AIMPOINT Item AIMPOINT OPTICS & ACCESSORIES INDEX PATROL RIFLE OPTIC Micro T-2 RED DOT SIGHT Red Dot Sights ..................270-275 Scope Accessories ...............275-276 Rugged, Reliable & Versatile - Enhanced, Night Vision Compatible Always Ready Edition Of This Popular Red Dot The Micro T-2 is a redesigned, Parallax-free, non-magnifying red upgraded evolution of the original BURRIS dot sight is ready at all times, with no T-1 that adds compatibility with all switches or levers to fumble with. Sim- generations of night vision devices RED DOT REFLEX SIGHTS after 8 hours help keep you from running out of power at the wrong ply install the supplied battery, turn the (NVD). The T-2 retains the original’s time. Windage and elevation adjustments can be made quickly PRO on, and forget about it – for up ruggedness and reliability, while add- Fast, Precise Heads-Up Sighting; with a coin - no special tool needed - with a 3° (190" at 100 yards) to 3 years! 2 MOA center-dot, with 6 ing a unique coating on the front lens Ultra-Robust Design Handles adjustment range. Available with 3 or 8 MOA dot, with or without daylight and 4 night vision brightness that reflects the 2 MOA dot’s red light Magnum-Power Recoil quick-attach/detach Picatinny mount. settings, enables accurate target en- at nearly 100% efficiency to give the highest possible dot clarity SPECS: Aluminum, stainless steel, and bronze, matte black finish. 1.9" gagement under a broad variety of conditions. Includes a detach- and brightness. This provides a remarkably clear image when used OPTICS & ACCESSORIES FASTFIRE II - Provides fast, both-eyes- (48.2mm) long x 1" (25.4mm) wide x 1" high. .9 oz. (25g) wt. Runs on one able spacer that allows co-witnessing with the standard iron sights with a 3rd generation NVD and when used with an Aimpoint 3XMag open sighting on handguns, rifles, and CR-1632 Lithium battery. Includes battery, protective cover, mounting on AR-15/M16/M4 weapons. Or remove the spacer to install the magnifier. With 4 NVD-compatible brightness settings and 8 day- shotguns. Stainless steel and aluminum screws, wrench, and instructions. FastFire III is not compatible with the PRO on shotguns or submachine guns. Integrated “rail-grabber” light settings, including one extra-bright setting, the T-2 is ideal for housing handles the recoil of magnum AR-F3 FastFire Mount or the Picatinny Protector Mount. mount with knurled, oversized knob aids in quick attach/detach on ’round the clock operation hunters, sport shooters, military, and shotgun loads; installed weight under 2 #118-000-054AT 3 MOA FastFire III, Sight Only, ​ Picatinny rails. Compatible with all generations of night vision de- law enforcement. Robust extruded aluminum housing, matte black oz. allows mounting on semi-auto pistol slides. Gives a panoramic 8A239L00 � � � � � � � � � � � � � � � � � � � � � � � � $ 239.00 vices; may also be used with Aimpoint 3x Magnifier and Concealed anodized, with a mechanical control switch for added reliability. field of view and unlimited eye relief for an unobstructed view of Engagement Unit. Flip-up lens caps included. Runs on one CR-2032 lithium battery. 50,000-hour continuous- #118-000-052AT 3 MOA FastFire III, w/Picatinny 1 SPECS: Hard-anodized aluminum, black. 5 /4" (13.3cm) OAL. 3" (7.6cm) the area around the target. A high-intensity LED projects a 4 MOA Mount, 8A249I00 � � � � � � � � � � � � � � � � � 249.00 use battery life; 500,000 hours at NVD settings. The T-2 is available red sighting dot, while a light sensor and integrated control cir- high, including spacer. 13 oz. (368.g) wt. 1x magnification. 30mm tube alone, with an integral mount for installation on any rifle, shotgun, #118-000-055AT 8 MOA FastFire III, Sight Only, ​ dia. Unlimited eye relief. 2 MOA dot. Battery life: 30,000 hrs. Waterproof cuitry adjust the dot’s brightness. Coated lens resists scratches and 8A239P00 � � � � � � � � � � � � � � � � � � � � � � � � 239.00 or handgun with a Picatinny accessory rail, or with a quick-release scuffs and is parallax-free to 50 yards. 1.07x magnification aids to 150′ (45m) depth. One DL1/3N lithium battery, included. LRP Mount that is the correct height for co-witnessing with AR-15 in acquiring long-range targets, without compromising close-in #118-000-053AT 8 MOA FastFire III, w/Picatinny #100-009-902AT Aimpoint Patrol Rifle Optic, factory "iron" sights. Mount, 8A249I00 � � � � � � � � � � � � � � � � � 249.00 effectiveness. Set the point-of-impact with two flush-mounted 7A425G58 � � � � � � � � � � � � � � � � � � � � � � � � $ 437.00 #100-016-034AT Micro T-2 Sight w/Mount, screws that provide 3° (190" at 100 yards) windage and elevation AR-F3 FLATTOP FASTFIRE SIGHT - Fea- 7A675I84 � � � � � � � � � � � � � � � � � � � � � � � � � $ 776.00 adjustments using the included scale disc and adjustment tool. tures a Burris FastFire III 3-MOA dot optic, 100-018-346AT Micro T-2 Sight w/LRP Mount, Control switch on the left side resists accidental activation. Pow- enclosed in a specially designed mount that 7A809I17 � � � � � � � � � � � � � � � � � � � � � � � � � 874.00 ered by one 3-volt CR-2032 lithium battery, included; up to 5-year allows the unit to be attached to flattop up- battery life when used in Battery Saver mode. Gasket bottom plate AIMPOINT #100-018-550AT Micro T-2 Sight Only, No Mount, per receivers. Rugged aluminum mount po- 7A695K83 � � � � � � � � � � � � � � � � � � � � � � � � 751.00 seals unit 100% against water. Available with a mount that fits MIL- sitions the optic to co-witness iron sights on STD 1913 Picatinny rails. For other installations, sight and mounts Micro H-2 RED DOT SIGHT RED DOT SIGHTS RED DOT AR-style rifles. Attaches easily to Picatinny are available separately. ab A Compact Optic Built To Work Hard - 3 rails. SPECS: Sight - Steel, aluminum, optic-grade glass. 1 /4" (4.5cm) long, 1" And Keep Working (2.5cm) wide, 1" high. Includes snap-on cover, CR-2032 lithium battery, #118-000-067AT AR-F3 Flattop FastFire Sight, windage/elevation scale disc and adjustment tool. Mounts - Aluminum, 8A299Q00 � � � � � � � � � � � � � � � � � � � � � � � $ 299.00 Designed using feedback from Aimpoint AIMPOINT Magnifiers matte black. Mounting screws included. SHOTGUN SPEEDBEAD™ - Combines the proven customers who wanted a truly "hard core" #118-000-020AS FastFire II, only, 8A199M00 � � � � � � � � $ 199.00 compact red dot sight, the Micro H-2 has a Turns Red Dot Into Burris FastFire II red dot reflex sight with a steel Magnified Optic #118-000-019AS FastFire II, w/Picatinny Mount, mounting plate that installs easily between your reinforced aluminum housing and integral flip-up covers to protect the lenses so it'll 8A209A00 � � � � � � � � � � � � � � � � � � � � � � � � 209.00 shotgun’s stock and receiver to center the optic Aimpoint Magnifiers are de- directly in line with the rib. Provides approximately stand up to all types of environmental con- #118-000-013AS 1911 Standard FastFire Mount, ditions. Cutting-edge optics and lens coat- signed to mount behind Aimpoint 8A47A99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 4" of eye relief. In case of battery failure, simply look red dot sights and add magnification through the optic and use your front bead. ing deliver superior clarity of both the target #118-000-014AS 1911 Novak FastFire Mount, and the reticle dot itself, leading to faster to help with long-range aiming or SPECS: Steel, aluminum, optic-grade glass, plastic spac- observation. Won't cause zero shifts 8A47L99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 3 target acquisition and heightened shooter 6X-1 "Professional" ers, steel setscrews. 1 /4" (4.5cm) long, 1" (2.5cm) wide, 1" when mounted, or when used in a #118-000-015AS 1911 Bo-Mar/Kimber FastFire Mount, confidence. Of course, it's parallax-free, with high. Includes snap-on cover, CR-2032 lithium battery, flip mount. Professional models have 8A47G99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 unlimited eye relief, and 12 reticle brightness windage/elevation scale disc, adjustment tool and instructions. fully-armored bodies to protect against #118-000-011AS Glock FastFire Mount, 8A47J99 � � � � 47.99 settings you can adjust it to meet almost any #118-000-024AT SpeedBead, Rem 870, 8A249Q00 � � $ 249.00 lighting condition. Machined ramps on the impact, shock and the rigors of military or #118-000-012AS Springfield XD FastFire Mount, #118-000-025AT SpeedBead, Rem 1100/11-87, police operations, and have -3 to +3 di- 8A47Q99 � � � � � � � � � � � � � � � � � � � � � � � � � 47.99 body provide snag-proof protection for the 8A249C00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00 windage and elevation turrets. Compatible optric adjustments to allow crystal-clear focus for any shooter's eye. Commercial #118-000-073AS S&W M&P FastFire Mount, 8A47G99 � � 47.99 #118-000-022AT SpeedBead, Benelli SBE II, with both Weaver and Picatinny rails or it can be piggy-backed on model delivers the same level of optical 8A249A00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00 to a larger optic. Fully waterproof to withstand whatever Mother 3X-C "Commercial" PICATINNY PROTECTOR MOUNT - Light- Nature dishes out. clarity with -2 to +2 dioptric adjustments, weight mount with raised “wings” protects your #118-000-023AT SpeedBead, Benelli M2, but at a more economical price. Available in fixed 3x or 6x powers. 3x 8A249J00 � � � � � � � � � � � � � � � � � � � � � � � � 249.00 SPECS: Aluminum body, matte black. 1x magnification. 2.6" (6.6cm) long, FastFire