High Security Handbook Automatic Bollards SP180 Automatic Bollard Engineered for 314kJ VP HD Automatic Bollard PAS 68: V/1500(M1)/32/90:0/0 Defender Automatic Bollard DOS: K4 SP400 Automatic Bollard PAS 68: V/7500(N2)/48/90:0/0 PAS 68: V/7500(N2)/64/90:2.3/2.7 SPTT Automatic Bollard PAS 68: V/7500(N2)64/90:0.5/6.1 Stealth Automatic Bollard IWA 14: V/7200(N2A)/80/90:0.8 Titan MK II Automatic Bollard PAS 68: V/7500/80/90:4.0/33.5 SP1000 Automatic Bollard PAS 68: V/7500(N2)80/90:0/10 ASTM: M50 P1 SP1200 Automatic Bollard PAS 68: 30,000(N3)/80/90:3.30/25 SP180 AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated **Reflective bands are not available with this product. PRODUCT OVERVIEW The bollard itself has a slim diameter measuring just 180 mm and is ATG Access is proud to launch a new SECURITY RATING family of bollards, the SP180 range. supplied in a black sherardized finish as standard. Engineered to withstand a This range is designed to arrest a 3,500 3,500 kg vehicle travelling at 48 kg vehicle travelling at 48 kph: a Fully compliant with BS EN ISO kph. A resistance of 314 KJ + resistance of 314 KJ+. 13849:201 5, safety of machinery – CE Mark; this bollard can be paired with Minimum array – 1 unit. any form of access control operation Not only is this range designed to withstand substantial impact, but it also required. ATG Access design and offers a comprehensive range of build all control systems in-house and FINISHES these can be designed to a client’s options and operation methods. The Supplied in a sherardized automatic variant can be integrated into specification. black finish as standard with a any access control system and the Driven by hydraulic power supplied via stainless-steel lid. The product fixed variant compliments providing an external HPU. High security can also be fitted with an LED permanent, perimeter protection. cabinets are also available if required. lighting lid if required. No machine banding or As with all ATG Access products, Comes with the option of a stainless- serviceability is the foremost steel lid fitted with direct LED (RGBW) reflective tape is supplied with consideration when designing a new lights to increase visibility of the the SP180 product. product range & the SP180 range is no product when being used in the public exception. realm. SP180 AUTOMATIC BOLLARD Automatic Bollard Diameter 180 mm Height Above 700 mm FGoundationround Depth 1,100 mm Supplied in a black sherardized finish as standard with a stainless-steel lid. Can be fitted with a Finishes Available lighting lid if required. No machine banding or reflective tape can be supplied with this product. Security Rating Impact Resistance of 314 KJ+ Safety Fully compliant with BS EN ISO 13849:2015, safety of machinery – CE Mark CoBaCo House | North Florida | Haydock Industrial Estate | Haydock | Merseyside | WA11 9TP Tel: +44 (0)1942407745 | Email: [email protected] | Website: www.atgaccess.com VP HEAVY DUTY AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated PRODUCT OVERVIEW The VP HD bollard itself has a diameter of just 186 mm and a height of 700 mm above ground. The ATG Access VP HD bollard has been SECURITY RATING successful impact tested in accordance with the The product is supplied as standard with a black, polyurethane, or stainless-steel aesthetic PAS 68 certification to arrest a 1,500 kg vehicle Meets the BSI PAS 68 rating sleeve, a stainless-steel lid and two machine at 32 kph. when installed to PAS 69 bands. certification. The VP Heavy Duty bollard can be retrofitted into VP HD SOFTWARE V/1,500(M1)/32/90:0.0 any existing VP Traffic system to upgrade an Depending on a client’s project specification, Minimum tested array – 1 unit area with a higher level of security protection. access control options include: a vehicle tag system, number plate recognition, CCTV, VP HD HARDWARE keypad authorisation or a timing clock. If an The VP HD can be used alongside a red and existi ng access control system is already in green traffic indicator column to instruct users place, ATG bollards can be integrated with this. FINISHES when it is safe to pass through the system. Supplied with either a black PU Loops are installed within the ground surface on This automatic bollard system is ideal for sleeve with two yellow reflective both the vehicle approach and vehicle exit. controlling vehicle access to key infrastructure bands or a stainless-steel sleeve Loops will detect when a vehicle has safely sites with heavy pedestrian flow such as high with two black bands as moved through the system and will instruct the streets or urban areas and where the identified standard. bollards to rise when it is safe to do so. threat is from smaller vehicles moving at lower speeds. Driven using an external HPU motor. VP HD AUTOMATIC BOL LARD Automatic a Bollard Diameter 186 mm Height Above Ground 700 mm Foundation Depth 1,108 mm (including soakaway) Supplied with either a black PU sleeve with two yellow reflective Finishes Available bands or a stainless-steel sleeve with two black bands as standard. Security Rating PAS 68: V/1,500(M1)/32/90:0.0 Fully compliant with BS EN ISO 13849:2015, safety of Safety machinery – CE Mark CoBaCo House | North Florida | Haydock Industrial Estate | Haydock | Merseyside | WA11 9TP Tel: +44 (0)1942407745 | Email: [email protected] | Website: www.atgaccess.com DEFENDER AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated PRODUCT OVERVIEW The ATG Access Defender, K4 impact tested Other product finishes are available on bollard can cope with a high number of application such the fitting of aesthetic SECURITY RATING operations per hour and is ideal for sites with s leeves and red LED lights in the top lid. high traffic flow. American Department of State: K4, L2. Minimum array of 3 bollards. The control board provided as standard The Defender is an economical and effective is a PLC control system which can be way of protecting your vehicle access points setup to meet whatever operational and has been installed at high security sites requirements you may have. The all over the world. product can also be fitted with an FINISHES K4 impact test certified after successfully emergency fast operation function so Finished with high visibility yellow arresting a 6,800 kg vehicle travelling at 30 that the bollard/s can be deployed in just paint as standard. Alternatively, the mph (48 kph). This product offers low (2 seconds). product can be supplied in a operating and maintenance costs. galvanised finish or fitted with an The system works using hydraulic aesthetic sleeve. All steel parts are galvanised as standard for operation with an external HPU housed Red LED lights can also be corrosion protection. The product is then within a cabinet. High security cabinets requested in the top lid. finished in high visibility yellow paint as are available on request. standard DEFENDER AUOTMATIC BOLLARD Automatic Bollard Diameter 10.75” (273 mm) / Sleeved 11” (279 mm) Height Above Ground 31” (762 mm) Foundation Depth 49” (1235 mm) Galvanised & then painted yellow as Finishes Available standard. Can be fitted with an aesthetic sleeve or with red LED lights in the top lid. DOS: K4, L2 – Minimum, 3 Bollard Tested Security Rating Array. Fully compliant with BS EN ISO 13849:2015, Safety safety of machinery CoBaCo House | North Florida | Haydock Industrial Estate | Haydock | Merseyside | WA11 9TP Tel: +44 (0)1942407745 | Email: [email protected] | Website: www.atgaccess.com SP400 AUTOMATIC BOLLARD Operation Type: Automatic – Hydraulically Operated PRODUCT OVERVIEW Able to cope with a high number of operations per hour, this product is ideal for The ATG Access SP400 is available in a sites with high traffic flow. The bollards can SECURITY RATING multitude of finishes and operation types be part of a large, secure access control making this product one of ATG Access’s most scheme or operated as a standalone BSI PAS 68: 2010 versatile high security bollards. V/7,500(N2)48/90:0/0 system. 48 kph - 64 kph - V/7,500(N2)64/90:2.3/2.7 This product has been successfully tested to Minimum tested array – 1 unit the British PAS 68 impact test standard. The control board provided as standard is a PLC control system which ATG Access can Supplied in a black, sherardized finish as design to meet whatever operational standard (with or without bands) with a requirements you may have (all systems stainless-steel lid; this bollard can also be fitted FINISHES designed in house). An emergency fast with a decorative sleeve and lights if required. Available in a variety of finishes: operation function is also available if black sherardized as standard with The automatic SP400 high security bollard is required which raises the system in under 2 a stainless-steel lid, with or without hydraulically operated using an external HPU. seconds. two yellow reflective bands (client preference). Can be fitted with an The bollard has been successfully tested twice The product has been designed and aesthetic sleeve and supplied with with a 7,500 kg vehicle travelling at both 64 kph manufactured with serviceability in mind and LED lights if required. and then 48 kph. as a result offers fantastic reliability. SP400 AUTOMATIC BOLLARD Automatic Standard: 209 mm with a 240 mm top lid Bollard Diameter Sleeved: 219 mm with a 240 mm top lid Height Above Ground 998 mm Foundation Depth 1,528 mm Sherardized, black finish as standard with or without two yellow reflective bands (client preference).