DOCSLIB.ORG

Fire Suppression Systems FIRE SYSTEMS

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fire Suppression Systems FIRE SYSTEMS Prices shown are current as of January 20, 2016. FE-36™ and Halon (Gas) Fire Suppression Systems FIRE SYSTEMS FIRE What is FE-36™? FireBottle Pull Systems with 4 foot pull cable Complete systems include a light- weight aluminum cylinder, manual actuating head, a 4 foot pull cable for remote activa- FE-36™ is DuPont's™ clean replacement for Halon. FE-36 has zero ozone depletion tion, 8 feet of aluminum tubing, bottle mounting bracket with clamps, tube fittings, and potential and performs comparably to Halon 1211, but with lower toxicity. It is stored 2 nozzles (3 nozzles with the 10 lb. system). SFI approved and SCCA legal in all cars. *See as a liquid under pressure and releases as a gas. The gas smothers the fire to disrupt the note concerning shipment of hazardous materials. combustion process. It also cools the area to prevent spontaneous reignition. FE-36 is FireBottle 5 lb. FE-36™ Pull System. .......................Part No. 2035-003 non-corrosive, leaves no residue, and requires no cleanup. Aluminum bottle measures 17.25'' long (including head) by 4'' diameter. 5 lb. SFI-Approved FireBottle 10 lb. FE-36™ Pull System. ......................Part No. 2035-007 FE-36™ Fire System 8'' Remove Before Aluminum bottle measures 18.25'' long (including head) by 5.25'' diameter. with pull cable Flight Streamer FireBottle Push Systems with push-button actuator on head Complete systems Part No. 2035-003 Part No. include a lightweight aluminum cylinder with a push-button actuator on the top of the 1100 -RBF08 actuating head. These systems also include 8 feet of aluminum tubing, bottle mounting Above: bracket with clamps, tube fittings, and 3 nozzles. SFI approved and SCCA legal in all cars. Push-Button *See note concerning shipment of hazardous materials. Actuating Head Part No. 2049 FireBottle 5 lb. FE-36™ Push-button System. ..............Part No. 2035-004 Aluminum bottle measures 17.38'' long (including head) by 4'' diameter. FireBottle 10 lb. FE-36™ Push-button System .............Part No. 2035-009 Aluminum bottle measures 20.25'' long (including head) by 5.25'' diameter. Replacement Bottles for above Push or Pull Systems * NOTE: All pressurized fire bottles 5 lb. FE-36™ Manual Replacement Bottle only ............Part No. 2035-006 are considered HAZARDOUS by 10 lb. FE-36™ Manual Replacement Bottle only ...........Part No. 2035-012 the DOT and incur an extra ship- FireBottle Halon Bottles Halon is a liquid under pressure and releases as a gas. ping charge. Hazardous items can Halon is no longer SFI approved and is currently only SCCA legal in cars registered prior only be shipped within the U.S. to January 1, 2009. Older cars may still use Halon, AFFF, or an SFI- or FIA-approved system. Note that any FireBottle Halon system will accept a newer FE-36 replacement bottle without modification. *See note concerning shipment of hazardous materials. FireBottle Accessories and Replacement Components FireBottle 5 lb. Halon Pull System. ........................Part No. 2003 Push-Button Actuating Head.......................... Part No. 2049 FireBottle 10 lb. Halon Pull System. .......................Part No. 2007 Actuating Head for Pull Cable Systems ................ Part No. 2041 5 lb. Halon Manual Replacement Bottle only .............Part No. 2006 4 foot Remote Actuating Cable (pull type) ............. Part No. 2044 10 lb. Halon Manual Replacement Bottle only ............Part No. 2012 15 foot Remote Actuating Cable (pull type) ............ Part No. 2054 FireBottle FE-36™ systems are 100% interchangeable with their Halon systems. If you Mounting Bracket for 5 lb. FireBottle with clamps...... Part No. 2053 have a FireBottle Halon system, you can convert to FE-36™ just by adding the bottle. Mounting Bracket for 10 lb. Fire Bottle with clamps .... Part No. 2056 FireBottle Replacement Nozzle (requires adapter) ...... Part No. 2042 FireBottle FE-36™ Trailer Guard These fully automatic fire suppression systems will 1 above nozzle (connects nozzle to ⁄4'' tube) . Part No. 2063 protect the contents of your trailer or race shop when you're not around. The system 1 Discharge Adapter (connects bottle head to ⁄4'' tube) Part No. 20 discharges if the temperature exceeds 155° F. Requires no electrical power. *See note 1 Brass Tee for ⁄4 inch tubing. Part No. 2064 concerning shipment of hazardous materials. 1 ⁄4 inch Aluminum Discharge Tubing, 8 foot coil ....... Part No. 2078-08 FireBottle 5 lb. Trailer Guard, covers approx. 200 cu. ft .....Part No. 2008-5 Remove Before Flight Streamer, 8'' x 1'' ................ Part No. 1100-RBF08 FireBottle 10 lb. Trailer Guard, covers approx. 400 cu. ft ....Part No. 2008-10 Bright red nylon flag is SCCA-recommended for fire bottle safety pins. Includes split ring. Automatic / Manual FE-36™ Fire Suppression Systems Fire Blanket The Fire Blanket is perfect for those small flare-ups that would be a waste of a fire extinguisher, but could quickly burn the shop down if they aren't contained right away. The 40'' x 60'' blanket resists brief exposure to 1000° F to smother small fires before they can spread. It is reusable indefinitely, which makes it much more cost-effective than most extinguishers. It also requires no cleanup afterwards! The "safety orange" blanket has two black hook-and-loop straps to keep it safely packed when 1 not in use. The straps also double as carry handles. Rolled up, it measures 16'' long x 5 ⁄2'' diameter and takes up about the same space as a 5 pound extinguisher. The chemical- resistant woven silica fibers will not rot or mildew in storage. Keep one in the shop and another near welding equipment. Fire Blanket, Safety Orange only........................ Part No. 1835-1409 Pit Pal Fire Extinguisher Cabinets Left: 2.5 lb. These sturdy aluminum cabinets These FE-36™ fire suppression systems are ideal for your trailer, shop, and race car! The Extinguisher keep your handheld fire extinguisher system can be activated manually by a pull cable, or it can activate itself automatically Cabinet or fire blanket handy on the wall of Part No. PP353 if you can't. If the temperature in the cockpit exceeds 155° F, a special thermal bulb Right: your shop or trailer. The 2.5 pound automatically discharges the system. Each system includes an aluminum cylinder (fully 5 lb. Extinguisher / size (far left) fits extinguishers up to charged with FE-36™), mounting bracket, two discharge nozzles, aluminum tubing, one Fire Blanket Cabinet 3.5'' diameter. The 5 pound size (left) manual pull cable, and a thermal head connected to the bottle by a 3 foot long flame- Part No. PP352 fits extinguishers up to 5.75'' x 4.5'' or resistant, flexible, braided stainless steel line. Requires no electrical power, so it's great our Fire Blanket above. The 5 pound for trailers and parked RVs. *See note concerning shipment of hazardous materials. size also features external mounting flanges to help support the extra weight. 5 lb. Automatic / Manual System (shown).................Part No. 2035-032 2.5 lb. Extinguisher Cabinet ........................... Part No. PP3539 Bottle measures 17.25'' long by 4'' diameter. 2.5 lb. size measures 11'' H x 3.8'' W x 3.8'' D. 10 lb. Automatic / Manual System ........................Part No. 2035-033 5 lb. Extinguisher / Fire Blanket Cabinet ............... Part No. PP352 Bottle measures 18.5" long by 5.25'' diameter. 5 lb. size measures 11'' H x 7.5'' W x 4.75'' D. 29.
Load more

Recommended publications
  • Safety in the Chemistry Lab
    Safety in the Chemistry Lab Working in the chemistry laboratory is an inter- 12. Never touch any substance in the lab un- esting and rewarding experience. During your less specifically instructed to do so by your labs, you will be actively involved from beginning teacher. to end—from setting some change in motion to 13. Never put your face near the mouth of a drawing some conclusion. In the laboratory, you container that is holding chemicals. will be working with equipment and materials that 14. Never smell any chemicals unless in- can cause injury if they are not handled properly. structed to do so by your teacher. When testing for However, the laboratory is a safe place to work if odors, use a wafting motion to direct the odors to you are careful. Accidents do not just happen, they your nose. are caused—by carelessness, haste, and disregard 15. Any activity involving poisonous vapors of safety rules and practices. Safety rules to be should be conducted in the fume hood. followed in the laboratory are listed below. Before 16. Dispose of waste materials as instructed beginning any lab work, read these rules, learn by your teacher. them, and follow them carefully. 17. Clean up all spills immediately. 18. Clean and wipe dry all work surfaces at General the end of class. Wash your hands thoroughly. 19. Know the location of emergency equip- 1. Be prepared to work when you arrive at ment (first aid kit, fire extinguisher, fire shower, the laboratory. Familiarize yourself with the lab fire blanket, etc.) and how to use them.
    [Show full text]
  • Whoosh Bottle
    Whoosh Bottle Introduction SCIENTIFIC Wow your students with a whoosh! Students will love to see the blue alcohol flame shoot out the mouth of the bottle and watch the dancing flames pulsate in the jug as more air is drawn in. Concepts • Exothermic reactions • Activation energy • Combustion Background Low-boiling alcohols vaporize readily, and when alcohol is placed in a 5-gallon, small-mouthed jug, it forms a volatile mixture with the air. A simple match held by the mouth of the jug provides the activation energy needed for the combustion of the alcohol/air mixture. Only a small amount of alcohol is used and it quickly vaporizes to a heavier-than-air vapor. The alcohol vapor and air are all that remain in the bottle. Alcohol molecules in the vapor phase are farther apart than in the liquid phase and present far more surface area for reaction; therefore the combustion reaction that occurs is very fast. Since the burning is so rapid and occurs in the confined space of a 5-gallon jug with a small neck, the sound produced is very interesting, sounding like a “whoosh.” The equation for the combustion reaction of isopropyl alcohol is as follows, where 1 mole of isopropyl alcohol combines with 4.5 moles of oxygen to produce 3 moles of carbon dioxide and 4 moles of water: 9 (CH3)2CHOH(g) + ⁄2O2(g) → 3CO2(g) + 4H2O(g) ∆H = –1886.6 kJ/mol Materials Isopropyl alcohol, (CH3)2CHOH, 20–30 mL Graduated cylinder, 25-mL Whoosh bottle, plastic jug, 5-gallon Match or wood splint taped to meter stick Fire blanket (highly recommended) Safety shield (highly recommended) Funnel, small Safety Precautions Please read all safety precautions before proceeding with this demonstration.
    [Show full text]
  • Fire Prevention Program Revised September 2018 Page 1 of 10 Obey All “No Smoking” and “No Open Flame” Signs and Postings
    FIRE PREVENTION & PROTECTION PROGRAM PURPOSE / SCOPE The purpose or goal of the Fire Extinguisher Program is to inform and train employees on preventing fires in the workplace and the proper selection and the use of fire extinguishers in the event of an incipient fire. GENERAL REQUIREMENTS Fire is a common and serious hazard in the construction industry. Each year fires take many lives, cause workers and their families to suffer, and cost millions of dollars. Fire prevention is everyone’s responsibility. Employees must do their part by observing and complying with fire-prevention regulations and procedures. Employees should report any potential fire hazard or condition that could cause a fire to their supervisor immediately. Many potential fire hazards that are commonly found on job sites include gasoline, diesel fuel, oxygen, acetylene and various other building materials. Most fires are caused by a violation of basic fire safety precautions. While proper procedures and training can minimize the chances of an accidental fire, employees must still be prepared to deal with a fire emergency should it occur. In accordance with OSHA standards, our employees must adhere to the following written Fire Prevention and Protection Program. A copy of this program shall be kept at the work place and is available for employee review. Fire extinguishers shall be readily available and located so that personnel do not have to travel more than 75 feet to reach one. On job sites, all Winger Companies, herein referred to as Winger, fire extinguishers SHALL be conspicuously located, readily accessible, and immediately available in the event of a fire for all cutting, welding and grinding operations.
    [Show full text]
  • Flinn Scientific 2019 Purchase Guide a Quick and Easy Checklist of Science Essentials
    Flinn Scientific 2019 Purchase Guide A Quick and Easy Checklist of Science Essentials Use this Purchase Guide as a handy tool for: • Taking Inventory • Order Preparation • Budget Management • Future Planning See your Flinn Scientific Catalog/Reference Manual SCIENTIFIC or visit www.flinnsci.com for product details. It’s Easy to Order Tom Trapp from Flinn Scientific! National Account Development Consultant [email protected] www.flinnsci.com/tom-trapp/sa1001 Online 402-960-5578 (mobile) www.flinnsci.com Offering personal assistance to help meet your science curriculum, supply, and lab safety needs. Email [email protected] Quality Products, Fast Delivery, Fax and Low Prices Guaranteed 1-866-452-1436 (toll free) Mail Flinn Scientific, Inc. P.O. Box 219 Batavia, IL 60510-0219 Phone 1-800-452-1261 7:30 am to 5:00 pm CT Monday through Friday Our Guarantee Flinn Scientific, Inc. guarantees that no sale is complete unless the customer is satisfied. Every item we furnish will either conform to the catalog specification, or we will ask your permission, prior to shipment, to ship an alternative product. If you find a lower published nationally advertised catalog price for an identical item, Flinn will “meet or beat” that price. Use this purchase guide containing popular product recommendations ©2019 Flinn Scientific, Inc. All Rights Reserved. to prepare your order, take inventory, and manage your budget. 1 www.flinnsci.com Flinn Scientific 2019 Purchase Guide 1 Item Rec. Item Rec. Product / Item Name Qty 2019 Price Total Product / Item Name Qty 2019 Price Total No. Qty No. Qty Safety & Personal Protection Equipment Aspirator, Water, Polypropylene AP1203 1 $ 19.30 $ - Apron, rubberized, 27" W X 36" L AP7125 30 $ 15.00 $ - Autoclave, Electric, Portable AP1004 1 $ 865.20 $ - Apron, plastic, 30" W x 36" L AP7120 30 $ 7.25 $ - ♦ Balance, Flinn Triple Beam OB2181 $ 115.00 $ - Gloves, Butyl rubber for conc.
    [Show full text]
  • Specific Lab Safety Procedure Johnson's Group
    Specific Lab Safety Procedure Johnson’s Group Last Edited: 1/18/2018 1. Purpose The purpose of this procedure is to support work practices for protecting laboratory personnel from potential health hazards in the laboratory. 1. Laboratory Safety Guidelines 1.1 GENERAL LABORATORY SAFETY • Do not eat, drink, or apply cosmetics in the lab. • Store food and drink in food designated refrigerators only. Don’t mix chemicals and food. • Tie back medium length and long hair and remove or secure dangling pieces of clothing (e.g. ties, draw-strings, headphones, etc. ) when working near flames or entangling equipment. • All accidents, no matter how minor, should be reported to the faculty/staff member supervising the laboratory. • Know the location of all safety equipment (e.g. eyewash, fire extinguisher, fire blanket, safety showers, spill kit) if available. • Keep aisles clear. • Maintain unobstructed access to all exits, fire extinguishers, electrical panels, emergency showers, and eyewashes. • Do not use corridors for storage or work areas. • Do not store heavy items above 6 feet high. • Consult with your Principal Investigator if planning to work alone or running an unattended operation. • Avoid working alone in the lab when performing high-risk operations. • Keep area clean and uncluttered; clean up area upon completion of task or at end of the day. 1.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) • Review SOP, MSDS and other hazard information to determine appropriate PPE to wear based on chemical hazards encountered. • Remove gloves when leaving the laboratory, so as not to contaminate doorknobs, etc. 1.3 ELECTRICAL SAFETY • Don’t use permanent extension cords.
    [Show full text]
  • 3.9 Fire Safety Equipment Fire Extinguishers Are Very Important
    3.9 Fire Safety Equipment 3.9.1 Fire Extinguishers Fire extinguishers are very important components of laboratory safety. Fire extinguishers are spaced and located as required by current fire codes and standards. Currently the department of Environmental Health, Safety and Risk Management performs monthly inspection and performs required maintenance on all fire extinguishers at Stephen F. Austin State University. Only use a fire extinguisher if the fire is very small and you know how to use the extinguisher safely. If you can’t put out the fire, leave immediately. Make sure you call 911 or fire department even if you think the fire is out. In laboratories, fire extinguishers should be securely located on the wall near an exit. The lab occupant should be aware of the condition of the fire extinguishers by observing them for broken seals, damages, low gauge pressure, or improper mounting. Occupants of laboratories should visually inspect lab fire extinguishers at least monthly. Units that are missing, have broken seals, low pressure or visible damage should be reported to EHSRM immediately for replacement. For fire extinguisher service, requests, training, or any questions call EHSRM at 468- 4532. 3.9.2 Fire Alarms Fire alarms are designed so that all endangered laboratory personnel and building occupants are alerted by an audible warning (in many buildings there is also visual warning). All employees/students should become familiar with the exact location of the fire alarm pull stations nearest to their laboratory. Sprinkler systems, smoke detectors and heat detectors may automatically activate the fire alarm. (This should not be considered a substitute for manual fire alarm activation.) Smoke detectors should never be tampered with and must be regularly checked for viable battery.
    [Show full text]
  • Paper Mills: Guidance on Fire Risk 2 of 41 Pages Health and Safety Executive
    Health and Safety Executive Paper mills Guidance on fire risk Paper and Board Industry Advisory Committee Health and Safety Executive This is a revision of guidance originally published in 1995. It has been prepared, in consultation with HSE, by the Paper and Board Industry Advisory Committee, which was appointed by the Health and Safety Commission as part of its formal advisory structures. The guidance represents what is considered to be good practice by the members of the Committee. It was agreed by the Commission. Following this guidance is not compulsory and you are free to take other action. But if you do follow this guidance you will normally be doing enough to comply with the law. Health and safety inspectors seek to secure compliance with the law and may refer to this guidance as illustrating good practice. The Regulatory Reform (Fire Safety Order) 2005 During the life of this document, the Regulatory Reform (Fire Safety) Order 2005 will come into force. This will repeal the Fire Precautions Act 1971 and other related legislation under which fire certificates are currently issued. It will also repeal the fire certificates themselves. At this point, general fire precautions then become the responsibility of the duty holder, who has to provide a risk assessment. This determines the general fire precautions needed and fire brigades will continue to enforce general fire precautions under the new legislation. This does not affect the advice given in the following pages except that the reader should bear in mind that the requirement for a paper mill to have a fire certificate prepared by the Fire Authority (mentioned in paragraphs 23, 55, 108, 112, 126 and 134) will be replaced by a specific requirement for the company to perform a risk assessment for fire safety.
    [Show full text]
  • NEW PRODUCTS NOW AVAILABLE Fire Safety and Signage Products Issue 01 WELCOME
    NEW PRODUCTS NOW AVAILABLE Fire Safety and Signage Products Issue 01 WELCOME Established in 1978 Jactone Products Ltd is a privately owned UK manufacturer specialising in the production and supply of a unique range of fire, safety and signage products. Our policy of continuous investment in technology and product development allows us to offer our unique brand of quality products at exceptional value. We are certified by BSI to BSI EN ISO 9001, covering all of our manufacturing operations and carry many third party approvals across our range of products. We have chosen to use BSI and LPCB approval schemes to ensure our customers have complete peace of mind. MANUFACTURER INNOVATION TECHNICAL EXPERTISE EFFICIENCY QUALITY FIRE EXTINGUISHERS MADE IN THE UK FULLY CERTIFIED Jactone Premium Range fire extinguishers The Premium Range extinguishers are are manufactured in our UK purpose built manufactured under our BS EN ISO 9001 factory in the heart of the West Midlands. quality system and they are fully certified Our advanced deep draw cylinder with third party approvals. technology produces a unique, quality fire extinguisher with a robust safety record. BRANDING A fantastic way to present and promote the corporate image of your organisation. COLOUR CODED Utilising our state of the art digital print and graphics suite we can take your Manufactured with a unique company logo and brand and create colour coding system in bespoke extinguisher header labels that accordance with the guidelines in will showcase you. BS 7863:2009. In the event of a fire, your staff will easily and quickly be able to identify the extinguisher required.
    [Show full text]
  • Flinn Scientific 5-Minute Safety Equipment Inspection
    Flinn Scientific 5-Minute Safety Equipment Inspection SCIENTIFIC Flinn Scientific has developed the “5-Minute Safety Equipment Inspection” checklist that you SAFETYFAX! can use to quickly and easily evaluate the readiness of the safety equipment in your lab. As part of the OSHA Laboratory Standard, safety equipment must be checked on a regular basis. It is also a good policy to document your inspection. If problems are found, repairs must be made promptly. For every question asked on the 5-minute safety inspection checklist, we have provided the correct procedure or policy for each piece of safety equipment shown. All inspection checklists should be compiled and a written report sent to the principal for prompt action. Answer yes or no to each question. A comment section is provided to identify any equipment that needs to be repaired or replaced. Room Number ___________________ Date ____________________ Inspector ___________________________________ 1. Do you have an ABC type fire extinguisher? ____________________________________________________ _________________________________________________________________________________________ 2. Do you have a fire blanket? __________________________________________________________________ _________________________________________________________________________________________ 3. Do you have an eyewash that treats both eyes at the same time, provides a continuous wash for 20 minutes and is supplied with water from a clean water source? _________________________________________________________________________________________
    [Show full text]
  • Laboratory Safety Manual
    Laboratory Safety Manual Environmental Health, Safety and Risk Management Department P.O. Box 6113, SFA Station Nacogdoches, Texas 75962-6113 Original 2006 Revised January 2010 Revised August 2013 Last Revision December 2018 1 Table of Contents 1. Purpose ...................................................................................................................................................................... 4 2. Responsibilities .......................................................................................................................................................... 4 2.1 The Department of Environmental Health, Safety, & Risk Management (EHSRM) .......................................... 4 2.2 College Dean ....................................................................................................................................................... 5 2.3 Department Chairs and Directors ........................................................................................................................ 5 2.4 Principal Investigators and Laboratory Supervisors ............................................................................................ 5 2.5 Laboratory Employees and Students ................................................................................................................... 6 3. General Laboratory Safety ......................................................................................................................................... 6 3.1 Standard Operating Procedures
    [Show full text]
  • 2. Whole-House Fire Blanket Protection from Wildland- Urban
    ORIGINAL RESEARCH published: 15 October 2019 doi: 10.3389/fmech.2019.00060 Whole-House Fire Blanket Protection From Wildland-Urban Interface Fires Fumiaki Takahashi* Department of Mechanical and Aerospace Engineering, Case Western Reserve University, Cleveland, OH, United States Each year, fires in the wildland-urban interface (WUI)—the place where homes and wildlands meet or intermingle—have caused significant damage to communities. To contribute to firefighter and public safety by reducing the risk of structure ignition, fire blankets for wrapping a whole house have been investigated in the laboratory and prescribed wildland fires. The fire blankets aim to prevent structure ignition (1) by blocking firebrands to enter homes through vulnerable spots (gutters, eaves, vents, broken windows, and roofs); (2) by keeping homes from making direct contact with flames of surrounding combustibles (vegetation, mulch, etc.); and (3) by reflecting thermal radiation from a large fire within close range (adjacent burning houses or surface-to-crown forest fires) for a sustained period of time. In the laboratory experiment, two-layer thin fabric assemblies were able to block up to 92% of the convective heat and up to 96% of the radiation (with an aluminized surface). A series of proof-of-concept experiments Edited by: were conducted by placing instrumented wooden structures, covered with different fire Michael John Gollner, blankets, in various fires in ascending order of size. First, birdhouse-sized boxes were University of Maryland, College Park, United States exposed to burning wood pallets in a burn room. Second, wall-and-eave panels were Reviewed by: exposed to prescribed fires climbing up slopes with chaparral vegetation in California.
    [Show full text]
  • Science Enhanced S&S Biology
    SCIENCE STANDARDS OF LEARNING ENHANCED SCOPE & SEQUENCE BIOLOGY Commonwealth of Virginia Department of Education Richmond, Virginia 2006 Copyright © 2006 by the Virginia Department of Education P.O. Box 2120 Richmond, Virginia 23218-2120 http://www.doe.virginia.gov All rights reserved Reproduction of materials contained herein for instructional purposes in Virginia classrooms is permitted. Acting Superintendent of Public Instruction Patricia I. Wright Assistant Superintendent for Instruction Linda M. Wallinger Office of Middle and High School Instructional Services James C. Firebaugh, Director Eric M. Rhoades, Science Specialist Edited, designed, and produced by the CTE Resource Center Margaret L. Watson, Administrative Coordinator Bruce B. Stevens, Writer/Editor Richmond Medical Park Phone: 804-673-3778 2002 Bremo Road, Lower Level Fax: 804-673-3798 Richmond, Virginia 23226 Web site: http://CTEresource.org The CTE Resource Center is a Virginia Department of Education grant project administered by the Henrico County Public Schools. NOTICE TO THE READER The Virginia Department of Education does not unlawfully discriminate on the basis of sex, age, race, color, religion, handicapping conditions, or national origin in employment or in its educational programs and activities. Science Enhanced Scope and Sequence – Biology Table of Contents Preface..................................................................................................................................... iv Acknowledgments..................................................................................................................
    [Show full text]