DOCSLIB.ORG

Deck Equipment & Rigging Hardware

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Deck Equipment & Rigging Hardware Deck Equipment & Rigging Hardware 203 Jean-Marie Liot © Jib reefing The Plastimo jib reefing range stems from 50 years of expertise in high-pressure injection and composite materials engineering. Designed for 4 to 11-metre boats, our headsail reefing meets the needs of all yachtsmen, whether experienced sailors or beginners. Very easy to use and virtually maintenance free, the Plastimo jib reefing is a reliable crewmember which contributes to your sailing performance. Selecting your Plastimo jib reefing Spar design : S-series or T-series ? Ø 4-7 mm Ø 31 mm The S-series jib reefing features a single- groove spar (S for "single"). Its patented Ø 6.5 mm assembly system allows for very easy installation with no need to unstep the existing forestay. The T-series jib reefing features a twin- Ø 4-7 mm Ø 31 mm groove spar (T for "twin"). It allows the use of the jib reefing on a hollow forestay when racing, or the setting of twin head sails, to avoid hoisting the spinnaker. Ø 5 mm Chainplates or turnbuckle ? - Most sailing boats are equipped with chainplates to fasten the forestay to the stem fitting. Chainplates come with several holes which facilitates the adjustment of the standing rigging. The use of chainplates also allows to position the tack point as low as possible. - The turnbuckle version allows for more accurate rigging adjustments. However, the tack point will have to be positionned slightly higher depending on the turnbuckle size. Which jib reefing size for my boat ? Plastimo proposes 3 models to fit all sailboats from 4 to 11 metres. While the boat length is important, you must also consider the forestay diameter and the headsail size. For example, in the case of a 6-metre boat, the 406 model will offer the best compromise. However, if the headsail size is much larger than the maximum sail area recommended, selecting a 609 model is a better option. Each assembly operation requires the utmost care and attention, such as the setting of the Torlon® balls in the 316L stainless steel cages. 4-6 m 406 jib reefing Lightweight and sturdy, the 406 jib reefing features all the benefits of a large headsail reefing system : 2 Delrin® twin ball bearing races in both drum and halyard swivel. All components are manufactured from polyamide. 406 JIB REEFING Boat length For boats from 4 to 6 m (14 to 20 ft) Model 406-S 406-S 406-T 406-T CHAINPLATES TURNBUCKLE CHAINPLATES TURNBUCKLE Version MOUNTING MOUNTING MOUNTING MOUNTING Reference 25722 25723 25200 25286 Forestay diameter 4 - 7 mm 4 - 7 mm 4 - 7 mm 4 - 7 mm E. Le Meur E. Supplied complete* for forestay : • chainplates version 6.35 m - 6.75 m - • turnbuckle version - 6.45 m - 6.85 m Max. headsail size 12 m2 12 m2 12 m2 12 m2 Luffrope diameter, finished 6.5 mm 6.5 mm 5 mm 5 mm Drum sheet capacity 7 m, Ø 5 mm 7 m, Ø 5 mm 7 m, Ø 5 mm 7 m, Ø 5 mm * For additional forestay packages, please refer to following pages. 609 jib reefing The 609 drum cheeks swivel through 360°, ensuring safe manoeuvres through a smooth and regular feeding of the tiller rope. These cheeks protect the reefing drum efficiently and the round unobtrusive design, combined with recessed screws, allow the free running of the ropes. Reefing drum features highly resistant stainless steel and Delrin® ball bearings. Halyard swivel features Torlon® and Delrin® ball bearings which enhances the overall performance and increases the mechanical resistance. Chainplates width is adjustable. 6-9 m 609 JIB REEFING Boat length For boats from 6 to 9 metres (20 to 30 ft) Model 609-S 609-S 609-T 609-T CHAINPLATES TURNBUCKLE CHAINPLATES TURNBUCKLE Version MOUNTING MOUNTING MOUNTING MOUNTING Reference 58202 58203 58207 58208 Forestay diameter 4-7 mm 4-7 mm 4-7 mm 4-7 mm Supplied complete* for forestay : chainplates version 9.40 m - 8.95 m - turnbuckle version - 9.55 m - 9.10 m Max. headsail size 25 m2 25 m2 25 m2 25 m2 Luffrope diameter, finished 6.5 mm 6.5 mm 5 mm 5 mm Drum sheet capacity 13 m, Ø 6 mm 13 m, Ø 6 mm 13 m, Ø 6 mm 13 m, Ø 6 mm * For additional forestay packages, please refer to following pages. Delrin® is a registered trademark of Dupont Polymers. Torlon® is a registered trademark of Solvay. 811 jib reefing The 811 drum cheeks swivel through 360°, ensuring safe manoeuvres through a regular feeding of the tiller rope. The drum core is manufatured from highly resistant aluminium combining performance and lightweight features. Drum and halyard swivel are equipped with Torlon® and Delrin® ball bearings for increased performance and mechanical resistance. 811 model comes as standard with adjustable chain plates, allowing both mounting possibilities (chainplates or turnbuckle). 811 JIB REEFING Boat length For boats from 8 to 11 metres (26 to 36 ft) Model 811-S 811-T Reference 58204 58209 Forestay diameter 4 - 7 mm 4 - 7 mm Supplied complete* 11.20 m 11.40 m for forestay : Max. headsail size 35 m2 35 m2 Luffrope diameter, finished 6.5 mm 5 mm Drum sheet capacity 17.5 m, Ø 8 mm 17.5 m, Ø 8 mm * For additional forestay packages, please refer to the following page. Delrin® is a registered trademark of Dupont Polymers. Torlon® is a registered trademark of Solvay. Options Description Reference 406-S 406-T 609-S 609-T 811-S 811-T Rope pre-feeder 25884 - - - If the angle between the halyard and the spar is inferior to 10°, it is recommended to add : • for a masthead rig : Halyard diverter wheel Prevents the genoa halyard 25720 from twisting around the spar. • for a masthead or fractional rig : St. steel halyard feeder Fixing plate 42 x 18 mm 26140 ---- Halyard Ø 12 mm Drilling 2 x Ø 4 mm St. steel halyard feeder Fixing plate 45 x 45 mm 25677 -- Halyard Ø 18 mm Drilling 4 x Ø 4.8 mm Additional packages Description Reference 406 S 406 T 609 S 609 T 811 S 811 T 1.5 m. Includes : 1 alloy spar, 1 plastic spar, 1 quick-coupling 26901 - - - sleeve with screws Spar package 2.15 m. Includes : 1 alloy spar, 26902 - - - 1 quick-coupling sleeve with screws Includes : 12.50 m pre-stretched sheet Ø 4 mm, ref. 48116 ; 3 blocks ref. 10589 17069 ---- Blocks for stanchion Ø 25 mm and sheets package Includes : 20 m pre-stretched sheet Ø 6 mm, ref. 51244 ; 4 blocks ref. 10589 17071 -- for stanchion Ø 25 mm J N Check on www.plastimo.com to identify the part that you are looking for. I Spare parts B M 406 S 406 T 609 S 609 T 811 S 811 T 25752 25184 25752 25184 25752 25184 C A B + C 26901 26902 26901 26902 26901 26902 C (x 7) 55979 55980 55979 55980 55979 55980 L + N + J 55977 55978 55977 55978 55977 55978 A L I 17067 17067 58248 58248 58248 58248 D 10001 10001 58244 58244 58249 58249 K M E 62353 62353 58245 58245 58250 58250 C G + H + K 55975 55976 55975 55976 55975 55976 F (5 holes) 26325 26325 21291 21291 22850 22850 F (11 holes) 21308 21308 21295 21295 - D E M (x 1) 26179 - 26179 - 26179 - 56728 - 56728 - 56728 - F M (x 7) G Plastic sliders (x 15) 17065 17065 17065 17065 17065 17065 H Spreader boots White PVC anti-chafe covers. Protect your sails from chafing at cross trees and help foot of genoa over stanchions when sheeting in. Easy fitting, even after the mast has been stepped. Round spreader Spinnaker pole For Ø Ref. Model/use holders 4 - 6 mm 17060 Flat spreader - 10 x 30 mm 16796 7 - 12 mm 17061 Flat spreader - 10 x 30 mm White PVC spinnaker pole brackets. 6 mm 17062 Round spreader or stanchion - Ø 28 mm Set of 2 deck housing brackets. 9 mm 17063 Round spreader or stanchion - Ø 30 mm Size inside shoe : 70 x 90 mm. 12 mm 17064 Round spreader or stanchion - Ø 50 mm 19 mm 10633 Round spreader or stanchion - Ø 53 mm Bosun’s chairs Yann Georges© Yann Professional bosun’s chair 12748 Reinforced seams, heavy duty webbing and canvas, and larger seat.The back strap and crotch piece will not only prevent you from falling out of the chair, but are so designed that the angle of the chair can be adjusted, allowing each individual to find the most comfortable working balance between back and legs. The wrap-around design provides added comfort and safety, ideal for an extended time aloft. • PVC coated on both sides, 500 g/m2. • Extra-wide 50 mm webbing. • Rigid board seat, 42 x 22 cm. • Safe working load : 150 kg*. Plastimo bosun’s chair, Professional model : "Simple, strong and very sturdy with no difficult pressure points (…) and remarkable load bearing. This is a heavy-duty vinyl bucket chair, (… ) with a seat sewn in and supported by three easily inspected webbing The chair folds flat slings, and another webbing strap (…) with a single in a pouch which stainless D ring. The crotch strap also runs through the D ring and there’s converts into a large a high, secure backrest with an adjustment strap on the side. tool pocket when It comes in a vinyl stowage bag that cleverly clips on with the chair is in use. a plastic clip to double as a kit bag when going aloft." An elasticated band also helps storing smaller tools April 2013 * Safe working load indicated applies to the weakest element in the chair, i.e.
Load more

Recommended publications
  • June 2011 – Compass Points Too and That Means We Need YOUR Help Too
    June 2, 2011 | Arizona Yacht Club Monthly Magazine Talented as this bunch is, a ship the size of AYC needs a big crew June 2011 – Compass Points too and that means we need YOUR help too. So step up, “grab a line”, ask how you can help “trim” the sails on this vessel we June 2, 2011 4:20 am call the Arizona Yacht Club. Crew comes in all shapes and sizes Summer is upon us! New Board of Directors, time to renew your and there are roles just right for everyone to make a difference, membership, time to head for cooler climates for sailing, time to from racing, sailing classes, and equipment maintenance, to get the family out for FAMILY NIGHT and take the challenge! helping re-energize our juniors program, getting our “Golden Sailors” on board, and on and on. “Many hands make 1) Commodore’s Corner light work!” 2) June 14 Membership Meeting – FAMILY NIGHT! First on the agenda for the year is FAMILY NIGHT. Come on out 3) Commodore’s Celebration Photos and Awards and bring the kids for a night of fun for everyone. 4) Renew Your Membership Today! I look forward to seeing each and every one of you this year! 5) Summer Cruising – Helpful Links for San Diego Info Fair winds! 6) 2011 AYC Club Champion – Martin Lorch! Emory 7) On Sailing – A Story….and a Challenge June Membership Meeting 8 ) Fleet of the Month – Catalina 22 6/14 – Family Night 9) For Sale! Want Ads! June 2, 2011 4:18 am Commodore’s Corner Join us for Arizona Yacht Club Family Night at the June meeting.
    [Show full text]
  • The Sailing Magazine for the Rest of Us
    The sailing magazine for the rest of us. 10 00 00 $8 (Canada $8 CDN) 10 0 62825 97035 7 goodoldboat.com Issue 128 September/October 2019 Automatic/Manual Inflatable PFD USCG Approved Type V with Type II Performance! Full 35 lbs buoyancy! Comfortable, low profile, with wide neoprene neckline. Universal sizing, fits 30"-65" chest. Hi-Vis inflation chamber. Durable 400 denier nylon. Super bright retro-reflective areas on front and a high-visibility BEACON logo on the back. H Reg 179.99 HAMILTON SAVE $ 99 $30 NEW! 149 ea Pre-order MARINE Part# Color Order# ™ HMI-BCNI35OG Orange/Gray 773536 today! HMI-BCNI35BG Blue/Light Gray 773535 BOATERS' STORE! Moisture Absorber Dries air in cabins, lockers, closets, rooms, basements and other enclosed State-of-the-art line areas. Super-dry concentrated pellet of premium coatings, formula absorbs up to 50% more adhesives and putties. moisture than flake formulas. Search# SYT- $ 29 7 ea MK-6912 Order# 144114 Hamilton Wayne Photo by Tea Tree Power® Mold & Mildew Eliminator Non-toxic, bio-degradable. Blended from 100% Australian tea tree oil. Available in gel or spray. Tarps Starting At • Lightweight Blue 3 GRADES, $ 99 • Premium White 27 SIZES! 17 ea • Super Heavy Duty Silver HAMILTON Search# FOR-77020 Search# STT- Premium 7 Mil. White Oil Absorbent Sheets Shrink Wrap Each 15" x 19" sheet CAN HELP! absorbs 13 to 25 times Some sizes are available its weight in oil, fuel Many Hamilton Marine employees maintain in clear and blue. Shrink and other hydrocar- their own boats. And there is no better teacher wrap accessories are also bons.
    [Show full text]
  • Lexique Nautique Anglais-Français
    ,Aa « DIX MILLE TERMES POUR NAVIGUER EN FRANÇAIS » Lexique nautique anglais français© ■ Dernière mise à jour le 15.5.2021 ■ Saisi sur MS Word pour Mac, Fonte Calibri 9 ■ Taille: 3,4 Mo – Entrées : 10 114 – Mots : 180 358 ■ Classement alphabétique des entrées anglaises (locutions ou termes), fait indépendamment de la ponctuation (Cet ordre inhabituel effectué manuellement n’est pas respecté à quelques endroits, volontairement ou non) ■ La lecture en mode Page sur deux colonnes est fortement suggérée ■ Mode d’emploi Cliquer sur le raccourci clavier Recherche pour trouver toutes les occurrences d’un terme ou expression en anglais ou en français AVERTISSEMENT AUX LECTEURS Ce lexique nautique anglais-français est destiné aux plaisanciers qui souhaitent naviguer en français chez eux comme à l’étranger, aux amoureux de la navigation et de la langue française; aux instructeurs, moniteurs, modélistes navals et d’arsenal, constructeurs amateurs, traducteurs en herbe, journalistes et adeptes de sports nautiques, lecteurs de revues spécialisées, clubs et écoles de voile. L’auteur remercie les généreux plaisanciers qui depuis plus de quatre décennies ont fait parvenir corrections et suggestions, (dont le capitaine Lionel Cormier de Havre-Saint-Pierre qui continue à fidèlement le faire) et il s’excuse à l’avance des coquilles, erreurs et doublons résiduels ainsi que du classement alphabétique inhabituel ISBN 0-9690607-0-X © 28.10.19801 LES ÉDITIONS PIERRE BIRON Enr. « Votre lexique est très apprécié par le Commandant Sizaire, autorité en langage maritime. Je n’arrive pas à comprendre que vous ne trouviez pas de diffuseur en France pour votre lexique alors que l’on manque justement ici d’un ouvrage comme le vôtre, fiable, très complet, bien présenté, très clair.
    [Show full text]
  • LEXIQUE NAUTIQUE ANGLAIS-FRANÇAIS – 2E ÉDITION, NUMÉRIQUE, ÉVOLUTIVE, GRATUITE
    Aa LEXIQUE NAUTIQUE ANGLAIS-FRANÇAIS – 2e ÉDITION, NUMÉRIQUE, ÉVOLUTIVE, GRATUITE « DIX MILLE TERMES POUR NAVIGUER EN FRANÇAIS » ■ Dernière mise à jour le 19 octobre 2017 ■ Présenté sur MS Word 2011 pour Mac ■ Taille du fichier 2,3 Mo – Pages : 584 - Notes de bas de page : 51 ■ Ordre de présentation : alphabétique anglais ■ La lecture en mode Page sur deux colonnes est recommandée Mode d’emploi: Cliquer [Ctrl-F] sur PC ou [Cmd-F] sur Mac pour trouver toutes les occurrences d’un terme ou expression en anglais ou en français AVERTISSEMENT AUX LECTEURS Ouvrage destiné aux plaisanciers qui souhaitent naviguer en français chez eux comme à l’étranger, aux instructeurs, modélistes navals et d’arsenal, constructeurs amateurs, traducteurs en herbe, journalistes et adeptes de sports nautiques et lecteurs de revues spécialisées. Il subsiste moult coquilles, doublons et lacunes dont l’auteur s’excuse à l’avance. Des miliers d’ajouts et corrections ont été apportés depuis les années 80 et les entrées sont dorénavant accompagnées d’un ou plusieurs domaines. L’auteur autodidacte n’a pas fait réviser l’ouvrage entier par un traducteur professionnel mais l’apport de généreux plaisanciers, qui ont fait parvenir corrections et suggestions depuis plus de trois décennies contribue à cet ouvrage offert gracieusement dans un but strictement non lucratif, pour usage personnel et libre partage en ligne avec les amoureux de la navigation et de la langue française. Les clubs et écoles de voile sont encouragés à s’en servir, à le diffuser aux membres et aux étudiants. Tous droits réservés de propriété intellectuelle de l’ouvrage dans son ensemble (Copyright 28.10.1980 Ottawa); toutefois la citation de courts extraits est autorisée et encouragée.
    [Show full text]
  • Watkins 27 Pg8 GOOD OLD BOAT Inspiring Hands-On Sailors
    Composting Heads pg28 | Exploring Lasqueti Island pg36 | Review: Watkins 27 pg8 GOOD OLD BOAT Inspiring hands-on sailors 06 GoodOldBoat.com $8.00 US $8.00 CAN 06 Issue 132: May/June 2020 0 62825 97035 7 Odyssey HD Trinidad HD Hull Defense Hull Defense Multi-Season Ablative Multi-Season Hard Antifouling Bottom Paint Bottom Paint Solvent-based, 45.7% High 53.3% copper load, high copper content. excellent in all conditions. Smooth, durable finish. Hard, durable, long-lasting H Fast-Dry Technology. VOC finish. Fast-Dry Technology. HAMILTON compliant, compatible Compatible over hard finishes. over most finishes. 50 State VOC compliance. NEW HD bottom paint features the exclusive Pettit HD Hull Defense LIMITED 18 Month Warranty! MARINE Macerator Pump Manual Compact Toilet FREE CATALOG! 11.5 GPM. Brass and stainless steel internal 15.75" L x 13.4" H x 17.75" W. Features “lock- 376 full color pages, parts and pump body in thermo polymer with unlock” function for comfort and safety. Plug and a long lasting impeller. Inlet port 1.5" and play/interchangeable with other manual compact chock full of stuff outlet 1".12V. toilet models. boaters want. Request your copy today! $ 99 $ 99 117 ea 141 ea ALB-03-01-005 ALB-07-01-001 Order# 775155 Order# 775151 Totally submersible, RescueME EPIRB1 silent running and vibra- tionless. Ignition pro- Category II with GPS Bilge Pumps tected, water cooled, no Measuring 7" x 3.9" x 3.5", burnout when run dry. the world’s most compact NEW! HUGE EPIRB is easily stowed for SElection! emergencies.
    [Show full text]
  • Columbia 30 Sport Sailor – Silent Way
    Columbia 30 Sport Sailor – Silent Way Make: Columbia Boat Name: Silent Way Model: 30 Sport Sailor Hull Material: Fiberglass Length: 30 ft Draft: 7 ft Price: $ 49,500 Number of Engines: 1 Year: 2005 Fuel Type: Diesel Condition: Used Number: 5159571 Location: Seattle, WA, United States Silent Way A turnkey race-ready 2005 Columbia 30 Sport Yacht, beautifully built in the United States of America and designed by the distinguished Tim Kernan. A platform that is just as at home offshore as she is racing or day sailing on your local bay or lake - with a PHRF NW rating of 84 Silent Way fits into a competitive and fun rating band. Inboard diesel, retractable sprit and A- sail, open transom and carbon rig (No Backstay Needed!) and you can even cruise or daysail comfortably with friends and family with her large sit in cockpit and ample interior. Sail Northwest 7001 Seaview Ave NW, ste 140, Seattle, WA 98117, United States Toll-free: 877-213-7441 Tel: 206 286 1004 [email protected] http://sailnorthwest.com "This boat is all about blistering performance and simple, practical accommodations. If you really like to sail fast, and your cruising isn't about all the comforts of home, it's worth going for a ride aboard the new Columbia 30." Cruising World Measurements LOA: 30 ft Ballast: 1400 lb LWL: 27 ft Displacement: 3900 lb Beam: 9 ft 6 in Min. Draft: 2 ft Max Draft: 7 ft Propulsion Engine #1 Engine Make: Yanmar Engine Year: 2005 Engine Model: 1GM Hours: unknown Primary Engines: Inboard Power: 9 hp Drive Type: Sail Drive Additional Information Sails • North 3DL 680 furling jib with sock, brand new last season.
    [Show full text]
  • Intercom MEMBER Official Newsletter of the Interlake Sailing Class Association February 2006
    The Intercom MEMBER Official Newsletter of the Interlake Sailing Class Association www.interlakesailing.org February 2006 Happy 70th, Interlake! Interlake #1 sailing on Sandusky Bay circa 1936 The Intercom 2 Fellowship – the ISCA provides officers and a web From the President site to meet the needs of its members. The Class helps to coordinate events and communications so By Kevin Bracy that we all have fun on the water. HAPPY NEW YEAR! Thanks for your support! I am looking forward to seeing your name on the rolls of membership for 2006. Old man time has crossed All this talk of sailing is making me anxious to get the threshold once again and the 2006 Sailing Season started. I hope to see you all at we’re headed towards another many of the events scheduled at our various Fleets. There season of fun and games on is something for everyone and if you’d like to see and off the water. As this something else, let us know! issue of the Intercom is going Warm breezes and calm seas! to the presses, the Fleet Captains will be completing their meeting to establish the Traveler’s Series for 2006. Be sure to mark your calendars with all the dates and not just for the races! Interlake Midwinters Come join your fellow sailors for the great meals, the tall tales (very few fish involved), and the camaraderie that March 3-5, 2006 you can only find among others those that enjoy the wind and the water together. Davis Island Yacht Club, Tampa Bay, Florida www.diyc.org As we cross the mid-point of the winter season (at least for those us in the further northern climes), there are Notice of Race signs of the new season ahead of us as well.
    [Show full text]
  • ABACK, LAY V THE
    LEXIQUE NAUTIQUE ANGLAIS-FRANÇAIS 2e ÉDITION, NUMÉRIQUE, ÉVOLUTIVE, GRATUITE « DIX MILLE TERMES POUR NAVIGUER EN FRANÇAIS » ■ Dernière mise à jour 30 août 2014 ■ Composé sur MS Word 2011 pour Mac ■ Taille du fichier 2,16 Mo – Pages : 573 - Notes de bas de page : 51 ■ Ordre de présentation : alphabétique anglais Mode d’emploi: Cliquer [Ctrl-F] sur PC ou [Cmd-F] sur Mac pour trouver toutes les occurrences d’un terme ou expression en anglais ou en français AVERTISSEMENT AUX LECTEUR Ouvrage destiné aux plaisanciers qui souhaitent naviguer en français, aux instructeurs, modélistes navals et d’arsenal, constructeurs amateurs, traducteurs en herbe, journalistes et adeptes de sports nautiques et lecteurs de revues spécialisées. Il subsiste moult coquilles, doublons et lacunes dont l’auteur s’excuse à l’avance. Des miliers d’ajouts et corrections ont été apportés depuis les annés 80 et les entrées sont dorénavant accompagnées d’un ou plusieurs domaines. L’auteur autodidacte n’a pas fait réviser l’ouvrage par un traducteur professionnel mais l’apport de généreux plaisanciers, qui on fait parvenir corrections et suggestions depuis plus de trois décennies, contribue à la qualité de cet ouvrage offert gracieusement dans un but strictement non commercial, pour usage personnel et libre partage en ligne avec les amoureux de la navigation et de la langue française. Les clubs et écoles de voile sont encouragés à s’en servir, à le diffuser aux membres et aux étudiants. Tous droits réservés de propriété intellectuelle de l’ouvrage dans son ensemble; toutefois la citation de courts extraits est autorisée et encouragée. « Je suis très impressionné par la taille et le contenu de votre dictionnaire et ne puis que vous féliciter pour cette oeuvre magistrale » – Marc van Campenhoudt, Directeur, Centre de recherche TERMISTI et Institut supérieur de traducteurs et interprètes.
    [Show full text]
  • December Channel 2002
    AUGUST 2003 TheCHANNEL Coconut Grove Sailing Club SKIPPER OF THE MONTH: 2003-2004 Officers Don Bailey and Committee While in architectural school, Don bought a rowboat Chairmen with a sail and dagger board and, along with a little book on sailing fundamentals, taught himself how to sail. Flag Officers Don, like the senior George Bush, had served in the Commodore ........................... Bud Price military in World War II and was then a student at Yale Vice Commodore................ Jack Hamm University. Don enticed a number of his friends to build Rear Commodore...... Vladimir Stroleny a fleet of 12’ Penguin Sailboats and they formed the Secretary ............................... Anne Platt Outer Barrier Sailing Club on Great South Bay, built a Treasurer ..................... Jeffrey Zirulnick clubhouse using a surplus Quonset hut and grew to Fleet Officers about 50 members and 50 boats. Don says they crashed Fleet Captain ........................Wil Bourne after a few years, because the membership was all single Fleet Chaplain .......... Brian C. Schofield guys and they were off to all parts of the world. His Fleet Surgeon ....... Dr. Nicolaus Martens desire to sail with friends led him to form the Hempstead Board Members Bay Sailing Club, purchase land and build a clubhouse. Gonzalo Bellini Will Pulsford The club, which is still active today, at one time had a Steve Hawkins Charles Rahn fleet of more than 50 Flying Scots. Don won the Mike Lovelady Bill Mauk coveted Alice Kimball English Traveling Fellowship award at Yale with his Yacht Club Andrea Stringos, P.C. designs and spent then next two years traveling and studying in Europe.
    [Show full text]
  • Installation Instructions - Boomkicker® Model K1000
    Installation Instructions - Boomkicker® Model K1000 Important: To avoid undue stress on the boom fitting, booms should to be fixed in the upright position. If the boom can roll about its' central axis, please contact the factory before installation. Recommended Installation Tools: Phillips Screwdriver; Fine Tooth Hacksaw; Center Punch; Rule; Variable Speed Reversible Drill and Blue Locktite. 1. Setup Boom Height: Use the main halyard to support the boom above its highest operating position (typically with the outboard end 6" (15cm) to 12" (30cm) above the horizontal.) Note: If the boom accidentally lifts approx. 10" (25cm) beyond this height, the Boomkicker releases from the boom fitting (safety feature). To prevent accidental release, restrict vang travel by either cleating the vang, restricting travel with a knot or adjusting the length of a cascade. At this time, check that the Model K1000 is correct. The min. length is 35" (89cm) pin to pin and the max. weight it can support is approx. 34 lbs. (15kg) measured at the aft end of the boom with the main sail flaked. 2. Position Boomkicker: The Boomkicker works by flexing upward and when straight, it is at the top of its travel. Install the Boomkicker with the screw head side of rod clamps facing up. With the boom height set, position the Boomkicker with fittings alongside the vang triangle to see how it fits. Position is not critical so long as it does not interfere with the vang (it is recommended that both the vang and the Boomkicker make an angle of between 30o and 45o with the boom).
    [Show full text]
  • Parts Lists by Number & Description
    Parts Lists by Number & Description C 25 800-959-7245 www.catalinadirect.com P ARTS LISTS BOOKLET Current Prices: Produce a new price list at any time. Click on the New Parts List link found at: www.catalinadirect.com > Handbooks > C-25 insure the data on our web store that is used to compile this on demand price list for you is without prior notice. We will never ship you a part that has store and early boats with as much as 38 years increased in price without calling for your ap- P ARTS LISTS CONVENTIONS A Word about the year of your boat: Abbreviations Description 76<->80 Used on boats built any year up to and <-87 Used on boats built any year from and 88-> illustrated by the examples below. ?82<->87 A caveat: Years are only approximate. Catalina work on any year model - ment. In addition: Sometimes the factory is forced an item and Catalina is forced to substitute a different item. Production changes: your hull number when you call. at the factory and the exact hull number is not - 800-959-7245 www.catalinadirect.com ORD ERING & SHIPPING Call our experienced sailors at 800/959-7245 and custom made items are not returnable. the number on the outside of your return pack- Returns sent without an RMA number will Sales Tax: will be added to shipments within be refused. California only at the current applicable tax rate. Items returned for reasons other than a defect Payment: your order. Orders pre paid by check will be Non returnable Items Custom Made Parts: - tion we need to build these product for you.
    [Show full text]
  • Sparcraft Rigging
    2010 SPARCRAFT CATALOGUE SUMMARY GROUPE LOSANGE & SPARCRAFT PRESENTATION P 2 - 8 GRAND PRIX SPARS P 9 - 12 S RANGE MASTS P 13 - 28 FURLING MASTS (F RANGE) P 29 - 32 ONE DESIGN MASTS P 33 - 34 MULTI-HULLS MASTS - CATAMARAN BEAMS P 35 - 38 FURLING & REEFING SYSTEMS P 39 - 40 STANDARD / RACING / GRAND PRIX BOOMS www.sparcraft.com P 41 - 47 FACSLIDES- BATTEN CARS SYSTEMS P 48 SPINNAKER POLES P 49 - 52 BOWSPRITS P 53 CODE ZERO AND GENNAKER FURLERS P 54 VANGS & BOOMKICKERS P 55 - 58 HEADSTAY SYSTEMS - TUFF LUFF P 59 - 60 LIGHTS P61 - 64 RUNNING & STANDING RIGGING P 65 - 68 MASTS - RIGGING Four joint companies, all specialized in marine equipment, form the Losange Group: Facnor (furling and reefing systems), Sparcraft (mast & spars), Sparcraft-US (located in the USA) and Sparcraft Rigging. The activity of the subsidiaries being com- plementary, the Losange Group is able to offer a full mast/rigging/furling system package and remains an advantageous partner for boat builders, dealers and charter sailing companies. www.groupe-losange.com INNOVATION & SYNERGY he Losange Group, focusing on a long-term based development, has become one of the leaders in the worldwide marine industry. This pole position results from great involve- Tment in innovation – supported by an engineering synergy (design and development centre) – and from a constant dialogue with customers. A wide distribution network in France and abroad also explains this successful growth. MASTS & HARDWARE ■ SPARCRAFT : For over 40 years, Sparcraft has been associated with technical excellence and innovation in desi- gn and production of high quality masts, booms and deck equipment.
    [Show full text]