Tran. a Et Al.Pdf

Total Page：16

File Type：pdf, Size：1020Kb

This may be the author’s version of a work that was submitted/accepted for publication in the following source: Tran, Alexandra, Isoardi, Gillian, & lsdale, Eric (2017) Exterior lighting of public stairways. In Proceedings of the Conference at the CIE Midterm Meeting 2017. CIE - International Commission on Illumination, United States of America, pp. 193-202. This file was downloaded from: https://eprints.qut.edu.au/114525/ c Consult author(s) regarding copyright matters This work is covered by copyright. Unless the document is being made available under a Creative Commons Licence, you must assume that re-use is limited to personal use and that permission from the copyright owner must be obtained for all other uses. If the document is available under a Creative Commons License (or other specified license) then refer to the Licence for details of permitted re-use. It is a condition of access that users recog- nise and abide by the legal requirements associated with these rights. If you believe that this work infringes copyright please provide details by email to [email protected] Notice: Please note that this document may not be the Version of Record (i.e. published version) of the work. Author manuscript versions (as Sub- mitted for peer review or as Accepted for publication after peer review) can be identified by an absence of publisher branding and/or typeset appear- ance. If there is any doubt, please refer to the published source. https://doi.org/10.25039/x44.2017.

Copy Link

Recommended publications

ABSTRACT the Main Feature of a Conventional Terraced Housing Development Is Rows of Rectangular Shaped Houses with the Narrow Fa
MAKING A RETURN ON INVESTMENT IN PASSIVE ARCHITECTURE TERRACED HOUSES DEVELOPMENT Wan Rahmah Mohd Zaki Universiti Teknologi Malaysia(UiTM) Malaysia E-mail: [email protected] Abdul Hadi Nawawi Universiti Teknologi MalaysiaQJiTM) Malaysia E-mail: [email protected] Sabarinah Sh Ahmad Universiti Teknologi MalaysiaQJiTM) Malaysia E-mail: [email protected] ABSTRACT The main feature of a conventional terraced housing development is rows of rectangular shaped houses with the narrow facade as the frontage. Consequently, this limits natural cross ventilation and daylight penetration into the middle of the houses; and cause for unnecessary energy consumption on mechanical cooling and artijicial lighting to make the living spaces comfortable for occupants. Such inconsideration is mainly attributed to the optimum configuration of houses which offers the most economic return desired by the developer. Passive Architecture (PA) design strategies can make terraced houses more conducive for occupants as well as gives reasonable returns to the developer. The idea is demonstrated on a hypothetical double storeys terraced scheme in a 2.5 acre site whereby it is transformed intofour types of PA terraced houses development. The Return on Invesfment of the PA terraced houses is ascertained for two situations, ie., (i) fwed sales price for all types of house; and (ii) added premium to PA terraced houses due to the positive unintended effects such as low density housing, etc. If critical criteria for demand and supply in housing remain constant, it is found that PA terraced housing development offers competitive returns to the developer relative to the returns for conventional terraced housing scheme. Keyworh: Orientation, Indoor Comfort and Operational Energy 1.0 INTRODUCTION 1.1 Housing and Energy The recent public awareness on sustainability calls for housing to not only serves as a basic shelter but also to be energy efficient, i.e., designed to make occupants need low operational energy.
[Show full text]
Office Lighting: a Review of 80 Years of Standards and Recommendations
LBL-35036 WG-31I Published in the Proceedings of the 1993 IEEE Industry Applications Society AnnUalMeeting, October 2-8, 1993 in Toronto, Ontario, Canada. Office Lighting: A Review of 80 Years of Standards and Recommendations Wemer K.E. Osterhaus Energy and Environment Division Lawrence Berkeley Laboratory University of California 1 Cyclotron Road Berkeley, Califomia 94720 May 1993 This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Building Technologies, Building Systems and Materials Division of the U.S. Department of Energy under Contract No. DE- AC03-76SF00098. Office Lighting: A Review of 80 Years of Standards and Recommendations . Werner K. E. Osterhaus Windows and Daylighting Group Building Technologies Program Energy and Environment Division Lawrence Berkeley Laboratory Berkeley, CA 94720 U.S.A. Abstract - This paper traces the development of Lighting conditions were among the dominant complaints quantitative office lighting standards from its from workers. Illuminating engineers recognized that beginnings to the present. It discusses the inadequate lighting was responsible for many industrial oources of recommended lighting practice, the accidents. Extensive data, accumulated by Simpson [i] and nature of the quantitative recommendations, and others provide convincing proof of this condition. The loss trends in recommended values on a comparative of visual power through improper lighting could not be so basis. A critical assessment of contemporary easily recorded, but ophthalmologists [2 and 3] warned about standards is provided within this historical its dangers. context. "Insufficient and improperly applied illumination is a prolific cause of industrial accidents. In the past few years I. INTRODUCTION numerous investigators, studying the cause of accidents, have found that the accident rate in plants with poor lighting is In exploring the development of lighting standards for higher than in similar plants which are well illuminated.
[Show full text]
Conserving Energy in Agricultural Lighting
INTRODUCTION lighting is needed in specific areas of agricultural Innovations in lighting technologies have operations, including offices and packing and greatly improved the efficiency of lighting fixtures processing areas. Lighting used to supplement or in transforming electricity into visible light. Energy replace natural light for plant growth has very savings in lighting are further facilitated by a specific requirements and is typically the most growing body of knowledge about the effects of intensive use of energy for lighting in agriculture. light intensity and quality on plants, animals and humans. In 2005, electricity consumption by US LIGHTING TYPES agricultural operations was approximately 0.14 There are many types of lighting. The most quadrillion BTU (6), driven chiefly by lighting- and commonly used lamps are incandescent, fluorescent ventilation-related energy expenditures in the and a variety of high intensity discharge lights. livestock and greenhouse sectors. As these sectors Halogen lamps are a type of incandescent lighting comprise a comparatively large proportion of New that is slightly more efficient than incandescent Jersey agriculture, conservation of energy in lamps, but typically more expensive to purchase. lighting is an excellent way for New Jersey farmers Fluorescent lamps may be linear or curved tubes or to save energy. small diameter compact bulbs (CFLs). High This document presents an overview of how intensity discharge (HID) lamps include low- energy is consumed in lighting and ways to pressure sodium (LPS), high-pressure sodium minimize its consumption. The most important (HPS), mercury vapor and metal halide. As light opportunity for energy savings in lighting, however, emitting diode (LED) technologies evolve, LEDs is the maximal use of ambient natural light, which are used more frequently in a variety of has little to no associated energy use.
[Show full text]
Our Guide to Barn Light Garage Lighting
OUR GUIDE TO BARN LI GHT GARAGE LIGHTING Garage lighting plays an important role in the overall exterior lighting plan for any home. The garage not only serves as the access point for many homeowners but is often the first structure visitors see as they approach the home. Stylish, easy-to-customize fixtures from Barn Light Electric oer plenty of illumination without harsh glare while adding the curb appeal you desire! SINGLE CAR GARAGE 1 2 3 4 5 #1: (2) Drake Gooseneck Lighst (14” Shades, 100-Black, G15 Gooseneck Arms, Cast Guard & Clear Glass), #2: (2) Original™ Warehouse Gooseneck Lights (18” Shades, 615-Oil-Rubbed Bronze, G22 Gooseneck Arms), #3: Goodrich® Marathon Porcelain Gooseneck Light (16” Shade, 150-Porcelain Black, G22 Gooseneck Arm), #4: (2) Chestnut Gooseneck Lights (16“ Shades, 995-Raw Copper, G15 Gooseneck Arms), #5: The Original™ Warehouse Gooseneck Light (14” Shade, 300-Dark Green, G15 Gooseneck Arm) What are the most popular Gooseneck Arms used for garage gooseneck lighting? Q Great question! We have more than 25 Gooseneck Arms and we’ve seen customers use A them all. However, our most popular gooseneck arms include: G22, G15, G11, G3 and G1. [email protected] (800) 407-8784 320 KNOX MCRAE DRIVE, Titusvi lle, FL 32780 barnlight.com 2-CAR GARAGE 1 For two-car garages, multiple options exist for lighting including one large fixture over each door, one large fixture between two doors, or smaller fixtures flanking the doors. Depending upon your taste, the amount of light can be manipulated with the type and wattage of bulb.
[Show full text]
Street Lighting Design Guidelines & Details
City and County of Denver Street Lighting Design Guidelines & Details Department of Public Works Engineering Division September 2019 City and County of Denver Street Lighting Design Guidelines Developed by: The City and County of Denver Public Works Department Clanton & Associates, Inc. Jacobs Engineering Group Copyright © 2019 City and County of Denver. All Rights Reserved. Reproduction of this document, in any form, without prior written permission from the City and County of Denver is strictly prohibited. Distribution of this document is strictly for use by and for business within the City and County of Denver, CO. 2 | Page City and County of Denver Street Lighting Design Guidelines Table of Content Background and Purpose .................................................................................................................................. 7 1.1 Typical Street Light Installations............................................................................................................. 7 Streetlight General Guidance ........................................................................................................................... 9 Fundamentals of Lighting Design ................................................................................................................. 11 3.1 Factors in Lighting Design ..................................................................................................................... 11 3.2 Non-Visual Effects of Light ...................................................................................................................
[Show full text]
Lighting for the Workplace
Lighting for the Workplace AWB_Workplace_Q_Produktb_UK.qxd 02.05.2005 10:35 Uhr Seite 3 CONTENTS 3 Foreword by Paul Morrell, 4–5 President of the British Council for Offices INTRODUCTION 6–7 The Changing Corporate Perspective 6–7 WORKPLACE LIGHTING – PAST, PRESENT AND FUTURE 8–51 Lighting Research versus the Codes 10–11 – The Lessons of Lighting Research 12–15 – Current Guidance and its Limitations 16–23 Key Issues in Workplace Lighting 24–29 Natural Light, Active Light & Balanced Light 30–37 Further Considerations in Workplace Lighting 38–47 Lighting Techniques – Comparing the Options 48–51 WORKPLACE LIGHTING – APPLICATION AREAS 52–97 Open Plan Offices 56–67 Cellular Offices 68–71 Dealer Rooms 72–75 Control Rooms 76–79 Call Centres 80–83 Communication Areas/Meeting Rooms 84–87 Break-Out Zones 88–91 Storage 92–93 Common Parts 94–97 WORKPLACE LIGHTING – LIGHTING DESIGN 98–135 Product Selector 100–133 Advisory Services 134–135 References & Useful Websites 135 IMPRINT Publisher: Zumtobel Staff GmbH, Dornbirn/A Design: Marketing Communication Reprints, even in part, require the permission of the publishers © 2005 Zumtobel Staff GmbH, Dornbirn/A Paul Morrell President of the British Council for Offices (BCO) London aims to continue being Europe’s leading financial centre and will need more, higher quality office space in the future (photo: Piper’s model of the future City of London, shown at MIPIM 2005) FOREWORD 5 The UK office market, in particular in London, is changing, driven by a number of long-term trends in international banking and finance. Informed forecasts, such as the recent Radley Report*, point, firstly, to a shift towards our capital city, at the expense of Paris and Frankfurt, as Europe’s leading financial centre, with a commensurate pressure on office space.
[Show full text]
Lighting Your House
LIGHTING YOUR HOUSE Lighting accounts for approximately 5 to 10 percent of your household energy bill. This amount may not seem like a lot, but it can add up quickly. Energy efficient lighting is easy and results in immediate energy savings to lower your bill. Light-emitting diodes (LEDs) Save the most money on energy costs, upwards of 75 percent. Additionally, they can last 20-30 times longer than incandescent bulbs. Their versatility allows them to be used in a variety of applications, including as outdoor and holiday lighting. POTENTIAL SAVINGS Check out the potential savings you can see by replacing just five of your more frequently used bulbs with energy efficient alternatives. TYPE OF BULB Incandescent (60W) CFL (13W) LED (10W) $2.50 $10.00 $15.00 Approximate Cost (5 bulbs at $0.50 each) (5 bulbs at $2.00 each) (5 bulbs at $3.00 each) Life Span When Used 3 Hours/Day, 7 Days/Week ~10 months ~9 Years, 1 month ~22 years, 9 months Number of Bulbs Needed 125 13 5 in LED Life Span Yearly Electricity Cost (11.3¢/kWh) $37.12 $8.04 $6.19 Lifetime Savings with LED $756 $62 - - - 1 LIGHTING YOUR HOUSE RECYCLE BULBS Check you local waste and recycling department. To find other recycling centers near you, visit the Earth911 website. LIGHTING LINGO Now that we know the current state of light bulbs, it is important to understand their terminology. Two critical features to keep in mind are watts and lumens. Watts (W): The amount of energy a bulb uses to produce light, or how much energy the bulb consumes.
[Show full text]
Efficient Lighting Design and Office Worker Productivity
Efficient Lighting Design and Office Worker Productivity Carol Jones and Kelly Gordon, Pacific Northwest National Laboratory1 ABSTRACT Energy efficiency advocates have long known the importance of ancillary or non-energy benefits in achieving market transformation. Energy efficiency measures must meet a range of needs and business objectives to have an enduring impact. New research presents an exciting value proposition for commercial office buildings. A recent in-depth study of lighting quality and office worker productivity shows that realistic changes in lighting can measurably increase worker comfort, motivation, persistence and vigilance. The research points to two profound market opportunities that deserve serious attention by the energy efficiency community. The first paradigm shift is from standard direct-only troffers to task-ambient lighting. Energy savings result from an optimized lighting layout with lower ambient light levels in the room, the use of task lighting where needed, and more efficient components (for example, T5 linear fluorescent lamps and high performance T8 lamp-ballast systems). The second paradigm shift is to workstation-specific personal control using “intelligent”2 technologies. Dramatic energy savings result from fewer fixtures overall, occupancy sensors tuned to individual workstations, daylight dimming at the perimeter, peak load demand response, and personal control by the user. This paper provides an overview of the research findings that will be used as the basis for changing customer buying behaviors and a recipe for success for lighting solutions that will yield both energy savings and non-energy benefits. The lighting energy savings of these new systems compared to strategies of the past is analyzed, along with a recommended market penetration strategy using market research and the dynamics of the construction market.
[Show full text]
Fact Sheet: High-Rise and Low-Rise Multifamily 2016
2016 ENERGY CODE Residential and Nonresidential Ace Title 24, Part 6 Resources Fact Sheet High-Rise and Low-Rise Multifamily What is High-Rise and Low-Rise Multifamily? Multifamily buildings contain multiple dwelling units that share common walls and may also share common floors or ceilings. Hotel and motel buildings are not considered multifamily. Building type, and the number of habitable stories in a multifamily building dictates whether it is considered “high-rise” or “low-rise”- and which of the Title 24, Part 6 Building Energy Efficiency Standards (Energy Standards) requirements apply to it. Multifamily buildings with four or more habitable stories are considered high-rise, while buildings with three or fewer habitable stories, and duplexes and townhomes are considered low-rise. Why? When applying the Energy Standards, it is important to properly identify the project as low-rise or high-rise multifamily. Multifamily projects are complicated because a mixture of nonresidential and residential requirements apply based on the space types within the building. In addition, there are specific high-rise residential requirements for some Prescriptive requirements. See Table 1 for a summary of which sections in the Ener- gy Standards apply to multifamily building types. 2016 California Building Energy Efficiency Standards Project Type Requirement Type Relevant Sections All Occupancies Scope, Definitions and Rules All occupancies 100.0-100.2 of Construction Mandatory Requirements All occupancies 110.0-110.11 Low-Rise Residential Common Area
[Show full text]
LIGHTING DESIGN in COMPUTERISED OFFICES Annika Kronqvist
THESIS FOR THE DEGREE DOCTOR OF PHILOSOPHY LIGHTING DESIGN IN COMPUTERISED OFFICES Annika Kronqvist Department of Architecture CHALMERS UNIVERSITY OF TECHNOLOGY Göteborg, Sweden 2012 /LJKWLQJGHVLJQLQFRPSXWHULVHGRIÀFHV © Annika Kronqvist Göteborg 2012 ISBN 978-91-7385-746-8 Doktorsavhandlingar vid Chalmers tekniska högskola Serie Nr 3427 ISSN 0346-718X Tryck: Chalmers Reproservice Göteborg, Sweden 2012 /LJKWLQJ'HVLJQLQ&RPSXWHULVHG2IÀFHV ANNIKA KRONQVIST Department of Architecture, Chalmers University of Technology ABSTRACT 7KLV WKHVLV LV FRQFHUQHG ZLWK WKH GHVLJQ RI WKH DUWL¿FLDOO\ OLJKWHG HQYLURQPHQWLQFRPSXWHULVHGRI¿FHV7KHDLPLVWRHVWDEOLVKZKLFKNLQGRI OLJKWLQJVROXWLRQLVEHVWVXLWHGWRDFFRPPRGDWH9'7EDVHGWDVNVDQGZKHWKHU RU QRW ZRUNLQJ LQ IURQW RI D 9'7 DIIHFWV YLVXDO FRPIRUW DQG ZHOOEHLQJ. 7KH UHVHDUFK TXHVWLRQ KDV EHHQ DSSURDFKHG LQ IRXU GLIIHUHQW VWXGLHV 7KH VWXGLHV ZHUH DV IROORZV $ TXHVWLRQQDLUH VWXG\ ZKHUH OLJKWLQJ GHVLJQHUV LQ 6ZHGHQ HYDOXDWHG GLIIHUHQW OLJKWLQJ FULWHULD 7KLV DLPHG WRHVWDEOLVKKRZGLIIHUHQWFULWHULDDUHXVHGLQWKHRIILFHOLJKWLQJGHVLJQ SURFHVV $Q H[SHULPHQWDO VWXG\ FRPSDULQJ WKH LQÀXHQFH RI GLIIHUHQW RI¿FHOLJKWVHWWLQJVRQSHUFHSWLRQV7KHVWXG\IRFXVHGRQWKHLPSDFWRIOLJKW VHWWLQJRQURRPSHUFHSWLRQWKHH[SHULHQFHRIWKHOLWHQYLURQPHQWSHUFHLYHG YLVXDOFRPIRUWDQGZHOOEHLQJ$GGLWLRQDOO\WKHVWXG\ORRNHGLQWRDOHUWQHVV DV LQGLFDWHG E\ KRUPRQH VDPSOHV DQG LQWR WKH LQÀXHQFH RI OLJKWLQJ RQ SHUIRUPDQFH $FRPSDULVRQRIWKHYLVXDOSHUFHSWLRQVLQDQ/('OLJKW VHWWLQJ WR WKH SHUFHSWLRQV H[SHULHQFHG LQ D FRQYHQWLRQDO OLJKW VHWWLQJ $ UHYLHZ GHVFULELQJ UHVHDUFK UHODWHG WR
[Show full text]
Article 2.1 Single Family Residential Districts
Article 2.1 Single Family Residential Districts Sections 2.101 Purposes 2.102 Single Family Residential Districts 2.103 Land Use Regulations 2.104 Lot Development Regulations 2.105 Site Development Regulations, Nonresidential Uses in Residential Districts 2.106 Additional Development Regulations 2.107 Additional Use Regulations 2.101 Purposes The purposes of single family residential districts established in this article are to: A. Provide for single family residential uses in appropriate locations; B. Provide for a variety of single family residential densities; C. Establish reasonable regulations to create and preserve livable neighborhood; and D. Provide for appropriate transitions to other residential and nonresidential uses. 2.102 Single Family Residential Districts The single family residential districts are: Single Family-43 (SF-43). This district permits single family housing on lots of at least 43,000 net square feet. Single Family-35 (SF-35). This district permits single family housing on lots of at least 35,000 net square feet. Single Family-15 (SF-15). This district permits single family housing on lots of at least 15,000 net square feet. Single Family-10 (SF-10). This district permits single family housing on lots of at least 10,000 net square feet. Single Family-8 (SF-8). This district permits single family housing on lots of at least 8,000 net square feet. Revised 12-6-18 Chapter I, Article 2.1 Single Family Residential Districts Page 1 Town of Gilbert Land Development Code Single Family-7 (SF-7). This district permits single family housing on lots of at least 7,000 net square feet.
[Show full text]
Architectural Lighting
FACADES ARCHITECTURAL LIGHTING 1 INTRODUCTION CONTENT THE FIVE METHODS SEGMENT FOCUS Our new guide has been brought together to share our experience and knowledge of working with some PLAZAS of the world’s most renowned lighting specifiers. HOSPITALITY We wanted to share some inspirational projects across all of the segments that we work in whilst PUBLIC BUILDINGS sharing our knowledge of what to consider when designing with light. We will discuss the RESIDENTIAL fundamental factors that should be considered before we even start that first sketch. OFFICE This guide introduces the five fundamental STADIUM methods of how light can be applied or integrated into an architectural façade. Through a series of RETAIL inspirational case studies (within all segments) we aim to provide a full picture of what can be achieved APPLICATION FUNDAMENTALS through a multi-disciplinary design approach. THE PRODUCTS 2 THE CREATIVE DRIVING FORCE IN ARCHITECTURAL LIGHTING Front page Project Title: Oxford Street, London Lighting Design: Lighting Design International Photography: Andrew Beasley This page Project Title: Kimpton Fitzroy, London Lighting Design: Lighting Design International Photography: Gavriil Papadiotis 3 WE CREATE AMAZING EXPERIENCES WITH LIGHT Lighting can turn spaces into experiences. Using the captivating power of light, we change the way people see or react to buildings, environments and the space around them. Project Title: Serpentine Pavilion, London Lighting Design: Aecom Photography: Zumtobel 4 THE FIVE METHODS HOW ARE YOU GOING TO ILLUMINATE?
[Show full text]