DOCSLIB.ORG

Construction Chemicals

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Construction Chemicals EURO ACCESSORIES CONSTRUCTION CHEMICALS Quality Products from Adomast Manufacturing Adomast Manufacturing Ltd, have been creating specialist products for the construction industry for a number of years and have built a solid reputation for supplying high quality products at supremely competitive prices. Adomast offer a comprehensive range of products and are constantly updating old technology with the latest scientific knowledge, focusing on an increasingly environmentally conscious industry without compromising performance or quality. Adomast Manufacturing Ltd is an ISO9001 Quality Assured Company. Available Volumes & Weights 300ml 1L 5L 1L 1.2kg 5kg 8kg 25kg 5L 20kg 25kg 20L Whenever you see the following symbols the product is: Water Regulations Environmentally ECO WRAS Advisory Scheme Friendly Approved 25L IBC SAFE Safe Non-Hazardous CE CE Approved 205L EURO 2 ACCESSORIES www.euroacc.co.uk CONSTRUCTION CHEMICALS Contents Page 4 Mould Release Agents & Formwork Treatments Page 9 Admixtures Page 12 Concrete Curing Agents & Retarders Page 16 Resin Flooring, Sealing & Dustproofing Page 18 Screeding Page 22 Construction Repair Mortars Page 28 Cleaners & Maintenance Products Page 31 Resin Repair & Adhesives Page 33 Waterproofing & Roofing Page 38 Complementary Products We are here to make sure all your concrete & f o r m w o r k t r e a t m e n t needs are fulfilled to the highest quality Mould Release Agents & Formwork Treatments Adolease Adostrip General Purpose Mould Release Oil General Purpose Mould Release Oil Adolease is designed for everyday site use. Designed for everyday site use, Adostrip is a highly efficient It is a low viscosity, readily applied mineral oil based mould yet cost effective mould release agent, offering excellent release agent. coverage rates. Designed to give reliable high performance with all types of It forms a physical barrier between the formwork and the formwork. concrete giving a quick, clean and easy release with minimum blowhole formation and providing a sharp, uniform and Adolease forms a physical barrier between the formwork non-stained concrete surface. and the concrete giving a quick, clean and easy release with minimum blowhole formation & providing a sharp, uniform and non-stained concrete surface. Available Sizes: Available Sizes: 5L 20L 25L 205L IBC 5L 20L 25L 205L IBC Coverage: 30-40m per litre Coverage: 40-50m per litre Adostrip DC Adostrike Mould Release Agent for DRY CASTING Processes High Oil Content Solvent Based Mould Oil Adostrip DC is a blend of the latest surfactant chemistry, Designed for general site and precast use, Adostrike is a higher blended with traditional release oil technology to create a concentration of mould release chemicals blended together to release agent specifically designed for dry casting operations. achieve the highest quality concrete finish. The surfactant blend present within the formulation reduces Adostrike is a premium quality mould oil that offers excellent the surface tension between the concrete and the formwork release characteristics. face allowing a quick, clean and easy release with minimum It has low sag qualities which allows application long in blowhole formation and providing a sharp, uniform and advance of casting without loss in release performance or non-stained concrete surface. quality of finish. Suitable for use on all types of formwork. Suitable for use on all types of formwork, even on sealed or unsealed timber in all climatic conditions. It is highly resistant to removal by rain showers or foot traffic. Available Sizes: Available Sizes: 5L 20L 25L 205L IBC 5L 20L 25L 205L IBC Coverage: 30-40m per litre Coverage: 30-40m per litre EURO 4 ACCESS O RIES www.euroacc.co.uk Safelease Safestrike XL Mould Release Emulsion Fully Biodegradable Mould Release Emulsion Developed using the latest water soluble polymer technology, Developed to produce a ready to use and stable vegetable oil to produce an environmentally friendly and highly effective based mould release emulsion, that is particularly suited to mould release agent for general site use. use on steel and other impervious formwork materials. A low odour, low VOC, non-staining mould release agent Safestrike XL is a safe, environmentally friendly, readily designed with minimum blowhole formation and providing a biodegradable and non-staining product that facilitates easy sharp, uniform and non-stained concrete surface. formwork release. It is particularly suited for white or fair faced concrete finishes. A low odour, low VOC mould release agent designed with minimum blowhole formation and providing a sharp, uniform and non-stained concrete surface. Particularly suited for white or fair faced concrete finishes. Available Sizes: Certified: Available Sizes: Certified: 5L 20L 25L 205L IBC 5L 20L 25L 205L IBC Coverage: 30-40m per litre Coverage: 30-40m per litre Safestrike Naturol CR2 Maximum Concentration, Mould Release Agent High Concentration, Mould Release Agent Safestrike is a blend of natural vegetable oils designed for Naturol CR2 is a blend of natural vegetable oils designed for general site and precast use. general site and precast use. A high concentration release oil that is easily applied and is A high concentration release oil that is easily applied and suitable for all types of formwork, even on sealed or unsealed suitable for all types of formwork, even on sealed or unsealed timber in all climatic conditions. timber in all climatic conditions. Highly resistant to removal by rain showers or foot traffic. Highly resistant to removal by rain showers or foot traffic. It is particularly suited for white or fair faced concrete finishes. It is particularly suited for white or fair faced concrete finishes. Safestrike is a safe, environmentally friendly, readily Naturol CR2 is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy biodegradable and non-staining product that facilitates easy formwork release. formwork release. Suitable for indoor and outdoor use. Available Sizes: Certified: Available Sizes: Certified: 5L 20L 25L 205L IBC 5L 20L 25L 205L IBC Coverage: 30-40m per litre Coverage: 30-40m per litre Mould Release Agents & Formwork Treatments Extracon Bio Plastrip S Fully Biodegradable Mould Release Agent Maximum Concentration, Low-Medium Viscosity, A low viscosity blend of natural vegetable oils designed for Mould Release Oil general site and precast use. Plastrip S is a chemical release agent specifically formulated Easily applied and suitable for both indoor and outdoor use to give easy release of plastic and thermoplastic mould liners, and can be used on all types of formwork. providing a high quality surface finish, but is suitable for all types of formwork. It is particularly suited for white or fair faced concrete finishes. It is easily applied and may be applied to formwork Extracon Bio is a safe, environmentally friendly, readily immediately prior to casting without reducing the finished biodegradable and non-staining product that facilitates easy quality. formwork release giving a very high quality surface finish. Plastrip S will also offer corrosion protection to any metal surface. Available Sizes: Certified: Available Sizes: Certified: 5L 20L 25L 205L IBC 5L20L25L 205L IBC Coverage: 30-40m per litre Coverage: 30-40m per litre Extracon DS Extracon XS High Concentration, High Performance Mould Fast Drying Mould Release Agent Release Agent Designed for everyday site use, and on all types of formwork. Extracon DS is a chemical release agent designed for general Extracon XS is a highly efficient yet cost effective mould site and precast use. release agent, offering excellent coverage rates. A high concentration release oil that is easily applied and Forming a physical barrier between the formwork and the suitable for all types of formwork, even on sealed or unsealed concrete giving a quick, clean and easy release, with minimum timber in all climatic conditions. blowhole formation and providing a sharp, uniform and non- Highly resistant to removal by rain showers or foot traffic. stained concrete surface. It is particularly suited for white or fair faced concrete finishes. It is easily applied and may be applied to formwork Extracon DS is a safe, non-staining release oil that facilitates immediately prior to casting without reducing the finished easy formwork release. Extracon DS is suitable for indoor and quality due to its fast drying capability. outdoor use. Available Sizes: Certified: Available Sizes: 5L 20L 25L 205L IBC 5L 20L 25L 205L IBC Coverage: 30-40m per litre Coverage: 30-40m per litre EURO 6 ACCESS O RIES www.euroacc.co.uk Adoseal Adowax Polyurethane Based Formwork Face / Surface Sealer Ready to Use, Brushable Wax Protective Coating Adoseal is a low viscosity, low VOC, easy to use high solids, & Mould Release Agent single pack moisture cured polyurethane coating. Adowax is a blend of mould release oil and specially selected Designed to impart a high quality, fully impervious surface temperature resistant waxes. lacquer finish to formwork and other porous surfaces. This helps with the initial seal of porous formwork and can be used This tough flexible sealing coating increases formwork life as a mould release agent where the use of liquid release oil is not considerably. It improves concrete appearance by preventing practical. staining from wood faced formwork. It is easy to apply and helps waterproof and protect formwork in It also improves formwork release and helps cut back on all climatic conditions and when not in use. formwork
Load more

Recommended publications
  • Best Practice Guidelines for Selecting Concrete Bridge Deck Sealers
    BEST PRACTICE GUIDELINES FOR SELECTING CONCRETE BRIDGE DECK SEALERS GENERAL Penetrating sealers are used on highway Portland Cement Concrete bridge decks to reduce the rate of chloride attack on the reinforcing steel corrosion thereby extending service life and reducing life-cycle structure costs of the bridge deck (preventative maintenance). By applying penetrating sealers to existing concrete surfaces, the permeability of the concrete is reduced by up to one order of magnitude. The permeability of the concrete is one of the most important factors which will effect the rate of deterioration of rebar corrosion, alkali-aggregate reaction, carbonation, and the effects of freeze-thaw cycles of which all could occur at the same time. HISTORY Concrete sealing has a long history in Alberta; in the 1960’s boiled linseed oil was used for maintenance of existing bridge curbs. Epoxies and other types of sealers were also tried in the 60’s. The first epoxy-wearing surface in Alberta was in 1963 at Morley. Dehydratine, a black tarry substance, was routinely used on abutments, since the late 1960’s. Epoxy and acrylic sealers were routinely used on standard precast girders starting in the middle of 1970’s. Penetrating Silane sealers were first used in Alberta on concrete bridge decks in 1986. CONCRETE PROPERTIES • Concrete is a conglomerate of sand and rock glued together by cement paste (hydrated cement – cement reacted with water to form calcium silicate chemical bonds). • Concrete is a synergistic material; the whole has greater structural properties
    [Show full text]
  • General Product Catalogue
    Solutions In Concrete Construction GENERAL PRODUCT CATALOGUE Other Available Catalogues • Concrete Forming Systems • Bridge Deck Forming and Hanging Systems • Precast Concrete Products • Concrete Anchoring Systems • Rock Anchoring and Bolt Systems www.nca.ca Call Us Toll Free: 1-888-777-9272 LOCATIONS Alberta Western Division Calgary Edmonton Red Deer 14760 - 116th Avenue NW 3834 54th Avenue S. E. 14760 - 116th Avenue NW #5, 7803 - 50 Avenue With over 45 years of experience, National Concrete Accessories (NCA), is Canada’s Edmonton, AB T5M3G1 Calgary, AB T2C2K9 Edmonton, AB T5M3G1 Red Deer, AB T4P1M8 leading manufacturer and distributor of concrete accessories. With 14 branches across Tel: (780) 451-1212 Tel: (403) 279-7089 Tel: (780) 451-1212 Tel: (403) 342-0210 Canada, including manufacturing plants in Toronto and Edmonton, we are your one-stop Fax: (780) 455-0827 Fax: (403) 279-4397 Fax: (780) 455-0827 Fax: (403) 341-3245 shop for concrete form hardware, accessories and construction products. Specializing in product variety, quality and superior service, we distribute a complete line of construction British Columbia and restoration products, including tools & equipment, decorative concrete, and building envelope products. NCA works in partnership with premium brands such as, Acrow- Burnaby Kamloops Kelowna Prince George Richmond, DOW, Sika, Makita, W.R. Meadows, Bosch, Mapei, Titebond, UCAN, 7885 Venture Street 855 Laval Crescent 1948 Dayton Street #101- 2050 Robertson Road Husqvarna, Xypex, Butterfield Color, Marshalltown and Chapin to provide you with the Burnaby, BC V5A1V1 Kamloops, BC V2C5P2 Kelowna, BC V1Y7W6 Prince George, BC V2N1X6 Tel: (604) 435-6700 Tel: (250) 374-6295 Tel: (250) 717-1616 Tel: (250) 614-1212 best cost-effective solutions to meet your concrete job requirements.
    [Show full text]
  • GENERAL 1.01 DESCRIPTION the WORK of This Section Includes Providing Concrete Formwork, Bracing
    SECTION 03100 FORMWORK PART 1 -- GENERAL 1.01 DESCRIPTION The WORK of this Section includes providing concrete formwork, bracing, shoring, supports and formwork requirements for concrete construction. 1.02 RELATED SECTIONS The WORK of the following Sections applies to the WORK of this Section. Other Sections of the Specifications, not referenced below, shall also apply to the extent required for proper performance of the WORK. 1. Section 03200 Concrete Reinforcement 2. Section 03290 Joints in Concrete Structure 3. Section 03300 Cast-in-Place Concrete 4. Section 03600 Grout 1.03 STANDARD SPECIFICATIONS Except as otherwise indicated in this Section of the Specifications, the CONTRACTOR shall comply with the Standard Specifications for Public Works Construction (SSPWC), as specified in Section 01071 Standard References. 1.04 QUALITY ASSURANCE A. REFERENCES: This section contains references to the documents listed below. They are a part of this section as specified and modified. Where a referenced document cites other standards, such standards are included as references under this section as if referenced directly. In the event of conflict between the requirements of this section and those of the listed documents, the requirements of this section shall prevail. Unless otherwise specified, references to documents shall mean the documents in effect at the time of Advertisement for Bids or Invitation to Bid (or on the effective date of the Agreement if there were no Bids). If referenced documents have been discontinued by the issuing organization, references to those documents shall mean the replacement documents FORMWORK DECEMBER 2014 PWS CONTRACT NO. 13-40UTIL 03100-1 issued or otherwise identified by that organization or, if there are no replacement documents, the last version of the document before it was discontinued.
    [Show full text]
  • Specifications Bone Dry Original Penetrating Sealer Description Finished Flooring and PH Protection Exterior Protection Concrete
    exterior slabs and garages from outside elements and salts from penetrating and deteriorating the concrete. Our sealer prevents moisture from penetrating into the concrete which causes aggregate to expand and damage the surface of the slab. Our sealer also protects the slab from Specifications becoming damaged in freeze/thaw conditions in Bone Dry Original Penetrating Sealer colder climates. Concrete Floor Preparation Description Remodeled Concrete Surfaces Bone Dry Original penetrating concrete sealer is a Bone Dry Original sealer must be applied to a clean, permanent, low VOC, cost effective solution to porous concrete surface in order to penetrate and protecting finished flooring from concrete moisture react to create a strong barrier. Existing concrete related issues. Bone Dry Original is easy to apply surfaces with prior surface coatings must either using a pump sprayer. Our Original sealer can be receive a top coating of concrete (self leveler, skim applied to new and existing concrete surface and can coating) or be mechanically profiled with a diamond be applied underneath or over the surface of any grinding or shot blasting machine in order to achieve Portland cement based concrete patch. Our water a clean, porous surface. Major floor leveling and based product solidifies to fill the pores below the skim coating must be completed using a Portland surface of the concrete slab preventing moisture cement based product and be completed prior to from reaching the surface. Bone Dry Original can be applying the original sealer. Minor patching and skim applied to interior and exterior concrete slabs coating can be completed after the sealer is applied.
    [Show full text]
  • SECTION 11 11 Sealers PRODUCT PAGE Guide to Seals
    ® ® TECHNICAL DATA SHEET Sec SECTION 11 11 Sealers PRODUCT PAGE Guide To Seals .................................................................................. 11-3 ANTI SLIP ADDITIVE Grip Aid ............................................................................................ 11-5 SOLVENT BASED AggreGloss™ J25 ............................................................................ 11-7 Sealers AggreGloss™ Satin J25S ................................................................. 11-9 Anti Spall J33 ................................................................................. 11-11 Tuf Seal™ J35 ................................................................................ 11-13 Tuf Seal™ Satin J35S ..................................................................... 11-15 WATER BASED / EARTH FRIENDLY Ultra Seal EF .................................................................................. 11-17 American Owned American Made Visit www.daytonsuperior.com for the most up to date technical information 11-1 ® Guide to ® Seals TECHNICAL DATA SHEET Sec WHAT ARE THE EXPECTATIONS OF THE SEALER Application 11 ■ To be topically applied or penetrating Apply the sealer in accord with the manufactures ■ Water repellency recommendations ■ Color or one that is transparent Several thin applications better than one heavy application ■ Increased abrasion resistance ■ Chemical resistance.. & to which chemicals Apply uniformly for best performance & esthetic value ■ Dustproofing Always recommend a mock-up using the same applicator
    [Show full text]
  • CCSI Densifier
    CCSI Densifier CCSI Densifier is an advanced colloidal silica and Lithium Silicate based hardener and densifier for concrete. CCSI Densifier brings efficiency and cost savings to the process of polishing concrete. Concentrate, 1 gallon yields 5 gallons of ready to use product covering about 2,500 sq. ft. CCSI Densifier provides a range of nano particle sizes that efficiently and quickly lock up a variety of concrete substrates. Particle sizes range from 5 to 45 Nanometers in size CCSI Densifier is safer and much more effective than conventional potassium or lithium silicate systems. Works on overlays such as Agri Rok does not require Portland cement to perform. CCSI Densifier can’t “white out” if over applied like with any silicate densifiers. Any residue is easily removed with a floor buffer. No VOCs or caustic residue to dispose of CCSI Densifier can be used as a finishing aid to harden concrete as it is troweled. Finishing and Curing Aid One of the uses of our CCSI Densifier is as a finishing and curing aid. It works by closing off the small capillaries which transport water to the surface where it can evaporate, limiting the rate of moisture loss. It has a very positive effect on polishing operations after the concrete. When used as a finishing aid or a curing aid: Concrete is constantly subjected to various drying conditions including, high concrete and/or ambient temperatures, low humidity, high winds, direct sunlight or work in heated interiors during cold weather, etc. Many of the high performance concrete mixes used on projects today are designed with low water/cement ratios and are prone to drying out prematurely.
    [Show full text]
  • Concrete Damage in Field Conditions and Protective Sealer and Coating Systems
    coatings Article Concrete Damage in Field Conditions and Protective Sealer and Coating Systems Md. Safiuddin Angelo Del Zotto School of Construction Management, George Brown College, 146 Kendal Avenue, Toronto, ON M5T 2T9, Canada; safi[email protected]; Tel.: +1-416-415-5000 (ext. 6692) Received: 23 May 2017; Accepted: 24 June 2017; Published: 29 June 2017 Abstract: Concrete structures undergo different forms of damage during their service life. The aim of this study is to identify the most common forms of concrete damage in field conditions. A number of concrete elements and structures were visually inspected and the damage was photographed. The damage phenomena covered are delamination, popout, spalling, scaling, drying shrinkage cracking, corrosion-induced cracking, map cracking, rust and salt stains, discoloration, and mold and moss growths. The probable reasons for these damage phenomena are discussed in this study. Moreover, this study highlights how concrete structures can be protected from the aforementioned forms of damage by using sealer and coating systems as surface treatments. Different sealer and coating systems, emphasizing their selection for specific uses, installation on concrete substrate, effects on concrete durability, performance criteria, and performance evaluation methods have been discussed. Furthermore, some recommendations are given to improve the performance of concrete sealer and coating systems for the protection of concrete structures in field conditions. Keywords: coating; concrete damage; sealer; protective measures 1. Introduction Concrete is one of the most widely used construction materials because of its affordability and versatility. However, concrete is not an indestructible construction material; different forms of damage occur over time under service and environmental conditions, causing cosmetic and structural flaws in concrete structures [1].
    [Show full text]
  • Crack and Concrete Deck Sealant Performance
    Crack and Concrete Deck Sealant Performance 2009-13 Take the steps... Research ...K no wle dge...Innovativ e S olu ti on s! Transportation Research Technical Report Documentation Page 1. Report No. 2. 3. Recipients Accession No. MN/RC 2009-13 4. Title and Subtitle 5. Report Date March 2009 Crack and Concrete Deck Sealant Performance 6. 7. Author(s) 8. Performing Organization Report No. Karl Johnson, Arturo E. Schultz, Catherine French, Jacob Reneson 9. Performing Organization Name and Address 10. Project/Task/Work Unit No. Department of Civil Engineering University of Minnesota 11. Contract (C) or Grant (G) No. 500 Pillsbury Drive S.E. (c) 89261 (wo) 7 Minneapolis, Minnesota 55455 12. Sponsoring Organization Name and Address 13. Type of Report and Period Covered Minnesota Department of Transportation Final Report 395 John Ireland Boulevard, Mail Stop 330 14. Sponsoring Agency Code St. Paul, Minnesota 55155 15. Supplementary Notes http://www.lrrb.org/PDF/200913.pdf 16. Abstract (Limit: 200 words) The objective of this project is to define the current state-of-the-art regarding the use of bridge deck sealants and crack sealers to extend the life of reinforced concrete bridge decks. The report includes the information generated from a literature review and survey which focused on current and significant studies in the field of deck and crack sealing. The intent of the survey was to determine common practices for the use and application of these sealers in different States throughout the United States. Based on the information collected from the literature review and the survey, the best sealant materials and application practices are recommended for use in Minnesota and throughout the Midwest.
    [Show full text]
  • Evaluation of Sealers and Waterproofers for Extending the Life Cycle of Concrete
    JOINT TRANSPORTATION RESEARCH PROGRAM INDIANA DEPARTMENT OF TRANSPORTATION AND PURDUE UNIVERSITY Evaluation of Sealers and Waterproofers for Extending the Life Cycle of Concrete Andrew Wiese, Yaghoob Farnam, Wesley Jones, Paul Imbrock, Bernie Tao, W. Jason Weiss SPR-3523 • Report Number: FHWA/IN/JTRP-2015/17 • DOI: 10.5703/1288284316002 RECOMMENDED CITATION Wiese, A., Farnam, Y., Jones, W., Imbrock, P., Tao, B., & Weiss, W. J. (2015). Evaluation of sealers and waterproofers for ex- tending the life cycle of concrete (Joint Transportation Research Program Publication No. FHWA/IN/JTRP-2015/17). West Lafayette, IN: Purdue University. http://dx.doi.org/10.5703/1288284316002 AUTHORS Andrew Wiese Graduate Research Assistant Lyles School of Civil Engineering, Purdue University Yaghoob Farnam, PhD Postdoctoral Research Associate Lyles School of Civil Engineering, Purdue University Wesley Jones Graduate Research Assistant Lyles School of Civil Engineering, Purdue University Paul Imbrock Graduate Research Assistant Lyles School of Civil Engineering, Purdue University Bernie Tao, PhD Professor of Agricultural and Biological Engineering Department of Agricultural & Biological Engineering, Purdue University W. Jason Weiss, PhD Jack and Kay Professor of Civil Engineering and Director of Pankow Materials Laboratory Lyles School of Civil Engineering, Purdue University (541) 737-1885 [email protected] Corresponding Author JOINT TRANSPORTATION RESEARCH PROGRAM The Joint Transportation Research Program serves as a vehicle for INDOT collaboration with
    [Show full text]
  • Radonseal Instructions
    deep-penetrating concrete sealer RadonSeal® is an eco-friendly, ready-to-use, reactive sealer formulated maximum penetration and sealing of capillaries inside poured concrete and cementitious substrates. RadonSeal works by absorbing through the surface and deep into concrete, chemically reacting, bonding, and inherently sealing the matrix of the concrete. RadonSeal is used for the mitigation of wicking water, water vapor, capillary water seepage and soil gases. Permanently strengthens concrete, hardens surfaces, and protects concrete against cracking, dusting, efflorescence, freeze-thaw, s i n c e 1 9 9 7 road salts, deicing chemicals and minor defects. MOISTURE BLOCK PERMANENT STRENGTHENS ZERO VOCs NO-SLIP PAINTABLE BREATHABLE uses applying radonseal RadonSeal Standard – Recommened for indoor and outdoor poured concrete Apply using a hand-pump sprayer equipped with fan tip nozzle (recommended). INSTRUCTION surfaces, walls and floors. Alternatively, a paint roller can be used if spraying is not feasible. RadonSeal is applied in wet-on-wet applications. Agitate container thoroughly before use. • Indoor Poured Concrete: Less than 20-years old. STEP 1: Using the pump sprayer, mop, or roller lightly • Outdoor Poured Concrete: Less than 2-years old. dampen the concrete surface with water to help improve • Stucco sealer penetration. • Limestone STEP 2: Spray RadonSeal uniformly to the surface, RadonSeal Plus – Highly concentrated for older, more porous concrete. maintaining a continuous wetting film. For floors, moderately Recommended for indoor poured concrete over 20-years old. Outdoor poured concrete scrub wet surface with push broom working the sealer over 2-years old. (*can be used on concrete less than 20-years). Heavyweight into the concrete.
    [Show full text]
  • Rothenberg Architecture Sw Regional Park 11/11/2010 Administration Facilities Concrete Formwork 031000-1
    ROTHENBERG ARCHITECTURE SW REGIONAL PARK 11/11/2010 ADMINISTRATION FACILITIES SECTION 031000 CONCRETE FORMWORK PART 1 - GENERAL 1.01 SECTION INCLUDES A. Formwork for cast-in-place concrete, with shoring, bracing and anchorage. B. Openings for other work. C. Form accessories. D. Form stripping. 1.02 RELATED SECTIONS A. Section 032000 - Concrete Reinforcement. B. Section 033000 - Cast-in-Place Concrete. C. Section 072600 - Under - Slab Vapor Barrier 1.03 REFERENCES A. American Concrete Institute (ACI): 1 . ACI 117-90 Specifications for Tolerances for Concrete Construction and Materials. 2. ACI 301-96 Specification for Structural Concrete for Buildings. 3. ACI 318-95 Building Code Requirements for Reinforced Concrete. 4. ACI 347 -(R94) Recommended Practice For Concrete Formwork. B. American Plywood Association (APA): 1. APA Plywood Design Specification, Form No. Y51 OL, August, 1986. 2. APA Design/Construction Guide, Concrete Forming, Form No. V345S, Sept, 1996. C. National Forest Products Association (NFPA). 1. National Design Specification for Wood Construction, 1986 Editions with 1990 Revisions. 2, Design Values for Wood Construction, January 1986, with 1990 Revisions. 1 .04 CONTRACTOR RESPONSIBILITY A. Formwork design and engineering. B. Construction of formwork, shoring, removal of forms, and re-shoring. C. Providing a safe structure at all times and insuring safety to human life and property. 1.05 DESIGN REQUIREMENTS: A. General: In accordance with the references. B. Design: Design formwork to withstand applicable hydrostatic pressure of concrete plus dead weight, construction loads and vibrations. B. Limit deflection of studs and whalers to 1/400 of the span for architectural concrete and 1/360 of the span for other concrete.
    [Show full text]
  • Nevada DOT Research Report 224-14-803 to 12 Improving The
    NDOT Research Report Report No. 224-14-803 TO 12 Improving the Long-Term Performance of Concrete Bridge Decks using Deck and Crack Sealers June 2018 Nevada Department of Transportation 1263 South Stewart Street Carson City, NV 89712 Disclaimer This work was sponsored by the Nevada Department of Transportation. The contents of this report reflect the views of the authors, who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views or policies of the State of Nevada at the time of publication. This report does not constitute a standard, specification, or regulation. TECHNICAL REPORT DOCUMENTATION PAGE 1. Report No. 2. Government Accession No. 3. Recipient’s Catalog No. P224-14-803 Task Order 12 4. Title and Subtitle 5. Report Date Improving the Long-Term Performance of Concrete Bridge Deck using Deck June 30, 2018 and Crack Sealers 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. David Sanders and Karim Mostafa 9. Performing Organization Name and Address 10. Work Unit No. University of Nevada, Reno 1664 N Virginia St. MS258 11. Contract or Grant No. Reno, NV 89557 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered Nevada Department of Transportation Final Report 1263 South Stewart Street 14. Sponsoring Agency Code Carson City, NV 89712 15. Supplementary Notes 16. Abstract Maintaining bridge decks is a huge issue. It is critical to extend the life of a bridge deck as long as possible since bridge deck replacement is difficult, expensive, and it significantly disrupts the traveling public.
    [Show full text]