DOCSLIB.ORG

Antoine Allanore

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Antoine Allanore Antoine Allanore Date: October 01, 2016 Department: Department of Materials Science and Engineering Education Records Institution Degree Date Specialization Thesis Title Institut National Polytechnique de Ph.D. in December Experimental study of the iron metal production by electrolysis: iron Lorraine (now Lorraine University) Electrochemical 2007 oxide reduction mechanism and electrochemical cell development Engineering Ecole Nationale Supérieure des Chemical Process January Industries Chimiques, Nancy, France Engineer Diploma 2004 Institut National Polytechnique de M.Sc. with Honors January Lorraine (now Lorraine University) 2004 Fields of Interest Field of Interest Sustainable Materials Processing Green chemistry Sustainable mining Metal extraction Materials Chemistry High Temperature Materials Electrochemistry Honors and Awards Award Name Date TMS Early Career Faculty Fellow Award 2015 Vittorio de Nora from TMS, recognizing outstanding materials science research and development contributions to the reduction of environmental impacts, 2012 as applied in global metallurgical industries Young Leader Professional Development Award from TMS Extraction & Processing Division 2011 Professorships Title Type Begin Date End Date Thomas B. King Career Development Professor in Metallurgy Career Development 9/15/2012 9/14/2015 MIT Affiliations None Publications Books None Papers in refereed journals Publication Publication Name and Url Date A. Allanore, H. Lavelaine, G. Valentin, J.P. Birat and F. Lapicque, « Electrodeposition of metal iron from dissolved species in alkaline media », January Journal of the Electrochemical Society, vol. 154, 187-193, (2007) 2007 A. Allanore, H. Lavelaine, G. Valentin, J.P. Birat and F. Lapicque, « Iron Metal Production by Bulk Electrolysis of Iron Ore Particles in Aqueous January Media », Journal of the Electrochemical Society, vol. 155, 125-129, (2008) 2008 H. Lavelaine and A. Allanore, « Optimized Design of an Iron Electrowinning Cell », 4th Ulcos Seminar Proceedings, Revue de Métallurgie, n°10, January 460-471, (2009) 2009 A. Allanore, H. Lavelaine and W. Xuan, « Application of Modeling to the Development of an Electrochemical Pilot Cell », 4th Ulcos Seminar January Proceedings, Revue de Métallurgie, n°10, 440-454, (2009) 2009 A. Allanore, H. Lavelaine, G. Valentin, J.P. Birat and F. Lapicque, « Observation of the reduction of iron oxide particles to metal in alkaline January solution by electrolysis », Electrochimica Acta, vol. 55, issue 2, 4007- 4013, (2010) 2010 Allanore, Birat, et al. "Experimental investigation of cell design for the electrolysis of iron oxide suspensions in alkaline electrolyte" Journal of January Applied Electrochemistry 40.11 (2010): 1957-1966. Print. 2010 Publication Publication Name and Url Date A. Allanore, H. Lavelaine, G. Valentin and F. Lapicque, « Experimental investigation of cell design for the electrolysis of iron oxide suspensions in January alkaline electrolyte », Journal of Applied Electrochemistry, vol.40, issue 11, 1957-1966, (2010) 2010 A.Allanore, J. Feng, H. Lavelaine and K. Ogle, « The adsorption of hematite particles on steel in strongly alkaline electrolyte», Journal of the January Electrochemical Society, vol. 157, issue 3, 24-30, (2010) 2010 H. Kim, J. Paramore, A. Allanore and D.R. Sadoway, “The influence of electrolyte basicity on the performance of an iridium anode for the January electrolysis of molten iron oxide”, Journal of the Electrochemical Society, vol. 158, issue 10, 101, (2011) 2011 A. Allanore, ‘Contribution of Electricity to Materials Processing: Historical and Current Perspectives’, JOM, vol. 65, issue 2, 131, (2013) February http://link.springer.com/article/10.1007/s11837-012-0538-3 2013 A. Allanore, L. Yin and D.R. Sadoway, A New Anode Material for Oxygen Evolution in Molten Oxide Electrolysis, Nature, 497 (7449), 353–356, May 2013 (2013) http://www.nature.com/nature/journal/v497/n7449/full/nature12134.html A. Allanore, ‘Electrochemical Engineering of Anodic Oxygen Evolution in Molten Oxides’, Electrochimica Acta, vol. 110, 587-592, (2013) November http://www.sciencedirect.com/science/article/pii/S0013468613007652 2013 A. Allanore "Features and Challenges of Molten Oxide Electrolytes for Metal Extraction" Journal of The Electrochemical Society [00134651] 162.1 January (2014): E13-E22. Print. http://jes.ecsdl.org/content/162/1/E13.full 2014 D. Ciceri, D. Manning and A. Allanore "Historical and technical developments of potassium resources" Science of the Total Environment January [00489697] 502. (2015): 590-601. Print. 2015 T. Skorina and A. Allanore "Aqueous alteration of potassium-bearing aluminosilicate minerals: from mechanism to processing" Green Chemistry January [14639262] 17.4 (2015): 2123-2136. Print. 2015 D. Ciceri and A. Allanore, "Microfluidic Leaching of Soil Minerals: Release of K+ from K Feldspar," PLoS ONE 10(10): e0139979. October doi:10.1371/journal.pone.0139979 (2015) http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0139979 2015 B. Chmielowiec, T. Cai and A. Allanore, 'Simultaneous Spatial and Temporal Measurements of the Current Distribution in a Miniature Hull Cell', J. January Electrochem. Soc., vol. 163, issue 5, 142-146 (2016) http://jes.ecsdl.org/content/163/5/E142.abstract 2016 C. Rinzler and A. Allanore, 'Connecting Absolute Electronic Entropy to Empirically Accessible Electronic Properties in High Temperature January Systems', Philosophical Magazine 2016 M.-B. Wagner, R. Valenzuela, T. Vargas, M. Colet-Lagrille, Melanie and A. Allanore "Copper Electrodeposition Kinetics Measured by Alternating January Current Voltammetry and the Role of Ferrous Species" Journal of The Electrochemical Society [00134651] 163.2 (2016): D17-D23. Print. 2016 http://jes.ecsdl.org/content/163/2/D17.abstract S. Sokhanvaran, S.-W. Lee, G. Lambotte and A. Allanore "Electrochemistry of Molten Sulfides: Copper Extraction from BaS-Cu 2 S" Journal of January The Electrochemical Society [00134651] 163.3 (2016): D115-D120. Print. http://jes.ecsdl.org/content/163/3/D115.full.pdf+html 2016 A. H. Caldwell, E. Lai, A. Gmitter and A. Allanore, "Influence of mass transfer and electrolyte composition on anodic oxygen evolution in molten May 2016 oxides", Electrochimica Acta S. Wagstaff and A. Allanore, "Minimization of Macrosegregation in DC Cast Ingots Through Jet Processing," pp. 1-7, 10.1007/s11663-016-0718-6, June 2016 Metallurgical Transactions B. http://link.springer.com/article/10.1007%2Fs11663-016-0718-6 S. Wagstaff and A. Allanore, "Centerline depletion in direct-chill cast aluminum alloys: the avalanche effect and its consequence for turbulent jets August casting," Metallurgical Transactions B 2016 Proceedings of refereed conferences Publication Publication Name and Url Date H. Kim, J.D. Paramore, A.Allanore and D.R. Sadoway, “Stability of iridium anode in molten oxide electrolysis for ironmaking: influence of slag January basicity”, Electrochemical Society Transactions, vol. 33, issue 7, 219, (2010) 2010 A. Allanore and D.R. Sadoway, “Recent developments in carbon-free ironmaking by high temperature electrolysis”, Fray International Symposium, January Volume 2: Advanced Sustainable Iron and Steelmaking, p123-128, FLOGEN, November 2011, Cancun, Mexico 2011 A. Allanore, L.A. Ortiz and D.R. Sadoway, “Molten oxide electrolysis for iron production”, Energy Technology 2011: Carbon Dioxide and Other February Greenhouse Gas Reduction Metallurgy and Waste Heat Recovery, ISBN: 978-1-1180-6182-4, TMS Annual Meeting, February 2011, San Diego, 2011 CA, USA D.R. Sadoway and A. Allanore, “Ironmaking by molten oxide electrolysis”, 1st International Conference on Energy Efficiency and CO2 Reduction in June 2011 the Steel Industry, METEC, June 2011, Düsseldorf, Germany A. Allanore, 'Direct sulfides electrolysis: a sustainable process for copper recovery?', Proceedings of the Copper International Conference (Cobre December 2013), Nickolas Themelis Symposium, Santiago de Chile (Chile), 2013 http://www.cobre2013.cl/en/abstract-symposia/item/471-pyrometallurgy- 2013 and-process-engineering D. Ciceri, T. Skorina, C. Gadois, K. Li, and A. Allanore, 'Processing of potassium silicates for K-release,' Proceedings of the 16th World Fertilizer 2014 Congress of CIEC, Rio de Janeiro, Brazil, CIEC, 2014 http://www.16wfc.com/images/fertilizer/downloads/Proceedigns_16WFC_Medium_resolution.pdf D. Ciceri and A. Allanore, 'Microfluidics to investigate the leaching performance of agrominerals,' Proceedings of the 16th World Fertilizer Congress 2014 of CIEC, Rio de Janeiro, Brazil, CIEC, 2014 http://www.16wfc.com/images/fertilizer/downloads/Proceedigns_16WFC_Medium_resolution.pdf S. Wagstaff and A. Allanore, "Experimental Observations of Macrosegration in DC Casting of Rolling Slab Ingots," TMS Light Metals, 2015 2015 http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/4B8BD5251DD5CA1F85257D1600375631?OpenDocument B.R. Nakanishi, G. Lambotte, and A. Allanore, "Ultra High Temperature Rare Earth Metal Extraction by Electrolysis," Rare Metal Extraction & 2015 Processing, TMS Proceedings, Rare Metal Technology, Wiley, 2015 http://www.wiley.com/WileyCDA/WileyTitle/productCd-111907830X.html Publication Publication Name and Url Date S. Wagstaff and A. Allanore, 'Modification of Macrosegregation Patterns in Rolling Slab Ingots by Bulk Grain Migration', TMS Light Metals 2016 2016 http://onlinelibrary.wiley.com/doi/10.1002/9781119274780.ch120/summary Other major publications Publication Publication Name and Url Date A. Allanore and H. Lavelaine, « Iron production
Load more

Recommended publications
  • Chemical Metallurgy Second Edition
    Chemical Metallurgy Second Edition J.J. MOORE, PhD, BSc, CEng, MIM Professor and Head, Department of Metallurgical and Materials Engineering, Colorado School of Mines, Golden, Colorado, USA Co-authors E.A. Boyce, CChem, FRSC MJ. Brooks, BSc B. Perry, PhD, BSc, CEng, MIM P.J. Sheridan, PhD, BSc, CChem, MRSC Lecturing staff in the Materials Technology Division at Sandwell College of Further and Higher Education FachbereicM^aiBriaivvisssnschaft derTechn.KochschuieD3mstaol Inv.-Nr.: Butterworths London Boston Singapore Sydney Toronto Wellington Contents Preface v Units and symbols xv 1 BONDING AND PERIODICITY 1 (E.A. Boyce) 1.1 The Atomic Structure of Elements 1 1.1.1 The Nucleus 1 1.1.2 Atomic Spectra 2 1.1.2.1 Bohr theory 2 1.1.2.2 Quantum numbers 3 1.1.2.3 Electronic configuration of the elements 4 1.2 The Periodic Table of the Elements 7 1.3 Chemical Bonds 7 1.3.1 The Ionic Bond (Electrovalency) 9 1.3.1.1 Size of atoms 9 1.3.1.2 Ionisation energy 10 1.3.1.3 Electron affinity 11 1.3.1.4 Electronegativity value 12 1.3.1.5 Structures of ionic solids 13 1.3.1.6 Applications of ionic compounds 15 1.3.2 The Covalent Bond 15 1.3.2.1 Shapes of covalent molecules 16 1.3.2.2 Multiple bonds 18 1.3.2.3 Intermolecular forces 18 1.3.2.4 Covalent giant structures of industrial importance 18 1.3.3 The Metallic Bond 20 1.4 A More Detailed Study of the Periodic Table of the Elements 22 1.4.1 The s-Block elements 22 1.4.1.1 Oxides 22 1.4.1.2 Chlorides 22 1.4.2 Transition Elements (d-Block) 22 1.4.2.1 Magnetic properties 25 1.4.2.2 Colour 26 1.4.2.3 Catalytic properties 26 1.4.2.4 Interstitial compound formation 26 1.4.2.5 Variable oxidation states 26 1.4.2.6 Complexes 26 1.4.2.7 The first transition series (Sc to Zn) 27 1.4.3 The p-Block Elements 29 s I viii Contents .
    [Show full text]
  • CURRENT PROGRAMMES on PHYSICAL METALLURGY and RELATED AREAS in BARC Compiled by Metallurgy Division
    BARC/1994/E/007 SB JO n m CURRENT PROGRAMMES ON PHYSICAL METALLURGY AND RELATED AREAS IN BARC Compiled by Metallurgy Division 1994 BARC/199*/E/007 § £ GOVERNMENT OF INDIA 2 ATOMIC ENERGY COMMISSION U < CD CURRENT PROGRAMMES ON PHYSICAL METALLURGY AND RELATEa AREAS IN BARC Compiled by: Metallurgy Division BHABHA ATOMIC RESEARCH CENTRE BOMBAY, INDIA BARC/1994/E/OO7 BIBLIOGRAPHY DESCRIPTION SHEET FOR TECHNICAL REPORT (as per IS i 9400 - 1980) 01 Security classilcat ion : Unclassified 02 Distribution : External 03 Report status : New 04 Series : BARC External 05 Report type : Technical Report 06 Report No. : BARC/1994/E/007 07 Part No. or Volume No. : 08 Con t r sct No. : Current programmes on physical metallurgy and related areas in B.A.R.C 11 Collation : 152 p., figs. 13 Project No. : 20 Personal author (s) 21 Affiliation of author <s) : 22 Corporate author(s) : Bhabha Atomic Research Centre, Bombay-400 085 23 Originating unit s Metallurgy Division, BARC, Bombay 24 Sponsor(s) Name : Department of Atomic Energy Type : Government 3O Date of submission : March 1994 31 Publication/Issue date March 1994 contd...<ii) (ii) 40 Publisher/Distributor s Head, Library and Information Division, Bhabha Atomic Research Centre , Bomb ay 42 Form of distribution s Hard Copy 50 Language of te:<t : English 51 Language of summary : Eng1i sh 52 No. af references : 53 Gives data on : 6O Abstract rCurrent research and development programmes an physical Metallurgy and related areas from the following Divisions are included in this report : Atomic Fuels Division, High Presure Physics Division, Metallurgy Division, Radio Metallurgy Division, Solid State Physics Division.
    [Show full text]
  • Pyrometallurgy and Electrometallurgy of Rare Earths – Part A: Analysis of Metallothermic Reduction and Its Variants
    Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 18 March 2021 doi:10.20944/preprints202103.0463.v1 Page 1 of 14 Pyrometallurgy and electrometallurgy of rare earths – Part A: Analysis of metallothermic reduction and its variants Muhammad Musaddique Ali Rafique Eastern Engineering Solutions Inc., Cambridge, MA 02139 E: [email protected] Abstract Rare earths are classified as most important and critical material for US economy and defense by Congress and a mandate has been set to increase their in-house production, domestic resource utilization and decrease reliance on foreign resources and reserves. They are widely available in earth crust as ore (bastnaesite (La, Ce)FCO3, monazite, (Ce, La, Y, Th)PO4, and xenotime, YPO4), but their so-called economic reserves are sparsely located geographically. They may be produced by various means such as beneficiation (physical, chemical, mechanical, or electrical), reduction (direct or indirect), electrolysis (of aqueous or molten / fused single or mixed salt systems) at high temperature or hydrometallurgy. Out of these, direct reduction also known as metallothermic reduction (La and Ca reduction) is mostly utilized. Its variant, high temperature electrowinning of fused salts is also practiced widely. These processes are material and application specific. In this study, author will employ thermodynamics (Ellingham diagrams, -2 free energy of formation, reduction potential, Nernst equation, Pourbaix (Eh-pH) diagrams, E-pO diagrams), kinetics and energetic of a chemical reaction (chemical metallurgy) to reduce rare earth oxide / salt to rare earth metals (REO/RES – REM). It is shown that materials and energy requirement vary greatly depending on type of mineral ore, production facility, and beneficiation / mineral processing method selected.
    [Show full text]
  • Teaching High-Temperature Materials Chemistry at University
    Pure Appl. Chem., Vol. 81, No. 2, pp. 299–338, 2009. doi:10.1351/PAC-REP-08-05-01 © 2009 IUPAC INTERNATIONAL UNION OF PURE AND APPLIED CHEMISTRY INORGANIC CHEMISTRY DIVISION* TEACHING HIGH-TEMPERATURE MATERIALS CHEMISTRY AT UNIVERSITY (IUPAC Technical Report) Prepared for publication by GIOVANNI BALDUCCI1,‡, ANDREA CICCIOLI1, GIOVANNI DE MARIA1, FIQIRI HODAJ2, AND GERD M. ROSENBLATT3 1Department of Chemistry, University of Rome, La Sapienza, Piazzale Aldo Moro 5, I-00185 Roma 34, Italy; 2SIMAP Laboratory, ENSEEG/LPTCM, Domaine Universitaire, B. P. 75, F-38402 Saint Martin d’Hères, France; 3Materials Science Division, Mail Stop 62B0203, E. O. Lawrence Berkeley National Laboratory, University of California, Berkeley, CA 94720-8253, USA *Membership of the Division Committee during the final preparation of this report was as follows: President: A. R. West (UK); Vice President: K. Tatsumi; Secretary: L. V. Interrante (USA); Titular Members: C. Bianchini (Italy); A. Chadwick (UK); T. B. Coplen (USA); M. Leskela (Finland); R. D. Loss (Australia); J. Reedjik (Netherlands); M. P. Suh (Korea); Associate Members: J. Garcia-Martinez (Spain); N. E. Holden (USA); S. Mathur (Germany); L. A. Oro (Spain); National Representatives: T. Basova (Russia); J. Corish (Ireland); J. Takats (Canada); M. Drabik (Slovakia); T. P. Gajda (Hungary); T. Ding (China/Beijing); V. K. Jain (India). ‡Corresponding author: E-mail: [email protected] Republication or reproduction of this report or its storage and/or dissemination by electronic means is permitted without the need for formal IUPAC permission on condition that an acknowledgment, with full reference to the source, along with use of the copyright symbol ©, the name IUPAC, and the year of publication, are prominently visible.
    [Show full text]
  • Introduction to Mineral Processing & Extractive Metallurgy in Recycling
    RecyclingRecycling TechnologiesTechnologies && ConsiderationsConsiderations (Introduction(Introduction toto MineralMineral ProcessingProcessing && ExtractiveExtractive MetallurgyMetallurgy inin Recycling)Recycling) Edgar E. Vidal and Patrick R. Taylor Kroll Institute for Extractive Metallurgy Colorado School of Mines G.S. Ansell Department of Metallurgical & Materials Engineering KIEM WhyWhy ShouldShould CompaniesCompanies Recycle?Recycle? Computer Monitor Recycling in China – ¾ The bottom line is Copyright Basel Action economics. Network ¾ But in addition, companies may derive positive benefits from addressing both: social responsibility and sustainable development issues. G.S. Ansell Department of Metallurgical & Materials Engineering KIEM WhatWhat TechnologyTechnology isis usedused inin Recycling?Recycling? ¾ Most recycle technology is based upon our understanding of both mineral processing and extractive metallurgy. ¾ Innovative advances in both technologies have been, and are being, made to address the unique resource recovery problems associated with both recycling and waste Computer Wire Recycling minimization. in China (Copyright Basel Action Network) G.S. Ansell Department of Metallurgical & Materials Engineering KIEM DUST EXHAUST TRUNK LINK COLLECTOR EXHAUST AIR Fe WIRE CROSSBELT INPUT MAGNET TWO DECK EXHAUST SCREEN WASTE FAN PRIMARY PRODUCT GRANULATOR CROSSBELT SECONDARY TERTIARY DUAL MAGNET GRANULATOR GRANULATOR ASPIRATOR BIN Fe COPPER OR ALUMINUM DUST GRAVITY WireWire ProcessingProcessing SystemSystem SEPARATOR (System(System
    [Show full text]
  • Chiranjib Kumar Gupta Chemical Metallurgy
    Chiranjib Kumar Gupta Chemical Metallurgy Chemical Metallurgy: Principles and Practice. Chiranjib Kumar Gupta Copyright © 2003 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim ISBN: 3-527-30376-6 Chiranjib Kumar Gupta Chemical Metallurgy Principles and Practice Author This book was carefully produced. Nevertheless, author and publisher do not warrant the information Dr. Chiranjib Kumar Gupta contained therein to be free of errors. Readers are Bhabha Atomic Research Centre advised to keep in mind that statements, data, Materials Group illustrations, procedural details or other items may Mumbai 400085 inadvertently be inaccurate. India Library of Congress Card No.: applied for British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library. Bibliographic information published by Die Deutsche Biblothek Die Deutsche Bibliothek lists this publication in the Deutsche Nationalbibliografie; detailed bibliographic data is available in the Internet at <http://dnd.ddb.de>. © 2003 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim All rights reserved (including those of translation into other languages). No part of this book may be reproduced in any form – by photoprinting, microfilm, or any other means – nor transmitted or translated into a machine language without written permission from the publishers. Printed in the Federal Republic of Germany Printed on acid-free and low chlorine paper Cover Design Grafik-Design Schulz, Fußgönheim Typesetting Manuela Treindl, Laaber Printing betz-druck GmbH, Darmstadt Binding Großbuchbinderei J. Schäffer GmbH & Co. KG, Grünstadt ISBN 3-527-30376-6 V Foreword Dr. C. K. Gupta is a very distinguished colleague of mine. I have been familiar with his pro- fessional career over a long period.
    [Show full text]
  • Ever in Orbit Full Treatment of Aluminium Chemical
    NATURE, VOL. 214, APRIL 1. 1967 57 little account appears to have been taken of work pub­ EVER IN ORBIT lished after 1962. Few references bear the date 1963 The Earth-Moon System (although at least one publication of 1965 is referred to) Edited by B. G. Marsden and A. G. W. Cameron. (Pro­ but, for instance, grain boundary precipitation pheno­ ceedings of an International Conference, January 20-21, mena in aluminium-zinc-magnesium alloys are discussed 1964, sponsored by the Institute for Space Studies of the entirely in terms of solute depletion, no mention being Goddard Space Flight Center, NASA.) Pp. xiv+288. made of recent explanations based on a vacancy depletion (New York: Plenum Press, 1966.) $12.50. mechanism. Other examples can be cited. THE present rate of publication of new books on the Moon At £7 the book cannot be recommended to the individual buyer, but should find a place on library shelves as a is so great that one automatically questions their need and asks how they differ in their coverage from previously general introduction to aluminium metallurgy and as a published volumes. This volume provides outlines of all convenient source of thermodynamic data of interest the interesting aspects of the dynamics of the Earth­ in the field. H. ME.li> Moon system and the origin of the Moon, and the only w. D. MOORE comparable book is Munk and MacDonald's The Rotation c. of the Earth. Although some topics in Munk and Mac­ Donald are repeated in The Earth-Moon System, the emphasis is, naturally, different; and other topics in the two books are distinctly different.
    [Show full text]
  • Corrosion of Metals
    NBS SPECIAL PUBLICATION 396-3 U.S. DEPARTMENT OF COMMERCE / National Bureau of Standards NATIONAL BUREAU OF STANDARDS The National Bureau of Standards' was established by an act of Congress March 3, 1901. The Bureau's overall goal is to strengthen and advance the Nation's science and technology and facilitate their effective application for public benefit. To this end, the Bureau conducts research and provides: (t) a basis for the Nation's physical measurement system, (2) scientific and technological services for industry and government, (3) a technical basis for equity in trade, and (4) technical services to promote public safety. The Bureau consists of the Institute for Basic Standards, the Institute for Materials Research, the Institute for Applied Technology, the Institute for Computer Sciences and Technology, and the Office for Information Programs. THE INSTITUTE FOR BASIC STANDARDS provides the central basis within the United States of a complete and consistent system of physical measurement; coordinates that system with measurement systems of other nations; and furnishes essential services leading to accurate and uniform physical measurements throughout the Nation's scientific community, industry, and commerce. The Institute consists of the Office of Measurement Services, the Office of Radiation Measurement and the following Center and divisions: Applied Mathematics — Electricity — Mechanics — Heat — Optical Physics — Center for Radiation Research: Nuclear Sciences: Applied Radiation — Laboratory Astrophysics" — Cryogenics" — Electromagnetics-" — Time and Frequency". THE INSTITUTE FOR MATERIALS RESEARCH conducts materials research leading to improved methods of measurement, standards, and data on the properties of well-characterized materials needed by industry, commerce, educational institutions, and Government; provides advisory and research services to other Government agencies; and develops, produces, and distributes standard reference materials.
    [Show full text]
  • Basic Principles of Metallurgy and Metalworking
    Basic Principles of Metallurgy and Metalworking Course No: T04-009 Credit: 4 PDH Donald Parnell, P.E. Continuing Education and Development, Inc. 22 Stonewall Court Woodcliff Lake, NJ 076 77 P: (877) 322-5800 [email protected] Basic Principles of Metallurgy and Metalworking 1 Basic Principles of Metallurgy and Metalworking Table of Contents Chapter 1: History of Metalwork and Metallurgy Chapter 2: Ore and Metallurgical Processing Chapter 3: Metal Properties and Alloys Chapter 4: Mechanical Properties of Metals Chapter 5: Strength in Metals Chapter 6: Corrosion Resistance Chapter 7: Types of Iron (Ferrous Metals) Chapter 8: Types of Steel (Another Ferrous Metal) Chapter 9: Nonferrous Metals and Alloys Chapter 10: Metalworking Processes Chapter 11: Metal Identification And Testing Methods 2 Basic Principles of Metallurgy and Metalworking Chapter 1: History of Metalwork and Metallurgy 3 Basic Principles of Metallurgy and Metalworking Metals and temperature Throughout history, advances in metalworking correlated with advances in achieving the higher temperatures in our melting of those metals. As we developed the means to achieve higher temperatures in the melting and smelting processes, so too did we advance in our metalworking and alloying technologies. Those ores and metals that could be smelted and melted at lower temperatures were the first to be developed into the weaponry, tools, and jewelry of the day. Metals with lower melting points such as copper, and its alloy bronze, were discovered long before iron and its alloy steel. Also, the pure metals, like copper and iron, were used before their alloys, bronze and steel. 4 Basic Principles of Metallurgy and Metalworking Metals found in ancient history Ancient civilizations knew of seven metals: • Iron • Tin • Lead • Copper • Mercury • Silver • Gold Not all metal required heat in order to be processed.
    [Show full text]
  • GANDHI CENTRE for Atomic RESEARCH Kalfai(KAM ICC-100 1988
    O CO o w «- 0) 6" Biennial Activity Report of Metallurgy Programme-1985 and 1986 Edite: by C. Maiitkc P. R. Sreenivosan P. Murahedhcran M. T. Shyamsunder P. Kuppusami N. Sampath A. K. Bhaduri 0. M. Sreedharan GOVERNMENT OF INDIA. DEPARTMENT OF ATOMIC ENEFCY GANDHI CENTRE FOR ATOMiC RESEARCH KALFAi(KAM ICC-100 1988 GOVERNMENT OF INDIA DEPARTMENT OF ATOMIC ENERGY Biennial Activity Report of Metallurgy Programme-1985 and 1986 Edited by C. Mallika, P.R. Sreenivasan, P. Muraleedharan, Ai.T. Shyamsunder, P. Kuppusami, N. Sampath, A.K. Bhaduri and O.M. Sreedharan Indira Gandhi Centre for Atomic Research Kalpakkam 603 102, Tamil Nadu, India FOREWORV I have, gxzat pk.aiu.xz in pie.ie.ntmQ thz Biennial Activity Uzpoit o{\ thz Mztalluxgy Pxogxammz oh the, Indka Gandhi Ce.ntxz faoi Atomic Ue.ie.aich hot the. ye.au 1985 and 1986. Thii xzpoxting pzxiod maihi the. f,iut two ye.au oh thz izcond decade oh thz Pxogxammz. Thz pziiod hai izzn iomz itxuctuxal changzi in thz oxgani- iation oh thz Pxogxammz. Thz activitizi oj thz "Radiomztalluxgy Laboxatoiy havz come undzx thz Viviuon fax Poit-lxxadiation Examination and NVT Peve- lopmznt [VPENV) oh thz Mztalluxgy Pxogxammz. Thz doxmation oh VPENV ii a xzcognition not only oh thz impoxtancz oh NVT in Poit-lxxadiation Exami- nation but aiio oft thz zxczllznt contxibutiom ^xom tkii taboxatoxy to both V.SV in NVT and to impoxtant pxactical applicatiom in out powzx xzactoxi, hzavy watzx pxojzcti and in FBTU. With thz completion o& thz comtxaction o^ FBTH, thz Quality Contxol S Inipzction Wing hai now become a paxt ofa thz Pxogxammz and hai bzzn xznamzd ai thz Quality Enginzzxing Section.
    [Show full text]
  • Methods of Investigation of Surface Treatment for Corrosion Protection Of
    NATIONAL BUREAU OF STANDARDS The program of research on building materials and structures vmdertaken by the National Bureau of Standards is planned with the assistance of the following advisory committee designated by the Subcommittee on Design and Construction of the Central Housing Committee. TECHNICAL RESEARCH GROUP Walter Junge, Federal Housing Administration, Acting Chairman A. G. Bear, Vincent B. Phelan, Veterans' Administration. National Bureau of Standards. Pierre Blouke, E. A. POYNTON, Home Owners' Loan Corporation. Bureau of Lidian Affairs. C. W. Chamberlain, John H. Schaefer, Procurement Division. Procurement Division. Jos. M. DallaValle, A. C. Shire, Public Health Service. United States Housing Authority. Hugh L. Dryden, George W. Trayer, National Bureau of Standards. Forest Service. G. E. Knox, Elsmere J. Walters, Bureau of Yards and Docks, Navy Quartermaster Corps, War Department. Department. Sterling R. March, Charles E. Mayette, Secretary. United States Housing Authority. The program is administered and coordinated by the following staff committee of the Bureau: Hugh L. Dryden, Chairman P. H. Bates W. E. Emley A. S. McAllister H. C. Dickinson G. E. F. Lundell H. S. Rawdon The Forest Products Laboratory of the Uniied States Department of Agriculture is cooperating with the National Bureau of Standards in studies of wood constructions. How To Purchase BUILDING MATERIALS AND STRUCTURES REPORTS On request, the Superintendent of Documents, U. S. Government Printing OflBce, Washington, D. C, will place your name on a special mailing list to receive notices of new reports in this series as soon as they are issued. There will be no charge for receiving such notices. An alternative method is to deposit with the Superintendent of Documents the sum of $5.00, with the request that the reports be sent to you as soon as issued, and that the cost thereof be charged against your deposit.
    [Show full text]