Quick Operation Guide

Getting Ready to Use the Product ● The “Wear OS by ™” app ！ must be installed. Important ● Ensure that the watch is fully charged. This Quick Operation Guide shows typical screen displays and operations. Procedures on the Procedures on the watch

・Android™ 4.4 or later (excludes Go editions) Supported mobile phones ・iOS 9.3 or later Refer to the User's Guide for details. 1 2 3 (as of December 2018) * Some functions are not available when the phone is connected to an iOS device. 1 Install the “Wear OS by Google” app. ＊ 2 Update the Developer service to the latest version. Power ＊ button 3 Update the Google app to the latest version. ＊Install the CASIO MOMENT SETTER+ app. Tap the 4 (Use the latest version. Older versions for Android Wear™ 1.x cannot be used.) Press the Power Select the button on the watch. screen. language to be * Android-only procedure. CASIO MOMENT SETTER+ is recommended, but is not essential. used.

Pairing the watch with your smartphone 1 Android settings

● Activate the ® connection on your smartphone. ！ Important ● Place the smartphone to be paired close to the watch (1 m or closer recommended). ● This description shows typical screen transitions.

1 2 3 4 5

Launch Wear OS by Google on the

smartphone. On the watch On the watch

Tap “SET IT UP”. Tap “CASIO When the pair settings screen appears, Getting your watch WSD-F20”. check the passkey and tap “PAIR”. details may continue for some time. The same passkey shown on the smartphone screen appears on the watch screen.

6 7 8 9 10

Set only the accounts to be Tap “Copy”. Enter the password Tap “DONE”. Connection is synchronized to ON and then and tap “SIGN IN”. completed. tap “Next”. follow the instructions provided on the screen.

Always make copies of the accounts. Important settings ！ product auto updates will not function. on the watch in “Pairing the watch with your smartphone 2 ”.

* The image shows the WSD-F30. Quick Operation Guide

Pairing the watch with your smartphone 1 iPhone settings

！ ● Activate the Bluetooth® connection on your smartphone. Important ● Place the smartphone to be paired close to the watch (1 m or closer recommended).

1 2 3 4 5

Launch Wear OS by Google on the smartphone. Tap “Start setup”. Tap Tap Tap “OK”. “Accept”. “Enable”.

6 7 8 9 10

Tap Tap “Pair”. Once the same code to Getting your watch Tap “Sign in”. If “Continue as “WSD-F20”. connect shown on the information may continue (account name)” is displayed, watch appears, tap “Con rm”. for several minutes. proceed to step ⑮.

11 12 13 14 15

●●●●● ●●●●●@.com

●●●●● ●●●●●@gmail.com

Tap “Use another Tap Tap “Create account”. Follow the on-screen instructions to Tap “Continue as account”. “More options”. enter your data and create the account. (account name)”. You must create a login account in Google. ！ Auto update will not function without account information.

16 17 18 19

To ensure that the product is fully functional,

●●●●● ●●●●●@gmail.com settings on the watch in “Pairing the watch with your smartphone”.

Enter the password for the created account and tap Tap “Done”. Connection is “Sign in follow the instructions provided on the screen. completed. Quick Operation Guide

Pairing the watch with your smartphone 2 Watch settings

1 Run the “Tutorial” displayed by Google.

● When the watch is paired with a terminal and ready to use, a tutorial appears several times on the watch screen. ● You should follow the steps in the tutorial at least once, as it includes important steps in preparing the OS. Swipe up Swipe up Follow the on-screen on the screen. on the screen. instructions.

* After the software update, the “Tutorial” changes in the steps below. * The software is automatically updated.

Tap “Learn more”. Swipe the screen to check the Press the Power button to Tap and hold the center of the display. Swipe back to return to display the App Menu. Use the screen to open the watch face the watch display. Check the Power button to return to the selection screen. Tap to return to display in all four directions. watch display. the watch display.

2 Update to the latest versions of the Casio apps. ● To use an iPhone, a Wi-Fi connection is required.

Power button

Press the Power Swipe down on the screen. Swipe down Tap “My Apps”. A list of the apps that can be updated button on the watch. Tap “Play Store” in the App Menu. on the screen. appears. “CASIO MOMENT SETTER+” must be updated. Updating the other apps also is recommended.

3 Smartphone and watch”. Unless you plan to use “Activity”, “Location Memory”, “Location” or “Traveler”, there is no need to set the “location information”.

Before the After the software update software update

Swipe down Tap “Settings”. In the “Settings” screen, swipe Check that “From phone on the screen. up and tap “Connectivity”. & watch” under “Location” is enabled.

* The image shows the WSD-F30. Continue with step 4 in “Pairing the watch with your smartphone 2 ”. Quick Operation Guide

This follows on from step 3 in “Pairing the watch with your smartphone 2 ”.

Pairing the watch with your smartphone 2 Watch settings

4 In “Apps”, enable all the “Permissions” for Casio apps. ● Unless you plan to use “Activity”, “Location Memory”, “Location” or “Traveler”, there is no need for “location information” permissions. ● If you do not plan to use “Location Memory”, there is no need for “Microphone” permissions. ● If you do not plan to use “Traveler”, there is no need for “Calendar” permissions.

Before the After the software update software update

Swipe down Tap “Settings”. In the "Settings" screen, tap on the screen. “ ”.

Swipe up and tap Tap Find and tap In the app permissions screen, set “Calendar”, “Contacts”,“Location”,“Microphone” and ”App permissions”. “System Apps”. “CASIO MOMENT SETTER+”. “Receive complication data” to ON. (Tap and slide the switch to the right.) * “Microphone” is displayed after Auto Update. 5 Enable the “Save daily activity records” setting. If you omit this step, you will not be able to use “TOOL: My Graph”.

With a watch face displayed, press the “TOOL” button. WSD-F30 Lower button Swipe left Tap Tap “Save daily activity WSD-F20 Upper button on the screen. “Settings”. records” and set it to ON. Tap “I agree”.

6 Enable the “Save Daily Location Info” setting. If you omit this step, you will not be able to use the “Route Display”, “Check History” or “Revisit” functions in “Location Notes”.

With a watch face displayed, press WSD-F30 Upper “MAP” button Swipe up Tap Tap “Save Daily Tap “Every 1 minute” or WSD-F20 Lower “APP” button on the screen. “Settings”. Location Info”. “Every 6 minutes”.

* The image shows the WSD-F30. Quick Operation Guide

Main Screen Transitions Before the software update

You can operate this

Notifications

You can cancel the various by swiping left or right. App Menu

This screen displays a list of the available apps.

Swipe up on the watch face display. Watch face settings These watches come Watch face with Casio original display Press watch faces that you once can switch between Touch whenever you like. Swipe right or left screen on the watch face * See “Launching/Adding apps” display. for details.

Power button

Google ™

The Voice Search screen is displayed. Hold down *See “Changing/Adding for 2 seconds original watch faces” for details. Swipe down on the watch face display.

Settings Airplane Mode You can use this setting * See “Basic voice operations” for details. Settings “Brightness Adjust- Silent Mode ment”, “Airplane Mode”, “Settings” and “Silent Mode”. Brightness Adjustment

* The image shows the WSD-F20. Quick Operation Guide

Main Screen Transitions After the software update

Google Assistant information Settings ™ Displays the screen Shows Google Settings for switching to the Assistant information Sound the Brightness ring tone Google Fit app Battery Saver Theater Airplane Mode Mode Silent Mode

Swipe down on Swipe right the watch face display. Swipe left.

Watch face display App Menu Watch face settings This screen displays a list These watches come Touch of the available apps. with Casio original screen watch faces that you can switch between whenever you like.

Tap and hold the screen

Press once * See “Launching/Adding apps” for details. Swipe up on the watch face display. *See “Changing/Adding original Power watch faces” for details. button

The Voice Search screen is displayed. Hold down for 2 seconds Notifications

the various

You can cancel by swiping left or right. * See “Basic voice operations” for details.

* The image shows the WSD-F30. Quick Operation Guide

App Launching/Adding apps

L a unching an app Addi ng an a p p

To add an app, you need to install the app on both the 1 2 smartphone and the watch. (Installation on the smartphone may not be necessary for some apps.) Press once Procedure from the smartphone Procedure from the watch

1 Categories screen 2

With a watch face Tap the app you displayed, press the want to launch. Power button once.

By on the app so that a star appears next to the app, you can assign the highest priority to the app. Tap “Play Store” and install your chosen app Tap and on the watch. hold In the Play store Install your chosen category screen, swipe app. up and tap “Wear OS by Google”.

Basic voice operations

To set an alarm

Watch face 1 display 2 Set the alarm at 7:00 am

Hold down (2 seconds or longer) Microphone You can engage in activities such as the following by holding the watch up and giving spoken With a watch face displayed, swipe right on the screen or Tap the microphone icon. instructions. hold down the Power button for at least 2 seconds.

● Writing memos and setting You can also do this without pressing any buttons by saying reminders, alarms and the timer “OK, Google”. (To use “OK Google Settings > Personalization and enable “OK Google” detection.) ● Checking your schedule ● Replying to e-mail and SNS 3 4

● Checking for information on the weather, sport, movies, etc.

● Looking up the meanings of words and converting currency

depending on the platform, device and When the set time is reached, the country. You cannot use e-mail or send watch displays the alarm screen SNS messages with an iPhone (iOS). and vibrates to let you know. * The watch alarm does not emit a sound.

* The image shows the WSD-F30. Quick Operation Guide

watch faces Changing/Adding original watch faces

Original watch faces These watches come with Casio original watch faces that you can switch between whenever you like.

NEW UPDATE ［ Frontier ］ [2-layer] Shows a map graphic as the time Choose between two styles: display background, with colors Outdoor or Daily. to indicate places you have * WSD-F30 screen visited. It shows how much fun it is to travel the world. * WSD-F30 only Outdoor Daily

[ Traveler ] ［ World time ］ [ Place ]

[ Location ] [ Multi ] [ Authentic ] [ Journey ]

Changi ng the w a t h f a c e Addi ng a w a t c h f a c e 1 Watch face 2 Select an option t o “ Fa vo rit e s ” display from the “Favorites”. (on t he w a t ch)

You can add a watch face to “Favorites” by selecting the watch face from See more watch faces.

1

With a watch face displayed, tap In the “Favorites” list, choose a and hold the center of the screen. screen you like and tap to set it.

Adding a w a t c h f a c e (on t he w a t ch) Tap “See more watch faces”. 1 2 3 2

You can swipe up or down to Tap "See more watch faces". Swipe up and tap “Get Select the watch face you choose your preferred face. more watch faces”. want to add and install it.

* The image shows the WSD-F30. Quick Operation Guide

Timepiece Mode（WSD-F20） Setting/Canceling Multi Timepiece Mode（WSD-F30）

These modes use a monochrome LCD to show the time. Because these modes disable the GPS and communica- tion functions, they use only a tiny amount of power and are very useful when you want to conserve as much battery power as possible but still display the time.

WSD-F20 Setting T i m epiec e Mod e

1 2 3 4

Press once

Press the Power button once The watch is set to Tap . to display the App Menu. Tap “Timepiece”. “Timepiece Mode”.

WSD-F30 Setting M u lti T i mepi e c e Mo d e

You can choose either Outdoor style, which shows the altitude and ［ Outdoor Style ］ atmospheric pressure, or Daily Style. 1 2 3

Press once

［ Daily Style ］

Press the Power Tap Tap to button once to “Multi Timepiece”. select the style. display the app list. Swipe up and tap The watch is set to “ ” for Start. “Multi Timepiece Mode”.

1 2 3

Hold down for about Canceling 2 seconds the Modes

Hold down the Power button The watch restarts. The watch for roughly 2 seconds. displays a watch face.

Functions available without a smartphone connection

The functions shown below can still be used when the watch is not paired with a smartphone. (However, to reset the watch so that it can be used, you will need a smartphone.)

・TOOL functions ・Setting an alarm ・Changing the watch face (Compass, Altimeter, Barometer, ・Setting the watch to Airplane Mode Sunrise/sunset time, ・Using the stopwatch Tide Graph, My Graph) ・Using the timer ・Listening to music on your watch * Only if a Bluetooth® headset is connected to the watch ・Checking the time and date ・Counting the number of steps See “Wear OS by Google Help” for details. https://support.google.com/wearos/ Android, Android Wear, Wear OS by Google, Google, Google Fit, Google Assistant and other marks are trademarks of Google LLC.