DMP-BDT110_210_VQT3B58_eng.book 1 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Owner’s Manual Blu-ray DiscTM Player Model No. DMP-BDT310 DMP-BDT215 DMP-BDT210 DMP-BDT110

The illustration shows the image of DMP-BDT310.

Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.

If you have any questions contact U.S.A. and Puerto Rico : 1-800-211-PANA(7262) Canada : 1-800-561-5505

P PC PX VQT3B58-2 DMP-BDT110_210_VQT3B58_eng.book 2 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Getting started

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. CANADA. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. CAUTION 4 Follow all instructions. 5 Do not use this apparatus near water. RISK OF ELECTRIC SHOCK 6 Clean only with dry cloth. DO NOT OPEN 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. CAUTION : TO REDUCE THE RISK OF ELECTRIC 8 Do not install near any heat sources such as radiators, heat registers, SHOCK, DO NOT REMOVE SCREWS. stoves, or other apparatus (including amplifiers) that produce heat. NO USER-SERVICEABLE PARTS 9 Do not defeat the safety purpose of the polarized or grounding-type INSIDE. plug. A polarized plug has two blades with one wider than the other. A REFER SERVICING TO QUALIFIED grounding-type plug has two blades and a third grounding prong. The SERVICE PERSONNEL. wide blade or the third prong are provided for your safety. If the The lightning flash with arrowhead symbol, within an provided plug does not fit into your outlet, consult an electrician for equilateral triangle, is intended to alert the user to the replacement of the obsolete outlet. presence of uninsulated “dangerous voltage” within 10 Protect the power cord from being walked on or pinched particularly at plugs, the product’s enclosure that may be of sufficient convenience receptacles, and the point where they exit from the apparatus. magnitude to constitute a risk of electric shock to persons. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table The exclamation point within an equilateral triangle is specified by the manufacturer, or sold with the apparatus. intended to alert the user to the presence of important When a cart is used, use caution when moving the cart/ operating and maintenance (servicing) instructions in apparatus combination to avoid injury from tip-over. the literature accompanying the appliance. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. [For_units_with_PX_printed_on_the_outer_packaging] Servicing is required when the apparatus has been damaged in any way, THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These WARNING limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, Unit uses, and can radiate radio frequency energy and, if not installed and To reduce the risk of fire, electric shock or product damage, used in accordance with the instructions, may cause harmful – Do not expose this unit to rain, moisture, dripping or splashing. interference to radio communications. However, there is no guarantee – Do not place objects filled with liquids, such as vases, on this unit. that interference will not occur in a particular installation. If this – Use only the recommended accessories. equipment does cause harmful interference to radio or television – Do not remove covers. reception, which can be determined by turning the equipment off and – Do not repair this unit by yourself. Refer servicing to qualified service personnel. on, the user is encouraged to try to correct the interference by one or more of the following measures: ≥ Reorient or relocate the receiving antenna. CAUTION ≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from that to Unit which the receiver is connected. – This unit utilizes a laser. Use of controls or adjustments or performance ≥ Consult the dealer or an experienced radio/TV technician for help. of procedures other than those specified herein may result in FCC Caution: To assure continued compliance, follow the attached hazardous radiation exposure. installation instructions and use only shielded interface cables when – Do not place sources of naked flames, such as lighted candles, on this unit. connecting to peripheral devices. Placement Any changes or modifications not expressly approved by the party To reduce the risk of fire, electric shock or product damage, responsible for compliance could void the user’s authority to operate – Do not install or place this unit in a bookcase, built-in cabinet or in this equipment. another confined space. Ensure this unit is well ventilated. This device complies with Part 15 of the FCC Rules. Operation is – Do not obstruct this unit’s ventilation openings with newspapers, subject to the following two conditions: (1) This device may not cause tablecloths, curtains, and similar items. harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-PANA (7262)

(Inside of product)

2 VQT3B58 Table contents of DMP-BDT110_210_VQT3B58_eng.book 3 ページ ２０１１年５月１７日 火曜日 午後４時４３分 3 ページ DMP-BDT110_210_VQT3B58_eng.book lybedssCrsUBdvcs 6 . Playable discs/Cards/USB devices. 5 . . . Control reference guide 4 . . . Unit and media care 4 .Accessories. . . . . 2 . . . . . INSTRUCTIONS SAFETY IMPORTANT (VIERA Link (VIERA CAST VIERA Enjoying 22 . . . . Playing music 21 . . . stillpictures Playing 20 . . . . Enjoying 3D video 17 . . . Playing video contents 16 . . . . . HOME menu 16 . . . Inserting or removing media 12 STEP . 5:Settings . . . STEP 4:Connecting to an powerAC STEP 3:Connecting to abroadband STEP 2:Connecting to an amplifier/ 8 . STEP . 1:Connecting to aTV Linked operations with the TV 24 . . . . . equipment Playing contents savedon other Connections & Settings & Connections ore...... 12 . . . . source 10 . . network . . 9 . . . . receiver TM Getting started Getting “HDAVIControl Playback TM 23 . . . TM ”) 26 . . Referencia rápida en español 42 . . . . (Only for CANADA) Limited Warranty 41 . . . . AND PUERTO RICO) FOR U.S.A. (ONLY Warranty Limited 39 . . . . . Specifications. 38 . . . Supplemental information 37 . . Messages. . . . 34 Troubleshooting . guide . . . . . Setup . . menu .29 27 Playback . menu. . . . . ne ...... Back cover . . . . Index [Para EE.UU. yCanadá] Reference) Quick (Spanish About Firmware updates ( updates Firmware About ≥ ≥ Manual Owner’s this in descriptions About [BDT310] inthis Owner’s Manual are of DMP-BDT310. DMP-BDT110. Unless otherwise indicated, illustrations and DMP-BDT210 DMP-BDT215, DMP-BDT310, models to applicable is Manual Owner’s This control. remote the using described generally are operations for Instructions DMP-BDT210 and DMP-BDT110, respectively. DMP-BDT110, and DMP-BDT210 DMP-BDT215, DMP-BDT310, to applicable

[BDT215]

Reference [BDT210] Settings 43 . . . . .

[BDT110] : indicates features features : indicates 15) VQT3B58 3

Reference Settings Playback Connections & Settings Getting started DMP-BDT110_210_VQT3B58_eng.book 4 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Accessories Unit and media care Check the supplied accessories before using this unit. ∫ Clean this unit with a soft, dry cloth 1 Remote control ≥ Never use alcohol, paint thinner or benzine to clean this (N2QAYB000574) unit. 2 Batteries for remote control ≥ Before using chemically treated cloth, carefully read the 1 AC power supply cord instructions that came with the cloth. [For_U.S.A._and_Canada] (K2CB2CB00022) [For_units_with_PX_printed_on_the_outer_packaging] ∫ Clean the lens (K2CQ2CA00007) ≥ Use the lens cleaner (not supplied) to clean the unit’s lens. 1 [For_units_with_PX_printed_on_the_outer_packaging] AC plug adaptor (K2DAYYY00002) ∫ Clean discs 1 [BDT215] HDMI cable (K1HY19YY0012) DO DO NOT

[For_Canada] The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit. Wipe with a damp cloth and then wipe dry.

≥ Product numbers provided in this Owner’s Manual correct as of ∫ Disc and card handling precautions December 2010. These may be subject to change. ≥ Handle discs by the edges to avoid inadvertent scratches ≥ Do not use AC power supply cord with other equipment. ≥ [For_U.S.A._and_Puerto_Rico] : To order accessories, refer to or fingerprints on the disc. “Accessory Purchases (United States and Puerto Rico)” on page 41. ≥ Do not attach labels or stickers to discs. [For_other_areas] : To order accessories, call the dealer from whom ≥ Do not use record cleaning sprays, benzine, thinner, static you have made your purchase. electricity prevention liquids or any other solvent. ≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card. ≥ Do not use the following discs: Using the remote control – Discs with exposed adhesive from removed stickers or labels (rented discs etc). Insert so the poles (i and j) match those in the remote – Discs that are badly warped or cracked. control. – Irregularly shaped discs, such as heart shapes.  ∫ To dispose or transfer this unit  The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory R6/LR6, AA presets to delete the user settings. ( 34, “To return all (Alkaline or settings to the factory preset.”) manganese batteries) ≥ The operation history may be recorded in the memory of this unit. Point it at remote control signal sensor on this unit. ( 5)

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. ≥ Do not mix old and new batteries or different types at the same time. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. ≥ Do not take apart or short circuit. ≥ Do not attempt to recharge alkaline or manganese batteries. ≥ Do not use batteries if the covering has been peeled off. Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

CAUTION ≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥ When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

4 VQT3B58 5 4USB3SD2Disc port card tray( slot ( ( 1 6CALL LED Control reference guide reference Control DMP-BDT110_210_VQT3B58_eng.book 5 ページ ２０１１年５月１７日 火曜日 午後４時４３分 5 ページ DMP-BDT110_210_VQT3B58_eng.book [BDT310] power. of amount small versa. In standby mode,the unit isstill consuming a vice or mode standby to on from unit the switch to Press POWER button ( button POWER call etc. of the video communication. incoming receives unit this when up light will LED The ( on/off. turn to LED the set to possible is It 1 6 5 4 3 2 1 8 7 : V.OFF LED (Video off LED)

( 16) 16) 23) 16) POWER 2 Í/I ) ( 12) SD CARD 3 12 15 17 20 19 18 16 14 13 12 11 10 9 31) 4 ヤモロロ 5 6 7 19 Selection/OK, Frame-by-frame ( Frame-by-frame Selection/OK, 19 ( menu HOME Show 18 ( CAST VIERA the of screen Home the Displays 17 screen menu the Exit 16 screen NETFLIX Show 15 ( audio Select 14 ( effects 3D Setup 13 0Return to previous screen 20 ( communication a video up Start 12 1Show Playback menu ( 11 12 0Open or close the disc tray ( 10 Transmitthe remote control signal 9 1Open or close the disc tray ( 11 ( play Start 10 9Stop Display 8 Remote control signal sensor ( 7 2 TV operation buttons operation TV 2 Turnthe unit on and off 1 Rear panelterminals ( These buttons are used when; ( menu sub 8 Show 7 4 Basic playback control buttons ( buttons control playback Basic 4 Select title numbers, etc./Enter numbers orcharacters 3 Show Pop-up menu/Top menu/Direct Navigator ( ( messages status Show 6 5 cause malfunction. may this and opened, is it when objects with collide may tray disc The unit. the of front in objects place not Do CAUTION [BDT310] Angle: Approx. 20 Approx. Angle: feet) m (23 7 approx. Within Distance: [AV] [ may not work.) buttons these TV the on (Depending control. remote You can operatethe Panasonic TV through theunit’s ≥ activated. is SENSOR TOUCH-FREE up when willLED light The ≥ [ [CANCEL] :Cancel [CANCEL] ( Í ijVOL] 8 Operating contents of VIERA CAST.( (BD-J). applications Operating aBD-Video discthat includes Java TV POWER] : Turn the television on and off and on television Turn the : POWER] TV 23)

:

Switch the inputselect

17) [BDT215] 9

:

10 17) Adjust the volume the Adjust 17)

[BDT210] up and down, 30 down, and e up 18) 20) –0 12) 8–10, 11 16) : 27)

17) Touch Free Sensor ( 16) 16) the front panel. front the down flip to Pull 17) 17) 23) e left and right 23) VQT3B58 TM

23) 33) 17) 5

Getting started DMP-BDT110_210_VQT3B58_eng.book 6 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Playable discs/Cards/USB devices Playable contents Type Logo examples Type detail ( 39) BD-Video Video Video BD-RE JPEG/ BD MPO (3D still picture) Video BD-R DivX® [BDT310/210_for_Canada] MKV

DVD-Video Video

Video DVD-R AVCHD DivX® [BDT310/210_for_Canada] MKV DVD MP3 DVD-R DL JPEG/ MPO (3D still picture)

DVD-RW Video AVCHD — +R/+RW/+R DL

Music CD Music [CD-DA]

DivX® [BDT310/210_for_Canada] CD MKV CD-R Music [CD-DA] — CD-RW MP3 JPEG/ MPO (3D still picture) SD Memory Card (from 8 MB to 2 GB) MPEG2 SD SDHC Memory Card (from 4 GB to 32 GB) AVCHD SDXC Memory Card (48 GB, 64 GB) JPEG/ (Compatible with both mini and micro types) MPO (3D still picture)

DivX® [BDT310/210_for_Canada] MKV USB devices USB — MP3 (up to 2 TB) JPEG/ MPO (3D still picture)

6 VQT3B58 region number number region This unit plays DVD-Video marked with labels containing the DVD-Video Example: ≥ ≥ ∫ ≥ ∫ instructions. recorder’s the to refer Please unit. this on play bya recorder, etc. needs to finalized be recorded and by DL CD-R/RW the recorder to +R/+RW/+R DL, DVD-R/RW/R ∫ Example: code region This unit plays BD-Videomarked with labels containing the BD-Video ∫ ≥ ≥ ≥ ≥ ≥ ≥ ≥ previously described. or supported specifically not is that disc other Any ∫ ≥ ≥ ≥ DMP-BDT110_210_VQT3B58_eng.book 7 ページ ２０１１年５月１７日 火曜日 午後４時４３分 7 ページ DMP-BDT110_210_VQT3B58_eng.book 2D video can be enjoyed as 3D virtually. ( virtually. 3D as enjoyed be can video 2D Cable. HDMI Speed High a using TV compatible 3D a to connected is unit this 3Dvideos and 3D still pictures can be played back when – DTS-HD Master Audio) adopted in BD-Video. Dolby TrueHD, DTS-HD High ResolutionAudio and Plus, Digital (Dolby audio rate bit high supports unit This [BDT310/210_for_other_than_Canada] WMA discs VideoCD and Super Video CD DVD-Audio CD Photo CD Audio Super DVD-RAM BD-Video discs recorded atrate a offields/sec 50 HD DVD PAL discs [BDT310/210_for_Canada] All types of DivXdiscs 3D BD-Video Finalize Region management information unit Discs thatcannot be played inthis 5.1ch PCM. “PCM”, the maximum possiblenumber Dolby of soundis [BDT110] 1 : If “Dolby D/Dolby D +/Dolby TrueHD” is set to TrueHD”to D +/Dolby is set D/Dolby “Dolby : If “A” “1”

ALL . ( or 30) “ALL” : DivX Plus HDdiscsPlus : DivX 1 . 2 4

[BDT215]

[BDT110] 20) : ≥ ≥ ≥ ≥ ≥ ≥ ∫ ≥ ≥ ∫ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ∫ ≥ capacity. Useable memory may be slightly less than the card being formatted etc. devices, recorded contents may be erased due tothe card or computers incompatible with used is card SD If the exFAT. in Cards Memory SDXC and name.) file long support FAT32 in Cards Memory as SDHCnot (Does format FAT12 as well FAT16 and formats, Specifications SD Card meet that Cards Memory SD with compatible is unit This “LOCK”. to SD card) the (on tab To protect the card’s contents, move the record prevention children to prevent swallowing. Keepthe MemoryCard outof reach of or otherwise customer provided. cards, such with supplied usually are These card. adaptor an with used be must but Cardsand microSDXCCards can be used, microSDHC Cards, microSD miniSD Cards, possible. be not may playback so format (CD-DA) Audio the technical specifications of theCompact Disc Digital The digitalaudio content side of aDualDisc does not meet guaranteed. CD-DA specifications (copy control CDs,etc.) cannot to be conform not do that CDs of quality sound and Operation This unit supports USB 2.0 High Speed. High 2.0 USB supports unit This supported. are FAT12, systems FAT16 FAT32 and file Read the disc’s instructions carefully. Manual. Owner’s this in described as play control to be able always not The discs can disc of producers may so areplayed, how control the you how the files were created. and method recording the recording, the of condition the media, of type It notmay be topossible play the above media in some cases due to the ( unit. this of terminal Wireless LANAdaptor DY-WL10, connect it to the rear When usingCommunication Camera TY-CC10Wor charging. device USB support not does unit This devices. Thisunit does notguarantee connection with all USB supplied. Supply power from an external source. be not HDDmay the to the power is not recognized This unit supports an HDDformatted in FAT32. If the HDD (Use of USB 2.0 devicesis recommended.) due to differing connector shape, larger current ratings,etc. current larger shape, connector differing to due be used cannot devices 3.0 USB cases certain in devices, 2.0 USB as devices 3.0 USB use can unit this Although SD card CD Music USB deviceUSB 0 23) 10, VQT3B58 7

Getting started DMP-BDT110_210_VQT3B58_eng.book 8 ページ ２０１１年５月１７日 火曜日 午後４時４３分

STEP 1 : Connecting to a TV

≥ Do not place the unit on amplifiers/receivers or equipment ≥ Please use High Speed HDMI Cables that have the HDMI that may become hot. The heat can damage the unit. logo (as shown on the back cover). It is recommended that ≥ Before making any connections we suggest you you use Panasonic’s HDMI cable. When outputting 1080p temporarily disconnect all the units from AC power. signal, please use HDMI cables 5.0 meters (16.4 ft.) or ≥ Do not connect video signals through a video recorder. less. Due to copy guard protection the picture may not be Recommended part number (High Speed HDMI Cable): displayed properly. RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.

[BDT310] 10BASE-T/100BASE-TX

RL COMMUNICATION AUDIO OUT VIDEO OUT CAMERA LAN AV OUT MAIN AV OUT SUB

[BDT215] 10BASE-T/100BASE-TX [BDT210]

COMMUNICATION CAMERA LAN

[BDT110] COMMUNICATION 10BASE-T/100BASE-TX CAMERA

WIRELESS LAN ADAPTOR LAN Back of the unit

∫ Via an HDMI AV OUT terminal (High quality) ∫ Via a VIDEO OUT terminal (Standard quality) – [BDT310] : Use HDMI AV OUT MAIN terminal. – It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.

HDMI IN

Audio/Video cable

HDMI cable (Only supplied with DMP-BDT215)

10BASE-T/100BASE-TX

RL COMMUNICATION COMMUNICATION AUDIO OUT VIDEO OUT CAMERA CAMERA LAN AV OUT MAIN AV OUT SUB

≥ Set “HDMI Audio Output” to “On” ( 32). ≥ Connect terminals of the same color. ≥ The HDMI connection supports VIERA Link “HDAVI Control” ( 26).

8 VQT3B58 ≥ ≥ ≥ ≥ ≥ ∫ amplifier/receiver an to Connecting 2: STEP DMP-BDT110_210_VQT3B58_eng.book 9 ページ ２０１１年５月１７日 火曜日 午後４時４３分 9 ページ DMP-BDT110_210_VQT3B58_eng.book DMP-BDT215) with supplied (Only HDMI cable Set “HDMI AudioOutput” to “On” ( TVusing anoptical digital cable. to connectthe amplifier/receiver and by amplifier/receiver it is also required terminal, in order to enjoy TV’s sound HDMI the on (non-ARC-compatible) “(ARC)” of indication the have not does that receiver When using theTV or amplifier/ audio the that however, note, Please – respective connections. receiver, using HDMI cablesfor the amplifier/ the and TV the connect then AV HDMI to a TVvia unit OUT, this connect amplifier/receiver, compatible When connecting to anon-3D “HDAVILink ( Control” VIERA supports connection HDMI The ( amplifier/receiver connected the on Set “Digital Audio Output” depending speakers channel Multi – It is possible to play back 3D 3D back play to possible is It – – can onlybe up to 5.1ch. Via an HDMI AV OUT terminal AV OUT HDMI an Via ON 30). receiver are 3D compatible. 3D are receiver amplifier/ and TV connected the videos and 3D still pictures when terminal. MAIN [BDT310] 10BASE-T/100BASE-TX LAN Amplifier/receiver : Use HDMI AV Use : OUT VOT MI AVOUTS AV OUTMAIN HDMI OUT HDMI IN HDMI IN (ARC) (ARC) HDMI IN 26). HDMI cable 32). ∫ ≥ ≥ ≥ “HDAVI Control”. Link VIERA the with compatible not AV HDMI The is terminal SUB OUT “HDAVI Control” ( OUT MAIN supportsVIERA Link TheHDMI connection using HDMIAV Audio is output in high resolution– “V.OFF”. ( to Mode” Output “HDMI(SUB) Set ( “On” to Output” Audio “HDMI Set You can enjoy richer sound by using– [BDT310] – It is possible to play back 3D 3D back play to possible is It – amplifier/receiver with 3D. with amplifier/receiver regardless of compatibility of the terminal 00BASE-TX N 32). the HDMI AV OUT SUB terminal. receiver is not 3D 3D compatible. is not receiver compatible, evenif the amplifier/ 3D is TV connected the videos and 3D stillpictures speakers Multi channel HDMI cable : HDMI AV HDMI : OUT SUB VOT MI AVOUTSUB AV OUTMAIN HDMI IN 20) Amplifier/receiver HDMI cable 26). HDMI IN

when ≥ ≥ ∫ When connectinga TV ( amplifier/receiver ( on the used terminal and connected depending Output” Audio “Digital Set ( “Off” to Output” Audio “HDMI set terminal, AVOUT HDMI ANAVOUTSUB T MAIN ViaOPTICAL terminal an Amplifier/receiver OPTICAL IN 30). Optical cable 32). VQT3B58 8) with 9

Connections & Settings DMP-BDT110_210_VQT3B58_eng.book 10 ページ ２０１１年５月１７日 火曜日 午後４時４３分

STEP 3 : Connecting to a broadband network

The following services can be used when this unit is For details about connection method, refer to the connected to broadband. instructions supplied with the connected equipment. ≥ Firmware can be updated ( 15) ≥ You can enjoy BD-Live ( 19) ≥ You can enjoy VIERA CAST ( 23) ≥ You can access other devices (Home Network) ( 24) ∫ LAN cable connection ∫ Wireless LAN connection – [BDT310] [BDT215] [BDT210] : Wireless LAN is built in. (There is no need to connect a Wireless LAN Adaptor.) – [BDT110] : Connect the Wireless LAN Adaptor DY-WL10 (optional).

[BDT110] COMMUNICATION 10BASE-T/100BASE-TX 10BASE-T/100BASE-TX CAMERA

WIRELESS LAN COMMUNICATIONCOMMUNICATION ADAPTOR LAN DEO OUT CAMERACAMERA LAN AV OUT MAIN AV OUT SU

Wireless LAN Adaptor LAN Cable

Broadband router, etc. Wireless router, etc.

LAN Cable LAN Cable

Modem Modem (Broadband) (Broadband) *Provided by ISP *Provided by ISP

≥ Use category 5 or above straight LAN cables (STP) when ≥ For up to date compatibility information on your Wireless connecting to peripheral devices. router refer to ≥ Inserting any cable other than a LAN cable in the LAN http://panasonic.jp/support/global/cs/ terminal can damage the unit. (This site is in English only.) For additional information about this unit refer to http://www.panasonic.com/consumer/support (For U.S.A.) ≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc. ≥ [BDT110] – Only the Wireless LAN Adaptor DY-WL10 (optional) can be used. – Read the operating instructions for the Wireless LAN Adaptor DY-WL10 (optional) thoroughly when using it. – To simultaneously connect the Wireless LAN Adaptor DY-WL10 (optional) and a LAN cable, use the extension cable supplied with the DY-WL10.

10 VQT3B58 ≥ ≥ ofdisuse devices. these afailure arise may limits, these todue to obey of condition orto use any or willPanasonic in be no way forresponsible any incidental damage which devices.these using before limits You adaptor. these LAN of Wireless be aware must The limitsfollowing are in place regarding usage ofthe this unit or connection LAN Wireless of Precautions DMP-BDT110_210_VQT3B58_eng.book 11 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 11 DMP-BDT110_210_VQT3B58_eng.book – Do Do not or alterdisassemble the device in any way. – devices Keepthese away moisture.from – Do or not bend, subject devicesthese to impacts. strong – sunlight. direct or high temperatures to devices these expose not Do – points: following the follow intended and itin which was manner inthe devices these Please use components. This intercepted and monitored. be waves may radio over received and Data transmitted

unit or LANWireless adaptor

contain delicate electronic electronic delicate contain [BDT310] FCC Note: FCC THE FOLLOWING APPLIES ONLYIN THE U.S.A. and ankles). feet wrists, hands, extremities: (excluding body person’s from away or more 20cm least at radiator the keeping operated and installed be should it that desirable is it But (MPE). evaluation exposure of energyRF it that deemed to comply without permissive maximum (RF) radio frequency levels has equipment This rules. Exposure low very IC the of and RSS-102 OET65 to C Supplement in Guidelines Exposure frequency (RF) FCCmeets radio theenvironment and anuncontrolled for complies equipment This with radiationFCC/IC limits exposure forth set product. this damage and/or with interference cause can radar stations These users primary the 5.25of to 5.35 GHz and 5.65 to 5.85 bands. GHz as are allocated radars power High systems. Satellite Mobile co-channel 5.25range 5.15 GHz to reduce the to for potential interference harmful to frequency the for indoors used be to product this require IC and FCC range. frequency GHz 5.25 to 5.15 in the operation its due to use indoor to restricted is product This or transmitter. antenna other any transmitterThis must not be co-located or in operated conjunction with rear of the on displayed is module built-in of number certification The – or 772C-LBUN 772C-LBSJ IC: Contains VPY-LBSJ ID: FCC or VPY-LBUNContains device. this of operation any including interference, accept interference may that undesired cause (1) This not may device cause and(2) interference, device this must Operation tois thesubject following conditions: two Rules. IC of RSS-Gen and Rules FCC of 15 Part with complies device This THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA This Class B digital apparatus complies with Canadian ICES-003. Canadian with complies apparatus B digital Class This ONLY APPLIES FOLLOWING THE IN CANADA. Telephone 1-800-211-PANANo.: (7262) Consumer Panasonic Company Electronics Contact: Support 07094 NJ Secaucus, WayOne Panasonic of Corporation Panasonic North America Party: Responsible operation. undesired cause may that interference including received, interference any accept must device this (2) (1) This not may device cause and interference, harmful conditions: two following the to is Rules. the Part with subject Operation FCC 15of complies device This equipment. this operate the responsible party for voidcompliance thecould authority user’s to by approved not modifications or changes Any reception. TV and radio to ininterference result may cables orunshielded equipment non-approved with Operation equipment. this with used be must cables interface FCC caution: To maintain compliance FCC with regulations, shielded ≥ ≥ ≥ ≥ one interference by or more of the following measures: off equipment and on, the user is encouraged to totry correct the to radio or reception, which television can bybe determined turning the installation.particular If does equipment this cause interference harmful in a occur not will interference that no guarantee is However, there communications. to radio interference harmful cause may instructions, the with accordance and can radiate radio frequency energy and, if not installed and used in uses generates, equipment This installation. residential a in interference harmful against protection reasonable provide to designed are Class B digital device, to pursuant Part 15of the FCC Rules. limitsThese for a limits the with to comply andfound been tested hasequipment This the device. Consult the dealer or an experienced radio/TV technician for help. for technician radio/TV experienced or an dealer the Consult connected. is receiver the which Connect the intoequipment an ona outlet circuit different from tothat and receiver. equipment the between separation the Increase Reorient theor relocate receiving antenna.

[BDT215]

[BDT210] VQT3B58 11

Connections & Settings DMP-BDT110_210_VQT3B58_eng.book 12 ページ ２０１１年５月１７日 火曜日 午後４時４３分

STEP 4 : Connecting to STEP 5 : Settings an AC power source Easy Setting

After connecting your new player for the 1st time and pressing the power button, a screen for the basic settings will appear.

R Preparation COMMUNICATION AUDIO CAMERA Turn on the television and select the appropriate video input on the television.

1 Press [Í POWER]. AC power supply cord (supplied) Setup screen appears. If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then setting information on the TV such as “On-screen Language” is acquired by this unit. To a household AC outlet 2 Follow the on-screen instructions and [For_units_with_PX_printed_on_the_outer_packaging] make the settings with [3, 4] and press If the power plug does not fit [OK]. your AC outlet, use the power plug adaptor (supplied). After completing “Easy Setting”, you can perform “Network If it still doesn’t fit, contact an Easy Setting”. electrical parts distributor for assistance.

≥ This unit consumes a small amount of AC power ( 39) even when turned off. In the interest of power ≥ You can perform this setup anytime by selecting “Easy Setting” in the conservation, if you will not be using this unit for an Setup menu. ( 33) extended period of time, it can be disconnected. Touch Free Sensor [BDT310] [BDT215] [BDT210] Install this unit so that the power cord can be unplugged from the By setting “Sensor” in “Touch Free Sensor” to “On”, you can open or close socket outlet immediately if any problem occurs. the tray just by waving your hand over the TOUCH-FREE SENSOR on the upper side of the unit. (This will also work when in stand-by.) ≥ Be aware that the TOUCH-FREE SENSOR may function unintentionally in the following cases: – When your hand or arm, an object, a small child, or a small animal comes close to the upper part of the unit – When an object is placed on top of the unit and vibration is applied – When connecting a cable etc. to the rear of the unit ≥ Reactive distance of the sensor is automatically set in accordance with the installation conditions at the time of power supply connection and when the open/close button is pressed. To prevent an incorrect setting, do not place your hands or objects above the unit at these times. ≥ Depending on the usage conditions, the TOUCH-FREE SENSOR may stop working or the reactive distance may become shorter. In such cases, press the tray open/close button once.

12 VQT3B58 Protected Setup), you can easily perform the settings. the perform easily can you Setup), Protected If you are using aWireless router that supportsWPS (Wi-Fi ∫ 2 1 ≥ ≥ ≥ Preparation settings. Followthe on-screeninstructions make to your connection [BDT310] “Wired” press and [OK]. Select 14. page to refer settings, the make to failed The configuration of your network is about to begin. Ifyou DMP-BDT110_210_VQT3B58_eng.book 13 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 13 DMP-BDT110_210_VQT3B58_eng.book Network EasySetting Select"Wireless." Wired : Wireless LANconnection: ConnectaLANcabletotheunitandselect"Wired." LAN cableconnection: Currentsetting Select aconnectionmode. advice. is still nochange in the display, consultthere If yourit. dealer for reconnect and disconnect Alternatively, inserted. is fully Adaptor LAN Wireless the that check displayed, [BDT110] key. encryption your know you that sure be please encrypted is connection wireless your If ( name network your Obtain “WPS (PUSH button method)” the make settings. and instructions on-screen follow the then [OK] (PUSH button method)” “WPS press and or network” for wireless “Search Select [OK]. and “Wireless” press Select Network Easy Setting Easy Network Wireless Settings access pointaboutconnectionmethods. Please refertotheoperatinginstructionsofyourwireless Select aconnectionmethod. Wireless connection Wireless Wired connection OK RETURN

: If “Wireless LAN Adaptor is not connected.” is is connected.” not is Adaptor LAN “Wireless If Wireless WPS (PUSHbuttonmethod) Search forwirelessnetwork Wired 15, SSID). 15, ≥ SSID. your enter and “SSID” select to [OK] Press 2 To display SSID input screen : 1 If your SSID is not displayed in step step in displayed not is SSID your If manually To SSID enter 3 2 encrypted is network wireless your When 1 displayed. be will networks wireless available The ∫ If your wireless network is encrypted, go to step step to go encrypted, is network wireless If your setting” Setting” “Connection select “Search for wireless network” Settings” Settings” Settings” [HOME] Press Enter your encryption key. encryption your Enter Press [OK] to select“Encryption Key”. ≥ Select your network name and press [OK]. MENU Wireless Settings XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX Select awirelessnetworkforconnection. SUB Wireless Settings Wireless Settings Enter theencryptionkeyofwirelessnetwork. Enter yournetworkname(SSID)toconnect. Encryption Key SSIDwill not bedisplayed, in thiscase entermanually. pressingthe [R] button on the remote control. Stealth If your network name is not displayed search again by Network name(SSID) Encryption Key _ Delete Finish OK SSID RETURN [OK] OK RETURN [OK] [OK] select “Network” “Network” select 0 -9 select “Setup” RG select “Wireless Settings” Settings” “Wireless select Search again 3 8 7 4 1 9 6 5 2 0 Set Set WXYZ GHI MNO TUV PQRS DEF ABC JKL 1234567890 ., ?! Space mno [OK] [OK] wxyz pqrs ghi def abc “’:; tuv jkl [OK] [OK] 1 select “Player “Player select , follow, these steps. []_ <>@ +-* #$& /= {} Reception \ I () `^ select “Manual B % ~ select “Network “Network select Y VQT3B58 2. [OK] [OK] 13

Connections & Settings DMP-BDT110_210_VQT3B58_eng.book 14 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Network Easy Setting When you experience (Home Network Connection Check)

problems with settings Network Easy Setting (Home Network Connection Check) Complete. 1. LAN cable connection : Fail 2. IP address setting : Fail Wireless Settings 3. Connection to gateway : Fail LAN cable is not connected. Wireless Settings Please check the connection. Select “Yes” and press [OK] to check network Failed to complete. connection again. Select “No” and press [OK] to finish Network Easy Setting. A conflict with another device occurred.

Do you want to configure wireless network connection setting again ? Yes No OK

Check the Yes No Display following OK 1. LAN cable connection or ≥ Connection of :Fail Wireless setting the LAN Display Check the following 2. IP address setting : Fail cables ( 10) A conflict with another ≥ Please wait a few moments, 3. Connection to gateway : Fail device occurred. and then try again. 1. LAN cable connection or ≥ Connection :Pass ≥ Setting of the Wireless router Wireless setting and settings for MAC Address etc. of the hub A time out error 2. IP address setting : Fail ≥ The signal may be weak. and router occurred. 3. Connection to gateway : Fail [BDT110] : Using the USB ≥ Settings of 1. LAN cable connection or extension cable supplied with :Pass “IP Address/ the Wireless LAN Adaptor, Wireless setting DNS adjust the position of the :Pass or Settings” Wireless LAN Adaptor. Home 2. IP address setting ( 32) An authentication error ≥ The SSID ( 15) and the network or a time out error encryption key of the Wireless available occurred. router. 3. Connection to gateway : Fail ≥ Please wait a few moments, and then try again. ≥ [BDT110] : Connection of Network Easy Setting (Internet Connection Check) Wireless LAN Adaptor Network Easy Setting (Internet Connection Check) A device error occurred. ≥ Contact our Customer Complete. Service Center or your - Connection to the Internet : Fail(Error code: B019) nearest dealer. Failed the connection test. Cannot find the server.(Error code: B019) Please refer to the owner's manual for the cause of the error and the solution for it. Press [OK].

OK

Display Check the following Cannot find the ≥ “Primary DNS” and “Secondary server. DNS” settings of “IP Address/ (Error code: B019) DNS Settings” ( 32) ≥ The server may be busy or the service may have been Failed to connect to suspended. Please wait a few the server. moments, and then try again. (Error code: B020) ≥ Settings of “Proxy Server Settings” ( 32) and the router

14 VQT3B58 prevent this occurrence. ( occurrence. this prevent to product one on code control remote the change to need will you once, at products both operates control remote the If you have morethan onePanasonic player/recorderand ≥ ≥ ≥ ≥ ≥ ≥ ≥ DMP-BDT110_210_VQT3B58_eng.book 15 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 15 DMP-BDT110_210_VQT3B58_eng.book * An (Service An SSID Set is IDentification) a name used by wireless LAN * information. secret or personal as such data of leaking party, thea third or intheresult by viewed beingillegitimately the content communication of may encryption without network a to connecting that be aware Please accordance the with settings of Wireless router. getting online onyour PC, theperform network on settings your PC in trouble have you When change. might router Wireless the of etc.) level, After network performing settings on this the unit, (encryptionsettings as illegal access. be regarded may networks these however,usingdisplayed; be may wireless networks for which (SSID*) you do not have usage rights During searches automatic in a wireless network environment, network for you which do not have usage rights. Do not use unitthis or Wireless LAN adaptor ( You can redothese individually settings “Network using Settings”. ( menu. Setup in the You perform by can selecting anytime setup this Setting” Easy “Network operating instructions. router Wireless the check supports WPS, router Wireless your whether relating to the connection and security LANof devices. wireless To see (Wi-Fi Setup)WPS isProtected a standard facilitatesthat settings Refer to instructionsthe ofoperating the hubor router. matches for both devices. both for matches SSID the if possible Transmission is network. a particular identify to control remote the Reprogramming 32) 32) 33, “Remote Control Code”) Control “Remote 33,

to connect to any wireless wireless any connect to to ≥ ≥ ≥ Settings” Settings” will bedisplayed. screen following the and restart will Unit display. unit’s the on displayed be will “FINISH” installed, is firmware the After perform any operation while the update takes place. or power the unit from DISCONNECT AC the DO NOT Update” Press [HOME] To updatethe firmware displayed. is message When anew firmware version is available, the following when connected to the Internetvia a broadband connection. This unit is capable of checkingthe firmware automatically operates. These updates are available freeofcharge. a feature way the improve or add may that unit this for firmware updated release may Panasonic Occasionally, “Automatic “Automatic Check”Update to “Off”. ( If you do not want to thecheck latestfor firmware version, set may work not dependingproperly on connection the environment. Downloading will require minutes. several It may take longer or Information”) To theshow firmware version unit. this on ( only.) in English is site (This http://panasonic.jp/support/global/cs/ firmware. update the to CD-R a to it burn website and following Internet, then canyou download firmwarethe latest from the the to connected not is unit this or fails unit this on downloading If Firmware updates Firmware [OK] [OK] select “Others” “Others” select select “Setup” “Setup” select Please updatefirmwareinSetup. Current Version The firmwarewasupdated. select “Update Now” “Update select New firmwareisavailable. : x.xx [OK] [OK] OK RETURN 33) select “Player “Player select select “Firmware 33, “System “System 33, VQT3B58 15

Connections & Settings DMP-BDT110_210_VQT3B58_eng.book 16 ページ ２０１１年５月１７日 火曜日 午後４時４３分

InsertingPlayback or removing HOME menu

Major functions of this unit can be operated from the HOME media menu.

Preparation Turn on the television and select the appropriate video input on the television.

CALL

SD CARD 1

[BDT310] [BDT215] [BDT210]

≥ When inserting a media item, ensure that it is facing the 1 Press [Í POWER] to turn on the unit. right way up. ≥ When removing the SD card, press on the center of the 2 Press [OK] or [3, 4, 2, 1] to select the card and pull it straight out. item. ≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the HOME instructions for the connected equipment. Blu-ray Disc Player Network

Photos Setup Music

Videos

≥ When a media is inserted, contents selection screen for that media is displayed. ≥ If there are any other items, repeat this step. ≥ To return to HOME menu, select “HOME” or press [RETURN] several times.

Disc Play back the contents. Videos/ ( 17, 21, 22) Photos/ SD card ≥ When multiple contents are Music recorded, select the types USB of contents or the title. Internet Displays the Home screen of Content VIERA CAST. ( 23) Network Home DLNA Client ( 24) Network Media Renderer ( 25) Player ( 29) Settings SD Card Setup ( 19) Management Changes the screen Wallpaper background of HOME menu.

To show the HOME menu Press [HOME].

≥ Items to be displayed may vary with the media.

16 VQT3B58 ≥ ≥ ≥ ≥ ≥ screen. display information may change or will disappear from the currently being played.Each time you press[STATUS], the The statusmessages give you information aboutwhat is [STATUS]. press playing, While ∫ ≥ MENU]. MENU/TOP Press [POP-UP Menu. or Pop-up Navigator Top Direct You show can Menu, ∫ 2 1 contents video Playing DMP-BDT110_210_VQT3B58_eng.book 17 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 17 DMP-BDT110_210_VQT3B58_eng.book BD  T1 C10:05.14 e.g.BD-Video (Compatible with STAR)ENERGY when paused, thedisplaying menu, pictures, still displaying etc.). button for aboutoperation 30 minutes no isTo there if automatically offelectricity, turned is on save power the been dragged and dropped, copied and topasted the media. have which video AVCHDMPEG2 playback to and possible not is It possible. DivX DivX appear. Depending onmedia and contents, the may display change or may not on. so and screen motor, television your [ Press ROTATE TO CONTINUE DISCS DISPLAYED. ARE MENUS WHILE Press [ Press T: Playlist PL: Chapter, C: Title, [OK]. To show the status messages To show menus instructions. the with 3D compatible video software, play back in accordance back playing while displayed is screen message a When [ Press [ press displayed, is menu the If media. the Insert the item. ( Current position Current [BDT310/210_for_Canada] DVD ∫ 3, STOP] STOP] you havewhen finished to protectplayback the unit’s 4, 3, 2 CD 16) 4 , 1 Elapsed time in the title the in time Elapsed ] to the select title press and ] to select the item and press [OK]. press and item the select to ] SD and MKV: Successive play is not USB

when not playingwhen back as(such Total time 3, 0:20.52 4, 2, ] to select select 1] to BD-Video Play

Search ≥ [ Press ≥ ≥ [ Press function play Resume is memorized. position stopped The [ Press contents. and media the on depending work not may functions These language, etc. language, soundtrack or number channel audio the change You can [AUDIO]. Press ≥ ≥ ≥ [ paused, press While ≥ play. to want you track or chapter title, the to Skip [ or playing [: paused,While press ≥ steps. 5 to up increases speed The ≥ [SEARCH [SEARCH paused, press While Slow-motion ≥ [SEARCH playing,press While [SEARCH 9 Press [ function does not work. play resume the BD-J, including discs BD-Video On BD-Video and AVCHD: direction Forward [ Press [ backward. Press andhold to changeinsuccession forward or Eachpress increases the number of skips. Press [ only. BD-Video and AVCHD: direction Forward [SEARCH MusicandMP3: The speed isfixed to asingle step. [ The cleared positionthe is tray opened is if oryoupress ∫ STOP] several times to display “STOP”STOP]unit’s display. the display to on times several Other operations during play during operations Other Search/Slow-motion Pause Stop Changing audio Frame-by-frame Skip ]. PLAY] to restart from this position. this from 1PLAY] restart to ;PAUSE] again or [ 1PLAY]to revert to normal playback speed. 1PLAY]to revert to normal playback speed. ; ∫ STOP]. PAUSE]. 5 5 ]. ]. 2 1PLAY] to restart play. ] (2;)or [ 6 6 1 ] or ] or 1 ] ( VQT3B58 ;1 ] or ] or ] ( ;1). ) only. 5 17 ]

Playback DMP-BDT110_210_VQT3B58_eng.book 18 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Useful functions Regarding DivX

[BDT310/210_for_Canada] 1 Press [SUB MENU]. ABOUT DIVX VIDEO: 2 Select an item, then press [OK]. DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit While Direct Navigator screen is displayed divx.com for more information and software tools to convert To display the titles properties (recording your files into DivX video. Properties date, etc.). View ABOUT DIVX VIDEO-ON-DEMAND: To select the chapter. This DivX Certified® device must be registered in order to Chapters play purchased DivX Video-on-Demand (VOD) movies. View To play playlists. To obtain your registration code, locate the DivX VOD Playlists section in your device setup menu. View Titles To select the title. Go to vod.divx.com for more information on how to complete your registration. Select To switch to another folder. ≥ Video images of the copyright-protected DivX contents Folder stored on USB device can be output only through the HDMI output terminal. While playing Display the unit’s registration code. When black bars are shown at the top, ( 33, “DivX Registration” in “Others”) Screen bottom, left, and right sides of the screen, Aspect you can enlarge the image to fill the screen. DivX Registration Top Menu To display Top Menu. The registration code is necessary to register this unit to play protected Pop-up DivX videos. To display Pop-up Menu. Menu Registration Code: XXXXXXXXXX 10 alphanumeric Menu To display Menu. Please register at www.divx.com/vod/ characters 2D video can be virtually output as 3D, or 3D Settings output effect of the 3D video can be setup. ( 20)

≥ Depending on the played contents if you perform “Screen Aspect”, there may be no effect. ≥ After playing DivX VOD content for the first time, the ≥ When “TV Aspect” ( 31) is set to “4:3 Pan & Scan” or registration code is not displayed. “4:3 Letterbox”, the “Zoom” effect in “Screen Aspect” is ≥ If you purchase DivX VOD content using a registration disabled. code different from this unit’s code, you will not be able to play this content. Cancel the unit’s registration. ≥ Depending on the media and contents, displayed items are different. ( 33, “DivX Registration” in “Others”) Press [2, 1] to select “Yes” in “DivX Registration”. Use the deregistration code to cancel the registration in ∫ Displaying subtitle text www.divx.com. You can display subtitle text on the DivX [BDT310/210_for_Canada] and MKV video disc with this Regarding DivX VOD content that can only unit. The operation might be different or it may not operate be played a set number of times properly depending on the way the file was made or the Some DivX VOD contents can only be played a set number state of this unit (playing, stopped, etc.). of times. When you play this content, the number of times already played and initially playable number of times is Set “Subtitle” in “Disc” ( 27) displayed. ≥ The remaining number of plays decreases each time a program is played. However, when playing from the point ≥ DivX and MKV video files that do not display “Text” do not contain where play was previously stopped, the remaining number subtitle text. ≥ If the subtitle text is not displayed correctly, try changing the language of plays does not decrease due to the resume play settings. ( 29) function. ≥ This function has no relation to the subtitles specified in DivX standard specifications and has no clear standard.

18 VQT3B58 7 6 5 4 3 2 1 delete data with the following operation. If you no longer need data recorded on the SD card, you can ∫ 3 2 1 ≥ storage). (local memory external the into function, additional contents are required to be downloaded BD-Live the using back played are discs compatible this unit to the Internet. Since mostthe of BD-Live subtitles, exclusiveimages and online games byconnecting as such functions more enjoy to you allows BD-Live DMP-BDT110_210_VQT3B58_eng.book 19 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 19 DMP-BDT110_210_VQT3B58_eng.book inserted. card SD no is there when used be cannot function BD-Live This unit is using an SD card as alocal storage device. Press [ Press [ [OK]. press and Card” SD “Format Deleting data/Formatting SD cards disc. the Insert space. free more or GB 1 with card SD an Insert settings. ( and connection network Perform Press [ Press [ “Setup”. select to [OK] Press Press [HOME]. card. SD an Insert picture-in-picture in BD-Videopicture-in-picture or BD-Live Enjoying SD CardManagement Internet BD-Livediscswith Enjoying SD card 2 2 3 1 OK RETURN , , , Management”. Card “SD select to ] ] to select “Start” and press [OK]. press “Start” and 1] to select ] to select “Yes” and press [OK]. press “Yes” and select to 1] ] to select “BD-Video Data Erase” or or Erase” Data “BD-Video select to 4] BD-Video DataErase 0 13) 10, Free space300MB No. ofFiles6 Format SDCard Format thisSDCard. To turnon/off secondary video and audio or “Off”or “On” to Video” “Secondary in “Soundtrack” ≥ ≥ ≥ ≥ ≥ ≥ ≥ Type” “Signal [DISPLAY] “Off”, secondary audio will not beplayed ( When “BD-Video Audio”in Secondary “Digital Audio Output” set is to displayed. is video the primary only or frame-by-frame, During search/slow-motion Internet. the via provider content the to sent be may When discs are BD-Live supporting back, theplayed player or IDs disc ( “BD-Live Internet may Access” need to be changed for certain discs recovered. be cannot It erased. this unit. theIf SD card you use is formatted, all data on the card will be card on the formatTo you that recommended is it function, BD-Live use account. an on acquiring information Follow the display screen manualor instruction of the disc for Internet account to be in order created to theaccess BD-Live content. require an may discs Blu-ray the on available content BD-Live Some website. disc, please refer to the instructions on the disc and/or visit their The usable functions and the operating may method with vary each 29). Playing picture-in-picture select “Disc” “Disc” select [OK] [OK] Secondary video Primary video Primary set “Video” and set “Video” and 30). [ 1 ] VQT3B58 select 19

Playback DMP-BDT110_210_VQT3B58_eng.book 20 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Enjoying 3D video Useful functions You can enjoy powerful 3D videos with realistic sensations by connecting this unit with a High Speed HDMI Cable to a 1 While playing 3D compatible TV. Press [ ]. 2 Select an item, then press [OK].

Original Keep original picture format. Signal Side by 3D picture format comprising of Format side left and right screens. 2D to 3D Converts 2D pictures to 3D effect. Playback pictures with normal 3D Normal effects. You can enjoy 3D pictures with a The image is an illustration. Soft feeling of broadness, holding Preparation back the depth perception. Connect 3D compatible TV to an HDMI AV OUT terminal of Set 3D effect manually. this unit using a High Speed HDMI Cable. ( 8, 9) ≥ Perform the necessary preparations for the TV. Distance 3D Set the amount of depth Method of playback is the same as normal disc playback. Picture perception. ( 17) Mode Screen Type ≥ Playback following the instructions displayed on the Selects how the screen appears Manual screen. during 3D playback (flat or Settings round). Frame Width Set the amount of feathering at 3D settings the edge of screen. Frame Color Perform the following settings as necessary. Set the color of feathering at the edge of screen. It is also possible to play back 3D 3D BD-Video It appears also by pressing [SUB MENU] and selecting “3D discs in 2D (conventional video). Playback Settings”. ( 29)

If 3D video cannot be played back in 3D, change the settings as required ≥ Depending on the contents, displayed items are different. by the connected TV format. ( 31) ≥ Please refrain from viewing 3D images if you do not feel well or are 3D Type ≥ Change the settings for 3D on the experiencing visual fatigue. In the event that you experience dizziness, nausea, or other discomfort TV also when “Checker board” or while viewing 3D images, discontinue use and rest your eyes. “Side by side” is selected. ≥ Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D If the amplifier/receiver is connected setting on the TV. [BDT310] to the HDMI AV OUT SUB terminal ≥ 3D images may not output as settings of “HDMI Resolution” and “24p Output”. ( 31) HDMI(SUB) ( 9), set to “V.OFF”. ( 31) Output Mode ≥ HDMI (SUB) V.OFF LED on this unit will light. ( 31) 3D Playback Hide the 3D viewing warning screen. Precautions ( 31) Adjust the pop-up position for the Pop-Out Level Playback menu or message screen etc. ( 28)

20 VQT3B58 Press [POP-UP MENU/TOP[POP-UP MENU]. Press screen To the exit Press [STATUS].Press screen To the exit [STATUS] twice. or press once playing, While ∫ 3 2 1 terminal. HDMI an via TV compatible 3D HD a Full to connected be In order to play back 3D still pictures (MPO), this unit should device) CD-R/RW,DL, DVD-R/-R USB SD Card, (BD-RE, pictures still Playing DMP-BDT110_210_VQT3B58_eng.book 21 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 21 DMP-BDT110_210_VQT3B58_eng.book Equipment Manufacturer Size 500x375 Date 11/12/2007

BD picture and and [OK]. picture press [OK]. press To show the stillpicture properties Press [ [ Press slideshow. on played are that pictures still or folders Toselect 2D) in back played are View” “2D playback in 3D,select from“3D View”. (Still pictures in To here. sorted are (MPO) pictures still 3D : View” “3D [ Press [ press displayed, is menu the If media. the Insert the item. ( Photo View MENU SUB GBY B RG SD card DVD 2D View 2 , 3, 3, OK RETURN ] to display the previous or next still picture. still next or previous the display to 1] 3D View CD 16)

4 4 Slideshow , ] theto folder select and 2 SD , 1 Folder Name XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXX XXXXXXXX Select Page Up ] to select the still USB 1 /26 3, aeDw Page Page Down 4, 2, Photos 01/02 105 48 77 58 42 5 ] to select select 1] to While playing While displayed is screen View Photo While 2 1 ≥ ≥ ≥ ≥ Slideshow Level Pop-Out Wallpaper Left Rotate Rotate Right Status Aspect Screen Slideshow Start Still pictures displayed as “ ” cannot be played back with this unit. this with back be played cannot ” “ as Still displayed pictures music. background as back be played to priority has CD music the unit, this into inserted When both the music CD and the USB with device recorded MP3 is interval notmay become shorter. display the changed, is setting the if longer.become Even may interval When a picture still large with of pixels number is theplayed, display items are different. displayed contents, media and unit the of condition on the Depending Select an item, then press [OK]. press then item, an Select MENU]. [SUB Press Useful functions slideshow of JPEG on the SDcard.) the during back played be can also USB deviceor the SDcard. (Amusic CD back during the slideshow of JPEGthe on An MP3 on the USBdevice canplayed be Soundtrack order. Background musicis played inrandom Soundtrack Random slideshow. Repeat Repeat Play method. display Set Effect Transition interval. display the Change Interval Display constant interval. a at one by one pictures still display You can Start Slideshow 3D playback. during adjusted be can etc. screen message Pop-up position for the Playback menu or HOME screen. of wallpaper the to picture still the Set Rotate the still picture. properties. picture still the Show mode. screen the Switch slideshow. the Start

( 16) VQT3B58 21

Playback DMP-BDT110_210_VQT3B58_eng.book 22 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Playing music

DVD CD USB (DVD-R/-R DL, music CD, CD-R/RW, USB device)

1 Insert the media. If the menu is displayed, press [3, 4, 2, 1] to select the item. ( 16)

2 Press [3, 4] to select the track and press [OK].

DIRECT NAVIGATOR Music list 0.09 4.30 CD Track1 5 Tracks / Total Play Time 20min54sec No. Track Name Play Time 01 Track1 4min30sec 02 Track2 3min41sec 03 Track3 4min30sec 04 Track4 3min11sec 05 Track5 5min 2sec

Play RETURN

“ ” indicates the track currently playing.

Playing a track in another folder

1 While the Direct Navigator screen is displayed Press [SUB MENU]. 2 Press [3, 4] to select “Select Folder” and press [OK].

≥ You cannot select folders that contain no compatible tracks.

22 VQT3B58 ≥ ≥ change without notice. without change Images arefor illustration purposes, contentsmay 2 1 Toenjoy video communication (ex. Skype ≥ ≥ Preparation Picasa WebAlbums. (Currentas of December 2010) Home screenwith VIERA CAST,for example YouTube, the from services Internet of a selection access You can VIERA CAST Enjoying VIERA CAST Home screen; Home CAST VIERA DMP-BDT110_210_VQT3B58_eng.book 23 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 23 DMP-BDT110_210_VQT3B58_eng.book (This site is inEnglish only.) http://panasonic.jp/support/global/cs/ For operating methodrefer to the following website. – advice. available. Please consult your local Panasonic dealer for Depending on the area, this optional cameramay not be (TY-CC10W or compatible equipment). Connect this unit withoptional Communication Camera Network setting( Network connection( XXXXXXXXXXX Featured Videos press [OK]. press USB port on the front of this unit. this of front on the port USB the via Camera Communication the connect connection, [BDT110] [ buttons: Operable [ Press ≥ ≥ CAST]. Press [VIERA number buttons number New York,NY Watch Instantly TopShows TV Hit Movies TOMORROW 3, 69 carefully and then press [OK]. press then and carefully instructions these read Please displayed. is Message be can NETFLIX and ] button, button. [NETFLIX] by directly accessed [ by pressing directly accessed be can service communication video The RL ° XXXXXX AUDIO OUT 4, L H NW 10 mph Weather 56 76 ° ° 2, : When this unit is connected bywireless LAN 3 VIDEO OUT 1 , ], [OK], [RETURN], colored buttons, colored ], [RETURN], [OK], 4, COMMUNICATION 13) 2, CAMERA MORE BACK TY-CC10W Communication Camera 10) 1 10BASE-T/100BASE-TX ] to select the item and and the] to item select LAN Back of the unit the of Back

Featured Photos VOT MI AVOUTSUB AV OUTMAIN XXXXXX TM ) : TM

≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ ≥ Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU]. MENU/TOP [POP-UP or [HOME] [EXIT], Press ToCAST VIERA from exit The services through VIERA CAST VIERA through services The VIERA CAST VIERA ( function. CAST VIERA the use able to displayed on the screen. If firmware isthe not updated, you be will not is notice update a firmware when firmware the update to Be sure is recommended. correctly. A high-speed with Internet service a speed of at least 6 Mbps If using Internetslow the connection, video may not be displayed displayed is time wrong When – distorted. is audio the When – When therestricting use of CAST. VIERA – Settings” ( In the following settings cases, usingpossible are “Internet Content CAST be cannot byaccessed [VIERA pressing CAST]. When playing content from carda disc/SD and/or USB device VIERA presented in specific languages. specific in presented Some content may only be available for countriesspecific and be may Some content may be inappropriate for viewers.some available. be not may service the of or content websites of All features services. the of continuity or the content the for nowarranty make Therefore, will Panasonic notice.permanently without or either temporarily discontinued be may service and service providers, 32) TM home isscreen subject to change without notice. TM are by theiroperated respective 15) VQT3B58 23

Playback DMP-BDT110_210_VQT3B58_eng.book 24 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Playing contents saved Playing back contents on the on other equipment DLNA server (DLNA) It is possible to play back the video, still pictures, and music You can enjoy viewing a content saved on other equipment in the shared folder of the Windows 7 operating system. (Windows 7 operating system, smartphone, etc.) connected to the home network with this unit. Preparation Perform steps 1 and 2. Preparation 3 Add the contents and folder to the Windows Media® 1 Perform network connection and network settings of this Player library. unit. ( 10, 13) ≥ Playlist of Windows Media® Player can play back only 2 Perform Home Network settings of the connected the contents that are stored in the libraries. equipment.

For details about the setting and operation method of 1 Press [HOME]. connected equipment, and compatible equipment, refer to the following Website and the operating instructions for 2 Press [3] to select “Network”. each item of equipment. http://panasonic.jp/support/global/cs/ (This site is in English only.) 3 Press [3] to select “Home Network”.

4 Press [3] to select “DLNA Client”. ≥ A list of equipment connected via the network is displayed. ≥ This list can be updated by pressing [R] on the remote control. e.g.

DLNA Client

XXXXXX

OK Servers found on the network are displayed. RETURN Please select one. Update

5 Press [3, 4] to select the equipment to playback the contents, and press [OK].

6 Press [3, 4, 2, 1] to select the item to playback (folder), and press [OK]. ≥ You may be able to use convenient functions depending on the disc or content by pressing [SUB MENU] or [DISPLAY]. ≥ Control Panel is displayed once Control Panel the playback starts. e.g. Operation can be performed EXIT with [3, 4, 2, 1], [OK] and [EXIT]. ≥ Press [OK] if the Control Panel is not displayed. ≥ Press [RETURN] to hide the Control Panel.

To exit from Home Network Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].

24 VQT3B58 4 Press [HOME]. Press screen Renderer Media from Toexit 5 4 3 2 1 3 1and2. ( steps Perform Preparation ≥ DMC (Digital Media Controller)compatible equipment. shared folder of theDLNA server bycontrolling withDLNA It is possible to play back the video or stillpictures the in DMP-BDT110_210_VQT3B58_eng.book 25 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 25 DMP-BDT110_210_VQT3B58_eng.book DMC. the and server DLNA the as serve application compatible Windows Media Windows ≥ Perform the “Remote Device Settings”. ( Settings”. Device “Remote the Perform Operate the DMC compatibleequipment. DMC the Operate [ Press [ Press [ Press [HOME]. Press Windows Media the of libraries the to folder and contents the Add ≥ registered is16. The maximum number of equipment that can be the contents that are stored in the libraries. the in stored are that contents the Playlist of Windows Media DLNA server using DMC DLNA serverusing the contents in the Play back ] to select “Media Renderer”. “Media select 1] to Network”. “Home select 3] to “Network”. select 3] to ® Playerand asmartphone that has the ® Player or thesmartphone, etc. 24) ® Player can play back only 33) ≥ ≥ ≥ ≥ ≥ ≥ be dropped during playback, or video may not playback at all. at playback not may video or during playback, be dropped may frames video PC, the connected of performance Depending onthe DMC. using controlled when only equipment connected via back played be can unit This unit. Items in displayed gray on the cannot display be played back this by possible. be not may playback equipment, connected and the contents on the Depending to this Select unit. the bycontents repeating the operation. connected equipment on the depending bedifferent will structure Menu system to prevent access. unauthorized security adequate has network home your for router the that Ensure VQT3B58 25

Playback DMP-BDT110_210_VQT3B58_eng.book 26 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Linked operations with Power off link

the TV (VIERA LinkTM “HDAVI ControlTM”) All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you switch the television off. What is VIERA Link “HDAVI Control”?

VIERA LinkTM is a new name for EZ SyncTM. Playing music continuously even after turning off power VIERA Link “HDAVI Control” is a convenient function to the television that offers linked operations of this unit, and a When the unit is connected to a Panasonic TV (VIERA) that Panasonic TV (VIERA) or amplifier/receiver under supports HDAVI Control 2 or later and an amplifier/receiver “HDAVI Control”. supports VIERA Link. You can use this function by connecting the 1 While playing music equipment with an HDMI cable*. See the operating Press [SUB MENU]. instructions for connected equipment for operational 2 Press [3, 4] to select “TV Power” and press [OK]. details.

* [BDT310] : Only when connecting via an HDMI AV OUT MAIN terminal on this unit. Easy control only with VIERA Preparation remote control 1 Set “VIERA Link” to “On” ( 32). (The default setting is Only TV supports “HDAVI Control 2” or later “On”.) By using the TV remote control, you can play discs using the 2 Set the “HDAVI Control” operations on the connected “Control Panel” and display the Top Menu or Pop-up Menu, equipment (e.g., TV). etc. 3 Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control” function works properly. 1 Press [SUB MENU]. Control Panel Also when the connection or settings are changed, repeat this procedure. 2 Select an item, then Screen Aspect press [OK]. Top Menu Automatic input switching Pop-up Menu SUB OK Power on link MENU RETURN

When the following operations are performed, the television ≥ The sub menu may not appear will automatically switch the input channel and display the while the Top Menu for BD-Video or DVD-Video is corresponding action. When the television is off, the displayed. television will automatically turn on. – When play starts on the unit – When an action that uses the display screen is performed ≥ The buttons that you can use for this unit vary depending on the TV. For (e.g., Direct Navigator screen) details, refer to the operating instructions of the TV. ≥ The operation of this unit may be interrupted when you press ≥ [BDT310] : When “HDMI(SUB) Output Mode” ( 31) is set incompatible buttons on the TV remote control. to “Normal” and the power of the device connected to the ≥ This unit supports “HDAVI Control 5” function. HDMI AV OUT SUB is turned on, the Power on link to the “HDAVI Control 5” is the newest standard (current as of December, 2010) for Panasonic’s HDAVI Control compatible equipment. This device connected to the HDMI AV OUT MAIN will not standard is compatible with Panasonic’s conventional HDAVI work. equipment. ≥ VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. ≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

26 VQT3B58 Press [DISPLAY]. Press screen To the exit Regarding Language: ( change. or select cannot you that items stopped, etc.) andmedia contents,there may be some (playing, unit the of condition the on Depending 4 3 2 1 Playback menu Settings DMP-BDT110_210_VQT3B58_eng.book 27 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 27 DMP-BDT110_210_VQT3B58_eng.book e.g., BD-Video e.g., eu Items Menus Audio Video Play Disc press [ press press [ press Someitems canchanged be by pressing [OK]. [ Press [ Press [ Press [DISPLAY].Press 1 1 3 3, 3, Subtitle Signal Type Subtitle Style ]. ]. , 4, 4 4 ] to the select setting. ] to the select menu and 2, 1 38) ] to select the item and and the] to item select f Main Off - Settings Angle 1ENG - Subtitle Style Subtitle on the media. Turn the subtitle on/off, and change the language depending Subtitle soundtrack. the change or Show Soundtrack appears. video original of method recording The Video Signal Type ≥ Select the numberofthe angle. Angle ( Select the audio channel number. channel Audio style. subtitle the Select Video Secondary Video Primary Some items may be changed only on the disc menu. specific ( 7 “Changing audio”) 17, Disc Soundtrack Soundtrack Video Video the language. Select on/off of audio and video appears. original of method recording The images. of on/off Select language. Select the type of audio or original video appears. of method recording The VQT3B58 17) 27

Settings Playback DMP-BDT110_210_VQT3B58_eng.book 28 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Progressive Play Select the method of conversion for progressive output to suit the type of material being played. Repeat Play ≥ When the content is distorted change the settings from (Only when the elapsed time is being displayed on the unit’s “Auto” to “Video”. display.) Select the item which you want to repeat. The items 24p displayed differ depending on the type of media. Movies and other material recorded on DVD-Video at 24p Select “Off” to cancel. are output at 24p. ≥ Only when you have selected “On” in “24p Output” ( 31). Random Select whether or not to play random. Playback Information Window Audio [BDT310] [BDT215] [BDT210] Displays the following. Sound Effects*1, *2 Audio/video attribute information of disc. Select the sound effect. ≥ Digital Tube Sound [BDT310] [BDT215] [BDT210] : Settings status of “Digital Audio Output” ( 30). This feature gives you warm sound, like that produced by HDMI output information. a vacuum tube amplifier. *&/+ ([BDT310] : First: HDMI(MAIN), Second: HDMI(SUB)) ≥ Re-master : This feature gives you brighter sound by increasing the high frequency portion of the audio. (Discs recorded at Press [RETURN] to exit. 48 kHz or less) Recommended setting Pop-Out Level (Only when “Full HD” is selected in “3D Type” ( 31).) Re-master 1 Pop and rock Pop-up position for the Playback menu or message screen Re-master 2 Jazz etc. can be adjusted during 3D playback. Re-master 3 Classical ≥ Night Surround : Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it Video can be heard easily.

Picture Dialog Enhancer*2 Select the picture quality mode during play. The volume of the center channel is raised to make dialog ≥ If you select “User”, you can make further adjustments. easier to hear. Press [1] to select “Picture Adjustment” and press [OK]. ≥ 3D NR: High Clarity Sound [BDT310] [BDT215] [BDT210] Reduces the rough noise in the background to give a When connected to TV via the HDMI terminal for outputting greater feeling of depth. image, it produces clearer sound. When “24p Output” is set to “On”, this function may not ≥ Only when you have selected “Enable” in “High Clarity operate. ( 31) Sound” ( 30). ≥ Integrated NR: Smoothes block noise and reduces the smudging that *1 Not every function can be set individually. appears around contrasting sections of the picture. *2 This function is effective for audio from the HDMI terminal or the OPTICAL terminal only when “Digital Audio Output” is set to “PCM” ( 30). (However, in this case, audio is output as 2ch from the Advanced Settings OPTICAL terminal.)

Chroma Process The high-resolution processing of HDMI chroma signals produces a high-resolution picture with rich picture quality.

Detail Clarity The picture is sharp and detailed.

Super Resolution Pictures of normal image quality are corrected to sharp and detailed images when output as 1080i/1080p from HDMI AV OUT.

28 VQT3B58 ≥ 6 5 4 3 2 1 intacteven if you switch the unit to standby. remain settings The necessary. if settings unit’s the Change menu Setup DMP-BDT110_210_VQT3B58_eng.book 29 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 29 DMP-BDT110_210_VQT3B58_eng.book ≥ ≥ ≥ Don’t forget your password. The following items use thesame password. password the About the on-screen for theinstructions operation. There may be differences in operation If methods. happens, this follow “Lock” ( Ratings” “BD-Video Ratings” “DVD-Video and press [OK]. press and [OK]. press [OK]. Press [ Press steps. these repeat items, other any are there If [ Press [ Press [ Press “Setup”. select to [OK] Press [HOME]. Press Player Settings Audio Video Disc Others Network TV /DeviceConnection Display OK RETURN 32) 3 3, 3, Settings”. “Player select 4] to , 4 4 4 , ] to the select menu and ] to select the item and press press and the item ] to select 2 , 1 ] to select the option ≥ Subtitle Language ≥ ≥ audio. for language the Choose Language Audio software. Select the playback method3D of compatible video 3D BD-Video Playback ≥ play. BD-Video of limit age an Set BD-Video Ratings ≥ play. DVD-Video limit to level ratings a Set DVD-Video Ratings DivX for used language the to according item suitable a Select Text Subtitle ≥ used. You can restrict Internet access when BD-Live functions are ( Internet BD-Live Access ≥ menus. disc the for language the Choose Language Menu ≥ ≥ subtitle. the for language the Choose select “Other “Other select select “Other “Other select “Other select Thisitem is displayed onlyafter playing back afile. Enter acode( will be selected. disc each of language original the selected, is “Original” If screen is shown. password with the number buttonswhen the password Follow theon-screen instructions. Enter4-digit a screen is shown. password with the number buttonswhen the password Follow theon-screen instructions. Enter4-digit a certificates. owner content have which contents BD-Live for only permitted is access Internet is selected, If (Limited)” “Allow Enter acode( Enter acode( disc. language will automatically appear if available on that that of subtitles available, not is Language” “Audio for selected language the and selected is “Automatic” If Disc [BDT310/210_for_Canada] ¢¢¢¢ ¢¢¢¢ ¢¢¢¢ 38) with the number buttonswhen you 38) with the number buttonswhen you 38) with the number buttonswhen you ”. ”. ”. or MKV subtitles text ( text subtitles MKV or 19) VQT3B58 18). 29

Settings DMP-BDT110_210_VQT3B58_eng.book 30 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Downmix Video Select the downmix system of multi-channel to 2-channel sound. Still Mode (paused video) ≥ Select “Surround encoded”, when the connected Select the type of picture shown when you pause playback. equipment supports the virtual surround function. ≥ There is no effect on “Bitstream” via HDMI AV OUT and Auto Automatically selects the type of picture shown. DIGITAL AUDIO OUT. Field Select if jittering occurs when “Auto” is selected. ≥ The audio will be output in “Stereo” in the following cases: – AVCHD playback Select if small text or fine patterns cannot be Frame – Playback of secondary audio (including the button click seen clearly when “Auto” is selected. sound).

Seamless Play 7.1ch Audio Reformatting The chapter segments in playlists are played seamlessly. [BDT310] [BDT215] [BDT210] Surround sound with 6.1ch or less is automatically ≥ Select “On”, when the picture freezes for a moment at the expanded and played back at 7.1ch. chapters segment in playlists. ≥ If “Off” is selected, sound is played over the original Black Level Control number of channels. (Note that in the case of 6.1ch audio, playback will be at 5.1ch.) Select lighter or darker for adjusting the black level control to ≥ Audio reformatting is enabled in the following cases: the desired setting for picture enhancement. – When you have selected “PCM” in “Digital Audio Output”. – When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM. Audio – BD-Video playback

Dynamic Range Compression High Clarity Sound [BDT310] [BDT215] [BDT210] When connected to TV via the HDMI terminal for outputting You can listen at low volumes but still hear dialog clearly. image, it produces clearer sound. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) ≥ Set to “Enable” and then set “High Clarity Sound” on the ≥ “Auto” is effective only when playing Dolby TrueHD. Playback menu to “On”. ( 28) Digital Audio Output Audio Delay Press [OK] to show the following settings: Synchronization between picture and sound is corrected by Dolby D/Dolby D +/Dolby TrueHD adjusting the delay time of the audio output. DTS/DTS-HD Select the audio signal to output. ≥ Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment. ≥ Not making the proper settings may result in noise.

BD-Video Secondary Audio Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). ( 19) ≥ If “Off” is selected, the unit outputs the primary audio only.

PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the DIGITAL AUDIO OUT. ≥ If “On” is selected, the signals that are converted to 48 kHz are output. ≥ If “Off” is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally. ≥ Signals are converted to 48 kHz despite the settings in the following cases: – when the signals have a sampling frequency of 192 kHz – when the disc has copy protection – when “BD-Video Secondary Audio” is set to “On”

30 VQT3B58 Press [OK] to show the following settings: the following to show [OK] Press 3D Settings Information about the software usedbythis unit isdisplayed. License V.OFFHDMI(SUB) Control LED ≥ display. unit’s the of brightness the Changes Front PanelDisplay ≥ ≥ ≥ This isto prevent burn-in on the screen. Function Saver Screen messages. on-screen and menus for language the Choose Language On-screen automatically. messages status show to whether Choose Status Messages ≥ not. V.OFFor LED (SUB) HDMI the light to Set DMP-BDT110_210_VQT3B58_eng.book 31 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 31 DMP-BDT110_210_VQT3B58_eng.book playing back the 3D compatible video software. video compatible 3D the back playing Set to display or hide the 3D viewing warning screen when Precautions 3D Playback ≥ TV. connected the of format the Select 3D Type and bright not during playback. during not bright and playback during dimmed is display the selected is “Auto” If switches to the otherstates automatically. screen Navigator Direct while, a for operation no is there if setting, the of regardless MP3, or [CD-DA] Music for As available. not is function this etc., pausing, and playing While automatically. menu HOME to switches screen Navigator Direct more, or minutes 10 for operation no is there If “On”: to set is this When HDMI AV OUT SUB is on. is AV SUB HDMI OUT “V.OFF”, and the power of the connected equipment to the to set is Mode” Output “HDMI(SUB) when light will This “Checkerboard” or “Side byside” is selected. when also TV the on 3D for settings the Change Display TV / Device Connection /Device TV [BDT310] Press [OK] to show the following settings: HDMI Connection image: ratio 4:3 playing When connected to a16:9 widescreen television and ratio image: When connected to a4:3 aspect television and playing 16:9 connected. television of type the match to Set Aspect TV 16:9 Full 16:9 Letterbox 4:3 Scan 4:3 Pan & HDMI(SUB) Output Mode Mode HDMI(SUB) Output cable. HDMI an using connected is unit the when signal image Thissetting is forselecting color-space conversionofthe HDMI ColorMode ≥ ≥ ≥ recorded at 24p areoutput at 24p. output usingHDMI an cable, movies andother material When this unit is connected to aTV supporting1080/24p 24p Output indicated on the screen as “ are devices connected the by supported items The HDMI Resolution terminal or not. AV SUB HDMI OUT the from video the output to Set ≥ ≥ is selected, the imagesmay be distorted. accordance with the film materials film the with accordance contentsare recorded in 24 frames/second in movie BD-Video Many film). (motion-picture second per frames 24 of rate a at recorded image progressive A 24p : imagesare output at 60p. When BD-Videoimages other than 24p areplayed, ( “Video” in “24p” set then and “On” to set DVD-Video, playing When must also be 1080p compatible. is connected to anHDTV through other equipment, it compatible HDTV (High Definition Television). Ifthis1080p unit to directly unit the connect to need you To enjoy high-definition video up-convertedto1080p,television. connected the to suited best resolution output the selects automatically selected, is “Auto” If stretched 16:9 image. horizontally a as displayed is Video center of the screen. the in image ratio a4:3 as displayed is Video picture. top and bottom of the Black bands appear at the Letterbox”. as “4:3 output is video BD-Video, playing When the picture fills the screen. The sides arecut off so 28) to “On”. ¢ ”. When any item without “ without item any When ”. [BDT310] . VQT3B58 31 ¢ ”

Settings DMP-BDT110_210_VQT3B58_eng.book 32 ページ ２０１１年５月１７日 火曜日 午後４時４３分

HDMI Audio Output Proxy Server Settings This setting selects whether or not to output audio from This is for checking the state of connection with the Proxy HDMI. server and performing settings. ≥ Select “Off” when the TV is connected to this unit via an Press [OK] to show the respective setting. HDMI terminal, and this unit is also connected to other devices, such as an amplifier/receiver via an OPTICAL Internet Content Settings ( 23) terminal. (VIERA CAST) Press [OK] to show the following settings: VIERA Link Set to use “HDAVI Control” function when connected with Lock an HDMI cable to a device that supports “HDAVI Control”. You can restrict the usage of VIERA CAST. ≥ Select “Off” when you do not want to use “HDAVI ≥ Follow the on-screen instructions. Enter a 4-digit Control”. password with the number buttons when the password screen is shown. Deep Color Output This setting is for selecting whether to use Deep Color Audio Auto Gain Control output when a television that supports Deep Color is Volume that is different depending on the contents is connected. adjusted automatically to the standard volume while using the VIERA CAST. Contents Type Flag ≥ Depending on contents, this function effect will not Depending on the playback content, the TV will output work. adjusting to the optimal method when a TV that supports ≥ Select “Off” when the audio is warped. this function is connected. Time Zone By selecting the time zone, it is possible to set the unit’s time to match your location. ≥ Some VIERA CAST contents require the time zone to Network be set. Set the time zone if necessary. DST Network Easy Setting ( 13) Select “On” when using Daylight Saving time. Network Settings Perform network-related settings individually. Network Drive Connection Press [OK] to show the following settings: It is possible to access the shared folder of equipment not compatible with DLNA, such as the Windows XP operating system, and play back video, still pictures, and music on LAN Connection Mode this unit. Select connection method. For the setting and operation method of connected equipment, refer to the following Website. Wireless Settings http://panasonic.jp/support/global/cs/ This allows the Wireless router and connection settings to (This site is in English only.) be set and the current connection settings and connection state to be checked when a wireless connection is used.

Connection Setting The Wireless router connection wizard will be displayed.

Double Speed Mode Setting (2.4GHz) When a 2.4 GHz wireless format is used, this setting sets the connection speed. ≥ If you connect using the “Double Speed Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or the connection to become unstable.

IP Address/DNS Settings This is for checking the state of the network connection and setting the IP address and DNS-related. Press [OK] to show the respective setting. ≥ “Connection Speed Setting” is enabled only when “Auto Detect Connection Speed” is turned “Off”.

32 VQT3B58 default settings. default “DVD-VideoRatings” and“BD-Video Ratings” etc. to the “Lock”, Settings”, Server “Proxy Settings”, Address/DNS “IP Settings”, “Wireless Mode”, Connection “LAN Language”, formenu, except “Remote Control “On-screen Code”, This returns all valuesinthe Setupmenu and thePlayback Restore Default Settings [BDT215] Start”,“Quick “Touch Aspect”, Sensor” “TV Free Language”, (“On-screen settings. basic You execute can Setting Easy ≥ Speed of startup from power offis increased. StartQuick control. remote to this react products Panasonic other if code control remote the Change Control Remote Code DMP-BDT110_210_VQT3B58_eng.book 33 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 33 DMP-BDT110_210_VQT3B58_eng.book Displays the MAC address of this unit. this of address MAC the Displays Address MAC settings: following the show to [OK] Press ( Settings Remote Device – Idle power consumption will increase. (about the power power the (about increase. will consumption power Idle – occur. will following the “Off” is setting the when to compared so “On” to set is it when powered be will unit control Internal is selected. is can be performed when “Manual” in “Registration equipment Type” displayed the of Registering/deregistering Remote Device List Type Registration connected equipment. the on displayed be to unit this of name the Set Name Unit Setting ≥ Enable to operateby DMC. Remote Device Operation consumption consumption Manual Automatic Others If “On” is selected, “Quick to “On”. Start” is fixed “Quick is selected, If “On”

[BDT210] ) accessing this unit. is that equipment the for individually connection the of permission the Set unit. this accessing is Allowconnection to all the equipment that 39) 25) [BDT310]

Press [OK] to show the following settings: Update ( Firmware module. Display firmware version of this unit and wirelessLAN Information System Video-on-Demand (VOD)content. DivX play and purchase to code registration this You need ( Registration DivX Touch FreeSensor Press [OK] to show the following settings: Update Now necessary. if it update can you and on turned is it when version firmware latest the for check will it Internet, the to connected remains equipment this When Automatic Update Check Adjust the volumeofthe sensor. Level Sound unit. this of part top the above hands your waving by closed and Tray is opened ( Sensor update is is available. update firmware a if manually firmware the You update can 5) [BDT310] 15) 18) [BDT310/210_for_Canada]

[BDT215]

[BDT210] VQT3B58 33

Settings DMP-BDT110_210_VQT3B58_eng.book 34 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Reference Troubleshooting guide General operation Before requesting service, please perform the following steps. To return to the factory preset. ¾ Select “Yes” in “Restore Default Settings” in the Setup Do you have the latest firmware installed? menu. ( 33) Firmware updates may be released to correct operating irregularities that are discovered with certain movies. To return all settings to the factory preset. ( 15) ¾ Reset the unit as follows: 4 1 While the unit is off, press and hold [OK], [B] and [Y] on Make the following checks and visit our the remote control at the same time for more than website for more information. 5 seconds. For USA : – “00 RET” is displayed on the unit’s display. www.panasonic.com/help 2 Repeatedly press [1] (right) on the remote control or Enter the model number. [POWER Í/I] on the unit until “08 FIN” is displayed on For Canada : the unit’s display. http://www.panasonic.ca 3 Press and hold [OK] on the remote control or [< OPEN/ 4 CLOSE] on the unit for at least 3 seconds. Or visit our website to find a service center. This unit is turned off when the input for the You can find a service center near you easily on our TV is switched. website. ¾ This is a normal phenomenon when using VIERA Link Other support information: (HDAVI Control 4 or later). For details please read the “Customer Services Directory (United States and Puerto operating instructions for the TV. Rico)” ( 41) or “Limited Warranty (Only for CANADA)” ( 42). The remote control doesn’t work properly. ¾ Change the batteries in the remote control. ( 4) ¾ The remote control and main unit are using different The following do not indicate a problem with this unit: codes. If “SET ” is displayed on the unit’s display when – Regular disc rotating sounds. a button is pressed on the remote control, change the – Image disturbance during search. code on the remote control. ( 33) – Image disturbance when replacing 3D discs. The TV tuner mode is not displayed when the TV is switched on. ∫ Unit doesn’t respond to remote ¾ This phenomenon may occur, depending on the TV control or front panel buttons. setting, when “Quick Start” is set to “On”. – Depending on the TV, this phenomenon may be prevented Press and hold [POWER Í/I] on the main unit for by reconnecting the HDMI cable to a different HDMI input 3 seconds. terminal or by changing the HDMI auto connection setting. – If still unable to power the unit off, disconnect the power cord, wait 1 minute, then reconnect the power cord. You have forgotten your ratings password. You want to cancel the ratings level. ¾ The ratings level returns to the factory preset. ∫ Cannot eject disc. 1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than The unit may have a problem. 5 seconds. 1 While the unit is off, press and hold [OK], [B] and [Y] on – “00 RET” is displayed on the unit’s display. the remote control at the same time for more than 2 Repeatedly press [1] (right) on the remote control or 5 seconds. [POWER Í/I] on the unit until “03 VL” is displayed on – “00 RET” is displayed on the unit’s display. the unit’s display. 2 Repeatedly press [1] (right) on the remote control or 3 Press [OK] on the remote control or [< OPEN/CLOSE] [POWER Í/I] on the unit until “06 FTO” is displayed on on the unit. the unit’s display. 3 Press [OK] on the remote control or [< OPEN/CLOSE] on the unit.

34 VQT3B58 – When Dolby Digital Plus, Dolby TrueHD, Dolby When Plus, Digital Dolby DTS-HD and – 3 2 1 ¾ high-definition. in output not is Video ¾ ¾ Video isnot output. ¾ ¾ is Picture distorted. television. the on appear donot unit this from images The ¾ ¾ ¾ ¾ ¾ ¾ correctly.connection This unit does not recognize the USB DMP-BDT110_210_VQT3B58_eng.book 35 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 35 DMP-BDT110_210_VQT3B58_eng.book DefaultSettings” and make proper settings.( “Yes”“Restore in select bitstream, in output not are audio Setthe item again. ( seconds. 3 least at for unit the on CLOSE] recognizedby this unit. not are properly. ( properly. set is menu Setup the in Resolution” “HDMI that Confirm “V.OFF”. ( to set is Mode” Output “HDMI(SUB) the when output not [BDT310] [BDT310] when playing 3D discs. ( select“2D Playback” in the setupscreen displayed and menu, Setup the in play” before “Set select unit, this disc from the After removing method. connection the on depending output be not may images “Automatic”, to When “3D BD-Video Playback” in the Setup menu is set [ or control remote the on [OK] hold and Press the unit’s display. [POWER [ press Repeatedly display. unit’s the on displayed is RET” “00 – seconds. 5 than more for time same the at control remote the on [Y] and [B] [OK], hold and press on, is unit the While as follows: the setting Reset Resolution”. “HDMI in selected is resolution incorrect An unit. this by recognized be not will they simultaneously, are connected HDD and USB memory USB two If HDD. with the is supplied that cable If you connect USB HDD tothis unit, use USB extension DY-WL10 (optional) other thanthe supplied with theWireless LAN Adaptor USB devices connected using aUSBextension cable off and on again. not recognize the connection, turn the power of this unit Disconnect and reconnectthe USB cable. If it still does [BDT310] device. recognized.be Press[HOME] and reconnectUSB not will connection the communication video a in or disc a playing while unit this to connected is device USB If terminal. ( OUT VIDEO the use to “Off” to menu Playback the Picture

recognized via the rear USB port of this unit. : Video from the HDMI AV OUT SUB terminal is is terminal AV SUB OUT HDMI the from :Video [BDT215] [BDT215] /I] on the unit until “04 PRG” is displayed on on displayed is PRG” “04 until unit the on Í/I] 31) 31) 28)

[BDT210] [BDT210] 1 [BDT110] (right) on the remote control] or 31) : : Set : “High ClaritySound” in

29) USB memory and USB HDD HDD USB and memory USB ora USB hub may notbe 33) < OPEN/ The aspect is aspect of theratio abnormal. screen The of the screen. edge around the is band A black displayed ¾ on discs. recorded captions closed overlap subtitles The ¾ No subtitles. ¾ ¾ 2D. as correctly output not is video 3D ¾ ¾ ¾ ¾ output. not is video 3D ¾ [BDT310] Thereis nosound comingout from the TV. ¾ ¾ ¾ type. the desired audio hear Cannot ¾ audio. switch Cannot ¾ ¾ set the “HDMI(SUB) Output Mode” to “V.OFF”. ( “V.OFF”. to Mode” Output “HDMI(SUB) the set terminal, SUB AV OUT HDMI the to connected receiver setting on the TV.the on setting Turnoff the subtitles or turn offthe closedcaption cannotdisplayed. be Whenprogressive output ison,closed captions/subtitles played back in accordancewith the settings of the TV. screen structure) and that(2 canbe enjoyed in 3D are side by Side with titles recorded have that Discs ( discs. 3D playing “2D Playback”the in setup screen displayed when Select “Set before play”the in Setup menu, and select unit and TVon? Is the amplifier/receiverthat isconnected between this ( TV correct? the and unit this on settings the Are [BDT310] connected between this unit and aTV? ( amplifier/receiver compatible non-3D a there Is “V.OFF”. ( to Mode” Output “HDMI(SUB) set AV SUB, OUT HDMI an via amplifier/receiver an to and AVMAIN HDMI OUT Mode” toMode” “Normal”. Output “HDMI(SUB) TV, the the set from audio output To amplifier/receiver. the from audio output acase, such ( Mode” Output “HDMI(SUB) and SUB, AVHDMI OUT the to connected is receiver Audio maynot output from theTV when the amplifier/ [BDT310] menu. ( cable, set “HDMI Audio Output” to “On” in the Setup HDMI an with connected device a from To audio output ( settings. Output” Audio “Digital the and connections the Check ( “PCM”. to Output” Audio “Digital Set “Bitstream”. switch the audio if “DigitalAudio Output” isset to cannot you terminal, HDMI an or terminal OPTICAL When connectingan amplifier/receiver usingan television. the on setting aspect the Adjust ( properly. set is Aspect” “TV the Confirm Audio : :

If there is a non-3D compatible amplifier/ compatible a non-3D is there If When connecting this unit to a TV via an an via TV a to unit this connecting When 32) ,30) 9, 9)

( 29) 27) 31) is set to “V.OFF”. In “V.OFF”. In to set is 31) VQT3B58 9) 31) 9) 20) 30) 35

Reference DMP-BDT110_210_VQT3B58_eng.book 36 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Playback Network

Disc cannot be played. I can’t connect to the network. ¾ The disc is dirty. ( 4) ¾ Confirm the network connection and settings. ( 10, 13, 32) Still pictures (JPEG) do not play back ¾ Check the operating instructions for each device and normally. connect accordingly. ¾ The images that were edited on the PC, such as Progressive JPEG, etc., may not play back. When using Wireless LAN connection, video from the DLNA Certified media server is not I can’t play back BD-Live. played back or video frames are dropped during playback. ¾ The SD card is write-protected. ( 7) ¾ Confirm that this unit is connected to the broadband ¾ Higher transfer rate router such as 802.11n (2.4 GHz or Internet. ( 10) 5 GHz) Wireless router may solve the problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless router, it is ¾ Confirm the “BD-Live Internet Access” settings. ( 29) ¾ Confirm an SD Card is inserted into the SD Card slot. necessary to set the encryption type to “AES”. ( 16) Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems. ¾ On the “Wireless Settings” screen ( 32), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your Wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Network Easy Setting” ( 13) again.

36 VQT3B58 ¾ PLAYNo ¾ NET ¾ ONLYHDMI ¾ F99 ¾ security. better for toit change It is recommended performance. low and point security access wireless minimal offer only settings current The ¾ set. not is address IP ¾ $ ¾ inserted. is disc No ¾ ¾ Cannot display onthis unit. ¾ Cannot play. use. and startup during detected television or unit’sdisplay when something unusual is The following messages orservice numbers appearthe on Messages DMP-BDT110_210_VQT3B58_eng.book 37 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 37 DMP-BDT110_210_VQT3B58_eng.book This operation is not This operation available. DVD-Video. ( DVD-Video. or BD-Video a on restriction viewing a is There While connecting to anetwork. SomeBD-Video discs can onlyoutput be with HDMI. The unit fails to operateproperly. Press[POWER video, etc., from DLNA compatible devices. being used. Encryption isrequired when playing back router Wireless the of instructions the to refer details, For reasons. safety for encrypt to recommended is It encryption”. “No to is set type the or encryption system”, to “Open is set LAN Wireless the for type Authentication acquisition if necessary.) address automatic the (Select Gateway”. “Default and Mask”, “Subnet “IP Address”, the Set ---”. ---. ---. “---. is Settings” “IP Address/DNS in Address” “IP The BD-Video: Duringplayback, – reverse slow-motion or example; Someoperations are unsupported bythe unit.For down. upside be may disc The the re-insert card. Confirm “SD” on the unit’s display is not displayed and You tried to play anon-compatibleimage. PAL video, etc.). in recorded (Discs disc incompatible an You inserted standby, then switch back on. to the unit to switch 3 for seconds unit the main on On the television the On On the unit’s display unit’s the On reverse frame-by-frame is not possible. not is frame-by-frame reverse 29) Í /I] /I] theservice numberwhen requesting service. of dealer the Inform dealer. the from service request above, Ifthe service number does not disappear despitedoing the 2 1 ¾ U59 ¾ (“ SET ¾ REMOVE ¾ PLEASE WAIT ¾ No READ ¾ FINISH ¾ (“  UPD ¾ START ¾ ¾ (“ H     the unit. the theunit. Donot block the ventilation hole onthe sideof installing when ventilation good with a position Select about30 minutes until the message disappears. Theunit switches to standby for safetyreasons. Wait for is hot. unit The seconds. 5 sametime for more than the at button number indicated Press and hold[OK] and the codes. Change the codethe on remote control. different using are unit main and control remote The USB the device. TheUSB device is drawing too muchpower. Remove displayed. is WAIT” malfunction. You cannotoperate the unitwhile “PLEASE a not is This process. an internal out carrying is unit The play. cannot unit The scratched. badly or dirty is media The The firmware update is complete. update firmware The unit. off the turn not do Please updated. is being firmware The unit. the off turn not do Please update. firmware the during restarted being is system The on. power the turn to Í/I] [POWER Press seconds, then reconnect it. few a wait outlet, AC the from plug the Disconnect service number doesnot disappear, do the following. Checkthe unit using thetroubleshooting guide. Ifthe unusual. something is There ” stands for a number.) for stands ” ” stands for a number.) for stands ” a number.) for stands ”  or F /   VQT3B58 37

Reference DMP-BDT110_210_VQT3B58_eng.book 38 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Supplemental information ∫ Display languages list Display Language Display Language Display Language ENG English JPN Japanese ARA Arabic FRA French CHI Chinese HIN Hindi DEU German KOR Korean PER Persian ITA Italian MAL Malay IND Indonesian ESP Spanish VIE Vietnamese MRI Maori NLD Dutch THA Thai BUL Bulgarian SVE Swedish POL Polish RUM Romanian NOR Norwegian CES Czech GRE Greek DAN Danish SLK Slovak TUR Turkish POR Portuguese HUN Hungarian Others RUS Russian FIN Finnish

∫ Language code list Language Code Language Code Language Code Abkhazian: 6566 Gujarati: 7185 Rhaeto-Romance: Afar: 6565 Hausa: 7265 8277 Afrikaans: 6570 Hebrew: 7387 Romanian: 8279 Albanian: 8381 Hindi: 7273 Russian: 8285 Amharic: 6577 Hungarian: 7285 Samoan: 8377 Arabic: 6582 Icelandic: 7383 Sanskrit: 8365 Armenian: 7289 Indonesian: 7378 Scots Gaelic: 7168 Assamese: 6583 Interlingua: 7365 Serbian: 8382 Aymara: 6589 Irish: 7165 Serbo-Croatian: 8372 Azerbaijani: 6590 Italian: 7384 Shona: 8378 Bashkir: 6665 Japanese: 7465 Sindhi: 8368 Basque: 6985 Javanese: 7487 Singhalese: 8373 Bengali; Bangla: Kannada: 7578 Slovak: 8375 6678 Kashmiri: 7583 Slovenian: 8376 Bhutani: 6890 Kazakh: 7575 Somali: 8379 Bihari: 6672 Kirghiz: 7589 Spanish: 6983 Breton: 6682 Korean: 7579 Sundanese: 8385 Bulgarian: 6671 Kurdish: 7585 Swahili: 8387 Burmese: 7789 Laotian: 7679 Swedish: 8386 Byelorussian: 6669 Latin: 7665 Tagalog: 8476 Cambodian: 7577 Latvian, Lettish: 7686 Tajik: 8471 Catalan: 6765 Lingala: 7678 Tamil: 8465 Chinese: 9072 Lithuanian: 7684 Tatar: 8484 Corsican: 6779 Macedonian: 7775 Telugu: 8469 Croatian: 7282 Malagasy: 7771 Thai: 8472 Czech: 6783 Malay: 7783 Tibetan: 6679 Danish: 6865 Malayalam: 7776 Tigrinya: 8473 Dutch: 7876 Maltese: 7784 Tonga: 8479 English: 6978 Maori: 7773 Turkish: 8482 Esperanto: 6979 Marathi: 7782 Turkmen: 8475 Estonian: 6984 Moldavian: 7779 Twi: 8487 Faroese: 7079 Mongolian: 7778 Ukrainian: 8575 Fiji: 7074 Nauru: 7865 Urdu: 8582 Finnish: 7073 Nepali: 7869 Uzbek: 8590 French: 7082 Norwegian: 7879 Vietnamese: 8673 Frisian: 7089 Oriya: 7982 Volapük: 8679 Galician: 7176 Pashto, Pushto: 8083 Welsh: 6789 Georgian: 7565 Persian: 7065 Wolof: 8779 German: 6869 Polish: 8076 Xhosa: 8872 Greek: 6976 Portuguese: 8084 Yiddish: 7473 Greenlandic: 7576 Punjabi: 8065 Yo r u b a : 8 9 7 9 Guarani: 7178 Quechua: 8185 Zulu: 9085

38 VQT3B58 [For_U.S.A._and_Canada] Specifications are subjecttochange without notice. k (W Dimensions [For_units_with_PX_printed_on_the_outer_packaging] Class Specification LASER range: temperature Operating system: Signal Specifications Mass (Weight): Mass HDMI AVHDMI output: Digital audio output: audio Digital output: Audio Video output: Video Operating humidity range: WLAN WLAN Ethernet: slot: USB cardslot: SD DMP-BDT110_210_VQT3B58_eng.book 39 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 39 DMP-BDT110_210_VQT3B58_eng.book Power consumption: Power supply: Power Power consumption in quick start standby mode: standby start quick in consumption Power mode: standby start quick in consumption Power Power consumption in standby mode: in standby consumption Power Power consumption: Power supply: Power Power consumption in standby mode: in standby consumption Power Laser power:No hazardous radiation is emitted with the the with emitted is radiation hazardous power:No Laser Wave length: Wave Number of connectors : Security: Access Mode: system: Transmission Standard Compliance: I [BDT310] LASER Product: LASER This unit supports “HDAVI Control 5” function. 5” Control “HDAVI supports unit This ( IEEE802.11b / /IEEE802.11g IEEE802.11a / IEEE802.11n This unit supports WPA WPA2 encryption.) and supports unit This

[BDT215]

[BDT215]

[BDT215] D 790nm(CDs)/655 nm (DVDs)/405 nm (BDs) k Optical digital output (Optical terminal) (Optical output digital Optical

(Approx. 16 16 (Approx. 15/16 [BDT215] H) Including the projecting parts: projecting the Including H) i 10 %to 80% (no RH condensation) 0AET10AET system : 1 10BASE-T/100BASE-TX Type (19 A pin) [BDT310] 5

. Vp-p (75 1.0 [BDT210]

[BDT210]

C to oC to AC110 to V240 V, 50 Hz/60 Hz [BDT210] OFDM system, DSSS system rs( H,0d)Pnjack dB)/Pin kHz, 0 Vrms (1 2

[BDT210] 430 mm i 35

Approx. 1.6 k [BDT310] [BDT110] WPA2-PSK (TKIP/AES)

[BDT110] [BDT310] WPA-PSK (TKIP/AES) oC ( E 6 i 2 bit) /128 bit (64 WEP onco system :1 Connector ≠

Infrastructure mode Infrastructure hne: system channel:1 2 zk [BDT110] )/Pinjack:1system k USB2.0 : USB2.0 i 185 mm 185 7 5/16 AC 120 V, 60Hz 41 41 safety protection safety

Approx. 3.5 W 3.5 Approx. W 0.2 Approx. W 3.2 Approx. W 0.1 Approx. Approx. Approx.

Approx. 13 W Approx. 9.9 W Approx. 13 W o F to g :2system :2 :1system :1 zk (3.52 lbs)

2system k i 1 7/16 z) 35 mm 35 NTSC 95 95 4.1 oF) W *3 *2 *1 ≥ ( unit. the on settings the and amplifier/receiver, the to connected are terminals which on depending differs output audio The ≥ [BDT310/210_for_Canada] OPTICAL HDMI AV Terminal the DTS, Inc. specifications. The audio is output 5.1ch from amplified toor 6.1ch 7.1ch depending on [BDT110] PCM. or 5.1ch Surround Digital Digital, DTS Dolby as output When “BD-Video Audio”isSecondary set to “On”, the audio will be receiver compatible withthe respective audio format. number of output channels output of number The number of channels listed is the maximumpossible play order may differ orplayback maynot be possible. the structures, folder and states recording certain With PCM. File format OUT File format File Audio information JPEG MKV DivX MP3 30, Digital Audio Output) Audio Digital 30, maximum : The numberpossible of Dolby is 5.1ch sound audio original using Outputs DTS Digital Surround Dolby Digital/ “.TXT”, “.txt” “.TXT”, “.sub”, “.SUB”, “.srt”, “.SRT”, file text Subtitles “.AVI”, “.avi” “.divx”, “.DIVX”, “.JPG”, “.jpg” “.JPG”, “.MP3”, “.mp3” “.MP3”, “.ASS”, “.ass” “.ASS”, “.ssa”, “.SSA”, “.srt”, “.SRT”, file text Subtitles “.mkv” “.MKV”, “Bitstream” *1 Extension “Digital Audio Output” Audio “Digital

when connected to amplifier/ ≥ ≥ ≥ ≥ the names of artists) and titles (Only tags ID3 frame rate condition. video resolution and on the depending back, played be not may file MKV and DivX Some the file extensions. for except same the andthe file names are folder, same the inside are file text subtitles and file video The device. other or aPC on name file the or structure have edited the folder you if file the back play to able be not You may supported not is JPEG Progressive and JPEG MOTION PCM 2ch Down-mixed 5.1ch PCM 5.1ch DVD-Video : PCM 7.1ch : BD-Video Reference “PCM” VQT3B58 *1*2*3 39

Reference DMP-BDT110_210_VQT3B58_eng.book 40 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Java and all Java-based trademarks and logos are trademarks or Windows is a trademark or a registered trademark of Microsoft registered trademarks of Sun Microsystems, Inc. in the United States Corporation in the United States and other countries. and other countries.

Manufactured under license from Dolby Laboratories. YouTube and Picasa are trademarks of Google, Inc. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Skype, associated trade marks and logos and the “ ” logo are trade marks of Skype Limited.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents This product incorporates the following software: issued & pending. (1) the software developed independently by or for Panasonic DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Corporation, Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. (2) the software owned by third party and licensed to Panasonic Product includes software. Corporation, © DTS, Inc. All Rights Reserved. (3) the software licensed under the GNU General Public License, Version 2 (GPL v2), (4) the software licensed under the GNU LESSER General Public This item incorporates copy protection technology that is protected by License, Version 2.1 (LGPL v2.1) and/or, U.S. patents and other intellectual property rights of Rovi Corporation. (5) open sourced software other than the software licensed under the Reverse engineering and disassembly are prohibited. GPL v2 and/or LGPL v2.1 For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at HDMI, the HDMI Logo, and High-Definition Multimedia Interface are http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://www.am-linux.jp/dl/AWBPP11 This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use The GPL/LGPL software is distributed in the hope that it will be useful, of a consumer to (i) encode video in compliance with the AVC Standard but WITHOUT ANY WARRANTY, without even the implied warranty of and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider At least three (3) years from delivery of products, Panasonic will give to licensed to provide AVC/VC-1 Video. No license is granted or shall be any third party who contacts us at the contact information provided implied for any other use. Additional information may be obtained from below, for a charge no more than our cost of physically performing MPEG LA, LLC. source code distribution, a complete machine-readable copy of the See http://www.mpegla.com. corresponding source code covered under GPL v2/LGPL v2.1.

Contact Information [email protected] HDAVI Control™ is a trademark of Panasonic Corporation. Source code is also freely available to you and any other member of the public via our website below. http://www.am-linux.jp/dl/AWBPP11 VIERA Link™ is a trademark of Panasonic Corporation. For the software categorized as (5) includes as follows. 1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. VIERA CAST™ is a trademark of Panasonic Corporation. (http://www.openssl.org/) 2. This product includes software developed by the University of EZ Sync™ is a trademark of Panasonic Corporation. California, Berkeley and its contributors. 3. FreeType code. 4. The Independent JPEG Group's JPEG software. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. gSOAP Public License 1.3 “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved. SDXC Logo is a trademark of SD-3C, LLC. THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, DivX®, DivX Certified® and associated logos are trademarks of DivX, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT Inc. and are used under license. (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service POSSIBILITY OF SUCH DAMAGE. marks, or certification marks of the Digital Living Network Alliance.

40 VQT3B58 modification, introduction of sand, humidity or liquids, commercial use use commercial liquids, or humidity sand, of introduction modification, damage, lightning surge, line power maintenance, improper controls, consumer of misadjustment adjustments, set-up installation, faulty alteration, misapplication, mishandling, neglect, abuse, misuse, accidents, from result which warrantor, failures or the by supplied not products by caused are which failures or shipment, in occurred which damages COVER NOT DOES ALSO The warranty damage. cosmetic or andtear wear normal COVER NOT DOES and workmanship, or materials in todefects due ONLY failures warranty COVERS This Limited Warranty Limits And Exclusions PURCHASE. PROOF OF SUCH WITHOUT RECEIVED FOR THE REPAIR BEUNIT CHARGED CUSTOMER ANY WILL OF PAID AMOUNT PURCHASE.PURCHASE, OF ANDPLACE PURCHASE INDICATING OF RECEIPT/PROOF DATE OF ASALES REQUIRED TO BEFURNISH WILL PURCHASER www.panasonic.com/BatteryHandling at Web Site our visit please batteries Ion Lithium shipping When carton. original the in preferably and insured adequately prepaid, it send and accessories, all include pack, carefully unit, the shipping When to: prepaid theproduct ship please repairs, in obtaining Rico Puerto and U.S.A. the in assistance For Service Mail-In is”. “as not sold was which product ofanew purchaser original tothe only extended is warranty This Rico. States Puerto or United the in andserviced purchased toproducts applies only warranty This (cabinet). parts cosmetic and antennas, batteries, non-rechargeable for labor and parts both excludes Warranty Limited This parts. for charge be no will there period, warranty “Parts” the During labor. for nocharge be will there period warranty “Labor” the During thewarrantor. by be made will refund or repair, replace to decision The price. purchase your refund (c) or product, value equivalent arefurbished or anew with it replace (b) parts, refurbished or new with product your repair (a) either option atits period”), (“warranty purchase oforiginal thedate with starts below, which chart the on indicated period of the thelength for will, warrantor”) as “the to (referred Company Electronics Consumer Panasonic workmanship, or materials in of adefect because properly notwork does product your If Only) Rico USA Puerto (For and Warranty Coverage Limited 07094 Jersey New Way,Secaucus, Panasonic One America North of Corporation Panasonic of Division Company, Electronics Consumer Panasonic Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY REPAIR THEIF THE DURING PERIOD, NEEDED IS Warranty. Limited the under required is receipt registered valid A reached. be can you where number phone daytime a provide and address areturn complaint, the detailing a letter Include information. up to date the most providing DMP-BDT110_210_VQT3B58_eng.book 41 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 41 DMP-BDT110_210_VQT3B58_eng.book MODEL NUMBER reference. future for keep and below provided space the in notethem Please unit. ofthe bottom the or back the on either be found can product this of number and serial number model The exchange) (defective DVD-RAM Disc (pack), Batteries Rechargeable SERIAL NUMBER NUMBER SERIAL rdc rPr aePrsLabor Recorder DVD year 1 year 1 Player DVD Portable Player,DVD Parts System Theater Home Blu-ray Blu-ray Disc Player Player, Portable Disc Blu-ray Product or Part Name [email protected] TX 78503 McAllen, Suite B 4900 George McVay Drive Center Exchange Panasonic Panasonic Blu-ray and DVD Products Limited Warranty Limited Products DVD and Blu-ray Panasonic

1 year 1 0dy Not days 10 1 year 1 as Panasonic is committed to is committed as Panasonic (ONLY FOR U.S.A. AND PUERTO (ONLY AND RICO) U.S.A. FOR

90 days 90 90 days 1 year Applicable 90 days UNDER “LIMITED WARRANTY “LIMITED UNDER COVERAGE WARRANTIES NO LISTED EXPRESS ARE EXCEPT AS THERE God. of acts to attributable thatis Servicer, damage or Authorized other or Center Service a Factory than other anyone by service or product, the of use rental or business other or restaurant, office, hotel, as such LIMITED WARRANTY,LIMITED RESPONSIBILITY.YOUR ARE PARTSBY THIS NOT WHICH COVERED ANDSERVICE,ARE the warrantor. for listed addresses atthe Department Affairs Consumer thewarrantor’s to write then satisfaction, toyour handled not is problem Center. Ifthe Service or dealer your contact may you period, thewarranty after or during develops product with this Ifaproblem state. state to from vary which rights other have also may you and rights legal specific you gives warranty This you. to apply not may exclusions so the lasts, warranty implied an long how on limitations or damages, consequential or ofincidental limitation or exclusion the allow donot states Some THE LIMITED WARRANTY. OF PERIOD WARRANTYOF MERCHANTABILITY, TO THE ARE LIMITED WARRANTIES, THE ANDIMPLIED INCLUDING EXPRESS ALL illustration only.) butfor notexclusive, are listed items The content. recorded or memory other dataor images, or tomedia damage or of servicer, loss the from toand travel time, lost for damages excludes this examples, (As WARRANTY. THIS OF ANY BREACH OF OUT PRODUCT, OR ARISING OF USE THIS THE FROM RESULTING DAMAGES CONSEQUENTIAL OR INCIDENTAL FOR WARRANTOR NOT LIABLE IS THE User memo: TELEPHONE NUMBERTELEPHONE DEALER ADDRESS DEALER NAME DATE OF PURCHASE Accessory Purchases (United Statesand Puerto Rico) Rico) Puerto and States (United Directory Services Customer and Personal Checks) and Personal Express, American Card, Discover Visa, MasterCard, accept (We WA 98032 Kent, South, Avenue 84th 20421 Technology and Company Service Panasonic EST) 9am-9pm (Monday-Friday Only) (Fax 1-800-237-9080 (Phone) 1-800-332-5368 at: directly You us contact also may [email protected] to: E-mail by request Or, your send http://www.pstc.panasonic.com at: Web Site our visiting by Products Panasonic all for online Books andInstruction Accessories Parts, Purchase Saturday-Sunday 10am-7pm EST 10am-7pm Saturday-Sunday 9am-9pm, Monday-Friday 1-800-211-PANA (7262) at: directly us contact also You may http://www.panasonic.com/contactinfo at: web via the or, contact us http://www.panasonic.com/help Literature requests by visiting our Web Site at: and Service Customer make or Accessories; and Parts purchase Center; Service or Dealer nearest your locate Assistance; Operating and Information Obtain Product 1-866-605-1277 TTY: users, TTY impaired speech or hearing For 1-877-833-8855 For hearing or speech impairedTTY users, TTY: As of December 2010 of December As ” .

VQT3B58

41

Reference DMP-BDT110_210_VQT3B58_eng.book 42 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Limited Warranty (Only for CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT - LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.

Technics Audio Product - One (1) year, parts and labour Panasonic BD/DVD Product - One (1) year, parts and labour Panasonic Audio Receivers - One (1) year, parts and labour Home Theater Systems Product - One (1) year, parts and labour

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.

Dry cell batteries are also excluded from coverage under this warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

WARRANTY SERVICE For product operation and information assistance, please contact: PRODUCT OPERATION ASSISTANCE Customer Care Centre: Telephone #: 1-800-561-5505 Fax #: (905) 238-2360 Email link: “Support # contact us # email” on www.panasonic.ca PRODUCT REPAIRS Please locate your nearest Authorized Servicentre. Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca

IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of original purchase.

42 VQT3B58 AMERA UNICATION desenchúfela de la toma de corriente. de toma la de desenchúfela cuando no vayautilizara la unidad durantemucho tiempo, rápidoDesactivado, : aprox. 0,1 W). Paraahorrar energía aunque esté ajustada en el modo de espera (Accionamiento Estaunidad consume una pequeña cantidad deenergía de energía Ahorro ≥ doméstica decorriente toma A una [Para EE.UU. yCanadá] español en rápida Referencia DMP-BDT110_210_VQT3B58_eng.book 43 ページ ２０１１年５月１７日 火曜日 午後４時４３分 ページ 43 DMP-BDT110_210_VQT3B58_eng.book Conéctelo cuando haya realizado el resto deconexiones. resto el realizado haya cuando Conéctelo VIDEO OUT COMMUNICATION CAMERA Conexiones básicas Conexiones 10BASE-T/100BASE-TX COMMUNICATION receptor compatible con HDMI amplificador/ aun y HDMI con compatible televisor un a Conexión un cableparaaudio/vídeo untelevisorcon Conexión a compatible conHDMI untelevisor Conexión a alimentación de CA por último CA por alimentación de cable de Conecte el CAMERA LAN 10BASE-T/100BASE-TX (incluido) CA de alimentación de Cable Altavoces multicanal Altavoces VOT MI AVOUTSUB AV OUTMAIN LAN TX VOT MI AVOUTSUB AV OUTMAIN VOT MI AVOUT AV OUTMAIN COMMUNICATION RL TX CAMERA AUDIO OUT RL VOT MI AVOUT AV OUTMAIN AUDIO OUT VIDEO OUT (incluido :DMP-BDT215) (incluido Cable HDMI COMMUNICATION HDMI IN VIDEO OUT CAMERA (ARC) (Spanish Reference) Quick 10 (incluido :DMP-BDT215) (incluido Cable HDMI Cable HDMI AUDIO IN RL HDMI IN VIDEO IN AC IN Amplificador/Receptor Cable de audio/vídeo de Cable HDMI OUT HDMI IN (ARC) COMMUNICATION CAMERA RL AUDIO OUT V Pulse Pulse reproducción la de reanudación de Función La posiciónde detención se memoriza. ≥ posición. Pulse [ Pulse [ Pulse 2 1 adecuadaen el televisor. vídeo de entrada la seleccione y televisor el Encienda Preparación Durante la reproducción, pulse [SEARCH pulse reproducción, la Durante Búsqueda ≥ Pulse [ Pulse ≥ Durante la pausa, pulse [SEARCH pausa, la pulse Durante Cámara lenta ≥ [SEARCH ≥ reproducir. desee que pista o capítulo título, el hasta Salta [9 Durante la reproducción o la pausa, pulse [ pulse pausa, la o reproducción la Durante ≥ La velocidad aumentahasta 5pasos. ≥ [ pulsa se o bandeja la abre se si borra se posición La Pulse [ Pulse reproducción. de reanudación de la reproducción no funciona. no reproducción la de reanudación de la función BD-J, los incluidos BD-Video discos En los unidad. la de [SEARCH paso. un en fija está velocidad La MP3: y Música Cada pulsación aumenta el númerosaltos. de reproducción normal. [ Pulse BD-Video AVCHD y ∫ Inserte el medio. el Inserte [ Pulse configuración básica. configuración la de pantalla la aparecerá encendido, de botón Despuésde conectar su nuevo reprodutor ypulsar el unidad. STOP] varias vecespara visualizar “STOP”en el visor Reproducción básica Reproducción ]. Parada Inicia lareproducción Salto lentaBúsqueda/Cámara Pausa [ 1 ∫ 1PLAY]. ;PAUSE]. ; PLAY] para reiniciar la reproducción desde esta esta desde reproducción PLAY] la reiniciar para PLAY] para recuperar la velocidad de de velocidad la recuperar para 1PLAY] STOP]. PAUSE][ o vez otra 5 5 Í ]. ]. POWER] para la POWER] encender : Sólo dirección en avance 1 PLAY] para reiniciar la 6 ] o [SEARCH 6 : VQT3B58 ] o ] o 5 43 ].

Reference DMP-BDT110_210_VQT3B58_eng.book 44 ページ ２０１１年５月１７日 火曜日 午後４時４３分

Index

A Audio MMedia Renderer...... 25 24p...... 28, 31 Changing audio ...... 17 NNetwork 3D...... 20 Language ...... 27, 29 Connection ...... 10 B BD-Live ...... 19 Setting ...... 13, 32 C Chapter ...... 18 P Playlists ...... 18 D DivX ...... 18, 39 Pop-up menu ...... 17 DLNA ...... 24 Q Quick Start ...... 33 F File format...... 39 R Re-master...... 28 Firmware update ...... 15 Restore Default Settings . . . . . 33 L LAN ...... 10 Resume play function...... 17 Language S Subtitle ...... 27 Audio ...... 27, 29 U USB device ...... 7 Menu ...... 29 V VIERA CASTTM ...... 23 On-screen...... 31 TM Soundtrack ...... 27 VIERA Link Subtitle ...... 27, 29 “HDAVI ControlTM” ...... 26 W Wireless LAN ...... 10

USA Only: Disposal may be regulated in your community due to Environmental considerations. For disposal or recycling information, please visit Panasonic Website: http://www.panasonic.com/environmental or call 1-888-769-0149.

® Information on Disposal in other Countries outside As an ENERGY STAR Partner, Panasonic has determined that this product meets the the European Union ENERGY STAR ® guidelines for energy This symbol is only valid in the European efficiency. Union. For Canada only: The word “Participant” is If you wish to discard this product, please used in place of the word “Partner”. contact your local authorities or dealer and ask for the correct method of disposal.

[For_U.S.A._and_Puerto_Rico] [For_Canada] [For_units_with_PX_printed_on_the_outer_packaging]pr Panasonic Consumer Electronics Panasonic Canada Inc. Panasonic Corporation Company, Division of Panasonic 5770 Ambler Drive Corporate Management Corporation of North America Mississauga, Ontario Division For North America One Panasonic Way, Secaucus, L4W 2T3 Sales Team New Jersey 07094 www.panasonic.ca 1-61, Shiromi 2-Chome, Chuo-ku, Osaka http://www.panasonic.com City 540-6255, Japan

C Panasonic Corporation 2010 VQT3B58-2 Printed in China F1210SK2051