 Cassia siamea 6223 1130 BARRI Barringtonia spp. 6422 1200 CASSI Cassia spp. 6225 809 BABI6 Bauhinia binata 6430 451 CAEL5 Castilla elastica 6226 113 BAMO2 Bauhinia monandra 6433 6433 CACU8 Casuarina cunninghamiana 6230 1140 BAUHI Bauhinia spp. 6434 452 CAEQ Casuarina equisetifolia

REE SPECIES LIST BY NEW NIMS CODE 6236 432 BIJA Bischofia javanica 6437 117 CALI8 Casuarina litorea 6237 6237 BISCH Bischofia spp. 6439 118 CALO8 Catalpa longissima 6238 6238 BIOR Bixa orellana 6441 6441 CEOB Cecropia obtusifolia

FSM T

: 6239 6239 BIXA Bixa spp. 6444 6444 CECRO Cecropia spp. 6242 6242 BOBR3 Bobea brevipes 6445 6445 CEOD Cedrela odorata 6243 6243 BOEL3 Bobea elatior 6449 119 CEPE2 Ceiba pentandra 6244 6244 BOSA2 Bobea sandwicensis 6452 821 CEPA6 Celtis paniculata 6245 6245 BOBEA Bobea spp. 6459 120 CEDI12 Cerbera dilatata 6246 6245 BOTI Bobea timonioides 6460 822 CEFL2 Cerbera floribunda

Section B.3 pg.219 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 6461 454 CEMA20 Cerbera manghas 6567 6570 CISP3 Citharexylum spinosum 6462 CEOD2 Cerbera odollam 6568 6568 CITHA Citharexylum spp. 6463 6463 CERBE Cerbera spp. 6570 460 CISA2 Citronella samoensis 6469 6469 CEHI3 Cereus hildmannianus 6572 461 CIAU Citrus aurantifolia 6470 6470 CEREU Cereus spp. 6574 121 CIAU8 Citrus aurantium 6472 708 CETA2 Ceriops tagal 6575 124 CILI5 Citrus limon 6473 6473 CEAU2 Cestrum aurantiacum 6577 464 CISI3 Citrus sinensis 6474 6474 CEDI6 Cestrum diurnum 6578 122 CIGR Citrus grandis 6477 6477 CENO Cestrum nocturnum 6579 212 CIHY2 Citrus hystrix 6478 6478 CESTR Cestrum spp. 6580 125 CIMA10 Citrus macroptera 6482 6482 CHAT2 Chamaesyce atrococca 6581 462 CIMA5 Citrus maxima 6483 6483 CHCE Chamaesyce celastroides 6582 126 CIME3 Citrus medica 6483 6484 CHCE Chamaesyce celastroides 6583 826 CIMI3 Citrus mitis 6483 6485 CHCE Chamaesyce celastroides 6584 463 CIRE3 Citrus reticulata 6483 6486 CHCE Chamaesyce celastroides 6586 827 CLCA15 Claoxylon carolinianum 6483 6487 CHCE Chamaesyce celastroides 6588 828 CLFA6 Claoxylon fallax 6483 6488 CHCE Chamaesyce celastroides 6589 829 CLLO5 Claoxylon longiracemosum 6483 6489 CHCE Chamaesyce celastroides 6590 127 CLMA25 Claoxylon marianum 6483 6490 CHCE Chamaesyce celastroides 6591 6595 CLSA Claoxylon sandwicense 6483 6491 CHCE Chamaesyce celastroides 6592 1260 CLAOX Claoxylon spp. 6492 6492 CHHE3 Chamaesyce herbstii 6593 830 CLCA18 Cleistanthus carolinianus 6493 6493 CHKU Chamaesyce kuwaleana 6594 831 CLIN8 Cleistanthus insularis 6494 6494 CHOL3 Chamaesyce olowaluana 6595 1270 CLEIS5 Cleistanthus spp. 6495 6495 CHRO2 Chamaesyce rockii 6596 6596 CLLE3 Clermontia leptoclada 6496 6496 CHAMA1 Chamaesyce spp. 6597 6602 CLAR4 Clermontia arborescens 5 6601 6606 CLCL Clermontia clermontioides 6497 6499 CHDE3 Charpentiera densiflora 6604 6609 CLDR2 Clermontia drepanomorpha 6498 6500 CHEL Charpentiera elliptica 6605 6610 CLFA Clermontia fauriei 6499 6501 CHOB2 Charpentiera obovata 6606 6611 CLGR3 Clermontia grandiflora 6500 6502 CHOV2 Charpentiera ovata 6610 6615 CLHA4 Clermontia hawaiiensis 6500 6501 CHOV2 Charpentiera ovata 6611 6616 CLKA Clermontia kakeana 6503 6503 CHARP Charpentiera spp. 6612 6617 CLKO Clermontia kohalae 6504 6505 CHTO3 Charpentiera tomentosa 6613 6618 CLLI3 Clermontia lindseyana 6504 6506 CHTO3 Charpentiera tomentosa 6614 6619 CLMI3 Clermontia micrantha 6507 6510 CHDO3 Cheirodendron dominii 6615 6620 CLMO5 Clermontia montis-loa 6508 6508 CHFA Cheirodendron fauriei 6616 6621 CLOB2 Clermontia oblongifolia 6509 6509 CHFO4 Cheirodendron forbesii 6620 6625 CLPA6 Clermontia pallida 6510 6510 CHPL Cheirodendron platyphyllum 6621 6626 CLPA8 Clermontia parviflora 6510 6512 CHPL Cheirodendron platyphyllum 6622 6627 CLPE2 Clermontia peleana 6513 6513 CHEIR Cheirodendron spp. 6625 6630 CLPE3 Clermontia persicifolia 6514 6514 CHTR2 Cheirodendron trigynum 6626 6631 CLPY2 Clermontia pyrularia 6514 6515 CHTR2 Cheirodendron trigynum 6627 6632 CLSI3 Clermontia singuliflora 6514 6516 CHTR2 Cheirodendron trigynum 6628 6628 CLERM Clermontia spp. 6517 6521 CHOA Chenopodium oahuense 6629 6633 CLTU2 Clermontia tuberculata 6518 6518 CHENO Chenopodium spp.

6630 6634 CLWA2 Clermontia waimeae Appendix B: 6525 456 CHVI22 Chionanthus vitiensis 6632 6641 CLCH4 Clerodendrum chinense 6541 457 CHCA10 Chrysophyllum cainito 6633 6642 CLGL2 Clerodendrum glabrum 6542 6545 CHOL Chrysophyllum oliviforme 6634 6643 CLIN Clerodendrum indicum 6545 6545 CIHE7 Cibotium heleniae 6635 6644 CLMA24 Clerodendrum macrostegium 6546 6550 CICH Cibotium chamissoi 6636 6636 CLERO2 Clerodendrum spp. 6547 6551 CIGL Cibotium glaucum 6645 CLCA21 Clinostigma carolinense 6548 6552 CIME8 Cibotium menziesii 6651 6660 CLRO Clusia rosea 6549 6549 CIBOT Cibotium spp. 6652 6652 CLUSI Clusia spp. TREE SPECIES LIST 6552 6557 CIPU Cinchona pubescens 6670 128 COUV Coccoloba uvifera 6553 6553 CINCH Cinchona spp. 6681 6681 COCOS Cocos spp. 6555 6559 CIBU2 Cinnamomum burmannii 6684 129 COAR2 Coffea arabica 6557 823 CICA2 Cinnamomum carolinense 6685 CORO8 Coffea robusta 6561 824 CIPE6 Cinnamomum pedatinervium 6686 130 COLI8 Coffea liberica 6562 825 CISE2 Cinnamomum sessilifolium 6687 1280 COFFE Coffea spp. 6563 1240 CINNA2 Cinnamomum spp. 6691 832 COSC13 Colona scabra 6564 458 CIVE2 Cinnamomum verum 6693 COAR3 Colubrina arborescens 6565 6569 CICA8 Citharexylum caudatum 6694 6702 COAS3 Colubrina asiatica pg.220 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 6697 6704 COOP Colubrina oppositifolia 6827 6836 CYSO2 Cyanea solenocalyx 6699 6699 COLUB Colubrina spp. 6828 6828 CYANE Cyanea spp. 6702 833 COTE15 Combretum tetralophum 6829 6837 CYST5 Cyanea stictophylla 6703 468 COBA17 Commersonia bartramia 6830 6838 CYSU8 Cyanea superba 6709 6709 CONOC Conocarpus spp. 6833 6841 CYTR6 Cyanea tritomantha 6716 6716 COFO2 Coprosma foliosa 6837 6849 CYCO18 Cyathea cooperi 6717 6723 COKA Coprosma kauensis 6838 386 CYDE16 Cyathea decurrens 6718 6724 COLO4 Coprosma longifolia 6840 691 CYLU5 Cyathea lunulata 6719 6725 COMO3 Coprosma montana 6841 387 CYME12 Cyathea medullaris 6720 6726 COOC3 Coprosma ochracea 6842 836 CYNI7 Cyathea nigricans 6721 6727 COPU8 Coprosma pubens 6844 837 CYPO11 Cyathea ponapeana 6722 6728 CORH Coprosma rhynchocarpa 6847 1320 CYATH Cyathea spp. 6724 1290 COPRO Coprosma spp. 6847 481 CYATH Cyathea spp. 6726 6731 COWA4 Coprosma waimeae 6849 482 CYTR11 Cyathea truncata 6729 471 COAS6 Cordia aspera 6852 134 CYCI3 Cycas micronesica 6731 6738 COCO5 Cordia collococca 6852 134 CYCI3 Cycas circinalis 6733 131 CODI18 Cordia dichotoma 6853 838 CYRE11 Cycas revoluta 6736 834 COMI6 Cordia micronesica 6854 1330 CYCAS Cycas spp. 6741 1300 CORDI Cordia spp. 6855 483 CYBA7 Cyclophyllum barbatum 6742 472 COSU2 Cordia subcordata 6858 135 CYRA8 Cynometra ramiflora 6744 6752 COFR2 Cordyline fruticosa 6859 CYYO Cynometra yokotae 6745 6745 CORDY2 Cordyline spp. 6860 136 CYBE3 Cyphomandra betacea 6749 6757 COCA48 Corymbia calophylla 6863 CYPU13 Cyrtandra pulchella 6750 6758 COCI4 Corymbia citriodora 6864 6864 CYRA3 Cyrtandra ramosissima 6751 6759 COFI7 Corymbia ficifolia 6865 6878 CYGI3 Cyrtandra giffardii 6752 6760 COGU4 Corymbia gummifera 6866 6866 CYRTA Cyrtandra spp. 6754 6763 COLA6 Corynocarpus laevigatus 6868 DARE6 Dalbergia retusa 6755 6755 CORYN2 Corynocarpus spp. 6870 DATU Dalbergia tucurensis 6756 11 COGU3 Couroupita guianensis 6875 6888 DEFA Delissea fallax 6758 473 CRRE12 Crateva religiosa 6876 6889 DELA4 Delissea laciniata 6760 132 CRAL11 Crescentia alata 6877 6890 DENI Delissea niihauensis 6769 474 CRBI9 Crossostylis biflora 6880 6893 DEPA9 Delissea parviflora 6771 12 CRLO3 Crotalaria longirostrata 6881 6881 DELIS Delissea spp. 6772 CROTO Croton sp. 6882 6894 DEUN2 Delissea undulata 6778 6786 CROR5 Cryptocarya oreophila 6883 485 DERE Delonix regia 6779 475 CREL8 Cryptocarya elegans 6884 6884 DELON Delonix spp. 6781 6790 CRMA8 Cryptocarya mannii 6885 486 DEHA5 Dendrocnide harveyi 6783 1310 CRYPT2 Cryptocarya spp. 6886 137 DELA13 Dendrocnide latifolia 6784 478 CRTU4 Cryptocarya turbinata 6887 1340 DENDR1 Dendrocnide spp. 6786 133 CRJA3 Cryptomeria japonica 6 6787 6787 CRYPT4 Cryptomeria spp. 6891 138 DIAL13 Dictyosperma album 6795 6795 CULU2 Cupressus lusitanica 6898 6911 DISU11 Dillenia suffruticosa 6796 6796 CUSE2 Cupressus sempervirens 6900 6913 DIBL3 Diospyros blancoi 6800 6809 CYAC4 Cyanea aculeatiflora 6902 487 DIDI9 Diospyros discolor 6801 6810 CYAR10 Cyanea arborea 6903 488 DIEB2 Diospyros ebenum 6802 6811 CYFI6 Cyanea fissa 6904 489 DIEL3 Diospyros elliptica 6805 6814 CYFL4 Cyanea floribunda 6905 839 DIFE5 Diospyros ferrea 6806 6815 CYGI5 Cyanea giffardii 6906 6919 DIHI4 Diospyros hillebrandii 6807 6816 CYHA6 Cyanea hamatiflora 6907 140 DIKA2 Diospyros kaki 6810 6819 CYHA7 Cyanea hardyi 6910 491 DISA16 Diospyros samoensis 6811 6820 CYHO6 Cyanea horrida 6911 6924 DISA10 Diospyros sandwicensis 6812 6821 CYKU3 Cyanea kuhihewa 6921 141 DIPO Discocalyx ponapensis 6813 6822 CYKU Cyanea kunthiana 6927 712 DOVI Dodonaea viscosa

REE SPECIES LIST BY NEW NIMS CODE 6814 6823 CYLE5 Cyanea leptostegia 6928 840 DOSP3 Dolichandrone spathacea 6815 6824 CYMA10 Cyanea macrostegia 6930 6945 DOHE2 Dovyalis hebecarpa 6818 6827 CYMA14 Cyanea marksii 6933 713 DRMU2 Dracaena multiflora

FSM T

: 6819 6828 CYPI4 Cyanea pilosa 6934 DRRE6 Dracaena reflexa 6822 6831 CYPO5 Cyanea pohaku 6936 DRDO3 Drypetes dolichocarpa 6823 6832 CYPR8 Cyanea procera 6941 842 DRNI3 Drypetes nitida 6824 6833 CYPY Cyanea pycnocarpa 6942 1360 DRYPE Drypetes spp. 6825 6834 CYQU Cyanea quercifolia 6943 493 DRVI5 Drypetes vitiensis 6826 6835 CYRI4 Cyanea rivularis 6944 6944 DUDE Dubautia demissifolia

Section B.3 pg.221 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 6945 6945 DUFA2 Dubautia fallax 7056 7072 EUTE Eucalyptus tereticornis 6946 6946 DUMO2 Dubautia montana 7057 7073 EUVI Eucalyptus viminalis 6947 6963 DUAR Dubautia arborea 7059 848 EUAQ Eugenia aquea 6948 6964 DUKN Dubautia knudsenii 7065 849 EUCA16 Eugenia caryophyllus 6952 6968 DUMI Dubautia microcephala 7078 144 EUJA4 Eugenia javanica 6953 6969 DUPL Dubautia plantaginea 7079 7098 EUKO Eugenia koolauensis 6957 6973 DURE2 Dubautia reticulata 7082 145 EUMA5 Eugenia malaccensis 6958 6958 DUBAU Dubautia spp. 7086 850 EUNI2 Eugenia nitida 6961 6979 DUER Duranta erecta 7087 851 EUPA3 Eugenia palauensis 6965 494 DUZI Durio zibethinus 7088 214 EUPA28 Eugenia palumbis 6966 13 DYLU Dypsis lutescens 7091 512 EURE7 Eugenia reinwardtiana 6968 496 DYHU2 Dysoxylum huntii 7096 1410 EUGEN Eugenia spp. 6969 497 DYMA Dysoxylum maota 7099 146 SYST3 Syzygium stelechanthum 6970 498 DYSA Dysoxylum samoense 7101 852 EUSU9 Eugenia suzukii 6971 1370 DYSOX Dysoxylum spp. 7102 147 EUTH4 Eugenia thompsonii 6973 843 ELGU Elaeis guineensis 7104 513 EUUN2 Eugenia uniflora 6975 6993 ELBI Elaeocarpus bifidus 7110 7131 EUHA2 Euphorbia haeleeleana 6976 844 ELCA20 Elaeocarpus carolinensis 7112 15 EUNE4 Euphorbia neriifolia 6977 501 ELFL6 Elaeocarpus floridanus 7114 7135 EUPU9 Euphorbia pulcherrima 6978 502 ELGR Elaeocarpus graeffei 7115 7115 EUPHO Euphorbia spp. 6979 503 ELGR6 Elaeocarpus grandis 7116 7136 EUTI Euphorbia tirucalli 6980 142 ELJO Elaeocarpus joga 7117 514 EULO7 Euphoria longana 6981 845 ELKE Elaeocarpus kerstingianus 7119 7141 EUSA6 Eurya sandwicensis 6982 846 ELKU Elaeocarpus kusanoi 7120 7120 EURYA Eurya spp. 6983 1380 ELAEO Elaeocarpus spp. 7123 854 EUHO5 Euodia hortensis 6984 705 ELTO4 Elaeocarpus tonganus 7124 855 EUNI8 Euodia nitida 6985 504 ELUL Elaeocarpus ulianus 7125 856 EUPA29 Euodia palawensis 6990 505 ELFA3 Elattostachys falcata 7126 857 EUPO15 Euodia ponapensis 6990 6072 ELFA3 Elattostachys falcata 7127 1420 EUODI Euodia spp. 6992 506 ELDU3 Eleocharis dulcis 7128 858 EUTR13 Euodia trichantha 6994 507 ENEL Endiandra elaeocarpa 7129 515 EXAG Excoecaria agallocha 6996 6996 ENCY Enterolobium cyclocarpum 7131 7154 EXGA Exocarpos gaudichaudii 6998 329 ERJA3 Eriobotrya japonica 7132 7132 EXOCA Exocarpos spp. 6999 6999 ERIOB Eriobotrya spp. 7133 859 EXPO2 Exorrhiza ponapensis 7008 508 ERFU2 Erythrina fusca 7141 516 FABE Fagraea berteroana 7012 7031 ERSA11 Erythrina sandwicensis 7142 860 FAKS Fagraea ksid 7013 1390 ERYTH Erythrina spp. 7143 1430 FAGRA Fagraea spp. 7014 509 ERSU15 Erythrina subumbrans 7144 7166 FAMO Falcataria moluccana 7016 510 ERVAO Erythrina variegata 7145 7145 FALCA2 Falcataria spp. 7017 511 ERAC10 Erythrospermum 7150 FIBE Ficus benjamina acuminatissimum 7151 149 FICA Ficus carica 7025 7046 EUBO2 Eucalyptus botryoides 7152 FICO2 Ficus copiosa 7026 7047 EUBR2 Eucalyptus bridgesiana 7155 150 FIEL Ficus elastica 7028 7048 EUCI80 Eucalyptus cinerea 7156 517 FIGO Ficus godeffroyi 7030 7050 EUCL Eucalyptus cladocalyx

7160 352 FIMI2 Ficus microcarpa Appendix B: 7031 7051 EUCO3 Eucalyptus cornuta 7162 7182 FINO3 Ficus nota 7032 7052 EUCR Eucalyptus crebra 7163 518 FIOB3 Ficus obliqua 7033 7053 EUDE Eucalyptus deanei 7165 519 FIPR2 Ficus prolixa 7034 339 EUDE2 Eucalyptus deglupta 7167 16 FIRU4 Ficus rubiginosa 7038 7057 EUGO Eucalyptus gomphocephala 7168 861 FISA Ficus saffordii 7039 7058 EUGO2 Eucalyptus goniocalyx 7169 520 FISC3 Ficus scabra 7041 7059 EUHE12 Eucalyptus hemiphloia 7171 1440 FICUS Ficus spp. 7044 7062 EUMA4 Eucalyptus marginata 7175 7192 FITH2 Ficus thonningii TREE SPECIES LIST 7045 7063 EUMI Eucalyptus microcorys 7176 521 FITI2 Ficus tinctoria 7046 7064 EUPA Eucalyptus paniculata 7178 522 FIUN Ficus uniauriculata 7047 340 EUPI Eucalyptus pilularis 7179 215 FIVI3 Ficus virens 7048 7066 EURA4 Eucalyptus raveretiana 7180 863 FICH Finschia chloroxantha 7049 7067 EURE2 Eucalyptus resinifera 7182 7203 FISP3 Fitchia speciosa 7051 7068 EURU2 Eucalyptus rudis 7186 216 FLRU2 Flacourtia rukam 7052 7069 EUSA17 Eucalyptus salicifolia 7188 7208 FLBR Flindersia brayleyana 7053 342 EUSA Eucalyptus saligna 7191 524 FLFL4 Flueggea flexuosa 7054 343 EUSI2 Eucalyptus sideroxylon 7192 7212 FLNE Flueggea neowawraea pg.222 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 7193 7193 FLUEG Flueggea spp. 7365 155 HEOV4 Hernandia ovigera 7200 7220 FRCA12 Frangula californica 7366 156 HESO Hernandia sonora 7206 7224 FRUH Fraxinus uhdei 7367 1510 HERNA Hernandia spp. 7207 7226 FUBO Fuchsia boliviana 7368 HELA27 Hernandia labyrinthica 7208 7227 FUPA2 Fuchsia paniculata 7370 7394 HEAR9 Hesperomannia arborescens 7209 7209 FUCHS Fuchsia spp. 7371 7395 HEAR10 Hesperomannia arbuscula 7210 525 FUEL Funtumia elastica 7372 7396 HELY Hesperomannia lydgatei 7211 603 PEAM3 Persea americana 7373 7373 HESPE8 Hesperomannia spp. 7214 526 GAMA10 Garcinia mangostana 7374 7398 HEAR5 Heteromeles arbutifolia 7215 864 GAMA8 Garcinia matsudai 7376 7376 HETER5 Heteromeles spp. 7216 527 GAMY Garcinia myrtifolia 7377 157 HEEL9 Heterospathe elata 7217 865 GAPO4 Garcinia ponapensis 7381 361 HEBR8 Hevea brasiliensis 7219 866 GARU3 Garcinia rumiyo 7384 7408 HIBO2 Hibiscadelphus bombycinus 7221 1450 GARCI Garcinia spp. 7385 7409 HICR Hibiscadelphus crucibracteatus 7224 7243 GABR Gardenia brighamii 7386 7410 HIDI Hibiscadelphus distans 7225 7244 GAMA6 Gardenia mannii 7387 7411 HIGI Hibiscadelphus giffardianus 7226 7245 GARE Gardenia remyi 7388 7412 HIHU Hibiscadelphus hualalaiensis 7227 7227 GARDE Gardenia spp. 7389 7406 HIPU2 Hibiscadelphus puakuahiwi 7228 7246 GATA Gardenia taitensis 7390 7390 HIBIS Hibiscadelphus spp. 7229 530 GAFL8 Garuga floribunda 7391 7413 HIWI Hibiscadelphus wilderianus 7233 531 GERU3 Geniostoma rupestre 7392 7414 HIWO Hibiscadelphus woodii 7241 532 GICE2 Gironniera celtidifolia 7393 7417 HIAR Hibiscus arnottianus 7245 7243 GLSE2 Gliricidia sepium 7397 7421 HIBR Hibiscus brackenridgei 7245 151 GLSE2 Gliricidia sepium 7401 7425 HICA6 Hibiscus calyphyllus 7247 533 GLCU Glochidion cuspidatum 7402 7426 HICL Hibiscus clayi 7248 702 GLMA9 Glochidion marianum 7403 7403 HIEL Hibiscus elatus 7249 706 GLRA4 Glochidion ramiflorum 7404 7428 HIKO Hibiscus kokio 7250 1460 GLOCH Glochidion spp. 7407 7431 HIMA5 Hibiscus macrophyllus 7251 869 GMEL Gmelina elliptica 7408 7432 HIMU3 Hibiscus mutabilis 7252 867 GMPA Gmelina palawensis 7411 7411 HIBIS2 Hibiscus spp. 7253 1470 GMELI Gmelina spp. 7412 548 HITI Hibiscus tiliaceus 7254 868 GNGN Gnetum gnemon 7413 7436 HIWA Hibiscus waimeae 7260 870 GOCA2 Goniothalamus carolinensis 7424 549 HOWH Homalium whitmeeanum 7262 7282 GOBA Gossypium barbadense 7427 872 HOAM2 Horsfieldia amklaal 7264 7283 GOHIH2 Gossypium hirsutum 7428 873 HONO2 Horsfieldia novoguineensis 7272 7293 GRBA Grevillea banksii 7429 970 HONU2 Horsfieldia nunu 7273 358 GRRO Grevillea robusta 7430 874 HOPA10 Horsfieldia palauensis 7274 7274 GREVI Grevillea spp. 7431 1520 HORSF2 Horsfieldia spp. 7275 535 GRCR4 Grewia crenata 7440 7440 HYLOC Hylocereus spp. 7279 152 GUOF Guaiacum officinale 7441 7464 HYUN3 Hylocereus undatus 7282 153 GUMA4 Guamia mariannae 7442 HYCO Hymenaea courbaril 7307 536 GUSP3 Guettarda speciosa 7448 7472 HYCA11 Hypericum canariense 7311 538 GURH Guioa rhoifolia 7453 7477 ILAN Ilex anomala 7312 1480 GUIOA Guioa spp. 7454 7478 ILAQ80 Ilex aquifolium 7313 871 GUPA Gulubia palauensis 7460 7483 ILPA3 Ilex paraguariensis 7319 539 GYAM2 Gyrocarpus americanus 7464 7464 ILEX Ilex spp. 7321 7343 HACA2 Haematoxylum campechianum 7472 INED Inga edulis 7332 540 HAFL Haplolobus floribundus 7475 550 INFA3 Inocarpus fagifer 7334 541 HAAR4 Harpullia arborea 7477 551 INBI Intsia bijuga 7338 542 HEDE14 Hedycarya denticulata 7482 18 JAMI Jacaranda mimosifolia 7340 1490 HEDYC2 Hedycarya spp. 7483 7483 JACAR Jacaranda spp. 7343 7365 HEFO5 Hedyotis fosbergii 7491 7514 JACU2 Jatropha curcas 7344 7366 HEHI8 Hedyotis hillebrandii 7494 7494 JATRO Jatropha spp.

REE SPECIES LIST BY NEW NIMS CODE 7345 7345 HEDYO2 Hedyotis spp. 7497 875 KAPA4 Kayea pacifica 7346 7367 HETE21 Hedyotis terminalis 7506 703 KLHO Kleinhovia hospita 7349 7371 HEPO4 Heliocarpus popayanensis 7509 7529 KOCO2 Kokia cookei

FSM T

: 7350 7350 HELIO Heliocarpus spp. 7510 7530 KODR Kokia drynarioides 7359 544 HELI9 Heritiera littoralis 7511 7531 KOKA Kokia kauaiensis 7360 154 HELO12 Heritiera longipetiolata 7512 7532 KOLA2 Kokia lanceolata 7362 1500 HERIT2 Heritiera spp. 7513 7513 KOKIA Kokia spp. 7363 546 HEMO13 Hernandia moerenhoutiana 7516 7537 KUER Kunzea ericoides 7364 547 HENY Hernandia nymphaeifolia 7517 7517 KUNZE Kunzea spp.

Section B.3 pg.223 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 7518 7539 LAFA2 Labordia fagraeoidea 7704 884 MECA21 Medusanthera carolinensis 7519 7540 LAHE2 Labordia hedyosmifolia 7705 575 MESA11 Medusanthera samoensis 7520 7541 LAHI5 Labordia hirtella 7706 1610 MEDUS2 Medusanthera spp. 7521 7542 LAKA Labordia kaalae 7709 7709 MELAL Melaleuca spp. 7522 7543 LALY2 Labordia lydgatei 7710 167 MEMU10 Melanolepis multiglandulosa 7523 7523 LABOR Labordia spp. 7712 7734 MECA9 Melastoma candidum 7524 7544 LATI2 Labordia tinifolia 7713 7735 MESA3 Melastoma sanguineum 7528 7548 LATR4 Labordia triflora 7716 7716 MELIA Melia spp. 7529 7549 LAWA3 Labordia waiolani 7719 7740 MEAN3 Melicope anisata 7533 554 LASP Lagerstroemia speciosa 7720 7741 MEBA2 Melicope balloui 7539 555 LADO2 Lansium domesticum 7721 7742 MEBA3 Melicope barbigera 7543 158 LALO Latania loddigesii 7722 7743 MECH2 Melicope christophersenii 7558 7579 LEMO20 Leptospermum morrisonii 7723 7744 MECI6 Melicope cinerea 7559 7580 LEPE23 Leptospermum petersonii 7724 7745 MECL Melicope clusiifolia 7560 7581 LEPO22 Leptospermum polygalifolim 7725 7746 MECR5 Melicope cruciata 7561 7582 LESC2 Leptospermum scoparium 7726 7747 MEEL2 Melicope elliptica 7562 7562 LEPTO4 Leptospermum spp. 7727 7748 MEHA7 Melicope haleakalae 7564 159 LEIN31 Leucaena insularum 7728 7749 MEHA3 Melicope haupuensis 7564 SCFO2 Schleinitzia fosbergii 7729 7750 MEHA4 Melicope hawaiensis 7565 556 LELE10 Leucaena leucocephala 7730 7751 MEHI6 Melicope hiiakae 7566 1530 LEUCA Leucaena spp. 7731 7752 MEHO2 Melicope hosakae 7575 7598 LISI Ligustrum sinense 7732 7753 MEKA2 Melicope kaalaensis 7576 7576 LIGUS2 Ligustrum spp. 7733 7754 MEKN Melicope knudsenii 7583 558 LICH4 Litchi chinensis 7734 7755 MEMA6 Melicope macropus 7586 560 LISA8 Litsea samoensis 7735 7756 MEMA7 Melicope makahae 7587 1540 LITSE Litsea spp. 7736 7757 MEMO6 Melicope molokaiensis 7588 160 LICH3 Livistona chinensis 7737 7758 MEMU4 Melicope mucronulata 7595 7620 LOCO9 Lophostemon confertus 7738 7759 MEOA Melicope oahuensis 7598 561 LUNE4 Lucuma nervosa 7739 7760 MEOB4 Melicope obovata 7602 562 LULI8 Lumnitzera littorea 7740 7761 MEOR4 Melicope orbicularis 7614 161 MAIN8 Macadamia integrifolia 7741 7762 MEOV Melicope ovalis 7616 1550 MACAD Macadamia spp. 7742 7763 MEOV2 Melicope ovata 7617 563 MATE16 Macadamia tetraphylla 7743 7764 MEPA6 Melicope pallida 7618 876 MACA25 Macaranga carolinensis 7744 7765 MEPA7 Melicope paniculata 7619 564 MAGR Macaranga grayana 7745 7766 MEPE9 Melicope peduncularis 7620 565 MAHA9 Macaranga harveyana 7746 7767 MEPS Melicope pseudoanisata 7621 7646 MAMA28 Macaranga mappa 7747 7768 MEPU4 Melicope puberula 7623 1560 MACAR Macaranga spp. 7748 7769 MEQU3 Melicope quadrangularis 7625 568 MAST7 Macaranga stipulosa 7749 7770 MERA2 Melicope radiata 7626 19 MATA3 Macaranga tanarius 7750 577 MERE8 Melicope latifolia 7627 162 MATH3 Macaranga thompsonii 7751 7772 MERO3 Melicope rotundifolia 7638 877 MAPA6 Mallotus palauensis 7752 7773 MESA4 Melicope saint-johnii 7639 7663 MAPH4 Mallotus philippensis 7753 7774 MESA5 Melicope sandwicensis 7641 1570 MALLO Mallotus spp. 7754 7754 MELIC3 Melicope spp.

7642 878 MATI4 Mallotus tiliifolius 7755 7775 MEVO Melicope volcanica Appendix B: 7653 570 MAGL12 Mammea glauca 7756 7776 MEWA2 Melicope waialealae 7654 163 MAOD2 Mammea odorata 7757 7777 MEWA4 Melicope wawraeana 7655 1580 MAMME Mammea spp. 7758 7778 MEZA Melicope zahlbruckneri 7657 879 MAMI3 Mangifera minor 7759 578 MESA9 Melicytus samoensis 7658 164 MAOD Mangifera odorata 7766 580 MEAR16 Melochia aristata 7659 1590 MANGI Mangifera spp. 7767 7767 MELOC Melochia spp. 7660 165 MAGL5 Manihot carthaginensis subsp. 7769 7793 MEUM3 Melochia umbellata Glaziovii 7770 7770 MEVIC4 Melochia villosissima var TREE SPECIES LIST 7661 7661 MANIH Manihot spp. compacta 7664 571 MADI14 Manilkara dissecta 7771 7771 MEVIV Melochia villosissima var 7666 880 MAHO5 Manilkara hoshinoi villosissima 7671 1600 MANIL Manilkara spp. 7774 168 MEME12 Merrilliodendron megacarpum 7672 882 MAUD Manilkara udoido 7776 581 MEMA16 Meryta macrophylla 7674 166 MAZA Manilkara zapota 7777 886 MESE11 Meryta senfftiana 7679 935 MACO Maranthes corymbosa 7778 1620 MERYT Meryta spp. 7680 883 MAFR11 Marattia fraxinea 7781 582 MEPOP2 Metrosideros collina 7700 MATH4 Maytenus thompsonii 7782 7806 MEMA4 Metrosideros macropus pg.224 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 7783 7807 MEPO5 Metrosideros polymorpha 7916 7943 MYFO Myrsine fosbergii 7783 7784 MEPO5 Metrosideros polymorpha 7918 7945 MYHE3 Myrsine helleri 7783 7785 MEPO5 Metrosideros polymorpha 7919 7946 MYKA Myrsine kauaiensis 7783 7786 MEPO5 Metrosideros polymorpha 7920 7947 MYKN Myrsine knudsenii 7783 7787 MEPO5 Metrosideros polymorpha 7921 7948 MYLA3 Myrsine lanaiensis 7783 7788 MEPO5 Metrosideros polymorpha 7922 7949 MYLE2 Myrsine lessertiana 7783 7789 MEPO5 Metrosideros polymorpha 7923 7950 MYME2 Myrsine mezii 7783 7790 MEPO5 Metrosideros polymorpha 7924 7951 MYPE3 Myrsine petiolata 7783 7791 MEPO5 Metrosideros polymorpha 7925 7952 MYPU2 Myrsine pukooensis 7792 7816 MERU2 Metrosideros rugosa 7926 7953 MYSA2 Myrsine sandwicensis 7793 7793 METRO Metrosideros spp. 7927 7927 MYRSI Myrsine spp. 7794 7817 METR5 Metrosideros tremuloides 7928 7954 MYWA Myrsine wawraea 7795 7818 MEWA Metrosideros waialealae 7942 591 NEOP Ochrosia oppositifolia 7798 169 MEAM4 Metroxylon amicarum 7942 591 NEOP Neisosperma oppositifolia 7799 887 MESA7 Metroxylon sagu 7948 592 NEFO2 Neonauclea forsteri 7800 1630 METRO2 Metroxylon spp. 7952 593 NELA7 Nephelium lappaceum 7801 583 MICH4 Michelia champaca 7953 NERA3 Nephelium ramboutan-ake 7805 7831 MICA20 Miconia calvescens 7954 7983 NEME5 Neraudia melastomifolia 7824 584 MIMI23 Micromelum minutum 7958 NEPO Nesoluma polynesicum 7831 585 MIPI9 Millettia pinnata 7960 7989 NESA2 Nestegis sandwicensis 7835 170 MIEL4 Mimusops elengi 7961 7961 NESTE Nestegis spp. 7841 7870 MOHI Montanoa hibiscifolia 7962 898 NECE Neuburgia celebica 7842 7842 MONTA Montanoa spp. 7964 7993 NIGL Nicotiana glauca 7845 7874 MOCE2 Morella cerifera 7965 7965 NICOT Nicotiana spp. 7846 7875 MOFA Morella faya 7966 7995 NOBR2 Nothocestrum breviflorum 7848 7848 MOREL2 Morella spp. 7967 7996 NOLA Nothocestrum latifolium 7849 586 MOCI3 Morinda citrifolia 7968 7997 NOLO Nothocestrum longifolium 7850 888 MOLA12 Morinda latibractea 7969 7998 NOPE Nothocestrum peltatum 7851 889 MOPE2 Morinda pedunculata 7970 7970 NOTHO3 Nothocestrum spp. 7852 1640 MORIN Morinda spp. 7971 8001 NOHU Nototrichium humile 7853 7880 MOTR Morinda trimera 7972 8002 NOSA Nototrichium sandwicense 7855 171 MOOL Moringa oleifera 7974 899 NYFR2 Nypa fruticans 7865 7892 MURA3 Munroidendron racemosum 7977 7977 OCHNA Ochna spp. 7867 173 MUCA4 Muntingia calabura 7978 8007 OCTH Ochna thomasiana 7868 7868 MUNTI Muntingia spp. 7980 900 OCPY Ochroma pyramidale 7870 MUKO Murraya koenigii 7982 8012 OCCO Ochrosia compta 7872 7872 MUPA3 Musa paradisiaca 7983 8013 OCHA Ochrosia haleakalae 7873 890 MUCO8 Musa coccinea 7984 8014 OCKA Ochrosia kauaiensis 7874 891 MUNA Musa nana 7985 8015 OCKI Ochrosia kilaueaensis 7875 892 MUSA Musa sapientum 7986 7986 OCHRO2 Ochrosia spp. 7876 1650 MUSA2 Musa spp. 7987 OCMA2 Ochrosia mariannensis 7877 893 MUTE6 Musa textilis 8000 OLNE Oleandra neriiformis 7878 894 MUTI Musa tikap 8004 8037 OLEU Olea europaea 7879 895 MUTR2 Musa troglodytarum 8007 8007 OLEA Olea spp. 7880 896 MUFR3 Mussaenda frondosa 8008 595 HOAC4 Homalanthus acuminatus 7881 588 MURA5 Mussaenda raiateensis 8009 596 HONU3 Homalanthus nutans 7882 1660 MUSSA Mussaenda spp. 8010 1680 HOMAL6 Homalanthus spp. 7883 7910 MYSA Myoporum sandwicense 8011 OPPA4 Ophiorrhiza palauensis 7884 7884 MYOPO Myoporum spp. 8013 8046 OPCO4 Opuntia cochenillifera 7892 7892 MYRCI Myrcia spp. 8014 8047 OPFI Opuntia ficus-indica 7894 MYCA9 Myrciaria cauliflora 8015 8048 OPMO5 Opuntia monacantha 7899 174 MYRU3 Myrica rubra 8018 8018 OPUNT Opuntia spp. 7900 7900 MYRIC Myrica spp. 8019 901 ORCA12 Ormosia calavensis

REE SPECIES LIST BY NEW NIMS CODE 7902 590 MYHY2 Myristica hypargyraea 8022 716 OSOL Osmoxylon oliveri 7903 897 MYIN3 Myristica insularis 8023 717 OSPA Osmoxylon pachyphyllum 7904 1670 MYRIS Myristica spp. 8024 1690 OSMOX Osmoxylon spp.

FSM T

: 7906 7901 MYIN4 Myristica inutilis 8036 902 PAAQ2 Pachira aquatica 7906 589 MYIN4 Myristica inutilis 8044 597 PAST24 Palaquium stehlinii 7910 7938 MYAL4 Myrsine alyxifolia 8054 903 PAAI Pandanus aimiriikensis 7913 7940 MYDE2 Myrsine degeneri 8055 905 PACO51 Pandanus cominsii 7914 7941 MYEM Myrsine emarginata 8056 906 PACO3 Pandanus compressus 7915 7942 MYFE Myrsine fernseei 8057 907 PACY10 Pandanus cylindricus

Section B.3 pg.225 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 8058 908 PADI2 Pandanus dilatatus 8207 8207 PIPTU Pipturus spp. 8059 909 PADI29 Pandanus divergens 8210 8210 PISCI Piscidia spp. 8060 175 PADU3 Pandanus dubius 8212 8249 PIBR3 Pisonia brunoniana 8061 910 PADU4 Pandanus duriocarpus 8213 606 PIGR6 Pisonia grandis 8062 911 PAEN Pandanus enchabiensis 8214 8251 PISA5 Pisonia sandwicensis 8063 912 PAFI Pandanus fischerianus 8215 1740 PISON Pisonia spp. 8064 176 PAFR7 Pandanus fragrans 8217 607 PIUM2 Pisonia umbellifera 8065 913 PAHO6 Pandanus hosinoi 8218 8254 PIWA2 Pisonia wagneriana 8066 914 PAJA3 Pandanus jaluitensis 8220 385 PIDU Pithecellobium dulce 8067 915 PAKA2 Pandanus kanehirae 8224 8224 PIMO4 Pittosporum monae 8068 916 PAKO2 Pandanus korrensis 8226 8265 PIAR4 Pittosporum argentifolium 8069 917 PALA3 Pandanus lakatwa 8227 8266 PICO4 Pittosporum confertiflorum 8070 918 PALA4 Pandanus laticanaliculatus 8228 8267 PIFL4 Pittosporum flocculosum 8071 919 PAMA3 Pandanus macrocephalus 8229 8268 PIGA2 Pittosporum gayanum 8072 920 PAMA32 Pandanus macrojeanneretia 8230 8269 PIGL4 Pittosporum glabrum 8073 921 PAME18 Pandanus menne 8231 8270 PIHA3 Pittosporum halophilum 8074 8074 PAKA Palaquium karrak 8232 8271 PIHA4 Pittosporum hawaiiense 8075 923 PAOD2 Pandanus odontoides 8233 8272 PIHO Pittosporum hosmeri 8076 924 PAPA38 Pandanus palawensis 8234 8273 PIKA3 Pittosporum kauaiense 8077 925 PAPA39 Pandanus patina 8235 8274 PINA Pittosporum napaliense 8078 926 PAPE Pandanus peliliuensis 8236 8275 PIPE8 Pittosporum pentandrum 8079 927 PAPO2 Pandanus ponapensis 8238 1750 PITTO Pittosporum spp. 8080 928 PAPU18 Pandanus pulposus 8239 8277 PITE5 Pittosporum terminalioides 8081 929 PARE2 Pandanus rectangulatus 8240 8278 PIUN2 Pittosporum undulatum 8082 598 PARE19 Pandanus reineckei 8241 8279 PIVI5 Pittosporum viridiflorum 8083 930 PARO2 Pandanus rotundatus 8242 610 PLGA2 Planchonella garberi 8084 1700 PANDA Pandanus spp. 8243 611 PLGR11 Planchonella grayana 8085 692 PATE2 Pandanus tectorius 8244 612 PLLI6 Planchonella linggensis 8086 931 PATO6 Pandanus tolotomensis 8246 614 PLSA9 Planchonella samoensis 8087 932 PATR Pandanus trukensis 8247 1760 PLANC Planchonella spp. 8088 933 PAUT Pandanus utilis 8248 615 PLTO2 Planchonella torricellensis 8090 934 PAVA4 Pandanus variegatus 8250 8291 PLRE4 Platydesma remyi 8091 178 PAED4 Pangium edule 8251 8292 PLSP3 Platydesma spathulata 8092 922 PAOB7 Pandanus obliquus 8252 8252 PLATY Platydesma spp. 8103 601 PAIN20 Parinari insularum 8257 8298 PLAU2 Pleomele aurea 8104 936 PALA5 Parinari laurina 8258 8299 PLAU5 Pleomele auwahiensis 8105 1710 PARIN Parinari spp. 8259 8300 PLFE Pleomele fernaldii 8107 8144 PAKO5 Parkia korom 8260 8301 PLFO2 Pleomele forbesii 8108 937 PAPA2 Parkia parvifoliola 8261 8302 PLHA3 Pleomele halapepe 8111 8149 PAAC3 Parkinsonia aculeata 8262 8303 PLHA4 Pleomele hawaiiensis 8112 8112 PARKI2 Parkinsonia spp. 8263 8263 PLEOM Pleomele spp. 8121 382 PEPT3 Peltophorum pterocarpum 8269 184 PLOBO Plumeria obtusa 8123 602 PEAC6 Pemphis acidula 8271 185 PLRU2 Plumeria rubra 8129 709 PEMO13 Pericopsis mooniana 8272 1770 PLUME Plumeria spp.

8131 8169 PESA3 Perrottetia sandwicensis 8283 701 POGR28 Polyscias grandifolia Appendix B: 8146 PHNI11 Phaleria nisidai 8284 POGU Polyscias guilfoylei 8151 20 PHCA13 Phoenix canariensis 8285 POMA Polyscias macgillivrayi 8152 179 PHDA4 Phoenix dactylifera 8286 939 PONO10 Polyscias nodosa 8153 1720 PHOEN2 Phoenix spp. 8287 619 POSA27 Polyscias samoensis 8154 180 PHSY3 Phoenix sylvestris 8288 21 POSC10 Polyscias scutellaria 8155 8190 PHDA5 Photinia davidiana 8289 1780 POLYS4 Polyscias spp. 8157 181 PHAC3 Phyllanthus acidus 8290 620 POPI12 Pometia pinnata 8159 8194 PHDI10 Phyllanthus distichus 8292 940 POHO Ponapea hosinoi TREE SPECIES LIST 8175 8210 PIDI2 Pimenta dioica 8293 941 POLE21 Ponapea ledermanniana 8178 183 PIRAG Pimenta racemosa 8294 1790 PONAP Ponapea spp. 8180 1730 PIMEN Pimenta spp. 8295 186 POPI4 Pongamia pinnata 8181 938 PIIN5 Pinanga insignis 8297 621 POCA43 Pouteria caimito 8183 8219 PICA18 Pinus caribaea 8298 942 POCA6 Pouteria calcarea 8187 8223 PIPA13 Pinus patula 8299 187 POCA23 Pouteria campechiana 8188 8224 PIPI6 Pinus pinaster 8303 188 PLOB5 Planchonella obovata 8205 8243 PIAL2 Pipturus albidus 8304 8341 POSA11 Pouteria sandwicensis 8206 605 PIAR8 Pipturus argenteus 8305 189 POSA13 Pouteria sapota pg.226 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 8306 1800 POUTE Pouteria spp. 8432 946 RAIN8 Rauvolfia insularis 8307 190 PROB Premna obtusifolia 8434 8475 RASA3 Rauvolfia sandwicensis 8308 943 PRPU5 Premna pubescens 8435 8435 RAUVO Rauvolfia spp. 8309 622 PRSE6 Premna serratifolia 8436 947 RAMA7 Ravenala madagascariensis 8310 1810 PREMN Premna spp. 8440 629 RELA Reynoldsia lanutoensis 8315 8352 PRAF Pritchardia affinis 8442 8483 RESA Reynoldsia sandwicensis 8316 8353 PRAR2 Pritchardia arecina 8443 1840 REYNO Reynoldsia spp. 8317 8354 PRBE Pritchardia beccariana 8456 631 RHED4 Rheedia edulis 8318 8318 PRFO Pritchardia forbesiana 8458 195 RHAP2 Rhizophora apiculata 8319 8319 PRHA2 Pritchardia hardyi 8460 720 RHLA12 Rhizophora lamarckii 8320 8357 PRHI Pritchardia hillebrandii 8462 196 RHMU Rhizophora mucronata 8321 8358 PRKA Pritchardia kaalae 8463 1850 RHIZO Rhizophora spp. 8322 8322 PRLA3 Pritchardia lanaiensis 8464 633 RHST8 Rhizophora stylosa 8323 8359 PRLA4 Pritchardia lanigera 8465 8465 RHODO2 Rhodomyrtus spp. 8324 8360 PRLI2 Pritchardia limahuliensis 8466 8505 RHTO10 Rhodomyrtus tomentosa 8325 8361 PRLO2 Pritchardia lowreyana 8467 8507 RHSA2 Rhus sandwicensis 8326 8362 PRMA5 Pritchardia martii 8468 8468 RHUS Rhus spp. 8327 8363 PRMI3 Pritchardia minor 8469 634 RHTA Rhus taitensis 8328 8364 PRMU3 Pritchardia munroi 8472 8512 RICO3 Ricinus communis 8329 623 PRPA11 Pritchardia pacifica 8473 8473 RICIN Ricinus spp. 8330 8366 PRPE7 Pritchardia perlmanii 8474 948 RICA16 Rinorea carolinensis 8331 8367 PRRE Pritchardia remota 8480 635 RODE5 Rollinia deliciosa 8336 8372 PRSC Pritchardia schattaueri 8490 197 ROEL Roystonea regia 8337 8337 PRITC Pritchardia spp. 8491 949 ROOL Roystonea oleracea 8338 8338 PRVI2 Pritchardia viscosa 8503 950 SAIN13 Samadera indica 8339 8374 PRWA Pritchardia waialealeana 8505 636 SASA10 Albizia saman 8341 8341 PRPE6 Procris pedunculata 8506 8506 SAMAN Samanea spp. 8343 8382 PRJU Prosopis juliflora 8509 8547 SANIC4 Sambucus nigra 8344 8383 PRPA4 Prosopis pallida 8510 8510 SAMBU Sambucus spp. 8355 8393 PSCA Psidium cattleianum 8515 637 SAKO4 Sandoricum koetjape 8356 624 PSGU Psidium guajava 8516 8556 SAEL2 Santalum ellipticum 8365 8402 PSFA Psychotria fauriei 8517 8557 SAFR4 Santalum freycinetianum 8366 8403 PSGR Psychotria grandiflora 8518 SAAL16 Santalum album 8368 PSCA18 Psychotria carolinensis 8521 8561 SAHA3 Santalum haleakalae 8369 8406 PSGR3 Psychotria greenwelliae 8522 8562 SAPA7 Santalum paniculatum 8370 8407 PSHA2 Psychotria hathewayi 8525 8554 SASA8 Santalum salicifolium 8373 8410 PSHA3 Psychotria hawaiiensis 8526 8526 SANTA Santalum spp. 8377 8414 PSHE2 Psychotria hexandra 8528 8568 SAOA3 Sapindus oahuense 8382 8419 PSHEO Psychotria hexandra ssp. 8529 8569 SASA4 Sapindus saponaria oahuensis 8531 8531 SAPIN Sapindus spp. 8386 8423 PSHO Psychotria hobdyi 8532 639 SAVI17 Sapindus vitiensis 8387 626 PSIN10 Psychotria insularum 8534 951 SAIN2 Sapium indicum 8388 8425 PSKA Psychotria kaduana 8544 640 SAPA35 Sarcopygme pacifica 8390 192 PSYMAR Psychotria mariana 8548 8548 SCCE3 Scaevola cerasifolia 8392 8429 PSMA6 Psychotria mariniana 8549 8588 SCCH3 Scaevola chamissoniana 8393 8430 PSMA7 Psychotria mauiensis 8550 8589 SCGA2 Scaevola gaudichaudiana 8398 971 PSRH2 Psychotria rhombocarpa 8551 8590 SCPR Scaevola procera 8399 193 PSRO2 Psychotria rotensis 8552 8552 SCAEV Scaevola spp. 8400 1820 PSYCH Psychotria spp. 8555 8555 SCHAE Schaefferia spp. 8401 8437 PSWA2 Psychotria wawrae 8559 642 SCSA10 Schefflera samoensis 8402 627 PSOD Psydrax odorata 8560 641 SCTA Scaevola taccada 8404 8445 PTKA Pteralyxia kauaiensis 8561 8601 SCMO Schinus molle 8405 8446 PTMA Pteralyxia macrocarpa 8563 224 SCTE Schinus terebinthifolius

REE SPECIES LIST BY NEW NIMS CODE 8406 8406 PTERA Pteralyxia spp. 8563 8564 SCTE Schinus terebinthifolius 8407 194 PTIN2 Pterocarpus indicus 8577 952 SCHY5 Scyphiphora hydrophyllacea 8412 973 PTLE3 Ptychococcus ledermannianus 8583 644 SEFL9 Securinega flexuosa

FSM T

: 8415 22 PTMA8 Ptychosperma macarthuri 8585 SEKR3 Semecarpus kraemeri 8416 945 PTPA Ptychosperma palauense 8586 953 SEVE4 Semecarpus venenosa 8418 1830 PTYCH4 Ptychosperma spp. 8588 8628 SEAL4 Senna alata 8424 8464 QUSU5 Quercus suber 8590 8630 SEGA2 Senna gaudichaudii 8430 628 RAMY Rapanea myricifolia 8591 8631 SEMU5 Senna multijuga 8431 RAVO Rauvolfia vomitoria 8592 8632 SEPE4 Senna pendula

Section B.3 pg.227 New NIMSOld NIMS NRCS Scientific New NIMSOld NIMS NRCS Scientific 8595 8635 SESE13 Senna septemtrionalis 8737 669 TASA2 Tarenna sambucina 8596 6420 SESI3 Senna siamea 8741 8782 TECA9 Tecoma castanifolia 8598 8598 SENNA Senna spp. 8743 961 TEST Tecoma stans 8599 8638 SESU10 Senna sulfurea 8744 962 TEGR Tectona grandis 8600 8639 SESU4 Senna surattensis 8745 8745 TECTO Tectona spp. 8601 954 SEKA2 Serianthes kanehirae 8748 1880 TERMI Terminalia spp. 8603 199 SENE9 Serianthes nelsonii 8749 963 TECA16 Terminalia carolinensis 8605 647 SEGR5 Sesbania grandiflora 8750 670 TECA Terminalia catappa 8606 8647 SESE8 Sesbania sesban 8751 964 TECR3 Terminalia crassipes 8607 8607 SESBA Sesbania spp. 8752 965 TEED Terminalia edulis 8608 8608 SHIN Shirakiopsis indica 8753 TELI7 Terminalia litoralis 8609 23 SIFA Sida fallax 8755 966 TEKA4 Terminalia kaernbachii 8610 8610 SIDA Sida spp. 8756 8797 TEMY Terminalia myriocarpa 8628 648 SOAM Solanum americanum 8758 673 TERI3 Terminalia richii 8631 8671 SOMA3 Solanum mauritianum 8759 674 TESA2 Terminalia samoensis 8635 8635 SOLAN Solanum spp. 8770 8813 TEFL5 Tetraplasandra flynnii 8636 8673 SOTO4 Solanum torvum 8771 8814 TEGY Tetraplasandra gymnocarpa 8639 200 SOAL10 Sonneratia alba 8772 8815 TEHA2 Tetraplasandra hawaiensis 8641 8680 SOCH Sophora chrysophylla 8773 8816 TEKA3 Tetraplasandra kavaiensis 8642 8642 SOPHO Sophora spp. 8774 8817 TEOA Tetraplasandra oahuensis 8643 649 SOTO3 Sophora tomentosa 8775 8775 TETRA1 Tetraplasandra spp. 8644 650 SPCA2 Spathodea campanulata 1 8645 8645 SPATH Spathodea spp. 8776 8818 TEWA Tetraplasandra waialealae 8646 651 SPSA7 Spiraeanthemum samoense 8777 8819 TEWA3 Tetraplasandra waimeae 8649 652 SPDU3 Spondias dulcis 8779 8823 TEBI Tetrazygia bicolor 8650 955 SPMO Spondias mombin 8784 675 THCA Theobroma cacao 8653 1860 SPOND Spondias spp. 8787 676 THPO3 Thespesia populnea 8655 957 STAM10 Stemonurus ammui 8788 8788 THESP Thespesia spp. 8656 956 SPPI4 Spondias pinnata 8789 8834 THPE3 Thevetia peruviana 8660 SOAM2 Soulamea amara 8804 8804 TIBOU Tibouchina spp. 8665 653 STFA5 Sterculia fanaiho 8805 8846 TIUR Tibouchina urvilleana 8667 958 STPA20 Sterculia palauensis 8806 723 TICO7 Timonius corymbosus 8669 654 STAN9 Streblus anthropophagorum 8807 724 TIMO4 Timonius mollis 8670 201 STPE3 Streblus pendulinus 8808 1890 TIMON Timonius spp. 8671 8671 STREB Streblus spp. 8809 726 TISU3 Timonius subauritus 8676 24 SUMA2 Suriana maritima 8810 727 TITI Timonius timon 8678 1870 SWIET Swietenia spp. 8811 8815 TOONA Toona spp. 8679 655 SWMA Swietenia macrophylla 8812 8851 TOCI Toona ciliata 8687 722 SYRA6 Symplocos racemosa 8822 8862 TOLA Touchardia latifolia 8689 8729 SYGL Syncarpia glomulifera 8823 8823 TOUCH Touchardia spp. 8690 8690 SYNCA Syncarpia spp. 8824 678 TOAR2 Tournefortia argentea 8691 656 SYDU Synsepalum dulcificum 8826 8826 TOURN Tournefortia spp. 8694 SYAQ Syzygium aqueum 8827 679 TRCA33 Trema cannabina 8695 658 SYBR3 Syzygium brevifolium 8831 204 TROR Trema orientalis 8832 1900 TREMA Trema spp.

8696 659 SYCA4 Syzygium carolinense Appendix B: 8697 660 SYCL Syzygium clusiifolium 8837 967 TRIK Trichospermum ikutai 8699 661 SYDE3 Syzygium dealatum 8838 968 TRLE8 Trichospermum ledermannii 8700 662 SYIN2 Syzygium inophylloides 8839 680 TRRI9 Trichospermum richii 8701 663 SYJA Syzygium jambos 8842 123 TRTR7 Triphasia trifolia 8702 25 SYMA2 Syzygium malaccense 8846 205 TROB7 Tristiropsis obtusangula 8703 664 SYRI3 Syzygium richii 8856 8897 URGL Urera glabra 8704 665 SYSA3 Syzygium samarangense 8857 8898 URKA Urera kaalae 8705 666 SYSA6 Syzygium samoense 8858 8858 URERA Urera spp. TREE SPECIES LIST 8706 8745 SYSA Syzygium sandwicense 8866 682 VEME3 Adonidia merrillii 8708 8708 SYZYG Syzygium spp. 8869 8909 VEMO3 Vernicia montana 8713 TAHE Tabebuia heterophylla 8870 8870 VERNI Vernicia spp. 8714 202 TAPA10 Tabebuia pallida 8872 969 VICO17 Vitex cofassus 8716 TARO Tabebuia rosea 8872 8911 VICO17 Vitex cofassus 8718 8488 TABEB Tabebuia spp. 8874 206 VIPA6 Vitex parviflora 8719 960 TAAU3 Tabernaemontana aurantiaca 8875 1910 VITEX Vitex spp. 8722 668 TAPA13 Tabernaemontana pandacaqui 8876 8914 VITR7 Vitex trifolia 8723 210 TARO3 Tabernaemontana rotensis 8884 683 WEBI Wedelia biflora pg.228 New NIMSOld NIMS NRCS Scientific 8886 684 WEAF Weinmannia affinis 8889 8928 WIBI Wikstroemia bicornuta 8890 8929 WIFU Wikstroemia furcata 8891 8930 WIMO Wikstroemia monticola 8892 8931 WIOA Wikstroemia oahuensis 8892 8893 WIOA Wikstroemia oahuensis 8895 8934 WIPH2 Wikstroemia phillyreifolia 8896 8935 WIPU Wikstroemia pulcherrima 8897 8936 WISA Wikstroemia sandwicensis 8898 8937 WISK Wikstroemia skottsbergiana 8899 8899 WIKST Wikstroemia spp. 8900 8938 WIVI Wikstroemia villosa 8901 207 XIAM Ximenia americana 8903 685 XYGR Xylocarpus granatum 8904 686 XYMO2 Xylocarpus moluccensis 8905 1920 XYLOC2 Xylocarpus spp. 8907 8947 XYCR Xylosma crenata 8908 8948 XYHA Xylosma hawaiiensis 8909 208 XYNE2 Xylosma nelsonii 8911 688 XYSA Xylosma samoensis 8915 8915 XYLOS Xylosma spp. 8925 8967 ZADI Zanthoxylum dipetalum 8929 8971 ZAHA Zanthoxylum hawaiiense 8930 8972 ZAKA Zanthoxylum kauaense 8933 8975 ZAOA Zanthoxylum oahuense 8936 8936 ZANTH Zanthoxylum spp. 8939 209 ZIMA Ziziphus mauritiana

REE SPECIES LIST BY NEW NIMS CODE

FSM T

:

Section B.3 pg.229 SECTION B.4 FSM TREE SPECIES Old NIMSNew NIMS NRCS Scientific LIST BY OLD NIMS CODE 135 6858 CYRA8 Cynometra ramiflora 136 6860 CYBE3 Cyphomandra betacea Old NIMSNew NIMS NRCS Scientific 137 6886 DELA13 Dendrocnide latifolia 10 6124 ANCH9 Annona cherimola 138 6891 DIAL13 Dictyosperma album 11 6756 COGU3 Couroupita guianensis 140 6907 DIKA2 Diospyros kaki 12 6771 CRLO3 Crotalaria longirostrata 141 6921 DIPO Discocalyx ponapensis 13 6966 DYLU Dypsis lutescens 142 6980 ELJO Elaeocarpus joga 15 7112 EUNE4 Euphorbia neriifolia 143 896 SYCU Syzygium cumini 16 7167 FIRU4 Ficus rubiginosa 144 7078 EUJA4 Eugenia javanica 18 7482 JAMI Jacaranda mimosifolia 145 7082 EUMA5 Eugenia malaccensis 19 7626 MATA3 Macaranga tanarius 146 7099 SYST3 Syzygium stelechanthum 20 8151 PHCA13 Phoenix canariensis 147 7102 EUTH4 Eugenia thompsonii 21 8288 POSC10 Polyscias scutellaria 149 7151 FICA Ficus carica 22 8415 PTMA8 Ptychosperma macarthuri 150 7155 FIEL Ficus elastica 23 8609 SIFA Sida fallax 151 7245 GLSE2 Gliricidia sepium 24 8676 SUMA2 Suriana maritima 152 7279 GUOF Guaiacum officinale 25 8702 SYMA2 Syzygium malaccense 153 7282 GUMA4 Guamia mariannae 49 6003 ACAU Acacia auriculiformis 154 7360 HELO12 Heritiera longipetiolata 50 858 CICA Cinnamomum camphora 155 7365 HEOV4 Hernandia ovigera 50 50 CUPRE Cupressus spp. 156 7366 HESO Hernandia sonora 60 341 AIAL Ailanthus altissima 157 7377 HEEL9 Heterospathe elata 61 512 EUCA2 Eucalyptus camaldulensis 158 7543 LALO Latania loddigesii 62 541 FRAM2 Fraxinus americana 159 7564 LEIN31 Leucaena insularum 63 856 CAGL11 Casuarina glauca 160 7588 LICH3 Livistona chinensis 64 887 PIPI3 Piscidia piscipula 161 7614 MAIN8 Macadamia integrifolia 65 896 SYCU Syzygium cumini 162 7627 MATH3 Macaranga thompsonii 100 6042 AGMA14 Aglaia mariannensis 163 7654 MAOD2 Mammea odorata 101 6048 AICO2 Aidia cochinchinensis 164 7658 MAOD Mangifera odorata 102 6059 ALLE Albizia lebbeck 165 7660 MAGL5 Manihot carthaginensis subsp. 103 6078 ALTR11 Aleurites trisperma Glaziovii 104 6107 ANOC Anacardium occidentale 166 7674 MAZA Manilkara zapota 105 6129 ANRE Annona reticulata 167 7710 MEMU10 Melanolepis multiglandulosa 106 6137 ANBU3 Antidesma bunius 168 7774 MEME12 Merrilliodendron megacarpum 107 6155 ARCO32 Araucaria columnaris 169 7798 MEAM4 Metroxylon amicarum 108 6157 ARHE12 Araucaria heterophylla 170 7835 MIEL4 Mimusops elengi 109 6169 ARPI6 Arenga pinnata 171 7855 MOOL Moringa oleifera 110 6175 ARMA28 Artocarpus mariannensis 172 681 MOAL Morus alba 111 6156 AREX4 Araucaria excelsa 173 7867 MUCA4 Muntingia calabura 112 6221 BARA5 Barringtonia racemosa 174 7899 MYRU3 Myrica rubra 113 6226 BAMO2 Bauhinia monandra 175 8060 PADU3 Pandanus dubius 114 6320 CASA28 Caesalpinia sappan 176 8064 PAFR7 Pandanus fragrans 115 6401 CAUR3 Caryota urens 178 8091 PAED4 Pangium edule 116 6418 CAJA3 Cassia javanica 179 8152 PHDA4 Phoenix dactylifera 117 6437 CALI8 Casuarina litorea 180 8154 PHSY3 Phoenix sylvestris 181 8157 PHAC3 Phyllanthus acidus

118 6439 CALO8 Catalpa longissima Appendix B: 119 6449 CEPE2 Ceiba pentandra 183 8178 PIRAG Pimenta racemosa 120 6459 CEDI12 Cerbera dilatata 184 8269 PLOBO Plumeria obtusa 121 6574 CIAU8 Citrus aurantium 185 8271 PLRU2 Plumeria rubra 122 6578 CIGR Citrus grandis 186 8295 POPI4 Pongamia pinnata 123 8842 TRTR7 Triphasia trifolia 187 8299 POCA23 Pouteria campechiana 124 6575 CILI5 Citrus limon 188 8303 PLOB5 Planchonella obovata 125 6580 CIMA10 Citrus macroptera 189 8305 POSA13 Pouteria sapota 126 6582 CIME3 Citrus medica 190 8307 PROB Premna obtusifolia TREE SPECIES LIST 127 6590 CLMA25 Claoxylon marianum 191 764 PRPE3 Prunus persica 128 6670 COUV Coccoloba uvifera 192 8390 PSYMAR Psychotria mariana 129 6684 COAR2 Coffea arabica 193 8399 PSRO2 Psychotria rotensis 130 6686 COLI8 Coffea liberica 194 8407 PTIN2 Pterocarpus indicus 131 6733 CODI18 Cordia dichotoma 195 8458 RHAP2 Rhizophora apiculata 132 6760 CRAL11 Crescentia alata 196 8462 RHMU Rhizophora mucronata 133 6786 CRJA3 Cryptomeria japonica 197 8490 ROEL Roystonea regia 134 6852 CYCI3 Cycas micronesica 198 888 SCAC2 Schefflera actinophylla 134 6852 CYCI3 Cycas circinalis 199 8603 SENE9 Serianthes nelsonii pg.230 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 200 8639 SOAL10 Sonneratia alba 430 6220 BAAS3 Barringtonia asiatica 201 8670 STPE3 Streblus pendulinus 431 6222 BASA9 Barringtonia samoensis 202 8714 TAPA10 Tabebuia pallida 432 6236 BIJA Bischofia javanica 203 897 TAIN2 Tamarindus indica 433 6250 BOVI7 Boehmeria virgata 204 8831 TROR Trema orientalis 434 6262 BRPA4 Broussonetia papyrifera 205 8846 TROB7 Tristiropsis obtusangula 435 6268 BRSE11 Bruguiera gymnorhiza 206 8874 VIPA6 Vitex parviflora 435 6268 BRSE11 Bruguiera sexangula 207 8901 XIAM Ximenia americana 436 6278 BUME4 Buchanania merrillii 208 8909 XYNE2 Xylosma nelsonii 437 6299 BURI3 Burckella richii 209 8939 ZIMA Ziziphus mauritiana 439 6342 CANE31 Calophyllum neo-ebudicum 210 8723 TARO3 Tabernaemontana rotensis 440 6341 CAIN4 Calophyllum inophyllum 212 6579 CIHY2 Citrus hystrix 441 6370 CAOD Cananga odorata 213 511 EUGL Eucalyptus globulus 443 6372 CAHA39 Canarium mafoa 214 7088 EUPA28 Eugenia palumbis 444 6375 CAOV7 Canarium ovatum 215 7179 FIVI3 Ficus virens 446 6378 CAVI26 Canarium vitiense 216 7186 FLRU2 Flacourtia rukam 447 6381 CAME35 Psydrax merrillii 224 8563 SCTE Schinus terebinthifolius 448 6395 CAPA23 Carica papaya 278 6004 ACCO Acacia confusa 450 6415 CAFI3 Cassia fistula 281 6006 ACKO Acacia koa 451 6430 CAEL5 Castilla elastica 293 6171 ARAL7 Artocarpus altilis 452 6434 CAEQ Casuarina equisetifolia 294 6173 ARHE2 Artocarpus heterophyllus 454 6461 CEMA20 Cerbera manghas 295 6176 ARNO Artocarpus nobilis 456 6525 CHVI22 Chionanthus vitiensis 299 299 2TE Tree conifer 457 6541 CHCA10 Chrysophyllum cainito 303 303 ACFA Acacia farnesiana 458 6564 CIVE2 Cinnamomum verum 329 6998 ERJA3 Eriobotrya japonica 460 6570 CISA2 Citronella samoensis 339 7034 EUDE2 Eucalyptus deglupta 461 6572 CIAU Citrus aurantifolia 340 7047 EUPI Eucalyptus pilularis 462 6581 CIMA5 Citrus maxima 341 514 EURO2 Eucalyptus robusta 463 6584 CIRE3 Citrus reticulata 342 7053 EUSA Eucalyptus saligna 464 6577 CISI3 Citrus sinensis 343 7054 EUSI2 Eucalyptus sideroxylon 466 908 CONU Cocos nucifera 352 7160 FIMI2 Ficus microcarpa 468 6703 COBA17 Commersonia bartramia 358 7273 GRRO Grevillea robusta 471 6729 COAS6 Cordia aspera 361 7381 HEBR8 Hevea brasiliensis 472 6742 COSU2 Cordia subcordata 382 8121 PEPT3 Peltophorum pterocarpum 473 6758 CRRE12 Crateva religiosa 385 8220 PIDU Pithecellobium dulce 474 6769 CRBI9 Crossostylis biflora 386 6838 CYDE16 Cyathea decurrens 475 6779 CREL8 Cryptocarya elegans 387 6841 CYME12 Cyathea medullaris 478 6784 CRTU4 Cryptocarya turbinata 400 6028 ADPA Adenanthera pavonina 481 6847 CYATH Cyathea spp. 403 6046 AGSA9 Aglaia samoensis 482 6849 CYTR11 Cyathea truncata 405 6057 ALCH2 Albizia chinensis 483 6855 CYBA7 Cyclophyllum barbatum 406 6072 ALSA12 Elattostachys falcata 485 6883 DERE Delonix regia 407 6075 ALMO2 Aleurites moluccana 486 6885 DEHA5 Dendrocnide harveyi 408 6085 ALTI2 Allophylus timorensis 487 6902 DIDI9 Diospyros discolor 409 6091 ALZI Alphitonia zizyphoides 488 6903 DIEB2 Diospyros ebenum 410 6096 ALPA22 Alstonia pacifica 489 6904 DIEL3 Diospyros elliptica 411 6109 ANIN13 Anacolosa insularis 491 6910 DISA16 Diospyros samoensis 412 6128 ANMU2 Annona muricata 493 6943 DRVI5 Drypetes vitiensis 413 6131 ANSQ Annona squamosa 494 6965 DUZI Durio zibethinus 415 6144 ANSP14 Antidesma sphaerocarpum 496 6968 DYHU2 Dysoxylum huntii 416 6148 ANIN2 Antirhea inconspicua 497 6969 DYMA Dysoxylum maota 417 6167 ARCA41 Areca catechu 498 6970 DYSA Dysoxylum samoense 419 6177 AROD2 Artocarpus odoratissimus 501 6977 ELFL6 Elaeocarpus floridanus 420 6179 ARBR11 Arytera brackenridgei 502 6978 ELGR Elaeocarpus graeffei

REE SPECIES LIST BY OLD NIMS CODE 421 6181 ASDI14 Ascarina diffusa 503 6979 ELGR6 Elaeocarpus grandis 422 6185 ASNA10 Astronidium navigatorum 504 6985 ELUL Elaeocarpus ulianus 423 6187 ASPI11 Astronidium pickeringii 505 6990 ELFA3 Elattostachys falcata

FSM T

: 424 6188 ASSA23 Astronidium samoense 506 6992 ELDU3 Eleocharis dulcis 425 6190 ASSU31 Astronidium subcordata 507 6994 ENEL Endiandra elaeocarpa 426 6193 ATRA2 Atuna racemosa 508 7008 ERFU2 Erythrina fusca 427 6197 AVBI Averrhoa bilimbi 509 7014 ERSU15 Erythrina subumbrans 428 6198 AVCA Averrhoa carambola 510 7016 ERVAO Erythrina variegata 429 6208 BATA Baccaurea taitensis

Section B.4 pg.231 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 511 7017 ERAC10 Erythrospermum 591 7942 NEOP Ochrosia oppositifolia acuminatissimum 591 7942 NEOP Neisosperma oppositifolia 512 7091 EURE7 Eugenia reinwardtiana 592 7948 NEFO2 Neonauclea forsteri 513 7104 EUUN2 Eugenia uniflora 593 7952 NELA7 Nephelium lappaceum 514 7117 EULO7 Euphoria longana 595 8008 HOAC4 Homalanthus acuminatus 515 7129 EXAG Excoecaria agallocha 596 8009 HONU3 Homalanthus nutans 516 7141 FABE Fagraea berteroana 597 8044 PAST24 Palaquium stehlinii 517 7156 FIGO Ficus godeffroyi 598 8082 PARE19 Pandanus reineckei 518 7163 FIOB3 Ficus obliqua 601 8103 PAIN20 Parinari insularum 519 7165 FIPR2 Ficus prolixa 602 8123 PEAC6 Pemphis acidula 520 7169 FISC3 Ficus scabra 603 7211 PEAM3 Persea americana 521 7176 FITI2 Ficus tinctoria 605 8206 PIAR8 Pipturus argenteus 522 7178 FIUN Ficus uniauriculata 606 8213 PIGR6 Pisonia grandis 524 7191 FLFL4 Flueggea flexuosa 607 8217 PIUM2 Pisonia umbellifera 525 7210 FUEL Funtumia elastica 610 8242 PLGA2 Planchonella garberi 526 7214 GAMA10 Garcinia mangostana 611 8243 PLGR11 Planchonella grayana 527 7216 GAMY Garcinia myrtifolia 612 8244 PLLI6 Planchonella linggensis 530 7229 GAFL8 Garuga floribunda 614 8246 PLSA9 Planchonella samoensis 531 7233 GERU3 Geniostoma rupestre 615 8248 PLTO2 Planchonella torricellensis 532 7241 GICE2 Gironniera celtidifolia 619 8287 POSA27 Polyscias samoensis 533 7247 GLCU Glochidion cuspidatum 620 8290 POPI12 Pometia pinnata 535 7275 GRCR4 Grewia crenata 621 8297 POCA43 Pouteria caimito 536 7307 GUSP3 Guettarda speciosa 622 8309 PRSE6 Premna serratifolia 538 7311 GURH Guioa rhoifolia 623 8329 PRPA11 Pritchardia pacifica 539 7319 GYAM2 Gyrocarpus americanus 624 8356 PSGU Psidium guajava 540 7332 HAFL Haplolobus floribundus 626 8387 PSIN10 Psychotria insularum 541 7334 HAAR4 Harpullia arborea 627 8402 PSOD Psydrax odorata 542 7338 HEDE14 Hedycarya denticulata 628 8430 RAMY Rapanea myricifolia 544 7359 HELI9 Heritiera littoralis 629 8440 RELA Reynoldsia lanutoensis 546 7363 HEMO13 Hernandia moerenhoutiana 631 8456 RHED4 Rheedia edulis 547 7364 HENY Hernandia nymphaeifolia 632 989 RHMA2 Rhizophora mangle 548 7412 HITI Hibiscus tiliaceus 633 8464 RHST8 Rhizophora stylosa 549 7424 HOWH Homalium whitmeeanum 634 8469 RHTA Rhus taitensis 550 7475 INFA3 Inocarpus fagifer 635 8480 RODE5 Rollinia deliciosa 551 7477 INBI Intsia bijuga 636 8505 SASA10 Albizia saman 554 7533 LASP Lagerstroemia speciosa 637 8515 SAKO4 Sandoricum koetjape 555 7539 LADO2 Lansium domesticum 639 8532 SAVI17 Sapindus vitiensis 556 7565 LELE10 Leucaena leucocephala 640 8544 SAPA35 Sarcopygme pacifica 558 7583 LICH4 Litchi chinensis 641 8560 SCTA Scaevola taccada 560 7586 LISA8 Litsea samoensis 642 8559 SCSA10 Schefflera samoensis 561 7598 LUNE4 Lucuma nervosa 644 8583 SEFL9 Securinega flexuosa 562 7602 LULI8 Lumnitzera littorea 647 8605 SEGR5 Sesbania grandiflora 563 7617 MATE16 Macadamia tetraphylla 648 8628 SOAM Solanum americanum 564 7619 MAGR Macaranga grayana 649 8643 SOTO3 Sophora tomentosa 565 7620 MAHA9 Macaranga harveyana

650 8644 SPCA2 Spathodea campanulata Appendix B: 568 7625 MAST7 Macaranga stipulosa 651 8646 SPSA7 Spiraeanthemum samoense 569 885 MAIN3 Mangifera indica 652 8649 SPDU3 Spondias dulcis 570 7653 MAGL12 Mammea glauca 653 8665 STFA5 Sterculia fanaiho 571 7664 MADI14 Manilkara dissecta 654 8669 STAN9 Streblus anthropophagorum 575 7705 MESA11 Medusanthera samoensis 655 8679 SWMA Swietenia macrophylla 577 7750 MERE8 Melicope latifolia 656 8691 SYDU Synsepalum dulcificum 578 7759 MESA9 Melicytus samoensis 658 8695 SYBR3 Syzygium brevifolium 580 7766 MEAR16 Melochia aristata 659 8696 SYCA4 Syzygium carolinense TREE SPECIES LIST 581 7776 MEMA16 Meryta macrophylla 660 8697 SYCL Syzygium clusiifolium 582 7781 MEPOP2 Metrosideros collina 661 8699 SYDE3 Syzygium dealatum 583 7801 MICH4 Michelia champaca 662 8700 SYIN2 Syzygium inophylloides 584 7824 MIMI23 Micromelum minutum 663 8701 SYJA Syzygium jambos 585 7831 MIPI9 Millettia pinnata 664 8703 SYRI3 Syzygium richii 586 7849 MOCI3 Morinda citrifolia 665 8704 SYSA3 Syzygium samarangense 588 7881 MURA5 Mussaenda raiateensis 666 8705 SYSA6 Syzygium samoense 589 7906 MYIN4 Myristica inutilis 668 8722 TAPA13 Tabernaemontana pandacaqui 590 7902 MYHY2 Myristica hypargyraea 669 8737 TASA2 Tarenna sambucina pg.232 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 670 8750 TECA Terminalia catappa 822 6460 CEFL2 Cerbera floribunda 673 8758 TERI3 Terminalia richii 823 6557 CICA2 Cinnamomum carolinense 674 8759 TESA2 Terminalia samoensis 824 6561 CIPE6 Cinnamomum pedatinervium 675 8784 THCA Theobroma cacao 825 6562 CISE2 Cinnamomum sessilifolium 676 8787 THPO3 Thespesia populnea 826 6583 CIMI3 Citrus mitis 678 8824 TOAR2 Tournefortia argentea 827 6586 CLCA15 Claoxylon carolinianum 679 8827 TRCA33 Trema cannabina 828 6588 CLFA6 Claoxylon fallax 680 8839 TRRI9 Trichospermum richii 829 6589 CLLO5 Claoxylon longiracemosum 682 8866 VEME3 Adonidia merrillii 830 6593 CLCA18 Cleistanthus carolinianus 683 8884 WEBI Wedelia biflora 831 6594 CLIN8 Cleistanthus insularis 684 8886 WEAF Weinmannia affinis 832 6691 COSC13 Colona scabra 685 8903 XYGR Xylocarpus granatum 833 6702 COTE15 Combretum tetralophum 686 8904 XYMO2 Xylocarpus moluccensis 834 6736 COMI6 Cordia micronesica 688 8911 XYSA Xylosma samoensis 835 865 COSE2 Cordia sebestena 691 6840 CYLU5 Cyathea lunulata 836 6842 CYNI7 Cyathea nigricans 692 8085 PATE2 Pandanus tectorius 837 6844 CYPO11 Cyathea ponapeana 695 6203 AVMA3 Avicennia marina 838 6853 CYRE11 Cycas revoluta 701 8283 POGR28 Polyscias grandifolia 839 6905 DIFE5 Diospyros ferrea 702 7248 GLMA9 Glochidion marianum 840 6928 DOSP3 Dolichandrone spathacea 703 7506 KLHO Kleinhovia hospita 842 6941 DRNI3 Drypetes nitida 705 6984 ELTO4 Elaeocarpus tonganus 843 6973 ELGU Elaeis guineensis 706 7249 GLRA4 Glochidion ramiflorum 844 6976 ELCA20 Elaeocarpus carolinensis 707 6200 AVAL Avicennia marina subsp. Marina 845 6981 ELKE Elaeocarpus kerstingianus 707 6200 AVAL Avicennia alba 846 6982 ELKU Elaeocarpus kusanoi 708 6472 CETA2 Ceriops tagal 848 7059 EUAQ Eugenia aquea 709 8129 PEMO13 Pericopsis mooniana 849 7065 EUCA16 Eugenia caryophyllus 712 6927 DOVI Dodonaea viscosa 850 7086 EUNI2 Eugenia nitida 713 6933 DRMU2 Dracaena multiflora 851 7087 EUPA3 Eugenia palauensis 715 715 MAPA28 Maytenus palauica 852 7101 EUSU9 Eugenia suzukii 716 8022 OSOL Osmoxylon oliveri 854 7123 EUHO5 Euodia hortensis 717 8023 OSPA Osmoxylon pachyphyllum 855 7124 EUNI8 Euodia nitida 718 718 OSTR Osmoxylon truncatum 856 7125 EUPA29 Euodia palawensis 720 8460 RHLA12 Rhizophora lamarckii 857 7126 EUPO15 Euodia ponapensis 722 8687 SYRA6 Symplocos racemosa 858 7128 EUTR13 Euodia trichantha 723 8806 TICO7 Timonius corymbosus 859 7133 EXPO2 Exorrhiza ponapensis 724 8807 TIMO4 Timonius mollis 860 7142 FAKS Fagraea ksid 726 8809 TISU3 Timonius subauritus 861 7168 FISA Ficus saffordii 727 8810 TITI Timonius timon 863 7180 FICH Finschia chloroxantha 800 6043 AGPA19 Aglaia palauensis 864 7215 GAMA8 Garcinia matsudai 800 800 QUERC Quercus spp. 865 7217 GAPO4 Garcinia ponapensis 801 6044 AGPO4 Aglaia ponapensis 866 7219 GARU3 Garcinia rumiyo 802 6058 ALFA5 Albizia falcataria 867 7252 GMPA Gmelina palawensis 803 6061 ALRE Albizia retusa 868 7254 GNGN Gnetum gnemon 804 6084 ALTE13 Allophylus ternatus 869 7251 GMEL Gmelina elliptica 805 6088 ALCA21 Alphitonia carolinensis 870 7260 GOCA2 Goniothalamus carolinensis 806 6118 ANEV Angiopteris evecta 871 7313 GUPA Gulubia palauensis 807 6186 ASPA37 Astronidium palauense 872 7427 HOAM2 Horsfieldia amklaal 808 6213 BAPA8 Badusa palauensis 873 7428 HONO2 Horsfieldia novoguineensis 809 6225 BABI6 Bauhinia binata 874 7430 HOPA10 Horsfieldia palauensis 810 6277 BUEN Buchanania engleriana 875 7497 KAPA4 Kayea pacifica 811 6279 BUPA16 Buchanania palawensis 876 7618 MACA25 Macaranga carolinensis 812 6343 CAPE15 Calophyllum pelewense 877 7638 MAPA6 Mallotus palauensis 813 6344 CASO12 Calophyllum soulattri 878 7642 MATI4 Mallotus tiliifolius

REE SPECIES LIST BY OLD NIMS CODE 814 6367 CABR42 Campnosperma brevipetiolata 879 7657 MAMI3 Mangifera minor 814 6366 CABR18 Campnosperma brevipetiolatum 880 7666 MAHO5 Manilkara hoshinoi 815 6373 CAHI14 Canarium hirsutum 882 7672 MAUD Manilkara udoido

FSM T

: 816 6374 CAIN42 Canarium indicum 883 7680 MAFR11 Marattia fraxinea 817 6399 CAMI36 Caryota mitis 884 7704 MECA21 Medusanthera carolinensis 818 6405 CACA28 Casearia cauliflora 885 992 MEQU Melaleuca quinquenervia 819 6417 CAGR11 Cassia grandis 886 7777 MESE11 Meryta senfftiana 820 6420 CASI4 Cassia siamea 887 7799 MESA7 Metroxylon sagu 821 6452 CEPA6 Celtis paniculata 888 7850 MOLA12 Morinda latibractea

Section B.4 pg.233 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 889 7851 MOPE2 Morinda pedunculata 953 8586 SEVE4 Semecarpus venenosa 890 7873 MUCO8 Musa coccinea 954 8601 SEKA2 Serianthes kanehirae 891 7874 MUNA Musa nana 955 8650 SPMO Spondias mombin 892 7875 MUSA Musa sapientum 956 8656 SPPI4 Spondias pinnata 893 7877 MUTE6 Musa textilis 957 8655 STAM10 Stemonurus ammui 894 7878 MUTI Musa tikap 958 8667 STPA20 Sterculia palauensis 895 7879 MUTR2 Musa troglodytarum 959 940 SWMA2 Swietenia mahagoni 896 7880 MUFR3 Mussaenda frondosa 960 8719 TAAU3 Tabernaemontana aurantiaca 897 7903 MYIN3 Myristica insularis 961 8743 TEST Tecoma stans 898 7962 NECE Neuburgia celebica 962 8744 TEGR Tectona grandis 899 7974 NYFR2 Nypa fruticans 963 8749 TECA16 Terminalia carolinensis 900 7980 OCPY Ochroma pyramidale 964 8751 TECR3 Terminalia crassipes 901 8019 ORCA12 Ormosia calavensis 965 8752 TEED Terminalia edulis 902 8036 PAAQ2 Pachira aquatica 966 8755 TEKA4 Terminalia kaernbachii 903 8054 PAAI Pandanus aimiriikensis 967 8837 TRIK Trichospermum ikutai 905 8055 PACO51 Pandanus cominsii 968 8838 TRLE8 Trichospermum ledermannii 906 8056 PACO3 Pandanus compressus 969 8872 VICO17 Vitex cofassus 907 8057 PACY10 Pandanus cylindricus 970 7429 HONU2 Horsfieldia nunu 908 8058 PADI2 Pandanus dilatatus 971 8398 PSRH2 Psychotria rhombocarpa 909 8059 PADI29 Pandanus divergens 972 6138 ANKU3 Antidesma kusaiense 910 8061 PADU4 Pandanus duriocarpus 973 8412 PTLE3 Ptychococcus ledermannianus 911 8062 PAEN Pandanus enchabiensis 987 987 COER2 Conocarpus erectus 912 8063 PAFI Pandanus fischerianus 993 993 MEAZ Melia azedarach 913 8065 PAHO6 Pandanus hosinoi 998 998 2TB Tree hardwood 914 8066 PAJA3 Pandanus jaluitensis 999 999 2TREE Tree unknown 915 8067 PAKA2 Pandanus kanehirae 1010 6063 ALBIZ Albizia spp. 916 8068 PAKO2 Pandanus korrensis 1020 6047 AGLAI Aglaia spp. 917 8069 PALA3 Pandanus lakatwa 1030 6077 ALEUR Aleurites spp. 918 8070 PALA4 Pandanus laticanaliculatus 1040 6083 ALLOP Allophylus spp. 919 8071 PAMA3 Pandanus macrocephalus 1050 6090 ALPHI Alphitonia spp. 920 8072 PAMA32 Pandanus macrojeanneretia 1060 6130 ANNON Annona spp. 921 8073 PAME18 Pandanus menne 1070 6145 ANTID Antidesma spp. 922 8092 PAOB7 Pandanus obliquus 1080 6158 ARAUC2 Araucaria spp. 923 8075 PAOD2 Pandanus odontoides 1090 6178 ARTOC Artocarpus spp. 924 8076 PAPA38 Pandanus palawensis 1100 6189 ASTRO4 Astronidium spp. 925 8077 PAPA39 Pandanus patina 1110 6199 AVERR Averrhoa spp. 926 8078 PAPE Pandanus peliliuensis 1120 6205 AVICE Avicennia spp. 927 8079 PAPO2 Pandanus ponapensis 1130 6223 BARRI Barringtonia spp. 928 8080 PAPU18 Pandanus pulposus 1140 6230 BAUHI Bauhinia spp. 929 8081 PARE2 Pandanus rectangulatus 1150 6280 BUCHA Buchanania spp. 930 8083 PARO2 Pandanus rotundatus 1160 6345 CALOP Calophyllum spp. 931 8086 PATO6 Pandanus tolotomensis 1170 6377 CANAR2 Canarium spp. 932 8087 PATR Pandanus trukensis 1180 6400 CARYO Caryota spp. 933 8088 PAUT Pandanus utilis 1190 6408 CASEA Casearia spp.

934 8090 PAVA4 Pandanus variegatus 1200 6422 CASSI Cassia spp. Appendix B: 935 7679 MACO Maranthes corymbosa 1210 855 CASUA Casuarina spp. 936 8104 PALA5 Parinari laurina 1220 460 CELTI Celtis spp. 937 8108 PAPA2 Parkia parvifoliola 1240 6563 CINNA2 Cinnamomum spp. 938 8181 PIIN5 Pinanga insignis 1250 860 CITRU2 Citrus spp. 939 8286 PONO10 Polyscias nodosa 1260 6592 CLAOX Claoxylon spp. 940 8292 POHO Ponapea hosinoi 1270 6595 CLEIS5 Cleistanthus spp. 941 8293 POLE21 Ponapea ledermanniana 1280 6687 COFFE Coffea spp. 942 8298 POCA6 Pouteria calcarea 1290 6724 COPRO Coprosma spp. TREE SPECIES LIST 943 8308 PRPU5 Premna pubescens 1300 6741 CORDI Cordia spp. 945 8416 PTPA Ptychosperma palauense 1310 6783 CRYPT2 Cryptocarya spp. 946 8432 RAIN8 Rauvolfia insularis 1320 6847 CYATH Cyathea spp. 947 8436 RAMA7 Ravenala madagascariensis 1330 6854 CYCAS Cycas spp. 948 8474 RICA16 Rinorea carolinensis 1340 6887 DENDR1 Dendrocnide spp. 949 8491 ROOL Roystonea oleracea 6 950 8503 SAIN13 Samadera indica 1350 520 DIOSP Diospyros spp. 951 8534 SAIN2 Sapium indicum 1360 6942 DRYPE Drypetes spp. 952 8577 SCHY5 Scyphiphora hydrophyllacea 1370 6971 DYSOX Dysoxylum spp. pg.234 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 1380 6983 ELAEO Elaeocarpus spp. 6051 6051 AILAN Ailanthus spp. 1390 7013 ERYTH Erythrina spp. 6059 6062 ALSA10 Albizia saponaria 1410 7096 EUGEN Eugenia spp. 6067 6069 ALMA Alectryon macrococcus 1420 7127 EUODI Euodia spp. 6070 6069 ALMA Alectryon macrococcus 1430 7143 FAGRA Fagraea spp. 6071 6069 ALMA Alectryon macrococcus 1440 7171 FICUS Ficus spp. 6072 6990 ELFA3 Elattostachys falcata 1450 7221 GARCI Garcinia spp. 6073 6073 ALECT Alectryon spp. 1460 7250 GLOCH Glochidion spp. 6076 6075 ALMO2 Aleurites moluccana 1470 7253 GMELI Gmelina spp. 6084 6084 ALTE13 Allophylus triphyllus 1480 7312 GUIOA Guioa spp. 6086 6086 ALNE2 Alnus nepalensis 1490 7340 HEDYC2 Hedycarya spp. 6087 350 ALNUS Alnus spp. 1500 7362 HERIT2 Heritiera spp. 6089 6089 ALPO3 Alphitonia ponderosa 1510 7367 HERNA Hernandia spp. 6094 6095 ALMA16 Alstonia macrophylla 1520 7431 HORSF2 Horsfieldia spp. 6097 6097 ALSTO Alstonia spp. 1530 7566 LEUCA Leucaena spp. 6135 6135 ANKA Antidesma kapuae 1540 7587 LITSE Litsea spp. 6136 6139 ANPL2 Antidesma platyphyllum 1550 7616 MACAD Macadamia spp. 6139 6142 ANPO8 Antidesma ponapense 1560 7623 MACAR Macaranga spp. 6140 6143 ANPU2 Antidesma pulvinatum 1570 7641 MALLO Mallotus spp. 6140 6139 ANPL2 Antidesma platyphyllum 1580 7655 MAMME Mammea spp. 6141 6139 ANPL2 Antidesma platyphyllum 1590 7659 MANGI Mangifera spp. 6154 6154 ARAN15 Araucaria angustifolia 1600 7671 MANIL Manilkara spp. 6159 6159 ARAL Archontophoenix alexandrae 1610 7706 MEDUS2 Medusanthera spp. 6161 6161 AREL4 Ardisia elliptica 1620 7778 MERYT Meryta spp. 6166 6166 ARDIS Ardisia spp. 1630 7800 METRO2 Metroxylon spp. 6204 6203 AVMA3 Avicennia marina 1640 7852 MORIN Morinda spp. 6215 6215 BAMBU Bambusa spp. 1650 7876 MUSA2 Musa spp. 6216 6216 BAVU2 Bambusa vulgaris 1660 7882 MUSSA Mussaenda spp. 6237 6237 BISCH Bischofia spp. 1670 7904 MYRIS Myristica spp. 6238 6238 BIOR Bixa orellana 1680 8010 HOMAL6 Homalanthus spp. 6239 6239 BIXA Bixa spp. 1690 8024 OSMOX Osmoxylon spp. 6242 6242 BOBR3 Bobea brevipes 1700 8084 PANDA Pandanus spp. 6243 6243 BOEL3 Bobea elatior 1710 8105 PARIN Parinari spp. 6244 6244 BOSA2 Bobea sandwicensis 1720 8153 PHOEN2 Phoenix spp. 6245 6245 BOBEA Bobea spp. 1730 8180 PIMEN Pimenta spp. 6245 6246 BOTI Bobea timonioides 1740 8215 PISON Pisonia spp. 6248 6247 BOFR2 Bocconia frutescens 1750 8238 PITTO Pittosporum spp. 6248 6248 BOCCO Bocconia spp. 1760 8247 PLANC Planchonella spp. 6260 6260 BRAR6 Broussaisia arguta 1770 8272 PLUME Plumeria spp. 6264 6264 BRCA12 Brugmansia candida 1780 8289 POLYS4 Polyscias spp. 6267 6267 BRPA15 Bruguiera parviflora 1790 8294 PONAP Ponapea spp. 6269 6269 BRUGU Bruguiera spp. 1800 8306 POUTE Pouteria spp. 6287 6286 BUAS Buddleja asiatica 1810 8310 PREMN Premna spp. 6318 6318 CAKA5 Caesalpinia kavaiensis 1820 8400 PSYCH Psychotria spp. 6345 6346 CAPR Calotropis procera 1830 8418 PTYCH4 Ptychosperma spp. 6347 6347 CALOT Calotropis spp. 1840 8443 REYNO Reynoldsia spp. 6396 6396 CARIC Carica spp. 1850 8463 RHIZO Rhizophora spp. 6397 6397 CARE22 Carmona retusa 1860 8653 SPOND Spondias spp. 6398 6398 CARMO Carmona spp. 1870 8678 SWIET Swietenia spp. 6420 8596 SESI3 Senna siamea 1880 8748 TERMI Terminalia spp. 6433 6433 CACU8 Casuarina cunninghamiana 1890 8808 TIMON Timonius spp. 6441 6441 CEOB Cecropia obtusifolia 1900 8832 TREMA Trema spp. 6444 6444 CECRO Cecropia spp. 1910 8875 VITEX Vitex spp. 6445 6445 CEOD Cedrela odorata

REE SPECIES LIST BY OLD NIMS CODE 1920 8905 XYLOC2 Xylocarpus spp. 6463 6463 CERBE Cerbera spp. 6002 6002 ACAN10 Acacia aneura 6469 6469 CEHI3 Cereus hildmannianus 6007 6007 ACKO2 Acacia koaia 6470 6470 CEREU Cereus spp.

FSM T

: 6009 6010 ACME80 Acacia mearnsii 6473 6473 CEAU2 Cestrum aurantiacum 6009 6009 ACMA12 Acacia mangium 6474 6474 CEDI6 Cestrum diurnum 6010 6011 ACME Acacia melanoxylon 6477 6477 CENO Cestrum nocturnum 6013 6014 ACPA81 Acacia parramattensis 6478 6478 CESTR Cestrum spp. 6016 300 ACACI Acacia spp. 6482 6482 CHAT2 Chamaesyce atrococca 6029 6029 ADENA Adenanthera spp. 6483 6483 CHCE Chamaesyce celastroides

Section B.4 pg.235 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 6484 6483 CHCE Chamaesyce celastroides 6628 6628 CLERM Clermontia spp. 6485 6483 CHCE Chamaesyce celastroides 6630 6625 CLPE3 Clermontia persicifolia 6486 6483 CHCE Chamaesyce celastroides 6631 6626 CLPY2 Clermontia pyrularia 6487 6483 CHCE Chamaesyce celastroides 6632 6627 CLSI3 Clermontia singuliflora 6488 6483 CHCE Chamaesyce celastroides 6633 6629 CLTU2 Clermontia tuberculata 6489 6483 CHCE Chamaesyce celastroides 6634 6630 CLWA2 Clermontia waimeae 6490 6483 CHCE Chamaesyce celastroides 6636 6636 CLERO2 Clerodendrum spp. 6491 6483 CHCE Chamaesyce celastroides 6641 6632 CLCH4 Clerodendrum chinense 6492 6492 CHHE3 Chamaesyce herbstii 6642 6633 CLGL2 Clerodendrum glabrum 6493 6493 CHKU Chamaesyce kuwaleana 6643 6634 CLIN Clerodendrum indicum 6494 6494 CHOL3 Chamaesyce olowaluana 6644 6635 CLMA24 Clerodendrum macrostegium 6495 6495 CHRO2 Chamaesyce rockii 6652 6652 CLUSI Clusia spp. 6496 6496 CHAMA1 Chamaesyce spp. 6660 6651 CLRO Clusia rosea 5 6681 6681 COCOS Cocos spp. 6499 6497 CHDE3 Charpentiera densiflora 6699 6699 COLUB Colubrina spp. 6500 6498 CHEL Charpentiera elliptica 6702 6694 COAS3 Colubrina asiatica 6501 6499 CHOB2 Charpentiera obovata 6704 6697 COOP Colubrina oppositifolia 6501 6500 CHOV2 Charpentiera ovata 6709 6709 CONOC Conocarpus spp. 6502 6500 CHOV2 Charpentiera ovata 6716 6716 COFO2 Coprosma foliosa 6503 6503 CHARP Charpentiera spp. 6723 6717 COKA Coprosma kauensis 6505 6504 CHTO3 Charpentiera tomentosa 6724 6718 COLO4 Coprosma longifolia 6506 6504 CHTO3 Charpentiera tomentosa 6725 6719 COMO3 Coprosma montana 6508 6508 CHFA Cheirodendron fauriei 6726 6720 COOC3 Coprosma ochracea 6509 6509 CHFO4 Cheirodendron forbesii 6727 6721 COPU8 Coprosma pubens 6510 6507 CHDO3 Cheirodendron dominii 6728 6722 CORH Coprosma rhynchocarpa 6510 6510 CHPL Cheirodendron platyphyllum 6731 6726 COWA4 Coprosma waimeae 6512 6510 CHPL Cheirodendron platyphyllum 6738 6731 COCO5 Cordia collococca 6513 6513 CHEIR Cheirodendron spp. 6745 6745 CORDY2 Cordyline spp. 6514 6514 CHTR2 Cheirodendron trigynum 6752 6744 COFR2 Cordyline fruticosa 6515 6514 CHTR2 Cheirodendron trigynum 6755 6755 CORYN2 Corynocarpus spp. 6516 6514 CHTR2 Cheirodendron trigynum 6757 6749 COCA48 Corymbia calophylla 6518 6518 CHENO Chenopodium spp. 6758 6750 COCI4 Corymbia citriodora 6521 6517 CHOA Chenopodium oahuense 6759 6751 COFI7 Corymbia ficifolia 6545 6542 CHOL Chrysophyllum oliviforme 6760 6752 COGU4 Corymbia gummifera 6545 6545 CIHE7 Cibotium heleniae 6763 6754 COLA6 Corynocarpus laevigatus 6549 6549 CIBOT Cibotium spp. 6786 6778 CROR5 Cryptocarya oreophila 6550 6546 CICH Cibotium chamissoi 6787 6787 CRYPT4 Cryptomeria spp. 6551 6547 CIGL Cibotium glaucum 6790 6781 CRMA8 Cryptocarya mannii 6552 6548 CIME8 Cibotium menziesii 6795 6795 CULU2 Cupressus lusitanica 6553 6553 CINCH Cinchona spp. 6796 6796 CUSE2 Cupressus sempervirens 6557 6552 CIPU Cinchona pubescens 6809 6800 CYAC4 Cyanea aculeatiflora 6559 6555 CIBU2 Cinnamomum burmannii 6810 6801 CYAR10 Cyanea arborea 6568 6568 CITHA Citharexylum spp. 6811 6802 CYFI6 Cyanea fissa 6569 6565 CICA8 Citharexylum caudatum 6814 6805 CYFL4 Cyanea floribunda 6570 6567 CISP3 Citharexylum spinosum

6815 6806 CYGI5 Cyanea giffardii Appendix B: 6595 6591 CLSA Claoxylon sandwicense 6816 6807 CYHA6 Cyanea hamatiflora 6596 6596 CLLE3 Clermontia leptoclada 6819 6810 CYHA7 Cyanea hardyi 6602 6597 CLAR4 Clermontia arborescens 6820 6811 CYHO6 Cyanea horrida 6606 6601 CLCL Clermontia clermontioides 6821 6812 CYKU3 Cyanea kuhihewa 6609 6604 CLDR2 Clermontia drepanomorpha 6822 6813 CYKU Cyanea kunthiana 6610 6605 CLFA Clermontia fauriei 6823 6814 CYLE5 Cyanea leptostegia 6611 6606 CLGR3 Clermontia grandiflora 6824 6815 CYMA10 Cyanea macrostegia 6615 6610 CLHA4 Clermontia hawaiiensis 6827 6818 CYMA14 Cyanea marksii TREE SPECIES LIST 6616 6611 CLKA Clermontia kakeana 6828 6819 CYPI4 Cyanea pilosa 6617 6612 CLKO Clermontia kohalae 6828 6828 CYANE Cyanea spp. 6618 6613 CLLI3 Clermontia lindseyana 6831 6822 CYPO5 Cyanea pohaku 6619 6614 CLMI3 Clermontia micrantha 6832 6823 CYPR8 Cyanea procera 6620 6615 CLMO5 Clermontia montis-loa 6833 6824 CYPY Cyanea pycnocarpa 6621 6616 CLOB2 Clermontia oblongifolia 6834 6825 CYQU Cyanea quercifolia 6625 6620 CLPA6 Clermontia pallida 6835 6826 CYRI4 Cyanea rivularis 6626 6621 CLPA8 Clermontia parviflora 6836 6827 CYSO2 Cyanea solenocalyx 6627 6622 CLPE2 Clermontia peleana 6837 6829 CYST5 Cyanea stictophylla pg.236 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 6838 6830 CYSU8 Cyanea superba 7166 7144 FAMO Falcataria moluccana 6841 6833 CYTR6 Cyanea tritomantha 7182 7162 FINO3 Ficus nota 6849 6837 CYCO18 Cyathea cooperi 7192 7175 FITH2 Ficus thonningii 6864 6864 CYRA3 Cyrtandra ramosissima 7193 7193 FLUEG Flueggea spp. 6866 6866 CYRTA Cyrtandra spp. 7203 7182 FISP3 Fitchia speciosa 6878 6865 CYGI3 Cyrtandra giffardii 7208 7188 FLBR Flindersia brayleyana 6881 6881 DELIS Delissea spp. 7209 7209 FUCHS Fuchsia spp. 6884 6884 DELON Delonix spp. 7212 7192 FLNE Flueggea neowawraea 6888 6875 DEFA Delissea fallax 7220 7200 FRCA12 Frangula californica 6889 6876 DELA4 Delissea laciniata 7224 7206 FRUH Fraxinus uhdei 6890 6877 DENI Delissea niihauensis 7226 7207 FUBO Fuchsia boliviana 6893 6880 DEPA9 Delissea parviflora 7227 7208 FUPA2 Fuchsia paniculata 6894 6882 DEUN2 Delissea undulata 7227 7227 GARDE Gardenia spp. 6911 6898 DISU11 Dillenia suffruticosa 7243 7245 GLSE2 Gliricidia sepium 6913 6900 DIBL3 Diospyros blancoi 7243 7224 GABR Gardenia brighamii 6919 6906 DIHI4 Diospyros hillebrandii 7244 7225 GAMA6 Gardenia mannii 6924 6911 DISA10 Diospyros sandwicensis 7245 7226 GARE Gardenia remyi 6944 6944 DUDE Dubautia demissifolia 7246 7228 GATA Gardenia taitensis 6945 6930 DOHE2 Dovyalis hebecarpa 7274 7274 GREVI Grevillea spp. 6945 6945 DUFA2 Dubautia fallax 7282 7262 GOBA Gossypium barbadense 6946 6946 DUMO2 Dubautia montana 7283 7264 GOHIH2 Gossypium hirsutum 6958 6958 DUBAU Dubautia spp. 7293 7272 GRBA Grevillea banksii 6963 6947 DUAR Dubautia arborea 7343 7321 HACA2 Haematoxylum campechianum 6964 6948 DUKN Dubautia knudsenii 7345 7345 HEDYO2 Hedyotis spp. 6968 6952 DUMI Dubautia microcephala 7350 7350 HELIO Heliocarpus spp. 6969 6953 DUPL Dubautia plantaginea 7365 7343 HEFO5 Hedyotis fosbergii 6973 6957 DURE2 Dubautia reticulata 7366 7344 HEHI8 Hedyotis hillebrandii 6979 6961 DUER Duranta erecta 7367 7346 HETE21 Hedyotis terminalis 6993 6975 ELBI Elaeocarpus bifidus 7371 7349 HEPO4 Heliocarpus popayanensis 6996 6996 ENCY Enterolobium cyclocarpum 7373 7373 HESPE8 Hesperomannia spp. 6999 6999 ERIOB Eriobotrya spp. 7376 7376 HETER5 Heteromeles spp. 7031 7012 ERSA11 Erythrina sandwicensis 7390 7390 HIBIS Hibiscadelphus spp. 7046 7025 EUBO2 Eucalyptus botryoides 7394 7370 HEAR9 Hesperomannia arborescens 7047 7026 EUBR2 Eucalyptus bridgesiana 7395 7371 HEAR10 Hesperomannia arbuscula 7048 7028 EUCI80 Eucalyptus cinerea 7396 7372 HELY Hesperomannia lydgatei 7050 7030 EUCL Eucalyptus cladocalyx 7398 7374 HEAR5 Heteromeles arbutifolia 7051 7031 EUCO3 Eucalyptus cornuta 7403 7403 HIEL Hibiscus elatus 7052 7032 EUCR Eucalyptus crebra 7406 7389 HIPU2 Hibiscadelphus puakuahiwi 7053 7033 EUDE Eucalyptus deanei 7408 7384 HIBO2 Hibiscadelphus bombycinus 7055 510 EUCAL Eucalyptus spp. 7409 7385 HICR Hibiscadelphus crucibracteatus 7057 7038 EUGO Eucalyptus gomphocephala 7410 7386 HIDI Hibiscadelphus distans 7058 7039 EUGO2 Eucalyptus goniocalyx 7411 7387 HIGI Hibiscadelphus giffardianus 7059 7041 EUHE12 Eucalyptus hemiphloia 7411 7411 HIBIS2 Hibiscus spp. 7062 7044 EUMA4 Eucalyptus marginata 7412 7388 HIHU Hibiscadelphus hualalaiensis 7063 7045 EUMI Eucalyptus microcorys 7413 7391 HIWI Hibiscadelphus wilderianus 7064 7046 EUPA Eucalyptus paniculata 7414 7392 HIWO Hibiscadelphus woodii 7066 7048 EURA4 Eucalyptus raveretiana 7417 7393 HIAR Hibiscus arnottianus 7067 7049 EURE2 Eucalyptus resinifera 7421 7397 HIBR Hibiscus brackenridgei 7068 7051 EURU2 Eucalyptus rudis 7425 7401 HICA6 Hibiscus calyphyllus 7069 7052 EUSA17 Eucalyptus salicifolia 7426 7402 HICL Hibiscus clayi 7072 7056 EUTE Eucalyptus tereticornis 7428 7404 HIKO Hibiscus kokio 7073 7057 EUVI Eucalyptus viminalis 7431 7407 HIMA5 Hibiscus macrophyllus 7098 7079 EUKO Eugenia koolauensis 7432 7408 HIMU3 Hibiscus mutabilis

REE SPECIES LIST BY OLD NIMS CODE 7115 7115 EUPHO Euphorbia spp. 7436 7413 HIWA Hibiscus waimeae 7120 7120 EURYA Eurya spp. 7440 7440 HYLOC Hylocereus spp. 7131 7110 EUHA2 Euphorbia haeleeleana 7464 7441 HYUN3 Hylocereus undatus

FSM T

: 7132 7132 EXOCA Exocarpos spp. 7464 7464 ILEX Ilex spp. 7135 7114 EUPU9 Euphorbia pulcherrima 7472 7448 HYCA11 Hypericum canariense 7136 7116 EUTI Euphorbia tirucalli 7477 7453 ILAN Ilex anomala 7141 7119 EUSA6 Eurya sandwicensis 7478 7454 ILAQ80 Ilex aquifolium 7145 7145 FALCA2 Falcataria spp. 7483 7460 ILPA3 Ilex paraguariensis 7154 7131 EXGA Exocarpos gaudichaudii 7483 7483 JACAR Jacaranda spp.

Section B.4 pg.237 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 7494 7494 JATRO Jatropha spp. 7767 7767 MELOC Melochia spp. 7513 7513 KOKIA Kokia spp. 7768 7747 MEPU4 Melicope puberula 7514 7491 JACU2 Jatropha curcas 7769 7748 MEQU3 Melicope quadrangularis 7517 7517 KUNZE Kunzea spp. 7770 7749 MERA2 Melicope radiata 7523 7523 LABOR Labordia spp. 7770 7770 MEVIC4 Melochia villosissima var 7529 7509 KOCO2 Kokia cookei compacta 7530 7510 KODR Kokia drynarioides 7771 7771 MEVIV Melochia villosissima var 7531 7511 KOKA Kokia kauaiensis villosissima 7532 7512 KOLA2 Kokia lanceolata 7772 7751 MERO3 Melicope rotundifolia 7537 7516 KUER Kunzea ericoides 7773 7752 MESA4 Melicope saint-johnii 7539 7518 LAFA2 Labordia fagraeoidea 7774 7753 MESA5 Melicope sandwicensis 7540 7519 LAHE2 Labordia hedyosmifolia 7775 7755 MEVO Melicope volcanica 7541 7520 LAHI5 Labordia hirtella 7776 7756 MEWA2 Melicope waialealae 7542 7521 LAKA Labordia kaalae 7777 7757 MEWA4 Melicope wawraeana 7543 7522 LALY2 Labordia lydgatei 7778 7758 MEZA Melicope zahlbruckneri 7544 7524 LATI2 Labordia tinifolia 7784 7783 MEPO5 Metrosideros polymorpha 7548 7528 LATR4 Labordia triflora 7785 7783 MEPO5 Metrosideros polymorpha 7549 7529 LAWA3 Labordia waiolani 7786 7783 MEPO5 Metrosideros polymorpha 7562 7562 LEPTO4 Leptospermum spp. 7787 7783 MEPO5 Metrosideros polymorpha 7576 7576 LIGUS2 Ligustrum spp. 7788 7783 MEPO5 Metrosideros polymorpha 7579 7558 LEMO20 Leptospermum morrisonii 7789 7783 MEPO5 Metrosideros polymorpha 7580 7559 LEPE23 Leptospermum petersonii 7790 7783 MEPO5 Metrosideros polymorpha 7581 7560 LEPO22 Leptospermum polygalifolim 7791 7783 MEPO5 Metrosideros polymorpha 7582 7561 LESC2 Leptospermum scoparium 7793 7769 MEUM3 Melochia umbellata 7598 7575 LISI Ligustrum sinense 7793 7793 METRO Metrosideros spp. 7620 7595 LOCO9 Lophostemon confertus 7806 7782 MEMA4 Metrosideros macropus 7646 7621 MAMA28 Macaranga mappa 7807 7783 MEPO5 Metrosideros polymorpha 7661 7661 MANIH Manihot spp. 7816 7792 MERU2 Metrosideros rugosa 7663 7639 MAPH4 Mallotus philippensis 7817 7794 METR5 Metrosideros tremuloides 7709 7709 MELAL Melaleuca spp. 7818 7795 MEWA Metrosideros waialealae 7716 7716 MELIA Melia spp. 7831 7805 MICA20 Miconia calvescens 7734 7712 MECA9 Melastoma candidum 7842 7842 MONTA Montanoa spp. 7735 7713 MESA3 Melastoma sanguineum 7848 7848 MOREL2 Morella spp. 7740 7719 MEAN3 Melicope anisata 7868 7868 MUNTI Muntingia spp. 7741 7720 MEBA2 Melicope balloui 7870 7841 MOHI Montanoa hibiscifolia 7742 7721 MEBA3 Melicope barbigera 7872 7872 MUPA3 Musa paradisiaca 7743 7722 MECH2 Melicope christophersenii 7874 7845 MOCE2 Morella cerifera 7744 7723 MECI6 Melicope cinerea 7875 7846 MOFA Morella faya 7745 7724 MECL Melicope clusiifolia 7880 7853 MOTR Morinda trimera 7746 7725 MECR5 Melicope cruciata 7884 7884 MYOPO Myoporum spp. 7747 7726 MEEL2 Melicope elliptica 7892 7865 MURA3 Munroidendron racemosum 7748 7727 MEHA7 Melicope haleakalae 7892 7892 MYRCI Myrcia spp. 7749 7728 MEHA3 Melicope haupuensis 7900 7900 MYRIC Myrica spp. 7750 7729 MEHA4 Melicope hawaiensis 7901 7906 MYIN4 Myristica inutilis 7910 7883 MYSA Myoporum sandwicense

7751 7730 MEHI6 Melicope hiiakae Appendix B: 7752 7731 MEHO2 Melicope hosakae 7927 7927 MYRSI Myrsine spp. 7753 7732 MEKA2 Melicope kaalaensis 7938 7910 MYAL4 Myrsine alyxifolia 7754 7733 MEKN Melicope knudsenii 7940 7913 MYDE2 Myrsine degeneri 7754 7754 MELIC3 Melicope spp. 7941 7914 MYEM Myrsine emarginata 7755 7734 MEMA6 Melicope macropus 7942 7915 MYFE Myrsine fernseei 7756 7735 MEMA7 Melicope makahae 7943 7916 MYFO Myrsine fosbergii 7757 7736 MEMO6 Melicope molokaiensis 7945 7918 MYHE3 Myrsine helleri 7758 7737 MEMU4 Melicope mucronulata 7946 7919 MYKA Myrsine kauaiensis TREE SPECIES LIST 7759 7738 MEOA Melicope oahuensis 7947 7920 MYKN Myrsine knudsenii 7760 7739 MEOB4 Melicope obovata 7948 7921 MYLA3 Myrsine lanaiensis 7761 7740 MEOR4 Melicope orbicularis 7949 7922 MYLE2 Myrsine lessertiana 7762 7741 MEOV Melicope ovalis 7950 7923 MYME2 Myrsine mezii 7763 7742 MEOV2 Melicope ovata 7951 7924 MYPE3 Myrsine petiolata 7764 7743 MEPA6 Melicope pallida 7952 7925 MYPU2 Myrsine pukooensis 7765 7744 MEPA7 Melicope paniculata 7953 7926 MYSA2 Myrsine sandwicensis 7766 7745 MEPE9 Melicope peduncularis 7954 7928 MYWA Myrsine wawraea 7767 7746 MEPS Melicope pseudoanisata 7961 7961 NESTE Nestegis spp. pg.238 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 7965 7965 NICOT Nicotiana spp. 8298 8257 PLAU2 Pleomele aurea 7970 7970 NOTHO3 Nothocestrum spp. 8299 8258 PLAU5 Pleomele auwahiensis 7977 7977 OCHNA Ochna spp. 8300 8259 PLFE Pleomele fernaldii 7983 7954 NEME5 Neraudia melastomifolia 8301 8260 PLFO2 Pleomele forbesii 7986 7986 OCHRO2 Ochrosia spp. 8302 8261 PLHA3 Pleomele halapepe 7989 7960 NESA2 Nestegis sandwicensis 8303 8262 PLHA4 Pleomele hawaiiensis 7993 7964 NIGL Nicotiana glauca 8318 8318 PRFO Pritchardia forbesiana 7995 7966 NOBR2 Nothocestrum breviflorum 8319 8319 PRHA2 Pritchardia hardyi 7996 7967 NOLA Nothocestrum latifolium 8322 8322 PRLA3 Pritchardia lanaiensis 7997 7968 NOLO Nothocestrum longifolium 8337 8337 PRITC Pritchardia spp. 7998 7969 NOPE Nothocestrum peltatum 8338 8338 PRVI2 Pritchardia viscosa 8001 7971 NOHU Nototrichium humile 8341 8304 POSA11 Pouteria sandwicensis 8002 7972 NOSA Nototrichium sandwicense 8341 8341 PRPE6 Procris pedunculata 8007 7978 OCTH Ochna thomasiana 8345 755 PROSO Prosopis spp. 8007 8007 OLEA Olea spp. 8352 8315 PRAF Pritchardia affinis 8012 7982 OCCO Ochrosia compta 8353 8316 PRAR2 Pritchardia arecina 8013 7983 OCHA Ochrosia haleakalae 8354 8317 PRBE Pritchardia beccariana 8014 7984 OCKA Ochrosia kauaiensis 8357 8320 PRHI Pritchardia hillebrandii 8015 7985 OCKI Ochrosia kilaueaensis 8358 8321 PRKA Pritchardia kaalae 8018 8018 OPUNT Opuntia spp. 8359 8323 PRLA4 Pritchardia lanigera 8037 8004 OLEU Olea europaea 8360 8324 PRLI2 Pritchardia limahuliensis 8046 8013 OPCO4 Opuntia cochenillifera 8361 8325 PRLO2 Pritchardia lowreyana 8047 8014 OPFI Opuntia ficus-indica 8362 8326 PRMA5 Pritchardia martii 8048 8015 OPMO5 Opuntia monacantha 8363 8327 PRMI3 Pritchardia minor 8074 8074 PAKA Palaquium karrak 8364 8328 PRMU3 Pritchardia munroi 8112 8112 PARKI2 Parkinsonia spp. 8366 8330 PRPE7 Pritchardia perlmanii 8137 720 PERSE Persea spp. 8367 8331 PRRE Pritchardia remota 8144 8107 PAKO5 Parkia korom 8372 8336 PRSC Pritchardia schattaueri 8149 8111 PAAC3 Parkinsonia aculeata 8374 8339 PRWA Pritchardia waialealeana 8169 8131 PESA3 Perrottetia sandwicensis 8382 8343 PRJU Prosopis juliflora 8189 100 PINUS Pinus spp. 8383 8344 PRPA4 Prosopis pallida 8190 8155 PHDA5 Photinia davidiana 8393 8355 PSCA Psidium cattleianum 8194 8159 PHDI10 Phyllanthus distichus 8402 8365 PSFA Psychotria fauriei 8207 8207 PIPTU Pipturus spp. 8403 8366 PSGR Psychotria grandiflora 8210 8175 PIDI2 Pimenta dioica 8406 8369 PSGR3 Psychotria greenwelliae 8210 8210 PISCI Piscidia spp. 8406 8406 PTERA Pteralyxia spp. 8219 8183 PICA18 Pinus caribaea 8407 8370 PSHA2 Psychotria hathewayi 8223 8187 PIPA13 Pinus patula 8410 8373 PSHA3 Psychotria hawaiiensis 8224 8188 PIPI6 Pinus pinaster 8414 8377 PSHE2 Psychotria hexandra 8224 8224 PIMO4 Pittosporum monae 8419 8382 PSHEO Psychotria hexandra ssp. 8243 8205 PIAL2 Pipturus albidus oahuensis 8249 8212 PIBR3 Pisonia brunoniana 8423 8386 PSHO Psychotria hobdyi 8251 8214 PISA5 Pisonia sandwicensis 8425 8388 PSKA Psychotria kaduana 8252 8252 PLATY Platydesma spp. 8429 8392 PSMA6 Psychotria mariniana 8254 8218 PIWA2 Pisonia wagneriana 8430 8393 PSMA7 Psychotria mauiensis 8263 8263 PLEOM Pleomele spp. 8435 8435 RAUVO Rauvolfia spp. 8265 8226 PIAR4 Pittosporum argentifolium 8437 8401 PSWA2 Psychotria wawrae 8266 8227 PICO4 Pittosporum confertiflorum 8445 8404 PTKA Pteralyxia kauaiensis 8267 8228 PIFL4 Pittosporum flocculosum 8446 8405 PTMA Pteralyxia macrocarpa 8268 8229 PIGA2 Pittosporum gayanum 8464 8424 QUSU5 Quercus suber 8269 8230 PIGL4 Pittosporum glabrum 8465 8465 RHODO2 Rhodomyrtus spp. 8270 8231 PIHA3 Pittosporum halophilum 8468 8468 RHUS Rhus spp. 8271 8232 PIHA4 Pittosporum hawaiiense 8473 8473 RICIN Ricinus spp.

REE SPECIES LIST BY OLD NIMS CODE 8272 8233 PIHO Pittosporum hosmeri 8475 8434 RASA3 Rauvolfia sandwicensis 8273 8234 PIKA3 Pittosporum kauaiense 8483 8442 RESA Reynoldsia sandwicensis 8274 8235 PINA Pittosporum napaliense 8488 8718 TABEB Tabebuia spp.

FSM T

: 8275 8236 PIPE8 Pittosporum pentandrum 8505 8466 RHTO10 Rhodomyrtus tomentosa 8277 8239 PITE5 Pittosporum terminalioides 8506 8506 SAMAN Samanea spp. 8278 8240 PIUN2 Pittosporum undulatum 8507 8467 RHSA2 Rhus sandwicensis 8279 8241 PIVI5 Pittosporum viridiflorum 8510 8510 SAMBU Sambucus spp. 8291 8250 PLRE4 Platydesma remyi 8512 8472 RICO3 Ricinus communis 8292 8251 PLSP3 Platydesma spathulata 8526 8526 SANTA Santalum spp.

Section B.4 pg.239 Old NIMSNew NIMS NRCS Scientific Old NIMSNew NIMS NRCS Scientific 8531 8531 SAPIN Sapindus spp. 8862 8822 TOLA Touchardia latifolia 8547 8509 SANIC4 Sambucus nigra 8870 8870 VERNI Vernicia spp. 8548 8548 SCCE3 Scaevola cerasifolia 8893 8892 WIOA Wikstroemia oahuensis 8552 8552 SCAEV Scaevola spp. 8897 8856 URGL Urera glabra 8554 8525 SASA8 Santalum salicifolium 8898 8857 URKA Urera kaalae 8555 8555 SCHAE Schaefferia spp. 8899 8899 WIKST Wikstroemia spp. 8556 8516 SAEL2 Santalum ellipticum 8909 8869 VEMO3 Vernicia montana 8557 8517 SAFR4 Santalum freycinetianum 8911 8872 VICO17 Vitex cofassus 8561 8521 SAHA3 Santalum haleakalae 8914 8876 VITR7 Vitex trifolia 8562 8522 SAPA7 Santalum paniculatum 8915 8915 XYLOS Xylosma spp. 8564 8563 SCTE Schinus terebinthifolius 8928 8889 WIBI Wikstroemia bicornuta 8568 8528 SAOA3 Sapindus oahuense 8929 8890 WIFU Wikstroemia furcata 8569 8529 SASA4 Sapindus saponaria 8930 8891 WIMO Wikstroemia monticola 8588 8549 SCCH3 Scaevola chamissoniana 8931 8892 WIOA Wikstroemia oahuensis 8589 8550 SCGA2 Scaevola gaudichaudiana 8934 8895 WIPH2 Wikstroemia phillyreifolia 8590 8551 SCPR Scaevola procera 8935 8896 WIPU Wikstroemia pulcherrima 8598 8598 SENNA Senna spp. 8936 8897 WISA Wikstroemia sandwicensis 8601 8561 SCMO Schinus molle 8936 8936 ZANTH Zanthoxylum spp. 8607 8607 SESBA Sesbania spp. 8937 8898 WISK Wikstroemia skottsbergiana 8608 8608 SHIN Shirakiopsis indica 8938 8900 WIVI Wikstroemia villosa 8610 8610 SIDA Sida spp. 8947 8907 XYCR Xylosma crenata 8628 8588 SEAL4 Senna alata 8948 8908 XYHA Xylosma hawaiiensis 8630 8590 SEGA2 Senna gaudichaudii 8967 8925 ZADI Zanthoxylum dipetalum 8631 8591 SEMU5 Senna multijuga 8971 8929 ZAHA Zanthoxylum hawaiiense 8632 8592 SEPE4 Senna pendula 8972 8930 ZAKA Zanthoxylum kauaense 8635 8595 SESE13 Senna septemtrionalis 8975 8933 ZAOA Zanthoxylum oahuense 8635 8635 SOLAN Solanum spp. 9000 999 2TREE Tree unknown 8638 8599 SESU10 Senna sulfurea 9001 999 2TREE Tree unknown 8639 8600 SESU4 Senna surattensis 9002 999 2TREE Tree unknown 8642 8642 SOPHO Sophora spp. 9003 999 2TREE Tree unknown 8645 8645 SPATH Spathodea spp. 9004 999 2TREE Tree unknown 8647 8606 SESE8 Sesbania sesban 9005 999 2TREE Tree unknown 8671 8631 SOMA3 Solanum mauritianum 9006 999 2TREE Tree unknown 8671 8671 STREB Streblus spp. 9007 999 2TREE Tree unknown 8673 8636 SOTO4 Solanum torvum 9008 999 2TREE Tree unknown 8680 8641 SOCH Sophora chrysophylla 9009 999 2TREE Tree unknown 8690 8690 SYNCA Syncarpia spp. 9010 999 2TREE Tree unknown 8708 8708 SYZYG Syzygium spp. 9011 999 2TREE Tree unknown 8729 8689 SYGL Syncarpia glomulifera 9012 999 2TREE Tree unknown 8745 8706 SYSA Syzygium sandwicense 9013 999 2TREE Tree unknown 8745 8745 TECTO Tectona spp. 9014 999 2TREE Tree unknown 8775 8775 TETRA1 Tetraplasandra spp. 9015 999 2TREE Tree unknown 1 9020 999 2TREE Tree unknown 8782 8741 TECA9 Tecoma castanifolia 9030 999 2TREE Tree unknown 8788 8788 THESP Thespesia spp.

9999 999 2TREE Tree unknown Appendix B: 8797 8756 TEMY Terminalia myriocarpa 8804 8804 TIBOU Tibouchina spp. 8813 8770 TEFL5 Tetraplasandra flynnii 8814 8771 TEGY Tetraplasandra gymnocarpa 8815 8772 TEHA2 Tetraplasandra hawaiensis 8815 8811 TOONA Toona spp. 8816 8773 TEKA3 Tetraplasandra kavaiensis

8817 8774 TEOA Tetraplasandra oahuensis TREE SPECIES LIST 8818 8776 TEWA Tetraplasandra waialealae 8819 8777 TEWA3 Tetraplasandra waimeae 8823 8779 TEBI Tetrazygia bicolor 8823 8823 TOUCH Touchardia spp. 8826 8826 TOURN Tournefortia spp. 8834 8789 THPE3 Thevetia peruviana 8846 8805 TIUR Tibouchina urvilleana 8851 8812 TOCI Toona ciliata 8858 8858 URERA Urera spp. pg.240 SECTION B.5 FSM TREE SPECIES LIST BY SCIENTIFIC NAME

Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Acacia aneura ACAN10 6002 6002 Acacia auriculiformis ACAU 6003 49 black wattle black wattle black wattle black wattle Acacia auriculiformis ACAU 6003 49 tuhkehn pwelmwahu Acacia confusa ACCO 6004 278 formosan koa formosan koa formosan koa Acacia confusa ACCO 6004 278 pilampwoia Acacia farnesiana ACFA 303 303 Acacia koa ACKO 6006 281 Acacia koaia ACKO2 6007 6007 Acacia mangium ACMA12 6009 6009 Acacia mearnsii ACME80 6010 6009 Acacia melanoxylon ACME 6011 6010 Acacia parramattensis ACPA81 6014 6013 Acacia spp. ACACI 300 6016 Adenanthera pavonina ADPA 6028 400 kaikes coral bean tree coral bean tree Adenanthera pavonina ADPA 6028 400 metekam Adenanthera pavonina ADPA 6028 400 mwetkwem Adenanthera pavonina ADPA 6028 400 kulalis kulalis Adenanthera spp. ADENA 6029 6029 Adonidia merrillii VEME3 8866 682 Aglaia mariannensis AGMA14 6042 100 mesecheues Aglaia palauensis AGPA19 6043 800 Aglaia ponapensis AGPO4 6044 801 marasau marasau marasau marasau Aglaia ponapensis AGPO4 6044 801 karasyu Aglaia samoensis AGSA9 6046 403 Aglaia spp. AGLAI 6047 1020 Aidia cochinchinensis AICO2 6048 101 kahmant kahmant kahmant Aidia cochinchinensis AICO2 6048 101 gathimech Aidia racemosa AIRA2 6049 Ailanthus altissima AIAL 341 60 Ailanthus spp. AILAN 6051 6051 Albizia chinensis ALCH2 6057 405 Albizia falcataria ALFA5 6058 802 Albizia lebbeck ALLE 6059 102 gumomingabch ey Albizia lebbeck ALLE 6059 102 ngumormingobc hey Albizia retusa ALRE 6061 803 Albizia saman SASA10 8505 636 monkeypod monkeypod monkeypod monkeypod Albizia saman SASA10 8505 636 rain tree rain tree rain tree Albizia saman SASA10 8505 636 gumor ni spanis Albizia saponaria ALSA10 6062 6059 Albizia spp. ALBIZ 6063 1010 Alectryon macrococcus ALMA 6069 6067 Alectryon macrococcus ALMA 6069 6070 Alectryon macrococcus ALMA 6069 6071 Alectryon spp. ALECT 6073 6073 Aleurites moluccana ALMO2 6075 407 candlenut candlenut candlenut Aleurites moluccana ALMO2 6075 407 sakan Aleurites moluccana ALMO2 6075 6076 Aleurites spp. ALEUR 6077 1030 Aleurites trisperma ALTR11 6078 103

REE SPECIES LIST BY SCIENTIFIC NAME Allophylus spp. ALLOP 6083 1040 allophylus allophylus allophylus allophylus Allophylus ternatus ALTE13 6084 804 Allophylus timorensis ALTI2 6085 408 kitak

FSM T

: Allophylus timorensis ALTI2 6085 408 nguh Allophylus timorensis ALTI2 6085 408 ngu Allophylus timorensis ALTI2 6085 408 angel Allophylus timorensis ALTI2 6085 408 ngo Allophylus triphyllus ALTE13 6084 6084 ungeh Alnus nepalensis ALNE2 6086 6086

Section B.5 pg.241 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Alnus spp. ALNUS 350 6087 Alphitonia carolinensis ALCA21 6088 805 Alphitonia ponderosa ALPO3 6089 6089 Alphitonia spp. ALPHI 6090 1050 Alphitonia zizyphoides ALZI 6091 409 Alstonia macrophylla ALMA16 6095 6094 Alstonia pacifica ALPA22 6096 410 Alstonia spp. ALSTO 6097 6097 Anacardium occidentale ANOC 6107 104 cashew cashew cashew cashew Anacolosa insularis ANIN13 6109 411 Angiopteris evecta ANEV 6118 806 payuit Angiopteris evecta ANEV 6118 806 umpai Angiopteris evecta ANEV 6118 806 mongmong Annona cherimola ANCH9 6124 10 cherimoya cherimoya cherimoya cherimoya Annona muricata ANMU2 6128 412 sour sop sour sop sour sop sour sop Annona muricata ANMU2 6128 412 sae Annona muricata ANMU2 6128 412 truka shai Annona muricata ANMU2 6128 412 sosap Annona muricata ANMU2 6128 412 sausau Annona muricata ANMU2 6128 412 saasap Annona muricata ANMU2 6128 412 sasaf Annona reticulata ANRE 6129 105 Annona spp. ANNON 6130 1060 annona annona annona annona Annona squamosa ANSQ 6131 413 sugar apple sugar apple sugar apple sugar apple Annona squamosa ANSQ 6131 413 chai Annona squamosa ANSQ 6131 413 tai Antidesma bunius ANBU3 6137 106 Antidesma kapuae ANKA 6135 6135 Antidesma kusaiense ANKU3 6138 972 China laurel China laurel China laurel China laurel Antidesma platyphyllum ANPL2 6139 6136 Antidesma platyphyllum ANPL2 6139 6140 Antidesma platyphyllum ANPL2 6139 6141 Antidesma ponapense ANPO8 6142 6139 China laurel China laurel China laurel China laurel Antidesma pulvinatum ANPU2 6143 6140 Antidesma sphaerocarpum ANSP14 6144 415 Antidesma spp. ANTID 6145 1070 China laurel China laurel China laurel China laurel Antirhea inconspicua ANIN2 6148 416 Araucaria angustifolia ARAN15 6154 6154 Araucaria columnaris ARCO32 6155 107 Cook pine Araucaria excelsa AREX4 6156 111 Araucaria heterophylla ARHE12 6157 108 Norfolk Island pine Araucaria spp. ARAUC2 6158 1080 araucaria araucaria araucaria araucaria Archontophoenix alexandrae ARAL 6159 6159 Ardisia elliptica AREL4 6161 6161 Appendix B: Ardisia spp. ARDIS 6166 6166 Areca catechu ARCA41 6167 417 pu pu pu Arenga pinnata ARPI6 6169 109 Artocarpus altilis ARAL7 6171 293 breadfruit breadfruit breadfruit breadfruit Artocarpus altilis ARAL7 6171 293 mahi Artocarpus altilis ARAL7 6171 293 mei mei mei Artocarpus altilis ARAL7 6171 293 kur

Artocarpus altilis ARAL7 6171 293 maiuhp TREE SPECIES LIST Artocarpus altilis ARAL7 6171 293 mos Artocarpus altilis ARAL7 6171 293 ikunal Artocarpus altilis ARAL7 6171 293 srafohn Artocarpus altilis ARAL7 6171 293 mai Artocarpus altilis ARAL7 6171 293 maichul Artocarpus altilis ARAL7 6171 293 maieas Artocarpus heterophyllus ARHE2 6173 294 jackfruit jackfruit Artocarpus heterophyllus ARHE2 6173 294 dapanapan Artocarpus heterophyllus ARHE2 6173 294 maifai pg.242 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Artocarpus mariannensis ARMA28 6175 110 seeded seeded seeded seeded breadfruit breadfruit breadfruit breadfruit Artocarpus mariannensis ARMA28 6175 110 mei kole Artocarpus mariannensis ARMA28 6175 110 maipah Artocarpus mariannensis ARMA28 6175 110 mos en Kosrae Artocarpus mariannensis ARMA28 6175 110 mei chocho Artocarpus mariannensis ARMA28 6175 110 maiyah Artocarpus nobilis ARNO 6176 295 Artocarpus odoratissimus AROD2 6177 419 Artocarpus spp. ARTOC 6178 1090 breadfruit Artocarpus spp. ARTOC 6178 1090 mai Artocarpus spp. ARTOC 6178 1090 saposa Arytera brackenridgei ARBR11 6179 420 Ascarina diffusa ASDI14 6181 421 Astronidium navigatorum ASNA10 6185 422 Astronidium palauense ASPA37 6186 807 Astronidium pickeringii ASPI11 6187 423 Astronidium samoense ASSA23 6188 424 Astronidium spp. ASTRO4 6189 1100 Astronidium subcordata ASSU31 6190 425 Atuna racemosa ATRA2 6193 426 aees Atuna racemosa ATRA2 6193 426 ais Atuna racemosa ATRA2 6193 426 ayis Averrhoa bilimbi AVBI 6197 427 bilimbi Averrhoa bilimbi AVBI 6197 427 kumim Averrhoa carambola AVCA 6198 428 ansu Averrhoa carambola AVCA 6198 428 arfath Averrhoa carambola AVCA 6198 428 starfruit starfruit starfruit starfruit Averrhoa spp. AVERR 6199 1110 averrhoa averrhoa averrhoa averrhoa Avicennia alba AVAL 6200 707 Avicennia marina AVMA3 6203 6204 Avicennia Avicennia Avicennia Avicennia marina marina marina marina Avicennia marina AVMA3 6203 695 Avicennia marina subsp. Marina AVAL 6200 707 Avicennia alba Avicennia alba Avicennia alba Avicennia alba Avicennia spp. AVICE 6205 1120 Avicennia Avicennia Avicennia Avicennia Azadirachta indica AZIN2 6206 Indian lilac Indian lilac Indian lilac Indian lilac Azadirachta indica AZIN2 6206 neem neem neem neem Baccaurea taitensis BATA 6208 429 Bactris gasipaes BAGA2 5261 peach palm peach palm peach palm peach palm Badusa palauensis BAPA8 6213 808 Bambusa spp. BAMBU 6215 6215 bamboo bamboo bamboo bamboo (clumping only) (clumping only) (clumping only) (clumping only) Bambusa spp. BAMBU 6215 6215 pehri Bambusa spp. BAMBU 6215 6215 pehri en sapahn Bambusa spp. BAMBU 6215 6215 pambu Bambusa spp. BAMBU 6215 6215 moor Bambusa spp. BAMBU 6215 6215 iich Bambusa vulgaris BAVU2 6216 6216 Barringtonia asiatica BAAS3 6220 430 wihnmar Barringtonia asiatica BAAS3 6220 430 fish poison tree fish poison tree fish poison tree fish poison tree Barringtonia asiatica BAAS3 6220 430 angaiha Barringtonia asiatica BAAS3 6220 430 wihnsed Barringtonia asiatica BAAS3 6220 430 bus bus

REE SPECIES LIST BY SCIENTIFIC NAME Barringtonia asiatica BAAS3 6220 430 ghuul ghuul ghuul Barringtonia asiatica BAAS3 6220 430 biuol Barringtonia asiatica BAAS3 6220 430 kuun

FSM T Barringtonia asiatica BAAS3 6220 430 azan : Barringtonia racemosa BARA5 6221 112 wihnmar wihmar wihmar wihmar Barringtonia racemosa BARA5 6221 112 wih Barringtonia racemosa BARA5 6221 112 kange Barringtonia racemosa BARA5 6221 112 kwenguhl Barringtonia racemosa BARA5 6221 112 wathol

Section B.5 pg.243 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Barringtonia racemosa BARA5 6221 112 soon Barringtonia racemosa BARA5 6221 112 guon Barringtonia samoensis BASA9 6222 431 Barringtonia spp. BARRI 6223 1130 Barringtonia Barringtonia Barringtonia Barringtonia Bauhinia binata BABI6 6225 809 Bauhinia monandra BAMO2 6226 113 flamboyant Bauhinia spp. BAUHI 6230 1140 Bischofia javanica BIJA 6236 432 Bischofia spp. BISCH 6237 6237 Bixa orellana BIOR 6238 6238 lipstick plant Bixa orellana BIOR 6238 6238 rang Bixa orellana BIOR 6238 6238 nofitin mongo Bixa orellana BIOR 6238 6238 food color Bixa spp. BIXA 6239 6239 Bobea brevipes BOBR3 6242 6242 Bobea elatior BOEL3 6243 6243 Bobea sandwicensis BOSA2 6244 6244 Bobea spp. BOBEA 6245 6245 Bobea timonioides BOTI 6246 6245 Bocconia frutescens BOFR2 6247 6248 Bocconia spp. BOCCO 6248 6248 Boehmeria virgata BOVI7 6250 433 Broussaisia arguta BRAR6 6260 6260 Broussonetia papyrifera BRPA4 6262 434 paper mulberry paper mulberry Brugmansia candida BRCA12 6264 6264 Bruguiera gymnorhiza BRSE11 6268 435 lom Bruguiera gymnorhiza BRSE11 6268 435 tongo Bruguiera gymnorhiza BRSE11 6268 435 Sroal Bruguiera gymnorhiza BRSE11 6268 435 song Bruguiera gymnorhiza BRSE11 6268 435 ong Bruguiera gymnorhiza BRSE11 6268 435 wong Bruguiera parviflora BRPA15 6267 6267 Bruguiera sexangula BRSE11 6268 435 Bruguiera spp. BRUGU 6269 6269 Buchanania engleriana BUEN 6277 810 Buchanania merrillii BUME4 6278 436 Buchanania palawensis BUPA16 6279 811 Buchanania spp. BUCHA 6280 1150 Buddleja asiatica BUAS 6286 6287 Burckella richii BURI3 6299 437 Caesalpinia kavaiensis CAKA5 6318 6318 Caesalpinia sappan CASA28 6320 114 kasapal Caesalpinia sappan CASA28 6320 114 sibukao Callistemon viminalis CAVI23 6329 weeping weeping weeping weeping

bottlebrush bottlebrush bottlebrush bottlebrush Appendix B: Calophyllum inophyllum CAIN4 6341 440 Alexandrian Alexandrian Alexandrian Alexandrian laurel laurel laurel laurel Calophyllum inophyllum CAIN4 6341 440 isou Calophyllum inophyllum CAIN4 6341 440 hetau Calophyllum inophyllum CAIN4 6341 440 ituu Calophyllum inophyllum CAIN4 6341 440 rakich rakich Calophyllum inophyllum CAIN4 6341 440 weengu weengu

Calophyllum inophyllum CAIN4 6341 440 rekich TREE SPECIES LIST Calophyllum inophyllum CAIN4 6341 440 Calophyllum inophyllum CAIN4 6341 440 Calophyllum neo-ebudicum CANE31 6342 439 Calophyllum pelewense CAPE15 6343 812 Calophyllum soulattri CASO12 6344 813 Calophyllum spp. CALOP 6345 1160 Calotropis procera CAPR 6346 6345 Calotropis spp. CALOT 6347 6347 Campnosperma brevipetiolata CABR42 6367 814 dohng pg.244 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Campnosperma brevipetiolata CABR42 6367 814 thong Campnosperma brevipetiolata CABR42 6367 814 elahk Campnosperma brevipetiolata CABR42 6367 814 ramluw Campnosperma brevipetiolata CABR42 6367 814 rramlluw Campnosperma brevipetiolatum CABR18 6366 814 Cananga odorata CAOD 6370 441 ylang ylang ylang ylang ylang ylang ylang ylang Cananga odorata CAOD 6370 441 pur n wai Cananga odorata CAOD 6370 441 seiren wai seirenwai Cananga odorata CAOD 6370 441 ilahnglahng pwanang Cananga odorata CAOD 6370 441 pwalang Canarium hirsutum CAHI14 6373 815 Canarium indicum CAIN42 6374 816 Canarium mafoa CAHA39 6372 443 Canarium ovatum CAOV7 6375 444 Canarium spp. CANAR2 6377 1170 Canarium vitiense CAVI26 6378 446 Carica papaya CAPA23 6395 448 mommyapple Carica papaya CAPA23 6395 448 memiap Carica papaya CAPA23 6395 448 mohmiyap Carica papaya CAPA23 6395 448 momiyap Carica papaya CAPA23 6395 448 es Carica papaya CAPA23 6395 448 bweibwai Carica papaya CAPA23 6395 448 baiwai waiwai Carica papaya CAPA23 6395 448 babay babae Carica papaya CAPA23 6395 448 kipau Carica papaya CAPA23 6395 448 kipwpwaaw Carica papaya CAPA23 6395 448 bwebwao Carica spp. CARIC 6396 6396 Carmona retusa CARE22 6397 6397 Carmona spp. CARMO 6398 6398 Caryota mitis CAMI36 6399 817 fishtail palm fishtail palm fishtail palm fishtail palm Caryota spp. CARYO 6400 1180 Caryota Caryota Caryota Caryota Caryota urens CAUR3 6401 115 Casearia cauliflora CACA28 6405 818 Casearia spp. CASEA 6408 1190 Cassia fistula CAFI3 6415 450 Cassia grandis CAGR11 6417 819 Cassia javanica CAJA3 6418 116 Cassia siamea CASI4 6420 820 Cassia siamea Cassia spp. CASSI 6422 1200 Cassia Castilla elastica CAEL5 6430 451 Casuarina cunninghamiana CACU8 6433 6433 Casuarina equisetifolia CAEQ 6434 452 ironwood ironwood ironwood Casuarina equisetifolia CAEQ 6434 452 sheoak sheoak sheoak Casuarina equisetifolia CAEQ 6434 452 weku weku Casuarina equisetifolia CAEQ 6434 452 wehku Casuarina equisetifolia CAEQ 6434 452 nach Casuarina equisetifolia CAEQ 6434 452 noc Casuarina equisetifolia CAEQ 6434 452 neokuk Casuarina equisetifolia CAEQ 6434 452 ueoku Casuarina equisetifolia CAEQ 6434 452 ueokuk Casuarina equisetifolia CAEQ 6434 452 weeku Casuarina glauca CAGL11 856 63

REE SPECIES LIST BY SCIENTIFIC NAME Casuarina litorea CALI8 6437 117 Casuarina Casuarina Casuarina litorea litorea litorea Casuarina spp. CASUA 855 1210

FSM T

: Catalpa longissima CALO8 6439 118 Cecropia obtusifolia CEOB 6441 6441 Cecropia spp. CECRO 6444 6444 Cedrela odorata CEOD 6445 6445 Ceiba pentandra CEPE2 6449 119 kapok kapok kapok kapok Ceiba pentandra CEPE2 6449 119 koatun

Section B.5 pg.245 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Ceiba pentandra CEPE2 6449 119 cottin Ceiba pentandra CEPE2 6449 119 cutin Ceiba pentandra CEPE2 6449 119 arughuschel arughuschel arughuschel Ceiba pentandra CEPE2 6449 119 batte ni gaken Ceiba pentandra CEPE2 6449 119 kkoton Celtis paniculata CEPA6 6452 821 Celtis spp. CELTI 460 1220 celtis Cerbera dilatata CEDI12 6459 120 apilas Cerbera dilatata CEDI12 6459 120 grey milkwood Cerbera floribunda CEFL2 6460 822 Cerbera manghas CEMA20 6461 454 pink-eyed pink-eyed pink-eyed pink-eyed cerbera cerbera cerbera cerbera Cerbera manghas CEMA20 6461 454 sos Cerbera manghas CEMA20 6461 454 seewuriinen Cerbera manghas CEMA20 6461 454 raatta Cerbera odollam CEOD2 6462 Cerbera spp. CERBE 6463 6463 Cereus hildmannianus CEHI3 6469 6469 Cereus spp. CEREU 6470 6470 Ceriops tagal CETA2 6472 708 Cestrum aurantiacum CEAU2 6473 6473 Cestrum diurnum CEDI6 6474 6474 Cestrum nocturnum CENO 6477 6477 Cestrum spp. CESTR 6478 6478 Chamaesyce atrococca CHAT2 6482 6482 Chamaesyce celastroides CHCE 6483 6483 Chamaesyce celastroides CHCE 6483 6484 Chamaesyce celastroides CHCE 6483 6485 Chamaesyce celastroides CHCE 6483 6486 Chamaesyce celastroides CHCE 6483 6487 Chamaesyce celastroides CHCE 6483 6488 Chamaesyce celastroides CHCE 6483 6489 Chamaesyce celastroides CHCE 6483 6490 Chamaesyce celastroides CHCE 6483 6491 Chamaesyce herbstii CHHE3 6492 6492 Chamaesyce kuwaleana CHKU 6493 6493 Chamaesyce olowaluana CHOL3 6494 6494 Chamaesyce rockii CHRO2 6495 6495 Chamaesyce spp. CHAMA1 6496 6496 5 Charpentiera densiflora CHDE3 6497 6499 Charpentiera elliptica CHEL 6498 6500 Charpentiera obovata CHOB2 6499 6501 Charpentiera ovata CHOV2 6500 6502 Charpentiera ovata CHOV2 6500 6501 Charpentiera spp. CHARP 6503 6503 Appendix B: Charpentiera tomentosa CHTO3 6504 6505 Charpentiera tomentosa CHTO3 6504 6506 Cheirodendron dominii CHDO3 6507 6510 Cheirodendron fauriei CHFA 6508 6508 Cheirodendron forbesii CHFO4 6509 6509 Cheirodendron platyphyllum CHPL 6510 6510

Cheirodendron platyphyllum CHPL 6510 6512 TREE SPECIES LIST Cheirodendron spp. CHEIR 6513 6513 Cheirodendron trigynum CHTR2 6514 6514 Cheirodendron trigynum CHTR2 6514 6515 Cheirodendron trigynum CHTR2 6514 6516 Chenopodium oahuense CHOA 6517 6521 Chenopodium spp. CHENO 6518 6518 Chionanthus vitiensis CHVI22 6525 456 Chrysophyllum cainito CHCA10 6541 457 Chrysophyllum oliviforme CHOL 6542 6545 pg.246 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Cibotium chamissoi CICH 6546 6550 Cibotium glaucum CIGL 6547 6551 Cibotium heleniae CIHE7 6545 6545 Cibotium menziesii CIME8 6548 6552 Cibotium spp. CIBOT 6549 6549 Cinchona pubescens CIPU 6552 6557 Cinchona spp. CINCH 6553 6553 Cinnamomum burmannii CIBU2 6555 6559 Cinnamomum camphora CICA 858 50 Cinnamomum carolinense CICA2 6557 823 mattieu Cinnamomum pedatinervium CIPE6 6561 824 Cinnamomum sessilifolium CISE2 6562 825 matieu Cinnamomum spp. CINNA2 6563 1240 Cinnamomum verum CIVE2 6564 458 Citharexylum caudatum CICA8 6565 6569 Citharexylum spinosum CISP3 6567 6570 Citharexylum spp. CITHA 6568 6568 Citronella samoensis CISA2 6570 460 Citrus aurantifolia CIAU 6572 461 karer Citrus aurantifolia CIAU 6572 461 laim laim Citrus aurantifolia CIAU 6572 461 remong Citrus aurantifolia CIAU 6572 461 naimis Citrus aurantifolia CIAU 6572 461 limes Citrus aurantium CIAU8 6574 121 Citrus grandis CIGR 6578 122 Citrus hystrix CIHY2 6579 212 Citrus limon CILI5 6575 124 Citrus macroptera CIMA10 6580 125 Citrus maxima CIMA5 6581 462 pummelo pummelo pummelo pummelo Citrus medica CIME3 6582 126 Citrus mitis CIMI3 6583 826 calamansi calamansi calamansi calamansi Citrus mitis CIMI3 6583 826 calamondin calamondin calamondin calamondin Citrus reticulata CIRE3 6584 463 Citrus sinensis CISI3 6577 464 orens Citrus sinensis CISI3 6577 464 gurgur Citrus spp. CITRU2 860 1250 citrus citrus citrus citrus Citrus spp. CITRU2 860 1250 muh Citrus spp. CITRU2 860 1250 iumwul Citrus spp. CITRU2 860 1250 kurukur Claoxylon carolinianum CLCA15 6586 827 koee Claoxylon fallax CLFA6 6588 828 Claoxylon longiracemosum CLLO5 6589 829 Claoxylon marianum CLMA25 6590 127 Claoxylon sandwicense CLSA 6591 6595 Claoxylon spp. CLAOX 6592 1260 Cleistanthus carolinianus CLCA18 6593 830 Cleistanthus insularis CLIN8 6594 831 Cleistanthus spp. CLEIS5 6595 1270 Clermontia arborescens CLAR4 6597 6602 Clermontia clermontioides CLCL 6601 6606 Clermontia drepanomorpha CLDR2 6604 6609 Clermontia fauriei CLFA 6605 6610 Clermontia grandiflora CLGR3 6606 6611

REE SPECIES LIST BY SCIENTIFIC NAME Clermontia hawaiiensis CLHA4 6610 6615 Clermontia kakeana CLKA 6611 6616 Clermontia kohalae CLKO 6612 6617

FSM T

: Clermontia leptoclada CLLE3 6596 6596 Clermontia lindseyana CLLI3 6613 6618 Clermontia micrantha CLMI3 6614 6619 Clermontia montis-loa CLMO5 6615 6620 Clermontia oblongifolia CLOB2 6616 6621 Clermontia pallida CLPA6 6620 6625

Section B.5 pg.247 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Clermontia parviflora CLPA8 6621 6626 Clermontia peleana CLPE2 6622 6627 Clermontia persicifolia CLPE3 6625 6630 Clermontia pyrularia CLPY2 6626 6631 Clermontia singuliflora CLSI3 6627 6632 Clermontia spp. CLERM 6628 6628 Clermontia tuberculata CLTU2 6629 6633 Clermontia waimeae CLWA2 6630 6634 Clerodendrum chinense CLCH4 6632 6641 Clerodendrum glabrum CLGL2 6633 6642 Clerodendrum indicum CLIN 6634 6643 Clerodendrum macrostegium CLMA24 6635 6644 Clerodendrum spp. CLERO2 6636 6636 Clinostigma carolinense CLCA21 6645 palm tree Clinostigma carolinense CLCA21 6645 kiniyaw Clinostigma carolinense CLCA21 6645 ochop Clusia rosea CLRO 6651 6660 Clusia spp. CLUSI 6652 6652 Coccoloba uvifera COUV 6670 128 seagrape seagrape seagrape seagrape Cocos nucifera CONU 908 466 coconut coconut coconut coconut Cocos nucifera CONU 908 466 ni Cocos nucifera CONU 908 466 nih Cocos nucifera CONU 908 466 lu lu Cocos nucifera CONU 908 466 koanu Cocos nucifera CONU 908 466 koacnu Cocos nucifera CONU 908 466 niiw Cocos nucifera CONU 908 466 lu nu Cocos nucifera CONU 908 466 nu Cocos nucifera CONU 908 466 nu arau Cocos spp. COCOS 6681 6681 Coffea arabica COAR2 6684 129 Coffea liberica COLI8 6686 130 Coffea robusta CORO8 6685 robusta coffee Coffea robusta CORO8 6685 koahpi Coffea spp. COFFE 6687 1280 Colona scabra COSC13 6691 832 Colubrina arborescens COAR3 6693 Colubrina asiatica COAS3 6694 6702 Colubrina oppositifolia COOP 6697 6704 Colubrina spp. COLUB 6699 6699 Combretum tetralophum COTE15 6702 833 Commersonia bartramia COBA17 6703 468 acarido Commersonia bartramia COBA17 6703 468 kahil Commersonia bartramia COBA17 6703 468 gagu

Commersonia bartramia COBA17 6703 468 wapof Appendix B: Commersonia bartramia COBA17 6703 468 oun Commersonia bartramia COBA17 6703 468 tupuchol Conocarpus erectus COER2 987 987 Conocarpus spp. CONOC 6709 6709 Coprosma foliosa COFO2 6716 6716 Coprosma kauensis COKA 6717 6723 Coprosma longifolia COLO4 6718 6724 Coprosma montana COMO3 6719 6725 TREE SPECIES LIST Coprosma ochracea COOC3 6720 6726 Coprosma pubens COPU8 6721 6727 Coprosma rhynchocarpa CORH 6722 6728 Coprosma spp. COPRO 6724 1290 Coprosma waimeae COWA4 6726 6731 Cordia aspera COAS6 6729 471 Cordia collococca COCO5 6731 6738 Cordia dichotoma CODI18 6733 131 Cordia micronesica COMI6 6736 834 pg.248 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Cordia sebestena COSE2 865 835 Cordia spp. CORDI 6741 1300 Cordia subcordata COSU2 6742 472 sea trumpet sea trumpet sea trumpet sea trumpet Cordia subcordata COSU2 6742 472 ikoik ikoik Cordia subcordata COSU2 6742 472 ahlew Cordia subcordata COSU2 6742 472 ikoack Cordia subcordata COSU2 6742 472 galu Cordia subcordata COSU2 6742 472 ganow Cordia subcordata COSU2 6742 472 ngau Cordia subcordata COSU2 6742 472 anau Cordia subcordata COSU2 6742 472 anne Cordyline fruticosa COFR2 6744 6752 Cordyline spp. CORDY2 6745 6745 Corymbia calophylla COCA48 6749 6757 Corymbia citriodora COCI4 6750 6758 Corymbia ficifolia COFI7 6751 6759 Corymbia gummifera COGU4 6752 6760 Corynocarpus laevigatus COLA6 6754 6763 Corynocarpus spp. CORYN2 6755 6755 Couroupita guianensis COGU3 6756 11 Crateva religiosa CRRE12 6758 473 Crescentia alata CRAL11 6760 132 Crossostylis biflora CRBI9 6769 474 Crotalaria longirostrata CRLO3 6771 12 Croton sp. CROTO 6772 croton Cryptocarya elegans CREL8 6779 475 Cryptocarya mannii CRMA8 6781 6790 Cryptocarya oreophila CROR5 6778 6786 Cryptocarya spp. CRYPT2 6783 1310 Cryptocarya turbinata CRTU4 6784 478 Cryptomeria japonica CRJA3 6786 133 Cryptomeria spp. CRYPT4 6787 6787 Cupressus lusitanica CULU2 6795 6795 Cupressus sempervirens CUSE2 6796 6796 Cupressus spp. CUPRE 50 50 Cyanea aculeatiflora CYAC4 6800 6809 Cyanea arborea CYAR10 6801 6810 Cyanea fissa CYFI6 6802 6811 Cyanea floribunda CYFL4 6805 6814 Cyanea giffardii CYGI5 6806 6815 Cyanea hamatiflora CYHA6 6807 6816 Cyanea hardyi CYHA7 6810 6819 Cyanea horrida CYHO6 6811 6820 Cyanea kuhihewa CYKU3 6812 6821 Cyanea kunthiana CYKU 6813 6822 Cyanea leptostegia CYLE5 6814 6823 Cyanea macrostegia CYMA10 6815 6824 Cyanea marksii CYMA14 6818 6827 Cyanea pilosa CYPI4 6819 6828 Cyanea pohaku CYPO5 6822 6831 Cyanea procera CYPR8 6823 6832 Cyanea pycnocarpa CYPY 6824 6833 Cyanea quercifolia CYQU 6825 6834

REE SPECIES LIST BY SCIENTIFIC NAME Cyanea rivularis CYRI4 6826 6835 Cyanea solenocalyx CYSO2 6827 6836 Cyanea spp. CYANE 6828 6828

FSM T

: Cyanea stictophylla CYST5 6829 6837 Cyanea superba CYSU8 6830 6838 Cyanea tritomantha CYTR6 6833 6841 Cyathea cooperi CYCO18 6837 6849 Cyathea decurrens CYDE16 6838 386 Cyathea lunulata CYLU5 6840 691

Section B.5 pg.249 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Cyathea medullaris CYME12 6841 387 Cyathea nigricans CYNI7 6842 836 kattar Cyathea nigricans CYNI7 6842 836 po Cyathea ponapeana CYPO11 6844 837 kattar Cyathea ponapeana CYPO11 6844 837 po Cyathea spp. CYATH 6847 1320 Cyathea spp. CYATH 6847 481 Cyathea truncata CYTR11 6849 482 Cycas circinalis CYCI3 6852 134 Cycas micronesica CYCI3 6852 134 manu atapapo Cycas micronesica CYCI3 6852 134 faltir Cycas micronesica CYCI3 6852 134 frotel Cycas revoluta CYRE11 6853 838 Cycas spp. CYCAS 6854 1330 Cyclophyllum barbatum CYBA7 6855 483 Cynometra ramiflora CYRA8 6858 135 koamoau koamoau koamoau koamoau Cynometra ramiflora CYRA8 6858 135 kahsilah kahsilah kahsilah kahsilah Cynometra yokotae CYYO 6859 eeme Cynometra yokotae CYYO 6859 aapwo Cyphomandra betacea CYBE3 6860 136 Cyrtandra giffardii CYGI3 6865 6878 Cyrtandra pulchella CYPU13 6863 Cyrtandra ramosissima CYRA3 6864 6864 Cyrtandra spp. CYRTA 6866 6866 Dalbergia retusa DARE6 6868 Dalbergia retusa Dalbergia retusa Dalbergia retusa Dalbergia retusa Dalbergia tucurensis DATU 6870 cocobolo cocobolo cocobolo cocobolo Delissea fallax DEFA 6875 6888 Delissea laciniata DELA4 6876 6889 Delissea niihauensis DENI 6877 6890 Delissea parviflora DEPA9 6880 6893 Delissea spp. DELIS 6881 6881 Delissea undulata DEUN2 6882 6894 Delonix regia DERE 6883 485 pilampwoia weitahta Delonix regia DERE 6883 485 sakuranirow Delonix regia DERE 6883 485 simweta Delonix spp. DELON 6884 6884 Dendrocnide harveyi DEHA5 6885 486 Dendrocnide latifolia DELA13 6886 137 leles Dendrocnide latifolia DELA13 6886 137 elat Dendrocnide spp. DENDR1 6887 1340 6 Dictyosperma album DIAL13 6891 138 Dillenia suffruticosa DISU11 6898 6911 Diospyros blancoi DIBL3 6900 6913 Diospyros discolor DIDI9 6902 487 Appendix B: Diospyros ebenum DIEB2 6903 488 Diospyros elliptica DIEL3 6904 489 Diospyros ferrea DIFE5 6905 839 Diospyros hillebrandii DIHI4 6906 6919 Diospyros kaki DIKA2 6907 140 Diospyros samoensis DISA16 6910 491

Diospyros sandwicensis DISA10 6911 6924 TREE SPECIES LIST Diospyros spp. DIOSP 520 1350 Discocalyx ponapensis DIPO 6921 141 kachiel Dodonaea viscosa DOVI 6927 712 Dolichandrone spathacea DOSP3 6928 840 Dovyalis hebecarpa DOHE2 6930 6945 Dracaena multiflora DRMU2 6933 713 Dracaena reflexa DRRE6 6934 song of India song of India song of India song of India Drypetes dolichocarpa DRDO3 6936 Drypetes nitida DRNI3 6941 842 pg.250 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Drypetes spp. DRYPE 6942 1360 Drypetes vitiensis DRVI5 6943 493 Dubautia arborea DUAR 6947 6963 Dubautia demissifolia DUDE 6944 6944 Dubautia fallax DUFA2 6945 6945 Dubautia knudsenii DUKN 6948 6964 Dubautia microcephala DUMI 6952 6968 Dubautia montana DUMO2 6946 6946 Dubautia plantaginea DUPL 6953 6969 Dubautia reticulata DURE2 6957 6973 Dubautia spp. DUBAU 6958 6958 Duranta erecta DUER 6961 6979 Durio zibethinus DUZI 6965 494 durian durian durian durian Dypsis lutescens DYLU 6966 13 areca palm areca palm areca palm Dysoxylum huntii DYHU2 6968 496 Dysoxylum maota DYMA 6969 497 Dysoxylum samoense DYSA 6970 498 Dysoxylum spp. DYSOX 6971 1370 Elaeis guineensis ELGU 6973 843 Elaeocarpus bifidus ELBI 6975 6993 Elaeocarpus carolinensis ELCA20 6976 844 syatak Elaeocarpus floridanus ELFL6 6977 501 Elaeocarpus graeffei ELGR 6978 502 Elaeocarpus grandis ELGR6 6979 503 Elaeocarpus joga ELJO 6980 142 Elaeocarpus kerstingianus ELKE 6981 845 Elaeocarpus kusanoi ELKU 6982 846 maratte Elaeocarpus kusanoi ELKU 6982 846 opop Elaeocarpus spp. ELAEO 6983 1380 Elaeocarpus tonganus ELTO4 6984 705 Elaeocarpus ulianus ELUL 6985 504 Elattostachys falcata ALSA12 6072 406 Elattostachys falcata ELFA3 6990 505 Elattostachys falcata ELFA3 6990 6072 Eleocharis dulcis ELDU3 6992 506 Endiandra elaeocarpa ENEL 6994 507 Enterolobium cyclocarpum ENCY 6996 6996 earpod earpod earpod earpod Eriobotrya japonica ERJA3 6998 329 Eriobotrya spp. ERIOB 6999 6999 Erythrina fusca ERFU2 7008 508 pahr Erythrina sandwicensis ERSA11 7012 7031 Erythrina spp. ERYTH 7013 1390 Erythrina subumbrans ERSU15 7014 509 Erythrina variegata ERVAO 7016 510 coral tree coral tree coral tree coral tree Erythrina variegata ERVAO 7016 510 pahr Erythrina variegata ERVAO 7016 510 parepein Erythrina variegata ERVAO 7016 510 raar Erythrina variegata ERVAO 7016 510 paar Erythrospermum ERAC10 7017 511 acuminatissimum Eucalyptus botryoides EUBO2 7025 7046 Eucalyptus bridgesiana EUBR2 7026 7047 Eucalyptus camaldulensis EUCA2 512 61 REE SPECIES LIST BY SCIENTIFIC NAME Eucalyptus cinerea EUCI80 7028 7048 Eucalyptus cladocalyx EUCL 7030 7050 Eucalyptus cornuta EUCO3 7031 7051

FSM T

: Eucalyptus crebra EUCR 7032 7052 Eucalyptus deanei EUDE 7033 7053 Eucalyptus deglupta EUDE2 7034 339 rainbow gum rainbow gum Eucalyptus deglupta EUDE2 7034 339 Mindanao gum Mindanao gum Eucalyptus globulus EUGL 511 213 Eucalyptus gomphocephala EUGO 7038 7057

Section B.5 pg.251 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Eucalyptus goniocalyx EUGO2 7039 7058 Eucalyptus grandis EUGR12 513 Eucalyptus hemiphloia EUHE12 7041 7059 Eucalyptus marginata EUMA4 7044 7062 Eucalyptus microcorys EUMI 7045 7063 Eucalyptus paniculata EUPA 7046 7064 Eucalyptus pilularis EUPI 7047 340 Eucalyptus raveretiana EURA4 7048 7066 Eucalyptus resinifera EURE2 7049 7067 Eucalyptus robusta EURO2 514 341 Eucalyptus rudis EURU2 7051 7068 Eucalyptus salicifolia EUSA17 7052 7069 Eucalyptus saligna EUSA 7053 342 Eucalyptus sideroxylon EUSI2 7054 343 Eucalyptus spp. EUCAL 510 7055 Eucalyptus tereticornis EUTE 7056 7072 Eucalyptus viminalis EUVI 7057 7073 Eugenia aquea EUAQ 7059 848 Eugenia caryophyllus EUCA16 7065 849 Eugenia javanica EUJA4 7078 144 murop Eugenia javanica EUJA4 7078 144 faliap Eugenia koolauensis EUKO 7079 7098 Eugenia malaccensis EUMA5 7082 145 apel Eugenia malaccensis EUMA5 7082 145 arfath Eugenia malaccensis EUMA5 7082 145 faniap Eugenia nitida EUNI2 7086 850 Eugenia palauensis EUPA3 7087 851 Eugenia palumbis EUPA28 7088 214 Eugenia reinwardtiana EURE7 7091 512 alfanispan Eugenia reinwardtiana EURE7 7091 512 mountain stopper Eugenia spp. EUGEN 7096 1410 Eugenia suzukii EUSU9 7101 852 Eugenia thompsonii EUTH4 7102 147 Eugenia uniflora EUUN2 7104 513 Euodia hortensis EUHO5 7123 854 Euodia nitida EUNI8 7124 855 Euodia palawensis EUPA29 7125 856 Euodia ponapensis EUPO15 7126 857 Euodia spp. EUODI 7127 1420 Euodia trichantha EUTR13 7128 858 Euphorbia haeleeleana EUHA2 7110 7131 Euphorbia neriifolia EUNE4 7112 15 Euphorbia pulcherrima EUPU9 7114 7135 Euphorbia spp. EUPHO 7115 7115 Appendix B: Euphorbia tirucalli EUTI 7116 7136 Euphoria longana EULO7 7117 514 longan longan longan longan Eurya sandwicensis EUSA6 7119 7141 Eurya spp. EURYA 7120 7120 Excoecaria agallocha EXAG 7129 515 ousus Exocarpos gaudichaudii EXGA 7131 7154 Exocarpos spp. EXOCA 7132 7132

Exorrhiza ponapensis EXPO2 7133 859 kotop TREE SPECIES LIST Fagraea berteroana FABE 7141 516 berteroana berteroana berteroana Fagraea berteroana FABE 7141 516 seir Fagraea berteroana FABE 7141 516 seewur peengas Fagraea berteroana FABE 7141 516 peengas Fagraea berteroana FABE 7141 516 mosor Fagraea berteroana FABE 7141 516 sour Fagraea berteroana FABE 7141 516 apet Fagraea ksid FAKS 7142 860 Fagraea spp. FAGRA 7143 1430 pg.252 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Falcataria moluccana FAMO 7144 7166 Falcataria spp. FALCA2 7145 7145 Ficus benjamina FIBE 7150 Ficus carica FICA 7151 149 fig fig fig fig Ficus copiosa FICO2 7152 plentiful fig Ficus elastica FIEL 7155 150 rapah Ficus elastica FIEL 7155 150 gak'iynigoma Ficus godeffroyi FIGO 7156 517 Ficus microcarpa FIMI2 7160 352 Chinese banyan Chinese banyan Ficus microcarpa FIMI2 7160 352 au Ficus nota FINO3 7162 7182 Ficus obliqua FIOB3 7163 518 Ficus prolixa FIPR2 7165 519 aiau Ficus prolixa FIPR2 7165 519 banyan Ficus prolixa FIPR2 7165 519 kohnyah Ficus prolixa FIPR2 7165 519 aw Ficus prolixa FIPR2 7165 519 aaw aaw Ficus prolixa FIPR2 7165 519 hulio Ficus prolixa FIPR2 7165 519 ifaluk Ficus prolixa FIPR2 7165 519 au Ficus prolixa FIPR2 7165 519 kiliau Ficus rubiginosa FIRU4 7167 16 Ficus saffordii FISA 7168 861 Ficus scabra FISC3 7169 520 Ficus spp. FICUS 7171 1440 Ficus thonningii FITH2 7175 7192 Ficus tinctoria FITI2 7176 521 ahwahn Ficus tinctoria FITI2 7176 521 nihn Ficus tinctoria FITI2 7176 521 dyer's fig dyer's fig dyer's fig dyer's fig Ficus tinctoria FITI2 7176 521 srah Ficus tinctoria FITI2 7176 521 shrah Ficus tinctoria FITI2 7176 521 guwan Ficus tinctoria FITI2 7176 521 wach'guy Ficus tinctoria FITI2 7176 521 awen Ficus tinctoria FITI2 7176 521 apwinis Ficus tinctoria FITI2 7176 521 mauk Ficus tinctoria FITI2 7176 521 awan Ficus uniauriculata FIUN 7178 522 Ficus virens FIVI3 7179 215 kilee-ant Ficus virens FIVI3 7179 215 ayau Ficus virens FIVI3 7179 215 aou Ficus virens FIVI3 7179 215 ifaluk Ficus virens FIVI3 7179 215 kiliau Ficus virens FIVI3 7179 215 yaawo yewan Finschia chloroxantha FICH 7180 863 Fitchia speciosa FISP3 7182 7203 Flacourtia rukam FLRU2 7186 216 Flindersia brayleyana FLBR 7188 7208 Flueggea flexuosa FLFL4 7191 524 Flueggea neowawraea FLNE 7192 7212 Flueggea spp. FLUEG 7193 7193 Frangula californica FRCA12 7200 7220 Fraxinus americana FRAM2 541 62

REE SPECIES LIST BY SCIENTIFIC NAME Fraxinus uhdei FRUH 7206 7224 Fuchsia boliviana FUBO 7207 7226 Fuchsia paniculata FUPA2 7208 7227

FSM T

: Fuchsia spp. FUCHS 7209 7209 Funtumia elastica FUEL 7210 525 Garcinia mangostana GAMA10 7214 526 mangosteen mangosteen mangosteen mangosteen Garcinia matsudai GAMA8 7215 864 Garcinia myrtifolia GAMY 7216 527 Garcinia ponapensis GAPO4 7217 865 konpuil

Section B.5 pg.253 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Garcinia rumiyo GARU3 7219 866 Garcinia spp. GARCI 7221 1450 Gardenia brighamii GABR 7224 7243 Gardenia mannii GAMA6 7225 7244 Gardenia remyi GARE 7226 7245 Gardenia spp. GARDE 7227 7227 jasmine grape Gardenia spp. GARDE 7227 7227 kartenia Gardenia taitensis GATA 7228 7246 Garuga floribunda GAFL8 7229 530 Geniostoma rupestre GERU3 7233 531 Gironniera celtidifolia GICE2 7241 532 Gliricidia sepium GLSE2 7245 7243 quick stick quick stick quick stick Gliricidia sepium GLSE2 7245 7243 mother of cocoa mother of cocoa mother of cocoa Gliricidia sepium GLSE2 7245 151 quick stick quick stick quick stick Gliricidia sepium GLSE2 7245 151 mother of cocoa mother of cocoa mother of cocoa Glochidion cuspidatum GLCU 7247 533 Glochidion marianum GLMA9 7248 702 kewikid en lohl Glochidion marianum GLMA9 7248 702 ngumol Glochidion ramiflorum GLRA4 7249 706 Glochidion spp. GLOCH 7250 1460 affor Gmelina elliptica GMEL 7251 869 Gmelina palawensis GMPA 7252 867 Gmelina spp. GMELI 7253 1470 Gnetum gnemon GNGN 7254 868 Goniothalamus carolinensis GOCA2 7260 870 Gossypium barbadense GOBA 7262 7282 Gossypium hirsutum GOHIH2 7264 7283 Grevillea banksii GRBA 7272 7293 Grevillea robusta GRRO 7273 358 Grevillea spp. GREVI 7274 7274 Grewia crenata GRCR4 7275 535 Guaiacum officinale GUOF 7279 152 Guamia mariannae GUMA4 7282 153 Guettarda speciosa GUSP3 7307 536 beach gardenia beach gardenia beach gardenia beach gardenia Guettarda speciosa GUSP3 7307 536 ihd Guettarda speciosa GUSP3 7307 536 eet Guettarda speciosa GUSP3 7307 536 kienglak Guettarda speciosa GUSP3 7307 536 balaaw Guettarda speciosa GUSP3 7307 536 blow Guettarda speciosa GUSP3 7307 536 mosor Guettarda speciosa GUSP3 7307 536 mwoosor Guettarda speciosa GUSP3 7307 536 mwewukkay Guioa rhoifolia GURH 7311 538 Guioa spp. GUIOA 7312 1480

Gulubia palauensis GUPA 7313 871 Appendix B: Gyrocarpus americanus GYAM2 7319 539 Haematoxylum campechianum HACA2 7321 7343 Haplolobus floribundus HAFL 7332 540 Harpullia arborea HAAR4 7334 541 Hedycarya denticulata HEDE14 7338 542 Hedycarya spp. HEDYC2 7340 1490 Hedyotis fosbergii HEFO5 7343 7365 Hedyotis hillebrandii HEHI8 7344 7366 TREE SPECIES LIST Hedyotis spp. HEDYO2 7345 7345 Hedyotis terminalis HETE21 7346 7367 Heliocarpus popayanensis HEPO4 7349 7371 Heliocarpus spp. HELIO 7350 7350 Heritiera littoralis HELI9 7359 544 mwuropw en sed Heritiera littoralis HELI9 7359 544 marapinset Heritiera littoralis HELI9 7359 544 lum Heritiera littoralis HELI9 7359 544 rung pg.254 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Heritiera littoralis HELI9 7359 544 rum Heritiera littoralis HELI9 7359 544 choboch Heritiera littoralis HELI9 7359 544 cheepwech Heritiera littoralis HELI9 7359 544 zwobott Heritiera littoralis HELI9 7359 544 zwobolt Heritiera longipetiolata HELO12 7360 154 Heritiera spp. HERIT2 7362 1500 Hernandia labyrinthica HELA27 7368 Hernandia moerenhoutiana HEMO13 7363 546 Hernandia nymphaeifolia HENY 7364 547 lantern tree lantern tree lantern tree lantern tree Hernandia nymphaeifolia HENY 7364 547 pingaping Hernandia nymphaeifolia HENY 7364 547 pihngpihng Hernandia nymphaeifolia HENY 7364 547 gachal Hernandia nymphaeifolia HENY 7364 547 hochol Hernandia nymphaeifolia HENY 7364 547 gochol Hernandia nymphaeifolia HENY 7364 547 koral Hernandia nymphaeifolia HENY 7364 547 orang Hernandia nymphaeifolia HENY 7364 547 achorong Hernandia nymphaeifolia HENY 7364 547 ekurang Hernandia ovigera HEOV4 7365 155 Hernandia sonora HESO 7366 156 ahkaran Hernandia sonora HESO 7366 156 pingapin Hernandia sonora HESO 7366 156 pung pung Hernandia sonora HESO 7366 156 gachal Hernandia sonora HESO 7366 156 gochol Hernandia sonora HESO 7366 156 koral Hernandia sonora HESO 7366 156 agran Hernandia sonora HESO 7366 156 akurang Hernandia sonora HESO 7366 156 achorong Hernandia spp. HERNA 7367 1510 Hesperomannia arborescens HEAR9 7370 7394 Hesperomannia arbuscula HEAR10 7371 7395 Hesperomannia lydgatei HELY 7372 7396 Hesperomannia spp. HESPE8 7373 7373 Heteromeles arbutifolia HEAR5 7374 7398 Heteromeles spp. HETER5 7376 7376 Heterospathe elata HEEL9 7377 157 guag bbuag Hevea brasiliensis HEBR8 7381 361 Hibiscadelphus bombycinus HIBO2 7384 7408 Hibiscadelphus crucibracteatus HICR 7385 7409 Hibiscadelphus distans HIDI 7386 7410 Hibiscadelphus giffardianus HIGI 7387 7411 Hibiscadelphus hualalaiensis HIHU 7388 7412 Hibiscadelphus puakuahiwi HIPU2 7389 7406 Hibiscadelphus spp. HIBIS 7390 7390 Hibiscadelphus wilderianus HIWI 7391 7413 Hibiscadelphus woodii HIWO 7392 7414 Hibiscus arnottianus HIAR 7393 7417 Hibiscus brackenridgei HIBR 7397 7421 Hibiscus calyphyllus HICA6 7401 7425 Hibiscus clayi HICL 7402 7426 Hibiscus elatus HIEL 7403 7403 Hibiscus kokio HIKO 7404 7428

REE SPECIES LIST BY SCIENTIFIC NAME Hibiscus macrophyllus HIMA5 7407 7431 Hibiscus mutabilis HIMU3 7408 7432 Hibiscus spp. HIBIS2 7411 7411

FSM T

: Hibiscus tiliaceus HITI 7412 548 sea hibiscus sea hibiscus sea hibiscus sea hibiscus Hibiscus tiliaceus HITI 7412 548 kalau Hibiscus tiliaceus HITI 7412 548 hau Hibiscus tiliaceus HITI 7412 548 keleu Hibiscus tiliaceus HITI 7412 548 lo Hibiscus tiliaceus HITI 7412 548 hulifui

Section B.5 pg.255 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Hibiscus tiliaceus HITI 7412 548 gaal Hibiscus tiliaceus HITI 7412 548 gilifa Hibiscus tiliaceus HITI 7412 548 kilifu Hibiscus tiliaceus HITI 7412 548 gilivo Hibiscus tiliaceus HITI 7412 548 kilife Hibiscus tiliaceus HITI 7412 548 sinife Hibiscus tiliaceus HITI 7412 548 sinifo Hibiscus tiliaceus HITI 7412 548 sapwo Hibiscus waimeae HIWA 7413 7436 Homalanthus acuminatus HOAC4 8008 595 Homalanthus nutans HONU3 8009 596 Homalanthus spp. HOMAL6 8010 1680 Homalium whitmeeanum HOWH 7424 549 Horsfieldia amklaal HOAM2 7427 872 Horsfieldia novoguineensis HONO2 7428 873 Horsfieldia nunu HONU2 7429 970 NUNU Horsfieldia palauensis HOPA10 7430 874 Horsfieldia spp. HORSF2 7431 1520 Hylocereus spp. HYLOC 7440 7440 Hylocereus undatus HYUN3 7441 7464 Hymenaea courbaril HYCO 7442 West Indian West Indian West Indian West Indian locust locust locust locust Hymenaea courbaril HYCO 7442 Brazilian cherry Brazilian cherry Brazilian cherry Brazilian cherry Hymenaea courbaril HYCO 7442 stinkingtoe stinkingtoe stinkingtoe stinkingtoe Hypericum canariense HYCA11 7448 7472 Ilex anomala ILAN 7453 7477 Ilex aquifolium ILAQ80 7454 7478 Ilex paraguariensis ILPA3 7460 7483 Ilex spp. ILEX 7464 7464 Inga edulis INED 7472 ice cream bean ice cream bean ice cream bean ice cream bean Inocarpus fagifer INFA3 7475 550 Tahitian Tahitian Tahitian Tahitian chestnut chestnut chestnut chestnut Inocarpus fagifer INFA3 7475 550 mwuropw Inocarpus fagifer INFA3 7475 550 ihi Inocarpus fagifer INFA3 7475 550 marap Inocarpus fagifer INFA3 7475 550 kihrak Inocarpus fagifer INFA3 7475 550 buoy Inocarpus fagifer INFA3 7475 550 bloy Inocarpus fagifer INFA3 7475 550 anilla Inocarpus fagifer INFA3 7475 550 kurrak Intsia bijuga INBI 7477 551 choyo Intsia bijuga INBI 7477 551 show Intsia bijuga INBI 7477 551 ipil-ipil ipil-ipil ipil-ipil ipil-ipil Intsia bijuga INBI 7477 551 ifil Intsia bijuga INBI 7477 551 dort Intsia bijuga INBI 7477 551 thort Appendix B: Intsia bijuga INBI 7477 551 sip Intsia bijuga INBI 7477 551 kuren Intsia bijuga INBI 7477 551 nityanmis Jacaranda mimosifolia JAMI 7482 18 Jacaranda spp. JACAR 7483 7483 Jatropha curcas JACU2 7491 7514

Jatropha spp. JATRO 7494 7494 TREE SPECIES LIST Kayea pacifica KAPA4 7497 875 Kleinhovia hospita KLHO 7506 703 kalau-n-ant Kleinhovia hospita KLHO 7506 703 guest tree guest tree Kleinhovia hospita KLHO 7506 703 monou Kleinhovia hospita KLHO 7506 703 aunenipuin Kokia cookei KOCO2 7509 7529 Kokia drynarioides KODR 7510 7530 Kokia kauaiensis KOKA 7511 7531 Kokia lanceolata KOLA2 7512 7532 pg.256 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Kokia spp. KOKIA 7513 7513 Kunzea ericoides KUER 7516 7537 Kunzea spp. KUNZE 7517 7517 Labordia fagraeoidea LAFA2 7518 7539 Labordia hedyosmifolia LAHE2 7519 7540 Labordia hirtella LAHI5 7520 7541 Labordia kaalae LAKA 7521 7542 Labordia lydgatei LALY2 7522 7543 Labordia spp. LABOR 7523 7523 Labordia tinifolia LATI2 7524 7544 Labordia triflora LATR4 7528 7548 Labordia waiolani LAWA3 7529 7549 Lagerstroemia speciosa LASP 7533 554 Lansium domesticum LADO2 7539 555 Latania loddigesii LALO 7543 158 Leptospermum morrisonii LEMO20 7558 7579 Leptospermum petersonii LEPE23 7559 7580 Leptospermum polygalifolim LEPO22 7560 7581 Leptospermum scoparium LESC2 7561 7582 Leptospermum spp. LEPTO4 7562 7562 Leucaena insularum LEIN31 7564 159 Leucaena leucocephala LELE10 7565 556 tangantangan tangantan tangantangan Leucaena leucocephala LELE10 7565 556 dangandangan Leucaena leucocephala LELE10 7565 556 rohbohtin Leucaena leucocephala LELE10 7565 556 tuhngantuhngan Leucaena leucocephala LELE10 7565 556 ganitnityuwan Leucaena spp. LEUCA 7566 1530 Ligustrum sinense LISI 7575 7598 Ligustrum spp. LIGUS2 7576 7576 Litchi chinensis LICH4 7583 558 lychee lychee lychee lychee Litsea samoensis LISA8 7586 560 Litsea spp. LITSE 7587 1540 Livistona chinensis LICH3 7588 160 Lophostemon confertus LOCO9 7595 7620 Lucuma nervosa LUNE4 7598 561 Lumnitzera littorea LULI8 7602 562 black mangrove black mangrove black mangrove black mangrove Lumnitzera littorea LULI8 7602 562 weingal Lumnitzera littorea LULI8 7602 562 ci Lumnitzera littorea LULI8 7602 562 oi Lumnitzera littorea LULI8 7602 562 yiiy Lumnitzera littorea LULI8 7602 562 wei wei Lumnitzera littorea LULI8 7602 562 achoro Lumnitzera littorea LULI8 7602 562 weey Macadamia integrifolia MAIN8 7614 161 macadamia macadamia macadamia macadamia Macadamia spp. MACAD 7616 1550 Macadamia tetraphylla MATE16 7617 563 Macaranga carolinensis MACA25 7618 876 apwid Macaranga carolinensis MACA25 7618 876 lo lacp Macaranga carolinensis MACA25 7618 876 bith Macaranga carolinensis MACA25 7618 876 biid Macaranga carolinensis MACA25 7618 876 bangbeng Macaranga carolinensis MACA25 7618 876 bidi Macaranga carolinensis MACA25 7618 876 aput

REE SPECIES LIST BY SCIENTIFIC NAME Macaranga carolinensis MACA25 7618 876 tup Macaranga carolinensis MACA25 7618 876 tupwpwunuwén Macaranga carolinensis MACA25 7618 876 kúrúwén

FSM T

: Macaranga grayana MAGR 7619 564 Macaranga harveyana MAHA9 7620 565 Macaranga mappa MAMA28 7621 7646 Macaranga spp. MACAR 7623 1560 Macaranga stipulosa MAST7 7625 568 Macaranga tanarius MATA3 7626 19

Section B.5 pg.257 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Macaranga thompsonii MATH3 7627 162 Mallotus palauensis MAPA6 7638 877 Mallotus philippensis MAPH4 7639 7663 Mallotus spp. MALLO 7641 1570 Mallotus tiliifolius MATI4 7642 878 Mammea glauca MAGL12 7653 570 Mammea odorata MAOD2 7654 163 luas Mammea odorata MAOD2 7654 163 lifos Mammea odorata MAOD2 7654 163 lubodal Mammea odorata MAOD2 7654 163 lifaus Mammea odorata MAOD2 7654 163 nifaus Mammea spp. MAMME 7655 1580 Mangifera indica MAIN3 885 569 mango mango mango mango Mangifera indica MAIN3 885 569 kangit kangit Mangifera indica MAIN3 885 569 kehngid Mangifera indica MAIN3 885 569 macngko Mangifera indica MAIN3 885 569 mangueira Mangifera indica MAIN3 885 569 mahnka Mangifera indica MAIN3 885 569 mahnko, Mangifera minor MAMI3 7657 879 kanit Mangifera odorata MAOD 7658 164 Mangifera spp. MANGI 7659 1590 Manihot carthaginensis subsp. MAGL5 7660 165 Glaziovii Manihot spp. MANIH 7661 7661 Manilkara dissecta MADI14 7664 571 Manilkara hoshinoi MAHO5 7666 880 kohle Manilkara spp. MANIL 7671 1600 Manilkara udoido MAUD 7672 882 Manilkara zapota MAZA 7674 166 Maranthes corymbosa MACO 7679 935 Marattia fraxinea MAFR11 7680 883 Maytenus palauica MAPA28 715 715 Maytenus thompsonii MATH4 7700 Medusanthera carolinensis MECA21 7704 884 Medusanthera samoensis MESA11 7705 575 Medusanthera spp. MEDUS2 7706 1610 Melaleuca quinquenervia MEQU 992 885 Melaleuca spp. MELAL 7709 7709 Melanolepis multiglandulosa MEMU10 7710 167 Melastoma candidum MECA9 7712 7734 Indian Indian Indian Indian rhododendron rhododendron rhododendron rhododendron Melastoma candidum MECA9 7712 7734 Malabar Malabar Malabar Malabar melastome melastome melastome melastome Melastoma sanguineum MESA3 7713 7735 fox-tongued fox-tongued fox-tongued fox-tongued melastoma melastoma melastoma melastoma Appendix B: Melastoma sanguineum MESA3 7713 7735 red melastome red melastome red melastome red melastome Melia azedarach MEAZ 993 993 lelah Melia azedarach MEAZ 993 993 indian lilac Melia azedarach MEAZ 993 993 prais Melia spp. MELIA 7716 7716 Melicope anisata MEAN3 7719 7740 Melicope balloui MEBA2 7720 7741 TREE SPECIES LIST Melicope barbigera MEBA3 7721 7742 Melicope christophersenii MECH2 7722 7743 Melicope cinerea MECI6 7723 7744 Melicope clusiifolia MECL 7724 7745 Melicope cruciata MECR5 7725 7746 Melicope elliptica MEEL2 7726 7747 Melicope haleakalae MEHA7 7727 7748 Melicope haupuensis MEHA3 7728 7749 Melicope hawaiensis MEHA4 7729 7750 pg.258 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Melicope hiiakae MEHI6 7730 7751 Melicope hosakae MEHO2 7731 7752 Melicope kaalaensis MEKA2 7732 7753 Melicope knudsenii MEKN 7733 7754 Melicope latifolia MERE8 7750 577 Melicope macropus MEMA6 7734 7755 Melicope makahae MEMA7 7735 7756 Melicope molokaiensis MEMO6 7736 7757 Melicope mucronulata MEMU4 7737 7758 Melicope oahuensis MEOA 7738 7759 Melicope obovata MEOB4 7739 7760 Melicope orbicularis MEOR4 7740 7761 Melicope ovalis MEOV 7741 7762 Melicope ovata MEOV2 7742 7763 Melicope pallida MEPA6 7743 7764 Melicope paniculata MEPA7 7744 7765 Melicope peduncularis MEPE9 7745 7766 Melicope pseudoanisata MEPS 7746 7767 Melicope puberula MEPU4 7747 7768 Melicope quadrangularis MEQU3 7748 7769 Melicope radiata MERA2 7749 7770 Melicope rotundifolia MERO3 7751 7772 Melicope saint-johnii MESA4 7752 7773 Melicope sandwicensis MESA5 7753 7774 Melicope spp. MELIC3 7754 7754 Melicope volcanica MEVO 7755 7775 Melicope waialealae MEWA2 7756 7776 Melicope wawraeana MEWA4 7757 7777 Melicope zahlbruckneri MEZA 7758 7778 Melicytus samoensis MESA9 7759 578 Melochia aristata MEAR16 7766 580 Melochia spp. MELOC 7767 7767 Melochia umbellata MEUM3 7769 7793 Melochia villosissima var MEVIC4 7770 7770 compacta Melochia villosissima var MEVIV 7771 7771 bede bede villosissima Melochia villosissima var MEVIV 7771 7771 kethoal kethoal villosissima Melochia villosissima var MEVIV 7771 7771 tup tup villosissima Merrilliodendron megacarpum MEME12 7774 168 faniok faniok faniok faniok Meryta macrophylla MEMA16 7776 581 Meryta senfftiana MESE11 7777 886 Meryta spp. MERYT 7778 1620 Metrosideros collina MEPOP2 7781 582 Metrosideros macropus MEMA4 7782 7806 Metrosideros polymorpha MEPO5 7783 7807 Metrosideros polymorpha MEPO5 7783 7784 Metrosideros polymorpha MEPO5 7783 7785 Metrosideros polymorpha MEPO5 7783 7786 Metrosideros polymorpha MEPO5 7783 7787 Metrosideros polymorpha MEPO5 7783 7788

REE SPECIES LIST BY SCIENTIFIC NAME Metrosideros polymorpha MEPO5 7783 7789 Metrosideros polymorpha MEPO5 7783 7790 Metrosideros polymorpha MEPO5 7783 7791

FSM T Metrosideros rugosa MERU2 7792 7816 : Metrosideros spp. METRO 7793 7793 Metrosideros tremuloides METR5 7794 7817 Metrosideros waialealae MEWA 7795 7818 Metroxylon amicarum MEAM4 7798 169 ivory nut palm ivory nut palm ivory nut palm ivory nut palm Metroxylon amicarum MEAM4 7798 169 oahs

Section B.5 pg.259 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Metroxylon amicarum MEAM4 7798 169 abe Metroxylon amicarum MEAM4 7798 169 rupung Metroxylon amicarum MEAM4 7798 169 hibun Metroxylon sagu MESA7 7799 887 sago palm sago palm sago palm sago palm Metroxylon spp. METRO2 7800 1630 Michelia champaca MICH4 7801 583 Miconia calvescens MICA20 7805 7831 Micromelum minutum MIMI23 7824 584 Millettia pinnata MIPI9 7831 585 Mimusops elengi MIEL4 7835 170 Montanoa hibiscifolia MOHI 7841 7870 Montanoa spp. MONTA 7842 7842 Morella cerifera MOCE2 7845 7874 Morella faya MOFA 7846 7875 Morella spp. MOREL2 7848 7848 Morinda citrifolia MOCI3 7849 586 Indian mulberry Indian mulberry Indian mulberry Indian mulberry Morinda citrifolia MOCI3 7849 586 weipwul Morinda citrifolia MOCI3 7849 586 nonu Morinda citrifolia MOCI3 7849 586 nen nen Morinda citrifolia MOCI3 7849 586 i Morinda citrifolia MOCI3 7849 586 ee Morinda citrifolia MOCI3 7849 586 mangalwag Morinda citrifolia MOCI3 7849 586 lol Morinda citrifolia MOCI3 7849 586 arin Morinda citrifolia MOCI3 7849 586 alin Morinda citrifolia MOCI3 7849 586 nopurnen Morinda citrifolia MOCI3 7849 586 nopwur Morinda latibractea MOLA12 7850 888 Morinda pedunculata MOPE2 7851 889 Morinda spp. MORIN 7852 1640 Morinda trimera MOTR 7853 7880 Moringa oleifera MOOL 7855 171 malunggay malunggay malunggay malunggay Morus alba MOAL 681 172 Munroidendron racemosum MURA3 7865 7892 Muntingia calabura MUCA4 7867 173 Muntingia spp. MUNTI 7868 7868 Murraya koenigii MUKO 7870 Musa coccinea MUCO8 7873 890 Musa nana MUNA 7874 891 tama Musa paradisiaca MUPA3 7872 7872 Musa sapientum MUSA 7875 892 tihus Musa spp. MUSA2 7876 1650 wir Musa textilis MUTE6 7877 893 utisel Musa tikap MUTI 7878 894 tikap

Musa troglodytarum MUTR2 7879 895 Appendix B: Mussaenda frondosa MUFR3 7880 896 Mussaenda raiateensis MURA5 7881 588 Mussaenda spp. MUSSA 7882 1660 Myoporum sandwicense MYSA 7883 7910 Myoporum spp. MYOPO 7884 7884 Myrcia spp. MYRCI 7892 7892 Myrciaria cauliflora MYCA9 7894 jaboticaba jaboticaba jaboticaba jaboticaba Myrica rubra MYRU3 7899 174 TREE SPECIES LIST Myrica spp. MYRIC 7900 7900 Myristica hypargyraea MYHY2 7902 590 Myristica insularis MYIN3 7903 897 karara Myristica inutilis MYIN4 7906 7901 Myristica inutilis MYIN4 7906 589 Myristica spp. MYRIS 7904 1670 Myrsine alyxifolia MYAL4 7910 7938 Myrsine degeneri MYDE2 7913 7940 Myrsine emarginata MYEM 7914 7941 pg.260 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Myrsine fernseei MYFE 7915 7942 Myrsine fosbergii MYFO 7916 7943 Myrsine helleri MYHE3 7918 7945 Myrsine kauaiensis MYKA 7919 7946 Myrsine knudsenii MYKN 7920 7947 Myrsine lanaiensis MYLA3 7921 7948 Myrsine lessertiana MYLE2 7922 7949 Myrsine mezii MYME2 7923 7950 Myrsine petiolata MYPE3 7924 7951 Myrsine pukooensis MYPU2 7925 7952 Myrsine sandwicensis MYSA2 7926 7953 Myrsine spp. MYRSI 7927 7927 Myrsine wawraea MYWA 7928 7954 Neisosperma oppositifolia NEOP 7942 591 Neonauclea forsteri NEFO2 7948 592 Nephelium lappaceum NELA7 7952 593 rambutan rambutan rambutan rambutan Nephelium ramboutan-ake NERA3 7953 pulasan pulasan pulasan pulasan Neraudia melastomifolia NEME5 7954 7983 Nesoluma polynesicum NEPO 7958 Nestegis sandwicensis NESA2 7960 7989 Nestegis spp. NESTE 7961 7961 Neuburgia celebica NECE 7962 898 Nicotiana glauca NIGL 7964 7993 Nicotiana spp. NICOT 7965 7965 Nothocestrum breviflorum NOBR2 7966 7995 Nothocestrum latifolium NOLA 7967 7996 Nothocestrum longifolium NOLO 7968 7997 Nothocestrum peltatum NOPE 7969 7998 Nothocestrum spp. NOTHO3 7970 7970 Nototrichium humile NOHU 7971 8001 Nototrichium sandwicense NOSA 7972 8002 Nypa fruticans NYFR2 7974 899 parem Nypa fruticans NYFR2 7974 899 fahsuc Nypa fruticans NYFR2 7974 899 ayeng Nypa fruticans NYFR2 7974 899 aying Nypa fruticans NYFR2 7974 899 ayung Nypa fruticans NYFR2 7974 899 eng Nypa fruticans NYFR2 7974 899 aian Nypa fruticans NYFR2 7974 899 kua Nypa fruticans NYFR2 7974 899 kia Nypa fruticans NYFR2 7974 899 kio Ochna spp. OCHNA 7977 7977 Ochna thomasiana OCTH 7978 8007 Ochroma pyramidale OCPY 7980 900 Ochrosia compta OCCO 7982 8012 Ochrosia haleakalae OCHA 7983 8013 Ochrosia kauaiensis OCKA 7984 8014 Ochrosia kilaueaensis OCKI 7985 8015 Ochrosia mariannensis OCMA2 7987 Ochrosia oppositifolia NEOP 7942 591 kitee kitee Ochrosia oppositifolia NEOP 7942 591 kacshpar Ochrosia oppositifolia NEOP 7942 591 uma uma Ochrosia oppositifolia NEOP 7942 591 umo

REE SPECIES LIST BY SCIENTIFIC NAME Ochrosia oppositifolia NEOP 7942 591 mo Ochrosia spp. OCHRO 7986 7986 2

FSM T

: Olea europaea OLEU 8004 8037 Olea spp. OLEA 8007 8007 Oleandra neriiformis OLNE 8000 Ophiorrhiza palauensis OPPA4 8011 Opuntia cochenillifera OPCO4 8013 8046 Opuntia ficus-indica OPFI 8014 8047

Section B.5 pg.261 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Opuntia monacantha OPMO5 8015 8048 Opuntia spp. OPUNT 8018 8018 Ormosia calavensis ORCA12 8019 901 Osmoxylon oliveri OSOL 8022 716 Osmoxylon pachyphyllum OSPA 8023 717 Osmoxylon spp. OSMOX 8024 1690 Osmoxylon truncatum OSTR 718 718 Pachira aquatica PAAQ2 8036 902 Malabar Malabar Malabar Malabar chestnut chestnut chestnut chestnut Palaquium karrak PAKA 8074 8074 Palaquium stehlinii PAST24 8044 597 Pandanus aimiriikensis PAAI 8054 903 Pandanus cominsii PACO51 8055 905 matal Pandanus cominsii PACO51 8055 905 nifaach Pandanus compressus PACO3 8056 906 paho Pandanus cylindricus PACY10 8057 907 silaue Pandanus cylindricus PACY10 8057 907 sinnau Pandanus dilatatus PADI2 8058 908 kienpel Pandanus divergens PADI29 8059 909 Pandanus dubius PADU3 8060 175 screw pine screw pine screw pine screw pine Pandanus dubius PADU3 8060 175 pakoa Pandanus dubius PADU3 8060 175 kiparenai Pandanus dubius PADU3 8060 175 kienpel Pandanus dubius PADU3 8060 175 poghu poghu poghu Pandanus dubius PADU3 8060 175 meu yok Pandanus dubius PADU3 8060 175 poak Pandanus duriocarpus PADU4 8061 910 Pandanus enchabiensis PAEN 8062 911 Pandanus fischerianus PAFI 8063 912 hara Pandanus fragrans PAFR7 8064 176 pakua Pandanus fragrans PAFR7 8064 176 pogo Pandanus hosinoi PAHO6 8065 913 nenketak Pandanus jaluitensis PAJA3 8066 914 pacheren Pandanus kanehirae PAKA2 8067 915 Pandanus korrensis PAKO2 8068 916 Pandanus lakatwa PALA3 8069 917 Pandanus laticanaliculatus PALA4 8070 918 Pandanus macrocephalus PAMA3 8071 919 intekul, pasyure Pandanus macrojeanneretia PAMA32 8072 920 Pandanus menne PAME18 8073 921 Pandanus obliquus PAOB7 8092 922 Pandanus odontoides PAOD2 8075 923 Pandanus palawensis PAPA38 8076 924 Pandanus patina PAPA39 8077 925 peet Pandanus peliliuensis PAPE 8078 926 Appendix B: Pandanus ponapensis PAPO2 8079 927 alwan Pandanus ponapensis PAPO2 8079 927 kipal Pandanus ponapensis PAPO2 8079 927 taip Pandanus pulposus PAPU18 8080 928 deipw Pandanus pulposus PAPU18 8080 928 jomineia Pandanus rectangulatus PARE2 8081 929 Pandanus reineckei PARE19 8082 598

Pandanus rotundatus PARO2 8083 930 magojokojok TREE SPECIES LIST Pandanus spp. PANDA 8084 1700 Pandanus tectorius PATE2 8085 692 screwpine screwpine screwpine screwpine Pandanus tectorius PATE2 8085 692 deipw deipw Pandanus tectorius PATE2 8085 692 kipar Pandanus tectorius PATE2 8085 692 mweng Pandanus tectorius PATE2 8085 692 me ale Pandanus tectorius PATE2 8085 692 choi Pandanus tectorius PATE2 8085 692 fach fach Pandanus tectorius PATE2 8085 692 far pg.262 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Pandanus tectorius PATE2 8085 692 op Pandanus tolotomensis PATO6 8086 931 kiparenwel Pandanus trukensis PATR 8087 932 Pandanus utilis PAUT 8088 933 lajaperik Pandanus variegatus PAVA4 8090 934 Pangium edule PAED4 8091 178 durien Pangium edule PAED4 8091 178 rowal Parinari insularum PAIN20 8103 601 Parinari laurina PALA5 8104 936 ais ais Parinari laurina PALA5 8104 936 adidi Parinari laurina PALA5 8104 936 gritin Parinari spp. PARIN 8105 1710 Parkia korom PAKO5 8107 8144 Parkia parvifoliola PAPA2 8108 937 Parkinsonia aculeata PAAC3 8111 8149 Parkinsonia spp. PARKI2 8112 8112 Paulownia tomentosa PATO2 712 Peltophorum pterocarpum PEPT3 8121 382 Pemphis acidula PEAC6 8123 602 ngi Pemphis acidula PEAC6 8123 602 hangi Pemphis acidula PEAC6 8123 602 chekis Pericopsis mooniana PEMO13 8129 709 Perrottetia sandwicensis PESA3 8131 8169 Persea americana PEAM3 7211 603 apokado, avocado avocado avocado avocado Persea spp. PERSE 720 8137 Phaleria nisidai PHNI11 8146 Phoenix canariensis PHCA13 8151 20 Phoenix dactylifera PHDA4 8152 179 Phoenix spp. PHOEN2 8153 1720 Phoenix sylvestris PHSY3 8154 180 Photinia davidiana PHDA5 8155 8190 Phyllanthus acidus PHAC3 8157 181 Phyllanthus distichus PHDI10 8159 8194 Pimenta dioica PIDI2 8175 8210 Pimenta racemosa PIRAG 8178 183 Pimenta spp. PIMEN 8180 1730 Pinanga insignis PIIN5 8181 938 Pinus caribaea PICA18 8183 8219 Pinus patula PIPA13 8187 8223 Pinus pinaster PIPI6 8188 8224 Pinus spp. PINUS 100 8189 Pipturus albidus PIAL2 8205 8243 Pipturus argenteus PIAR8 8206 605 ti warenga Pipturus argenteus PIAR8 8206 605 ormuh Pipturus argenteus PIAR8 8206 605 alko Pipturus argenteus PIAR8 8206 605 halkoh Pipturus argenteus PIAR8 8206 605 alamang Pipturus argenteus PIAR8 8206 605 aroma aroma Pipturus argenteus PIAR8 8206 605 guruwel Pipturus argenteus PIAR8 8206 605 tupwpwunuwen Pipturus spp. PIPTU 8207 8207 Piscidia piscipula PIPI3 887 64 REE SPECIES LIST BY SCIENTIFIC NAME Piscidia spp. PISCI 8210 8210 Pisonia brunoniana PIBR3 8212 8249 Pisonia grandis PIGR6 8213 606 puka

FSM T

: Pisonia grandis PIGR6 8213 606 muk Pisonia grandis PIGR6 8213 606 adaburrunigakiy Pisonia grandis PIGR6 8213 606 moek Pisonia grandis PIGR6 8213 606 mwaak Pisonia sandwicensis PISA5 8214 8251 Pisonia spp. PISON 8215 1740

Section B.5 pg.263 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Pisonia umbellifera PIUM2 8217 607 umbrella catchbirdtree Pisonia wagneriana PIWA2 8218 8254 Pithecellobium dulce PIDU 8220 385 Pittosporum argentifolium PIAR4 8226 8265 Pittosporum confertiflorum PICO4 8227 8266 Pittosporum flocculosum PIFL4 8228 8267 Pittosporum gayanum PIGA2 8229 8268 Pittosporum glabrum PIGL4 8230 8269 Pittosporum halophilum PIHA3 8231 8270 Pittosporum hawaiiense PIHA4 8232 8271 Pittosporum hosmeri PIHO 8233 8272 Pittosporum kauaiense PIKA3 8234 8273 Pittosporum monae PIMO4 8224 8224 Pittosporum napaliense PINA 8235 8274 Pittosporum pentandrum PIPE8 8236 8275 Pittosporum spp. PITTO 8238 1750 Pittosporum terminalioides PITE5 8239 8277 Pittosporum undulatum PIUN2 8240 8278 Pittosporum viridiflorum PIVI5 8241 8279 Planchonella garberi PLGA2 8242 610 Planchonella grayana PLGR11 8243 611 Planchonella linggensis PLLI6 8244 612 Planchonella obovata PLOB5 8303 188 laha Planchonella samoensis PLSA9 8246 614 Planchonella spp. PLANC 8247 1760 Planchonella torricellensis PLTO2 8248 615 Platydesma remyi PLRE4 8250 8291 Platydesma spathulata PLSP3 8251 8292 Platydesma spp. PLATY 8252 8252 Pleomele aurea PLAU2 8257 8298 Pleomele auwahiensis PLAU5 8258 8299 Pleomele fernaldii PLFE 8259 8300 Pleomele forbesii PLFO2 8260 8301 Pleomele halapepe PLHA3 8261 8302 Pleomele hawaiiensis PLHA4 8262 8303 Pleomele spp. PLEOM 8263 8263 Plumeria obtusa PLOBO 8269 184 Plumeria rubra PLRU2 8271 185 plumeria plumeria plumeria plumeria Plumeria rubra PLRU2 8271 185 pomeria Plumeria rubra PLRU2 8271 185 haiakai Plumeria rubra PLRU2 8271 185 for Plumeria rubra PLRU2 8271 185 sawur Plumeria rubra PLRU2 8271 185 soulu Plumeria rubra PLRU2 8271 185 seur Appendix B: Plumeria spp. PLUME 8272 1770 Polyscias grandifolia POGR28 8283 701 Polyscias guilfoylei POGU 8284 panax panax panax panax Polyscias guilfoylei POGU 8284 geranium aralia geranium aralia geranium aralia geranium aralia Polyscias guilfoylei POGU 8284 yibung Polyscias macgillivrayi POMA 8285 Polyscias nodosa PONO10 8286 939

Polyscias samoensis POSA27 8287 619 TREE SPECIES LIST Polyscias scutellaria POSC10 8288 21 Polyscias spp. POLYS4 8289 1780 Pometia pinnata POPI12 8290 620 Ponapea hosinoi POHO 8292 940 kattai Ponapea ledermanniana POLE21 8293 941 Ponapea spp. PONAP 8294 1790 Pongamia pinnata POPI4 8295 186 Pouteria caimito POCA43 8297 621 Pouteria calcarea POCA6 8298 942 pg.264 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Pouteria campechiana POCA23 8299 187 Pouteria sandwicensis POSA11 8304 8341 Pouteria sapota POSA13 8305 189 Pouteria spp. POUTE 8306 1800 Premna obtusifolia PROB 8307 190 varovaro Premna obtusifolia PROB 8307 190 sobuk Premna obtusifolia PROB 8307 190 orr Premna obtusifolia PROB 8307 190 fienkack Premna obtusifolia PROB 8307 190 false elder false elder false elder Premna obtusifolia PROB 8307 190 yar Premna obtusifolia PROB 8307 190 arr Premna obtusifolia PROB 8307 190 aro yar Premna obtusifolia PROB 8307 190 umukau Premna obtusifolia PROB 8307 190 nior Premna obtusifolia PROB 8307 190 lior Premna pubescens PRPU5 8308 943 Premna serratifolia PRSE6 8309 622 topwuk Premna serratifolia PRSE6 8309 622 fienkack Premna serratifolia PRSE6 8309 622 ar wumwukaw Premna serratifolia PRSE6 8309 622 niyoor Premna spp. PREMN 8310 1810 umukau Pritchardia affinis PRAF 8315 8352 Pritchardia arecina PRAR2 8316 8353 Pritchardia beccariana PRBE 8317 8354 Pritchardia forbesiana PRFO 8318 8318 Pritchardia hardyi PRHA2 8319 8319 Pritchardia hillebrandii PRHI 8320 8357 Pritchardia kaalae PRKA 8321 8358 Pritchardia lanaiensis PRLA3 8322 8322 Pritchardia lanigera PRLA4 8323 8359 Pritchardia limahuliensis PRLI2 8324 8360 Pritchardia lowreyana PRLO2 8325 8361 Pritchardia martii PRMA5 8326 8362 Pritchardia minor PRMI3 8327 8363 Pritchardia munroi PRMU3 8328 8364 Pritchardia pacifica PRPA11 8329 623 Pritchardia perlmanii PRPE7 8330 8366 Pritchardia remota PRRE 8331 8367 Pritchardia schattaueri PRSC 8336 8372 Pritchardia spp. PRITC 8337 8337 Pritchardia viscosa PRVI2 8338 8338 Pritchardia waialealeana PRWA 8339 8374 Procris pedunculata PRPE6 8341 8341 Prosopis juliflora PRJU 8343 8382 Prosopis pallida PRPA4 8344 8383 Prosopis spp. PROSO 755 8345 Prunus persica PRPE3 764 191 Psidium cattleianum PSCA 8355 8393 Psidium guajava PSGU 8356 624 guava guava guava guava Psidium guajava PSGU 8356 624 guahva Psidium guajava PSGU 8356 624 kuahpa Psidium guajava PSGU 8356 624 kuhfahfah Psidium guajava PSGU 8356 624 abas

REE SPECIES LIST BY SCIENTIFIC NAME Psidium guajava PSGU 8356 624 kuafa Psychotria carolinensis PSCA18 8368 chimei Psychotria fauriei PSFA 8365 8402

FSM T

: Psychotria grandiflora PSGR 8366 8403 Psychotria greenwelliae PSGR3 8369 8406 Psychotria hathewayi PSHA2 8370 8407 Psychotria hawaiiensis PSHA3 8373 8410 Psychotria hexandra PSHE2 8377 8414

Section B.5 pg.265 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Psychotria hexandra ssp. PSHEO 8382 8419 oahuensis Psychotria hobdyi PSHO 8386 8423 Psychotria insularum PSIN10 8387 626 Psychotria kaduana PSKA 8388 8425 Psychotria mariana PSYMA 8390 192 aplokating R Psychotria mariniana PSMA6 8392 8429 Psychotria mauiensis PSMA7 8393 8430 Psychotria rhombocarpa PSRH2 8398 971 Psychotria rotensis PSRO2 8399 193 Psychotria spp. PSYCH 8400 1820 Psychotria wawrae PSWA2 8401 8437 Psydrax merrillii CAME35 6381 447 Psydrax odorata PSOD 8402 627 alahee alahee alahee alahee Pteralyxia kauaiensis PTKA 8404 8445 Pteralyxia macrocarpa PTMA 8405 8446 Pteralyxia spp. PTERA 8406 8406 Pterocarpus indicus PTIN2 8407 194 Ptychococcus ledermannianus PTLE3 8412 973 Ptychosperma macarthuri PTMA8 8415 22 Macarthur palm Macarthur palm Macarthur palm Macarthur palm Ptychosperma palauense PTPA 8416 945 Ptychosperma spp. PTYCH4 8418 1830 Quercus spp. QUERC 800 800 Quercus suber QUSU5 8424 8464 Rapanea myricifolia RAMY 8430 628 Rauvolfia insularis RAIN8 8432 946 Rauvolfia sandwicensis RASA3 8434 8475 Rauvolfia spp. RAUVO 8435 8435 Rauvolfia vomitoria RAVO 8431 Ravenala madagascariensis RAMA7 8436 947 Reynoldsia lanutoensis RELA 8440 629 Reynoldsia sandwicensis RESA 8442 8483 Reynoldsia spp. REYNO 8443 1840 Rheedia edulis RHED4 8456 631 Rhizophora apiculata RHAP2 8458 195 aak Rhizophora apiculata RHAP2 8458 195 akapa Rhizophora apiculata RHAP2 8458 195 suhkasrihk Rhizophora apiculata RHAP2 8458 195 malil Rhizophora apiculata RHAP2 8458 195 chiaan iimw Rhizophora lamarckii RHLA12 8460 720 Rhizophora mangle RHMA2 989 632 Rhizophora mucronata RHMU 8462 196 akelel Rhizophora mucronata RHMU 8462 196 kahrahk Rhizophora mucronata RHMU 8462 196 chia chia Rhizophora mucronata RHMU 8462 196 roway Appendix B: Rhizophora mucronata RHMU 8462 196 chiaan uumw Rhizophora spp. RHIZO 8463 1850 Rhizophora stylosa RHST8 8464 633 Rhodomyrtus spp. RHODO 8465 8465 2 Rhodomyrtus tomentosa RHTO10 8466 8505 rose myrtle rose myrtle rose myrtle rose myrtle

Rhus sandwicensis RHSA2 8467 8507 TREE SPECIES LIST Rhus spp. RHUS 8468 8468 Rhus taitensis RHTA 8469 634 sumac sumac sumac sumac Rhus taitensis RHTA 8469 634 galad Ricinus communis RICO3 8472 8512 Ricinus spp. RICIN 8473 8473 Rinorea carolinensis RICA16 8474 948 kinisom Rollinia deliciosa RODE5 8480 635 Roystonea oleracea ROOL 8491 949 Roystonea regia ROEL 8490 197 pg.266 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Samadera indica SAIN13 8503 950 Samanea spp. SAMAN 8506 8506 Sambucus nigra SANIC4 8509 8547 Sambucus spp. SAMBU 8510 8510 Sandoricum koetjape SAKO4 8515 637 Santalum album SAAL16 8518 sandalwood sandalwood sandalwood sandalwood Santalum ellipticum SAEL2 8516 8556 Santalum freycinetianum SAFR4 8517 8557 Santalum haleakalae SAHA3 8521 8561 Santalum paniculatum SAPA7 8522 8562 Santalum salicifolium SASA8 8525 8554 Santalum spp. SANTA 8526 8526 Sapindus oahuense SAOA3 8528 8568 Sapindus saponaria SASA4 8529 8569 Sapindus spp. SAPIN 8531 8531 Sapindus vitiensis SAVI17 8532 639 Sapium indicum SAIN2 8534 951 Sarcopygme pacifica SAPA35 8544 640 Scaevola cerasifolia SCCE3 8548 8548 Scaevola chamissoniana SCCH3 8549 8588 Scaevola gaudichaudiana SCGA2 8550 8589 Scaevola procera SCPR 8551 8590 Scaevola spp. SCAEV 8552 8552 Scaevola taccada SCTA 8560 641 remek Scaevola taccada SCTA 8560 641 kusrohsr Scaevola taccada SCTA 8560 641 nut Scaevola taccada SCTA 8560 641 noth Scaevola taccada SCTA 8560 641 thoth Scaevola taccada SCTA 8560 641 luth Scaevola taccada SCTA 8560 641 lath Scaevola taccada SCTA 8560 641 natu Scaevola taccada SCTA 8560 641 remag Scaevola taccada SCTA 8560 641 lat Scaevola taccada SCTA 8560 641 not Scaevola taccada SCTA 8560 641 nnét Scaevola taccada SCTA 8560 641 neet Schaefferia spp. SCHAE 8555 8555 Schefflera actinophylla SCAC2 888 198 Schefflera samoensis SCSA10 8559 642 Schinus molle SCMO 8561 8601 Schinus terebinthifolius SCTE 8563 224 Schinus terebinthifolius SCTE 8563 8564 Schleinitzia fosbergii SCFO2 7564 Scyphiphora hydrophyllacea SCHY5 8577 952 Securinega flexuosa SEFL9 8583 644 Semecarpus kraemeri SEKR3 8585 poison tree Semecarpus kraemeri SEKR3 8585 panew Semecarpus venenosa SEVE4 8586 953 Senna alata SEAL4 8588 8628 tuhken kilinwai Senna alata SEAL4 8588 8628 truk-en-kili-n-wai Senna alata SEAL4 8588 8628 geking sepan Senna alata SEAL4 8588 8628 flay n sabouw Senna alata SEAL4 8588 8628 arakak

REE SPECIES LIST BY SCIENTIFIC NAME Senna alata SEAL4 8588 8628 salai Senna alata SEAL4 8588 8628 yarakaak Senna gaudichaudii SEGA2 8590 8630

FSM T

: Senna multijuga SEMU5 8591 8631 Senna pendula SEPE4 8592 8632 Senna septemtrionalis SESE13 8595 8635 Senna siamea SESI3 8596 6420 Pheasant wood Senna siamea SESI3 8596 6420 Siamese cassia Senna spp. SENNA 8598 8598

Section B.5 pg.267 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Senna sulfurea SESU10 8599 8638 Senna surattensis SESU4 8600 8639 Serianthes kanehirae SEKA2 8601 954 ukall Serianthes nelsonii SENE9 8603 199 Sesbania grandiflora SEGR5 8605 647 Sesbania sesban SESE8 8606 8647 Sesbania spp. SESBA 8607 8607 Shirakiopsis indica SHIN 8608 8608 Sida fallax SIFA 8609 23 Sida spp. SIDA 8610 8610 Solanum americanum SOAM 8628 648 Solanum mauritianum SOMA3 8631 8671 Solanum spp. SOLAN 8635 8635 Solanum torvum SOTO4 8636 8673 Sonneratia alba SOAL10 8639 200 kwat Sonneratia alba SOAL10 8639 200 kotoh Sonneratia alba SOAL10 8639 200 koatoa Sonneratia alba SOAL10 8639 200 fuliohfohl Sonneratia alba SOAL10 8639 200 abruk Sonneratia alba SOAL10 8639 200 abrur Sonneratia alba SOAL10 8639 200 sales Sonneratia alba SOAL10 8639 200 saras Sophora chrysophylla SOCH 8641 8680 Sophora spp. SOPHO 8642 8642 Sophora tomentosa SOTO3 8643 649 hakapini Sophora tomentosa SOTO3 8643 649 rakau haiko Sophora tomentosa SOTO3 8643 649 ti rakauhaiko Soulamea amara SOAM2 8660 maras Spathodea campanulata SPCA2 8644 650 Spathodea spp. SPATH 8645 8645 Spiraeanthemum samoense SPSA7 8646 651 Spondias dulcis SPDU3 8649 652 mon Spondias mombin SPMO 8650 955 Spondias pinnata SPPI4 8656 956 Spondias spp. SPOND 8653 1860 Stemonurus ammui STAM10 8655 957 Sterculia fanaiho STFA5 8665 653 Sterculia palauensis STPA20 8667 958 Streblus anthropophagorum STAN9 8669 654 Streblus pendulinus STPE3 8670 201 Streblus spp. STREB 8671 8671 Suriana maritima SUMA2 8676 24 Swietenia macrophylla SWMA 8679 655 broad leaf broad leaf broad leaf broad leaf mahogany mahogany mahogany mahogany Swietenia mahagoni SWMA2 940 959 West Indies West Indies West Indies Appendix B: mahogany mahogany mahogany Swietenia mahagoni SWMA2 940 959 moakumi Swietenia spp. SWIET 8678 1870 Symplocos racemosa SYRA6 8687 722 Syncarpia glomulifera SYGL 8689 8729 Syncarpia spp. SYNCA 8690 8690 Synsepalum dulcificum SYDU 8691 656

Syzygium aqueum SYAQ 8694 TREE SPECIES LIST Syzygium brevifolium SYBR3 8695 658 Syzygium carolinense SYCA4 8696 659 kehnpap kehnpap kehnpap kehnpap Syzygium clusiifolium SYCL 8697 660 Syzygium cumini SYCU 896 143 Syzygium cumini SYCU 896 65 Syzygium dealatum SYDE3 8699 661 Syzygium inophylloides SYIN2 8700 662 Syzygium jambos SYJA 8701 663 Syzygium malaccense SYMA2 8702 25 apel pg.268 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Syzygium malaccense SYMA2 8702 25 apel en Pohnpei Syzygium malaccense SYMA2 8702 25 acpuhl Syzygium malaccense SYMA2 8702 25 arfath Syzygium malaccense SYMA2 8702 25 faariyap Syzygium malaccense SYMA2 8702 25 mountain apple mountain apple mountain apple mountain apple Syzygium richii SYRI3 8703 664 Syzygium samarangense SYSA3 8704 665 Syzygium samoense SYSA6 8705 666 Syzygium sandwicense SYSA 8706 8745 Syzygium spp. SYZYG 8708 8708 Syzygium stelechanthum SYST3 7099 146 kirekinwel Syzygium stelechanthum SYST3 7099 146 kahkarak Syzygium stelechanthum SYST3 7099 146 attieu Tabebuia heterophylla TAHE 8713 Tabebuia pallida TAPA10 8714 202 Tabebuia rosea TARO 8716 Tabebuia spp. TABEB 8718 8488 Tabernaemontana aurantiaca TAAU3 8719 960 Tabernaemontana pandacaqui TAPA13 8722 668 Tabernaemontana rotensis TARO3 8723 210 Tamarindus indica TAIN2 897 203 tamarind tamarind tamarind tamarind Tarenna sambucina TASA2 8737 669 Tecoma castanifolia TECA9 8741 8782 Tecoma stans TEST 8743 961 Tectona grandis TEGR 8744 962 teak teak teak teak Tectona grandis TEGR 8744 962 tuhkehn wai Tectona grandis TEGR 8744 962 tik Tectona spp. TECTO 8745 8745 Terminalia carolinensis TECA16 8749 963 kehma Terminalia carolinensis TECA16 8749 963 Ka Terminalia catappa TECA 8750 670 tropical almond tropical almond tropical almond tropical almond Terminalia catappa TECA 8750 670 dipwoapw Terminalia catappa TECA 8750 670 kekapin Terminalia catappa TECA 8750 670 sarf Terminalia catappa TECA 8750 670 srifaf Terminalia catappa TECA 8750 670 srihfacf Terminalia catappa TECA 8750 670 kel Terminalia catappa TECA 8750 670 gil Terminalia catappa TECA 8750 670 as Terminalia catappa TECA 8750 670 asas Terminalia crassipes TECR3 8751 964 Terminalia edulis TEED 8752 965 Terminalia kaernbachii TEKA4 8755 966 Terminalia litoralis TELI7 8753 strand tree Terminalia litoralis TELI7 8753 sin Terminalia myriocarpa TEMY 8756 8797 Terminalia richii TERI3 8758 673 Terminalia samoensis TESA2 8759 674 Samoan tropical Samoan tropical Samoan tropical Samoan tropical almond almond almond almond Terminalia samoensis TESA2 8759 674 pua rakau Terminalia samoensis TESA2 8759 674 ken Terminalia samoensis TESA2 8759 674 win Terminalia samoensis TESA2 8759 674 kil REE SPECIES LIST BY SCIENTIFIC NAME Terminalia samoensis TESA2 8759 674 kin Terminalia samoensis TESA2 8759 674 kon Terminalia samoensis TESA2 8759 674 sin

FSM T

: Terminalia spp. TERMI 8748 1880 Tetraplasandra flynnii TEFL5 8770 8813 Tetraplasandra gymnocarpa TEGY 8771 8814 Tetraplasandra hawaiensis TEHA2 8772 8815 Tetraplasandra kavaiensis TEKA3 8773 8816 Tetraplasandra oahuensis TEOA 8774 8817

Section B.5 pg.269 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Tetraplasandra spp. TETRA1 8775 8775 1 Tetraplasandra waialealae TEWA 8776 8818 Tetraplasandra waimeae TEWA3 8777 8819 Tetrazygia bicolor TEBI 8779 8823 Theobroma cacao THCA 8784 675 cacao cacao cacao cacao Theobroma cacao THCA 8784 675 cocoa cocoa cocoa cocoa Thespesia populnea THPO3 8787 676 Pacific Pacific Pacific Pacific rosewood rosewood rosewood rosewood Thespesia populnea THPO3 8787 676 pone Thespesia populnea THPO3 8787 676 miro Thespesia populnea THPO3 8787 676 panu Thespesia populnea THPO3 8787 676 pakeena Thespesia populnea THPO3 8787 676 bangbeng Thespesia populnea THPO3 8787 676 pene Thespesia spp. THESP 8788 8788 Thevetia peruviana THPE3 8789 8834 Tibouchina spp. TIBOU 8804 8804 Tibouchina urvilleana TIUR 8805 8846 Timonius corymbosus TICO7 8806 723 Timonius mollis TIMO4 8807 724 Timonius spp. TIMON 8808 1890 Timonius subauritus TISU3 8809 726 Timonius timon TITI 8810 727 Toona ciliata TOCI 8812 8851 Toona spp. TOONA 8811 8815 Touchardia latifolia TOLA 8822 8862 Touchardia spp. TOUCH 8823 8823 Tournefortia argentea TOAR2 8824 678 beach beach beach beach heliotrope heliotrope heliotrope heliotrope Tournefortia argentea TOAR2 8824 678 titin Tournefortia argentea TOAR2 8824 678 sisin Tournefortia argentea TOAR2 8824 678 amunusut Tournefortia argentea TOAR2 8824 678 srahl Tournefortia argentea TOAR2 8824 678 sruhsruh Tournefortia argentea TOAR2 8824 678 sasran Tournefortia argentea TOAR2 8824 678 chen Tournefortia argentea TOAR2 8824 678 chel Tournefortia argentea TOAR2 8824 678 amoloset Tournefortia argentea TOAR2 8824 678 amonoset Tournefortia argentea TOAR2 8824 678 chen Tournefortia argentea TOAR2 8824 678 neet Tournefortia spp. TOURN 8826 8826 Tree conifer 2TE 299 299 unknown dead unknown dead unknown dead unknown dead conifer conifer conifer conifer

Tree hardwood 2TB 998 998 unknown dead unknown dead unknown dead unknown dead Appendix B: hardwood hardwood hardwood hardwood Tree unknown 2TREE 999 999 unknown live unknown live unknown live unknown live tree tree tree tree Tree unknown 2TREE 999 9000 Tree unknown 2TREE 999 9001 Tree unknown 2TREE 999 9002 Tree unknown 2TREE 999 9003 Tree unknown 2TREE 999 9004 TREE SPECIES LIST Tree unknown 2TREE 999 9005 Tree unknown 2TREE 999 9006 Tree unknown 2TREE 999 9007 Tree unknown 2TREE 999 9008 Tree unknown 2TREE 999 9009 Tree unknown 2TREE 999 9010 Tree unknown 2TREE 999 9011 Tree unknown 2TREE 999 9012 Tree unknown 2TREE 999 9013 pg.270 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Tree unknown 2TREE 999 9014 Tree unknown 2TREE 999 9020 Tree unknown 2TREE 999 9030 Tree unknown 2TREE 999 9999 Tree unknown 2TREE 999 9015 Trema cannabina TRCA33 8827 679 Trema orientalis TROR 8831 204 Trema spp. TREMA 8832 1900 Triadica sebifera TRSE6 994 Trichospermum ikutai TRIK 8837 967 Trichospermum ledermannii TRLE8 8838 968 Trichospermum richii TRRI9 8839 680 Triphasia trifolia TRTR7 8842 123 Tristiropsis obtusangula TROB7 8846 205 Ulmus pumila ULPU 974 Urera glabra URGL 8856 8897 Urera kaalae URKA 8857 8898 Urera spp. URERA 8858 8858 Vernicia montana VEMO3 8869 8909 Vernicia spp. VERNI 8870 8870 Vitex cofassus VICO17 8872 969 Vitex cofassus VICO17 8872 8911 Vitex parviflora VIPA6 8874 206 Vitex spp. VITEX 8875 1910 Vitex trifolia VITR7 8876 8914 simpleleaf simpleleaf simpleleaf simpleleaf chastetree chastetree chastetree chastetree Vitex trifolia VITR7 8876 8914 kasik Vitex trifolia VITR7 8876 8914 gillieu Vitex trifolia VITR7 8876 8914 mengit Wedelia biflora WEBI 8884 683 Weinmannia affinis WEAF 8886 684 Wikstroemia bicornuta WIBI 8889 8928 Wikstroemia furcata WIFU 8890 8929 Wikstroemia monticola WIMO 8891 8930 Wikstroemia oahuensis WIOA 8892 8931 Wikstroemia oahuensis WIOA 8892 8893 Wikstroemia phillyreifolia WIPH2 8895 8934 Wikstroemia pulcherrima WIPU 8896 8935 Wikstroemia sandwicensis WISA 8897 8936 Wikstroemia skottsbergiana WISK 8898 8937 Wikstroemia spp. WIKST 8899 8899 Wikstroemia villosa WIVI 8900 8938 Ximenia americana XIAM 8901 207 Xylocarpus granatum XYGR 8903 685 brok Xylocarpus granatum XYGR 8903 685 pwulok Xylocarpus granatum XYGR 8903 685 ploek brok Xylocarpus granatum XYGR 8903 685 tuhi Xylocarpus granatum XYGR 8903 685 yamgur Xylocarpus granatum XYGR 8903 685 punopun Xylocarpus granatum XYGR 8903 685 puzzle nut puzzle nut puzzle nut puzzle nut Xylocarpus moluccensis XYMO2 8904 686 pwulok Xylocarpus moluccensis XYMO2 8904 686 tuhi Xylocarpus moluccensis XYMO2 8904 686 abrur REE SPECIES LIST BY SCIENTIFIC NAME Xylocarpus moluccensis XYMO2 8904 686 punopun Xylocarpus spp. XYLOC2 8905 1920 Xylosma crenata XYCR 8907 8947

FSM T

:

Section B.5 pg.271 Scientific NRCS New NIMSOld NIMS Pohnpei Kosrae Yap Chuuk Xylosma hawaiiensis XYHA 8908 8948 Xylosma nelsonii XYNE2 8909 208 Xylosma samoensis XYSA 8911 688 Xylosma spp. XYLOS 8915 8915 Zanthoxylum dipetalum ZADI 8925 8967 Zanthoxylum hawaiiense ZAHA 8929 8971 Zanthoxylum kauaense ZAKA 8930 8972 Zanthoxylum oahuense ZAOA 8933 8975 Zanthoxylum spp. ZANTH 8936 8936 Ziziphus mauritiana ZIMA 8939 209 Appendix B: TREE SPECIES LIST pg.272 : pg.273 APPENDIX C TREE CODING GUIDE Previous Measurement Present Measurement PREVIOUS PRESENT RECONCILE STANDING CAUSE OF TREE TREE DEAD DEATH STATUS STATUS SAMPLE KIND 1 or 3

Live 1.0+DBH 1 Standing dead 1.0+ DBH 2 Null - Office Core inserts code optional 1 SAMPLE KIND 2(Remeasurement)

Live 5.0+ DBH Live 5.0+ DBH 1 1 Live 1.0-4.9 DBH on Live 5.0+ DBH Note: this 1 1 microplot live tally tree should be referenced with a new distance and azimuth from the subplot center. Live 1.0-4.9 DBH on Live 1.0-4.9 DBH on 1 1 microplot microplot Live 5.0+ DBH Live but shrank < 5.0 and 1 1 on microplot. Note: this live sapling should be referenced with a new distance and azimuth from the microplot center. Live 1.0+ Live but land no longer 1 1 qualifies as forest Live 1.0+ DBH Standing dead 5.0+ DBH 1 2 1 10-80 Live 5.0+ DBH Down dead 5.0+ 1 2 0 10-80 Live 1.0-4.9 DBH on Dead 5.0+ DBH (standing or 1 2 0 or 1 10-80 microplot down). Note: if standing, this dead tally tree should be referenced with a new distance and azimuth from the subplot center. Live 1.0+ DBH Cruiser unable to locate 1 2 0 30 or 50-55 tree due to a weather geologic event (such as landslide) or fire event & assume tree is down dead or you can see tree and it is dead and off the plot Live 1.0+ DBH Cut and left in the woods 1 2 0 80 Appendix C: Live 1.0+ DBH Dead (standing or down) 1 2 0 or 1 10-80 and land no longer qualifies as forest (land clearing or conversion to nonforest land use) Dead 5 inch + Dead and land no longer 2 2 0 or 1 qualifies as forest (land TREE CODING GUIDE clearing or conversion to nonforest land use) Live 1.0+ DBH Tree removed (cut and 1 3 80 hauled away) Live 1.0+ DBH Gone (cut and removed) 1 3 80 and land no longer qualifies as forest Dead 5.0+ DBH Dead standing 5.0 DBH 2 2 1 Dead 5.0+ DBH Dead down 5.0+ DBH 2 2 0 pg.274 Previous Measurement Present Measurement PREVIOUS PRESENT RECONCILE STANDING CAUSE OF TREE TREE DEAD DEATH STATUS STATUS Dead 5.0+ DBH Cruiser is unable to locate 2 2 0 tree due to a weather geologic (such as landslide) or fire event & assume it is down dead or you can see tree and it is dead and off the plot Dead 5.0+ DBH Tree removed (cut and 2 3 hauled away) Dead 5.0+ DBH Tree shrank <5.0 but ≥ 1.0 2 2 0 (e.g. bark loss) and is standing dead, located on subplot (not located on microplot) Dead 5.0+ DBH Tree shrank <5.0 but ≥ 1.0 2 2 1 (e.g. bark loss) and is standing dead, located on microplot. Note: this dead sapling should be referenced with a new distance and azimuth from the microplot center Live 5.0+ DBH Tree shrank <5.0 and live, 1 0 5 NOT on microplot Live 5.0+ DBH Tree shrank <5.0 but ≥ 1.0 1 2 0 10-80 (e.g., bark loss) and is standing dead, located on subplot (not located on microplot) Live 5.0+ DBH Tree shrank <5.0 but ≥ 1.0 1 2 1 10-80 (e.g. bark loss) and is standing dead, located on microplot. Note: this dead sapling should be referenced with a new distance and azimuth from the microplot center Live 1.0-4.9 DBH Tree shrank <1.0 and live 1 0 5 Live 1.0-4.9 DBH Tree shrank <1.0 and dead 1 2 0 10-80 Live 1.0-4.9 DBH Live 1.0-4.9 DBH, 1 0 7 shouldn’t have been tallied—beyond 6.8— cruiser error Live 5.0+ DBH Live 5.0+ DBH, shouldn’t 1 0 7 have been tallied –beyond 24.0–cruiser error Live 1.0+ DBH No longer a tally species 1 0 8 Live 1.0+ DBH Tree moved off plot/ 1 0 6 microplot due to a geologic (i.e., slight earth movement) or weather event (i.e., hurricane) and you can still see it (live before, live now) Live 1.0+ DBH Nonsampled area now 1 0 9 Dead 5.0+ DBH No longer a tally species 2 0 8

: pg.275 Previous Measurement Present Measurement PREVIOUS PRESENT RECONCILE STANDING CAUSE OF TREE TREE DEAD DEATH STATUS STATUS Dead 5.0 DBH Tree moved off plot due to 2 0 6 a geologic (i.e., small earth movement) or weather event (i.e., hurricane) and you can still see the tree Dead 5 inch + Nonsampled area now 2 0 9 Missed live Live 1.0+ DBH - 1 3 < 5.0 liveDBH 5.0+ DBH live (not on the - 1 1 microplot) < 1.0 liveDBH 1.0-4.9 DBH live (on the - 1 1 microplot) < 1.0 liveDBH Standing dead 1.0-4.9 on 2 1 1 10-80 microplot DBH < 1.0 liveDBH 5.0+ DBH live (on the - 1 2 microplot) (through growth) Nonsampled area before Live 1 inch DBH - 1 3 Nonsampled area before Live 1.0”+ 1 1 and tree is <1.0” Nonforest before Forest now, live 1 inch+ - 1 1 DBH Missed dead Dead 1.0+ DBH - 2 4 1 Missed live Dead 1.0+ DBH - 2 3 1 10-80 < 5.0 live DBH 5.0+ DBH dead (standing, - 2 1 0 or 1 10-80 not on the microplot) < 5.0 live DBH 5.0+ DBH dead (standing 1 2 0 or 1 10-80 or down, on the microplot) Nonsampled area before Standing Dead 1.0 + DBH - 2 3 or 4 10-80 Nonforest before Forest now, Standing - 2 1 10-80 Dead 1.0 + DBH Live 5.0+ DBH Dead <5.0 inch DBH 1 2 0 10-80 Reference only (Witness Tree is no longer used for 90 only) any reason Live 1.0 inch + Tree diameter was 10 7 erroneously measured on a swell or damage, and now the nail must be moved to the correct location, and tree is not big

enough to qualify as tally at Appendix C: the new location Live 1.0 inch + Tree diameter was -1 1 erroneously measured on a swell or damage, and now the nail must be moved to the correct

location (If the tree is now TREE CODING GUIDE large enough to be tallied a new tree line should be created and reconciled as ingrowth) No Status Tree moved onto plot due - 1 or 2 1 to a geologic (i.e., small earth movement) or weather event (i.e., hurricane) pg.276 : pg.277 APPENDIX D DAMAGE CODES

SECTION D.1 DAMAGE CODES The REGION column means that only the region(s) listed are allowed to collect the specific code, and must do so when the damage is present and meets or exceeds the required threshold. CODE Common Name Scientific Name Threshold REGION 0 No Damage ALL 10000 General Insects Any damage to the terminal leader; damage ≥ ALL 20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; >20% of the branches affected; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 10016 coconut rhinoceros beetle Oryctes rhinoceros Any damage to the terminal leader; damage ≥ PNW 20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; >20% of the branches affected; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 11000 Bark Beetles Any evidence of a successful attack ALL (successful attacks generally exhibit boring dust, many pitch tubes and/or fading crowns) 12000 Defoliators Any damage to the terminal leader; damage ≥ ALL 20% of the foliage with ≥ 50% of the leaf/ needle affected 14000 Sucking Insects Any damage to the terminal leader; damage ≥ ALL 20% of the foliage with ≥ 50% of the leaf/ needle affected 14073 Asian cycad scale Aulacaspis yasumatsui Any damage to the terminal leader; damage ≥ PNW 20% of the foliage with ≥ 50% of the leaf/ needle affected 15000 Boring Insects Any damage to the terminal leader; damage ALL >20% of the roots, stems, or branches 19000 General Diseases Any damage to the terminal leader; damage > ALL 20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; > 20% of the branches affected; damage > 20% of the foliage with > 50% of the leaf/needle affected 21000 Root/Butt Diseases Any occurrence ALL 21008 Ganoderma rot of hardwoods Ganoderma lucidum Any occurrence PNW 21016 flame tree root disease Phellinus noxious Any occurrence PNW 22000 Cankers Any occurrence All Appendix D: 22087 nonrust canker unknown Damage ≥20% of bole circumference (in a PNW running 3-foot section) at point of occurrence 22500 Stem Decay Any visual evidence All 23000 Parasitic/Epiphytic Plants Dwarf mistletoes with Hawksworth rating of ALL ≥3; true mistletoes or vines covering ≥ 50% of crown 23003 vine damage vine damage Vines covering ≥50% of crown PNW; NRS

23020 true mistletoe (other) True mistletoe covering ≥50% of crown IW; PNW DAMAGE CODES 24000 Decline Complexes/Dieback/ Damage ≥ 20 dieback of crown area ALL Wilts 24006 coconut cadang-cadang viroid Cocadviroid coconut cadang- Damage ≥ 20% dieback of crown area PNW cadang viroid 24010 joga decline joga decline Damage ≥ 20% dieback of crown area PNW 25000 Foliage diseases Damage ≥20% of the foliage with ≥50% of the ALL leaf/needle affected pg.278 CODE Common Name Scientific Name Threshold REGION 26000 Stem Rusts Any occurrence on the bole or stems (on ALL multi-stemmed woodland species), or on branches ≤1 foot from boles or stems; damage to ≥ 20% of branches 27000 Broom Rusts ≥50% of crown area affected ALL 30000 Fire Damage ≥ 20% of bole circumference; >20% ALL of stems on multi-stemmed woodland species affected ≥20% of crown affected 41000 Wild Animals Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 41013 deer Odocoileus spp. Any damage to the terminal leader; damage PNW ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 41014 feral pigs Sus scrofa Any damage to the terminal leader; damage PNW ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 42000 Domestic Animals Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; > 20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/needle affected 50000 Abiotic Damage Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; > 20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/needle affected 50008 lightning Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with >20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/needle affected 50013 wind Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the

DAMAGE CODES multiple-stems (on multi-stemmed woodland : species) with > 20% of the circumference affected; >20% of the branches affected; damage ≥ 20% of the foliage with ≥50% of the leaf/needle affected

Section D.1 pg.279 CODE Common Name Scientific Name Threshold REGION 50020 saltwater injury - flooding/ Any damage to the terminal leader; damage PNW hurricane ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; > 20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/needle affected 60000 Competition Overtopped shade intolerant trees that are not ALL expected to survive for 5 years or saplings not expected to reach tree size (5.0 inches DBH) 70000 Human Activities Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/needle affected 70007 logging damage Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/needle affected 71000 Harvest Removal of ≥10% cubic volume ALL 90000 Other Damages and Any damage to the terminal leader; damage ALL Symptoms ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; >20% of the branches affected; damage ≥20% of the foliage with ≥50% of the leaf/needle affected 90001 broken top Not recorded for multi- When actual length is less than total length ALL stemmed trees 90002 dead top Any occurrence IW; PNW; NRS 90004 forked top Not recorded for non sawlog Any occurrence PNW trees 90005 forked below merch top Not recorded for non sawlog Damage when board foot defect is > 10% IW; PNW trees 90006 crook or sweep Not recorded for non sawlog Damage when board foot defect is > 10% IW; PNW trees 90007 checks, bole cracks Not recorded for non sawlog Damage when board foot defect is > 10% PNW trees 90008 foliage discoloration Damage > 20% of crown affected IW; NRS;PNW 90010 dieback Damage > 20% of crown affected IW, PNW, NRS 90011 open wound Damage ≥20% of bole circumference (in a IW; PNW Appendix D: running 3-foot section) at point of occurrence 90012 resinosis Damage ≥20% of bole circumference (in a PNW running 3-foot section) at point of origin; ≥20% of branches affected 90013 broken branches Damage ≥20% of branches affected PNW 99000 UNKNOWN Any damage to the terminal leader; damage ALL ≥20% of the roots or boles with > 20% of the circumference affected; damage > 20% of the DAMAGE CODES multiple-stems (on multi-stemmed woodland species) with > 20% of the circumference affected; >20% of the branches affected; damage ≥ 20% of the foliage with ≥50% of the leaf/needle affected pg.280 : pg.281

is

do

do

very

date,

other

lands.

or

are

future

area

a

recreational

at

on federal

borders

the

or

of

and

river

map

the Appendix E Appendix

size

wood production, most

wood production, most

a

as scenic

of

the

by Congress

side

and

preclude

preclude

classified

either

objectives. If

do not

do not

from

anywhere

: : Reserved and and Reserved

segments

NSAs

NRAs

mile

in

1/4

management

anybody

some

some

of

be/have been "released"

by

of of

river

area

They can

further

default

legislation

legislation

to

conditions; harvest

a

be proposed Administratively W Administratively

the

the

can

have

other bills.

allowed

Comments

Some of these are within National Parks, and are reserved either way.

These are areas that were established by Congress during the RARE II process or in but until then are managed by the agency as wilderness. Areas recommended as wilderness through land management planning are managed as wilderness until Congressional action or revised Forest Plan direction.

Managed as Wilderness pending possible designation

These fluid up until the time the bill is passed (or not). No apparent impact on current management.

Agencies have treated these executive orders as having the force of law, with modifications requiring an act of Congress.

Although and given the emphasis is likely to be minor, so default to reserved.

Wood production is not an objective for any wild and scenic river (FSM 2354.42d). Harvest in segments classified as wild is excluded except under emergency

only information is unavailable, use 1/4 mile on either side of the river on federal land (1/2 mile in Alaska). Includes "eligible" or "suitable" study rivers. Wood production is not allowed and harvest restrictions are similar to designated rivers (FSH 199.12 82.51). Study rivers

Although and given the emphasis is likely to be minor, so default to reserved. Purpose includes research and management

Purpose includes research and management

or

unit

ITHDRAWN STATUS BY OWNER AND LAND

admin.

Congress

Congress

Congress

Congress

Congress

groups, etc.

Federal unit,

Federal unit,

Congress/WO

Congress/WO

Designated by

recommended

recommended ithdrawn Status by Owner and Land Designation Designation Land and Owner by Status ithdrawn

not designated;

recommended by

legislators, interest

Executive Order or

Congress, proposed

Congress, proposed

Federal

c

1

0

0

0

0

1

1

1

0

1

0

0

RESERVCD

Rita,

ADMINISTRATIVELY W

(Santa

(and example)

MI)

AZ)

Range

GA/TN)

River, WA)

Brook, NH)

Pleasant, VA)

wilderness, MT)

Canyon WSA, CO)

Primitive Area, AZ)

Proposed Wilderness

Canyon NRA, OR/ID)

scenic or recreational

(Lionhead recommended

Staircase-Escalante, UT)

Recommended Wilderness

Primitive Area (Blue Range

(wild, scenic or recreational

Volcanic Monument (Grand

National Monument/National

classification) (White Salmon

Wild and Scenic Rivers (wild,

Wild and Scenic Study Rivers

classification) (Au Sable River,

Wilderness Study Area (Browns

National Recreation Area (Hell's

Wilderness (Cohutta Wilderness,

Experimental

RESERVED AND

DESIGNATION

all

all

all

all

all

all

all

all

all

all National Scenic Area (Mt.

all Experimental Forest (Hubbard

OWNCD Land designation

Note: Ordered by owner code, national to local, and reserve status, with actual and candidate areas grouped

10

10

10

10 all

10,20

10,20

10,20

10,20

10,20

10,20

10,20

10,20

OWNGRP

APPENDIX E

pg.282

with with

done done

agency agency

agency agency

agency agency

multiple multiple

those those

for for

of purposes, purposes, of

land planning planning land

but but

governing governing

governing governing

governing governing

groups, groups,

land planning planning land

variety variety

managed managed

a a

but but

laws laws

laws laws

laws laws

for for

and and

with WO, WO, with

base, base,

law, but but law,

law, but but law,

law, but but law,

conservation conservation

harvest harvest

with WO, WO, with

by by

by by

by by

for for

some some

timber timber

coordination coordination

suitable suitable

in the the in

coordination coordination

designated designated

designated designated

designated designated

as as

as as

owned by by owned

be be

be be

be be

Plans Plans

Plans Plans

those those

may not not may

may not not may

may not not may

or or

or or

or or

in Forest Forest in

in Forest Forest in

including including

was established through through established was

may may

may may

may may

established through through established

Rule Rule

A broader group of landowner classes than OWNCD. than classes landowner of group broader A

areas areas

areas areas

areas areas

may be be may

designated designated

designated designated

private lands, lands, private

conservation easements, and tribal protected areas, are considered unreserved considered are areas, protected tribal and easements, conservation

All All

timber products timber

Usually managed by state agencies for multiple values, including production of of production including values, multiple for agencies state by managed Usually

mandate or defining Reserves preclude management for timber production. timber for management preclude Reserves defining or mandate

Specific Specific

mandate or defining Wild Rivers preclude management for timber production. timber for management preclude Rivers Wild defining or mandate

Specific Specific

mandate or defining Wilderness preclude management for timber production. timber for management preclude Wilderness defining or mandate

Specific Specific

management for timber production timber for management

Rarely specifically designated by law, but laws defining agency goals preclude preclude goals agency defining laws but law, by designated specifically Rarely

protection; managed by NOAA by managed protection;

Established in Coastal Zone Management Act of 1972 for research and and research for 1972 of Act Management Zone Coastal in Established

designation given by the land-owner to determine status . status determine to land-owner the by given designation

range of conservation purposes. Ignore the landmark status and use the the use and status landmark the Ignore purposes. conservation of range

Designated by USDI but managed/owned by various public entities for a wide wide a for entities public various by managed/owned but USDI by Designated

production is not goal of the agency. the of goal not is production

Not clear if all FWS refuges are designated by Congress or not, but timber timber but not, or Congress by designated are refuges FWS all if clear Not

as a goal a as

NCAs are focused on limited resources for protection, many have "multiple use" use" "multiple have many protection, for resources limited on focused are NCAs

management units management

Authorized by Congress in FLPMA to protect significant areas, designated by by designated areas, significant protect to FLPMA in Congress by Authorized

reserved.

Lake Roosevelt, Ebey's Landing, and National Historic Sites; these are NOT NOT are these Sites; Historic National and Landing, Ebey's Roosevelt, Lake

Some NPS units/designations are on private land: Canyon de Chelly, parts of of parts Chelly, de Canyon land: private on are units/designations NPS Some

use

Areas Areas

but not in the timber base timber the in not but

Areas Areas

and future changes are done at NF level NF at done are changes future and

Roadless Roadless

at NF level NF at

RNAs RNAs

Dept

Dept

Dept

USDI

Congress

Congress

Congress

Congress

State Forestry Dept Forestry State

State or local Parks Parks local or State

State or local Parks Parks local or State

State or local Parks Parks local or State

0

0

1

1Dept Parks State

1

1

1

0

1 Order/ Executive

0

0unit BLM

1 Order/ Executive

0unit NFS

0unit NFS

0unit NFS

0unit NFS

0unit NFS

0unit NFS

Agency for public lands) of the land in the condition class; class; condition the in land the of lands) public for Agency

imber harvest may still be allowed for other land management objectives. See description for Reserved Status. Reserved for description See objectives. management land other for allowed be still may harvest imber

T

PR)

State Forests State

Perpetua, OR) Perpetua,

All private lands private All

The class in which the landowner (at the time of the inventory) belongs. inventory) the of time the (at landowner the which in class The

State Wild River Wild State

Reserve System Reserve

(Kings River, CA) River, (Kings

Smith Springs, IL) Springs, Smith

State or local Parks local or State

(Limestone Jags, AK) Jags, (Limestone

State or local Reserve local or State

Research Natural Area Area Natural Research

ALL National Park Service Service Park National ALL

National Natural Landmark Landmark Natural National

(Caledon Natural Area, VA) Area, Natural (Caledon

Suitable for Timber Harvest Timber for Suitable

Special Interest Area (Cape (Cape Area Interest Special

designations on federal land federal on designations

designations on federal land federal on designations

National Estuarine Research Research Estuarine National

National Conservation Areas Areas Conservation National

Special Recreation Area (Bell (Bell Area Recreation Special

Roadless Area (Carribean NF, NF, (Carribean Area Roadless

Suitable for Timber Production Timber for Suitable

Areas of Critical Environmental Environmental Critical of Areas

Concern (High Rock Canyon, NV) Canyon, Rock (High Concern

all

31

31

25

23 Service Wildlife and Fish ALL

22

22

21

VCD: Reserved from timber production. production. timber from Reserved VCD:

RESER

OWNCD: Owner class code. code. class Owner OWNCD:

OWNGRP: Owner group code. Ownership (or the managing managing the (or Ownership code. group Owner OWNGRP:

40 all

30

30 all

30

30 allWilderness local or State

30 all

20

20

20

20

20

10 all

10 all

10 all

10 all

10 all

10 all

c.

b.

a.

10,20,30

: pg.283 APPENDIX F QUALITY ASSURANCE/QUALITY CONTROL (QA/QC)

SUBSECTION F.0.1 PNW QC CHECK PLOT FREQUENCY

SECTION F.1 QA/QC PLOTS TYPES Blind Check - QA/QC personnel or a production crew remeasure a randomly selected, recently completed plot for the purpose of obtaining an estimate of measurement error. The blind check is completed without the inspectors looking at the production crew's data. The results of blind remeasurements are analyzed at a regional and national level. The blind plot data are not used to evaluate a crew's performance. Cold Check - QA/QC personnel inspect a recently completed plot for the purpose of providing feedback about measurement quality and determining whether measurement quality objectives (MQOs) are being met by the production crew. This inspection is conducted by QA/QC personnel using the production crew's data without members of the production crew being present. The plot is checked for proper installation and the data are checked for accuracy and completeness. Cold checks are documented and tracked, and an effort is made to give all crew members adequate checks and feedback. Feedback about the results of the inspection is given during a review session with the QA/QC and production crews present after the inspection is complete. In addition, additional training should be given as needed based on the results of the cold check plots. Due to the unique logistics of the Pacific Islands Inventory, blind and cold checks may be co-located, if necessary. Co-location is used to maximize the efficiency of the QA/QC crew by combining blind and cold check measurements on the same plot and at the same time. Given that there is only one production crew currently working in Hawaii, the only way that blind checks can be completed is by the QA/QC crew. In other island groups where there may be multiple crews working, blind checks can be completed by any production crew, regardless of whether a QA/QC is present or not. Because of the additional time required to conduct a co-located blind and cold check, the decision was made to thoroughly examine two randomly selected subplots: the remaining two will have a rough examination focusing on the key components of the subplot. The two thoroughly examined subplots are the same for both the blind and cold checks. Appendix F: Hot Check - A hot check is a location inspection where QA/QC personnel are present with the field crew during plot installation or re-measurement. The QA/QC crew will observe the production crew and check their data as the crew measures the plot. The purpose of this inspection is to provide on-the-spot feedback regarding procedural adherence, data quality, and safety; both positive and negative feedback is given.

SECTION F.2 QA/QC CHECK PLOT SELECTION QUALITY Co-located Blind and Cold Checks - A total of 4 percent is set as the goal for co-located blind and cold checks in PNW-FIA. Whether or not this goal can be met in the Pacific Islands is dependent on logistics and funding but it should be prioritized in order to maintain consistency in data quality with the other FIA units. The plots that are selected as QA/QC check plots will not be known to the field crew until the plot has been ASSURANCE/QUALITY CONTROL (QA/QC) completed, uploaded to the MIDAS database, and written up. For the purposes of the blind check data analysis, blind check plots should be chosen randomly if at all possible. Cold check plots can be co-located with blind checks but they can also be conducted in a non-random fashion to provide specific feedback to certain crews. Blind and cold checks should be completed as soon as possible after the production crew’s visit. Hot Checks - The target for hot checks is 3% of field visit plots. Each crew member should receive at least one hot check early in the season. Hot checks can also be used throughout the summer as a training tool for field crew members with poor performance, or to foster measurement consistency among the field crew. pg.284 SECTION F.3 CO-LOCATED BLIND AND COLD CHECK PROCEDURES

SUBSECTION F.3.1 BLIND CHECK FIELD PROCEDURES The QA/QC crew can and should review any data available to the current year's production crew. However, aside from the travel description, the current production crew's data should not be referenced during the blind check. The QA/QC crew should measure all the needed data items as an independent measurement of the plot, and the same amount of care and attention to detail should be taken as on a standard production plot. If time constraints limit the completion of certain data items, the production crew's data should not be copied into the blind check file. All Plot Level Data must be completed as well as RP and GPS information, with new GPS coordinates collected by the QA/QC crew. All the Subplot Information and Condition Class data items must be completed for all four subplots. Two randomly selected subplots are completely remeasured for the blind check. All data items for these two subplots are remeasured by the QA/QC crew. These subplots are done exactly as they would be done in a production setting. For the other two subplots, only the Subplot Information data items are filled out, as well as additional Condition Class information if a new condition is encountered. Notes: • Plots, subplots, and microplots are measured by the QA/QC crew at the location of the pin installed by the production crew, even if the pin was installed in the wrong location. Similarly, tree diameters should be measured at the nails installed by the production crew, regardless of if the nail was placed at the wrong location. Length to diameter should be the length measured by the QA/QC crew to the point at which the diameter was measured by the production crew. • While completing a blind check, it is important that the tree numbers assigned by the QA/QC crew correspond with the tree numbers assigned by the recent production crew and the initial production crew (when the plot is a remeasure). Tree numbers are marked with a paint stick by the recent production crew on all tally trees including saplings. If the QA/QC crew encounters a tree missed by the initial crew but picked up by the recent production crew, the tree should get the same tree number as given by the recent production crew. If the QA/QC crew finds a tree missed by the recent production crew, that tree needs to get a number that will not interfere with any other tree number on the subplot. The missed tree should be added to the end of the blind check tree tally list for that subplot. If the QA/QC crew encounters a tree incorrectly tallied by either the initial or recent production crew, the tree number given

PROCEDURES to this tree should be skipped and not assigned to any of the newly tallied trees on this subplot. All tree numbers between the recent production crew tally and blind check crew tally must match for the analysts to properly analyze the blind check data. • The same RP as the production crew should be used by the QA/QC crew. • Record Vegetation Profile and Invasive Plants cover estimates as seen at the time of the blind visit. If it is apparent that trampling of understory vegetation has affected measurements, make a subplot level note.

SUBSECTION F.3.2 COLD CHECK PROCEDURES After the blind check is completed for both subplots, the file is exited and a new cold check file is opened in the PDR. Creating this file populates the cold check fields with the data collected during the blind check. The QA/QC crew reviews the data line-by-line and compares the blind check data to a printed copy of the recent production crew's data. Any discrepancies are noted, and those which are outside of tolerance are marked in red. Each of these identified variables is revisited and reassessed to establish if the error was on the behalf of the QA/QC crew or the production crew. QA/QC crew members should alternate when the variables in question are reassessed. For example, if one individual was measuring tree length during the blind check, a different individual should remeasure tree length as part of the checking procedure. Attention

CO-LOCATED BLIND AND COLD CHECK should be paid to the procedure of error checking and obtaining "true" values for the variables in question. : Errors on the behalf of the production crew or the QA/QC crew are then "fixed" in the cold check file to .3 reflect the "true" value. If time constraints limit the completion of certain data items, the production crew's data should not be copied into the cold check file. Notes:

Section F pg.285 • For the two subplots that are not measured in their entirety, subplot/microplot pin placement and condition class need to be checked. In addition, the subplots should be checked for added or missed trees and saplings. • As with the Blind Check, plots, subplots, and microplots are measured at the pin location installed by the production crew. If a plot, subplot, or microplot was installed in the wrong location, make a note for the cold check report • If a tree diameter was measured at an incorrect location by the production crew, the diameter should be measured at the correct location by the QA/QC crew and given the appropriate length to diameter. Since diameters are measured at the production crews location for the blind check and that data is copied into the initial cold check file, it is important that the QA/QC notes if they have a tree where the diameter is measured at the incorrect location during the blind check so the proper diameter value can be entered for the cold check. • RP information, photowork (RP and PC pinpricks, distance/azimuth calculations, etc.), and plot location (in the case of a new install) must be checked carefully to ensure that plots can be relocated in the future. • The contents of the plot folder should be checked for completeness and accuracy, including: the plot card, photos, FDM explanation sheet, HT/DBH graph, and boundary viewer printout. • Benefit of the doubt, or tolerance in addition to the standards set in the manual, should only be given in situations in which the QA/QC crew is unable to demonstrate conclusive error on the part of the production crew, or in nebulous situations where the "true" answer is highly subjective (e.g., unclear condition class delineation).

SUBSECTION F.3.3 INTEGRITY OF QA/QC CHECK PLOT DATA It is fairly common to find some misplaced monumentation installed by the production crew during the QA/ QC check. It is the policy of the PNW QA/QC program to never alter the data collected or monuments installed by the production crew unless they represent a hazard to the safety of future crews. QA/QC crews do not move PC pins, microplot pins, subplot pins, renumber trees, move nails, etc. In addition, data are not altered in the blind check file/plot card, or in the production file/plot card. There are two exceptions to this Appendix F: rule: a safety hazard, or a major error in the travel directions that would result in significant navigation delay for the future crew.

SECTION F.4 DOWNLOADING BLIND AND COLD CHECK DATA Data from blind and cold checks must be run through the PDR edit program and FDM and uploaded to MIDAS just as if they were production plots. QUALITY

SECTION F.5 COLD CHECK REVIEW SESSION

The review session following a QA/QC cold check is an opportunity for QA/QC personnel to provide ASSURANCE/QUALITY CONTROL (QA/QC) production crews with constructive feedback to help improve data quality. The review session should take place as soon as possible after the plot has been checked and recommendations for work quality improvement have been written. All positive and negative aspects of the production crew performance should be discussed and documented, with an emphasis on techniques the production crew can use to improve data collection quality in the future. pg.286

COLD CHECK REVIEW SESSION

:

.5

Section F pg.287 APPENDIX G GPS OPERATING GUIDE

SECTION G.1 OVERVIEW Global Positioning Systems (GPS) technology uses signals from satellites to triangulate and compute the coordinates of locations on the ground. PNW-FIA uses coordinates to correlate plot information with remotely sensed imagery and data, and to relocate plots at future inventories. GPS units can also be used to create and navigate to waypoints. A waypoint is a fairly precise location that a GPS user may assign a number or label to identify. Waypoints can be entered into the GPS unit to navigate to, or they can be recorded while navigating to mark a particular location. The Pacific Islands inventory uses Trimble GEOXH 6000 and Garmin GPSmap 76Cx GPS receivers. The Pacific Islands inventory uses the UTM (Universal Transverse Mercator) coordinate system. This format includes the following information: • Zone, a 2 digit number (01-60) with a letter (C-X) attached. All zones in the western U.S. will be a combination of the numbers 10 and 11, and letters U, T, or S. • Easting, a seven digit number (the first digit is often a zero) that represents distance from the eastern boundary of the particular zone. • Northing, a seven digit number that represents distance north of the equator (northing numbers are usually instrumental in determining what zone the coordinates are in).

SECTION G.2 TRIMBLE GEOXH 6000 UNIT The Terrasync program is used on the GeoXH to collect GPS data. The TerraSync software is arranged in the following five sections: Tapping the Section box displays the five program sections • Map (displays map view of waypoints and current position) • Data (screens used for GPS data collection) • Navigation (screens used for navigation and waypoint creation) • Status (displays current coordinates, elevation, precision of position) • Setup (screens to change coordinate system, datum, units for display). • Exit (used to close the Terrasync program) One of these sections is always active and visible. The Section list button shows the section that is currently

active. You can move between sections at any time without closing any open forms or screens. To switch to Appendix G: a different section, tap the Section list button and then tap the section you want from the drop-down list. For general questions on operation of the GeoXH, crews can contact the FS GPS Front-Line Support at 1- 866-560-6200 toll free and by email at [email protected].

SUBSECTION G.2.1 COLLECTING A SUBPLOT ROVER FILE WITH THE GEOXH 6000 UNIT

For each of the 4 subplots at least 15 minutes (900 observations) are collected. If a subplot is not sampled, GPS OPERATING GUIDE see Subsection G.2.2 to create a dummy rover file for the subplot. 1. Turn on the GeoXH by depressing the green button. 2. Tap "GeoXH" on the screen. 3. Tap "GNSS Application Launcher" to start the Terrasync data collection program. 4. Wait until a position is displayed instead of "?" in the "Status" screen. 5. If "GNSS is disconnected" is displayed and no satellites are shown, tap "Status"in the upper left corner of the screen, then tap "Setup" from the drop down menu, then tap "GNSS" in the upper right of the screen to turn the GNSS tracking on. Then, skip to step 8. 6. Tap the drop down arrow in the upper left area of the screen (next to "Status"). 7. Tap "Setup" in the drop down menu. pg.288 8. Tap the "Coordinate System" icon in the lower left area of the screen. Confirm that the System box has "UTM" selected. Confirm that the correct UTM zone for the plot is highlighted. Confirm that the correct datum for the plot is highlighted: WGS 84 (PA11) Confirm that the Altitude Reference box has "Mean Sea Level (MSL)" selected. Confirm that the Altitude Units box has "Feet" highlighted. If working outside these areas, consult with the state coordinator for correct values. Note: these configuration settings will remain the same when the GeoXH is powered down. 9. Tap "Data" in the drop down menu. 10.In the File Name box, enter the rover file name in this format: For production plots: st-cty-plot%-sp# (e.g. ca-029-05247-sp1 where st is the 2 character state code, cty is the 3 digit county code (including any leading zeros), plot% is the 5 digit plot number (including any leading zeros), sp# is "sp" followed by the 1 digit subplot number 1-4). For cold and blind plots: Add a C or a B to the end of the file name (e.g. ca-029-05247-sp1C, ca- 029-05427-sp1B). This will prevent the cold or blind rover files from overwriting the production rover file when loaded to the server. 11.Tap "Create" at the bottom of the screen. 12.Tap the large "Point_generic" box. 13.Lay the GeoXH unit on a pack with the antenna patch relatively level. The pack should not be within 5 feet of a large diameter tree (over 20" DBH) if possible. The pack may be placed up to 30 ft from the subplot center. The pack should not be placed under heavy understory if possible. 14.Measure the horizontal distance (nearest 1/10th ft) and azimuth (0-359, nearest degree) FROM the center of the internal GeoXH antenna to the subplot center.

TRIMBLE GEOXH 6000 UNIT

: 15.Enter the subplot number in the Comment box in this format: sp=# (e.g. sp=2) where # is the subplot number (1-4). 16.Tap "Options" in the upper right part of the screen. 17.Tap "Offset" from the drop down menu.

Section G.2 pg.289 18.Tap "Distance-Bearing" from the offset choices. 19.Enter the azimuth (nearest degree) in the Bearing box. Note: a "T" will be displayed in parenthesis next to "Bearing" if True North azimuths are expected (Pacific Islands). Note: Tap the keyboard icon (bottom of screen) to bring up numbers if not displayed. 20.Enter the horizontal distance (nearest 1/10th ft) in the Horizontal distance box. 21.Leave the vertical distance "0.00" 22.Tap "Done" at the bottom of the screen. 23.Tap "Log" at the bottom of the screen to start logging satellite data. Notice that the number of recorded positions is displayed in the upper right corner of the screen. 24.Leave the GeoXH collecting data for AT LEAST 15 minutes (at least 900 positions). Note: Don't stand over the unit as your body will block GPS signals. 25.After at least 15 minutes, tap "Done" at the bottom of the screen. 26.Tap "Close" at the bottom of the screen. 27.Tap "Yes" to confirm closing the rover file. 28.Tap "Data" in the upper left corner of the screen. 29.Tap "Exit" from the drop down menu to exit the Terrasync program. GPS data collection for the subplot is completed. Repeat this procedure for remaining subplots. NOTE: Completely shutdown the GeoXH power to conserve battery life between subplots. To do this, press and hold the green power button for 3 seconds, then tap "Shutdown".

SUBSECTION G.2.2 CREATING A DUMMY SUBPLOT ROVER FILE WITH THE GEOXH 6000 UNIT If the subplot is not sampled, a dummy rover file must be created on the GeoXH. This file may be created at any location (truck, field, office), but must be created before the rover files are transferred from the GeoXH to the laptop. 1. Turn on the GeoXH by depressing the green button. 2. Tap "GeoXH" on the screen. 3. Tap "GNSS Application Launcher" to start the Terrasync data collection program. 4. Wait until a position is displayed instead of "?" in the "Status" screen. 5. Tap the drop down arrow in the upper left area of the screen (next to "Status"). 6. Tap "Data" in the drop down menu. 7. In the File Name box, enter the rover file name in this format: st-cty-plot%-sp# (e.g. ca-029-05247-sp1 where st is the 2 character state code, cty is the 3 digit county code (including any leading zeros), plot% is the 5 digit plot number (including any leading

zeros), sp# is "sp" followed by the 1 digit subplot number 1-4). Appendix G: 8. Tap "Create" at the bottom of the screen. 9. Tap the large "Point_generic" box. 10.Enter the subplot number and the reason the subplot was not GPSed in the Comment box. 11.Tap "Done" at the bottom of the screen. 12.Tap "Log" at the bottom of the screen.

13.Tap "Done" at the bottom of the screen. GPS OPERATING GUIDE 14.Tap "Close" at the bottom of the screen. 15.Tap "Yes" to confirm closing the rover file. 16.Tap "Data" in the upper left corner of the screen. 17.Tap "Exit" from the drop down menu to exit the Terrasync program. The dummy rover file has been created.

SUBSECTION G.2.3 DISPLAYING COORDINATES FOR PLOT CENTER (OPTIONAL) Crews may choose to use the GeoXH instead of the recreational grade GPS unit for realtime (not post- processed) plot center coordinates: pg.290 1. Turn on the GeoXH by depressing the green button. 2. Tap "GeoXH" on the screen. 3. Tap "GNSS Application Launcher" to start the Terrasync data collection program. 4. If the Terrasync is already running, select "Staus" from the drop down menu in the upper left corner of the screen. 5. Wait until a position is displayed instead of "?" in the "Status" screen. 6. The current position (in UTM meters) and elevation (MSL, ft) is displayed under the satellite Skyplot graphic. The estimated horizontal precision of the position in feet is shown in the upper right corner of the screen with a double-ended arrow below the value. 7. Wait until the precision value drops below 70 feet, then enter the PC coordinates, elevation and precision in MIDAS on the Allegro.

SUBSECTION G.2.4 NAVIGATING WITH WAYPOINTS Crews may use the GeoXH to create a waypoint or navigate to a way point. To create a waypoint: 1. With Terrasync already running, select "Navigation" from the drop down menu in the upper left corner of the screen. 2. To create a waypoint, tap the "Navigate" drop down menu (below the "Nav" menu in top left corner of screen) and tap "Waypoints". 3. Highlight the waypoint file that will be used, then tap "Open", alternatively, tap "New" to create a new waypoint file. 4. Tap "Options", then "New" from the drop down menu. 5. Enter the waypoint name. 6. Tap North, then enter the waypoint value. 7. Tap East, then enter the waypoint value. 8. Tap "Altitude", then enter the waypoint elevation. Alternatively, to use the current GPS location, tap "Create From" in the upper right corner, then tap "GNSS". 9. If an offset is needed (e.g., to create a waypoint from plot center to subplot 4, enter 240 degrees and 120 feet), enter the azimuth and horizontal distance (use 0.00 vertical distance default value). 10.Tap "Done". 11.To navigate to an existing waypoint, tap "Waypoint", then highlight the target waypoint. 12.Tap "Nav" in the upper left corner of the screen, then select "Navigate" from the second-row drop down menu. 13.The navigation screen appears, with the distance and heading from the current position to the selected waypoint, along with an arrow indicating the direction to move to get to the waypoint. 14.Tap "Nav" in the upper left corner of the screen, then "Map" from the drop down menu to see the map view of the waypoints and current position.

SUBSECTION G.2.5 DOWNLOADING THE SUBPLOT GEOXH ROVER FILES TO A LAPTOP 1. Connect the laptop to the GeoXH with the Trimble USB cable. 2. Turn on the GeoXH by pressing the green power button. 3. Start the "Trimble Data Transfer" program by either clicking on the desktop icon or by clicking on the Windows "Start" icon, then "All Programs", "Trimble", "Trimble Data Transfer". 4. Click "Add", then "Data file". 5. Highlight the files you want to transfer (hold laptop "Ctrl" key to select more than 1 file), then click "Open" 6. Click "Browse" and select the "C:\Midas\PlotPackets\PNWRS\GPS" folder (folder must already be created).

TRIMBLE GEOXH 6000 UNIT

: 7. Click "Transfer All". 8. Click "Close" to exit the program. The file has now been moved to the laptop.

Section G.2 pg.291 SUBSECTION G.2.6 DELETING SUBPLOT GPS FILES FROM THE GEOXH Once a month, after all rover files have been transferred from the GeoXH to the laptop and the *.SSF files in the "C:\Midas\PlotPackets\PNWRS\GPS" folder have been backed up and sent to the office, you may delete the transferred rover files from the GeoXH. 1. Turn on the GeoXH by depressing the green button. 2. Tap "GeoXH" on the screen. 3. Tap "GNSS Application Launcher" to start the Terrasync data collection program. 4. Tap the drop down arrow in the upper left area of the screen (next to "Status"). 5. Tap "Data" in the drop down menu. 6. Tap the drop down arrow in the upper left area of the screen under "Data" (next to "New"). 7. Tap "File Manager" from the drop down menu. 8. Tap the rover file to be deleted to highlight it. Note: "Status" (shown at the bottom of the screen) will be "Transferred" if the rover file has previously been downloaded to the laptop. 9. Tap "Options" in the upper right corner of the screen. 10.Tap "Delete" from the drop down menu. If the file hasn't been transferred, a warning will appear-don't delete the file unless certain it is not a valid subplot rover file that needs to be deleted. 11.Tap "Yes" to confirm delete. 12.When done deleting files, tap "Data" in the upper left corner of the screen. 13.Tap "Exit" from the drop down menu to exit the Terrasync program.

SUBSECTION G.2.7 CHARGING THE GEOXH BATTERY The GeoXH battery life is about 10 hours continuous run time. The battery should be charged each night if possible. If not, conserve power by completely shutting down the unit when not in use by holding the green power button down for 3 seconds and then tapping "Shutdown". If camping for extended periods (1 week), a fully charged battery should allow GPS'ing of 5 full plots (20 subplots at 20 minutes run time per subplot is 6.7 hours, leaving 2 hours of battery life for navigation to plots). The battery can be charged in the unit or removed from the unit. 1. To remove the battery pack: Pinch the latches together until the latches disengage from the handheld, and then slide the battery out. 2. To install the battery pack: Insert the battery pack into the battery opening and then push the battery firmly into the handheld, ensuring that both battery latches click into place fully. Appendix G: GPS OPERATING GUIDE pg.292 SUBSECTION G.2.8 UPDATING THE GEOXH CONFIGURATION FILES The GeoXH units have configuration files that allow setting to be locked. This minimizes the probability of crews changing settings and also sets the units to not display unnecessary input screens. There is a configuration file for Oregon, Washington, California and the Islands and a configuration file for Alaska. 2014IS conform this for the Islands The Islands configuration file sets the default coordinate system to UTM, WGS 84 (PA11), zone 10N. The user can change the coordinate system setting to match the datum and UTM zone of the plot. The selected configuration file stays the same when the unit is powered down. If a GeoXH unit is moved from FIA-South to Alaska or vice versa, the appropriate configuration file must be loaded. 1. Turn on the GeoXH by depressing the green button. 2. Tap “GeoXH” on the screen. 3. Tap “GNSS Application Launcher” to start the Terrasync data collection program. 4. Tap the drop down arrow in the upper left area of the screen (next to “Status”). 5. Tap "Setup" in the drop down menu. 6. Tap "Change" in the Current Configuration section of the screen. 7. Enter "fia" in the Enter Password box, then tap “Done.”

SECTION G.3 GARMIN GPSMAP 76CX

SUBSECTION G.3.1 GPS KEYPAD LAYOUT AND COMMANDS PWR: (red circle) key, hold down to turn the unit on and off. Press to adjust screen backlighting. ENTER: (mark) press and release to enter highlighted option. Press and hold from any main menu/ navigation screen to mark a waypoint. MENU: press and release to view the Options Menu for a page. Press twice to view main menu. QUIT: cancels the operation of the last button pressed and/or moves to previous screen FIND: (MOB) Press to go to the find menu. Highlight waypoints and a list of saved waypoints will appear. PAGE: press to move forward through main menu pages IN: zooms in the display of the map screen OUT: zooms out the display of the map screen LEFT/RIGHT (Rocker Key) move the cursor left or right while entering data or selecting menu options UP/DOWN (Rocker Key) move the cursor up and down while entering data or selecting menu options. Initiate screen backlight: quickly press the PWR key. Note: Adjust screen backlight: after turning the screen backlight on, press the power key again to brighten, press again to turn off.

GARMIN GPSMAP 76CX

:

Section G.3 pg.293

SUBSECTION G.3.2 GPS UNIT SETUP The Garmin has several MAIN MENU screens that can be displayed or turned off. Some screens must be displayed in order to get coordinate information. Several screens display similar, or the same, information and it is recommended that these screens not be displayed. When the unit is powered on, the “Main” Main Menu screen appears. Scroll to the right and highlight Setup and press ENTER key. Select the following fields one at a time and check that the correct information is set to display in each. To open each, scroll to it’s icon and press Enter. Press DOWN key to select setup option, then press the ENTER key to change units. Scroll through drop down list and press enter to update/change field. When done, Press Quit to exit and choose new field from the Setup menu. System: set “GPS” to battery saver, set “WAAS/EGNOS” to enabled, set “battery type” to alkaline (if using this type) Time: set “Time Zone” to US Hawaii- there is not daylight savings time . After system and time are set, scroll to the Units icon and press Enter.

Units: To scroll through the following pages use the up/down arrows. Appendix G: Position Format: UTM/UPS MAP DATUM: WGS 84 Distance/Speed: Statute Elevation: Feet (ft/min) Heading: “Display” set to Degrees and “North Reference” to Magnetic

IMPORTANT: Make sure that the MAP DATUM being used is the correct DATUM specified for your area. GPS OPERATING GUIDE This is set on the UNITS page. Using a different datum will alter the coordinates significantly.

SUBSECTION G.3.3 MAIN MENU PAGES The Garmin has six initial menu screens. Scroll through menus by pressing Page to scroll forward or Quit to scroll backwards. The menu screens are: Main Menu Find Satellite Trip Computer pg.294 Compass Map *Battery status and signal strength can be checked in the status bar at the top of all Main Menu/Navigation screens.

SUBSECTION G.3.4 CUSTOMIZING NAVIGATION SCREENS It is important to have navigation screens setup consistently among all units. Office defaults will be set for each unit. While most screens can be customized, it is recommended that the office defaults remain consistent. For most screens, small numbers will be selected to show more data fields. While on a NAV screen, press MENU to open the options menu. To change data fields highlight "change data fields" and press ENTER. Scroll to each individual field and press ENTER to open the drop down menu. Scroll through to highlight the desired field and press ENTER to set. When all fields have been changed, press QUIT to save all changes. Satellite Page: This page shows the number of satellites being received by the unit and which ones are coming into view. Trip Computer: It is recommended that the office defaults be left for this screen. At minimum Accuracy, Time, Bearing, Heading, Elevation, and Dist To Destination should be kept on all units. Compass: It is recommended this screen be left as set. Accuracy, Dist to Destination, Bearing, and Heading are most useful. Map: The map screen will be set to show map only.

SUBSECTION G.3.5 OPERATING THE GPS ON PLOT Carry extra batteries at all times. The two AA-alkaline batteries begin to lose power after approximately eight hours of use. See Section J Batteries, for more details. 1. Turn on the GPS unit 2. Check to see the satellite receiving status of the unit by pressing the PAGE key until the satellite status screen is visible. The satellite status screen shows two circles in the middle of the screen, and the satellite signal strength chart at the bottom. When the unit begins receiving satellites, the Acquiring Satellites message at the top will be replaced by the EPE and current UTM. 3. All recorded coordinates (UTM), elevation, number of readings, etc are entered under Plot Level Data (GPS Info) in the data recorder. If the coordinates are recorded at plot center, then azimuth and distance to plot center will be recorded as zero. See section H (Waypoints) below for a discussion of marking and averaging your location (LZ, RP, PC).

SECTION G.4 WAYPOINTS

SUBSECTION G.4.1 CREATING A WAYPOINT (WHEN COORDINATES ARE PROVIDED) A waypoint is a fairly precise location that a GPS user may assign a number and/or label to identify. For Pacific Islands PNW-FIA the location format is UTM/UPS (Universal Transerve Mercator/ Universal Polar Stereographic). This format requires this information: Zone- a 2 digit number (01-60) with a letter (C-X) attached. For our purposes, all zones in the western US will be any combination of the numbers 10,11 and letters U,T or S. Easting – a seven digit number (usually the first digit will be a zero) that represents distance form the eastern boundary of the particular zone. Northing also a seven digit number that represents distance north of the equator(northing numbers are usually instrumental in determining what zone the coordinates are in). To create a new waypoint with given UTM coordinates from existing plot data, turn on the GPS and then hold down the ENTER/MARK button. This will bring up the MARK screen with OK highlighted. Scroll up AYPOINTS until the waypoint number field is highlighted. Press ENTER to rename the waypoint [(ex. “12345NAV”) see

W

: below]. In naming the waypoint, add the letters NAV when using given coordinates from the folder data to distinguish from real-on-the- ground collected GPS points. Hit OK on the keypad screen when done. Highlight Location and press ENTER. Edit both lines of the location field by using the pop up keypad to edit the UTM field. When the coordinates are displayed correctly, highlight OK and press ENTER. Edit the Elevation field in the same manner. If you need to edit the icon, or note for a waypoint, use the UP/DOWN arrows to highlight the field you wish to change and press ENTER. Edit in same manner as just described.

Section G.4 pg.295 When you have entered all the necessary data, highlight the OK button (bottom right of screen), and press ENTER. (To navigate to a newly created waypoint, see section I below.)

SUBSECTION G.4.2 MARKING (STORING) CURRENT LOCATION AS A WAYPOINT Storing the location(s) of a vehicle, LZ, RP, or starting point, are good examples of how this feature can be used in the field. Stored waypoints can be useful for approaching plots from a different direction, taking a different route back to the LZ, or when lost (Section G.5, Navigating With The GPS). To start, verify that the unit is receiving strong signals by checking the Satellite screen. Wait until the EPE (estimated position error) is 70 feet or less. Hold down the ENTER/MARK button until the MARK screen appears. Before moving the GPS, allow the unit to average its current location. Scroll to the left and highlight AVG. Push ENTER to begin averaging. Once the EPE Measurement Count reaches 60, push and hold ENTER to save (no need to hold for the 60Csx); note the EPE before saving. The coordinates are now "locked in" and the GPS can be moved without fear of changing the coordinates. Next, edit the waypoint name (Subsection G.4.3, Naming Waypoints). Finally, scroll to the bottom of the screen and choose OK to save the new waypoint. Note: Prior to recording any coordinates, allow the GPS unit to average the waypoint. The GPS’s current location (under the assigned name), is now stored in its memory and can be used to navigate with.

SUBSECTION G.4.3 NAMING WAYPOINTS The Garmin waypoint name allows us up to 14 numbers/letters. The first five digits of the name should be the plot number displayed on the plot jacket (e.g., if the plot number is 30 then plot number is 00030). The next 2-3 digits would be NAV, LZ, TR, RP, PC, SP2, SP3, SP4, or OTH. When entering given coordinates (printed on the plot folder) as a waypoint for navigation, add the letters NAV to the waypoint name to distinguish the folder data from coordinates collected using the GPS unit (e.g., "12345NAV"). NAV: Navigation waypoints LZ/TR: Landing zone, or truck parking spot RP: Reference Point PC: Plot Center SP2: Subplot 2 SP3: Subplot 3 SP4: Subplot 4 OTH: Other - describe in GPS NOTES and on the plot card

SECTION G.5 NAVIGATING WITH THE GPS Appendix G: To begin navigation, a waypoint must be stored in the GPS unit (see Section G.4, Waypoints). A compass is needed (keep the compass away from the body of the GPS to keep it from affecting the magnetic accuracy). Once the unit has locked onto satellites, push the FIND button. Highlight Waypoints in the menu, and press ENTER. A list of user-stored waypoints appears. Scroll down through the list to find the name or number of the desired waypoint (e.g., a NAV waypoint as created in Section G.4). Highlight the desired waypoint and press ENTER. GPS OPERATING GUIDE If satellite signals are not being received, the GPS unit will display the bearing and distance to the waypoint from the last position the GPS unit obtained satellite signals. Move in the general direction of the waypoint until satellite signals are received; the GPS unit may need to remain in the same position for a few minutes to lock onto a signal. Once receiving satellites, highlight the GO TO tab on the bottom right of the screen to begin navigation. The map screen should appear, select the navigation screen desired by scrolling with the Page or Quit buttons. Follow the bearing using a compass; the distance should steadily decrease as you approach the waypoint. Eventually, the distance will get very small (about 10-30 feet) and the bearing will begin to jump around dramatically. This means the destination is very close (look for the stake and witness trees if the waypoint is subplot 1). pg.296 Other data displayed on the navigation screens: • Bearing - This is the direction to your destination from your present position, in degrees, from North. • Distance - This is distance (measured in the Nav Units selected in Setup) to your destination. • Heading - This is the direction you are moving (measured in degrees). When the heading and bearing are the same, you are traveling in a direct line to your destination. • Speed - This is the rate that you are traveling. The unit of measure is selected in Setup - Nav Units.

SECTION G.6 RECORDING GPS INFORMATION GPS information is recorded in the PDR (see Section 4.4, GPS COORDINATES). For Garmin GPSmap76Cx GPS receivers, record GPS UNIT TYPE code 2. The PDR requires that the number of averaged readings be entered. The Garmin GPSmap units uses a counter to record the number of readings. The update rate for this unit is approximately one reading each second. From the bottom of the Mark Waypoint screen, scroll to the left and highlight Avg. Press enter and the unit will begin to average the points location, this number will be displayed at the bottom as Measurement Count. When this number reaches 60, press ENTER again to continue with marking the waypoint. Enter the measurement count for the NUMBER OF READINGS (Item 4.4.3.12) in the PDR.

SECTION G.7 BATTERIES Garmin GPSmap units use two AA alkaline, NiMH, or lithium batteries. Battery status and signal strength can be checked in the status bar at the top of all MainMenu/Navigation screens. Replace the batteries when the Power Indicator is low (the GPS unit may have trouble locating satellites when the battery is low). Carry extra batteries at all times. The AA-alkaline batteries begin to lose power after approximately eight hours of use.

TION

RECORDING GPS INFORMA

:

Section G.6 pg.297 APPENDIX H LASER 200 INSTRUCTIONS

SECTION H.1 OVERVIEW Accurate heights are necessary in order to determine tree volume and for other uses. The laser can be used to get fast and accurate tree heights. It can also be used to measure distances and percent slope. This instrument is more fragile than the GPS units. Some precautions must be taken with the lasers to keep them working properly. These are: Never look at the sun through the scope. Looking directly at the sun can permanently damage your eyes. Never point the laser directly at the sun. Exposing the lens system to direct sunlight, even for a brief period, may permanently damage the laser transmitter. Do not expose the laser to extreme temperatures. It is rated for a temperature range of -22 to +140 degrees fahrenheit. Don’t leave the instrument in the vehicle during the heat of the day. Do not use batteries with “voltage check” features built on the batteries. The battery case of the laser is too narrow for these batteries, and they could get stuck in the instrument. Do not drop the laser. Immediately return it to its case when you get back to the vehicle. There is usually more danger of damaging the instrument in the vehicle than out in the woods.

SECTION H.2 BASIC OPERATION All directions for using the laser buttons are given assuming you are holding the instrument with the LCD display screen facing you and the 2 round lenses are facing the object you want to measure. The buttons will be referred to as: L1 - the left button closest to you L2 - the left button in the middle L3 - the left button furthest away from you R1 - the right button closest to you R2 - the right button in the middle R3 - the right button furthest away from you • Turn the laser on by pushing L1 or R1 • Turn it off by pushing L2 and L3 at the same time. The laser may turn itself off after a period of inactivity. Once the instrument is on, push the R1 button to make the red dot appear in the sighting scope. If there is no red sighting dot, repeatedly push the L2 button until the red dot appears and is the correct brightness. • To light up the display screen, press L3. Press L3 again to turn off the light. Appendix H: SECTION H.3 SETTINGS Make sure the settings are correct before using the laser. To set the correct measurement units, go into the main menu and: Step 1. Press R2 or R3 to scroll through the menu until SYS is displayed in the upper right hand corner

of the screen. LASER 200 INSTRUCTIONS Step 2. Press R1. ON or OFF will show in the center of the screen. FILTER will flash at the bottom. Step 3. Press R2 until OFFSET is flashing. The number displayed should be 0000.00. This means that the starting measuring point is the center of the instrument. Step 4. Press R2 until PIVOT is flashing. The number displayed should be 0000.59. When this number is set at 0.00, the laser is set to calculate heights using a tripod attached to the center of the instrument. The pivot point is the center of the laser. We use the pivot value at 0.59 because this sets the pivot point at the rear of the instrument, and this allows you to shoot a height while using your head as the pivot point. To change this number, press L1 until the number you want to change is flashing. Press L2 or L3 until the correct number is showing. When the number is set at 0000.59, press R1. Step 5. Press R2 until UNITS is flashing. Select F (feet) using the R1 button. pg.298 Step 6. Press R2 again and D (degrees) should be flashing. If not, press R1 to toggle on D. Step 7. Press R2 again and “%” should be flashing. It should say ON. If not, press R1. Step 8. Press R3 twice to accept the new settings and back out to the main display.

SECTION H.4 FILTER AND REFLECTORS When you are working in areas of dense brush, you need to make sure the laser is giving you the distance to the correct target. The best way to do this is to use a reflector as a target and use the filter option on the laser. The laser will only lock onto the highly reflective targets and ignore the less reflective brush. To use the filter option: Step 1. Place a reflector (or have someone hold it) on the tree where it can be seen from the required distance. The laser will not work in the filter mode without a reflector as a target. Step 2. Go to the main menu on the laser and push R2 or R3 until SYS is displayed on the screen. Step 3. Press R1 to select the SYS option. The FILTER option will blink, and it will say the FILTER is OFF or ON. Step 4. Push R1 to toggle FILTER between ON and OFF. Step 5. Press R3 to save the desired setting and to back out into the main display. When the FILTER is on, FILTER will appear at the bottom of the screen when the laser is measuring distances.

SECTION H.5 DISTANCE AND PERCENT SLOPE Horizontal distance (HD): Turn the laser on. The top-middle of the LCD screen will say HD. Point the red sighting dot at the target. Press R1 and hold it down until the laser locks on the target, then release. You can tell when the instrument locks onto its target by sound. It buzzes while it is searching for the target, then beeps when it locks on to a target or there is an error. If you get an error message, simply aim again and press R1. Slope distance (SD) and Vertical distance (VD): Push R2 or R3 until the correct display is shown. Then aim and press R1 until the laser locks on target. Or, measure a horizontal distance, then push R2 until the correct display is shown. Percent slope: Press R2 or R3 until INC is displayed. Then aim and press R1.

SECTION H.6 TREE HEIGHTS The best way to measure a tree height is to make sure you have a clear shot at the leader or a clear shot of the tree trunk. Make sure you are getting a distance to the tree trunk, and not some branches in front of it. If you can’t get a clear shot at the leader or the tree trunk, use a reflector (Section H.4). Once you are in position with your target in sight, go to the main menu: Step 1. Push R2 or R3 until HT is displayed in the upper left of the screen. Step 2. Push R1 once, aim at the target, then push R1 until the laser locks on target. This will measure the horizontal distance. Step 3. The down arrow will flash. Aim at the base of the tree and push R1 to get the percent slope. Step 4. The up arrow will flash. Aim at the top of the tree and push R1 again to get another percent slope. Step 5. Press R1 once more and the laser will display the height. Make sure this height is reasonable before recording it in the PDR.

SECTION H.7 GATES The gate option can extend the laser’s minimum range or restrict its maximum range. It is most often used to help you make sure you are hitting the right target when objects near you or just beyond your target

FILTER AND REFLECTORS

: might give you false readings. You don’t have to set both gates. You will probably only need to set the short gate because of brush or fog between you and your target. You can set a gate by shooting a target or by entering distances into the instrument. To set a short gate by laser, go to the main menu and: Step 1. Press R2 or R3 until GATE is shown on the display. Step 2. Push R1 to select the gate option.

Section H.4 pg.299 Step 3. Press R1 to toggle the gate between ON and OFF. Step 4. Push R2. The S indicator will flash. Step 5. Aim at a target that is at the distance you want to set as the short gate and press R1. Step 6. Now you can either set a long gate, or press R3 to go back to save the short gate and return to the main menu. The S will be displayed when you are measuring distances to show the short gate is on. To set a long gate: Step 7. Push R2. The L indicator will flash. Step 8. Aim at an appropriate target and press R1. Step 9. Press R3 to save the gate and go back to the main display. The L will be displayed when measuring distances. The gates are reset to OFF when the laser is turned off, but gate values are saved in memory. This means that if you have saved a gate and turn off the instrument, when you turn it back on the gate will be set to OFF. If you go back into the gate option and turn the gate ON, it will remember the last distances you shot for the long and short gates. To clear out a gate value: Display the gate values by following the instructions in this section. When the desired gate value is displayed, press and hold down R3 until the number is deleted.

SECTION H.8 CUMULATIVE DISTANCES A cumulative distance measurement allows you to move from one target point to the next, stopping at each one to measure the distance to the next target point. The laser accumulates the measured distances in both slope and horizontal distances (SD and HD) to give you a running total. To take a cumulative distance, go to the main menu and: Step 1. Press R2 or R3 until MULTI is displayed on the screen. Step 2. Press R1 to enter the MULTI option. DIFF will be displayed. Step 3. Press R2 once. CUM will be displayed. Step 4. Press R1. Either SEL or a number will be displayed. If SEL is displayed, HD will flash on and off. Press R1 to toggle between HD and SD. Press R2 when the correct indicator is flashing. If a number is displayed, that means there is already a cumulative distance saved on this instrument. You can either clear out this distance by holding down R3 until 0.00 appears, or continue to add to the distance by going to step 5. Step 5. Aim at the target and press R1 to fire the laser. Step 6. If you are not satisfied with the measurement, repeat step 5 to retake the measurement. If you are satisfied with the measurement, and wish to add it to your total, press R2. The new total will Appendix H: be displayed. Step 7. Repeat steps 5 and 6 to add more measurements to the total. You can choose whether you want horizontal or slope distances at any time. If a distance has been measured, you can change from slope or horizontal distance by pressing R3 twice. SEL will be displayed. Push R1 to toggle between SD and HD. Press R2 twice to get back to the total distance. Go to step 5 to add more distances. LASER 200 INSTRUCTIONS The cumulative measurement total is saved in memory even if the instrument is turned off. Turn the instrument on and scroll back to the MULTI-CUM option and resume the procedure with step 5. To clear out the current total and begin another series of measurements, hold down R3 while the cumulative distance is showing until the number is deleted. pg.300

CUMULATIVE DISTANCES

:

Section H.8 pg.301 APPENDIX I CRITERION RD 1000 ELECTRONIC RELASKOP USER GUIDE **See complete Criterion RD 1000 manual for additional information**

SECTION I.1 LOW BATTERY WARNING The RD 1000 monitors the incoming battery voltage. • When the voltage drops below 2.2V, the External LCD main display flashes “LobAt” every 5 seconds, alternating with the normally displayed information. • You should replace the batteries as soon as possible. • When the voltage drops below 2.0V, the “LobAt” message stops flashing and is displayed steady. At this point system operation is locked. • You must replace the batteries to return to normal system operation.

SECTION I.2 BUTTONS The RD 1000 has 11 buttons. Nine of these buttons are located on the keypad below the external LCD. The

TRIGGER button is located at your index finger on the front of the unit, and the Scale Adjust button is Appendix I: located at your thumb on the back of the unit. CRITERION RD 1000 ELECTRONIC RELASKOP USER GUIDE pg.302 SECTION I.3 KEY PAD Figure below shows the keypad. The table below describes the function of each button. EDIT Activates the edit function. ↑ UP System Menu: Toggles value. Edit function: Increases the digit value. HUD brightness: Increases the value. HUD When the Heads Up Display (HUD) is active, controls the in-scope LED. Short Press: Activates the in-scope LED and displays the brightness value. Long Press: Toggles the illuminated in-scope LED Measurement Bar Scale from Solid to Gap or Gap to Solid. BACK← System Menu: Moves to the previous menu item. Edit function: Moves to the previous digit (right to left). Measurement: Moves to the previous step. ENTER ↵ Confirms function. Selects value. FWD → System Menu: Moves to next menu item. Edit function: Moves to the next digit (left to right). MODE Moves through the operating modes. DOWN ↓ System Menu: Toggles value. Edit function: Decreases the digit value. HUD brightness: Decreases the value. Measurement result: Downloads data. POWER When unit is OFF: • Press and hold for a minimum of 2 seconds turns ON the unit. For a brief time, all segments are displayed followed by the firmware revision number, and then the unit is ready for use. • Press and Hold: external LCD shows all display segments (10 seconds maximum). When unit is ON: • Short press turns the display backlight ON/OFF. • Long press (2 seconds minimum) turns OFF the unit. To conserve battery power, if no button presses are detected for a period of 15 minutes, the RD 1000 automatically turns itself OFF.

KEY PAD

:

Section I.3 pg.303 SECTION I.4 OTHER BUTTONS Figure below shows the TRIGGER button and the SCALE ADJUST button. TRIGGER Short Press: (1) Activates the in-scope LED (stays lit for 30 seconds if no additional buttons are pressed). (2) Accepts in-scope target points (such as tree base, etc.). Press-and-hold: Activates the tilt sensor, and measurements are dynamically updated. Upon release, the inclination reading is locked. SCALE ADJUST (+) Increases the width of the illuminated in-scope LED Measurement Bar Scale. • Short Press: Increases the scale by one tick. • Press-and-hold: Continuously increases the scale width change. SCALE ADJUST (-) Decreases the width of the illuminated in-scope LED Measurement Bar Scale. • Short Press: Decreases the scale by one tick. • Press-and-hold: Continuously decreases the scale width change. Appendix I: SECTION I.5 DENDROMETER FUNCTIONS • Diameter Mode: Acquire a direct read-out of the height and diameter of a tree at any point (or multiple points) along the stem. • HT/Diameter Mode: Determine the height at which a specific target diameter is reached.

SUBSECTION I.5.1 DIAMETER MODE CRITERION RD 1000 ELECTRONIC RELASKOP USER GUIDE Refer to the instructions below to acquire a direct read-out of the height and diameter of a tree at any point (or multiple points) along the stem from any convenient distance away. 1. Press the MODE button until the external LCD displays the DIAMETER Mode Indicator, the HD Measurement Prompt (flashing), the appropriate Units Indicator ("F" or "M"), and the EDIT Function Indicator. This is prompting you enter the horizontal distance to the target tree. 2. Enter the horizontal distance. • Valid Values: 1.65 - 999.90 feet or 0.51 - 304.76 meters. • To automatically fill-in: Aim and fire your LTI laser range finder • to download the measured HD value into the numeric display. The display will automatically advance to the next step. • To manually enter: Measure the distance using a tape measure, press the EDIT button, and use the arrow buttons to edit the value. a. Press the UP or DOWN button to increase/decrease the value. b. Press the FWD or BACK button to move to next/previous digit. c. Press the ENTER button to accept the HD value. • If you want to re-enter the horizontal distance (either manually or with a laser), press the BACK button and enter a new HD value. 3. The external LCD displays the DIAMETER Mode Indicator, the ANGLE Measurement Prompt Indicator (flashing), the DEG Units indicator, and the message “bASE” is prompting you to take the base angle measurement to the tree. This message is also displayed in the numeric area of the in-scope LED. 4. Looking through the sighting scope, press-and-hold the TRIGGER button to activate the illuminated in- scope LED Measurement Bar Scale. 5. Aim to the base of the target tree, and release the TRIGGER button to lock the inclination measurement. pg.304 • The inclination appears in both the in-scope LED and the external LCD, and is continuously updated as long as you hold the TRIGGER button. • Upon release of the TRIGGER button, the in-scope LED flashes the locked inclination reading. 6. The external LCD displays the DIAM Measurement Prompt Indicator (flashing), the appropriate Units Indicator (“I” or CM”), and the EDIT Function Indicator prompting you to enter a diameter value. Enter or edit the diameter value. • Valid Values: 0.1 - 1400.0 inches or 0.3 - 3500.0 cm. • If a previous diameter value was measured in the Diameter Mode, this value will appear in the main display. If you want to use this diameter value, go to step #7. • To manually enter, press the EDIT button and use the arrow • buttons to edit the value. a. Press the UP or DOWN button to increase/decrease the value. b. Press the FWD or BACK button to move to next/previous digit. 7. Press the ENTER button to accept the diameter value. 8. Press-and-hold the TRIGGER button to activate the tilt sensor and track up the tree from the base. • The tree height is dynamically updated in both the in-scope LED and the external LCD. 9. When the horizontal aiming marks align with the edges of the target tree, release the TRIGGER button to lock the inclination measurement. • The tree height is shown in both the in-scope LED and external LCD. • To re-check or re-position the height measurement point, press and hold the TRIGGER again to activate the tilt sensor and view the updated height measurement. 10.Once the desired tree height is showing in the displays: • To download a serial data string through the serial port to an external data collector, press the DOWN button. The external LCD displays the DIAM Measurement Prompt Indicator (see step #6). • In most situations, you will find that the Gap Bar Scale works best in the Height/Diameter Mode. However, you can toggle the illuminated in-scope LED measurement scale from Solid to Gap

DENDROMETER FUNCTIONS

:

Section I.5 pg.305 SECTION I.6 ERROR CODES An error code will be displayed if the RD 1000 detects a problem with a measurement. Depending upon the current function, error codes are displayed in either the in-scope LED or the external LCD display. The table below lists and explains the possible error codes. Code Explanation Remedy E01 Unstable inclination value. The Steady the instrument before instrument is too unsteady to releasing the TRIGGER button. produce an accurate reading. E02 Calculation error. There was an Re-enter or re-shoot the data. error in performing an internal calculation caused by improper measurement geometry. Likely caused by a incorrectly entered data value, or an incorrect target shot from an external laser device. E03 Data communication error. There Verify that the laser and the RD 1000 was an error in a received serial are using the same units. data string from an external device. Verify the laser mode (it should be in HD or VD) and re-shoot. E04 System memory error. There was If the error persists, contact Laser some type of failure of the internal Technology, Inc. system memory. This represents a memory checksum failure of factory

stored parameters. Appendix I: E05 Data entry error. An improper · Check value and re-enter data. value was entered during a manual data edit operation (the entered data was outside of acceptable value limits). E06 Unable to display the input value · Re-enter data. in the in-scope LED or external · Hold the instrument within CRITERION RD 1000 ELECTRONIC RELASKOP USER GUIDE LCD. · tilt limits. Unable to display the calculated · Press the ENTER button to value. continue with the calculation. pg.306 : pg.307 APPENDIX J PLOT JACKET In this section, items that field crews are responsible for filling out are in bold and underlined. The plot jacket is used to store hard copies of all pertinent past and present information pertaining to an FIA plot. The outside cover contains labels with plot information, and inside contents include: plot card, edit sheet, past and present plot data printouts, landowner contact sheet and aerial photos, landowner permission letter (if needed), two new Digital Ortho Quad (DOQ) photos, an old DOQ or aerial photograph from previous visit, and a USGS map printout.The following provides a description of each part of a plot jacket and what is required of the field crew for plot completion.

SECTION J.1 PLOT LABELS

There is typically one label on the outside front cover of the plot jacket. The main label is located in the upper left hand corner of the plot jacket (see Figure J.1). It contains plot identification information such as: Plot Number, Reserved Status, County Code, Visit Year, Elevation, GPS Coordinates, Ownership, Figure J.1: Plot identification label Permission, IP on Figure J.2: Plot hazard report Property, and Owner Notification. A crew leader’s initials must be recorded in the upper right hand corner of this label to indicate that all edits are complete and the plot jacket is ready for QA review; this part must be completed for every plot.Another label containing a Plot Hazard Report may be present (see Figure J.2).

SECTION J.2 PLOT CARD The plot card is like a cover sheet containing many different pieces of information pertaining to an individual plot. A copy of the plot card can be found in Appendix L, Plot Forms.

SUBSECTION J.2.1 HEADER This is the box at the top of the plot card on the front side and contains the following parts: PLOT NUMBER, Island, start date, end date, crew leader (name and number); and crew member(s) (name and number). This part must be completed for every plot.

SUBSECTION J.2.2 RP DATA

This box is found directly under the header on the left side of the page and includes: species; diameter (to Appendix J: nearest inch); azimuth (from RP to PC); horizontal distance (to nearest foot); and, to subplot number. This item must be completed for all plots in which there is a reference point established and the data should match the plot printout and RP info on the back of the aerial photos.

SUBSECTION J.2.3 PLOT TRAVEL TIME

This box is located below the RP data box. It includes travel time to plot, measurement time, and travel time PLOT JACKET from plot. Travel time to plot should include the time it took to travel from the LZ/TR to the plot location and the travel time from plot should include the time it took to travel from the plot location back to the LZ/TR. Measurement time is the total number of hours spent working in the field on the plot regardless of the crew size (e.g., If it took four people 8 hours and 15 minutes to complete a plot in the field, then record 8:15). Note: These items are different than similar data items entered into the data recorder. This item must be filled out for every plot in which the crew occupied plot center. pg.308 SUBSECTION J.2.4 PLOT ACCESS DESCRIPTION This box is directly under the header and to the right of the RP data. Directions should be written so they are easy to read and understand, and include information that will aid future crews in relocating the plot. Directions must be filled out for every plot field visited (i.e., plot center occupied or nonforest/access denied/hazardous plots viewed from a distance). Directions should include the following: 1. Starting point: Select a permanent feature easily identifiable on the photos and on the ground. In most cases this will be a tree, but at times may include other features such as rock faces, stumps, logging road intersections, etc. 2. Identify the mode of travel (e.g., flying, driving, skiff, hiking). 3. Include the approximate distances of travel. 4. Give the direction of travel when turning onto a road or trail (e.g., ‘turn west [left] onto logging road and proceed’). Use compass references first in case the plot must be approached from a direction other than the way described. Wording such as left, right or straight should be included in parentheses. 5. Note all gates or other pertinent information that may aid future crews in re-locating the plot (e.g., there is an old road on the west [left] with a locked gate [contact BLM for combination]). 6. Describe any prominent features present in the plot area that are unlikely to change in the next ten years. Include details such as streams, rock outcrops, benches, man-made features, unusual or large trees, slope, aspect or topographic position. 7. If finding a place to park is difficult, provide directions for where to park the vehicle for road plots. This information can prevent numerous turn-arounds on potentially hazardous roads.

SUBSECTION J.2.5 PLOT NARRATIVE DESCRIPTION This is the box directly under RP data and plot access description and it provides a written description of the plot as well as relevant information to land owners, analysts, crew supervisors, crew leaders and QA inspectors. Analysts use it to provide an explanation for any major changes that have occurred since the previous inventory, especially those related to condition class attributes, as well as any anomalies in the data. They also use the historical information to better understand why the plot conditions are what they are today. Crew supervisors and crew leaders review previous narratives to determine the overall level of difficulty of a plot, anticipate access problems, and explain any oddities about previously collected data. QA inspectors review narratives as part of overall plot quality. This item must be filled out for every plot. The plot narrative should observe the following guidelines: • Writing must be clear and legible. • Describe species, stand structure, damages, etc., with words rather than using the corresponding data item codes. • Exclude unprofessional comments. Plot cards are public documents being scanned to electronic files available for viewing by anyone. They are also copied and mailed to the landowner upon request. • Transfer relevant information written on the outside of the plot jacket. Provide documentation for the following information in the order listed under each category. Accessible Forest Land 1. RESERVED STATUS – If it is classified as reserved write the name of the park, wilderness area, national monument, etc. (e.g., plot is located in Sequoia National Park). 2. Condition class – Write a description of each condition class present on plot. • Include changes to CONDITION CLASS STATUS (forest, nonforest, noncensus water, Census water, nonsampled). • Write a description of any changes to CONDITION CLASS STATUS since the previous visit (e.g., ‘at the previous inventory plot was called nonforest rangeland but now trees are

PLOT CARD

: regenerating and condition has 10 percent canopy cover; therefore it is now forest land’, or ‘at the previous inventory plot was accessible forest land, but has since been cleared for development’).

Section J.2 pg.309 • Stand description, including but not limited to, the following: age; stand size; physiographic information; tree species present; regeneration, including relative abundance and species; present and past treatments; present or past disturbances from insects, disease, weather, environment, human, etc.; and understory species of shrubs, forbs and graminoids using English or Latin names (codes change over time). • Pertinent information or plot anomalies – Describe any information pertinent to the plot including things that might not be represented in the data or errors made by the previous crew. 3. On remeasurement plots, if the crew determines there is a physical change to the previously mapped boundaries, describe why/how they have changed. 4. Ownership changes – If the owner has changed since the previous visit, note why (e.g., land swap, a park bought the land, last occasion had the wrong owner, etc.). 5. Hazards – Describe any human or environmental hazard[s] found on the plot (e.g., ‘subplot two has a bees nest near the microplot center’). 6. Inability to install any portion of the plot – These are typically human or environmental related and require an explanation as to why it was not installed. 7. Any deviation from prescribed monumentation – If unable to use monumentation described in the manual, explain why and what the crew did to work around the issue (e.g., ‘no squares, rounds, or DBH nails in trees per landowner’s request’, or ‘microplot 2 center fell on a large, sloped rock slab with no way to stabilize metal pin, instead used orange crayon to make a 2-inch circle with center dot showing where pin should have been’). Nonforest Land Describe the NONFOREST LAND USE class. Include a list of the species present on the condition and any disturbances that may have occurred since a previous visit, especially important if the condition was accessible forest land and is now nonforest. Note whether this condition has the potential to become forested in the future. If the entire plot is nonforest state whether plot center is occupied or viewed from a distance. If plot center was occupied and no pin was put in the ground, explain why. Field Visited With Marginal Canopy Cover Explain how the plot or condition did or did not meet the canopy cover requirement to meet the definition of forest land. If the subplot method was used to assess canopy cover and/or stocking, describe the details (including methodology for locating phantom subplots) and the results. Include the LIVE CANOPY COVER, LIVE PLUS MISSING CANOPY COVER, STOCKING PERCENT, STOCKING MAXIMUM DBH, and TOTAL STEMS (if applicable). Noncensus or Census Water State that the plot/subplot center (or the entire plot) lands in either noncensus or census water and provide a description of the body of water (e.g., lake, river, etc.). Nonsampled – Access Denied and Hazardous Access Denied and Hazardous Describe why the condition is non-sampled. If the condition is access denied, state this here and write the reason why, if given one by the landowner. If the condition is hazardous, explain why. Document attempted routes, unsuccessful hazard abatement strategies (e.g. different timing, resources, and/or special access such as boat/helicopter) and logic for making the hazardous determination. The hazard description (whether it applies to sole route to plot, entire plot itself, a subplot or a small condition on a plot) should be specific enough for any individual to Appendix J: clearly understand the hazard and to provide useful information for future crews. Special Studies If the plot is being completed as part of a special study, identify the name of the study early in the narrative. PLOT JACKET pg.310 SUBSECTION J.2.6 PLOT DIAGRAM This item is located in the box directly under the plot narrative on the right side. It contains a diagram of the plot layout. It is used as a tool to help relocate plots. Roughly sketch in condition class changes as they appear on the ground, landforms, hazards and any other pertinent information that could aid a future crew in relocating the plot. Include all condition classes along with stand size and forest type for each forest condition on the sketch map. If phantom subplots were installed to determine canopy cover or stocking, record the location of the phantom subplots on the diagram. Use the back of the Plot Card if extra space is necessary. This item must be filled out for every plot in which the crew occupies plot center.

SUBSECTION J.2.7 FIELD NOTES This box is located on the backside of the plot card. Provide any additional details pertinent to future field crews (e.g., waders are needed to cross the stream, there is another possible LZ located at a lower elevation, etc.). Continue the plot narrative description in this space (if necessary). This item should be filled out when there is good information to share and/or more space is needed.

SUBSECTION J.2.8 LOCATION This box is located at the bottom on the backside of the plot card. Draw a sketch of the area traveled during the day; include as many features as you can that will be helpful in navigation. Use photos and visible features in your sketch without making it confusing (e.g., ponds, slopes, cliff faces, openings). Include LZ/ TR, RP and PC in your sketch map. This item must be filled out for every plot on which the crew occupies plot center.

SECTION J.3 PHOTO WORK FORMATTING There are typically several different included in the plot jacket. Determine which photo is best to receive the reference point (RP)/plot center (PC) pinpricks; the best photo should include all necessary information for future crews to navigate successfully to the RP and PC. Occasionally, in the case of plot remeasurement, the newest photo will not be the best to use; in this situation, it is acceptable to reuse older photos. New orthophotos included in the plot jacket on remeasurement plots will have crosshairs indicating the expected location of the PC. On remeasurement plots, the crosshairs are most often positioned on the imagery using the previously collected GPS coordinates. However, sometimes the location of the PC indicated by the previous GPS coordinates differs from the PC location pinpricked by the previous crew. In these cases, the location of the crosshairs should be adjusted in the office to match the pinprick location of the previous crew. Crew leaders should check to ensure that the crosshairs on the new photo matches the location of the pinprick on the old photo before going out to the field. On new plot installations, the crosshairs will indicate the location where the plot should be installed. If using a new photo for a remeasurement plot, transfer the previous RP/PC pinpricks from the old photo; the pinprick must be transferred without error. Transfer the RP data to the new photo using the format shown in bullet 1 below (converted to English units). If the previous crew pinpricked the incorrect location, pinprick the RP/PC in the correct location. Note that the location of the crosshairs indicated on the photo might not necessarily coincide with the correct location of the plot on the ground; in these cases the correct location should be pinpricked on the photo. Notes on the back of the photo should be used to describe circumstances in which a different location was pinpricked than either the crosshairs on the photo or the previous crew's pinprick. Label the landing zone/vehicle-skiff parking with “LZ” or “TR” on the front of the photo; show any photo work calculations used to determine the locations of RP or PC on the back of the photo. The data written on the reverse of the photo should be in the following format: Both the RP & PC will be pinpricked and visible on the reverse. Each of these pinpricks should be circled and identified as either an RP or PC. If they are too close to each other to pinprick effectively, note this below the RP information. Write RP Information using the following format:

PHOTO WORK FORMATTING : RP Species = XXX Diameter = XXX (to the nearest inch) Azimuth = XXX Horizontal Distance = XXX (to the nearest foot)

Section J.3 pg.311 To Subplot = X (1, 2, 3, or 4) Notes: • Below the RP data, explain any special circumstances relevant future access, such as: distance/ azimuth determined by chaining or GPS; a “new RP was established” (remeasure only); features around the RP helpful in relocating it.

SECTION J.4 LANDOWNER PERMISSION LETTER Plots requiring permission will likely have some form of documentation in the plot jacket (e.g., the name and contact number of the person who granted permission). Review any documentation prior to visiting the plot to identify any special requests (calling before visit, photographs taken, minimal monumentation, etc.). Keep all documentation in the plot jacket when accessing the plot; it contains important information about landowner contacts and permissions. Appendix J: PLOT JACKET pg.312

LANDOWNER PERMISSION LETTER

:

Section J.4 pg.313 APPENDIX K REFERENCE FIELD TECHNIQUES

SECTION K.1 MEASURING HEIGHTS USING A CLINOMETER Tree heights can be measured using a clinometer and a measuring tape. The clinometer is only accurate if you use the HORIZONTAL DISTANCE from you to the tree when measuring a tree height. To calculate a tree height, walk away from the tree and find a spot at least 1 tree length away where you can see both the top of the tree and the base of the tree. If the tree is 50 feet tall, then you need to be at least 50 feet away from the tree when you measure the height. Walk uphill of the tree when measuring a height if possible. It is easier to see both the top of the tree and the base of the tree if you are up hill of it. Also, you do not have to walk as far away from the tree if you go uphill. Look through your clinometer with one eye, and keep the other eye open. Keep both eyes open, and look up until the top of the tree is even with the horizontal line in the center of the clinometer. When the horizontal line in the clinometer is even with the top of the tree, read the number on the % (percent) scale of the clinometer that is touching the horizontal line in the clinometer. The % scale is usually on the right side on the inside of the clinometer. If you are unsure which scale to use, look into the clinometer and then tilt the clinometer up or down until the % symbol is visible on the scale. Make sure you are far enough away from the tree so that your reading is not over 120%. The clinometer is not accurate when readings above 120% are used. Now look through the clinometer with both eyes open and tilt the clinometer down until the horizontal line in the clinometer is even with the base of the tree. Read the number on the % scale that is touching the horizontal line in the clinometer. The % scale of the clinometer is divided into 1% increments from 0 to + or – 70%. The distance between each small tic mark on the scale is equal to 1%. From + or – 70% and greater, the scale is divided into 2% increments. The distance between each small tic mark on this part of the scale is equal to 2%. Most of the time you will read a positive number (+) while looking at the top of the tree, and a negative number (-) while looking at the base of the tree. ADD the number you observed while looking at the top of the tree with the number you observed while looking at the base of the tree. This gives you Total Percent. Special Case: If you have to go down hill or very far uphill, you may read in your clinometer that both the top of the tree and the base of the tree are positive numbers on the % scale. Or you may have both the top of the tree and

the base of the tree are negative numbers. If the top of the tree and the top of the root collar are the same Appendix K: sign (either both are positive or both are negative) on the clinometer % scale, then SUBTRACT the tree top number and the root collar number. This gives Total Percent. Measure the horizontal distance between where you took the readings with the clinometer and the tree. If you went up or down a hill to measure the height, then you must calculate the horizontal distance (see next pageError! Bookmark not defined.)

Multiply the Total Percent for your tree times the horizontal distance you just measured or calculated. Then REFERENCE FIELD T divide this number by 100. This number is the height of your tree. ECHNIQUES pg.314 Example:

To calculate the height of this tree: (% Tree top) + or – (% Base of Tree) * (Horizontal Distance) 100% 88% + 20% = 108% (these 2 numbers are added, since tree top % is positive and tree base % is negative)

ANCE 108% * 30.4 feet = 3283.2 3283.2/100% = 32.8 feet is the height of this tree

SECTION K.2 CALCULATING HORIZONTAL DISTANCE When horizontal distance cannot be accurately measured it can be calculated by using percent slope, slope distance, and a slope correction table. To calculate horizontal distance, first measure the slope distance. Then use your clinometer to get a % slope. You should measure the % slope of the measuring tape. The

TING HORIZONTAL DIST TING HORIZONTAL clinometer should be at the level of your slope distance measuring tape. Use the Slope Correction Table (see Appendix #) to look up the expansion factor reciprocal for the % slope of the measuring tape. Multiply the expansion factor reciprocal by the slope distance you measured.

CALCULA : This gives you the horizontal distance. The horizontal distance will always be less than the slope distance.

Section K.2 pg.315 Example:

What is the horizontal distance from subplot center to this tree? Expansion Factor Reciprocal for 50% slope = 89 .89 * 25.0 = 22.25 feet The horizontal distance is 22.25 feet. This tree is within 24.0 feet of subplot center and is over 5.0 inches dbh, so it will qualify as a tally tree.

Slope distance = Horizontal distance when % Slope = 0

SECTION K.3 EXAMPLE OF BANYAN TREE MEASUREMENTS For trees with roots tall enough where it is unreasonable to measure dbh: Estimate one dbh, even if the tree is forked below 4.5 feet above the roots Appendix K: 4.5 feet with bracket from top of root collar to DBH = 18.5 feet (3.5 feet above top of root collar) Diameter is estimated with a relaskop, so Diameter Check = 1 Rooting height = 15 feet Type of rooting system = 1

Root diameter 1 = 46 feet REFERENCE FIELD T Root diameter 2 = 21 feet Prop root density = 1 Aerial root density = 0 ECHNIQUES pg.316

O

SECTION K.4 DETERMINING SCALES AND BASELINES FROM A MAP OR PHOTO

SUBSECTION K.4.1 DETERMINING SCALE MEASURING OBJECT OF KNOWN SIZE ON MAP OR PHOTO First you must measure the length of an object on the map or photo whose actual length you know. This might be a football field, a city block, or a section of a road. You need to go out to the location mapped or pictured and measure the distance between two identifiable objects. Once you have the two distances, you can find the scale For example, suppose you have a photo and you need to determine the scale of the photo. Find 2 points on

AND BASELINES FROM A MAP OR PHOT AND BASELINES FROM the ground that are visible on the photo and are easy to identify on the ground. Road intersections usually work well because they are usually easy to find on the photos and on the ground. Measure the horizontal distance between these 2 points on the ground (ground distance). Then measure the distance between the 2 points on the photo (photo distance). If the distance between the 2 points is 1,200 feet ground distance, and .4 inches photo distance, then the scale of the photos is calculated: 1,300 feet ground distance 12 inches (1,300 * 12) 15,600 ground x = = =1:39,000 .4 inches photo distance 1 foot .4 .4 map This means that 1 inch on the photo is equal to 39,000 inches on the ground. Since 1 foot = 12 inches, then 39,000 inches/ 12 feet = 3,250 feet. Therefore, each inch on the photo is equal to 3,250 feet on the ground.

DETERMINING SCALES

: One exception for aerial photos is that this method assumes the two locations are at the same elevation--or that the terrain is flat. If you are using aerial photos, the terrain may not be flat. If there are hills, even moderate ones, the calculations can be thrown off. Try to measure the distance between 2 points on the ground that are similar in elevation.

Section K.4 pg.317 SUBSECTION K.4.2 DETERMINING SCALE BY COMPARING WITH ANOTHER MAP OR PHOTO OF KNOWN SCALE Another way to calculate scale on an unknown map or photo is to compare it to a map with a known scale. For example, suppose you have an aerial photo where the distance between two hills is 3.12 inches. You have a map of the same area at 1:24,000, and on the map the distance between the hills is 1.3 inches. The answer involves a little algebra. Since the ground distance is the same on both photo and map, we can create an expression for this ground distance for both, and then put them on either side of an equation. The ground distance can be found by multiplying the map/photo distance by the scale (in this case, by the inverse of the scale--notice how this makes the units cancel correctly). We need to find, for the photo, how many ground units are represented by one unit on the photo, so we use an x for this unknown quantity and solve for it: x ground 24,000 ground 3.12 in photo x = 1.3 in map x ; and 1 photo 1 map

3.12 in x x ground = 1.3 in x 24,000 ground

1.3 in * 24,000 x= = 10,000 3.12 in The scale for the photo is 1:10,000

SUBSECTION K.4.3 CALCULATING A BASELINE ON A MAP OR PHOTO A baseline is often used in thick jungle where gps coordinates are difficult to obtain and/or navigation by using maps and aerial photography is difficult. A baseline is used to measure an azimuth and distance from a known point to the plot center. To calculate a baseline: 1. Determine the scale of the map or photo. 2. Measure the photo or map distance from a point of departure to the plot center. The point of departure is a know location that can be identified on the map or photo and can also be identified on the ground (a tree, intersection, house, etc). 3. Calculate the ground distance using the photo or map scale and the photo or map distance. For example: The photo scale is 1:12,000 The photo distance from the corner of a house to the plot center is 1.13 inches. The house must be

visible on the photo and identified on the ground. Appendix K: 12,000 ground 1.13 inches photo x = 13,560 inches ground distance 1 photo 1 foot 13,560 inches x = 1,130 feet ground distance 12 inches Therefore, you must measure 1,130 feet from the corner of the house to arrive at plot center.

The azimuth from the house to the plot center can be calculated by: REFERENCE FIELD T 1. Measure the azimuth between two points that are visible on the photos and the ground. Straight- line sections of road or power lines often work well for determining baselines. Shoot the azimuth down one side of the road. 2. Draw a line in pencil on the photo between the 2 points you just measured the azimuth between. Extend this line as far as necessary. 3. Find a place that can be identified on the ground and the photo from which you can measure azimuth and distance to find plot center. This is your point of departure. Draw a line between plot center and the point of departure. This is your baseline. Extend this line as far as necessary so that it intersects the line drawn previously in number 2. ECHNIQUES 4. Calculate the azimuth from the known point of departure and the plot center using a protractor and the line drawn in number 2. Adapted from Bryan Baker, Sonoma State University, Principles of map scale, www.sonoma.edu/GIC/Geographica/Mapinterp/ Scale.htm, January, 1999, January, 1999 pg.318

O

AND BASELINES FROM A MAP OR PHOT AND BASELINES FROM

DETERMINING SCALES

:

Section K.4 pg.319 APPENDIX L PLOT FORMS

SECTION L.1 PLOT LEVEL DATA Item 4.2.1.1 STATE OR COUNTRY Item 4.2.1.2 ISLAND Item 4.2.1.3 COUNTY Item 4.2.1.4 PLOT NUMBER Item 4.2.1.5 CYCLE Item 4.2.1.6 SUBCYCLE Item 4.2.1.7 FIELD GUIDE VERSION Item 4.2.1.8 PDR STARTING DATA RECORDER VERSION NUMBER Item 4.2.1.9 PDR ENDING DATA RECORDER VERSION NUMBER Item 4.2.1.10 DECLINATION Item 4.2.1.11 CHANGE MATRIX REQUIRED Item 4.2.1.12 P2 VEGETATION SAMPLING STATUS Item 4.2.1.13 LEVEL OF DETAIL Item 4.2.1.14 INVASIVE PLANT SAMPLING STATUS Item 4.2.1.15 INVASIVE PLANT SPECIMEN COLLECTION RULE Item 4.2.1.16 DWM SAMPLING STATUS Item 4.2.1.17 SURVEY GRADE GPS SUBPLOT ROVER FILES COLLECTED Item 4.2.1.18 YEAR OF PREVIOUS INVENTORY Item 4.2.1.19 MONTH OF PREVIOUS INVENTORY Section 4.3 Plot Level Data Collected in the Field Subsection 4.3.1 Crew Visit Information Item 4.3.1.1 SAMPLE METHOD CODE Item 4.3.1.2 QA STATUS Item 4.3.1.3 CREW NUMBER CREW NUMBER CREW NUMBER CREW NUMBER CREW NUMBER Subsection 4.3.2 Current Date of Inventory Item 4.3.2.1 YEAR Item 4.3.2.2 MONTH Item 4.3.2.3 DAY Subsection 4.3.3 Time Spent on Plot Item 4.3.3.1 TRAVEL TIME TO PLOT Item 4.3.3.2 MEASUREMENT TIME ON PLOT Item 4.3.3.3 TRAVEL TIME FROM PLOT Subsection 4.3.4 Plot Level Fundamentals Item 4.3.4.1 PLOT STATUS Item 4.3.4.2 PLOT NONSAMPLED REASON

Item 4.3.4.3 NONFOREST SAMPLING STATUS Appendix L: Item 4.3.4.4 NONFOREST PLOT STATUS Item 4.3.4.5 NONFOREST PLOT NONSAMPLED REASON Item 4.3.4.6 SUBPLOTS EXAMINED Item 4.3.4.7 SAMPLE KIND Item 4.3.4.8 PREVIOUS PLOT MAPPING OR CONDITION ERROR Item 4.3.4.9 PREVIOUS PLOT NUMBER PLOT FORMS Subsection 4.3.5 Additional Items Item 4.3.5.1 LANDOWNER PLOT SUMMARY REQUEST Item 4.3.5.2 TOPOGRAPHIC POSITION Item 4.3.5.3 HORIZONTAL DISTANCE TO IMPROVED ROAD Item 4.3.5.4 ROAD ACCESS Item 4.3.5.5 RECREATION USE 1 pg.320 Item 4.3.5.6 RECREATION USE 2 Item 4.3.5.7 RECREATION USE 3 Item 4.3.5.8 WATER ON PLOT Item 4.3.5.9 PLOT NOTES

Subsection 4.3.6 Reference Point Attributes Item 4.3.6.1 RP TYPE Item 4.3.6.2 RP SPECIES Item 4.3.6.3 RP DIAMETER Item 4.3.6.4 RP AZIMUTH Item 4.3.6.5 RP HORIZONTAL DISTANCE Item 4.3.6.6 RP AZIMUTH/DISTANCE TO SUBPLOT NUMBER Item 4.3.6.7 RP NOTES

Section 4.4 GPS Coordinates Subsection 4.4.3 GPS Unit Settings, Datum, and Coordinate System Item 4.4.3.1 GPS UNIT TYPE Item 4.4.3.2 GPS SERIAL NUMBER Item 4.4.3.3 GPS ENTRY METHOD Item 4.4.3.4 GPS DATUM Item 4.4.3.5 COORDINATE SYSTEM Item 4.4.3.6 GPS LOCATION TYPE Item 4.4.3.7 UTM ZONE Item 4.4.3.8 EASTING Item 4.4.3.9 NORTHING Item 4.4.3.10 GPS ELEVATION Item 4.4.3.11 GPS ERROR Item 4.4.3.12 NUMBER OF READINGS Item 4.4.3.13 GPS FILENAME Item 4.4.3.14 GPS NOTES

Subsection 4.4.4 Correction for Offset Location Item 4.4.4.1 AZIMUTH TO PLOT CENTER Item 4.4.4.2 DISTANCE TO PLOT CENTER

PLOT LEVEL DATA

:

Section L.1 pg.321 SECTION L.2 CONDITION CLASS Section 5.7 General Condition Class Attributes Item 5.7.0.1 CONDITION CLASS NUMBER Item 5.7.0.2 PREV CONDITION CLASS NUMBER Item 5.7.0.3 SUBPLOT CONDITION PROPORTION Item 5.7.0.4 CONDITION CLASS STATUS Item 5.7.0.5 PREV CONDITION CLASS STATUS Item 5.7.0.6 CONDITION CLASS STATUS RECONCILE CODE Item 5.7.0.7 CC STATUS PROCEDURAL CHANGE REASON CODE Item 5.7.0.8 NONFOREST CONDITION CLASS STATUS Item 5.7.0.9 NONFOREST CONDITION NONSAMPLED REASON Item 5.7.0.10 NONFOREST CC SAMPLING STATUS Subsection 5.7.1 Accessible Forest Land Delineating Data Items Item 5.7.1.1 RESERVED STATUS Item 5.7.1.2 PREV RESERVED STATUS Item 5.7.1.3 RESERVED STATUS RECONCILE CODE Item 5.7.1.4 RESERVED STATUS PROCEDURAL CHANGE RSN CODE Item 5.7.1.5 OWNER GROUP Item 5.7.1.6 PREV OWNER GROUP Item 5.7.1.7 OWNER GROUP RECONCILE CODE Item 5.7.1.8 OWNER GROUP PROCEDURAL CHANGE REASON CODE Item 5.7.1.9 FOREST TYPE Item 5.7.1.10 PREV FOREST TYPE Item 5.7.1.11 STAND SIZE CLASS Item 5.7.1.12 PREV STAND SIZE CLASS Item 5.7.1.13 REGENERATION STATUS Item 5.7.1.14 PREV REGENERATION STATUS Item 5.7.1.15 TREE DENSITY Item 5.7.1.16 PREV TREE DENSITY Subsection 5.7.2 Ancillary Item 5.7.2.1 OWNER CLASS Item 5.7.2.2 PREV OWNER CLASS Item 5.7.2.3 RESERVED AREA NAME Item 5.7.2.4 ARTIFICIAL REGENERATION SPECIES Item 5.7.2.5 PREV ARTIFICIAL REGENERATION SPECIES Item 5.7.2.6 STAND AGE Item 5.7.2.7 PREV STAND AGE Item 5.7.2.8 PHYSIOGRAPHIC CLASS Item 5.7.2.9 PREV PHYSIOGRAPHIC CLASS Appendix L: Item 5.7.2.10 DOMINANT TREE SPECIES 1 Item 5.7.2.11 PREVIOUS DOMINANT TREE SPECIES 1 Item 5.7.2.12 DOMINANT TREE SPECIES 2 Item 5.7.2.13 PREVIOUS DOMINANT TREE SPECIES 2 Item 5.7.2.14 DOMINANT TREE SPECIES 3

Item 5.7.2.15 PREVIOUS DOMINANT TREE SPECIES 3 PLOT FORMS Item 5.7.2.16 DISTURBANCE 1 Item 5.7.2.17 PREV DISTURBANCE 1 Item 5.7.2.18 DISTURBANCE YEAR 1 Item 5.7.2.19 PREV DISTURBANCE YEAR 1 pg.322 Item 5.7.2.20 DISTURBANCE 2 Item 5.7.2.21 PREV DISTURBANCE 2 Item 5.7.2.22 DISTURBANCE YEAR 2 Item 5.7.2.23 PREV DISTURBANCE YEAR 2 Item 5.7.2.24 DISTURBANCE 3 Item 5.7.2.25 PREV DISTURBANCE 3 Item 5.7.2.26 DISTURBANCE YEAR 3 Item 5.7.2.27 PREV DISTURBANCE YEAR 3 Item 5.7.2.28 TREATMENT 1 Item 5.7.2.29 PREV TREATMENT 1 Item 5.7.2.30 TREATMENT YEAR 1 Item 5.7.2.31 PREV TREATMENT YEAR 1 Item 5.7.2.32 TREATMENT 2 Item 5.7.2.33 PREV TREATMENT 2 Item 5.7.2.34 TREATMENT YEAR 2 Item 5.7.2.35 PREV TREATMENT YEAR 2 Item 5.7.2.36 TREATMENT 3 Item 5.7.2.37 PREV TREATMENT 3 Item 5.7.2.38 TREATMENT YEAR 3 Item 5.7.2.39 PREV TREATMENT YEAR 3 Item 5.7.2.40 CHAINING CODE Item 5.7.2.41 LAND COVER CLASS Subsection 5.7.3 Determining Condition Classes on Nonforest Land Item 5.7.3.1 PRESENT NONFOREST LAND USE Item 5.7.3.2 PREV NONFOREST LAND USE Section 5.8 Determination of Crown Cover Values for Land Use Classification Subsection 5.8.1 Introduction Item 5.8.1.1 CANOPY COVER SAMPLE METHOD Item 5.8.1.2 LIVE CANOPY COVER Item 5.8.1.3 LIVE PLUS MISSING CANOPY COVER Item 5.8.1.4 CURRENT AFFORESTATION CODE Item 5.8.1.5 PREVIOUS AFFORESTATION CODE Item 5.8.1.6 TOTAL STEMS

Subsection 5.10 Nonsampled Condition Class Attributes Item 5.10.0.1 CONDITION NONSAMPLED REASON Item 5.10.0.2 PREV CONDITION NONSAMPLED REASON Item 5.10.0.3 NONSAMPLED FOREST TYPE

Item 5.11.1.2 CONDITION CLASS NOTES

CONDITION CLASS Item 5.11.1.3 CHANGE MATRIX NOTES

:

Section L.2 pg.323 SECTION L.3 SUBPLOT INFORMATION Item 6.1.1.1 SUBPLOT NUMBER 1 2 3 4 Item 6.1.1.2 PREVIOUS SUBPLOT MAPPING ERROR Item 6.1.1.3 SUBPLOT STATUS Item 6.1.1.4 SUBPLOT NONSAMPLED REASON Item 6.1.1.5 NONFOREST SUBPLOT STATUS Item 6.1.1.6 NONFOREST SUBPLOT NONSAMPLED REASON Item 6.1.1.7 PREVIOUS SUBPLOT CENTER CONDITION Item 6.1.1.8 SUBPLOT CENTER CONDITION Item 6.1.1.9 SUBPLOT CONDITION LIST Item 6.1.1.10 MICROPLOT CENTER CONDITION Item 6.1.1.11 PREVIOUS MICROPLOT CENTER CONDITION Subsection 6.1.2 Physiographic Class Information Item 6.1.2.1 SUBPLOT SLOPE Item 6.1.2.2 SUBPLOT ASPECT Item 6.1.2.3 SUBPLOT SHAPE Item 6.1.2.4 SUBPLOT POSITION Item 6.1.2.5 SNOW/WATER DEPTH Item 6.1.2.6 SUBPLOT NOTES

Section 6.2 Pig Damage Item 6.2.0.1 SUBPLOT NUMBER OF PIG DAMAGE Item 6.2.0.2 CONDITION CLASS NUMBER OF PIG DAMAGE Item 6.2.0.3 PERCENT OF PIG DAMAGE ON SUBPLOT Appendix L: PLOT FORMS pg.324 SECTION L.4 BOUNDARY REFERENCES

Boundary #1 Item 7.2.2.1 SUBPLOT NUMBER 1234 Item 7.2.2.2 PLOT TYPE Item 7.2.2.3 PREV PLOT TYPE Item 7.2.2.4 BOUNDARY CHANGE Item 7.2.2.5 CONTRASTING CONDITION Item 7.2.2.6 PREV CONTRASTING COND Item 7.2.2.7 LEFT AZIMUTH Item 7.2.2.8 PREV LEFT AZIMUTH Item 7.2.2.9 CORNER AZIMUTH Item 7.2.2.10 PREV CORNER AZIMUTH Item 7.2.2.11 CORNER DISTANCE Item 7.2.2.12 PREV CORNER DISTANCE Item 7.2.2.13 RIGHT AZIMUTH Item 7.2.2.14 PREV RIGHT AZIMUTH Item 7.2.2.15 BOUNDARY NOTES

Boundary #2 Item 7.2.2.2 PLOT TYPE Item 7.2.2.3 PREV PLOT TYPE Item 7.2.2.4 BOUNDARY CHANGE Item 7.2.2.5 CONTRASTING CONDITION Item 7.2.2.6 PREV CONTRASTING COND Item 7.2.2.7 LEFT AZIMUTH Item 7.2.2.8 PREV LEFT AZIMUTH Item 7.2.2.9 CORNER AZIMUTH Item 7.2.2.10 PREV CORNER AZIMUTH Item 7.2.2.11 CORNER DISTANCE Item 7.2.2.12 PREV CORNER DISTANCE Item 7.2.2.13 RIGHT AZIMUTH Item 7.2.2.14 PREV RIGHT AZIMUTH Item 7.2.2.15 BOUNDARY NOTES

Boundary #3 Item 7.2.2.2 PLOT TYPE Item 7.2.2.3 PREV PLOT TYPE Item 7.2.2.4 BOUNDARY CHANGE Item 7.2.2.5 CONTRASTING CONDITION Item 7.2.2.6 PREV CONTRASTING COND Item 7.2.2.7 LEFT AZIMUTH Item 7.2.2.8 PREV LEFT AZIMUTH Item 7.2.2.9 CORNER AZIMUTH Item 7.2.2.10 PREV CORNER AZIMUTH Item 7.2.2.11 CORNER DISTANCE Item 7.2.2.12 PREV CORNER DISTANCE Item 7.2.2.13 RIGHT AZIMUTH Item 7.2.2.14 PREV RIGHT AZIMUTH Item 7.2.2.15 BOUNDARY NOTES

Boundary #4 Item 7.2.2.2 PLOT TYPE Item 7.2.2.3 PREV PLOT TYPE Item 7.2.2.4 BOUNDARY CHANGE

Y REFERENCES Item 7.2.2.5 CONTRASTING CONDITION Item 7.2.2.6 PREV CONTRASTING COND Item 7.2.2.7 LEFT AZIMUTH Item 7.2.2.8 PREV LEFT AZIMUTH Item 7.2.2.9 CORNER AZIMUTH BOUNDAR Item 7.2.2.10 PREV CORNER AZIMUTH

: Item 7.2.2.11 CORNER DISTANCE Item 7.2.2.12 PREV CORNER DISTANCE Item 7.2.2.13 RIGHT AZIMUTH Item 7.2.2.14 PREV RIGHT AZIMUTH Item 7.2.2.15 BOUNDARY NOTES

Section L.4 pg.325 SECTION L.5 TREE AND SAPLING DATA

Item 8.4.1.1 SUBPLOT NUMBER Item 8.4.1.2 TREE RECORD NUMBER Item 8.4.1.3 TREE TAG NUMBER Item 8.4.1.4 PREVIOUS TREE TAG NUMBER Item 8.4.1.5 CONDITION CLASS NUMBER Item 8.4.1.6 PREVIOUS CONDITION CLASS NUMBER Item 8.4.1.7 PREVIOUS TREE STATUS Item 8.4.1.8 PRESENT TREE STATUS Item 8.4.1.9 SUBPLOT TALLY TREE WITNESS Item 8.4.1.10 STANDING DEAD Item 8.4.1.11 RECONCILE Item 8.4.1.12 SPECIES Item 8.4.1.13 AZIMUTH Item 8.4.1.14 HORIZONTAL DISTANCE Item 8.4.1.15 SLOPE DIST TO WITNESS TREE OR OBJECT Subsection 8.5.3 Diameter at Breast Height Item 8.5.3.1 PREVIOUS DIAMETER AT BREAST HEIGHT Item 8.5.3.2 DIAMETER AT BREAST HEIGHT Subsection 8.5.4 Additional Diameter Data Items Item 8.5.4.1 DIAMETER CHECK Item 8.5.4.2 LENGTH TO DIA CHECK POINT Section 8.6 Root Measurements for Tropical Trees Item 8.6.0.1 TYPE OF ROOTING SYSTEM Item 8.6.0.2 NUM OF TREES IN SHARED ROOT SYSTEM Item 8.6.0.3 ROOT DIAMETER 1 Item 8.6.0.4 ROOT DIAMETER 2 Item 8.6.0.5 ROOTING HEIGHT Item 8.6.0.6 PROP ROOT DENSITY Item 8.6.0.7 NUMBER OF BUTTRESSES Subsection 8.7.1 Tree Length Item 8.7.1.1 PREVIOUS ACTUAL LENGTH Item 8.7.1.2 ACTUAL LENGTH Item 8.7.1.3 PREVIOUS TOTAL LENGTH Item 8.7.1.4 TOTAL LENGTH Item 8.7.1.5 LENGTH METHOD Item 8.7.1.6 PREVIOUS LENGTH METHOD Subsection 8.7.2 Tree Live Crown Measurements Item 8.7.2.1 COMPACTED CROWN RATIO Appendix L: Item 8.7.2.2 CROWN CLASS Item 8.7.2.3 BRANCHING CHARACTERISTICS Item 8.7.2.4 AERIAL ROOT DENSITY Subsection 8.8 Tree Damage Item 8.8.0.1 DAMAGE AGENT 1

Item 8.8.0.2 DAMAGE AGENT 2 PLOT FORMS Item 8.8.0.3 DAMAGE AGENT 3 Item 8.8.0.4 EPIPHYTE LOADING Item 8.8.0.5 PRIORITY DAMAGE Item 8.8.0.6 PRIORITY DAMAGE SEVERITY pg.326 Item 8.8.0.7 ROTTEN/MISSING CULL Subsection 8.8.1 Standing Dead or Removed Item 8.8.1.1 CAUSE OF DEATH Item 8.8.2.2 DECAY CLASS Section 8.9 Centroid/Second Diameter Item 8.9.0.1 LENGTH TO CENTROID DIAMETER Item 8.9.0.2 ACTUAL LENTH TO CENTROID DIAMETER Item 8.9.0.3 CENTROID DIAMETER ON UPPER BOLE Item 8.9.0.4 PREV SECOND DIAMETER ON UPPER BOLE Item 8.9.0.5 SECOND DIAMETER ON UPPER BOLE Item 8.9.0.6 PREVIOUS LENGTH TO SECOND DIAMETER

REE AND SAPLING DATA

T

:

Section L.5 pg.327 SECTION L.6 SEEDLING DATA Species CC # Subplot 1 CC # Subplot 2 CC # Subplot 3 CC # Subplot 4 Seedling count Seedling Count Seedling Count Seedling Count

Seedling Notes: Appendix L: PLOT FORMS pg.328 SECTION L.7 VEGETATION SPECIES COMPOSITION

SUBPLOT NUMBER 1 2 3 4 P2 VEG SUBPLOT SAMPLE VEG NONSAMPLED RESN SPECIES CODE

Condition Class 1 UNIQUE Sp NUMBER Sp CODE TYPE Sp CODE STATUS Sp OFFIC. COLLECTED Sp NOT COLLECTED RSN Sp LABEL NUMBER Sp GROWTH HABIT Sp VEGETATION LAYER Subplot 1 Sp CANOPY COVER VEGETATION Sp NOTES

CC2 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC3 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC4 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC5 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC1 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC2 Sp GROWTH HABIT Sp VEGETATION LAYER Subplot 2 Sp CANOPY COVER

CC3 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC4 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC5 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC1 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC2 Sp GROWTH HABIT Sp VEGETATION LAYER Subplot 3 Sp CANOPY COVER

CC3 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC4 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC5 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC1 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

CC2 Sp GROWTH HABIT Sp VEGETATION LAYER

ATION SPECIES COMPOSITION ATION Subplot 4 Sp CANOPY COVER

CC3 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

VEGET CC4 Sp GROWTH HABIT

: Sp VEGETATION LAYER Sp CANOPY COVER

CC5 Sp GROWTH HABIT Sp VEGETATION LAYER Sp CANOPY COVER

Section L.7 pg.329 SECTION L.8 VEGETATION STRUCTURE SUBPLOT 1 2 3 4 CONDITION CLASS NUMBER 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 TALLY TREE SP COVER LAYER 1 TALLY TREE SP COVER LAYER 2 TALLY TREE SP COVER LAYER 3 TALLY TREE SP COVER LAYER 4 TALLY TREE SP COVER-AERIAL VIEW NON-TALLY TREE SP COVER LAYER 1 NON-TALLY TREE SP COVER LAYER 2 NON-TALLY TREE SP COVER LAYER 3 NON-TALLY TREE SP COVER LAYER 4 NON-TALLY TREE SP COVER-AERIAL VIEW SHRUB AND WOODY VINE COVER LAYER 1 SHRUB AND WOODY VINE COVER LAYER 2 SHRUB AND WOODY VINE COVER LAYER 3 SHRUB AND WOODY VINE COVER LAYER 4 SHRUB AND WOODY VINE COVER-AERIAL VIEW FORB COVER LAYER 1 FORB COVER LAYER 2 FORB COVER LAYER 3 FORB COVER LAYER 4 FORB COVER—AERIAL VIEW GRAMINOID COVER LAYER 1 GRAMINOID COVER LAYER 2 GRAMINOID COVER LAYER 3 GRAMINOID COVER LAYER 4 GRAMINOID COVER-AERIAL VIEW MOSS/BRYOPHYTE COVER LAYER 1 VEGETATION SUBPLOT NOTES

SECTION L.9 INVASIVE SPECIES

Item 13.0.0.1 SUBPLOT NUMBER Item 13.0.0.2 SPECIES Item 13.0.0.3 SPECIES CANOPY COVER Item 14.2.1.1 SUBPLOT NUMBER 1 2 3 4 Item 14.2.1.2 INVASIVE PLANT SUBPLOT STATUS Item 14.2.1.3 INVASIVE PLANT NONSAMPLED RSN Appendix L: Item 14.2.1.4 INVASIVE PLANT DATA NOTES

Item 14.2.1.6 SPECIES CODE Item 14.2.1.5 CONDITION CLASS NUMBER 12345 12345 12345 12345 12345 Item 14.2.1.7 UNIQUE SPECIES NUMBER PLOT FORMS Item 14.2.1.8 SPECIES CANOPY COVER Item 14.2.1.9 INVASIVE PLANT NOTES pg.330 SECTION L.10 LOCATION RECORD

LOCATION RECORD

:

Section L.10 pg.331 Appendix L: PLOT FORMS pg.332

LOCATION RECORD

:

Section L.10 pg.333 APPENDIX M OWNER CONTACT

SECTION M.1 HELLO LETTER United States Forest Pacific Anchorage Forestry Sciences Lab Department of Service Northwest Anchorage, AK 99501 Agriculture Research 161 East 1st Ave, Door 8 Station (907) 743-9414 File Code: 4810 Date: Winter 2014

To Whom It May Concern:

Hello, we are researchers from the USDA Forest Service, Pacific Northwest Research Station. We are obtaining information on the forest resources of the Pacific Northwest from measurements taken on a large number of randomly located sample plots on forestland. We are visiting one of these plots in this general vicinity today.

We locate each plot from a sample selected on an aerial photograph. While at the site we record information pertaining to the type of terrain; tree species, heights, and diameters; insect and dis- ease damage; mortality and regeneration; and the amount and kind of understory vegetation. Many of our field plots were first established in the early 1960's and have been revisited on a 10-year cycle.

With the measurements we take, analysts will develop basic information about the amount, condi- tion, and change in the area's forest resource. Published reports contain data on forest land area and ownership, timber volume, forest growth, mortality and cut, potential productivity, and opportu- nities for silvicultural treatment.

If you are interested in learning more about our research plans, or care to see publications from previous inventories similar to this one, please contact Connie Hubbard at (907) 743-9541 by tele- phone or by writing to:

Anchorage Forestry Sciences Laboratory Forest Inventory and Analysis Program 161 East 1st Ave, Door 8 Anchorage, AK 99501

Sincerely, Appendix M:

Connie Hubbard

Alaska Data Collection Team Leader Forest Inventory and Analysis OWNER CONTACT Alaska Data Collection Team Leader pg.334 SECTION M.2 LANDOWNER CONTACT LETTER/DATA CONFIDENTIALITY United States Forest Pacific Forestry Sciences Lab Department of Service Northwest P.O. Box Agriculture Research Portland, OR 97208 Station (503) 808-2000 File Code: 4810 Date: Winter 2014

Dear

The Pacific Northwest Research Station is continuing to collect basic information about forest resources in Hawaii. The Forest Inventory and Analysis (FIA) Program at the station participates in a national effort to evaluate the status and condition of our nations forest ecosystems. Data is col- lected on FIA field plots so that we can determine the amount, condition and trends of Hawaii for- ested resources. The data will also allow us to detect and understand changes in local and regional forest health.

Data we collect from the field plot(s) on your property are combined with other plot data from adjoining areas and counties to provide information about resource conditions in the state of Hawaii. The data will not be identified in any way with your name or property and will have no bear- ing on your property taxes. Collected data are summarized, analyzed, and published in statistical and analytical reports for the United States, for Hawaii alone, and for various geographic areas within Hawaii and are available to the public.

Our records show that this year there is a field plot(s) that falls on your land. We request your per- mission to access your land to measure the trees and the vegetation on this plot. We only request your permission to access your land. We do not ask you to change your management practices, nor will our measurements affect any ongoing or planned activities for this site.

Our field staff will be in your area in 2014. If you wish, they will contact you before entering your land. We realize that working on your land is a privilege and we will respect your landowner rights at all times. We are prepared to honor any special conditions that you may require of us. Enclosed is a reply postcard for your response and any concerns, such as locked gates or other access prob- lems. If you have any questions regarding this letter or pertaining to this inventory, please feel free to contact Connie Hubbard at (907) 743-9541or [email protected].

We will be happy to share the resource information we gather from your property should you be interested.

ACT LETTER/DATA CONFIDENTIALITY ACT LETTER/DATA

Thank you again for your cooperation in this study. Your participation is greatly appreciated.

Gretchen Nicholas

Program Manager Forest Inventory and Analysis

LANDOWNER CONT

: Enclosure County ______Plot ______

Section M.2 pg.335 SECTION M.3 RELEASE United States Forest Pacific Forestry Sciences Lab Department of Service Northwest P.O. Box Agriculture Research Portland, OR 97208 Station (503) 808-2000 File Code: 4810 Date: Winter 2014 R E L E A S E

The USDA FOREST SERVICE assumes liability, pursuant to the Federal Tort Claims Act, for any damages caused by negligence of Forest Service personnel while upon the landowner’s property in connection with the inventory of forest resources in the State of Hawaii, and the landowner shall not be liable for injuries occurring to Forest Service personnel for any reason except the negligent or wrongful acts of the landowner while they are on the property owned or controlled by the land- owner.

County______

Plot Number______

Landowner______

Gretchen Nicholas

Program Manager Forest Inventory and Analysis Pacific Northwest Research Station US Department of Agriculture Appendix M: OWNER CONTACT pg.336 : pg.337 APPENDIX N EQUIPMENT CHECKLIST

SECTION N.1 DATA RECORDING ITEMS • Previous plot records and photos • Plot jacket (previous and current plot records with subplot diagrams, and field photos) • Hand-held data recorder downloaded with plot records; extra AA batteries • Handheld GPS unit with fully-charged batteries (bring extra batteries) • Survey Grade GPS unit (if needed on that plot for the day) • Mechanical pencils, red photo pen, black pen, eraser • Note pad(s) made of "write-in-the-rain" paper • Blank forms for plot, subplot, condition class attributes; tree tally; veg profile; and subplot diagram • Calculator(s) • Tatum • Field procedures manual • Plant ID guide(s), plant association guides, plant disease guide

SECTION N.2 PHOTO INTERPRETATION ITEMS • Plot (road) map • Stereoscope(s) (2x and/or 4x) with case and sharp straight pins • Photo scale (Timber Survey Aid #16) • 6 inch ruler calibrated in 1/20th inches • Hand lens

SECTION N.3 PLOT MEASURING ITEMS • Compass (es) • Clinometer(s) • Diameter tape(s)-20 foot • Increment borer(s) with sheath • 100 foot tape(s) with carabineer(s) • Hand axe(s) with sheath • Laser height/rangefinder • Plant press or plastic bags for plant specimens Appendix N: SECTION N.4 PLOT REFERENCING ITEMS • Steel plot pins • Aluminum nails • Tree number tags

• Square aluminum tags EQUIPMENT CHECKLIST • Round aluminum tags • Flagging tape

SECTION N.5 FIRST AID ITEMS • First aid kits • Bee sting kits pg.338 SECTION N.6 PERSONAL AND SAFETY GEAR • Canteens with water • Lunches • Utility pouch • Vest and hardhat • Rain gear • Gloves • Flashlight and batteries • Extra clothing • Extra food • Iodine tablets • Headlamps

SECTION N.7 CAMPING GEAR WHEN APPLICABLE: • Tarps • Extra water or water purifier • Stove with fuel and matches • Food • Cooking/eating dishes • Flashlight • Hammock tent • Camping backpack : pg.339 APPENDIX O SUMMARY OF MANUAL CHANGES 2015 to 2016 ISLANDS Manual* *2015 manual section/item numbers are listed Location Change Chapter: Plot Level Data 4.3.4.3 Nonforest Sampling Last sentence of description, updated NONFOREST LAND USE list Status included in measurable nonforest to 18-26 and 40-45. 4.3.4.8 Previous Plot Mapping or Updated description to clarify that previous condition error only includes Condition Error errors in PREVIOUS CONDITION CLASS STATUS, PREVIOUS RESERVED STATUS, or PREVIOUS OWNER GROUP. 4.4 GPS Coordinates Removed all reference to GPS UNIT TYPE = 1, as it is no longer a valid code. Removed GPS UNIT TYPE =1 from all when collected. 4.4.1 Survey Grade GPS Subplot Updated second sentence to, “This data item will be updatable, and may be Coordinates changed to 0 when no survey grade GPS subplot rover files can be collected on the plot.” 4.4.5.1 Previous UTM Zone Updated values to reference appendix. 4.4.5.4 Previous Coordinates Added code C, Hex center. Method Chapter: Condition Class 5.7.1.5 Owner Group Added, “Census Water (CONDITION CLASS STATUS = 4) is considered state owned and should be recorded as OWNER GROUP = 30.” 5.7.1.6 Previous Owner Group Updated when collected to, “When SAMPLE KIND = 2.” 5.10.0.3 Estimated Nonsampled Deleted data item. Land Cover Type 5.10.0.4 Nonsampled Forest Updated when collected to, “when CONDITION CLASS STATUS = 5” Type Chapter: Tree and Sapling Data Table 8.1 Where to Tally Trees Updated Microplot to include dead saplings. 8.4.1.13 Azimuth Deleted “live” regarding recording azimuth on the microplot (now includes dead). 8.4.1.14 Horizontal Distance Deleted “live” regarding recording azimuth on the microplot (now includes dead). 8.5.1 Marking Current Diameter Bullet 2: Updated snag diameter to 3.0 inches, from 5.0. 8.7.1.1 Previous Actual Length Updated standing dead diameter to 1.0 inches, from 5.0, in when collected. Appendix O: 8.7.1.3 Previous Total Length Updated standing dead diameter to 1.0 inches, from 5.0, in when collected. 8.7.1.6 Previous Length Method Updated standing dead diameter to 1.0 inches, from 5.0, in when collected. 8.8.0.5 Priority Damage Added code 9, Coconut Termite. 8.8.0.7 Rotten/Missing Cull Added explanatory text. Chapter: Invasive Plants Protocol Table 11.1 Invasive Species List Updated invasive species list for FSM. SUMMARY OF MANUAL CHANGES Appendix: Tree Species List Updated all tree species lists. Appendix: GPS Operating Guide Collecting a Subplot Rover File Number 10, updated file naming instructions to include QA plots. Number 15, removed instruction for entering azimuth and distance in rover files

Downloading the Rover Files Number 6, updated folder location. Deleting Subplot GPS Files Introduction, updated folder location. pg.340

: pg.341 APPENDIX P CORE 7.0 CHANGES Changes from the Phase 2 Field Guide version 6.1 to version 7.0. Core data item numbers used. 1.12 FIELD GUIDE VERSION. Changed Values from "6.0" to "7.0". 1.19.2 Collected Readings. Modified introductory text. 1.19.3 GPS UNIT. Deleted code 1 and modified text of codes 2, 3, and 4. 1.19.14 AZIMUTH TO PLOT CENTER. Modified the When collected from "When GPS UNIT = 1, 2, 3, or 4" to "When GPS UNIT = 2, 3, or 4". 1.19.15 DISTANCE TO PLOT CENTER. Modified the When collected from "When GPS UNIT = 1, 2, 3, or 4" to "When GPS UNIT = 2, 3, or 4". 1.19.16 GPS ELEVATION. Modified the When collected from "When GPS UNIT = 1, 2 or 4" to "When GPS UNIT = 2 or 4". 1.19.17 GPS ERROR. Deleted the following text: "As described in Section 1.19.2, make every effort to collect readings only when the error less than or equal to 70 feet. However, if after trying several different times during the day, at sev- eral different locations, this is not possible, record readings with an error of" and "071 to 999 if an error of less than 70 cannot be obtained". Modified the When collected from "When GPS UNIT = 1 or 2" to "When GPS UNIT = 2". 1.19.18 NUMBER OF READINGS. Modified the When collected from "When GPS UNIT = 1 or 2" to "When GPS UNIT = 2". 2.3.1 Forest Land. The page numbers associated with the attributes of interest were corrected for current content. 2.3.2 Nonforest Land. The page numbers associated with the attributes of interest were corrected for current content. 2.5.7 OWNER. This variable was deleted in version 6.0 but left as a placeholder until version 7.0. It is repeated here for the convenience of the user. All the variables after the deleted variable have been renumbered. 2.5.10 ADMINISTRATIVELY WITHDRAWN AREA NAME. Corrected this variable to be listed as CORE OPTIONAL. This correction is consistent with the intent of the original change proposal for version 6.0 (Reserve_AdminWithdrawn_Change_proposal2.doc) 5.0 Tree and Sapling Data. Introductory paragraphs. Added standing dead saplings to definition of tally sapling and modified the text to reflect this by changing "5.0 inches" to "1.0 inch". Also corrected the text in the first bullet under the paragraph starting "The following apply at remeasurement:" 5.1 SUBPLOT NUMBER. Modified the When collected for saplings. 5.2 TREE RECORD NUMBER. Modified the When collected for saplings. 5.4 AZIMUTH. Modified the When collected for saplings. 5.5 HORIZONTAL DISTANCE. Modified the When collected for saplings. 5.7 PRESENT TREE STATUS. Modified the When collected for saplings. Also modified the text of code 2 - dead tree, and the note listed under the list of codes. 5.7.1 RECONCILE. Modified the When collected for saplings. Also added a new table, which is an abbreviated table from appendix 8, describing how to tally standing dead saplings with respective PRESENT TREE STATUS, RECON- CILE CODE, and STANDING DEAD, which are being collected for the first time in Field Guide version 7.0. 5.7.1 RECONCILE. The following text was added to codes 3 and 4 in version 6.1 and repeated here for the conve- nience of the user: "Includes previously nonsampled subplots." 5.7.2 STANDING DEAD. Modified the descriptive text for saplings. Also modified the captions for figures 20-22 for saplings. 5.7.3 MORTALITY. Modified the text and the When collected for saplings. 5.8 SPECIES. Modified the When collected for saplings. 5.9 DIAMETER. Deleted the following text from the introductory text: "Macroplot tree diameter thresholds are deter- mined according to regional specifications (see regional field guides for more information)." Also modified the When Appendix P: collected and Tolerance for saplings. 5.9.2 DIAMETER AT BREAST HEIGHT (DBH). Corrected several figure references in the text. 5.12 DIAMETER CHECK. Modified the When collected for saplings. 5.14 TOTAL LENGTH. Modified the When collected for saplings. Also corrected the Values from "005 to 400" to "001 to 400". 5.15 ACTUAL LENGTH. Modified the When collected for saplings. Also corrected the Values from "005 to 400" to "001

to 400". CORE 7.0 CHANGES 5.16 LENGTH METHOD. Modified the When collected for saplings. 5.20.1 DAMAGE AGENT 1. The following text was added in version 6.1 and is repeated here for the convenience of the user: "Note: in some cases, thresholds for specific agents may be different from the threshold for the correspond- ing general agent. If a region is collecting a specific insect agent and no one is collecting the general agent, then the specific insect agent is collapsed into the general insect category 10000." Also, added text to the general agent col- umn for code 13000. 5.23 DECAY CLASS. Modified the text and the When collected for saplings. 8.0 Phase 2 (P2) Vegetation Profile (Core Optional). The introductory text was clarified. 8.3.2 LEVEL OF DETAIL. Modified the text in codes 2 and 3. pg.342 8.6.1 SPECIES GROWTH HABIT. The text was modified. All five codes were also revised. 8.6.4 SPECIES CANOPY COVER. The introductory text was modified. Appendix 1. State and County, Parish, or Borough FIPS Codes. Added the county codes for the following Pacific islands: 60 - American Samoa; 64 - Federated States of Micronesia; 66 - Guam; 68 - Marshall Islands; 69 - Northern Mariana Islands; and 70 - Palau. Appendix 2. FIA Forest Type Codes. Added code 988 and description. Modified code names of codes 982, 987, and 989 to match the names in the FIA database. Appendix 3. Made the following corrections to the species code list: FIA code Changes 6573 Changed common name from grapefruit to key lime 6574 Changed common name from citris xaurantium to sour orange 6575 Changed common name from shaddock to lemon 6576 Changed common name citron to grapefruit 6577 Changed common name from tangerine to sweet orange 7279 Corrected scientific name from Guajacum officianale to Guaiacum officianale 8750 Corrected common name from troipical almond to tropical almond Appendix 7. Tolerance/MQO/VALUE/Units Table. Updated this appendix based on changes in the rest of the docu- ment. Appendix 8. Tree Coding Guide. Updated this appendix for changes in sapling measurement. Appendix 11. Damage Codes. The following changes were made in version 6.1 and are repeated here for the conve- nience of the user. The sixth column heading was changed from New Category” to "General Category Designation". The following changes were made to the appendix: Code Old Threshold New Threshold Old REGION New REGION 11012 Any evidence of a NRS successful attack. 12005 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 12029 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 12047 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 12048 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 12068 Any occurrence NRS 12086 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 12136 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 12197 Any occurrence NRS 12200 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 13010 Any damage to the SRS terminal leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected

: pg.343 14001 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 14033 Any occurrence NRS 15001 Any damage to the terminal NRS leader; damage ≥20% of the roots, stems, or branches 15004 Any damage to the terminal NRS leader; damage ≥20% of the roots, stems, or branches 15026 (no change) SRS SRS; NRS 15031 Any damage to the terminal NRS leader; damage ≥20% of the roots, stems, or branches 15065 Any damage to SRS terminal leader; damage to > 20% of lateral shoots and buds 15088 Any damage to the terminal NRS leader; damage ≥20% of the roots, stems, or branches 17011 Any damage to the terminal NRS leader; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 22011 Any occurrence NRS 22075 Any occurrence NRS 22076 Any occurrence NRS 22002 Any visual evidence 22003 Any visual evidence 25022 Damage ≥20% of the PNW foliage with ≥50% of the leaf/needle affected 25057 Damage ≥20% of the NRS foliage with ≥50% of the leaf/needle affected 25072 Damage ≥20% of the NRS foliage with ≥50% of the leaf/needle affected

26002 Any occurrence on the bole PNW Appendix P: or stems (on multi-stemmed woodland species), or on branches ≤1 foot from boles or stems; damage to ≥ 20% of branches CORE 7.0 CHANGES pg.344 41001 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected. 41002 (no change) SRS SRS; PNW 41003 (no change) IW IW; PNW 41004 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected. 41005 (no change) IW IW; PNW 41006 (no change) IW IW; PNW 41007 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected 41008 Any damage to the terminal (no change) leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected.

: pg.345 41009 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected. 41015 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage > 20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥ 20% of the foliage with ≥ 50% of the leaf/needle affected. 90010 (no change) ALL IW; PNW; NRS Appendix 11. Damage Codes. The following damage codes were modified in version 7.0 according to the damage code change procedure. Changes to the damage code list were proposed according to the accepted procedure, and discussed and approved at the DAB meeting, Feb. 2015 in Portland, OR. Code Old Threshold New Threshold Old REGION New REGION 10016 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥20% of the foliage with ≥50% of the leaf/needle Appendix P: affected 11006 IW IW; NRS 11030 IW; SRS IW; NRS; SRS 14073 Any damage to the terminal PNW leader; damage ≥20% of the foliage with ≥50% of the leaf/ needle affected

21008 Any occurrence PNW CORE 7.0 CHANGES 21016 Any occurrence PNW 24006 Damage ≥20% dieback of crown PNW area 24010 Damage ≥20% dieback of crown PNW area pg.346 41013 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥20% of the foliage with ≥50% of the leaf/needle affected. 41014 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥20% of the foliage with ≥50% of the leaf/needle affected. 50020 Any damage to the terminal PNW leader; damage ≥20% of the roots or boles with >20% of the circumference affected; damage >20% of the multiple-stems (on multi-stemmed woodland species) with >20% of the circumference affected; >20% of the branches affected ; damage ≥20% of the foliage with ≥50% of the leaf/needle affected Appendix 14. FIA Pacific Islands Tree Species Codes. Added this appendix.

: pg.347 Glossary ACCESSIBLE FOREST LAND - LAND THAT IS WITHIN SAMPLED AREA (THE POPULATION OF INTEREST), IS ACCESSIBLE AND CAN SAFELY BE VISITED, AND MEETS THE FOLLOWING CRITERIA: THE CONDITION HAS AT LEAST 10 PERCENT CROWN COVER BY TREES OF ANY SIZE, OR HAS HAD AT LEAST 10 PERCENT COVER IN THE PAST. ADDITIONALLY, THE CONDITION IS NOT SUBJECT TO NONFOREST USE THAT PREVENTS NORMAL REGENERATION AND SUCCESSION SUCH AS REGULAR MOWING, GRAZING, OR RECREATION ACTIVITIES. ACRE - A UNIT OF LAND CONTAINING 43,560 SQUARE FEET OF AREA. AGE AT BREAST-HIGH - THE NUMBER OF ANNUAL GROWTH RINGS BETWEEN THE BARK AND THE CENTER OF THE TREE AT 4.5 FEET ABOVE THE GROUND ON THE BOLE OF A TREE. Agricultural land - Land managed for crops, pasture, or other agricultural use. Evidence includes geometric field and road patterns, fencing, and the traces produced by livestock or mechanized equipment. The area must be at least 1.0 acre in size and meet the minimum width requirement of 120.0 feet to qualify. Aspect - Compass direction that a slope faces. AZIMUTH - ANGLE OR DIRECTION FROM 1 TO 360 DEGREES. THE AZIMUTH PLUS 180 DEGREES IS THE BACK AZIMUTH. BASAL AREA - (A) OF A TREE: THE CROSS SECTIONAL AREA OF A TREE AT BREAST HEIGHT ON THE STEM. (B) OF A FOREST OR STAND: THE CROSS-SECTIONAL AREA AT BREAST HEIGHT OF ALL TREES WITHIN A UNIT OF AREA. BASAL AREA FACTOR (BAF) - THE BASAL AREA PER UNIT OF AREA CORRESPONDING WITH A GIVEN CRITICAL ANGLE IN VARIABLE-RADIUS PLOT SAMPLING. BLIND VARIANCE - A RE-INSTALLATION DONE BY A QUALIFIED INSPECTION CREW WITHOUT PRODUCTION CREW DATA ON HAND; A FULL RE-INSTALLATION OF THE PLOT FOR THE PURPOSE OF OBTAINING A MEASURE OF DATA QUALITY. THE TWO DATA SETS ARE MAINTAINED SEPARATELY. DISCREPANCIES BETWEEN THE TWO SETS OF DATA ARE NOT RECONCILED. BLIND VARIANCES ARE DONE ON PRODUCTION PLOTS ONLY. BOLE - TRUNK OR MAIN STEM OF A TREE. BORDERLINE TREE - A TREE THAT IS AT OR NEARLY AT THE LIMITING DISTANCE ASSOCIATED WITH A GIVEN BASAL AREA FACTOR. BORDERLINE TREES REQUIRED PRECISE CHECKING TO DETERMINE IF THEY ARE TO BE SAMPLED.: A TREE THAT IS AT OR NEARLY AT THE LIMITING DISTANCE ASSOCIATED WITH A GIVEN BASAL AREA FACTOR. BORDERLINE TREES REQUIRED PRECISE CHECKING TO DETERMINE IF THEY ARE TO BE SAMPLED. BREAST HEIGHT - THE STANDARD HEIGHT, 4.5 FEET ABOVE GROUND LEVEL, AT WHICH DIAMETER OF A STANDING TREE OR SNAG IS MEASURED. ON SLOPING GROUND, BREAST HEIGHT IS MEASURED ON THE UPHILL SIDE OF THE BOLE. CANKER - LOCALIZED INJURY TO STEM, BRANCH OR ROOT; CAUSED BY DISEASE OR INSECTS. CANOPY - THE COVER OF FOLIAGE FORMED BY TREE CROWNS. CANOPY CLOSURE - THE PERCENTAGE OF GROUND AREA COVERED BY THE VERTICALLY PROJECTED CROSS-SECTIONS OF TREE CROWNS CENSUS WATER - PERMANENT AREAS OF WATER MORE THAN 4.5 ACRES OR WIDER THAN 200 FEET. Certification plot - A plot installed by a certification candidate. It may be a training plot or a production plot. The candidate working alone installs the plot. CLINOMETER - AN INSTRUMENT USED TO MEASURE PER CENT SLOPE COLD VARIANCE - AN INSPECTION DONE EITHER AS PART OF THE TRAINING PROCESS, OR AS PART OF THE ONGOING QC PROGRAM. NORMALLY THE INSTALLATION CREW IS NOT PRESENT Glossary AT THE TIME OF INSPECTION. THE INSPECTOR HAS THE COMPLETED DATA IN-HAND AT THE TIME OF INSPECTION. THE INSPECTION CAN INCLUDE THE WHOLE PLOT OR A SUBSET OF THE PLOT. DATA ERRORS ARE CORRECTED. COLD VARIANCES ARE DONE ON PRODUCTION PLOTS ONLY. pg.348 CONDITION CLASS - CONDITION CLASS IS DEFINED BY DIFFERENCES IN CONDITION STATUS, OR IN ONE OF THE SIX MAPPING VARIABLES: RESERVED STATUS, FOREST TYPE, OWNER GROUP, STAND SIZE, REGENERATION STATUS, AND TREE DENSITY. CONIFER - CONE-BEARING TREES, MOSTLY EVERGREENS, WITH NEEDLE OR SCALE-LIKE LEAVES BELONGING TO THE BOTANICAL GROUP GYMNOSPERMAE. ALSO REFERRED TO AS SOFTWOODS. CONK - THE FRUITING BODY OF A WOOD-DESTROYING FUNGUS WHICH PROJECTS FROM THE TRUNK, ROOTS OR OTHER TREE PARTS. CROOK - ABRUPT BEND OR CURVATURE IN THE BOLE OF A TREE; A CROOK IS A SOUND CULL DEDUCTION FROM GROSS MERCHANTABLE VOLUME. CROWN - THE PORTION OF A TREE CARRYING THE MAIN BRANCH SYSTEM AND FOLIAGE. CROWN CLASS - THE SOCIAL POSITION OF A TREE RELATIVE TO ITS ABILITY TO RECEIVE DIRECT SUNLIGHT. CROWN RATIO - THE PERCENT OF A TREE'S TOTAL HEIGHT WHICH HAS A LIVE CROWN. CULL - (A) TREES OR LOGS, OR PORTIONS OF LOGS THAT ARE OF MERCHANTABLE SIZE BUT ARE UNUSABLE FOR INDUSTRIAL WOOD PRODUCTS DUE TO DEFECTS (ROT OR FORM). (B) TO CULL A LOG OR PORTION OF A LOG WITH RESPECT TO GROSS MERCHANTABLE VOLUME (C) THE DEDUCTION MADE FROM GROSS VOLUME OF A TREE OR LOG TO ADJUST FOR SOUND OR ROTTEN DEFECTS. CULL ROT - LOSS OF GROSS MERCHANTABLE VOLUME DUE TO ROT. VISUALLY INDICATED BY CONKS, ROTTEN SEAMS, ETC., CODED AS A CATEGORY OF PERCENTAGE OF VOLUME AFFECTED BY THE ROT. CULTURALLY-KILLED TREE - A TREE TALLIED OR RECONSTRUCTED AS LIVE AT OC3 BUT SINCE KILLED BY DIRECT HUMAN ACTIVITY AND NOT UTILIZED. THE TREE CAN BE STANDING, DOWNED, OR FELLED. INCLUDED ARE TREES KILLED BY LOGGING INJURY AND STILL STANDING. A TREE IS CULTURALLY-KILLED ONLY IF IT SHOWS NO SIGN OF LIFE OR IS PARTIALLY UPROOTED, LIVE, AND LEANS >45 DEGREES. CULTURAL NONFOREST STRINGER - NONFOREST AREA OF CONSTRUCTED ROADS, RAILROADS, POWER-LINES, PIPELINES, AND CANALS WHICH ARE 1.0 ACRES OR LARGER WITH NO MINIMUM WIDTH REQUIREMENT. DEAD TREE - A TREE TALLIED OR RECONSTRUCTED AS LIVE AT OC3 BUT NOW DEAD. DEATH WAS NATURAL AND NOT DUE TO DIRECT HUMAN ACTIVITY. A TREE IS DEAD ONLY IF IT SHOWS NO SIGH OF LIFE OR IS PARTIALLY UPROOTED, LIVE, AND LEANS >45 DEGREES. DEFOLIATOR - AN INSECT, WHICH FEEDS UPON, OR STRIPS LEAVES AND NEEDLES FROM TREES. DIAMETER - THE LENGTH OF A STRAIGHT LINE THROUGH THE CENTER OF AN OBJECT Diameter at breast height (DBH) - The diameter of the bole of a tree at breast height (4.5 feet above the ground), measured outside of the bark. DOMINANT TREE SPECIES - THE TREE SPECIES THAT IS THE MOST ABUNDANT AND NOT OVERTOPPED IN A CONDITION CLASS EPIPHYTE - A PLANT THAT USES A TREE FOR PHYSICAL SUPPORT, BUT WHICH DOES NOT DRAW NOURISHMENT FROM THE TREE EVEN-AGED STAND - A STAND IN WHICH INDIVIDUAL TREES ORIGINATED AT APPROXIMATELY THE SAME TIME. SPECIFICALLY, THE STAND MUST NOT BE CLASSIFIED AS NONSTOCKED, AND AT LEAST 70 PERCENT OF THE LIVE TREES PRESENT MUST BE WITHIN 30 YEARS OF ONE ANOTHER IN TOTAL AGE. FIELD GRID LOCATION - THE CENTER OF SUBPLOT 1 ON THE STANDARD PLOT LAYOUT. THE FIELD GRID LOCATION IS PINPRICKED ON PLOT PHOTOS IF THE PLOT WAS PREVIOUSLY VISITED; THIS INCLUDES ESTABLISHED PLOTS THAT CAN'T BE FOUND. THE FIELD GRID LOCATION IS PINPRICKED ON THE NEW PHOTOS FOR PLOTS THAT WERE NOT VISITED PREVIOUSLY.

Glossary pg.349 FIXED-RADIUS PLOT - A CIRCULAR SAMPLED AREA WITH A SPECIFIED RADIUS IN WHICH ALL TREES OF A GIVEN SIZE, SHRUBS, OR OTHER ITEMS ARE TALLIED. FORB - A BROAD-LEAVED HERBACEOUS PLANT AS DISTINGUISHED FROM GRASSES, SHRUBS AND TREES. FOREST TYPE - CLASSIFICATION OF A FOREST SITE BASED ON THE TREE SPECIES PRESENT, PLANT COMMUNITY, AND OTHER SITE CHARACTERISTICS. GROUND LAND CLASS (GLC) - A CLASSIFICATION OF LAND BY USE. THE MINIMUM AREA FOR CLASSIFICATION IS 1.0 ACRE. EACH MAPPED CONDITION CLASS REQUIRES A GROUND LAND CLASS. HARDWOODS - BROAD-LEAVED AND DECIDUOUS TREES AS OPPOSED TO HAVING NEEDLES. TREES BELONGING TO THE BOTANICAL GROUP ANGIOSPERMAE. HARVESTED TREE - A TREE TALLIED OR RECONSTRUCTED AS LIVE AND >5.O IN. D.B.H. AT A PREVIOUS INVENTORY, BUT SINCE HARVESTED FOR INDUSTRIAL SUPPLY, FIREWOOD, LOCAL USE, OR INCIDENTAL REASONS. HEARTWOOD - THE INNER, NONLIVING CORE OF WOOD IN A TREE BOLE, GENERALLY DARKER THAN SAPWOOD. HECTARE - A METRIC UNIT OF AREA EQUAL TO 10,000 SQUARE METERS. 2.47 ACRES. HORIZONTAL DISTANCE - THE AMOUNT OF SEPARATION BETWEEN TWO POINTS THAT IS MEASURED AS IF BOTH POINTS ARE ON THE SAME PLANE; HORIZONTAL DISTANCE MUST BE CALCULATED FROM SLOPE DISTANCE IF THE 2 POINTS CANNOT BE MEASURED ALONG THE SAME PLANE HOT VARIANCE - AN INSPECTION NORMALLY DONE AS PART OF THE TRAINING PROCESS. THE INSPECTOR IS PRESENT ON THE PLOT WITH THE TRAINEE AND PROVIDES IMMEDIATE FEEDBACK REGARDING DATA QUALITY. DATA ERRORS ARE CORRECTED. HOT VARIANCES CAN BE DONE ON TRAINING PLOTS OR PRODUCTION PLOTS. Improved pasture - Land that is currently maintained and used for grazing. Evidence of maintenance, besides the degree of grazing, includes condition of fencing, presence of stock ponds, periodic brush removal, seeding, irrigation, or mowing. Inclusion - An area that would generally be recognized as a separate condition, except that it is not large enough to qualify. For example, a ½ acre pond within a forested stand. INCREMENT - THE INCREMENT IN D.B.H. OF A TREE IN A SPECIFIED PERIOD OF TIME. INGROWTH TREE - A TREE THAT HAS GROWN PAST A DIAMETER THRESHOLD ON A FIXED- RADIUS PLOT SINCE PREVIOUS INVENTORY. INSPECTION CREW - A CREW OF QUALIFIED QC/QA INDIVIDUALS WHOSE PRIMARY RESPONSIBILITY IS THE TRAINING, CERTIFICATION AND INSPECTION OF PRODUCTION CREWS. MAINTAINED ROAD - ANY ROAD, HARD TOPPED OR OTHER SURFACES, THAT IS PLOWED OR GRADED PERIODICALLY AND CAPABLE OF USE BY A LARGE VEHICLE. RIGHTS-OF-WAY THAT ARE CUT OR TREATED TO LIMIT HERBACEOUS GROWTH ARE INCLUDED IN THIS AREA. MORTALITY TREE - SEE DEAD TREE. MYCELIUM - THE VEGETATIVE PART OF A FUNGUS; A MASS OF THREAD-LIKE FILAMENTS. NONFOREST INCLUSION - AN AREA THAT IS NONFOREST BUT LESS THAN 1.0 ACRE IN SIZE. WHEN PART OR ALL OF A FIXED OR VARIABLE-RADIUS PLOT FALLS WITHIN A NONFOREST INCLUSION, THE INCLUSION IS SAMPLED AS PART OF THE SURROUNDING FOREST LAND. NONSTOCKABLE - A FOREST LAND CONDITION CLASS IS NONSTOCKED IF: 1) THE AVERAGE DIAMETER OF LIVE TREES IN THE CONDITION CLASS IS <5.O IN. D.B.H. AND <100 FREE-TO-GROW SEEDLINGS AND SAPLINGS PER ACRE ARE DISTRIBUTED BROADLY ACROSS THE CONDITION

CLASS. OR: 2) THE AVERAGE DIAMETER OF LIVE TREES IN THE CONDITION CLASS IS >5.0 IN. Glossary D.B.H. AND TREE CANOPY COVER IS < 10 PERCENT. OR: 3) THE CONDITION CLASS WAS RECENTLY CLEARCUT AND HAS NOT BEEN REPLANTED. pg.350 PASTURE - PASTURE IS RANGELAND THAT HAS BE PLOWED AND ARTIFICIALLY SEEDED TO GRASS OR OTHER FORAGE SPECIES LIKE CLOVER TO FEED DOMESTIC LIVESTOCK. OFTEN, IT IS IRRIGATED AND FENCED. PI - PHOTO INTERPRETATION. PLOT CENTER (PC) - THE FIELD GRID LOCATION ON THE GROUND FOR EACH FIELD PLOT. ON ESTABLISHED PLOTS VISITED AT OC3, PLOT CENTER IS AT THE OC3 CEDAR STAKE. ON MISSING OR LOST PLOTS, PLOT CENTER IS THE PINPRICKED LOCATION ON THE OC3 PLOT PHOTOS. ON NEW PLOTS, PLOT CENTER IS THE PINPRICKED LOCATION ON THE OC4 PLOT PHOTOS. POLETIMBER - A TREE 5.0 TO 8.9 IN. D.B.H. POLETIMBER STAND - A STAND IN WHICH THE AVERAGE DIAMETER OF THE TREES PRESENT IS 5.0 TO 8.9 in. D.B.H. Production crew - A crew containing at least one certified individual. The crew is involved in routine installation and measurement of plots. PRODUCTION PLOT - A PLOT THAT BELONGS TO THE 6000-ACRE GRID DATABASE. IT MAY ALSO BE USED FOR TRAINING PURPOSES. RANGELAND - LAND DOMINATED BY NATURAL PLANT COVER COMPOSED PRINCIPALLY OF NATIVE OR EXOTIC GRASSES, FORBS, OR SHRUBS. NATURAL RANGELAND IS UNIMPROVED, I.E., IT IS NOT IRRIGATED, AND HAS NOT BEEN SEEDED ARTIFICIALLY. REFERENCE POINT (RP) - AN OBJECT (USUALLY A TREE), WHICH CAN BE LOCATED ON THE GROUND AND IDENTIFIED ON THE PHOTO. IT WILL BE TAGGED AND REFERENCED TO THE CEDAR STAKE IN ORDER TO FACILITATE RELOCATING THE PLOT. REGENERATION - A YOUNG, PRECOMMERCIAL-SIZED STAND, OR THE UNDERSTORY TREE COMPONENT OF A MULTISTORIED STAND. REGENERATION STATUS - A stand descriptor that indicates whether a stand has been naturally or artificially regenerated. REGIONAL DRIFT - THE TENDENCY FOR STANDARDS, METHODS AND INTERPRETATIONS TO DRIFT APART OVER TIME AS EACH UNIT IMPLEMENTS THE FIA CORE PROTOCOL. RELASKOP - AN INSTRUMENT USED TO ESTIMATE TREE DIAMETERS FROM A DISTANCE RELEASE - FREEING A TREE FROM IMMEDIATE COMPETITION BY REMOVING OTHER TREE OR NONTREE COMPETITION. RESIDUAL OVERSTORY - A TREE THAT HAS SURVIVED FROM THE PREVIOUS STAND AND IS USUALLY LARGER OR OLDER THAN TREES WHICH ORIGINATED AS PART OF THE PRESENT STAND. ROT - DECAY. DECOMPOSITION OF WOOD BY FUNGI OR BACTERIA. ROUGH CULL - PERCENTAGE DEDUCTION OF VOLUME LOST DUE TO BROKEN OR MISSING PARTS, FORKS OR CROOKS. ROUNDWOOD - SECTIONS OF TREE STEMS, WITH OR WITHOUT BARK. INCLUDES LOGS, BOLTS, POSTS, PILINGS AND OTHER PRODUCTS STILL "IN THE ROUND". Sapling - A tree 1.0 to 4.9 inches DBH. SAPWOOD - THE OUTER LAYERS OF WOOD BETWEEN THE HEARTWOOD AND INNER BARK. GENERALLY LIGHTER IN COLOR THAN HEARTWOOD. SAWTIMBER STAND, SMALL - A STAND IN WHICH THE AVERAGE DIAMETER OF THE LIVE TREES PRESENT IS 9.0 TO 21.0 IN. D.B.H. SAWTIMBER STAND, LARGE - A STAND IN WHICH THE AVERAGE DIAMETER OF THE LIVE TREES PRESENT IS GREATER THAN 21.0 IN. D.B.H. SDI - STAND DENSITY INDEX. SEEDLING - A LIVE TREE LESS THAN 1.0 IN. D.B.H. THAT IS AT LEAST 0.5 FEET IN HEIGHT (CONIFERS) OR 1.0 FEET IN HEIGHT (HARDWOODS) AND ESTABLISHED IN MINERAL SOIL.

Glossary pg.351 SEEDLING-SAPLING STAND - A STAND IN WHICH THE AVERAGE DIAMETER OF THE LIVE TREES PRESENT IS LESS THAN 5.O IN. D.B.H. SILVICULTURE - THE SCIENCE AND PRACTICE OF GROWING AND TENDING FOREST CROPS FOR SPECIFIED OBJECTIVES. SITE - THE AGGREGATE OF ALL ENVIRONMENTAL CONDITIONS AFFECTING THE SURVIVAL AND GROWTH OF A PLANT COMMUNITY ON A SPECIFIC AREA. SITE CLASS - A CLASSIFICATION OF POTENTIAL AVERAGE ANNUAL ABILITY OF A FOREST LAND SITE TO PRODUCE WOOD--FOR THE PERIOD BETWEEN THE TIME OF STAND ESTABLISHMENT AND THE TIME WHEN AVERAGE ANNUAL WOOD PRODUCTION PEAKS-- WERE THE SITE FULLY STOCKED WITH DESIRABLE TREES. SITE INDEX - A MEASURE OF PRODUCTIVITY INHERENT ON A FOREST SITE THAT IS SIMPLE NUMERICAL VALUE BASED UPON TREE HEIGHT AT A SPECIFIED AGE. SLOPE DISTANCE - THE AMOUNT OF SEPARATION BETWEEN 2 POINTS AS MEASURED ALONG AN INCLINE. SLOPE DISTANCE = HORIZONTAL DISTANCE WHEN THE % SLOPE BETWEEN THE 2 POINTS IS ZERO. WHEN MEASURING SLOPE DISTANCE FOR REFERENCE TREES, SLOPE DISTANCE IS MEASURED FROM THE HEAD OF THE NAIL AT THE BASE OF THE TREE TO SUBPLOT CENTER Softwoods - Coniferous trees, usually evergreen having needles or scale-like leaves. SNAG - A STANDING DEAD TREE. IN THE CURRENT INVENTORY, A SNAG MUST BE >5.O IN. DBH AND >4.5 FEET TALL, AND HAVE A BOLE WHICH DOES NOT TOUCH THE GROUND. A SNAG MAY BE EITHER SELF-SUPPORTED BY ITS ROOTS, OR SUPPORTED BY ANOTHER TREE OR SNAG. SPRIG - ANY WOODY OR NON-WOODY LATERAL GROWTH, WITHOUT SECONDARY BRANCHING, LESS THAN 1.0 INCH IN DIAMETER AT THE BASE ABOVE THE SWELLING AT THE POINT OF ATTACHMENT TO A BRANCH OR CROWN STEM. STAND AGE - THE TOTAL AGE OF A FOREST STAND THAT BEST CHARACTERIZED THE STAND. STANDS ARE EVEN- OR UNEVEN-AGED. STAND DENSITY INDEX - THE MAXIMUM NUMBER OF TREES PER UNIT AREA A FOREST SITE WILL SUPPORT WHEN THE STAND D.B.H. IS 10 INCHES RELATIVE TO THE MAXIMUM EXPECTED NUMBER IF THE SITE WERE CAPABLE OF SUPPORTING A NORMAL STAND. STANDING DEAD TREE - SEE SNAG. STAND SIZE - A CLASSIFICATION OF STANDS BASED ON TREE SIZE. STAND SIZES ARE LARGE SAWTIMBER, SMALL SAWTIMBER, POLETIMBER, AND SEEDLING-SAPLING STANDS. IF LESS THAN 10 PERCENT STOCKED WITH LIVE TREES, THE SITE IS CALLED NONSTOCKED. STOCKING - A QUALITATIVE EXPRESSION BASED ON COMPARING THE EXISTING NUMBER OF TREES PRESENT ON A FOREST SITE TO THE NUMBER NEEDED TO ACHIEVE THE MOST OPTIMAL GROWTH, VOLUME, OR VALUE POSSIBLE ON THE SITE. SUNSCALD - DAMAGE TO THE CAMBIUM CAUSED BY OVEREXPOSURE TO SUN. SWEEP - A BROAD ARC IN A BOLE OR LOG. A SOUND CULL DEFECT. TALLY TREE - A TREE, SAPLING, OR SEEDLING THAT IS SELECTED TO BE MEASURED ACCORDING TO THE RULES IN THIS MANUAL. TERMINAL LEADER - THE TOPMOST SHOOT OF A TREE. TRACHEID - PART OF WOOD STRUCTURE: A LONG, TUBELIKE CELL IN WOOD TISSUE. TRACKABLE TREE - A SAMPLED TREE THAT IS REFERENCED AND REMEASURED IN SUCCESSIVE INVENTORIES ON PERMANENT PLOTS. TRAINING PLOT - A PLOT ESTABLISHED FOR TRAINING OR CERTIFICATION PURPOSES ONLY. IT DOES NOT BELONG TO THE 6000-ACRE GRID DATABASE. Glossary TREE - A TREE IS A WOODY PLANT THAT HAS AN ERECT PERENNIAL STEM OR TRUNK AT MATURITY THAT IS AT LEAST 3.0 IN. DIAMETER AT BREAST HEIGHT (4.5 FEET) AND A TOTAL HEIGHT OF AT LEAST 12 FEET. (Ag. Handbook No. 541, 1979, ed., p. 3). pg.352 TWIG - ANY WOODY LATERAL GROWTH, WITH SECONDARY BRANCHING, LESS THAN 1.0 INCH IN DIAMETER AT THE BASE ABOVE THE SWELLING AT THE POINT OF ATTACHMENT TO A BRANCH OR CROWN STEM. UNEVEN-AGED STAND - A STAND THAT IS NOT CLASSIFIED AS NONSTOCKED AND THAT HAS LESS THAN 70 PERCENT OF THE TREES PRESENT WITHIN 30 YEARS OF ONE ANOTHER IN TOTAL AGE. WILT - DROOPING OF FOLIAGE; OFTEN A DISEASE SYMPTOM.

Glossary