DOCSLIB.ORG

Preliminary IMPORTANT NOTICE - READ BEFORE MAKING USE of the INFORMATION CONTAINED HEREIN

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Preliminary IMPORTANT NOTICE - READ BEFORE MAKING USE of the INFORMATION CONTAINED HEREIN ICP RAID Software Software Installation and User’s Guide, Version 1.2.7 June 2003 Preliminary IMPORTANT NOTICE - READ BEFORE MAKING USE OF THE INFORMATION CONTAINED HEREIN This information is provided “as is.” Information in this document is provided solely to enable use of ICP products. Except as provided in ICP vortex’s Terms and Conditions of sale ICP vortex and/or its suppliers assume no liability whatsoever, and ICP vortex and/or its suppliers disclaim any express or implied warranty, relating to this information including liability or warranties relating to fitness for a particular purpose, merchantability, satisfactory quality or infringement of any patent, copyright or other intellectual property right. ICP vortex and/or its suppliers assume no responsibility for any omissions or any errors which may appear in this document nor does it make a commitment to update the information contained herein. ICP vortex retains the right to make changes to this document and its products at any time, without notice. No License, express or implied, by Estoppel or otherwise, to any intellectual property rights is granted by this document. ICP products are not intended for use in medical, life saving, or life sustaining applications. Any recommended operating or test methods are correct to ICP’s reasonable knowledge at the time of writing. ICP vortex and/or its suppliers accept no liability for the implementation of these methods within the user’s environment. The user is responsible for and must satisfy itself that any use made of this information or ICP products is suitable to its needs. Any named third party suppliers are provided for information only. The hardware vendor remains solely responsible for the design, sale and functionality of its product, including any liability arising from product infringement or product warranty. ICP vortex accepts no liability for the quality of third party suppliers, and cannot guarantee that third party products are suitable or are compatible with ICP products or that third party suppliers will not change parts so that they are no longer compatible or no longer suitable. IN NO EVENT WILL ICP VORTEX AND/OR ITS SUPPLIERS BE LIABLE TO THE RECIPIENT OR USER OF THIS INFORMATION FOR ANY LOSS OF PROFITS, LOSS OF USE, BUSINESS INTERRUPTIONS, INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS, LOSS OR CORRUPTION OF DATA, INCIDENTAL, INDIRECT, SPECULATIVE, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER ARISING AND IRRESPECTIVE OF WHETHER ICP VORTEX HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITATIONS AND DISCLAIMERS SET FORTH HEREIN WERE AN ESSENTIAL ELEMENT IN ICP VORTEX AGREEING TO SUPPLY THIS INFORMATION FREE OF CHARGE. THEY SHALL APPLY NOTWITHSTANDING SECTION 1.1 OF THE TERMS AND CONDITIONS OF SALE OF ICP VORTEX Software Installation and User’s Guide Contents 1 Introduction 1.1 Using the User Documentation Set .............................................................................................13 1.1.1 Document Formats ....................................................................................................14 1.2 About This Guide.........................................................................................................................14 1.2.1 Installation Guide .......................................................................................................15 1.2.2 User’s Guide ..............................................................................................................16 1.3 RAID Levels ................................................................................................................................17 1.3.1 RAID 0 - Data Striping ...............................................................................................17 1.3.2 RAID 1 - Disk Mirroring/Disk Duplexing.....................................................................17 1.3.3 RAID 4 - Data Striping With a Dedicated Parity Drive ...............................................18 1.3.4 RAID 5 - Data Striping with Striped Parity .................................................................19 1.3.5 RAID 10 - Combination of RAID 1 and RAID 0..........................................................19 1.3.6 Levels of Drive Hierarchy Within the ICP RAID Firmware .........................................20 1.4 Transparency of Host Drives.......................................................................................................21 1.4.1 Using CD-ROMs, DATs, Tapes, etc. .........................................................................22 2 Getting Started 2.1 Determine the RAID Configuration..............................................................................................24 2.2 Create the RAID Driver Installation Diskette ...............................................................................25 2.2.1 Preferred Method.......................................................................................................25 2.2.2 Alternative Methods ...................................................................................................27 2.3 Install the ICP RAID Controller....................................................................................................29 3 Quick Installation 3.1 Roadmap for Quick Installation ...................................................................................................31 3.2 Create a Bootable Host Drive—RAID 1 Mirrored Array...............................................................32 3.3 Create a Bootable Host Drive—RAID 5 Disk Array with Hot Fix .................................................36 3.4 Microsoft Windows 2000 and Windows NT Quick Installation.....................................................41 3.4.1 Minimum Requirements.............................................................................................41 3.4.2 OS Installation Procedures ........................................................................................41 3.5 Novell NetWare 4.2x, 5.x and 6.x Quick Installation....................................................................42 3.5.1 Minimum Requirements.............................................................................................43 3.5.2 OS Installation Procedures ........................................................................................43 3.6 SCO UnixWare 7.1.1 and 8.0 Quick Installation .........................................................................44 3.6.1 Minimum Requirements.............................................................................................44 3.6.2 OS Installation Procedures ........................................................................................44 3.7 RAID Software Suite Quick Installation .......................................................................................45 3.7.1 Microsoft Windows 2000 and NT 4.0.........................................................................45 3.7.2 Novell NetWare 4.2x, 5.x and 6.x ..............................................................................46 3.7.3 SCO UnixWare 7.1.1 or 8.0 .......................................................................................47 4 Installing Microsoft Windows NT / 2000 / XP 4.1 Operating System Installation Procedures ..................................................................................48 4.1.1 Pre-Installation Requirements Checklist....................................................................48 4.1.2 Installing an Operating System onto a Host Drive .....................................................49 Software Installation and User’s Guide 3 4.1.3 Installing an OS onto a Disk Drive not Attached to the ICP RAID Controller............. 51 4.1.4 Upgrading/Replacing Windows NT 4.0 Server installed on a host drive ................... 52 4.1.5 Installation to an Existing OS..................................................................................... 54 4.1.6 Replacing Compatible ICP RAID Controllers in Windows 2000 / XP ........................ 56 4.2 Configuring the RAID Configuration Service ...............................................................................57 5 Installing Linux 5.1 Before you begin ......................................................................................................................... 60 5.1.1 Linux Drivers and Updates ........................................................................................ 60 5.1.2 Available Drivers and Tools on the RAID Software Suite CD-ROM .......................... 61 5.1.3 Assumptions About Path Names...............................................................................61 5.2 General Installation Notes........................................................................................................... 61 5.2.1 Minimum Hardware Requirements ............................................................................ 61 5.3 Installing Red Hat Linux 7.x on a Host Drive...............................................................................62 5.4 Installing an ICP RAID Controller onto an Existing Linux Server ................................................ 63 5.4.1 Installation of Driver Sources from the RAID Software Suite CD-ROM.....................63 5.5 GDTH Driver Parameters ............................................................................................................ 64 5.5.1 Reservation of SCSI Devices ...................................................................................
Load more

Recommended publications
  • Megaraid® 1078-Based SAS RAID Controllers User's Guide
    USER’S GUIDE MegaRAID® 1078-based SAS RAID Controllers February 2007 ® 80-00157-01 Rev. A This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Purchase of I2C components of LSI Logic Corporation, or one of its sublicensed Associated Companies, conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C standard Specification as defined by Philips. Document 80-00157-01 Rev. A, February 2007. This document describes the current versions of the LSI Logic Corporation MegaRAID SAS RAID controllers and will remain the official reference source for all revisions/releases of these products until rescinded by an update. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties.
    [Show full text]
  • Disk Array Data Organizations and RAID
    Guest Lecture for 15-440 Disk Array Data Organizations and RAID October 2010, Greg Ganger © 1 Plan for today Why have multiple disks? Storage capacity, performance capacity, reliability Load distribution problem and approaches disk striping Fault tolerance replication parity-based protection “RAID” and the Disk Array Matrix Rebuild October 2010, Greg Ganger © 2 Why multi-disk systems? A single storage device may not provide enough storage capacity, performance capacity, reliability So, what is the simplest arrangement? October 2010, Greg Ganger © 3 Just a bunch of disks (JBOD) A0 B0 C0 D0 A1 B1 C1 D1 A2 B2 C2 D2 A3 B3 C3 D3 Yes, it’s a goofy name industry really does sell “JBOD enclosures” October 2010, Greg Ganger © 4 Disk Subsystem Load Balancing I/O requests are almost never evenly distributed Some data is requested more than other data Depends on the apps, usage, time, … October 2010, Greg Ganger © 5 Disk Subsystem Load Balancing I/O requests are almost never evenly distributed Some data is requested more than other data Depends on the apps, usage, time, … What is the right data-to-disk assignment policy? Common approach: Fixed data placement Your data is on disk X, period! For good reasons too: you bought it or you’re paying more … Fancy: Dynamic data placement If some of your files are accessed a lot, the admin (or even system) may separate the “hot” files across multiple disks In this scenario, entire files systems (or even files) are manually moved by the system admin to specific disks October 2010, Greg
    [Show full text]
  • 6Gb/S Megaraid SAS RAID Controllers User Guide February 2013
    6Gb/s MegaRAID® SAS RAID Controllers User Guide February 2013 41450-04, Rev. B 41450-04B 6Gb/s MegaRAID SAS RAID Controllers User Guide February 2013 Revision History Version and Date Description of Changes 41450-04, Rev. B, February 2013 Updated the environmental conditions for the RAID controllers. Updated this guide to the new template. 41450-04, Rev. A, August 2012 Added the MegaRAID SAS 9270-8i, SAS 9271-4i, SAS 9271-8i, SAS 9271-8iCC, SAS 9286-8e, SAS 9286CV-8e, and SAS 9286CV-8eCC RAID controllers. 41450-03, Rev. A, April 2012 Added the MegaRAID SAS 9265CV-8i, SAS 9266-4i, SAS 9266-8i, and SAS 9285CV-8e RAID controllers. 41450-02, Rev. E, February 2011 Added the MegaRAID SAS 9260CV-4i, SAS 9260CV-8i, SAS 9265-8i, and SAS 9285-8e RAID controllers. 41450-02, Rev. D, June 2010 Added the MegaRAID SAS 9260-16i, SAS 9280-16i4e, and SAS 9280-24i4e RAID controllers. 41450-02, Rev. C, April 2010 Put this guide in the new template. 41450-02, Rev. B, November 2009 Added the MegaRAID SAS 9240-4i, SAS 9240-8i, SAS 9261-8i, and SAS 9280-4i4e RAID controllers. 41450-02, Rev. A, July 2009 Added the MegaRAID SAS 9260-4i, SAS 9260DE-8i, SAS 9280-8e, and SAS 9280DE-8e RAID controllers. 41450-01, Rev. A, June 2009 Added the MegaRAID SAS 9260-8i RAID controller. 41450-00, Rev. A, March 2009 Initial release of this document. LSI, the LSI & Design logo, CacheCade, CacheVault, Fusion-MPT, MegaRAID, and SafeStore are trademarks or registered trademarks All other brand and product names may be trademarks of their respective companies.
    [Show full text]
  • 6 O--C/?__I RAID-II: Design and Implementation Of
    f r : NASA-CR-192911 I I /N --6 o--c/?__i _ /f( RAID-II: Design and Implementation of a/t 't Large Scale Disk Array Controller R.H. Katz, P.M. Chen, A.L. Drapeau, E.K. Lee, K. Lutz, E.L. Miller, S. Seshan, D.A. Patterson r u i (NASA-CR-192911) RAID-Z: DESIGN N93-25233 AND IMPLEMENTATION OF A LARGE SCALE u DISK ARRAY CONTROLLER (California i Univ.) 18 p Unclas J II ! G3160 0158657 ! I i I \ i O"-_ Y'O J i!i111 ,= -, • • ,°. °.° o.o I I Report No. UCB/CSD-92-705 "-----! I October 1992 _,'_-_,_ i i I , " Computer Science Division (EECS) University of California, Berkeley Berkeley, California 94720 RAID-II: Design and Implementation of a Large Scale Disk Array Controller 1 R. H. Katz P. M. Chen, A. L Drapeau, E. K. Lee, K. Lutz, E. L Miller, S. Seshan, D. A. Patterson Computer Science Division Electrical Engineering and Computer Science Department University of California, Berkeley Berkeley, CA 94720 Abstract: We describe the implementation of a large scale disk array controller and subsystem incorporating over 100 high performance 3.5" disk chives. It is designed to provide 40 MB/s sustained performance and 40 GB capacity in three 19" racks. The array controller forms an integral part of a file server that attaches to a Gb/s local area network. The controller implements a high bandwidth interconnect between an interleaved memory, an XOR calculation engine, the network interface (HIPPI), and the disk interfaces (SCSI). The system is now functionally operational, and we are tuning its performance.
    [Show full text]
  • ICP Disk Array Controllers
    ICP Disk Array Controllers GDT8546RZ GDT8546RZ is a 4-channel PCI RAID controller offering demands for inexpensive entry-level RAID solutions. Its the option of connecting up to four serial ATA drives. compact construction allows GDT8546RZ to be used in Parallel ATA (IDE) disk drives can be linked with an low profile systems. The controller is not only suitable optional accessory. The controller is based on the for high density and/or entry-level rackmount servers, but Serial AT Attachment (SATA) technology, satisfying the also for high-end desktops and workstations. Excellence in Controllers 64-bit/66MHz PCI - Serial ATA Hardware RAID Controller High Configuration Flexibility ● Supports RAID 0, 1, 4, 5 and 10 ● ROM-resident setup (ICP RAID Console) with ● Hot Plug, Auto Hot Plug with SAF-TE support integrated “Express Setup” function (CTRL+<G>) ● Private or Pool Hot Fix drives ● Simultaneous operation of several disk arrays ● Hardware RAID is totally independent of the host and ● Flexible capacity setting operating system ● Online capacity expansion ● Integrated acoustic alarm ● Online RAID level migration ● Complete disk array migration Versatile Connectivity Capabilities ● Controller switch and controller upgrade without ● Supports four internal independent SATA 1.5 channels reconfiguration ● Data transfer rate up to 150MB/sec. per channel ● Automatic adaptation to changes in SATA configuration ● Connection of one hard drive per channel (point-to- point configuration making cabling redundant) Integrated RAID Software ● Cable length
    [Show full text]
  • 416 Distributed Systems
    416 Distributed Systems RAID, Feb 16 2018 Thanks to Greg Ganger and Remzi Arapaci-Dusseau for slides Outline • Using multiple disks • Why have multiple disks? • problem and approaches • RAID levels and performance 3 Motivation: Why use multiple disks? • Capacity • More disks allows us to store more data • Performance • Access multiple disks in parallel • Each disk can be working on independent read or write • Overlap seek and rotational positioning time for all • Reliability • Recover from disk (or single sector) failures • Will need to store multiple copies of data to recover • So, what is the simplest arrangement? JustJust a bunch a bunch of of disks disks (JBOD) (JBOD) A0 B0 C0 D0 A1 B1 C1 D1 A2 B2 C2 D2 A3 B3 C3 D3 • Yes, it’s a goofy name • industry Yes, it’sreally a goofydoes sellname “JBOD enclosures” industry really does sell “JBOD enclosures” October 2010, Greg Ganger © 5 4 Disk Subsystem Load Balancing • I/O requests are almost never evenly distributed • Some data is requested more than other data • Depends on the apps, usage, time, ... • What is the right data-to-disk assignment policy? • Common approach: Fixed data placement • Your data is on disk X, period! • For good reasons too: you bought it or you’re paying more... • Fancy: Dynamic data placement • If some of your files are accessed a lot, the admin(or even system) may separate the “hot” files across multiple disks • In this scenario, entire files systems (or even files) are manually moved by the system admin to specific disks • Alternative: Disk striping • Stripe all
    [Show full text]
  • IBM XIV Storage System Host Attachment and Interoperability
    Front cover IBM XIV Storage System Host Attachment and Interoperability Integrate with DB2, VMware ESX, and Microsoft HyperV Get operating system specifics for host side tuning Use XIV with IBM i, N series, and ProtecTIER Bertrand Dufrasne Bruce Allworth Desire Brival Mark Kremkus Markus Oscheka Thomas Peralto ibm.com/redbooks International Technical Support Organization IBM XIV Storage System Host Attachment and Interoperability March 2013 SG24-7904-02 Note: Before using this information and the product it supports, read the information in “Notices” on page ix. Third Edition (March 2013) This edition applies to the IBM XIV Storage System (Machine types 2812-114 and 2810-114) with XIV system software Version 11.1.1. © Copyright International Business Machines Corporation 2012, 2013. All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Notices . ix Trademarks . .x Preface . xi The team who wrote this book . xi Now you can become a published author, too! . xiii Comments welcome. xiii Stay connected to IBM Redbooks . xiv Summary of changes. .xv March 2013, Third Edition . .xv Chapter 1. Host connectivity . 1 1.1 Overview . 2 1.1.1 Module, patch panel, and host connectivity . 4 1.1.2 Host operating system support . 9 1.1.3 Downloading the entire XIV support matrix by using the SSIC. 9 1.1.4 Host Attachment Kits . 10 1.1.5 Fibre Channel versus iSCSI access . 12 1.2 Fibre Channel connectivity . 13 1.2.1 Preparation steps . 13 1.2.2 Fibre Channel configurations .
    [Show full text]
  • Hitachi Compute Blade 500 Series EFI User's Guide
    Hitachi Compute Blade 500 Series EFI User's Guide Document Organization Product Version Getting Help Contents MK-91CB500024-11 © 2012-2015 Hitachi, Ltd. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose without the express written permission of Hitachi, Ltd. Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and assumes no responsibility for its use. This document contains the most current information available at the time of publication. When new or revised information becomes available, this entire document will be updated and distributed to all registered users. Some of the features described in this document might not be currently available. Refer to the most recent product announcement for information about feature and product availability, or contact Hitachi Data Systems Corporation at https://portal.hds.com. Notice: Hitachi, Ltd., products and services can be ordered only under the terms and conditions of the applicable Hitachi Data Systems Corporation agreements. The use of Hitachi, Ltd., products is governed by the terms of your agreements with Hitachi Data Systems Corporation. Hitachi is a registered trademark of Hitachi, Ltd., in the Rollback ConfigurationUnited States and other countries. Hitachi Data Systems is a registered trademark and service mark of Hitachi, Ltd., in the United States and other countries. Archivas, Essential NAS Platform, HiCommand, Hi-Track, ShadowImage, Tagmaserve, Tagmasoft, Tagmasolve, Tagmastore, TrueCopy, Universal Star Network, and Universal Storage Platform are registered trademarks of Hitachi Data Systems Corporation.
    [Show full text]
  • Acceleraid 170LP
    AcceleRAID 170LP Installation Guide DB11-000024-00 First Edition 08P5513 Electromagnetic Compatibility Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and the receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. LSI Logic is not responsible for any radio or television interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by LSI Logic.
    [Show full text]
  • Chapter 1 : " Introduction "
    Chapter 1 : " Introduction " This chapter will introduce you to your new Disk Array's features and provide information on general RAID concept. 1-1 Introduction Features This section provides an overview of the features. For more detailed information, please refer to the technical specifications appendix at the end of this manual . Your Disk Array includes the following features : Easy Operation As everyone knows, conventional Disk Arrays are designed for experienced computer specialists. To solve complicated and time consuming operating procedures, we came up with a revolutionary idea : -- Innovative Plug And Play RAID -- As compared to a conventional Disk Array's long-winded setup procedures, your Disk Array can be ready to go after using the simple step by step built-in setup program. Ultra High performance Your Disk Array combines an extremely high speed microprocessor with the latest chip set, SCSI hardware technology, perfect firmware and an artistic design. The result is one of the fastest, most reliable Disk Array systems on the market. Supports virtually all popular operating systems ,platforms and network environments because it works independently from the O.S. Ultra 160 LVD SCSI channel interface to your Host computer, up to 160MB data transfer rate provides the processing and access power for you to handle complex and large files. Selective SCSI ID 0 ~ 14 , support with active termination. Tagged-command queuing : allows processing of up to 255 simultaneous data requests. Selective RAID levels 0, 1, 0+1, 3 or 5. Build-in 128MB cache memory, expandable up to 512MB. Serial communication port ( Terminal Port ) permits array controller operation through a standard VT100 terminal (or equivalent).
    [Show full text]
  • N8103-101 Disk Array Controller
    . ExpressPromise 5800 120Lh SuperTrak EX8350 Disk Array Controller (SATA2) User’s Guide This page is deliberately left empty. User Guide www.nec-computers.com 100 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computers S.A.S. and/or its licensors. NEC Computers S.A.S. and/ or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NEC Computers product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each product is dependent upon factors such as system configuration, customer data, and operator control. Since implementation by customers of each product may vary, the suitability of specific product configurations and applications must be determined by the customer and is not warranted by NEC Computers S.A.S. To allow for design and specification improvements, the information in this document is subject to change at any time, without notice. Reproduction of this document or portions thereof with- out prior written approval of NEC Computers S.A.S. is prohibited. Trademarks Adobe, and Adobe Acrobat are registered trademarks of Adobe Systems, Incorporated. Microsoft, Microsoft Windows, Windows NT, Windows 95, Windows 98, Windows 2000 and Windows Storage Server 2003 are all registered trademarks of Microsoft Corporation. MS-DOS is a registered trademark of Microsoft Corporation. Intel and Pentium are registered trademarks of Intel Corporation.
    [Show full text]
  • Of File Systems and Storage Models
    Chapter 4 Of File Systems and Storage Models Disks are always full. It is futile to try to get more disk space. Data expands to fill any void. –Parkinson’sLawasappliedto disks 4.1 Introduction This chapter deals primarily with how we store data. Virtually all computer systems require some way to store data permanently; even so-called “diskless” systems do require access to certain files in order to boot, run and be useful. Albeit stored remotely (or in memory), these bits reside on some sort of storage system. Most frequently, data is stored on local hard disks, but over the last few years more and more of our files have moved “into the cloud”, where di↵erent providers o↵er easy access to large amounts of storage over the network. We have more and more computers depending on access to remote systems, shifting our traditional view of what constitutes a storage device. 74 CHAPTER 4. OF FILE SYSTEMS AND STORAGE MODELS 75 As system administrators, we are responsible for all kinds of devices: we build systems running entirely without local storage just as we maintain the massive enterprise storage arrays that enable decentralized data replication and archival. We manage large numbers of computers with their own hard drives, using a variety of technologies to maximize throughput before the data even gets onto a network. In order to be able to optimize our systems on this level, it is important for us to understand the principal concepts of how data is stored, the di↵erent storage models and disk interfaces.Itisimportanttobeawareofcertain physical properties of our storage media, and the impact they, as well as certain historic limitations, have on how we utilize disks.
    [Show full text]