DOCSLIB.ORG

Optics & Acc 270-277

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Optics & Acc 270-277 AIMPOINT Item AIMPOINT OPTICS & ACCESSORIES INDEX PATROL RIFLE OPTIC Micro T-2 RED DOT SIGHT Red Dot Sights ..................270-275 Scope Accessories ...............275-276 Rugged, Reliable & Versatile - Enhanced, Night Vision Compatible Always Ready Edition Of This Popular Red Dot The Micro T-2 is a redesigned, Parallax-free, non-magnifying red upgraded evolution of the original BURRIS dot sight is ready at all times, with no T-1 that adds compatibility with all switches or levers to fumble with. Sim- generations of night vision devices RED DOT REFLEX SIGHTS after 8 hours help keep you from running out of power at the wrong ply install the supplied battery, turn the (NVD). The T-2 retains the original’s time. Windage and elevation adjustments can be made quickly PRO on, and forget about it – for up ruggedness and reliability, while add- Fast, Precise Heads-Up Sighting; with a coin - no special tool needed - with a 3° (190" at 100 yards) to 3 years! 2 MOA center-dot, with 6 ing a unique coating on the front lens Ultra-Robust Design Handles adjustment range. Available with 3 or 8 MOA dot, with or without daylight and 4 night vision brightness that reflects the 2 MOA dot’s red light Magnum-Power Recoil quick-attach/detach Picatinny mount. settings, enables accurate target en- at nearly 100% efficiency to give the highest possible dot clarity SPECS: Aluminum, stainless steel, and bronze, matte black finish. 1.9" gagement under a broad variety of conditions. Includes a detach- and brightness. This provides a remarkably clear image when used OPTICS & ACCESSORIES FASTFIRE II - Provides fast, both-eyes- (48.2mm) long x 1" (25.4mm) wide x 1" high. .9 oz. (25g) wt. Runs on one able spacer that allows co-witnessing with the standard iron sights with a 3rd generation NVD and when used with an Aimpoint 3XMag open sighting on handguns, rifles, and CR-1632 Lithium battery. Includes battery, protective cover, mounting on AR-15/M16/M4 weapons. Or remove the spacer to install the magnifier. With 4 NVD-compatible brightness settings and 8 day- shotguns. Stainless steel and aluminum screws, wrench, and instructions. FastFire III is not compatible with the PRO on shotguns or submachine guns. Integrated “rail-grabber” light settings, including one extra-bright setting, the T-2 is ideal for housing handles the recoil of magnum AR-F3 FastFire Mount or the Picatinny Protector Mount. mount with knurled, oversized knob aids in quick attach/detach on ’round the clock operation hunters, sport shooters, military, and shotgun loads; installed weight under 2 #118-000-054AT 3 MOA FastFire III, Sight Only, ​ Picatinny rails. Compatible with all generations of night vision de- law enforcement. Robust extruded aluminum housing, matte black oz. allows mounting on semi-auto pistol slides. Gives a panoramic 8A239L00 � � � � � � � � � � � � � � � � � � � � � � � � $ 239.00 vices; may also be used with Aimpoint 3x Magnifier and Concealed anodized, with a mechanical control switch for added reliability. field of view and unlimited eye relief for an unobstructed view of Engagement Unit. Flip-up lens caps included. Runs on one CR-2032 lithium battery. 50,000-hour continuous- #118-000-052AT 3 MOA FastFire III, w/Picatinny 1 SPECS: Hard-anodized aluminum, black. 5 /4" (13.3cm) OAL. 3" (7.6cm) the area around the target. A high-intensity LED projects a 4 MOA Mount, 8A249I00 � � � � � � � � � � � � � � � � � 249.00 use battery life; 500,000 hours at NVD settings. The T-2 is available red sighting dot, while a light sensor and integrated control cir- high, including spacer. 13 oz. (368.g) wt. 1x magnification. 30mm tube alone, with an integral mount for installation on any rifle, shotgun, #118-000-055AT 8 MOA FastFire III, Sight Only, ​ dia. Unlimited eye relief. 2 MOA dot. Battery life: 30,000 hrs. Waterproof cuitry adjust the dot’s brightness. Coated lens resists scratches and 8A239P00 � � � � � � � � � � � � � � � � � � � � � � � � 239.00 or handgun with a Picatinny accessory rail, or with a quick-release scuffs and is parallax-free to 50 yards. 1.07x magnification aids to 150′ (45m) depth. One DL1/3N lithium battery, included. LRP Mount that is the correct height for co-witnessing with AR-15 in acquiring long-range targets, without compromising close-in #118-000-053AT 8 MOA FastFire III, w/Picatinny #100-009-902AT Aimpoint Patrol Rifle Optic, factory "iron" sights. Mount, 8A249I00 � � � � � � � � � � � � � � � � � 249.00 effectiveness. Set the point-of-impact with two flush-mounted 7A425G58 � � � � � � � � � � � � � � � � � � � � � � � � $ 437.00 #100-016-034AT Micro T-2 Sight w/Mount, screws that provide 3° (190" at 100 yards) windage and elevation AR-F3 FLATTOP FASTFIRE SIGHT - Fea- 7A675I84 � � � � � � � � � � � � � � � � � � � � � � � � � $ 776.00 adjustments using the included scale disc and adjustment tool. tures a Burris FastFire III 3-MOA dot optic, 100-018-346AT Micro T-2 Sight w/LRP Mount, Control switch on the left side resists accidental activation. Pow- enclosed in a specially designed mount that 7A809I17 � � � � � � � � � � � � � � � � � � � � � � � � � 874.00 ered by one 3-volt CR-2032 lithium battery, included; up to 5-year allows the unit to be attached to flattop up- battery life when used in Battery Saver mode. Gasket bottom plate AIMPOINT #100-018-550AT Micro T-2 Sight Only, No Mount, per receivers. Rugged aluminum mount po- 7A695K83 � � � � � � � � � � � � � � � � � � � � � � � � 751.00 seals unit 100% against water. Available with a mount that fits MIL- sitions the optic to co-witness iron sights on STD 1913 Picatinny rails. For other installations, sight and mounts Micro H-2 RED DOT SIGHT RED DOT SIGHTS RED DOT AR-style rifles. Attaches easily to Picatinny are available separately. ab A Compact Optic Built To Work Hard - 3 rails. SPECS: Sight - Steel, aluminum, optic-grade glass. 1 /4" (4.5cm) long, 1" And Keep Working (2.5cm) wide, 1" high. Includes snap-on cover, CR-2032 lithium battery, #118-000-067AT AR-F3 Flattop FastFire Sight, windage/elevation scale disc and adjustment tool. Mounts - Aluminum, 8A299Q00 � � � � � � � � � � � � � � � � � � � � � � � $ 299.00 Designed using feedback from Aimpoint AIMPOINT Magnifiers matte black. Mounting screws included. SHOTGUN SPEEDBEAD™ - Combines the proven customers who wanted a truly "hard core" #118-000-020AS FastFire II, only, 8A199M00 � � � � � � � � $ 199.00 compact red dot sight, the Micro H-2 has a Turns Red Dot Into Burris FastFire II red dot reflex sight with a steel Magnified Optic #118-000-019AS FastFire II, w/Picatinny Mount, mounting plate that installs easily between your reinforced aluminum housing and integral flip-up covers to protect the lenses so it'll 8A209A00 � � � � � � � � � � � � � � � � � � � � � � � � 209.00 shotgun’s stock and receiver to center the optic Aimpoint Magnifiers are de- directly in line with the rib. Provides approximately stand up to all types of environmental con- #118-000-013AS 1911 Standard FastFire Mount, ditions. Cutting-edge optics and lens coat- signed to mount behind Aimpoint 8A47A99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 4" of eye relief. In case of battery failure, simply look red dot sights and add magnification through the optic and use your front bead. ing deliver superior clarity of both the target #118-000-014AS 1911 Novak FastFire Mount, and the reticle dot itself, leading to faster to help with long-range aiming or SPECS: Steel, aluminum, optic-grade glass, plastic spac- observation. Won't cause zero shifts 8A47L99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 3 target acquisition and heightened shooter 6X-1 "Professional" ers, steel setscrews. 1 /4" (4.5cm) long, 1" (2.5cm) wide, 1" when mounted, or when used in a #118-000-015AS 1911 Bo-Mar/Kimber FastFire Mount, confidence. Of course, it's parallax-free, with high. Includes snap-on cover, CR-2032 lithium battery, flip mount. Professional models have 8A47G99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 unlimited eye relief, and 12 reticle brightness windage/elevation scale disc, adjustment tool and instructions. fully-armored bodies to protect against #118-000-011AS Glock FastFire Mount, 8A47J99 � � � � 47.99 settings you can adjust it to meet almost any #118-000-024AT SpeedBead, Rem 870, 8A249Q00 � � $ 249.00 lighting condition. Machined ramps on the impact, shock and the rigors of military or #118-000-012AS Springfield XD FastFire Mount, #118-000-025AT SpeedBead, Rem 1100/11-87, police operations, and have -3 to +3 di- 8A47Q99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 body provide snag-proof protection for the 8A249C00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00 windage and elevation turrets. Compatible optric adjustments to allow crystal-clear focus for any shooter's eye. Commercial #118-000-073AS S&W M&P FastFire Mount, 8A47G99 � � 47.99 #118-000-022AT SpeedBead, Benelli SBE II, with both Weaver and Picatinny rails or it can be piggy-backed on model delivers the same level of optical 8A249A00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00 to a larger optic. Fully waterproof to withstand whatever Mother 3X-C "Commercial" PICATINNY PROTECTOR MOUNT - Light- Nature dishes out. clarity with -2 to +2 dioptric adjustments, weight mount with raised “wings” protects your #118-000-023AT SpeedBead, Benelli M2, but at a more economical price. Available in fixed 3x or 6x powers. 3x 8A249J00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00 SPECS: Aluminum body, matte black. 1x magnification. 2.6" (6.6cm) long, FastFire
Load more

Recommended publications
  • XPS2™ HWS® (HOLOGRAPHIC WEAPON SIGHT) See Inside Cover for Distribution Statement
    OPERATOR’S MANUAL FOR XPS2™ HWS® (HOLOGRAPHIC WEAPON SIGHT) See inside cover for distribution statement. XP1956 EOTech Technical Manual ver. B MARCH 2018 An L-3 Company DISTRIBUTION STATEMENT: Distribution is authorized to U.S. Government agencies and their contractors. This publication is required for administration and operational purposes. Additional copies of this document can be found on the manufacturer’s website. Written requests must be referred to: L3® EOTECH® Service Dept. Attn: TM Request 1201 E. Ellsworth Rd. Ann Arbor, MI 48108 (734)741-8868 x2176 [email protected] • This commodity is controlled under the Export Administration Regulations (EAR), ECCN 0A987, and may not be exported to a Foreign Person, either U.S. or abroad, without a license or exception from the U.S. Department of Commerce. WARNING WEAPON SAFETY: Prior to mounting the HWS on your weapon, be sure the weapon is cleared. If you are not sure how to clear your weapon, please see the accompanying operator’s manual for the weapon platform you are mounting the sight on. LASER SAFETY: The HWS is a Class II laser product. The Class II level illuminating beam, however, is completely blocked by the housing. The only laser light accessible to the eye is the image beam and is at a power level within the limit of a Class IIa laser product. The illuminating beam can become accessible to the eye if the housing is broken. Turn the sight off immediately and return the broken unit to the factory for repair. FCC COMPLIANCE: The HWS complies with Part 15 of the FCC Rules.
    [Show full text]
  • Non-Magnifying Patrol Rifle Sights Summary
    August 2013 System Assessment and Validation for Emergency Responders (SAVER) Summary Non-Magnifying Patrol Rifle Sights (AEL reference number 03OE-02-BNOC) Non-magnifying sights aid in aiming patrol rifles and allow law enforcement officers to keep both eyes open, which provides a full field of view, enhances situational awareness, and helps users maintain depth perception. The U.S. Department of Homeland Security (DHS) established the System Assessment To provide responders with information on currently available non-magnifying and Validation for Emergency Responders patrol rifle sights, the Space and Naval Warfare Systems Center (SAVER) Program to assist emergency (SPAWARSYSCEN) Atlantic conducted a comparative assessment of these responders making procurement decisions. sights for the System Assessment and Validation for Emergency Responders Located within the Science and Technology (SAVER) Program in July 2012. Detailed findings are provided in the Directorate (S&T) of DHS, the SAVER Non-Magnifying Patrol Rifle Sights Assessment Report, which is available by Program conducts objective assessments request at https://www.rkb.us/saver. and validations on commercial equipment and systems, and provides those results along with other relevant equipment Assessment Methodology information to the emergency responder Prior to the assessment, eight law enforcement personnel were chosen from community in an operationally useful form. SAVER provides information on equipment various jurisdictions to participate in a focus group. All participants had that falls within the categories listed in the experience using non-magnifying patrol rifle sights. The focus group DHS Authorized Equipment List (AEL). identified evaluation criteria and recommended product selection criteria and The SAVER Program is supported by a possible scenarios for assessment.
    [Show full text]
  • Federal Court Between
    Court File No. T-735-20 FEDERAL COURT BETWEEN: CHRISTINE GENEROUX JOHN PEROCCHIO, and VINCENT R. R. PEROCCHIO Applicants and ATTORNEY GENERAL OF CANADA Respondent AFFIDAVIT OF MURRAY SMITH Table of Contents A. Background 3 B. The Firearms Reference Table 5 The Canadian Firearms Program (CFP): 5 The Specialized Firearms Support Services (SFSS): 5 The Firearms Reference Table (FRT): 5 Updates to the FRT in light of the Regulation 6 Notice to the public about the Regulation 7 C. Variants 8 The Nine Families 8 Variants 9 D. Bore diameter and muzzle energy limit 12 Measurement of bore diameter: 12 The parts of a firearm 13 The measurement of bore diameter for shotguns 15 The measurement of bore diameter for rifles 19 Muzzle Energy 21 E. Non-prohibited firearms currently available for hunting and shooting 25 Hunting 25 Sport shooting 27 F. Examples of firearms used in mass shooting events in Canada that are prohibited by the Regulation 29 2 I, Murray Smith, of Ottawa, Ontario, do affirm THAT: A. Background 1. I am a forensic scientist with 42 years of experience in relation to firearms. 2. I was employed by the Royal Canadian Mounted Police (“RCMP”) during the period of 1977 to 2020. I held many positions during that time, including the following: a. from 1989 to 2002,1 held the position of Chief Scientist responsible for the technical policy and quality assurance of the RCMP forensic firearms service, and the provision of technical advice to the government and police policy centres on firearms and other weapons; and b.
    [Show full text]
  • Red Dot Sight Owner's Guide
    RED DOT SIGHT OWNER’S GUIDE Model #: RXS100 10-20 G D F C E B A Included: A. Battery Door Tool B. W/E Adjustment Tool C. 3mm Hex Wrench for Mounting Screws D. CR2032 Lithium Battery E. Weaver Style Low-pro le Mounting Base F. Micro ber Cleaning Cloth G. Protective Shroud Cover Thank you for purchasing your new Bushnell® RXS-100 Red Dot Reflex Sight (illuminated optical sight). This manual will help you optimize your viewing experience by explaining how to utilize the sight’s features and how to care for it. Read the instructions carefully before using your sight. WARNING! : DO NOT LOOK AT THE SUN THROUGH THE OPTICS, AS PERMANENT EYE DAMAGE OR EVEN BLINDNESS MAY RESULT. ABOUT THE BUSHNELL® RXS-100 RED DOT REFLEX SIGHT The RXS-100 is a state-of-the-art reflex sight, designed for hunting, plinking and target shooting with pistols, rifles, and shotguns. It may be directly mounted to compatible pistol slides (or accessory mounts) with the Leupold DeltaPoint® footprint or it may be mounted to accessory rails using the included low-profile Weaver style mount. It features a battery life of more than 5,000 hours (at a typical brightness level of “3”)*, a 1-hour auto-timeout feature to prolong battery life (timer countdown resets if any button is pressed), battery access without unmounting, and a 4 MOA dot with 8 brightness settings. *Note: battery life in use will vary depending on the brightness settings used, freshness and quality of the battery, ambient temperature, and other factors.
    [Show full text]
  • Accuracy International AW Sniper Manual
    MODEL AW SNIPER 7.62 x 51 SNIPER RIFLE USERS MANUAL Accuracy International Limited P.O. Box 81 Portsmouth Hampshire, England PO3 5SJ Telephone: +44 (023) 9267 1225 Fax: +44 (023) 9269 1852 E-mail: [email protected] VAT No. GB 430-6893-46 BS EN ISO 9001 (1994) NATO Supplier No: U 4393 PDF created with FinePrint pdfFactory trial version www.pdffactory.com TABLE OF CONTENTS PARA CONTENTS PAGE Table of Contents 1 Technical Specification 3 Introduction 5 General Description 5 Safety Features 5 Safe Handling instructions 7 Operating Instructions 7 1 Safety Precautions 7 2 Assembling and Stripping the Rifle 8 2A Assembling 8 A1 Bipod 8 A2 Sight/Mount 8 A3 Bolt 8 A4 Magazine 9 2B Setting up the Rifle 9 2C Loading 10 2D Firing and operating the Bolt 11 2E Reloading 12 2F Unloading 12 2G To Unload a live Cartridge 12 2H Zeroing the Rifle 13 2I Zeroing Check List 14 2J Field Stripping 15 2K Additional Stripping and Assembling 15 2L To Strip the bolt 16 2M Re-Assembly of Bolt 16 2N Stripping the Magazine 16 2O Tests after Re-Assembly 17 3 Telescopic Sight 17 3A Eye Relief Adjustment 18 3B Elevation and Windage 18 3C Technical Details of AW’s 3-12x50 Sight 19 3D Iron Sights (when supplied) 20 3E Zeroing (disc type iron sights) 20 3F Zeroing (‘flip up’ blade type iron sights) 22 4 Bipod Adjustment and Use 22 5 Butt length Adjustment 23 6 Cleaning and Lubricating Instructions 23 7 Care after Firing 25 8 Inspection 25 9 Cleaning the Telescope 25 10 Accuracy and Ammunition 25 11 User Tips 26 12 Exterior Ballistic Data 27 13 Torque Settings for AW Rifle
    [Show full text]
  • Exps3-4 User Manual
    OPERATOR’S MANUAL FOR EXPS3™ HWS® (HOLOGRAPHIC WEAPON SIGHT) See inside cover for distribution statement. EOTech Technical Manual ver. F JUNE 2015 An L-3 Company DISTRIBUTION STATEMENT: Distribution is authorized to U.S. Government agencies and their contractors. This publication is required for administration and operational purposes. Additional copies of this document can be found on the manufacturer’s website. Written requests must be referred to: L-3® EOTech® Service Dept. Attn: TM Request 1201 E. Ellsworth Rd. Ann Arbor, MI 48108 (734)741-8868 x2176 [email protected] • This commodity is controlled under the Export Administration Regulations (EAR), ECCN 0A987, and may not be exported to a Foreign Person, either U.S. or abroad, without a license or exception from the U.S. Department of Commerce. WARNING WEAPON SAFETY: Prior to mounting the HWS® on your weapon, be sure the weapon is cleared. If you are not sure how to clear your weapon, please see the accompanying operator’s manual for the weapon platform you are mounting the sight on. LASER SAFETY: The HWS® is a Class II laser product. The Class II level illuminat- ing beam, however, is completely blocked by the housing. The only laser light acces- sible to the eye is the image beam and is at a power level within the limit of a Class IIa laser product. The illuminating beam can become accessible to the eye if the housing is broken. Turn the sight off immediately and return the broken unit to the factory for repair. FCC COMPLIANCE: The HWS® complies with Part 15 of the FCC Rules.
    [Show full text]
  • Trijicon® Iron Sights 2013 56 Trijicon Bright & Tough™ Night Sights Trijicon HD™ Night Sights Trijicon Trijidot®
    Trijicon® Iron Sights 2013 56 Trijicon Bright & Tough™ Night Sights Trijicon HD™ Night Sights Trijicon TrijiDot® Model GL101Y Glock® Pistol Featuring glowing, self-illuminated lamps for a distinctive shooting picture, Trijicon® Night Sights are the reliable choice for all light conditions, providing superior illumination and impressive accuracy. ™ ™ BRIGHT & TOUGH HD NIGHT SIGHTS TRIJIDOT® Model SA137O Smith & Wesson® M&P NIGHT SIGHTS Building on the strength, durability FIBER OPTIC Trijicon Bright & Tough Night and luminance of the Bright & SHOTGUN SIGHT Sights are three-dot iron sights Tough Night Sights, the new HD Trijicon is proud to offer this that increase night-fire shooting Night Sights were specifically rugged and effective bead sight accuracy by as much as five times created to address the needs of specifically designed for shotguns. over conventional sights. Equally tactical shooters. The front sight Utilizing Trijicon's fiber optic impressive, they do so with the features a taller blade and an technology and sapphire cap, the same speed as instinctive shooting aiming point ringed in fiber optic shotgun sight collects – and without the need photoluminescent paint. While ambient light to provide a brilliant for batteries. the rear sight is outlined in black aiming point in a wide range of and features a wider U-shaped lighting conditions. Constructed of Three tritium-filled phosphor notch. This unique configuration anodized 6061-T6 aluminum, it’s lamps provide the illumination for Model SG01 increases visibility and quickens built to withstand shotgun recoil, Bright & Tough Night Sights. Select SIG SAUER® SIG P225, 226, 228 front sight acquisition—even in elevated barrel temperatures and models also feature a white ring and 239 transitional lighting.
    [Show full text]
  • Download the May 2020 Newsletter Here
    MAY 2020 VOL 87 President’s Message Chapter 16 Newsleer Organizaon and Responsibilies: Editor: Glen Craig Secons: Message from the President: Stephen Durfee Treasurers Report: Willi Lindner Sec. Rpt (Staff Meeng Minutes): Mike Barkstrom Sick Call/Obituary: Chaplain Butch Hall Blast from the Past: Glen Craig Special Recognion: Mike Barkstrom Upcoming Events: Mike Barkstrom Calendar: Stephen Durfee Human Interest Story: Chapter at large SFA Naonal HQ Update: Stephen Durfee Aer Acon Report: Stephen Durfee Membership Info: Roy Sayer Adversements: Glen Craig A wise and frugal government, which shall restrain men from injuring one Suspense: another, shall leave them otherwise free to regulate their own pursuits of st industry and improvement, and shall not take from the mouth of labor the Newsleer published (Web): 1 of each bread it has earned. – Thomas Jefferson odd numbered month Respecully, (Special Forces Associaon Chapter XVI President) th Stephen P. Durfee (DOL) Booz, Allen, Hamilton Inc. Input due to editor: 20 of each Strategic and Operaonal Exercise Planner, Mid [email protected] even numbered month Personal Cell: 208‐530‐5472 Dra due to President: 30th of each Pastor Butch’s Corner even numbered month th Powerful stories, to be so short. Final Dra due 30 of each These twelve short stories are all very good stories and make us think even numbered month twice about the daily happenings in our lives as we deal with others!! 1. I asked my grandmother to define success in her own words, she said; "Success is when you look back at your life and the memories make you smile." 2.
    [Show full text]
  • C7 Family of Combat Weapons 2005-009-220
    10044S MAINTENANCE INSTRUCTIONS C7 FAMILY OF COMBAT WEAPONS 2005-009-220 COLT CANADA 1036 Wilson Avenue, Kitchener, Ontario, Canada, N2C 1J3 Tel: +1 519 893 6840 Fax: +1 519 893 3144 WWW.COLTCANADA.COM © 2005 Colt Canada Technical Publications & I.L.S (Integrated Logistic Support) - Do not reproduce in whole or in part without permission. 10044S TABLE OF CONTENTS PAGE PART 1 - INTRODUCTION . 1-1-1/1-1-2 Section 1 - General Information . 1-1-1/1-1-2 Purpose . 1-1-1/1-1-2 Scope . 1-1-1/1-1-2 Observations . 1-1-1/1-1-2 Section 2 - C7 Family Technical Specifications . 1-2-1 Table of Specifications . 1-2-1 PART 2 - APPARATUS AND TOOLS . 2-1/2-2 General . 2-1/2-2 PART 3 - REPAIR TECHNIQUES . 3-1-1/3-1-2 Section 1 - Repair Information . 3-1-1/3-1-2 General . 3-1-1/3-1-2 Lubrication . 3-1-1/3-1-2 Refinishing . 3-1-1/3-1-2 Cleaning . 3-1-1/3-1-2 Care and Servicing . 3-1-1/3-1-2 Torque Limits . 3-1-1/3-1-2 Section 2 - Repair Procedures . 3-2-1 Introduction . 3-2-1 Safety Precautions . 3-2-1 Proving Weapons “SAFE” . 3-2-2 COMPLETE WEAPON . 3-2-3 Disassembly Into Major Groups . 3-2-3 Reassembly of Major Groups . 3-2-5 BARREL AND UPPER RECEIVER ASSEMBLIES . 3-2-6 Separating the Barrel and Upper Receiver Assemblies . 3-2-6 Disassembling the Barrel Assembly . 3-2-10 Inspecting the Barrel Assembly .
    [Show full text]
  • 2020 Product Catalog Tm
    TM 2020 PRODUCT CATALOG TM SENTRY Products Group. We Live to Protect! 2 We are proud to introduce our 2020 product assortment featuring new products, new categories and further expansion of our tactical nylon line. While the nylon line had seen steady growth, a visit from a key customer in the summer of 2019 changed the pace of our development creating a combination of lightweight and configurable components with the flexibility to meet changing mission demands. For the latest project check out the Gunnar Series Plate carrier featured on page 10. Along with our nylon line developments the hybrid Hexmag magazine which combined the best attributes of metal and polymer technologies was launched to support the Glock 17. Additional platforms are in the works as we continue to expand the Hexmag line up. Whether you protect your home, family, or country, our commitment to you is simple – we will continue to produce the best, most innovative product on the market to enhance your experience. We are so confident that we back each product with a hassle- free Lifetime Warranty, protecting your investment. From the team at SENTRY, thank you for your support and confidence. TABLE OF CONTENTS MAGAZINES . .4-7 ON GUN ACCESSORIES . 8-9 PLATE CARRIER AND ACCESSORIES . 10-13 BELTS AND POUCHES . 14-21 SLINGS. .22-23 OPTIC COVERS. .24-29 FIREARM COVERS . .30-33 CLEANING AND LUBRICATION. .34-39 BAGS. .40-41 OEM PROGRAMS. .42-43 3 When every round counts™ 4 ™ POLYHEX2 The proprietary advanced composite that all Hexmag magazines are made from delivers superior strength and reliable performance across the modern sporting rifle and pistol spectrum.
    [Show full text]
  • OPMODTM Introduces the L-3 Eotech Limited Edition OPMOD
    FOR IMMEDIATE RELEASE OPMODTM introduces the L-3 EOTech Limited Edition OPMOD™ EXPS2 Holographic Weapon Sight available exclusively at OpticsPlanet OpticsPlanet Releases Latest Product from their OPMODTM division of exclusive and innovatively designed optics products. Northbrook, Illinois – June 29, 2010 – OpticsPlanet Inc. (www.opticsplanet.com), the largest specialized retailer of sport optics, tactical and military gear, binoculars, rifle scopes, and sunglasses, announced the release of the L-3 EOTech Limited Edition OPMOD™ EXPS2 Holographic Weapon Sight. The new sight is available exclusively at OpticsPlanet.com and Tactical-Store.com. Through a collaborative effort, OpticsPlanet, Inc.’s OPMOD™ team and L-3 EOTech’s premier engineering and marketing teams pinpointed the exact product innovations end- users were looking for in a holographic weapon sight. Based on the original award winning L-3 EOTech XPS2 Holographic Weapon Sight, the L-3 EOTech OPMOD™ Limited Edition EXPS2 Holographic Red Dot Sight offers a unique combination of features not available on any other EOTech model. Features available exclusively on the OPMOD™ sight include a 7mm raised base to allow lower 1/3 co-witness, easily accessible side buttons, and a single quick detach throw lever. The sight is available with two different reticle options; the EXPS2-0 features a reticle pattern with 65 MOA ring and 1MOA dot and the EXPS2-2 features a reticle pattern with 65 MOA ring and two 1MOA dots. About OPMOD™: OPMOD™, a division of Optics Planet, Inc., in conjunction with the top engineering and marketing teams in the industry aims to provide revolutionary new products tailored to the highest performance standards required by our armed forces and shooting enthusiasts.
    [Show full text]
  • “Building Decades of Experience Into America's Rifle”
    © 2017 Windham Weaponry, Inc. “Building Decades of Experience into America’s Rifle” Catalog 2017 v.1 Windham Weaponry – Protecting Your Firearm Investment Backing up our commitment to producing the finest rifles possible, every Windham Weaponry rifle includes our Transferable Limited Lifetime Warranty - the best in the business! TRANSFERABLE LIMITED LIFETIME WARRANTY* Windham Weaponry, Inc. (WWI) will warranty all firearms manufactured by WWI against any and all manufacturer’s defects in material and workmanship which affect reasonable operation for the lifetime of the firearm to the purchaser. This warranty is transferable from the original purchaser to a subsequent buyer. Warranty is established by registering online at: http://www.windhamweaponry.com or by phone with our Customer Service Department at 855-808-1888. Warranty claims may be made by contacting Customer Service, either in writing or by phone for a Return Authorization number prior to delivering the unloaded firearm to Windham Weaponry, Inc., 999 Roosevelt Trail, Windham, Maine 04062, freight prepaid by the purchaser. Firearms and ammunition must be shipped separately. No COD shipments will be accepted. WWI will repair or replace only those parts determined to be defective by the factory. This warranty does not apply to normal wear and tear of any parts or protective finishes. The following are specifically excluded from coverage under this warranty and will cause said warranty to become null and void: Damage or malfunction resulting from accident, negligence, misuse or unauthorized
    [Show full text]