High Security Handbook

Automatic Bollards

SP180 Automatic Bollard Engineered for 314kJ VP HD Automatic Bollard PAS 68: V/1500(M1)/32/90:0/0 Defender Automatic Bollard DOS: K4 SP400 Automatic Bollard PAS 68: V/7500(N2)/48/90:0/0 PAS 68: V/7500(N2)/64/90:2.3/2.7 SPTT Automatic Bollard PAS 68: V/7500(N2)64/90:0.5/6.1 Stealth Automatic Bollard IWA 14: V/7200(N2A)/80/90:0.8 Titan MK II Automatic Bollard PAS 68: V/7500/80/90:4.0/33.5 SP1000 Automatic Bollard PAS 68: V/7500(N2)80/90:0/10 ASTM: M50 P1 SP1200 Automatic Bollard PAS 68: 30,000(N3)/80/90:3.30/25

SP180 AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated

**Reflective bands are not available with this product.

PRODUCT OVERVIEW The bollard itself has a slim diameter measuring just 180 mm and is ATG Access is proud to launch a new SECURITY RATING family of bollards, the SP180 range. supplied in a black sherardized finish

as standard. Engineered to withstand a This range is designed to arrest a 3,500 3,500 kg vehicle travelling at 48 kg vehicle travelling at 48 kph: a Fully compliant with BS EN ISO kph. A resistance of 314 KJ + resistance of 314 KJ+. 13849:201 5, safety of machinery – CE Mark; this bollard can be paired with Minimum array – 1 unit.

any form of access control operation Not only is this range designed to withstand substantial impact, but it also required. ATG Access design and offers a comprehensive range of build all control systems in-house and FINISHES these can be designed to a client’s options and operation methods. The Supplied in a sherardized automatic variant can be integrated into specification. black finish as standard with a any access control system and the Driven by hydraulic power supplied via stainless-steel lid. The product fixed variant compliments providing an external HPU. High security can also be fitted with an LED permanent, perimeter protection. cabinets are also available if required. lighting lid if required.

No machine banding or As with all ATG Access products, Comes with the option of a stainless- serviceability is the foremost steel lid fitted with direct LED (RGBW) reflective tape is supplied with consideration when designing a new lights to increase visibility of the the SP180 product. product range & the SP180 range is no product when being used in the public exception. realm.

SP180 AUTOMATIC BOLLARD

Automatic Bollard Diameter 180 mm Height Above 700 mm FGoundationround Depth 1,100 mm

Supplied in a black sherardized finish as standard with a stainless-steel lid. Can be fitted with a Finishes Available lighting lid if required. No machine banding or reflective tape can be supplied with this product.

Security Rating Impact Resistance of 314 KJ+

Safety Fully compliant with BS EN ISO 13849:2015, safety of machinery – CE Mark

PRODUCT OVERVIEW The VP HD bollard itself has a diameter of just 186 mm and a height of 700 mm above ground. The ATG Access VP HD bollard has been SECURITY RATING successful impact tested in accordance with the The product is supplied as standard with a black, polyurethane, or stainless-steel aesthetic PAS 68 certification to arrest a 1,500 kg vehicle Meets the BSI PAS 68 rating sleeve, a stainless-steel lid and two machine at 32 kph. when installed to PAS 69 bands. certification. The VP Heavy Duty bollard can be retrofitted into VP HD SOFTWARE V/1,500(M1)/32/90:0.0 any existing VP Traffic system to upgrade an Depending on a client’s project specification, Minimum tested array – 1 unit area with a higher level of security protection. access control options include: a vehicle tag

system, number plate recognition, CCTV, VP HD HARDWARE keypad authorisation or a timing clock. If an The VP HD can be used alongside a red and existi ng access control system is already in green traffic indicator column to instruct users place, ATG bollards can be integrated with this. FINISHES when it is safe to pass through the system. Supplied with either a black PU Loops are installed within the ground surface on This automatic bollard system is ideal for sleeve with two yellow reflective both the vehicle approach and vehicle exit. controlling vehicle access to key infrastructure bands or a stainless-steel sleeve Loops will detect when a vehicle has safely sites with heavy pedestrian flow such as high with two black bands as moved through the system and will instruct the streets or urban areas and where the identified standard. bollards to rise when it is safe to do so. threat is from smaller vehicles moving at lower speeds. Driven using an external HPU motor.

VP HD AUTOMATIC BOL LARD

Automatic a Bollard Diameter 186 mm Height Above Ground 700 mm Foundation Depth 1,108 mm (including soakaway) Supplied with either a black PU sleeve with two yellow reflective Finishes Available bands or a stainless-steel sleeve with two black bands as standard. Security Rating PAS 68: V/1,500(M1)/32/90:0.0 Fully compliant with BS EN ISO 13849:2015, safety of Safety machinery – CE Mark

PRODUCT OVERVIEW The ATG Access Defender, K4 impact tested Other product finishes are available on bollard can cope with a high number of application such the fitting of aesthetic SECURITY RATING operations per hour and is ideal for sites with s leeves and red LED lights in the top lid. high traffic flow. American Department of State: K4, L2. Minimum array of 3 bollards. The control board provided as standard The Defender is an economical and effective is a PLC control system which can be way of protecting your vehicle access points setup to meet whatever operational and has been installed at high security sites requirements you may have. The all over the world. product can also be fitted with an FINISHES emergency fast operation function so Finished with high visibility yellow K4 impact test certified after successfully arresting a 6,800 kg vehicle travelling at 30 that the bollard/s can be deployed in just paint as standard. Alternatively, the mph (48 kph). This product offers low (2 seconds). product can be supplied in a operating and maintenance costs. galvanised finish or fitted with an The system works using hydraulic aesthetic sleeve. All steel parts are galvanised as standard for operation with an external HPU housed Red LED lights can also be corrosion protection. The product is then within a cabinet. High security cabinets requested in the top lid. finished in high visibility yellow paint as are available on request. standard

DEFENDER AUOTMATIC BOLLARD

Automatic Bollard Diameter 10.75” (273 mm) / Sleeved 11” (279 mm) Height Above Ground 31” (762 mm) Foundation Depth 49” (1235 mm) Galvanised & then painted yellow as Finishes Available standard. Can be fitted with an aesthetic sleeve or with red LED lights in the top lid. DOS: K4, L2 – Minimum, 3 Bollard Tested Security Rating Array. Fully compliant with BS EN ISO 13849:2015, Safety safety of machinery

PRODUCT OVERVIEW Able to cope with a high number of operations per hour, this product is ideal for The ATG Access SP400 is available in a sites with high traffic flow. The bollards can SECURITY RATING multitude of finishes and operation types be part of a large, secure access control making this product one of ATG Access’s most scheme or operated as a standalone BSI PAS 68: 2010 versatile high security bollards. V/7,500(N2)48/90:0/0 system. 48 kph - 64 kph - V/7,500(N2)64/90:2.3/2.7

This product has been successfully tested to Minimum tested array – 1 unit the British PAS 68 impact test standard. The control board provided as standard is a

PLC control system which ATG Access can Supplied in a black, sherardized finish as design to meet whatever operational standard (with or without bands) with a requirements you may have (all systems stainless-steel lid; this bollard can also be fitted FINISHES designed in house). An emergency fast with a decorative sleeve and lights if required. Available in a variety of finishes: operation function is also available if black sherardized as standard with The automatic SP400 high security bollard is required which raises the system in under 2 a stainless-steel lid, with or without hydraulically operated using an external HPU. seconds. two yellow reflective bands (client preference). Can be fitted with an The bollard has been successfully tested twice The product has been designed and aesthetic sleeve and supplied with with a 7,500 kg vehicle travelling at both 64 kph manufactured with serviceability in mind and LED lights if required. and then 48 kph. as a result offers fantastic reliability.

SP400 AUTOMATIC BOLLARD

Automatic Standard: 209 mm with a 240 mm top lid Bollard Diameter Sleeved: 219 mm with a 240 mm top lid Height Above Ground 998 mm Foundation Depth 1,528 mm

Sherardized, black finish as standard with or without two yellow reflective bands (client preference). The product can be fitted with Finishes Available an aesthetic sleeve if required and supplied with a stainless-steel, LED lighting lid. BSI PAS 68: V/7,500(N2)48/90:0/0 Security Rating BSI PAS 68: V/7,500(N2)64/90:2.3/2.7

Fully compliant with BS EN ISO 13849:2015, safety of machinery Safety – CE Mark

SPTT HIGH SECURITY BOLLARD Operation Type: Automatic – Hydraulically Operated

PRODUCT OVERVIEW to mitigate against the 7,500 kg @ 64 kph threat level. The ATG Access SPTT, shallow foundation bollard has a unique double retractable This latest innovation in crash tested technology SECURITY RATING design which ensures smooth operation and allows the use of automatic bollards for high acts as a depth saving feature. security solutions to be installed within areas BSI PAS 68: V/7,500(N2)/64/90:0.5/6.1 where underground services or a lack of space Most impact tested, automatic bollards have Minimum tested array – 1 unit for excavation may cause a problem. a foundation depth of around 1,500 mm. This innovative product has a foundation depth Able to cope with a high number of operations requirement of just 900 mm - less than a per hour, this product is ideal for sites with high FINISHES meter. traffic flow.

Sherardised black finish as The product has been successfully impact The bollards can be part of a large, secure standard. Option to sleeve with tested in a single bollard sequence in access control scheme or operated as a a stainless-steel finish accordance with BSI PAS 68:2010, arresting standalone system. depending on application a 7,500 kg vehicle travelling at 64 kph (40 (210mm top, 282mm top mph) and achieving less than a meter of The control board provided as standard is a PLC diameter). Product can be vinyl penetration. control system which we can setup to meet wrapped with a bespoke design whatever operational requirements you may or advertising copy. The SPTT shallow foundation bollard is have. Driven by hydraulics; either utilising an unique within the high security industry and external HPU or an integral pump. is the shallowest, automatic bollard solution

SPTT HIGH SECURITY AUTOMATIC BOLLARD

Automatic Bollard Diameter 209 mm (top section), 280 mm (bottom section)

Height Above Ground 1,000 mm Foundation Depth 900 mm Sheradised black finish as standard. Option to sleeve with a stainless-steel finish depending on application (210mm top, 282mm Finishes Available top diameter). Product can be vinyl wrapped with a bespoke design or advertising copy.

Security Rating PAS 68: V/7,500(N2)64/90:0.5/6.1

Safety Fully compliant with BS EN ISO 13849:2015, safety of machinery

STEALTH HIGH SECURITY BOLLARD Operation Type: Automatic – Hydraulically Operated

PRODUCT OVERVIEW The bollard can be part of a large, secure access control scheme or operated as a ATG Access has designed an automatic, high standalone system. SECURITY RATING security bollard which can be operated with integral or external hydraulics. Can be installed Able to cope with a high number of Single Bollard Impact Test: IWA 14: V/7200[N2A]/80/90:2.4 as a new installation or be retrofitted into an operations per hour, this product is ideal existing, impact tested bollard foundation. This for sites requiring maximum security and Dual Bollard Impact Test: was the first British product to be officially tested IWA 14: V/7200[N2A]/80/90:0.8/10.4 with a high traffic flow. The system can at MIRA under the IWA, international impact test also be supplied with an ‘emergency fast PAS 68: V/7500(N2)/80/90:0.795/10.4 standard 2014. operation’ function which allows the product to be deployed in just seconds. Retrofit high security products are needed when historic installations become increasingly difficult Tested twice as a single and double for the owner to service and keep operational. To bollard configuration, both tests used a FINISHES replace entire systems with new products 7,200 kg N2a type vehicle travelling at Sheradised black finish as standard normally involves the costly and disruptive 80 kph (50 mph). Both impact tests with two yellow reflective bands. Option removal of huge reinforced foundation structures. produced fantastic results with the to fit with an aesthetic sleeve (240mm The ability to treat existing, installed outer bollards being fully operational after diameter) or with direct LED (RGBW) casings with corrosion protection and then retrofit impact. lights - the external HPU model only. a new, certified security solution is unique. Product can be vinyl wrapped with a Driven by hydraulic power, the Stealth bespoke design or advertising copy. The Stealth Bollard system has been designed bollard system can have either an with reliability and serviceability in mind. external HPU or an integral pump.

STEALTH AUTOMATIC BOLLARD Bollard Diameter 230 mm

Height Above Ground 1,000 mm Foundation Depth 1,514 mm

Sheradised black finish as standard with two yellow reflective bands. Option to fit with an aesthetic sleeve Finishes Available (240mm diameter) or with direct LED (RGBW) lights - the external HPU model only. Product can be vinyl wrapped with a bespoke design or advertising copy.

Single: IWA 14: V/7200[N2A]/80/90:2.4

Security Rating Twin: IWA 14: V/7200[N2A]/80/90:0.8/10.4 | PAS 68: V/7500(N2)/80/90:0.795/10.4 Operation Integral or External Hydraulics. EFO function available.

Safety Fully compliant with BS EN ISO 13849:2015, safety of machinery

TITAN MK II AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated

PRODUCT OVERVIEW The hydraulically operated automatic system offers outstanding protection; maintains The ATG Access Titan MK II is an pedestrian permeability and allows SECURITY RATING impact tested bollard and is available in authorised vehicle access when needed. Meets the BSI PAS 68 rating when a variety of operating sets and arrays. Able to cope with a high number of installed to PAS 69 certification. The Titan MK II bollard is an operations per hour, this product is ideal for PAS 68: V/7,500/80/90:4.0/33.5 economical and effective way of sites with high traffic flow. An emergency fast ASTM: M50 P2 protecting your key access points operation function can be fitted to allow the Minimum tested array – 1 unit against high velocity attacks. product to be deployed in just seconds.

The product can be operated as The bollards can be part of a large, secure standard with a hydraulic pump system access control scheme or operated as a external to the bollard unit or as a standalone system. FINISHES manually operable, standalone Galvanised and then painted as standard. product. The control board provided as standard is a Option to fit with an aesthetic sleeve PLC control system which we can setup to (323mm diameter). Direct LED (RGBW) All steel parts are hot dip galvanised as meet whatever operational requirements you lights are also available for the painted or standard for corrosion protection. This may have. ATG Access designs and tests all galvanised variant. also ensures long term reliability of the control systems in-house. product.

TITAN MK II AUTOMATIC BOLLARD

Automatic Bollard Diameter 273 mm (323 mm sleeved) Height Above Ground 1,000 mm Foundation Depth 1,684 mm Galvanised and then painted as standard. Option to fit with

Finishes Available an aesthetic sleeve (323mm diameter). Direct LED (RGBW) lights are also available for the painted or galvanised variant.

PAS 68: V/7,500/80/90:4.0/33.5 Security Rating ASTM: M50 P2

Fully compliant with BS EN ISO 13849:2015, safety of Safety machinery

SP1000 AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated

PRODUCT OVERVIEW is hydraulically operated product, offering outstanding security and aesthetics. The SP1000 high security bollard was the first of ATG Access’s high security bollards to be Able to cope with a high number of operations SECURITY RATING successfully impact tested, nearly a decade per hour, this product is ideal for sites with high ago. traffic flow. The bollards can be part of a large, BSI PAS 68: V/7,500(N2)80/90:0/10 The automatic high security bollard has been secure access control scheme or operated as successfully tested in accordance with PAS 68 a standalone system. ASTM: M50 P1 arresting a 7,500 kg vehicle travelling at 80 kph Minimum tested array – 1 unit. The control board provided as standard is a (50mph). PLC control system which we can setup to The product has also been tested to comply meet whatever operational requirements you with the American ASTM standard achieving a may have. The product raises and lowers in M50: P1 rating. just 5-6 seconds. FINISHES Galvanised as standard with two This product is ideal for sites under threat of a This product offers the highest site protection yellow reflective bands. Can be high velocity attack and with limited stand-off required to protect against a high velocity fitted with either a black or distance between the perimeter and the attack. Sites still remain pedestrian and stainless-steel aesthetic sleeve infrastructure being protected. vehicle permeable (when authorised). (350mm diameter). AUTOMATIC BOLLARD The automatic SP1000 high security bollard

SP1000 AUTOMATIC BOLLARD

Automatic Bollard Diameter 300 mm (350 mm sleeved)

Height Above Ground 1,000 mm Foundation Depth 1,933 mm Galvanised as standard with two yellow reflective Finishes Available bands. Can be fitted with either a black or stainless- steel aesthetic sleeve (350mm diameter). PAS 68: V/7,500(N2)80/90:0/10 Security Rating ASTM: M50 P1 Fully compliant with BS EN ISO 13849:2015, safety of Safety machinery

SP1200 AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated

PRODUCT OVERVIEW AUTOMATIC BOLLARD The ATG Access SP1200 high Able to cope with a high number of operations per SECURITY RATING security bollard is the world’s hour, this product is ideal for sites with high traffic Meets the BSI PAS 68 rating when strongest, impact tested bollard. flow. The bollards can be part of a large, secure installed to the PAS 69 certification. access control scheme or operated as a It is the only bollard to have been standalone system. V/30,000(N3)80:3.30/25 tested to the British PAS 68 Minimum tested array – 1 unit. standard with a 30,000 kg vehicle The control board provided as standard is a PLC travelling at 80 kph (50 mph). control system which ATG can setup to meet whatever operational requirements you may have. The single automatic SP1200 bollard remained intact after impact Driven by hydraulics, the HPU is external and FINISHES and would not have allowed a housed within a cabinet. This cabinet can be Galvanised as standard with two yellow supplied with high security, LCPB rated locking second vehicle to pass. reflective bands. For any alternative mechanism if required. finishes, please discuss with our The SP1200 automatic bollard is technical team on application for a designed to be serviced & This product is engineered to offer the highest site quotation. maintained quickly by one man. This protection required to protect against a high is critical in maintaining the high velocity attack. Sites still remain pedestrian and level of security required when vehicle permeable (when authorised). choosing this product.

SP1200 AUTOMATIC BOLLARD

Automatic Bollard Diameter 300 mm

Height Above Ground 1,200 mm Foundation Depth 2,040 mm Galvanised as standard with two yellow reflective bands. Finishes Available For any alternative finishes, please discuss with our technical team on application for a quotation.

Security Rating PAS 68: V/30,000(N3)80:3.30/25 Fully compliant with BS EN ISO 13849:2015, safety of Safety machinery.

Manually Retractable Bollards

SP100 Manually Retractable Bollard PAS 68: V/3,500(N1)48/90:2.8/0.0 SP400 Manually Retractable Bollard PAS 68: V/7500(N2)/48/90:0/0 PAS 68: V/7500(N2)/64/90:2.3/2.7 SPTT Manually Retractable Bollard PAS 68: V/7500(N2)64/90:0.5/6.1 Stealth Manually Retractable Bollard IWA 14: V/7200(N2A)/80/90:0.8 Titan MK II Manually Retractable Bollard PAS 68: V/7500/80/90:4.0/33.5

SP100 MANUALLY RETRACTABLE BOLLARD Operation Type: Manually Retractable & Fixed

PRODUCT OVERVIEW Users with high traffic volume will The ATG Access SP100 bollard is a manually benefit from ATG’s range of high security automatic products. operable product requiring no power to SECURITY RATING

operate and no ducting or rebar to install. BSI PAS 68 (2007): A folding, stainless steel handle is V/3,500(N1)48/90:2.8/0.0 Having successfully stopped a 3,500 kg offered as standard with the stainless Minimum tested array – 1 unit vehicle travelling at 48 kph (30 mph), the steel, sleeved model; a black T-bar Static variant has been engineered to product is well placed to mitigate lower velocity handle is fitted with all other versions of mitigate the same level of threat. vehicular attacks. this product.

The manually retractable SP100 is fitted with a FIXED VARIANT lift-assist mechanism as standard, reducing The SP100 bollard is also available in

the products lifting weight by up to 60%. This a static version to compliment the FINISHES allows the security product to be operated by manually retractable range. This Available in a variety of finishes: anyone. provides clients with a complete galvanised as standard with two yellow solution for perimeter protection and reflective bands, painted to any specified The SP100 is ideal for securing commercial access requirements. RAL colour or fitted with a stainless steel applications where traffic flow is minimal or sleeve. access is only required occasionally.

SP100 HIGH SECURITY BOLLARD RANGE

Manually Retractable Fixed

Bollard Diameter 127 mm / 141 mm (sleeved) 127 mm / 141 mm (sleeved)

Height Above 891 mm (to the top of the bollard) Supplied in a 1,391 mm length Ground 935 mm (to the top of the handle) Foundation 1,414 mm 491 mm Depth Galvanised. Painted to a specified Galvanised. Painted to a Finishes RAL colour or fitted with a specified RAL colour or fitted Available stainless steel sleeve. with a stainless steel sleeve.

V/3,500(N1)48/90:2.8/0.0 Engineered Solution Security Rating

SP400 MANUALLY OPERATED BOLLARD Operation Type: Manually Retractable

PRODUCT OVERVIEW The SP400 high security bollard can be Ideal for remote sites with little or limited manually operated through the simple use of access to an electricity supply or to secure SECURITY RATING a hand-held battery drill or a manual hand gateways which are used very infrequently. crank. The drill drives a small, hydraulic BSI PAS 68: 2010 pump which raises and lowers the product. A TG Access estimates the total saving for a 48 kph - V/7,500(N2)48/90:0/0 manual system to be up to 50% of a fully 64 kph - V/7,500(N2)64/90:2.3/2.7 Minimum tested array – 1 unit The high security bollard has been automated system.

successfully tested twice with a 7,500 kg

vehicle travelling at 48 kph and then at 64 The product has been designed and

kph. manufactured with serviceability in mind and

offers fantastic reliability. FINISHES No electricity supply is required to raise or Sheradised black finish as standard lower the bollard and the product can be Supplied as standard in a black sherardized with two, yellow reflective bands. operated with ease (can be raised or lowered finish with a stainless-steel lid and two machine bands. The product can be vinyl Product can be vinyl wrapped with a in 12 seconds). The socket which allows the drill to connect to and drive the bollard is wrapped if required with a bespoke design or bespoke design or advertising copy. protected behind a high security lock. advertising copy.

SP400 MANUALLY RETRACTABLE BOLLARD

Manually Retractable Bollard Diameter 209 mm with a 240 mm top lid Height Above Ground 998 mm Foundation Depth 1,509 mm

Sheradised black finish as standard with two, yellow Finishes Available reflective bands. Product can be vinyl wrapped with a bespoke design or advertising copy.

PAS 68: V/7,500(N2)48/90:0/0 Security Rating PAS 68: V/7,500(N2)64/90:2.3/2.7

SPTT HIGH SECURITY BOLLARD Operation Type: Manually Retractable

PRODUCT OVERVIEW significantly less than other high security The ATG Access SPTT, shallow foundation retractable bollards. bollard has a unique double retractable design SECURITY RATING Available as a manually operable variant; which ensures smooth operation and acts as a the product is operated through the simple depth saving feature. BSI PAS 68: use of a hand-held battery drill or a manual V/7,500(N2)/64/90:0.5/6.1

Most impact tested, retractable bollards have a hand crank. Minimum tested array – 1 unit

foundation depth of around 1,500 mm. This No electricity is required to raise or lower innovative product has a foundation depth the bollard and the product can be requirement of just 900 mm - less than a meter. operated with ease (can be raised in 12

seconds, lowered in 6). The product has been successfully impact FINISHES

tested in accordance with BSI PAS 68:2010, Ideal for remote sites with little or limited arresting a 7,500 kg vehicle travelling at 64 kph Sheradised black finish as access to an electricity supply or gateways (40 mph) and achieving less than a meter of standard. Option to sleeve with a used very infrequently. penetration. stainless-steel finish depending on application (210mm top, 282mm MANUALLY RETRACTABLE ATG Access estimates the total saving for top diameter). Product can be vinyl The SPTT bollard stands 1,000 mm high yet a manual system to be up to 50% of a wrapped with a bespoke design or only requires 900 mm foundation. This is completely automated system. advertising copy. A RAL finish is also possible on request.

SPTT MANUALLY RETRACTABLE BOLLARD

Manually Retractable Bollard Diameter 209 mm (top section), 280 mm (bottom section) Height Above Ground 1,000 mm Foundation Depth 900 mm Sheradised black finish as standard. Option to sleeve with a stainless-steel finish depending on application (210mm top, Finishes Available 282mm top diameter). Product can be vinyl wrapped with a bespoke design or advertising copy. A RAL finish is also possible on request.

Security Rating PAS 68: V/7,500(N2)64/90:0.5/6.1

STEALTH HIGH SECURITY BOLLARD Operation Type: Manually Operated

PRODUCT OVERVIEW This enables the product to secure ATG Access has designed a dynamic high applications without access to power or entrances which are not utilised very security bollard which can be operated with SECURITY RATING often, saving on hydraulics and control integral or external hydraulics or, in the systems associated with a fully Single Bollard Impact Test: absence of power, via a manual operating automated system. IWA 14: V/7200[N2A]/80/90:2.4 mechanism. Dual Bollard Impact Test: Tested twice as a single and double IWA 14: V/7200[N2A]/80/90:0.8/10.4 The Stealth bollard can be installed as an bollard configuration, both tests used a PAS 68: V/7500(N2)/80/90:0.795/10.4 entirely new installation or, can be retrofitted 7,200 kg N2a type vehicle travelling at 80 into an existing, impact tested bollard kph (50 mph). Both impact tests foundation. This was the first British product produced fantastic results with the bollards being fully operational after to be officially tested at MIRA under the IWA, international impact test standard impact.

2014. Supplied in a sheradised black finish as FINISHES standard with two yellow reflective Sheradised black finish as standard The manually retractable variant is operated bands. The product can also be vinyl with two yellow reflective bands. through the simple use of a hand-held wrapped with a bespoke design The battery drill or a manual hand crank. The drill Stealth Bollard system has been Product can be vinyl wrapped with a drives a small, hydraulic pump which raises designed with reliability and serviceability bespoke design or advertising copy. and lowers the product. in mind.

STEALTH MANUALLY RETRACTABLE BOLLARD Bollard Diameter 230 mm Height Above Ground 1,000 mm Foundation Depth 1,514 mm

Sheradised black finish as standard with two yellow reflective bands. Product can be vinyl Finishes Available wrapped with a bespoke design or advertising copy.

Single: IWA 14: V/7200[N2A]/80/90:2.4 Security Rating Twin: IWA 14: V/7200[N2A]/80/90:0.8/10.4 | PAS 68: V/7500(N2)/80/90:0.795/10.4

TITAN MK II HIGH SECURITY BOLLARD Operation Type: Manually Retractable

PRODUCT OVERVIEW No electricity or hydraulics are required to raise or lower the bollard and the product SECURITY RATING The Titan MK II is an impact tested can be operated with ease (can be raised bollard and is available in a variety of or lowered in 12 seconds). Impact Test Certification: operating sets and arrays. Tested to withstand a 7,500 kg vehicle travelling at This product is ideal for remote sites with PAS 68: V/7,500/80/90:4.0/33.5 80 kph (50 mph), this product is suitable little or limited access to an electricity Minimum tested array – 1 unit to protect against high velocity attacks. supply or gateways used very

infrequently.

The Titan MK II bollard is a strong, ATG Access estimates the total saving for economical, and effective way of a manual system to be up to 50% of the FINISHES protecting your key access points. This autom atic system. Galvanised and then painted as product can be manually operated standard. through the simple use of a hand-held All steel parts are hot dip galvanised as Option to fit with an aesthetic sleeve standard for corrosion protection. This battery drill or a manual hand crank. The (323mm diameter). drill drives a small, hydraulic pump which also ensures long term reliability of the raises and lowers the product. product.

TITAN MK II MANUALLY RETRACTABLE BOLLARD

Manually Retractable

Bollard Diameter 273 mm

Height Above Ground 1,000 mm

Foundation Depth 1,684 mm

Galvanised and then painted as standard. Option to fit Finishes Available with an aesthetic sleeve (323mm diameter).

Security Rating PAS 68: V/7,500/80/90:4.0/33.5

Fixed Bollards

Stopper 10 Bollard PAS 170: IT/2500/16/90:0.1 Stopper 20 Bollard PAS 170: IT/2500/32/90:1.8 Excalibur (90) Fixed Bollard PAS 68: V/1500(M1)/48/90:0/0 Excalibur (125) Fixed Bollard PAS 68: V/7500(N2)/32/90:0/0 SP30 Fixed Bollard PAS 68: V/7,500(N2)/48/90:0/0 SP40 Fixed Bollard PAS 68: V/7,500(N2)/64/90:4.0/16.7 SP400 Fixed Bollard Engineered PAS 68: 7,500 kg @ 48 kph & 64kph (dual tested) SP50 Fixed Bollard PAS 68: V/7,500(N3)/80/90:10.6/11.1 SP1000 Fixed Bollard Engineered PAS 68: 7,500 kg @ 80 kph Impeder 50HD Fixed Bollard PAS 68: V/7,500(N2)80/90:0.8/18.1 SPK12 Fixed Bollard PAS 68: V/7200(N2A)/80/90:0.0 Westminster Fixed Bollard PAS 68: V/7500(N3)/64/90:0/5.3 City of London Fixed Bollard PAS 68: V/7,500(N2)80/90:22.7/25.0

STOPPER BOLLARDS

Operation Type: Fixed, High Security Bollards

*Please Note: Photo is for illustration purposes only to show dimensions of the product. Bands and stainless-steel tops are not available with this product.

PRODUCT OVERVIEW Brought to you by ATG Access, the Bristorm This is to ensure that the product meets the STOPPER bollards comprise of CHS BSI PAS 68 accreditation and is installed as section with, if required, a pedestrian tested. SECURITY RATING guardrail as per BS 7818. STOPPER 10: The ‘Class 4D Guardrails’ are bolted to the PAS 170: IT/2500/16/90:0.1 The individual, high security bollards are bollards with shear nuts. The Bollards have Minimum tested array – 1 unit comprised of a standard 139/168 CHS HR additional lugs (50x10-55lg) mild steel when STOPPER 20: section cast-in concrete. They can be a guardrail is required. PAS 170: IT/2500/32/90:1.8 installed as stand-alone products to protect Minimum tested array – 1 unit sites against lower velocity attacks and also The height of the guardrails shall be 1,005 accidental impact. The product can also be mm from the finished ground level. built into pedestrian guardrail to be combined as a security and safety feature All guardrails and bollards are hot dipped FINISHES to keep pedestrians safe and vehicles galvanized to BS EN ISO 1461 after Steelwork, hot-dip galvanised to BS EN excluded from an area or walkway. fabrication. ISO 1461; strands zinc plated and HDPE

coated as per EN 10264-2:2002 or EN

The Bollards are to be spaced at a Additional coatings can be applied to 10255-2. Thicker coatings and powder maximum length of 1,360 mm or 1,330 mm achieve specific project coating thickness or coatings are available on client request. centre to centre. specific client aesthetic requirements. All Bollards are 1605mm long x Ø 168/139mm diameter. STOPPER BOLLARDS STOPPER 10 STOPPER 20 Height 1,005 mm 1,005 mm Foundation Dimensions (mm) 600 x 600 x 725 – Rebar Required 600 x 600 x 725 – Rebar Required Minimum Array Single Bollard Single Bollard Post Spacing 1,330 mm 1,360 mm Angular Corner Range 55° to 175° 55° to 175° Test Specification BSI PAS 170 BSI PAS 170 Test Certification PAS 170: IT/2500/16/90:0.1 PAS 170: IT/2500/32/90:1.8 Diameter 140 mm 168 mm

EXCALIBUR SECURITY FIXED BOLLARD Operation Types: Fixed Security Bollard

PRODUCT OVERVIEW 90 MM VARIANT The Excalibur, manganese steel bollard Successfully tested to withstand a SECURITY RATING is available in two certified variants. The 1,500 kg vehicle travelling at 30 mph, product can be supplied with either a 90 achieving no impact penetration; this 90 mm Model: V/1,500(M1)/48/90:0/0 mm or a 125 mm diameter. product is ideal to provide perimeter PAS 68: Minimum tested array – 1 unit protection for sites at risk of a low Manganese steel is a unique material 125 mm Model: velocity attack. A shallow foundation PAS 68: V/7,500(N2)/32/90:0/0 which has extreme anti-wear properties, product only requires 300 mm of Minimum tested array – 1 unit is very resistant to abrasion and has high depth to install. impact strength.

125 MM VARIANT All of these characteristics make the Successfully tested to withstand a material ideal to be used within high 7,500 kg vehicle travelling at 20 mph, FINISHES A manganese steel core fitted with a security bollard manufacture and design. achieving no impact penetration; this stainless-steel sleeve as standard. The Excalibur bollard can be supplied in product is ideal to protect urban,

its raw state, painted to any RAL colour pedestrianized areas from vehicular specified or fitted with an aesthetic Other sleeves can be supplied on attack. The 125 mm variant is also consultation with our technical team. sleeve. The bollards slim profile makes a vailable as a lift-out bollard allowing this product versatile to be able to fit into occasional access to vehicles if any scheme’s aesthetics. required.

EXCALIBUR FIXED BOLLARD Fixed – 90 mm (d) Fixed – 125 mm (d) Bollard Diameter 90 mm 125 mm Height Above Ground 900 mm 900 mm Foundation Depth 300 mm 300 mm A manganese steel core fitted with a stainless- A manganese steel core fitted with a stainless- steel sleeve as standard. Other sleeves can be steel sleeve as standard. Other sleeves can be Finishes Available supplied on consultation with our technical supplied on consultation with our technical team. team. Security Rating PAS 68: V/1,500(M1)/48/90:0/0 PAS 68: V/7,500(N2)/32/90:0/0

SP30 HIGH SECURITY FIXED BOLLARD Static Security Bollard Operation Type:

PRODUCT OVERVIEW Successfully impact tested to 48 kph using The ATG Access, Fixed SP30 Bollard is a tall a 7,500 kg vehicle and achieving zero and slim product offering site security rated to penetration, this product is only available withstand a 7,500 kg vehicle travelling at 48 as a traditional foundation, fixed bollard. SECURITY RATING kph. Galvanised as standard, the bollard is Meets the BSI PAS 68 rating when also supplied with two yellow reflective bands. M ust be installed within an approved, installed to the PAS 69 certification. Alternatively, the bollard can be nylon coated reinforced concrete foundation which to any RAL colour specified or fitted with a includes a rebar structure; minimum V/7,500(N2)/48/90:0/0 decorative sleeve. embedment depth required of 550 mm.

This product provides a cost-effective solution For sites requiring perimeter protection for perimeter security requirements and with limited excavation depth available, meets the security rating for most perimeter ATG Access’s range of shallow security projects. foundation fixed bollards may be more FINISHES Galvanised as standard with banding ATG Access has a variety of complimentary suitable; available with depths as little as optional. Can be powder coated to a automatic, lift-out or manually retractable 40 mm. specified RAL finish or fitted with an products for additional vehicle access aesthetic sleeve . requirements in order to provide a holistic perimeter security offering.

SP40 HIGH SECURITY FIXED BOLLARD

Fixed Bollard Diameter 219 mm Height Above Ground 1,000 mm Foundation Depth 550 mm (Minimum Embedment Required)

Finishes Available Galvanised as standard; can be coated to a specified RAL colour or fitted with an aesthetic sleeve.

Security Rating PAS 68: V/7,500(N2)/48/90:0/0

SP40 HIGH SECURITY FIXED BOLLARD Fixed Security Bollard Operation Type:

PRODUCT OVERVIEW SP40 FIXED BOLLARD The ATG Access High Security Fixed SP40 S uccessfully impact tested to 64 kph Bollard is a tall and slim product, offering a with a 7,500 kg vehicle, this product is SECURITY RATING galvanised finish as standard. Alternatively, perfect for both urban and industrial Meets the BSI PAS 68 rating when the bollard can be coated to any RAL colour security scenarios. installed to the PAS 69 certification. specified or fitted with a decorative sleeve. Only available in a fixed variation, this V/7,500(N2)/64/90:4.0/16.7 This product provides a cost-effective product must be installed within an Minimum tested array – 1 unit solution for perimeter security requirements approved, reinforced concrete and meets the security rating for most foundation. With a minimum embedment perimeter security projects. of 500 mm, this product must be installed to comply with the PAS 69 1.2 m spacing ATG Access has a variety of complimentary requirements. automatic, lift-out or manually retractable FINISHES products for additional vehicle access For sites requiring perimeter protection Galvanised as standard with banding requirements in order to provide a holistic with limited excavation depth available, optional. Can be powder coated to a perimeter security offering. ATG Access’s range of shallow specified RAL finish or fitted with an foundation fixed bollards may be more aesthetic sleeve. suitable.

SP40 HIGH SECURITY FIXED BOLLARD

Fixed Bollard Diameter 219 mm Height Above Ground 1,000 mm Foundation Depth 500 mm (Minimum Embedment Required)

Galvanised as standard with banding optional. Can be powder coated to a specified RAL finish or Finishes Available fitted with an aesthetic sleeve.

Security Rating PAS 68: V/7,500(N2)/64/90:4.0/16.7

SP400 HIGH SECURITY BOLLARD Operation Type: Fixed Security Bollard

PRODUCT OVERVIEW The ATG Access SP400 is a fixed high The ATG Access SP400 High Security security bollard which is offered as an Fixed Bollard is a tall and slim product; engineered solution to complement our SECURITY RATING supplied in a galvanised finish as SP400 automatic bollard which has Engineered Solution; based on the standard. Alternatively, the bollard can be been successfully impact tested to both automatic variant tested with a 7,500 kg coated to any RAL colour specified or 48 kph using a 7,500 kg vehicle and 64 vehicle at both 48 and 64 kph. fitted with a decorative sleeve. kph using a 7,500 kg vehicle. Minimum tested array – 1 unit.

This product provides a cost-effective This product must be installed within an solution for perimeter security approved, reinforced concrete requirements and meets the security foundation and at the required 1.2 m rating for most perimeter security projects. spacing. FINISHES

Galvanised as standard. Can be powder ATG Access has a variety of For sites requiring perimeter protection coated to a specified RAL finish or fitted complimentary automatic, lift-out or with limited excavation depth available, with an aesthetic sleeve (219mm manually retractable products for ATG Access’s range of shallow diameter). additional vehicle access requirements in foundation fixed bollards may be more order to provide a holistic perimeter suitable. security offering.

SP400 HIGH SECURITY FIXED BOLLARD

Fixed Bollard Diameter 203 mm or 219 mm with a standard sleeve

Height Above Ground 1,000 mm

Foundation Depth Minimum of 500mm of bollard into foundation. Overall core length - 1,700mm.

Galvanised as standard. Can be powder coated to a specified RAL finish or fitted with an Finishes Available aesthetic sleeve (219mm diameter).

Security Rating Engineered Solution: 7,500kg at 48kph & 64 kph.

SP50 HIGH SECURITY FIXED BOLLARD Fixed Security Bollard Operation Type:

PRODUCT OVERVIEW ATG Access’s High Security, Fixed The ATG Access SP50 is a fixed high SP50 Bollard is a cost-effective solution security bollard which has been SECURITY RATING for providing certified perimeter successfully impact tested to 80 kph Meets the BSI PAS 68 rating when protection against high velocity attacks. (50 mph) using a 7,500 kg vehicle. installed to the PAS 69 certification.

V/7,500(N3)/80/90:10.6/11.1 The product is supplied hot dip Only available in a fixed variation, this Minimum tested array – 1 unit galvanised as standard with two product must be installed within an optional yellow reflective bands. approved, reinforced concrete Alternatively, the bollard can be coated foundation. 500 mm, minimum with any RAL colour required or fitted embedment is required; this product with a decorative sleeve. must be installed according to PAS 69 with 1.2 m spacings. FINISHES

ATG Access has a variety of Galvanised as standard with banding optional. Can be powder coated to a complimentary automatic, lift-out or For sites requiring perimeter manually retractable products for protection with limited excavation specified RAL finish or fitted with an aesthetic sleeve. additional vehicle access requirements depth available, ATG Access’s range in order to provide a holistic perimeter of shallow foundation fixed bollards security offering. may be more suitable.

SP50 HIGH SECURITY FIXED BOLLARD

Fixed Bollard Diameter 273 mm Height Above Ground 1,080 mm Foundation Depth 500 mm (Minimum Embedment Req.) Galvanised as standard with banding optional. Can be powder coated to a Finishes Available specified RAL finish or fitted with an aesthetic sleeve. Security Rating PAS 68: V/7,500(N3)/80/90:10.6/11.1

SP1000 HIGH SECURITY BOLLARD Operation Type: Fixed Security Bollard

PRODUCT OVERVIEW The ATG Access SP1000 is a fixed The ATG Access SP1000 High Security high security bollard which is offered Fixed Bollard has been engineered to offer as an engineered solution to SECURITY RATING clients protection against high velocity complement our SP1000 automatic Engineered Solution; based on the bollard which has been successfully attacks. Supplied with all component parts automatic variant tested with a 7,500 kg galvanised and then fitted with an aesthetic impact tested to 80 kph (50 mph) vehicle at 80kph (50mph). sleeve. Bespoke sleeves can be designed using a 7,500 kg vehicle. Minimum tested array – 1 unit. if required after consultation with our technical team. This product must be installed within an approved, reinforced concrete This product provides a cost-effective foundation and at the required 1.2 m solution for perimeter security requirements spacing. FINISHES and meets the security rating for most Component parts supplied galvanised perimeter security projects. For sites requiring perimeter as standard. The core is sleeved as

ATG Access has a variety of complimentary protection with limited excavation standard with a stainless-steel sleeve automatic, lift-out, or manually retractable depth available, ATG Access’s range (323mm diameter). Bespoke sleeves products for additional vehicle access of shallow foundation fixed bollards can be designed and supplied after consultation with our technical team. requirements to provide a holistic perimeter may be more suitable. security offering.

SP1000 HIGH SECURITY FIXED BOLLARD

Fixed

Bollard Diameter Core diameter of 305 mm. Standard sleeved diameter 323 mm.

Height Above Ground 1,000 mm

Foundation Depth Minimum of 500mm of bollard into foundation. Overall core length - 1,650mm.

Component parts supplied galvanised as standard. The core is sleeved as standard with a Finishes Available stainless-steel sleeve (323mm diameter). Bespoke sleeves can be designed and supplied after consultation with our technical

Security Rating Engineered Solution: 7,500kg at 80 kph (50 mph)

IMPEDER BOLLARD – 50 HD

Operation Type: Fixed, High Security Bollard

PRODUCT OVERVIEW The steelwork is hot-dip galvanised to Brought to you by ATG Access, the BS EN ISO 1461 as standard. Other SECURITY RATING (PAS 68) Bristorm IMPEDER range of fixed, high aesthetic finishes are available on client security bollards are made up of request such as powder coating to a Performance Rating: BSI PAS 68 standard CHS sections, cast-in specified RAL colour or, fitting an V/7,500[N2]/80/90:0.8/18.1 concrete or socketed. aesthetic sleeve. Minimum Tested Array – 1 Unit

The IMPEDER range of bollards has Bollards are ideal to protect areas which successfully withstood a range of still require access for pedestrians. different impact tests certifying the Unlike road blockers, fences and gates, range to be compliant with the PAS 68 bollards remain a friendlier and less & IWA 14 standard at different speeds alarming security measure for areas FINISHES to suit varying client risk profiles. where security equipment is meant to Steelwork, hot-dip galvanised to BS EN blend into the surrounding environment. ISO 1461. Set within either a concrete and rebar Bollards also aid pedestrian flow Alternative aesthetic options are foundation or an ‘I Beam’, these through densely populated areas such available to suit client requests such as products are supplied with full as fan zones outside stadiums or to powder coating and aesthetic sleeves. installation instructions and ‘General protect railway concourses or airport Arrangement Drawings’. terminal buildings.

IMPEDER BOLLARDS

Impeder 50 HD

Height 1,010 mm Diameter 324 mm Foundation Dimensions (mm) 2,000 x 1,200 x 800 mm Minimum Arrangement Single bollard Post Spacing 1,500 mm Test Specification BSI PAS 68 Test Rating V/7,500[N2]/80/90:0.8/18.1

SPK12 HIGH SECURITY FIXED BOLLARD Operation Types: Fixed Security Bollard

PRODUCT OVERVIEW The ATG Access SPK12 Fixed Bollard Impact tested in accordance with IWA offers a cost-effective perimeter protection 14, this SPK12 variation has been SECURITY RATING solution where the highest security successfully tested to arrest a 7,200 kg Tested in accordance with the performance is required. vehicle traveling at 80 kph (50 mph). International Workshop Agreement 2014. Achieving less than a meter of penetration A removable variant of this product when impacted with a 7,500 kg vehicle (SPK12R) is available to provide a Fixed: V/7,200(N2A)/80/90:0 traveling at 80 kph; this product is suitable perimeter with occasional access; this Minimum tested array – 5 units. for critical national infrastructure protection removable bollard is the strongest where standoff distances available currently tested in the perimeter between a building perimeter and the security market. building itself are minimal. FINISHES This product is suitable for HCIS Concrete filled bollard finished in either The SPK12 fixed high security bollard projects. The concrete filled tube is a galvanised or a painted finish. Can be consists of a steel, concrete filled tube supplied galvanised as standard and painted to any specified RAL colour. placed into a reinforced and certified can be painted to a specified RAL foundation – concrete and rebar structure. colour if required.

SPK12 HIGH SECURITY FIXED BOLLARD

Fixed Bollard Diameter 273 mm Height Above Ground 1,000 mm Foundation Depth 1,200 mm

Concrete filled bollard finished in either a galvanised or a painted finish. Can be painted to any Finishes Available specified RAL colour.

Security Rating IWA 14: V/7,200(N2A)/80/90:0.0

WESTMINSTER FIXED HVM BOLLARD Operation Types: Fixed Security Bollard

PRODUCT OVERVIEW The ATG Access Westminster, Fixed High Installed within a foundation depth of Security Bollard is manufactured from 750 mm, the Westminster fixed bollard SECURITY RATING micro-engineered steel which has a high is ideal for applications where impact ‘toughness’ and the ability to absorb foundation depth is not an issue and Traditional Depth Static: massive amounts of energy without where no restrictions apply. PAS 68: V/ 7500[N3]/64/90:0.0/5.3 fracturing. This material is incredibly strong Minimum tested array – 3 units. and corrosion resistant. The foundation for this product is a concrete and rebar structure with 1.2

This heritage style bollard is available in a spacings needing to be adhered to to lift-out, shallow foundation or traditional comply with PAS 69. depth fixed model. You will find the City of Westminster With a ribbed profile and peaked top, within crest displayed on most of the bollards FINISHES the front facia there is a specifically installed within the Westminster area. Supplied in cast Manganese Steel, designed section to enable a corporate You will find these incredibly strong painted black. There is space on the front face of the bollard to attach a crest or logo or crest to be inserted. The product products as far afield as Melbourne, can be supplied unpainted or with a primed Australia! moulding if relevant. finish. Typically finished in black paint.

WESTMINSTER FIXED BOLLARD

Fixed 260 mm (front face) Bollard Diameter 125 mm (side profile) Height Above Ground 1,065 mm Foundation Depth 750 mm Supplied in cast Manganese Steel, painted black. Finishes Available There is space on the front face of the bollard to attach a crest or moulding if relevant.

Security Rating PAS 68: V/7500[N3]/64/90:0.0/5.3

CITY OF LONDON FIXED BOLLARD Operation Types: Fixed Security Bollard

PRODUCT OVERVIEW

The ATG Access High Security City of Cast in Manganese steel, this material SECURITY RATING is incredibly robust, cannot be cut and London Bollard has the integral good looks is extremely hardwearing and corrosion and heritage appearance of the traditional Traditional Depth Static: City of London bollard which can be found all resistant. PAS 68: V/7,500(N2)80/90:22.7/25.0 over London’s square mile. Minimum tested array – 1 unit Requiring 600 mm of foundation depth, ATG Access have taken the traditional design this product is ideal for applications and engineered an impact tested version of where foundation depth is not an issue the heritage design. The impact tested variant and where no restrictions apply. The is also available in a lift-out, or shallow foundation required, a concrete, rebar foundation model. foundation with 1.2 m spacings to

comply with the PAS 69. FINISHES The product is finished and painted with the distinctive black, red and white design seen If depth restrictions do apply, the City of Manganese steel, painted to the across the square mile City of London. London bollard is also available as a traditional City of London Bollard Impact tested to withstand a high velocity shallow foundation product - installed design – red, black and white. attack, this product withstood impact from a within a foundation depth of just 150 Other colours are available. 7,500 kg vehicle travelling at 80 kph. mm.

CITY OF LONDON FIXED BOLLARD

Fixed 240 mm (base) Bollard Diameter 160 mm (top) Height Above 1,390 mm Ground Foundation Depth 600 mm Painted Manganese Steel – Red, Black & Finishes Available White

Security Rating PAS 68: V/7,500(N2)80/90:22.7/25.0

Shallow Foundation Bollards

SP180 Shallow Mount Bollard Engineered PAS 68: 3,500 kg @ 48 kph. A resistance of 314 KJ + Populous Bridge Protection Bollard PAS 68: V/7,500(N2)/48/30:0.6/0.0 IWA 14: V/7,200(N2A)/48/30:0.7 SP400 Shallow Foundation Bollard PAS 68: V/7500(N2)/48/90:0/0 Impeder Bollard 30 S PAS 68: V/7,500[N2]/48/90:0.0/0.0 SP1000 Shallow Foundation Bollard (112) PAS 68: V/7500(N2)/64/90:1.2/3.1 SP1000 Shallow Foundation Bollard (150) PAS 68: V/7500(N2)64/90:0.1/0.0 PAS 68: V/7500(N2)80/90:5/14 Impeder Bollard 50 S IWA 14: V/7,200[N2A]/80/90:3.0 Centurion Shallow Foundation Bollard IWA 14: V/7200(N2A)/80/90:1.9 Gladiator Shallow Foundation Bollard PAS 68: V/7500(N3)/80/90:3.6/7.9 ASTM: M50 P1 ASTM: M50 P2 Westminster Shallow Foundation Bollard PAS 68: V/7500(N2)/64/90:0/3.7 City of London Shallow Mount Bollard PAS 68: V/7,500(N3)80/90:19.2/25.0

SP180 SHALLOW MOUNT BOLLARD Operation Type: Shallow Foundation, Fixed

PRODUCT OVERVIEW This reduces civil installation costs dramatically and enables the product to be

ATG Access is proud to launch a new installed and secure in no time at all. SECURITY RATING family of bollards, the SP180 range. This Disruption is minimised when excavating range is designed to arrest a 3,500 kg and the time needed on site to install such vehicle travelling at 48 kph (30 mph): a security measures is reduced considerably. Shallow Foundation, Fixed Bollard: resistance of 314 KJ+. Impact Resistance of 314 KJ+ Often the cost of redirecting underground services is the main installation cost Minimum tested array – 3 units. Not only is this range designed to associated with traditional depth static withstand substantial impact, but it also bollards in addition to large areas of offers a comprehensive range of options excavation. and operation methods including shallow foundation, lift-out, and automatic Shallow foundation bollards save major FINISHES variants. disruption and thousands in unexpected Galvanised as standard. Can be costs. powder coated to a specified RAL The shallow foundation variant of the SP180 bollard has a base with a depth of finish or fitted with an aesthetic Galvanised as standard. Can be powder sleeve (219 mm diameter). just 112 mm. When installed, the overall coated to a specified RAL finish or fitted with depth required is just 182 mm (depth plus an aesthetic sleeve (219 mm diameter). surface finishing).

SP180 SHALLOW FOUNDATION BOLLARD

Shallow Fixed Bollard Bollard Diameter 180 mm / 219 mm (sleeved) Height Above Ground 700 mm Foundation Depth 182 mm

Galvanised as standard. Can be powder Finishes Available coated to a specified RAL finish or fitted with an aesthetic sleeve (219 mm diameter).

Security Rating Impact resistance of 314 KJ+

POPULUS BRIDGE PROTECTION BOLLARD Operation Type: Shallow Foundation, Fixed

PRODUCT OVERVIEW A minimum array of 7 bollards is required ATG Access are very proud to be able to and then individual modules can be added SECURITY RATING launch the next generation in bridge in singular units to cover the length protection technology. Our Populus Bollard required. The lay out can accommodate a Populus Bridge Protection Bollard: has a revolutionary very slim core, able to fit gap in the foundation between adjacent a wealth of aesthetic options and a height arrays to accommodate bridge expansion BSI IWA 14: above ground deemed ‘cycle friendly’. joints . V/7,200(N2A)/48/30:0.7 Minimum tested array – 7 units This system was impact tested at the MIRA This innovative product is not designed to testing facility in March 2020 to both the IWA be reliant on digging into a sub-structure BSI PAS 68: 14 & PAS 68 standard. Successfully arresting unlike other systems and can articulate to V/7,500(N2)/48/30:0.6/0.0 a 7,500/7,200 kg vehicle travelling at 48 kph. accommodate cambers and contours in a Minimum tested array – 7 units The test simulated a bridge attack and so as bridge structure. such, the angle of attack was 30º. The system performed incredibly well and achieved Aesthetically, due to a low bollard height, minimal penetration (<0.5m). the system is cycle friendly. The bollard can be sleeved with a stainless-steel aesthetic FINISHES This system only requires a true depth of 40 sleeve, still providing an incredibly slim Slim, galvanised high security core mm for installation; no other upstanding profile. structure is required. No mechanical bolting (153 mm) which can be painted to or fixings are required during installation, the Handrails and fencing can be any requested RAL specification. array simply sits within a very shallow accommodated to restrict pedestrian excavation which may be planed away. access anywhere along the array. Historic Can be fitted with an aesthetic or heritage sleeve designs can be sleeve; handrails or fencing can Installation of the test array was completed accommodated if required. The slim high also be accommodated if required. by MIRA civil engineers who had not seen security core of this system can easily the system before in just under 40 minutes. accommodate special aesthetics

POPULUS BRIDGE PROTECTION BOLLARD

Bollard Diameter 153 mm (galvanised core); 168 mm sleeved (any sleeve specification can be accommodated) Height Above Ground 800 mm (above finished floor level) Foundation Depth 40 mm (true depth) Galvanized core which can be painted to any RAL colour requested. Historic / heritage sleeve designs can be accommodated if required; the slim high security core of this system can easily accommodate Finishes Available special aesthetics. Handrails and fencing can be accommodated to restrict pedestrian access anywhere along the array. BSI IWA 14: 7,200 kg @ 48 kph (30 mph) - V/7,200(N2A)/48/30:0.7 Security Rating BSI PAS 68: 7,500 kg @ 48 kph (30 mph) - V/7,200(N2)/48/30:0.6/0.0

Reference: Populus XA

SP400 SHALLOW FOUNDATION BOLLARD Operation Type: Shallow Foundation, Fixed

PRODUCT OVERVIEW The shallow foundation base units can The ATG Access SP400 Shallow Foundation be supplied in many shapes (including SECURITY RATING Bollard range includes a shallow foundation fixed custom shapes) allowing bollards to be and lift-out variant. The range also includes the fitted around street corners and existing industry’s first impact tested lift-out product street furniture items such as bins and Shallow Foundation, Fixed Bollard: installed directly and impacted within a benches. PAS 68: V/7,500(N2)48/90:0/0 Minimum tested array – 3 units. suspended slab foundation. Minimal time and disruption is needed The SP400, impact tested bollard has a slim to deploy shallow foundation products. profile making this product aesthetically pleasing The base plates are laser cut with and able to be fitted with a multitude of sleeve directional arrows and part numbers FINISHES and street furniture options which can be cross referenced to site Galvanised as standard; alternatively, layout drawings. The fixed shallow foundation, high security this product can be painted to any

SP400 bollard can be installed within a specified RAL colour or finished with a This all ensures the installation of the foundation depth of just 172 mm. This enables decorative sleeve. This product can effective perimeter protection to be installed product is straight forward, causing even be incorporated into street furniture within urban environments which typically have a minimal disruption to site and street if required. dense network of underground services which scenes. cost a fortune to redirect or move.

SP400 SHALLOW FOUNDATION BOLLARD

Shallow Fixed Bollard

Bollard Diameter 203 mm / 219 mm (sleeved)

Height Above Ground 980 mm Foundation Depth 172 mm (plus surface finishing) Galvanised as standard. Can be powder coated to a specified RAL finish or fitted with Finishes Available an aesthetic sleeve (219mm) which can feature bands if required.

Security Rating PAS 68: V/7,500(N2)48/90:0/0

IMPEDER BOLLARDS – 30 S & 50 S

Operation Type: Fixed, Shallow High Security Bollards

PRODUCT OVERVIEW The steelwork is hot-dip galvanised to BS Brought to you by ATG Access, the Bristorm EN ISO 1461 as standard. Other aesthetic SECURITY RATING IMPEDER range of fixed, high security finishes are available on client request such Impeder 30 S bollards are made up of standard CHS as powder coating to a specified RAL colour PAS 68: V/7,500[N2]/48/90:0.0/0.0 sections, cast-in concrete or socketed. or, fitting an aesthetic sleeve. Minimum tested array – 2 units

The IMPEDER range of bollards has Bollards are ideal to protect areas which still Impeder 50 S successfully withstood a range of different require access for pedestrians. Unlike road IWA 14: V/7,500[N2A]/80/90:3.0 impact tests certifying the range to be blockers, fences and gates, bollards remain Minimum tested array – 2 units compliant with the PAS 68 & IWA 14 a friendlier and less alarming security standard at different speeds to suit varying measure for areas where security equipment client risk profiles. is meant to blend into the surrounding FINISHES environment. Bollards also aid pedestrian Steelwork, hot-dip galvanised to BS EN Set within either a concrete and rebar flow through densely populated areas such ISO 1461. foundation or an ‘I Beam’, these products as fan zones outside stadiums or to protect Alternative aesthetic options are available are supplied with full installation instructions railway concourses or airport terminal to suit client requests such as powder and ‘General Arrangement Drawings’. buildings. coating and aesthetic sleeves.

IMPEDER BOLLARDS

Impeder 30S Impeder 50S

Height 1,000 mm 1,006 mm Diameter 219 mm 324 mm

Foundation Dimensions (mm) 1,400 x 2,800 x 400 (or cont.) 3,000 x 2,000 x 300 (or cont.)

Minimum Arrangement Twin bollards Twin bollards Post Spacing 1,400 mm 1,500 mm Test Specification BSI PAS 68 IWA 14-1

Test Rating V/7,500[N2]/48/90:0.0/0.0 V/7,200[N2A]/80/90:3.0

SP1000 SHALLOW MOUNT BOLLARD Operation Type: Shallow Foundation, Fixed

PRODUCT OVERVIEW Minimal time and disruption is needed to The SP1000 shallow foundation, high deploy shallow foundation products. The security bollard is ideal for providing base plates are laser cut with directional SECURITY RATING perimeter protection for sites at risk of the arrows and part numbers which can be PAS 68 - (112 mm Foundation) highest velocity attack. The product is cross referenced to site layout drawings. V7,500(N2)64/90:1.2/3.1 available as a static shallow foundation or This all ensures the installation of the Minimum tested array – 3 units. removable bollard. product is straight forward. PAS 68 - (150 mm Foundation) Shallow foundation design enables The SP1000 shallow foundation static is V/7,500(N2)80/90:5/14 effective perimeter protection to be available in two certified variants. The 150 V/7,500(N2)64/90:0.1/0.0 installed within urban environments which Minimum tested array – 5 units. mm deep shallow foundation static has been typically have a dense network of successfully tested with a 7,500 kg vehicle underground services which cost a fortune travelling at both 64 and 80 kph. An even to redirect. The shallow foundation units shallower version is also available requiring can be supplied in a multitude of shapes just 112 mm to install. This variant has been allowing bollards to be fitted around tested twice to withstand a 7, 500 kg vehicle FINISHES existing street furniture items such as bins travelling at both 48 and 64 kph. Galvanised as standard. Can be and benches. This allows for bollards to be powder coated to a specified RAL fitted easily around street corners and Can be supplied with reflective banding or finish or fitted with an aesthetic curved roads DDA compliant banding to increase visibility sleeve (323mm) which can feature for pedestrians. bands if required.

SP1000 SHALLOW FOUNDATION BOLLARD

112 mm Depth Variant 150 mm Depth Variant Bollard Diameter 305 mm / 323 mm (sleeved) Height Above Ground 1,020 mm 1,000 mm Foundation Depth 112 mm 150 mm

Galvanised as standard. Can be powder coated to a specified RAL finish or fitted with an Finishes Available aesthetic sleeve (323mm) which can feature bands if required.

PAS 68: V/7,500(N2)80/90:5/14 Security Rating PAS 68: V/7,500(N2)64/90:1.2/3.1 V/7,500(N2)64/90:0.1/0.0

CENTURION HIGH SECURITY BOLLARD Operation Type: Shallow Foundation, Fixed

PRODUCT OVERVIEW Minimal time and disruption is needed The Centurion Shallow Foundation Bollard is to deploy shallow foundation products SECURITY RATING the strongest, slimmest, and shallowest bollard as the base plates are laser cut with in the industry. Tested and certified to the IWA directional arrows and part numbers 14 standard, the Centurion withstood a 7,200 IWA 14: which can be cross referenced to site kg vehicle travelling at 50 mph achieving less V/7200[N2A]/80/90:1.9 layout drawings. This all ensures the than 2 meters of penetration. Minimum tested array – 3 units. installation of the product is straight

forward, causing minimal disruption to Designed to be installed within a foundation site and street scenes. depth of just 170 mm, this enables effective perimeter protection to be installed within urban environments which typically have a In addition, Centurion bollards can dense network of underground services which also be embedded within a planter FINISHES Component parts supplied galvanised cost a fortune to redirect or move. design to provide concealed protection against vehicle attacks. as standard. The core is sleeved as The shallow foundation base units can be standard with a stainless steel, supplied in a multitude of shapes allowing An incredibly strong product which is rectangular sleeve (324x176mm). bollards to be fitted around street corners and supplied with an aesthetic sleeve as Bespoke sleeves can be designed and existing street furniture items such as bins and standard, to almost any architectural supplied after consultation with our benches. design. technical team.

CENTURION SHALLOW FOUNDATION BOLLARD

Shallow Fixed Bollard

Bollard Diameter 150mm (front face) x 300mm (profile)

Height Above Ground 1,100 mm Foundation Depth 170 mm

Component parts supplied galvanised as standard. The core is sleeved as standard with a Finishes Available stainless steel, rectangular sleeve (176 mm x 324 mm). Bespoke sleeves can be designed and supplied after consultation with our technical team.

Security Rating IWA 14: V/7,200(N2A)80/90:1.9

GLADIATOR HIGH SECURITY BOLLARD Operation Type: Shallow Foundation, Fixed

PRODUCT OVERVIEW Minimal time and disruption is needed to deploy shallow foundation products. The ATG Access shallow foundation Gladiator The base plates are laser cut with bollard has been tested to both the ASTM and SECURITY RATING directional arrows and part numbers PAS 68 standard: withstanding a 7,500 kg vehicle which can be cross referenced to site travelling at 80 kph. This shallow bollard is one of PAS 68: layout drawings. the strongest in today’s hostile vehicle mitigation V/7500[N3]/80/90:3.6/7.9 Minimum tested array – 5 units. industry. This all ensures the installation of the

product is straight forward, causing ASTM: M50 P1 | M50 P2 The fixed shallow foundation, high security minimal disruption to site and street Minimum tested array – 5 units. bollard can be installed within a foundation depth scenes. from just 150 mm. This enables effective perimeter protection to be installed within urban Hot dip galvanised as standard; the environments which typically have a dense bollard can then be finished with a network of underground services which cost a polyester coating in any specified RAL FINISHES fortune to redirect or move. colour for maximum corrosion Galvanised as standard. Can be protection. Alternatively, aesthetic The shallow foundation base units can be fitted with an aesthetic sleeve sleeves can be supplied for sites with supplied in a multitude of shapes allowing (323mm) which can feature specific decorative requirements. bollards to be fitted around street corners and bands if required or painted to existing street furniture items such as bins and any specified RAL colour. benches.

GLADIATOR SHALLOW FOUNDATION BOLLARD

PAS 68 Tested System ASTM Tested System: ASTM Tested System: M50 P2 M50 P1

Bollard Diameter 305 mm | 323 mm with sleeve Height Above Ground 1,200 mm 1,220 mm 1,100 mm

Foundation Depth 150 mm 203 mm 203 mm

Galvanised as standard. Can be fitted with an aesthetic sleeve (323mm) which can feature bands if Finishes Available required or painted to any specified RAL colour.

PAS 68: ASTM: ASTM: Security Rating V/7,500(N3)/80/90:3.6/7.9 M50 P1 M50 P2 Minimum tested array – 5 units Minimum tested array – 5 units Minimum tested array – 5 units

WESTMINSTER SHALLOW MOUNT BOLLARD Operation Type: Shallow Foundation, Fixed

PRODUCT OVERVIEW is a revolutionary engineering development The Westminster high security bollard is manufactured from micro-engineered steel and sits at the cutting edge of industry SECURITY RATING which has a high impact ‘toughness’ and the technology. The foundation can be installed ability to absorb massive amounts of energy at a fraction of the depth underground that without fracturing. traditional, impact tested products require. Shallow Foundation Bollard: PAS 68: V/7500 (N2) 64/90:0/3.7 This heritage style bollard is available in a lift- Shallow foundation technology has proved Minimum tested array – 3 units out, shallow foundation or traditional depth invaluable within city centres, outside fixed model. Only ATG has the airports, skyscrapers and other applications manufacturing rights to the impact tested, where underground services, car parks and Westminster steel bollard. basements prevent standard depth equipment being installed. With a ribbed profile and peaked top, within FINISHES the front facia there is a specifically designed The traditional, impact tested heritage Supplied in raw, cast Manganese section to enable a corporate logo or crest to bollard can be installed within a foundation Steel. There is space on the front face be inserted. Supplied unpainted or with a depth of just 150 mm. of the bollard to attach a crest or primed finish. moulding if relevant. On request the A Lift-Out variant is available to compliment product can be primed and painted. the shallow foundation static product to SHALLOW FOUNDATION allow for very occasional access to areas The ATG Access shallow foundation system within a busy city centre.

WESTMINSTER SHALLOW FOUNDATION BOLLARD

Shallow Foundation 260 mm (front face), Bollard Diameter 125 mm (side profile)

Height Above Ground 1,065 mm Foundation Depth 150 mm Supplied in raw, cast Manganese Steel. There is space on the front face of the bollard to attach a Finishes Available crest or moulding if relevant. On request the product can be primed and painted.

Security Rating PAS 68: V/7500 (N2) 64/90:0/3.7

CITY OF LONDON SECURITY BOLLARD Operation Types: Shallow Foundation Bollard

PRODUCT OVERVIEW The ATG Access shallow foundation system is a revolutionary engineering The City of London Bollard has the development and sits at the cutting edge integral good looks and heritage SECURITY RATING of industry technology. The foundation appearance of the traditional City of can be installed at a fraction of the depth London bollard which can be found all Shallow Foundation: underground that traditional, impact over London’s square mile. PAS 68: V/7,500(N3)80/90:19.2/25.0 tested products require. Minimum tested array – 3 units.

ATG have taken the traditional design Shallow foundation technology has and engineered an impact tested, proved invaluable within city centres, shallow mounted version. The impact outside airports, skyscrapers and other tested variant is also available in a applications where underground shallow mount lift-out model. services, car parks and basements FINISHES

prevent standard depth equipment being Only ATG Access has the manufacturing installed. Manganese steel, painted to the rights to the impact tested City of London traditional City of London Bollard manganese steel bollard. The product is design – red, black and white. The traditional, impact tested heritage finished and painted with the distinctive bollard can be installed within a black, red and white design. foundation depth of just 150 mm.

CITY OF LONDON BOLLARD STATISTICS

Shallow Foundation 240 mm x 240 mm (base) Bollard Diameter Design tapers to a 150 mm (top) Height Above Ground 1,390 mm Foundation Depth 150 mm Painted Manganese Steel – Red, Black & Finishes Available White Security Rating PAS 68: V/7,500(N3)80/90:19.2/25.0

Removable Bollards

SP180 Shallow, Removable Engineered PAS 68: 3,500 kg @ 48 kph A resistance of 314 KJ + Excalibur (125) Removable Engineered for PAS 68: 7,500 kg at 32 kph SP400 Removable Engineered for PAS 68: 7,500 kg at 48 kph SP400 Shallow Removable PAS 68: V/7500(N2)/48/90:0/3.5 SP1000 Removable Engineered for PAS 68: 7,500 kg at 80 kph SP1000 Shallow Removable Engineered for PAS 68: 7,500 kg at 64 kph Centurion Shallow Removable Engineered for IWA 14: 7,200 kg @ 80 kph SPK12R Removable IWA 14: V/7200(N2A)/80/90:0.7 Westminster Shallow Removable Engineered for PAS 68: 7,500 kg @ 64 kph City of London Shallow Removable Engineered for PAS 68: 7,500 kg @ 80 kph

SP180 SHALLOW MOUNT BOLLARD Operation Type: Shallow Foundation, Removable Bollard

PRODUCT OVERVIEW Disruption is minimised when excavating and the time needed on site ATG Access is proud to launch a new to install such security measures is SECURITY RATING family of bollards, the SP180 range. This reduced considerably. Often the cost of Shallow Foundation, Removable range is designed to arrest a 3,500 kg redirecting underground services is the Bollard: vehicle travelling at 48 kph: a resistance main installation cost associated with Engineered to an impact of 314 KJ+. traditional depth static bollards in resistance of 314 KJ+

addition to large areas of excavation. Minimum tested array – 3 units. Not only is this range designed to withstand substantial impact, but it also Shallow foundation bollards save major offers a comprehensive range of options disruption and thousands in unexpected and operation methods including fixed, costs. lift-out, and automatic variants. FINISHES Supplied with all component parts All component parts galvanised as The shallow foundation, removable variant of galvanised as standard for corrosion standard for corrosion protection. the SP180 bollard requires a depth of just 350 protection. Can be fitted with a Grade Can be fitted with a Grade 304 mm for the foundation and socket. This 304 stainless-steel sleeve (186 mm stainless-steel sleeve (186 mm reduces civil installation costs dramatically diameter) or painted to a specific RAL diameter) or painted to a specific and enables the product to be installed and colour. RAL colour. secure in no time at all.

SP180 SHALLOW, REMOVABLE BOLLARD

Shallow Removable Bollard Bollard Diameter 180 mm / 186 mm (sleeved) Height Above Ground 700 mm Foundation Depth 350 mm All component parts galvanised as standard for corrosion protection. Can be fitted with a Finishes Available Grade 304 stainless-steel sleeve (186 mm diameter) or painted to a specific RAL colour.

Security Rating Impact resistance of 314 KJ+

EXCALIBUR SECURITY BOLLARD Shallow Foundation, Removable Security Bollard Operation Type:

PRODUCT OVERVIEW Lift-Out Variant The fixed Excalibur (125 mm diameter) The Excalibur 125 mm, manganese steel bollard is available in either a fixed has been successfully tested to withstand or removable variant. a 7,500 kg vehicle travelling at 20 mph, SECURITY RATING achieving no impact penetration. The Engineered for PAS 68: removable model is an engineered Manganese steel is a unique material 7,500 kg at 32 kph (20 mph) solution based on this tested model. The which has extreme anti-wear properties, Minimum tested array – 3 units. product only requires 400 mm of depth to is very resistant to abrasion and has install so is classed as a shallow high impact strength. foundation product.

All of these characteristics make the material ideal to be used within high The minimal installation depth makes this security bollard manufacture and product ideal to protect urban, design. The Excalibur bollard can be pedestrianized areas from vehicular attack FINISHES where there may be a dense network of supplied in its raw state to be painted on A manganese steel core fitted with a services preventing a deep rooted bollard site or fitted with an aesthetic sleeve. stainless steel as standard. Other from being installed. A removable The bollards slim profile makes this sleeves can be supplied on consultation operation allows occasional access to product versatile to be able to fit into with our technical team. vehicles if required. any schemes aesthetics.

125 MM EXCALIBUR BOLLARD STATISTICS Shallow Foundation, Removable Bollard Diameter 125 mm Height Above Ground 900 mm Foundation Depth 400 mm

A manganese steel core fitted with a stainless steel as Finishes Available standard. Other sleeves can be supplied on consultation with our technical team.

Engineered for PAS 68: 7,500 kg at 32 kph (20 mph) Security Rating

PRODUCT OVERVIEW The SP400 suspended slab, The ATG Access SP400 Shallow Foundation removable bollard has been Bollard range includes the industry’s first successfully impacted and certified SECURITY RATING impact tested, lift-out product installed within a suspended slab. directly and impacted within a suspended IWA14-1: Successfully arrested a slab foundation. The test slab had a thickness of 250 2,500 kg vehicle travelling at 48 kph. mm and the product was impacted This bespoke solution provides clients with with a 2,500 kg vehicle travelling at Calculations Available information on energy transfer which can be 48 kph. used to certify that the product is suitable to be installed above major sub structures such After impact, the integrity of the suspended slab was completely as underground tube tunnels, ticket halls, major utility services and underground car retained and the removable bollard FINISHES performed a dead-stop with zero Available in a variety of finishes: parks. meters of penetration. galvanised as standard with two yellow The SP400 bollard has a slim profile making reflective bands, painted to any this product aesthetically pleasing and able The impact test calculations can be specified RAL colour or fitted with a to be fitted with a multitude of sleeve used to design a security solution for stainless steel sleeve. options. your suspended slab application.

SP400 REMOVABLE BOLLARD – SUSPENDED SLAB APPLICATION Removable, Suspended Slab Bollard

Bollard Diameter 198 mm (painted) / 219 mm (sleeved)

Height Above Ground 900-1,000 mm (depending on the surface finish)

Foundation Depth 250 mm deep slab

Galvanised. Painted to a specified RAL colour or fitted Finishes Available with a stainless-steel sleeve.

Security Rating Calculations Available

PRODUCT OVERVIEW This enables effective perimeter The ATG Access SP400 Bollard range protection to be installed within urban includes a shallow foundation static and environments which typically have a dense network of underground SECURITY RATING removable variant as well as a fully automatic product and a manually services which cost a fortune to Removable Bollard, High Security redirect or move. Bollard: retractable variant. Engineered Solution for 7,500 kg The SP400 bollard has a slim profile The lift-out function provides the option at 48 kph (30 mph) making this product aesthetically pleasing for clients to remove the installed Minimum tested array – 1 unit. and able to be fitted with a multitude of product to allow occasional access sleeve options. The product has been when required. This product can be tested and engineered to withstand impact removed when needed using lifting from a 7,500 kg vehicle travelling at 48 kph equipment. (30 mph). This makes the SP400 range of FINISHES bollards suitable for most security If the 523 mm depth does not comply Sheradised black finish as applications and schemes. with your foundation profile, ATG standard with two, yellow reflective Access have tested another bands. Product can be supplied in REMOVABLE BOLLARD removable SP400 bollard which sits an alternative RAL finish if The lift-out, high security SP400 bollard can within a shallow foundation array and specified. An aesthetic sleeve can be installed within a foundation depth of just has a shallower foundation profile. also be fitted (219mm diameter) 523 mm.

SP400 REMOVABLE BOLLARD

Removable Bollard

Bollard Diameter 209 mm core diameter, 240 mm top lid diameter.

Height Above Ground 995 mm

Foundation Depth 523 mm – socket depth Sheradised black finish as standard with two, yellow reflective bands. Product can be supplied in an alternative Finishes Available RAL finish if specified. An aesthetic sleeve can also be fitted (219mm diameter)

Security Rating Engineered Solution for 7,500 kg at 48 kph (30 mph).

PRODUCT OVERVIEW This product is an industry first as it is the only removable high security The ATG Access SP400 Shallow Foundation bollard to be officially crash tested and Bollard range includes a shallow foundation SECURITY RATING carries an official BSI: PAS 68 static and removable variant. The range also certification. includes the industry’s first impact tested lift-out Shallow Foundation, Removable product installed directly and impacted within a Bollard: The lift-out function provides the option suspended slab foundation. PAS 68: V/7,500(N2)48/90:0/3.5 for clients to remove the installed Minimum tested array – 3 units. product to allow occasional access The SP400 bollard has a slim profile making when required. This product can be this product aesthetically pleasing and able to removed when needed using lifting be fitted with a multitude of sleeve options. equipment.

LIFT-OUT, SHALLOW BOLLARD Minimal time and disruption is needed FINISHES The lift-out, shallow foundation, high security to deploy shallow foundation products Galvanised as standard. Can be SP400 bollard can be installed within a this all ensures the installation of the powder coated to a specified RAL foundation depth of just 350 mm. This enables product is straight forward, causing finish or fitted with an aesthetic effective perimeter protection to be installed minimal disruption to site and street sleeve (219mm) which can feature within urban environments which typically have scenes. bands if required. a dense network of underground services which cost a fortune to redirect or move.

SP400 SHALLOW REMOVABLE BOLLARD

Removable Bollard

Bollard Diameter 198 mm (219 mm sleeved)

Height Above Ground 975 mm Foundation Depth 350 mm

Galvanised as standard. Can be powder coated to a Finishes Available specified RAL finish or fitted with an aesthetic sleeve (219mm) which can feature bands if required.

PAS 68: V/7,500(N2)48/90:0/3.5 Security Rating Minimum array of three bollards.

PRODUCT OVERVIEW To remove the bollard from the installed

The SP1000 high security bollard is ideal socket, lifting equipment is required. Full for providing perimeter protection for sites operating instructions are available on at risk of a high velocity attack. The product request. SECURITY RATING is available in a variety of different The SP1000 removable bollard can be SP1000 Removable Bollard: variations including automatic, static, supplied in a variety of alternative finishes Engineered Solution: 7,500 kg at shallow mounted and removable. 80 kph (50 mph) such as painted to a specified RAL colour, in Minimum tested array – 1 unit. REMOVABLE stainless steel or galvanised. Optional banding styles can also be provided to fit in A removable variation of the ATG Access with the security design and requirements of SP1000 bollard is available, providing the the site. option for clients to remove the installed product to allow occasional access to the The SP1000 removeable bollard FINISHES secured area when required. Galvanised as standard. Can be compliments the SP1000 automatic bollard This product has a foundation depth of just or the SP1000 static bollard to provide a powder coated to a specified RAL 400 mm plus surface finishing. This makes complete suite of security bollards to finish or fitted with an aesthetic the product perfect for urban areas or sites mitigate against high velocity, vehicular sleeve (350mm) which can feature with sub-structures below ground. attacks. bands if required.

SP10 00 REMOVABLE BOLLARD

Removable Bollard Bollard Diameter 300 mm | 350 mm with an aesthetic sleeve Height Above Ground 998 mm

Foundation Depth 400 mm (plus surface finish)

Galvanised as standard. Can be powder coated to a specified RAL finish or fitted with an Finishes Available aesthetic sleeve (350mm) which can feature bands if required.

Security Rating Engineered Solution: 7,500 kg at 80 kph (50 mph)

PRODUCT OVERVIEW The lift-out function provides the The ATG Access SP1000 Shallow Foundation option for clients to remove the Bollard range includes a shallow foundation installed product to allow occasional SECURITY RATING static and removable variant. access when required. This product Shallow Foundation, Removable can be removed when needed using Bollard: The SP1000 bollard has been tested and lifting equipment. It has been Engineered for PAS 68: 7,500kg engineered to withstand high velocity vehicular designed to compliment the shallow at 64 kph (40 mph) attacks. The product can accommodate a foundation, static bollard allowing a Minimum tested array – 3 units. range of aesthetic finishes and decorative holistic set of security products for sleeves allowing the security product to blend perimeter protection. into any street scene environment.

Minimal time and disruption is LIFT-OUT, SHALLOW BOLLARD needed to deploy shallow foundation FINISHES The lift-out, shallow foundation, high security products this all ensures the Galvanised as standard. Can be SP1000 bollard can be installed within a installation of the product is straight powder coated to a specified RAL foundation depth of just 392 mm. This enables forward, causing minimal disruption finish or fitted with an aesthetic effective perimeter protection to be installed to site and street scenes. sleeve (323mm) which can feature within urban environments which typically have bands if required. a dense network of underground services which cost a fortune to redirect or move.

SP1000 SHALLOW REMOVABLE BOLLARD

Removable Bollard Bollard Diameter 300 mm (323 mm sleeved)

Height Above Ground 1,000 mm Foundation Depth 112mm Shallow Foundation Plate: 280 mm Socket

Galvanised as standard. Can be powder coated to a Finishes Available specified RAL finish or fitted with an aesthetic sleeve (323mm) which can feature bands if required.

Security Rating Engineered for PAS 68: 7,500 kg at 64 kph (40 mph)

PRODUCT OVERVIEW base plates are laser cut with The Centurion Shallow Foundation, directional arrows and part numbers Removable Bollard is a derivative of the which can be cross referenced to site SECURITY RATING

layout drawings. This all ensures the impact tested static product which was tested installation of the product is straight and certified to the IWA 14 standard. The Engineered for IWA 14: Centurion withstood a 7,200 kg vehicle forward, causing minimal disruption to 7200kg @ 80kph travelling at 50 mph (80kph) achieving less site and street scenes. Minimum tested array – 3 units. than 2 meters of penetration. The removable variant has been engineered to withstand the An incredibly strong product which is same impact. supplie d with all component parts galvanised as standard. The core is Designed to be installed within a foundation sleeved as standard with a stainless depth of just 170 mm and with a socket depth steel, rectangular sleeve FINISHES of just 259 mm, this enables effective Component parts supplied galvanised (324x176mm). perimeter protection to be installed within as standard. The core is sleeved as urban environments which typically have a Bespoke sleeves can be designed and standard with a stainless steel, dense network of underground services which supplied after consultation with our rectangular sleeve (324x176mm). cost a fortune to redirect or move. technical team. Bespoke sleeves can be designed and supplied after consultation with our Minimal time and disruption is needed to technical team. deploy shallow foundation products as the

CENTURION SHALLOW FOUNDATION. REMOVABLE BOLLARD

Shallow Removable Bollard Bollard Diameter 150mm (front face) x 300mm (profile)

Height Above Ground 1,100 mm Foundation Depth 170 mm Foundation Plate; 259 mm Socket

Security Rating Engineered for IWA 14: 7200kg @ 80kph

SPK12R HIGH SECURITY BOLLARD Fixed & Removable High Security Bollard Operation Types:

PRODUCT OVERVIEW SPK12R - REMOVABLE The SPK12R Bollard offers a cost- Installing a removable bollard allows effective solution where the highest occasional access to a site when SECURITY RATING security performance is required. required. Tested in accordance with the International Workshop Agreement The SPK12R (removable) bollard Achieving less than a meter of 2014. consists of a steel tube filled with penetration under impact, this concrete and placed within a foundation product is suitable for critical Removable: V/7200(N2A)/80/90:0.7 socket. To remove the bollard, lifting national infrastructure protection Minimum tested array – 5 units equipment can be used to lift the inner, where stand-off distances available impact tested bollard from the ground between a building perimeter and socket. the building itself are minimal. Impact tested in accordance with IWA Available as a fixed or removable 14, this SPK12 variation successfully FINISHES high security bollard providing arrested a 7,200 kg vehicle traveling at Concrete filled bollard finished in either clients with a complete perimeter 80 kph (50 mph). a galvanised or a painted finish. Can be security solution for protection painted to any specified RAL colour. against high velocity vehicular This product is suitable for HCIS projects attacks.

. SPK12R BOLLARD STATISTICS

Removable Bollard Diameter 273 mm Height Above Ground 1,000 mm Foundation Depth 1,200 mm

Concrete filled bollard finished in either a galvanised or a painted finish. Can be painted to any Finishes Available specified RAL colour.

Security Rating IWA 14: V/7,200(N2A)/80/90:0.7

PRODUCT OVERVIEW SHALLOW REMOVABLE The Westminster high security bollard is Shallow foundation technology has manufactured from micro-engineered proved invaluable within city centres, SECURITY RATING steel which has a high impact outside airports, skyscrapers and ‘toughness’ and the ability to absorb other applications where underground Removable, Shallow Mount massive amounts of energy without services, car parks and sub-structures Engineered solution: fracturing. PAS 68 7,500 kg at 64 kph (40 mph) prevent standard depth equipment Minimum tested array – 3 units This heritage style bollard is available in being installed. a lift-out, shallow foundation or traditional depth fixed model. Only ATG This variant allows for very occasional Access have the manufacturing rights to access to areas within a busy city the impact tested, Westminster steel centre. bollard. FINISHES

Manganese steel, supplied raw With a ribbed profile and peaked top, The foundation structure of the lift-out (unpainted) as standard with a blank within the front facia there is a product consists of a 575 mm shallow front facia. Can be primed and fitted with specifically designed section to enable a foundation lift-out socket. The a corporate logo or crest. corporate logo or crest to be inserted. connecting shallow foundation pate is Supplied unpainted or with a primed just 150 mm in depth. finish.

WESTMINSTER BOLLARD STATISTICS

Removable Bollard 260 mm (front face) Bollard Diameter 125 mm (side profile) Height Above Ground 1,065 mm Foundation Depth 575 mm

Black Manganese Steel unpainted. Can be primed on Finishes Available request and fitted with a logo or crest.

Security Rating PAS 68: Engineered Solution – 7,500 kg at 64 kph (40 mph)

PRODUCT OVERVIEW development and sits at the cutting edge of The City of London Bollard has the integral industry technology. The foundation can be good looks and heritage appearance of installed at a fraction of the depth the traditional City of London bollard which underground that traditional, impact tested SECURITY RATING can be found all over London’s square products require. mile. Shallow Foundation Removable: Shallow foundation technology has proved PAS 68: Engineered Solution – ATG have taken the traditional design and invaluable within city centres, outside 7,500 kg at 80 kph (50 mph) engineered an impact tested version. The airports, skyscrapers and other applications Minimum tested array – 3 units impact tested variant is available in a lift- where underground services, car parks and out, shallow foundation or traditional depth basements prevent standard depth fixed model. equipment being installed.

Only ATG Access has the manufacturing A removable, shallow foundation variant rights to the impact tested City of London allows occasional access to areas within a manganese steel bollard. The product is FINISHES busy city centre. finished and painted with the distinctive Cast manganese steel, painted with The foundation structure of the lift-out black, red and white design. the trademark City of London design product consists of the 150 mm shallow colours - red, white, and black. SHALLOW REMOVABLE foundation structure and then a further

The ATG Access shallow foundation depth of 450 mm to accommodate the lift- system is a revolutionary engineering out socket.

CITY OF LONDON BOLLARD STATISTICS

Removable Bollard 240 mm x 240 mm (base), tapering down to 150 mm Bollard Diameter (top) Height Above Ground 1,390 mm

150 mm plate with an additional socket depth of 450 Foundation Depth mm

Cast manganese steel, painted with the trademark Finishes Available City of London design colours - red, white, and black.

PAS 68: Engineered Solution – 7,500 at 80 kph (50 Security Rating mph)

Road Blockers & Vehicle Barriers

ATG PF 10000 Road Blocker PAS 68: V/7,500(N3)/80/90 Sentinel Road Blocker US DOS K12: 6,800 kg @ 50 mph Cedar Vertical Lift Barrier PAS 68: V/7500(N2)/48/90:0.3/0.0 Patriot Beam Barrier US DOS K12: 6,800 kg @ 50 mph Cityscape Gate PAS 68: V/7500(N2)/64/90:1.09/2.40 Bri-Swing Gate IWA 14: V/7200(N2)/80/90:0.7 ASTM: M50 P1 Bri-Swing Gate IWA 14: V/7200(N2A)/64/90:7.9

ATG PF10000 K12 ROAD BLOCKER Automatic – Hydraulically Operated Operation Type:

PRODUCT OVERVIEW Powered using a hydraulic system, this The ATG PF10000 Road Blocker offers the operating system is modular in design so you can specify the duty cycle and ultimate in high security protection for SECURITY RATING entrance ways. The products robust operating characteristics you require. construction and high level of corrosion Road blockers are typically used to secure BSI PAS 68 Rated: protection delivers reliable performance for applications which have wide entrance V/7,500(N3)/80/90 years. ways, where aesthetics are not the

The ATG PF10000 Road Blocker is certified number one priority or where multiple to the BSI PAS 68 impact test standard, forms of access control need to be used. arresting a 7,500kg vehicle travelling at This solution can be supplied in widths 80kph (50 mph). The blocker can be between 2,000-4,000 mm with an overall FINISHES deployed in emergency fast operation mode raised height of 1,050 mm. The depth Fully galvanised bottom frame. Top (EFO) in under 2 seconds. In normal required for installation is just 400 mm. section powder coated, and the top

plate finished with an anti-skid paint. operation, the road blocker raises and Road blockers are very effective when The blocker skirt is constructed from lowers in 4 to 6 seconds. used as a final denial barrier. They can aluminium and is easily removed in also be used to create a sally-port security As with all ATG Access products the the event of an impact. design allowing for security guards to PF10000 blocker can be integrated with our sophisticated control systems offering manually search a vehicle entering a very almost infinite flexibility of control. high security site.

The Sentinel is powered by a high qualityATG PF10000 ROAD BLOCKER STATISTICS Road Blocker Widths 2,000-4,000 mm Height Above Ground 1,050 mm Foundation Depth Blocker Depth – 360 mm, excavation required for installation – 400 mm

Fully galvanised bottom frame. Top section powder coated, and the top plate finished with an anti- Finishes Available skid paint. The blocker skirt is constructed from aluminium and is easily removed in the event of an impact.

Security Rating BSI PAS 68: V/7,500(N3)/80/90 Hydraulically operated and can be integrated into any existing or new ATG Access control system. Control Systems Normal operating speed – between 5-6 seconds. EFO function available to operate under 2 seconds.

PRODUCT OVERVIEW hydraulic system which is modular in The ATG Access Sentinel Road Blocker design so you can specify the duty cycle offers the ultimate in high security and operating characteristics you require. SECURITY RATING protection for entrance ways. The products Road blockers are typically used to secure robust construction and high level of applications which have wide entrance DOS: corrosion protection delivers reliable ways, where aesthetics are not the US DOS K12: 6,800 kg @ 50 mph performance for years. number one priority or where multiple (80 kph)

The Sentinel is certified to DOS K12 and forms of access control need to be used. HCIS Compliant. can be deployed in emergency fast Road blockers are very effective when operation mode (EFO) in under 2 seconds. used as a final denial barrier. They can In normal operation, the Sentinel road also be used to create a sally-port security blocker raises and lowers in 4 to 6 design allowing for security guards to FINISHES seconds. manually search a vehicle entering a very All components are galvanised as

As with all ATG Access products the high security site. standard and then painted yellow and black with an option to fit red Sentinel may be integrated with our To increase visibility of the barrier, the LED lights if required. sophisticated control systems offering Sentinel Road Blocker can be supplied almost infinite flexibility of control. with LED lights on the front plate.

Available in widths between 8ft-14ft. The Sentinel is powered by a sophisticated

SENITNEL ROAD BLOCKER STATISTICS

Road Blocker Widths 8-14 ft (2.5 m – 4.2 m) Height Above Ground 38 inches (965 mm) when fully deployed Foundation Depth 18 inches (457 mm)

All components are galvanised as standard and then Finishes Available painted yellow and black with an option to fit red LED lights if required.

Security Rating US Department of State (DOS): K12 L3 Hydraulically operated and can be integrated into any Control Systems existing or new ATG control system with an optional EFO function.

PRODUCT OVERVIEW Tested and certified to the British PAS The High Security, Cedar Barrier is an 68 standard, this product successfully extremely cost effective, manual, vertical withstood impact from a 7,500 kg SECURITY RATING barrier. vehicle travelling at 48 kph (30 mph) achieving less than a meter of Meets the BSI PAS 68 rating, the tested The barrier has been designed to be easy to penetration. width of this barrier was 4.5 meters: install and can secure an access point where traffic flow is low or where an With no power requirements needed, PAS 68: V/7500(N2)/48/90:0.3/0.0 entrance or exit road is remote and doesn’t this product can be used to secure have access to power to drive an automated access lanes in remote locations. The barrier. lack of power infrastructure also The gate is counterweighted for ease of makes installation cost effective and operation and comes with a manual locking straight forward. mechanism to secure the barrier in the FINISHES lowered, closed position to prevent the All components galvanised as Galvanised as standard and then painted yellow. Alternative RAL barrier from opening when unattended. standard for corrosion protection and colours are available on request. The tested barrier width was 4,500 mm. For then painted yellow. The barrier can different width requirements, please consult be coated in alternative RAL colours our technical team. on request.

CEDAR BARRIER STATISTICS

Manually Operated, Vertical Barrier Barrier Widths 4,500 mm

Height Above Ground 900 mm – bar height Foundation Depth 500 mm

Galvanised as standard and then painted yellow. Finishes Available Alternative RAL colours are available on request.

Security Rating PAS 68: V/7,500(N2)/48/90:0.3/0.0

PRODUCT OVERVIEW Supplied in either a stainless steel or powder coated finish to any RAL colour The Cityscape Gate is an impact tested specified. This product can span swing gate. This strong frangible gate entrance widths of between 4 m to 8 m. SECURITY RATING requires just 300 mm of foundation depth Meets the BSI PAS 68 rating, tested This product can be specified as a right for installation. variant was 4.5 m wide: or left-hand hinged gate and can be Ideal for protecting entrances from 4 to 8 opened in either direction depending PAS 68: meters wide, the gate is manually opened on site requirements. V/7,500(N2)/64/90:1.09/2.40 and closed and may be secured in the closed position by an automated or manual This aesthetically pleasing high locking mechanism. The gate may be security product is ideal for access secured from a remote location points with minimal operations each electronically if required. Able to be opened hour and is a cost-effective way of from both inwards and outwards, this preventing access to unauthorised FINISHES provides flexible, secured access for vehicles and pedestrians. Supplied in either a stainless steel or vehicles. A catch post can also be supplied powder coated finish to any RAL to lock the arm in the open position. colour specified. Can be left or right- The gate can also be used within a A 4.5 m version of this innovate structure is tiger-trap security design if required so handed. impact tested and successfully arrested a that vehicles can be searched before 7,500 kg truck travelling at 64 kph (40 mph). entry for ultra-secure sites.

The Cityscape Gate is at the forefront of technology employingCITYSCAPE energy absorb GATEing STATISTICS synthetic fibres to arrest an attacking vehicle. Manually Operated

4,000 mm – 8,000 mm. End posts have a diameter of Widths Available 355 mm. Tested configuration – 4.5 m wide.

Height Above Ground 920 mm – bar height

Foundation Depth From 300 mm

Supplied in either a stainless steel or powder coated Finishes Available finish to any RAL colour specified. Can be left or right- handed. PAS 68: V/7,500(N2)64/90:1.09/2.40 Security Rating Tested configuration – 4.5 m wide.

Manually Operated, Swing Arm Gate Operation Type:

PRODUCT OVERVIEW

Brought to you by ATG Access, the Bri-Swing The product can be utilised as a Gate is one of the highest performing emergency standalone security measure or SECURITY RATING access gates on the market. can be integrated alongside Tested to IWA 14, this product was designed to alternative, existing or new fence BSI IWA 14: V/7,200[N2A]/64/90:7.9 restrict access to a local football stadium on lines. match-days. When locked in a closed position the Crash tested in both directions. manually operated Swing Gate will inhibit Tested the international impact test vehicular access from a nearby ring-road, standard - BSI IWA 14, the product ultimately stopping them from reaching fans and can withstand impact from a 7,200 pedestrians near the stadium. kg vehicle travelling at 64 kph. FINISHES With a maximum 8 m clear span, large vehicles The product has a secure locking can still pass through so day-to-day operations Steelwork, hot dip galvanised to BS EN mechanism and can be installed left aren't disrupted. The shallow footing means ISO 1461. or right-handed; a two-gate underground services aren't disturbed making this Thicker coatings and powder coatings a cost-effective yet reliable HVM solution for the arrangement is also possible to are available on client request. Right or public realm, suitably applied around stadiums, span across wide carriageways. left-handed. arenas and city centre events.

BRI-SWING GATE

Manual Swing Gate Height of Posts (mm) 1,018 mm Gate Width (mm) Gate Opening Span – up to 8,000 mm clear span Operation Manual Swing Operation with Secure Locking Mechanism

Security Rating IWA 14: V/7,200[N2A]/64/90:7.9

Steelwork all hot dip galvanised as standard to BS EN ISO 1461. Alternative finishes are available with Finishes thicker coatings or in a RAL, powder coated finish

BRISTORM BRI-RISE GATE

Manually Operated, Rising Arm Gate Operation Type:

PRODUCT OVERVIEW Further innovation has followed the Complete your P1 perimeter with the Bri-RISE initial development of this gate; the Emergency Access Gate. SECURITY RATING Bri -RISE gate can now, also be Brought to you by ATG Access, the Bri-RISE integrated alongside alternative, Gate is one of the highest performing existing or new fence lines. ASTM F2656-15: M50 P1 emergency access gates on the market. BSI IWA 14: V/7,200[N2B]/80/90:0.7

As well as this, the rising arm can Designed to integrate with the Bristorm ZERO be fixed in position allowing the arm Fence, the Bri-RISE gate will complete any ASTM F2656-15 M50 P1 perimeter line. to bridge a gap where underground services may be present. This The manual lifting arm can be easily opened reduces cost and eliminates the and closed by a single operative, reducing the FINISHES need to disrupt on site operations. risk of mechanical or electrical failure. The

self-balancing arm also reduces risk of injury Steelwork, hot dip galvanised to BS EN Tested to both international impact to individuals operating the gate. A catch ISO 1461. post can also be supplied to lock the gate test standards – BSI IWA 14 and Thicker coatings and powder coatings are available on client request. arm into the ‘open’ position when not in ASTM F2656-15.

use.

BRI-RISE GATE

Manual Swing Gate Height 1,525 mm – Post Height; 871 mm – Height to the underside of the Beam Arm Gate Width (mm) Widths from: 3,618 mm to 5718 mm Arm Weight (kg) 10 kg Lifting Weight ASTM F2656-15: M50 P1 Security Rating IWA 14: V/7,200[N2]/80/90:0.7

Steelwork all hot dip galvanised as standard to BS EN ISO 1461. Alternative finishes are available with Finishes thicker coatings or in a RAL, powder coated finish

PATRIOT BEAM BARRIER Hydraulically or Manually Operated Beam Barrier Operation Type:

PRODUCT OVERVIEW The barrier powder coated in a black finish as standard. For any other finish The ATG Access Patriot Beam Barrier is one of requirements, please consult with our the strongest vehicle barriers in the market. Fully SECURITY RATING technical team. impact test certified to ASTM standards 12ft (3,658 mm): DOS – K12 L2 achieving a M50 P1 designation. This product The Patriot barrier is easy to install and 24ft (7,315 mm): ASTM – M50 P1 remained intact following vehicular impact. maintain. The trench depth required to 20ft (6,096 mm) Manually accommodate the beam is just 305 mm. Operating widths range from 12ft to 24ft. For Operable Barrier: Engineered to The stanchions on either side of the widths in-between, please enquire. The product ASTM - M50 P1. beam require 1,524 mm of depth to can be operated hydraulically or manually, install. removing the requirement for power.

Able to operate reliably in extreme hot The hydraulic barrier’s drive motor is rated at and cold climates as all mechanical 100% continuous duty cycle and operating fixings are above ground and easy to speeds vary from 3-5 seconds for raise and FINISHES service. All parts are hot-dip galvanised lower. This can be reduced further to just one as standard for corrosion second deployment time by adding an This product can be used to establish a protection and then coated to any emergency fast operation function to the system. tiger-trap system enabling security RAL colour specified. A manual operation is also possible for remote checks, or as a continuation of a sites with no access to an electric supply, or for protected perimeter fence or gate. sites which only require occasional access.

PATRIOT BEAM BARRIER STATISTICS

Hydraulically Operated – 12 ft Hydraulically Operated – 24 ft Manually Operated – 20 ft

Barrier Widths 12 ft (3,658 mm) 24 ft (7,315 mm) 20 ft (6,096 mm)

Height Above Ground 914 mm – beam height when deployed

Foundation Depth 305 mm (depth of beam trench), 1,524mm (stanchions)

Finishes Available Powder coated in black as standard. For any other finish requirement, please consult with our technical team.

US DOS SD-STD-02.01: K12 L2 Security Rating ASTM: M50 P1 Engineered for ASTM: M50 P1 (equivalent to ASTM M50 P1)

Wire Rope Fencing Systems

Bristorm LP 30 PAS 68: V/2,500/48/90:1.64/2.86 Bristorm LP 40 PAS 68: V/2,500/64/90:3.2/4.5 Bristorm IVP PAS 68: V/2,500/64/90:2.4/0.0 Bristorm 30 PAS 68: V/7,500/48/90:2.0/0.0 Bristorm 40-45 PAS 68: V/7,500/64/90:2.0/0.0 Bristorm 40-100 PAS 68: V/7,500/64/90:4.0/0.0 Bristorm 50 PAS 68: V/7,500/80/90:2.0/12.0 Bristorm Zero ASTM: M50 P1 & M50 P2 Bristorm Beam Barrier PAS 68: V/7,500/48/90:0.3/0.0 StronGuard Beam Barrier IWA 14: V/7,200[N2B]/80/90:1.5 ASTM F2656/F2656M: 18a M50/P2

ANTI VEHICLE FENCES

Operation Type: Tensioned, wire-rope system – five wires

PRODUCT OVERVIEW

Brought to you by ATG Access, the Bristorm Industrial sites requiring security for lower to medium velocity attacks or accidental Anti-Vehicle Fence system comprises of a tensioned, five-wire rope system supported impact. SECURITY RATING (PAS 68) by line posts and terminated at anchor Available in three different variations, this posts. fencing system is supplied galvanised to BS Bristorm LP 30: V/2,500/48/90:1.64/2.86 EN ISO 1461 as standard. The five wire rope The length of each fence is infinite as long strands are zinc plated and HDPE coated as Bristorm LP 40: V/2,500/64/90:3.2/4.5 as the maximum distance between anchors per EN 10264-2:2002 or EN 10244-2. Bristorm IVP: V/2,500/64/90:2.4/0.0 is maintained in accordance with the manufacturer’s installation manual. Thicker coatings are available and the option to specify a powder coated finish is also The anti-vehicle fence is comprised of a possible on client request. tensioned five wire rope system in a weave configuration supported by “Z” cross This system consists of the following: FINISHES Steelwork, hot-dip galvanised to BS EN sectioned line posts and terminated at post • Ground Anchor • ISO 1461; strands zinc plated and HDPE & ground anchors. Line Posts • Fence Posts (if required) coated as per EN 10264-2:2002 or EN The anti-vehicle fence was tested to BSI • Wire Rope Strands 10255-2. Thicker coatings and powder PAS 68 and achieved 1.64-3.2 m coatings are available on client request. penetration making this system ideal for

ANTI-VEHICLE FENCES

Bristorm LP 30 Bristorm LP 40 Bristorm IVP Height 1,230 mm 1,230 mm 2,400 mm Foundation Dimensions Anchors: 3,000 x 1,500 x 1,250 Anchors: 3,000 x 1,500 x 1,250 Anchors: 3,300 x 1,500 x 1,000 (mm) Line Posts: Ø500 x 950 Line Posts: Ø500 x 950 Line Posts: Ø500 x 950 Anchorage (m) Minimum: 42 m | Maximum 100 m Minimum: 68 m | Maximum 100 m Minimum: 40 m | Maximum 100 m Line Post Spacing 4,000 mm 4,000 mm 2,440 mm Angled Anchor Range N/A N/A 90° to 270° Tension Yes, as per manual Yes, as per manual Yes, as per manual BSI PAS 68 Rating V/2,500/48/90:1.64/2.86 V/2,500/64/90:3.2/4.5 V/2,500/64/90:2.4/0.0 Ropes 5 Weaved Strands 5 Weaved Strands 5 Weaved Strands

ANTI VEHICLE FENCES

Operation Type: Tensioned, wire-rope system

PRODUCT OVERVIEW a nchor posts, line posts, wire rope and mechanical fittings. Brought to you by ATG Access, the Bristorm SECURITY RATING (PAS 68)

Anti-Vehicle fence range consists of a The anti-vehicle fence steelwork is number of tensioned wire-rope systems with supplied hot-dip galvanised to BS EN Bristorm 30: V/7,500/48/90:2.0/0.0 either seven or ten ropes supported by line ISO 1461 as standard and the wire rope Bristorm 40-45 m: V/7,500/64/90:2.0/0.0 posts and terminated at anchor posts. The strands are zinc plated and HDPE coated Bristorm 40-100 m: V/7,500/64/90:4.0/0.0 length of each fence is infinite as long as the as per EN 10264-2:2002 or EN 10244-2. Bristorm 50: V/7,500/80/90:2.0/12 maximum distance between anchors is

maintained in accordance with the Thicker coatings and powder coating to manufacturer’s installation manual. suit specific aesthetic requirements can be accommodated on request. FINISHES The anti-vehicle fence system was crash Steelwork, hot-dip galvanised to BS EN tested to BSI PAS 68 and achieved between A detailed installation methodology can ISO 1461; strands zinc plated and HDPE 2-4 m penetration (see below table). be found in the manufacturer’s coated as per EN 10264-2:2002 or EN installation manual and associated The Bristorm anti-vehicle fence system ‘General Arrangement Drawings’. 10255-2. Thicker coatings and powder comprises of the following components; coatings are available on client request.

ANTI-VEHICLE FENCES

Bristorm 30 Bristorm 40-45 m Bristorm 40-100 m Bristorm 50 Height 1,230 mm 1,255 mm 1,255 mm 1,255 mm Anchors: 2,000 x 2,000 Anchors: 2,000 x 2,000 x Anchors: 2,000 x 2,000 x Anchors: 2,000 x 2,000 x Foundation x 1,500 2,500 2,500 2,500 Dimensions (mm) Line Posts: Ø500 x Line Posts: Ø600 x 1,500 Line Posts: Ø600 x 1,500 Line Posts: Ø600 x 1,500 950 Minimum: 42 m | Minimum: 45 m | Minimum: 100 m | Minimum: 100 m | Maximum Anchorage (m) Maximum 100 m Maximum 45 m Maximum 100 m 100 m Line Post Spacing 3,200 mm 2,400 mm 2,400 mm 2,400 mm Angled Anchor Range 45° to 150° 45° to 145° 45° to 145° 45° to 145° Tension Yes, as per manual Yes, as per manual Yes, as per manual Yes, as per manual

BSI PAS 68 Rating V/7,500/48/90:2.0/0.0 V/7,500/64/90:2.0/0.0 V/7,500/64/90:4.0/0.0 V/7,500/80/90:2.0/12.0

Ropes 7 Weaved Strands 7 Weaved Strands 7 Weaved Strands 10 Weaved Strands

BRISTORM ZERO FENCES

Non-Tensioned, Wire Rope System Operation Type:

PRODUCT OVERVIEW All anchors with the exception of the Brought to you by ATG Access, the Bristorm Zero wrap anchors are considered fence system compromises of a non-tensioned, terminating anchors. All Anchors Posts SECURITY RATING eight wire-rope system supported by rectangular, are installed into a 2,000 x 2,000 x hollow section line posts and terminated at anchor 2,500 mm mass pour posts or intermediate restraint posts. The length of Concrete foundation. Concrete must be Bristorm Zero: M50 P1 each fence is infinite as long as the maximum a minimum C35 SR mix design or site- Bristorm Zero P1: M50 P1 distance between anchors is maintained in specific equivalent. A single layer of Bristorm Zero P2: M50 P2 accordance with the manufacturer’s installation reinforcement mesh A393 shall be set manual. 100 mm below the finished concrete surface. Detailed installation All anchors are 2,450 mm long x Ø 406 mm methodology can be found in the diameter with an integrated Ø 960 mm diameter manufacturer’s installation manual and FINISHES welded plate positioned at 1,200 mm. The height associated drawings. Steelwork, hot-dip galvanised to BS EN of the Anchors posts shall be 1,200 mm from the ISO 1461; strands zinc plated and finished ground level. All anchors are hot dip The anti-vehicle fence system is crash HDPE coated as per EN 10264-2:2002. galvanized to BS EN ISO 1461 after fabrication. tested to ASTM F2656-15, successfully Thicker coatings and powder coatings Additional coatings can be applied to achieve achieving the following performance are available on client request. specific project coating thickness or aesthetic. ratings: M50: P1 & M50: P2.

BRISTORM ZERO FENCES

Bristorm Zero Bristorm Zero P1 Bristorm Zero P2 Height 1,200 mm 1,200 mm 1,200 mm Anchors: 2,000 x 2,000 x 2,500 Anchors: 2,000 x 2,000 x 2,500 Anchors: 2,000 x 2,000 x 2,500 Foundation Dimensions IRP’s N/A IRP’s: Ø1,000 x 2,000 IRP’s: N/A (mm) Line Posts: Ø600 x 1,500 Line Posts: Ø600 x 1,500 Line Posts: Ø600 x 1,500 Anchorage (m) Minimum: 50 m | Maximum 50 m Minimum: 50 m | Maximum 250 m Minimum: 65 m | Maximum 200 m Line Post Spacing (mm) 2,500 mm 2,500 mm 2,500 mm Angled Anchor Range 0° to 355 0° to 355 0° to 355 Inter Restraint Post N/A 50 m (maximum) N/A Spacing

Tension None, ‘sag’ removed only None, ‘sag’ removed only None, ‘sag’ removed only

ASTM F2656 Rating M50: P1 M50: P1 M50: P2

BRISTORM BEAM

Operation Type: Tensioned, wire-rope system – two wires

PRODUCT OVERVIEW Brought to you by ATG Access, the Bristorm • Anchor post Beam Fence comprises of a tensioned 2 wire- • Ground Anchor rope system, supported by line posts • Line Post • SECURITY RATING (PAS 68) terminated at anchor posts and protected by a ‘W’ Beam • Wire rope double height “W” Beam arrangement. • Mechanical Fittings V/7500 [N2]/48/90:0.3/0.0

The length of each fence is infinite as long as The anti-vehicle fence is tested to BSI the maximum distance between anchors is PAS 68 and achieved a performance of: maintained in accordance with the manufacturer’s installation manual. V/7500 [N2]/48/90:0.3/0.0

This product is hot-dip galvanised to BS The anti-vehicle fence is comprised of a FINISHES tensioned two wire rope system in a weave EN ISO 1461 as standard. The wire rope strands are zinc plated and HDPE Steelwork, hot-dip galvanised to BS EN configuration supported by “I” cross sectioned ISO 1461; strands zinc plated and HDPE line posts, terminated at shallow anchor & coated as per EN 10264-2:2002 or EN 10255-2. coated as per EN 10264-2:2002 or EN ground posts and protected with a double 10255-2. Thicker coatings and powder height “W” Beam arrangement. coatings are available on client request. Thicker finishing and powder coatings The Beam Fence consists of the following are available on client request. components:

BRISTORM BEAM FENCE

Bristorm Beam Fence Height 1,233 mm Foundation Dimensions Anchors: 2,800 x 1,400 x 500 (mm) Line Posts: Surface Mounted Anchorage (m) Minimum: 25 m | Maximum 25 m Line Post Spacing 2,000 mm Angled Anchor Range 40° - 270° Tension Yes, as per manual BSI PAS 68 Rating V/7,500/48/90:0.3/0.0 Ropes 2 Weaved Strands

BRISTORM StronGuard™ Beam

Operation Type: Impact Tested Beam & Fence System

PRODUCT OVERVIEW StronGuard™ Beam is recommended Brought to you by ATG Access, the Bristorm for use on petrochemical installations, StronGuard™ Beam is the latest development military sites, hazardous waste storage sites, test laboratories and data centres SECURITY RATING in impact tested perimeter security. It where space is at a premium, but combines an impact tested Bristorm Beam maximum security is required. IWA 14 Rating: with a Barkers Fencing, StronGuard™ V/7,200[N2B]/80/90:1.5 palisade fence or a SecureGuard SL2 mesh Depending on your security ASTM F2656/F2656M: system. requirement, the StronGuard™ Beam is 18a M50/P2 compatible with a wide range of attack

This unique combination successfully arrested tested fence systems including mesh, palisade, and ASTM certified fence. a 7,200 kg vehicle travelling at 80 kph (50mph) when subjected to an IWA 14 impact test. The The system can be integrated with barbed wire, razor wire, electrified fence system also provides physical protection against forced entry to LPCB, CPNI or ASTM and PID’s systems. FINISHES Steelwork, hot-dip galvanised to BS EN certification. The combination of an impact tested ISO 1461; strands zinc plated and HDPE beam and a forced entry, attack tested Designed to meet operational requirements by fence, provides the highest level of coated as per EN 10264-2:2002 or EN offering one combined fence line, which in turn protection in one system for clients 10255-2. Thicker coatings and powder offers a smaller footprint when you have needing to secure Critical National coatings are available on client request restrictions with available space within your Infrastructure sites. (Powder coatings to BS1722 Part 16). asset.

BRISTORM StronGuard™ BEAM FENCE

Height 1,233 mm (Height of Beam); 2.4 m or 3 m (Height of Fence) Bristorm Beam: Anchors: 2,800 x 1,400 x 500 | Line Posts: Surface Mounted Foundation Dimensions (mm) Fence: Bolted to the ground utilising the beam for support. Anchorage (m) Minimum: 25 m | Maximum 25 m (Beam) | 2.75 m (palisade fencing) & 2.44 m (mesh fencing) Security Rating IWA 14: V/7,200[N2B]/80/90:1.5 | ASTM F2656/F2656M: 18a M50/P2 Steelwork, hot dip galvanised to BS EN ISO 1461; strands zinc plated and HDPE coated as per EN

Finish 10264-2:2002 or EN 10255-2. Thicker coatings and powder coatings are available on client request (Powder coatings to BS1722 Part 16).

Temporary Security Barriers

Surface Guard Barrier System IWA 14: V/2,500(N1G)/48/90:4.5 IWA 14: V/7,200(N3C)/32/90:4.8 Surface Mounted Bollards PAS 68: V/7500(N2)/48/90:0.0/0.0 PAS 68: V/7500(N2)/48/90:2/0

THE SURFACE GUARD SYSTEM Surface Mounted, Temporary Security Operation Type:

IWA 14: V/2,500(N1G)/48/90:4.5 | IWA 14: V/7,200(N3C)/32/90:4.8

PRODUCT OVERVIEW SURFACE GUARD SYSTEM ATG Access has developed the Surface Guard system Unit Footprint 1,425 mm (front to back) x 1,185 mm for the purposes of temporary event protection. (width) Guard Height Above Supplied in individual, lightweight modules and able to 700 mm be stacked making transportation and storage very Ground 450 mm as standard. Alternative lengths easy. The system is compact, robust and easy to Ramp Length install. Installation can be achieved across one available. standard road width with kerbs in just 40 minutes with Galvanised frame and ramp plates with an anti-slip in-fill panel and anti-slip covering. four men. No fork lift truck assistance is required. Finishes Available Guard supplied in a light grey polyurethane cover which can be vinyl wrapped to any The system is modular; completely surface mounted design or with advertising copy. V/2,500(N1G)/48/90:4.5 IWA 14: and incorporates a number of innovative features Security Rating IWA 14: V/7,200(N3C)/32/90:4.8 which allows its deployment from lightweight vehicles A vehicle access point can be added to a in a very short period of time. Many different site standard, Surface Guard array to allow scenarios can be accommodated within a Surface Optional Extras emergency service vehicles through the Guard deployment. system.

This innovative system can cope with road cambers and changes in levels as a result of kerbs or central reservations. The system has been designed to be aesthetically pleasing and to avoid an ‘unfriendly’ or menacing feel.

The Surface Guard units allow pedestrian, wheelchair, buggy and cyclist access. An emergency vehicle access point can be added to fit within a standard array.

6-10 units can be stacked flat on one normal sized pallet for easy transportation and storage. This also reduces the number of delivery vehicles required to secure a road width in comparison to more traditional barriers such as concrete or steel blocks. All units can be man handled removing the need for forklift truck assistance.

SURFACE GUARD SYSTEM Manually Operated, Temporary Security Vehicle Access Point:

IWA 14: V/2,500(N1G)/48/90:4.5 | IWA 14: V/7,200(N3C)/32/90:4.8

PRODUCT OVERVIEW SURFACE GUARD: VEHICLE ACCESS POINT The ATG Access Surface Guard system has been designed for the purpose of temporary event security [Per Individual Unit] and to protect crowded places from vehicle ramming 1,425 mm (front to back) x 1,185 mm attacks. Unit Footprint (width) Supplied in individual units, each product is lightweight Guard Height 700 mm and able to be deployed and removed very quickly and Above Ground easily with no surface fixings. One road width can be 450 mm as standard. Alternative secured in just 40 minutes. Ramp Length lengths available. This innovative system can cope with road cambers Supplied with a light grey and changes in levels because of kerbs or central Finishes Available polyurethane cover. This can be vinyl reservations. The system has been designed to be wrapped by the client if required. aesthetically pleasing and to avoid an ‘unfriendly’ or menacing feel. IWA 14: V/2,500(N1G)/48/90:4.5 Security Rating IWA 14: V/7,200(N3C)/32/90:4.8 The standard Surface Guard units allow pedestrian and cyclist access only. To allow emergency service The Surface Guard system is lightweight and easy to transport. 6-10 vehicles through the system, a vehicle access point can units can be stacked flat on one normal sized pallet for easy be supplied to fit within a standard array. transportation and storage. This also reduces the number of delivery

The vehicle access point has reinforced steel plates so vehicles required to secure a road width in comparison to more that the system can cope with high axel loadings traditional barriers such as concrete blocks or steel blocks. All units required to let a fire engine or HGV through in an can be man handled removing the need for forklift truck assistance. emergency. The surface plates are high visibility yellow so that vehicles can easily spot the access route.

The system is manned, and authorised personnel are able to manually lower the protective barrier to allow emergency access in less than 30 seconds.

SURFACE MOUNTED BOLLARDS Surface Mounted, Fixed Operation Type:

SITES INSTALLED • Arndale Centre, Manchester • London Olympics 2012

PRODUCT OVERVIEW Six bollards can be deployed in just over ten minutes and in this instance, using The Rapid Deployable, Surface Mount planters to pin the array at each end. Bollard system is one of the world’s first SECURITY RATING impact tested surface mounted bollard The temporary security solution can be PAS 68: systems, providing PAS 68 certified impact used to protect an internal or external Bolted at each end of the array - protection. perimeter. The bollard system can be V/7500(N2)/48/90:0.0/0.0 installed on a more permanent basis if required if site security requirements Anchored at each end of the array - Installation and removal of the product is V/7500[N2]/48/90:2/0 straightforward and rapid. The array of change. bollards can be utilised when heightened This product will not only stop vehicle security measures are needed as a borne, explosive attacks; it will also provide temporary security measure. an intelligent solution for temporary security against attacks where vehicles are The system can either be bolted at each used as the weapon. FINISHES end of the array or anchored using ballast. Powder coated in black as This could be a planter a temporary fence The surface mounted bollard configuration standard. For any alternative system, a highway barrier, or a product has been tested as a stand-alone system finishes required, please consult and in conjunction with the Hesco Bastian from the National Barrier Asset stock. with our technical team. and Highway Care fence technology.

SURFACE MOUNTED BOLLARD SYSTEM

Surface Mounted Bollard System Bollard Diameter 203 mm Height Above Ground 1,026 mm (including surface plate) Foundation Depth Surface Mounted – 0 mm

Powder coated in black as standard. For any Finishes Available alternative finishes required, please consult with our technical team.

Bolted PAS 68: V/7,500(N2)48/90:0.0/0.0 Surface Mounted Bollards Installed Security Rating Anchored PAS 68: V/7,500[N2]48/90:2/0 Inside a Shopping Centre