DOCSLIB.ORG

UAG Instructions.Final

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
UAG Instructions.Final Universal Angle Guide More Woodworking Universal Angle Guide and Height Gauge and Height Gauge Products from BEVEL ANGLES DEFINED: Master Your Machinery Set or measure ANY ANGLE from 0° to 180° to 1/2° accuracy! Designed like a MasterGage ”fan” with the degree markings fanning out from course 5° lines - to fine 1/2° lines. All bevel angles on the Universal Angle Guide are identified by a framed angle, as an example 15° . The ZERO angle position BENEFITS of a bevel angle actually begins at 90°. This is best illustrated by the front view of a table saw as shown below. With the saw • No math or calculations required • Eliminate gaps and misalignment in all your angle cuts blade in its normal 90° position to the table top along MasterPlate and SuperBar – Align, • Read any angle with your sliding “T” bevel, fast and accurately with the “T” bevel set calibrate and troubleshoot your tablesaw. SLIDING "T" BEVEL • Designed for both right hand and left hand “T” bevel readings in a vertical standing SAW BLADE Eliminate binding, burn marks, kick position at 90°. • Set any angle, including bevel/miter angles, to 1/2° accuracy 90ß back and minimize sanding. Any blade tilt is measured from • Set an angle and get the complementary angle automatically the 90° (zero) position, therefore, • Measure both inside AND outside corners a 15° degree saw blade tilt is MasterGage/Classic – Awarded • Ideal for setting/measuring angle cuts for crown molding, etc • Transfer angles from your work to any machine measured as a 15° bevel angle. “Top Tool” in 2003 by Wood Magazine. • Set/measure required angles on tablesaws, bandsaws, etc ▲ FRONT VIEW Align, calibrate, trouble shoot all your • Handy Angle Chart gives required angles for multiple sided boxes OF A TABLE SAW woodworking machinery with machine • Set measure saw blade/router bit heights to 1/32 inches or shop precision. Expand the capabilities 1 millimeter accuracy with the Height Gauges of your Classic with many custom MITER ANGLES DEFINED: • OPTIONAL Height Gauge Block makes height measurements a snap designed Accessories. • Portability – at home – to the shop – to the building site All miter angles on the Universal Angle Guide are identified by • Great for chair makers, furniture makers, cabinetmakers, finish a framed angle, as an example 15° . The ZERO angle position carpenters or anyone who works with angle making requirements of a miter angle actually begins at 90°. This is best illustrated MasterGage/Professional – The Sold Exclusively by MasterGage.com by the top view of a table saw as shown below. With the miter Professional has all the capabilities of the FEATURES gauge in its normal 90° position Classic, PLUS a precision protractor, • Precision scales generated by computer to the saw blade, the “T” bevel is SAW BLADE PLUS the revolutionary “Instant Recall” • Permanently laser etched lines into 3/16” thick hardened aluminum lying flat in its horizontal features for both the protractor and position at 90°. SLIDING "T" BEVEL • Brushed, anti-glare black anodized surface for easy reading height gauge. Custom Accessories are also • Any miter angle is measured 90ß Angles marked from left to right, 0° to 180° - to 1/2° accuracy available for the MasterGage/Professional. from the 90° (zero) position, • Angles marked from right to left, 180° to 0° - to 1/2° accuracy Reduce machine set up time and boost therefore, a 15° degree miter • Both left and right hand, 90° to 0° bevel/miter angle scales productivity with the powerful features of gauge angle is MITER GAUGE • Inch height gauge, 3.0 inches, graduated to 1/32” measured as a 15° miter angle. the MasterGage/Professional. • Metric height gauge to 8 centimeters, graduated to 1 millimeter ▲ TOP VIEW • Metric scale has convenient multiple 32mm index markings All the above products are Patented OF A TABLE SAW Sold Exclusively by MasterGage.com • in the United States of America. Height Gauge Block (optional) for blade & bit measurements • Convenient nail mounting hole for storage Get control of all your woodworking machinery ® with the powerful features of the MasterGage System ® MasterGage.com Toll Free: 1/888/893-8300 AMERICANMADE MasterGage.com Call for FREE Catalog Toll Free: 1/888/893-8300 BLADE 3ß 105ß ANGLE ® ANGLE CHART MasterGage.com ' Copyright 2003 NUMBER MITER UNIVERSAL ANGLE GUIDE OF SIDES ANGLE AMERICAN MADE AND HEIGHT GAUGE 4 45ß ADJUSTABLE 3/32" THICK ANTI-GLARE 5 36ß HEIGHT BLOCK MULTI SIDED BOX ALUMINUM BLACK ANODIZE Angle reading with the Sliding Bevel Gauge body positioned to the LEFT side. 6 30ß ($19.00 OPTION) MITER ANGLE CHART 8 22.5ß PLATING 9 20ß METRIC 10 18ß INCHES 8 Align the Sliding Bevel blade on the center arrow point labeled “ALIGN HERE” as illustrated. 12 15ß ® 3 ANGLE CHART MasterGage.com 1/2 DEGREE 15 12ß ' Copyright 2003 NUMBER MITER 18 10ß 90ß 100ß UNIVERSAL ANGLE GUIDE 3/4 80ß OF SIDES ANGLE AMERICAN MADE MARKINGS 20 9ß 7 AND HEIGHT GAUGE 110ß 4 45ß • Reading a BEVEL/MITER angle. In the illustration, read the framed 15˚ 85ß 95ß 105ß 5 36ß 1/2 75ß 120ß 32MM 6 30ß 115ß 100ß 9 6 1 ß 8 22.5ß 65ß 5 05ß 5 1/4 ß 9 20ß METRIC 8 1 ß 80ß ß 125ß 3 0 1 75ß 10 18ß 0 0 BEVEL/MITER, then ADD the 3˚ indicated at the top of the blade for a sum total of 18˚. 5 1 ß INCHES 7 ß 8 55ß 1 5 5 12 15ß 2 ß 6 ß 3 NAIL HANG 2 0 0 15 12ß ß 6 135ß 1 5 ß 18 10ß 90ß 100ß 130ß 4 3/4 80ß 7 HOLE 0 45ß 55ß 0 20 9ß ß 11 3/4 4 ß 70 0ß 10ß 50ß 85ß 95ß 135ß 0ß BEVEL/MITER ANGLE ß 10 32MM ß 75 5ß 12 10ß 145ß 1 0ß 0ß 45ß 4 60 ß 1 140ß 2 95ß 150ß 65 100ß 5 6 32MM MARKINGS • Reading a STANDARD angle. With the Sliding Bevel Gauge body positioned on the 1/2 22.5ß 30ß 10 ß 35ß 5 110ß ß 85ß 130ß 30ß 40ß 5ß 1 80ß 5ß 125ß ß ß 5 1 145ß 5 7 30ß 5 50ß 1 ß ß 70ß 55ß 120ß 5 1 ß ß 65 1/4 5 40ß 35ß 32MM 125ß 2 155ß 60ß 5 1 135ß 140ß 5 35ß ß 3 130ß 0ß 0 45ß 55ß LEFT SIDE, read from the scale that starts at 0˚ on the LOWER LEFT side. In the 50ß 35ß 3 160ß 40ß 25ß 1 50ß ß 50ß 135ß 0 0ß BEVEL/MITER ANGLE METRIC SCALE 1 0 5 2 ß 1 ß 1 5 0 ß 5 145ß ß 45ß 0 45ß 2 ß 4 140ß 2 1/2 22.5ß 3 1 20ß ß 0 ß 60ß 0 5 TO 1 MM 35ß ß 5ß 0 3 40ß 55ß 1 0 1 60ß 165ß ß 5ß 6 ß 3 145ß 5 0 0 5 ß ß 55ß 2 40ß 2 ß 3/4 2 1 ß 5 35ß 32MM 1/4 ß 5 40ß 2 1 150ß 3 1 illustration, read the blade setting at 05˚, then ADD the 3˚ 15ß ß 65ß 5 5 3 0ß 170ß 5 165ß 5ß 50ß ß 3 30ß 5 1 7 ß 65ß 0ß 15 2 50ß 6 70ß 7 ß 1 45ß ß 5 ß 0 1/2 1 0 5ß 45ß 5 2 ß 10ß 2 6 170ß 0ß 5 0ß 10ß 175ß 160ß 5 5ß 6 1 75 ß 1 ß ß 5 2 ß 75 3/4 20ß 6 5 60ß 80ß 80ß 5 1 1/4 HERE 65ß 170ß 165 ß ß CENTIMETER indicated at the top of the blade for the sum total of 108˚. 5ß 1 ß ß 5 75ß ß 70 65ß 70 1 65ß 5 1/2 ß ß 10ß 85ß 85 170ß 10ß 1 90ß 90ß 75ß 5ß 1 MARKINGS 0ß 180ß 0ß 180ß 7 7 ß 8 ß 0ß 80 1/4 ALIGN HERE 5 5 175ß 115ß 5ß ß 85ß 85ß 50ß 0ß 180ß 90ß 90ß 0ß 180ß 55ß 120ß ▲ ENLARGED DETAIL 1 2 5 1 ß 45ß 3 15ß BEVEL/MITER ANGLE 40ß 0 READS LEFT 0ß TO RIGHT 180ß READS RIGHT 0ß TO LEFT 180ß ß 135ß BEVEL/MITER ANGLES 1 4 30 ALL LINES ARE COMPUTER GENERATED 35ß 0ß BODY BLADE ALIGNMENT POINT 30ß 1 BEVEL BLADE ALIGNMENT POINT 4 4 5 0 AND LASER ETCHED FOR PRECISION ß ß HEIGHT GAUGE IN INCHES 150ß 50 25ß ß 105ßANGLE3ß BLADE TO 1/32 INCH ß 155 4 5 Angle reading with the Sliding Bevel Gauge positioned to the RIGHT side. INTRODUCTION TO THE UNIVERSAL ANGLE GUIDE ® ANGLE CHART MasterGage.com Align the Sliding Bevel blade on the center arrow point labeled “ALIGN HERE” as illustrated. Designed to be used with a Sliding Bevel Gauge ' Copyright 2003 NUMBER MITER UNIVERSAL ANGLE GUIDE OF SIDES ANGLE AMERICAN MADE AND HEIGHT GAUGE 4 45ß • Reading a BEVEL/MITER angle. In the illustration, read the framed 15˚ The Angle Guide is very “user friendly”– designed for both right and left 5 36ß 6 30ß 8 22.5ß 9 20ß METRIC BEVEL/MITER, then ADD the 3˚ indicated at the top of the blade for a sum total of 18˚. handed craftsmen. Setting/reading angles and heights is a snap - let’s take a look. 10 18ß INCHES 8 12 15ß 3 15 12ß Start at the center arrow labeled “ALIGN HERE” and “fan” out to the Bevel and 18 10ß 90ß 100ß 3/4 80ß 20 9ß 7 • Reading a STANDARD angle.
Load more

Recommended publications
  • Great American Furniture
    Great american FURNITUREFROM THE EDITORS OF MAGAZINE JULY 2003 SHAKER Classic Candlestand ▼ 6 The Shakers referred to the leg design as “spider feet.” Surprisingly, this traditional form is not that complicated. Press Cupboard ▼ 12 This fine case piece showcases both your collection and craftsmanship. Oohs and ahhs guaranteed. Hand-tool Stepstool ▼ 19 Become a Neanderthal, if only for one project. This attractive yet highly useful stool offers step-by-step hand-tool instruction. 18TH CENTURY 62 Simple Candle Boxes ▼ 24 6 Beginning woodworkers will love this fast, classic project. Butler Tray Table ▼ 28 A Chippendale table, complete with a removable tray top, is just what you need for serving tea and coffee to guests. 12 ▼ Pennsylvania Spice Box 36 An instant heirloom: This beautiful 18th century spice box doubles as the perfect jewelry box for you or your loved one. ARTS & CRAFTS Greene & Greene Side Table ▼ 43 Grace the end of your sofa or chairs with class and style. 28 ▼ Slant-arm Morris Chair 48 Build an Arts & Crafts icon that instantly will become the most sought-after chair in your home. CONTEMPORARY 48 Nicolai Fechin-style Bench ▼ 58 Always wanted to try carving? Here’s your chance. The detail is meant to look rustic and simple so mistakes won’t matter. Plywood Nesting Tables ▼ 66 Sleek and versatile (one table or three), this project is a great lesson in making perfect miter joints. 66 Rice-paper Maple Lamp ▼ 70 Build a simple lamp based on designs typical in a Japanese household that will look great in any modern home.
    [Show full text]
  • Stagecraft 1 -Tools Flashcards | Quizlet
    Stagecraft 1 -Tools 123 terms by kj22333 Like this study set? Create a free account to save it. Create a free account Claw hammer framing hammer Tack hammer Ball peen hammer staplegun Self retracting hand tape measure Framing square Try Square Combination Square Speed square Spirit Level Bevel Gauge or Sliding T-Bevel Chalk Line Plumb Bob Trammel Points Hand Saw Back Saw Coping Saw Keyhole Saw Hack Saw Wood Plane Draw knife Wood Rasp File Tin Snips Diagonal Cutters Bolt Cutters Wood Chisel Cold Chisel Utility knife (Mat knife, x-acto knife) Box End Wrench Open Ended Adjustable Wrench (Crescent or C-wrench) Pipe Wrench c-clamp Parallel Jaw Clamp Jorgenson clamp Bar Clamp Crow Bar claw foot Slotted Screw Driver Phillips Screw Driver Portable Circular Saw Power Miter Saw Cordless Drill Jig Saw Router Band Saw Table Saw Straightedge t-square caliper compass miter guide tape measure saw protractor contour gauge scribe cross cut saw wider kerf crosscut saw teeth rip tooth blade/saw dovetail saw carpenters hatchet wire strippers paint scrapper electrical cable cutters sureform rat tail rasp can cut a hole/ shape a hole Racketing brace hand drill auger bit twist bit not very good at removing sawdust pilot bit countersink bit spade bit carbide bit good for concrete and plaster hole saw allen wrench set Yankee screwdriver screws as you push downward hammer staple gun nail set mallet nut driver pipe clamp vice wood vice spring clamp band clamp welding clamp vise grip lineman's pliers channel lock pliers/ slip joint lock pliers crimping tool needle nose pliers slip joint pliers nail puller socket wrench open end wrench pry bar tack remover grommet set rivet gun whetstone hot glue gun tubecutter die holder anvil pipe cutter center punch die tap conduit bender regulator pallet staple gun Nail gun Air ratchet/ grinder radial arm saw steel band saw drill press scew shooter angle grinder palm sander belt/disk sander random orbital sander best sander.
    [Show full text]
  • Tools and Their Uses NAVEDTRA 14256
    NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. NAVAL EDUCATION AND TRAINING PROGRAM MANAGEMENT SUPPORT ACTIVITY PENSACOLA, FLORIDA 32559-5000 ERRATA NO. 1 May 1993 Specific Instructions and Errata for Nonresident Training Course TOOLS AND THEIR USES 1. TO OBTAIN CREDIT FOR DELETED QUESTIONS, SHOW THIS ERRATA TO YOUR LOCAL-COURSE ADMINISTRATOR (ESO/SCORER). THE LOCAL COURSE ADMINISTRATOR (ESO/SCORER) IS DIRECTED TO CORRECT THE ANSWER KEY FOR THIS COURSE BY INDICATING THE QUESTIONS DELETED. 2. No attempt has been made to issue corrections for errors in typing, punctuation, etc., which will not affect your ability to answer the question. 3. Assignment Booklet Delete the following questions and write "Deleted" across all four of the boxes for that question: Question Question 2-7 5-43 2-54 5-46 PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.
    [Show full text]
  • Build a Sawhorse
    Youth Explore Trades Skills Carpenter Build a Sawhorse Description Carpenters need to be able to accurately interpret drawings in order to extract information. Measuring correctly, cutting accurately, and using fasteners appropriately are necessary skills that every carpenter must develop. In this Activity Plan, students will have the opportunity to develop these skills by constructing sawhorses in small groups. Sawhorses are indispensable on a construction site and can prove to be constantly useful around the home. Their versatility is shown by their ability to function as workbenches, stepladders, vises, scaffolding, storage racks, seating, and platform and table supports. Lesson Outcomes The student will be able to: • Extract information from a drawing • Proficiently perform basic measuring and layout • Cut materials in an accurate and safe manner using appropriate tools • Join materials together using appropriate fasteners • Build a sawhorse that can be used in other activities within the course Assumptions The student will: • Have an understanding of measurement systems used in carpentry and the use of tape measures, squares, and basic layout techniques. • Have had an introduction to the safe use of basic hand tools and portable power tools, including portable circular saws, mitre saws, and hammers. • Be aware of common fastening devices, including common and finishing nails, wood screws, and wood glue. Terminology Gusset (cleat): a strip of wood used to strengthen or support the surface to which it is attached. Sawhorse: a beam with four legs used to support a board or plank for sawing. Commonly used to support lumber, or as a work surface. Sliding T bevel: an adjustable gauge for setting and transferring angles.
    [Show full text]
  • Thomas, John C. Exploring Careers in Construction: a Guide
    DOCOMBIT RESUME ED 098 414 95 CE 002 519 AUTHOR Thomas, John C. TITLE Exploring Careers in Construction: A Guide for Teachers. INSTITUTION Kentucky Univ., Lexington. Vocational Education Curriculum Development Center. SPONS AGENCY Bureau of Occupational and Adult Education (DREW /OE), Washington, D.C.; Kentucky State Dept. of Education, Frankfort. Bureau of Vocational Education. PUB DATE Jul 74 GRANT OEG-0-72-4683 NOTE 257p.; For other guides in the series,see CE 002 518-527, and CE 002 530 AVAILABLE FROM Curriculum Development Center, Room 151, Taylor Education Building, University of Kentucky, Lexington, Kentucky 40506 (Single copies only, $6.00) EDRS PRICE MF-$0.75 HC-S12.60 PLUS POSTAGE DESCRIPTORS Audiovisual Aids; Behavioral Objectives; Building Trades; *Career Education; *Construction Industry; *Curriculum Guides; Curriculum Planning; Employment OpportunIties; Instructional Materials; Integrated Curriculum; *Junior High Schools; Occupational Clusters; Occupaticnal Information; Resource Guides; *Resource Materials; Skilled Occupations; Teaching Guides; Unit Plan; Vocational Development IDENTIFIERS Career Exploration; Kentucky ABSTRACT One of 11 guides which can be used as aresource for junior high school teachers in implementing the explorationphase of career education, the guide allows students an opportunity to learn about the construction cluster and theirown personal aptitudes and attitudes. The first unit of the guide providesan overview of the contstruction industry, trends and outlooks, trainingopportunities, and organized labor. The remaining six units deal withsix job classifications within the construction industry: designand planning, carpentry, masonry, electricity, metal, andfinishing. The guide contains units on each of thes3areas along with suggestions for teaching them in the laboratory situation. Each unitspecifies a unit purpose and performance objectives and includes:(1) a brief description of unit content, (2) teaching-learning activities, (3) evaluation techniques, and (4) suggestedresources.
    [Show full text]
  • Civil Technology: Woodworking and Timber
    CIVIL TECHNOLOGY: WOODWORKING AND TIMBER Workbook: Year 2 Term 2 Y2T2: Equipment Date: LESSON 1 The learner is able to: ➢ Identify, describe and demonstrate the correct use, caring and safety of the following measuring tools: Measuring Sliding bevel The sliding T-bevel, also known as a bevel gauge or false square is an adjustable gauge for setting and transferring angles. The handle is usually made of wood or plastic and is connected to a metal blade with a thumbscrew or wing nut. The blade pivots and can be locked at any angle by loosening or tightening the thumbscrew. The bevel can be used to duplicate an existing angle or set to a desired angle by using it with any number of other measuring tools, such as a protractor. QUESTION 1: What is the Sliding bevel used for? a) ______________________________________________________________ ______________________________________________________________ b) ______________________________________________________________ ______________________________________________________________ QUESTION 2: Describe the Sliding bevel ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ Y2:T2 Equipment Date: Lesson 2 The learner is ➢ Identify, describe and demonstrate the correct use, caring able to: and safety of the following tools: Measuring Marking gauge The marking gauge, also known as a scratch gauge, is used in woodworking and metalworking to mark out lines for cutting. The purpose of the gauge is to scribe a line parallel to a reference edge or surface. It is used in joinery. The gauge consists of a beam, a headstock, and a scribing or marking implement, typically a pin, knife or wheel. The headstock slides along the beam and is locked in place by various means: a locking screw or a wedge.
    [Show full text]
  • Using Hand Tools
    Using Hand Tools Unit: Mechanical Systems and Technology Problem Area: Construction Systems Lesson: Using Hand Tools ¢ Student Learning Objectives. Instruction in this lesson should result in students achieving the following objectives: 1 Discuss how to select hand tools. 2 Identify and explain how to use layout tools. 3 Identify and explain how to use cutting, shaping, and boring tools. 4 Identify and explain how to use holding and turning tools. 5 Identify and explain how to use driving and wrecking tools. ¢ List of Resources. The following resources may be useful in teaching this lesson: DRW Educational Systems. Hand Tool Basics Video. Costa Mesa, CA: DRW Educational Systems. Hand Tools Transparency Set. Danville, IL: Interstate Publishers, Inc. Haun, Larry. Homebuilding Basics: Carpentry.Newtown,CT:TauntonPress, Inc., 1999. Herren, Ray V., and Elmer L. Cooper. Agricultural Mechanics Fundamentals & Applications. Albany, NY: Delmar Publishers, 2002. Phipps, Lloyd J., Glen M. Miller, and Jasper S. Lee. Introduction to Agricul- tural Mechanics, Second Edition. Upper Saddle River, NJ: Prentice Hall Interstate, 2004. Phipps, Lloyd J., and Carl L. Reynolds. Mechanics in Agriculture. Danville, IL: Interstate Publishers, Inc., l992. Smith, John E., Shop Tool Identification Transparencies. University of Illinois: Information Technology & Communication Services. Wagner, John D. House Framing. Upper Saddle River, New Jersey: Creative Homeowner, l998. Lesson: Using Hand Tools Page 1 u www.MYcaert.com Copyright © by CAERT, Inc. | Reproduction by subscription only. | L090015 ¢ List of Equipment, Tools, Supplies, and Facilities ü Writing surface ü Overhead projector ü Transparencies from attached masters ü Copies of student lab sheets ü Set of carpentry hand tools ¢ Terms.
    [Show full text]
  • Study Guide: Hand Tools
    STUDY GUIDE: HAND TOOLS Learning Objectives: • The features and benefits of the products you sell. • How to answer your customers’ product-related questions. • How to help your customer choose the right products. • How to increase transaction sizes by learning more about add-on sales and upselling techniques. Chapter 1: Fastening Tools Module 1: Hammers Product Knowledge: Claw Hammer • Use for general carpentry, household chores and nail pulling. • Curved claw offers leverage in removing nails. • Use only with non-hardened, common or finishing nails. • You can choose 16 or 20 oz. weights for general carpentry. For fine cabinetry or light- duty driving, choose 7, 10 and 13 oz. nail weights. • Available with a smooth face for finishing jobs, or a waffled face for more control when hammering large nails into lumber. Framing (Rip) Hammer • Use for ripping apart wooden components and demolition work. • Use only with non-hardened, common or finishing nails. • Choose weights from 20 to 32 oz. for framing and ripping. • Available with milled or waffled faces to grip the nail head and reduce the effect of glancing blows and flying nails. Ball Peen (Ball Pein) Hammer • Use with cold chisels for riveting, center punching and forming unhardened metal work. • Striking face diameter should be about 3/8” larger than the diameter of the head of the object being struck. • Popular sizes are 12 and 16 oz. • Variations include a cross-peen hammer (with a horizontal wedge-shaped face) and a straight-peen hammer (with a vertical wedge-shaped face). Sledgehammer • Use for jobs that require great force, such as breaking up concrete or driving heavy spikes.
    [Show full text]
  • Project Book 1-Chapter 3: Carpentry Hand Tools Quiz April 24, 2020
    Foundations of Woodworking Project Book 1-Chapter 3: Carpentry Hand Tools Quiz April 24, 2020 9-12/ Foundations of Woodworking Project Book 1-Chapter 3 Quiz: [April 24, 2020] Objective/Learning Target: Students will be taking a quiz over chapter 3 to review the material they learned on 4/23/2020. Which of the following clamps consists of a long metal bar with plates or jaws that press against a material and are then tightened by either a powerful spring or a screw shaft handle? -bar clamp -pipe clamp -c-clamp -hand screw clamp 3 Bar Clamp Which of the following clamps has a.C-shape and a threaded metal shaft fitted with a shoe that is designed to swivel? -bar clamp -pipe clamp -c-clamp -hand screw clamp 5 C-Clamp Which of the following tools consists of a round, tapered metal shaft that has a cupped tip designed to fit on top of a brad or finish nail? -nail set -sliding t-bevel -hammer -chisel 7 Nail Set The blade of the block plane is at an angle of _____________________. -30-40 -45-50 -5-10 -20-25 9 20-25 degrees Clamps, screwdrivers, and wrenches fall into what tool type category? -cutting tools -shaping tools -striking tools -fastening tools 11 Fastening Tools Rasps and planes fall into what tool type category? -cutting tools -shaping tools -striking tools -fastening tools 13 Shaping Tools Handsaws, chisels, and knives fall into what tool type category? -cutting tools -shaping tools -striking tools -fastening tools 15 Cutting Tools Nails must be driven straight and true without wasting time and energy, and without damaging valuable materials.
    [Show full text]
  • Tool List 2021-22 All Costs Are Approximate and Are Subject to Change
    Carpentry & Woodworking Tool List 2021-22 All costs are approximate and are subject to change. The trade requires tradespeople to work in many different types of weather conditions. Although the College experience will take place largely in classrooms and shops, it may also take place in the College compound where the construction of buildings may take place or work on outside structures. Students should be prepared to equip themselves accordingly to accommodate these conditions. Advice on necessary tool purchases can be obtained from the instructor of the program. Required Supplies - $620 (Needed for first day of class) Safety Boots (CSA Approved, Steel Toe, Green Symbol) $160 Winter clothing (Coveralls/Overalls, Jacket etc) $300 CSA Approved Hard Hat $40 Safety Glasses (CSA Approved, must be clear lenses) $20 Hearing Protection (as required in shops) $15 Fabric face mask (as a result of COVID-19) $15 Classroom Supplies (pens, paper, binders etc) $50 Sharp EL-531XT Calculator $20 Must have access to a computer/laptop, complete with a camera, microphone, and Microsoft Office. Assiniboine Community College can provide students with a link to download Microsoft Office 365 at no charge. Must have access to the internet Required Tools - $450 (Price Includes Optional Tools below) Prices may vary depending on where tools are purchased. Drafting Pencils - 4H Staedtler or Cat’s Paw (Stanley 55-114 or similar) similar Set of 4 chisels (Marples M444S4N or Carpenter’s apron/tool belt (Ballistic similar) ¼”, ½”, ¾” & 1” Min. 4” or leather) Blade length 16 oz.- 20 oz. framing hammer Screwdriver must include #1 & #2 (Estwing, Plumb, Stanley) Robertson, #2 Phillips, ¼” flat 12” Combination square (Stanley (eg.
    [Show full text]
  • Still Project Requirements
    Special Interest Project Requirements If you see this (*) listed after a project name, it is eligible for Ohio State Fair competition Athletics 300 – You’re the Athlete* - Completed project book and a scrapbook or poster (not larger than a 1/2 sheet of poster board) showing what you learned. ATV 555 - ATV Safety - Completed project book and a scrapbook or poster (not larger than a 1/2 sheet of poster board) showing what you learned. Bicycles 517 - Bicycling for Fun, Level 1 518 - Wheels in Motion, Level 2 - Completed project book, your bicycle, and a scrapbook or poster (not larger than a 1/2 sheet of poster board) showing one of the activities you completed. Career Exploration 382 – Am I Ready for Work? – Completed project book and a scrapbook or poster (not larger than a ½ sheet of poster board) showing what you learned. Clothing Projects If your project required a pattern, you must bring your pattern to project judging. You will need to wear your garment for the judge (You will be able to change at judging - bring your project on a hanger so it won’t get wrinkled). Beginner Clothing Projects- 407 - Accessories for Teens* - Completed project book, pattern, and an accessory you have made (a bag/purse, cummerbund, footwear/shoe covers, hat, gloves, jewelry, removable collar/dickey/jabot, scarf/tie, muffler shawl, socks/hosiery, or suspenders) to add a finishing touch or to achieve a more complete appearance in an outfit you select. Note: Garments such as sweaters or vests are not considered accessories for this project. Also, members may not apply permanent decorations such as patches, smocking, embroidery, needlework, or other non-removable features to ready-to-wear items to complete the requirements of this project, although such techniques may be included in constructing the accessory.
    [Show full text]
  • Unit Four: Wood, Fasteners and Tools
    UNIT FOUR: WOOD, FASTENERS, AND TOOLS 1215 K Street, Ste. 1200 | Sacramento, CA 95814 916-340-3340 | mychf.org/bita BUILDING INDUSTRY TECHNOLOGY ACADEMY: YEAR ONE CURRICULUM YEAR ONE UNIT FOUR: WOOD, FASTNERS AND TOOLS Table of Contents Lesson 1: How Trees Grow Lesson 2: California Forest Resources Lesson 3: Softwood & Hardwood Trees (2 Day assignment) Lesson 4: Adhesives/Glues Lesson 5: Nails Lesson 6: Nail types and Their Uses Lesson 7: Threaded Fastener Notes Lesson 8: Screws, Drives, and Screw Drivers Continue to next page © BITA: A program promoted by California Homebuilding Foundation BUILDING INDUSTRY TECHNOLOGY ACADEMY: YEAR ONE CURRICULUM Lesson 9: Introduction to Hand Tools Lesson 10: Identification of Project Tools Lesson 11: How to use a Saw Lesson 12: How to use a Speed Square and Sliding T-Bevel Lesson 13: How to use a Plane Lesson 14: How to use a Brace & Bit, Hammer, and Chisel Lesson 15: Hand Tool Project (7-10 Day Project) Lesson 16: Project Reflection and Hand Tool Test © BITA: A program promoted by California Homebuilding Foundation Unit Four: Wood, Fasteners and Tools Lesson #1: How Trees Grow Objectives Students will be able to… . Understanding how trees grow, the basic components of a tree, and gather information about California Forests. Common Core Standards Cabinetmaking and Wood Products Pathway A1.4, A1.7, A2.1, A2.2, A3.1, A2.3, A6.1, A6.2 A3.4, A6.7, A4.1, A5.1, A5.2, & A5.4 Residential and Commercial Pathway D2.1, D2.2, D3.1, D3.3, & D4.1 Reading 11-12.4 Writing 11-12.1 RIST 11-12.2 Problem Solving/Critical Thinking 5.4 Health and Safety 6.2, 6.3, 6.6, & 6.12 Responsibility and Leadership 7.4 & 9.3 Demonstration and Application 11.1 Technical Knowledge and Skills 10.1, 10.2, &10.3 Materials Parts of a Tree Handout Twelve Basic Components of a Tree Vocabulary Cornell Notes Example California Forest Resources Information Packet Lesson Sequence .
    [Show full text]