DOCSLIB.ORG

National-Seals-Axilock-Bearings.Pdf

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
National-Seals-Axilock-Bearings.Pdf Catalog No. 502W 2011 Supersedes 502W Dated 2006 Black PMS 286 100c60m6k For Parts Look Up Visit www.FMe-cat.com White www.federalmogul.com Black PMS 485 100m91y NEW! National® Oil Seals D Reverse F “Red” 37 Series FEATURING A E B C D National Introduces the Most Innovative Technology in Sealing! A Exclusive Dynamic Edge™ technology from National Oil Seals is an innovative dirt exclusion system engineered to deflect dirt and moisture away from wheel end components. The key to National Dynamic Edge™ technology is a patent pending sinusoidal wave that actually creates a pumping action to aggressively push dirt away from the seal. Manufactured with dependable, abrasion resistant nitrile, the spring-loaded main lip delivers positive sealing with reduced shaft interference. Unitized ™ A Dynamic Edge pumping feature deflects construction provides greater structural integrity, contamination away from the face of the seal easier installation and main lip protection. B Four floating points of contact lock out For the latest technology and engineering dirt and moisture innovation — there’s no other seal that C Single spring-loaded sealing lip provides main performs like National! contact point reducing shaft interference D Unique rubber I.D. and O.D. includes exclusive ® SURE-LOCK I.D. rib technology, preventing Black contamination as well as bore and shaft leaks E Unitized construction provides greater structural integrity PMS 286 F Metal O.D. maintains position on hub bore 100c60m6k © 2011 Federal-Mogul Corporation, Southfield, MI 48033 White Table of Contents Application Information Pages Drive Axles 61-83 Front Axles 45-60 Pinion Seals 84-88 Trailer, Tag and Pusher Axles 31-44 Catalog Usage Information Abbreviations Used in this Catalog III Manufacturer to Axle Type to Page Index III How to Use This Catalog IV Axle Location Index 1-30 Interchange Information Grease Seal to Oil Bath Seal Conversion Chart 131 Hub Cap 127-128 Oil Bath Seals (Competitor and OEM to National) 104-126 Pinion Seals 129-130 Product Features 37 Series Seal Design IFC 38 Series Seal Design II AxiLok® Spindle Nuts XVII-XX Bearing Set Coverage XII Hub Cap Features X-XI Matched Bearing Sets VI Specifications Axle Ring Specifications 93 Axle Flange Gasket Specifications VIII-IX Bearing to Seal Comparison 97-100 Hub Cap and Gasket Specifications 91 Hub Cap Design and Description 92 Installation Tools 94-96 Oil Bath Seal Numerical Listing 89 Oil Bath Seal Shaft Size Listing 90 Popular Tool Quick Reference 132 Seal to Bearing Comparison 101-103 Wheel End Offering VII Technical Information Oil Bath Seal Installation Procedures XIV-XVI Troubleshooting Checklist XIII Warranty Information Explanation of Warranty Terms V At Federal-Mogul, our commitment to providing premium wheel end solutions to the commercial vehicle aftermarket begins with National®. This dedication to quality allows us to stay a step ahead of ever changing technology by supplying high-end, premium products that meet or exceed the original equipment specifications. Comprehensive coverage, unsurpassed quality and the brand name you can trust help make National – The Heavy Duty Wheel End Experts. Oil Bath Seals Fel-Pro® Gaskets “Gold” 38 Series • Famous blue non-stick coating for hassle-free installation and removal • Proprietary PTFE compound endures extreme temperatures, • Quality gasket material provides a leak-free seal compatible with mixed lubricants and has the lowest friction co-efficient of all seal materials Hub Caps • Patented, lay-down bi-directional sealing lip provides a greater sealing surface especially during wheel end movement • Window is resistant to cracking, clouding and discoloration and is • Triple barrier contamination system, provides the ultimate compatible with all lubricants in dirt exclusion • Slit style vent plug design dramatically reduces contamination associated with conventional pinhole designs “Red” 37 Series • Dependable, abrasion resistant nitrile with spring-loaded Bearings Black main lip for positive sealing with reduced shaft interference • Comprehensive coverage for commercial vehicle applications • Unitized construction provides greater structural integrity, • Matched bearing sets for better performance, easier installation and main lip protection longer-life and enhanced reliability PMS 286 • Unique rubber I.D. and O.D. includes patented SURE-LOCK® ribs • Differential and transmission rebuild kits that prevent shaft leaks and bore contamination 100c60m6k White APPLICATIONS INDEX MANUFACTURER TO PAGE Manufacturer Type Page Manufacturer Type Page AL-KO Kober Trailer 31 Mack Pinion 87 Clark Trailer 31 Mack-Midliner Front 51 Clark Front 45 Mack-Midliner Drive 69 Coleman Front 45 Margirus Front 51 Coleman Drive 61 Margirus Drive 69 Dana (See Spicer) --- --- Mercedes-Benz Front 51 Delphos Trailer 31 Mercedes-Benz Drive 69 Dexter Trailer 32 Meritor Trailer 37 Dodge Front 45 Meritor Front 51 Dodge Drive 61 Meritor Drive 69 Eaton (See Spicer) --- --- Meritor Pinion 84 Fabco Front 46 Moss Gear Trailer 39 Ford Front 46 Nabors Trailer Trailer 39 Ford Drive 62 Navistar Trailer 39 Fruehauf Trailer 32 Navistar Front 53 FWD Front 47 Navistar Drive 73 FWD Drive 64 Navistar Pinion 88 GMC Trailer 33 Palmer Trailer 40 GMC Front 47 Prior Trailer 40 GMC Drive 64 Rockwell (See Meritor) --- --- Hadco Trailer 33 R.O.R. (See Meritor) --- --- Hammerblow Trailer 33 Spencer Trailer 40 Hayes Trailer 33 Spicer Trailer 41 Hendrickson Trailer 34 Spicer Front 56 Ingersoll Trailer 34 Spicer Drive 76 International (See Navistar) --- --- Spicer Pinion 86 Isuzu Front 49 Standard-Forge Trailer 42 Isuzu Drive 66 Trunnion Trailer 44 Iveco Front 49 Volvo Trailer 44 Iveco Drive 67 Volvo Front 59 Kay-Brunner Trailer 36 Volvo Drive 81 Kelsey-Hayes Trailer 37 Westport Trailer 44 Kershaw Trailer 37 Westport Front 59 Mack Front 49 White Front 59 Mack Drive 67 White Drive 81 ABBREVIATIONS USED IN THIS CATALOG Abbreviation Description Abbreviation Description " Inches KER Kershaw # Pounds K-H Kelsey-Hayes Brg. Bearing lb. Pound C/R Chicago Rawhide MAG Margirus CLK Clark M-B Mercedes-Benz COL Coleman MER Meritor DT Dodge MK Mack DXT Dexter MID Mack-Midliner FH Fruehauf NAV Navistar Fig. Figure No. Number FORD Ford O.D. Outside Diameter FWD FWD S-F Standard-Forge GMC GMC SP Spicer GVW Gross Vehicle Weight TRUN Trunnion I.D. Inside Diameter VOL Volvo ISU Isuzu w/ With IVC Iveco w/o Without K-B Kay-Brunner WHT White III HOW TO USE THIS CATALOG Unlike most automotive and light truck applications, medium-duty truck wheel end applications are cataloged according to the axle manufacturer, not a specific vehicle application. The manufacturer of the axle and the truck or trailer is frequently not the same. The axle manufacturer and their model or code can generally be found in one of the following locations: MOST MEDIUM-DUTY TRUCKS: The vehicle option tag can be found in the glove box MOST HEAVY-DUTY TRUCK DRIVE AND TRAILER AXLES: A tag with the required information is attached to the axle or axle housing itself MOST STEERING AND TAG AXLES: The information is usually cast directly into the axle tube itself Once the necessary axle manufacturer and that manufacturer’s code or model is obtained turn to page 1 of the catalog. Every axle manufacturer is listed in the following sequence: 1. Trailer, Tag and Pusher Axles 2. Front Axles 3. Drive Axles Within each of these sections is a listing of each axle manufacturer in alphabetical order. Once the axle manufacturer is located you will find a manufacturer’s model or code number and weight capacity listed with a specific catalog line number and page number. Go to the page number specified and look for the specific line number to find the products you need. Because the I.D. tags may no longer be on the vehicle or the original axle may have been changed, the catalog also features part number interchanges from the most popular OEM and competitor’s part numbers to the equivalent Oil Bath Seal. In the case of the wheel end bearings, industry standard part numbers are generally used and are the same regardless of manufacturer. IV IMPORTANT INSTRUCTIONS ALWAYS CONSULT THE MOST CURRENT PARTS CATALOG AND SUPPLEMENTS FOR PARTS INFORMATION If this parts catalog is more than two years old, contact your local distributor to ensure you have the most up-to-date parts catalog. DESTROY ALL PREVIOUS Editions and supplements of this catalog This parts catalog replaces all previous editions. See catalog cover for supersession dates. BEFORE INSTALLING ANY PART LISTED IN THIS PARTS CATALOG, CONSULT THE APPROPRIATE VEHICLE MANUFACTURER’S INSTRUCTION MANUAL FOR INSTALLATION INSTRUCTIONS This catalog contains parts information only. Before installing any of the parts Referenced in this catalog ALWAYS consult the appropriate vehicle Manufacturer’s instruction manual for detailed installation instructions. WARRANTY Products sold are warranted to be free from defects in workmanship or material for a period of one (1) year from the date of purchase. The remedy for breach of this warranty is limited to the free exchange of the products(s) shown to our satisfaction to be defective. Liability for neglect, misuse, special, incidental, direct, indirect and consequential damages is specifically disclaimed. NO OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, IS MADE. WARNING Use parts only for applications and interchanges in this catalog. Failure to heed this warning could result in reduced life or failure of the part. All parts listed in this catalog are manufactured to the highest industry standards, but are not intended for use in a space program, atomic energy/nuclear reactor equipment, medical, or aircraft applications. V Matching Bearing Sets For Better Wheel End Performance, Replace Your Cup and Cone Together: • Better performance • Higher reliability • Longer life Coverage for all popular heavy-duty axles: front, drive and trailer. Set# Bearings Timken Set No. Set# Bearings Timken Set No.
Load more

Recommended publications
  • Technical Characteristics Exterior Interior & Comfort
    TECHNICAL CHARACTERISTICS GL - Automatiic Gearbox GLX - Automatiic Gearbox GLX - Automatiic Gearbox SLDA ENGINE Number of cylinders 4 4 4 Valves/cylinder 4 4 4 Fuel type Petrol Petrol Petrol Displacement (cc) 1462 1462 1462 Max power HP/rpm 95 / 6000 95 / 6000 95 / 6000 Max torque Nm 130 / 4400 130 / 4400 130 / 4400 Fuel System multipoint injection multipoint injection multipoint injection DIMENSIONS Dimensions (Lxwxh) in mm 4490*1730*1475 4490*1730*1475 4490*1730*1475 Wheelbase (mm) 2650 2650 2650 Ground clearance (mm) 160 160 160 TRANSMISSION Gearbox Automatic Automatic Automatic WEIGHT/CAPACITIES Fuel tank capacity (L) 43 43 43 Curb weight (kg) 1020 1020 1020 Gross vehicle weight (kg) 1500 1500 1500 Number of seats 5 5 5 BRAKES Rear brake Drums Drums Drums Front brake Ventilated discs Ventilated discs Ventilated discs SUSPENSIONS Rear suspension Torsion bar Torsion bar Torsion bar Front suspension Coil type Coil type Coil type TYRES Tyre dimension 195/55R16 195/55R16 195/55R16 EXTERIOR GL - Automatiic Gearbox GLX - Automatiic Gearbox GLX - Automatiic Gearbox SLDA Wheels Steel with hubcap Aluminium Steel with hubcap Door mirrors Body colour Body colour Body colour Adjustable side mirrors Electrics Electrics Electrics Folding side mirrors Manuals Electrics Electrics INTERIOR & COMFORT GL - Automatiic Gearbox GLX - Automatiic Gearbox GLX - Automatiic Gearbox SLDA Upholstery Fabric Semi leather Semi leather Power Steering Parking sensor - Rear Rear Videocamera - - Rear Steering wheel Urethane Leather Leather Keyless entry system -
    [Show full text]
  • The Achilles Heel That Wasn't
    Issue 91 – June, 2010 THE ACHILLES HEEL THAT WASN’T The Silver Shadow as most of us know was the Factory’s first real sortie into the Brave New World. Sales of the staid but beautiful Cloud and ‘S’ series cars were falling through competition from much less expensive vehicles who through the impetus of technical development that was burgeoned by the Second World War were able to offer everything that Rolls-Royce could fit to their cars. The American market was finally recognized as the Company’s salvation. No longer could they rely on beautiful tasteful finishes quiet engines and sumptuous rides to keep the bottom line healthy. The vee eight engine that was jammed into the Cloud chassis greatly improved performance but then they had to have noisier clocks! By then the ancient ‘Jerkomatic’ transmission as it is fondly known in other circles, was retired after some 15 years service to be replaced by the pan-automotive transmission the GM400 a three speed that enjoyed production numbers in the millions; but providing a means of communicating with the unit was a challenge. The transition from a floor mounted change lever for the last of a long line of manual gearboxes to a lever on the steering column was indeed a quantum leak. By then millions of vehicles around the world had, for over half a century got by with a central 1230 change speed lever that was stuffed through the lid of the box and worked very well. One drawback was engaging low gear with a reserved lady in the centre of the front seat which could present some embarrassing situations but they were not a major consideration.
    [Show full text]
  • Preset by Meritor Hub Assemblies for Trailer Axles
    Maintenance Manual MM-0637 PreSet by Meritor Hub Assemblies for Trailer Axles, and Steer and Drive Axles Revised 07-12 Service Notes About This Manual If Tools and Supplies are Specified in This manual provides maintenance and service procedures for This Manual PreSet by Meritor hub assemblies. Contact Meritor’s Commercial Vehicle Aftermarket at 888-725-9355. Before You Begin 1. Read and understand all instructions and procedures before Warranty Information you begin to service components. Refer to brochure SP-95155, Commercial Vehicle Systems 2. Read and observe all Warning and Caution hazard alert Warranty, for complete warranty information. For instructions to messages in this publication. They provide information that can return warrantable parts to Meritor for reimbursement help prevent serious personal injury, damage to components, consideration, contact Meritor’s OnTrac Technical Support Center at or both. 866-668-7221 for assistance. 3. Follow your company’s maintenance and service, installation, and diagnostics guidelines. 4. Use special tools when required to help avoid serious personal injury and damage to components. Hazard Alert Messages and Torque Symbols WARNING A Warning alerts you to an instruction or procedure that you must follow exactly to avoid serious personal injury and damage to components. CAUTION A Caution alerts you to an instruction or procedure that you must follow exactly to avoid damage to components. @ This symbol alerts you to tighten fasteners to a specified torque value. How to Obtain Additional Maintenance, Service and Product Information Visit Literature on Demand at meritor.com to access and order additional information. Contact the OnTrac Customer Service Center at 866-668-7221 (United States and Canada); 001-800-889-1834 (Mexico); or email [email protected].
    [Show full text]
  • The KIC Group Product Catalog CATALOG INDEX
    ® The KIC Group Product Catalog CATALOG INDEX Hub & Drum Assemblies - Cast Spokes - Hub/Rotors KIC Hub & Drum Assembly Part Numbering System ............................................................................................................. 2 Icon Legend............................................................................................................................................................................2 Hub Dynamic Capacities ........................................................................................................................................................ 3 Ductile & Gray Iron Properties................................................................................................................................................ 3 Assembly Part Number by Application ................................................................................................................................... 4 Hub Series Index by SAE Designation ................................................................................................................................... 8 Assembly Part Number Index............................................................................................................................................... 0 Assembly Part Number Index by Gunite Hub PN................................................................................................................. 4 Assembly Part Number Index by Webb Hub PN .................................................................................................................
    [Show full text]
  • Technical Characteristics Exterior
    TECHNICAL CHARACTERISTICS 1.4L Access 5-Manual 1.4L High 5-Manual Manufacturer Code NSP150L-AEMDK 4D NSP150L-AEMRK 4G ENGINE Number of cylinders 4 4 Engine Type Cylinder in line Cylinder in line Fuel type Petrol Petrol Displacement (cc) 1329 1329 Max power kW/rpm 73/6000 73/6000 Max power HP/rpm 99/6000 99/6000 Max torque Nm 123/4200 123/4200 Fuel System External injection External injection BODY Body style Sedan Sedan Number of doors 4 doors 4 doors DIMENSIONS Ground clearance (mm) 133 133 Wheelbase (mm) 2550 2550 Dimensions (Lxwxh) in mm 4420 x 1730 x 1475 4420 x 1730 x 1475 TRANSMISSION Gearbox Manual Manual WEIGHT/CAPACITIES Fuel tank capacity (L) 42 42 Curb weight (kg) 1075 1090 Gross vehicle weight (kg) 1550 1550 Number of seats 5 5 BRAKES Front brake Ventilated discs Ventilated discs Rear brake Drums Drums Parking brake Manual Manual SUSPENSIONS Front suspension MacPherson strut Coil type Rear suspension Torsion bar Torsion bar TYRES Tyre dimension 185/60 R15 185/60 R15 EXTERIOR 1.4L Access 5-Manual 1.4L High 5-Manual Wheels Steel with hubcap Alloy Door mirrors Body colour Body colour Adjustable side mirrors Electric Electric Folding side mirrors Manuals Manuals Bumper - Front&Rear Colored Colored INTERIOR & COMFORT 1.4L Access 5-Manual 1.4L High 5-Manual CFAO reserves the right to modify its visuels without notice, likewise their characteristics, equipment and accessories. Pictures are not contractual. Touchscreen Radio Radio CD Radio CD Connections Aux , USB , Apple CarPlay , Android Auto USB , Apple CarPlay , Android Auto Steering
    [Show full text]
  • Quick Reference Catalog Table of Contents
    STEMCO ® QUICK REFERENCE CATALOG QUICK REFERENCE Making the Roadways Safer® TABLE OF CONTENTS Platinum Performance System™ . 2-3 Guardian® HP . 4-5 Discover® . 6-7 Voyager® . 8-9 Grit Guard® . 10-. 11 Hub Seal Reference Chart . 12 Hub Seal Interchange . 13 Hub Seal Quick Reference . 14-1. 6 Trifecta™ . 18-1. 9 Heavy Duty Bearings . 20-21 Bearings to Hub Seal Set Cross Reference . 22-23 Unitized Pinion Seal Specifications and Interchange . 24 Axle Ring to Hub Seal Set Cross Reference . 25 Sentinel® Technology . 26-27 Hub Cap Component Specifications and Interchange . 28-38 DataTrac™ Pro . 40-41 Hubodometer® . 42-43 Hubodometer® Mounts . 44 Pro-Torq® . 46-47 Pro-Torq® Applications & Specifications . 48-49 Zip-Torq® . 50-51 STEMCO Brake Products High Performance Brake Linings . 52-55 B-Lock™ . 56-57 Brake Lining Cross Reference . 58-59 Crewson™ Automatic Brake Adjuster . 60-63 Aeris® . 64-65 VanFastic™| FLEXAN™ . 66-67 Aeris® Installation . 68-69 Crewson™ Installation . 70-71 DataTrac™ Pro Installation . 72 Hub Cap Installation . 73 Standard Grit Guard® Seal Installation . 74 Guardian® / Guardian® HP Installation . 75 Voyager® / Discover® Hub Seal Installation . 76 Unitized Pinion Seal Installation . 77 Trifecta™ Pre-Adjusted Hub Assembly Installation . 78-79 Pro-Torq® Installation . 80-81 Zip-Torq® Installation . 82-83 TMC Wheel Bearing Adjustment Procedure . 84 Bearing Removal and Installation . 85 Warranty . 88 PPS SOLUTIONS PROVIDE THE INDUSTRY'S BEST WARRANTY Platinum Performance System™ solutions provide exceptional performance and reliability, but it’s their warranties that provide peace of mind for fleet owners and managers. And the more innovative STEMCO® products that are added to the package, the longer the warranty and the greater the peace of mind.
    [Show full text]
  • Fleet Golf Cars the Easy Choice™ When Luxury, Performance and Value Matter
    FLEET GOLF CARS THE EASY CHOICE™ WHEN LUXURY, PERFORMANCE AND VALUE MATTER CONTENTS THE HISTORY OF YAMAHA GOLF CAR �� � � � � � � � � � � � � � � � � 4 - 5 DRIVE2® - STILL THE BEST CAR �� � � � � � � � � � � � � � � � � � � � � � 6 - 9 REFUEL OR RECHARGE? ��������������������������10 - 11 DRIVE2 QUIETECH EFI™ . .12 - 13 DRIVE2 EFI™ ������������������������������������������� 14 - 15 DRIVE2 POWERTECH AC™ . 16 - 17 DRIVE2 AC™ ������������������������������������������� 18 - 19 BATTERY OPTIONS ������������������������������������ 20 - 21 DRIVE2® COLORS . 22 - 23 UMAX® ����������������������������������������������� 24 - 25 UMAX BISTRO®���������������������������������������� 26 - 27 UMAX® RANGE PICKER��������������������������������� 28 - 29 UMAX® COLORS �������������������������������������� 30 - 31 YAMATRACK® �����������������������������������32 - 33 YAMAHA GENUINE PARTS AND ACCESSORIES 34 - 43 YAMALUBE® QUALITY CARE PRODUCTS � � � � � � � � � � � � � 44 - 47 4 SPECIFICATIONS ��������������������������������48 - 51 A HISTORY OF MOVING DREAMS FORWARD 1979 1985 1989 1990 1994 1996 2000 2003 2005 2006 2009 2012 2015 2016 2018 2019 2020 G-1 G-2 G-5 (SUN CLASSIC) G-9 (FLEET MASTER) G-14 (ULTIMA) G-11 (YAMAHAULER) G-20 G-22 (G-MAX) G-23 (U-MAX YDR (THE DRIVE®) YTF1 YDR (THE DRIVE®) YAMATRACK THE DRIVE2 UMAX and UMAX UMAX RALLY2+2 INDEPENDENT REAR The first 2-stroke The first golf car to feature The next generation The G-9 was A larger, 300cc The next generation G-11 (CONCIERGE) Designed for MEDIUM DUTY I) The DRIVE embodied (ADVENTURER ONE)
    [Show full text]
  • Trailer Axles Installation and Operation Manual Trailer Axles
    TRAILER AXLES INSTALLATION AND OPERATION MANUAL TRAILER AXLES Delivering Suspension Solutions Delivering Suspension Solutions For more information, call 800.445.0736 11621.SLDDRW 4/28/2009 8:36 AM WELD PROCEDURE FOR MONO PIVOT BUSHING TYPE ARMS Welding Procedures Preparation Warning ! Clean welds between passes and incorporate tacks REFER TO ES006 FOR ALIGNMENT TO AXLE into the first pass on the tacked side. Fill weld craters and 1. The surface must be free of paint, water, avoid undercuts and cold laps over welds. and other contaminants where welding is to occur. Welds should not be started or stopped at the end of the weld pass. 2. Suspension parts must be at least 60°F. * Normal They should stopped and started away from the ends as shown in Figure 7. recommendations is to preheat Do not wrap the corners of the axle seat while welding. 100-300 degrees F. 1. Three passes are required on each area where the axle is welded to the arms. * Note: Some axle manufacturers recommend preheating Figure 6 shows the size of the weld of each pass. the axle before it is welded. Consult the axle 2. Start welding in the sequence shown in Figure 7 at the rear side where the axle manufacturer for recommended guidelines on and seat meet . Make all first pass welds at all areas before proceeding to the welding to the axle. second pass. 3. Welding needs to be done in a flat horizontal position. 3. Figure 7 also shows the length of weld for both overslung and underslung models. Welding Axle to Suspension WELD PROCEDURE FOR COMMON: Weld Specifications Caution ! The welding procedures must be followed carefully to avoid damage to the axle and suspension which could cause an accident and or serious personal injury.
    [Show full text]
  • Technical Characteristics Exterior Interior & Comfort
    TECHNICAL CHARACTERISTICS GL- Manuall gearbox GL 5D 998e AT ENGINE Number of cylinders 3 3 Fuel type Petrol Petrol Displacement (cc) 998 998 Max torque Nm 90 / 3500 90 / 3500 Fuel System multipoint injection multipoint injection BODY Body style Compacts Compacts Number of doors 5 doors 5 doors DIMENSIONS Ground clearance (mm) 180 180 Dimensions (Lxwxh) in mm 3565*1520*1565 3565*1520*1565 Wheelbase (mm) 2380 2380 TRANSMISSION Gearbox Automatic Automatic WEIGHT/CAPACITIES Fuel tank capacity (L) 27 27 Curb weight (kg) 750 750 Gross vehicle weight (kg) 1170 1170 Number of seats 5 5 BRAKES Front brake Ventilated discs Ventilated discs Rear brake Drums Drums SUSPENSIONS Front suspension Coil type Coil type Rear suspension Torsion bar Torsion bar TYRES Tyre dimension 165/70R14 165/70R14 EXTERIOR GL- Manuall gearbox GL 5D 998e AT Wheels Steel with hubcap Steel with hubcap Bumper - Front&Rear Body colour Body colour Door mirrors Body colour Body colour INTERIOR & COMFORT GL- Manuall gearbox GL 5D 998e AT Parking sensor Rear Rear Power Steering Upholstery Fabric Fabric Steering wheel Urethane Urethane Central door locking Yes Yes Power windows Front Front Air conditionning Manual Manual CFAO reserves the right to modify its visuels without notice, likewise their characteristics, equipment and accessories. Pictures are not contractual. Connections USB , Aux , Bluetooth USB , Aux , Bluetooth Radio Radio CD / MP3 Radio CD / MP3 PASSIVE SAFETY GL- Manuall gearbox GL 5D 998e AT Spare wheel Steel Steel Airbags Driver , Passenger Driver , Passenger ACTIVE SAFETY GL- Manuall gearbox GL 5D 998e AT Headlamps Halogen Halogen ABS CFAO reserves the right to modify its visuels without notice, likewise their characteristics, equipment and accessories.
    [Show full text]
  • Operator's Manual: Dry and Refrigerated Trailers
    OperatOr’s Manual Dry and refrigerated Van trailers This manual contains important safety information. Read manual carefully. Keep manual with trailer at all times. Part Number: 25001308 Rev. A Warranty Your Wabash National® trailer warranty is defined in your Purchase Agreement and its detailed Terms and Conditions. If you believe you have a valid warranty claim, please contact your sales representative or Wabash National customer service for assistance. Wabash National Warranty Department: (765) 771-5404 Normal Trailer Use Statement Your Wabash National® trailer is designed, engineered, and manufactured to provide years of safe, dependable service. To ensure reliable service, the trailer must be properly maintained and used in normal service, free from accident or collision damages. “Normal service” means the loading, unloading and carriage of uniformly distributed legal loads of non-corrosive, properly secured cargo. The vehicle must be operated on well-maintained public roads. Gross vehicle weights must not exceed the labeled gross vehicle weight rating. Table of CoNTeNTS INTRODUCTION ...................................... 1 Brake Air System ..................................19 Message to the Owner and Operator ..... 1 Anti-Lock Brake System ....................... 21 Identification ........................................... 1 Foundation Brake System .................... 23 How to Use This Operator’s Manual ...... 3 Air-Ride Suspension .............................26 Trailer Accessories ................................. 3 Leaf Spring
    [Show full text]
  • Meritor Front Non-Drive Steer Axles Technical Bulletin with Unitized Wheel-End Hubs
    TP-0436 Issued 02-04 Removing the Unitized Hub Inner Bearing Cone from the Spindle All Meritor Front Non-Drive Steer Axles Technical Bulletin with Unitized Wheel-End Hubs WARNING YOU MUST FOLLOW THE UNITIZED WHEEL-END MAINTENANCE PROTECTIVE UNITIZED AND INSPECTION PROCEDURES PROVIDED IN THIS BULLETIN HUBCAP WHEEL END TO PREVENT SERIOUS PERSONAL INJURY AND DAMAGE TO INNER OUTER WHEEL COMPONENTS. WHEEL BEARING BEARING NUT ț UNITIZED WHEEL ENDS ARE NOT ADJUSTABLE. NUT ț DO NOT ATTEMPT TO SET OR ADJUST END PLAY. O-RING INNER “D” How to Obtain Additional Maintenance and TABBED WASHER Service Information WASHER 1000063e Refer to Maintenance Manual 2, Front Non-Drive Steer Axles. To Figure 1 obtain this publication, call ArvinMeritor’s Customer Service Center at 800-535-5560, or visit the Tech Library on our website B. For snap-ring hubcaps, insert a screwdriver into the at arvinmeritor.com. notched end of the snap ring. Figure 2. Remove the snap ring by moving the screwdriver around the circumference Remove the Wheel Ends of the ring. Remove the snap-ring hubcap. WARNING To prevent serious eye injury, always wear safe eye protection when you perform vehicle maintenance or service. Park the vehicle on a level surface. Block the wheels to prevent the vehicle from moving. Support the vehicle with safety stands. Do not work under a vehicle supported only by jacks. Jacks can slip and fall over. Serious personal injury and damage to components can result. 1. To prevent serious eye injury, always wear safe eye protection 4000303c when you perform vehicle maintenance or service.
    [Show full text]
  • 2007 Chevrolet Trailblazer Owner Manual M
    2007 Chevrolet TrailBlazer Owner Manual M Seats and Restraint Systems ....................... 7 Instrument Panel ....................................... 165 Front Seats .............................................. 8 Instrument Panel Overview ................... 168 Rear Seats ............................................. 18 Climate Controls ................................... 185 Safety Belts ............................................ 20 Warning Lights, Gages, and Child Restraints ...................................... 42 Indicators .......................................... 195 Airbag System ........................................ 71 Driver Information Center (DIC) ............ 216 Restraint System Check ......................... 90 Audio System(s) ................................... 234 Features and Controls ................................ 93 Driving Your Vehicle ................................. 299 Keys ....................................................... 95 Your Driving, the Road, and Doors and Locks .................................. 100 Your Vehicle ..................................... 300 Windows ............................................... 107 Towing ................................................. 356 Theft-Deterrent Systems ....................... 109 Service and Appearance Care .................. 379 Starting and Operating Your Vehicle ..... 112 Service ................................................. 382 Mirrors .................................................. 132 ® Fuel .....................................................
    [Show full text]