DPMS Firearms, LLC Is A

DPMS Firearms, LLC is a:

• Class 07 Manufacturer of Firearms • Class 08 Importer of Firearms • Importer/Exporter • Type 3 Machine Gun Dealer • Type 2 Machine Gun Manufacturer

IMPORTANT INFORMATION Customers must be aware and responsible for your state’s Firearms Possession laws as they pertain to AR/Panther™ Semi- Auto rifles. Please call your state or local law enforcement offices or visit the NRA at (www.nra.org), or the ATF website (www.atf.gov) for further information. Rifle/Lower Receiver Kit Notice: Please understand that DPMS, Inc. sells stripped lower receivers to Federal Firearms Li- cense dealers throughout the U.S. This allows the dealer to manufacture a rifle using our parts or kits from our competitors parts, kits or assemblies. In some cases the rifle may or may not be manufactured by DPMS, Inc. If you feel that the quality does not meet your expectations, please contact a representative at DPMS, Inc. The representative will con- firm that the rifle with a DPMS lower receiver was in fact manufactured by DPMS, Inc., rather than from a competitors kit or competitors parts. DPMS rifles are not sighted in for any particular distance. Our rifles have been test fired for proper function only.

Please Note: Warning: • Minimum $4,500.00 for • Please read the operation manual before shooting your firearm. • Always point weapon in safe direction. master dealer pricing • Always ensure that the safety selector is fully engaged until ready to fire. • Minimum $100,000.00 for • Safety is fully engaged only when it is rotated counter-clockwise until it reaches the positive each rifle order to receive stop, and it can move no further. wholesale pricing • A safety which is not fully engaged will not prevent discharge of the weapon. • Never chamber a round until you are ready to shoot. Free operation manuals are available upon request. Protect our children, please store your firearms responsibly.

Benefits of a DPMS Product: 1. All parts meet or exceed Mil-Spec. 2. Uppers & Lowers are hardcoat anodized to Mil-Spec MIL-P-8625A 3. Hi-Tech Teflon coating over the anodizing for matte finish and lubricity 4. Front and rear pivot pins are machined to a tighter tolerance for accurizing 5. All barrels and rifles are test fired a minimum of 10 rounds 6. Over 10 upper receiver choices 7. Aircraft alloy aluminum lower receiver 8. We offer our lowers and uppers in black 9. Thermoset heat-resistant Mil-Spec A2 Handguards not commercial 10. Aluminum Mil-Spec door assembly (not plastic) 11. Aluminum magazine catch button (not plastic) 12. Aluminum trigger guard (not plastic) 13. Aluminum Delta/slip ring (not plastic) INDEX .45 Parts & Accessories ...... 101-102 Grips, Vertical...... 63-64 Bull Twenty A-15 Rifle...... 17 Accu-wedge ...... 75 Gun Cases ...... 105-107 Bull Twenty-Four A-15 Rifle...... 18 Action Block...... 111 Gunsmithing ...... 43 Bull Sweet Sixteen Rifle ...... 16 Aimpoint Scopes & Accessories...... 97-98 Gunsmithing Tools ...... 111-113 Classic 16 Rifle...... 24 Anti-Walk Pins ...... 74 Handguards ...... 60-62 Classic Rifle ...... 20 Apertures ...... 65 Handguard Accessories ...... 64 DCM Rifle ...... 19 Armorer’s Kit ...... 112 Headspace Gauges ...... 113 Kitty-Kat ...... 30 Armorer’s Tools...... 111-113 Holographic Diffraction Sight ...... 101 Law Enforcement Rifles ...... 30-31 Barrel Assemblies & Parts ...... 32-37 KNS Precision Front Sight Posts ...... 68 Lo-Pro Classic Rifle ...... 25 .338 Barrel Assembly ...... 32 KNS Precision Pins...... 75 Lite 16” Rifle ...... 24 .308 Barrel Assemblies ...... 32 Leupold Scopes ...... 99 Lite 20” Rifle ...... 20 .300 RSAUM Barrel Assembly...... 32 Lower Receivers, Assemblies ...... 38-40, 73 LR-338L 18” Lite Contour...... 4 .260 Barrel Assemblies...... 32-33 .338 Federal...... 38 LR-308 24” SST ...... 9 .243 Barrel Assembly ...... 33 .308 Winchester...... 38, 40, 73 LR-308B 18” Bull ...... 8 6.5 Creedmoor Barrel Assemblies...... 33 .300 Remington SAUM...... 38 LR-308C 20” Heavy ...... 11 7.62 x 39 Barrel Assemblies...... 33 .260 Remington...... 38 LR-308L 18” Lite Contour...... 4, 8 6.8mm SPC Barrel Assemblies ...... 33 .243 Winchester ...... 38 LR-308T 16” Heavy...... 10 .223/5.56 Barrel Assemblies...... 34-36 6.5 Creedmoor ...... 38 LR-308AP4 16” Carbine ...... 10 .204 Ruger Barrel Assembly...... 29 7.62 x 39mm...... 39 LR-30S ...... 9 Short Barrel/Restricted ...... 36 6.8mm Remington SPC...... 39 LR-260 24” SST ...... 13 Barrels...... 49-51 .223 Rem./5.56 NATO ...... 39-40, 73 LR-260H 20” Heavy ...... 12 Bayonet & Lug...... 64 .204 Ruger ...... 39 LR-260L 18” Lite Contour...... 12 Bipods & Parts ...... 91 California Single Shot...... 73 LR-243 20” Heavy...... 13 Birchwood-Casey Products ...... 113 Lower Receiver Parts Kit & Parts...... 73-75 LR-204 24” SST ...... 29 Bolts & Parts ...... 37, 52 M1 Garand Stock...... 115 LR-6.5 24” SST ...... 5 6.8mm Bolt & Parts ...... 52 M-14 Scope Mount ...... 94 LRT-SASS...... 11 7.62x39mm Bolt & Parts ...... 52 M203 Handguard ...... 115 Panther Bolt Action...... 4 Southpaw Bolt & Parts ...... 52 Mag Releases ...... 40, 47, 73-74 Panther Carbine...... 26 Bolt Carriers ...... 37 Magazines...... 76-80 Panther Carbine A2 ...... 26 Boreguides & Bore Light ...... 112 .308 Magazines ...... 76 Panther Mark 12 ...... 23 Brass Catcher...... 105 .300 RSAUM Magazines...... 76 Panther Mini SASS...... 22 Buffer Assemblies...... 84, 86 7.62x39mm Magazines...... 76 Panther SDM-R ...... 22 Buttstocks, Buttstock Parts...... 82-86 6.8mm SPC Magazines ...... 76 Pardus Rifle ...... 16 Buttstock Accessories...... 83-84, 86 .223/5.56 Magazines ...... 77 Pump Rifle & Pistol ...... 28 Cases & Pouches...... 105-107 Magazine Accessories...... 76, 78-80 Race Gun...... 19 Charging Handle Latch, Parts...... 55 Magazine Parts...... 76-78 Single Shot Rifle...... 28 Cheek Pieces...... 83-84, 86 “Mangonel™” Flip-Up Sights ...... 42, 65, 67 Southpaw Rifle ...... 21 Chromium Plated Parts ...... 37, 40, 55 Front Flip-Up Sight...... 42, 65 Rifle Kits...... 48 “Clawshells” ...... 114 Rear Flip-Up Sight...... 42, 67 Safety Blocks ...... 111 Cleaning Accessories, Kits & Link...... 108-110 Manuals & Books ...... 116-118 Scabbard...... 64 Clothing...... 123-124 Mat, Shooters ...... 106 Scope Covers ...... 100 Compensators & Flash Hiders ...... 69-71 Mounts ...... 92-94 Scope Mounts ...... 92-94 .308 and Large Caliber...... 69 Muzzle Brakes & Parts...... 71 Scope Rings ...... 94-95, 98 7.62x39mm ...... 69 New Products...... 4-5, 123-124, 126 Scopes ...... 96-97, 99-100 .223/5.56 Compensators ...... 70-71 Offset Bushing, Screw & Nut ...... 75 Screw & Pin Set...... 75 Cyrogenic Treating...... 49 Order Form ...... 122 Selector Switches ...... 40, 48, 73 Detachable Carrying Handle ...... 52, 53 Ordering Info ...... 123 Sightron Scopes...... 96 .308 Detachable Carrying Handle ...... 52 Panther Claws...... 111 Sights (Eotech & Trijicon) ...... 101 .223/5.56 Detachable Carrying Handle ...... 53 “Pardus™” Carbine Stock ...... 41, 85 Sight Tools ...... 66, 114 Diagrams...... 46-48,119 Picatinny Rail Covers ...... 64 Slings & Adapters ...... 87-90 DPMS Logo Merchandise...... 123-126 Pins...... 75 Snap Caps...... 113 Dry Fire Device ...... 113 Punch Set...... 112 Southpaw Upper Receivers...... 54 DVDs...... 118 Quick Takedown Pin ...... 75 Spec Ops Slings/Accessories...... 90 EM-16 Parts, Misc...... 115 Rapidex Knob ...... 66 Surefire Flashlights & Mounts...... 103-104 Extractors ...... 37, 52 Rear Sights & Parts ...... 65-66 Tactical Bolt Catch ...... 73 Flash Hiders...... 71 Rear Tensioning Pin...... 75 Tactical Latch...... 55 Flashlights ...... 103-104 “Receiver Rugs™”...... 41, 72 Taper Pins ...... 75 Flashlight Mounts ...... 102 Recoil Pads...... 84, 86 Titanium Nitrate Coated Parts ...... 37, 40 “Flipper, The”...... 111 Replacement Parts...... 46-48 Tools ...... 111-113 Followers ...... 76-78 Rifles ...... 4-31 Triggers ...... 74 Free Float Tubes & Parts ...... 57-60 6.8mm AP4 Carbine 16”...... 15 Upgrades...... 43-45 .308 Free Float Tubes ...... 57-58 6.8mm Classic Flattop 20” ...... 15 Upper Receiver Parts Kit & Parts ...... 52, 53 .223/5.56 Free Float Tubes ...... 58-60 7.62 x 39 Rifle 16” ...... 14 Upper Receivers/Assemblies...... 52-54 Front Sights & Parts ...... 67 7.62 x 39 Rifle 20” ...... 14 .308 Upper Receivers...... 52 Front Sight Posts & Parts ...... 68 A2 Tactical 16” Rifle ...... 25 .223/5.56 Upper Receivers...... 53-54 Gas Blocks ...... 56-57 “The Agency” Rifle...... 23 Valdada Scopes...... 100 .308 Gas Blocks...... 56 AP4 Carbine Rifle ...... 27 Vice Jaws ...... 111 .223/5.56 Gas Blocks...... 57 AP4 Carbine w/Miculek Comp...... 27 Wolff Springs...... 52, 74, 78, 114 “GlacierGuards™” ...... 42, 62 Arctic Panther Rifle...... 17 Wrenches...... 111-112 Grips, Pistol...... 80-81 Bull 24 Special Rifle ...... 18 Scope Shown: Leupold FX-II 4X33mm

Note: RFB-308 Scope & rings not included. Retail ...... POR

Cal: .308 Win.

BARREL CHAMBER ACTION STOCK WEIGHT LENGTH

• 24” Length, Fluted 308 • Winchester 70-type Action • 4140 Chrome-moly steel • Fluted Bolt, manganese phosphated barrel, Teflon coated black • Hogue Overmold Pillar • 8.5 lbs PANTHER • .308 Winchester • Controlled Feed/Claw Extractor • 46.25” • 6 grooves, right-hand Bedded Stock (Empty) • 3-Position Safety BOLT ACTION • 1x10 twist, button rifled • Hinged Floorplate Magazine (RFB-308) • Integral compensator

RFLR-338L

Retail ...... $1499.00

Scope Shown: LEU-56994 Leupold Mark 4 MR/T 1.5-5x20mm, M3 Please Note: Note: Cal: .338 Fed. Additional Upgrades Scope, rings & mount not included. Located On Pages 43-45 This rifle comes with 1- 4 rd. & 1- 19 rd. Magazine, 1- Nylon Web Sling and 1- Cleaning Kit BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 18” Length • 416 Stainless steel Lite • Phosphated 8620 steel bolt PANTHER Contour, Black Teflon coated carrier, heat treated and plated. • None • Carbon Fiber Free Float Tube • 6 grooves, right-hand • .338 Federal • Phosphated steel bolt, heat LR-338L (mounting optics only) w/bipod stud, Standard Length • 1x9 twist, button rifled treated and plated per Mil (RFLR-338L) • Custom Compensator Spec. • Lightweight Gas Block

• 18” Length • 416 Stainless steel Lite • Phosphated 8620 steel bolt PANTHER Contour, Black Teflon coated carrier, heat treated and plated. • None • Carbon Fiber Free Float Tube • 6 grooves, right-hand • .308 Winchester • Phosphated steel bolt, heat LR-308L (mounting optics only) w/bipod stud, Standard Length • 1x10 twist, button rifled treated and plated per Mil (RFLR-308L) • Custom Compensator Spec. • Lightweight Gas Block

• 24” Length • Phosphated 8620 steel bolt PANTHER • 416 Stainless steel bull barrel carrier, heat treated and plated. • None • Ribbed aluminum free float tube • 6 grooves, right-hand • 6.5 Creedmoor • Phosphated steel bolt, heat • Standard Length LR-6.5 (mounting optics only) • 1x7.5 twist, button rifled treated and plated per Mil • Bipod stud installed NEW RIFLES for 2008 NEW RIFLES for (RFLR-65) • Koelbl Single-Rail Gas Block Spec.

4 Scope Shown: LEU-56994 Leupold Mark 4 MR/T 1.5-5x20mm, M3 Note: Scope & rings RFLR-308L not included.

Retail ...... $1499.00

Please Note: Additional Upgrades Located On Pages 43-45 Cal: .308 Win.

Scope Shown: LEU-57050 Leupold Mark 4 MR/T 3-9x36mm, M1 IL RFLR-65 Note: Scope & rings not included. Retail ...... $1159.00

Please Note: Additional Upgrades Located On Pages 43-45 Cal: 6.5 Creedmoor

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH

• A3-Style Flattop, lightweight upper, extruded from 6066-T6 aluminum • Milled from a solid billet of 6061-T6 2008 NEW RIFLES for • Skeletonized black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black aluminum w/trap door assembly • Dust cover • Hard coat anodized per Mil Spec and • 7.99 lbs • Hogue Rubber Grip with Finger • 39.125” • Forward assist and shell deflector Teflon coated black (Empty) Grooves • Right hand ejection • Integral trigger guard • JP Adjustable Trigger • A3 Height, Picatinny Rail • Aluminum magazine release button

• A3-Style Flattop, lightweight upper, extruded from 6066-T6 aluminum • Milled from a solid billet of 6061-T6 • Hard coat anodized per Mil Spec and Teflon coated black aluminum • Skeletonized black Zytel mil spec • Dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 7.99 lbs • 39.125” • Forward assist and shell deflector Teflon coated black • G27 Tactical Pistol Grip (Empty) • Right hand ejection • Integral trigger guard • JP Adjustable Trigger • A3 Height, Picatinny Rail • Aluminum magazine release button

• A3-style Flattop • Milled from a solid billet of 6061-T6 • Thick walled, extruded from 6066-T6 aluminum aluminum • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 11.3 lbs • Dust cover • 43.6” Teflon coated black • A2 Pistol Grip (Empty) • Shell deflector and forward assist machined as one unit • Integral trigger guard • Right hand ejection • Standard AR-15 Trigger Group • A3 Height, Picatinny Rail • Aluminum magazine release button 5 2005 NRA Shooting Illustrated RFLR-308 “Rifle of the Year” Retail ...... $1159.00

Scope Shown: LEU-57050 Leupold Mark 4 MR/T Please Note: Additional Upgrades 3-9x36mm, M1 IL Cal: .308 Win. Located On Pages 43-45 Note: Scope & rings not included.

Optic Shown: HDS-552 EOTech 552 Note: Please Note: Optic not included. Additional Upgrades Located On Pages 43-45 RFLR-AP4

Retail ...... $1259.00

2006 NRA American Rifleman Cal: 7.62 NATO “Rifle of the Year”

Each rifle comes with 2- 19 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD

• 24” Length • Phosphated 8620 steel bolt PANTHER • 416 Stainless steel bull barrel carrier, heat treated and plated. • None • Ribbed aluminum free float tube • 6 grooves, right-hand • .308 Winchester • Phosphated steel bolt, heat LR-308 (mounting optics only) • Standard Length • 1x10 twist, button rifled treated and plated per Mil (RFLR-308) • Koelbl Single-Rail Gas Block Spec.

• 16” Length • Phosphated 8620 steel bolt • 4140 Chrome-moly steel • Standard A2 front sight PANTHER carrier, heat treated and plated. AP4 Contour barrel assembly • Ribbed aluminum free float tube • 7.62 NATO • Phosphated steel bolt, heat LR-308AP4 • 6 grooves, right-hand • Detachable Rear Sight • Carbine Length treated and plated per Mil (FT-RS) (RFLR-AP4) • 1x10 twist, button rifled Spec. • 308 Panther Flash Hider

• 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt PANTHER Lite contour barrel carrier, heat treated and plated. • GlacierGuards™, oval • A1 rear sight and A1 front • Manganese phosphated • 5.56 x 45mm • Carbine Length LITE 16 • Phosphated steel bolt, heat sight post • 6 grooves, right-hand treated and plated per Mil • Aluminum delta ring (RFA2-L16) • 1x9 twist, button rifled Spec. • A1 Flash hider

• 16” Length PANTHER • 4140 Chrome-moly steel • Phosphated 8620 steel bolt AP4 contour barrel carrier, heat treated and plated. • GlacierGuards™, oval • Standard A2 front sight AP4 • Manganese phosphated • 5.56 x 45mm • Carbine Length • Phosphated steel bolt, heat assembly CARBINE • 6 grooves, right-hand treated and plated per Mil • Aluminum delta ring TOP SELLING RIFLES TOP • 1x9 twist, button rifled Spec. (RFA2-AP4A) • A2 Flash hider 6 RFA2-L16

Retail ...... $725.00

POST BAN AVAILABLE

Please Note: Additional Upgrades Cal: 5.56x45mm Located On Pages 43-45

Please Note: Additional Upgrades Located On Pages 43-45

RFA2-AP4A

Retail ...... $899.00

Cal: 5.56x45mm

Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • Thick walled, extruded from 6066-T6 aluminum • Hard coat anodized per Mil Spec and Teflon coated black • Milled from a solid billet of 6061-T6 • Snag free design, smooth side look aluminum • Standard A2 black Zytel mil spec • No dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 11.28 lbs • 43.6” • No shell deflector Teflon coated black • A2 Pistol Grip (Empty) • No forward assist • Integral trigger guard • Standard AR-15 Trigger Group • Right hand ejection • Aluminum magazine release button • Raised Picatinny rail for easy scope mounting

• A3-style Picatinny Rail Flattop

• Milled from a solid billet of 6061-T6 TOP SELLING RIFLES • Thick walled, extruded from 6066-T6 aluminum aluminum • AP4 - 6-position, telescoping, fiber • Hard coat anodized per Mil Spec and Teflon coated black • 37.75” • Hard coat anodized per Mil Spec and reinforced polymer • 8.5 lbs (Extended) • Dust cover Teflon coated black • A2 Pistol Grip (Empty) • 34.25” • Shell deflector and forward assist machined as one unit • Integral trigger guard (Collapsed) • Right hand ejection • Standard AR-15 Trigger Group • A3 Height Picatinny Rail • Aluminum magazine release button

• A1 fixed carry handle and rear sight adjustable for windage only, Forged • Pardus stock - 6-position, telescoping, • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy fiber reinforced polymer, cheek rest, • Hard coat anodized per Mil Spec and • 34.6875” • Hard coat anodized per Mil Spec and Teflon coated black curved and serrated buttplate, multiple • 6.1 lbs Teflon coated black (Extended) • Dust cover sling slots (Empty) • 31.75” • Aluminum trigger guard • Shell deflector • A2 Pistol Grip (Collapsed) • Aluminum magazine release button • Tear drop forward assist • Standard AR-15 Trigger Group • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • Detchable carry handle, rear sight adjustable for windage and elevation • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • AP4 stock - 6-position, telescoping, • Hard coat anodized per Mil Spec and • 36.375” • Hard coat anodized per Mil Spec and Teflon coated black fiber reinforced polymer • 7.0 lbs Teflon coated black (Extended) • Dust cover • A2 Pistol Grip (Empty) • 32.625” • Aluminum trigger guard • Shell deflector • Standard AR-15 Trigger Group (Collapsed) • Aluminum magazine release button • Round forward assist • Right hand ejection 7 Scope Shown: LEU-56994 Leupold Mark 4 MR/T 1.5-5x20mm, M3 Note: Scope & rings RFLR-308L not included. • 18” Lite Contour Barrel Retail ...... $1499.00 .30 CALIBER RIFLES

Please Note: Additional Upgrades Located On Pages 43-45 Cal: .308 Win.

Scope Shown: LEU-56994 Leupold Mark 4 MR/T 1.5-5x20mm, M1 Note: Scope & rings RFLR-308B not included. • 18” Bull Barrel Retail ...... $1159.00

Cal: .308 Win. Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 19 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 18” Length • 416 Stainless steel Lite • Phosphated 8620 steel bolt PANTHER Contour, Black Teflon coated carrier, heat treated and plated. • None • Carbon Fiber Free Float Tube • 6 grooves, right-hand • .308 Winchester • Phosphated steel bolt, heat LR-308L (mounting optics only) w/bipod stud, Standard Length • 1x10 twist, button rifled treated and plated per Mil (RFLR-308L) • Custom Compensator Spec. • Lightweight Gas Block

• 18” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt PANTHER carrier, heat treated and plated. • Ribbed aluminum free float tube bull barrel • None • .308 Winchester • Carbine Length LR-308B • 6 grooves, right-hand • Phosphated steel bolt, heat (mounting optics only) treated and plated per Mil • Bipod stud installed (RFLR-308B) • 1x10 twist, button rifled Spec. • Koelbl Single-Rail Gas Block

• 24” Length • Phosphated 8620 steel bolt PANTHER • 416 Stainless steel bull barrel carrier, heat treated and plated. • Ribbed aluminum free float tube • None • 6 grooves, right-hand • .308 Winchester • Standard Length LR-308 • Phosphated steel bolt, heat (mounting optics only) • 1x10 twist, button rifled treated and plated per Mil • Bipod stud installed (RFLR-308) • Koelbl Single-Rail Gas Block Spec.

• 20” Length • 416 Stainless steel bull barrel, • Phosphated 8620 steel bolt • Ribbed aluminum free float tube PANTHER carrier, heat treated and plated. fluted • None • Standard Length • .300 Remington SAUM LR-30S • 6 grooves, right-hand • Phosphated steel bolt, heat (mounting optics only) • Vented treated and plated per Mil (RFLR-30S) • 1x10 twist, button rifled Spec. • Bipod stud installed • Koelbl Single-Rail Gas Block 8 .30 CALIBER RIFLES

2005 NRA Shooting Illustrated RFLR-308 “Rifle of the Year” Retail ...... $1159.00

Scope Shown: LEU-57050

Please Note: Leupold Mark 4 MR/T Additional Upgrades 3-9x36mm, M1 IL Located On Pages 43-45 Cal: .308 Win. Note: Scope & rings not included.

RFLR-30S

Retail ...... $1259.00

Scope Shown: SC-MP8IL Valdada/IOR Please Note: Additional Upgrades 4-14x50mm Located On Pages 43-45 Note: Scope & rings not included. Cal: .300 RSAUM

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH

• A3-Style Flattop, lightweight upper, extruded from 6066-T6 aluminum • Milled from a solid billet of 6061-T6 • Hard coat anodized per Mil Spec and Teflon coated black aluminum • Skeletonized black Zytel mil spec • Dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 7.99 lbs • 39.125” • Forward assist and shell deflector Teflon coated black • G27 Tactical Pistol Grip (Empty) • Right hand ejection • Integral trigger guard • JP Adjustable Trigger • A3 height, Picatinny Rail • Aluminum magazine release button

• Thick walled, extruded from 6066-T6 aluminum • Hard coat anodized per Mil Spec and Teflon coated black • Milled from a solid billet of 6061-T6 • Snag free design, smooth side look aluminum • Standard A2 black Zytel mil spec • No dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 9.7 lbs • 37.6” • No shell deflector Teflon coated black • A2 Pistol Grip (Empty) • No forward assist • Integral trigger guard • Standard AR-15 Trigger Group • Right hand ejection • Aluminum magazine release button • Raised Picatinny rail for easy scope mounting

• Thick walled, extruded from 6066-T6 aluminum • Hard coat anodized per Mil Spec and Teflon coated black • Milled from a solid billet of 6061-T6 • Snag free design, smooth side look aluminum • Standard A2 black Zytel mil spec • No dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 11.28 lbs • 43.6” • No shell deflector Teflon coated black • A2 Pistol Grip (Empty) • No forward assist • Integral trigger guard • Standard AR-15 Trigger Group • Right hand ejection • Aluminum magazine release button • Raised Picatinny rail for easy scope mounting

• Thick walled, extruded from 6066-T6 aluminum • Hard coat anodized per Mil Spec and Teflon coated black • Milled from a solid billet of 6061-T6 • Snag free design, smooth side look aluminum • Skeletonized black Zytel mil spec • No dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 10.65 lbs • 39.6” • No shell deflector Teflon coated black • A2 Pistol Grip (Empty) • No forward assist • Integral trigger guard • Standard AR-15 Trigger Group • Right hand ejection • Aluminum magazine release button • Raised Picatinny rail for easy scope mounting 9 Scope Shown: LEU-57050 Leupold Mark 4 MR/T 3-9x36mm, M1 IL Note: Scope & rings not included. RFLR-308T

Retail ...... $1159.00 .30 CALIBER RIFLES

Please Note: Additional Upgrades Located On Pages 43-45 Cal: 7.62 NATO

Optic Shown: HDS-552 EOTech 552 Please Note: Note: Additional Upgrades Optic not Located On Pages 43-45 included. RFLR-AP4

Retail ...... $1259.00

2006 NRA American Rifleman Cal: 7.62 NATO “Rifle of the Year”

Each rifle comes with 2- 19 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt PANTHER heavy barrel carrier, heat treated and plated. • None • Ribbed aluminum free float tube • 6 grooves, right-hand • 7.62 NATO LR-308T • Phosphated steel bolt, heat (mounting optics only) • Carbine Length • 1x10 twist, button rifled treated and plated per Mil (RFLR-308T) • 308 Panther Flash Hider Spec. • Koelbl Single-Rail Gas Block

• 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt PANTHER carrier, heat treated and plated. • Standard A2 front sight AP4 Contour barrel assembly • Ribbed aluminum free float tube • 7.62 NATO LR-308AP4 • 6 grooves, right-hand • Phosphated steel bolt, heat • Detachable Rear Sight • Carbine Length treated and plated per Mil (FT-RS) (RFLR-AP4) • 1x10 twist, button rifled Spec. • 308 Panther Flash Hider

• 18” Length • Phosphated 8620 steel bolt • 416 Stainless steel bull barrel, • Primary: Optics • 4-Rail free float tube carrier, heat treated and plated. PANTHER Fluted, Teflon coated black (NOT INCLUDED) • Standard Length • 7.62 NATO • Backup: Mangonel Front LRT-SASS • 6 grooves, right-hand • Phosphated steel bolt, heat • Vented treated and plated per Mil & Rear flip-up sights • 1x10 twist, button rifled (RFLRT-SASS) Spec. (INCLUDED) • Includes 12 (wide) rail covers • 308 Panther Flash Hider

• 20” Length • Phosphated 8620 steel bolt • 4140 Chrome-moly steel • Elev. and windage PANTHER carrier, heat treated and plated. • A2 Handguard, Round heavy barrel adjustable dual aperture • 7.62 NATO rear sight • Standard Length LR-308C • 6 grooves, right-hand • Phosphated steel bolt, heat treated and plated per Mil • Standard A2 front • Aluminum Delta Ring (RFLR-C) • 1x10 twist, button rifled Spec. sight assembly • 308 Panther Flash Hider

10 Scope Shown: LEU-51850 .30 CALIBER RIFLES Leupold Mark 4 LR/T 3.5-10x40mm

RFLRT-SASS

Retail ...... $2109.00

Please Note: Harris 9-13” Swivel Series Bi-pod and bi-pod adaptor (MT-BP1) included

Note: Scope & rings not included.

Long Range Tactical Cal: 7.62 NATO Semi-Auto Sniper System

Please Note: Additional Upgrades Located On Pages 43-45

• Detachable Carrying Handle RFLR-C

Retail ...... $1099.00

NOTE: The LR-308C is the base model of the LR-TAC20. Please Note: If you wish to purchase the LR-TAC20, Additional Upgrades please order RFLR-C along with UG-3084S. Located On Pages 43-45 Each rifle comes with 2- 19 rd. Magazines, Cal: 7.62 NATO 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • Thick walled, extruded from 6066-T6 aluminum • Hard coat anodized per Mil Spec and Teflon coated black • Milled from a solid billet of 6061-T6 • Snag free design, smooth side look aluminum • Standard A2 black Zytel mil spec • No dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 8.5 lbs • 37.75” • No shell deflector Teflon coated black • A2 Pistol Grip (Empty) • No forward assist • Integral trigger guard • Standard AR-15 Trigger Group • Right hand ejection • Aluminum magazine release button • Raised Picatinny rail for easy scope mounting

• A3-style Picatinny Rail Flattop • Milled from a solid billet of 6061-T6 • Thick walled, extruded from 6066-T6 aluminum aluminum • AP4 - 6-position, telescoping, fiber • Hard coat anodized per Mil Spec and Teflon coated black • 37.75” • Hard coat anodized per Mil Spec and reinforced polymer • 8.5 lbs (Extended) • Dust cover Teflon coated black • A2 Pistol Grip (Empty) • 34.25” • Shell deflector and forward assist machined as one unit • Integral trigger guard (Collapsed) • Right hand ejection • Standard AR-15 Trigger Group • A3 Height Picatinny Rail • Aluminum magazine release button

• A3-style Picatinny Rail Flattop • Milled from a solid billet of 6061-T6 • Thick walled, extruded from 6066-T6 aluminum aluminum • Magpul Precision Rifle Stock • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and • Panther Tactical Grip • 38.875” • 11.45 lbs (Extended) • Dust cover Teflon coated black • JP Adjustable Trigger (Empty) • 35.625” • Shell deflector and forward assist machined as one unit • Integral trigger guard (4.5-5 lbs pull adjustable for over-travel (Collapsed) • Right hand ejection • Aluminum magazine release button & take-up) • A3 Height Picatinny Rail • Ambi-Selector installed

• A3-style Picatinny Rail Flattop • 308 Detachable Carrying Handle • Milled from a solid billet of 6061-T6 • Thick walled, extruded from 6066-T6 aluminum aluminum • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 11.15 lbs • 41.25” • Dust cover Teflon coated black • A2 Pistol Grip (Empty) • Shell deflector and forward assist machined as one unit • Integral trigger guard • Standard AR-15 Trigger Group • Right hand ejection • Aluminum magazine release button • A3 Height Picatinny Rail 11 Scope Shown: LEU-56994 Leupold Mark 4 MR/T 1.5-5x20mm, M3 Note: Scope & rings RFLR-260L not included.

Retail ...... $1499.00

Please Note: Additional Upgrades Located On Pages 43-45 Cal: .260 Rem.

Scope Shown: LEU-57050 Leupold Mark 4 MR/T 3-9x36mm, M1 IL Note: Scope & rings RFLR-260H not included.

Retail ...... $1199.00 .260 & .243 CALIBER

Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 19 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit Cal: .260 Rem.

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 18” Length • 416 Stainless steel Lite • Phosphated 8620 steel bolt PANTHER Contour, Black Teflon coated carrier, heat treated and plated. • None • Carbon Fiber Free Float Tube • 6 grooves, right-hand • .260 Remington • Phosphated steel bolt, heat LR-260L (mounting optics only) w/bipod stud, Standard Length • 1x7.5 twist, button rifled treated and plated per Mil (RFLR-260L) • Custom Compensator Spec. • Lightweight Gas Block

• 20” Length • 416 Stainless steel heavy • Phosphated 8620 steel bolt PANTHER barrel, Black Teflon coated carrier, heat treated and plated. • Ribbed aluminum free float tube • None • 6 grooves, right-hand • .260 Remington • Standard Length LR-260H • Phosphated steel bolt, heat (mounting optics only) • 1x7.5 twist, button rifled treated and plated per Mil • Bipod stud installed (RFLR-260H) • Panther Flash Hider Spec. • Koelbl Single-Rail Gas Block

• 24” Length • Phosphated 8620 steel bolt PANTHER • 416 Stainless steel bull barrel carrier, heat treated and plated. • Ribbed aluminum free float tube • None • 6 grooves, right-hand • .260 Remington • Standard Length LR-260 • Phosphated steel bolt, heat (mounting optics only) • 1x7.5 twist, button rifled treated and plated per Mil • Bipod stud installed (RFLR-260) • Koelbl Single-Rail Gas Block Spec.

• 20” Length • 416 Stainless steel heavy • Phosphated 8620 steel bolt PANTHER barrel, Black Teflon coated carrier, heat treated and plated. • Ribbed aluminum free float tube • None • 6 grooves, right-hand • .243 Winchester • Standard Length LR-243 • Phosphated steel bolt, heat (mounting optics only) • 1x10 twist, button rifled treated and plated per Mil • Bipod stud installed (RFLR-243) • Panther Flash Hider Spec. • Koelbl Single-Rail Gas Block 12 Scope Shown: LEU-57050 Leupold Mark 4 MR/T 3-9x36mm, M1 IL Note: Scope & rings RFLR-260 not included.

Retail ...... $1199.00

Please Note: .260 & .243 CALIBER Additional Upgrades Located On Pages 43-45 Cal: .260 Rem.

Scope Shown: LEU-57050 Leupold Mark 4 MR/T 3-9x36mm, M1 IL Note: Scope & rings RFLR-243 not included.

Retail ...... $1199.00

Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 19 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit Cal: .243 Win.

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH

• A3-Style Flattop, lightweight upper, extruded from 6066-T6 aluminum • Milled from a solid billet of 6061-T6 • Hard coat anodized per Mil Spec and Teflon coated black aluminum • Skeletonized black Zytel mil spec • Dust cover • Hard coat anodized per Mil Spec and w/trap door assembly • 7.99 lbs • 39.125” • Forward assist and shell deflector machined as one unit Teflon coated black • G27 Tactical Pistol Grip (Empty) • Right hand ejection • Integral trigger guard • JP Adjustable Trigger • A3 Height Picatinny Rail • Aluminum magazine release button

• A3-style Flattop • Milled from a solid billet of 6061-T6 • Thick walled, extruded from 6066-T6 aluminum aluminum • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 10.65 lbs • Dust cover • 39.6” Teflon coated black • A2 Pistol Grip (Empty) • Shell deflector and forward assist machined as one unit • Integral trigger guard • Right hand ejection • Standard AR-15 Trigger Group • A3 Height Picatinny Rail • Aluminum magazine release button

• A3-style Flattop • Milled from a solid billet of 6061-T6 • Thick walled, extruded from 6066-T6 aluminum aluminum • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 11.3 lbs • Dust cover • 43.6” Teflon coated black • A2 Pistol Grip (Empty) • Shell deflector and forward assist machined as one unit • Integral trigger guard • Right hand ejection • Standard AR-15 Trigger Group • A3 Height Picatinny Rail • Aluminum magazine release button

• A3-style Flattop • Milled from a solid billet of 6061-T6 • Thick walled, extruded from 6066-T6 aluminum aluminum • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 10.65 lbs • Dust cover • 39.6” Teflon coated black • A2 Pistol Grip (Empty) • Shell deflector and forward assist machined as one unit • Integral trigger guard • Right hand ejection • Standard AR-15 Trigger Group • A3 Height Picatinny Rail • Aluminum magazine release button 13 Optic Shown: ACOG-01 Trijicon 4x32 Note: Optic not included. RFA2-762-16

Retail ...... $849.00

Please Note: Additional Upgrades Located On Pages 43-45 Cal: 7.62x39mm

RFA2-762

Retail ...... $859.00

Post Ban Available

Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 10 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit Cal: 7.62x39mm

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 16” Length 16” • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • Dual aperture rear sight PANTHER heavy barrel carrier, heat treated and plated. adjustable for windage and • GlacierGuards™, oval • Manganese phosphated • 7.62 x 39mm • Phosphated steel bolt, heat elevation. Mil Spec front • Carbine Length 7.62x39 • 6 grooves, right-hand treated and plated per Mil sight post, adjustable for • Aluminum delta ring • 1x10 twist, button rifled Spec. elevation (RFA2-762-16) • A2 Flash hider

• 20” Length 20” • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • Dual aperture rear sight 7.62 x 39mm CALIBER PANTHER heavy barrel carrier, heat treated and plated. adjustable for windage and • A2 Handguards, round • Manganese phosphated • 7.62 x 39mm • Phosphated steel bolt, heat elevation. Mil Spec front • Standard Length 7.62x39 • 6 grooves, right-hand treated and plated per Mil sight post, adjustable for • Aluminum delta ring • 1x10 twist, button rifled Spec. elevation (RFA2-762) • A2 Flash hider

• 16” Length 16” • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • Elev. and windage PANTHER AP4 style contour barrel carrier, heat treated and plated. adjustable dual aperture • GlacierGuards™, oval • Manganese phosphated • 6.8 x 43mm Rem. SPC • Phosphated steel bolt, heat rear sight • Carbine Length 6.8mm SPC • 6 grooves, right-hand treated and plated per Mil • Mil Spec front sight post, • Aluminum delta ring • 1x10 twist, button rifled Spec. elev. adjustable (RFA2-AP468) • A2 Flash hider

20” • 20” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • Elev. and windage • A2 Handguards, round heavy barrel carrier, heat treated and plated. adjustable dual aperture PANTHER • 6.8 x 43mm Rem. SPC rear sight • Standard Length • 6 grooves, right-hand • Phosphated steel bolt, heat 6.8mm SPC treated and plated per Mil • Mil Spec front sight post, • Aluminum delta ring • 1x11 twist, button rifled Spec. elev. adjustable (RFA3-68) • A2 Flash hider 14 RFA2-AP468

Retail ...... $989.00

Please Note: Additional Upgrades Cal: 6.8mm Rem. SPC Located On Pages 43-45

RFA3-68

Retail ...... $999.00 6.8mm SPC CALIBER Cal: 6.8mm Rem. SPC Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 25 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • A2 fixed carry handle, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 7 lbs • Dust cover Teflon coated black • 34.6875” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Forward assist • Aluminum magazine release button • Right hand ejection

• A2 fixed carry handle, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 9 lbs • Dust cover Teflon coated black • 38.4375” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Forward assist • Aluminum magazine release button • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • Detchable carry handle, rear sight adjustable for windage and elevation • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • AP4 - 6-position, telescoping, fiber • Hard coat anodized per Mil Spec and • 36.375” • Hard coat anodized per Mil Spec and Teflon coated black reinforced polymer Teflon coated black • 7 lbs (Extended) • Dust cover • A2 Pistol Grip (Empty) • 32.625” • Aluminum trigger guard • Shell deflector • Standard AR-15 Trigger Group (Collapsed) • Forward assist • Aluminum magazine release button • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • Detchable carry handle, rear sight adjustable for windage and elevation • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and • Hard coat anodized per Mil Spec and Teflon coated black w/trap door assembly • 9 lbs Teflon coated black • 38.4375” • Dust cover • A2 Pistol Grip (Empty) • Aluminum trigger guard • Shell deflector • Standard AR-15 Trigger Group • Forward assist • Aluminum magazine release button • Right hand ejection 15 Optic Shown: ACOG-11 Trijicon ACOG 3.5x35

Note: Optic not included. RFA2-B16

Retail ...... $899.00

.223 REMINGTON Please Note: Additional Upgrades Located On Pages 43-45

Optic Shown: AM-11408 Aimpoint COMPM3 Note: RF3R-P Optic & mount not included.

Retail ...... $1679.00

Also Available in Black!

Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD

• 16” Length PANTHER • Phosphated 8620 steel bolt • 416 Stainless steel carrier, heat treated and plated. • Aluminum free float tube Bull barrel • None SWEET • .223 Remington • Carbine Length • 6 grooves, right-hand • Phosphated steel bolt, heat (mounting optics only) treated and plated per Mil • Bipod stud installed SIXTEEN • 1x9 twist, button rifled Spec. (RFA2-B16) • Koelbl single rail gas block

• 16” Length • 416 Stainless steel PANTHER Bull barrel • Heat treated per Mil Spec and • None • 4-Rail free float tube • 6 grooves, right-hand • .223 Remington Titanium Nitride (TiN) plated PARDUS (mounting optics only) • Carbine Length • 1x9 twist, button rifled 8620 steel bolt & bolt carrier. (RF3R-P) • Integrated compensator • Koelbl single rail gas block

• 20” Length PANTHER • Phosphated 8620 steel bolt • 416 Stainless steel carrier, heat treated and plated. • Aluminum free float tube Bull barrel • None BULL • .223 Remington • Standard Length • 6 grooves, right-hand • Phosphated steel bolt, heat (mounting optics only) treated and plated per Mil • Bipod stud installed TWENTY • 1x9 twist, button rifled Spec. (RFA2-BULL20-A3) • Koelbl single rail gas block

• 20” Length • 416 Stainless steel • Phosphated 8620 steel bolt • White coated aluminum ARCTIC Bull barrel carrier, heat treated and plated. free float tube • None • Fluted and black Teflon coated • .223 Remington • Standard Length PANTHER • Phosphated steel bolt, heat (mounting optics only) • 6 grooves, right-hand treated and plated per Mil • Vented (RFA2-AP) • 1x9 twist, button rifled Spec. • Bipod stud installed • Koelbl single rail gas block 16 Scope Shown: LEU-57055 Leupold Mark 4 MR/T 3-9x36mm, M3 IL

Note: .223 REMINGTON Scope & rings not included. RFA2-BULL20-A3

Retail ...... $920.00

Please Note: Additional Upgrades Located On Pages 43-45

Scope Shown: TA-01NSN Trijicon ACOG 4x32

Note: RFA2-AP Optic & mount not included.

Retail ...... $1099.00

Please Note: Special Features: Additional Upgrades White coat finish on receivers and handguards and black Teflon finish on barrel provides dispersed camo pattern Located On Pages 43-45 Each rifle comes with 2- 30 rd. Magazines, for winter varmint hunting. 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 7.75 lbs • Dust cover Teflon coated black • 34.6875” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection

• Pardus stock - 6-position, telescoping, • 3-Rail, Extruded • Forged 7076-T6 aircraft aluminum alloy fiber reinforced polymer, curved and • 6066-T6 aluminum alloy • Hard coat anodized per Mil Spec and serrated buttplate, 5 sling slots • 8.1 lbs • Left and right side rails set at 22.5 degrees from the horizontal coated tan • 36.75” • A2 Pistol Grip (Empty) • Hard coat anodized per Mil Spec and coated tan • Aluminum trigger guard • Standard AR-15 Trigger Group • Right hand ejection • Aluminum magazine release button • Titanium nitride (TiN) plated trigger

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 9.5 lbs • Dust cover Teflon coated black • 37.4375” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and coated white • Hard coat anodized per Mil Spec and w/trap door assembly • 9 lbs • Dust cover coated white • 38.4375” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection 17 Scope Shown: LEU-54560 Leupold Mark 4 LR/T 4.5-14x50mm, M1 Note: Scope and rings RFA2-B24 not included.

Retail ...... $949.00

.223 REMINGTON Please Note: Additional Upgrades Located On Pages 43-45

Scope Shown: LEU-57055 Leupold Mark 4 MR/T 3-9x36mm, M3 IL Note: Scope & rings RFA2-24SP not included.

Retail ...... $1189.00

Please Note: Additional Upgrades Located On Pages 43-45

Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD

• 24” Length • Phosphated 8620 steel bolt • 416 Stainless steel PANTHER carrier, heat treated and plated. • Aluminum free float tube Bull barrel • None • .223 Remington • Standard Length • 6 grooves, right-hand • Phosphated steel bolt, heat (mounting optics only) BULL 24 treated and plated per Mil • Bipod stud installed • 1x9 twist, button rifled (RFA2-B24) Spec. • Koelbl single rail gas block

• 24” Length PANTHER • 416 Stainless steel • Phosphated 8620 steel bolt • Aluminum free float tube Bull barrel carrier, heat treated and plated. • None • Vented BULL 24 • Fluted • .223 Remington • Phosphated steel bolt, heat (mounting optics only) • Standard Length SPECIAL • 6 grooves, right-hand treated and plated per Mil • 1x9 twist, button rifled Spec. • Bipod stud installed (RFA2-24SP) • Koelbl single rail gas block

• 24” Length • 416 High polish stainless steel • Phosphated 8620 steel bolt • Hot Rod Handguard PANTHER Bull barrel carrier, heat treated and plated. • Standard Length • Fluted, black Teflon in flutes • .223 Remington • Phosphated steel bolt, heat • None • Bipod stud installed RACE GUN • 6 grooves, right-hand treated and plated per Mil (RF-RG) • 1x8 twist, button rifled Spec. • Koelbl single rail gas block

• National Match dual • 20” Length .030/.040 aperture rear • Phosphated 8620 steel bolt • 416 Stainless steel sight adjustable for 1/4 min. PANTHER carrier, heat treated and plated. heavy barrel windage and 1/2 min. • DCM Free Float Handguard • .223 Remington • Phosphated steel bolt, heat System • 6 grooves, right-hand elevation. DCM treated and plated per Mil • Standard Length • .050 National Match front (RFA2-DCM) • 1x8 twist, button rifled Spec. • A2 Flash hider sight pos, w/4 set screws for front sight adjustment. 18 .223 REMINGTON RF-RG

Retail ...... $1499.00

Please Note: Additional Upgrades Located On Pages 43-45

RFA2-DCM

Retail ...... $1099.00

POST BAN AVAILABLE

Options: • .052/.020 or .046/.020 Aperture

Please Note: DCM Accessories Include: Additional Upgrades • .052/.020 or .046/.020 Aperture (Pg. 65) Located On Pages 43-45 • National Match Rear Sight (Pg. 66) • Custom Formed Lead Weight (Pg. 62) • DCM Front Sight Posts (Pg. 68) Each rifle comes with 2- 30 rd. Magazines, • A2 Stock Weight Wedge (Pg. 83) 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 9.8 lbs • Dust cover Teflon coated black • 42.4375” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel buttstock • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/adjustable buttplate • 10.25 lbs • Dust cover Teflon coated black • 43.0625” • Panther Tactical Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection

• Lo-Pro Flattop, Extruded • Forged 7076-T6 aircraft aluminum alloy • PMT Adjustable Stock System • 6066-T6 aluminum alloy • Hard coat anodized per Mil Spec and (BS-PMT) • 16 lbs • Hard coat anodized per Mil Spec and Teflon coated silver Teflon coated black • 40” • Panther Tactical Pistol Grip (Empty) • Right hand ejection • Aluminum trigger guard • JP Adjustable Trigger Group • Badger Ordnance Tac Latch is included on the charge handle • Aluminum magazine release button

• A2 fixed carry handle and NM rear sight adjustable for windage and elevation, Forged • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and • Hard coat anodized per Mil Spec and Teflon coated black w/trap door assembly • 9 lbs Teflon coated black • 38.4375” • Dust cover • A2 Pistol Grip (Empty) • Aluminum trigger guard • Shell deflector • Two-Stage Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection 19 RFA2-C

Retail ...... $799.00

POST BAN AVAILABLE

Please Note: Additional Upgrades Located On Pages 43-45

RFA1-L20

Retail ...... $725.00 5.56 x 45mm CALIBER

POST BAN AVAILABLE Please Note: Additional Upgrades Located On Pages 43-45

Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 20” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • Dual aperture rear sight PANTHER heavy barrel carrier, heat treated and plated. adjustable for windage and • A2 Handguards, round CLASSIC • Manganese phosphated • 5.56 x 45mm • Phosphated steel bolt, heat elevation. Mil Spec front • Standard Length • 6 grooves, right-hand treated and plated per Mil sight post, adjustable for • Aluminum delta ring (RFA2-C) • 1x9 twist, button rifled Spec. elevation • A2 Flash hider

• 20” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt PANTHER Lite contour barrel carrier, heat treated and plated. • A2 Handguards, round • A1 rear sight and A1 front • Manganese phosphated • 5.56 x 45mm • Standard Length LITE 20 • Phosphated steel bolt, heat sight post • 6 grooves, right-hand treated and plated per Mil • Aluminum delta ring (RFA1-L20) • 1x9 twist, button rifled Spec. • A2 Flash hider

• 20” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • Dual aperture rear sight PANTHER heavy barrel carrier, heat treated and plated. adjustable for windage and • A2 Handguards, round SOUTHPAW • Manganese phosphated • 5.56 x 45mm • Phosphated steel bolt, heat elevation. Mil Spec front • Standard Length • 6 grooves, right-hand treated and plated per Mil sight post, adjustable for • Aluminum delta ring (RFA2-SP) • 1x9 twist, button rifled Spec. elevation • A2 Flash hider 20 1st Production Left-Handed Rifle Since 1992!

RFA2-SP

Retail ...... $899.00

POST BAN AVAILABLE

Please Note: Additional Upgrades Located On Pages 43-45 LEFT-HANDED!

Each rifle comes with 2- 30 rd. Magazines, 5.56 x 45mm CALIBER 1- Nylon Web Sling and 1- Cleaning Kit

BA-A2AS-SP

Retail ...... $565.00

BARREL CHAMBER TWIST UPPER RECEIVER HANDGUARD SIGHTS • 20” Length • A2 fixed carry handle, • A2 Handguard, Round • Elev. and windage • 4140 Chrome-moly steel • Forged 7075-T6 aluminum adjustable rear sight • 5.56x45mm • 1x9 twist • Standard length BA-A2AS-SP heavy barrel, phosphated • Black Teflon coated • Standard A2 front • Aluminum delta ring • A2 Flash hider • Left-Hand Ejection sight assembly

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • A2 fixed carry handle, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 9 lbs • Dust cover Teflon coated black • 38.4375” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection

• A1 fixed carry handle and rear sight adjustable for windage only, Forged • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and • Hard coat anodized per Mil Spec and Teflon coated black w/trap door assembly • 7.35 lbs Teflon coated black • 38.4375” • Dust cover • A2 Pistol Grip (Empty) • Aluminum trigger guard • Shell deflector • Standard AR-15 Trigger Group • Tear drop forward assist • Aluminum magazine release button • Right hand ejection

• A2 fixed carry handle, modified for left hand ejection, Forged • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and • Hard coat anodized per Mil Spec and Teflon coated black w/trap door assembly • 9 lbs Teflon coated black • 38.4375” • Shell deflector on right side only • A2 Pistol Grip (Empty) • Aluminum trigger guard • Round forward assist • Standard AR-15 Trigger Group • Aluminum magazine release button • Left hand ejection

21 Optic Shown: TA-01NSN Each rifle comes with 2- 30 rd. Magazines, Trijicon ACOG 4x32 1- Nylon Web Sling and 1- Cleaning Kit Note: Optic & mount not included.

RFA3-SDMR

Retail ...... $1399.00

Please Note: Squad Designated Additional Upgrades Located On Pages 43-45 Marksmanship Rifle

Please Note: Harris 9-13” Swivel Series Bi-pod and bi-pod adaptor (MT-BP1) included 5.56 X 45mm RIFLES RFA3-SASS

Scope Shown: LEU-54560 Retail ...... $1599.00 Semi-Auto Leupold Mark 4 LR/T Sniper System 4.5-14x50mm, M1 Note: Scope & rings not included.

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 20” Length • 416 Stainless steel • Phosphated 8620 steel bolt PANTHER heavy barrel carrier, heat treated and plated. • National Match front sight • 4-Rail free float tube SDM-R • 12 custom groove flutes • 5.56 x 45mm • Phosphated steel bolt, heat post with 4 set screws for • Standard Length • 6 grooves, right-hand treated and plated per Mil front sight adjustment • Includes six (long) rail covers (RFA3-SDMR) • 1x8 twist, button rifled Spec. • A2 Flash Hider

• 18” Length PANTHER • 416 Stainless steel bull barrel • Phosphated 8620 steel bolt • Primary: Optics carrier, heat treated and plated. • 4-Rail free float tube • Fluted & Teflon coated black (NOT INCLUDED) • Vented MINI • 5.56 x 45mm • Phosphated steel bolt, heat • Backup: Mangonel Front • 6 grooves, right-hand • Standard Length SASS treated and plated per Mil & Rear flip-up sights • Includes six (long) rail covers • 1x8 twist, button rifled Spec. (INCLUDED) (RFA3-SASS) • Panther Flash Hider

• 18” Length • 416 Stainless steel • Phosphated 8620 steel bolt • Midwest Industries Flip-up PANTHER heavy barrel carrier, heat treated and plated. rear sight, windage • 4-Rail free float tube MARK 12 • Teflon coated black • 5.56 x 45mm • Phosphated steel bolt, heat adjustable only. • Standard Length • 6 grooves, right-hand treated and plated per Mil • Yankee Hill Machine Flip-up • Includes six (long) rail covers (RFA3-M12) • 1x8 twist, button rifled Spec. front sight w/gas block • Panther Flash Hider

• 16” Length THE • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • EOTech HDS Model 512 • SureFire M73 Quad Rail heavy barrel carrier, heat treated and plated. (HDS-512) • Standard A2 front sight (FF-M73) AGENCY • Manganese phosphated • 5.56 x 45mm • Phosphated steel bolt, heat assembly • SureFire M951XM Flashlight • 6 grooves, right-hand treated and plated per Mil RIFLE • Mangonel Flip-up Rear (SF-M951XM07) • 1x9 twist, button rifled Spec. Sight (RS-MG) (RFA2-ACAR) • A2 Flash Hider 22 Scope Shown: LEU-51850 Leupold Mark 4 LR/T 3.5-10x40mm Note: Scope & rings not included. RFA3-M12

Retail ...... $1599.00

Please Note: Additional Upgrades Located On Pages 43-45 5.56 X 45mm RIFLES

RFA2-ACAR

Retail ...... $1999.00

Optic Shown: HDS-512 EOTech HDS 512 Light Shown: SF-M951XM07 SureFire M951XM Each rifle comes with 2- 30 rd. Magazines, Note: 1- Nylon Web Sling and 1- Cleaning Kit Optic & Light included!

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 8.85 lbs • Dust cover Teflon coated black • 39.5” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Two-Stage Match Grade Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection

A3 Picatinny Rail Flattop, “T” Marked, Forged • • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • Hard coat anodized per Mil Spec and • Hard coat anodized per Mil Spec and Teflon coated black • Magpul PRS Stock • 38.875” Teflon coated black • 10.25 lbs (Extended) • Dust cover • Panther Tactical Grip • Aluminum trigger guard (Empty) • 35.625” • Shell deflector • JP Adjustable Trigger • Aluminum magazine release button (Collapsed) • Round forward assist • Right hand ejection • Ambi-Selector installed (LR-08B)

A3 Picatinny Rail Flattop, “T” Marked, Forged • • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • Hard coat anodized per Mil Spec and • LMT SOPMOD carbine 5-position • Hard coat anodized per Mil Spec and Teflon coated black • 38.625” Teflon coated black collapsible stock • 8.75 lbs • Dust cover (Extended) • Magpul Winter trigger guard • G27 Tactical Pistol Grip • 35.5” • Shell deflector (Empty) • Aluminum magazine release button (Collapsed) • Round forward assist • Two-Stage Match Grade Trigger Group • Right hand ejection • Ambi-Selector installed (LR-08B)

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Pardus stock - 6-position, telescoping, • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and fiber reinforced polymer, cheek rest, • 36.375” • Dust cover Teflon coated black curved and serrated buttplate, multiple • 7.06 lbs (Extended) • Shell deflector • Aluminum trigger guard sling slots (Empty) • 32.625” • Round forward assist • Aluminum magazine release button • ERGO Sure Grip (PG-AMS) (Collapsed) • Right hand ejection • Ambi-Selector installed (LR-08B) • Two-Stage Trigger Group (UG-TS) • Tactical Charging Handle Latch (UG-73) 23 RFA2-L16

Retail ...... $725.00

POST BAN AVAILABLE

Please Note: Additional Upgrades Located On Pages 43-45

RFA2-16

Retail ...... $799.00

POST BAN AVAILABLE 5.56 x 45mm CALIBER

Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt PANTHER Lite contour barrel carrier, heat treated and plated. • GlacierGuards™, oval • A1 rear sight and A1 front • Manganese phosphated • 5.56 x 45mm • Carbine Length LITE 16 • Phosphated steel bolt, heat sight post • 6 grooves, right-hand treated and plated per Mil • Aluminum delta ring (RFA2-L16) • 1x9 twist, button rifled Spec. • A2 Flash hider

• 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt Rear sight adjustable for PANTHER Heavy barrel carrier, heat treated and plated. • • GlacierGuards™, oval windage and elevation. • Manganese phosphated • 5.56 x 45mm • Carbine Length CLASSIC 16 • Phosphated steel bolt, heat Elevation adjustable front • 6 grooves, right-hand treated and plated per Mil sight post. • Aluminum delta ring (RFA2-16) • 1x9 twist, button rifled Spec. • A2 Flash hider

• 16” Length PANTHER • 4140 Chrome-moly steel • Phosphated 8620 steel bolt Bull barrel carrier, heat treated and plated. • GlacierGuards™, oval • None LO-PRO • Manganese phosphated • 5.56 x 45mm • Phosphated steel bolt, heat • Carbine Length (mounting optics only) CLASSIC • 6 grooves, right-hand treated and plated per Mil • Aluminum delta ring • 1x9 twist, button rifled Spec. (RFA2-PCAR) • Target crowned muzzle

• 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt Rear sight adjustable for PANTHER Heavy barrel carrier, heat treated and plated. • • A2 Handguards, round windage and elevation. • Manganese phosphated • 5.56 x 45mm • Standard Length A2 TACTICAL • Phosphated steel bolt, heat Elevation adjustable front • 6 grooves, right-hand treated and plated per Mil sight post. • Aluminum delta ring (RFA2-C16L) • 1x9 twist, button rifled Spec. • A2 Flash hider 24 Optic Shown: ACOG-11 Trijicon ACOG 3.5x35

Note: Optic not included.

RFA2-LPC

Retail ...... $725.00

Please Note: Additional Upgrades Located On Pages 43-45 5.56 x 45mm CALIBER

RFA2-C16L

Retail ...... $799.00

POST BAN AVAILABLE

Please Note: Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • A1 fixed carry handle and rear sight adjustable for windage only, Forged • Forged 7076-T6 aircraft aluminum alloy • Pardus stock - 6-position, telescoping, • 7076-T6 aircraft aluminum alloy fiber reinforced polymer, cheek rest, • Hard coat anodized per Mil Spec and • 34.6875” • Hard coat anodized per Mil Spec and Teflon coated black curved and serrated buttplate, multiple Teflon coated black • 5.7 lbs (Extended) • Dust cover sling slots (Empty) • 31.75” • Aluminum trigger guard • Shell deflector • A2 Pistol Grip (Collapsed) • Tear drop forward assist • Aluminum magazine release button • Standard AR-15 Trigger Group • Right hand ejection

• A2 fixed carry handle, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 7.06 lbs • Dust cover Teflon coated black • 34.6875” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection

• Forged 7076-T6 aircraft aluminum alloy • Flattop Lo-Pro, Extruded • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and • 6066-T6 aircraft aluminum alloy w/trap door assembly • 7.75 lbs Teflon coated black • 34.5” • Hard coat anodized per Mil Spec and Teflon coated black • A2 Pistol Grip (Empty) • Aluminum trigger guard • Right hand ejection • Standard AR-15 Trigger Group • Aluminum magazine release button

• A2 fixed carry handle, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 9.75 lbs • Dust cover Teflon coated black • 34.6875” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection 25 RFA2-PCAR

Retail ...... $799.00

Please Note: Additional Upgrades “The Original” Located On Pages 43-45 11 1/2’” Barrel w/ 5 1/2” Flash Hider

RFA2-PCAR-16

Retail ...... $799.00 5.56 x 45mm CALIBER

“A2 Carbine” Please Note: 16’” Barrel w/ A2 Flash Hider Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD • 11 1/2” Length, Chrome-lined heavy barrel w/5 1/2” Flash • Phosphated 8620 steel bolt Rear sight adjustable for PANTHER hider (permanently attached) carrier, heat treated and plated. • • GlacierGuards™, oval (16” Overall Barrel Length) windage and elevation. • 5.56 x 45mm • Carbine Length CARBINE • 4140 Chrome-moly steel • Phosphated steel bolt, heat Elevation adjustable front • Manganese phosphated treated and plated per Mil sight post. • Aluminum delta ring (RFA2-PCAR) • 6 grooves, right-hand Spec. • 1x9 twist, button rifled

• 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt Rear sight adjustable for PANTHER Heavy barrel carrier, heat treated and plated. • • GlacierGuards™, oval windage and elevation. • Manganese phosphated • 5.56 x 45mm • Carbine Length CARBINE A2 • Phosphated steel bolt, heat Elevation adjustable front • 6 grooves, right-hand treated and plated per Mil sight post. • Aluminum delta ring (RFA2-PCAR-16) • 1x9 twist, button rifled Spec. • A2 Flash hider

• 16” Length PANTHER • 4140 Chrome-moly steel • Elev. and windage AP4 contour barrel • Phosphated 8620 steel bolt adjustable dual aperture • Manganese phosphated carrier, heat treated and plated. rear sight • GlacierGuards™, oval AP4 CARBINE • 5.56 x 45mm • Phosphated steel bolt, heat • Carbine Length • 6 grooves, right-hand • Mil Spec front sight post, POST BAN treated and plated per Mil elev. adjustable • Aluminum delta ring • 1x9 twist, button rifled Spec. (RFA2-AP4PMC) • Miculek Compensator • No bayonet lug (permanantly attached)

• 16” Length • 4140 Chrome-moly steel • Phosphated 8620 steel bolt • Elev. and windage PANTHER AP4 contour barrel carrier, heat treated and plated. adjustable dual aperture • GlacierGuards™, oval AP4 CARBINE • Manganese phosphated • 5.56 x 45mm • Phosphated steel bolt, heat rear sight • Carbine Length • 6 grooves, right-hand treated and plated per Mil • Mil Spec front sight post, • Aluminum delta ring (RFA2-AP4A) • 1x9 twist, button rifled Spec. elev. adjustable • A2 Flash hider 26 RFA2-AP4PMC

Retail ...... $939.00

POST BAN LEGAL!

Post ban rifles comes with 2- 10 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit Please Note: Additional Upgrades Located On Pages 43-45 5.56 x 45mm CALIBER

RFA2-AP4A

Retail ...... $899.00

Please Note: Additional Upgrades Located On Pages 43-45 Rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • A2 fixed carry handle and rear sight adjustable for windage and elevation, Forged • Pardus stock - 6-position, telescoping, • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy fiber reinforced polymer, cheek rest, • Hard coat anodized per Mil Spec and • 35.5” • Hard coat anodized per Mil Spec and Teflon coated black curved and serrated buttplate, multiple • 6.9 lbs Teflon coated black (Extended) • Dust cover sling slots (Empty) • 31.75” • Aluminum trigger guard • Shell deflector • A2 Pistol Grip (Collapsed) • Aluminum magazine release button • Round forward assist • Standard AR-15 Trigger Group • Right hand ejection • A2 fixed carry handle and rear sight adjustable for windage and elevation, Forged • Pardus stock - 6-position, telescoping, • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy fiber reinforced polymer, cheek rest, • Hard coat anodized per Mil Spec and • 36.375” • Hard coat anodized per Mil Spec and Teflon coated black curved and serrated buttplate, multiple • 7.06 lbs Teflon coated black (Extended) • Dust cover sling slots (Empty) • 32.625” • Aluminum trigger guard • Shell deflector • A2 Pistol Grip (Collapsed) • Aluminum magazine release button • Round forward assist • Standard AR-15 Trigger Group • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • Detchable carry handle, rear sight adjustable for windage and elevation • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • AP4 stock made of fiber reinforced • Hard coat anodized per Mil Spec and • Hard coat anodized per Mil Spec and Teflon coated black polymer - Locked in open position • 7.25 lbs Teflon coated black • 34.6875” • Dust cover • A2 Pistol Grip (Empty) • Aluminum trigger guard • Shell deflector • Standard AR-15 Trigger Group • Aluminum magazine release button • Round forward assist • Right hand ejection

Pre Ban Acceptable! Threaded barrel and bayonet lug are legal on these weapons. RFA2-PUP Pump Actions come with 2- 30 rd. Magazines, Retail ...... $1699.00 1- Nylon Web Sling and 1- Cleaning Kit

RFA2-PU

Retail ...... $1699.00

RFA2-V

Retail ...... $819.00

• No magazine well • Single shot reload 5.56 x 45mm CALIBER • Patent # 5,452,534

POST BAN LEGAL! RFA2-V comes with 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD

PANTHER • 20” Length • Phosphated 8620 steel bolt carrier, heat treated and plated. • Dual aperture rear sight • 4140 Steel heavy barrel adjustable for windage and • Phosphated steel bolt, heat • Aluminum pump action PUMP ACTION • 6 grooves, right-hand • 5.56 x 45mm elevation. treated and plated per Mil • Elevation adjustable Mil • Knurled RIFLE • 1x9 twist, button rifled Spec. Spec front sight post. (RFA2-PU) • A2 Flash hider & bayonet lug • Pump Action rotating bolt

PANTHER • 10.5” Length • Phosphated 8620 steel bolt carrier, heat treated and plated. • Dual aperture rear sight • 4140 Steel heavy barrel adjustable for windage and • Phosphated steel bolt, heat • Aluminum pump action PUMP ACTION • 6 grooves, right-hand • 5.56 x 45mm elevation. treated and plated per Mil • Elevation adjustable Mil • Knurled PISTOL • 1x9 twist, button rifled Spec. Spec front sight post. (RFA2-PUP) • A2 Flash hider & bayonet lug • Pump Action rotating bolt

DPMS • 20” Length • Phosphated 8620 steel bolt • 4140 Chrome-moly steel carrier, heat treated and plated. • Dual aperture rear sight adjustable for windage and • A2 Handguards, Mil Spec Heavy barrel • Phosphated steel bolt, heat SINGLE SHOT • 5.56 x 45mm elevation. • Standard Length • Manganese phosphated treated and plated per Mil • Elevation adjustable Mil AR RIFLE Spec. • Aluminum delta ring • 6 grooves, right-hand Spec front sight post. (RFA2-V) • 1x9 twist, button rifled • Manual rotating bolt

• 24” Length • Phosphated 8620 steel bolt PANTHER • 416 Stainless steel Bull barrel carrier, heat treated and plated. • Aluminum free float tube • None • Fluted • .204 Ruger • Standard Length LR-204 • Phosphated steel bolt, heat (mounting optics only) • 6 grooves, right-hand treated and plated per Mil • Bipod stud installed (RFA3-204) • 1x12 twist, button rifled Spec.

28 Scope Shown: LEU-57050

Leupold Mark 4 MR/T .204 RUGER CALIBER 3-9x36mm, M1 IL Note: Scope & rings RFA3-204 not included.

Retail ...... $999.00

Please Note: Additional Upgrades Cal: .204 Ruger Located On Pages 43-45

Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

204-BA-24

Retail ...... $854.00

BARREL CHAMBER TWIST UPPER RECEIVER HANDGUARD SIGHTS • A3 Flattop, Forged • 24” Length • Ribbed aluminum free float tube • 7076-T6 aircraft aluminum • None • 416 Stainless steel Bull barrel • .204 Ruger • 1x12 twist • Standard length 204-BA-24 alloy (mounting optics only) • Bipod stud installed • Fluted • Black Teflon coated

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • A2 fixed carry handle and rear sight adjustable for windage and elevation, Forged • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • 7076-T6 aircraft aluminum alloy • Hard coat anodized per Mil Spec and w/trap door assembly or aluminum • Hard coat anodized per Mil Spec and Teflon coated black • 8.5 lbs Teflon coated black telescoping carbine stock assembly • 39.5” • Dust cover (Empty) • Aluminum trigger guard • A2 Pistol Grip • Shell deflector • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection • A2 fixed carry handle and rear sight adjustable for windage and elevation, Forged • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • Hard coat anodized per Mil Spec and • Hard coat anodized per Mil Spec and Teflon coated black • A2 Pistol Grip • 5 lbs Teflon coated black • 19” • Dust cover • Standard AR-15 Trigger Group (Empty) • Aluminum trigger guard • Shell deflector • Round forward assist • Aluminum magazine release button • Right hand ejection

• A2 fixed carry handle and rear sight adjustable for windage and elevation, Forged • Single Shot - No Magazine Well • 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Forged 7076-T6 aircraft aluminum alloy • Hard coat anodized per Mil Spec and Teflon coated black w/trap door assembly • 9 lbs • 38.25” • Dust cover • Hard coat anodized per Mil Spec and • A2 Pistol Grip (Empty) Teflon coated black • Shell deflector • Standard AR-15 Trigger Group • Round forward assist • Aluminum trigger guard • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • 7076-T6 aircraft aluminum alloy • Forged 7076-T6 aircraft aluminum alloy • Standard A2 black Zytel mil spec • Hard coat anodized per Mil Spec and Teflon coated black • Hard coat anodized per Mil Spec and w/trap door assembly • 10.25 lbs • Dust cover Teflon coated black • 42.4375” • A2 Pistol Grip (Empty) • Shell deflector • Aluminum trigger guard • Standard AR-15 Trigger Group • Round forward assist • Aluminum magazine release button • Right hand ejection 29 RFA2-KIT

Retail ...... N/A LAW ENFORCEMENT 7” BARREL Please Note: NFA RULES APPLY! Additional Upgrades Cannot be sold to civilians! Located On Pages 43-45 Agency/Department Purchase Only or export license required.

RFA2-PCAR-11

Retail ...... N/A

NFA RULES APPLY! Cannot be sold to civilians! Agency/Department Purchase Only or export license required. Please Note: 11 1/2” BARREL Additional Upgrades Located On Pages 43-45 Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

BARREL CHAMBER BOLT CARRIER SIGHTS HANDGUARD

• 7” Length, Chrome-lined 7” • Phosphated 8620 steel bolt heavy barrel Rear sight adjustable for carrier, heat treated and plated. • PANTHER • 4140 Chrome-moly steel windage and elevation. • Aluminum free float tube • 5.56 x 45mm • Phosphated steel bolt, heat • 6 grooves, right-hand Elevation adjustable front • Kitty Kat Length KITTY-KAT treated and plated per Mil sight post. • 1x9 twist, button rifled Spec. (RFA2-KIT) • A2 Flash hider

• 11 1/2” Length, Chrome-lined 11 1/2” heavy barrel • Phosphated 8620 steel bolt Rear sight adjustable for • 4140 Chrome-moly steel carrier, heat treated and plated. • • GlacierGuards™, oval windage and elevation. PANTHER • Manganese phosphated • 5.56 x 45mm • Carbine Length • Phosphated steel bolt, heat Elevation adjustable front CARBINE A2 • 6 grooves, right-hand treated and plated per Mil sight post. • Aluminum delta ring • 1x9 twist, button rifled Spec. (RFA2-PCAR-11) • A2 Flash hider

• 11 1/2” Length, Chrome-lined heavy barrel 11 1/2” • Phosphated 8620 steel bolt • Elev. and windage • 4140 Chrome-moly steel carrier, heat treated and plated. adjustable dual aperture • GlacierGuards™, oval PANTHER • Manganese phosphated • 5.56 x 45mm • Phosphated steel bolt, heat rear sight • Carbine Length CARBINE A3 • 6 grooves, right-hand treated and plated per Mil • Mil Spec front sight post, • Aluminum delta ring • 1x9 twist, button rifled Spec. elev. adjustable (RFA3-11) • A2 Flash hider

• 14 1/2” Length, Chrome-lined 14 1/2” AP4 style contour barrel • Phosphated 8620 steel bolt • Elev. and windage PANTHER • 4140 Chrome-moly steel carrier, heat treated and plated. adjustable dual aperture • GlacierGuards™, oval • Manganese phosphated • 5.56 x 45mm • Phosphated steel bolt, heat rear sight • Carbine Length AP4 CARBINE • 6 grooves, right-hand treated and plated per Mil • Mil Spec front sight post, • Aluminum delta ring (RFA2-AP4) • 1x9 twist, button rifled Spec. elev. adjustable • A2 Flash hider 30 LAW ENFORCEMENTLAW

RFA3-11

Retail ...... N/A

11 1/2” BARREL Please Note: NFA RULES APPLY! Additional Upgrades Cannot be sold to civilians! Located On Pages 43-45 Agency/Department Purchase Only or export license required.

Please Note: Additional Upgrades Located On Pages 43-45

RFA2-AP4

Retail ...... N/A

NFA RULES APPLY! Cannot be sold to civilians! Agency/Department Purchase Only or export license required. 14 1/2” BARREL

Each rifle comes with 2- 30 rd. Magazines, 1- Nylon Web Sling and 1- Cleaning Kit

UPPER RECEIVER LOWER RECEIVER STOCK / GRIP / TRIGGER WEIGHT LENGTH • A2 fixed carry handle and rear sight adjustable for windage and elevation, Forged • Forged 7076-T6 aircraft aluminum alloy • Pardus stock - 6-position, telescoping, • 7076-T6 aircraft aluminum alloy fiber reinforced polymer, cheek rest, • Hard coat anodized per Mil Spec and • 27.625” • Hard coat anodized per Mil Spec and Teflon coated black curved and serrated buttplate, multiple Teflon coated black • 5.3 lbs (Extended) • Dust cover sling slots (Empty) • 23.875” • Aluminum trigger guard • Shell deflector • A2 Pistol Grip (Collapsed) • Round forward assist • Aluminum magazine release button • Standard AR-15 Trigger Group • Right hand ejection • A2 fixed carry handle and rear sight adjustable for windage and elevation, Forged • Forged 7076-T6 aircraft aluminum alloy • Pardus stock - 6-position, telescoping, • 7076-T6 aircraft aluminum alloy fiber reinforced polymer, cheek rest, • Hard coat anodized per Mil Spec and • 31.875” • Hard coat anodized per Mil Spec and Teflon coated black curved and serrated buttplate, multiple Teflon coated black • 6.9 lbs (Extended) • Dust cover sling slots (Empty) • 28.75” • Aluminum trigger guard • Shell deflector • A2 Pistol Grip (Collapsed) • Round forward assist • Aluminum magazine release button • Standard AR-15 Trigger Group • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • Detchable carry handle, rear sight adjustable for windage and elevation • Forged 7076-T6 aircraft aluminum alloy • Pardus stock - 6-position, telescoping, • 7076-T6 aircraft aluminum alloy fiber reinforced polymer, cheek rest, • Hard coat anodized per Mil Spec and • 31.875” • Hard coat anodized per Mil Spec and Teflon coated black curved and serrated buttplate, multiple Teflon coated black • 6.9 lbs (Extended) • Dust cover sling slots (Empty) • 28.75” • Aluminum trigger guard • Shell deflector • A2 Pistol Grip (Collapsed) • Round forward assist • Aluminum magazine release button • Standard AR-15 Trigger Group • Right hand ejection

• A3 Picatinny Rail Flattop, “T” Marked, Forged • Detchable carry handle, rear sight adjustable for windage and elevation • Forged 7076-T6 aircraft aluminum alloy • 7076-T6 aircraft aluminum alloy • AP4 stock - 6-position, telescoping, • Hard coat anodized per Mil Spec and • 34.875” • Hard coat anodized per Mil Spec and Teflon coated black fiber reinforced polymer Teflon coated black • 7 lbs (Extended) • Dust cover • A2 Pistol Grip (Empty) • 31.125” • Aluminum trigger guard • Shell deflector • Standard AR-15 Trigger Group (Collapsed) • Round forward assist • Aluminum magazine release button • Right hand ejection 31 338-BA-18L BA-SASS

Retail . . . .$1138.00 Retail . . . .$1539.00

308-BA-24 308-BA-16

Retail . . . . .$809.00 Retail . . . . .$809.00

308-BA-20 308-BAP4

Retail . . . . .$709.00 Retail . . . . .$889.00

308-BA-18 300-BA-20

Retail . . . . .$809.00 Retail . . . . .$894.00

Please Note: Additional Upgrades 308-BA-18L 260-BA-24 Located On Pages 43-45

Retail . . . .$1138.00 Retail . . . . .$854.00

BARREL CHAMBER TWIST UPPER RECEIVER HANDGUARD SIGHTS • 18” Length • A3-Style Flattop, • 416 Stainless steel Lite Contour lightweight upper, extruded • Carbon Fiber Free Float Tube • None • .338 Federal • 1x9 twist 338-BA-18L • Black Teflon coated from 6066-T6 aluminum w/bipod stud, Standard Length (mounting optics only) • Custom Compensator • Black Teflon coated • Thick walled, extruded • Ribbed aluminum free float tube • 24” Length from 6066-T6 aluminum • None • .308 Winchester • 1x10 twist • Standard Length 308-BA-24 • 416 Stainless steel bull barrel • Snag free design (mounting optics only) • Bipod stud installed • Black Teflon coated • 20” Length • A3-Style Flattop upper, • Elev. and windage • A2 Handguard, Round • 4140 Chrome-moly steel extruded from 6066-T6 adjustable dual aperture • 7.62 NATO • 1x10 twist • Standard Length rear sight 308-BA-20 heavy barrel aluminum w/ detachable • Aluminum delta ring • Standard A2 front • Panther Flash Hider carrying handle sight assembly • Thick walled, extruded • Ribbed aluminum free • 18” Length from 6066-T6 aluminum float tube • None • 4140 Chrome-moly steel • .308 Winchester • 1x10 twist 308-BA-18 • Snag free design • Carbine Length (mounting optics only) bull barrel • Black Teflon coated • Bipod stud installed • 18” Length • A3-Style Flattop, • 416 Stainless steel Lite Contour lightweight upper, extruded • Carbon Fiber Free Float Tube • None • .308 Winchester • 1x10 twist 308-BA-18L • Black Teflon coated from 6066-T6 aluminum w/bipod stud, Standard Length (mounting optics only) • Integral Compensator • Black Teflon coated • 18” Length • A3-Style Flattop upper, • 4-Rail free float tube • 416 Stainless steel bull barrel extruded from 6066-T6 • Standard Length • Mangonel Front • 7.62 NATO • 1x10 twist & Rear flip-up BA-SASS • Black Teflon coated aluminum • Vented sights • Panther Flash Hider • Black Teflon coated • Includes rail covers • 16” Length • Thick walled, extruded • Ribbed aluminum free • 4140 Chrome-moly steel from 6066-T6 aluminum float tube • None • 7.62 NATO • 1x10 twist 308-BA-16 heavy barrel • Snag free design • Carbine Length (mounting optics only) • Panther Flash Hider • Black Teflon coated • Bipod stud installed • 16” Length • A3-Style Flattop upper, • Standard A2 front • Ribbed aluminum free • 4140 Chrome-moly steel extruded from 6066-T6 sight assembly • 7.62 NATO • 1x10 twist float tube 308-BAP4 AP4-style contour barrel aluminum • Detachable Rear • Carbine Length • Panther Flash Hider • Black Teflon coated Sight (FT-RS) • Thick walled, extruded • Ribbed aluminum free float tube • 20” Length from 6066-T6 aluminum • Standard Length • None • 416 Stainless steel bull barrel • .300 Rem. SAUM • 1x10 twist 300-BA-20 • Snag free design • Vented (mounting optics only) • Fluted • Black Teflon coated • Bipod stud installed • A3-Style Flattop upper, • Ribbed aluminum free float tube

BARREL ASSEMBLIES BARREL • 24” Length extruded from 6066-T6 • None • .260 Remington • 1x7.5 twist • Standard Length 260-BA-24 • 416 Stainless steel bull barrel aluminum (mounting optics only) • Black Teflon coated • Bipod stud installed 32 260-BA-20 BA-A2-762-16

Retail . . . . .$854.00 Retail . . . . .$529.00

260-BA-18L BA-A3-68-20CH

Retail . . . .$1138.00 Retail . . . . .$679.00

243-BA-20 BA-A3-68-20

Retail . . . . .$854.00 Retail . . . . .$609.00

65-BA-24 BA-AP468CH

Retail . . . . .$854.00 Retail . . . . .$669.00

Please Note: Additional Upgrades BA-A2-762 BA-AP468 Located On Pages 43-45

Retail . . . . .$539.00 Retail . . . . .$599.00

BARREL CHAMBER TWIST UPPER RECEIVER HANDGUARD SIGHTS • 20” Length • A3-Style Flattop upper, • Ribbed aluminum free float • 416 Stainless steel heavy extruded from 6066-T6 tube • None • .260 Remington • 1x7.5 twist 260-BA-20 barrel, Black Teflon coated aluminum • Standard Length (mounting optics only) • Panther Flash Hider • Black Teflon coated • Bipod stud installed • 18” Length • A3-Style Flattop, • 416 Stainless steel Lite Contour lightweight upper, extruded • Carbon Fiber Free Float Tube • None • .260 Remington • 1x7.5 twist 260-BA-18L • Black Teflon coated from 6066-T6 aluminum w/bipod stud, Standard Length (mounting optics only) • Integral Compensator • Black Teflon coated • 20” Length • A3-Style Flattop upper, • Ribbed aluminum free float • 416 Stainless steel heavy extruded from 6066-T6 tube • None • .243 Winchester • 1x10 twist 243-BA-20 barrel, Black Teflon coated aluminum • Standard Length (mounting optics only) • Panther Flash Hider • Black Teflon coated • Bipod stud installed • A3-Style Flattop upper, • Ribbed aluminum free float • 24” Length extruded from 6066-T6 tube • None • 6.5 Creedmoor • 1x7.5 twist 65-BA-24 • 416 Stainless steel bull barrel aluminum • Standard Length (mounting optics only) • Black Teflon coated • Bipod stud installed • 20” Length • A2 fixed carry handle, • Elev. and windage • A2 Handguard, Round • 4140 Chrome-moly steel forged from 7075-T6 adjustable dual aperture BARREL ASSEMBLIES • 7.62 x 39mm • 1x10 twist • Standard length rear sightt BA-A2-762 heavy barrel, phosphated aluminum alloy • Aluminum delta ring • Mil Spec front sight • A2 Flash hider • Black Teflon coated post, elev. adjustable • 16” Length • A2 fixed carry handle, • Elev. and windage • GlacierGuards™, Oval • 4140 Chrome-moly steel forged from 7075-T6 adjustable dual aperture • 7.62 x 39mm • 1x10 twist • Carbine length rear sightt BA-A2-762-16 heavy barrel, phosphated aluminum alloy • Aluminum delta ring • Mil Spec front sight • A2 Flash hider • Black Teflon coated post, elev. adjustable • 20” Length • A3 Flattop w/ detachable • Elev. and windage • A2 Handguard, Round • 4140 Chrome-moly steel carry handle adjustable dual aperture • 6.8 x 43mm Rem. SPC • 1x11 twist • Standard length rear sightt BA-A3-68-20CH heavy barrel, phosphated • Forged 7075-T6 aluminum • Aluminum delta ring • Mil Spec front sight • A2 Flash hider • Black Teflon coated post, elev. adjustable • 20” Length • A3 Flattop • A2 Handguard, Round • 4140 Chrome-moly steel • Standard A2 front • 6.8 x 43mm Rem. SPC • 1x11 twist • Forged 7075-T6 aluminum • Standard length BA-A3-68-20 heavy barrel, phosphated sight assembly • Black Teflon coated • Aluminum delta ring • A2 Flash hider • 16” Length • A3 Flattop w/ detachable • Elev. and windage • GlacierGuards™, Oval • 4140 Chrome-moly steel carry handle adjustable dual aperture • 6.8 x 43mm Rem. SPC • 1x10 twist • Carbine length rear sightt BA-68AP4CH AP4-style contour barrel • Forged 7075-T6 aluminum • Aluminum delta ring • Mil Spec front sight • A2 Flash hider • Black Teflon coated post, elev. adjustable • 16” Length • A3 Flattop • GlacierGuards™, Oval • 4140 Chrome-moly steel • Standard A2 front • 6.8 x 43mm Rem. SPC • 1x10 twist • Forged 7075-T6 aluminum • Carbine length BA-68AP4 AP4-style contour barrel sight assembly • Black Teflon coated • Aluminum delta ring • A2 Flash hider 33 FTBL-LR-02 BA-A2AS

Retail . . . . .$659.00 Retail . . . . .$500.00

FTBL-LR-20 BA-A2AS-P

Retail . . . . .$629.00 Retail . . . . .$480.00

BA-DCM-1 BA-A3AS

Retail . . . . .$599.00 Retail . . . . .$500.00

BA-DCM-2 BA-A3AS-P

Retail . . . . .$585.00 Retail . . . . .$480.00

Please Note: Additional Upgrades BA-SDMR BA-A2AS-SP Located On Pages 43-45

Retail . . . . .$805.00 Retail . . . . .$565.00

BARREL CHAMBER TWIST UPPER RECEIVER HANDGUARD SIGHTS • 24” Length • A3 Picatinny Rail Flattop, • Ribbed aluminum free float tube • 416 Stainless steel bull barrel “T” Marked • None • .223 Remington • 1x9 twist • Standard Length FTBL-LR-02 • Target crowned barrel • Forged 7075-T6 aluminum (mounting optics only) • Bipod stud installed • Koelbl single-rail gas block • Black Teflon coated • 20” Length • A3 Picatinny Rail Flattop, • Ribbed aluminum free float tube • 416 Stainless steel bull barrel “T” Marked • None • .223 Remington • 1x9 twist • Standard Length FTBL-LR-20 • Target crowned barrel • Forged 7075-T6 aluminum (mounting optics only) • Bipod stud installed • Koelbl single-rail gas block • Black Teflon coated • NM rear sight, 1/4 min. • 20” Length • A2 fixed carry handle, • DCM Free floated handguard windage, 1/2 min. ele., BA-DCM-1 • 416 Stainless steel barrel • .223 Remington • 1x8 twist • Forged 7075-T6 aluminum • Round .030/.040 aperture (PRE BAN) • A2 Flash hider & bayonet lug • Black Teflon coated • Standard Length • NM front sight base & NM front sight post • NM rear sight, 1/4 min. • A2 fixed carry handle, • 20” Length • Ribbed aluminum free float tube windage, 1/2 min. ele., BA-DCM-2 • .223 Remington • 1x8 twist • Forged 7075-T6 aluminum .030/.040 aperture • Carbine Length (POST BAN) • 416 Stainless steel barrel • Black Teflon coated • NM front sight base & NM front sight post • 20” Length • A3 Picatinny Rail Flattop, • 4-rail aluminum free float tube • Standard A2 front • 416 Stainless steel heavy “T” Marked • 5.56x45mm • 1x9 twist • Standard Length sight assembly BA-SDMR barrel, w/12 groove flutes • Forged 7075-T6 aluminum • Bipod stud installed (MT-BP1) • NM front sight post • A2 Flash hider • Black Teflon coated

• 20” Length • Elev. and windage • A2 fixed carry handle, • A2 Handguard, Round • 4140 Chrome-moly steel adjustable rear sight BA-A2AS • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Standard length heavy barrel, phosphated • Standard A2 front (PRE BAN) • Black Teflon coated • Aluminum delta ring • A2 Flash hider sight assembly

• Elev. and windage • 20” Length • A2 fixed carry handle, • A2 Handguard, Round adjustable rear sight BA-A2AS-P • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Standard length • 4140 Chrome-moly steel • Standard A2 front (POST BAN) • Black Teflon coated • Aluminum delta ring heavy barrel, phosphated sight assembly • 20” Length • A3 Picatinny Rail Flattop, • A2 Handguard, Round • 4140 Chrome-moly steel “T” Marked • Standard A2 front BA-A3AS • 5.56x45mm • 1x9 twist • Standard length heavy barrel, phosphated • Forged 7075-T6 aluminum sight assembly (PRE BAN) • Aluminum delta ring • A2 Flash hider • Black Teflon coated • A3 Picatinny Rail Flattop, • 20” Length • A2 Handguard, Round “T” Marked • Standard A2 front BA-A3AS-P • 5.56x45mm • 1x9 twist • Standard length • 4140 Chrome-moly steel • Forged 7075-T6 aluminum sight assembly (POST BAN) heavy barrel, phosphated • Aluminum delta ring • Black Teflon coated • 20” Length • A2 fixed carry handle, • A2 Handguard, Round • Elev. and windage

BARREL ASSEMBLIES BARREL • 4140 Chrome-moly steel • Forged 7075-T6 aluminum adjustable rear sight • 5.56x45mm • 1x9 twist • Standard length BA-A2AS-SP heavy barrel, phosphated • Black Teflon coated • Standard A2 front • Aluminum delta ring • A2 Flash hider • Left-Hand Ejection sight assembly 34 BA-MSASS BA-16A1LP

Retail . . . .$1080.00 Retail . . . . .$439.00

BA-M12 BA-A2AS-16

Retail . . . . .$980.00 Retail . . . . .$490.00

FTBL-LR-03 BA-A2AS-16P

Retail . . . . .$629.00 Retail . . . . .$475.00

FTBL-LPC BA-A2AS-CAR

Retail . . . . .$509.00 Retail . . . . .$500.00

Please Note: Additional Upgrades BA-16A1L BA-A2AS-16A Located On Pages 43-45

Retail . . . . .$449.00 Retail . .$509.00

BARREL CHAMBER TWIST UPPER RECEIVER HANDGUARD SIGHTS • 18” Length • A3 Picatinny Rail Flattop, • Mangonel™ Flip-up • 4-rail aluminum free float tube • 416 Stainless steel bull, “T” Marked front sight • 5.56x45mm • 1x8 twist • Standard Length BA-MSASS Teflon coated black, fluted • Forged 7075-T6 aluminum • Mangonel™ Flip-up • Bipod adapter installed (MT-BP1) • Panther Flash hider • Black Teflon coated rear sight • 18” Length • A3 Picatinny Rail Flattop, • MI Flip-up rear • 416 Stainless steel heavy, “T” Marked • 4-rail aluminum free float tube sight, windage adj. • 5.56x45mm • 1x8 twist BA-M12 Teflon coated black • Forged 7075-T6 aluminum • Standard Length • YHM Flip-up front • Panther Flash hider • Black Teflon coated sight w/gas block • 16” Length • A3 Picatinny Rail Flattop, • 416 Stainless steel bull barrel “T” Marked • Ribbed aluminum free float tube • None • .223 Remington • 1x9 twist FTBL-LR-03 • Target crowned barrel • Forged 7075-T6 aluminum • Carbine Length (mounting optics only) • Koelbl single-rail gas block • Black Teflon coated • 16” Length, phosphated • Flattop, Lo-Pro • GlacierGuards™, Oval • 4140 Chrome-moly steel bull • Extruded 6066-T6 • None • 5.56x45mm • 1x9 twist • Carbine length FTBL-LPC barrel, target crowned aluminum alloy (mounting optics only) • Aluminum delta ring • Koelbl single-rail gas block • Black Teflon coated • 16” Length • A1 rear sight • A1 fixed carry handle • GlacierGuards™, Oval • 4140 Chrome-moly steel light adjustable for BARREL ASSEMBLIES BA-16A1L • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length contour barrel, phosphated windage only (PRE BAN) • Black Teflon coated • Aluminum delta ring • A1 Flash hider • A1 front sight post • A1 rear sight • 16” Length • A1 fixed carry handle • GlacierGuards™, Oval adjustable for BA-16A1LP • 4140 Chrome-moly steel light • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length windage only (POST BAN) contour barrel, phosphated • Black Teflon coated • Aluminum delta ring • A1 front sight post • 16” Length • A2 fixed carry handle • GlacierGuards™, Oval • Elev. and windage • 4140 Chrome-moly steel adjustable rear sight • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length BA-A2AS-16 heavy barrel, phosphated • Standard A2 front • Black Teflon coated • Aluminum delta ring • A2 Flash hider sight assembly

• Elev. and windage • 16” Length • A2 fixed carry handle • GlacierGuards™, Oval adjustable rear sight • 4140 Chrome-moly steel • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length BA-A2AS-16P • Standard A2 front heavy barrel, phosphated • Black Teflon coated • Aluminum delta ring sight assembly • 11 1/2” Length w/5 1/2” Flash hider (permanently attached) • A2 fixed carry handle • GlacierGuards™, Oval • Elev. and windage adjustable rear sight (16” Overall Barrel Length) • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length BA-A2AS-CAR • 4140 Chrome-moly steel, • Standard A2 front • Black Teflon coated • Aluminum delta ring Chrome-lined heavy barrel, sight assembly phosphated • 16” Length • A2 fixed carry handle • A2 Handguard, Round • Elev. and windage • 4140 Chrome-moly steel adjustable rear sight • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Standard length BA-A2AS-16A heavy barrel, phosphated • Standard A2 front • Black Teflon coated • Aluminum delta ring • A2 Flash hider sight assembly 35 BA-A3AS-16 BA-AP414CH

Retail . . . . .$479.00 Retail . . . . .$589.00

BA-A3AS-16P BA-AP414

Retail . . . . .$469.00 Retail . . . . .$519.00

BA-AP416-PMC BA-A2AS-11

Retail . . . . .$569.00 Retail . . . . .$500.00

BA-AP416 BA-A3AS-11CH

Retail . . . . .$519.00 Retail . . . . .$570.00

Please Note: Additional Upgrades BA-AP416CH BA-A2AS-07 Located On Pages 43-45

Retail . . . . .$569.00 Retail . . . . .$544.00

BARREL CHAMBER TWIST UPPER RECEIVER HANDGUARD SIGHTS • 16” Length • A3 Picatinny Rail Flattop, • GlacierGuards™, Oval • 4140 Chrome-moly steel “T” Marked • Standard A2 front BA-A3AS-16 • 5.56x45mm • 1x9 twist • Carbine length heavy barrel, phosphated • Forged 7075-T6 aluminum sight assembly (PRE BAN) • Aluminum delta ring • A2 Flash hider • Black Teflon coated • A3 Picatinny Rail Flattop, • 16” Length • GlacierGuards™, Oval “T” Marked • Standard A2 front BA-A3AS-16P • 4140 Chrome-moly steel • 5.56x45mm • 1x9 twist • Carbine length • Forged 7075-T6 aluminum sight assembly (POST BAN) heavy barrel, phosphated • Aluminum delta ring • Black Teflon coated • 16” Length • A3 Picatinny Rail Flattop, • GlacierGuards™, Oval • Standard A2 front • 4140 Chrome-moly steel “T” Marked BA-AP416-PMC • 5.56x45mm • 1x9 twist • Carbine length sight assembly AP4 contour, phosphated • Forged 7075-T6 aluminum (POST BAN) • Aluminum delta ring • No bayonet lug • Pinned Miculek Compensator • Black Teflon coated • 16” Length • A3 Picatinny Rail Flattop, • GlacierGuards™, Oval • 4140 Chrome-moly steel “T” Marked • Standard A2 front • 5.56x45mm • 1x9 twist • Carbine length BA-AP416 AP4 contour, phosphated • Forged 7075-T6 aluminum sight assembly • Aluminum delta ring • A2 Flash hider • Black Teflon coated • 16” Length • A3 Picatinny Rail Flattop, • Elev. and windage “T” Marked • GlacierGuards™, Oval • 4140 Chrome-moly steel adjustable rear sight • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length BA-AP416CH AP4 contour, phosphated • Standard A2 front • Detachable Carry Handle • Aluminum delta ring • A2 Flash hider • Black Teflon coated sight assembly • 14 1/2” Length, A2 Flash hider • A3 Picatinny Rail Flattop, • Elev. and windage “T” Marked • GlacierGuards™, Oval • 4140 Chrome-moly steel adjustable rear sight BA-AP414CH • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length AP4 contour, phosphated • Standard A2 front (Class III License Only) • Detachable Carry Handle • Aluminum delta ring • Chrome-lined barrel • Black Teflon coated sight assembly • 14 1/2” Length, A2 Flash hider • A3 Picatinny Rail Flattop, • GlacierGuards™, Oval • 4140 Chrome-moly steel “T” Marked • Standard A2 front BA-AP414 • 5.56x45mm • 1x9 twist • Carbine length AP4 contour, phosphated • Forged 7075-T6 aluminum sight assembly (Class III License Only) • Aluminum delta ring • Chrome-lined barrel • Black Teflon coated

• 11 1/2” Length, A2 Flash hider • Elev. and windage • A2 fixed carry handle, • GlacierGuards™, Oval • 4140 Chrome-moly steel adjustable rear sight BA-A2AS-11 • 5.56x45mm • 1x9 twist Forged 7075-T6 aluminum • Carbine length heavy barrel, phosphated • Standard A2 front (Class III License Only) • Black Teflon coated • Aluminum delta ring • Chrome-lined sight assembly

• 11 1/2” Length, A2 Flash hider • A3 Picatinny Rail Flattop, • Elev. and windage “T” Marked • GlacierGuards™, Oval • 4140 Chrome-moly steel adjustable rear sight BA-A3AS-11CH • 5.56x45mm • 1x9 twist • Forged 7075-T6 aluminum • Carbine length heavy barrel, phosphated • Standard A2 front (Class III License Only) • Detachable Carry Handle • Aluminum delta ring • Chrome-lined • Black Teflon coated sight assembly • 7” Length, A2 Flash hider • Elev. and windage • A2 fixed carry handle,

BARREL ASSEMBLIES BARREL BA-A2AS-07 • 4140 Chrome-moly steel • Ribbed aluminum free float tube adjustable rear sight • 5.56x45mm • 1x9 twist Forged 7075-T6 aluminum Class III heavy barrel, phosphated • Kitty Kat Length • Standard A2 front • Black Teflon coated License Only • Chrome-lined sight assembly 36 BCBA-1AS BCBA-C1AS Retail . . . . .$134.95 A-15 Retail . . . . .$164.00 A-15 BCBA-16AS BCBA-C16AS M-16 M-16

PHOSPHATE PLATED CHROMIUM PLATED BOLT CARRIER ASSEMBLIES BCBA-T1AS BCBA-D1AS Retail . . . . .$184.95 A-15 Retail . . . . .$184.95 A-15 BCBA-T16AS BCBA-D16AS M-16 M-16

TITANIUM NITRATE PLATED “DIAMOND COAT” PLATED BOLT CARRIER ASSEMBLIES 10 5 1A 13 10A 11

12 3 2 2A 4

8A 4A 6 7 1

9 9A TiN, CHROMIUM & “DIAMOND COAT” PLATED BOLT ASSEMBLY PARTS “DIAMOND COAT” PHOSPHATE CHROMIUM TITANIUM NITRIDE (BY ION BOND) ID # PART NAME RETAIL RETAIL RETAIL RETAIL

BOLT 1 (STRIPPED) • BT-02 $35.00 • BT-C1 $35.00 • BT-T2 $44.95 308 BOLT 1A (STRIPPED) • 308-BT-02 $89.95 BOLT 2 (ASSEMBLED) • BT-02A $41.00 • BT-C1A $59.00 • BT-T2A $69.00 • BT-D2A POR 2A 308 BOLT (ASSEMBLED) 308-BTASSY $139.95 3 BOLT CARRIER - A-15 • BT-13 $55.00 • BT-C2 $75.00 • BT-T1 $84.95 • BT-D13 POR

4 BOLT CARRIER - M-16 • BT-12 $60.00 • BT-C2A $75.00 • BT-D12 POR 4A BOLT CARRIER (308) • 308-BT-12 $105.95 • 308-BT-C12 $120.95 5 BOLT CARRIER KEY •BT-11 $10.95 • BT-C3 $15.00 • BT-T6 $16.95 • BT-D11 POR 6 BOLT CARRIER KEY SCREWS • BT-10 ( 2 req.) $0.50/ea. 7 CAM PIN • BT-17 $5.00 • BT-C5 $9.00 • BT-T5 $11.95

8 EJECTOR • BT-06 $2.00 • BT-C6 $5.00

8A 308 EJECTOR • 308-BT-06 $2.95

9 EXTRACTOR • BT-07 $16.95 • BT-C8 $18.00 • BT-T3 $19.95

9A 308 EXTRACTOR • 308-BT-07 $39.95

10 EXTRACTOR PIN • BT-03 $1.00

10A 308 EXTRACTOR PIN • 308-BT-03 $1.95

11 FIRING PIN - A-15 • BT-14 $6.10 • BT-T4 $8.95

12 FIRING PIN - M-16 • BT-15 $6.00 13 FIRING PIN RETAINER • BT-16 $0.75 • BT-C10 $4.00 37 .308 Lowers & Other Calibers Retail . . . . .$404.95 STRIPPED LOWER RECEIVERS .308 Win. = 308-LR-05FF

Please Note: Retail . . . . .$409.95 Additional Upgrades Located On Pages 43-45 .338 Fed. = 338-LR-05FF .300 RSAUM = 300-LR-05FF .260 Rem. = 260-LR-05FF .243 Win. = 243-LR-05FF 6.5 Creedmoor = 65-LR-05FF

CHAMBER DESCRIPTION

338-LR-05 • .338 Federal 308-LR-05 • .308 Winchester • Milled from a solid billet of 6061-T6 aluminum 300-LR-05 • .300 Remington SAUM • Hard coat anodized per Mil Spec and Teflon coated black. 260-LR-05 • .260 Remington • Integral trigger guard 243-LR-05 • .243 Winchester • FFL required for purchase. 65-LR-05 • 6.5 Creedmoor COMPLETE LOWER DESCRIPTION • Milled from a solid billet of 6061-T6 aluminum RECEIVER ASSEMBLIES • Hard coat anodized per Mil Spec and Teflon coated black. • Integral trigger guard A2 ASSEMBLY • FFL required for purchase. LOWER ASSEMBLIES LOWER • Assembly includes a fully assembled .308 DPMS Lower Receiver, A2 Pistol Grip & your choice of the following buttstock assemblies:

A2 Buttstock CHAMBER 338-LR-05ASF • .338 Federal 308-LR-05ASF • .308 Winchester Retail . . . . .$684.95 Retail . . . . .$689.95 300-LR-05ASF • .300 Remington SAUM .308 Win. = 308-LR-05ASF .338 Fed. = 338-LR-05ASF .300 RSAUM = 300-LR-05ASF • .260 Remington .260 Rem. = 260-LR-05ASF 260-LR-05ASF .243 Win. = 243-LR-05ASF 6.5 Creedmoor = 65-LR-05ASF 243-LR-05ASF • .243 Winchester 65-LR-05ASF • 6.5 Creedmoor AP4 ASSEMBLY • Mil-Spec A2 Buttstock Assembly

AP4 Buttstock CHAMBER

338-LR-05CS • .338 Federal 308-LR-05CS • .308 Winchester 300-LR-05CS • .300 Remington SAUM 260-LR-05CS • .260 Remington 243-LR-05CS • .243 Winchester Retail . . . . .$684.95 Retail . . . . .$689.95 .308 Win. = 308-LR-05CS .338 Fed. = 338-LR-05CS 65-LR-05CS • 6.5 Creedmoor .300 RSAUM = 300-LR-05CS .260 Rem. = 260-LR-05CS • an AP4 Buttstock Assembly (6-position, telescoping) .243 Win. = 243-LR-05CS 6.5 Creedmoor = 65-LR-05CS

* Combining upper barrel assembly with the lower receiver assembly 38 will result in 11% additional federal excise tax and overhead charge. .223 Lowers & Other Calibers

Retail . . . . .$184.95 STRIPPED LOWER RECEIVERS 5.56 / .223 = LR-05FF

Please Note: Retail . . . . .$189.95 Additional Upgrades Located On Pages 43-45 7.62 = 762-LR-05 6.8mm = LR-0568 .204 = 204-LR-05

STRIPPED LOWER CHAMBER DESCRIPTION • .223 Rem. / 5.56 NATO LR-05FF • Forged 7075 Aircraft aluminum alloy tempered to T6 condition 762-LR-05 • 7.62 x 39mm • Hardcoat anodized per Mil-A-8625 LR-0568 • 6.8 x 43mm Rem. SPC • Hard coat anodized per Mil Spec and Teflon coated black.

• FFL required for purchase LOWER ASSEMBLIES 204-LR-05 • .204 Ruger COMPLETE LOWER RECEIVER ASSEMBLIES A2 ASSEMBLY DESCRIPTION

• Forged 7075-T6 aircraft aluminum alloy • Hard coat anodized per Mil Spec and Teflon coated black. • FFL required for purchase. • Assembly includes a fully assembled DPMS Lower Receiver, an A2 Pistol Grip & your choice of the following buttstock assemblies: Retail . . . . .$362.95 Retail . . . . .$367.95 5.56 / .223 = LR-05ASF 7.62 = 762-LR-ASF A2 Buttstock CHAMBER 6.8mm = LR-68ASF Assembly .204 = 204-LR-ASF LR-05ASF • .223 Rem. / 5.56 NATO AP4 ASSEMBLY 762-LR-ASF • 7.62 x 39mm LR-68ASF • 6.8 x 43mm Rem. SPC 204-LR-ASF • .204 Ruger • Mil-Spec A2 Buttstock Assembly

AP4 Buttstock CHAMBER Assembly LR-05AP4 • .223 Rem. / 5.56 NATO Retail . . . . .$362.95 Retail . . . . .$367.95 5.56 / .223 = LR-05AP4 7.62 = 762-LR-AP4 762-LR-AP4 • 7.62 x 39mm 6.8mm = LR-68AP4 .204 = 204-LR-AP4 LR-68AP4 • 6.8 x 43mm Rem. SPC 204-LR-AP4 • .204 Ruger

PARDUS ASSEMBLY • an AP4 Buttstock Assembly (6-position, telescoping) PARDUS Buttstock CHAMBER Assembly LR-05PS • .223 Rem. / 5.56 NATO 762-LR-PS • 7.62 x 39mm LR-68PS • 6.8 x 43mm Rem. SPC 204-LR-PS • .204 Ruger Retail . . . . .$354.95 Retail . . . . .$359.95 • a Pardus Buttstock Assembly (6-position, telescoping) 5.56 / .223 = LR-05PS 7.62 = 762-LR-PS 6.8mm = LR-68PS .204 = 204-LR-PS UNASSEMBLED Retail . . . . .$332.95 LOWER RECEIVER ASSEMBLY * Combining upper barrel assembly with the lower receiver assembly 39 will result in 11% additional federal excise tax and overhead charge. LR-05UAF 308-LR-05LP LR-05LP

308-LR-05LP LR-05LP Retail . . . . .$490.95 Retail . . . . .$244.95

LR-05LP ASSEMBLED • 5.56 x 45mm 308-LR-05LP ASSEMBLED • .308 Winchester LOWER RECEIVER with Includes the following lower receiver parts: • Pistol Grip • Trigger • Hammer • Disconnector • Selector • Bolt Catch Spring • Detent Spring • Bolt Catch Buffer LOWER RECEIVER • Take Down Detent • Bolt Catch • Magazine Catch Spring • Bolt Catch Roll Pin • Magazine Catch Button • Magazine Catch • Front Pivot Pin • Hammer Spring PARTS KIT INSTALLED • Trigger Spring • Pistol Grip Screw • Pistol Grip Lock Washer • Selector Spring • Selector Detent • Hammer Pin • Trigger Pin • Take Down Pin • Buffer Retainer Pin • Buffer Retainer Spring • Disconnector Spring LESS BUTTSTOCK ASSEMBLY TITANIUM NITRATE & CHROMIUM PLATED LOWER RECEIVER PARTS LOWER ASSEMBLIES LOWER

3 2 5 14

4 6

11 10 9 12 7 1

PHOSPHATE CHROMIUM TITANIUM NITRIDE ID # PART NAME RETAIL RETAIL RETAIL

1 DISCONNECTOR (A-15) • LR-19 $6.00 • LR-C1 $8.00 • LR-T4 $9.95 2 DISCONNECTOR (M-16) • LR-19A $6.00 • LR-C1A $8.00 3 HAMMER (A-15) • LR-33 $20.00 • LR-C5 $25.00 • LR-T1 $28.95 4 HAMMER (M-16) • LR-34 $20.00 • LR-C5A $25.00 5 MAG CATCH • LR-13 $4.00 • LR-C6 $10.00 6 MAG CATCH BUTTON • LR-17 $3.00 • LR-C7 $6.00 7 PIVOT PINS • LR-18 $4.00 • LR-C8 $10.00 8 REAR TAKEDOWN PINS • LR-30 $4.00 • LR-C9 $10.00 9 SELECTOR (A-15) • LR-08 $9.00 • LR-C10 $15.00 • LR-T3 $16.95 10 SELECTOR (M-16) • LR-08A $9.00 • LR-C10A $15.00 11 TRIGGER (A-15) • LR-20 $15.00 • LR-C11 $20.00 • LR-T2 $28.95 12 TRIGGER (M-16) • LR-21 $20.00 • LR-C11A $20.00 13 TRIGGER/HAMMER PINS • LR-28/29 $1.25 • LR-C12 $3.00 14 BOLT CATCH • LR-LR-11 $9.00 • LR-C13 $11.00 40 DPMS ACCESSORIES “RECEIVER RUGS™” LR-RR Newly redesigned to accommodate the spring systems of the AR-trigger group without affecting the inherent reliability and protection of its original design, the Molded Receiver RugTM prevents blown primers and other debris from collecting beneath your Mil-Spec trigger and rendering your rifle inoperable. Retail ...... $3.95 Two versions of the Receiver RugTM are available from DPMS. The Molded Receiver RugTM protects Mil-Spec AR triggers and the original Non-Molded Receiver RugTM is for use with Adjustable AR Triggers. Both versions offer the same reliable protection against jamming. Due to the very nature of Law Enforcement and Military applications of the AR Rifle, this item is a “must have” when lives hang in the balance.

LR-RR* * Patent Pending Non-Molded Receiver RugTM For Adjustable Triggers

LR-RRM* Molded Receiver RugTM LR-RRM For Mil-Spec Triggers. Retail ...... $8.95

Stop Primers from Jamming Your Trigger with the “Receiver Rug”!

CS-PS Assembly Includes: CS-PS • Stock • Buffer Retail ...... $59.95 Make your shooting experience • Buffer Spring • Latch Plate more enjoyable with the addition of • Lock Ring an innovative buttstock design from • Standard 6-Position Tube DPMS! Made of lightweight, fiber reinforced black Zytel; the Pardus buttstock has four integral slots for sling attachment, in addition to the standard sling swivel, making it completely customizable to the needs of both left-handed and right-handed shooters. Customize your length of pull with the included

Monte Carlo-Style 6-position buffer tube. The Pardus buttstock design also features Cheek Rest the following design elements: • Ergonomically shaped latch with fully integrated finger grooves • Curved, saw-tooth buttplate provides a tighter cheek weld • Comfortably flared, Monte Carlo-style cheek rest • Reinforced area surrounding the latch pin provides additional strength to the latch pin to help it resist breakage should the rifle be dropped buttstock down.

4 Integrated Sling Attachment Slots

Curved Saw-Tooth Buttplate Reinforced Latch Pin Ergonomic Sling Swivel Latch

CS-PS-G

“PARDUS™”Retail ...... $74.95 CARBINE CS-PS-T

STOCK 41 2nd Position: Same Rail 1st Position: Gas Blocks MANGONEL™ FLIP-UP

FS-MG SIGHTS FS-MG TM The Patented Mangonel Front Flip-Up Sight uses an aluminum base with steel legs Retail ...... $114.95 and a steel clamp for durability and strength. This sight unit uses an A2 front sight post. A large thumb knob is easily manipulated to loosen or RS-MG tighten the clamp. The sight is designed to fit on the Mil-Std 1913 Picatinny accessory rail. The front sight has two raised positions: 1st position is for when the sight is mounted on a gas block and the 2nd position is used when both the front sight and rear sight are on the same rail. DPMS ACCESSORIES The front sight assembly weighs only 3.8 ounces. RS-MG The Patented MangonelTM Rear Flip-Up Sight also uses an aluminum base with steel legs and a steel clamp, again for durability and strength. This sight unit uses a 0.150 aperture that rests at the standard A-2 rear sight level. A large thumb knob is easily manipulated to loosen or tighten the clamp for fast adjustment or removal. The sight is designed to fit on the Mil-Std 1913 U.S. Patent #6,732,467 Picatinny accessory rail. The rear sight assembly weighs only 3.2 ounces.

RS-MGK

Retail ...... $224.95 RS-MGK GLACIERGUARDS™ An AP4 style handguard that utilizes 15 internal fins, rather than the standard aluminum double-shield, for heat dispersion. These unique fins, while dispersing the heat generated by rifle fire, also provide unsurpassed strength and rigidity for the handguard. Externally, the AP4 GlacierGuards™ feature 15 ribs that mirror the internal fins, and provide the shooter an enhanced grip. The Patented AP4 GlacierGuards™ accommodate barrels with diameters less than one inch, namely the military AP4 contoured barrel and the industry standard heavy barrel. Made of a high tech, temperature resistant polymer that withstands temperatures greater than 500 degrees which allows the handguards to resist over-heating after fully-automatic fire for over 200 rounds. The fiber-reinforced polymer provides additional strength and rigidity and keeps the handguards' weight at one half pound per pair.

BL-FG

Retail ...... $39.95

BL-FGT

Retail ...... $44.95

BL-FGG U.S. Patent # 6,945,154 21st Century Technology • Superior Strength Enhanced Grip • Heat Resistant • Light Weight 42 Due to the degree of customization on our rifles, we may require, at our GUNSMITHING discretion, a 25% non-refundable down payment upon placing your order! & UPGRADES GUNSMITHING

Gunsmithing Work Per Hour RE-1 $55.00 Install Free Float Tube RE-4 $45.00 (Labor Only)

Complete Clean & Inspection for AR Rifles RE-2 $85.00 Install Replacement Barrel on Upper Ass. RE-5 $60.00 (Barrel not included) 1. Complete Disassembly 4. Bore and chamber cleansing 2. Clean all parts and lubricate individually 5. Function test fire Recrown Muzzle on Existing Barrel RE-RM $85.00 3. Inspect all parts for wear and cracks 6. Replace gas rings and extractor spring (Barrel must be removed)

Install Free Floating Handguard RE-3 $50.00 Recrown Muzzle on New Barrel RE-RM-1 $55.00 (DCM Legal) (Labor only) (Barrel off receiver)

338, .308, .300, .260, .243, 6.5 CAL. UPGRADES UPPER RECEIVER UPGRADES HANDGUARD UPGRADES Upgrade from Rifle Photo Upper to 308 Free Float to 308 4-Rail Free Float, Stnd. UG-3084S . .$159.95 A3-Style Receiver UG-308A3 . . .$79.95 Will Not Work in the LR-30S Rifle. 308 Free Float to 308 4-Rail Free Float, Car. UG-3084C . .$159.95 Upgrade from Rifle Photo Upper to Steel UG-308ST . .$125.00 Flattop Receiver Please specify upper receiver style when ordering railed handguard upgrade. Will Not Work in the LR-30S Rifle. 308 Free Float to 308 Carbon Fiber * All upgrade prices include the required F.E.T. (Federal Excise Tax) UG-308-CF . .$109.89 Free Float, Standard Length

COMPENSATOR UPGRADES 308 Free Float to 308 Carbon Fiber UG-308-CFC .$109.89 Free Float, Carbine Length 308 Panther Flash Hider to 308 M60 Style Flash Hider. UG-308BLM60 . .N/C BUTTSTOCK UPGRADE 308 Panther Flash Hider to UG-308MIC . .$24.95 308 Buttstock to Magpul 308 PRS Stock UG-308PRS .$230.00 308 Miculek Comp

.204, 5.56x45mm, .223, 6.8mm, 7.62x39mm CAL. UPGRADES

UPPER RECEIVER UPGRADES * All upgrade prices include the required F.E.T. (Federal Excise Tax)

Upgrade from Rifle Lo-Pro or Hi-Rider Photo Upper to UG-01 $110.00 Upper to A3 Flattop UG-LHA3 $25.00 Tri-Mount

Upgrade from Rifle Photo Upper to UG-02 $35.00 Lo-Pro or Hi-Rider Hi-Rider Upper to A2 Upper UG-LHA2 $75.00 Upgrade from Rifle Photo Upper to A3 UG-03 $35.00 Upgrade from Rifle Photo Upper to Southpaw UG-06 $110.00 Upgrade from Rifle A2 with bolt Photo Upper to UG-04 $35.00 Lo-Pro Upgrade from Rifle Photo Upper to Upgrade from Rifle Southpaw Tri-Mount UG-07 $155.00 Photo Upper to Extended Rail UG-05 $95.00 Upgrade from Rifle Upgrade from Rifle Photo Upper to Photo Upper to Southpaw UG-08 $150.00 A1 Upper UG-A1 N/C Hi-Rider with bolt Upgrade from Rifle Upgrade from Rifle Photo Upper to UG-09 $145.00 Photo Upper to UG-3R $45.00 Southpaw 3-Rail Upper Lo-Pro with bolt 43 Due to the degree of customization on our rifles, we may require, at our UPGRADES discretion, a 25% non-refundable down payment upon placing your order!

HANDGUARD UPGRADES BARREL UPGRADES

Bore & Chamber Chrome Lined A2 Handguards to DCM Free Float UG-15 $205.00 UG-CH $32.00 (4140 Steel Barrel)

A2 Handguards to Free Float Tube UG-16 $40.00 Chrome-moly Steel to Stainless Steel UG-33 $50.00

A2 Handguards to Free Float Vented UG-17 $65.00 Barrel Fluting, Full Flutes UG-34 $65.00

A2 Handguards to Hot Rod UG-18 $70.00 Cryogenic Treat Barrel UG-36 $85.00

UG-19 $48.00 Standard Free Float to Vented Barrel Threading UG-THREAD $50.00

Standard Free Float to Hot Rod UG-20 $42.00 BARREL FINISH Car Handguard to Std. Free Float UG-21 $40.00 Black Teflon Barrel UG-46 $39.95

Car Handguard to Carbine Hot Rod UG-23 $75.00 Bead Blast Barrel UG-47 $30.00

Car Free Float to Carbine Hot Rod UG-24 $45.00 Stainless Steel High Polish UG-48 $60.00 Vented Car Free Float to Hot Rod UG-25 $45.00 Stainless Steel High Polish w/Black in Flutes UG-49 $100.00

4 Rail Carbine Handguard UG-4R $149.00

4 Rail Carbine Handguard with Grip UG-4G $209.95 COMPENSATOR UPGRADES A2 Flash Hider to Panther Flash Hider UG-PF $19.95 4 Rail Standard Length Handguard UG-ST4 $149.00

A2 Flash Hider to Miculek Comp UG-MIC $39.95 4 Rail Standard Length with Grip UG-ST4G $219.00

A2 Flash Hider to Bennie Cooley UG-BCT $85.95 Standard Length 6-Rail Free Float UG-6RS $179.95 Tactical Compensator (1/2 x 28 Thread)

Carbine Length 6-Rail Free Float UG-6RC $179.95 BOLT CARRIER UPGRADES

SureFire M73 Quad Rail Handguard UG-M73 $190.00 Steel to Chromium, Assembled UG-70 $39.05

Fobus Car Length 4-Rail, OD Green UG-M44G $99.95 Steel to Titanium Nitride, Assembled UG-71 $55.10

Upgrade to Carbon Fiber Hanguards UG-CF $59.95 CHARGING HANDLE GlacierGuard to AP4 Handguard UG-AP4H $45.00 UPGRADES Std. Charging Handle to Tactical Latch UG-73 $43.95 Hogue Soft Rubber Free Float Tube, Std. UG-HFFOD $104.95 UPGRADES Hogue Soft Rubber Free Float Tube, Car. UG-HFFC $99.95 SCOPE INSTALLATION Install a Scope & Rings UG-ISC $35.00 MI 2-Pc. Forearm, Ext. Car. Length UG-MCTAR17X $194.00

MI 2-Pc. Free Float, Ext. Car. Length UG-MCTAR20X $232.75 BIPOD UPGRADE

Harris Bipod Swivel Stud Installed UG-77 $20.95 RIFLE CONFIGURATION

Upgrade from Pre Ban to Post Ban UG-POST $20.00 SAFETY SELECTOR UPGRADES

Standard Selector to LR-08B Ambi Safety UG-87 $35.95

RIFLE FINISH UPGRADE Standard Selector to LR-08D Tactical Selector UG-88 $19.95 Duracoat Rifle Paint UG-DC $300.00

*Special orders other than what is shown in the catalog may have an additional charge, i.e. left-handed Arctic Panther: $92 for lefty. 44 Due to the degree of customization on our rifles, we may require, at our discretion, a 25% non-refundable down payment upon placing your order! UPGRADES

FRONT SIGHT POST UPGRADES REAR SIGHT UPGRADES

Standard A2 Sight to National Match .050 UG-59 $21.95 Standard A2 Rear Sight to X.S. Sights Ghost Ring UG-64 $33.95

Standard A2 Sight to Levang Sight UG-60 $29.95 Standard A2 Rear Sight to .046/.200 UG-65 $19.95

Standard A2 Sight to Fine Sight UG-61 $20.95 Standard A2 Rear Sight to .052/.200 UG-66 $19.95

Standard A2 Sight to Meprolight Front Only UG-62 $45.95 Standard A2 Rear Sight to .030/.040 UG-67 $19.95

Detachable Carry Handle to Mangonel Rear Sight UG-MG $N/C FRONT SIGHT UPGRADES Detachable Carry Handle to Flattop Rear Sight UG-RS N/C A2 Front Sight to Aluminum Gas Block UG-50 $ N/C

A2 Front Sight to Single Rail Gas Block UG-511 $20.00 PISTOL GRIP UPGRADES

A2 Front Sight to 4 Rail Gas Block UG-51 $20.00 Standard A2 Pistol Grip to Panther Grip UG-78 $48.95

A2 Front Sight to JP Gas Block UG-52 $70.00 Standard A2 Pistol Grip to G27 Retail . .$21.95 Black = UG-627, Green = UG-627G, Tan = UG-627T

Standard A2 Pistol Grip to Hogue Grip UG-HPG $27.95 TRIGGER UPGRADES * Law Enforcement Only Standard A2 Pistol Grip to ERGO Sure Grip UG-82 $29.95 JP Adjustable Trigger UG-69 $139.95

Install Jard Trigger UG-JT $169.95 STOCK UPGRADES A2 Stock to Adjustable A2 Stock (BS-27) UG-27 $160.00 Install Tri-Burst Upgrade* UG-TRI $40.00 A2 Stock to 6-Position AP4 Stock UG-6P $ N/C Full Auto Upgrade* UG-FA $38.00 Existing Stock to Pardus Stock, Black UG-PS $ N/C 4-Position Upgrade* UG-4P $189.00 Existing Stock to Pardus Stock, Green UG-PS-G $5.00 Two-Stage Trigger Upgrade UG-TS $105.95 Existing Stock to Pardus Stock, Tan UG-PS-T $5.00 UPGRADES JP Trigger to 2-Stage Trigger UG-JPRR $ N/C (and vise versa)) A2 Stock to A2 with DPMS Panther Logo UG-30 $25.00 Chip McCormick Drop-in Trigger Upgrade UG-CHIP $169.95 A2/AP4 Stock to Vltor Rifle Stock UG-VR $109.95 (Fixed Vltor A1 or A2 Stock)

BOLT CATCH UPGRADE A2/AP4 Stock to Vltor Carbine Stock UG-VC $129.95

Std. Bolt Catch to Tactical Bolt Catch UG-T11 $18.95 A2 Stock to ACE SOCOM Stock UG-AS $160.00

A2 Stock to ACE LTD Fixed Stock UG-ACE $69.95 MAG RELEASE BUTTON UPGRADES A2 Stock to Fixed AP4 Style Stock UG-F4 $20.00

Standard Mag Button to Over-Sized Button UG-85 $37.00 Will Not Work in the LR-308 Line of Rifles. A2 Stock to DUOSTOCK Collapsible UG-TDU $69.99

Standard Mag Button to Ambidextrous UG-86 $105.00 Will Not Work in the LR-308 Line of Rifles. A2/AP4 Stock to Full Sized Sniper Stock UG-SSR25 $166.30

A2/AP4 Stock to CAA Collapsible Stock Retail . . . . .$50.00

*Special orders other than what is shown in the catalog may have an additional Black = UG-CBS, Green = UG-CBSOD, Tan = UG-CBST charge, i.e. left-handed Arctic Panther: $92 for lefty. A2/AP4 Stock to MagPul UG-MAG310-BLK $115.00 CTR Carbine Stock (Stock Only)

A2/AP4 Stock to Magpul PRS Stock UG-PRS-B $230.00

45 MIL SPEC REPLACEMENT PARTS CHARGING HANDLE BARREL REPLACEMENT PARTS

REPLACEMENT PARTS 6

7 Additional Charging Handle Assemblies and Latches 5 Found on Page 55. 9

Retail (1) FS-01 Front Sight Post A2 (Square) $ 6.00 Retail (1A) FS-02 Front Sight Post A1 (Round) 5.00 (2) FS-03 Front Sight Detent 1.00 (1) UR-16 Charging Handle Roll Pin $ .50 (3) FS-04 Front Sight Spring .50 MIL-SPEC REPLACEMNT PARTS MIL-SPEC REPLACEMNT (2) UR-17 Charging Handle Latch Spring 1.00 (4) BL-14 Front Swivel 2.09 (3) UR-18 Charging Handle Latch 4.00 (5) BL-15 Front Swivel Rivet .50 (4) UR-19B Stripped Handle 15.00 (6) BL-16 Barrel Nut 8.00 (7) BL-17 Barrel Extension UR-19 Charging Handle Assembly 19.95 19.95 (parts 1-4 assembled) (Black) (8) BL-18 Front Sight Base (Not Drilled) 34.95 (5) CL-T Tactical Latch Only, no assembly 19.95 BL-18B Front Sight for DPMS 1" Bull Barrels 39.95 (9) FS-06 Front Sight Taper Pin, 2 Required .75 ea. A2 UPPER RECEIVER ASSEMBLY A2 UPPER ASSEMBLY REPLACEMENT PARTS REPLACEMENT PARTS

Benefits of Crush Washer: 1. One piece design eliminates need for peeling laminated Additional Upper Receivers shims or adding/moving spacers. Found on Pages 52-54. 2. Achieves proper compensator alignment in one step. 3. Automatically obtains proper torque when tightened with standard 3/4" wrench. No torque wrench required. 9 4. Contains no adhesive that can melt and cause the compensators to loosen. Includes 5. Non-reflective surface. No more shiny shims on the Charging Handle “Black Rifle”. 6. Eliminates sharp edges common to laminated shims.

1 Crush Washer

3 Barrel Compensator

6 11 10 Crush Washer (5B) Retail 7 5 8 2 4 (1) UR-21 Rear Base Sight Assembly A2 $38.00 (2) UR-22 Rear Base Spring Pin .75 (3) UR-23 Rear Base Windage Knob 6.00 (4) UR-24 Rear Base Spring, 3 required .75 ea (5) UR-25 Rear Base Ball Bearing, 3 required .50 ea 1 (6) UR-26 Rear Base Windage Knob Screw 4.00 (7) UR-27 Rear Base Aperture A2 9.00 Retail (8) UR-28 Rear Base Flat Spring A2 1.00 (1A) BL-01M Handguard Assembly, Mil-Spec $ 27.95 (9) UR-29 Rear Base Lug A2 18.95 (1B) BL-02 Carbine Handguards with Liners 19.95 (10) UR-30 Rear Base Spring Pin .75 ea (2) BL-03 Gas Tube Roll Pin .25 (11) UR-31 Rear Base Elevation Knob Spring 1.00 (3) BL-04 Gas Tube Std. 15.00 (12) UR-25 Rear Base Ball Bearing, 3 required .50 ea (3A) BL-04A Gas Tube Car 15.00 (13) UR-24 Rear Base Spring, 3 required .75 ea (3B) BL-04B Gas Tube, 7” Length 15.00 (14) UR-32 Rear Base Index Screw A2 2.00 (3C) BL-04C Gas Tube Mid. 15.00 (15) UR-33 Rear Base Index Elevation 6.00 (4) BL-06-A2 Compensator, A2 8.00 (15A) UR-33A 6/3 Elevation Index Knob 6.95 (4) BL-05-A1 Compensator, A1 8.00 (16) UR-34 Rear Base Elevation Knob 6.00 (5) BL-06-PW Peel Washer 2.00 (17) UR-02 Ejection Hinge Pin Snap Ring .50 (5A) BL-06-LW Compensator Lock Washer A1 .53 (18) UR-03 Ejection Port Cover Pin 1.50 (5B) BL-06-CW Crush Washer 2.99 (19) UR-05 Ejection Port Cover Spring .75 (6) BL-07 Barrel Snap Ring 1.50 (20) UR-04 Ejection Port Cover 5.75 (7) BL-08 Weld Spring 5.00 (20A) UR-05A Ejection Cover Assembly 8.00 (8) BL-09 Delta Ring (Mil-Spec Aluminum, not plastic) 7.00 (21) UR-06 Forward Assist Pin .75 (8A) BL-09D Delta Pack (includes BL-07, BL-08, BL-09) 11.95 (22) UR-08-RA Forward Assist, Round 11.00 (9B) UR-01-A2B A2 Upper Receiver - Black, unassembled 175.00 (22A) UR-08-R Forward Assist Assembly, Round 12.00 (9D) UR-01-A3B A2 Upper Receiver - Black, assembled 219.00 (includes UR-06, UR-07, UR-08-RA) (10) BL-10 Barrel 20" 179.00 (23) UR-07 Forward Assist Spring .75 BL-11 Barrel 16" 170.00 (24) UR-36 Receiver, Upper A2 (Black Teflon) 99.95 BL-12 Barrel 16" Carbine 175.00 Complete A2 Upper Receiver with Charging Handle BL-11-AP4 Barrel 16” AP4 Contour 189.00 (Unassembled), (11) BL-19 Handguard Caps Round 4.00 BL-19A Handguard Caps Triangular 4.00 UR-01-A2B Retail . . . .$175.00 46 MIL-SPEC REPLACEMNT PARTS MIL SPEC REPLACEMENT PARTS A1 UPPER RECEIVER ASSEMBLY LOWER ASSEMBLY REPLACEMENT PARTS REPLACEMENT PARTS

Additional Upper Receivers Found on Pages 52-54.

Retail (1) UR-01-E3 Receiver, Upper A1 (Black) $ 134.95 (2) UR-02 Ejection Hinge Pin Snap Ring .50 (3) UR-03 Ejection Port Cover Pin 1.50 (4) UR-04 Ejection Port Cover 5.75 (5) UR-05 Ejection Port Cover Spring .75 UR-05A Ejection Cover Assembly 8.00 (6) UR-06 Forward Assist Pin .75 (7) UR-07 Forward Assist Spring .75 (8) UR-08-TA Forward Assist, Tear Drop 11.00 (8A) UR-08-T Forward Assist Assembly, Tear Drop 12.00 (includes UR-06, UR-07, UR-08-TA) (9) UR-09-E3 Rear Sight Windage Drum A1 4.00 (10) UR-10-E3 Rear Base Spring Pin A1 .75 (11) UR-11-E3 Rear Sight Detent A1 .80 (12) UR-12-E3 Rear Sight Detent Spring A1 .75 17A (13) UR-28 Rear Sight Flat Spring 1.06 (14) UR-13-E3 Rear Sight Aperture A1 9.00 (15) UR-14-E3 Rear Sight Windage Screw A1 5.00 Retail (1) BS-10B Buttstock Buffer Spring (Std) $ 4.00 A2 BUTTSTOCK (1A) BS-10A Buttstock Buffer Spring (Car) Not shown 4.95 REPLACEMENT PARTS (2) BS-11 Buffer Body Assembly (Std) 18.95 (2A) BS-11A Buffer Body Assembly (Car) Not shown 15.00 (3) LR-32/33 Hammer A15 w/Spring Additional Buttstocks 21.50 (5) LR-08 Selector A15 Found on Pages 82-85. 9.00 (6) LR-09 Bolt Catch Spring .75 (7) LR-10 Bolt Catch Buffer 2.00 (8) LR-11 Bolt Catch 9.00 (9) LR-12 Bolt Catch Roll Pin .75 (10) LR-13 Magazine Catch 4.00 (10A) LR-13A Magazine Catch Assembly 8.00 (11) LR-14 Detent Spring .75 (12) LR-15 Takedown Detent .75 (13) LR-16 Magazine Catch Spring .75 (14) LR-17 Magazine Catch Button Aluminum 3.00 Retail (15) LR-18 Front Pivot Pin 4.00 (1) BS-01 Buttstock Door Assembly $14.95 (16) LR-19 Disconnector A15 6.00 (Mil-Spec Alum. Not Plastic) (16A) LR-19B Discon. Hartford Horsey logo Sporter Type Lg. Hole 18.00 (2) BS-02 Buttstock Plate 3.00 (17) LR-20/22 Trigger A15 w/Trigger Spring* 16.50 (3) BS-03 Buttstock Hinge 1.50 (17A) LR-22 Trigger Spring 1.50 (4) BS-04 Buttstock A2 33.95 (18) LR-23 Pistol Grip Screw .50 (4A) BS-04SK Skeletonized Buttstock Not shown 52.95 (19) LR-24 Pistol Grip Lock Washer .30 (5) BS-05 Buttstock Rear Swivel 3.00 (20) LR-25 Pistol Grip, Black Plastic, A2 8.00 (6) BS-06 Buttstock Hinge Pin .75 (21) LR-26 Selector Spring .75 (7) BS-07 Buttstock Screw Lower A2 1.25 (22) LR-27 Detent (Selector) 1.00 BS-08 Buttstock Screw Lower A1 (old) 4.00 (23) LR-28 Trigger Pin 1.25 BS-10 Buttstock Assembly. A2 (complete) 89.95 (23) LR-29 Hammer Pin 1.25 BS-18 Buttstock Plate Assembly 24.95 (23A) LR-29A Hartford Horsey logo Sporter Trigger/Hammer Pin 5.00 (Includes: Plate, Door, Hinge, Hinge Pin, (25) LR-30 Takedown Pin 4.00 Rear Swivel & Lower Screw) (26) BS-12 Buttstock Aluminum Spacer 3.00 BS-13 Buttstock Assembly w/plate door 54.95 (27) BS-13 Buttstock A2, Plate & Door Assembly 54.95 & swivel assembly (Items 1-7) (28) BS-14 Buttstock Screw Upper A2 2.00 (28A) BS-14A Buttstock Screw Upper A1 (old) 2.00 *FFL Required for purchase * LR-20/22 Does not include disconnector spring. LOWER TRIGGER & HAMMER REPLACEMENT PARTS RECEIVER Ground Surfaces Additional Retail Lower Receivers PARTS per Mil-Spec Found on $ 1.50 Pages 38-40, 72. (1) LR-32 Hammer Spring Retail (2) LR-33 Hammer A15 20.00 LR-34 Hammer EM16 20.00 (1) BS-09 Buttstock Extension Tube $19.95 LR-34A Hammer Hartford 35.00 (1A) CS-09 Carbine Extension Tube $19.95 Horsey logo A15 (larger hole) (1B) CS-09-DOD Carbine Extension Tube-Mil Spec $34.95 (1C) CS-09-AP4 Carbine Extension Tube-6 Position $19.95 (2) LR-01 Buffer Retainer 1.50 Retail .75 (3) LR-02 Buffer Retainer Spring (1) LR-31 Disconnector Spring $ .75 7.00 (4) LR-03 Trigger Guard Assembly (2) LR-22 Trigger Spring 1.50 .75 (5) LR-04 Trigger Guard Pin (3) LR-20 Trigger A15 15.00 179.95 (6) LR-05FF Forged Lower Receiver* LR-21 Trigger EM16 20.00 (Black Teflon) (DPMS) LR-21A Trigger Hartford Horsey 35.00 .50 LR-04A Trigger Guard Detent logo (larger hole) LR-04B Trigger Guard Detent Spring .50 47 MIL SPEC PARTS & RIFLE KITS BOLT REPLACEMENT PARTS BOLT CARRIER ASSEMBLY REPLACEMENT PARTS

“Not a Cotter key” • One piece ring design • Solid Steel eliminates problems with gas • Chrome Plated leakage due to incorrectly • Self Tightening “timed” rings • Original M16 Design • Coil spring design is easy to (6) Entire install Assembly

Retail Retail (1) BT-01 Bolt Gas Rings $ 1.00 ea. (1) BT-14 Firing Pin A-15 $ 6.10 (1A) BT-01MF McFarland 1 Piece Gas Ring 2.95 (1A) BT-15 Firing Pin EM-16 6.00 (2) BT-02 Bolt (each) 35.00 (2) BT-16 Firing Pin Retaining Pin .75 (2A) BT-02A Bolt w/ejector (installed) 41.00 (2A) BT-16S EM-16 Retaining Pin 6.99 (3) BT-03 Extractor Pin 1.00 (3) BT-17 Cam Pin 5.00

MIL-SPEC REPLACEMNT PARTS MIL-SPEC REPLACEMNT (4) BT-04 Ejector Roll Pin .50 (4) BT-09 Bolt Assembly (Assembled) 49.00 (5) BT-05 Ejector Spring 1.00 (5) BT-19 Bolt Carrier & Key A-15 & screws 65.00 (6) BT-06 Ejector 2.00 (5A) BT-20 Bolt Carrier & Key EM-16 & screws 70.00 (7) BT-07 Extractor 16.95 (6) BCBA-1 Bolt Carrier & Bolt Assembly 129.95 (8) BT-08 Extractor Spring Assembly 1.50 A-15 Unassembled BT-09 Bolt Assembly (Assembled) 49.00 (6A) BCBA-16 Bolt Carrier & Bolt Assembly 129.95 BT-9A Bolt Assembly (Unassembled) 48.00 EM-16 Unassembled

BOLT CARRIER REPLACEMENT PARTS

Retail (1) BT-10 Bolt Carrier Key Screw (2 req.) $ .50 ea. (2) BT-11 Bolt Carrier Key 10.95 (3) BT-12 Bolt Carrier EM-16 60.00 (3A) BT-13 Bolt Carrier A-15 55.00 Titanium & Chrome Parts see page 37

RIFLE KITS 20” CLASSIC RIFLE KITS RIFLE KIT COMPLETE (includes F.E.T.)*† * F.E.T. (Federal Excise Tax) –Required on complete parts kits. RFA2-20LA Retail . .$709.95 † Kit contains a forged lower receiver.

20” RIFLE KIT LESS LOWER RECEIVER (no F.E.T.)

Shown Left (Unassembled) KTA2-LL Retail . .$509.00

16” CLASSIC RIFLE KIT 16” RIFLE KIT LESS LOWER RECEIVER (no F.E.T.)

Not Pictured KTA2-LL-16 Retail . .$499.00 KTA2-LL Shown (Unassembled) Other Kits Available. Call for Pricing. ALL KITS ARE PRE BAN, 16” AP4 CARBINE RIFLE KIT KIT IS AP4 CARBINE KIT LESS LOWER RECEIVER (no F.E.T.) UNASSEMBLED PARTS Shown Left (Unassembled) KT-AP4-LL Retail . .$629.95

16” A1 CARBINE RIFLE KIT A1 CARBINE KIT LESS LOWER RECEIVER (no F.E.T.)

Not Pictured KTA1-CAR Retail . .$499.95

All kits do not include Cleaning Kit, Magazines or sling. KT-AP4-LL Shown (Unassembled) 48 RIFLE BARRELS

LONG RANGE BARRELS .308 SST BARREL, 24” .260 SST BARREL, 20”

• 24” barrel sight radius 308-BL-24 Retail . . . .$299.95 • .260 Rem. • .308 Win., 1x10” Twist • 1x7.5” Twist 260-BL-20 Retail . . . .$299.95

.243 SST BARREL, 20” .308 SST BARREL, 24” FLUTED • .243 Win. 243-BL-20 Retail . . . .$299.95 • 24” barrel sight radius • 1x10” Twist

• .308 Win., 1x10” Twist 308-BL-24F Retail . . . .$340.95 ACCESSORIES-BARRELS

7.62x39mm BARRELS 16” 7.62x39mm HEAVY BARREL, PRE BAN

.308 SST SASS BARREL, 18” BL-762-16 Retail . . . .$239.00 • Full Flutes • .308 Win., 1x10” Twist 308-BL-SASS Retail . . .$299.95 • Black Teflon Coated

20” 7.62x39mm HEAVY BARREL, 1x10” TWIST

BL-762 Retail . . . .$239.00 BL-762P Retail . . . .$239.00 PRE BAN POST BAN .308 AP4 BARREL, 16”

• AP4 Style • .308 Win., 1x10” Twist 308-BL-AP4 Retail . . . .$299.95

6.8mm SPC BARREL • 16” AP4 Style, 6.8mm SPC, 1x10 Twist BL-68AP4 Retail . . . .$229.95

.260 SST BARREL, 24” • .260 Rem. .204 BULL BARREL • 1x7.5” Twist 260-BL-24 Retail . . . .$299.95 • 24” 416 SST Bull Barrel • .204 Cal. 204-BL-24 Retail . .$259.95 • Full Flutes • 1x12 Twist

CRYO ACCURIZING Our acclaimed computer-controlled process harnesses the power of Cryo-Accurizing—a one-time, homogenous process which relieves stresses in gun barrels. Stresses, which are inherent in all gun UG-36 Retail . . . . .$85.00 barrels, cause a barrel to bend or warp as it heats from repeated firing. This warping causes a Barrels being purchased stringing, walking or wandering effect in the shot group. After our Cryo-Accurizing process, the barrel will no longer bend or warp. The end result is a firearm barrel with proven, increased performance. The Please allow extra time for delivery bottom line: it works. Why Cryo-Accurizing? Cryo-Accurizing permanently and dramatically improves the performance and • Enhanced accuracy • Increased barrel life useful life of metals in everything from trumpets and gun barrels to racing engines and machine tools. • Easier cleaning • Less fouling Using a proprietary computer-controlled process, the metal is cooled slowly to -300°F, held for 20-30 hours, then raised to +300°F, and slowly returned to room temperature. Although not apparent to the Cryo-Accurizing ensures a dramatic, permanent increase naked eye, the improvements to the metal are significant: a denser molecular structure and a larger in the accuracy and durability of gun barrels. Period. surface area of contact.

49 5.56/.223 CAL. BARRELS .223 CAL. SST BARRELS 5.56 CAL. SST BARRELS

20” SST DCM BARREL, PRE BAN 20” SST SDM-R BARREL , FLUTED

• .223 Cal., 1x8” Twist • Cal.: 5.56 NATO, 1x8” Twist • Includes Adjustable Front Sight Post BL-DCM Retail . . . .$199.00 • Fluted/Stripped - Pre Ban BL-DC-F Retail . . . .$199.00 • 416 Stainless Steel Heavy Barrel

20” SST DCM BARREL, POST BAN 18” SST MINI SASS BARREL • .223 Cal., 1x8” Twist BL-DCMP Retail . . . .$199.00 • Includes Adjustable Front Sight Post • Cal.: 5.56 NATO, 1x8” Twist • Stripped - Pre Ban BL-SASS Retail . . . .$239.95 • Fluted & Black Teflon Coated • 416 Stainless SteelBull Barrel

20” SST BARREL W/BARREL EXTENSION • .223 Cal., 1x8” Twist 18” SST MARK 12 BARREL • Less Front Sight & Handguard Cap BL-DC Retail . . . .$179.00 • Cal.: 5.56 NATO, 1x8” Twist • Stripped - Pre Ban BL-M12 Retail . . . .$179.00 • Black Teflon Coated • 416 Stainless Steel Heavy Barrel

.223 CAL. SST BULL BARRELS 5.56x45mm HEAVY BARRELS

• 416 Stainless Steel • 1x8” or 1x9” Twist • Matte Stainless Finish • Target Crowned Muzzle • No Bayonet Lug • All Post Ban 20” 1X9” TWIST 16” BULL BARREL W/SINGLE RAIL GAS BLOCK BL-10 Retail . . . .$179.00 • 5.56 x 45mm, 1x9” Twist

ACCESSORIES-BARRELS BULL-03-16 Retail . . . .$239.00 Now with a Koelbl Single Rail Gas Block!

20” 1x9” TWIST, POST BAN

20” BULL BARREL W/SINGLE RAIL GAS BLOCK • Target Crowned Muzzle BL-10P Retail . . . .$179.00 • No Bayonet Lug • 5.56 x 45mm BULL-03 Retail . . . .$259.00 Now with a Koelbl Single Rail Gas Block!

16” 1x9” TWIST 20” BULL BARREL W/FRONT SIGHT BL-10-A Retail . . . .$180.00 • 20” barrel sight radius BULL-10 Retail . . . .$269.00 • Uses standard A2 handguards • 5.56 x 45mm, 1x9” Twist

16” 1X9” TWIST 24” BULL BARREL W/SINGLE RAIL GAS BLOCK • Carbine barrel sight radius BL-11 Retail . . . .$170.00 • Uses carbine handguards BULL-03-24 Retail . . . .$289.00 • 5.56 x 45mm, 1x9” Twist Now with a Koelbl Single Rail Gas Block!

50 5.56/.223 CAL. BARRELS 5.56 x 45mm HEAVY BARRELS 16” 1X9” TWIST, AP4 CONTOUR 16” TACTICAL BARREL, POST BAN

• 5.56 x 45mm, 1x9” Twist BL-10-AP Retail . . . .$180.00 • AP4 Style BL-11-AP4 Retail . . . .$189.00 • 5.56 x 45mm, 1x9” Twist

16” SHORTY CARBINE, 1x9” TWIST 5.56mm SHORT BARRELS 14.5” AP4 CONTOURED BARREL* • 5.56 x 45mm BL-12 Retail . . . .$185.00 • 1x9” Twist • *14.5” barrels require a Class 3 license BL-AP4 Retail . . . .$204.00 • Chrome Lined • Chrome lined • 1x9” Twist ACCESSORIES-BARRELS

16” AP4 BARREL W/MICULEK COMP 14.5” HEAVY BARREL * • *14.5” barrels require a Class 3 license • Post ban BL-AP4PMC Retail . .$229.95 BL-14H Retail . . . .$185.00 • With permanently attached Miculek • 1x9” Twist Compensator • Chrome lined • 5.56 x 45mm

16” 1x9” TWIST, POST BAN 14.5” HEAVY BARREL w/PANTHER FLASH HIDER* • *14.5” barrels require a Class 3 license • Post ban BL-11P Retail . .$170.00 • 1x9” Twist BL-14H-PF Retail . . . .$212.00 • Target Crowned muzzle • Chrome lined • No bayonet lug • 5.56 x 45mm

16” LIGHTWEIGHT CONTOUR, PRE BAN 11.5” HEAVY MACHINE GUN BARREL*

• *11.5” barrels require a Class 3 license • Pre ban BL-L16 Retail . . . .$169.00 BL-12B Retail . . . .$185.00 • Muzzle diameter is .640” • 1x9” Twist • 5.56 x 45mm • Chrome lined

16” LIGHTWEIGHT CONTOUR, POST BAN 7” KITTY KAT BARREL*

• Post ban BL-L16P Retail . . .$169.00 • *7” barrels require a Class 3 license BL-12A Retail . . . .$185.00 • Muzzle diameter is .640” • 1x9” Twist • 5.56 x 45mm • Chrome lined

DPMS BARREL SPECIFICATIONS Barrel Information To achieve the best results for accuracy you should clean the chamber and bore after every round for EXCEPT WHERE SPECIFIED OTHERWISE: the first 25 rounds, then every 10 rounds up to 100 rounds. It usually takes about 200 rounds per • CRYO Barrel Deep Freeze Available • Bayonet lug on Pre Ban barrels barrel for optimum accuracy. Please keep in mind that our barrels are production barrels, not custom barrels. Accuracy is dependent upon many factors such as bullet weight, powder load, rifling twist, rifling (see pg. 30) • Threaded muzzle on Pre Ban barrels lands, operator technique, etc. Our production barrels have achieved anywhere from 1/8" to 1 1/2" • 6 groove, Right-Hand twist • A.I.S.I. 4140 Chrome-moly steel M.O.A.. Obviously, we would hope that every production barrel would shoot 1/2" M.O.A., but with all of • Button Rifled • Most SST barrels are a sandblasted matte the above factors, we cannot guarantee a specific group size. NOTE: Using reloaded ammunition will • Manganese phosphated finish & natural gray finish void warranty. Modifying chamber or barrel voids warranty. This includes re-reaming of chamber, re-turning barrel to a lesser diameter and/or re-threading barrel for compensator or All bull barrels are target attachments. crowned as shown.

51 BOLTS AND UPPER RECEIVERS

WOLFF EXTRA POWER .308 EXTRACTOR SOUTHPAW BOLT ASSEMBLIES EXTRACTOR SPRINGS SPRING KIT LEFTY BOLT LEFTY BOLT For Use w/extractor spring insert from the original 5.56/.223 factory spring. ASSEMBLY, COMPLETE ASSEMBLY, STRIPPED

308-BT-08K Retail . . . .$2.49 WF-SP-5 Retail ...... $4.49 1 Spring

WF-SP-53 Retail . . . . .$10.99 BT-02SA Retail . . . . .$82.95 BT-02S Retail . . . . .$60.00 3 Pk.

WF-SP-510 Retail . . . . .$22.99 10 Pk. Bolts have been modified for ejection out of the left side of the receiver versus the right side. Includes both extractor springs for the .308. 6.8mm BOLTS AND PARTS 7.62x39mm BOLT ASSEMBLIES & PARTS BOLT CARRIER ASSEMBLY 6.8mm EXTRACTOR

7.62 BOLT ASSEMBLY, 7.62 x 39 EXTRACTOR BCBA-68AS Retail . . . .$165.90 BT-68E Retail . . . . .$23.95 ASSEMBLED BT-762E Retail . . . . .$18.95 BT-762 Retail . . . . .$77.95 • Assembled, includes bolt • Extractor Only • 6.8mm SPC • 6.8mm SPC • Extractor Only • 7.62 x 39mm 6.8mm BOLT, ASSEMBLED 6.8mm BOLT, STRIPPED

7.62 x 39 BOLT, STRIPPED BT-68 Retail . . . . .$79.95 BT-68S Retail . . . . .$52.95

BT-762B Retail . . . . .$49.95

• Bolt Assembly, assembled • Stripped Bolt • 6.8mm SPC • 6.8mm SPC • Bolt Assembly, assembled • Bolt Stripped • 7.62 x 39mm Conversion or replacement parts for the 6.8mm SPC caliber. Will not work with .223. .308 UPPER RECEIVERS AND PARTS

ACCESSORIES-RECEIVERS .308 A3-STYLE UPPER .308 A3-STYLE UPPER SOLID STEEL FLATTOP .30 CAL REPAIR KIT RECEIVER, STRIPPED RECEIVER, ASSEMBLED UPPER RECEIVER, .308 308-BP-01 Retail . . . . .$79.95

308-FTT-EA Retail . . . .$169.95 308-FTT-EA1 Retail . . . .$209.95

Includes one (1) each of the following parts: 308-BT-14 Firing Pin, AR • Machined from 4140 steel for increased 308-BT-07 Extractor hardness and wear resistance. 308-BT-16 Firing Pin Retaining Pin • Balanced, smoother, sleeker and more rigid 308-BT-03 Extractor Pin alternative to the standard .308 upper 308-BT-05 Ejector Spring receiver. 308-BT-08 Extractor Spring • Adds stability and increases accuracy by Assembly bringing the rifle’s center of balance closer to 308-BT-06 Ejector 308-BT-04 Ejector Roll Pin 308-FTT-EA1 SHOWN the shooter’s body. • Cannot Be Used On The LR-30S Rifle! 308-BT-17 Cam Pin • Extra thick walled, extruded from 6066-T6 • 308-FTT-EA1 includes the charging And three (3) of the following parts: aluminum handle, ejection cover assembly & 308-FTT-LPS Retail . . . .$300.00 • Low style flattop allows use of detachable forward assist. 308-BT-01 Bolt Gas carry handle. • Cannot Be Used On The LR-30S Rifle! Rings .308 LIGHTWEIGHT .308 DETACHABLE DPMS .308 CHAMBER FLAG A3 UPPER RECEIVER CARRYING HANDLE CF-001 Retail . . . .$3.50 308-FTT-LW Retail . .$199.95 308-DCH Retail . .$139.95

The pointed end of this chamber flag can be used as a Delrin Punch. The recessed area in the front of the flag holds an A2 Sight Tool (sold separately). A hole punched in the bottom of the flag allows you to secure an A2 Sight Tool with cable or string (not included). A rounded tab at the Carry handle designed to attach to 308 AR top can be used as a scope adjustment tool (no Flattop upper receivers allows use of iron sights. need to carry coins). Lightweight version of the DPMS A3 Upper Easily installed and removed. Machined from Receiver. 6061-T6 aluminum bar stock. This chamber flag is included with all DPMS LR-308 rifle purchases. Cannot Be Used On The LR-30S Rifle!

52 UPPER RECEIVERS UPPER RECEIVERS & ASSEMBLIES 3-RAIL UPPER RECEIVER “A3” FLATTOP, “A3” FLATTOP, TRIPLE RAIL UPPER RECEIVER STRIPPED ASSEMBLED FTT-3R Retail . . . .$159.95 FTT-EA Retail . . . .$125.00 FTT-EA1 Retail . . . .$165.00 STRIPPED COMPLETE ASSEMBLY ACCESSORIES-RECEIVERS

FTT-EA1 shown. Stripped A3 also available (FTT-EA) DPMS unveils the Lo-Pro-style 3-Rail upper receiver, an AR receiver that provides three additional mounting options. Machined from a 6066-T6 extrusion, this upper receiver is hardcoat anodized per Mil Spec and Teflon® coated a matte black. The upper receiver features a standard Picatinny top rail with 15 slots, but making this AR receiver unique is the additional rails featured on the left and right sides. These two sides rails, located 22.5 degrees from horizontal, provide additional slots for mounting a • Low style flattop allows use of detachable carry handle. variety of accessories. The left-hand rail features 15 slots while the right-hand rail provides an • Used by the military additional six. 3-Gunners and tactical shooters alike will appreciate the ability to mount back-up • Stripped A3 does not include the charging handle, ejection cover or forward assist assy. ironsights should their optic ever fail. The Lo-Pro-style 3-Rail Upper Receiver from DPMS will make the • FTT-EA1 includes the charging handle, ejection port cover assembly & forward assist. age-old problem of not having enough rails for accessories obsolete. Great for 3-Gun Competition!

FLATTOP LO-PRO HI-RIDER FLATTOP TRI-MOUNT™ FLATTOP DPMS EXTENDED RAIL

FTT-LP Retail . . . .$125.00 FTT-HR Retail . . . .$125.00 FTT-01 Retail . . . .$159.00 UR-ER Retail . . . .$189.95

FTT-01 Retail ...... $159.00

FTT-02 shown. Does Not Work w/LR-11T Stripped Tri-Mount also available (FTT-01)

FTT-HRA Retail . . . .$139.95 FTT-02 Retail . . . .$197.95

• Dust cover omitted for lightweight, smooth, • Dust cover omitted for lightweight, smooth, A solid integral two-piece extension of the snag-free function Raise the optical axis of your AR without loss snag-free function upper receiver that allows operators to install • Rail height slightly higher than A3 upper of rigidity, plus add the ability to mount • Rail height approximately 1 7/8” above a wider variety of optical accessories with • State-of-the-art aluminum material additional accessories on the two lower bore center line greater security and stability. The extended • Picatinny Rail Weaver rails with standard one inch rings. rail can support multiple simultaneous • No forward assist or ejection cover • State-of-the-art aluminum material • Picatinny Rail • FTT-02 is assembled with charging attachments such as the red dot reflex sight • No forward assist or ejection port cover handle, forward assist & ejection port and your night vision system or forward • FTT-HRA includes the charging handle cover assembly. mounted reflex sight.

DETACHABLE A2 UPPER A2 UPPER RECEIVER A1 UPPER CARRYING HANDLE PARTS KIT

FT-DCH Retail ...... $89.95 UR-36 Retail . . . . .$99.95 URPK-LCH Retail . . . . .$50.00 UR-01-E3 Retail . . . .$134.95 LESS CHARGING HANDLE

UR-01-A3B shown. UR-01-E3 Shown Stripped A2 upper also available (UR-36) URPK-1 Shown

UR-A1 Retail ...... $199.99 UR-01-A3B Retail . . . .$219.00 URPK-1 Retail . . . . .$68.00 WITH CHARGING HANDLE • A1 style fixed carry handle Carry handle designed to attach to AR Flattop • A2 sight assembly, windage and elevation • Forged from 7075 aluminum that has been T6 upper receivers allows use of iron sights. adjustable Both Include: heat treated, hard coat anodized (Mil-A-8625A) Easily installed and removed. Made from 7075 • Shell deflector, dust cover and forward assist (1) Forward Assist Assembly • UR-01-A3B is assembled with charging and Teflon coated black (1) Ejection Cover Assembly forged aluminum. handle, forward assist & ejection port • UR-A1 is ASSEMBLED with the charging cover assembly. UR-01-A3B is shown. (1) A2 Rear Sight Assembly handle, shell deflector, dust cover, teardrop forward assist and A1 sight assembly (windage only). UR-01-E3 SHOWN! 53 UPPER RECEIVERS UPPER RECEIVERS FROM VLTOR

MUR A3 W/BOLT ASSIST MUR A3 WITH SHELL VIS W/BOLT ASSIST & VIS W/SHELL & SHELL DEFLECTOR DEFLECTOR ONLY SHELL DEFLECTOR (CAR) DEFLECTOR ONLY (CAR)

UR-MUR-1A Retail . . . .$229.95 UR-MUR-1S Retail . . . .$199.95 FF-VIS-1AK Retail . . . .$629.95 FF-VIS-1SK Retail . . . .$595.95

The MUR is a rigid MilSpec flat-top upper The MUR is a rigid MilSpec flat-top upper receiver made to fit all AR15/M16/M4 rifles receiver made to fit all AR15/M16/M4 rifles and The CARBINE LENGTH Versatile Interface The CARBINE LENGTH Versatile Interface and carbines. The MUR was developed to carbines. The MUR was developed to give the Structure (VIS) upper receiver assembly. The Structure (VIS) upper receiver assembly. The give the customer a MilSpec correct upper customer a MilSpec correct upper receiver with VIS is a polylithic upper receiver assembly VIS is a polylithic upper receiver assembly receiver with a thicker wall making the MUR a thicker wall making the MUR upper that ties the normally individual receiver and that ties the normally individual receiver and upper receiver a more rigid platform. With receiver a more rigid platform. With shell handguard into an aggregate single part. handguard into an aggregate single part. bolt assist and shell deflector. deflector only. Includes bolt assist and shell deflector. Includes shell deflector only.

VIS W/BOLT ASSIST & VIS W/SHELL VIS W/BOLT ASSIST & VIS W/SHELL SHELL DEFLECTOR (MID) DEFLECTOR ONLY (MID) SHELL DEFLECTOR (STD) DEFLECTOR ONLY (STD)

FF-VIS-2AK Retail . . . . .$674.95 FF-VIS-2SK Retail . . . .$649.95 FF-VIS-3AK Retail . . . .$729.95 FF-VIS-3SK Retail . . . .$695.95 ACCESSORIES-RECEIVERS

The MID LENGTH Versatile Interface Structure The MID LENGTH Versatile Interface Structure The STANDARD LENGTH Versatile Interface The STANDARD LENGTH Versatile Interface (VIS) upper receiver assembly. The VIS is a (VIS) upper receiver assembly. The VIS is a Structure (VIS) upper receiver assembly. The Structure (VIS) upper receiver assembly. The VIS polylithic upper receiver assembly that ties the polylithic upper receiver assembly that ties the VIS is a polylithic upper receiver assembly that is a polylithic upper receiver assembly that ties normally individual receiver and handguard into normally individual receiver and handguard into ties the normally individual receiver and hand- the normally individual receiver and handguard an aggregate single part. Includes bolt assist an aggregate single part. Includes shell guard into an aggregate single part. Includes into an aggregate single part. Includes shell and shell deflector. deflector only. bolt assist and shell deflector. deflector only. SOUTHPAW UPPER RECEIVERS FLATTOP LO-PRO SOUTHPAW A2 TRI-MOUNT SOUTHPAW HI-RIDER UPPER RECEIVER UPPER RECEIVER UPPER RECEIVER UPPER RECEIVER

• Dust cover omitted for lightweight, • Machined from a 7075-T6 aircraft allloy forging • Raise the axis of your AR without the loss of • Same great construction as our standard smooth, snag-free function • Anodized black and Teflon coated rigidity, plus allows you to mount additional Hi-Rider, now available in left-hand ejection • Rail height slightly higher than A3 upper • Bolt modified 180° for left side ejection accessories on the two lower Weaver rails • Rail height approximately 1 7/8” above bore • State-of-the-art aluminum material • Right side port cover boss is unmachined • Features include: Left-hand ejection and the center line • Picatinny Rail • All dimensions are held to exacting Military standard right side forward assist. Right • Does not feature forward assist, dust cover or requirements side port cover boss remains un-milled. ejection port cover for snag-free operation.

FTT-01SPLPB Retail . . .$199.95 URSP-01A2 Retail . . .$199.95 FTT-SPB Retail . . .$249.00 FTT-01SPB Retail . . .$249.00 With Stripped Bolt With Stripped Bolt With Stripped Bolt With Stripped Bolt

These left handed upper assemblies do not include the charging handle or forward assist. These left handed upper assemblies do not include the charging handle or forward assist.

54 CHARGING HANDLES LATCHES, GAS TUBES CHROMIUM PLATED “MICULEK” STEEL TAC LATCH CHARGE TACTICAL LATCH CHARGE HANDLE HANDLE ASSEMBLY REAR A2 BASE LUG CH-ST Retail ...... $59.95 CH-TL Retail ...... $43.95 CL-T Retail ...... $19.95 UR-C29 Retail ...... $20.95 ACCESSORIES-GAS SYSTEM

EJECTION PORT COVER

UR-C2 Retail ...... $10.00 For use with the A-15/EM-16 and SR-25 series For use with the A-15/EM-16 and SR-25 series A2 Charging handle made out of steel. Will rifles. Replaces the charging handle, and allows rifles. Replaces the charging handle latch, allows work in any A-15/EM-16 upper receiver. easy function of rifle with either hand. A must for easy function of rifle with either hand. A must for • “Won’t Bend!” the tactical or scoped Flattop rifles. Charging the tactical or scoped Flattop rifles. Charging • “Great for Competition!” handle assembly. handle not included. Latch only. GASBUSTER CHARGING GASBUSTER MILITARY BIG BADGER CHARGING HANDLE, BIG FLAT LATCH LATCH CHARGING HANDLE HANDLE, GEN II TAC LATCH

UR-M84BLF Retail . . . . .$86.75 UR-M84MBL Retail . . . .$89.95 UR-18-G2 Retail ...... $19.95 LATCH ONLY

EJECTION COVER PIN

UR-C3 Retail ...... $5.00

A smaller profile Tactical latch for the AR series of rifles, allows the easy operation of the charging handle with either hand.

M69 Gas Buster A-15/E-16/AP4 Charging M69 Gas Buster A-15/E-16/AP4 Charging CH-G2 Retail ...... $43.95 Handle by PRI. Features the Big Flat Latch. Handle by PRI. Features the Big Latch. CHARGING HANDLE ASSEMBLY Increases safety by inhibiting harmful blowback Increases safety by inhibiting harmful blowback FORWARD ASSISTS gas and oil particles from striking shooter's gas and oil particles from striking shooter's face face and glasses." and glasses." UR-C4 Retail ...... $20.00 PRI BIG FLAT LATCH PRI BIG LATCH SOG TAC LATCH w/CHARGING HANDLE

UR-18BLF Retail ...... $17.99 UR-18BL Retail ...... $19.95 CH-5130 Retail ...... $43.95

UR-C4 = ROUND

UR-C4A = TEARDROP

UR-C4A Retail ...... $20.00 Oversized latch handle that is quick & easy to Oversized latch handle that is quick & easy to Manufactured by SOG Armory. Features a cycle. FLAT. Latch Only. cycle. Latch Only. stainless steel Tac Latch and a standard aluminum charging handle. Sold only as a complete assembly.

55 GAS BLOCKS & GAS SYSTEMS SASS GAS BLOCK KOELBL SINGLE RAIL VLTOR STEEL CLAMP VLTOR STEEL CLAMP .308 GAS BLOCKS GAS BLOCK GAS BLOCK, STAINLESS

GB-2CS Retail . .$65.95 GB-SASS Retail . . . .$109.95 Retail ...... $69.95 GB-2C Retail . .$54.95 .750 Diameter 308-GB-SR7 = .750 diameter 308-GB-SR9 = .936 diameter

Manufactured by DPMS! Low profile gas block designed to fit under the free float tube. Machined from 4130 steel. .750 Diameter .936 Diameter GB-SASS-1 Retail . . . .$109.95 Single rail gas block for .308 cal. rifles. Picatinny rail on top of gas block. Correct height for the The Vltor Low-Profile Gas Block covers one-inch The Vltor Low-Profile Gas Block covers one-inch .936 Diameter LR-308 rifles with the Lo-Pro style upper receiver of the barrel’s surface and is made to the tightest of the barrel’s surface and is made to the tightest to attach iron sights. Rifles with the .308 A3-style tolerance. This gas block is offered in 4140 tolerance. This gas block is offered in 17-4PH upper receivers should use GB-SR7 (.750 dia. carbon steel. Clamp Mount Style. stainless steel. Clamp Mount Style. barrels) or GB-SR-9 (.936 dia. barrels). CMMG MICRO GAS BLOCK

Retail ...... $59.95 YANKEE HILL VLTOR SET SCREW VLTOR SET SCREW TWO-PIECE GAS BLOCK GAS BLOCK, STAINLESS GAS BLOCK

GB-M625 - .625” Diameter GB-YHM-9390A Retail . .$66.95 GB-2SS Retail . .$58.95 GB-2S Retail . .$51.95 GB-M750 - .750” Diameter GB-M936 - .936” Diameter

New production Micro Gas Block by CMMG. Ultra com pact design fits standard .936, .750, and.625 diameter barrels. Secures with two set screws. 4150 steel. VLTOR SIGHT TOWER GAS BLOCK

GB-VST-1C Retail .$225.00 ACCESSORIES-GAS SYSTEM ACCESSORIES-GAS

This gas block replaces your existing front sight The Vltor Low-Profile Gas Block covers one-inch The Vltor Low-Profile Gas Block covers one-inch and allows the user to mount accessories to its of the barrel’s surface and is made to the tightest of the barrel’s surface and is made to the tightest two Picatinny rails. It is mounted by the use of tolerance. This gas block is offered in 17-4PH tolerance. This gas block is offered in 4140 four socket head cap screws for easy installation. stainless steel. Screw Mount Style. carbon steel. Screw Mount Style. This gas block allow the mounting of our forearms without the removal of your muzzle accessory.

YANKEE HILL LOW YANKEE HILL RAILED GAS AR15 GAS SYSTEM KITS PROFILE GAS BLOCK BLOCK w/BAYONET LUG The VST folding front sight and gas block is an all-steel, flip-up design, with a spring loaded dual-plunger detent. There is no lock. If hit, the GB-YHM-9381A Retail . .$38.95 GB-YHM-9836A Retail . .$72.95 Retail ...... $28.95 sight will fold down, rather than damage a locking mechanism. It incorporates a QD sling GS-KT - STANDARD swivel cup mount, and uses an AK front sight GS-KTC - CARBINE post. BADGER MK12 GAS BLOCK

GB-249.30 Retail . .$65.00

GS-KT Includes Replaces your existing 1 Gas Tube Roll Pin (BL-03) front sight to provide a 1 Std Length Gas Tube (BL-04) low profile design that can 3 Bolt Gas Rings (BT-01) be used to mount a rifle 2 Bolt Carrier Key Screws (BT-10) length forearm to a This gas block replaces your existing front sight 1 Bolt Carrier Key (BT-11) carbine length barrel. It is This gas block replaces your existing front sight and allows the user to mount accessories to its mounted using two set to provide a simple, low profile design that can top Picatinny rail while retaining the bayonet lug GS-KTC Includes screws. Made from high be used to mount a rifle length forearm to a and sling mount. It is mounted by the use of quality steel and finished carbine length barrel. It is mounted by the use of four socket head cap screws for easy installation. 1 Gas Tube Roll Pin (BL-03) with a Mil Spec two set screws. Manufactured from high quality This gas block allow the mounting of our 1 Car Length Gas Tube (BL-04A) phosphate coating. steel and finished with a Mil Spec phosphate forearms without the removal of your muzzle 3 Bolt Gas Rings (BT-01) coating. accessory. 2 Bolt Carrier Key Screws (BT-10) 1 Bolt Carrier Key (BT-11)

56 GAS BLOCKS & .308 FREE FLOAT TUBES

4 RAIL GAS BLOCK BULL BARREL 308 CARBON FIBER FREE FLOAT TUBES GAS BLOCK 308-FF-CF Retail . . . .$133.50 GB-4R Retail ...... $49.95 BULL-02 Retail ...... $29.95

308-FF-CFC Retail . . . .$133.50

Aluminum gas block with four Picatinny Aluminum gas block fits DPMS Bull barrels or ACCESSORIES-GAS SYSTEMS rails for mounting multiple accessories.Currently any barrel with a diameter of .936” at the gas made for the DPMS Bull barrels. Bore diameter is port. Hardcoat anodized black. .936 anodized black. Also available in .750. Also Available for Super Bull barrels with • .750 dia. = GB-4RA • .936 dia. = GB-4R 1.10” diameter hole. BULL-02-SB Also Available for standard barrels with The 2.1” diameter .308 caliber carbon fiber free float handguards from DPMS stay cooler than the .750” diameter hole. BULL-02-ST standard aluminum free float tubes and weigh less, providing you with a unique alternative to the traditional handguard. The carbon fiber utilized in these free float tubes works in two ways, internally GB-4RA Retail ...... $49.95 JP ENTERPRISES the unidirectional carbon fiber increases the strength and stability of the tube while externally the bi-directional carbon fiber provides a textured look and feel to the free float tube. Additionally, an ADJUSTABLE GAS BLOCK internal layer of fiberglass prevents corrosion between the aluminum tube and the carbon fiber, ensuring a long lasting lightweight alternative tube. Includes the hard anodized barrel nut. .750 Dia. KOELBL SINGLE Standard: Length = 12.6875”, Weight = 0.45 lbs. Carbine: Length = 7.3125”, Weight = 0.3 lbs. RAIL GAS BLOCK GS-JP Retail . . . . .$69.95 Aluminum Gas Block, .750 dia 308 CARBON FIBER .308 STANDARD GB-SR7 Retail ...... $49.99 HANDGUARD FREE FLOAT TUBES

308-FF-CL Retail . . . .$125.00 Retail ...... $59.95 308-FF-02 = STANDARD LENGTH 308-FF-01 = CARBINE LENGTH

Single rail gas block .750 dia. Picatinny rail on top of gas block. .936 Dia. KOELBL SINGLE RAIL GAS BLOCK GS-JPGS-2S Retail . . . .$79.95 Steel Gas Block, .750 dia GB-SR9 Retail ...... $49.99 Manufactured by Clark Custom.. LR-308 Carbon Fiber Handguard is light-weight • Aluminum Construction • Anodized Black JP ENTERPRISES and has a unique appearance. • Ribbed not Knurled • “Free Float Accuracy” ADJUSTABLE GAS BLOCK All two piece Construction. V-TAC MODULAR HG V-TAC MODULAR HG GS-JP-B Retail ...... $89.95 SYSTEM, CARBINE SYSTEM, STANDARD Aluminum Bull Barrel Gas Block, .936 dia 308-FF-4D Retail . . .$149.95 308-FF-1D Retail . . .$149.95 Single rail gas block .936 dia. Picatinny rail on top of gas block. GT STEEL SINGLE RAIL GAS BLOCK

GB-5031 Retail ...... $49.95

V-Tac Modular Hand Guard System for DPMS V-Tac Modular Hand Guard System for Carbine LR-308 or Knights SR-25 type rifles. length gas system on DPMS LR-308 16" or 18" GS-JP-4S Retail . . . . .$89.95 barrels • 1.75 ID, 2.00 OD, 12.5" OAL SST w/Quick Detach Point • 1.75 ID, 2.00 OD, 7.0" OAL • Weight: 15 oz. Large Bore Gas Block, .936 dia • All matte black finish • All matte black finish

GT Steel single rail gas block. Fits standard heavy barrels.

57 .308 AND AR FREE FLOAT TUBES .308 CAL. FLOAT TUBES CARBON FIBER FREE FLOAT TUBES 4-RAIL FREE FLOAT TUBES FOR LR-308’S

FF-CF Retail . . . . .$99.00 STANDARD LENGTH

308-FF-4SH Retail . . . .$189.95 308-FF-4SL Retail . . . .$189.95 STANDARD LENGTH, STANDARD LENGTH, ORIGINAL LR-308 HEIGHT A3 HEIGHT FF-CFC Retail ...... $89.00 CARBINE LENGTH

308-FF-4CH Retail . . . .$179.95 308-FF-4CL Retail . . . .$179.95 CARBINE LENGTH, CARBINE LENGTH, The 2” diameter carbon fiber free float handguards from DPMS stay cooler than the standard ORIGINAL LR-308 HEIGHT A3 HEIGHT aluminum free float tubes and weigh less, 40% less, providing you with a unique alternative to the traditional handguard. The carbon fiber utilized in these free float tubes works in two ways, internally the unidirectional carbon fiber increases the strength and stability of the tube while externally the The .308 cal. version of the 4-rail free float tube features a solid one-piece free float tube made from bi-directional carbon fiber provides a textured look and feel to the free float tube. Additionally, an 6066-T6 aluminum. The Picatinny style rails are integrally machined into the free float tube. Two rail internal layer of fiberglass prevents corrosion between the aluminum tube and the carbon fiber, heights are available, one for the A3-style upper receiver and the other for the original LR-308 upper ensuring a long lasting lightweight alternative tube. Includes the hard anodized barrel nut. receiver. Each rail height is available in two lengths, standard and carbine. The free float tubes are Standard: Length = 12.625”, Weight = 0.55 lbs. Carbine: Length = 7.25”, Weight = 0.35 lbs. vented and hard coat anodized per Mil Spec and matte black in color. Overall width dimension is 2.1”, only slightly wider than the AR free float tubes and include a manganese phosphated steel locking collar to control the timing of the rails. BASIC FREE FLOAT TUBES .308 VENTED .308 SASS 4-RAIL • Aluminum Construction • Anodized Black • Ribbed not Knurled • “Free Float Accuracy” FREE FLOAT TUBES FREE FLOAT TUBE All two piece Construction.

Retail ...... $79.95 308-FF-SASS Retail . . .$229.95

308-FF-02VSTD = STANDARD LENGTH 308-FF-01VCAR = CARBINE LENGTH

STANDARD LENGTH CARBINE LENGTH

FF-02 Retail ...... $53.95 FF-01 Retail ...... $49.95 ACCESSORIES-HANDGUARDS

This 4-rail free float tube for the LR-308 Rifle VENTED FREE FLOAT TUBES Series features a solid one-piece free float tube made from 6000 Series aluminum with a T6 heat • Aluminum Construction • Anodized Black treatment. The Picatinny style rails are integrally • Ribbed not Knurled • “Free Float Accuracy” machined but now feature 4 removable rails at All two piece Construction. the front of the tube. 16 individual vents help • Aluminum Construction • Anodized Black increase the airflow to the barrel. The low profile • Ribbed not Knurled • “Free Float Accuracy” design of the free float tube is compatible to All two piece Construction. the 308 A3-Style upper receiver. BADGER ORDNANCE DANIEL DEFENSE .308 STABILIZER HG LITE RAIL STANDARD LENGTH CARBINE LENGTH 308-FF-525-04 Retail . . .$189.00 308-FF-DDLR Retail . . .$425.00 FF-02VSTD Retail . . . . .$78.95 FF-01VCAR Retail . . . . .$74.95

HOT ROD HANDGUARDS Free floating handguard with rods inserted into two aluminum end caps. The best balanced and ventilated free floated handguard available. Standard and carbine lengths available. (Unassembled) (No Bipod Stud)

Same as the AR-15 Stabilizer guard but with a wider mounting block to accommodate the This 12" Lite Rail is machined from 6061-T6 added weight and recoil of a 308. Made with a Aircraft Grade Hardened Aluminum. The rail's STANDARD LENGTH CARBINE LENGTH full length M1913 integral down the full length of unique "Bolt Up" mounting system mates with the top. Drilled and tapped to accept the the upper receiver to create a singular FF-HGR Retail ...... $89.95 FF-HCAR Retail ...... $84.95 Picatinny rail sections. Aluminum alloy, Mil spec 'monolithic' rail along the entire top portion of the hard coat black anodizing. rifle.

58 FREE FLOAT TUBES

4-RAIL FREE FLOAT TUBES 6 RAIL FREE FLOAT TUBES

FF-ST4 Retail . .$149.00 FF-6R Retail . .$159.00 STANDARD LENGTH STANDARD LENGTH

FF-4R Retail . . .$134.00 ACCESSORIES-HANDGUARDS CARBINE LENGTH

FF-6RC Retail . .$141.00 CARBINE LENGTH FF-4RK Retail . . . . .$129.95 KITTY KAT LENGTH Looking for additional ways to add accessories to your AR rifle but finding yourself limited to 4-Rail handguards and free float tubes? DPMS has the answer to your needs. DPMS-Panther Arms goes a step further and offers the 6-Rail Free Float Tube, standard and carbine length, for your AR rifle. These The improved version of the 4-rail free float tube features a solid one-piece free float tube made from new 6-Rail handguards feature a 2-3/8” diameter 6000 series aluminum one-piece free float tube with 6000 Series aluminum with a T6 heat treatment. The Picatinny style rails are integrally machined into a T6 heat treatment, hard-coat anodized black. Machined into the free float tube are six Picatinny rails the free float tube. The Picatinny rails are designed for the attachment of foregrips, flashlights, optics featuring 30 slots per rail on the standard length tubes and 17 slots per rail on the carbine lengths. 48 or any other type of rail mounted accessories. The free float tube is also vented with 16 individual vents individual vents increase the airflow to the barrel and help cool the standard length tube while 24 vents disperse the heat on the carbine version. Each 6-Rail Free Float Tube includes a manganese for increased airflow to the barrel. The overall width dimension is 2 3/8” giving it the same feel as a AP4 phosphated steel locking collar that controls the timing on the rails. Now you can mount as many handguard. accessories as you want to your AR-style rifle to make it completely customized. P.O.F. P12X 4-RAIL P.O.F. P12 4-RAIL P.O.F. P9X 4-RAIL P.O.F. P9 4-RAIL

FF-P12X Retail . . . . .$295.95 FF-P12 Retail . . . . .$285.00 FF-P9X Retail . . . . .$279.00 FF-P9 Retail . . . . .$269.00

Full-Length Free Float tube with 4-Rails for Full-Length Free Float tube with 4-Rails for Mid-Length Free Float tube with 4-Rails for Mid-Length Free Float tube with 4-Rails for mounting accessories. Top rail extends fully to mounting accessories. Top rail extends across mounting accessories. Top rail extends fully to mounting accessories. Top rail extends across the rear of the A3 Upper Receiver rail. a majority of the A3 Upper Receiver rail. the rear of the A3 Upper Receiver rail. a majority of the A3 Upper Receiver rail. Bipod/Sling Stud included and can be installed Bipod/Sling Stud included and can be installed Bipod/Sling Stud included and can be installed Bipod/Sling Stud included and can be installed on either side of the tube or on the bottom. on either side of the tube or on the bottom. on either side of the tube or on the bottom. on either side of the tube or on the bottom.

P.O.F. P4X 4-RAIL P.O.F. P4 4-RAIL HOGUE SOFT RUBBER HOGUE SOFT RUBBER FREE FLOAT TUBE, Std. FREE FLOAT TUBE, Carbine FF-P4X Retail . . . . .$269.00 FF-P4 Retail . . . . .$249.00

FF-15004 Retail . . . . .$69.99 FF-15012 Retail . . . . .$89.95 BLACK

Standard Length. AR-15/M-16 free float aluminum forend with over-molded rubber gripping area. Carbine Length Free Float tube with 4-Rails for Carbine Length Free Float tube with 4-Rails for Hogue Soft Rubber Free Float Tube, mounting accessories. Top rail extends fully to mounting accessories. Top rail extends across Carbine Length. AR-15/M-16 free float the rear of the A3 Upper Receiver rail. a majority of the A3 Upper Receiver rail. FF-15204 Retail . . . . .$74.99 aluminum forend with over-molded rubber Bipod/Sling Stud included and can be installed Bipod/Sling Stud included and can be installed gripping area. on either side of the tube or on the bottom. on either side of the tube or on the bottom. OD GREEN

59 FREE FLOAT TUBES & HANDGUARDS YH FREE FLOAT 4-RAIL YH FREE FLOAT 4-RAIL YH FREE FLOAT 4-RAIL YH FREE FLOAT 4-RAIL FOREARM, 12.5” FOREARM, 9.675” FOREARM, 9.2” FOREARM, 7.2” (CARBINE)

FF-YHM-9636 Retail . .$159.95 FF-9638 Retail . . . . .$128.50 FF-9634 Retail . . . .$128.50 FF-YHM-9631 Retail . .$120.00

Overall Length: 12.5”, Weight: 14.75 oz. Overall Length: 9.675”, Weight: 12.9 oz. Overall Length: 9.2”, Weight: 12.4 oz. Overall Length: 7.2”, Weight: 10.6 oz. *New and Improved* Now utilizing anti-rotation *New and Improved* Now utilizing anti-rotation *New and Improved* Now utilizing anti-rotation *New and Improved* Now utilizing anti-rotation screws to insure that the forearm stays solid screws to insure that the forearm stays solid screws to insure that the forearm stays solid screws to insure that the forearm stays solid even under strenuous use. With the addition of even under strenuous use. With the addition of even under strenuous use. With the addition of even under strenuous use. With the addition of the anti-rotation screws the forearms are now the anti-rotation screws the forearms are now the anti-rotation screws the forearms are now the anti-rotation screws the forearms are now even better suited for forward grips and optics. even better suited for forward grips and optics. even better suited for forward grips and optics. even better suited for forward grips and optics. Features include: mounting points and Mil. Features include: mounting points and Mil. Features include: mounting points and Mil. Features include: mounting points and Mil. Spec. Picatinny rails. The barrel nut and Spec. Picatinny rails. The barrel nut and Spec. Picatinny rails. The barrel nut and Spec. Picatinny rails. The barrel nut and forearm tube are made of aircraft quality forearm tube are made of aircraft quality forearm tube are made of aircraft quality forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs. aluminum and hardcoat anodized to Mil. Specs. aluminum and hardcoat anodized to Mil. Specs. aluminum and hardcoat anodized to Mil. Specs. The jam nut is made from quality steel and The jam nut is made from quality steel and The jam nut is made from quality steel and The jam nut is made from quality steel and phosphate coated. All assemblies include: one phosphate coated. All assemblies include: one phosphate coated. All assemblies include: one phosphate coated. All assemblies include: one jam nut, one barrel nut, and one forearm tube. jam nut, one barrel nut, and one forearm tube. jam nut, one barrel nut, and one forearm tube. jam nut, one barrel nut, and one forearm tube. FREE FLOAT FOREARM FREE FLOAT FOREARM FREE FLOAT FOREARM YH FREE FLOAT SYSTEM, FULL LENGTH SYSTEM, MID LENGTH SYSTEM, CARBINE LENGTH 4-RAIL FOREARM, 4.15”

FF-YHM-9432A Retail .$158.95 FF-YHM-9430A Retail . .$94.95 FF-YHM-9431A Retail . .$86.95 FF-YHM-9809A Retail . .$105.00

*New and Improved* Now utilizing anti-rotation screws to insure that the forearm stays solid ACCESSORIES-HANDGUARDS even under strenuous use. With the addition of Yankee HIll Machine Customizable Free Float Yankee HIll Machine Customizable Free Float Yankee HIll Machine Customizable Free Float the anti-rotation screws the forearms are now Forearm System! These customizable tubes are Forearm System! These customizable tubes are Forearm System! These customizable tubes are even better suited for forward grips and optics. a great addition to any firearm just as they are. a great addition to any firearm just as they are. a great addition to any firearm just as they are. Features include: mounting points and Mil. They feature slotted heat vents and two They feature slotted heat vents and two They feature slotted heat vents and two Spec. Picatinny rails. The barrel nut and mounting points. Each tube is drilled and tapped mounting points. Each tube is drilled and tapped mounting points. Each tube is drilled and tapped forearm tube are made of aircraft quality at the 3, 6, 9 and 12 o’clock positions. All at the 3, 6, 9 and 12 o’clock positions. All at the 3, 6, 9 and 12 o’clock positions. All aluminum and hardcoat anodized to Mil. Specs. assemblies include: one jam nut, one barrel assemblies include: one jam nut, one barrel assemblies include: one jam nut, one barrel The jam nut is made from quality steel and nut, and one forearm tube. nut, and one forearm tube. nut, and one forearm tube. phosphate coated. All assemblies include: one Overall length: 12.5 in - Weight 14.6 oz. Overall length: 9.675 in - Weight 12 oz. Overall length: 7.2 in - Weight 9.5 oz. jam nut, one barrel nut, and one forearm tube. VLTOR EXT. LENGTH HOT ROD HANDGUARD V-TAC MODULAR YH CARBINE SMOOTH HANDGUARD w/HANDGRIP HANDGUARD SYSTEM FOREARM

Retail ...... $235.95 FF-HGS Retail . . . . .$119.95 Retail ...... $149.95 FF-YHM-5000 Retail . . .$136.00

FF-CASV-EL BLACK FF-CASV-ELT TAN FF-CASV-ELG GREEN

FF-JPHG-1M = FULL LENGTH • 1.75 ID, 2.00 OD, OAL:12.5" • Weight: 15 oz.

FF-JPHG-4M = CARBINE LENGTH • 1.75 ID 2.00 OD, 7.0" OAL.

This CASV chassis is made entirely of Hot Rod Handguard with adjustable sliding The JP modular handguard system has been This free floating forearm features a smooth aluminum with exception to the stainless handstop. re-designed to offer the best versatility of any design for a more comfortable grip while steel mounting hardware. After mounted, the handguard system while retaining the incorporating a full length top rail. The forearm CASV adds less than 1lb to the firearm's lightweight and cooling capacity of their original also features three 2.5" rails that extend beyond overall weight. design. the front sight to allow the mounting of accessories.

60 FREE FLOAT HANDGUARDS 4-RAIL HANDGUARD 4-RAIL HANDGUARD 2 PC. FREE FLOAT 2 PC. FREE FLOAT from MIDWEST IND. from MIDWEST IND. FOREARM, CARBINE FOREARM, MID LENGTH

FF-MCTAR23 Retail . . . .$164.95 FF-MCTAR20 Retail . . . .$184.99 FF-MCTAR20X Retail .$217.75 FF-MCTAR21 Retail .$224.95

Weight: 13.5 oz. Manufactured by Midwest Industries Weight: 14.0 oz. • MIL-STD 1913 rails.

Manufactured by Midwest Industries • T-marked for accessory location. ACCESSORIES-HANDGUARDS • No removal of barrel or front sight for • Constructed of 6061 hard coat anodized for a installation. Simply cut off the delta ring for a lifetime of service. easy install. • Uninterrupted or monolithic look upper rail. • MIL-STD 1913 rails. • High quality at an affordable price. • T-marked for accessory location. • Constructed of 6061 hard coat anodized for a GT 2 PC. CARBINE QUAD Manufactured by Midwest Industries. 4.25” Manufactured by Midwest Industries. Carbine lifetime of service. RAIL HANDGUARD length, 4-rail two piece handguard. length Free Float Tube Handguard, 4-rail two • Uninterrupted or monolithic look upper rail. piece. • High quality at an affordable price. FF-9761 Retail . . . . .$139.95 2 PC. FOREARM, EXT. 2 PC. FOREARM, 2 PC. FOREARM, CARBINE LENGTH MID LENGTH CARBINE LENGTH

HG-MCTAR17X Retail .$179.00 HG-MCTAR18 Retail .$167.50 HG-MCTAR17 Retail . . .$155.00

Manufactured by GT. 2 pc. Carbine Quad Rail Handguard. BADGER STABILIZER

Manufactured by Midwest Industries Manufactured by Midwest Industries HANDGUARD • No removal of barrel or front sight for • No removal of barrel or front sight for Two-Piece, Carbine Length. Manufactured by installation. Simply cut off the delta ring for a installation. Simply cut off the delta ring for a Midwest Industries. FF-249-04 Retail . . .$152.00 easy install. easy install. • MIL-STD 1913 Rails, T-marked for accessory • MIL-STD 1913 rails. • MIL-STD 1913 rails. location. • T-marked for accessory location. • T-marked for accessory location. • Constructed of 6061 aluminum, hard coat • Constructed of 6061 hard coat anodized for a • Constructed of 6061 hard coat anodized for a anodized for a lifetime of service. lifetime of service. lifetime of service. • Simple to install, installation similar to • Uninterrupted or monolithic look upper rail. • Uninterrupted or monolithic look upper rail. factory/plastic units. • High quality at an affordable price. • High quality at an affordable price. • Solid Lock-up YANKEE HILL FULL YANKEE HILL MID YANKEE HILL CARBINE LENGTH HANDGUARD LENGTH HANDGUARD LENGTH HANDGUARD

HG-YHM-9803 Retail . . .$197.00 HG-YHM-9805 Retail . . .$168.50 HG-YHM-9670 Retail . . .$147.50 From Badger Ordnance. Ergonomic Beavertail profile and wide flat bottom makes it great for Tactical or sport shooting. The handguard is specifically designed to provide a stable platform for shooting unlike a round handguard. BADGER RAIL 3PK

FF-249-15 Retail . . . .$45.00

Made by Yankee Hill Machine. These Made by Yankee Hill Machine. These Made by Yankee Hill Machine. These handguards are designed to replace your handguards are designed to replace your handguards are designed to replace your standard plastic handguards with a 4-rail standard plastic handguards with a 4-rail standard plastic handguards with a 4-rail Picatinny design. Simply remove your existing Picatinny design. Simply remove your existing Picatinny design. Simply remove your existing handguard panels and insert these in their handguard panels and insert these in their handguard panels and insert these in their 3Pack Rail Section for Badger Stabilizer place. place. place. Handguard (FF-249-04) Above.

61 HANDGUARDS

“GLACIERGUARDS™” DCM NATIONAL MATCH FREE FLOAT TUBES & HANDGUARDS “No metal heatshield required!” BL-FG Retail ...... $39.95 FF-DCM Retail . . . . .$151.95 BLACK

“DCM”

US Patent # 6,945,154 Free floating handguards are used by those that want the best accuracy, but free float tubes in the past did not meet the requirements for DCM matches, and they look different. Now DPMS has a “GlacierGuards™” replacement free float tube that replaces the factory handguards and looks the same as the factory. Easy to install for better accuracy. Includes swivel rivet. BL-FGT Retail ...... $44.95 BL-FGG Retail ...... $44.95 Replace your EM-16/A-15 handguard for better accuracy. TAN OD GREEN CUSTOM FORMED LEAD WEIGHT

For more than 100 years, fins have been used to cool metal objects. Now DPMS Panther Arms HG-MD Retail ...... $27.95 brings that concept to your A-15 rifle. DPMS Panther Arms introduces the “GlacierGuards™” an AP4 style handguard that utilizes 15 internal fins, rather than the standard aluminum double-shield, for heat dispersion. These unique fins, while dispersing the heat generated by rifle fire, also provide unsurpassed strength and rigidity for the handguard. Externally, the “GlacierGuards™” feature 15 ribs that mirror the internal fins, and provide the shooter an enhanced grip. The “GlacierGuards™” accommodate barrels with diameters less than one inch, namely the military contoured barrel and the industry standard heavy barrel. Made of a high tech, temperature resistant “DCM” polymer that withstands temperatures greater than 500 degrees. This allows the handguards to resist • Custom formed lead weight for the bottom half of the A2 handguards-DCM Handguards. over-heating after continuous fully-automatic fire for over 200 rounds. The fiber-reinforced polymer • Adds 3.334 lbs. to your handguard for extra weight and accuracy. provides additional strength and rigidity and keeps the handguards’ weight at just one half pound per • No shipments to California pair, compared to the standard .4 pounds per pair. US Patent # 6,945,154. MIL SPEC. AP4 HANDGUARD M-33 HANDGUARDS M73 QUAD RAIL AP4 HANDGUARD FROM SUREFIRE BL-02 Retail . . . . .$19.95 HG-M33 Retail ...... $84.99 BL-02AP4 Retail . . . . .$69.95 FF-M73 Retail . . . . .$199.00 ACCESSORIES-HANDGUARDS

Made by Command Arms Accessories. The M33 is built to fit the M16/AR15 carbine. Replace your existing hand-guard with this polymer handguard which provides 2 mounting rails, complete with 2 Vented and 2 Non-Vented thermal rubber rail covers and heat shields. No tools or gunsmithing Double walled heat shield AP4 handguard. Small oval design, glass filled polymer. required, handguard mounts just like factory Mil-Spec. Large Oval Design! Single wall, anodized heat shield. Tight handguards. Rails can be mounted on the The SureFire® 4-Rail M73 Handguard System. fitting. Black in color. left/right side, or the top/bottem of the handguard. “Mil-Spec!” LIFETIME WARRANTY Four (4) rail covers included. M-44 HANDGUARDS, STANDARD LENGTH M-44 HANDGUARDS, CARBINE LENGTH HG-M44C = BLACK Retail ...... $129.95 Retail ...... $99.95 HG-M44CODG = OD GREEN HG-M44S = BLACK HG-M44CTAN = TAN HG-M44SODG = OD GREEN POLYMER HG-M44STAN = TAN Carbine Length. Polymer and aluminum handguards. • 4-sided Picatinny rail system • Metal heatshields dissipate high tempertures producted during sustained rapid fire. • Thermal rubber covers enhance grip and protect rails when not in use. • No gunsmithing required, handguards mounts just like factory handguards. • FREE RAIL COVERS INCLUDED Standard Length. Polymer handguards. • 4-sided Picatinny rail system LIFETIME WARRANTY • Metal heatshields dissipate high tempertures producted during sustained rapid fire. • Thermal rubber covers enhance grip and protect rails when not in use. HG-M44SM Retail . . .$105.99 • No gunsmithing required, handguards mounts just like factory handguards. HG-M44SM = BLACK • 2 Vented and 2 Non-Vented Rail covers included. ALUMINUM LIFETIME WARRANTY

62 VERTICAL GRIPS

SOG GRAPHITE YANKEE HILL QUICK VERTICAL GRIP BY FRONT GRIP VERTICAL GRIP ACTION FOLDING GRIP COMMAND ARMS MAG HOLDER

Retail ...... $39.95 VG-YHM-9640 Retail . . .$74.50 Retail ...... $25.95 FAB-FGMH Retail . . . . .$44.95

VG-1002-B = BLACK VG-BVG = BLACK VG-1002-G = OD GREEN VG-BVGG = OD GREEN VG-1002-T = TAN VG-BVGT = TAN ACCESSORIES-VERTICAL GRIPS

This grip is actuated with the push of a button. It locks securely in the folded and battle-ready positions. Designed to function properly even Vertical Ergonomic Grip by Command Arms. Forward Grip with Magazine Holder combines under strenuous military use. Installs easily on Quick, detachable with 3-battery storage forward gripand magazine holder. Quick release Graphite vertical grip with aluminum lock down any Picatinny rail with the use of the supplied compartments. Screw driver required. Available or secure bolt attachment. Left side magazine post. Available in black, OD green and tan. socket head cap screw. in black, OD green and tan. release button. Lightweight polymer construction. MASEN VERTICAL HAND GRIP FOR 4-RAIL VERTICAL FORWARD VERTICAL LASER GRIP GRIP W/RAIL FREE FLOAT TUBE GRIP (POP BOTTLE) CRIMSON TRACE HG-MG Retail ...... $17.95 FF-GR Retail ...... $59.95 VG-4253 Retail ...... $15.00 LS-VG Retail . . . . .$399.95

XTA Tactical, lightweight vertical grip will attach to Picatinny rails. Comes with a 6” mounting rail Forward grip for mounting on the 4 Rail Free Vertical Forward Grip by ERGO. Ejection molded, Vertical foregrip attaches to the Picatinny rail on for standard handguards. Made by the John Float Tube. Quickly attaches and detaches with slides onto standard Picatinny or Weaver rail. the forearm and provides a laser beam upon Masen Company. thumbscrew. ALUMINUM! Set-screw retention. Extremely tough. Black. gripping. FOLDING VERTICAL ERGONOMIC VERTICAL STANDARD VERTICAL VERTICAL GRIP, GRIP by COMMAND ARMS GRIP by COMMAND ARMS GRIP by COMMAND ARMS PICATINNY RAIL

VG-FFG2 Retail . . . . .$33.99 VG-AVG Retail ...... $19.99 VG-SVG Retail ...... $19.99 VG-VG1 Retail ...... $29.99

Also Also Also available in available in available in Tan and Tan and Tan and OD Green. OD Green. OD Green.

Distinctive ergonomically designed tactical Distinctive ergonomically designed tactical vertical grips. vertical grips. • Facilitates natural fighting stance holds on your • Facilitates natural fighting stance holds on • Vertical & Horizontal tactical grip, push button rifle your rifle Permits the operator to get "on target" faster and release converts grip from horizontal to vertical • Improved performance and reaction time, • Improved performance and reaction time, improves muzzle control during rapid fire. Allows • Ergonomic design reduces “on target” time increases muzzle reduces “on target” time increases muzzle the weapon to be held with a natural fighting • Skeletonized for reduced weight control during rapid fire control during rapid fire stance. Fits any Weaver or Picatinny rail. Interior • Folds under so it is out of the way when not in • Ergonomically designed with finger grooves • Ergonomically designed with finger grooves of grip serves as a plugged storage compartment. use • Plugged storage compartment • Plugged storage compartment No tools or gunsmithing required. LIFETIME WARRANTY LIFETIME WARRANTY LIFETIME WARRANTY LIFETIME WARRANTY 63 HANDGUARD ACCESSORIES, BAYONETS MAKO FOREGRIP RAIL COVERS FLASHLIGHT MOUNT Retail ...... $12.00/EA. PC. Retail ...... $8.00/EA. PC. Retail ...... $4.95/EA. PC. Full Rail Cover, Long Length Full Rail Cover, Medium Full Rail Cover, Short VG-TGRIP Retail . . . . .$77.99

Full Rail Cover Full Rail Cover Full Rail Cover FF-4362BK Black FF-4361BK Black FF-4360BK Black FF-4362OD OD Green FF-4361OD OD Green FF-4360OD OD Green FF-4362CB Coyote Brown FF-4361CB Coyote Brown FF-4360CB Coyote Brown • Long Length • Medium Length • Short Length • Covers 15 slots • Covers 10 slots • Covers 5 slots

Retail ...... $12.00/EA. PC. Retail ...... $4.95/EA. PC. Low Profile Rail Cover, Long Low Profile Rail Cover, Short

This unique tactical grip allows the operator to Low Profile Rail Cover Low Profile Rail Cover use his 1" Flashlight. The most ergonomically FF-4373BK Black FF-4370BK Black designed vertical foregrip. FF-4373OD OD Green FF-4370OD OD Green • Has storage compartment for batteries, cleaning Coyote Brown Coyote Brown kit, etc. FF-4373CB FF-4370CB • A 1" flashlight mount is incorporated along with • Long Length • Short Length an On/Off Trigger located on the grip itself. (No need for bulky and pricey pressure switches) • Covers 18 slots • Covers 5 slots • Fits any weapon with a weaver or picatinny rail. • Mounted using a quick release locking system with an additional locking screw as backup. These covers can be used to form a very low profile grip and protect the unmounted rail area from damage. • No gunsmithing required. Made from Santoprene, these covers have a rubbery surface and are easily shortened by cutting to length. • Molded from reinforced polymer composite. Available in a variety colors and textures. Prices reflect individual piece prices. Sold individually. Made by • Super lightweight. Falcon Industries. SURE GRIP MAGPUL RAIL COVERS M9 LIGHT WEIGHT M9 BAYONET & BAYONET & SCABBARD SCABBARD PS-RGS Retail ...... $9.98 Retail ...... $11.95/ea. FF-MAG012-BLK = BLACK Retail ...... $115.00 Retail ...... $95.00 FF-MAG012-DKE = DARK EARTH BL-M9LW = BLACK BL-M9 = BLACK

ACCESSORIES-BAYONETS FF-MAG012-OD = OD GREEN BL-M9LWT = TAN BL-M9T = TAN BL-M9LWG = GREEN

• 7” blade, Blade .235” thick, 12-1/8” OAL Pac-Skin™ is a new generation of non-slip, sure • Black oxide non-reflective surface gripping rubber technology. This “peel-n-stick” • Milled sawteeth on back. rubber material provides the “ultimate gripping Textured thermoplastic nylon handle and scabbard. surface” on those items where improving the grip Each rail cover covers 15 slots of rail Equipped with a quick release military holster. was difficult, if not impossible, in the past. A The new unit weighs 15% LESS then the current finely textured neoprene rubber surface coupled • Provides rubbery grip surface. standard M9 model by using a special high grade with a “peel-n-stick” adhesive backing makes a • Protects the operator from sharp rail edges. stainless steel alloy with aluminum interior BL-M9G Retail . . . . .$105.00 components. Performance and balance are perfect accessory for your favorite rifle. • Protects unmounted rail areas from damage. OD GREEN Two pieces - Pistol grip and Forend. • Prevents damage to gear exceptional with this new model. M9 BAYONET & MARINE OKC3S M-7 BAYONET BAYONET LUG ADAPTER SCABBARD/CAMO BAYONET BL-M7 Retail ...... $29.95 BL-LUG Retail . . . . .$19.95 Retail ...... $110.00 BL-OKC3S Retail . . . .$149.95 Lightweight A1 Barrel

BL-M9UC = URBAN CAMO BL-M9DC = DESERT CAMO

Military production M-7 style bayonet. Parkerized finish. M-10 SCABBARD Available in two sizes. Fits over the barrel in BL-M7S Retail ...... $13.50 front of the sight. (2pc. construction) • Lightweight A1 Barrel .570” dia. BL-LUG • 8” blade, Blade .200” thick, 13-1/4” OAL • Heavy Barrel A2 .725” dia. BL-LUG-H • 7” blade, Blade .235” thick, 12-1/8” OAL • Phosphate non-reflective surface • Black oxide non-reflective surface • 1-3/4” Mission Serration • Milled sawteeth on back • Fits the EM-16, AP4 & A-15 BL-LUG-H Retail . . . . .$19.95 Textured thermoplastic nylon handle and scabbard. Dynaflex® handle reduces hand fatigue with Heavy Barrel A2 Equipped with a quick release military holster. positioning access point. Military production scabbard for the M-7 bayonet. Black plastic with tie straps. 64 REAR SIGHTS/ REAR APERTURES

REAR SIGHTS MANGONEL REAR SIGHT

TRIPLE LOW RAIL TRIPLE HIGH RAIL MANGONEL FLIP-UP REAR SIGHT DETACHABLE SIGHT DETACHABLE SIGHT

RS-LR Retail . . . . .$99.95 RS-HR Retail . . . . .$99.95 RS-MG Retail . . . .$114.95

MANGONEL SIGHT KIT Kit contains both the Front & Rear Mangonel sights. RS-MGK Retail . . . .$224.95 ACCESSORIES-REAR SIGHTS

U.S. PATENT # 6,732,467

A combination of a Tri-Rise riser with a rear A combination of a Tri-Rise riser with a rear Our patented “Mangonel” Rear Sight has two legs that flip up and down. Each leg is supported by each A2 adjustable sight assembly. Featuring A2 adjustable sight assembly. This High Rail other. Fast and accuracte sight acquistion. Excellent back-up, close quarter near sight assembly. Picatinny style rails on the top, left and right system is approximately 1/2” higher than the U.S. Patent No. 6,732,467. of the riser. This allows you to attach an optic Low Rail series. This allows you to attach an • Slimline and flat • Easy to raise and lower with positive lock in upright position to the top of the rail to be in coaxial line of optic to the top of the rail and other rail • Adjustable windage • Aluminum base with steel legs sight with the rear sight assembly and also mounted accessories such as flashlights and • 1/8” diameter aperture • Fixed elevation for simplicity (Std. A2 aperture height) allows you to attach other rail-mounted lasers. Made from 6000 Series heat-treated accessories to the side of the riser. Made aluminum. • Detachable assembly • Picatinny capable from 6000 Series heat-treated aluminum. DETACHABLE REAR SIGHT FLIP-UP REAR SIGHT WILSON COMBAT REAR FLIP-UP SIGHT

FT-RS Retail . . . . .$79.95 RS-MCTERS Retail . . . .$104.99 RS-WF Retail . . . .$179.95

Unique, new, flip-up sight for AR-style rifles is one of the most versatile available. Key features include: Manufactured by Midwest Industries. Attaches to various flattop upper receivers. Designed using the Picatinny rail system. Aluminum & rock-solid 2 bolt mounting system, bi-directional • 6061 aluminum steel construction. Height of sight will line up with standard front sights. Made by DPMS. adjustment for both windage and elevation, positive • Locking detent in the “up” position mount in the upward position, improved sight • 300 meters plus of elevation - Not 800. Not intended for long range. Backup iron sights only. • Windage knob same as standard AR, picture with a large aperture peep sight. The sight • LR-308 rifles ship with 6/3. NO ELEVATION ADJUSTMENT will mount on any standard Weaver or Picatinny rail. XS SIGHT SYSTEMS A-15 NM REAR HOODED TRIJICON AR15 GHOST RING APERTURE APERTURES APERTURE SIGHT NIGHT SIGHT SET

RS-GR Retail . . . . .$34.95 Retail ...... $14.95 AP-HA Retail . . . . .$14.95 FS-CP25 Retail . . . . .$79.95 Night Sight Set- Front & Rear Sight

Sight 3-Dot green front & rear Set night sights for M16/AR15. Installation tool included. Green lamps are warranted for 12 years from the date of manufacture. The brightness obtained from the tritium content is focused • Both apertures are bored on the same plane. through the sapphire lens to • Larger “Ghost ring aperture” has a .230 inner give the maximum possible dia. and a .070 wall thickness for greater light Features small long-range aperture with illumination. Sight blades transmission. Front standard A2 large short-range aperture. are machined from steel not • The smaller “precision aperture” has a .100 Sight cast. inner dia. with a .100 wall thickness which • UR-27-NM .046 and .200 dia. allows shooter to obtain a more precise zero. • UR-27A-NM .052 and .200 dia. New DPMS Hooded Aperture sight with a .040 • Drop-in replacement for A1 or A2 rear sights. diameter peep hole. 8620 steel, Also available is an aperture with both holes FS-CP25F Retail . . . . .$54.95 • Made of 416 Stainless steel, heat treated to undersized interchangeable with your A2 rear sight rockwell 20, blackened with a matte finish. • UR-27B-NM .040 and .030 dia. assembly. Night Sight - Front Sight Only

65 REAR SIGHTS/ SIGHT TOOLS

REAR SIGHTS DETACHABLE CARRYING HANDLE, LUGS DPMS NATIONAL MATCH REAR SIGHT DETACHABLE CARRYING HANDLE

UR-38NMA Retail . . . . .$99.95 FT-DCH Retail . . . . .$89.95 3, 4 Complete Assembly, Assembled & 5

Replaces standard rear sight to provide 1/4 2 min. windage and 1/4 min. elevation adjustments. Complete assembly includes 1 choice of aperature.

Fine Thread 6,7 Carry handle designed to attach to AR Flattop upper receivers allows use of iron sights. Easily installed RETAIL and removed. Made from 7075 forged aluminum. 1. UR-39-NM NM Rear Base w/Elev. Knob $74.95 2. UR-23-NM NM 1/4 Min. Windage Knob $14.95 DETACHABLE CARRYING HANDLE LUGS 3. UR-27-NM NM .046/.200Aperature $14.95 NATIONAL MATCH LUG SIGHT LUG 4. UR-27A-NM NM .052/.200 Aperature $14.95 5. UR-27B-NM NM .030/.040 Aperature $14.95 UR-29NMD Retail . . . . .$29.95 UR-29A Retail . . . . .$29.95 6. UR-34-NM NM Elevation Knob (steel) $14.95 7. UR-33A 6/3 Elevation Index Knob $6.95

A1 REAR SIGHT A2 REAR SIGHT A1/A2 FRONT A1 SIGHT ASSEMBLY ASSEMBLY SIGHT POST TOOL ADJUSTING TOOL

UR-21A Retail . . . . .$15.00 UR-21 Retail . . . . .$38.00 TL-9942 Retail ...... $9.95 TL-A1 Retail ...... $7.95 ACCESSORIES-REAR SIGHTS ACCESSORIES-REAR

RAPIDEX KNOB

UR-39A1 Retail ...... $9.00

Replaces A1 Rear Sight A2 Rear Sight Assembly Manufactured by SOG Armory. Used to install A1 Front & Rear Sight Adjusting Tool, Steel, 5 Windage Drum A1/A2 style adjustable front sights. prong. A2 SIGHT SIGHT ADJUSTING REAR SIGHT FRONT & REAR SIGHT ADJUSTING TOOL TOOL INSTALLATION TOOL PROTECTORS

TL-A2 Retail ...... $7.95 Retail ...... $7.95 TL-RST Retail . . . . .$34.95 FS-PC Retail . . . . .$16.95

TL-A3 Keychain Style A2 TL-A4 Keychain Style A1 Quickly snaps on and off. Protects front and rear For use with the EM-16A/A-15A2 rifles. Used sights. Made of hard plastic. Key Ring not included. Ready to install to install A2 style adjustable rear sights. • Price reflects both front and rear protectors. A2 Front Sight Adjusting Tool, 4 prong, Steel. on your keychain. • Manufactured by Fulton Armory

66 FRONT SIGHTS/ FRONT SIGHT POSTS FRONT SIGHTS MANGONEL FRONT SIGHT 3 RAIL HIVIZ AR-15 FRONT SIGHT FRONT SIGHT MANGONEL FLIP-UP FRONT SIGHT

FS-3R Retail . . . . .$99.95 FS-HIVIZ Retail . . . . .$26.75 FS-MG Retail . . . .$114.95

RS-MGK Retail . . . .$224.95

MANGONEL SIGHT KIT Kit contains both the Front & Rear

Mangonel sights. ACCESSORIES-FRONT SIGHTS U.S. PATENT

Rails at the 3, 6, & 9 o’clock positions have # 6,732,467 been machined into the investment cast 4140 steel front sight body and feature four slots per The patented "Mangonel" Front Flip Up Sight uses an aluminum base with steel legs and a steel rail. A machined sling loop is located in the rear clamp for durability and strength. This sight unit uses an A2 front sight. A large thumb knob is easily support leg of the sight. • Will fit A1 and A2 model rifles with standard manipulated to loosen or tighten the clamp. The sight is designed to fit on the MIL-STD-1913 Picatinny Retaining the same height as the standard A2 A frame assembly accessory rail. The front sight has three positions: down (1st position), 2nd position for use on gas front sight, this manganese phosphate • Bright fiber optic for easy aiming blocks, and a 3rd position when both the front sight and the rear sight is on the same rail. The whole finished sight is held to the barrel with two set • Overmolded resin protects LitePipe from sight assembly weighs only 3.8 ounces. It is a good companion for the Eotech Holographic Sight and screws. The 3-Rail front sight sports a .750 damage other optics. U.S. Patent No. 6,732,467. diameter barrel opening, for all heavy barrels • Does not require gunsmith for installation and AP4 contour barrels. DETACHABLE BULL BARREL JP ENTERPRISES SHORT PRI QUICK RELEASE FRONT SIGHT BASE FRONT SIGHT BASE RANGE TACTICAL SIGHT FLIP-UP FRONT SIGHT

FS-DET-S Retail . . . . .$54.95 BL-18B Retail . . . . .$39.95 JP-SRTS Retail . . . .$119.95 FS-PRI Retail . . . .$179.95

ia. .936 D

The JP Short Range Tactical Sight is the solution “Steel, not aluminum!” for supplementing a long range optic or precision Quick detachable front sight for Picatinny or DPMS has developed and manufactured new iron sight set-up where fast, reflexive short range Weaver-style rail front gas blocks. Uses front sight with a .936 diameter hole vs. the engagement from point blank to 35-40 yards is a standard A2 sight components (included). standard A1 A2 sight with .750 diameter hole. necessity. The JP-SRTS is adjustable for point of Made from 4140 chrome-moly steel with a “8620 Steel” impact and is quick detachable on the JP Tactical thumb screw attachment. Includes post, • Post, Detent and Spring Not Included Rail Accessory. Supplied with 6 colored front sight PRI's Easy detach front flip up sight, for barrel swith detent and spring. • BULL BARRELS AND OTHERS inserts. a diameter of .750 YANKEE HILL FRONT YANKEE HILL FRONT XS SIGHT SYSTEMS MEPROLIGHT TRITIUM FLIP SIGHT, GAS BLOCK FLIP SIGHT, FOREARM 24/7 NIGHT SIGHT NIGHT SIGHTS

FS-YHM-9584 Retail . . .$71.95 FS-YHM-9627 Retail . . .$71.95 FS-247 Retail . . . . .$60.00 ML1160 Retail . . . . .$79.95 A-15/EM-16 & A2 Front Sight Set

ML-1160 ML-116

A-15/EM-16 & A2 Front Sight Only • Manufactured by Yankee Hill Machine • Manufactured by Yankee Hill Machine Company Company ML116 Retail . . . . .$34.95 • Steel front flip sight for gas block mount • Steel front flip sight for forearm mount “The Low-light Advantage” • Accepts standard AR front sight posts • Accepts standard AR front sight posts XS Sight Systems 24/7 Tritium Stripe Front • 12 Year Warranty. • Locks in the deployed positions • Locks in the deployed positions Sight Post. • With Tritium

67 KNS FRONT SIGHT POSTS ADDITIONAL SIGHT POSTS FRONT SIGHT POSTS

.072 SQUARE POST .072 BALL TIP POST STANDARD SIGHT W/ EXTENDED FRONT SIGHT POST - SQUARE FS-KNS-2 FS-KNS-5 DUPLEX CROSSHAIR Retail . . . .$7.50 Retail . . . .$7.50 FS-KNS-9 FS-08 Retail . . .$35.95 Retail . . .$14.95

Extended length post for detachable carry handle & detachable rear sight assembly. KNS Precision A2 Front Sight Post. Approximately .030 longer post than the KNS Precision A2 Front Sight Post. KNS Precision A2 Front Sight Post. Standard sight body w/ duplex crosshair. standard A2 front sight post (.070 wide). .072 diameter, square post. .072 diameter, round/ball tip post. For precision shot placement. Four sides, square.

.052 SQUARE POST .052 BALL TIP POST HOODED SIGHT W/ NATIONAL MATCH/DCM STANDARD CROSSHAIR A1 FRONT SIGHT POST FS-KNS-3 FS-KNS-6 FS-KNS-10 NM-FS Retail . . . .$7.50 Retail . . . .$7.50 Retail . . .$39.95 Retail . . . .$9.95

“Round Post”

KNS Precision A2 Front Sight Post. KNS Precision A2 Front Sight Post. KNS Precision A2 Front Sight Post. Hooded sight body w/ standard This front sight post has a thinner front blade. .052 diameter, square post. .052 diameter, round/ball tip post. crosshair. For precision shot placement. Round. Approx. .050 diameter.

.034 SQUARE POST .034 BALL TIP POST HOODED SIGHT W/ NATIONAL MATCH/DCM FS-KNS-4 FS-KNS-7 DUPLEX CROSSHAIR FRONT SIGHT POST ACCESSORIES-FRONT SIGHT POSTS ACCESSORIES-FRONT Retail . . . .$7.50 Retail . . . .$7.50 FS-KNS-11 FS-DCM Retail . . .$39.95 Retail . . .$12.95

“DCM”

KNS Precision A2 Front Sight Post. Four sided square post .050 wide. KNS Precision A2 Front Sight Post. KNS Precision A2 Front Sight Post. Hooded sight body w/ duplex crosshair. Interchangeable with standard AR sights. .034 diameter, square post. .034 diameter, round/ball tip post. For precision shot placement. Steel & phosphated.

FRONT SIGHT “V”/INVERTED “V” SIGHTLINK MIL SPEC “LEVANG” APERTURE ASSORTMENT PACK FRONT SIGHT POST FIBER OPTIC SIGHT FRONT SIGHT POST FS-KNS-1 FS-KNS-8 FS-SL-MIL FS-07 Retail . . .$32.00 Retail . . . .$7.50 Retail . . .$49.95 Retail . . .$24.95

“V”

.072 .052 .034 .072 .052 .034

KNS Precision A2 Front Sight Assortment Pack. Includes seven front sight posts in all. KNS Precision A2 Front Sight Post. Sightlink Mil Spec Fiber Optic Front Sight. Replaces A1 or A2 Post 3 square posts (.072, .052, .034), 3 90 degree turn of sight changes sight .070” Mil Spec - .040” Rod. round/ball tip posts (.072, .052, .034) and profile from a “v” shape to an inverted one “V” sight post. A Great Value! “v” shape.

68 .308 COMPENSATORS MUZZLE BRAKES DNTC COMPENSATOR DNTC COMPENSATOR DNTC COMPENSATOR DNTC COMPENSATOR BLACK BLACK/STAINLESS STAINLESS BLASTED/STAINLESS

308-BL-DNTC Retail . . . .$69.95 308-BL-DNTC-BS Retail $124.95 308-BL-DNTC-SS Retail .$112.50 308-BL-DNTC-MB Retail $110.25 ACCESSORIES-COMPENSATORS

The 308 version of the DNTC Compensator The compensator is machined out of solid stock The 308 version of the DNTC Compensator The 308 version of the DNTC Compensator follows in the footsteps of its .223 counterpart. stainless steel with an oversized outside follows in the footsteps of its .223 counterpart. follows in the footsteps of its .223 counterpart. Allowing the shooter to stay on target round diameter. The entire compensator is then Allowing the shooter to stay on target round Allowing the shooter to stay on target round after after round even using the powerful .308 blackened with an oxide process and then after round even using the powerful .308 round. round even using the powerful .308 round. round. turned down on a lathe to remove the far outside surface.

.308 PANTHER .308 M60-STYLE 308 MICULEK .308 PANTHER FLASH HIDER FLASH HIDER COMPENSATOR FLASH HIDER

308-BL-YH Retail . . . . .$44.95 308-BL-M60 Retail . . . . .$29.95 308-BL-MIC Retail . . . .$64.99 308-BL-YH Retail . . . . .$44.95

Six opposing side ports direct gasses outward Precision machined, phosphate coated. This • Military/M60 Style Flash Hider, .308 Cal. Rifles reducing muzzle jump and giving the LR-308’s a Precision machined, phosphate coated. This suppressor eliminates flash. Excellent • 4140 Steel reduced felt recoil similar to that of an AP4 suppressor eliminates flash. Excellent performance. 5/8 - 24 Threads • Precision Machined Carbine. Made of 4140 steel with a manganese performance. 5/8 - 24 Threads Made for the 308 Rifles! • Heat Treated, Manganese Phosphate Coated phosphated finish, this compensator measures Made for the 308 Rifles! • 5/8 - 24 Threads 15/16” in diameter and 2 3/8” in length. • Manufactured by DPMS 5/8 - 24 Threads 308 SCORE HIGH MUZZLE BRAKE 308 TROMIX SHARK MUZZLE BRAKE The Score High Muzzle Break has no ports on the top or the bottom, it only has ports on each side giving total control with automatic and semi-automatic fire. 308-BL-TSB Retail . . . . .$85.00 Fits .875” OD. 5/8 x 24 TPI. This muzzle brake features six 30 degree swept back gill-type side ports as well as two vertical ports to control recoil as well as muzzle 308-BL-SH Retail . . . .$90.00 rise. Threaded 5/8-24. Sporting six "persuader points" this brake can also be used for door breaching and less then lethal persuasion activities. Not intended for sustained full auto applications. NOVESKE KX3 .308 FLASH SUPPRESSOR 7.62 x 39 COMPENSATOR A2 COMPENSATOR FOR 7.62x39 308-BL-KX3 Retail . .$125.00 Heat-Treated CM Construction Phosphate Finish A2 compensator with 1/2 x 36 thread for Hartford Horsey logo 7.62x39 barrels. BL-06-36 Retail . . . . .$19.95 The Noveske KX3 Flash Suppressor is intended for use on .308 Rifles. It is the lat- Will not fit DPMS barrels. est refinement of the KFH concept. All KX3s (Use BL-06-A2) are individually serial numbered for quality control. The 5/8x24 threaded KX3s are available with or without the Fire Breathing Pig image.

The Noveske KX3 is classified as a flash suppressor by the BATF FTB.

69 COMPENSATORS MUZZLE BRAKES PANTHER DPMS PANTHER A2 COMPENSATOR 223 MICULEK COMPENSATOR COMPENSATOR COMPENSATOR

BL-06C Retail ...... $21.95 BL-06D Retail ...... $21.95 BL-06-A2 Retail ...... $8.00 BL-MIC Retail . . . . .$49.99

STEEL! Six opposing side ports direct gasses outward Modified A2 Compensator. Gasses are diverted Modified A2 Compensator. Muzzle rise is No slots on bottom, Peel Washer required. to reduce muzzle jump. Includes jam nut for through two sets of five holes in upper sides of dampened by three slots and four holes 1/2 - 28 Threads indexing. Designed by Jerry Miculek compensator for improved control. across the top of the compensator.

BRANSON “LEVANG” LINEAR BENNIE COOLEY BENNIE COOLEY COMPENSATOR COMPENSATOR COMPENSATOR, MATTE COMPENSATOR, SST BL-21 Retail ...... $29.95 GS-01 Retail ...... $39.95 BL-JPTRE-2 Retail . . . .$89.95 BL-JPTRE-2S Retail . . . .$89.95 Standard Barrels Standard Barrels

Bennie Cooley Tactical Recoil Eliminator Bennie Cooley Tactical Recoil Eliminator ACCESSORIES-COMPENSATORS • Matte Black Finish • Stainless Steel • 1/2x28 tpi pre ban • 1/2x28 tpi pre ban Replacement for the A-15/EM-16 with no vents on the bottom. Gives better control and, when Designed to reduce a common problem with shooting prone, there is less dust and dirt blown compensators: too much noise directed BL-JPTRE-512B Retail . .$99.95 BL-JPTRE-512S Retail . .$99.95 up by the muzzle blast. Looks like original toward the shooter. Reduces muzzle jump equipment and is priced right. Front end is without hurting your ears. Bull Barrels Bull Barrels blocked for muzzle compensation. DNTC COMPENSATOR DNTC COMPENSATOR DNTC COMPENSATOR MUZZLE STABLIZER/ BLACK/STAINLESS STAINLESS RECOIL REDUCER

BL-DNTC Retail . . . . .$69.95 BL-DNTC-BS Retail . . . .$124.95 BL-DNTC-SS Retail . . . . .$99.95 BL-KRINK Retail . . . .$149.95

A highly effective recoil compensator for the the AR-15 based rifles with 1/2-28 threads. The compensator is machined out of solid stock The DNTC Compensator, designed in New Product From CMMG! The DNTC Compensator, designed in stainless steel with an over-sized outside collaboration with professional shooter Dave Features include one piece housing threaded collaboration with professional shooter Dave diameter. The entire compensator is then Neth, does its job without the harsh blast of for 1/2 x 28 TPI. Removable cone, retainer Neth, does its job without the harsh blast of blackened with an oxide process and then other effective compensators on the market. In spring and cap with rebar cutter. The one piece other compensators on the market. In addition, turned down on a lathe to remove the far outside addition, the blast chamber design has been housing eliminates the need for thread adapters the blast chamber design has been shown to surface leaving most of the compensator black shown to actually increase the gas pressure in that are prone to gas leakage. The primary actually increase the gas pressure in your with only the outside surface a brushed stainless your weapon to assist in the functionality of your weapon to assist in the functionality of your gas steel surface. gas system. function of the Krink Hider is to provide greater system. These parts are 100% American made. back pressure for short barreled weapons.

70 BRAKES, FLASH HIDERS MUZZLE ACCESSORIES MUZZLE BRAKES

FABIO MUZZLE TROMIX SHARK .223 SCORE HIGH JP ENTERPRISES STABLIZERS MUZZLE BRAKE MUZZLE BRAKE MUZZLE BRAKE

BL-29 Retail ...... $39.95 BL-TSB Retail . . . . .$85.00 BL-SH Retail . . . . .$90.00 BL-JPRE-2 Retail . . . . .$99.95 Matte Finish

EM-16/A-15 Reduces recoil up to 44%, gives better control for full auto fire. ACCESSORIES-FLASH HIDERS

BL-23 Retail . . . . .$39.95

This muzzle brake features six 30 degree swept back gill-type side ports as well as two vertical ports to control recoil as well as muzzle rise. Threaded 1/2-28 22 caliber, M14x1.0LH 30 caliber, and 5/8-24 30 caliber, the Tromix The Score High Muzzle Brake has no ports on Virtually hand-made from 4130 aircraft grade Shark Brake can be used on a multitude of rifle the top or the bottom, it only has four (4) large structural steel tubing. Even in the most platforms. Sporting six "persuader points" this ports on each side giving total control with demanding continuous full auto applications or Fabio DTA Mil Brake brake can also be used for door breaching and automatic and semi-automatic fire. Fits .750” over bore wild cat rifles, structural integrity will be EM-16/A-15 reduces recoil up to 44%, gives less then lethal persuasion activities. Not O.D. 1/2 x 28 TPI. maintained. better control for full auto fire. intended for sustained full auto applications. FLASH HIDERS SINCLAIR A-15 SIGHT 3 PRONG FLASH HIDER A1 FLASH HIDER 5 1/2” FLASH HIDERS & MUZZLE COVERS

BL-3P Retail ...... $9.95 BL-05-A1 Retail ...... $8.00 Retail ...... $19.95 FSC-01Y Retail ...... $15.95

BL-20A

These durable vinyl covers will protect your rear and front sights from being moved or damaged while the muzzle guard will keep dirt out of your barrel and help prevent damage to your barrel crown. BL-20 PLASTIC MUZZLE CAP

BL-20 5 1/2” Flash Hider (used on Carbine or MZ-CAP-R Retail ...... $1.00 other threaded barrels) 1/2 - 28 Threads 1/2 - 28 Threads BL-20A Slides over 16” barrel to give it the ap 3 Prong Slots all around pearance of a carbine barrel. Fits pre ban threaded barrels only.

PANTHER SMITH VORTEX NOVESKE FLASH FLASH HIDER FLASH HIDER SUPPRESSOR Slides over the A-15 Compensator. Protects BL-YH Retail . . . . .$24.95 BL-22 Retail . . . . .$50.00 BL-KX3 Retail . . . .$125.00 bore from the elements. BARREL BOOT

Retail ...... $9.99 Available in three colors: MZ-BB = BLACK MZ-BB-OD = OD GREEN MZ-BB-C = CAMO

The Noveske KX3 Flash Suppressor is intended for use on Short Barreled Rifles. It is the latest The new G6A2 model features a patented refinement of the KFH concept. It is lighter than 15-degree helix, guaranteeing a complete Precision machined, phosphate coated. This the KFH by 1.5 ounces, and outside dimensions propellant burn and negligible flash, unlike the suppressor eliminates flash. Excellent remain the same. All KX3s are individually serial standard issue closed-end “bird cage” unit or performance. 1/2 - 28 Threads numbered for quality control. The 1/2x28 Made by Scopecoat competing straight-flute designs. Right hand threaded KX3s are available with or without the The Barrel Boot keeps dust, dirt, etc. out of your helical flutes will not loosen under sustained fire. Fire Breathing Pig image. barrel. Sized for the AR Rifle.

71 LOWER ASSEMBLIES

* Combining upper barrel assembly with the lower receiver assembly will result in 11% additional federal excise tax and overhead charge. FORGED RECEIVER/ASSEMBLY “RECEIVER RUG” FORGED LOWER RECEIVER DPMS “RECEIVER RUG” FOR AR LOWERS!

LR-05FF Retail . . . .$184.95 LR-RR Retail ...... $3.95 Non-Molded Receiver Rug, For Adjustable Triggers

• Aircraft aluminum alloy tempered The to T6 condition • Hardcoat anodized per Mil-A-8625 “Receiver Rug” • Satisfaction guaranteed Patent Pending • FFL required for purchase LR-RRM Retail ...... $8.95 Molded Receiver Rug, For Mil-Spec Triggers FORGED LOWER RECEIVER ASSEMBLY Stop Primers From Jamming Your Trigger With the “Receiver Rug”! DPMS unveils the patent applied for, “Receiver Rug”, a rubber molded, three-dimensional gasket that blocks blown primers and other debris from wedging under the trigger action. Designed for easy installation into the bottom of the lower receiver, this clever little device is a must have for competition • FFL required for purchase shooters, 3-gunners, military and law enforcement personnel because it keeps you in the fight! • Assemblies include choice of Mil-Spec A2 Buttstock LOWER RECEIVER ASSEMBLIES Assembly or AP4 Collapsible Stock, A2 Pistol Grip and DPMS Lower EXTRUDED .308 LOWER RECEIVER Assembled Unassembled w/.308 LOWER PARTS KIT INSTALLED

Retail ...... $362.95 LR-05UAF Retail . . . .$332.95 308- LR-05LP Retail . . . .$490.95 LR-05ASF = A2 Buttstock Assembly LR-05AP4 = AP4 Stock Assembly LOWER ASSEMBLIES LOWER

SINGLE SHOT RECEIVER/ASSEMBLY

CALIFORNIA SINGLE SHOT LOWER RECEIVER Includes the following lower receiver parts: • Pistol Grip • Bolt Catch Buffer • .308 Front Pivot Pin • Selector Detent LR-05V Retail . . . .$184.95 • Trigger • Take Down Detent • Hammer Spring • Hammer Pin • Hammer • Bolt Catch • Trigger Spring • Trigger Pin • Disconnector • Magazine Catch Spring • Pistol Grip Screw • .308 Take Down Pin • Made from 7075-T6 forging • Selector • .308 Bolt Catch Screw • Pistol Grip Lock • Buffer Retainer Pin • No magazine well • Bolt Catch Spring • Magazine Catch Button Washer • Buffer Retainer Spring • Perfect for a single shot • Legal in California • Detent Spring • Magazine Catch • Selector Spring • Disconnector Spring • Post Ban • Patent # 5,452,534 FORGED AR LOWER RECEIVER • FFL required for purchase w/AR LOWER PARTS KIT INSTALLED • Assemblies include Mil-Spec A2 Buttstock Assembly or AP4 Collapsible Stock, A2 Pistol Grip & DPMS Lowers LR-05LP Retail . . . .$244.95 • FFL required for purchase

• Assemblies include choice of Mil-Spec A2 Buttstock Assembly or AP4 Collapsible Stock, A2 Pistol Grip and DPMS Lower

CALIFORNIA SINGLE SHOT Includes the following lower receiver parts: LOWER RECEIVER ASSEMBLY • Pistol Grip • Bolt Catch Buffer • Front Pivot Pin • Selector Detent • Trigger • Take Down Detent • Hammer Spring • Hammer Pin Unassembled Assembled • Hammer • Bolt Catch • Trigger Spring • Trigger Pin • Disconnector • Magazine Catch Spring • Pistol Grip Screw • Take Down Pin LR-05VUA Retail . . . .$337.95 LR-05VAS Retail . . . .$372.95 • Selector • Bolt Catch Roll Pin • Pistol Grip Lock • Buffer Retainer Pin • Bolt Catch Spring • Magazine Catch Button Washer • Buffer Retainer Spring • Detent Spring • Magazine Catch • Selector Spring • Disconnector Spring

* Combining upper barrel assembly with the lower receiver * Combining upper barrel assembly with the lower receiver assembly will result in 11% additional federal excise tax and assembly will result in 11% additional federal excise tax and overhead charge. overhead charge. 72 LOWER RECEIVER PARTS & ACCESSORIES

AR15 AND LR-308 LOWER RECEIVER PARTS KITS LOWER RECEIVER PARTS KIT .308 LOWER RECEIVER PARTS KIT

LRPK-1 Retail . . . . .$59.00 LRPK-16 Retail . . . . .$59.00 LRPK-308 Retail . . . . .$84.99 A-15 Lower Receiver Parts Kit EM-16 Lower Receiver Parts Kit .308 Lower Receiver Parts Kit

LRPK-LP Retail . . . .$129.95 A-15 Kit, LARGE PIN

Fits LR-308 Line of Rifles ONLY! ACCESSORIES-LOWERS

Includes the following lower receiver parts: Includes the following lower receiver parts: • Pistol Grip • Bolt Catch Buffer • Front Pivot Pin • Selector Detent • Pistol Grip • Bolt Catch Buffer • .308 Front Pivot Pin • Selector Detent • Trigger • Take Down Detent • Hammer Spring • Hammer Pin • Trigger • Take Down Detent • Hammer Spring • Hammer Pin • Hammer • Bolt Catch • Trigger Spring • Trigger Pin • Hammer • Bolt Catch • Trigger Spring • Trigger Pin • Disconnector • Magazine Catch Spring • Pistol Grip Screw • Take Down Pin • Disconnector • Magazine Catch Spring • Pistol Grip Screw • .308 Take Down Pin • Selector • Bolt Catch Roll Pin • Pistol Grip Lock • Buffer Retainer Pin • Selector • .308 Bolt Catch Screw • Pistol Grip Lock • Buffer Retainer Pin • Bolt Catch Spring • Magazine Catch Button Washer • Buffer Retainer Spring • Bolt Catch Spring • Magazine Catch Button Washer • Buffer Retainer Spring • Detent Spring • Magazine Catch • Selector Spring • Disconnector Spring • Detent Spring • Magazine Catch • Selector Spring • Disconnector Spring AMBI SAFETY OVERSIZED SAFETY NORGON AMBI-CATCH TACTICAL BOLT CATCH SELECTOR SWITCH SELECTOR SWITCH (AMBIDEXTROUS MAG CATCH) By DPMS

LR-08B Retail . . . . .$29.95 LR-08D Retail . . . . .$29.95 LR-13N Retail . . . . .$85.95 LR-11T Retail . . . . .$13.95

Does Not Work In .308 Rifles! This Bolt Catch has a larger bolt release pad that The Norgon, LLC Ambi-Catch™ is a patented is much easier to locate and activate. Has a lower Replace your right handed safety with our new "drop-in" replacement of the original magazine extended pad, which is used to hold the bolt carri- catch for M16A2 Rifles, M4 Carbines, AR15 three piece (with screw) doublehead selector Oversized, extended selector for easy er back when the magazine is not installed switch to safe or fire from either side of the manipulation. Works with semi-auto firearms Rifles and other firearms that use an M16 type (Excellent for tactical training when the magazine receiver. Will not fit the EM-16. only. magazine. must be removed) Easy to install by removing the roll pin and installing the new roll pin, which is OVERSIZED, CHECKERED included. Installation at DPMS is also available. AMBIDEXTROUS ARREDONDO Will Not Work with the Hi-Rider Upper Receiver. MAG RELEASE MAG RELEASE BUTTON MAG WELL THE GAPPER MB-AM Retail . . . . .$97.50 MB-OS Retail . . . . .$29.99 Retail ...... $40.00 Available in two colors: MA-WELL = BLACK MA-WELL-T = TAN GAP-1 Retail ...... $3.95

This is the practical way to release your Easier to operate with your trigger finger. magazine from either your left or right hand. Replaces the standard magazine catch, Designed to fill that void in front of the pistol Ideal for quick reloads while keeping your rifle spring and button. grip up to the rear of the trigger guard. Made with solvent resistant Santoprene. Clips in on target. By Power Custom • Button .625” in diameter easily. A friction fit holds it in place. No more • Right side button .625” in diameter • By Power Custom Oversized, beveled mag well allows quick mag banged up knuckles. Patent pending. • Left side lever .750”x6.25” changes without having to visually “find” your mag well. A must have for the competition Caution: Unload weapon before Does Not Work In The Does Not Work In The shooter. installation. LR-308 Line of Rifles! LR-308 Line of Rifles!

73 TRIGGERS, TRIGGER PINS, SPRINGS ARREDONDO ARREDONDO MAG WELL, ARREDONDO DROP-IN SINGLE STAGE MAG RELEASE SAFETY PLUG AR-MAG YOKE TRIGGER, CURVED

MA-MRB Retail ...... $25.00 MA-SPLG Retail ...... $15.00 Retail ...... $15.00 TR-C1C Retail . . . . .$189.00 Available in two colors: MA-MGYB = BLACK MA-MGYT = TAN

Difficult to miss. Two piece design. No gun Spring loaded auto eject, simply press the mag The Mag Yoke fits the AR-15/HK metal Chip McCormick Single Stage Curved Trigger. smithing required. Simply replaces the factory release. Bolt carrier must be in the open magazines. Set of two. Designed to work with Self-contained trigger, hammer, disconnector installed button. position to insert. Dust cover can be closed the AR-Mag Well and springs drops into the receiver. Ready to with the plug in place. go with anti-walk pins. WILL NOT WORK WITH THE LR-308 LINE OF RIFLES. JEWELL TRIGGER JARD TWO-STAGE MAGPUL FOR THE A-15 SINGLE-STAGE TRIGGER TRIGGER GROUP TRIGGER GUARD LR-JT Retail . . . . .$275.00 TR-JA Retail . . . . .$149.95 TR-TS Retail . . . . .$129.95 LR-MAG015 Retail . . . . .$21.95 ACCESSORIES-TRIGGERS

The JARD single stage trigger utilizes a redesigned hammer/trigger engagement for a smoother, lighter trigger pull. Comes with spring • Finally a two-stage trigger that’s easy to Magpul Enhanced EM-16 Trigger Guard! A drop kit for 3 lb. pull and is adjustable for take-up and install and use in replacement for the standard A-15/EM-16. overtravel. Precision machined and EDM cut • Pull weight: 1st stage: 2 lbs Patent Pending design allows for gloved use from bar stock. Black finish. WILL NOT WORK 2nd stage: 5 3/4 lbs. without having to fold down guard. Jewell Trigger for the A-15, includes the hammer. WITH THE LR-308 LINE OF RIFLES. • Detailed instructions included JP ADJUSTABLE TRIGGER ASSEMBLY A-15 ANTI-WALK PINS WOLFF EXTRA POWER HAMMER SPRING

LR-39 Retail . . . . .$124.95 LR-39A Retail . . . .$129.95 LR-AW Retail . .$5.00/per set WF-SP-4 Retail ...... $4.99 For Standard Lowers For Hartford Horsey logo, Sporter and 1 SPRING Match Target

WF-SP-43 Retail . . . . .$13.99 3 PACK OF SPRINGS

WF-SP-410 Retail . . . . .$29.99 10 PACK OF SPRINGS

These replace original hammer/trigger pins. An A-15 fire control system from JP Enterprises, Inc. features re-engineered, precision ground They extend past the receiver on each side and sear geometry combined with over travel and engagement adjustments in a nearly drop-in kit to are retained by special retaining clips for a give an extremely refined trigger at an affordable price. 3 lbs. more positive lock. Two pins and clips per set.

74 KNS PINS, MISC. PINS & OFFSET PARTS

KNS PINS MISC. PINS OFFSET PARTS

NON-ROTATIONAL NON-ROTATIONAL OVERSIZE TAPER OFFSET BUSHING M-16 SEAR PIN TRIGGER GROUP PINS PIN LR-KNS-1 LR-KNS-2 FS-06L LR-OB Retail . . .$29.95 Retail . . .$32.95 Retail . . . .$0.95 Retail . . . .$3.00 .154 Dia. Pins

Special anti-spin/anti-creep retainers prevent all Oversize front sight taper pin for wear to your receiver's trigger and hammer pin re-aligning and replacing front sight bases. holes. Stainless steel pins, black oxide end screws. Installation tool and allen wrenches

included. PINS ACCESSORIES-MISC. JP AR REAR Adapts large hole Hartford Horsey uppers KNS Precision M-16 Non Rotating Sear Pin. TENSIONING PIN front pivot pin diameter to small hole lowers Phosphated Finish. LR-KNS-3 pin diameter. LR-TP Retail . . .$32.95 FIRING PIN .170 Dia. Pins Retail . . .$39.95 OFFSET SCREW & NUT RETAINING PIN BT-KNS16 LR-OSN Retail . . . .$7.95 Retail . . . .$3.00 STAINLESS STEEL Replaces rear take down pin to eliminate TRIGGER GROUP PINS play between receivers. Three piece construction. Easy to Install. LR-KNS-4 JP .308 REAR Retail . . . .$4.95 TENSIONING PIN .154 Dia. Pins 308-LR-TP Retail . . .$39.95 Adapts Military .250” uppers front hole KNS CNC Machined Steel Firing Pin KNS Stainless Steel Trigger Group Pins. diameter to lowers with 5/16” front pivot pin Retaining Pin. Guaranteed Forever by KNS! .Set of 2. hole diameter.

LR-KNS-5 PIVOT PIN Replaces rear take down pin to eliminate OFFSET SCREW & NUT - Retail . . . .$4.95 play between receivers. Three piece W/ SLING STUD construction. 2 PC. .170 Dia. Pins Easy to Install. LR-KNS-6 HARTFORD HORSEY LR-OS2 Retail . . .$13.95 LOGO SCREW & PIN SET Retail . . . .$3.95 .250 Dia. Pins LR-CP PUSH BUTTON Retail . . . .$7.00 PIVOT PINS LR-KNS-250PP KNS Front Pivot Pin w/Sling Stud. Opposite side has a screw to prevent accidental pin Retail . . .$13.50 Offset screw and nut that is used to convert removal by the sling. large hole (.312 dia.) lower receivers with the .250 Dia. Pin small hole uppers (.250 dia). The steel offset Standard “Original” replacement screw and screw has a larger screw head and a screw LR-KNS-7 pin for older Hartford Horsey logo’s with a driver nut head as well. Similar to the Colt® side pin diameter of .312” (Approx. 5/16”) Retail . . .$13.95 2 pc. screw system.

.315 Dia. Pin These pivot pins have a spring loaded push button. When pushed, the stainless steel keeper A-15 QUICK-TAKE ACCU-WEDGE pins retract for easy pin removal. The pivot pins DOWN PIN are designed to eliminate wear in and around the hole caused by pins with spring loaded balls. LR-QT ACU-01 Retail . . . .$6.00 Retail .$5.95/EA. LR-KNS-315PP .312” dia. PUSH BUTTON Retail . . .$13.50 TAKE DOWN PIN .315 Dia. Pin LR-KNS-250TD LR-QT-S Retail . . .$13.50 Retail . . . .$7.00 .250 Dia. Pins .250” dia. Drop ACCU-Wedge in rear of lower receiver. KNS Take Down Pin has a spring loaded push Close upper receiver, squeeze and push pin in button. When pushed, the stainless steel keeper place. pins retract for easy pin removal. The pin is Accu-Wedge buffers A-15/EM-16 cycling designed to eliminate wear in and around the Specially designed front receiver pin with ball system to reduce wear and provide a more hole caused by pins with spring loaded balls. detent allows fast disassembly and assembly. solid feel by eliminating play in receiver. Easy Made from steel. Replaces screw pin on to install, requires no weapon modifications. Hartford Horsey logo lower receivers for easy take-down. 75 .308, .300, 7.62mm, 6.8mm MAGAZINES & PARTS .308, .260, .243 MAGAZINES AND ACCESSORIES

.308 FOLLOWER MA-3084 Retail . . . . .$44.95 MA-3081 Retail . . . . .$44.95 MA-3082 Retail . . . . .$44.95

308-MA-15 Retail . . . . .$15.00

4 ROUND 10 ROUND 19 ROUND

Attention: High capacity magazines cannot be sold to the following states: These 4, 10 and 19 round steel magazines for the Panther™ Long Range Rifles answer the customer’s demand for durable and dependable magazines. California, Hawaii, Massachusetts, New Made of heat-treated 1050 steel with a manganese phosphated finish, these steel magazines will withstand the rigors of the hunt. A steel floor plate, spring Jersey and New York. and plastic follower complete these tough and durable magazines from DPMS. ARREDONDO MAGPUL FOR MAG CINCH FOR 7.62mm MAGAZINE LR-308 MAG BASE LR-308 MAGAZINES .308 MAGAZINE COMP MAG™ MAGAZINE 10 ROUND Retail ...... $10.00 308-MAG002 Retail . . . .$3.39 MA-MC308 Retail . . .$19.95 Available in two colors: 308-MA-MBB = BLACK MA-04 Retail . . . . .$21.45 308-MA-MBT = TAN

ACCESSORIES-MAGAZINES Provides unsurpassed speed and control Fits metal LR-308 magazines. Use as a base for during high stress, tactical magazine changes The Mag Cinch System allows anyone with a prone shooting, perfect mono-pod. Aggressive with its loop and recessed rough gripping need for high ammo capacity to carry two grip design. Can also be used over ammo to surface. Installs over the end of a magazine for magazines with their rifle. This mag cinch fits • For the A-15 Family by MWG COMPANY keep dirt from entering the magazines. Great for quick, tactile (touch) changing of a magazine. models LR-308, AR-10, SR-25. Does not fit the • 7.62 x 39mm not .223 the tactical/limited class. Fits LR-308 steel magazines! FN/FAL! Magazines Not Included! .300 SAUM MAGAZINE AND FOLLOWER 6.8mm MAGAZINES

.300 SAUM MAGAZINE .300 SAUM FOLLOWER 4 ROUND MA-68-5 Retail . . . . .$46.00 MA-68-15 Retail . . . . .$42.00

MA-300 Retail . . . . .$69.95 MA-300F Retail . . . . .$24.95

6.8mm SPC magazine by Precision Reflex. 5 Rd. 6.8mm SPC magazine by Precision Reflex. 15 Rd.

MA-68-10 Retail . . . . .$41.00 MA-68-25 Retail . . . . .$43.00

This 4 round steel magazine for the Panther™ Follower for .300 SAUM magazine. This LR-30S is made of heat-treated 1050 steel with magazine follower is made from white, high a manganese phosphated finish. A steel floor impact polymer and fits the MA-300 Magazine. plate, spring and plastic follower complete this tough .30 caliber magazine from DPMS. 6.8mm SPC magazine by Precision Reflex. 10 Rd. 6.8mm SPC magazine by PRI. 25 Rd.

76 5.56/.223 CAL. MAGAZINES A-15 MAGAZINE A-15 MAGAZINE A-15 MAGAZINE, 45 ROUND 20 ROUND 30 ROUND

MA-08 Retail ...... $19.95 MA-02L Retail ...... $19.95 MA-45 Retail ...... $89.95 STRAIGHT, GRAY, MIL-SPEC GRAY, MIL-SPEC BLACK TEFLON 45 RD. ACCESSORIES-MAGAZINES

• 20 round magazine for the A-15. • 30 round magazine for the A-15. • Stamped out of 0.040” thick 6000-series aluminum, heat treated to the T6 condition • Hard coat anodized matte black per MIL-A-8525, Type 3, Class 2 and Teflon® coated. MA-20 Retail ...... $12.00 MA-02 Retail ...... $12.00 • Fabricated from two 30-round box magazines • Uses a standard follower and floor plate CURVED, BLACK TEFLON BLACK TEFLON The new 45 round magazine from DPMS works in any firearm that readily accepts EM-16 magazines and is function fired prior to shipping! A-15 MAGAZINE A-15 MAGAZINE A-15 BETA MAGAZINE, 100 ROUND 10 ROUND 90 ROUND MWG MCMP06 Retail . . . . .$259.95 MA-PP Retail ...... $19.95 MA-90 Retail . . . . .$139.95 BLACK

MCMP06-C Retail . . . .$274.95 BLACK w/CLEAR FACE (SHOWN)

100 RD. MCMP06-T Retail . . . .$274.95 TAN

Polymer 10 round magazine. Constructed from polymer that is strong due to its waffle The MWG 90 Rounder for the A-15/EM-16 The C-MAG is a twin-drum, high capacity ammunition magazine for rifles, light support weapons, firing design. Has see-through construction similar • Magazine: 5.56 mm (.223 Rem) 90 Rds port and other specialized weapons in 5.56mm caliber. Its main components are constructed of high to the Steyr AUG magazine. Does Not Work in • Weight: Empty - 1.25 Lbs., Loaded - 3.60 lbs. impact plastic. Avoiding trouble-prone compression springs, the C-MAG utilizes a unique rotation the LR-204 (RFLR-204)! • Length: 7.75" (Only 3/4" longer that the device and low torsion stress springs which ensure positive control of each round and proper feeding. Note: Some solvents or synthetic oils that standard 30 Rd. Magazine) The design provides for equal distribution of the ammunition in each of the twin drums located on either contain fluorocarbons may cause this For Use In: The EM-16 family of firearms to side of the weapon. This results in a fixed center of gravity during firing, an important attribute during material to crack. include: EM-16, A-15, M-231, Port Firings, etc. full automatic performance. The compact design allows for better ground clearance. .223 MAGAZINE 30 RD. MAGAZINE w/ MAGPUL PMAG, MAGPUL PMAG, 5 ROUND MAG-PUL UPGRADES WINDOWED NON-WINDOWED

MA-5R Retail ...... $24.95 MA-02MP Retail ...... $20.95 MA-MAG210 Retail . . . . .$17.49 MA-MAG211 Retail . . . . .$14.95 30 ROUND 30 ROUND

5 round capacity .223 magazine. Perfect for 30 round, black Teflon™ magazine with Mag-Pul The Magpul Polymer Magazine (PMAG™) is a The Magpul Polymer Magazine (PMAG™) is a areas that have magazine restrictions for self-leveling follower and Mag-Pul Ranger Mag lightweight 5.56 NATO, M-16 compatible lightweight 5.56 NATO, M-16 compatible hunting. floor plate. (MA-02 + MA-SLF + MA-RMP) magazine. This model is windowed for easy magazine. ammo counting. 77 5.56/.223 CAL. MAGAZINE ACCESSORIES SINCLAIR AR GREEN FOLLOWER - MAGPUL FOLLOWER, CAMMENGA FOLLOWER MIL SPEC SELF LEVELING AR15 EASYMAG

FO-01 Retail ...... $14.95 GFM-01 Retail ...... $1.99 MA-SLF Retail ...... $2.20 MA-EASYMAG Retail ...... $33.95 30 ROUND

Magpul Self Leveling Follower, for the 30 rd magazine.

CMMG FOLLOWER, SST Replace the old black follower and solve your feed problems. Currently used on all new US MA-SSAT Retail ...... $2.50 Military contracts. Will not fit the new Allows shooter to single load longer-than- permantently fixed/blocked 5 & 10 rd. or the magazine length rounds with ease. The Thermo-Mold mags. Will fit the new 7, 10, new follower is a long-needed product for slow fire 30 rd. mags and old 30 rd. mags. position shooting in high-power competition - Manufactured by especially at the longer ranges where heavier GFM-10 Retail ...... $16.95 CMMG, Inc. Stainless bullets are popular. The polyethylene follower Steel Anti-Tilt Follower. The innovative design of the EASYMAG allows lifts the round into the chamber as the bolt 10 PACK High Reliability! a shooter to slide back the front section of the comes forward, and locks the bolt open after magazine and simply drop in OR dump out the the round fires. ammunition. Ammo Not Included! WOLFF EXTRA POWER WOLFF EXTRA POWER 20 & 30 RD. MAGAZINE KITS MAG SPRING, 30 RD MAG SPRING, 20 RD • MA-KT Includes floor plate, 30 rd. spring and green follower for MA-KT Retail ...... $5.89 WF-SP-3 Retail ...... $7.99 WF-MSR Retail ...... $7.99 A-15 magazine. 1 Spring 1 Spring

• MA-KT-2 Three-part replacement kit includes a new follower, floor MA-KT-2 Retail ...... $6.00 plate and 20 rd. spring. Simple WF-SP-33 Retail . . . . .$18.95 WF-MS20 Retail . . . . .$18.49 replacement for your existing 3 Pk. 3 Pk. magazine.

30 Round Spring Only MA-30S Retail ...... $2.49

WF-SP-310 Retail . . . . .$49.99 WF-MSE20 Retail . . . . .$49.99 ACCESSORIES-MAGAZINES 10 Pk. 10 Pk. WOLFF EXTRA POWER MAG SPRING, 30 RD

WF-SP-33 Retail . . . . .$18.95 3 Pk.

3 Pk. of SPRINGS • Improves functioning and reliability. • Improves functioning and reliability. • Improves functioning and reliability.

MAG FLOOR PLATES MAGPUL RANGER ARREDONDO AR-15 MAGPUL MAG FLOOR PLATE MAG BASE MFP-01 Retail ...... $1.49 Retail ...... $6.95 Retail ...... $10.00 Retail ...... $3.39 Available in 2 colors: Available in 2 colors: Available in 3 colors: MA-RMP = Black MA-MBB = Black MA-PL = Black MA-PLOD = OD GREEN MA-RMPOD = OD Green MA-MBT = TAN MA-PLT = TAN

Fits metal AR-15 magazines! Use as a base for Provides unsurpassed speed and control Magpul's Ranger floor plate. This new Magpul prone shooting, perfect as a mono-pod. during high stress, tactical magazine changes Replaceable magazine floor plates for most design allows for a quick and easy switch from Features an agressive grip design. Can also be with its loop and recessed rough gripping military magazines including 7 and 10 round, standard floorplates, and allows for fast and used over ammo to eep dirt from entering the surface. Installs over the end of a magazine for 12, 30 and 40 round mags. solid mag acquisition. magazines. Great for Tactical/Limited Class! quick, tactile (touch) changing of a magazine.

78 5.56/.223 CAL. MAGAZINE ACCESSORIES RAIL MAGAZINE 20 & 30 RD SINGLE CINCH DOUBLE CINCH HOLDER MAG CINCH MAGAZINE POUCH MAGAZINE POUCH

MA-101 Retail ...... $39.95 MA-MC20 Retail ...... $19.95 MP-MP1 Retail ...... $29.95 MP-MP3 Retail ...... $29.95 RIGHT-HANDED 20 ROUND ACCESSORIES-MAGAZINES The Rail Mag attaches with a Picatinny rail This non-slip clamp is made of very durable system mount. It is a friction hold system that nylon and polymer and allows you to attach allows for very quick mag changes. Left and right- two magazines together. handed models available. • Magazines not included!

MA-101L Retail ...... $39.95 MA-MC Retail ...... $19.95 Buffer Technologies Mag Pouch designed to Buffer Technologies Mag Pouch designed to hold LEFT-HANDED 30 ROUND hold 2 cinched magazines. Cinch and 2 sets of cinched magazines. Cinches and magazines not included. Includes Alice clips magazines not included. Includes Alice clips and and carry strap. carry strap. UTILITY POUCH AK/AR MAG CAMMENGA MAG CAMMENGA MAG BY SPEC OPS DUST COVER CAPS DUST COVER WELL DUST COVER

MP-UT-B Retail ...... $19.95 MC-01 Retail ...... $7.95 MA-DC556M Retail ...... $2.49 MA-DCM16 Retail ...... $3.99 BLACK AR MAGAZINE

• Protect & cover your AR mag or AK-47 mags • Dust covers keep mags dry & dust free • Slip on easily & seal magazines tightly • Made from molded rubber • Clear only • Standard A.L.I.C.E. Clip for mounting • 100% Lifetime warranty • 4 pack only • Built in Snap Straps, adjustable flap closures. • Double-wall, Cordura® Nylon fabric This Magazine Dust Cover provides protection This Magazine Well Dust Cover provides • Grommet drain holes. MC-02 Retail ...... $7.95 from the elements for M-16/AR-15 style protection from the elements for M-16/AR-15 • Double needle seam-taped perimeters with AK-47 MAGAZINE magazines. Simply slip it over the top opening of style rifles. Simply slip it over the magazine well bar-tack reinforcements at critical stress magazine to preserve optimal feeding to block dust, dirt, and other problem causing points. performance. contaminants. MAG GRIP MAG COUPLER AR MAG COUPLER A-15 MAGAZINE by COMMAND ARMS w/TOP ROUND CAP HOLDER MA-MG Retail ...... $24.95 MA-FM Retail ...... $13.99 MA-70MC00BK Retail . . .$29.95 SM-01 Retail ...... $5.95

Expands ammunition capacity and saves reload time by joining two magazines for the M16/AR15 Provides unsurpassed speed and control or the Ruger Mini 14. Coupler will not scratch of This simply designed side-by-side magazine during high stress, tactical magazine changes deform mags. lightweight and fiberglass, AR Double Mag Coupler with a Top Round Cap. with its loop and recessed rough gripping reinforced with a lifetime warranty. Battle tested holder allows you to securely clamp two surface. Installs over the end of a magazine for and now being used by front line forces in magazines together. The magazines are offset quick, tactile (touch) changing of a magazine. several theatres of operation. and angled by approximately 3/4” to allow for LIFETIME WARRANTY easy magazine transition. • Magazines not included! • Magazines not included! • Magazines not included!

79 MAGAZINE ACCESSORIES & PISTOL GRIPS AR STRIPPER CLIP 10 ROUND LULA MAGAZINE CAMBI MAGAZINE GUIDE HOUSING SPEED LOADER LOADER/UNLOADER LOADER A-15/EM-16

MA-SC Retail ...... $8.95 LCMS10 Retail ...... $18.95 MA-LU Retail ...... $24.95 MA-LO Retail ...... $29.95

Cambi Loader - Strikes Like Lightning, Loads Like Lightning! Personal pocket-sized magazine attached Just slide the loader onto the magazine until it loader/unloader. Fits onto an AR magazine to clicks, close the loading chute firmly. Drop the Stamped steel clip guide housing slips over the assist in loading and unloading loose rounds cartridge into the chamber, primer end first. military style 20 & 30 rd magazines to align and into and out of the magazine. Painless fingers. Squeeze the trigger, repeat until the mag is full. Lift easily load the magazine with standard military For use with a 10 rd. ammunition clip. Will Thumb operation. Prolongs magazine life, the loading chute and remove the mag. It’s that clip guides. Great assist tool. work for all magazines. lightweight 1.3 oz. has only two parts. easy. CAMMENGA .223 CAMMENGA .223 RITE PULL RIGID RITE PULL SURE EASYLOADER EASYLOADER SC GRIP KIT, AMBI GRIP KIT, AMBI MA_EL223 Retail ...... $29.95 MA-EL223SC Retail . . . . .$29.95 Retail ...... $45.00 Retail ...... $48.00

PG-4015RPXBK = Black PG-4005RPXBK = Black PG-4015RPXCB = Coyote Brown PG-4005RPXCB = Coyote Brown PG-4015RPXOD = OD Green PG-4005RPXOD = OD Green

Magazine and Magazine and Ammunition Not Ammunition Not Included! Included! ACCESSORIES-PISTOL GRIPS ACCESSORIES-PISTOL

Each Kit includes one ERGO Rigid Grip with Each Kit includes one ERGO Sure Grip with the Facilitates quick loading of high capacity Made from impact proof nylon fiberglass to Rite Pull Grip Extension and Filler Block. Each new, improved rubber bottom plug with lanyard magazines without the fatigue or frustration resist heat, cold and corrosion. ERGO Grip includes the new, improved rubber and battery storage compartment. Also included from loading rounds one-by-one. Made from bottom plug with lanyard and battery storage is the patented GAPPER with Rite Pull Grip impact proof nylon fiberglass to resist heat, For use with ammunition on a stripper clip. compartment. Also included is the patented Extension and Filler Block. cold and corrosion. GAPPER.

CAA PISTOL GRIP MAGPUL MIAD GRIP STORAGE CORES (INTCHANGABLE GROOVES) 123 LITHIUM BATTERIES AA/AAA BATTERIES BOLT & FIRING PIN PG-UPG16 Retail ...... $36.99 Retail ...... $16.95 Retail ...... $16.95 Retail ...... $16.95

PG-MAG055-B = Black PG-MAG056-B = Black PG-MAG057-B = Black PG-MAG055-DE = Dark Earth PG-MAG056-DE = Dark Earth PG-MAG057-DE = Dark Earth PG-MAG055-OD = OD Green PG-MAG056-OD = OD Green PG-MAG057-OD = OD Green

6 piece interchangeable pistol grip for M16/AR15 and similar type firearms. Grip incorporates multiple finger groove and palm Designed to hold two 123 type batteries in a Designed to hold two AAA or N type batteries Designed to hold one standard AR15/M16 swell inserts allowing the user to customize self contained waterproof unit. Rubber cap is in a self contained waterproof unit. Comes with complete bolt and firing pin. Bolt and Firing their grip to fit all hand sizes for maximum captured to the unit and can be opened with a rubber cap and spacer. Batteries Not Pin Not Included. comfort and control. push of the thumb. Batteries Not Included. Included.

80 PISTOL GRIPS GRIP PLUGS MAGPUL MIAD PANTHER TACTICAL G27 TACTICAL GRIP SPR PISTOL GRIP PISTOL GRIP GRIP by COMMAND ARMS by Sierra Precision Rifles

Retail ...... $35.95 PG-TG Retail ...... $39.95 Retail ...... $24.99 PG-SPR Retail . . . . .$29.95 Two Colors Available: PG-MAG050BK = BLACK PG-MAG050CB = TAN ACCESSORIES-PISTOL GRIPS Increase the performance of your rifle or carbine! Made from reinforced polymer composite, it incorporates finger swelts and a surfaced back strap to enhance your grip and minimize slippage should the grip become wet. Storage The SPR handgrip repositions the shooter’s compartment on bottom. Light-weight. Grip right hand for improved finger positioning on the Length: 4.25 inches/10.5cm. No gunsmithing trigger and a palm swell for comfort and Kit consists of Main Body Unit, 2 Frontstraps, 3 • High-tech polymer injected pistol grip with required. LIFETIME WARRANTY Backstraps and Basic core plug with 3 round adjustable palm grip enhanced gripping endurance. Material and Available in three colors: workmanship is guaranteed for ten years. holder -Mounting Hardware Included. Additional • Left & right side are textured for a firm grip PG-627 = BLACK PG-627TAN = TAN Cores available on previous page. PG-627ODG = OD GREEN For Right-Handed Shooters! A2 STO-GRIP RIGID AMBI GRIP SURE GRIP HOGUE RUBBER GRIP AMBI GRIP w/FINGER GROOVES Retail ...... $12.00 Retail ...... $21.00 PG-AMS Retail . . . .$24.00 Retail ...... $22.95

Rigid Ambi Grip for the AR by ERGO. Sure Grip™ is our rubber overmolded grip. Rear Ergonomically designed grip is comfortable and upper extension supports the web of the hand prevents fatigue. The Rhino Hide™ has a pebble and aids in control of the weapon. Ambi has Standard A2 grip with a hinged trap door. grain texture in a rigid material. Available in no thumb shelf on the left side and allows for a Manufactured by Hogue. AR-15/M-16 Rubber Available in three colors: three colors: comfortable grip right or left-handed. Grip with Finger Grooves fits any firearm with a PG-SG = BLACK PG-AM = BLACK SureGrip™ overmolded rubber versions are standard AR grip. Available in three colors: PG-SGOD = OD GREEN PG-4015XOD = OD GREEN both virtually impervious to oils and solvents PG-15000 = BLACK PG-SGT = TAN PG-4015XCB = TAN used on firearms. PG-15001 = OD GREEN STORAGE COMPARTMENT WALNUT TACTICAL A2 GRIP PLUG MARSH GRIP PLUG PISTOL GRIP GRIP CARTRIDGE HOLDER

PG-BG Retail . . . . .$39.95 PG-WN Retail ...... $69.95 PGP-01 Retail ...... $5.95 PG-CH Retail ...... $7.95

• Converts your A2 grip “Patented” into a stowaway grip • Made from 70 Durometer rubber with large ribs to “Patented” hold tight • Adds the extra benefit of holding three .223 rounds for emergency use “The Panther • Ammunition not Plugster” included!

ERGO GRIP PLUG

PG-4335 Retail ...... $4.00 • Convert your existing A2 pistol grip into a Battlegrip's Storage Compartment Pistol Grip. stowaway grip. Capable of carrying accesories like extra • Walnut tactical/adjustable pistol grip • Fits snug & removes easily batteries or small parts for quick and easy repairs. • Texturized grip for non-slip • Made from 70 Durometer rubber. • Grip not included Manufactured • Also fits the Hogue Grip by ERGO.

81 A2 BUTTSTOCKS STANDARD LENGTH A2 BUTTSTOCK ASSEMBLIES SKELETONIZED BUTTSTOCK A2 BUTTSTOCK ASSEMBLY ASSEMBLY BS-10SK Retail . . . .$109.95 308-BS-10 Retail . . . . .$99.95 BS-10 Retail . . . . .$89.95 Includes Everything Shown Includes Everything Shown • BS-10SK: Complete Skeletonized Buttstock Assembly, includes everything shown. • Includes Everything Shown Plus • BS-13SK: Includes stock buttplate, door Upper & Lower Screws. assembly, rear swivel and lower screw.

BS-13SK Retail . . . . .$73.95

BS-10SK Shown

SKELETONIZED BUTTSTOCK ONLY BS-13 Retail . . . . .$54.95

BS-04SK Retail . . . . .$52.95 • BS-10: Buttstock Assembly, includes everything shown plus upper & lower screws • BS-13: Buttstock w/plate and door assembly. Does not include the tube, spacer, buffer, upper screw and buffer spring. • Stock only • Aluminum Door Assembly, not plastic FULL SIZE SNIPER’S COMMAND ARMS MAGPUL PRS (AR-15) MAGPUL PRS (.308) STOCK (AR15/M16/M4) SRS SNIPER STOCK

BS-SSR25 Retail . . . .$176.30 BS-SRS Retail . . . .$379.99 BS-PRS Retail . . . .$255.00 308-BS-PRS Retail . . . .$255.00 ACCESSORIES-BUTTSTOCKS

TheCAA Sniper Stock is designed to meet the • Mounts on mil-spec AR-15 rifle length receiver • Mounts on .308 rifle length receiver extension demands of the precision marksman community. extension tube tube The Sniper Stock has proven to provide rapid • Machined aluminum adjustment dials with • Machined aluminum adjustment dials with target acquisition, faster and more accurate positive click detents positive click detents follow up shots, and quicker target-to- • Corrosion resistant stainless steel shafts • Corrosion resistant stainless steel shafts Sniper’s stock for SSR-25 & AR15/M16/M4 target attainment. Featuring a rear-folding pod • Integrated bottom Picatinny rail for use with • Integrated bottom Picatinny rail for use with rifles with full size standard buffer tube. that converts an A2 rifle, SR-25 rifle, or M4 monopod monopod Adjustable cheek piece, 7.5” long retractable carbine with a bipod, into a stable shooting • Reversible 1.25” loop front and rear sling • Reversible 1.25” loop front and rear sling monopod. Mil Spec EPDM rubber recoil pad. platform with three-point support. mounts mounts ACE LTD. AR FIXED PMT ADJUSTABLE VLTOR MODSTOCK: VLTOR MODSTOCK: SKELETON BUTTSTOCK STOCK SYSTEM STANDARD RIFLE CLUBFOOT MODEL

BS-ACE Retail . . . .$104.95 BS-PMT Retail . . . .$269.95 A2 MODEL: Retail . . . .$119.95 A2 MODEL: Retail . . . .$119.95 Available in 3 colors: Available in 3 colors: Black (BS-VMS) Green (BS-VMG) Black (BS-VCS) Green (BS-VCG) & & Tan (BS-VMT) Tan (BS-VCT)

Unlike any other stocks available the Rifle Modstock fits both the standard A-15/EM-16A2 rifle receiver extension and the CAR-15/AP4 carbine collapsible-stock receiver extension. So, now you can use that match-grade upper receiver assembly on your collapsible-stock lower, without sacrificing comfort.

• Made of aircraft-grade aluminum • Made of aluminum A1 MODEL: Retail . . . .$119.95 A1 MODEL: Retail . . . .$119.95 • Lifetime warranty • Weighs 1.2 lbs. • Matte finish • 3” of adjustment Available in 3 colors: Available in 3 colors: • Replaces A1 or A2 buttstocks • Uses carbine buffer & spring Black (BS-VA1) Green (BS-VA1G) Black (BS-VCA1) Green (BS-VCA1G) & Tan (BS-VA1T) & Tan (BS-VCA1T) 82 STANDARD LENGTH BUTTSTOCK ACCESSORIES

CHEEK PIECES & CHEEK RESTS A2 BUTTSTOCK ACCESSORIES

WALNUT A2 A2 BUTTSTOCK W/ ADJUSTABLE A2 WOLFF BUFFER BUTTSTOCK ENGRAVED DPMS LOGO BUTTSTOCK SPRINGS

BS-WN Retail . . . .$119.00 BS-04L Retail . . . . .$49.95 BS-27 Retail . . . .$189.95 WF-SP-1 Retail . . . . .$14.99 REDUCED POWER

WF-SP-2 Retail . . . . .$14.99 EXTRA POWER ACCESSORIES-BUTTSTOCKS

WF-SP-6 Retail . . . . .$14.99 STANDARD POWER

• Walnut buttstock in standard A2 length Logo highlighted white for photo only! By Les Branson. Increase your accuracy by • Stock is sold stripped adjusting this new stock assembly to fit your • Uses all standard A2 hardware rifle to your size. Adjustment for length of Standard A2 buttstock with laser etched DPMS pull and vertical adjustment for buttplate. Panther logo. Buttstock only, uses your existing Price includes the buttstock, adjustable WF-BS Retail . . . . .$14.99 buttstock parts. buttplate assembly, rear swivel and lower EXTRA POWER, CARBINE MODELS screw. Does not include the tube and spacer. HAWK DELTA “PRO” SPR ADJUSTABLE A2 STOCK A1 BUTTPLATE CHEEK PIECE BUTTPLATE WEIGHT WEDGE

CP-SP Retail . . . . .$74.95 BS-SPR Retail . . . . .$69.95 MD-01 Retail . . . . .$27.95 BS-02A Retail ...... $3.50

“DCM” • Snaps on/off instantly This die cast frame buttplate easily converts Stock lead weight wedge that fits snugly into the • Smooth face buttplate • Watertight storage chamber your stock into an adjustable stock. Length A2 stock and is retained by the trap door. • No checkering • Lightweight - only 7 oz. of pull is increased by up to 4” and almost 3” Increase your accuracy with weight and • Fits A2 buttstocks • Super tough plastic of vertical cant for proper cheek weld and eye balance. Weighs 3.65 lbs. Cannot be shipped • By Cherokee alignment with your scope. to California! LEATHERMAN A2 SLIP-ON BUTTSTOCK MAGAZINE POUCH A2 CHEEK PIECE RECOIL PADS FROM SPEC OPS

CP-A2HL Retail . . . . .$39.95 CP-05 Retail . . . . .$29.95 Retail ...... $26.95 MP-BS-B BLACK MP-BS-G OD GREEN

A-15/EM-16 MODEL

• The first product to place a sling mount on top of the buttstock (allowing the weapon to be carried in a ready-to-fire position), and allows ammo to be carried where you need it (on the weapon) for New 3-piece design attaches securely to instant, hassle-free access. A2 buttstocks without tools. Two heights of • Holds 20 or 30 rd magazines (30 round in 5.56 only). cheek pads accomodates any optic and mount • Allows for positive and quick opening via pull-tab on cover flap. combination to obtain proper cheek weld. Pads • Adjustable • Mounts securely to most assault style rifles via Mil-Spec webbing, slide onto base rail and locks securely into • Will fit A-15/EM-16 buckle and hook & loop system. position or can be removed with just a push of • Large recoil pads • A-15/EM-16 model fits all A-15/EM-16 variants fixed buttstocks. a button. Base stays attached to stock if iron sights are being utilized. Snag free. See page 86 for carbine model!

83 STANDARD LENGTH ACCESSORIES CARBINE LENGTH BUTTSTOCKS

STANDARD LENGTH ACCESSORIES CARBINE LENGTH BUTTSTOCKS “CVT” ADJUSTABLE BUTTSTOCK MAGPUL CTR CARBINE STOCK CHEEKPIECE FOR AR EXTENDER

CS-MAG311-BLK BLACK CP-CVT Retail . . . .$119.95 BS-20 Retail . . . . .$29.95 CS-MAG311-DKE DARK EARTH Retail ...... $103.95 CS-MAG311-OD OD GREEN Add $1.00 for The CTR is designed to be a drop in replacement blaster pack BP-14 carbine stock body. Adjustable for length of pull. This stock features a unique locking mech that friction locks the stock to the buffer tube for zero movement. Mounts on standard AR15 Commercial carbine tubes. Commercial CTR Stock extension includes spacer butt-pad. slides on here Features: • Friction locking system that eliminates all stock movement • Sloping cheek weld for improved user interface Four pieces, including exposed spacer which This CVT is fully adjustable and will definitely • Ambidextrous sling mounts for QD, 1.25" loops, matches profile of receiver and stock, internal help to improve accuracy by providing a and lanyard hole spacer which lengthens buffer tube, and two platform for correct head position and eye to • Side mounting slots for cheek risers longer stock retaining screws to accomodate scope alignment. • Spacer butt-pad to allow for use with slanted- either the A1 rifle or the slightly longer A2 rifle. • Made from durable Kydex and CNC back commercial buffer tubes Specifications: machined aircraft grade aluminum • Adds 1” to buttstock • Weight: .0785 pounds without rubber butt-pad or spacer butt-pad • Easily adjustable if optic malfunctions and • 6061-T6 aluminum alloy, Black, anodized • Collapsed Length: 7.75" with included spacer butt-pad ironsights are needed. • Made in the USA on computer controlled • Extended Length: 11.05" with spacer included butt-pad • 'Back plate' is pre-drilled to accept a recoil milling machines pad for comfort or to increase length of pull. • Dimensionally accurate to 1/1000”

VLTOR EMOD VLTOR EMOD CAR VLTOR EMOD CAR VLTOR SLIP OVER CARBINE STOCK STOCK KIT FOR A-15 STOCK KIT FOR .308 BUTTPAD

CS-VAEB-M Retail . . . .$125.95 CS-VAEB-KIT Retail . . . . .$196.95 308-CS-VAEB Retail . . . . .$211.95 Retail ...... $19.95 CS-AMB-B BLACK CS-AMB-G OD GREEN CS-AMB-T TAN ACCESSORIES-BUTTSTOCKS

The EMOD is based on the same rugged and The EMOD is based on the same rugged and The EMOD is based on the same rugged and practical design as the original Vltor Modstock – practical design as the original Vltor Modstock – practical design as the original Vltor Modstock – with specific features designed from lessons with specific features designed from lessons with specific features designed from lessons This Rubber Buttpad slips over all (Clubfoot taken from the modern battlefield. taken from the modern battlefield. taken from the modern battlefield. For .308 rifles. and Standard) Vltor Modstock buttplate. Available in three colors Black, Dark OD Also includes receiver extension tube (milspec), Also includes receiver extension tube, buffer, Green and Tan. buffer, buffer spring, lock plate and nut. buffer spring, lock plate and nut for .308.

.308 BUFFERS & BUFFER SPRINGS

.308 STANDARD LENGTH .308 STANDARD LENGTH .308 CARBINE LENGTH .308 CARBINE LENGTH BUFFER SPRING BUFFER BUFFER SPRING BUFFER

308-BS-10B Retail ...... $9.95 308-BS-11 Retail . . . . .$29.95 308-CS-10A Retail ...... $5.39 308-CS-10B Retail . . . . .$24.95

.308 Standard Length Buffer Spring .308 Standard Buffer .308 Carbine Length Buffer Spring .308 Carbine Buffer

84 BUTTSTOCKS CARBINE LENGTH

CARBINE BUTTSTOCK ASSEMBLY PARDUS CARBINE STOCK ASSEMBLY AP4 CARBINE STOCK ASSEMBLY

308-CS-AP4 Retail . . . . .$99.95 CS-AP4 Retail . . . . .$89.95 .308 Buttstock Assemblies AR Buttstock Assemblies

• 308-CS-AP4 = .308 Buttstock Assemblies. • CS-AP4 = A-15 Buttstock Assemblies.

Attention: The pre ban configuration of the carbine stock assembly pictured left, as well as others on this page, may not be legal in ACCESSORIES-BUTTSTOCKS your state. Please check with CS-PS Retail ...... $59.95 Retail ...... $74.95 your local officials. BLACK STOCK GREEN (CS-PS-G) OR TAN (CS-PS-T) Lightweight, fiber reinforced black Zytel, black matte finish. Built-in swivel. Price includes car buffer & spring. DPMS recommends the Car Stock Nut Wrench (TL-CAR) on pg. 93 for easy installation. Make your shooting experience more enjoyable with the addition of an innovative buttstock design from • 6 position locking • Aluminum extension tube • Rear slot for sling DPMS! Made of lightweight, fiber reinforced black Zytel; the buttstock has four integral slots for sling attachment, in addition to the standard sling swivel, making it completely customizable to the needs of CAR STOCK REPLACEMENT PARTS & TOOLS both left-handed and right-handed shooters. Customize your length of pull with the included 6-position buffer tube; both the standard 6-position tube and the Mil-Spec tube fit this design. The new buttstock design also features the following design elements: • Ergonomically shaped latch with fully integrated finger grooves CS-01 Retail ...... $3.00 CS-02 Retail ...... $4.00 • Curved, saw-tooth buttplate provides a tighter cheek weld • Comfortably flared, Monte Carlo-style cheek rest • Reinforced area surrounding the latch pin provides additional strength to the latch pin and helps • CAR Stock Latch Plate • CAR Stock Lock Ring w/o notch it resist breakage should the rifle ever be dropped buttstock down. ACE LTD. AP4 ACE LTD. FIXED COMMAND ARMS AR-15 MAGPUL CTR -MIL SPEC SOCOM STOCK SKELETON STOCK COLLAPSIBLE STOCK CARBINE STOCK

BS-ACEAP4 Retail . . . .$184.95 BS-RFX-E Retail . . . . .$99.95 Retail ...... $54.95 Retail ...... $97.00 Available in 3 colors: STOCK ONLY! Black (CS-CBS), Green (CS-CBSOD), & Tan (CS-CBSTAN)

Black (CS-MAG310-BLK) Dark Earth (CS-MAG310-DKE) Manufactured by Magpul Industries The CTR is designed to be a drop-in replacement carbine stock body. Adjustable for length of pull. This This is the strongest production collapsible stock ARFX Entry stock. This stock is only 7.25" long stock features a unique locking mechanism that friction Six-position collapsible stock with rubber non- locks the stock to the buffer tube for zero movement. Fits available! Approximately 6 times stronger than an without recoil pad; yet is strong enough for its slip recoil pad and skeletonized design features A-15 A2 stock & receiver extension tube. Ideal for intended purpose "Close Quarters Battle.” Uses Mil Spec tube only! Kit includes 5-position Mil Spec a Picatinny rail and storage compartment for buffer tube, buffer, spring, lock plate & AP4 lock nut. CQB or breaching doors, and without the fear of CAR length buffer and spring (not included). batteries or other small items. Ambidextrous bending the receiver extension tube (which Special receiver extension tube, Sling swivel, design. Two ultrasonically welded metal inserts CS-MAG310-KIT Retail .$160.95 disables the rifle). Adjustable length of pull, foam overtube and choice of .5" or 1.0" recoil pad allow for the addition of optional quick release adjusts from 7.5" to 9.5" in five 1/2" increments. are included. sling adaptors (PBSS). COMPLETE ASSEMBLY! VLTOR MODSTOCK KIT: VLTOR MODSTOCK KIT: LMT SOPMOD CLUBFOOT CARBINE STANDARD CARBINE CARBINE STOCK DUOSTOCKS

Retail ...... $179.95 Retail ...... $179.95 CS-LMT Retail . . . .$259.95 CS-TD-U Retail . . . . .$79.99 Available in 3 colors: Available in 3 colors: UNIVERSAL CAR TUBES Black (CS-VCC), Green (CS-VCCG), Black (CS-VCM), Green (CS-VCMG), & Tan (CS-VCCT) & Tan (CS-VCMT)

Manufactured by Duostock Designs Inc. • Ergonomically designed for CQB • Upper surface is the same as any other long gun Carbine Combo Modstock Kit includes: 5-position Carbine Combo Modstock Kit includes: • Lower surface specifically angled to ride on the upper Receiver Extension, Buffer, Spring, Receiver 5-position Receiver Extension, Buffer, Spring, LMT version of the CRANE stock. Offers chest and for use with body armor Lock-Plate and Ap4 Lock Nut. Also includes two Receiver Lock-Plate and AP4 Lock Nut. Also improved cheek weld and two compartments for • Designed to fit on your buttstock extension tube. Long Accessory Compartments, two Cheek Weld includes two Long Accessory Compartments, battery/spare storage. Comes complete with Adapters and a QD Sling Swivel. Clubfoot Model. two Cheek Weld Adapters and a QD Sling spring, buffer, lock ring, latch plate, and tube. CS-TD-C Retail . . . . .$89.99 Swivel. Standard Model. MIL-SPEC TUBE

85 CARBINE LENGTH BUTTSTOCK ACCESSORIES

CHEEK PIECES, RECOIL & BUTT PADS CARBINE BUFFERS

CHEEK PIECE FOR CAR-15 CHEEK PIECE CAA CBS ADJUSTABLE CARBINE BUFFER COLLAPSIBLE STOCKS CHEEK PIECE ASSEMBLIES

CP-AP4 Retail . . . . .$34.95 CP-03 Retail . . . . .$33.95 CS-ACP Retail . . . . .$29.99 BS-CWB Retail . . . . .$59.95 CAR BUFFER COUNTERWEIGHT

CS-T2 Retail . . . . .$39.95 DOUBLE TUNGSTEN H-BUFFER

BS-11T Retail . . . . .$29.95 HEAVY CAR BUFFER ASSEMBLY

• Fits all CAR-15 models • Adjustable Cheek Piece for CBS Picatinny rail • Snaps on/off quickly and locks securely • Increases accuracy on scoped rifles • Height adjustment for eye alignment with optics • Watertight storage chamber • Attaches in seconds • Horizontal adjustment along Picatinny rail • Fits new collapsible style stocks • Lightweight - only 3.5 oz. • Horizontal adjustment along Picatinny rail • By Cherokee • Lifetime guarantee • Made from reinforced polymer • By Cherokee LEATHERMAN SLIP OVER RECOIL BUTTSTOCK AP4 CHEEK PIECE PAD (CARBINE) MAGAZINE POUCH

CAR buffer with tungsten counterweights. Slows down cycle rate on carbine AR rifle. CP-AP4HL Retail . . . . .$34.95 CP-07 Retail . . . . .$14.95 Retail ...... $26.95 Works great on 7" and 11" shorty barrels. MP-AP4-B BLACK MP-AP4-G OD GREEN ATI SHOTFORCE BUTTPAD

ACCESSORIES-BUTTSTOCKS ATI-SBS4700 Retail . . . . .$12.95

New 3-piece design attaches securely to both the original CAR and the newer AP4 tactical collapsible stocks without tools. Two heights of cheek pads accomodates any optic AP4 MODEL and mount combination to obtain proper cheek weld. Pads slide onto base rail and locks securely into position or can be removed with Slip on extended recoil pad for A-15/EM-16 • The first product to place a sling mount on top just a push of a button. Attaches and is removed carbine stocks. Ribbed back for greater of the buttstock, and allows ammo to be in seconds without tools. Snag free. Strongest, comfort while shooting. Will not fit AP4 style carried where you need it most secure cheek pad made for the AP4 stock. carbine stock assembly. • Holds 20 or 30 rd magazines AP4 RUBBER RECOIL CARBINE STOCK AR-15 STOCK Fits both models of the Shotforce Collapsible Buttstock-Pistol Grip Units. Also fits the Pardus PAD (CARBINE) BUTTPAD CHEEK PIECE stock, however it does not fit AP4 stocks. SOG AP4 RUBBER CP-AP4V Retail . . . . .$19.95 CP-10 Retail . . . . .$14.95 CS-SST1 Retail . . . . .$21.99 RECOIL PAD

Retail ...... $19.95 CS-2051B BLACK CS-2051G OD GREEN CS-2051T TAN

• Rubber recoil pad fits collapsible style • Fits on basic variations of the A-15/EM-16 stocks similar to and including the DPMS AP4 telescoping stocks (CAR Stocks) SST1 Saddle Stock is an Ergonomic Cheek Rest telescoping buttstock and the DPMS Pardus • Designed for a secure, smooth fit for M16/AR-15/M4 buttstocks. There are also two Fits the 6-position AP4 Carbine telescoping stock. • Non-textured surface storage compartments, which can be used to stocks designed for a secure, smooth fit. Made hold up to six CR123 3V lithium batteries in the USA. Will not fit "old style" M-4 stocks.

86 SLING ADAPTERS & ACCESSORIES

CAR STOCK SLING CAR STOCK SLING CAR STOCK SLING UNCLE MIKE’S ADAPTER ADAPTER, RIGHT ADAPTER QUAD RAIL SLING SWIVEL

CS-ADP Retail . . . . .$14.95 CS-ADPR Retail . . . . .$14.95 CS-ADP-4 Retail . . . . .$14.95 SL-SW Retail ...... $4.99

• Super Swivel plus special forend adapter that replaces factory Right-hand loops only. • Machine screw base for rear swivel • Jam nut replaces factory rear sling

loop ACCESSORIES-SLING ADAPTERS • Distributed by Bushnell.

Sling adapter for carbine stock assembly Sling adapter for carbine stock assembly Sling adapter for Carbine Stock assembly. UWL SLING ADAPTER allows for attachment between the front of the allows for attachment between the front of the Allows for attachment between the front of the (UNIVERSAL WIRE LOOP) CAR stock & the rear of the lower receiver. CAR stock & the rear of the lower receiver. CAR stock & the rear of the lower receiver. Allows for tangle-free sling operation. Allows for tangle-free sling operation. Allows for tangle-free sling operation. SL-UWL-625 Retail . . . . .$18.95 VLTOR 1-1/4” AMBI VLTOR AMBI LOOP KNS PRECISION SLING ADAPTER SLING ADAPTER REAR SLING MOUNT

CS-SASE-1 Retail . . . . .$19.95 CS-SASE-2 Retail . . . . .$19.95 BS-KNS-1 Retail . . . . .$15.95

The loop is hard-coat anodized before the nylon coated stainless steel aircraft-grade cable is installed with MIL-SPEC ball-shank ends.

CTK AR SLING SWIVEL STUD This model accepts a 1 1/4-inch slings. This model accepts an HK-type hook/carabi- KNS Buttstock Sling Mount provides a standard Choosing the right or left hand placement is neer. Choosing the right or left hand placement sling stud if preferred rather than the military easy. Simply install the indexing washer and is easy. Simply install the indexing washer and style sling "loop." Will NOT fit on the DPMS screw which interfaces with the rear of the screw which interfaces with the rear of the AP4 6-position stock or the Pardus stock. BI-ARSTUD1 Retail . . . . .$12.00 receiver. receiver.

SOG CAR STOCK SLING SOG CAR STOCK SLING SOG CAR STOCK SLING ADAPTER, RIGHT ADAPTER, LEFT ADAPTER, AMBI

Replaces the factory rear sling loop with a quick CS-5090-R Retail . . . . .$15.95 CS-5090-L Retail . . . . .$15.95 CS-5091 Retail . . . . .$23.95 change swivel stud for attaching our P3 Ultimate Monopod. CTK MAGPUL PRS SLING SWIVEL STUD

SL-MPSS Retail . . . . .$12.00

Right-hand Left-hand only. only. Ambidextrous

Sling adapter for Carbine Stock assembly Sling adapter for Carbine Stock assembly Sling adapter for Carbine Stock assembly allows for attachment between the front of the allows for attachment between the front of the allows for attachment between the front of the CAR stock & the rear of the lower receiver. CAR stock & the rear of the lower receiver. CAR stock & the rear of the lower receiver. The MagPul PRS Swivel Stud allows our P3 Allows for tangle-free sling operation. Allows for tangle-free sling operation. Allows for tangle-free sling operation. Ultimate Monopod to easily attach to the MagPul PRS.

87 SLING ADAPTERS

END PLATE END PLATE SLING ADAPTER SLING ADAPTER ADAPTER - LOOP ADAPTER - SLOT W/STUD

SL-MCTAR13 Retail . . .$35.35 SL-MCTAR14 Retail . . .$35.95 SL-MCTAR06 Retail . . .$33.70 SL-MCTAR07 Retail . . .$23.20

Manufactured by Midwest Industries. Manufactured by Midwest Industries. Manufactured by Midwest Industries. Manufactured by Midwest Industries. • For CAR Stocks • For CAR Stocks • Picatinny Rail Mount • Picatinny Rail Mount • To install, simply slide off buffer tube • To install, simply slide off buffer tube • 6061 Aluminum • Fixed Stud • 6061 Aluminum • 6061 Aluminum • 6061 Aluminum 4-POSITION REAR 6-POSITION REAR QUICK DETACH DETACHABLE SLING ADAPTER SLING ADAPTER SLING SWIVEL SLING SWIVEL SL-MCTAR09 Retail . . . .$39.99 SL-MCTAR10 Retail . . . .$39.99 SL-MCTAR08 Retail . . . .$33.72 BL-DTS Retail . . . . .$20.00 ACCESSORIES-SLING ADAPTERS ACCESSORIES-SLING

Manufactured by Midwest Industries. Manufactured by Midwest Industries. Manufactured by Midwest Industries. • Quick Detach • Quick Detach • Quick Detach Detachable Sling Swivel from Falcon Industries. • For CAR Stocks, 4-position • CAR Stock rear sling adapter, 6-position • 6061 Aluminum Fits the Picatinny rail. • 6061 Aluminum • 6061 Aluminum A2 STOCK TOP SLING ADAPTER FRONT SIGHT GRAPHITE SIDE SLING ADAPTER SLING ADAPTER SLING ADAPTER

BS-ADP Retail . . . . .$39.95 SL-TSA Retail ...... $5.95 FS-SM Retail ...... $39.95 FS-SSA Retail ...... $34.95

This sling adapter attaches to the A2 buttstock assembly between the front of the stock & the Allows assault carry of your rifle. Does not Ambidextrous side sling mount for A-15 rifles. Graphite side sling adapter with rail. Front rear of the lower receiver. Allows for tangle- include sling. Military pattern with steel front sight not included free sling operation. Three parts included: loop & rear nylon strap. adapter plate, longer stock screw & spacer. Made of graphite.

88 ACCESSORIES-SLINGS 89 “GILES” SLING CARBINE STOCK Retail . . . . .$39.95 Retail SL-5051-BSL-5051-GSL-5051-T BLACK OD GREEN TAN SL-VCAS-BKSL-VCAS-CBSL-VCAS-FG BLACK SL-VCAS-OD COYOTE BROWN GREEN FOLIAGE OD GREEN SL-GC A section of heavy duty elastic cord is The elastic attached near the mounting clip. allows the weapon to be carried close to the body and still maintain the ability to quickly shoulder the weapon when needed. Retail ...... $59.95 Retail ...... $54.95 ...... Giles Sling for collapsible stock carbines. sling allows shoulder slinging with Tactical quick-handling to the firing position. SOG SINGLE PT SLING W/ADAPTER, RIGHT This sling utilizes Blue Force Gear’s exclusive quick adjust buckle and includes a removable Fastex quick release and connector strap at the fore end which is compatible with all Blue Force Gear modular female adapters. VICKERS COMBAT VICKERS APPLICATIONS SLING ADDITIONAL SLINGS ADDITIONAL Retail . . . . .$34.95 Retail Retail . . . . .$49.95 Retail Retail . . . . .$25.95 Retail A-15A2/EM-16A2* SL-AF1SL-AFODSL-AFT BLACK OD GREEN TAN 1 1/4” wide. Exclusively for the A-15/EM-16. 1 1/4” wide. Exclusively for the Adjustable brass hooks. SL-02 SL-G2 Retail ...... $39.95 SL-GSL A ambidextrous tactical 3 point universal and sling. Nylon, heavy duty slings with an easy to attach flexible swivel for quick weapon acquisition. Fits all long guns. Easy to use, versatile in Black, OD Available and comfortable fit. Tan! Green and * A1 series rear and fore stocks are * and require a sling dimensionally different available on special order. “The original Sling-System!” “GILES” SLING A2 FIXED STOCK A-15 BLACK LEATHER NATIONAL MATCH SLING TRI GLIDE SLIDE SLING SLING 1 TACTICAL SLING SLINGS Retail . . . . .$19.95 Retail Retail . . . . .$32.99 . . . . Retail SL-AWSSL-AWS-ODSL-AWS-T OD GREEN SL-AWS-BR BLACK TAN BROWN SL-05SL-05GSL-05B WHITE OD GREEN BLACK SL-10 Retail ...... $9.95 Retail ...... $54.95 Extra long web sling with two hooks. Designed for use with the M14E2 pistol grip stock. Cloth web with metal buckles. 70GS12BK Made of 1.25” webbing and heavy-duty elliptical bungee for comfort and support encased in compressed tubular nylon sheathing, fixed to limit bounce and enhance retention. Unique single-piece interlocking “MASH Clip” for single- Adjusts from 46” to point weapon attachment. 64” in diameter with heavy-duty tri-glide buckle to allow wear on all body sizes and around bulky tactical vests and gear and a side-release buckle for a quick ditch option. Four inch flex is just the right amount for weapon agility and CQB tactics. Turner Saddlery AWS Rifle Sling. Strap AWS Saddlery Turner Saddlery Turner length is 54”/56”. Made by the Custom Leather Shop. M14E2 WEB SLING M1 GARAND & A-15 SLING BLACKHAWK STORM BLACKHAWK POINT SLING -SINGLE TURNER SADDLERY AWS RIFLE SLING Retail ...... $8.99 . Retail BLACKHAWK SLINGS BLACKHAWK Retail . . . . .$35.95 SL-09SL-09ODSL-09T OD GREEN BLACK TAN Nylon material with two plastic slide buckles. 1 1/4” Wide. This is the "original" EM-16 style 1 1/4" tactical sling. Made of nylon webbing and super heavy duty plastic hardware. One size fits all and is fully adjustable. Retail ...... $4.95 SL-SW 70UT00BK Constructed for extreme use. Billet machined from 6061 aluminum and hard coat anodized for a lifetime of use Featuring a heavy duty QD Swivel. A-15 LIGHTWEIGHT NYLON SLING MI QUICKSLING DETACH SWIVEL HD 1.25” UNIVERSAL TACTICAL SLING SLINGS

SPEC OPS PRODUCTS SLING 101 MAMBA FIGHTING MAMBA FIGHTING WOLF HOOK, SINGLE SLING/FIXED SLING/COLLAPSIBLE POINT SLING

Retail ...... $24.95 Retail ...... $34.95 Retail ...... $34.95 Retail ...... $12.95 SL-SPEC-12 BLACK SL-SPEC-5 BLACK SL-SPEC-4 BLACK SL-SPEC-16 BLACK SL-SPEC-11 TAN SL-SPEC-9 TAN SL-SPEC-18 TAN SL-SPEC-15 TAN SL-SPEC-13 OD GREEN SL-SPEC-7 OD GREEN SL-SPEC-8 OD GREEN SL-SPEC-14 OD GREEN

• Designed specifically for combat deployed • Unique S-T-R-E-T-C-H feature allows wearer • Unique S-T-R-E-T-C-H feature allows wearer • Allows the wearer to keep weapon in a near- troops. to strike an opponent with weapon muzzle to strike an opponent with weapon muzzle ready position while performing two-handed • Unique traverse strap prevents sling from (“barrel thump”) while still having the weapon (“barrel thump”) while still having the weapon tasks. Quick connect/disconnect feature. getting tangled in weapon mounted in a slung and ready position. in a slung and ready position. • Single, rear mounting point; no chance for accessories. • Static-side mounted “Traverse” strap prevents • Static-side mounted “Traverse” strap prevents tangling up in weapons-mounted systems. • “Speed-Lok” feature allows shooter to sling from getting tangled in weapon mounted sling from getting tangled in weapon mounted • Simplifies gear by eliminating additional over - customize the carry and balance of the accessories. accessories. the-shoulder strapping. Mounts to any weapon. • “Speed-Lok” feature allows shooter to • “Speed-Lok” feature allows shooter to weapon with rear sling mounts. • One piece construction lessens chances of customize the carry and balance of the customize the carry and balance of the • Fast, just point and shoot, no sling failure and makes for easy field repairs. weapon. weapon. repositioning necessary. • Fits both Fixed and Collapsible buttstock • Does not use any type of metal snap clips, • Does not use any type of metal snap clips, • New tubular webing design. configurations Velcro or any other noise making hardware. Velcro or any other noise making hardware. • Length: fully extended - 19 inches; retracted - • Emergency quick-release feature. There is no clip and ring to reset each time. There is no clip and ring to reset each time. 9 inches (10 inches of adjustability.) ACCESSORIES-SLINGS MAMBA GERONIMO MAMBA GERONIMO ADDITIONAL SLINGS SLING/FIXED SLING/COLLAPSIBLE VTAC MK1 SLING VTAC MK2 WIDE SLING

Retail ...... $44.95 Retail ...... $44.95 Retail ...... $34.95 Retail ...... $40.95 SL-SPEC-1 BLACK SL-SPEC-3 BLACK SL-MK1-BK BLACK SL-MK2-BK BLACK SL-SPEC-17 TAN SL-SPEC-10 TAN SL-MK1-CT TAN SL-MK2-CT TAN SL-SPEC-2 OD GREEN SL-SPEC-6 OD GREEN

Made for collapsible stock (AR-15 type rifles). The Same great features as original sling, made with Viking Tactics Sling is quick, versatile, dynamic closed cell foam for added comfort for heavier and most importantly simple! firearms. COMMAND ARMS 2PT. COMMAND ARMS TACTICAL SLING ONE POINT SLING

SL-6003 Retail . . . . .$12.99 SL-OPS Retail . . . . .$29.99 • Unique S-T-R-E-T-C-H feature allows wearer • Unique S-T-R-E-T-C-H feature allows wearer to strike an opponent with weapon muzzle to strike an opponent with weapon muzzle (“barrel thump”) while still having the weapon (“barrel thump”) while still having the weapon in a slung and ready position. in a slung and ready position. • Static-side mounted “Traverse” strap prevents • Static-side mounted “Traverse” strap prevents sling from getting tangled in weapon mounted sling from getting tangled in weapon mounted accessories. accessories. • “Speed-Lok” feature allows shooter to • “Speed-Lok” feature allows shooter to • Ideal for tight quarters combat customize the carry and balance of the customize the carry and balance of the • Easy movement in tight spaces weapon. weapon. • Maintains its shape for easy use • Does not use any type of metal snap clips, • Does not use any type of metal snap clips, Special Forces sling, reinforced with polyme • Multiple mounting locations using Velcro or any other noise making hardware. Velcro or any other noise making hardware. hooks & buckles. Has a small pouch to hold a quick detach, yet secure hook There is no clip and ring to reset each time. There is no clip and ring to reset each time. your ear plugs or spare batteries. Paracord on • Constructed of durable 1" nylon web • Geronimo model features a wider tubular web • Geronimo model features a wider tubular web both ends to properly fit any rifle or shotgun. • Fully adjustable sling shoulder strap measuring 1 7/8” wide. shoulder strap measuring 1 7/8” wide. LIFETIME WARRANTY • Quick detach connection points LIFETIME WARRANTY 90 BIPODS & BIPOD ADAPTERS

VERSA-POD BIPOD HARRIS BIPODS VERSA-POD MODULAR BIPOD SYSTEM HARRIS ULTRA LIGHT BIPODS SERIES S, MODEL L BI-MBS Retail . . . . .$89.95 BI-LS Retail . . . . .$99.95 VERSA-POD BIPOD SERIES S, MODEL L ULTRALIGHT Swivel model allows lateral adjustment of rifle to BIPODS allow for uneven terrain. Adjusts from 9 to 13 in. BI-MBS-A15 Retail . . . . .$23.95 • VERSATILE • LIGHT A-15 ADAPTER • STURDY BI-L Retail . . . . .$69.95 • FAST SERIES 1A-2, MODEL L

BI-MBS-14 Retail . . . . .$24.95 Standard L1A2 Model: Adjustable in height from 9 to 13 in. M-14 ADAPTER ACCESSORIES-BIPODS

A unique system of interchangeable shooting rests designed to accommodate virtually any SERIES 1A-2, BI-LMS Retail . . . . .$99.95 shooting application. MODEL L SERIES S, MODEL LM Unique among bipods, Versa-Pod’s innovative mounting system allows a single Versa-Pod to be shared among several rifles. All you need to buy are extra adapters! Swivel model allows lateral adjustment of rifle to allow for uneven terrain. Adjusts from 9 to 13 in. The standard Versa-Pod adapter features a mounting block that screws through the Q.D. sling Features Leg notches in 1” increments. swivel stud found on most rifles, providing a much more secure mounting foundation than other bipods which merely tighten over the sling swivel stud. Special mounting adapters are available for hard to fit models like the Hartford Horsey logo, A-15/CAR-15, M-14/M-1A, Mini-14/30, SKS, T/C Contender, European-type rail, etc., all without #5 ADAPTER any gunsmithing! BI-BR Retail . . . . .$69.95 SERIES 1A2, Benchrest FEATHERWEIGHT CTK P3 MONO GRIP CTK P3 ULTIMATE Lowest of the bipods. Most useful for shooting off the bench. Adjustable height from 6 to 9 in. A-15 SWIVEL BIPOD MONOPOD

BI-ATFWS Retail . . . . .$44.99 BI-MGRIP1 Retail . . . . .$70.00 BI-MPOD1 Retail . . . .$160.00 BI-05 Retail . . . . .$10.95 #5 ADAPTER

BRUCE PIATT’S BI-SLIDE BIPOD FEET

BI-BPF Retail . . . . .$22.95

• Designed to swivel 60 degrees. • Unique “snap-n-lock” button folds legs Two stage telescoping leg provides 360” of forward, down or to the rear in one motion. Converts a vertical foregrip into a shooting rest movement at 100 yds . Cam locking 1st stage • Includes Sling Swivel Stud Adapter. with a simple twist of the wrist. Provides a rock gets you on target in seconds. Fine tune the • Unconditional lifetime warranty. solid support, but still gives you the flexibility and elevation with the threaded 2nd stage. Rotating • Fits round Mil Spec handguards without versatility when you need it the most. delrin foot allows for precise elevation modification. adjustments. • Developed by 5-time World Tactical 3-Gun SOG BIPOD RAIL ARREDONDO BI-POD YHM ALUMINUM Champion Bruce Piatt. QUICK MOUNT BI-POD ADAPTER • Sturdy aluminum feet with a rounded design ADAPTER allows the rifle to be drug in any direction, on just about any surface, with match-winning BI-5006 Retail . . . . .$34.95 BI-QB-BP Retail . . . . .$29.95 BI-YHM-638 Retail . . . . .$29.95 speed. KNS HANDGUARD SLING / BIPOD ADAPTER

BI-KNS-1 Retail . . . . .$13.95

The Quick Release Bi-Pod Adapter lets you put a bipod on or off your weapon in seconds, Harris Bipod Rail Adapter by SOG Armory with just by pressing the button on the side (right or This adapter allows the attachment of a Harris KNS Handguard Sling and Bipod Adapter swiveling stud. 2" Length. left). You can also easily transfer the bipod Bipod to a picatinny rail. Made from aircraft for the standard A-15/EM-16 handguards. between weapons. Mounts on any standard quality aluminum. handguard rail.

91 MOUNTS

SCOPE MOUNTS TRI-MOUNT A-15 TRI-MOUNT THE A-15 RISER YANKEE HILL TRI-MOUNT™ EXCLUSIVELY FOR THE A-15 & EM-16 ORIGINAL! BY B-SQUARE SCOPE RISER

TOP RAIL: Can be used for MT-TRI Retail . . . . .$49.95 MT15-15100 Retail . . . . .$64.95 MT-YHM-227A Retail . .$29.95 mounting laser, flashlight or scope. LEFT RAIL: For scope or laser. SRF-01 Retail . . . . .$24.95 FLASHLIGHT RINGS 1 5/8” Diameter

RIGHT RAIL: For left hand scope or laser. MT-TR2A Retail ...... $0.50 ADDITIONAL SCREWS • Dovetail base riser mount This scope mount is perfect for varmint rifles. • Flattop adapter raises scope over front sight Great for all types of scopes, red dot sights and • Blue finish other optics. Raises the equipment 1/2”. Mounts • A B-Square Mount to any Picatinny rail. Made from aircraft quality MT-TR2 Retail ...... $2.50 aluminum and hardcoated to Mil. Spec. SCREW WASHERS A-15 FLATTOP MOUNT YANKEE HILL Mount your scope, laser & flashlight all at the same time. This new mount lowers the scope height to BY B-SQUARE EOTECH RISER the same level as the iron sights. For additional rigidity this mount not only locates on the sight tunnel of the upper receiver, but also on the upper rails of the upper receiver. Attaches to carry handle! • Made from 6063-T6 Aluminum extrusion for strength, rigidity and accuracy (Anodized black) MT15-15150 Retail . . . . .$74.95 MT-YHM-220 Retail . . . .$39.95 • Tri-Mount™ utilizes standard 1" rings. • Width: 1.25” • Length: 7.5” • Height: 1.25” • Does not fit on flattop upper receiver • Weight without Rings: 7 oz. • One screw and friction washer allows for quick mount or dismount of the Tri-Mount™ A-15/EM-16 NATO ULTRALUX NATO SEE THRU MOUNT STANAG MOUNT

MT15-18526 Retail . . . . .$59.95 MT-UL1 Retail . . . . .$34.95

This mount elevates your EOTech 1/4” to give you a better sight picture. Now the iron sights will no longer obsecure the EOTech reticle. • Base complete with integral rings Made from aircraft quality aluminum and • Attaches to gun's dovetail by large thumb hardcoated to Mil Spec. ACCESSORIES-MOUNTS screw knobs • Base is removed and installed without zero change YANKEE HILL • Blue finish PICATINNY RISER, 3/4” Allows attachment of NATO Scopes or VALDADA IOR Standard Weaver Rings. Rings not included. MT-YHM-9490 Retail . . .$12.75 Mount attaches directly to A-15/EM-16 rifle carry FLATTOP MOUNT handle. Allows attachment of Standard Weaver • Standard dovetail base, Blue finish Rings or Standard NATO scopes (rings not included). This mount is a dual-purpose mount MT-VFT Retail . . . . .$84.95 • Complete with 1" rings • Attaches to the gun's handle by a large thumb that allows shooter to use both the scope and screw knob see through peep for iron sight use. • Base is removed/installed without zero change WIDEVIEW SCOPE MOUNT TRI-RISE SCOPE MOUNT MT-WV Retail . . . . .$19.95

This riser meets Mil Spec 1913 and uses a MT-CFT Retail . .$79.95 Valdada IOR A-15/EM-16 Flattop Mount. larger screw for more clamping power. They fit any Picatinny rail. Great for elevating scopes, VALDADA IOR sights, flashlights, etc. This riser elevates your accessory 1/2”. Made from aircraft quality AR HANDLE MOUNT aluminum and hardcoated to Mil Spec. A scope accessory from Wideview Scope Mounts. GT GRIP ADAPTER MT-VHM Retail . . . . .$55.95 FOR PICATINNY RAIL AIMPOINT FORWARD MOUNT MT-3064 Retail ...... $34.95 AM-10174 Retail . . . . .$57.60

Raises the optical axis .840” to allow use of low Manufactured by rings with low style flattops. This is also a triple SOG Armory. rail mount so you can mount your scope on the Valdada IOR A-15/EM-16 Handle Scope Mount GT Grip Adapter top rail and mount a laser and a flashlight on utilizes a Weaver Rail that attaches to the carry for Picatinny Rails the side rails. handle to mount the scope. Attaches to A2 Upper and mounts scope over the handguard. To be used in conjunction with QRW or QRP ring mount. Spacer also used to put dot above the front sight post.

92 MOUNTS

HANDGUARD MOUNTS TACTICAL LIGHT MOUNTS

UNIVERSAL MOUNTING ALUMINUM UNIVERSAL STRAIGHT BAR MOUNTS PLATFORM, 5.5” MOUNTING PLATFORM MT-01 Retail . . . . .$18.95 MT-MP Retail . . . . .$40.00 MT-4354 Retail . . . . .$25.00 6” STRAIGHT BAR MOUNT

MT-01= 6” MT-02 Retail . . . . .$18.95 4.75” STRAIGHT BAR MOUNT

MT-02= 4.75” MTS-01 Retail ...... $2.00 ADDITIONAL SCREWS ACCESSORIES-MOUNTS

MTS-01

Straight bar mounts that fit into the carry handle of the A1 or A2 upper receiver 5.5” Picatinny Rail with mounting holes and The ERGO Aluminum Universal Mounting Platform for mounting scopes and other optics. They are made from 6061-T6 aluminum slots. Adaptable for most rifles and shotguns. w/Covers from Falcon Industries features hole extrusion, hard coat anodized black, and feature a weaver base. These are Utilizes Xtreme Service Nylon. Handguard not spacing for the AR handguards. Includes covers. see-through mounts that allow usage of the standard ironsights. MT-01 is a 6 included. Made by Falcon Industries. Handguards not included. inch straight bar mount and MT-02 is 4.75 inches. Additional screws (part number MTS-01, pictured right) are also available.

6” RAIL SHORT HANDGUARD A2 ADJUSTABLE FRONT SIGHT RAIL, 1.375” CANTILEVER LIGHT MOUNT

MT-R6 Retail . . . . .$19.95 MT-MCTAR02 Retail . . . .$14.99 MT-MCTAR-A2C Retail . .$116.95 MT-MCTAR01 Retail . . . .$34.99

Manufactured by Midwest Industries. • Will fit any AR series handguards with large or small holes This 6" rail bolts onto your handguards' top, • In most circumstances you will be able to use Manufactured by Midwest Industries. Manufactured by Midwest Industries. bottom or both. It is made of aluminum and is your heat shields after installation Heavy duty, lightweight construction. • Fits standard front sights, Rail is 1.75” long tapered so that your handguard becomes a • Will not work on DPMS GlacierGuards without Allows most optics to co-witness with iron sights. • 6061 Aluminum straight platform to mount lasers, lights, etc. some modification Easy adjusted from the side with optics mounted For CAR and AP4 handguards. • 6061 Aluminum Machined from 6061 and hard coat anodized.

LONG FOREARM MX SERIES CANTILEVER YANKEE HILL MOUNT, 4.125” FOREARM MOUNT AIMPOINT MOUNT TRIPLE MOUNT KIT

MT-MCTAR03 Retail . . . .$19.99 MT-MCTAR05 Retail . . . .$14.99 MT-MCTAR-15 Retail . .$194.95 MT-YHM-639K Retail . . .$85.00

Manufactured by Midwest Industries. Manufactured by Midwest Industries. Manufactured by Midwest Industries. • Will fit any AR series handguards with large or • Height compatible with rear mounted night This mount attaches to the barrel of your AR type • Will fit any AR series handguards with large or small holes vision monocular firearm. It is designed to accept picatinny style small holes • In most circumstances you will be able to use • Large surface area of contact with the rifle’s attachments. Its three mounting surfaces allow you • In most circumstances you will be able to use your heat shields after installation rail for extreme rigidity and strength to attach accessories such as flashlights, laser your heat shields after installation • Will not work on DPMS GlacierGuards without • Cross bolt with built in recoil lug for repeatable sights, grips, etc. Clearance is provided for a • Will not work on DPMS GlacierGuards without some modification zero if the mount is removed bayonet lug. Mounts to barrels with diameters of some modification • Rail is 1.75” long • Military thumbscrew that can be easily .730 and .750 (required bushings included) with • 6061 Aluminum • 6061 Aluminum grasped with your fingers or tightened with a supplied cap screws. Made from aircraft quality coin or screwdriver. aluminum and hardcoated to mil. specs. 93 MOUNTS & SCOPE RINGS RAIL MOUNTS RAILS & RINGS

AR15 TRI-MOUNT JP TACTICAL JP TACTICAL RAIL BADGER MAX50 FLATTOP SCOPE MOUNT RAIL KIT, 4” KIT, RIFLE LENGTH 30MM SCOPE RINGS

MT-1572 Retail . . . . .$19.95 MT-JPTR-L Retail . . . . .$39.95 MT-JPTR-R Retail . . . . .$75.00 SR-306-13 Retail . . . .$175.00

The MAX-50 rings are ONE Inch wide, giving them 60% more holding power than any other AR-15 Tri Mount Flat Top Scope Mount from JP Tactical Rail Kit (4" Section) ring available. Utilizing 6 #8-40 Torx screws to JP Tactical Rail Kit (Rifle Length) the John Masen Company for mounting Works with JP and most other free float tubes. distribute the load providing the Maximum Works with JP and most other free float tubes. scopes and other optics. For mounting in any position other than amount of holding power while minimizing the 12:00. For 12:00 mounting only. chance of damaging the scope.

MASEN MOUNT JP TACTICAL JP TACTICAL RAIL KIT, BADGER SCOPE RINGS RAIL KIT 2” CARBINE LENGTH & MOUNT ( 30MM)

MT-MM Retail . . . . .$24.95 MT-JPTR-S Retail . . . . .$24.95 MT-JPTR-C Retail . . . . .$65.00 SR-306-62 Retail . . . .$175.00 ACCESSORIES-MOUNTS

These alloy rings are made form Aircraft grade JP Tactical Rail Kit (2" section) Aluminum alloy. They are made on the same JP Tactical Rail Kit (Carbine Length) Masen Mount from the John Masen Company. Works with JP and most other free float tubes. pattern as Badger Ordnance's steel rings but Works with JP and most other free float tubes. For mounting in any position other than are almost 50% lighter and strong enough for For 12:00 mounting only. 12:00. almost any job.

CAA DUAL RAIL M14 SCOPE MOUNTS FRONT SIGHT MOUNT DPMS M14 MOUNT M14-M21 KENG SNIPER MOUNTS, STEEL MT-TPR15P Retail . . . . .$27.99 LW-503 Retail . . . . .$89.00 M21-201 Retail . . . .$189.95 M21-201P Retail . . . .$199.95 WEAVER RAIL PICATINNY RAIL

DPMS presents this M1A/M14 Scope Mount. The TPR15P securely mounts to the front sight Featuring a base constructed from solid aulu- providing two rails for laser and light minum as well as quick detach capabilities. equipment to be mounted. Manufactured by DPMS • 2 1/2" 4 position Picatinny rail on each side • High density polymer construction M21-201-SR Retail . . . .$224.95 M21-201P-SR Retail . .$234.95 • Easy to fit/remove and secured by Allen bolts • Accepts Forward Barrel Rail WEAVER RAIL W/RINGS PICATINNY RAIL W/RINGS • An economical alternative to our TPR15X • No gunsmithing required

94 SCOPE RINGS

DPMS SCOPE RINGS WARNE ULTRA HIGH WARNE TACTICAL VALDADA IOR RINGS, BLACK MATTE ULTRA HIGH RINGS MEDIUM QD RINGS

SR-01 Retail . . . . .$14.35 SR-217LM Retail . . .$89.95 SR-617M Retail . . . . .$99.95 SR-VQDM Retail . . . . .$69.00 30MM DIAMETER 30MM DIAMETER

Manufactured by Warne Scope Mounts. ACCESSORIES-SCOPE RINGS

SR-204LM Retail . . . . .$74.95 Aluminum body with steel hardware. 1” Diameter only. 1” DIAMETER Manufactured by Warne Scope Mounts. The tactical, quick detach lever scope rings from Valdada IOR - Medium height. VALDADA IOR VALDADA IOR VALDADA IOR VALDADA IOR HIGH QD RINGS LOW HD RINGS MEDIUM HD RINGS HIGH HD RINGS SR-VQDH Retail . . . . .$92.00 SR-VHDL Retail . . . .$135.00 SR-VHDM Retail . . .$135.95 SR-VHDH Retail . . . .$135.00 30mm Diameter 30mm Diameter 30mm Diameter 30mm Diameter

The tactical, quick detach lever scope rings The standard, tactical scope rings from The standard, tactical scope rings from The standard, tactical scope rings from from Valdada IOR - High height. Valdada IOR - Low height. Valdada IOR - Medium height. Valdada IOR - High height.

LEUPOLD QRW RINGS LEUPOLD QRW RINGS LEUPOLD PRW RINGS LEUPOLD PRW RINGS - MEDIUM HEIGHT - HIGH HEIGHT - MEDIUM HEIGHT - HIGH HEIGHT

LEU-49856 Retail . . . . .$64.95 LEU-49858 Retail . . . . .$64.95 LEU-54149 Retail . . . . .$41.95 LEU-54150 Retail . . . . .$41.95 1” Diameter 1” Diameter 1” Diameter 1” Diameter

Leupold & Stevens Quick Release Weaver Leupold & Stevens Quick Release Weaver Leupold & Stevens Standard Release Weaver Leupold & Stevens Standard Release Weaver Rings. Medium height, matte finish. Rings. High height, matte finish. Rings. Medium height, matte finish. Rings. High height, matte finish.

LEU-49863 Retail . . . . .$77.95 LEU-49865 Retail . . . . .$77.95 LEU-54167 Retail . . . . .$54.95 LEU-54177 Retail . . . . .$54.95 30mm Diameter 30mm Diameter 30mm Diameter 30mm Diameter

95 SCOPES

SIGHTRON SCOPES SIGHTRON TARGET/VARMINT SCOPE SIGHTRON 416 x 42

• 4x16 power • Mil dot reticle This is a one inch Mil-dot scope, 4 power to 16 • 42mm adjustable • Includes sun shade SSC-416 Retail . . . .$419.99 power variable stainless steel beauty. Reflects SSC-SST Retail . . . .$448.95 objective lens • 1” tube diametrer true spacing at the highest power rather than the • Matte black traditional 10 power, with 1/8 minute target turrets, multi-coated lenses, a 720 degree adjustable • Target knobs 1/8” objective, a one-piece body tube and patented clicks ExacTrack Windage and Elevation System. SCOPE LEVELING PANTHER 4x30 PANTHER 4x20 PANTHER 4x30 DEVICE BY MWG RIFLE SCOPE RIFLE SCOPE DELTA SHORTY SCOPE

Retail ...... $34.95 UL-02 Retail . . . . .$49.95 UL-03 Retail . . . .$89.00 SC-4X30 Retail . . . . .$69.95 ACD-01 = 1” Tube ACD-02 = 30mm Tube

• Eliminates 100% of CANT • Weighs less than 1/2 ounce • Attaches in minutes without special tools • Accurate to within 1/8 of a degree • Fits all A1 and A2 Carry Handle Uppers Compact design for those hard to fit • No modification to scope or rifle required • Built in lens covers applications. Imported. 4 power copy of the original A-15 Scope. Has • Works equally well on pistols or rifles • Rubberized Coating • Comes with complete instructions for use • 4 Power 30mm Objective Lens. bullet drop compensator for ranges of 100 to • Quick detachable mount • Ring is made from aluminum & black anodized • 1 inch Dia. Tube 500 yards. Fits A1-A2 Carry Handle Uppers. • Illuminated Reticle

NcSTAR 3x9 DELTA SCOPE XTA TACTICAL J-POINT 8 MOA MICRO SPORTING SCOPE RED/GREEN DOT SIGHT REFLEX SIGHT

SC-3X9C Retail . . . .$129.90 TS-01 Retail . . . . .$79.95 SC-RGD Retail . . . . .$24.95 JP-8 Retail . . . .$264.95 ACCESSORIES-SCOPES

Exceptionally rugged and perfect for all terrains •High quality Red/Green Dot Sight • Sight Window: 21.6mm x 15.4mm • High quality sporting scope. and weather conditions, rubber armored scopes •Sharp, bright field of view • Elevation Adjustment Range: 317cm @ 100m • Sharp, bright field of view. add shock resistance and protect against •Full coated and heavy duty recoil (125in @ 100 yds) • Great power and wide angle. damage to the finish. Custom fitted rings are •Polishing cloth and lithium battery included • Windage Adjustment Rage: 410cm @ 100m • Nitrogen filled and fog-proof. included for use with standard bases. Scopes •Protective shield (162in @ 100 yds) • Fully coated and heavy duty recoil. are waterproof, fogproof and shockproof. •Integrated standard dovetail base • Recoil Resistance: 5,000g

96 AIMPOINT SCOPES & ACCESSORIES AIMPOINT COMP M3/ML3 SCOPES AIMPOINT COMP M2/ML2 SCOPES

AIMPOINT COMPM3 AIMPOINT COMPML3 AIMPOINT COMP M2/ML2 SCOPES

Retail ...... $500.40 Retail ...... $449.10 AM-10338 Retail . .$395.10 AM-10336 Retail . .$441.00 AM-11408 = 2 MOA AM-11416 = 2 MOA COMPML2 - 4 MOA COMPM2 - 4 MOA AM-11403 = 4 MOA AM-11405 = 4 MOA

• Compatible with every generation of NVD. • Compatible with every generation of NVD. Heavy duty scope. This sight is ideal when a short mounting base is required as the total • 50,000 hours of operation on one single • 50,000 hours of operation on one single length of the sight is only 4 3/4”. These sights have a special hard-anodized surface and the battery (on setting 7 out of 10) battery (on setting 7 out of 10) specification for water tightness is equivalent to a depth of 75 feet. The high quality • 500,000 hours of use on NVD setting • 500,000 hours of use on NVD setting requirements are designed to cope with frequent professional use on those types of guns that • Unequalled light transmission • Unequalled light transmission are typically used by the police and the military or for hunting under extreme conditions. The • Available in 2 dot sizes (2 and 4 MOA) CompM2 is compatible with 3rd generation night • Available in 2 dot sizes (2 and 4 MOA) AM-10583 Retail . .$515.70 • Submersible to 45 meters (135 feet) • Submersible to 45 meters (135 feet) vision devices but is otherwise identical to the con- • Comes with replaceable outer black rubber • Comes with replaceable outer black rubber COMPML2-2X - 4 MOA struction of the CompML2. On CompM2’s switch cover cover there is no “off” position necessary as the battery life • Outer rubber cover available in Dark Earth • Outer rubber cover available in Dark Earth at the lowest setting is more than ten years. Brown. Brown. AIMPOINT CompM4 SCOPE AIMPOINT CompC3 SCOPE AIMPOINT 3X MAGNIFIER AM-11972 Retail . . . .$702.00 AM-11421 = 2 MOA AM-11402 = 4 MOA Retail ...... $373.50 AM-11324 Retail . . . .$481.50

Specifically designed to be used whenever you need a compact sight, Aimpoint’s CompC3 is the shortest and lightest sight in Aimpoint’s product range. This sight is AIMPOINT SCOPES The CompM4 is the finest sight that Aimpoint has ever produced. perfect for those who don’t want to carry any extra weight. This sight can be used on 8 years of continuous use from a single AA battery! The CompM4 most types of firearms and like most Aimpoint sights, the CompC3 works under all incorporates an integral mount that eliminates the need for a weather conditions, from the polar ice caps separate ring, and can be customized with vertical and forward to the tropics. Submersible to 15 feet. AM-11422 Retail . .$474.30 spacers to fit a variety of weapon systems. The CompM4 can Available in two dot sizes (2 and 4 MOA). also be used by hunters and sport shooters that need night vision COMPC3-2X - 1 MOA Easy to mount, equipped with a 30mm compatibility. 7 NVD-compatible brightness settings and 9 Aimpoint 3X Scope Attachment Magnifier mounts wide ring that fits all Weaver bases. Daylight settings including one extra-bright setting makes it ready in front of Aimpoint to magnify 3 power. Does not 50,000 hours of operation on one battery. for use around the clock. 2 MOA. include 30mm mount. Black rubber coating. AIMPOINT COMPC AIMPOINT MICRO T-1 AIMPOINT MICRO R-1 AIMPOINT MICRO H-1 SM 7 MOA 4 MOA 4 MOA 4 MOA

AM-10956 Retail . . . .$348.30 AM-11830 Retail . . . .$585.00 AM-11911 Retail . . . .$540.00 AM-11910 Retail . . . .$522.00

The Aimpoint CompC SM is a hybrid sight Weight 3.7 oz. including mount. 1X parallax Its weight – 84 g without mount and 105 g with Micro H-1 - Designed with the hunter in mind, incorporating the new features of the CompC free optic. Compatible will all generations of mount Ideal for rifles. Integral Weaver-style these sights are the lightest red dot sights tough and the extremely fast target acquisition of a Night Vision Devices. 6 night vision compatible base allows easy attachment. ACET enough to bear the Aimpoint name. Small 7MOA dot from the well-known XD technology. settings and 7 daylight settings. Integral technology allows 50,000 hours of operation on enough to be used anywhere that you cold put Picatinny-style base allows easy attachment to one battery. iron sights, these sights can be used on any type any rail. of firearm or archery equipment.

97 AIMPOINT ACCESSORIES AIMPOINT 30MM CAMO RINGS AIMPOINT AIMPOINT AIMPOINT DOUBLE TWISTMOUNT RING TWISTMOUNT BASE BATTERY SLEEVE AM-11429 Retail . . . . .$27.90 AM-11401 Retail . . . . .$86.40 AM-11302 Retail . . . . .$26.10 AM-11400 Retail . . . . .$75.60

Aimpoint Double Battery TwistMount Base Extender Sleeve for for 30mm Aimpoint CompC and TwistMount scope 900 Series. mounting system. AIMPOINT CAP FOR ADJUSTMENT SCREW AIMPOINT LONG AM-10636 Retail ...... $5.40 RUBBER STRAP Aimpoint 30mm Camouflage Scope Rings (1 Pair). AM-11313 Retail ...... $4.50 Adjustment screw cap AIMPOINT 3X MAG. and rubber O-Ring TWISTMOUNT Aimpoint TwistMount Ring for 30mm TwistMount scope mounting system. Strap for Aimpoint Double Battery Cap. AM-11355 Retail . . . .$153.90 AIMPOINT 30MM AIMPOINT COMPM BATTERY CAP LOW RING AM-10634 Retail ...... $7.20 AM-11819 Retail . . . . .$25.20 AIMPOINT BLACK PICATINNY BASE RUBBER OUTER COVER AM-11434 Retail . . . . .$24.30 Battery cap for Aimpoint CompM Series

Black outer rubber cover fits CompC and AIMPOINT BATTERY CAP 9000 series. AM-10631 Retail ...... $4.50

TwistMount Base and Ring for Aimpoint 3X Magnifier. AIMPOINT For use with CompC, TACT MULTI-MOUNT KILLFLASH ARD CompC3, AP 7000 and SYSTEM (30mm) AM-10566 Retail . . . . .$27.00 9000

AC-TMMSS Retail . . . .$139.00 AIMPOINT STRAP FOR ADJUSTMENT CAP Aimpoint wide rings for either Picatinny Killflash ARD to be (AM-10819) or Weaver (AM-10818) Rail AM-10380 Retail ...... $3.60 used with CompC, systems. ML2 or M and filters AM-10818 Retail . . . . .$25.20 the sun. WEAVER BASE To be used with Aimpoint Adjustment Cap. AIMPOINT QUICK AIMPOINT 30MM RELEASE MOUNT AIMPOINT SPACER HIGH RING WITH SCREWS AM-11884 Retail . . . . .$93.60 AM-10830 Retail . . . . .$27.00 AM-10566 Retail ...... $9.90 Tact Multi Mount System / 30MM quick release scope rings For use with Aimpoint PICATINNY BASE PICATINNY BASE

SINGLE MOUNT To be used with either QRW or QRP ring mount to raise the dot MT-AM Retail . . . . .$69.95

ACCESSORIES-SCOPES to co-witness the front sight post on A3 Flattop Uppers. AIMPOINT DOUBLE BATTERY MOUNT AM-11430 Retail . . . . .$31.50

Weaver or Picatinny Mount. 7/16” from the top For Comp sight models. of the base to the bottom of the scope. Double battery module. AM-10203 Retail . . . . .$93.60 AM-10831 Retail . . . . .$27.00 Sleeve, cap & strap for CompM2, XD. SOG Armory Single Mount for Aimpoint. WEAVER BASE WEAVER BASE Made by SOG Armory.

98 DPMS proudly carries all Leupold® scopes, unfortunately we do not have room to list them all. Please visit www.dpmsinc.com or call 320-258-4448 for pricing and availability. FEATURED LEUPOLD SCOPES CQ/T TACTICAL SCOPE MARK 4 LR/T MARK 4 LR/T MARK 4 LR/T 3.5-10x40mm 3.5-10x40mm M3 3.5-10x40mm M1 ILLUMINATED MILDOT M3

LEU-52155 Retail . . . .$709.99 LEU-51182 Retail . . . .$929.99 LEU-52218 Retail . . .$1124.99 LEU-53672 Retail . . .$1179.99

Leupold's new Mark 4 CQ/T 1-3x14mm is a Features turret-mounted side focus dials for Features turret-mounted side focus dials for The Leupold Index Matched Lens System® revolutionary optical sight for tactical firearms parallax and "click" windage and elevation parallax and "click" windage and elevation delivers unsurpassed sharpness across the such as the A-15 and EM-16, combining the adjustments. 30mm maintubes allow for adjustments. 30mm maintubes allow for visual field, brightness, and contrast for strengths of a red dot sight and a increased travel of the windage and elevation increased travel of the windage and elevation excellent target definition, even in low light. variable-power rifle-scope. adjustments adjustments MARK 4 LR/T MARK 4 TMR 8.5-25x50mm MARK 4 3-9x36mm MR/T M1 1x14 TACTICAL 4.5-14x50mm M1 (MATTE) LR/T M1 (MATTE) ILLUMINATED RETICULE PRISMATIC SCOPE

LEU-54660 Retail . . . .$979.99 LEU-60070 Retail . . .$1234.99 LEU-57060 Retail . . . .$934.45 LEU-63300 Retail . . . .$459.99 LEUPOLD SCOPES

The Leupold® Prismatic™ optic gives you the Features turret-mounted side focus dials for fast target acquisition and accuracy of a The Leupold Index Matched Lens System® • Matte Finish parallax and "click" windage and elevation non-magnifying red dot sight. Features a delivers unsurpassed sharpness across the • Once sighted, knobs can be zeroed adjustments. 30mm maintubes allow for glass-etched reticle that’s visible with or without visual field, brightness, and contrast for • Edge-to-edge optical sharpness increased travel of the windage and elevation its removable Illumination Module, or even excellent target definition, even in low light. • Available with the Duplex and Mil. Dot reticles adjustments batteries. VXIII 6.5-20x40 VX-lll 8.5-25X50mm LR RIFLEMAN 3-9x40mm RIFLEMAN 4-12x40mm VARMINT HUNTER VARMINT HUNTER (MATTE) (MATTE) (MATTE)

LEU-57175 Retail . . . .$799.00 LEU-57185 Retail . . .$1099.00 LEU-56160 Retail . . . .$235.52 LEU-56170 Retail . . . .$285.00

Its outstanding low-light performance, accuracy, The 30mm maintube, 50mm objective lens, a The new Leupold® Rifleman™ riflescopes The new Leupold® Rifleman™ riflescopes ruggedness, and absolute waterproof integrity side focus parallax correction dial, and the everything you expect from an American-made everything you expect from an American-made have made the VX®-III a worldwide favorite. highest magnification level of any Leupold Leupold Golden Ring® scope, at a price that's Leupold Golden Ring® scope, at a price that's variable power scope make the VX-III startlingly affordable. startlingly affordable. 8.5-25x50mm Long Range Target model an outstanding choice 99 VALDADA SCOPES & SCOPE COVERS VALDADA IOR SCOPES SCOPE COVERS Features include: • Fogproof • Photo engraved rangefinding reticle • Shockproof FLIP-OPEN SCOPE COVERS BY BUTLER CREEK • Full multicoating and anti-reflection treatment • High resolution optic system • Steel housing, "O" ring sealed and nitrogen • Magnum lock support system on reticle filled • Superior optical glass by Schott Glasswerk, FP-SC Retail ...... $7.99 • Waterproof Germany

M1 4x24 M2 4x24 IR Flip-Open® Scope Covers have an airtight semi-O ring to seal out dust and moisture while protecting expensive optics. A touch of the SC-M1 Retail . . . .$495.00 SC-M2 Retail . . . .$495.00 thumb flips the cover open. Exact sizing for virtually all scopes ensures a true seal when closed. Measure the outside diameter of the eye and objective ends of the scope. EYE PIECE OBJECTIVE OBJECTIVE SZ. ... INCHES...... (mm) SZ. .. INCHES...... (mm) SZ. .... INCHES...... (mm) 01 . . . . .1.341 ...... 34.1 01 . . . .1.000 ...... 25.4 29 . . . . .1.919 ...... 48.7 04 . . . .1.095 ...... 27.8 02 . . . . .1.225 ...... 31.1 30 . . . . .1.960 ...... 49.8 02 . . . .1.221 ...... 31.0 03a . . . .1.300 ...... 33.0 31 . . . . .1.998 ...... 50.7 03a . . .1.300 ...... 33.0 33 . . . . .2.043 ...... 51.9 03 . . . . .1.388 ...... 35.3 03 . . . .1.34 ...... 34.0 34 . . . . .2.100 ...... 53.3 05 . . . . .1.432 ...... 36.4 05 . . . .1.387 ...... 35.2 39 . . . . .2.220 ...... 56.4 07 . . . . .1.457 ...... 37.0 07 . . . .1.429 ...... 36.3 40 . . . . .2.250 ...... 57.2 09 . . . . .1.468 ...... 37.3 09 . . . .1.485 ...... 37.7 43 . . . . .2.310 ...... 58.7 10 . . . .1.500 ...... 38.1 09a . . . .1.485 ...... 37.7 44 . . . . .2.360 ...... 59.9 11 . . . .1.54x1.34 ...... 39.1x34.0 10 . . . . .1.516 ...... 38.5 45 . . . . .2.410 ...... 61.2 12 . . . .1.76x1.53 ...... 44.7x38.9 46 . . . . .2.430 ...... 61.7 11 . . . . .1.550 ...... 39.4 13 . . . .1.530 ...... 38.9 13 . . . . .1.570 ...... 39.9 15 . . . .1.558 ...... 39.6 47 . . . . .2.461 ...... 62.5 14 . . . . .1.605 ...... 40.8 17 . . . .1.612 ...... 40.9 48 . . . . .2.515 ...... 63.9 51 . . . . .2.575 ...... 65.4 15 . . . . .1.66x1.45 . . . .42.2x36.8 19 . . . .1.646 ...... 41.8 53 . . . . .2.600 ...... 66.0 16 . . . . .1.660 ...... 42.2 20 . . . .1.700 ...... 43.2 • Magnification: 4x • Magnification: 4x 53a . . . .2.640 ...... 67.1 17 . . . . .1.675 ...... 42.5 21 . . . .1.735 ...... 44.1 • Objective diameter: 24mm • Objective diameter: 24mm 23 . . . .1.760 ...... 44.7 54 . . . . .2.725 ...... 69.2 18 . . . . .1.700 ...... 43.2 • Tube diameter: 30mm • Tube diameter: 30mm 25 . . . .1.800 ...... 45.7 59 . . . . .2.875 ...... 73.0 19 . . . . .1.730 ...... 43.9 26 . . . .1.820 ...... 46.2 61 . . . . .2.914 ...... 74.0 • Length: 10 inches • Length: 8.75 inches 20 . . . . .1.775 ...... 45.1 27 . . . .1.840 ...... 46.7 62 . . . . .2.930 ...... 74.4 • Weight: 16 oz • Weight: 12 oz 21 . . . . .1.70x1.42 . . . .43.2x36.1 28 . . . .1.890 ...... 48.0 63 . . . . .3.000 ...... 76.2 SUPER M2 2.5 - 10x42 MPS BIKINI SCOPE TINI BIKINI SCOPE COVER COVER

SC-SM2 Retail . . . .$649.00 SC-MP8NATO Retail . . .$850.00 SC-01B Retail ...... $6.95 SC-01T Retail . . . . .$6.95

“One size fits all standard rifle scopes” Millions of shooters appreciate the simplicity, effectiveness and affordable price of this great lens protector. Fits rifle scopes with objective bells up to 62mm outside dia. Designed for the • Magnification: 2.5-10x economy-minded hunter/shooter who prefers a “One size fits all compact pistol/shotgun scopes” • Magnification: 6x • Objective diameter: 42mm one-piece, quick clearing cover. Two pliable Now you can appreciate the excellent performance • Objective diameter: 30mm • Click adjustment: 1/2 MOA rubber-like cups joined by stretch retainers of the BIKINI® for your shorter pistol, shotgun and • Tube diameter: 35mm • Tube diameter: 30mm create a tight moisture and dust-proof seal to red dot scopes. Its shorter to ensure a waterproof fit • Length (with rubber eyepiece): 12.5 inches • Length: 13.75 inches protect your valuable optics while in storage, on these scopes. Here again, it’s a quick clearing, • Weight: 16 oz • Weight: 17 oz transit, or in the field. one-piece cover. SC-MPSIL SCOPECOATS / SCOPECOAT XP6 LEUPOLD SCOPECOAT ARMOR FOR EOTECH CQT FLAKJACKET TRIJICON ACOG TA-01

SC-MP8IL Retail . .$1095.00 Retail ...... $15.99 SC-SCCQT Retail . . . . .$21.95 SC-SCACOG Retail . . . . .$15.99 SC-SC511 = HDS-511/551 SC-SC512 = HDS-512/552 VALDADA SCOPES VALDADA

Model SC-SC511 is shown.

• Magnification: 4-14x • Objective diameter: 50mm • Click adjustment: 1/4 MOA • Tube diameter: 30mm ScopeCoat Neoprene armor for the EoTech 6mm Neoprene ScopeCoat Flakjacket offers ScopeCoat Neoprene armor for the Trijicon • Length: 15 inches 511, 512, 551, 552. Removes quickly for your Leupold CQ/T extreme protection, while ACOG TA-01 offers extreme protection, while • Weight: 25 oz. immediate use. still capable of being quickly removed for use. still capable of being quickly removed for use.

100 ELECTRONIC SIGHTS & LASER SIGHTS EOTECH HOLOGRAPHIC DIFFRACTION SIGHTS Gain The Edge! EOTECH HDS W/NIGHT The HWS has been designed and tested to provide consistent, reliable performance even in the most hostile operating environments. The HWS is VISION & ARMS MOUNT waterproof (submersible), fogproof, shockproof, and withstands extreme temperature variations. Features the A.R.M.S Mounting System The HWS can take the banging, beating and punishing treatment commonly inflicted in battlefield environments and remain fully operational and hold zero. Every HWS is extensively tested in a punishing recoil simulator as well as in various environmental chambers. The Heads Up Display is constructed with a 3 layer, shatterproof laminate glass that is 3/16" thick for added durability. Additional protection for the Heads HDS-553 Retail . . . .$619.00 Up Display is provided with a "roll bar" ruggedized hood.

BLACK CASING, Lithium Battery • Sealed optical cavity ensuring waterproof (submersible) and fogproof operation. • Anti-reflective coatings to eliminate muzzle side reflective glare signature. • Electronics fully encapsulated in shock absorbing resin compound. • State-of-the-art aerospace composite material enclosing the optical cavity. • Hardened and corrosive resistant componentry. • Twenty brightness levels ensure proper brightness control in either low light or very bright sunlight. • Automatic battery check indicator, up/down brightness scrolling and programmable auto shut down features. EOTECH HDS W/O NIGHT VISION EOTECH HDS W/NIGHT VISION

HDS-511 Retail .$356.00 HDS-512 Retail .$377.00 HDS-551 Retail .$399.00 HDS-552 Retail .$459.00

HDS-511 HDS-512 HDS-551 HDS-552

HDS-553-T Retail . . . .$619.00

s ies TAN CASING, Lithium Battery ry rie ry tter atte atte atte ” ba ell b A” b ell b AA c “A c es “ es N ses s N Us Us U Use TRIJICON REFLEX II w/ARMS EOTECH 3X MAGNIFIER W/FLIP TO SIDE MOUNT ACOG SIGHT LEVER MOUNT

HDS-3X-FTS Retail . . . .$499.00 TA-01NSN Retail . . . .$956.25 SC-RX06-23 Retail . . .$442.00

Vastly improved accuracy at distances up to 600m. Rapid transition from Close Quarters. Battle to medium range targeting. Retro-fits to all HWS models. Center dot remains 1 MOA in size, while the angular size of the target is magnified. EOTECH & TRIJICON Trijicon's technologically advanced Reflex sights EOTECH 4x MAGNIFIER offer shooters the perfect combination of speed QUICK DETACH BASE and precision under virtually any lighting conditions. The Trijicon advantage includes: • A bright aiming point in low light, no light or The military version of ACOG. Features 4x bright light. magnification illuminated reticle. Illuminated HDS-4X-FXD Retail . . . .$749.00 • Quick target acquisition and pinpoint accuracy. back up iron sights on top of scope. Iron sights • Big sight picture and realistic color. on top of the front sight post is also tritium • Built to be tough. illuminated. • The both-eyes-open advantage. WITH NON-FLIP BASE ADVANCED COMBAT OPTICAL GUNSIGHTS 4x32 3.5x35 Unleash the full potential of your Holographic Weapon Sight. Due to today's ever changing battlefield, the need to transition quickly between close quarters combat (CQB) and medium range tar- ACOG-01 Retail . . .$1015.75 ACOG-11 Retail . . .$1100.75 get engagement is vital. Maintaining a precise shot at both distances is a must. This ability to transition between two distances almost instantly and still maintain weapon accuracy is achieved with new magnifying optics from L-3 EOTech.

The best sight in the world just became better. The new 4X magnifier mounts behind the HWS and expands its capability by offering target identification and sniper type accuracy out to 600m. This high quality optic offers crystal clear viewing through extremely high light transmission, and maintains an expansive field of view by keeping the rectangular sight picture of the HWS. ACOG BASE, A3 STYLE

MT-TA51 Retail . . . . .$88.00

• Longer eye relief accommodates large caliber ammunition, such as 7.62 NATO. • The standard, fine cross hair reticle is black in the daytime, and is tritium-illuminated red or amber at night. Advantageous in military and police applications for counter-sniper precision aiming. Trijicon ACOG Flattop adapter for Picatinny • Iron sight see through. For AR15 & M16 carry handle models, a hole in the ACOG base allows iron Rails sight use. • Bindon Aiming Concept Models include a dual-illuminated reticle. At night, the reticle is illuminated by tritium, and, in the daytime, by a fiber optic light collector. The system adjusts automatically, for optimal contrast with the target area. 101 FLASHLIGHT MOUNTS, C-MORE RED DOT SIGHTS

TACTICAL LIGHT MOUNTS TACTICAL LIGHT MOUNTS UNDER FOREARM FLASHLIGHT MOUNT FLASHLIGHT MOUNT FOR SUREFIRE® LIGHTS FLASHLIGHT MOUNT FOR SCORPION® LIGHTS MT-FAS2 Retail . . . . .$27.99 MT-FAS2ODG Retail . . .$27.99 MT-OFEK1 Retail . . . . .$39.99 Retail ...... $27.99 BLACK OD GREEN MT-FAS3 = BLACK MT-FAS3ODG = OD GREEN

MT-FAS2TAN Retail . . .$27.99 TAN

Assists the operator to identify threats in Manufactured by Command Arms. low-light conditions or darkness. Hold the weapon • Built to hold 1”-1.08” flashlight, fits all with two hands while still having ready access Picatinny rails to an illumination source! FAS3 Streamlight • Ergonomically integrated forearm grip for (Scorpion) and other 15/16" flashlights, but will FAS2 Assists the operator to identify threats in low-light conditions or darkness. Permits operator to steady, fast shooting accommodate other lights of similar barrel hold the weapon with two hands while still having ready access to an illumination source. FAS2 fits • Smooth, flat bottom for steady shooting from dimensions. Push button mounting and SureFire 6P, 9P and other 1" flashlights, but will accommodate other lights of similar barrel dimensions. supported position adjustment. Manufactured by Command Arms! Push button mounting and adjustment. Manufactured by Command Arms! • Screwdriver required for installation LIFETIME WARRANTY LIFETIME WARRANTY CAA 5 POSITION MX SERIES FRONT CAA FLASHLIGHT VTAC LIGHT MOUNT FLASHLIGHT MOUNT SIGHT LIGHT MOUNT OR LASER MOUNT

MT-UGH3P Retail . . . . .$36.99 MT-MCTAR04 Retail . . .$34.99 MT-BK1 Retail . . . . .$24.99 Retail ...... $19.95 3 Colors Available: • Black (MT-MK4-BK) • Coyote Tan (MT-MK4-CT) • Olive Green (MT-MK4-GO)

Manufactured by Midwest Industries. • Fits standard front sight Flashlight & Laser mount which can be used on any The VTAC Light Mount was designed for any • Rail is 1.75” long Fits 0.96" - 1.06" diameter Flashlight mount locks Picatinny/Weaver rail. Suitable for 3/4" devices. Easy to Picatinny or Weaver rail system. This mount will • Designed for Streamlite M Series or SureFire in any of five positions allowing the flashlight to be fit and dismantle. Light-weight. Molded from reinforced allow you to mount any light with a 1” or slightly X-200 and other brandname lights mounted on either side of the pistol or rifle. polymer composite. larger diameter. 2 allen wrenches included. • 6061 Aluminum

VLTOR SCOUT MOUNTS FOR C-MORE TACTICAL C-MORE RAILWAY SUREFIRE FLASHLIGHTS RAIL RED DOT RED DOT

MT-SM-E Retail . . . .$309.00 SC-CTAC Retail . . . .$309.00 SC-CRW Retail . . .$299.00 The Scout Mount is a Quick Detachable rail mount for certain SureFire flashlights. Installation is simple and the mounting is solid. FLASHLIGHT MOUNTS MT-SM-E • Fits all E-series (Executive) SureFire flashlights. • .810” to .826” Diameter

MT-SM-G • Model for use with G-series (Nitrolon) SureFire flashlights. • 1.025” to 1.040” Diameter

MT-SM-CK • Model for use with CK-series (Classic Knurled) SureFire flashlights. The Tactical Sight mounts to the Picatinny The Railway sight quickly attaches to Weaver • 1.010” to 1.026” Diameter Rail on flattop upper receivers, just like a and Picatinny rail style scope mounts. This removable carry handle and also provides a enables the Railway to be attached to virtually replacement A3 style rear aperture sight. anything! Promotes extremely fast target acquisition.

102 FLASHLIGHTS & ACCESSORIES

PENTAGON LIGHT MD2 PENTAGON LIGHT MS2 PENTAGON LIGHT MS3R PENTAGON LIGHT SA2 XENON LASERLIGHT LED WEAPONMOUNT REAR MOUNT XENON STEALTH LED

FL-MD2-XL-SR Retail . . . .$376.95 FL-MS2-LED-SR Retail . . . .$238.49 FL-MS3R-X-SR Retail . . . .$244.95 FL-SA2-L-LM Retail . . . .$266.49

MD2 LaserLight integrates two essential elements MS2-LED has compact form factor, most suitable MS3R integrated weapon-mount light is a 9-volt SA2 LED AssaultLight eliminates the need of any into one compact system: tactical illumination and for rapid deployment units and SWAT teams during system, capable of achieving greater distance corded remote switches for a direct and positive bystander casualty reduction. When the military force entry where maneuverability and reduced and brightness than the MS2 6-volt system. operation of the light via the tail-cap switch. This is carries out urban warfare or when SWAT team equipment weight are most desirable. Protected by MS3R Xenon Light is a powerful incandescent enabled by its seamless integration with a special conducts tactical operation, this integration of the anti-scratch tempered glass lens, the light source light with 135 lumens of eye-blinding version of LaRue Tactical Mount. light and laser with ARMS #17S compact throw of MS2-LED is a shockproof high power LED. maximal-focused light smoothed by our lever mount reduces overall form factor. proprietary textured reflector. PENTAGON LIGHT PENTAGON LIGHT FRONT TACM III POWER PELICAN 1900 THUMB SCREW MOUNT SIGHT MOUNT 9V XENON LIGHT & MOUNT MITYLITE LED LIGHT SYSTEM LIGHT SYSTEM

FL-UL200-SR Retail . . . .$132.49 FL-UX301-TR Retail . . . .$236.49 TAC-FL Retail . . . .$149.95 FL-1900-BLK Retail . . . . .$14.50

• 7 Lumes • 1.11 Watts • Requires 2 AAA Batteries • 2 Hour Battery Life • Water Resistant up to 500ft • Super Bright Xenon Beam TACM III™ mounts and flashlights are virtually • Lifetime Guarantee indestructible. Lens assemblies have been • Bore Light Adapter Included designed to withstand gun generated G-forces. The lithium batteries provided have a shelf life As a 9-volt xenon tactical light system, UX301 of up to ten years. Mounts are easily installed by SUREFIRE TAILCAP FLASHLIGHTS produces 135 lumens of powerful white light you, using only the supplied Allen wrench or a As a LED-based tactical light with sophisticated SWITCH ASSEMBLY collimated by our proprietary reflector designed for screw driver. on-board electronics to provide constant current focusing the light generated into a smooth • Weighs only 3.9 ounces regulation, UL200 system produces 85 lumens at WITH 8” CABLE intensified light beam. • Only 1 inch in diameter and 4.5 inches long peak brightness for 90 minutes. This duration is • Runs approximately 1 hour 20 minutes on two followed by 3 hours of diminishing brightness at an 3 volt lithium batteries. SF-XM08 Retail . . . .$120.00 usable level. SUREFIRE 7” TAPE SWITCH SUREFIRE TAILCAP SUREFIRE RED SWITCH ASSEMBLY FILTER SF-ST07 Retail . . . . .$65.00 WITH 4” CABLE SF-FM25 Retail . . . . .$58.00 SF-XM04 Retail . . . .$120.00

Waterproof unit includes system disable feature, click on/off pushbutton switch, and plug-in momentary-on remote tape switch. The pushbutton and pressure-activated tape switch operate independently, providing switch redundancy. 8” Cable. SUREFIRE 123A Manufactured by SureFire. Waterproof unit includes system disable LITHIUM BATTERY • Fits 2.5” bezel Surefire Tape Switch ST07 for Millennium feature, click on/off pushbutton switch, and • Provides secondary protection to the lens Universal Weapon Flashlight System plugs plug-in momentary-on remote tape switch. The • Does not impair night vision into XM or UM Tailcap pushbutton and pressure-activated tape switch SF-123A Retail ...... $1.75 operate independently, providing switch redundancy. 4” Cable.

103 G2 NITROLON - HANDHELD LIGHT SUREFIRE 660 SUREFIRE 674 Designed to mount directly to the barrel of AR- Designed to mount directly to the front sight post A small sized, lightweight, hand held flashlight with a high 15/M16 & M4 Carbines with 12-16" barrels. This AR-15/M16 & M4 Carbines with 10.5-16" barrels. output make it a perfect everyday-carry light. Retail system is intended to allow adding the tactical The mount is offset to the right of the weapon. SureFire G2 Nitrolon Black SF-G2-BK advantage of a Surefire light to weapons that have $36.00 not been outfitted with any rail-type systems. Yellow SF-G2-YL $36.00 Tan SF-G2-TN $36.00 OD Green SF-G2-OD $36.00

SF-660 Retail . . . . .$317.00 SF-674 Retail . . . . .$353.00

MILLENNIUM UNIVERSAL TACTICAL LIGHT SYSTEM The Millennium Universal Tactical Light System attaches to Picatinny Rail interface-equipped shoulder-fired weapons via a dual thumbscrew mount. Retail SureFire M951XM 65/120 Lumen SF-M951XM07 $344.00 SureFire M961 125/225 Lumen SF-M961XM07 $350.00 SureFire M971 Turbo/125/225 Lumen SF-M971XM07 $450.00

The Millennium Universal Tactical Light System attaches to Picatinny Rail interface-equipped shoulder-fired weapons via a built-in A.R.M.S. throw-lever mount. Retail SureFire M952XM 65/120 Lumen SF-M952XM07 $417.00 Model: M952XM SureFire M962 125/225 Lumen SF-M962XM07 $456.00 (Shown)

FOREND WEAPONLIGHT SCOUT LIGHT

Recommended for law enforcement applications and An extremely rugged and powerful LED module produces 65 civilian home defense, Millennium Forends replace the Retail lumens of electronically-regulated light with a total runtime Retail weapon's original forend and include a shock-isolated of nearly three hours. tactical light. A 1.625" diameter bezel provides the (Shown Right) SureFire M600 Light SF-M600A $375.00 optimum beam spread for CQB and urban operations. SureFire M600 Kit IR Filter Inc. SF-M600KIT01 $495.00 SureFire M500 White LED SF-M500A-WH $515.00 SureFire M500 Red LED SF-M500A-RD $515.00 Model: M500A SureFire M500 Blue LED SF-M500A-BL $515.00 (Shown) SureFire M511A White LED SF-M511A $515.00 (Standard Length Forend)

A 2.5" beam-focusing TurboHead makes this light ideal for close to medium range applications. Retail SureFire M500AB White LED SF-M500AB-WH $560.00 SureFire M500AB Red LED SF-M500AB-RD $560.00 Model: M600A (Shown) MILLENNIUM M910 SERIES VERTICAL FOREGRIP WEAPONLIGHT

The Millennium M910A Vertical Foregrip WeaponLight The Millennium M910AB Vertical Foregrip WeaponLight attaches to Picatinny rail weapons via a built-in dual Retail attaches to Picatinny rail weapons via a built-in dual Retail thumbscrew mount. A 1.625" diameter bezel provides the thumbscrew mount. A 2.5" beam-focusing TurboHead makes optimum beam spread for CQB and urban operations. (Shown Right) this light ideal for close to medium range applications. (Not Pictured) SureFire M910A Red LED SF-M910A-RD $543.00 SureFire M910AB White LED SF-M910AB-WH $610.00 SureFire M910A Blue LED SF-M910A-BL $543.00 SureFire M910AB Red LED SF-M910AB-RD $610.00 SureFire M910A IR LED SF-M910A-IR $543.00 (Tan Body) SureFire M910A White LED SF-M910A-TN-WH $543.00 SureFire M910A Red LED SF-M910A-TN-RD $543.00 SureFire M910A Blue LED SF-M910A-TN-BL $543.00

Model: M910A Model: M900AB

SUREFIRE FLASHLIGHTS M900A FOREGRIP WEAPONLIGHT (Shown) (Shown)

The Millennium M900A Vertical Foregrip WeaponLight attaches to Picatinny rail weapons via a built-in A.R.M.S. Retail M900AB FOREGRIP WEAPONLIGHT throw-lever mount. A 1.625" diameter bezel provides the optimum beam spread for CQB and urban operations. (Not Pictured) The Millennium M900AB Vertical Foregrip WeaponLight SureFire M900A White LED SF-M900A-WH $616.00 attaches to Picatinny rail weapons via a built-in A.R.M.S. Retail SureFire M900A Red LED SF-M900A-RD $616.00 throw-lever mount. A 2.5" beam-focusing TurboHead makes this light ideal for close to medium range applications. (Shown Above) SureFire M900A Blue LED SF-M900A-BL $616.00 White LED SF-M900AB-WH $683.00 (Tan Body) SureFire M900AB SureFire M900A White LED SF-M900A-TN-WH $616.00 SureFire M900AB Red LED SF-M900AB-RD $683.00 SureFire M900A Red LED SF-M900A-TN-RD $616.00 SureFire M900AB Blue LED SF-M900AB-BL $683.00 SureFire M900A Blue LED SF-M900A-TN-BL $616.00

104 BRASS CATCHERS, DEFLECTORS BRASS CATCHERS PELICAN WEAPONS CASES DPMS SOFT STYLE BRASS CATCHER PELICAN 1510 CARRY-ON CASE

P-1510 Retail . . . .$189.50 BC-02 Retail . . . .$39.95

Manufactured by Pelican Industries Exterior Dimensions: 22.00" x 13.81" x 19.00" Soft bag style brass catcher. Utilizes Interior Dimensions: 19.75" x 11.00" x 7.60" velcro strap for attachment to firearm. Weight: 16.2lbs Available in Black Only. Case is wheeled and has double throw latches. Manufactured by DPMS. PELICAN 1700 WEAPONS CASE

P-1700 Retail . . . .$179.99

TACTICAL SHOOTER GLOVES Manufactured by Pelican Industries WEAPONS CASES Exterior Dimensions: 38.12" x 16.00" x 6.12" Interior Dimensions: 35.75" x 13.50" x 5.25" SHOOTER 2 TACTICAL GLOVES Weight: 19.1lbs Available in Black Only. Case is wheeled and has double throw latches. PELICAN 1720 WEAPONS CASE CL-S2S Retail . . . . .$39.95 SMALL P-1720 Retail . . . .$194.99

Manufactured by Pelican Industries Exterior Dimensions: 44.37" x 16.00" x 6.12" Interior Dimensions: 42.00" x 13.50" x 5.25" Rifle, Pistol CL-S2M Retail . . . . .$39.95 Weight: 21.1lbs Available in Black Only. & Magazine MEDIUM Case is wheeled and has double throw latches. Not Included! PELICAN 1750 WEAPONS CASE

P-1750 Retail . . . .$209.99 CL-S2L Retail . . . . .$39.95 LARGE Manufactured by Pelican Industries Exterior Dimensions: 53.00" x 16.00" x 6.12" Interior Dimensions: 50.50" x 13.50" x 5.25" Rifle, Pistol Weight: 25.65lbs Available in Black Only. & Magazine Case is wheeled and has double throw latches. Not Included!

CL-S2XL Retail . . . . .$39.95 PELICAN 1780 TRANSPORT CASE XLARGE P-1780 Retail . . . .$504.50

Sling System’s Shooter 2 Tactical Gloves. Manufactured by Pelican Industries • Lycra finger gussets Exterior Dimensions: 44.90" x 25.32" x 15.10" DOES NOT • 4-way stretch Spandura, embossed Airprene knuckle padding Interior Dimensions: 42.00" x 22.00" x 5.25" QUALIFY FOR • Terry nose wipe, easy pull tab, Neoprene wrist strap. Weight: 49.0lbs Available in Black Only. FREE SHIPPING! Four (4) heavy duty wheels for one-man mobility. Easy open, double throw latches. CASE DEFLECTORS

These brass deflectors are designed to kick your AR style rifles’ brass out of the way of other shooters. They deflect the brass down and out in front of you at a 2 o’clock position. No tools or modifications needed! According to the DCM, these deflectors are within the rules for DCM. DCM approved and NRA allowed. Rule 3.1.2-3.13-3.3.1. A2 DEFLECTOR FLATTOP HIGH RISE DETACHABLE CARRYING DEFLECTOR DEFLECTOR HANDLE DEFLECTOR

CD-A2 Retail . . . .$21.00 CD-FT Retail . . . .$21.00 CD-HR Retail . . . . .$21.00 CD-DCH Retail . . . . .$21.00

105 WEAPONS CASES

DELUXE WEAPONS CASES

All special weapon cases are made of heavy duty outer shell, brushed nylon lining and 1" "Soft Armor" foam. Each case has individual magazine pouches and 2" wide web handles, 11⁄2" removable and adjustable shoulder straps, and Y.K.K. heavy duty zippers. 36” CARBINE WEAPON CASES 42” STANDARD WEAPON CASES 46” LARGE WEAPON CASES

BWCM-3 Retail . . .$55.00 BWCL-1 Retail . . . . .$59.00 BWCXL-3 Retail . . . . .$59.00

5 pouches hold .223-.308 magazines. Case for: 5 pouches hold .223-.308 magazines. Case for: Five pouches hold .223-.308 magazines. Case for: • A-15 or EM-16 with collapsible stocks • A-15 Sporter • H & K 91A2 to 93A2 • Ruger Mini 14 • FN-FAL • FN-LAR • M-14 • H & K 91A3 & 93A3 with folding stocks • Valmet Model 76, M-60, or M-62 • FN-FAL Paratrooper • M-1A • M-1 Garand • Mitchell Model 76 Sniper • AK-47 with Full Stock • STEYR AUG with full stock • EM-16, EM-16A, & EM-16A2 • Armalite AR-180 & AR-10 • DPMS logo is on side of case. • Galil-308 AR with folding stock • DPMS logo is on the side. • Galil-308 AR with full stock • DPMS logo is on the side. DOSKOCIL SINGLE RIFLE CASE DOSKOCIL DOUBLE RIFLE CASE

RF-CASE Retail . . . . .$16.95 RF-CASE2 Retail . . . . .$34.95 WEAPONS CASES

Value-priced protection for rifles and shotguns. Value-priced protection for rifles and shotguns. This case is oversized to hold 52” Shotguns & Rifles with 50mm Stylish new design adds structural strength and durability. High Mount Scopes, features a ribbed tongue/groove hull design Accommodates two rifles with 50mm high-mount scopes or two to prevent crushing & add protection, four wide rugged & secure shotguns with plenty of extra space for accessories. Padlock snap-over latches with recessed design for protection during lockable. Manufactured by Doskocil Manufacturing. travel, padlock tabs for add security and comfort grip handle. DPMS Sales Guy Jason Notch and the nice doe he shot during the This model comes standard with all DPMS Panther Arms rifles. 2006 Minnesota rifle season. Jason used a custom DPMS 6.8mm Manufactured by Doskocil Manufacturing. SPC rifle and a Leupold scope.

DPMS LOGO RANGE BAG ULTIMATE SHOOTER’S MAT SNIPER DRAG BAG

RB-01 Retail . . . . .$49.95 USM-S Retail . . . .$159.95 SDB-01 Retail . . . .$189.95

71” x 35” - Open 46.5” x 17.5” - Folded

12”H x 49”L

• Combination drag bag and shooters mat. Zips open to lie flat. Two padded side pouches and extra large center pouch. Velcro® • 3/8” closed cell foam padding provides adequate protection for • Constructed of DuPont Cordura™ nylon with a thick 1/2” closed carry handle and shoulder strap. Emblazoned with the DPMS your weapon, ends of case fold in protecting front & rear. cell foam padding. logo. • Constructed of 1000 Denier DuPont Cordura™ nylon. • 3M™ Greptile™ gripping material for a non-slip shooting surface. • Non-slip surface of 3M™ Greptile™ Gripping material. • Has two outside large accessory pockets, one with a double • Case can be rolled for efficient carry with 2” shoulder strap. magazine pouch and scope tiedown. • Rear has two velcro pockets measuring 17.5”x 11.5”. • Padded 2” shoulder straps that tuck away when not in use. • Colors: Black, Olive Drab, Woodland Camo. • Colors: Black, Olive Drab, Woodland Camo.

106 WEAPONS CASES

BLACKHAWK CASES TACTICAL WEAPONS CASES

BLACKHAWK BLACKHAWK BLACKHAWK 35” DISCREET CARRY CASE 29” RIFLE CASE 38” GUN CASE 65DC35BK Retail . . . .$119.95 64RC29BK Retail . . . . .$91.95 61PW00BK Retail . . . .$114.95 WEAPONS CASES

Carry weapons securely and protected with Top quality protection for your valuables! BlackHawk's Padded Weapons Case. Constructed with 1000 denier Nytaneon nylon Constructed with closed cell foam and 1000 The Homeland Security Discreet Case is made to all the same high standards as the original Discreet which is abrasion and mildew resistant. Our denier Nytaneon® nylon. Internal padded Case including the removable .375 inch closed cell foam padding, full 360 degree padding, full wrap padding is 3/8" closed cell foam which takes the divider allows you to carry more than one around carry handles, silent zipper pulls, detachable shoulder strap and HawkTex shoulder pad. The shock and will not absorb moisture or water. weapon side by side. The Padded Weapons middle of the case has two rows of BTS webbing and has fully expandable hook & loop wrap keepers All BlackHawk rifle/shotgun cases unzip totally Case provides 360 degree padded protection for any rifle with accessories such as scopes, lights, lasers, rail mounts, etc. flat to perform as a shooting mat. for your weapons. Dimensions: Dimensions: 35 x 2 x 10 Dimensions: 29 x 2.5 x 11.5 38"L x 3.5"W x 14"H Wt: 3 lbs 12oz. BLACKHAWK BLACKHAWK CORDURA GUNSLINGER PACK 44” GUN CASE 41” TRANSPORT CASE GS-CB = BLACK GS-CG = OG GREEN Retail ...... $189.00 GS-HG = HARDWOODS GRAY 61PW01BK Retail . . .$129.99 66WT00BK Retail . . .$134.95 GS-CK = KHAKI

The new GS05M Gunslinger is a 2900 cubic inch pack, wide enough to hold any type of rifle, including assault rifles and rifles with large scopes. Other features include full side access to the main compartment, hydration bladder housings, multiple pockets with varied sizes and configurations, fully padded harness and back padding, and external triple compression straps. Designed to carry multiple weapons including • Removable waist belt Carry weapons securely and protected with your pistol, rifle, shotgun, and any variation of other weapons. It is made of 1000 denier • Dual hydration compatible (can hold two 3 liter BlackHawk's Padded Weapons Case. hydration systems) Constructed with closed cell foam and 1000 Nytaneon® and 3/8" closed cell foam. The • Scabbard folds into bottom of pack for use denier Nytaneon® nylon. Internal padded inside has a padded removable divider for "side with shorter weapons or when not carrying divider allows you to carry more than one by side" multiple weapon storage. The outside weapons weapon side by side. The Padded Weapons zipper is fully padded with a universal holster • New larger top cover compartment (will hold Case provides 360 degree padded protection for any size pistol and accessories. Includes a several ammo boxes) for your weapons. Dimensions: Hawk Tex shoulder pad and strap. Can also be 44"L x 3.5"W x 14"H laid out flat to serve as a shooting mat. BLACKHAWK BLACKHAWK MAGAZINE POUCHES 24” SHORTY CASE/ LONG GUN PACK MAT LONG GUN DRAG BAG A-15 PISTOL CASE

20PM03BK Retail . . .$234.95 20DB01BK Retail . . .$267.95 Retail ...... $19.99 BWCS-2 Retail . . . . .$49.95 MP-01 = 9mm/.45 ACP MP-02 = .223/.308 Cal.

It is used as a rifle carrying case, a backpack, a Designed and built to meet the needs of the jungle drag bag and as a shooting mat tactical sniper / operator. It is a completely self complete with removable notebook pouch, contained system for carrying your rifle and bullet pouch, weapons cleaning kit pouch and other gear in enemy op areas, and then low bolt pouch. HawkTex® on the mat prevents crawling quietly into position. slipping whether it is hot or cold, wet or dry. This Fully padded. Two interior accessory pouches: 6 pockets hold either .223/.308 magazines For A-15 type pistols with shoulder straps. is an outstanding piece of gear and every 1 pouch holds 2 boxes of .308 ammo and (MP-02) or 9mm/.45 ACP magazines (MP-01). rifleman must have one! another long pouch holds a solid cleaning rod. Please specify which caliber when ordering. Dimensions: 50 x 14 x 4 Overall Length is 51"

107 CLEANING ITEMS

BORE SNAKE RIFLE .223 & .22LR JP A-15 CLEANING PIPE CLEANER FOR CLEANER .22 CAL. CLEANING ROD ROD GUIDE GAS TUBE

Retail ...... $19.95 CR-22CF Retail . . . . .$29.95 CA-03 Retail . . . . .$34.95 PC-GT Retail ...... $4.00 CA-BS = .22 CAL. | CA-BS25 = .25 CAL.

“Dewey Rod” "World's Fastest Gun Bore Cleaner!" Unique cleaning rod guide allows easy Special length coated roads, 8/32 female • Cleans gun bore in 10 seconds cleaning from breach end without damage to threads allow use of other manufacturers • Light and compact the crown, throat or chamber. A must for the accessories. Each rod comes with a hard • Washable and reusable high grade AR. Made from solid anodized plastic ball bearing handle and universal brass • No assembly required aluminum with O-rings to insure precise fit Extra long pipe cleaners for cleaning the entire patch loop. Great for AR match weapons with • Built-in bronze brushes and no metal-to-metal contact. A very high inside diameter of the gas tube. 20 pieces per 20” barrels. • For .22 Cal. & .25 Cal. quality tool for the perfectionist. package. CHAMBER MAID FLEXIBLE CJ BARREL EXTENSION REPLACEMENT SWABS MAG WELL CLEANING ROD & LUG SWAB KIT CLEANING BRUSH Retail ...... $12.95 CA-CJ1 Retail . . . . .$12.50 CA-CJ1-RS Retail ...... $9.95 CA-01 Retail ...... $6.99 CA-CM223 = .223 CAL. .223 CAL. .223 CAL. CA-CM308 = .308 CAL.

CA-CJ1-RS = 20Pc.

CA-CJ308-RS = 12Pc. Barrel extension and Replacement swabs for the barrel extension lug recess swab kit. and lug recess swab kit (CA-CJ1). From CJ Weapons From CJ Weapons Accessories. Accessories.

CA-CJ308-KIT Retail . .$15.00 CA-CJ308-RS Retail . . . .$9.95 .308 CAL. .308 CAL. Quick and easy cleaning of your mags, works Chamber Maid flexible cleaning rod for your rifle. for AK and other mags. Dirt and damage to Available in .223 and .308. magazines are the main reason for weapon From CJ Weapons Accessories failure. Keep them clean for longer life. A-15/EM-16 SEMI-AUTO 308 CAL. SEMI-AUTO A-15 CLEANING LINK BARREL EXTENSION BREECH GUIDE ROD BREECH GUIDE ROD CLEANING TOOL

CA-B223 Retail . . . . .$20.00 CA-B308 Retail . . . . .$23.95 TL-CLT Retail . . . . .$14.95 TL-BE Retail . . . . .$49.95

This tool is used to separate the AR upper and lower while cleaning the barrel and Cleaning the action of any rifle is crucial to long- chamber. This allows you to keep the upper term consistent accuracy. One of the most attached to the lower while cleaning. important steps when cleaning a rifle is cleaning Guides cleaning rod straight into barrel. O- Guides cleaning rod straight into barrel. O- Remove rear pin, install this tool into the rear the lug recess area. It is recommended that the Ring seal prevents oil and debris from coming Ring seal prevents oil and debris from coming pin and install this tool into the rear hole of cleaning of the action be done after regular back into the action. back into the action. For 308 caliber rifles. upper and lower. cleaning of the rifle’s bore. CLEANING ITEMS

108 PRO SHOT CLEANING PRODUCTS

PROSHOT CLEANING SUPPLIES PROSHOT BENCHREST CLEANING KIT STANDARD LENGTH

.30cal. BENCHREST CLEANING KIT CA-30S Retail . .$64.95

6.8mm BENCHREST CLEANING KIT CA-68S Retail . .$64.95

.22cal. BENCHREST CLEANING KIT CA-P22S Retail . .$64.95

CARBINE LENGTH

.30cal. BENCHREST CLEANING KIT CA-30C Retail . .$64.95

6.8mm BENCHREST CLEANING KIT CA-68C Retail . .$64.95

.22cal. BENCHREST CLEANING KIT CA-P22C Retail . .$64.95

The Proshot Benchrest Cleaning Kit contains everything you need to clean your rifle for maximum accuracy! Each kit includes cleaner, lubricant, protectant, copper solvent, a bore brush, jag, patch holder, silicon cloth, patches and a one piece cleaning rod. Available in three calibers: .22LR, 6.8mm, and .30 cal. and two lengths, standard length and carbine length. BORE BRUSH COPPER SOLVENT PROSHOT CLEANING ITEMS Retail ...... $1.60 CA-SVC Retail ...... $7.50 AVAILABLE SEPARATELY! CA-30R = 30cal. Bore Brush CA-270R = 6.8mm Bore Brush CA-22CF = .22cal. Bore Brush PROSHOT CLEANING PATCHES

Proshot Copper Solvent removes the copper fouling regular solvent 2”ROUND CLEANING PATCHES CA-2250 Retail . . .$5.35 can’t. A must have for Proshot premium cleaning patches, 2” round proper barrel break-in patches for 6.8/.270 - .38 cal. rifles. 250 count. and precision rifle cleaning. 6mm-.30 CLEANING PATCHES CA-15300 Retail . .$6.00 Proshot premium cleaning patches, 1.5” round patches for 6mm - .30cal. rifles. 300 count. 1-STEP CLP .22-6.8mm CLEANING PATCHES CA-1300 Retail . . .$5.50 CA-1STEP Retail ...... $7.50 Proshot premium cleaning patches, 1” round patches for .22 -- 6.8/.270 cal. rifles. 300 count. Proshot Benchrest Bore Brush with brass cone and oversized bronze bristles for extended life. Available in three calibers: .22, 6.8, & .30. PROSHOT 1-PIECE CLEANING ROD

CLEANING JAG 1-PIECE STANDARD LENGTH Proshot 1-Step cleans, CA-PS36 Retail . .$22.00 lubricates, and protects Proshot benchrest quality 1-piece stainless steel cleaning rod. 36” length, comes with patch holder. Retail ...... $2.99 actions, bores and the exterior of your CA-J30B = 30cal. Cleaning Jag firearms. 8oz bottle. CA-270B = 6.8mm Cleaning Jag 1-PIECE CARBINE LENGTH CA-PS26 Retail . .$21.00 CA-J22/6B = .22cal. Cleaning Jag Proshot benchrest quality 1-piece stainless steel CLEANING ITEMS cleaning rod. 26” length, comes with patch holder. SILICONE WIPE CLOTH

CA-SILC Retail ...... $3.25 PROSHOT PATCH HOLDER

PROSHOT PATCH HOLDER CA-PHB Retail . . .$1.75 Proshot patch holder. Eyelet holds patches for .22 - .45 caliber firearms.

Proshot Benchrest Spear Tipped Cleaning Jag. Available in three calibers: .30cal., PROSHOT ACTION KIT 6.8/.270cal., & .22-6mm cal. PROSHOT ACTION KIT CA-ACT Retail . .$17.00 Silicone treated cloth removes fingerprints, Proshot Action Kit for cleaning locking lug recesses. polishes and helps preserve your firearms from moisture. 109 CLEANING KITS & CLEANING PRODUCTS BELT POUCH STYLE CLEANING KIT BUTTSTOCK STYLE CLEANING KIT

Retail ...... $20.00 CA-02 = OD GREEN CA-07 Retail . .$13.50 CA-02B = BLACK Complete Assembly Complete Assembly NOTE: Some components may be of NOTE: Some components may be of foreign origin. foreign origin. Kits include one each of the following: Kits include one each of the following: Nylon Belt Pouch Cleaning Brush Buttstock Pouch Cleaning Brush CA-14 = OD GREEN $2.00 CA-14B = BLACK CA-13 CA-16 CA-13 $2.00 $7.50 $1.95

Bore Brush Gov’t Type 5 piece Standard Bore Brush Gov’t Type 5 piece Standard CA-11 $1.50 Rod Assembly CA-11 $1.50 Rod Assembly CA-10 $5.00 CA-10 $5.00

Chamber Brush Chamber Brush CA-12 $3.00 CA-12 $3.00

Oil Bottle Oil Bottle CA-15 CA-15 Kit comes with steel 5 pc. rod assembly Kit comes with steel 5 pc. rod assembly $1.00 $1.00

.308 CHAMBER BRUSH GI 223 STYLE RIFLE AR-15 UPPER AR-15 3 PK. UPPER CLEANING KIT RECEIVER BRUSHES RECEIVER BRUSHES 308-CA-12 Retail ...... $6.99 CA-08 Retail . . . . .$19.99 CA-URB-H Retail ...... $5.95 CA-URB Retail . . . . .$14.95

AR-15 Upper Receiver Brush w/Handle. The .308 Chamber Brush cleans both the barrel chamber and the inside of the barrel extension. 18”x34” GUN IOSSO .223 BORE BRUSH CLEANING MAT

CA-BB Retail ...... $3.75 CA-MAT Retail . . . . .$13.95 For the EM-16/A-15 .223 rifles, just like the GI issue cleaning kits. Contains the following; metal cleaning rod, brushes, patches, chamber Three different upper receiver brushes: the upper brush & oil bottle. Great for the field or to have 18” x 34” Gun receiver brush, the bolt carrier brush and the Replaces the old bronze and brass types. This ready when you need good cleaning Cleaning chamber brush. Will NOT fit Mil-Spec rods. Made brush is wound tighter and has more fiber per equipment. Have the kit that was designed for Mat. Blue Nyflex fiber sized to fit 8/32 cleaning rods. inch than any other brush. Made of Blue Nyflex your rifle. Made by Kleen Bore. Made in the USA. fiber sized to fit 8/32” cleaning rods. Made in the USA . TACTICAL CLEANING A-15/EM-16 SOFTPACK SACS WAD MIXED PACK A-15/EM-16 BUTTSTOCK SYSTEM KIT CLEANING KIT CA-40108 Retail ...... $9.95 CK-750 Retail . . . . .$39.95 CK-223 Retail . . . . .$28.95 CK-224 Retail . . . . .$40.50 SACS wad mixed pack to suit SACS #8 adapter .243/.308, 50 per pack.

The premier weapons cleaning system; cleans all rifles .22 to .50 caliber, shotguns .410 to .10 gauge, and pistols .22 to .45 caliber. The This 5.56 (.223 cal.) cleaning system cleans system includes three memory-flex cleaning This kit cleans and clears .223/5.56 guns and CA-40107 Retail ...... $7.50 all A-15/EM-16 and comes in handy buttstock rods, three forged brass tips, two obstruction comes in the Otis Belt-pack. Includes all you case. This Buttstock Cleaning Kit includes all removers, T-handle, .5oz OTIS Bore cleaner, need to clean your weapon including lens the great features of the Otis cleaning systems cleaning solution and cloths. Also includes

CLEANING ITEMS all caliber patches, shotgun brush adapter, two Small SACS wad mixed pack to suit SACS #7 including instructions. Made by Otis patch savers, 5 bore brushes and a bore cleaning instructions. Made by Otis adapter. (SACS - Small Arms Cleaning System) Technology. reflector. Made by Otis Technology. Technology. 110 ARMORER’S TOOLS

THE FLIPPER PANTHER CLAWS ARMORER’S TOOLS THE FLIPPER PANTHER CLAWS FOR .308 & .223 RIFLES The patented Panther Claw is the perfect armorer’s tool for holding all AR style upper MA-FP Retail . . . . .$34.95 receivers. Made of a solid one piece high 308-TL-PRC Retail . . . . .$59.95 223 CALIBER FLIPPER strength polymer, the Claw is extremely 308 CALIBER PANTHER CLAW durable. Simply clamp the Claw into a bench vise, slide the upper onto the Claw, secure with the two holding pins and begin installing your barrel and components. The 308 Panther™ Claw fits both the LR-308 family of rifles as well as the SR-25 from Knight’s Armament. With some slight TL-PRC Retail . . . . .$49.95 modifications for the mag well, AR-10’s will 223 CALIBER PANTHER CLAW also fit this versatile new gunsmithing tool. Makes installing barrels a breeze!

308-MA-FP Retail . . . . .$44.95 308 CALIBER FLIPPER

"The Flipper”, made of Delrin, is a versatile armorer's tool. Clamp "The Flipper" into your vise and it holds any A-15/EM-16 or .30 caliber lower receiver for assembly purposes. When finished, simply loosen the vise, flip "The Flipper" over and it will hold or retain any A-15/EM-16 upper receiver for U.S. Patent No. 6,761,101 assembly purposes. Will not work with the LR-308 line of upper receivers/ receiver assemblies. ACTION BLOCK DPMS A-15 BARREL FREE FLOAT COMBINATION VISE JAWS INSTALLATION WRENCH WRENCH

PR-02 Retail . . . . .$59.95 TL-05 Retail . . . . .$19.95 FF-W1 Retail . . . . .$24.95 TL-02 Retail . . . . .$15.95

Replaces barrel vise and totally secures and protects receiver during removal and replacement of barrel assembly. Totally eliminates any possibility of damage to barrel detent pin or receiver detent notch. Fits all model Mil. Spec. receivers and is made of Vise Jaw with “V” blocks for other assembly high pressure structural vinyl foam. Torque work. Designed specifically for 1" Bull barrels Used to install most free float tubes to upper. Removes barrel nut, extension tube, and tested to over 200 ft. lbs.! Patent Pending. and 3/4” heavy barrels. Made from steel plate with two wrenching pins. flash suppressor. CAR SPANNER/BUSHING BARREL EXTENSION CAR STOCK DPMS AR MULTI TOOL WRENCH A-15/.45 WRENCH NUT WRENCH

CS-15/45 Retail ...... $4.95 TL-BX Retail . . . . .$58.95 TL-CAR Retail . . . . .$29.95 TL-MW Retail . . . . .$33.95 .223/5.56x45mm

Barrel extension wrench is designed to assist • A-15 carbine stock spanner wrench loosens the removal and installation of the barrel lock ring on telescoping carbine stocks. extension. Also prevents misalignment with • .45 bushing wrench removes barrel bushing outer guide shell. on 1911 style .45 Autos. • Install and disassemble Free Float Tubes • Install and disassemble Barrel Nut For the shooter who has both the TL-BX1 Retail . . . . .$68.95 • Install and disassemble Extension Tube A-15 carbine and .45 auto .308 Caliber Car Stock Nut Wrench. Manufactured by • Install and disassemble Carbine Stock DPMS. This Car Stock Nut Wrench won’t break • Install and disassemble Compensator Fits DPMS, Knight’s Armament SR-25®, and “The American Made Original!” the second time you use it! • Screw driver tip for buttstock screw the Armalite AR-10® barrel extensions. • 4140 Steel, mag phosphated • Hole for hanging on wall & painted finish

111 ARMORER’S TOOLS

TOOLS ARMORER’S KIT

PUNCH KIT Kit includes the following; DPMS ARMORER’S KIT 1 MA-FC Lower vise block W/ 2 HAMMERS 1 PR-02 Action block 1 CA-10D 5pc Cleaning Rod Designed by our armorers, this kit is a complete 1 CA-11 Bore brush (.223 Cal.) tool kit for any one with AR type rifles. All the tools TL-PHK Retail . . . . .$37.95 TL-AKT Retail . . . .$229.00 1 CA-12 Chamber brush (.223 Cal.) you need to handle any task for the serious 1 CA-13 Cleaning brush gunsmith to the average shooter. Includes tool 1 CA-15 Oil bottle box. 1 TL-08 9pc Punch set 1 TL-A1 A1 Sight tool 1 TL-A2 A2 Sight tool 1 TL-MW Multi-Tool wrench 1 CS-15/45 Spanner wrench 1 TL-03 Headspace gauge (Go) 1 TL-03A Headspace gauge (No Go) 1 TL-03B Headspace gauge (Field) 1 BX-7160 Tool box ARMORER’S TOOLS

Nylon Hammer Now Added To Kit! Professional gunsmith punch and hammer set in a hard, plastic case. Includes: Brass hammer COMING SOON! with steel knurled shaft, Nylon hammer, eight each brass punches from 1/16” and 3/32”, two .308 CALIBER each Delrin Punches 15/64” and 3/8”, two each ARMORER’S KIT steel punches 1/16” and 3/32”. A-15/EM-16 HANDGUARD DELRIN PUNCH MILITARY PUNCH SHELL EXTRACTORS REMOVAL TOOL SET

TL-HGR Retail . . . . .$12.95 TL-PU Retail . . . . .$2.95 TL-08 Retail . . . . .$18.95 TL-SE Retail . . . .$13.50 .223/5.56x45mm

.223 broken shell extractor, steel construction

.223 Caliber Shown

This tool simply inserts into the magazine housing on the lower receiver, giving you the leverage needed to compress the delta ring assembly. This compression allows the 308-TL-SE Retail . . . .$13.50 handguards to be easily removed as well as .308 Caliber giving you easy access to the gas tube. Works Great for home repair and sight adjustment. with the A-15/EM-16, AP4 or Car-15 rifle. Rifle Hard plastic tapered punch that can be used Contains 1 each of the following. must have the standard 2-piece to drive out the front and rear pivot pins. Will Steel:1/16”, 3/32” handguard. not scratch or mar your pins or receiver. Brass: 1/8”, 3/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16” .308 broken shell extractor, steel construction LR-308/AR-10 FREE BORE GUIDE W/BARREL FINISH REAMERS DPMS BORE LIGHT FLOAT WRENCH EXTENSION LOCK UP

308-TL-01 Retail . . . .$53.95 BG-BE Retail . . . .$24.95 Retail ...... $276.00 FL-01 Retail ...... $5.95

Uses two (2) “AA” Batteries.

TL-762x51FIN = 7.62 x51 NATO Finish Reamer LR-308/AR-10 Free Float Wrench. Used to Locks into barrel extension to prevent TL-223FIN = .223 Rem Finish Reamer install most free float tubes to upper. Will not movement of bore guide. Won’t damage barrel TL-556FIN = 5.56 NATO Finish Reamer work with standard handguards! or receiver.

112 SAFETY DEVICES BIRCHWOOD CASEY

SAFETY DEVICES FORSTER HEADSPACE GAUGES ARMORER’S TOOLS

.223 REMINGTON GO NO GO FIELD MAX REJECT PACHMAYR DRY FIRE DEVICE 1.464 1.467 1.470 1.474* SNAP CAPS TL-03 TL-03A TL-03B TL-03C Retail ...... $29.95/EA. Retail ...... $10.95 TL-DF Retail . . . . .$19.95 SC-223 = .223 Caliber SC-308 = .308 Caliber The HEADSPACE GAUGE is designed to protect your firearms from unnecessary damage and you, the shooter, from possible injury by showing whether or not the "headspace" of an action is within tolerance. Essentially, headspace is the distance between the face of the breech and the base of the cartridge when the action is closed. Accuracy and safety is threatened when there is excessive headspace. Forster Headspace Gauges are made with painstaking care to insure your accurate testing of the chamber. Each caliber gauge comes in "GO", "NO GO", and "FIELD". If an action will not accept a "GO” gauge, it will not accept cartridge cases of • Provides safe unlimited dry-firing and safe maximum length. If it accepts a "NO GO" gauge the action may have excessive storage of EM-16s, A-15s, and other headspace. If the action accepts a "FIELD" gauge, it should not be fired. Every semiautomatic rifles based on the EM-16 firearms owner should have Forster Headspace gauges for safety and accuracy. • Eliminates the risk of negligent or accidental Specify "GO", "NO GO" or "FIELD" length gauge when ordering. discharges by positively preventing the hammer from impacting the firing pin. 7.62 x39mm 308 WIN. • Improves reliability by eliminating impact Allows safe dry firing while protecting firing damage to the firing pin pin, sear and trigger. Excellent for firearms • Facilitates dry-firing by resetting the trigger Retail ...... $29.95/EA. Retail ...... $29.95/EA. safety and storage. Dry Fire Dummy Rounds mechanism with an approximately 1/4" are made of tough plastic exterior with solid movement brass base. Ideal for training, working firearm • Drop-in, symmetrical, one-piece design makes GO NO GO FIELD GO NO GO action and dry firing. Two per pack. installation and removal quick and easy 1.464 1.467 1.470 1.464 1.467 SC-223 =.223 Caliber; SC-308 =.308 Caliber • Available in black only TL-762A TL-762B TL-762C 308-TL-03 308-TL-03A LOWER RECEIVER DPMS DPMS DPMS NEOPRENE VISE BLOCK SILICONE CLOTH CLEANING MAT CLEANING MAT

MA-FC Retail . . . . .$33.45 OC-01 Retail ...... $2.50 CM-05 Retail ...... $9.95 TL-CM Retail ...... $9.95

Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won’t be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will Pre-coated silicone cloth. Use to clean and not mar or scratch the preserve your firearm from rust and corrosion finish. Comes pre-packaged in a poly bag. DPMS logo 15 1/2” x 20”, green fabric screened w/DPMS Black Neoprene, 16 1/2" x 8 3/4". Prominantly is proudly printed on the cloth logo in lower left corner. features the DPMS logo. ALUMINUM BLACK PERMA BLUE LIQUID PRESTO® GUN SUPER BLACK METAL FINISH GUN BLUE BLUE PEN TOUCH UP PENS

PAB-17 Retail . . . . .$8.50 PAB-13 Retail . . . . .$5.95 BP-BP Retail ...... $6.10 Retail ...... $6.70 BP-FL = Flat Black BP-GL = Gloss Black

Pen contains a fast drying, lead-free paint with Room temperature chemical used by gunsmiths Fast and easy way to touch-up nicks and superior adhesion and durability that helps fill in and industry to blacken aluminum parts. scratches with a simple to use Presto® Gun Blue deep scratches or worn areas. These special Restores scratched and marred areas quickly. A proven way to touch up scratches and worn Pen! Penetrates hard steel instantly and gives formulations are for use on highly polished and Fast acting liquid is easy to apply with no spots or to completely re-blue most guns. It will a durable blue-black finish. One coat coverage matte finished alloy gun receivers, trigger guards, dimensional change. Color will vary from deep give a non-streaky, even blue-black finish to on non-stainless steels. No-spill no-drip, simply scopes, binoculars, etc. gray to black depending on alloy. steel (except stainless). rub on with "bullet point" felt tip! Flat black recommended for A-15!

113 “CLAWSHELLS”

SEALED PACKAGING

FIELD REPAIR KIT BOLT COMPONENT PIN KIT SPRING KIT BP-01 KIT BP-02 BP-03 BP-04 Retail . . .$29.95 Retail . . .$21.95 Retail . . .$19.95 Retail . . .$14.95

Kit Includes: Kit Includes: Rear Takedown Pin, Rear Base Elevation Knob Kit Includes: Front Pivot Pin, Firing Spring, Ejection Port Cover Trigger Spring, Kit Includes: Pin Retaining Pin, Spring, Hammer Spring, Extractor, Extractor Ejector Spring, Extractor, Hammer Pin, Trigger Forward Assist Spring, Spring Assembly, Ejector Roll Pin, (3) Gas Pin, Takedown Detent, Trigger Spring, Magazine Disconnector Spring, Rings, Ejector, Extractor Detent (Selector), Gas Catch Spring, Front Sight Hammer Spring, Pin, Extractor Spring Tube Roll Pin, Trigger Spring, Selector Spring, Extractor Pin, Firing Kit Also Includes: Assembly Guard Pin, Bolt Catch Disconnector Spring, Bolt Pin Retaining Pin, Rear Base Spring Pin Roll Pin, Forward Assist Catch Spring, Extractor Firing Pin, Ejector (UR-22) and Rear Base Pin, Extractor Pin, Spring, Detent Spring, Spring, Ejector. Spring Pin (UR-30) Ejector Roll Pin. Buffer Retainer Spring.

FIRE CONTROL COLT® FIRE CONTROL DELTA PAK BUTTSTOCK EXTENDER GROUP BP-05 GROUP BP-05A BP-06 BP-14 Retail . . .$49.95 Retail . . .$89.95 Retail . . .$12.95 Retail . . .$30.95

Four pieces, including exposed spacer which matches profile of receiver and stock, FIRE CONTROL GROUP internal spacer FOR COLT® SPORTER. Kit Includes: which lengthens buffer Kit Includes: tube, and two longer A-15 Trigger Large Pin Trigger Kit Includes: A-15 Hammer stock retaining screws Large Pin Hammer BL-08 Barrel Spring to accomodate either A-15 Disconnector Large Pin Disconnector BL-07 Barrel Snap Ring A-15 Selector the A1 rifle or the Selector BL-09 Delta Ring slightly longer A2 rifle. “CLAWSHELLS”

A2 SIGHT TOOL ULTIMATE REPAIR Qty. Component Description Qty. Component Description 1 BT-14 Firing Pin, AR 2 LR-15 Takedown Detent BP-25 KIT BP-26 1 BT-07 Extractor, Mil-Spec. 1 LR-27 Detents (Selector) 1 LR-31 Disconnector Spring 1 BL-03 Gas Tube Roll Pin Retail . . . .$8.95 Retail . . .$54.95 3 BT-16 Firing Pin Retaining 1 LR-04 Trigger Guard Pin Pins 1 LR-12 Bolt Catch Roll Pin 1 BT-03 Extractor Pin 1 UR-06 Forward Assist Pin 1 BT-05 Ejector Spring 1 UR-22 Rear Base Spring Pin FR-UK 1 BT-08 Extractor Spring Asy/w 1 UR-30 Rear Base Spring Pin Rub Tip 1 FS-04 Front Sight Spring PARTS IN A POLY BAG 1 BT-06 Ejector 1 UR-07 Forward Assist Spring Retail . . .$49.95 1 LR-32 Hammer Spring 1 LR-16 Magazine Catch Spring 1 BT-04 Ejector Roll Pin 1 LR-02 Buffer Retainer Spring 3 BT-01 Bolt Rings, Gas 2 LR-14 Detent Springs 1 LR-30 Pin, Rear Takedown 1 LR-26 Selector Spring Product will arrive in a sealed clamshell. Parts included in kit are listed to the right. 1 LR-18 Pin, Front Pivot 1 LR-09 Bolt Catch Spring A2 Front Sight Adjusting Tool, 4 prong, Steel. Product arrives in a sealed shell. 2 LR-28 Trigger Pins 1 LR-19 Disconnector, AR-15

WOLFF RIFLE SERVICE PAK A1 SIGHT KIT A2 SIGHT KIT BP-A1 BP-A2

WF-KT-1 Retail . . . . .$34.99 Retail . . . .$8.95 Retail . . .$10.95 STANDARD LENGTH

Service pak includes the following springs: Action, Buffer Retainer, Takedown Pin Detent (2), Forward Assist, Dust Cover, Magazine Catch, WF-KT-2 Retail . . . . .$34.99 Front Sight Detent, Bolt Catch, Extractor Spring, CARBINE LENGTH Disconnector,Charging Handle Latch, Hammer, Kit Includes: Kit Includes: Trigger, Ejector & Safety Detent Springs. FS-03 Detent FS-03 Detent FS-04 Spring FS-04 Spring FS-02 Front Sight FS-01 Front Sight TL-A1 Front Sight Tool TL-A2 Front Sight Tool

114 EM-16 PARTS, M203 GRENADE LAUNCHER EM-16 FULL AUTO PARTS All N.F.A. Rules Apply TRI-BURST KIT SAFE, SEMI, 3 ROUND Mil-Spec New Parts F.F.L. Class II, Class III & Tax Stamp Licensee Only BU-09

BU-01 BU-08 Replacement parts BU-05

not conversion parts. BU-04

BU-06 F.F.L. Class II, Class III & Tax Stamp Licensee Only BU-07 BU-02 EM-16 FULL AUTO (LR-22) Will Not Fit A-15 Retail Retail BU-03 Burst Kit BU-TRI $69.95 Bolt Carrier EM-16 - #844850 BT-12 $60.00 Burst Cam #9349108 BU-01 9.95 Disconnector EM-16

LR-19A 6.00 M203 PARTS EM-16, Burst Disconnect #9349114 BU-02 10.00 Firing Pin EM-16 BT-15 6.00 Burst Disconnect #9349113 BU-03 16.95 Hammer EM-16 W/J-Spring Assembly LR-34 20.00 Burst Hammer #9349110 BU-04 25.00 Selector EM-16 - #8448630 LR-08A 9.00 Burst Ham. Spring #9349107 BU-05 3.50 Trigger EM-16 LR-21 20.00 Burst Trigger #9349117 BU-06 Auto Sear LR-AS1 15.00 25.00 Burst Trig. Spring #9349109 BU-07 Auto Sear Pin LR-AS2 3.00 3.50 Burst Disconn. Spring/2 req. BU-08 2.00 Chrome Parts see page 37 & 40. Burst Cam Spring BU-09 6.00 F.F.L. Class II, Class III & Tax Stamp Licensee Only Will Not Fit A-15

AIRSOFT RIFLES BY SOFTAIR M203 PARTS DPMS EM16 FULL AUTO DPMS A-15 FULL/SEMI AUTO SOFTAIR RIFLE M1 GARAND STOCK SET SOFTAIR MINI MACHINE M1G-01 Retail . . . . .$69.95 • Black • ULTRA GRADE Retail ...... $35.99 SA-17920 Retail . . . .$249.00 SA-17942 = Black SA-17953 = Clear (not shown)

Three piece hi-tech plastic material replaces wooden stock assembly. Sandblast and paint or leave as is. M203 HANDGUARD

HG-C203 Retail . . . . .$49.95 DPMS EM16 Full Auto SoftAir Mini Machine packaged in a clampack. 2 colors available. DPMS A15 FULL AUTO DPMS A-15 SINGLE SHOT SOFTAIR RIFLE SOFTAIR MINI MACHINE SA-17720 = Black (not shown) SA-17732 = Dual-Tone Retail ...... $118.95 SA-17952 Retail . . . . .$35.99 SA-17712 = Clear (not shown) ULTRA GRADE AP4/CAR length M-203 Handguard from Falcon Industries. QUICKLOAD BBs

SA-PELL Retail .$8.99

6mm plastic pellets, 2000 rds., yellow BB’s, .12g

115 MANUALS

Retail ...... $6.00

TM 9-1270 TM 5-725 92F FM 23-5 M16A1 TM-229 TM-238 US Rifle Cal. 30, M1; Springfield Rifle, US Cal. Rigging; Beretta series - Taurus; Hartford Horsey logo Submachine Gun, US Marine Corps 27 pgs. 8 1/2"x11" Maintenance & Repair Cal 45/M3, Technical 30, M1903, M1903A1 & 136 pgs. 8 1/2”x5 1/2” 8 1/2”x5 1/2” This is a manual on the W.E. (1005-672-1767) M1903A4 (Sniper); Manual; 68 pgs. 8 1/2”x5 Manual M16A2; Garand. It's referred to 15 1/2”. The Hartford Horsey Submachine Guns, 192 pgs. 8 1/2”x5 1/2” 116 pgs. 8 1/2”x5 1/2” times on 13 different pages logo A-15 is the same as Cal 45 M3A1, in TM 9-1275. These make the EM-16. W/E (1005-672-1771); good selling partners. 50 pgs. 8 1/2”x5 1/2”

TB-23-7-1 TC 23-44 FM 23-8 TM-ENF TC 90-6-1 TM-208 TM-14 Military Mountaineering; Carbine, Cal. 30, M1; 72 Small Arms Defense 7.62 MM, M14,& M14A2; 62 pgs. 8 1/2”x5 1/2” Rifle, Cal. 30, Commercial Rifle; 192 pgs. 8 1/2”x5 1/2” pgs. 8 1/2”x5 1/2” Against Air Attack; 48 pgs. 8 1/2”x5 1/2” US Rifle Cal 30 Model Automatic Browning, 50 pgs. 8 1/2" x 5 1/2" 128 pgs. 8 1/2”x5 1/2” 1917 Enfield M19181A2 W/E; 53 pgs. 8 1/2”x5 1/2”

TM 9-1215 TM 10-276 FM 23-3 TM-ALICE TC 9-56 SKS MAN-LER TM-1005 Thompson Submachine Hot Weather Clothing & Tactics, Techniques & All Purpose Lightweight SKS Simonov Type 56; 22 Lee-Enfield Rifle Manual Pistol Cal. 45 Automatic Gun, Cal 45, M1928A1; Equipment; 8 1/2”x5 1/2” Concepts of Individual Carrying pgs. 8 1/2”x5 1/2” M1911A1; 32 pgs. 8 1/2”x5 1/2” Anti-Armor Warfare; Equipment; 41 pgs. 84 pgs. 8 1/2”x5 1/2” High quality coated paper 128 pgs. 8 1/2”x5 1/2” 8 1/2”x5 1/2” MANUALS

TM-200 Unconventional Warfare Devices and Techniques - TM-7658 FM 23-35 TM-AK FM 21-15 TM-AK47 TM 9-1275 References; 8 1/2”x5 1/2” Special Forces Combat Pistol & Revolvers; Owners Manual; Care & Use of Clothing & Operator's Manual for the Ordinance Maintenance Recon Manual - Republic 92 pgs. 8 1/2”x5 1/2” 32 pgs. 8 1/2”x5 1/2” Equipment; AK-47 Assault Rifle; 40 pgs. US Cal. 30, M1, M1C & of Vietnam; 8 1/2”x5 1/2” High quality 72 pgs. 8 1/2”x5 1/2” 8 1/2”x5 1/2” MID; coated paper. 104 pgs. 8 1/2” x 5 1/2” TM-CAR 92F-OM TC 21-3 TM-11A Sten, 9MM, MKS, Operators Manual Soldier's Handbook M40A1 US Marine I,II, & III, Illustrated Pistol, for Individual Corps Sniper Rifle; Semiautomatic, Operations & Identification List; Survival in Cold 35 pgs. 9mm, M9 24 pgs. 8 1/2”x5 Weather Areas; 8 1/2”x5 1/2” 1/2” High quality 192 pgs. coated paper 8 1/2”x5 1/2”

116 MANUALS

Retail ...... $6.00

FM 31-21 FM21-11 FM 21-76 MAN-USMG TM-248 TM-222 FM 21-26 Guerrilla Warfare & Special Forces Operations; First Aid for Soldiers Survival; U.S. Marine Guidebook of 8 1/2”x5 1/2” M1 Garand; Map Reading and Land 287 pgs. 8 1/2”x5 1/2” 256 pgs. 8 1/2”x5 1/2” Essential Subjects 64 pgs. 8 1/2”x5 1/2” Navigation; 256 pgs. 8 1/2”x5 1/2”

Ranger TM-226 $6.00 Handbook Cal. 22 High Standard $8.95 Automatic Pistol (Supermatic) Cal: Ruger Mark 2 Automatic Pistol (Target Model 6 7/8” Barrel). Cal. 38

Special Smith and Wesson Revolver (Masterpiece). Cal. TM 9-1276 AF64-5 30-06 Winchester Rifle Carbine, Cal. 30, M1, Air Crew Survival Model 70. Cal. 22 M1A1, M2 & M3; 121 pgs. 8 1/2”x5 1/2” Remington Rifle Model 40X- SH21-76 TM-226 S1 (National Match) front TM-223 192 pgs. 8 1/2”x5 1/2” TM-M160M Ranger Handbook; 8 1/2”x5 1/2” and rear sights; Rifle, 7.62-MM, M14(A) $6.00 M-16 Maintenance 388 pgs. 8 1/2”x5 1/2” 99 pgs. 8 1/2”x5 1/2” Manual (It's bound on the top). 30 pgs. 5”x7”

BK-SD TM-16HB TM-AK-47 TM-BYO TM-FAL TM-M2 TM-SKS MANUALS Handbook on the AR The AR-15, M-16 Assault The AK-47 Assault Rifle Build Your Own AR-15 The FN-FAL Rifle et al. Technical manual on The SKS Type 45 the M2 .50 caliber Rifle. Rifle Handbook 152 pgs. 8 1/2”x5 1/2” 98 pgs. 8 1/2”x5 1/2” 133 pgs. 8 1/2”x5 1/2” Carbines machine gun. AR OWNER’S GUIDE! 126 pgs. 8 1/2”x11” 118 pgs. 8 1/2”x5 1/2”

$22.95 $13.95 $20.95 $19.95 $21.95 $19.95 $17.95

TM-AF Current U.S. Army and Air Force manual. Similar to U.S.M.C. tech manual, but also covers the AP4 carbine. Covers detailed disassembly and diagnosis. 8 1/2”x5 1/2”, 3/4” thick.

$6.00

TM-45 TM-STE TM-MC16 FM 21-150 FMFM 0-7 The Colt .45 Sten MK II SMG US Marine Corps M16A2 Field manual for United States Marine Auto Pistol Construction Manual Rifle Manual combatives hand-to-hand Corps Manual on 102 pgs. 6”x9” 118 pgs. 8 1/2”x11” Approx 140 pgs. 8 1/2”x11” combat. close-combat and hand- to-hand fighting. $13.95 $35.95 $35.95 $6.00 $6.00

117 VIDEOS, DVDS & POSTERS THE A-15 ARMORER’S COURSE BOOKS THE A-15 ARMORER’S COURSE/ DVD THE BLACK RIFLE - BLUE BOOK OF GUN EM16 RETROSPECTIVE VALUES Own an A-15 “Black Rifle”? AGI Armorer’s course teaches you how to BK-BR Retail . . . . .$59.95 BB-1 Retail . . . . .$34.95 keep it operating and repair most of the common failures. Understand step by step how the A-15 and it’s clones function including how the unique gas system works. Complete assembly and reassembly, lubrication, maintenance, feeding, trouble shooting, solutions and repairs are all explained and shown in eye-opening detail. Along with what critical spare parts are needed to keep on hand. Concludes with installation of a .22 LR conversion kit and a target shredding live fire full auto demonstration. Instructed by Robert Dunlap. 2 hours.

This 27th edition contains more firearms values and information than any other publication. Over 1950 pages containing 120,000+ firearm prices, DVD-TM Retail . . . . .$39.95 By R. Blake Stevens and Edward C. Ezell. over 3/4 million words of text - no other book is DVD Second enhanced edition, 1992. 416 Pages, even close! Contains all new 2006 makes/models 441 illustrations. as well as firearms pricing, information and detailed technical data on both new and A sweeping study of post-World War II US discontinued domestic, foreign and military guns, small arms developments-where the EM16 modern commemoratives and major trademark came from, what it is, and what it is not! antiques. DVD COURSE: DVD COURSE: EXPLODED DIAGRAM/ THE AR-15 TRIGGER JOB BUILDING AN AR-15 FROM A KIT PANTHER RIFLE

DVD-TR Retail . . . . .$39.95 DVD-KT Retail . . . . .$39.95 Retail ...... $3.95 ED-RIFLE = PANTHER CLASSIC RIFLE ED-CAR = PANTHER CARBINE RIFLE

PANTHER CLASSIC

Learn to build a legal A-15 from a kit the easy way without making common costly mistakes. Using parts from several of the top A-15 manufacturers, Robert Dunlap takes you through the entire process of The A-15 is now used extensively in both shooting matches and building up a lower receiver from scratch. Including parts identification, competitions around the country. The heavy barrel flattop models also installing and fitting all the parts, head spacing the barrel, final assembly make excellent varmint rifles. But whether you are shooting in formal and tuning. A number of after market accessories are covered along with 11” x 17” poster sized diagram of the exploded competitions or just plinking, you want a good, clean, safe trigger pull. examples and demonstrations of the tools required to make the job easy. view of the Panther™ Classic or Panther ™ This course will show you how to accomplish this goal. 2 hours. No Hard Case. Carbine rifle. MATT BURKETT’S PRACTICAL SHOOTING DVD LIBRARY

Join Matt Burkett and Kevin Elpers as they teach you the ins and outs of shooting. The eight DVD’s guide you in your quest to become a better shooter and competitor. Volumes 1-3 discuss Handgun Techniques, Volume 4 covers How to Shoot Faster, Volume 5 teaches you the secrets of Winning IDPA Techniques, Volume 6 will unlock the mysteries of The AR-15, Volume 7 will remind you How To Practice and Matt’s newest DVD, Volume 8 will teach you how to be a Shotgun Master! Learn from one of the best shooters today, buy one or all eight volumes. For more information visit www.mattburkett.com. MATT BURKETT DVD: Vol. 1-3 MATT BURKETT DVD: Vol. 5 MATT BURKETT DVD: Vol. 7 HANDGUN TECHNIQUES WINNING IDPA TECHNIQUES HOW TO PRACTICE

MANUALS/VIDEOS/DVDS VD-MB13 Retail . . . . .$39.95 VD-MB5 Retail . . . . .$39.95 VD-MB7 Retail . . . . .$39.95

MATT BURKETT DVD: Vol. 4 MATT BURKETT DVD: Vol. 6 MATT BURKETT DVD: Vol. 8 HOW TO SHOOT FASTER THE AR-15 SHOTGUN MASTERY

VD-MB4 Retail . . . . .$39.95 VD-MB6 Retail . . . . .$59.95 VD-MB8 Retail . . . . .$39.95

118 .45 CALIBER PARTS

.45 CAL.

.45 PARTS

Retail (1) 45BA-01 Jarvis 1911 .45 ACP Barrel SST $119.00 (2) 45BB-01 Barrel Bushing 9.00 (3) 45BA-03 Barrel Link 3.00 (4) 45BA-02 Barrel Link Pin 1.00 (5) 45DS-01 Disconnector 9.00 (6) 45EJ-01 Ejector 6.00 (7) 45EJ-02 Ejector Pin 1.00 (8) 45EX-01 Extractor 12.00 (9) 45FP-01 Firing Pin 4.00 (10) 45FP-02 Firing Pin Spring 1.25 (11) 45FP-03 Firing Pin Stop 4.00 (12) 45SF-01 Front Sight 4.00 (13) 45GS-01 Grip Safety 15.00 (14) 45HS-02 Hammer 11.00 (15) 45HS-04 Hammer Pin 1.00 (16) 45HS-03 Hammer Strut 5.00 (17) 45HS-01 Hammer Strut Pin 1.00 (18) 45MG-01 Magazine, Blue 9.95 (18A) 45MG-02 Magazine, SST 11.95 (19) 45MG-03 Magazine Catch 14.95 (20) 45MG-04 Magazine Catch Lock 2.00 (21) 45MG-05 Magazine Catch Spring 2.00 (24) 45MS-07 Main Spring 6.00 (25) 45MS-03 Main Spring Cap 1.00 (26) 45MS-01 Main Spring Cap Pin 1.00 (27) 45MS-05 Main Spring Housing, Arched 20.00 (27A) 45MS-06 Main Spring Housing, Flat 20.00 (28) 45MS-02 Main Spring Retainer 1.00 (29) 45MS-08 Housing Pin Retainer 1.00 (30) 45RS-01 Recoil Spring Plug 6.00 (31) 45PT-02 Plunger Spring 3.00 (32) 45PT-01 Plunger Tube 6.00 (33) 45RS-04 Rear Sight 5.00 (35) 45RS-02 Recoil Spring 4.00 (36) 45RS-03 Recoil Spring Guide 4.50 (37) 45SL-01 Thumb Safety Lock 14.95 (38) 45SS-03 Safety Lock Plunger 1.00 (39) 45SR-01 Sear 9.00 (40) 45SR-02 Sear Pin 1.00 (41) 45SR-03 Sear Spring 6.00 (43) 45SS-01 Slide Stop 14.95 (44) 45SS-02 Slide Stop Plunger .75 (45-46) 45GP-01 Plastic Grip, Black or Brown 5.00 (47) 45GS-02 Grip Screw 1.00 (48) 45GS-03 Grip Screw Bushing 1.00 (49) 45TR-01 Trigger 18.00

.45 CUSTOM PARTS

Retail 3 (1) 45BB-NM Barrel Bushing Nat. Match $13.95 2 (Requires Fitting) 1 (2) 45AS-01 (BLUE) Ambidextrous Safety $32.95 45AS-01S (SST) Ambidextrous Safety $33.95 (3) 45ES-01 (BLUE) Extended Slide Stop $21.25 45ES-01S (SST) Extended Slide Stop $19.95 (4) 45ET-01 (BLUE) Extended Thumb Safety $15.95 6 45ET-01S (SST) Extended Thumb Safety $16.95 4 (5) 45GB-01 Recoil Spring Guide Buffers -6 pack $9.00 (.090” Thick Nylon) (6) 45CG-21 Clip Guide $7.00 7 (7) 45EM-01S (SST) Extended Mag Catch $18.95

5 119 .45 CAL. / 1911A1 PARTS, KITS & ACCESSORIES

.45 SAFETY & CLEANING ACCESSORIES .45 CAL. KITS .45 CAL CLEANING .45 SLIDE KIT .45 FRAME KIT ACCESSORIES 45KT-01 Retail . . . .$189.95 45BP-45-4 Retail ...... $7.00 45KT-02 Retail . . . . .$49.95 .45 CALIBER PARTS

3 separate pieces: The following parts are included • Cleaning Brush • Cleaning Rod in the Frame Kit: • Bushing Wrench Ejector Pin Main Spring Cap Sear .45 PISTOL Hammer Strut Pin Housing Pin Retainer Sear Spring CLEANING ROD Ejector Main Spring Retainer Slide Stop Disconnector Main Spring Housing (Flat) Slide Stop Plunger 45-CR Retail ...... $3.99 The following parts are included in the Main Spring Magazine Catch Lock Trigger Slide Kit: Hammer Pin Safety Lock Plunger Grip Screw Recoil Spring Firing Pin Main Spring Cap Pin Plunger Tube Grip Screw Bushing Recoil Spring Guide Firing Pin Stop Firing Pin Spring Hammer Grip Safety Plastic Grip Barrel Bushing Extractor Hammer Strut Magazine Catch Spring (Black or Brown) Barrel Link Front Sight Recoil Spring Thumb Safety Lock Barrel Link Pin Rear Sight 1/4” Diameter Steel Construction. Magazine Catch Plunger Spring .45 REPAIR KIT .45 SPRING KIT .45 PIN KIT .45 RECOIL GUIDE M1911A1 .45 CAL PARTS KIT 45BP-45-1 Retail . .$30.00 45BP-45-2 Retail . . .$8.00 45BP-45-3 Retail . .$13.00 45BP-45-5 Retail . .$17.50 45KT-1911 Retail .$219.95

Kit Includes: Main Spring Cap Pin, Main Spring Retainer, Main Spring Cap, Housing Pin Retainer, Barrel Link Pin, Magazine Catch Lock, Ejector Pin, Hammer Strut Pin, Sear Pin, LESS FRAME AND SLIDE Hammer Pin, Slide Stop With the addition of your slide and Sear, Extractor, Disconnector Plunger, frame to this parts kit, you will have a & Firing Pin. Mil-Spec. Product arrives All 6 Springs. Mil-Spec Safety Lock Extended Recoil Guide Assembly complete M1911A1. With a Jarvis 45 sealed in a clamshell. Plunger. ACP SST Barrel.

1911 ERGO GRIPS 1911 ERGO GRIPS JARVIS 1911 .45 ACP .45 AUTO ARMORER’S COURSE / DVD (TAPERED BOTTOM) (SQUARE BOTTOM) SST BARREL

45-E4501 Retail . .$22.00 45-E4500 Retail . .$22.00 45BA-01 Retail .$120.00 DVD-1911 Retail . .$39.95 DVD

Do you think you know the .45 Auto?! Without a doubt the 1911 is a top choice as a personal defense weapon or for building the latest race guns. But not many people really understand how this locked breech single action works. Seasoned gunsmiths who, after watching this Armorer’s course, admit, “gee…, I didn’t know that”. Wonder why after you have added that latest trick gadget, your .45 isn’t quite as reliable as it used to be? Learn about feed ramp design, lock-up, loose breech and extractor fit. Use Bob’s simple techniques to tune your .45 for maximum reliability and performance. You will see the inner workings of the .45 clearly demonstrated with a cutaway gun, ERGO grip panels for Standard and ERGO grip panels for Standard and 5” stainless steel barrel for the .45 as well as complete disassembly, cleaning, lubrication and reassembly, down to Commander 1911 pistols. Tapered Commander 1911 pistols. Square ACP. Made by Jarvis. the last part. Numerous special repairs and a frank evaluation of popular bottom. bottom for mag chutes/wells. accessories is also included. A “must have” dvd and is applicable to all makes, models and calibers of the 1911 “.45 Auto.” Instructed by Master Gunsmith Robert Dunlap. 2 hours. 120 s Thank You for ORDERING Your Patronage INFORMATION BY PHONE: Call 1-800-578-DPMS (3767). Have your credit card number, expiration date, daytime phone number and our part #(s) of products handy when you call. We recommend you order by phone so we can provide availability information. Credit card orders are charged immediately for product in stock. Credit cards are charged for backordered items when shipped. DPMS has the option to charge freight & COD on all back-ordered items. Call anytime Monday - Friday 8 am - 5 pm (CST).

BY MAIL: Fill out the order form and mail to: DPMS Firearms, LLC, 3312 12th Street SE, St. Cloud, MN 56304. Orders to P.O. Boxes, APO/FPO addresses, Canada and all U.S. possessions will be shipped Parcel Post. Overpayment: If your order is overpaid, we will send you a credit memo. You can redeem this on a future order or we will replace it with a check at your request.

BY FAX: You may fax your credit card or COD order 24 hours a day, 7 days a week to 1-320-258-4449.

INTERNET: Visit our website at www.dpmsinc.com or email [email protected].

DEALERS/MASTER DEALERS: A Dealer/Master Dealer program is available, contact DPMS at 1-320-258-4448 or fax inquiries to 1-320-258-4449. To execute dealer pricing you must forward a current copy of your FFL License and State Sales Tax Exemption or equivalent. All Dealers must have a current copy of FFL, signed in ink, on file before any order can be processed. Dealers must also have a copy of sales tax permit related to the firearms industry or signed exemption form on file for pick-up at our warehouse or for shipment to Minnesota dealers; otherwise we must charge 6.5% sales tax. To execute master dealer pricing each order must exceed $4,500.00. Please note that DPMS can only accept payment from a dealer (check, money order, credit card) when a dealer order is placed. DPMS will not accept payment from a retail customer if the order is to be shipped to a dealer.

METHOD OF PAYMENT: We accept Visa, MasterCard, American Express, and Discover (a DPMS 2% handling fee will apply for all credit cards, except on orders totaling more than $1000.00 at that point the handling charge will be waived), Cashier’s Checks, Cash and Money Orders. Personal and company checks are welcome but the shipment will be held for 3 weeks for clearance ($20.00 Charge on all returned checks; No exceptions). All payments in US funds only. Canadian customers must send U.S. funds drawn on a U.S. bank. COD orders are accepted for UPS delivery only. There is a COD fee of $9.50 per package. All COD orders must be paid by Certified Funds (Money Order or Cashier’s Check). Shipment due to customer neglect will be invoiced for the freight both ways plus a $20.00 handling fee. All orders are FOB St. Cloud, MN, USA. Orders received with insufficient allowance for shipping will be shipped freight collect. COD orders for company check must be approved by DPMS Credit Department.

EXPORT ORDERS: A U.S. State Department Export License is required for the following: Barrels and Barrel Assemblies, Firearms and Lower Receivers, Flash Hiders, Complete Breech/Bolt Carrier Assemblies. All other parts and accessories do not require an export license providing each order does not exceed $100.00 US dollars. Should the order exceed $100.00 US dollars then an export license must be applied for. For DPMS to apply for an export license we will need an original, signed copy of the foreign customer’s import license, a written signed purchase order with US pricing and a completed DSP-83 Form. Please allow 4-8 weeks for normal receipt of an approved US export license. A $75.00 document fee will apply to each export order over $100.00; Orders under $100.00 will have a $25.00 document fee. Catalogs $5.00. All export orders will be shipped freight collect.

SHIPPING INFORMATION: Next day delivery is usually available if the order is received by 12 pm CST. We are unable to accept air shipments for new accounts using credit cards. NOTE: All aerosols, flammable liquids, loaded ammo and primed brass can be shipped ground UPS only. All orders are FOB origin, when products leave DPMS, all responsibility for the products switches to the consumer. Freight charges include insurance fees.

PRICES, POLICIES AND TERMS: At DPMS we feel that our prices will give you the best quality for the lowest price. Prices, specifications and availability are subject to change without notice. Special orders other than what is shown in the catalog may have an additional charge, i.e. left-handed Arctic Panther: $92 for lefty. Printers errors (typographic, photographic and/or descriptive) are subject to correction. Due to local, state and fedaral laws, not all products are available in all areas. DPMS reserves the right to limit quantities shipped to dealers and master dealers. Actual shipping charges will apply.

WARRANTY: DPMS Firearms, LLC is unable to offer express warranty on our product line. However, DPMS, Inc. does recognize our responsibility towards implied warranty. DPMS Rifles will be serviced for a period of three (3) years after the rifle was purchased. The warranty applies towards defects in materials or workmanship of the rifle. DPMS Firearms, LLC will pay for all warranty repairs, at no charge to the consumer. Please supply a copy of the invoice for proof of purchase. The use of re-load ammunition, proof rounds or factory ammunition that exceeds initial SAAMI specifications voids any warranty. Any repairs or modifications not done by DPMS also voids any warranty. Rifles not assembled or built by DPMS are not covered by warranty even if a DPMS lower receiver is on the rifle.

WAREHOUSE PICKUP INSTRUCTIONS: Call in all orders in advance of pick-up; to avoid delay allow 48 hrs. for processing. Minimum orders for pick-up at our warehouse is $50.00. We regret that no retail sales or visitors allowed at plant without an appointment.

RETURN/REFUND/EXCHANGE INSTRUCTIONS: No merchandise will be accepted for return without a 12% restocking fee. Any merchandise returned COD will not be accepted; No exceptions. All returned merchandise must be accompanied by a copy of the invoice on which it was purchased. No merchandise will be accepted for return without a return authorization number clearly marked on box. This return number can be obtained from our order desk. Merchandise returned must be repacked in such a way as it is in saleable condition when received; no writing on internal boxes, etc. Remember to insure all shipments. Should you request a refund on the unused part we will send a refund check within 14 days after receipt of returned part, less 12% for restocking costs. Refunds are valid for 30 days from date of purchase. A copy of the sales slip is required.

DAMAGED MERCHANDISE INSTRUCTIONS: Call UPS Toll Free 1-800-CALL UPS/1-800-225-5877 and ask for a damage inspection. Save shipping cartons and documents. Call us and we will follow up to assure your satisfaction. For truck-lines freight damage instructions, call our office.

DELIVERY: Estimates of delivery are based on Seller’s information at the time of the order, and cannot be guaranteed, nor will Seller be responsible for any delays in performance including, but not limited to, fires, strikes, floods, accidents, delays of carriers, failure of Seller’s Suppliers to meet delivery promises, acts of God, war, riot, embargoes, acts of civil or military authorities, breakdown of machinery, storm or any other circumstances or cause beyond the control of the Seller in the reasonable conduct of its business.

CLAIMS: Any claim that goods have not conformed to specification will not be accepted without prior written authorization from Seller within fourteen (14) days of the receipt by Purchaser of such goods; otherwise, any such claims shall be deemed to have been waived by Purchaser. If Purchaser complies with the above notice requirements, Seller’s liability shall be limited to refunding the purchase price of the goods in question. No damages or charges of any kind, either of labor, expenses or otherwise, suffered by Purchaser in repairing or replacing goods will be allowed.

CHOICE OF LAW: These terms and conditions of sale shall be governed and construed in accordance with the law of the state of Minnesota.

CREDIT TERMS: Any unpaid balance over thirty (30) days will be charged a 1.5% penalty fee per month based on 18% annual percentage rate.

121 DPMS FIREARMS, LLC 3312 12th Street SE • St. Cloud, MN 56304 PHONE 1-320-258-4448 • FAX 1-320-258-4449 Business Hours: M-F 8 am - 5 pm Central Time 1-800-578-DPMS Orders Only Please (3767) www.dpmsinc.com • email: [email protected] Since 1986 Free Shipping with Internet Order!* ORDERED BY Is a signed Copy of FFL Name FFL Number on file with DPMS? YES NO Street Address If “NO” please enclose a copy.

City State Zip

Phone Number Fax Number Email Address PAYMENT METHOD Cashiers Check Money Order COD Credit Card:

Card Number Expiration Date

Signature SHIPPING Name Street Address City State Zip (Complete Only if different than above) SHIP VIA: UPS Ground UPS 2nd Day Air * UPS Next Day Air * Mail Priority Mail * * Additional Charges apply.

PAGE # ITEM # QUANTITY DESCRIPTION PRICE EACH TOTAL PRICE SET, PAIR, ETC.

*FREE SHIPPING WITH INTERNET ORDER!* DPMS offers free shipping with a $35 minimum order on all retail orders placed via the internet, the mail and by SUBTOTAL fax, COD orders do not apply. This offer applies to all products, excluding all firearms and lower receivers that must be purchased through a FFL dealer (firearms and lower receivers excluded from free shipping offer.) Orders must SHIPPING ship ground, via UPS, and only within the contiguous 48 states. In addition to free shipping, DPMS will waive the standard credit card administration fee for retail orders placed over the internet, by mail order or by faxed order. SALES TAX SHIPPING CHARGES: Shipping charges will be calculated according to UPS posted rates. The charge for UPS COD is $9.50 per box, and they will only accept money orders or cashiers checks as payment. There are also areas where UPS Rural TOTAL Surcharge may apply. There will also be a 2% DPMS administrative and handling fee for credit card charges that will be applied to the total, except on orders totaling over $1000.00 (fee waived at that time). Thank You!

DPMS makes every attempt to have all items in stock. If an item is backordered, it will be shipped as soon as possible via UPS. No additional COD charges will be charged on the backorder shipment. All “Adult Signature” fees, UPS “Residential” fees, etc. will be charged on backorder shipments. BACK ORDER: Do you wish to accept backorders if item is out of stock? YES NO 122 DPMS MERCHANDISE

DPMS CAMO & SOLID COLOR STOCKING CAPS DPMS WATCH CAP DPMS HAT

DPMS-SKU = Black DPMS-SKUC = Camel Brown Retail ...... $16.95 DPMS-SKW Retail . . . . .$16.95 CL-HAT Retail . . . . .$14.95 DPMS-SKUMC = Military Camo DPMS-SKUPC = Pink Camo

This year we’ve introduced 3 new stocking caps. Now available are Camel Brown, Military Rollover-style Black Stocking Cap with DPMS Black, 6-panel adjustable hat with the DPMS Camouflage and for the tactical lady, Pink Camouflage. Also available in original SWAT Black. logo embroidered on front of cap logo on front. DPMS “RIPPED BILL” HAT DPMS NUGENT HAT DPMS CAMO HAT

CL-HAT-OD Retail . . . .$19.95 CL-HAT-TAN Retail . . . .$19.95 Retail ...... $28.95 CL-HAT-CAMO Retail . . .$19.95 OD GREEN DESERT TAN NUGE1 = CAMO NUGE2 = BLACK

Desert Tan or OD Green, adjustable hat with the DPMS logo on front, the DPMS website on the Embroidered DPMS hat featuring Ted Nugent’s Camouflaged, 6-panel adjustable hat with the back and the American Flag on the right side of the hat. Features ripped bill with rifle embroidery. Spearchucker logo and an American flag. DPMS logo on front.

DPMS BLAZE ORANGE HAT DPMS VISORS DPMS BRAIDED CAP DPMS LADIES TANKTOP

CL-HAT-BLAZE Retail . . .$16.95 Retail ...... $14.95 Retail ...... $19.95 Retail ...... $29.95 CL-VISOR=Black CL-VISOR-T=Tan DPMS-BHB=Black DPMS-BHBR=Brown DPMS-LTB=Black DPMS-BHP=Pink DPMS-LTW=White DPMS-LTBB=Baby Blue DPMS-LTP=Pink DPMS MERCHANDISE

• Features: Dual Braided Chin Fastening Available in either Tan or Black, this adjustable System for Added Security in the Field visor has the DPMS logo embroidered on the Available in • Top Mounted No-Slip Carry Tassel for Just introduced by DPMS: the DPMS Blaze front. The DPMS website is displayed on the Small - XL. Secure Transport and High Speed Removal Orange Hunting Cap. Great for the tree stand adjustment strap on the back and the During High Stress Opperations or the local watering hole. This hat features the American Flag is embroidered on the right side Spaghetti Strap Tank with Built-In Bra. • Dual Side-Mounted Ear Warming Systems traditional Blaze Orange color, with the DPMS to complete these great visors. Available in Black, Baby Blue, White and Pink. for Added Warmth During Cold Weather logo embroidered on the front and the DPMS Features large DPMS logo on front. Operations. website on the rear adjustment strap. Perfect for outdoor summer competitions. • Durable Knit Construction From Water Please specify size when ordering. Resistant Wool/Nylon Blend 123 DPMS MERCHANDISE

DPMS SHORT SLEEVE T-SHIRT DPMS LONG SLEEVE OXFORD SHIRTS

DPMS logo on left front crest of shirt. Choice of Retail ...... $19.95 5 colors. Please specify size when ordering! Retail ...... $54.95 Available in 5 colors (tan, red, black, blue and DPMS-TSB = Black cream) and 5 sizes (small to 3XL)! Tan - DPMS-TA Red - DPMS-RD DPMS-TSOG = Olive Green Black - DPMS-BK Blue - DPMS-BL DPMS-TSW = White • Please Note: 2XL and 3XL are an additional $4.00. Cream - DPMS-CR DPMS-TSP = Pink Specify Size When Ordering

Black & White T-Shirts: • Please Available in Small - 3XL. Specify Size 2XL & 3XL for an When Ordering additional $3.50.

Olive T-Shirts: Available in Small - 2XL. 2XL for an additional $3.50.

DPMS POLO SHIRT DPMS HOODED SWEATSHIRT DPMS LONG SLEEVE T-SHIRT

Retail ...... $39.95 Retail ...... $55.95 Retail ...... $24.95

DPMS-PR=Red DPMS-PY=Yellow Front & Back Embroidery DPMS-PB=Black DPMS-PG=Gray DPMS-EHM = Medium DPMS-EHL = Large DPMS-EHXL = XL DPMS-LSTT=TAN DPMS-EH2X = 2XL DPMS-LSTB=BLACK

DPMS Polo Shirts feature the DPMS logo on the left front crest of shirt. Choice DPMS Long Sleeve of 4 colors. Please T-Shirts feature a specify size when small DPMS logo on ordering. the left front crest of shirt as well as a large logo across the back. Please specify DPMS-SHM = Medium size when ordering. DPMS-SHL = Large DPMS-SHXL = XL Available in DPMS-SH2X = 2XL Small - 3XL. Available in 2XL and 3XL for an Retail ...... $40.95 Small - 3XL. additional $3.50. Front Embroidery Only

DPMS SAFARI SHIRT DPMS CHAMPION SWEATSHIRT DPMS SWEATSHIRT

Retail ...... $44.95 Retail ...... $59.95 Retail ...... $39.95 DPMS-OL=OLIVE DPMS-KH=KHAKI DPMS-SG = Gray DPMS-SB = Black DPMS-CHL = Large DPMS-CHXL = XL

Available in Small - 3XL. 2XL & 3XL available for an additional $3.50

Available in Medium - 2XL. • Please Specify Size When Ordering 2XL for an additional $3.50. DPMS Safari Shirts feature the DPMS logo on the left front DPMS Champion Sweat Shirts feature the DPMS logo on the DPMS Sweat Shirts feature the DPMS logo on the left crest of shirt. Long Sleeve. left front chest of shirt. Long Sleeve and Hooded. front chest of shirt. Long Sleeve. Please specify size when ordering. Please specify size when ordering. Please specify size when ordering. DPMS MERCHANDISE 124 DPMS MERCHANDISE

STUFFED PANTHER DPMS CLEANING MAT DPMS MUG 12” DPMS CLOCK

DPMS-PANTHER Retail .$19.95 CM-05 Retail ...... $9.95 CL-MUG Retail ...... $4.00 CL-CL Retail . . . . .$16.95

18” stuffed black panther sporting a red scarf 15 1/2” x 20”, green fabric w/DPMS Patch. with the DPMS logo on it.

DPMS TACTICAL SHOT GLASS SILICONE CLEANING CLOTH BLACK DPMS LE BANNER

DPMS-SHOT Retail ...... $2.00 OC-01 Retail ...... $2.50 DPMS-BAN Retail . . . . .$19.95

"SWAT" Black in color. Made from high impact plastic and, unlike other shot glasses, will not break when Pre-coated silicone cloth. Use to clean and preserve your 5’ x 3’ banner with the DPMS logo/DPMS dropped. firearm from rust and corrosion Comes pre-packaged in a poly Law Enforcement logos. bag. DPMS logo is proudly printed on the cloth Great for after-mission celebrations.

DPMS QUARTZ WATCH DPMS WINE GLASS DPMS SST TRAVEL MUG DPMS LAPEL PIN

WW-01 Retail . . . . .$29.95 DPMS-WG Retail ...... $5.95 CL-SSMUG Retail ...... $10.00 LP-01 Retail ...... $5.95 DPMS MERCHANDISE

DPMS logo on face of standard “swept hand” DPMS Wine Glasses. Show you support DPMS Features high impact plastic handle and lid, DPMS logo on face of oval lapel pin. White watch. at those finer occasions! Sold individually. stainless steel body will not corrode or rust in the background with silver edges. harshest tactical environments.

125 3-GUN COMPETITION ACCESSORIES

CLEAR SHOTGUN EXTENSION TUBES (REMINGTON)

REM-OT13 Retail . . . .$104.95 REM-OT10 Retail . . . . .$75.95

REM-OT9 Retail . . . . .$68.95

REM-OT8 Retail . . . . .$62.95

All 4 come with spring and follower, barrel clamp not included.

A transparent acrylic magazine tube designed specifically for shotgun competitions and hunting. Now you can see exactly how many shots you have left and extend your firing capacity at the same time. Reduce or eliminate your need to stop and reload in competitions, while hunting or target shooting. The Clear Shotgun Extension Tube is made from super clear, high impact acrylic which is stronger, more transparent and lighter than glass. REM-OT13 = 13 Shell Tube 4 New models in 8, 9, 10 and 13 shell capacities are now available for Remington 870, 1100, 1187 and 105CTi in REM-OT10 = 10 Shell Tube addition to our 8 shell model for Benelli Shotguns. REM-OT9 = 9 Shell Tube REM-OT8 = 8 Shell Tube

CLEAR SHOTGUN EXTENSION TUBE (BENELLI)

BN-OT Retail . . . . .$94.95

An 8 shell transparent acrylic magazine tube designed specifically for shotgun competitions and hunting. Now you can see exactly how many shots you have left and extend your firing capacity at the SHELLS NOT INCLUDED! same time. Reduce or eliminate your need to stop and reload in competitions, while hunting or target shooting. The Clear Shotgun Extension Tube is made from super clear, high impact acrylic which is stronger, more transparent and lighter than glass.

Available for the Benelli Super90M1, Super90M2, the Super Black Eagle and Super Black Eagle II.

Includes spring and follower, barrel clamp not included.

ATI SHOTGUN SHOTSHELL HOLDER ATI SHOTGUN BARREL MAGAZINE CLAMP

ATI-SHO0500 Retail . . . . .$14.49 ATI-SMC1100 Retail . . . . .$9.49

Durable 5-shell carrier mounts easily with screws The barrel magazine clamp strengthens the on either side of a full length shotgun stock. connection of the shotgun extension tube to your Gives quick and easy access to five extra 12 shotgun. It includes a sling swivel stud, usable by gauge rounds. right or left-handed shooters. May alternatively be used to mount 1 inch diameter flashlights or Does not include shells. lasers.

Works great with all of the above shotgun extension tubes. 3-GUN ACCESSORIES 126 Log-in Now!

Browser Search Plug-In

RSS Feeds

The DPMS website launched in early November 2006. Since then, we’ve made some great improvements based on customer and dealer feedback. The most noticable change has been to our “Build Your Panther Rifle” process. Now you can build your dream rifle in seconds and place that order with a dealer of your choice from our Dealer Locator feature. Next on the list was an overhaul of the “Product Search” function. Not only can you search the entire DPMS store using keywords, now you don’t even need to be on our site to do it with the addition of the Browser Search Plug-In. DPMS also offers a New Products and a Clearance Items RSS Feed, helping you stay up to date with our ever changing product line-up.

There has never been a better time to visit DPMS online!