DOCSLIB.ORG

Dolphin CT60 Mobile Computer User's Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Dolphin CT60 Mobile Computer User's Guide Dolphin™ CT60 Mobile Computer powered by Android™ 7 User Guide Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selec- tion and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this doc- ument may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2018 Honeywell International Inc. All rights reserved. Web Address: www.honeywellaidc.com Trademarks Google, Google Play store, Google Pay and Android are trademarks of Google LLC. Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell. microSD is a registered trademark of SD-3C, LLC. Qualcomm and Snapdragon are registered trademarks or trademarks of Qualcomm Incorporated in the United States and/or other countries. Other product names or marks mentioned in this document may be trademarks or registered trademarks of other compa- nies and are the property of their respective owners. Patents For patent information, refer to www.hsmpats.com. TABLE OF CONTENTS Customer Support ........................................................................................................................ ix Technical Assistance ............................................................................................................. ix Product Service and Repair ................................................................................................ ix Limited Warranty .................................................................................................................... ix Chapter 1 - About the Computer Features...................................................1 About the Dolphin CT60 Mobile Computer ......................................................................... 1 Model Overview ........................................................................................................................ 1 Features of the CT60.............................................................................................................. 2 About the Battery ........................................................................................................................... 4 Charge the Battery Before Use........................................................................................... 4 Replace the Battery................................................................................................................. 4 About the Battery Status....................................................................................................... 6 Change the Battery Status LED Behavior...................................................................... 7 Check the Battery Level and Usage ................................................................................. 8 About Battery Life and Conservation .............................................................................. 8 Battery Recommendations and Safety Precautions ................................................. 9 Enable Airplane Mode ........................................................................................................... 9 Power On the Computer ...........................................................................................................10 Welcome Screen.................................................................................................................... 10 Unlock the Screen....................................................................................................................... 10 Change the Screen Lock to Protect the Computer........................................................ 10 Select a Touch Screen Profile to Optimize Performance............................................. 11 Configure the Screen Backlight ............................................................................................ 12 About the Good Read LED....................................................................................................... 12 Dolphin CT60 Mobile Computer iii About the Audio Features.........................................................................................................12 Adjust Speaker Volume.......................................................................................................13 Enable Vibrate Mode............................................................................................................13 Audio Settings ........................................................................................................................14 Insert a microSD Card................................................................................................................15 How to Transfer Files..................................................................................................................18 Configure USB Connection and Transfer Files .........................................................18 Accessories for the Computer.................................................................................................18 Chapter 2 - About the User Interface and Applications......................... 21 About the User Interface...........................................................................................................21 Navigation and Function Buttons ..................................................................................22 About Status Bar Icons .......................................................................................................23 Remap a Button .....................................................................................................................23 Restore Default Button Action .........................................................................................24 View and Manage Notifications ......................................................................................24 Open Quick Settings ............................................................................................................24 Customize the Home Screen ............................................................................................25 Customize the Favorites Tray ...........................................................................................25 Use Google™ Search.............................................................................................................25 About Screen Gestures .......................................................................................................26 Set the Time Zone..................................................................................................................26 About Honeywell Applications................................................................................................27 Applications You Can Download to the Mobile Computer..........................................28 About Honeywell Enterprise Browser.....................................................................28 About Honeywell Launcher ........................................................................................28 About Enterprise Terminal Emulator......................................................................29 Unlock Developer Options .......................................................................................................29 Chapter 3 - Use the Image Engine .............................................................. 31 About the Image Engine ...........................................................................................................31 About the Scan Wedge Feature .......................................................................................31 Change the Scanner Settings.................................................................................................32 iv Dolphin CT60 Mobile Computer Restore Default Scan Settings .........................................................................................32 Default Scan Settings ..........................................................................................................33 Data Processing Settings.............................................................................................33 Symbology Settings .......................................................................................................34 Decode Settings ..............................................................................................................35 Imager Settings ...............................................................................................................36 Trigger Settings................................................................................................................36 Notification Settings......................................................................................................36 Add a Scan Setting Profile..................................................................................................37
Load more

Recommended publications
  • Useful Facts About Barcoding
    Useful Facts about Barcoding When Did Barcodes Begin? (Part 1) A barcode is an optical machine-readable representation of data relating to the object to which it is attached. Originally barcodes represented data by varying the widths and spacing’s of parallel lines and may be referred to as linear or one-dimensional (1D). Later they evolved into rectangles, dots, hexagons and other geometric patterns in two dimensions (2D). Although 2D systems use a variety of symbols, they are generally referred to as barcodes as well. Barcodes originally were scanned by special optical scanners called barcode readers; later, scanners and interpretive software became available on devices including desktop printers and smartphones. Barcodes are on the leading edge of extraordinary things. They have given humans the ability to enter and extract large amounts of data in relatively small images of code. With some of the latest additions like Quick Response (QR) codes and Radio-frequency identification (RFID), it’s exciting to see how these complex image codes are being used for business and even personal use. The original idea of the barcode was first introduced in 1948 by Bernard Silver and Norman Joseph Woodland after Silver overheard the President of a local food chain talking about their need for a system to automatically read product information during checkout. Silver and Woodland took their inspiration from recognizing this rising need and began development on this product so familiar to the world now. After several attempts to create something usable, Silver and Woodland finally came up with their ”Classifying Apparatus and Method” which was patented on October 07, 1952.
    [Show full text]
  • Programming Guide 1400 10Th Street Plano, TX 75074 0308 US CCD LR Programming Guide Wasp Barcode Technologies
    Barcode Scanning Made Easy Wasp Barcode Technologies Programming Guide 1400 10th Street Plano, TX 75074 www.waspbarcode.com 0308 US CCD LR Programming Guide Wasp Barcode Technologies Please Read Note: The Wasp® WLR8900 Series Scanners are ready to scan the most popular barcodes out of the box. This manual should only be used to make changes in the configuration of the scanner for specific applications. These scanners do not require software or drivers to operate. The scanner enters data as keyboard data. Please review this manual before scanning any of the programming barcodes in this manual. Tech Tip If you are unsure of the scanner configuration or have scanned the incorrect codes, please scan the default barcode on page 7. This will reset the scanner to its factory settings. Check Version Productivity Solutions for Small Business that Increases Productivity & Profitability • Barcode, data colection solutions • Small business focus • Profitable growth since 1986 • Over 200,000 customers • Business unit of Datalogic SPA © Copyright Wasp Barcode Technologies 2008 No part of this publication may be reproduced or transmitted in any form or by any Wasp® Barcode Technologies means without the written permission of Wasp Barcode Technologies. The information 1400 10th Street contained in this document is subject to change without notice. Plano, TX 75074 Wasp and the Wasp logo are registered trademarks of Wasp Barcode Technologies. All other Phone: 214-547-4100 • Fax: 214-547-4101 trademarks or registered trademarks are the property of their respective owners. www.waspbarcode.com WLR8900_8905Manual0308_sm.A0 6/25/08 3:38 PM Page 1 Table of Contents Chapter 1.
    [Show full text]
  • 520-2D Manual
    Warning: This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. This manual contains confidential and proprietary information and is copyrighted. All rights reserved. No part of this manual may be photocopied or reproduced in any form without the prior written consent of Worth Data® Inc. PROPOSITION 65 WARNING: This product, its packaging, and/or components may contain chemicals known to the state of California to cause cancer or birth defects or other reproductive harm Worth Data, Inc. USA Headquarters 623 Swift Street Santa Cruz, CA 95060 USA Phone: 1-800-345-4220 • 831-458-9938 Fax: 831-458-9964 Email: [email protected] www.worthdata.com Table of Contents Introduction Chapter 1 Installation ..................................................................................................................1-1 Components of 520-2D Reader .....................................................................................................................................1-1
    [Show full text]
  • ICR803 Bar Code Scanner
    BAR CODE MANUAL ICR 803 Bar Code Scanner Using This Manual This manual contains bar codes used to program the ICR803. For initial setup, product identification, and general product information, please refer to the following manuals: ICR803 Quick Start Manual ICR803 Command & Communication Guide Plug and Play Bar Codes Plug and Play bar codes provide instant engine set up for commonly used interfaces. Please note that the ICR803 interfaces are configured by the factory at time of order. These bar codes are therefore used to default the scanner to get back to the factory setup. RS-232 The RS-232 Interface bar code is used when connecting to the serial port of a PC or terminal. The following RS-232 Interface bar code also programs a carriage return (CR) and a line feed (LF) suffix, baud rate, and data format as indicated below: Option Setting Baud Rate 115200 bps Data Format 8 data bits, no parity bit, 1 stop bit RS-232 Interface USB HID Scan the following code to default the USB version of the ICR803 for USB HID bar code imagers. Scanning this code changes the terminal ID to 131. USB HID Bar Code Imager ICR803 Bar Code Manual – Rev A – 04/2007 - 2 - USB COM Port Emulation Scan the following code to program the USB version of the ICR803 to emulate a regular RS-232 based COM port. If you are using Microsoft Windows, you will need to install the USB Driver for the scanner. ICR803 Bar Code Manual – Rev A – 04/2007 - 3 - ICR803 Bar Code Manual – Rev A – 04/2007 - 4 - ICR803 Bar Code Manual – Rev A – 04/2007 - 5 - ICR803 Bar Code Manual – Rev A – 04/2007 - 6 - Good Read Indicators ICR803 Bar Code Manual – Rev A – 04/2007 - 7 - .
    [Show full text]
  • CR6000 Configuration Guide 4-29-2020
    CONFIGURATION GUIDE Configuration barcodes generated based on current firmware versions CR6000D036894_01 CR6000 Configuration Guide 4-29-2020 www.codecorp.com User Manual YouTube.com/codecorporation Table of Contents Direct Part Mark Reading Mode Setting.................................................................................................................. 7 DPM Auto Mode - Default.................................................................................................................................................................... 7 (A2) DPM Dark Field (Dot Peen 15-45 Degrees)....................................................................................................................................... 7 (A3) DPM Dark Field (Dot Peen 15-45 Degrees/Laser-Etched 90 Degrees)............................................................................................ 7 (A4) DPM Dark Field (Laser-Etched 90 Degrees)....................................................................................................................................... 7 (B1) DPM Diffuse Bright Field (Dot Peen 90 Degrees)............................................................................................................................. 7 (B2) DPM Diffuse Bright Field (Dot Peen/Laser-Etched 90 Degrees)....................................................................................................... 7 (B3) DPM Diffuse Bright Field (Laser-Etched 90 Degrees)......................................................................................................................
    [Show full text]
  • CK65 Series Mobile Computer User Guide, Powered By
    CK65 Series Mobile Computer powered by Android™ User Guide Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selec- tion and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this doc- ument may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2019 Honeywell International Inc. All rights reserved. Web Address: www.honeywellaidc.com Trademarks Google and Android are trademarks of Google LLC. Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell. microSD is a registered trademark of SD-3C, LLC. Qualcomm and Snapdragon are registered trademarks or trademarks of Qualcomm Incorporated in the United States and/or other countries. Other product names or marks mentioned in this document may be trademarks or registered trademarks of other compa- nies and are the property of their respective owners. Patents For patent information, refer to www.hsmpats.com. TABLE OF CONTENTS Customer Support ....................................................................................................................... vii Technical Assistance ............................................................................................................vii Product Service and Repair ..............................................................................................
    [Show full text]
  • GT2022 2D Imager Barcode Scanner Configuration Guide
    GT2022 2D Imager Barcode Scanner Configuration Guide Table Of Contents Chapter 1 Getting Started .................................................................................................................................. 1 About This Guide ..................................................................................................................................... 1 Barcode Scanning ................................................................................................................................... 2 Barcode Programming ............................................................................................................................. 2 Factory Defaults ....................................................................................................................................... 3 Custom Defaults ...................................................................................................................................... 3 Chapter 2 Communication Interfaces .............................................................................................................. 4 Power-Saving Mode ................................................................................................................................ 4 TTL-232 Interface .................................................................................................................................... 5 Baud Rate ........................................................................................................................................
    [Show full text]
  • Mai Muuttunut U Uit Te Con Con Mini
    MAIMUUTTUNUT US009747482B2U UIT TE CON CON MINI (12 ) United States Patent ( 10 ) Patent No. : US 9 ,747 ,482 B2 Gifford et al. ( 45 ) Date of Patent : Aug. 29, 2017 ( 54 ) AIMER ACCESSORY FOR CAPTURING A 9 , 110 ,355 B1 8 /2015 Nourbakhsh CODED IMAGE 2010 /0134679 A1* 6 / 2010 Lin HO4N 5 / 2354 348 / 371 @ 2013 / 0013813 AL 1 / 2013 Lee (71 ) Applicant : COGNEX CORPORATION , Natick , 2013 / 0109316 A 5 / 2013 Lee MA (US ) 2014 /0071547 A13 /2014 O 'Neill et al . 2014 /0078594 AL 3 /2014 Springer @( 72 ) Inventors : Micheal Gifford , San Leandro , CA (US ) ; David James Stein , Purlear, NC (Continued ) ( US ) FOREIGN PATENT DOCUMENTS ( 73 ) Assignee: Cognex Corporation , Natick , MA (US ) EP @ 2500758 AL 9 / 2012 ( * ) Notice: Subject to any disclaimer , the term of this patent is extended or adjusted under 35 OTHER PUBLICATIONS U . S . C . 154 (b ) by 0 days . Webpage : http : / /www .scandit . com /products /case / ; 6 pages ; down (21 ) Appl. No. : 14 /682 ,072 load date Jan . 4 , 2017 . (Continued ) ( 22 ) Filed : Apr. 8 , 2015 (65 ) Prior Publication Data Primary Examiner - Seung Lee US 2016 /0300090 A1 Oct . 13 , 2016 (74 ) Attorney , Agent, or Firm - Quarles & Brady LLP (51 ) Int . Cl. GO6K 5 / 04 ( 2006 . 01) (57 ) ABSTRACT G06K 710 ( 2006 .01 ) G06K 7 / 14 ( 2006 . 01 ) An aimer accessory for a mobile device and method of use D( 52 ) U . S . CI. is provided . The accessory includes a body configured for CPC .. .. GO6K 7 / 10732 ( 2013 .01 ) ; GO6K 7 / 10831 being affixed to the mobile device . The body includes a ( 2013 .01 ) ; G06K 7 / 1443 (2013 .01 ) collimator terminating with a grating disposed in a distal ( 58 ) Field of Classification Search portion thereof.
    [Show full text]
  • EBS-260 Barcode Options
    EBS-260 HANDJET PRINTER BARCODE OPTIONS EBS-260 HANDJET PRINTER BARCODE OPTIONS BARCODE OPTIONS Internal EAN-13: GS1(3 digits)/Manufacturer Code/Product code (Variable lengths)/Check Digit Internal EAN-8: Smaller variation of EAN-13, four digits on left side and four on right. Internal EAN-8 + EAN-2: 2 digits are added to the right-hand side of the code to indicate additional informa- tion such as issue, year, weight, manufacturer’s suggested retail price Internal EAN-8 + EAN-5: 5 digits are added to the right-hand side of the code to indicate additional informa- tion such as issue, year, weight, manufacturer’s suggested retail price Internal EAN-13 + EAN-5: 5 digits are added to the right-hand side of the code to indicate additional informa- tion such as issue, year, weight, manufacturer’s suggested retail price Internal EAN-13 + EAN-2: 2 digits are added to the right-hand side of the code to indicate additional informa- tion such as issue, year, weight, manufacturer’s suggested retail price Internal Code25 Industrial: Displays digits 0-9, quite big, infrequently used, no fixed length Internal Code 25 Interleaved: (AKA code 2 of 5 Interleaved) Displays digits 0-9, much smaller than industrial code 25. Only displays even number of digits, for odd begin with a zero. Internal 2D: Data Matrix: Text or numerical data. Must start with a 1, the number after the 1 is the applica- tion id (AI) Internal GS1-128 (UCC/EAN-128): Used for goods and palettes in commerce and industry, 14 digits, long it can be followed by a 6 digit year after an (AI) Example: (01)01234567890128(15)YYMMDD Internal Code 128: Has 3 subtypes, A, B & C.
    [Show full text]
  • UPU Standards Glossary
    UPU standards glossary Date of approval of this version: 26 February 2014 UPU standards glossary UPU standards are updated in their entirety. Each update results in a new version, indicated by the version number following the number of the standard. Before using this document, please check in the Catalogue of UPU Standards that it is still valid. The Catalogue is freely available on the UPU website at www.upu.int. © UPU 2014 – All rights reserved i Disclaimer This document contains the latest information available at the time of publication. The Universal Postal Union offers no warrants, express or implied, regarding the accuracy, sufficiency, merchantability or fitness for any purpose of the information contained herein. Any use made thereof is entirely at the risk and for the account of the user. Warning – intellectual property The Universal Postal Union draws attention to the possibility that the implementation of this standard might involve the use of a claimed intellectual property right. Recipients of this document are invited to submit, with their comments, notification of any relevant rights of which they are aware and to provide supporting documentation. As of the date of approval of this standard, the Universal Postal Union had not received such notice of any intellectual property which might be required to implement this standard, other than what is indicated in this publication. Nevertheless, the Universal Postal Union disowns any responsibility concerning the existence of intellectual property rights of third parties, embodied fully or partly, in this Universal Postal Union standard. Copyright notice UPU, 2014. All rights reserved. This document is copyright-protected by the UPU.
    [Show full text]
  • Socketscan® S850
    SOCKETSCAN® S850 Thin, Small & Light - Great for one-handed solutions The Socket Mobile S850 is a fast-scanning 2D imager barcode scanner with Bluetooth® wireless technology. Small, thin and easy to use, the scanner is optimized for attaching to mobile devices, enabling one-handed operation. The S850 can scan barcodes printed on labels or displayed on device screens. It reads all the most popular 2D barcodes and is perfect for retail point of sale, inventory management, sales order entry, field service, and other mobile business applications. Approximately the same size as a credit card, measuring less than ½ inch (1.27cm) thick and weighing less than two ounces, the S850 is one of the smallest and lightest barcode scanners available in the market today. The S850 slips neatly into your pocket and fits comfortably in the palm of your hand when attached to a smartphone. Certified by Apple® for iOS devices (iPad®, iPhone®, iPod Touch® devices) and compatible with Android and Windows® Features • Bluetooth Wireless Technology - Connects easily to a wide range of Bluetooth enabled smartphones, tablets, notebook and desktop computers • Certified by Apple® for iOS devices – Guaranteed Compat- ibility - With our SDK integrated in over 700+ applications, Socket Mobile scanners are one of the most natively integrated Front LED Indicator scanners available today. Socket Mobile Scanners are also 100% compatible with any application out-of-the-box in HID (key- Power Button board emulation) mode. Scan Button • Compatible with all Android and Windows
    [Show full text]
  • MW6 Barcode .NET Control Manual
    Contents 1 Table of Contents Foreword 0 Part I Introduction 3 Part II Installation 3 1 Trial V.e..r.s..i.o..n.......................................................................................................................... 3 2 Full Ve..r.s..i.o..n........................................................................................................................... 5 Part III How to Distribute It 6 Part IV Reference Guide 6 1 Proper.t.i.e..s.............................................................................................................................. 6 BackColor Prop...e..r..t.y.. ................................................................................................................................................ 6 BarColor Prope..r..t.y.. ................................................................................................................................................... 6 BarHeight Prop..e..r..t.y.. ................................................................................................................................................. 6 BearerBarType.. .P..r..o..p..e...r.t..y.. ....................................................................................................................................... 7 BorderWidth P.r.o...p..e..r..t.y.. ............................................................................................................................................ 7 CheckDigit Pro.p...e..r..t.y.. ..............................................................................................................................................
    [Show full text]