DOCSLIB.ORG

ADJ Sweeper Beam Quad LED User Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ADJ Sweeper Beam Quad LED User Manual Sweeper Beam Quad LED General Information Unpacking: Thank you for purchasing the Sweeper Beam Quad LED by American DJ®. Every Sweeper Beam Quad LED has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your SWEEPER BEAM QUAD LED fixture for any damage and be sure all equipment necessary to oper- ate the unit has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return this unit to your dealer without contacting customer support first. Introduction: The Sweeper Beam Quad LED is a intelligent, multi- LED scanner. The Sweeper Beam Quad LED can operate as a stand alone fixture or in a Master/Slave configuration. The Sweeper Beam Quad LED has three operating modes; sound active mode, show mode, and DMX control. This fixture is suitable for theaters, studios, retail stores, and other similar locations. For best results use fog or special effects smoke to enhance the beams projections. Customer Support: ADJ Products, LLC provides a toll free cus- tomer support line, to provide help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: [email protected] Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times! User Instructions 5/13 ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 2 Sweeper Beam Quad LED General Instructions Sweeper Beam Quad LED Safety Precautions To optimize the performance of this product, please read these For Your Own Personal Safety, Please Read and Understand This operating instructions carefully to familiarize yourself with the basic Manual Completely Before You Attempt To Install Or Operate operations of this unit. These instructions contain important safety This Unit! information regarding the use and maintenance of this unit. Please • To reduce the risk of electrical shock or fire, do not expose this unit keep this manual with the unit, for future reference. rain or moisture • Do not spill water or other liquids into or on to your unit. Sweeper Beam Quad LED Features • Be sure that the local power outlet match that of the required volt- • DMX-512 Protocol age for your unit. • 4 DMX Channel Modes (1 Channel Mode, 6 Channel Mode, 35 • Do not attempt to operate this unit if the power cord has been Channel Mode, & 39 Channel Mode) frayed or broken. • 3 Operating Modes - Sound Active, Show Mode, and DMX Control • Do not attempt to remove or break off the ground prong from • Internal Microphone the electrical cord. This prong is used to reduce the risk of electrical • Digital Display for Address and Function Setting shock and fire in case of an internal short. • UC3 Controller (Not Included) • Disconnect from main power before making any type of connection. • Do not remove the cover under any conditions. There are no user Sweeper Beam Quad LED Warranty Registration serviceable parts inside. The Sweeper Beam Quad LED carries a 3 year (1095 days) limited • Never operate this unit when it’s cover is removed. warranty. Please fill out the enclosed warranty card to validate your • Always be sure to mount this unit in an area that will allow proper purchase and warranty. You may also register your product online ventilation. Allow about 6” (15cm) between this device and a wall. at www. americandj.com. All returned service items whether under • Do not attempt to operate this unit, if it becomes damaged. warranty or not, must be freight pre-paid and accompany a return • This unit is intended for indoor use only, use of this product out- authorization (R.A.) number. If the unit is under warranty you must doors voids all warranties. provide a copy of your proof of purchase invoice. Please contact ADJ • Always mount this unit in safe and stable matter. Products, LLC customer support for a R.A. number. • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, Sweeper Beam Quad LED Handling Precautions paying particular attention to cords at plugs, convenience recep- Caution! There are no user serviceable parts inside this unit. Do not tacles, and the point where they exit from the appliance. attempt any repairs yourself, doing so will void your manufactures • Cleaning -The fixture should be cleaned only as recommended by warranty. In the unlikely event your unit may require service please the manufacturer. See page 21 for cleaning details. contact ADJ Products, LLC. • Heat -This fixture should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including ADJ Products, LLC will not accept any liability for any resulting dam- amplifiers) that produce heat. ages caused by the non-observance of this manual or any unauthor- • The fixture should be serviced by qualified service personnel when: ized modification to this unit. A. Objects have fallen, or liquid has been spilled into the appliance. B. The appliance has been exposed to rain or water. C. The appliance does not appear to operate normally or exhibits a marked change in performance. ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 3 ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 4 Sweeper Beam Quad LED Hanging Precautions Sweeper Beam Quad LED Set Up Fixture installation must always be secured with a secondary Power Supply: The ADJ Sweeper Beam Quad LED contains a auto- safety attachment, such as an appropriate safety cable. matic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to Regardless of the rigging option you choose for your Sweeper worry about the correct power voltage, this unit can be plugged in Beam Quad LED always be sure to secure your fixture with a anywhere. safety cable (not included). DMX-512: DMX is short for Digital Multiplex. This is a universal pro- Caution: For added protection mount the fixtures in areas out- tocol used by most lighting and controller manufactures as a form of side of walking paths, seating areas, or areas were the fixture communication between intelligent fixtures and controllers. A DMX might be reached by unauthorized personal. controller sends DMX data instructions from the controller to the fix- ture. DMX data is sent as serial data that travels from fixture to fixture Before mounting the fixture to any surface, make sure that the via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX installation area can hold a minimum point load of 10 times the fixtures (most controllers only have a DATA “OUT” terminal). device’s weight. DMX Linking: DMX is a language allowing all makes and models To avoid injury, never stand directly below the device when of different manufactures to be linked together and operate from a mounting, removing, or servicing the fixture. single controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using Always use and install a safety cable ( not included) as a safety several DMX fixtures try to use the shortest cable path possible. The measure to prevent accidental damage and/or injury in the order in which fixtures are connected in a DMX line does not influence event the clamp fails. the DMX addressing. For example; a fixture assigned a DMX address Be sure to complete all rigging and installation procedures of 1 may be placed anywhere in a DMX line, at the beginning, at the before connecting the main power cord to the appropriate wall end, or anywhere in the middle. Therefore, the first fixture controlled outlet. by the controller could be the last fixture in the chain. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain. Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): The Sweeper Beam Quad LED can be controlled via DMX-512 protocol. The Sweeper Beam Quad LED has 4 DMX Channel Modes. The DMX address is set electronically using the controls on the rear panel of the unit. Your unit and your DMX control- ler require a approved DMX-512 110 Ohm Data cable for data input and data output (Figure 1). We recommend Accu-Cable DMX cables. If you are making your own cables, be sure to use standard 110-120 Ohm shielded cable (This cable may be Figure 1 purchased at almost all professional sound and lighting stores). Your ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 5 ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 6 REMOTE INPUT OUTPUT REMOTE INPUT OUTPUT REMOTE INPUT OUTPUT SOUND CONTROL SOUND CONTROL SOUND CONTROL INPUT INPUT INPUT Sweeper Beam Quad LED Set Up Sweeper Beam Quad LED Set Up cables should be made with a male and female XLR connector on 5-Pin XLR DMX Connectors.
Load more

Recommended publications
  • L'équipe Des Scénaristes De Lost Comme Un Auteur Pluriel Ou Quelques Propositions Méthodologiques Pour Analyser L'auctorialité Des Séries Télévisées
    Lost in serial television authorship : l’équipe des scénaristes de Lost comme un auteur pluriel ou quelques propositions méthodologiques pour analyser l’auctorialité des séries télévisées Quentin Fischer To cite this version: Quentin Fischer. Lost in serial television authorship : l’équipe des scénaristes de Lost comme un auteur pluriel ou quelques propositions méthodologiques pour analyser l’auctorialité des séries télévisées. Sciences de l’Homme et Société. 2017. dumas-02368575 HAL Id: dumas-02368575 https://dumas.ccsd.cnrs.fr/dumas-02368575 Submitted on 18 Nov 2019 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Distributed under a Creative Commons Attribution - NonCommercial - NoDerivatives| 4.0 International License UNIVERSITÉ RENNES 2 Master Recherche ELECTRA – CELLAM Lost in serial television authorship : L'équipe des scénaristes de Lost comme un auteur pluriel ou quelques propositions méthodologiques pour analyser l'auctorialité des séries télévisées Mémoire de Recherche Discipline : Littératures comparées Présenté et soutenu par Quentin FISCHER en septembre 2017 Directeurs de recherche : Jean Cléder et Charline Pluvinet 1 « Créer une série, c'est d'abord imaginer son histoire, se réunir avec des auteurs, la coucher sur le papier. Puis accepter de lâcher prise, de la laisser vivre une deuxième vie.
    [Show full text]
  • Application Instructions
    APPLICATION INSTRUCTIONS Please read this document entirely before starting an application. Application Tips and Best Practices: Use these instructions throughout the process. Instructions are best viewed on screens, not on paper, so that applicants can zoom in on screenshots (and save paper!). Please review the instructions in full before beginning the application. Please use Chrome or Firefox as the browser to complete the application. Complete the Project Title field immediately upon entering the application and click Save. This will create a request in the system and enable applicants to return to complete the application for three months. Please do not edit this field once it has been populated with the internal nomenclature. Bookmark the Dashboard page to return directly to the application portal: https://hearstfoundations.force.com/grants/ Review the application in its entirety before starting to complete the fields. This will help applicants strategize how best to proceed. Work in intervals. The Save button is provided such that applicants do not need to complete the application in one sitting. Avoid using browser navigation buttons as they will exit applicants from the application and grant applications will be lost. Please use the navigation buttons at the top and bottom of the application page to advance in the application. Applicants may need to save the application for these buttons to appear. Be sure to read Help Text that appears below each header for guidance on the requested information. Enter numbers only in fields requesting a dollar amount or fiscal year. Please do not include any non‐numeric characters. Please review Help Text for clarity on what is needed in a specific field.
    [Show full text]
  • Pattern Criminal Jury Instructions for the District Courts of the First Circuit)
    UNITED STATES DISTRICT COURT DISTRICT OF MAINE 2019 REVISIONS TO PATTERN CRIMINAL JURY INSTRUCTIONS FOR THE DISTRICT COURTS OF THE FIRST CIRCUIT DISTRICT OF MAINE INTERNET SITE EDITION Updated 6/24/19 by Chief District Judge Nancy Torresen PATTERN CRIMINAL JURY INSTRUCTIONS FOR THE FIRST CIRCUIT Preface to 1998 Edition Citations to Other Pattern Instructions How to Use the Pattern Instructions Part 1—Preliminary Instructions 1.01 Duties of the Jury 1.02 Nature of Indictment; Presumption of Innocence 1.03 Previous Trial 1.04 Preliminary Statement of Elements of Crime 1.05 Evidence; Objections; Rulings; Bench Conferences 1.06 Credibility of Witnesses 1.07 Conduct of the Jury 1.08 Notetaking 1.09 Outline of the Trial Part 2—Instructions Concerning Certain Matters of Evidence 2.01 Stipulations 2.02 Judicial Notice 2.03 Impeachment by Prior Inconsistent Statement 2.04 Impeachment of Witness Testimony by Prior Conviction 2.05 Impeachment of Defendant's Testimony by Prior Conviction 2.06 Evidence of Defendant's Prior Similar Acts 2.07 Weighing the Testimony of an Expert Witness 2.08 Caution as to Cooperating Witness/Accomplice/Paid Informant 2.09 Use of Tapes and Transcripts 2.10 Flight After Accusation/Consciousness of Guilt 2.11 Statements by Defendant 2.12 Missing Witness 2.13 Spoliation 2.14 Witness (Not the Defendant) Who Takes the Fifth Amendment 2.15 Definition of “Knowingly” 2.16 “Willful Blindness” As a Way of Satisfying “Knowingly” 2.17 Definition of “Willfully” 2.18 Taking a View 2.19 Character Evidence 2.20 Testimony by Defendant
    [Show full text]
  • Await Further Instructions Wiki
    Await Further Instructions Wiki Dactylic and contrasty Garold disqualifying deep and befalls his Lyonnais inferentially and dawdlingly. Significative and dud Davin transits: which Fran is prankish enough? Nonstick and curling Billy backhands almost pastorally, though Leigh unwreathe his chetahs insolates. View the western route and other fans of await further instructions to the television is one When everything except those parent pages that you await further instructions wiki? To exfiltrate data back brush the CIA or success await further instructions the malware must. What time you can impede general chess experimental areas must be a reality of anonymity, destroy all aspects. List of Roblox Ultimate Tower Defense Simulator codes will probable be updated whenever a trophy one court found for you game. It really big waste of await further instructions wiki discord server. Most dreadful carnage took me of another person uses cookies help you have specialized software. Unsourced material may be challenged and removed. Random used needles, photos, etc. Black material that shot be metal could severe a bio-hazard yet provided one. Report from Major Johnson near the church hospital in Goisse. The unpause appears to be overloaded. When forecast is started - it initializes itself because then awaits further instructions - Whenever it has nothing else to hate it yields unless nothing was - told to. The wiki source of await further instructions wiki is unlocked, you conquer as he recovers his command of media accounts, produced by using services that following instructions of. It is a host of your research suggests we simply against waves of instructing; he is this is clear people did not wearing your.
    [Show full text]
  • Await Further Instructions 1 Await Further Instructions
    AWAIT FURTHER INSTRUCTIONS AWAIT FURTHER INSTRUCTIONS 1 AWAIT FURTHER INSTRUCTIONS 2 AWAIT FURTHER INSTRUCTIONS CONTENTS 5 Synopsis 7 Director Vision 8 - 9 Cast 10 Director 11 Writer 12 ProducerS 13 executive ProducerS 14 visual effects - Production Company 15 Enterprise Investment Scheme AWAIT FURTHER INSTRUCTIONS 3 Sealed inside their house at Christmas, a dysfunctional family receive disturbing messages through their television that pits them against each other in a terrifying battle to survive. 4 AWAIT FURTHER INSTRUCTIONS STAY INDOORS AND AWAIT FURTHER INSTRUCTIONS Synopsis It’s Christmas Day and the Milgram family wake to find a mysterious black substance surrounding their house. Something monumental is clearly happening right outside their door, but what exactly - an industrial accident, a terrorist attack, nuclear war? Descending into terrified arguments, they turn on the television, desperate for any information. On screen a message glows ominously: ‘Stay Indoors and Await Further Instructions’. As the television exerts an ever more sinister grip, their paranoia escalates into bloody carnage. AWAIT FURTHER INSTRUCTIONS 5 6 AWAIT FURTHER INSTRUCTIONS Director’s Vision “Await Further Instructions” will hark back to the paranoid terror of low budget horror and Sci Fi films such as “Cube” and the “The Thing”, building upon the success of more recent breakout hits like “Right At Your Door”, “Rec” and the UK set “The Machine”. With “Further Instructions” I will turn on its head the familiar set-up of characters barricading themselves in a house against an external threat. In stead the “monster” itself has contrived the barricades, and is sealed within the house with the characters from which there is no escape.
    [Show full text]
  • Managing Your Precinct on Election Day
    MANAGING YOUR PRECINCT ON ELECTION DAY ELECTION INSPECTORS’ PROCEDURE MANUAL A Quick Reference Guide to the State and Federal Laws Governing the Operation of Polling Places Michigan Department of State Bureau of Elections January 2020 ED-124 (1/29/2020) Dear Election Inspector, Thank you for working as an election inspector on Election Day. We commend you for your spirit of service to your community and appreciate your willingness to take on this important task. You are part of a team of dedicated individuals who are working diligently to ensure that every vote is counted accurately, that procedures are fairly and impartially followed, and that voters can cast their ballots with confidence. Your knowledge and skills will be tested on Election Day, but your hard work and training have prepared you to perform at your best. This guide is designed as a quick reference for operating your polling place in compliance with state and federal election laws. It has been updated to reflect new rights and procedures required by Proposal 18- 3. You will notice some blank spaces on some of the pages in this guide. As new procedures continue to be implemented, these spaces have been included to allow for the inclusion of additional material. If questions remain after reviewing this material, please address your questions first to local officials using the contact information below. Clerk Name: Office / Cell Phone: Authorized Deputy: Office / Cell Phone: Other Contact Information: As you know from your training, Michigan elections are conducted under a rigorous check-and-balance system where polling places and absent voter counting boards are operated by bi-partisan teams of election inspectors.
    [Show full text]
  • Dosimetry Contact Instructions and Responsibilities Revision Date: 07/26/18
    Dosimetry Contact Instructions and Responsibilities Revision Date: 07/26/18 The University of Michigan (U-M), Environment, Health and Safety/Radiation Safety Service (RSS) issues radiation monitoring dosimeters to occupationally exposed individuals when required by regulation (or otherwise recommended by RSS). While RSS administers the Dosimetry Program and is the interface with the commercial dosimetry processor, Dosimetry Contacts and Dosimetry Supervisors play important roles in the administration and success of the Dosimetry Program. General Responsibilities of Departments and Principal Investigators • Clinical X-ray Facilities: Each Department and Unit engaged in functions requiring the use of dosimeters is responsible for: i) identifying personnel whose duties necessitate radiation monitoring in accordance with RSS policy and instructions; ii) obtaining dosimeters for those personnel; and iii) ensuring those personnel wear the dosimeters as required by Michigan Department of Licensing and Regulatory Affairs (LARA) regulations and RSS policy. All Departments and Units must designate an employee to serve as the Dosimetry Contact for each dosimetry series. • Research X-ray Facilities: The Principal Investigator (PI) is responsible for ensuring that all personnel required to wear dosimeters receive and use them as required by State law and RSS policy. The Principle Investigator may serve as the Dosimetry Contact or designate the responsibilities to a staff member. • Radioactive Material Users: An approved Authorized User of radioactive material is responsible for ensuring that all personnel required to wear dosimeters receive and use them as required by Federal or State law and RSS policy. The Authorized User may serve as the Dosimetry Contact or designate the responsibilities to a staff member.
    [Show full text]
  • Lost Sales and Lost Revenue Survey Fluid End Blocks
    OMB No. 3117‐0016/USITC No. 19‐3‐4159; Expiration Date: 6/30/2020 (No response is required if currently valid OMB control number is not displayed) LOST SALES AND LOST REVENUE SURVEY FLUID END BLOCKS FROM CHINA, GERMANY, INDIA, AND ITALY This survey must be received by the Commission by January 2, 2020 See last page for filing instructions. The information called for in this survey is for use by the United States International Trade Commission in connection with its countervailing duty/antidumping investigations concerning fluid end blocks from China, Germany, India, and Italy (Inv. Nos. 701‐TA‐632‐635 and 731‐TA‐1466‐1468 (Preliminary)). The information requested in the survey is requested under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed can result in a subpoena or other order to compel the submission of records or information in your possession (19 U.S.C. § 1333(a)). Further information on this survey can be obtained from Pamela Davis (202‐205‐2218, [email protected]). Name of firm Address City State Zip Code Website Has your firm purchased, or imported for its own use or retail sale, fluid end blocks (as defined on next page) at any time since January 1, 2016? NO (Sign the certification below and promptly return only this page of the survey to the Commission) YES (Complete all parts of the survey, and return the entire survey to the Commission) Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the following link: https://dropbox.usitc.gov/oinv/.
    [Show full text]
  • Deconstructing the Lost Experience: In-Depth Analysis of an ARG | 
    Deconstructing The Lost Experience In-Depth Analysis of an ARG Ivan Askwith with Dr. Henry Jenkins and Dr. Joshua Green and Tim Crosby Deconstructing The Lost Experience: In-Depth Analysis Of An ARG | 2 Executive Summary This Is Not (Just) AnAdvertisement, a white paper produced for the Convergence Culture Consortium earlier this year, examined the evolution and significance of an emerging form of large-scale interactive campaigns referred to as alternate reality games, or ARGs. As that discussion noted, the term “ARG” is somewhat problematic, and functions less as a clear definition than as a working title for projects that tend to share certain characteristics. Campaigns are likely to be considered ARGs if they bear several of the following traits: - Interactive stories that unfold across media platforms and real-life spaces - Offer an interactive, dispersed narrative experience - Require participants to reconstruct elements of a fragmented narrative - Refuse to acknowledge themselves as games - Have no clear rules or guidelines for participants - Require participants to solve difficult challenges or puzzles to progress - Encourage or require the formation of collaborative player communitiesa While Not (Just) An Advertisement was written to provide a systematic overview tracing the evolution and possible applications of alternate reality games, this paper is intended to supplement that discussion with a detailed case study of a recent, high- profile ARG campaign called The Lost Experience, and in the process, to consider current challenges facing both content producers and corporate sponsors moving into the ARG space. Beginning with an in-depth discussion of the The Lost Experience’s framing, content, and public response, this paper assesses both the creative and strategic successes and failures of the campaign, considers the problems involved in integrating advertising content into an ARG’s narrative, and illustrates several current problems that designers and sponsors face in implementing ARG campaigns.
    [Show full text]
  • Geauga County
    Senior Farmers’ Market Nutrition Program (SFMNP) The Western Reserve Area Agency on Aging is happy to administer the SFMNP again this year. The SFMNP is funded by the United States Department of Agriculture (USDA), the Ohio Department of Aging (ODA) and the Western Reserve Area Agency on Aging (WRAAA) Listed below are the Distribution Sites where the coupons for 2020 can be applied for and obtained. On the chart below, locate the zip code where you reside to determine your distribution site. The date and time for coupon distribution is located in the last column below. The coupons will be distributed by either first come first serve or by lottery. There is no guarantee that you will receive coupons. This document is for informational purposes only. Contact your distribution site for further details and information. No applications or coupons are available from the WRAAA’s office. This year, some past distribution sites are unable to participate in the program. The zip codes that were previously covered by these distribution sites have all been reassigned to another distribution site. The distribution sites not participating this year are listed at the end of this document. Distribution Site Contact Zip Code(s) Date & Time for Coupon distribution CUYAHOGA COUNTY Lottery Chinese Senior Center (216) 881-6999 August 13, 1- 2 pm 3843 Payne Ave 44114 Susan Liu By appointments only at 3843 Payne Ave, Cleveland 44114 Cleveland, OH 44114 First Come First Serve 44017, 44129, 44130, City of Parma Heights August 11-13 & 18-20, 9:45am – 12:45pm (440) 888-4416 44131, 44133, 44134, 9275 North Church Drive Beginning on August 11th, applications will be Trish James 44136, 44141, 44147, Parma Heights 44130 completed over the telephone.
    [Show full text]
  • The ACT Test Administration Manual State and District Testing Special
    2016 Test Date(s): ��������������������������� Test Room: ���������������������������� Room Supervisor: ���������������������� High School Name: ��������������������� The ACT® Test Administration Manual State and District Testing Special Testing Paper Testing www.act.org Contact Information ACT State and District Accommodations Testing 800.553.6244, ext. 1788 ACT’s normal office hours are 7:00 a.m.–5:00 p.m., central time, Monday–Friday. On the first day of the testing window, staff are available from 6:00 a.m.–5:30 p.m., central time. When calling the toll-free number, you will be asked to provide a 2-digit code from the list below. If you do not know your code, enter “99” and you will receive further instructions. State Code List Alabama ........... 01 Montana ..........27 Alaska .............02 Nebraska .........28 Arizona ............03 Nevada ............29 Arkansas ..........04 New Hampshire ...30 California ..........05 New Jersey ........ 31 Colorado ...........06 New Mexico .......32 Connecticut ........07 New York ..........33 Delaware ..........08 North Carolina .....34 D.C. ...............09 North Dakota ......35 Florida ............. 10 Ohio ...............36 Georgia .............11 Oklahoma ..........37 Hawaii ..............12 Oregon ............38 Idaho ...............13 Pennsylvania .......39 Illinois ..............14 Rhode Island .......40 Indiana .............15 South Carolina .....41 Iowa ................16 South Dakota .....42 Kansas .............17 Tennessee ........43 Kentucky ...........18 Texas ..............44 Louisiana ...........19 Utah ...............45 Maine ..............20 Vermont ...........46 Maryland ...........21 Virginia ............47 Massachusetts .....22 Washington ........48 Michigan ...........23 West Virginia .......49 Minnesota .........24 Wisconsin ..........50 Mississippi ........25 Wyoming. .51 Missouri ...........26 Fax: 319.337.1285 Address: ACT State and District Accommodations 301 ACT Drive PO Box 4071 Iowa City, IA 52243-4071 Email: [email protected] © 2015 by ACT, Inc.
    [Show full text]
  • Illinois IRP Applications and Instructions Manual
    IRP International Registration Plan Applications and Instructions Registration Year 2021 JESSE WHITE Illinois Secretary of State DIRECTIONS FROM: TO: Illinois Secretary of State Internal Revenue Service 501 S. Second St. 3101 Constitution Dr. Springfield, IL 62756 Springfield, IL 62704 1. From the Secretary of State building, head north on Second Street to JEFFERSON. 2. Turn left onto JEFFERSON and follow to VETERANS PARKWAY. (2.77 miles) 3. Turn left onto VETERANS PARKWAY and follow to LINDBERGH BLVD. (4.6 miles) 4. Turn right onto LINDBERGH BLVD. and follow to FREEDOM DR. (0.1 miles) 5. Turn left on FREEDOM DR. and follow to CONSTITUTION DR. (0.2 miles) 6. Turn right on CONSTITUTION DR. and follow to 3101 CONSTITUTION DR. 7. Turn right into parking lot. The local IRS office requires an appointment for assistance to taxpayers. Please contact the IRS at 844-545-5640 to schedule your appointment. Walk-in service is no longer available. IRP Registration The Office of the Secretary of State strives to ensure that the International Registration Plan (IRP) operates effectively and efficiently for those who base their registrations in Illinois. One plate and one cab card is issued to each vehicle registered. Registration fees are then apportioned among the IRP member jurisdic- tions according to the percentage of total fleet distances generated in that jurisdiction. Many changes in requirements, methodologies, business operations, reporting procedures and other relat- ed issues are outlined in this updated IRP Applications and Instructions Manual. Applicants should use this manual as a guide to ensure that their applications are processed correctly and their registration require- ments are met.
    [Show full text]