Bar Code Scanner Comparison Chart

Total Page：16

File Type：pdf, Size：1020Kb

Bar Code Scanner Comparison Chart Description Programmed Programmed Trigger vs. Interface Comments by Mfg. by User Triggerless Metrologic MS9520 Code 39, Codabar, UPC, EAN, Code Code 11, MSI Triggerless PS/2 or USB Comes with stand Voyager® Laser Scanner 128, Code 93, Interleave 2 of 5 Metrologic MS9540 Code 39, Codabar, UPC, EAN, Code 11, MSI Trigger PS/2 or USB Comes with stand Voyager CG® Laser Scanner Code 128, Code 93, Interleave 2 of 5 PSC QuickScan® 6000 Plus Code 39, UPC, Code 128, Codabar Trigger PS/2 Stand sold separately Laser Scanner Interleave 2 of 5, Code 93, MSI, EAN, JAN, Pharmacode 39 Datalogic Gryphon™ Code 39, Interleave 2 of 5, Codabar, Code 93, Trigger PS/2 Wireless scanner, M100 Wireless Scanner Code 128, UPC, EAN MSI, Code 11 works up to 50 feet away Datalogic Gryphon™ Code 39, Interleave 2 of 5, Codabar, Code 93, Trigger PS/2 Stand sold separately D100 Scanner Code 128, UPC, EAN MSI, Code 11 Metrologic MS9535 Voyager Code 39, Codabar, UPC, EAN, Code Code 11, MSI Trigger PS/2 or USB Wireless scanner, works up to BT™ Wireless Scanner 128, Code 93, Interleave 2 of 5, RSS 33 feet away, will not work on Macs with USB Port HHP Imageteam™ Code 39, Codabar, Code 93, Code 128, Follet, ISBN Trigger PS/2 or USB Stand sold separately, 3800 Laser Scanner Interleave 2 of 5, Code 11, or ADB also reads Follett UPC, EAN, JAN, RSS Metrologic MS6720 Code 39, Codabar, UPC, EAN, Code Code 11, MSI Triggerless PS/2 or USB Comes with stand Omni-directional Scanner 128, Code 93, Interleave 2 of 5 PSC QuickScan® 2500 Code 39, UPC, Code 128, Interleave Codabar Trigger PS/2 or USB Stand sold separately Laser Scanner 2 of 5, Code 93, MSI, EAN, JAN, Pharmacode 39, Code 11 Opticon LGP6125 EAN, UPC, Code 39, Codabar, — Trigger PS/2 or USB Stand sold separately CCD Scanner Interleave 2 of 5, Code 128, Code 93, MSI/Plessey, ISBN Unitech MS120 Code 39, EAN, UPC, Code 93, Codabar, Code 11, Triggerless PS/2 Decoded wand, Scanner Wand Code 128, Interleave 2 of 5 Code 32, MSI/Plessey no wedgebox required Unitech MS330 Code 39, Interleave 2 of 5, Codabar, Code 11, Trigger PS/2 or USB Stand sold separately CCD Scanner Code 128, Code 93, UPC, EAN Code 32, MSI/Plessey Unitech MS210 Code 39, Code 93, Interleave 2 of 5, Codabar, Code 11, Trigger PS/2 or USB Holder sold separately CCD Scanner Code 128 UPC, EAN, Code 32, MSI/Plessey Intermec ScanPlus™ Code 39, Interleave 2 of 5, Codabar, Code 93, Triggerless PS/2 Stand sold separately 1800 SR CCD Scanner Code 128, UPC, EAN MSI/Plessey ID Tech 51 Code 39,Interactive 2 of 5, Code 128, MSI/Plessey, ISBN, Trigger PS/2 or USB Stand Sold Separately CCD Scanner Codabar, UPC, EAN, Code 11, IATA Code 32.

Copy Link

Recommended publications

ITG Barcode Generator
ITG Barcode Generator Copyright © 2007-2018, IT Genetics. All Rights Reserved. 3 Contents Introduction 5 1 Key Fe.a..t.u..r..e..s......................................................................................................................... 5 2 System.. .R..e..q..u..i.r.e..m...e..n..t.s............................................................................................................ 6 3 Installi.n..g................................................................................................................................ 6 4 What c.a..n.. .y..o..u.. .d..o.................................................................................................................... 6 How to Generate Barcode Labels 7 1 Genera..t.e.. .L..i.s..t........................................................................................................................ 7 2 Forma.t.t.i.n..g.. .B..a..r.c..o..d..e............................................................................................................... 9 Printing Barcodes 9 1 Printin.g.................................................................................................................................. 9 2 Chang..i.n..g.. .P...r.i.n..t.e..r. .S..e..t.t.i.n..g..s.................................................................................................... 11 Selecting Label Type 11 1 Label. .T..y..p..e..s. .S...u..p..p..o..r.t.e..d........................................................................................................ 14 Symbologies
[Show full text]
Barcode Symbology Reference Guide a Guide to Assist with Selecting the Barcode Symbology
omni-id.com Barcode Symbology Reference Guide A guide to assist with selecting the barcode symbology This document Provides background information pertaining to the major barcode symbologies to allow the reader to understand the features of the codes. Barcode Symbology Reference Guide omni-id.com Contents Introduction 3 Code 128 4 Code 39 4 Code 93 5 Codabar (USD-4, NW-7 and 2OF7 Code) 5 Interleaved 2 of 5 (code 25, 12OF5, ITF, 125) 5 Datamatrix 5 Aztec Codd 6 QR Code 6 PDF-417 Standard and Micro 7 2 Barcode Symbology Reference Guide omni-id.com Introduction This reference guide is intended to provide some guidance to assist with selecting the barcode symbology to be applied to the Omni-ID products during Service Bureau tag commissioning. This document Provides background information pertaining to the major barcode symbologies to allow the reader to understand the features of the codes. This guide provides information on the following barcode symbologies; • Code 128 (1-D) • Code 39 (1-D) • Code 93 (1-D) • Codabar (1-D) • Interleave 2of5 (1-D) • Datamatrix (2-D) • Aztec code (2-D) • PDF417-std and micro (2-D) • QR Code (2-D) 3 Barcode Symbology Reference Guide omni-id.com Code 128 Code 128 is one of the most popular barcode selections. Code 128 provides excellent density for all-numeric data and good density for alphanumeric data. It is often selected over Code 39 in new applications because of its density and because it offers a much larger selection of characters. The Code 128 standard is maintained by AIM (Automatic Identification Manufacturers).
[Show full text]
Useful Facts About Barcoding
Useful Facts about Barcoding When Did Barcodes Begin? (Part 1) A barcode is an optical machine-readable representation of data relating to the object to which it is attached. Originally barcodes represented data by varying the widths and spacing’s of parallel lines and may be referred to as linear or one-dimensional (1D). Later they evolved into rectangles, dots, hexagons and other geometric patterns in two dimensions (2D). Although 2D systems use a variety of symbols, they are generally referred to as barcodes as well. Barcodes originally were scanned by special optical scanners called barcode readers; later, scanners and interpretive software became available on devices including desktop printers and smartphones. Barcodes are on the leading edge of extraordinary things. They have given humans the ability to enter and extract large amounts of data in relatively small images of code. With some of the latest additions like Quick Response (QR) codes and Radio-frequency identification (RFID), it’s exciting to see how these complex image codes are being used for business and even personal use. The original idea of the barcode was first introduced in 1948 by Bernard Silver and Norman Joseph Woodland after Silver overheard the President of a local food chain talking about their need for a system to automatically read product information during checkout. Silver and Woodland took their inspiration from recognizing this rising need and began development on this product so familiar to the world now. After several attempts to create something usable, Silver and Woodland finally came up with their ”Classifying Apparatus and Method” which was patented on October 07, 1952.
[Show full text]
Programming Guide 1400 10Th Street Plano, TX 75074 0308 US CCD LR Programming Guide Wasp Barcode Technologies
Barcode Scanning Made Easy Wasp Barcode Technologies Programming Guide 1400 10th Street Plano, TX 75074 www.waspbarcode.com 0308 US CCD LR Programming Guide Wasp Barcode Technologies Please Read Note: The Wasp® WLR8900 Series Scanners are ready to scan the most popular barcodes out of the box. This manual should only be used to make changes in the configuration of the scanner for specific applications. These scanners do not require software or drivers to operate. The scanner enters data as keyboard data. Please review this manual before scanning any of the programming barcodes in this manual. Tech Tip If you are unsure of the scanner configuration or have scanned the incorrect codes, please scan the default barcode on page 7. This will reset the scanner to its factory settings. Check Version Productivity Solutions for Small Business that Increases Productivity & Profitability • Barcode, data colection solutions • Small business focus • Profitable growth since 1986 • Over 200,000 customers • Business unit of Datalogic SPA © Copyright Wasp Barcode Technologies 2008 No part of this publication may be reproduced or transmitted in any form or by any Wasp® Barcode Technologies means without the written permission of Wasp Barcode Technologies. The information 1400 10th Street contained in this document is subject to change without notice. Plano, TX 75074 Wasp and the Wasp logo are registered trademarks of Wasp Barcode Technologies. All other Phone: 214-547-4100 • Fax: 214-547-4101 trademarks or registered trademarks are the property of their respective owners. www.waspbarcode.com WLR8900_8905Manual0308_sm.A0 6/25/08 3:38 PM Page 1 Table of Contents Chapter 1.
[Show full text]
Dataman Configuration Codes
DataMan® Configuration Codes 9/22/2015 Version 5.6.0 Legal Notices Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee. Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex Corporation makes no warranties, either express or implied, regarding the described software, its merchantability, non-infringement or its fitness for any particular purpose. The information in this document is subject to change without notice and should not be construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or the associated software. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor transferred to any other media or language without the written permission of Cognex Corporation. Copyright © 2015. Cognex Corporation. All Rights Reserved. Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as well as pending U.S.
[Show full text]
520-2D Manual
Warning: This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. This manual contains confidential and proprietary information and is copyrighted. All rights reserved. No part of this manual may be photocopied or reproduced in any form without the prior written consent of Worth Data® Inc. PROPOSITION 65 WARNING: This product, its packaging, and/or components may contain chemicals known to the state of California to cause cancer or birth defects or other reproductive harm Worth Data, Inc. USA Headquarters 623 Swift Street Santa Cruz, CA 95060 USA Phone: 1-800-345-4220 • 831-458-9938 Fax: 831-458-9964 Email: [email protected] www.worthdata.com Table of Contents Introduction Chapter 1 Installation ..................................................................................................................1-1 Components of 520-2D Reader .....................................................................................................................................1-1
[Show full text]
RS507/RS507X Product Reference Guide (En)
RS507/RS507X Hands-Free Imager Product Reference Guide 72E-120802-06 Copyright © 2020 ZIH Corp. and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/ copyright. WARRANTY: For complete warranty information, go to www.zebra.com/warranty. END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula. Terms of Use • Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. • Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. • Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. • Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages.
[Show full text]
PC-6015 Barcode Verifier
PC-6015 Barcode Verifier Point of Sale Barcode Verifier Product Summary Independently tested & certified to meet international standards, the Axicon 6015 has been specifically designed to read all linear barcodes with a width of up to 68mm (2.6”) including quiet zones. The system consists of a state of the art CCD read head and application software. Our development program means that not only will your verifier always meet the latest ISO/ ANSI standard, but also a wide range of application standards including GS1- 128 & ISBN/ISSN. A wide range of additional reporting tools is also provided with every verifier. Typical Application Smaller barcodes including all Benefits retail point of sale barcodes whether printed on labels, ISO/ANSI Verification flexible packaging, cartons, bags, Standards cans or jars. Static Scan Reflectance Installation Measurement Simply Install the software on AI Data Content Checker KFM 10F, 6-9, Koyo-cho Naka, your computer, plug in the verifier Higashinada-ku, Kobe 658-0032 and you can be confident that (For GS1-128 & GS1 Japan. your barcodes are being checked DataBar etc.) to the highest standards. Tel: +81-78-857-5447 Multi Language User Fax: +81-78-857-5443 Interface email: [email protected] http://en.munazo.us USB Connectivity Axicon 6015 Barcode Verifier SOFTWARE SPECIFICATIONS Symbologies Verified: GS1 SYMBOLOGIES: EAN-8, EAN-13 (with or without addons), ITF-14/Case Code, GS1-DataBar (all symbologies), GS1- 128, UPC-A, UPC-E (with or without addons). OTHER SYMBOLOGIES: Code 39, Code 93, Code 128, Codabar, ITF, MSI Plessey, Pharmacode (Laetus: optional extra). Application Standards: AIAG, Belgian Pharmacode (MSI), Belgian Pharmacode (Unique), CIP39, Coupon Codes (UK, USA, Euro), Code Vignette, GS1 AI Check, HIBC, ISBN/ISSN, Italian Pharmacode (IMH), LPPR, M&S, PZN, SISAC, Variable Measure Codes (Branded, Instore, Australian).
[Show full text]
D4000 Modelsp1) 5
D4000 Model SP1 ’s Guide Operator Manual P/N 002-5572 Release Version: A August 2011 RJS Technologies 701 Decatur Ave North, Suite 107 Minneapolis, MN 55427 (763) 746-8034 Phone (763) 746-8039 Fax www.rjs1.com Website Copyrights The copyrights in this manual are owned by RJS Technologies, Inc. All rights are reserved. Unauthorized reproduction of this manual or unauthorized use may result in imprisonment of up to one year and fines of up to $10,000.00 (17 U.S.C. 506). Copyright violations may be subject to civil liability. Reference RJS P/N 002-5572 Revision A (August 2011) All right reserved. ’s Guide TM Operator Models D4000 SP1 Inspector TABLE OF CONTENTS 1.0 PREFACE 1 1.1 PROPRIETARY STATEMENT 1 1.2 STATEMENT OF FCC COMPLIANCE: USA 1 1.3 STATEMENT OF FCC COMPLIANCE: CANADA 1 1.4 CE: 1 1.5 DOCUMENTATION UPDATES 1 1.6 COPYRIGHTS 1 1.7 UNPACKING AND INSPECTION 1 1.8 INSTALLING BATTERIES 2 1.9 TECHNICAL SUPPORT 2 2.0 WARRANTY 3 2.1 GENERAL WARRANTY 3 2.2 WARRANTY LIMITATIONS 3 2.3 SERVICE DURING THE WARRANTY PERIOD 3 2.4 TRADEMARKS 3 3.0 INTRODUCTION 4 3.1 WARNINGS 4 3.2 MAINTENANCE 5 TEMPERATURE SPECS 5 3.3 D4000 SP1 DESCRIPTION AND FEATURES 5 FEATURES 5 4.0 THE LASER INSPECTOR 5 FIGURE 4-1 (D4000 MODELSP1) 5 5.0 MAIN MENU SELECTIONS 6 5.1 SCAN 6 5.2 SETUP 7 5.3 STORAGE 11 5.4 STORAGE AND DATABASE 12 6.0 SCANNING SYMBOLS 14 7.0 PASS/FAIL ANALYSIS SCREEN 15 002-5572 iii RJS, Minneapolis, MN TM ’s Guide Model D4000 SP1 Inspector Operator TABLE 1 (CODE IDENTIFIERS D4000 SP1 ) 16 TABLE 2 (IDENTIFIER DESCRIPTIONS FOR PASS/FAIL ANALYSIS SCREENS)
[Show full text]
ICR803 Bar Code Scanner
BAR CODE MANUAL ICR 803 Bar Code Scanner Using This Manual This manual contains bar codes used to program the ICR803. For initial setup, product identification, and general product information, please refer to the following manuals: ICR803 Quick Start Manual ICR803 Command & Communication Guide Plug and Play Bar Codes Plug and Play bar codes provide instant engine set up for commonly used interfaces. Please note that the ICR803 interfaces are configured by the factory at time of order. These bar codes are therefore used to default the scanner to get back to the factory setup. RS-232 The RS-232 Interface bar code is used when connecting to the serial port of a PC or terminal. The following RS-232 Interface bar code also programs a carriage return (CR) and a line feed (LF) suffix, baud rate, and data format as indicated below: Option Setting Baud Rate 115200 bps Data Format 8 data bits, no parity bit, 1 stop bit RS-232 Interface USB HID Scan the following code to default the USB version of the ICR803 for USB HID bar code imagers. Scanning this code changes the terminal ID to 131. USB HID Bar Code Imager ICR803 Bar Code Manual – Rev A – 04/2007 - 2 - USB COM Port Emulation Scan the following code to program the USB version of the ICR803 to emulate a regular RS-232 based COM port. If you are using Microsoft Windows, you will need to install the USB Driver for the scanner. ICR803 Bar Code Manual – Rev A – 04/2007 - 3 - ICR803 Bar Code Manual – Rev A – 04/2007 - 4 - ICR803 Bar Code Manual – Rev A – 04/2007 - 5 - ICR803 Bar Code Manual – Rev A – 04/2007 - 6 - Good Read Indicators ICR803 Bar Code Manual – Rev A – 04/2007 - 7 - .
[Show full text]
CR6000 Configuration Guide 4-29-2020
CONFIGURATION GUIDE Configuration barcodes generated based on current firmware versions CR6000D036894_01 CR6000 Configuration Guide 4-29-2020 www.codecorp.com User Manual YouTube.com/codecorporation Table of Contents Direct Part Mark Reading Mode Setting.................................................................................................................. 7 DPM Auto Mode - Default.................................................................................................................................................................... 7 (A2) DPM Dark Field (Dot Peen 15-45 Degrees)....................................................................................................................................... 7 (A3) DPM Dark Field (Dot Peen 15-45 Degrees/Laser-Etched 90 Degrees)............................................................................................ 7 (A4) DPM Dark Field (Laser-Etched 90 Degrees)....................................................................................................................................... 7 (B1) DPM Diffuse Bright Field (Dot Peen 90 Degrees)............................................................................................................................. 7 (B2) DPM Diffuse Bright Field (Dot Peen/Laser-Etched 90 Degrees)....................................................................................................... 7 (B3) DPM Diffuse Bright Field (Laser-Etched 90 Degrees)......................................................................................................................
[Show full text]
Barcode Symbologies Included in OMEGA 3.0 Linear Bar Codes (1D
Barcode Symbologies included in OMEGA 3.0 Linear Bar Codes (1D) CodaBar 2 Widths CodaBar (2 Width), CodaBar2 Code11 Code 11, Code-11 Code 2OF5 Data Code 2 of 5 Data Logic Version Logic Code 2OF5 IATA Code 2 of 5 IATA Version (International Air Transport Association) Code 2OF5 Industry Code 2 of 5 Industry Version Code 2OF5 Code 2 of 5 Interleaved (alias ITF or Code 2/5 IL), Interleaved Code 2OF5 Matrix Code 2 of 5 Matrix (alias 2of5 Standard) Code 2OF5 Standard Code 2 of 5 (identical with Code 2 of 5 Matrix) Code 39 Code 3 of 9 alias Code-39 Code 39 Full ASCII Code 3 of 9 Extended Version (ASCII) Code 93 Code 93 Code 93 Full ASCII Code 93 Extended Version (ASCII) Code128 Code-128 all sub sets and Compressed Mode Code128A Code 128 Subset A Code128B Code 128 Subset B Code128C Code 128 Subset C EAN13 EAN-13 (also JAN or IAN), EAN13 P2 EAN-13 (also JAN or IAN) with 2 digit add-on EAN13 P5 EAN-13 (also JAN or IAN) with 5 digit add-on EAN14 EAN-14 (GTIN coded with EAN-128 symbology) EAN8 EAN-8 (also JAN or IAN) EAN8P2 EAN-8 (also JAN or IAN) with 2 digit add-on EAN8P5 EAN-8 (also JAN or IAN) with 5 digit add-on EAN128 EAN-128 alias UCC-128 alias GS1-128 Flattermarken Flattermarken GS1-128 GS1-128, identical to EAN-128 / UCC-128 GS1-DataBar GS1-DataBar Symbologies: all variants of GS1 DataBar are supported (GS1 DataBar is based upon RSS) ISBN ISBN ITF-14 ITF14, Code 2of 5 Interleaved (14 digits) LOGMARS DOD Logmars, Department of Defense Logmars MSI MSI Barcode variants with different check digits NVE-18 NVE 18 (Nummer der Versandeinheit) Pharmacode
[Show full text]