DOCSLIB.ORG

“Building Decades of Experience Into America's Rifle”

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
“Building Decades of Experience Into America's Rifle” © 2017 Windham Weaponry, Inc. “Building Decades of Experience into America’s Rifle” Catalog 2017 v.1 Windham Weaponry – Protecting Your Firearm Investment Backing up our commitment to producing the finest rifles possible, every Windham Weaponry rifle includes our Transferable Limited Lifetime Warranty - the best in the business! TRANSFERABLE LIMITED LIFETIME WARRANTY* Windham Weaponry, Inc. (WWI) will warranty all firearms manufactured by WWI against any and all manufacturer’s defects in material and workmanship which affect reasonable operation for the lifetime of the firearm to the purchaser. This warranty is transferable from the original purchaser to a subsequent buyer. Warranty is established by registering online at: http://www.windhamweaponry.com or by phone with our Customer Service Department at 855-808-1888. Warranty claims may be made by contacting Customer Service, either in writing or by phone for a Return Authorization number prior to delivering the unloaded firearm to Windham Weaponry, Inc., 999 Roosevelt Trail, Windham, Maine 04062, freight prepaid by the purchaser. Firearms and ammunition must be shipped separately. No COD shipments will be accepted. WWI will repair or replace only those parts determined to be defective by the factory. This warranty does not apply to normal wear and tear of any parts or protective finishes. The following are specifically excluded from coverage under this warranty and will cause said warranty to become null and void: Damage or malfunction resulting from accident, negligence, misuse or unauthorized repair or alteration; barrel obstruction; use of ammunition other than NATO and/or SAAMI specification new production ammunition; use of any hand loaded, reloaded, imported or factory re-manufactured ammunition; failure to provide reasonable and necessary maintenance as described in the Operator’s Manual accompanying the firearm; rust or corrosion; use of replacement parts other than parts authorized by WWI for use in WWI firearms; any unauthorized repair or any alteration, including of a cosmetic nature, performed on the firearm by an individual, organization, company or entity other than WWI; unreasonable or excessive use of the firearm. Any finished products that are not assembled at our facilities, or are assembled using imported or used parts. This includes complete rifle kits, upper receivers, lower receivers, barrel assemblies, etc. No implied warranties of any kind are made herein. Limited Lifetime Warranty does not apply to any accessory items. WWI assumes no liability for accidental or consequential damages. Some states do not allow the exclusion or limitation of accidental or consequential damages and therefore this limitation may not apply to you. * U.S. Customers Only. Windham Weaponry • 999 Roosevelt Trail • P.O. Box 1900 • Windham, ME 04062 Telephone: 207 893 2223 • Fax: 207 893 1623 • Sales Line: 855 808 1888 E-mail: [email protected] www.windhamweaponry.com © 2017, Windham Weaponry, Inc. The Windham Weaponry Limited Lifetime Warranty can be easily activated online (www.windhamweaponry.com), or by calling Toll-Free: 1-855-808-1888 By following the simple instructions on the Website Warranty Page, your Windham Weaponry Firearm’s Warranty will be in effect imediately upon completion. The Windham Weaponry Team is dedicated to ensuring your satisfaction with their fine products, and hope you enjoy them safely for many years. If you need parts, service or advice concerning your rifle, we are never more than a phone call away, and will be pleased to help you. New Models - New Calibers TABLE OF CONTENTS New Parts & Accessories! Why A Windham Weaponry Rifle? 2 New .450 Thumper - see Page 5 The Windham Weaponry Story 3 Welcome to our 2017 Catalog... .450 Thumper 5 To say that the past 12 month have been a roller coaster would be understatement, but its all been The MCS Multi-Caliber System 5 endlessly interesting. .308 Rifles 8 We have a new .450 big bore Thumper that should .300 Blackout Rifles 11 be just the tool for hog and other big game hunters. Our Multi-Caliber MCS System with 4 calibers 7.62 x 39mm Rifle 12 available in the same gun (.223 Rem. / 5.56mm The VEX-SS “Varmint Exterminators” 13 NATO; 7.62 x 39mm; .300 Blackout and 9mm) has The 20“ Gov’t. Type Rifle 14 taken off nicely, and you can buy additional components to grow your system as you want. The “CDI” Rifle 15 We’ve introduced a number of new .308 The “Dissipator” Rifles 16 models and that whole line has become one The “SRC” Rifles 17 of our strongest sellers. A .308 will effectively take all North American Big Game, so The “MPC” & “HBC” Rifles 19 hunters will appreciate our new 20” .308 The Carbon Fiber SRC 21 with its featured Magpul accessories. Way of the Gun Performance Carbine 22 Our Law Enforcement sales are Windham Weaponry Special Build Program expanding all the time as departments 22 discover the reliability and accuracy of The “AR” Pistols 23 the Windham line. WW Law Enforcement 24 And in international markets, we’re WW .308 Specific Parts 27 seeing growing interest and sales as the world discovers the quality of .308 Parts & Accessories 28 Maine-made Windhams. .308 Barreled Uppers / Barrels / Parts 30 With an ever increasing 300 Blackout Barreled Uppers / Barrels 32 selection of accessories and parts, if you have questions 7.62x39 Upper Assemblies / Barrels / Parts 33 about your rifle, don’t hesitate to .223/5.56 Upper Assemblies / Barrels / Parts 34 call our Sales / Customer AR15 Visual Guide & Small Parts 38 Service line Toll Free at 1-855-808-1888 Monday thru .223/5.56 Barrel Kits / Barrels / Barrel Parts 41 Friday from 8:30 am - 5:00 .223/5.56 Receiver Parts / Part Kits 46 pm (EST). Magazines & Magazine Accessories 48 We urge you to shoot responsibly, and we’d Forends & Parts 50 love to see photos of Pistol Grips & Parts 55 how you use your Buttstocks, Buttstock Parts & Accessories 55 Windham Weaponry rifle. Send them to: Sights, Scopes & Optics 59 Gunsmithing Tools & Supplies 64 [email protected] Best wishes from the entire... Windham Accessories & Apparel / Gift Certificates 69 WINDHAM WEAPONRY TEAM Order Form / Returns / Gunsmithing 76 Come to the Range! Our 12 lane indoor shooting range - the finest in Southern Maine - is equipped with state of the art Action Target Range Equipment, a Total Containment Bullet Trap, Hepa Air Filtration System, and Mancom Target Retrieval System. In this safe, clean and friendly environment, you can develop your firearms skills, shoot, train, and enjoy “range” time with friends. We offer a variety of firearms training courses with NRA Trained Instructors, a Women’s Shooting Club, and a Thursday Night Shooting League open to all skill levels. www.WindhamIndoorShootingRange.com • www.facebook.com/WindhamIndoorShootingRange 999 Roosevelt Trail • Windham, ME 04062 • Tel.: 207-892-0274 Windham Weaponry Value... Why a Windham Weaponry rifle is your best firearms value: ★ LIFETIME WARRANTY - transferable to any future owner. ★ AN EXPERIENCED TEAM - dedicated to quality Customer Service. We service what we sell! - and many other brands as well. Our superior AR type rifles are built in the State of Maine by experienced people who care. ★ BARRELS - of 4150 Chrome Moly Vanadium 11595E Steel with Chrome Lining in Bore and Chamber for long wear and ease of cleaning. Standard barrels are chambered for 5.56 NATO ammo, and are safe for both .223 and 5.56 NATO. Air Gauging is a standard step to help ensure accuracy. Final finish is military grade Black Manganese Phosphate for protection against rust and corrosion. On Varmint models, barrels are Precision 416R Stainless Steel, Fluted, with a Matte Finish. That barrel features a Compass Lake Specification Firing Chamber with Matched Bolt. ★ HANDGUARDS - we use the superior M4 Double Heat Shielded Handguards on most models. Varmint rifles are fitted with custom aluminum free-float forends. ★ ALL PARTS MADE IN THE USA - and “Q-C’d” in the factory by experienced professionals. ★ BARREL EXTENSIONS - All WW .223/5.56mm models are machined with the reliable M4 Feed Ramps for consistent cartridge feeding. Other calibers are engineered to provide optimal feeding of all appropriate ammunition. ★ BOLTS - machined of Carpenter 158 Steel for strength and durability. ★ BOLT CARRIERS - Chrome Lined inside for durability, and machined from highest quality steel. Chrome Lined Gas Keys are staked on by our professional Gunsmiths. ★ TRIGGERS - are precision machined before being finished in Black Manganese Phosphate - then ground with a sharp release lip for smooth take up and a crisp release. ★ TRIGGER GUARD - a premium Aluminum Trigger Guard. Much stronger than plastic varieties - is standard on many of our rifles. ★ RECEIVERS - CNC machined from Forged 7075 T6 Aircraft Aluminum - bead blasted to a matte surface before final finishing in Hardcoat Black Anodize. We also mold receivers of a Carbon Fiber / Polymer Matrix - with 40% Carbon Fiber content. ★ SAFETY SELECTOR INDICATOR MARKINGS are shown on both sides of the Lower Receiver for added safety. ★ WINDHAM WEAPONRY EXTRA VALUE - All our rifles are packaged with a high quality magazine, a foam lined, hard plastic carrying case, a yellow chamber plug/safety tool, a 52” black nylon sling, and a full color, photo Made In illustrated Operating / Safety Manual. The U.S.A. 2 © 2017, Windham Weaponry, Inc. The Windham Weaponry Story... In 2011, a team of the finest firearms manufacturers in the U.S.A. was reassembled to bring to market the highest quality AR type rifle possible. These good Maine folks - most of whom are former employees of Bushmaster Firearms - offer many years of experience in the industry, and all look forward to working with you, to serving your needs, and to building you a great rifle. When the people who bought Bushmaster in 2006 decided to move it “lock, stock and barrel” out of Maine to New York in 2011, the original Bushmaster owner, Mr.
Load more

Recommended publications
  • XPS2™ HWS® (HOLOGRAPHIC WEAPON SIGHT) See Inside Cover for Distribution Statement
    OPERATOR’S MANUAL FOR XPS2™ HWS® (HOLOGRAPHIC WEAPON SIGHT) See inside cover for distribution statement. XP1956 EOTech Technical Manual ver. B MARCH 2018 An L-3 Company DISTRIBUTION STATEMENT: Distribution is authorized to U.S. Government agencies and their contractors. This publication is required for administration and operational purposes. Additional copies of this document can be found on the manufacturer’s website. Written requests must be referred to: L3® EOTECH® Service Dept. Attn: TM Request 1201 E. Ellsworth Rd. Ann Arbor, MI 48108 (734)741-8868 x2176 [email protected] • This commodity is controlled under the Export Administration Regulations (EAR), ECCN 0A987, and may not be exported to a Foreign Person, either U.S. or abroad, without a license or exception from the U.S. Department of Commerce. WARNING WEAPON SAFETY: Prior to mounting the HWS on your weapon, be sure the weapon is cleared. If you are not sure how to clear your weapon, please see the accompanying operator’s manual for the weapon platform you are mounting the sight on. LASER SAFETY: The HWS is a Class II laser product. The Class II level illuminating beam, however, is completely blocked by the housing. The only laser light accessible to the eye is the image beam and is at a power level within the limit of a Class IIa laser product. The illuminating beam can become accessible to the eye if the housing is broken. Turn the sight off immediately and return the broken unit to the factory for repair. FCC COMPLIANCE: The HWS complies with Part 15 of the FCC Rules.
    [Show full text]
  • Twilight 2000
    TWILIGHT 2000 Twilight 2000 is a Role playing game set in a fictional future, one where World war 3 began in the late 1990's and eventually slipped into a nuclear exchange changing society as we know it. The players assume the roles of survivors trying to live through the aftermath of the war. Twilight 2000 was published in the mid 1980's by Game Designers Workshop who unfortunately closed their doors in the early 1990's. The copyright was purchased by Tantalus, Inc but there are no stated plans to revive the game. Despite the lack of any new material from a publisher the game continues to expand through the players on websites such as this. This is my contribution to the game, this site will be in a constant state of change, I plan to add material as I get it finished. This will include new equipment, optional rules, alternate game backgrounds and other material as it accumulates, currently I am working on source material for a World war 2 background, but I also have been completing some optional rules of my own as well as modern equipment. For other perspectives on Twilight 2000 visit the links listed at the bottom of this page. Twilight 2000 World war 2 material World war 2 source book Twilight 2000 Modern equipment Modern equipment Optional rules for Twilight 2000 Fire Links to other Twilight 2000 pages Antennas T2K Page: Focusing on Sweden's forces, equipment and background, also includes archives of discontinued sites and web discussions. The Dark place: Includes material for several RPG's including Twilight 2000 and Behind Enemy Lines.
    [Show full text]
  • Exps3-4 User Manual
    OPERATOR’S MANUAL FOR EXPS3™ HWS® (HOLOGRAPHIC WEAPON SIGHT) See inside cover for distribution statement. EOTech Technical Manual ver. F JUNE 2015 An L-3 Company DISTRIBUTION STATEMENT: Distribution is authorized to U.S. Government agencies and their contractors. This publication is required for administration and operational purposes. Additional copies of this document can be found on the manufacturer’s website. Written requests must be referred to: L-3® EOTech® Service Dept. Attn: TM Request 1201 E. Ellsworth Rd. Ann Arbor, MI 48108 (734)741-8868 x2176 [email protected] • This commodity is controlled under the Export Administration Regulations (EAR), ECCN 0A987, and may not be exported to a Foreign Person, either U.S. or abroad, without a license or exception from the U.S. Department of Commerce. WARNING WEAPON SAFETY: Prior to mounting the HWS® on your weapon, be sure the weapon is cleared. If you are not sure how to clear your weapon, please see the accompanying operator’s manual for the weapon platform you are mounting the sight on. LASER SAFETY: The HWS® is a Class II laser product. The Class II level illuminat- ing beam, however, is completely blocked by the housing. The only laser light acces- sible to the eye is the image beam and is at a power level within the limit of a Class IIa laser product. The illuminating beam can become accessible to the eye if the housing is broken. Turn the sight off immediately and return the broken unit to the factory for repair. FCC COMPLIANCE: The HWS® complies with Part 15 of the FCC Rules.
    [Show full text]
  • OPMODTM Introduces the L-3 Eotech Limited Edition OPMOD
    FOR IMMEDIATE RELEASE OPMODTM introduces the L-3 EOTech Limited Edition OPMOD™ EXPS2 Holographic Weapon Sight available exclusively at OpticsPlanet OpticsPlanet Releases Latest Product from their OPMODTM division of exclusive and innovatively designed optics products. Northbrook, Illinois – June 29, 2010 – OpticsPlanet Inc. (www.opticsplanet.com), the largest specialized retailer of sport optics, tactical and military gear, binoculars, rifle scopes, and sunglasses, announced the release of the L-3 EOTech Limited Edition OPMOD™ EXPS2 Holographic Weapon Sight. The new sight is available exclusively at OpticsPlanet.com and Tactical-Store.com. Through a collaborative effort, OpticsPlanet, Inc.’s OPMOD™ team and L-3 EOTech’s premier engineering and marketing teams pinpointed the exact product innovations end- users were looking for in a holographic weapon sight. Based on the original award winning L-3 EOTech XPS2 Holographic Weapon Sight, the L-3 EOTech OPMOD™ Limited Edition EXPS2 Holographic Red Dot Sight offers a unique combination of features not available on any other EOTech model. Features available exclusively on the OPMOD™ sight include a 7mm raised base to allow lower 1/3 co-witness, easily accessible side buttons, and a single quick detach throw lever. The sight is available with two different reticle options; the EXPS2-0 features a reticle pattern with 65 MOA ring and 1MOA dot and the EXPS2-2 features a reticle pattern with 65 MOA ring and two 1MOA dots. About OPMOD™: OPMOD™, a division of Optics Planet, Inc., in conjunction with the top engineering and marketing teams in the industry aims to provide revolutionary new products tailored to the highest performance standards required by our armed forces and shooting enthusiasts.
    [Show full text]
  • Optics & Acc 270-277
    AIMPOINT Item AIMPOINT OPTICS & ACCESSORIES INDEX PATROL RIFLE OPTIC Micro T-2 RED DOT SIGHT Red Dot Sights ..................270-275 Scope Accessories ...............275-276 Rugged, Reliable & Versatile - Enhanced, Night Vision Compatible Always Ready Edition Of This Popular Red Dot The Micro T-2 is a redesigned, Parallax-free, non-magnifying red upgraded evolution of the original BURRIS dot sight is ready at all times, with no T-1 that adds compatibility with all switches or levers to fumble with. Sim- generations of night vision devices RED DOT REFLEX SIGHTS after 8 hours help keep you from running out of power at the wrong ply install the supplied battery, turn the (NVD). The T-2 retains the original’s time. Windage and elevation adjustments can be made quickly PRO on, and forget about it – for up ruggedness and reliability, while add- Fast, Precise Heads-Up Sighting; with a coin - no special tool needed - with a 3° (190" at 100 yards) to 3 years! 2 MOA center-dot, with 6 ing a unique coating on the front lens Ultra-Robust Design Handles adjustment range. Available with 3 or 8 MOA dot, with or without daylight and 4 night vision brightness that reflects the 2 MOA dot’s red light Magnum-Power Recoil quick-attach/detach Picatinny mount. settings, enables accurate target en- at nearly 100% efficiency to give the highest possible dot clarity SPECS: Aluminum, stainless steel, and bronze, matte black finish. 1.9" gagement under a broad variety of conditions. Includes a detach- and brightness. This provides a remarkably clear image when used OPTICS & ACCESSORIES FASTFIRE II - Provides fast, both-eyes- (48.2mm) long x 1" (25.4mm) wide x 1" high.
    [Show full text]
  • Small Arms for Urban Combat
    Small Arms for Urban Combat This page intentionally left blank Small Arms for Urban Combat A Review of Modern Handguns, Submachine Guns, Personal Defense Weapons, Carbines, Assault Rifles, Sniper Rifles, Anti-Materiel Rifles, Machine Guns, Combat Shotguns, Grenade Launchers and Other Weapons Systems RUSSELL C. TILSTRA McFarland & Company, Inc., Publishers Jefferson, North Carolina, and London LIBRARY OF CONGRESS CATALOGUING-IN-PUBLICATION DATA Tilstra, Russell C., ¡968– Small arms for urban combat : a review of modern handguns, submachine guns, personal defense weapons, carbines, assault rifles, sniper rifles, anti-materiel rifles, machine guns, combat shotguns, grenade launchers and other weapons systems / Russell C. Tilstra. p. cm. Includes bibliographical references and index. ISBN 978-0-7864-6523-1 softcover : acid free paper 1. Firearms. 2. Urban warfare—Equipment and supplies. I. Title. UD380.T55 2012 623.4'4—dc23 2011046889 BRITISH LIBRARY CATALOGUING DATA ARE AVAILABLE © 2012 Russell C. Tilstra. All rights reserved No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or recording, or by any information storage and retrieval system, without permission in writing from the publisher. Front cover design by David K. Landis (Shake It Loose Graphics) Manufactured in the United States of America McFarland & Company, Inc., Publishers Box 611, Jefferson, North Carolina 28640 www.mcfarlandpub.com To my wife and children for their love and support. Thanks for putting up with me. This page intentionally left blank Table of Contents Acronyms and Abbreviations . viii Preface . 1 Introduction . 3 1. Handguns . 9 2. Submachine Guns . 33 3.
    [Show full text]
  • 558 HWS Manual
    OPERATOR’S MANUAL FOR 558™ HWS® (HOLOGRAPHIC WEAPON SIGHT) See inside cover for distribution statement. N1981 EOTech Technical Manual ver. B MARCH 2018 An L-3 Company DISTRIBUTION STATEMENT: Distribution is authorized to U.S. Government agencies and their contractors. This publication is required for administration and operational purposes. Additional copies of this document can be found on the manufacturer’s website. Written requests must be referred to: L3® EOTECH® Service Dept. Attn: TM Request 1201 E. Ellsworth Rd. Ann Arbor, MI 48108 (734)741-8868 x2176 [email protected] • This commodity is controlled under the Export Administration Regulations (EAR), ECCN 0A987, and may not be exported to a Foreign Person, either U.S. or abroad, without a license or exception from the U.S. Department of Commerce. WARNING WEAPON SAFETY: Prior to mounting the HWS on your weapon, be sure the weapon is cleared. If you are not sure how to clear your weapon, please see the accompanying operator’s manual for the weapon platform you are mounting the sight on. LASER SAFETY: The HWS is a Class II laser product. The Class II level illuminating beam, however, is completely blocked by the housing. The only laser light accessible to the eye is the image beam and is at a power level within the limit of a Class IIa laser product. The illuminating beam can become accessible to the eye if the housing is broken. Turn the sight off immediately and return the broken unit to the factory for repair. FCC COMPLIANCE: The HWS complies with Part 15 of the FCC Rules.
    [Show full text]
  • TL7 Handguns
    Deep Web Secret Deep Web Secret Automatic Pistols These weapons use Guns(Pistol)/TL7 skill. AMT Automag .44 AutoMag (Holdout -2) AMT Original Automag: A large single action semi automatic weapon, this is the original Automag by Harry Sanford. When it was introduced in the seventies this was the first pistol to fire high powered magnum cartridges. Clint Eastwood takes a break from his .44 Magnum to use the .44 Automag in one of his Dirty Harry films. It has been out of production for close to two decades now, but after Harry Sanford died in early 1999 the AMT factory was sold off, and the new owners decided to run a limited series of original Automags in the .44 AMP caliber. These guns will be exact copies of the original guns. This may also mean that they will only function properly with full powered loads, and that some parts (most notably the extractor) will be somewhat fragile. Most likely these guns will seldom be fired anyway, as they are instant collectors items due to their reputation and their flashy, sleek and slightly futuristic looks. Should these guns be used they will look very intimidating and at the same time classy, combined with a lot of recoil... The Automag is a recoil operated pistol, is made entirely of stainless steel, and these new guns are of excellent quality, unlike some of the last pistols made in the seventies. They are very accurate. The magazine holds seven rounds of .44 AMP ammo. AMT Automag III (Holdout -2) A large single action semi automatic weapon, this is the brainchild of Harry Sanford, creator of the original automag.
    [Show full text]
  • “Building Decades of Experience Into America's Rifle”
    Catalog 2016 v.1 Complete MCS System .223 Upper MCS .300 Blackout Barrel MCS 9mm M4 Barrel Bolt & Magazine MCS 7.62x39 Barrel Bolt Carrier & Magazine MCS System Lower with Telestock 7.62x39 for AK type Mags 9mm .223/5.56 -.300 - 7.62x39 MCS System Magazine Wells © 2016 Windham Weaponry, Inc. “Building Decades of Experience into America’s Rifle” Windham Weaponry – Protecting Your Firearm Investment Backing up our commitment to producing the finest rifles possible, every Windham Weaponry rifle includes our Transferable Limited Lifetime Warranty - the best in the business! TRANSFERABLE LIMITED LIFETIME WARRANTY* Windham Weaponry, Inc. (WWI) will warranty all firearms manufactured by WWI against any and all manufacturer’s defects in material and workmanship which affect reasonable operation for the lifetime of the firearm to the purchaser. This warranty is transferable from the original purchaser to a subsequent buyer. Warranty is established by registering online at: http://www.windhamweaponry.com or by phone with our Customer Service Department at 855-808-1888. Warranty claims may be made by contacting Customer Service, either in writing or by phone for a Return Authorization number prior to delivering the unloaded firearm to Windham Weaponry, Inc., 999 Roosevelt Trail, Windham, Maine 04062, freight prepaid by the purchaser. Firearms and ammunition must be shipped separately. No COD shipments will be accepted. WWI will repair or replace only those parts determined to be defective by the factory. This warranty does not apply to normal wear
    [Show full text]
  • Tactical, Accuracy, Confidence
    Tactical • Accuracy • Confidence Tactical, Accuracy, Confidence Supporting You with Hundreds of Mounting Solutions and Firearm Accessories 1-800-428-9394for the Military, LE Professional, Sport and Competitive Community 1 New for 2013 Featured Sections 4 Scope Rings & Mounts Weaver, A.R.M.S., PRI 9 AR Rail & Accessories A.R.M.S., Samson & Magpul 21 Mini 14 Accessories Tapco, ATI AP Custom Carbon-fiber Free-Float Handguards The AP Custom handguard is a carbon-fiber free float 23 AK Accessories tube with all of the mounting hardware included. Our Tapco, Samson & ATI carbon-fiber tubes attach to the gun using our proprietary trunnion and a standard, mil-spec barrel nut. No special tools or epoxies are need to secure your handguard. The 25 H&K Accessories carbon-fiber tubes are slotted at 2,3, 6, 9, and 10 o’clock. A.R.M.S., Samson, MFI The slots double as heat vents and purchase points for our 2 and 4 in. Picatinny rail sections. Page 13 26 M14/M1A Accessories Trijicon SRS - Sealed Reflex Sight 1.75 MOA A.R.M.S. & Sadlak Ind. The Trijicon SRS (Sealed Reflex Sight) represents the highest level of performance from a sealed reflex-style sight. Because of its innovative design, the SRS takes up less rail space while maintaining the durability expected from Trijicon. The shorter 26 FAL Accessories housing eliminates the tube-effect typical of other sealed reflex sights. Featuring a Magpul, A.R.M.S., & Tapco large 28mm aperture, the Trijicon SRS provides a massive field of view for quicker target engagements.
    [Show full text]
  • Shooting Accessories & Parts Spec Ops Gen NRS II Stock with Forend
    Spec Ops Gen NRS II Stock with Forend SpecOps NRS Shotgun The SpecOps NRS Gen II offers law enforcement officers, hunters, Butt Stock & Forend and general shooting enthusiasts a performance packed shotgun The SpecOps NRS is the perfect stock for those stock with adjustable length, ergonomic pistol grip, and durable desiring the high-quality features and related benefits polymer construction. This stock is ideal for of the SpecOps Stock minus the integrated recoil shooters seeking to improve firearm control, compensation systems. ensure proper fit, and increase overall Featuring adjustable length-of-pull at an shotgun effectiveness. Take your shotgun to economical price, this stock can be the next level with the SpecOps NRS Gen II! adjusted to fit any-size shooter in a matter • Ergonomic pistol grip with rubber grip of seconds. The SpecOps NRS is also inserts for secure grip available in bright orange for use with • Rapid adjust 7 position stock to fit all designated less-than-lethal shotguns. shooters (LOP 11.25” to 15”) • Durable polymer construction for years of • Lightweight durable polymer construction rugged use • Integrated ambidextrous single point sling plate • All weather performance and reliability • 11.25" to 15.25" length-of-pull (five adjustment positions with • Easy installation • Non-Recoil Suppressing Stock • Includes matching forend four inches of adjustment to fit all shooters) Remington Spec Ops II Stock w/ Forend NRS.....................C14XOK30100C • Corrosion-resistant materials for use in all weather conditions
    [Show full text]
  • May 2020 Fewer Fonts.Qxp Layout 1 4/7/20 9:41 AM Page 1
    May 2020 Fewer Fonts.qxp_Layout 1 4/7/20 9:41 AM Page 1 May 2020 the $2.99 U.S./$3.99 Canada BlueBlue PressPress SCAN TO SHOP May 2020 Fewer Fonts.qxp_Layout 1 4/7/20 9:41 AM Page 2 Stock # NEW 750 PACKAGE 9 (Pictured) $1453.87 Stock # NEW 750 PACKAGE 556 $1488.86 Stock # NEW 750 PACKAGE COMBO $1843.80 (If you’d like a similar package in a different caliber, please call.) 2 800-223-4570 • 480-948-8009 • bluepress.com Blue Press May 2020 Fewer Fonts.qxp_Layout 1 4/7/20 9:41 AM Page 3 New-Reloader XLXL 750 750 Package You’ve made the decision that loading your own ammunition is right for you. You’re ready to pull the trigger, but uncertain of exactly what you need. Dillon has taken the work out of this. We have assembled a New-Reloader Package, featuring our new XL 750 reloading machine, with the most popular machine options, along with the accessories you’ll need to begin reloading immediately. This package is available in 9mm, .223/5.56mm, or BOTH. 9mm 750 Package: .223/5.56mm 750 Package: XL 750 in 9mm XL 750 in .223/5.56mm 9mm Die Set .223/5.56 Die Set Bench Wrench Bench Wrench Small Pistol Casefeeder Small Rifle Casefeeder XL 750/650 Strong Mount XL 750/650 Strong Mount Bullet Tray Kit Bullet Tray Kit Roller Handle Roller Handle .223/5.56 Case Gage 9mm Case Gage Dillon Case Lube D-Terminator Digital Scale D-Terminator Digital Scale Primer Flip Tray Primer Flip Tray 4 Small Primer Pickup Tubes 4 Small Primer Pickup Tubes Digital Calipers Digital Calipers The Complete Reloading Manual for the 9mm Luger The Complete Reloading Manual for the .223 Rem.
    [Show full text]