C1 Chemistry Refers to the Conversion of Simple Carbon-Containing Materials That Contain One Carbon Atom Per Molecule Into Valuable Products

Total Page：16

File Type：pdf, Size：1020Kb

C1 chemistry refers to the conversion of simple carbon-containing materials that contain one carbon atom per molecule into valuable products. The feedstocks for C1 chemistry include natural gas, carbon dioxide, carbon monoxide, methanol and synthesis gas (a mixture of carbon monoxide and hydrogen). Synthesis gas, or syngas, is produced primarily by the reaction of natural gas, which is principally methane, with steam. It can also be produced by gasification of coal, petroleum coke, or biomass. The availability of syngas from coal gasification is expected to increase significantly in the future because of increasing development of integrated gasification combined cycle (IGCC) power generation. Because of the abundance of remote natural gas, the advent of IGCC, and environmental advantages, C1 chemistry is expected to become a major area of interest for the transportation fuel and chemical industries in the relatively near future. The CFFLS will therefore perform a valuable national service by providing science and engineering graduates that are trained in this important area. Syngas is the source of most hydrogen. Approximately 10 trillion standard cubic feet (SCF) of hydrogen are manufactured annually in the world. Most of this hydrogen is currently used for the production of ammonia and in a variety of refining and chemical operations. However, utilization of hydrogen in fuel cells is expected to grow significantly in the next century. Syngas is also the feedstock for all methanol and Fischer-Tropsch plants. Currently, world consumption of methanol is over 25 million tons per year. There are many methanol plants in the U.S. and throughout the world. Methanol and oxygenated transportation fuel products play a significant role in the CFFLS C1 program. Currently, the only commercial Fischer-Tropsch plants are overseas, principally in South Africa (SASOL). However, new plants are being built or planned for a number of locations. One possible location for future F-T plant development in the U.S. is in the Alaskan oil fields. .

Copy Link

Recommended publications

A DFT Study of Synthesis of Acetic Acid from Methane and Carbon Dioxide
_______________________________________________________________________________www.paper.edu.cn Chemical Physics Letters 368 (2003) 313–318 www.elsevier.com/locate/cplett A DFT study of synthesis of acetic acid from methane and carbon dioxide Jian-guo Wang a, Chang-jun Liu a,*, Yue-ping Zhang b, Baldur Eliasson c a State Key Laboratory of C1 Chemistry and Technology, ABB Plasma Greenhouse Gas Chemistry Laboratory and School of Chemical Engineering, Tianjin University, Tianjin 300072, PR China b Department of Chemistry, Tianjin University, Tianjin 300072, PR China c ABB Switzerland Ltd., CH5405, Baden, Switzerland Received 2 October 2002; in ﬁnal form 20 November 2002 Abstract We have previously reported an experimental investigation on synthesis of acetic acid directly from CH4 and CO2 via dielectric-barrier discharge. In this work, a DFT study was conducted using three hybrid DFT methods in order to À understand the mechanism of such direct synthesis. It suggests that the synthesis is via two pathways with CO2 and CO À as key intermediates. The energy requirement with CO2 pathway is much less than that with CO. The methyl radical formation and the dissociation of CO2 are two limiting steps for the synthesis of acetic acid directly from CH4 and CO2. Ó 2002 Elsevier Science B.V. All rights reserved. 1. Introduction [1,2]. But methane utilization still remains as a big challenge to chemists all over the world. Methane is the principal component of natural One of the important target molecules of direct gas, coalbed methane, associated gas of oil ﬁelds methane conversion is acetic acid [5–9] and some by-product gases of chemical plants.
[Show full text]
C1 Chemistry for the Production of Ultra-Clean Liquid Transportation Fuels and Hydrogen
C1 Chemistry for the Production of Ultra-Clean Liquid Transportation Fuels and Hydrogen Annual report Research conducted October 1, 2003-September 30, 2004 U.S. Department of Energy Contract No. DE-FC26-02NT41594 Prepared by the Consortium for Fossil Fuel Science Gerald P. Huffman, Director University of Kentucky/CFFS 533 S. Limestone Street, Suite 107 Lexington, KY 40506-0043 Phone: (859) 257-4027 FAX: (859) 257-7215 E-mail: [email protected] Consortium for Fossil Fuel Science University of Kentucky West Virginia University University of Pittsburgh University of Utah Auburn University Consortium for Fossil Fuel Science 1 This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. 2 C1 Chemistry for the Production of Clean Liquid Transportation Fuels and Hydrogen U.S. DOE Contract No. DE-FC26-02NT41594 ABSTRACT: The Consortium for Fossil Fuel Science (CFFS) is a research consortium with participants from the University of Kentucky, University of Pittsburgh, West Virginia University, University of Utah, and Auburn University.
[Show full text]
A Heat Exchanger Reactor Equipped with Membranes to Produce Dimethyl Ether from Syngas and Methyl Formate and Hydrogen from Methanol
64 International Journal of Membrane Science and Technology, 2016, 3, 64-84 A Heat Exchanger Reactor Equipped with Membranes to Produce Dimethyl Ether from Syngas and Methyl Formate and Hydrogen from Methanol A. Bakhtyari, A. Darvishi, and M.R. Rahimpour* Department of Chemical Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz 71345, Iran Abstract: The energy crisis of the century is a motivation to present processes with higher energy efficiency for production of clean and renewable resources of energy. Hence, a catalytic heat exchanger reactor for production of dimethyl ether (DME) from syngas, and hydrogen and methyl formate (MF) from methanol is investigated in the present study. The proposed configuration is equipped with two different membranes for in-situ separation of products. Syngas is converted to DME through an exothermic reaction and it supplies a part of required energy for the methanol dehydrogenation reaction. Produced water in the exothermic side and produced hydrogen in the endothermic side are separated by using appropriate perm-selective membranes. In-situ separation of products makes the equilibrium reactions proceed toward higher conversion of reactants. A mathematical model based on reasonable assumptions is developed to evaluate molar and thermal behavior of the configuration. Performance of the system is aimed to enhance by obtaining optimum operating conditions. In this regard, Genetic Algorithm is applied. Performance of the heat exchanger double membrane reactor working under optimum conditions (OTMHR) is compared with a heat exchanger reactor without membrane (THR). OTMHR promotes methanol conversion to MF to %87.2, carbon monoxide conversion to %95.8 and hydrogen conversion to %64.6.
[Show full text]
Conversion of Green Methanol to Methyl Formate
catalysts Review Conversion of Green Methanol to Methyl Formate Doreen Kaiser, Luise Beckmann, Jan Walter and Martin Bertau * Institute of Chemical Technology, TU Bergakademie Freiberg, Leipziger Straße 29, 09599 Freiberg, Germany; [email protected] (D.K.); [email protected] (L.B.); [email protected] (J.W.) * Correspondence: [email protected]; Tel.: +49-3731-392384 Abstract: Methyl formate is a key component for both defossilized industry and mobility. The current industrial production via carbonylation of methanol has various disadvantages such as high requirements on reactant purity and low methanol conversion rates. In addition, there is a great interest in replacing the conventional homogeneous catalyst with a heterogeneous one, among other things to improve the downstream processing. This is why new approaches for methyl formate are sought. This review summarizes promising approaches for methyl formate production using methanol as a reactant. Keywords: carbonylation; green chemistry; methanol; methyl formate; synfuel 1. Introduction Methyl formate (MF) is one of the most important building blocks in C1 chemistry and it is of great interest as an emission reducing fuel additive. MF can be synthesized from CO and methanol and can be understood as chemical storage for CO. If methanol is produced Citation: Kaiser, D.; Beckmann, L.; from CO2 and hydrogen, which is generated through water electrolysis by renewable Walter, J.; Bertau, M. Conversion of energy, an access to green MF is created. This way a (partial) substitution for classical i.e., Green Methanol to Methyl Formate. fossil feedstock borne petrochemicals can be realized while reducing CO2 emissions.
[Show full text]
Methanethiol, a Potential New Feedstock in C1 Chemistry 4 December 2020
Methanethiol, a potential new feedstock in C1 chemistry 4 December 2020 and hydrogen sulfide was already attempted 30 years ago. This led to the development of a class of alkali-promoted molybdenum sulfide (K/MoS2) catalysts which, despite their promise, has not yet made the direct synthesis process competitive enough compared to the conventional methanol route. For the next step, Yu explored the reaction mechanism of CH3SH synthesis in detail by advanced spectroscopic and microscopic techniques. These meticulous studies yielded a surprising outcome: instead of potassium (K), cesium (Cs) shows a much better performance in promoting the activity of the MoS2 catalysts. Miao Yu. Credit: Eindhoven University of Technology Moreover, it turned out that the MoS2 component is not needed at all—alkali sulfides alone can catalyze CH3SH synthesis. These insights make it possible to develop new catalysts that are much more cost Catalytic conversion of molecules with one carbon effective, bringing us one step closer to large-scale atom such as methane, carbon dioxide (CO2), CH3SH synthesis. methanol (CH3OH) and others into higher-value chemicals is of major importance for a viable and Now that there are prospects for CH3SH to become sustainable chemical industry. Ph.D. candidate a cheap commodity chemical, it is worthwhile to Miao Yu, of the TU/e Department of Chemical explore the conversion of this simple molecule to Engineering and Chemistry, explored the synthesis ethylene, which is the main building block for of an alternative building block, methanethiol polyethylene. To this end, it is necessary to make (CH3SH)—the sulfur analog of CH3OH—from cheap carbon-carbon bonds.
[Show full text]
Future Perspectives for Formaldehyde: Pathways for Reductive Synthesis and Energy Storage Green Chemistry
Green Volume 19 Number 10 21 May 2017 Pages 2299–2464 Chemistry Cutting-edge research for a greener sustainable future rsc.li/greenchem Themed issue: Harvesting Renewable Energy with Chemistry ISSN 1463-9262 PERSPECTIVE Martin H. G. Prechtl et al. Future perspectives for formaldehyde: pathways for reductive synthesis and energy storage Green Chemistry View Article Online PERSPECTIVE View Journal | View Issue Future perspectives for formaldehyde: pathways for reductive synthesis and energy storage Cite this: Green Chem., 2017, 19, 2347 Leo E. Heim,† Hannelore Konnerth† and Martin H. G. Prechtl* Formaldehyde has been a key platform reagent in the chemical industry for many decades in a large number of bulk scale industrial processes. Thus, the annual global demand reached 30 megatons per year, and currently it is solely produced under oxidative, energy intensive conditions, using high-tempera- ture approaches for the methanol oxidation. In recent years, new ﬁelds of application beyond the use of formaldehyde and its derivatives as i.e. a synthetic reagent or disinfectant have been suggested. For example dialkoxymethane could be envisioned as a direct fuel for combustion engines or aqueous for- maldehyde and paraformaldehyde may act as a liquid organic hydrogen carrier molecule (LOHC) for hydrogen generation to be used for hydrogen fuel cells. To turn these new perspectives in feasible approaches, it requires also new less energy-intensive technologies for the synthesis of formaldehyde. Creative Commons Attribution-NonCommercial 3.0 Unported Licence. This perspective article spreads light on the recent directions towards the low-temperature reductive syn- Received 9th November 2016, thesis of formaldehyde and its derivatives and low-temperature formaldehyde reforming for hydrogen Accepted 16th December 2016 generation.
[Show full text]
Chemistry 505/Chemical and Biological Engineering 505: Aspects of Industrial Chemistry and Business Fundamentals Spring 2015 – Ive Hermans, William Banholzer
Chemistry 505/Chemical and Biological Engineering 505: Aspects of Industrial Chemistry and Business Fundamentals Spring 2015 – Ive Hermans, William Banholzer The objective of this course will be to educate students in the chemistry and chemical engineering that defines societies’ standard of living. Commercial chemical processes will be reviewed. Practical realities of how a discovery moves from research to a commercial product will be taught through examples and case studies. Financial concepts that guild investment will be reviewed including market adoption, the “technology “S” curve, venture capital vs. corporate models, and intellectual property. Professors: Ive Hermans (608-262-4996, [email protected]) William Banholzer (608-265-3413, [email protected]) Credits: 3 – 150 minutes/week Time: TBD Location: TBD Prerequisites: Junior standing or higher and Chem 345, or consent of instructor Learning Objectives: This course will: (1) Provide students with a sound overview of the most important value‐chains in the chemical industry. (2) Connect the fundamental chemistry and chemical engineering principles that the students have learned in other courses with real‐world applications. (3) Teach students how laboratory discoveries can be protected (Intellectual Property) and successfully commercialized. (4) Teach students how to assess alternative technologies against the available state‐of‐the‐art benchmark. Topics Topic Covered include the following: 1. Chemical industry integration, feedstock, product flow. 2. Industrial important inorganic chemistry (e.g., Chlor-alkali, nitric, sulfuric, and phosphoric acid) 3. Industrial important organic chemistry including: a. Organic Feedstocks (petroleum, natural gas, bio-derived) b. C1-chemistry (methane, syn-gas, methanol and formaldehyde) c. C2-chemistry (ethane, ethene, ethylene oxide, ethylene glycol and key derivatives) d.
[Show full text]
Catalysis in C 1 Chemistry Catalysis by Metal Complexes
CATALYSIS IN C 1 CHEMISTRY CATALYSIS BY METAL COMPLEXES Editors: R. UGO, University of Milan, Milan, Italy B. R. J AMES, University of British Columbia, Vancouver, Canada Advisory Board: J. L. GARNETT, University ofNew South Wales,Kensington,Australia L. MARKO, Hungarian Academy of Sciences, Veszprem, Hungary ICHIRO MORIT ANI, Osaka University, Osaka, Japan W. ORME-J OHNSON, Massachusetts Institute of Technology, Cambridge, Mass., U.S.A. R. L. RICHARDS, University of Sussex, Brighton, England C. A. TOLMAN, E. I. du Pont de Nemours Comp., Inc., Wilmington, Del., U.S.A. VOLUME 4 CATALYSIS IN C1 CHEMISTRY Edited by WILHELM KEIM Institut fur Technische Chemie und Petrolchemie der R WTH, Aachen D. REIDEL PUBLISHINGtt... COMPANY A MEMBER OF THE KLUWER " ACADEMIC PUBLISHERS GROUP DORDRECHT/BOSTON/LANCASTER Library of Congress Cataloging in Publication Data Main en try under title: Catalysis in C l Chemistry. (Catalysis by Metal Complexes: v. 4) Bibliography: p. Includes index. 1. Carbon compounds. 2. Catalysis. 1. Keirn, Wilhelm, 1934- II. Series. QD281.C3C36 1983 546:681595 83-9593 ISBN-13: 978-94-009-7042-7 e-ISBN-13: 978-94-009-7040-3 001: 10. 1007/978-94-009-7040-3 Published by D. Reidel Publishing Company, P.O. Box 17, 3300 AA Dordrecht, Holland. Sold and distributed in the U.S.A. and Canada by Klu\ler Academic Publishers 190 Old Derby Street, Hingham, MA 02043, U.S.A. In all other countries. sold and distribu ted by Kluwer Academic Publishers Group, P.O. Box 322,3300 AH Dordrecht, Holland. All Rights Reserved Copyright © 1983 by D.
[Show full text]
Ionic Liquid Co-Catalyzed Artificial Photosynthesis of CO
Ionic Liquid Co-catalyzed Artificial Photosynthesis of CO SUBJECT AREAS: Jinliang Lin, Zhengxin Ding, Yidong Hou & Xinchen Wang ELECTRON TRANSFER LIGHT HARVESTING Research Institute of Photocatalysis, Fujian Provincial Key Laboratory of Photocatalysis-State Key Laboratory Breeding Base, and ORGANOCATALYSIS College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350002, P. R. China. HOMOGENEOUS CATALYSIS The conversion of CO2 to chemical feedstocks is of great importance, which yet requires the activation of Received thermodynamically-stable CO2 by metal catalysts or metalloenzymes. Recently, the development of 19 October 2012 metal-free organocatalysts for use in CO2 activation under ambient conditions has opened new avenues for carbon fixation chemistry. Here, we report the capture and activation of CO2 by ionic liquids and coupling to Accepted photoredox catalysis to synthesize CO. The chemical nature of anions and the organic functional groups on 14 December 2012 the imidazolium cations of ionic liquids, together with reaction medium have been demonstrated to have remarkable effects on the activation and reduction of CO2. Considering almost unlimited structural Published variations of ionic liquids by a flexible combination of cations and anions, this photochemical pathway 11 January 2013 provides unique opportunities for carbon fixation by rationally-designed chemical systems via linking ionic liquid based materials with chromorphoric molecules in tackling the great challenges of artificial photosynthesis. Correspondence and requests for materials onversion of carbon dioxide (a main component of natural photosynthesis) as a renewable C1 feedstock to should be addressed to value-added compounds (e.g., methane, methanol, carbon monoxide, and sugar) has attracted consid- X.C.W. (xcwang@fzu.
[Show full text]
Production and Storage of Hydrogen from Coal Using C1 Chemistry
II.B.12 Production and Storage of Hydrogen from Coal Using C1 Chemistry Approach Gerald P. Huffman Experimental results and equilibrium calculations University of Kentucky – CFFLS show that high reaction temperature is favorable for H Consortium for Fossil Fuel Liquefaction Science 2 533 S. Limestone St., Room 111 production, and low temperature improves methane Lexington, KY 40506 production and selectivity. Among the catalysts we have Phone: (859) 257-4027; E-mail: [email protected] tested, Cu/MgO exhibits the highest H2 production but has low methane production and selectivity. Cu/TiO2 DOE Technology Development Manager: catalyst has high methane production and selectivity but Dan Cicero low H2 production, while Cu/Al2O3 catalyst has very low Phone: (412) 386-4826 methane production and selectivity with high amounts E-mail: [email protected] of dimethyl ether, probably due to the acidic nature of the support. Cu/ZrO is the most effective for co- DOE Project Officer: Donald Krastman 2 production of H2 and methane at temperatures between Phone: (412) 386-4720 o E-mail: [email protected] 240ºC and 260 C; this catalyst shows high promise and is being more thoroughly investigated. Contract Number: DE-FC26-05NT42456 In this project, the reforming of methanol is Start Date: June 2005 carried out in supercritical water at 276 bar and 700°C Projected End Date: October 2008 to produce H2 along with CO, CH4 and CO2. The reactions are catalyzed by the wall of the tubular reactor made of Inconel 600 which is an alloy of Ni, Cr and Fe.
[Show full text]
Distribution and Fate of Selected Oxygenated Organic Species in the Troposphere and Lower Stratosphere Over the Atlantic
JOURNAL OF GEOPHYSICAL RESEARCH, VOL. 105, NO. D3, PAGES 3795-3805, FEBRUARY 16, 2000 Distribution and fate of selected oxygenated organic species in the troposphere and lower stratosphere over the Atlantic H. Singh,• Y. Chen,• A. Tabazadeh,• Y. Fukui,• I. Bey,2 R. Yantosca,2D. Jacob,2 F. Arnold,3 K. Wohlfrom,3 E. Atlas,4 F. Flocke,4 D. Blake,• N. Blake,• B. Heikes,6 J. Snow,6R. Talbot,7G. Gregory,8G. Sachse,8S. Vay,8 and Y. Kondo9 Abstract. A large numberof oxygenatedorganic chemicals (peroxyacyl nitrates,alkyl nitrates, acetone,formaldehyde, methanol, methylhydroperoxide, acetic acid and formic acid) were measured during the 1997 SubsonicAssessment (SASS) Ozone and Nitrogen Oxide Experiment (SONEX) airbornefield campaignover the Atlantic. In this paper,we presenta first pictureof the distribu- tion of theseoxygenated organic chemicals (Ox-organic) in the troposphereand the lower strato- sphere,and assesstheir sourceand sink relationships.In both the troposphereand the lower stratosphere,the total atmosphericabundance of theseoxygenated species (ZOx-organic) nearly equalsthat of total nonmethanehydrocarbons (ZNMHC), which have been traditionallymeasured. A sizablefraction of the reactivenitrogen (10-30%) is presentin its oxygenatedorganic form. The organicreactive nitrogen fraction is dominatedby peroxyacetylnitrate (PAN), with alkyl ni- tratesand peroxypropionyl nitrate (PPN) accounting for <5% of totalNOy. Comparisonof obser- vationswith the predictionsof the Harvard three-dimensionalglobal model suggeststhat in many key areas(e.g., formaldehydeand peroxides)substantial differences between measurements and the- ory are presentand must be resolved. In the caseof CH3OH, there appearsto be a large mismatch betweenatmospheric concentrations and estimatedsources, indicating the presenceof major un- known removalprocesses. Instrument intercomparisons as well as disagreementsbetween obser- vationsand model predictionsare usedto identify neededimprovements in key areas.
[Show full text]
A Comprehensive Kinetic Model of Ethylene and Acetylene Oxidation at High Temperatures
A Progress Report on A Comprehensive Kinetic Model of Ethylene and Acetylene Oxidation at High Temperatures for Work carried out under a contract from the trustees of Princeton University as a part of a research program on Optimization of a Comprehensive Detailed Chemical Kinetic Model for Simulating High-Speed Propulsion An AFOSR New World Vista Program Submitted to Department of Mechanical and Aerospace Engineering Princeton University (Professor C. K. Law) Prepared by Hai Wang, Assistant Professor and Alexander Laskin, Postdoctoral Research Associate Department of Mechanical Engineering University of Delaware Newark, DE 19716 Table of Contents Table of Contents ..................................................................................ii List of Tables .......................................................................................iii List of Figures...................................................................................... iv 1. Introduction .....................................................................................1 2. Critical Survey of Literature Combustion Data..............................................2 2.1. Shock-Tube Ignition ................................................................2 2.2. Laminar Burning Velocity.......................................................... 4 2.3. Burner-Stabilized Flames ..........................................................5 3. Quantum Mechanical and RRKM calculations ..............................................5 3.1. Computational Methodologies....................................................
[Show full text]