AUCTION HUGE QUANTITY OF SURPLUS MACHINERY FROM CATERPILLAR INC. & CATERPILLAR SUPPLIERS CONSOLIDATED INTO ONE LOCATION FOR EASE OF SALE FEATURING: CNC Floor & Table Type Horizontal Mills, Floor & Table Type Horizontal Boring Mills, CNC Vertical Boring Mills, High Column Vertical Boring Mill, Rotary Tables, CNC Horizontal & Vertical Centers, CNC Mill, Jig Mill, CNC Hollow Spindle , CNC Lathe, CNC Twin Spindle Chucker, CNC Chuckers, Single Spindle Automatic Chuckers, Multi-Spindle Automatic Chucker, Single Spindle Automatic Bar Machines, Automatic Screw Machine, Engine , Turret Lathes, Jig Borers, Boring Machines, Mills, Grinders, , Hones, Machine, Centerless Lapper, Bolt Threader, Balancer, Gear Hobbers, Gear , Pressbrakes, Presses, Bandsaws, Straighteners, C.M.M., Much Much More!

CATERPILLAR AUCTION LOCATION 515 South Maxwell Road PEORIA, ILLINOIS 61607 (See Directions on Back Page)

TUESDAY DECEMBER 2 10:00 A.M.

INSPECTION: Monday, December 1, 9:00 A.M. to 4:00 P.M. & Morning of Sale

A 10% BUYER’S PREMIUM WILL APPLY BULLARD DYNATROL 56" HIGH CNC COLUMN VERTICAL BORING MILL MAZAK MDL. H800 CNC HORIZONTAL MACHINING CENTER

< LEBLOND 50" X 200" ENGINE LATHE

> LVD 330 T. CAP. CNC HYDRAULIC PRESSBRAKE Read Terms and Conditions on Back Page of Brochure

Sale Conducted By: Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 PLANT & MACHINERY INC. Houston, TX 77043 AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE PHONE: (713) 691-4401 FAX: (713) 672-7905 Plant & Machinery Inc. IL #044.000219 E-MAIL: [email protected] Robert Braman IL #041.0000725 • Ronald Moore IL #041.0000726 WEBSITE: www.pmi-auction.com AUCTION CATERPILLAR AUCTION LOCATION 515 South Maxwell Road PEORIA, ILLINOIS 61607 (See Directions on Back Page) TUESDAY, DECEMBER 2 10:00 A.M. INSPECTION: Monday, December 1, 9:00 A.M. to 4:00 P.M. & Morning of Sale CNC GIDDINGS & LEWIS MDL. G60-TX TABLE TYPE HORIZONTAL BORING MILL

CNC FLOOR TYPE CNC TABLE TYPE HORIZONTAL BORING MILLS HORIZONTAL BORING MILLS GIDDING & LEWIS MDL. G60FX, Numeripath 800M CNC control, 6" LUCAS MDL. 30T66, Allen Bradley 7320 CNC control, dims.:18' x 24-1/2 x 14'-8" spdl., 168" X-axis cross travel, 72" Y-axis vert. travel, 48" Z-axis spdl. ht., 5" spdl., (23) spdl. spds.: 9Ð1,400 RPM, 30 HP motor, 48" x 84" table, 72" X-axis travel, spdl. spds.: 25Ð1,120 RPM, 30 HP motor, Cat 50 spdl. taper, cross travel, 72" Y-axis vert. travel, 36" Z-axis spdl. travel, 48" W-axis in and out 40 pos. auto. changer, coolant through spdl., 12" anti-friction travel, #50 spd. taper, pwr. drawbar, S/N 30T0139. barrel type spdl. suppt., S/N 455-008-79. GIDDING & LEWIS MDL. G60-TX, Gidding & Lewis 800M CNC control, 6" spdl., 60" X-axis travel, 72" Y-axis travel, 36" Z-axis travel, 51" W-axis travel, (2) 48" x LUCAS MDL. 40F206, Allen Bradley 7320 CNC control, 6" spdl., 60" pallets, infinitely variable spdl. spds.: 5Ð1,120 RPM, 40 HP motor, 3-way 240" X-axis cross travel, 72" Y-axis vert. travel, 48" Z-axis spdl. travel, column, 40 pos. auto. tool changer, Cat 50 spdl. taper, flood coolant through spdl., 12" quill w/12" travel, spds.: 5.6Ð1,120 RPM, 50 HP spdl. drive motor, built-in w/pallet shuttle, S/N 45010681. #50 spdl. taper, full length chip conveyor, full pendant control, hard way covers on bed, S/N 40T0163. TABLE TYPE HORIZONTAL BORING MILLS WOTAN, new 1980, 5" spdl., 84" X-axis cross travel, 72" Y-axis vert. travel, 36" FLOOR TYPE Z-axis spdl. travel, 82" W-axis saddle travel, spdl. spds.: 2.5Ð1,000 RPM, 30 HP HORIZONTAL BORING MILLS motor, 67" x 60" table, #50 spdl. taper, pwr. drawbar, pendant control, auto. lubrication, outriggers, Commando/Accurite D.R.O. w/positioning system, SCHARMANN MDL.WB80-V, 9'-6" X-axis vert. travel, 9'-6" Y-axis hz. S/N 42088. travel, 24" Z-axis spdl. travel, (2) spdl. spds.: 8Ð750 RPM, 5/7-1/2 HP spdl. motor, pendant control, Acu-Rite 2-axis D.R.O., S/N 7515/60. GIDDINGS & LEWIS 5", Mdl. 70-D5-T, 60" x 146" table, 132" cross travel, 60" saddle travel in and out, 102" vert. travel, 30" spdl. travel, 5" spdl., spdl. spds.: GRAY MDL. 660F, 32' X-axis hz. travel, 10' Y-axis vert. travel, 48" Z- 7.5Ð975 RPM, 10 HP spdl. motor, hard bed and saddle ways, pendant control, axis spdl. travel, 6" spdl., 50 MT spdl. taper, spds.: 1Ð880 RPM, 50 HP outriggers to each side of saddle, Itek 3-axis D.R.O., S/N 150-1079-67. motor, Sony 3-axis D.R.O., chip conveyor, pendant control, S/N 9570. GIDDINGS & LEWIS MDL. D5-T, 5" spdl., #50 spdl. taper, 84" X-axis travel, 64" Y-axis vert. travel, 36" Z-axis spdl. travel, 64" W-axis saddle travel, 48" x 96" table, spds.: 7.5Ð975 RPM, 30 HP motor, 26" dia. head, hardened bed FLOOR PLATES and saddle ways, outriggers, coolant system, pwr. drawbar, pendant control, S/N (2) 84" X 169" X 12" THICK, T-slotted. 150-1143-71.

< GIDDINGS & LEWIS MDL. D5-T TABLE TYPE HORIZONTAL BORING MILL

> BULLARD DYNATROL 56" HIGH COLUMN VERTICAL BORING MILL 2 CNC HORIZONTAL MACHINING CENTERS MAZAK H1000, new 1990, (2) 39" sq. rotary shuttle pallets, 64.5" X-axis travel, 48" Y-axis travel, 39" Z-axis travel, 4,000 RPM, Fanuc 11-M CNC control, 40 HP, 80 pos. tool changer, flood and through spdl. coolant, chip conveyor, S/N 81737. MAZAK MDL. H800, new 1990, Mazatrol M-32 CNC control, 49.2" X-axis travel, 39.3" Y-axis travel, 33.4" Z-axis travel, spdl. spds.: 40Ð5,000 RPM, 35 HP motor, (6) 31-1/2" rotary pallets, 40 pos. auto. tool changer, chip conveyor, 42.5" max. spdl. centerline height, tool length measurements, part proving, through spdl. coolant, 12" spdl. extension, pallet shuttle system, full enclosure, flood coolant, stainless way covers, S/N 89712. MAZAK MDL. H-15, new 1986, Fanuc 6M CNC control, 36" X-axis travel, 28" Y-axis travel, 28" Z-axis travel, spdl. spds.: 22Ð5,000 RPM, 15 HP motor, #50 spdl. taper, (2) 25" x 25" pallets, 40 pos. auto. tool changer, S/N 55542. MACHINING SYSTEM MDL. HMC-100, new 1988, Dynapath Delta CNC control, 100" X-axis travel, 36" Y-axis travel, 40" Z-axis travel, spdl. MAZAK MDL. H800 CNC HORIZONTAL MACHINING CENTER spds.: 0Ð2,400 RPM, Cat 50V flange, (5) 39" x 48" pallets, 5-station pallet changer, coolant through spdl., 4" spdl. extension, 76 pos. auto. tool changer. BOHLE, Giddings & Lewis 8000B CNC control, retrofitted in 1997, CNC VERTICAL BORING MILLS 50" X-axis horiz. travel, 40" Y-axis vert travel, 45" Z-axis long. travel, (2) GIDDINGS & LEWIS 42", Numeripath 8000-L CNC control, 52" sw., 46" 28" x 36" shuttle tables, 40 pos. auto. tool changer, 40 HP motor. under rail, 38" ram travel, 22" rail travel, spds.: 5Ð400 RPM, 75 HP motor, KEARNEY & TRECKER MDL. 180, Kearney & Trecker D CNC control, 45 pos. auto. tool changer, Renishaw probing, pendant control, tool changer, 20" X-axis travel, 20" Y-axis travel, 20" Z-axis travel, #50 taper, (2) chip conveyor, flood and mist coolant, S/N 511-117-88. 16" x 16" pallets, 4,000 RPM, 10 HP motor, 30 tool changer, enclosure, GIDDINGS & LEWIS 42", Numeripath 8000 CNC control, 42" , 52" pallet enclosure, flood coolant through spdl. coolant, chip conveyor, sw., 46" under rail, spds.: 90Ð3,000 RPM, 60 HP motor, 22" rail travel, 38" way covers, S/N 7182759. ram travel, #60 Ans taper, 45 pos. auto. tool changer, chip conveyor, S/N 511-118-88. CNC JIG MILL DeVLIEG 5", Mdl. 5K144, Allen Bradley 7300 CNC control, #50 taper spdl., (19) spdl. spds.: 10Ð1,000 RPM, 20/10 HP motor, (16) spdl. fds.: HIGH COLUMN VERTICAL BORING MILL .0013Ð.167 IPM, 84" vert. travel, 50" x 144" table, 144" table cross BULLARD DYNATROL 56", 50" cross rail vert. travel, 60" vert. ram travel, travel, 24" table retraction operator’s platform, S/N 9644. 60" max. under rail, 52-3/4" side head vert. travel, 32" side head cross travel, spdl. spds.: 6.8Ð250 RPM, 60 HP motor, 56" dia. 3-jaw chuck, ram and side JIG MILL heads - each w/(4) indexing pos., 2" spd. table drive motor, S/N 32227. DeVLIEG MDL. 2B-36, 2-1/2" spdl. dia., 40" taper, spds.: 42Ð2,000 RPM, 5.6 HP motor, 24" x 36" table, 36" X-axis table cross travel, ROTARY TABLES 36" Y-axis vert. travel, 12" Z-axis spdl. travel, 12"W table retraction, CINCINNATI GILBERT 72" X 96", 360 deg. pos. index, outriggers, (9) T-slots. pwr. drawbar, way cover, D electrics, Spiramatic spdl. head, auto. pos., work light, barfeed depth control, S/N 14000. 48" GIDDINGS & LEWIS SQUARE MANUAL AIRLIFT ROTARY TABLE. CAMCO, 3-1/2', 360 deg. motion, 8:1 ratio, constant lead cam. GRAY 108" X 168" POWER SLIDING ROTARY TABLE, rebuilt 1998, 25 T. cap., 60" longitudinal travel.

PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at: www.pmi-auction.com.

CNC DEVLIEG 5" MDL. 5K144 CNC JIG MILL DEVLIEG MDL. 2B-36 JIG MILL 3 8-1/4" HOLE

CNC CNC PRATT & WHITNEY MDL. STAR TURN 1800 CNC HOLLOW SPINDLE LATHE CINCINNATI MDL. 10VC 1000 CNC VERTICAL MACHINING CENTER

TUESDAY DECEMBER 2 AUCTION 10:00 A.M. CATERPILLAR AUCTION LOCATION 515 South Maxwell Road • PEORIA, ILLINOIS 61607 (See Directions on Back Page)

CNC VERTICAL CNC TWIN SPINDLE CHUCKER MACHINING CENTERS EXCELLO 24", Mdl. 452, Fanuc O-T CNC control, retrofitted CINCINNATI MDL. 10VC 1000, Acramatic 900 control, 20" x 40" 1996, 18" X-axis travel, 24" Y-axis travel, 39.25" spdl. nose to table 40" X-axis travel, 20" Y-axis travel, 20" Z-axis travel, 25" max. bottom of base, (2) 24" dia. 3-jaw chucks, (2) 6 pos. turrets, 30" spdl. to table clearance, Cat 45 taper, spdl. spds.: 25Ð4,000 RPM, sw., spdl. spds.: 30Ð900 RPM, 75 HP motor, S/N R4520007. 10 HP drive motor, fds.: .1Ð400 IPM, coolant pan and pump, thermal transfer oil cooler, RS serial port, flood coolant, Teleflex CNC CHUCKERS telescoping way covers, S/N 49540. WARNER & SWASEY MDL. 2SC, retrofitted in 2001, GIDDINGS & LEWIS MDL. 15VFC, Numeripath 3-axis CNC MDSI open architech control, 18" hi/lo air chuck, spdl. control, 44" X-axis control, 36" Y-axis control, 20" Z-axis control, spds.: 27Ð1,204 RPM, 75/50/37 HP spdl. drive motor, 5" 15 HP motor, 40 pos. auto. tool changer, 36" vert. pos., S/N 988- hole through spdl., 18-3/4" max. spdl. to turret face, 10 01002-73. station turret, 27" long. work area, 12" long. stroke, Trabon, chip conveyor, coolant system, S/N 3030097. CNC HOLLOW SPINDLE LATHE (3) WARNER & SWASEY MDL. 3SC-24, Allen Bradley 7360 PRATT & WHITNEY MDL. STAR TURN 1800, Fanuc GN11T CNC CNC control, Cushman 24" dia. 3-jaw dual pressure chuck, control, retrofitted 1988, 34" sw. over ways, 26" sw. over carriage, A1-15 spdl., 39" sw., 33" center to center, 8.25" through hole, 80-3/4" center to center, 8-1/4" spdl. hole, 12 pos. turret, 80" cross 12 pos. turret, spds.: 19Ð838 RPM, 60 HP motor, 12 pos. turret, travel, spds.: 9Ð900 RPM, 50 HP motor, front and rear 3-jaw 12.375" X cross stroke, 15" Z long., 2-axis contouring, self-contained pwr. chucks, w/8" holes, chip conveyor, tailstock, enclosure, pwr. chuck, chip conveyor, spdl. load meter, S/N S/N 5072-0092. 2852696, 2852697, 2829883.

CNC CNC CNC GIDDINGS & LEWIS MDL. 15VFC CNC EXCELLO 24" MDL. 452 CNC WARNER & SWASEY MDL. 3SC-24 VERTICAL MACHINING CENTER TWIN SPINDLE CHUCKER CNC CHUCKER 4 6-1/4" HOLE

WARNER & SWASEY MDL. 3A GOSS & DELEEUW MDL. 1-2-3 MULTI-SPINDLE LEBLOND 40" X 108" “HEAVY DUTY” AUTOMATIC CHUCKER ENGINE LATHE

SINGLE SPINDLE ENGINE LATHES AUTOMATIC CHUCKERS LeBLOND 50" X 200" “HEAVY DUTY”, 36" dia. 3-jaw chuck, 18" dia. 4-jaw chuck on tailstock, #5 MT tailstock (2) WARNER & SWASEY MDL. O-AC, 6-1/2" sw. over slides, 5-1/2" taper, 3" hole, 36" sw. over crosslide, 50" sw. over bed, max. stroke, 4-9/64" centerline of spdl. to turret face, 16-5/8" max. dist. 210" center to center dist., (36) spdl. spds.: 5Ð600 RPM, spdl. to head, spdl. spds.: 58Ð2,507 RPM, 7.5/5 HP motor, (5) 75 HP motor, 23-1/2" crosslide travel, 8-1/4" riser, hard- multiple turning heads, chuck, front and rear cut-off slides, ened ways, taper attach., inch thdng., rapid traverse, long. S/N 2532852 and S/N 2803132. Trav-A-Dial, 28" cap., 22" cap., and (2) 13" cap. roller tip steadyrests, coolant system, Farrand 2-axis D.R.O., misc. MULTI-SPINDLE tooling, S/N 3NK990. AUTOMATIC CHUCKER LeBLOND 40" X 108" “HEAVY DUTY”, 3" spdl. bore, 40" GOSS & DELEEUW MDL. 1-2-3 - 6-SPINDLE, (4) chucks on turret, sw. over ways, 25" sw. over crosslide, 108" center to center dist., (27) spdl. spds.: 5Ð600 RPM, 60 HP motor, (54) fds.: 2.7" O.D. boring spdl., 2.7" O.D. thdng. spdl. 2,400 RPM max. spdl. .005Ð.308, chip conveyor, coolant, D.R.O., pwr. rapid traverse, spds., S/N 2522. 2-axis, compound rest pwr. feed, S/N 3NK1006. SINGLE SPINDLE AUTOMATIC MONARCH 25" X 96". CINCINNATI 18" X 102" “TRAY TOP”, 1.75" spd. bore, 19" BAR MACHINES sw. over ways, 11" sw. over crosslide, 102" center to center (3) WARNER & SWASEY MDL. 1AB, 2" rd. bar cap., spds.: 36Ð2026 distance, (12) spdl. spds.: 25Ð980 RPM, 5 HP motor, fds: RPM, 6-1/4" max. work length, 7-1/4" max. stroke, barfeed, collet chuck, .0019Ð.1215, 12" dia. 3-jaw chuck, coolant, chip trays, chip parts catcher, S/N 2619228, 2002689, 2074901. guards, standard thdng., S/N 1W455M-25. AMERICAN PACEMAKER 16" X 126", 1-3/4" spdl. bore, AUTOMATIC SCREW MACHINE 20" sw. over ways, 12" sw. over crosslide, 132" center to BROWN & SHARPE MDL. 2G, 2"L. x 1-1/2" dia. workpiece, 1-1/2" cap., center dist., spdl. spds.: 25Ð1,500 RPM, 12" dia. 4-jaw spds.: 200Ð3,025 RPM, 7-1/2 HP motor, 1.6:1 to 13:1 spd. rotation, 6 chuck, coolant pans, carriage and apron steadyrest, tail- tool pos. turret, front and rear tool slides, vert. cut-off slide, collet chuck, stock, S/N 70791-42. coolant system, S/N 13359. TURRET LATHES WARNER & SWASEY MDL. 3A, 59" max. dist. spdl. to tur- ret, (32) spds.: 9Ð638 RPM, 50/25 2-spd. motor, 6-1/4" PROXY BIDS hole, (16) fds.: .005Ð.1677, 21" chuck, 23-1/2" sw. over If you cannot attend this sale we will bid on your behalf. Contact bed, 14-3/8"Ð51" crosslide travel, 18" sw. over crosslide, 1-36 TPI, crossliding turret, hardened ways, misc. tooling, Houston office at (713) 691-4401 for instructions, quick change gear box, full length leadscrew, thdng. to both or go to our website at: www.pmi-auction.com. saddles, front and rear taper attachments, S/N 2107243. HERBERT MDL. 9C-30, spds.: 10Ð700 RPM, 50 HP main motor, fds.: .0004Ð0149 IPR, 35" sw. over ways, 26" sw. over crosslide, 9-1/2" spdl. hole, A2-15 spdl. nose, 38" max. thd. chasing length, 54" spdl. nose to turret face, rapid reverse, taper attach. on saddle and turret, full length lead- screw thdng., coolant system, 6 pos. adj. kick-out saddle and turret slide, chip pan, guard pendant control, hard ways, Cushman 24" dia. 4-jaw chuck, S/N 35-13585-EE.

> HERBERT MDL. 9C-30 9-1/2" TURRET HOLE LATHE

LEBLOND 50" X 200" “HEAVY DUTY” ENGINE LATHE 5 AUCTION

CATERPILLAR AUCTION LOCATION 515 South Maxwell Road PEORIA, ILLINOIS 61607 (See Directions on Back Page)

TUESDAY DECEMBER 2 10:00 A.M. INSPECTION: Monday, December 1, 9:00 A.M. to 4:00 P.M. CNC & Morning of Sale BRIDGEPORT CNC VERTICAL MILL PRATT & WHITNEY MDL. 2A JIG BORER

JIG BORERS BED TYPE HORIZONTAL MILL PRATT & WHITNEY MDL. 2A, 16" x 32" table, 20" X-axis travel, CINCINNATI VERCIPOWER, 86" x 20" table, 42" cross travel, 16" 12" Y-axis travel, 3"Ð24" dist. table to spdl., 10"Ð22" dist. table to in and out travel, 18" vert. knee travel, S/N na. column, 15" column travel, 9" quill travel, 4-1/2" quill dia., 2-1/2" spdl. max. taper collet, spds.: 37Ð1,800 RPM, slide attach. plug in, low, medium and high speeds, DeVlieg “flash change” tool- KNEE TYPE HORIZONTAL MILL holder, S/N 1620-1252-55. CINCINNATI PLAIN DIAL TYPE, with 90 deg. head, S/N 2A4P1L-31. SIP MDL. MP5E, 30" x 36" table, S/N 401. VERTICAL MILLS BORING MACHINES CINCINNATI TOOLMASTER, 10" x 48" table, 28" cross travel, 18" (2) HEALD MDL. 47A, (2) Red Head spdls., 16" x 24" table, 26"W. in and out travel, 16" vert. knee travel, 3-1/2" quill, 5" quill travel, bridge 14" table travel, 10.75" spdl. center to table, (1) right angle variable pwr. table feeds, variable spdl. spds.: 85Ð3,800 RPM, table and (1) crosslide table fixture, S/N 25776, S/N na. 2 HP motor, pwr. table feed, #30 taper, pwr. quill feed, mist coolant, CNC VERTICAL MILL S/N 5531D5W-0084. BRIDGEPORT, Bridgeport CNC control, 12" x 34" table, 18" BRIDGEPORT SERIES 1, 9" x 24" table, 30" cross travel, 12" in cross travel, 12" in and out travel, 16" vert. knee travels, 5" quill and out travel, 16" vert. knee travel, 5" quill travel, swivel and tilt travel, spdl. spds.: 60Ð4,200 RPM, 2 HP motor, worklight, coolant head, R-8 spdl. taper, variable spds.: 500Ð4,200 RPM, system, auto. lube system, S/N CNC 3308. 2 HP head motor, chip guards, S/N BR201531.

INDUMA SUPERMILL UNIVERSAL MILL BRIDGEPORT SERIES 1 CINCINNATI HYPOWERMATIC MDL. 550-266 VERTICAL MILL SIMPLEX MILL 6 CINCINNATI HYPOWERMATIC MDL. 500-2610 SIMPLEX MILL VIEW OF CINCINNATI MDL. 550-224 22" X 72" TABLE DUPLEX MILL

UNIVERSAL MILL DUPLEX MILLS INDUMA SUPERMILL, 16" x 79" table, #50 taper, spdl. spds.: CINCINNATI MDL. 550-306, 30" x 96" table, 74" table travel, 25Ð1,520 RPM, 15 HP motor, 57" X-axis travel, 16" Y-axis travel, spdl. spds.: 20Ð800 RPM, 50 HP motor, (2) Acramatic variable 12"W-axis travel, 4" vert. ram travel, coolant system, motorized knee, arbor suppt., overarm, worklight, drawbar, partial pendant cycle controls, rise and fall, S/N 311453078-0003. control, full universal milling head w/5" quill, one shot lube, S/N na. CINCINNATI HYPOWERMATIC MDL. 540-226, 22" x 84" table, 60" table travel, spdl. spds.: 20Ð800 RPM, 40 HP motor, SIMPLEX MILLS dial feed, column tire bar, 10" spd., quill retraction, Allen CINCINNATI HYPOWERMATIC MDL. 500-2610, spds.: 20Ð800 Bradley Square D electrics, S/N 6135105P-3. RPM, 40 HP spdl. motor, 120" table travel,18.25" center table to center spdl., 26" x 144" table, hyd. rise and fall, coolant system, CINCINNATI MDL. 540-226, 22" x 96" table, 72" table travel, pwr. drawbar, overarm, pwr. quill, variable spd., hyd. shift, pendant spds.: 20Ð800 RPM, 40 HP motor, (2) quill retractions, auto- control, auto. cycle, 3-axis D.R.O., table feed w/rapid pwr. carrier, cycle, pendant control, auto. lube, rapid reed, coolant system, S/N 311453P75-003. pwr. quill advance, drawbar, S/N 311452P73-0004. CINCINNATI HYPOWERMATIC MDL. 550-266, 26"W. x 8'L. table, CINCINNATI MDL. 550-224, 22" x 72" table, 48" table travel, 74" table travel, spds.: 20Ð800 RPM, 50 HP motor, hyd. unit, auto. quill retraction, dial feeder, elec. box, arbor suppt., S/N 311453P5-003. (16) spdl. spds.: 20Ð800 RPM, 50 HP motor, 5" T-slotted table, auto. quill retraction, S/N 6B50D5T-1. FACE MILL GRINDER CINCINNATI MDL. 420-224, 22" x 80" table, 48" table travel, OLIVER MDL. 624, 6"Ð18" cap., 6"Ð18" carriage movement, 5" ram spds.: 15Ð1,200 RPM, 20 HP motor, 13-1/4" spdl. to center, auto. movement, 6"Ð10" wheel cap. quill retraction, dial feeds, drawbar bolts, auto. quill retractions, misc. spd. gears, Allen Bradley mtd. electric, S/N 6B3105C-01. CINCINNATI MDL. 320-184, 18" x 72" table, 48" table travel, spdls. spds.: 50Ð2,000 RPM, 20 HP motor, pendant control, PROXY BIDS auto. quill retraction, S/N 311431073-1. If you cannot attend this sale we will bid CINCINNATI MDL. 320-183, 18" x 60" table, 3' table travel, on your behalf. Contact Houston office at spdl. spds.: 50Ð2,000 RPM, S/N 311431D78-0001. (713) 691-4401 for instructions, or go to our FRITZ WERNER, 60" x 14" bed, 47.3" long. travel, 9" manual quill travel, 22-1/2" vert. travel, spds.: 45Ð1,400 RPM, rapid tra- website at: www.pmi-auction.com. verse, S/N 21479.

OLIVER MDL. 624 FACE MILL GRINDER CINCINNATI MDL. 50-306 DUPLEX MILL CINCINNATI MDL. 320-184 DUPLEX MILL 7 CNC CARLTON 4' X 11" RADIAL ARM BURGMASTER MDL. T-340 CNC TURRET DRILL

CARLTON 4' X 11", Mdl. 1A, spdl. spds.: 80Ð2,000 RPM, 7-1/2 HP RADIAL ARM DRILLS motor, #4 MT, 12" spdl. travel, 15" min. to 55" max. dist. spdl. to base, CARLTON 6' x 17", 3-3/16" spindle, #5 MT, 18" spindle travel, 17" min. to 48" max. dist. spdl. to column, pwr. clamping, worklight, 12Ð1,200 RPM, feeds .004Ð.125 IPR, 7' max. distance spindle 26" x 18" x 16" 2-sided T-slotted box table, S/N 1A 3894. to base, L-base, 12" riser, S/N 3A 4038. CARLTON 4' X 11", Mdl. 1A, 3" spdl. dia., 1-2/4" MT, 11" spdl.travel, CARLTON 5' X 17", 3-3/16" spindle, #5 MT, 18" spindle travel, spds.: 60Ð3,000 RPM, 24" min. to 40" dist. spdl. to base, 15" to 45" 12Ð1,200 RPM, feeds .004Ð.125 IPR, 6' max. distance spin- max. dist. spdl. to column, 24 x 18 x 18" box table, 18" rotary table, dle to base, S/N 4A 5542. S/N 1A 2482. CARLTON 5' X 13", 3-3/16" spindle, #5 MT, 18" spindle travel, AMERICAN HOLE WIZARD 4' X 9", 3" spdl. dia., spdl. spds.: 12Ð1,200 RPM, feeds .004Ð.125 IPR, 6' max. distance spindle 70Ð2,100 RPM, 50 HP motor, 8" spdl. travel, #4 MT, 20" min. to 50" to base, L-base, S/N 3A 4813. max. dist. spdl. to base, 12" min. to 48" max. dist. spdl. to column, worklight, coolant system, S/N 75216-56. CARLTON 5' X 13", 3.25" spdl. dia., #5 MT, 18" spdl. travel, spdl. spds.: 10Ð1,000 RPM, 15 HP motor, fds.: 6Ð125 IPR, CARLTON 4' X 9", 2.5" spdl. dia., 12" spdl. travel, spds.: 80Ð2,000 60" max. dist. spdl. to base, 71" max. dist. spdl. to column, RPM, 5 HP motor, 14" min. to 53" max. dist. spdl. to base, 16" min. to coolant system, pwr. head travel, pwr. head clamp, pwr. 55" max. dist. spdl. to column, #4 MT, coolant system, worklight, elevation, worklight, tapping, S/N 3A 3310. S/N 1A 4094. CARLTON 5' X 13", 3.25" spdl. dia., #5 MT, 18" spdl. travel, spdl. spds.: 12Ð1,200 RPM, 15 HP motor, 10-1/2" min. to 60" CNC TURRET DRILLS max. dist. spdl. to base, 26" min. to 71" max. dist. spdl. to BURGMASTER MDL. 3BHTL-3H, Fanuc GNII CNC control, 35" column, pwr. elevation, pwr. clamping, pwr. traverse, pwr. head X-axis travel, 20" Y-axis travel, 20" Z-axis travel, 12" turret travel, 48" clamp, coolant system, S/N 3A 4740. x 32" table, turret w/tapping, boring and milling, contour milling capability, 3-axis, coolant system, worklight, S/N 3650. DIMCO 5' X 13", Mdl. TR #2, 3" spdl. dia., #40 MT, 10" spdl. travel, spdl. spds.: 2Ð1,000 RPM, 8.5 HP motor, 10" min. to 46" BURGMASTER MDL.T-340, Allen Bradley 7320 CNC control, 33" x max. dist. spdl. to vase, 11" min. to 56" max. dist. spdl. to column, 48" table, 48" Z-axis travel, 32" Y-axis travel, 12" Z-axis travel, 18" W- S/N 1650. axis travel, 2" max. cap., spdl. spds.: 30Ð2,000 RPM, 15 HP motor, #45 spdl. taper, 8 pos., pendant control, 8 spdl. turret, coolant CARLTON 4' X 11", S/N 1A-4196 system, turret indexing, way covers, S/N 330 162. CARLTON 4' X 11", #5 MT, coolant, S/N 1A4232. CARLTON 4' X 11", 3.25" spdl. dia., #5 MT, 18" spdl. travel, AUTOMATIC UP-FEEDING DRILL spdl. spds.: 10Ð2,000 RPM, 7.5 HP motor, 10-1/2" min. to 60" SNOW MDL. 1-UA, 12" x 21" table, 8" throat, (8) spds.: 950Ð6,750 max. dist. spdl. to base, 12" to 48" max. dist. spdl. to column, RPM, air operated up-feeding table, air operated master fixture 612, coolant system, pwr. head travel, pwr. head clamp, pwr. deep hole drill control, 2-spdl. drill attach., 1/3 HP main drive motor, elevation, worklight, tapping, S/N 1A 4196. S/N 59075.

ARE YOU SELLING YOUR PLANT? CALL 1-800-282-8466 FOR A CONFIDENTIAL CONSULTATION

DIMCO 5' X 13" MDL. TR #2 RADIAL ARM DRILL 8 STAR 2-SPINDLE HYDRAULIC CARLTON 4' X 11" RADIAL ARM DRILL

HYDRAULIC GUN DRILL STAR 2-SPINDLE, 12" dist. btn. spdls., 56" stroke, (2) 10 HP spdl. drive motors, 10 cu. IPM stock removal, 2" drill cap., 20 HP coolant pump, filter system, Hanson oil chiller, oil tank and accumulators, chip conveyor, pick-off trans., S/N A-0004. MULTI-SPINDLE DRILLS NATCO 36-SPINDLE, Mdl. E4B, 1-1/4" upper spdl. dia., 21-3/4" x 44-1/2" rect. head work area, 54" max. head to base, auto. lube, 25 HP motor, pecking, coolant system, S/N E4B-163. NATCO 36-SPINDLE, Mdl. F4B, 1" O.D. and 7/8" I.D. upper drivers, 30" x 48" inside head area, 20 HP motor, S/N F4B-187. NATCO 24-SPINDLE, 3/4" upper spdl. dia., 15" x 24" work area, (24) spds.: 178Ð2,650 RPM, fds.: 1Ð26.5 IPM, 16" stroke, 22" min. to 42" max. head to base, 19" x 28" table, 9" riser, step cycle, tapping, S/N H6-1332. NATCO 24-SPINDLE, 3/4" upper spdl. dia., 17" x 33" work head, spds.: 12Ð3,550 RPM, 23" min. to 39" max. head to base, 14" riser block, S/N H6-1775. NATCO 24-SPINDLE, 3/4" upper spdl. dia., 29" x 14" work head, spds.: 20Ð2,750 RPM, 26" min. to 42" max. head to base, 12" riser block, step drill and tap, S/N K6-1633. SNOW MDL. 1-UAD AUTOMATIC UP-FEEDING DRILL

NATCO 36-SPINDLE MDL. F4B NATCO 36-SPINDLE MULTI-SPINDLE DRILL NATCO 24-SPINDLE MULTI-SPINDLE DRILL MULTI-SPINDLE DRILL 9 CNC LANDIS 18" X 120" MDL. 4R HANCHETT ROTARY SURFACE GRINDER

CNC CYLINDRICAL GRINDERS SURFACE GRINDER LANDIS 18" X 120", Mdl. 4R, Allen Bradley 7300 CNC control, 18" sw., REID 6" X 18", 8" max. wheel cap., 1-1/2" hole wheel 120" dist. btn. centers, 30" x 6" x 20" wheel, 25 HP AC variable spd. arbor, 6" x 18" chuck, Hanchett Magna Lock Fine line motor, Marposs Mdl. E5 in-process gauging, ballscrew feed, chuck, 1 HP motor, 3,600 RPM, Reid direct drive spdl., steadyrest, way covers, splash guards, S/N 874-14. Bijur lube system, S/N 17682. KELLENBERGER MDL. K-601, new 1990, 13-3/4" swing, 34" distance between centers, swiveling wheelhead, 16" x 1-1/2" wheel capacity, internal grinding attachment, swiveling workhead, swiveling table, tailstock, ROTARY SURFACE GRINDER in-process gauging, Kellenberger K-601 CNC control, S/N 31-207-058. HANCHETT, 36" magnetic chuck, 18" , 18" under wheel, .008Ð.080 IPM, 30 HP spdl. motor, rapid PLAIN CYLINDRICAL GRINDERS downfeed, Neutrol 36" fine magnetic chuck, segmented NORTON 14" X 96", 24" sw., 30" x 6" wheel, Barnes filter, S/N 27476. wheel, wheel dresser, incremental downfeed, Bijur lube system, coolant base, S/N 36335. CINCINNATI 14" X 48",14-15/16" cap., 48" dist. btn. center, 14" x 1" x 5" wheel, 15" sw., 5 HP motor, S/N 35324EW001. CENTERLESS GRINDERS CNC ANGLE HEAD GRINDERS CINCINNATI MDL. 440-20, 1" min./10" max. dia. cap., (2) JONES & LAMSON 10" X 40", Allen Bradley 8200 CNC control, 24" 7.875" lower slide travel, 4.125" upper slide travel, 20" x 4" wheel, 17" sw. over bed, 2"Ð4" wheel flange width adj., spds.: 25.6Ð582 wheel width, spds.: 15Ð315 RPM, 40 HP motor, 24" grinding RPM, 2.9" tail retraction, work platen swivel ±0 deg., S/N 180116, S/N na. wheel, 14" regulating wheel, 6,500 RPM wheel spd., auto. wheel truing, PLC control, Trabon auto. lube gap eliminator, CNC SURFACE GRINDER auto. pin loader, S/N 350720477-7. BROWN & SHARPE 12" X 36", new 1986, Allen Bradley 8200 CNC control, dims: 12"W. x 36"L. x 18" ht., 15 HP variable wheel head, 16" x 2" INTERNAL GRINDER wheel, Walker 12" x 24" chuck, fds.: .5Ð1,200 RPM, coolant system, enclosure, variable feed on all 3 axes, S/N 523-6236-1021. CINCINNATI HEALD MDL. 171 GAUGEMATIC.

KELLENBERGER MDL. K-601 WINSLOMATIC MDL. HR HEALD MDL. 47A BORING MACHINE CNC CYLINDRICAL GRINDER DRILL POINT GRINDER 10 CINCINNATI MDL. 440-20 CENTERLESS GRINDER TIMESAVER SLAG GRINDER

TOOL & CUTTER SLAG GRINDER CENTERLESS LAPPER GRINDERS TIMESAVER, 24" operating width, 0"Ð6" operating CINCINNATI MDL. ED, new 1981, 0"Ð8" dia. height, 25" x 75" belt, 36" load/unload height, 30 BROWN & SHARPE MDL. 13, 8" x cap., 6.37 wheel bore, 7.5 HP/2 HP, 22" HP motor, dust collector, 60" entry conveyor, 48" table, 5" sw., 20" dist. btn. centers, grinding wheel, 14" regulating wheel, 600 pendant work station, (3) extra drums, Trabon 17" table travel, 3,400 RPM, 1 HP RPM wheel spd., 1"Ð6" travel, 1/2 T. boom lube, motor load meter, S/N 9950. motor, 10" x 2" wheel cap., 1/4 motor crane, coolant system, S/N 35122H81-0003. - 4 spd. driven headstock, 3-jaw workhead, Excello grinding head, HORIZONTAL HONES BOLT THREADER worklight table mtd. dresser, Trabon SUNNEN MDL. MBB 1650K, 3" min. and 6" lube, 3 x 1/2" wheel, S/N 52513761. max. I.D. range, 12" max. O.D., 18" swing, .001" ACME 2", 18" carriage travel, (8) spdl. CINCINNATI MDL. 2, 24-1/2" dist. size accuracy, .5 HP spdl. motor, 1 HP honing spds.: 30-38-49-61-74-93-121-152, 5 HP btn. tailstock and workhead, 5" x 39" head motor, worklight, cabinet of tooling and motor, S/N M17774. table, 10" sw., 30" dist. btn. centers, holders, S/N 63012. 16" table travel, 8" cross travel, SUNNEN MDL. MBC-18041, s/n 84714. BALANCER 10-1/2" vert. spdl. travel.worklight. GILMAN-GISHOLT 500 LB. CAP., new EXCELLO MDL. 44, 1/8"Ð1-1/2" LAPPING MACHINE 1981, Type U2, 30" dia. x 38"L. cap., cap., 6" x 1-1/2" x 3" wheel, 3,600 SPEEDFAM SPITFIRE 48", new 1980, 48" O.D. balancing spd. to 300 RPM, (6) drill heads, RPM, 3 HP motor, 8" table traverse, and 13" I.D. lapping plates, (32) segments, (4) (4) outer heads w/10" stroke, (2) inner (2) 3-1/2" x 13" tables, 6-1/2 gal. self- retaining rings, 20" O.D. and 17" I.D. retaining contained coolant tank, pwr. table rings, 4" retaining ring thickness, 50 RPM lapping heads w/10" stroke, digital control and traverse. plate spd., 7.5 HP motor, 36" work height, water auto. indexing, (5) power drill heads w/pwr. BROWN & SHARPE MDL. 13, 8" sw. cooled table, chiller, S/N 8-808-48-PNLC-1868. stroke, S/N 898-092. btn. centers, 22" table travel, (4) grinding wheels, spds.: 125Ð540 RPM, (6) fds.: 7-3/4Ð100 IPM.

DRILL POINT GRINDER WINSLOMATIC MDL. HR, new 1985, 1/16" x 1-1/2" cap., 1 HP spdl. motor, 1/3 HP workhead motor, 3,450 RPMÐ1/4 HP coolant motor, 12" x 2" x 4" x 5" grinding wheels, handles all types L.H. and R.H. 2-flute drills, 90Ð140 deg. drill angles, built-in dresser, splitter, drill holders, S/N 947-00113-85. SUNNEN MDL. MBB 1650K SPEEDFAM SPITFIRE 48" LAPPING MACHINE HORIZONTAL HONE 11 LIEBHERR MDL. L901 GEAR HOBBER LIEBHERR MDL. 401 GEAR HOBBER

GEAR HOBBERS LIEBHERR MDL. L1200, 2.1 dp. pitch, 42" dia. work table, 21" hob slide travel, 47" max. O.D. workpiece, hob spdl. spds.: 30Ð175 RPM, 29.5 HP motor, 9.6" dia. x 9.8"L. hob, chip conveyor, diagonal , universal hob head for radial, S/N 1514/2. LIEBHERR MDL. L901, 35" dia. work table, 2.25 dp. pitch, 14.5" hob slide travel, 28" dia. work table, 6.25" table bore, hob spds.: 40Ð240 RPM, 15 HP motor, crowning, chip conveyor, dbl. cut cycle, pwr. drawbar, tailstock, coolant tank, McCord lube system, tangential feed, S/N 913/2. (2) LIEBHERR MDL. L-650, 25'-5" max. work dia., 25.5' work dia., 2.54 dp. pitch, 14.5" hob slide travel, 22" dia. work table, 5.5" table bore hob spds.: 30Ð240 RPM, 16 HP motor, column and rear suppt., 2-cut cycle, chip conveyor, hob shift, 2" arbor, McCord lube system, coolant enclosure, pwr. tailstock, coolant system, S/N 6662/27 and S/N 662/3. LIEBHERR MDL. 401, 15.75" work dia., 3 dp. pitch, 1.18" min. to 11.8" LIEBHERR MDL. L1200 GEAR HOBBER max. hob slide travel, 7.25" dia. x 6.75"L. hob, 15.9" master worm wheel pitch dia., 15.75" work table, 3.937" table bore, hob spds.: 40Ð480 RPM, > FELLOWS MDL. 36-6 11.4 HP motor, auto. shift hob head, 2" hob arbor, pwr. drawbar, pwr. GEAR tailstock, chip conveyor, 2-cut cycle, auto. lube system, S/N 0424/14. (2) CLEVELAND MDL. 1883, 8" work dia., 4 dp. pitch, 16" max. length, 5" dia. work table, 1.5" table bore, hob spds.: 75Ð650 RPM, 5 HP motor, pwr. tailstock, auto. cycle, hob shift, Allen Bradley electrics, 2-cut cycle, coolant system, S/N 3653-75-8428, S/N 3171-64-7908. GEAR SHAPERS FELLOWS MDL. 36-6, 36" external max. pitch dia., 6" internal max. pitch dia., 6" max. face width, 40" dia. swing, 45 deg. max. helix angle, (12) spds.: 18Ð300 SPM, 7-1/2 HP motor, 34" T-slotted table, 4" spdl., rapid rotation, S/N 28924.

< LIEBHERR MDL. L-650 GEAR HOBBER

> GLEASON MDL. 645 HYPOID GEAR GENERATOR

12 CNC LVD 330 TON CAPACITY CNC HYDRAULIC PRESSBRAKE DREIS & KRUMP 200 TON CAPACITY HYDRAULIC PRESSBRAKE

HYPOID GEAR CNC PLASMA PUNCH GENERATORS WHITNEY 40 T. CAP., Mdl. 661-84, Allen Bradley 8200 CNC control, 4" max. dia., 3/4" max. material thickness, 700 IPM max. pos. spd., 90" X-axis travel, 84" Y-axis (2) GLEASON MDL. 645, new 1980, 10:1 travel, 15 tool auto. punch changer, 1/2" drill head, (3) roller type tables, misc. extreme ratio, -8 to 90 deg. root angle range, punch tooling, S/N 82800037676. 10.50" max. radial setting, 1.5 DP coarsest pitch, 1.25" full depth, 4.60" face width, 6" hole CNC HYDRAULIC PRESSBRAKE taper dia., 5" hole through spindle, 23.5" max. LVD 330 T. CAP., Mdl. 330-BH-13N, Microprocessor MNC-8000 control, 12' x 9" overall, 124" dist. btn. housings, 11.81" throat depth, auto. backgauge, S/N 12257. mach. center to nose of spdl., 15 HP motor, sliding base set-in mechanism, dbl. roll HYDRAULIC PRESSBRAKES arrangement, helical motion mechanism, NIAGARA 300 T. CAP., Mdl. HD-300-12-14, 14'-8"L. x 7-1/2'W. bed, 12'-11" dist. 2-spd. cutter motor, S/N 758704 and S/N 754305. btn. housings, 12" stroke, 10" throat depth, 20" max. height opening, Autogauge 2-axis 1000 CNC backgauge, Hydro Touch, Inch or Single stroke, 4 pos. sequence INTERNAL VERTICAL selector, palm button controls, S/N 50238. DREIS & KRUMP 200 T. CAP., 14'-6" x 5-1/2" bed, 12'-6" dist. btn. housings, 12" PULL DOWN BROACH stroke, 5" shut ht., 13" max. ht. opening, 30 HP motor, worklights, left and right tilt, LaPOINT MDL. 40T, 2-station, 19" x 47" table, 36" backgauge, foot pedal control, S/N H-I423. 68" stroke, 20 FPM, 40 HP motor, 12" throat depth, hyd. pump, push button control, pressure MECHANICAL PRESSBRAKES gauge, hardened and ground steel ways, CINCINNATI MDL. 12, 10' x 200 T. cap., 8' between housings, S/N 39549. motorized coolant pump, auto. force feed CINCINNATI MDL. 13-8, 10' x 250 T. cap., 8' x 10" between housings, 4" stroke, lubrication system, S/N 51050. S/N 36176. AUCTION TUESDAY, DECEMBER 2 10:00 A.M.

CNC CNC NIAGARA 300 TON CAPACITY CNC HYDRAULIC PRESSBRAKE WHITNEY 40 TON CAPACITY CNC PLASMA PUNCH 13 < < VIEW OF VIEW OF CLEARING CLEARING 400 TON CAPACITY 400 TON STRAIGHT SIDE CAPACITY SINGLE CRANK FRAME PRESS PRESS

> DAKE 250 TON CAPACITY VERTICAL FRAME HYDRAULIC PRESS

GAP FRAME PRESS PIN PRESS VERTICAL BANDSAWS CLEARING 400 T. CAP., new 1980, 8" stroke, PARRISH MARTIN 120 T. CAP., 12" stroke, 50-1/2" GROB MDL. 236U, 37" x 37" table, 36" throat, 18" shut ht., 6" stroke adj., 60" x 36" x 7" thk. x 53-1/2" bed, 49" pos. index turntable, 10" travel, 1" blade, 15,000 FPM, 10 HP motor, table tilt, bed, 20" throat depth, 48" x 27" bed, Trabon lube 31" ram table, 5" dia. ram, 40 HP motor, S/N na. pwr. table feed, welder, worklights, variable system, clearing pwr. adj. knockout mechanism, band spd., variable band tension, S/N 238. pneu. die cushions, S/N SI-1446. DOUBLE END DECOILER TANNENITZ GHE 30", new 1990, 36" x 37" STRAIGHT SIDE SINGLE PERFECTO 1,200 LB. CAP., 8"W. x 48" dia. coil, 6" table, 10 HP motor, 20' blade, 45 deg. tilt, 39" lateral adj., 3-arm centering , hand crank to throat, worklight, rip fence, S/N 90019. CRANK PRESS center mandrel, spdl. mtd. sealed bearings, adj. DoALL 18" X 18", Mdl.TF-18A, 18" x 32" table, CLEARING 400 T. CAP., new 1980, Mdl. 60-48, springbrake to control over run, welded cabinet type 18" x 18" cap., 24" repeat stroke, 1" x 15' band 32 continuous SPM, 12" ram stroke, 18" stroke base, quick adjust clamp arms, S/N DR3229-6. length, (11) band spds.: 50Ð300 RPM, 5 HP hyd. adj., 60" x 48" bed opening LR x H, 1,200 RPM, motor, vise, coolant system, S/N 322-74119. 100 HP motor, T-slotted bolster, 200 T. cushion, DECOILERS IMCA rated cap. meter, cushion, IMCA rated cap. POSITIONERS meter, cushion timer, die clamp lift, variable spd. PERFECTO 1,200 LB. CAP., 12" x 48" coil, 31" floor ARONSON 20,000 LB. CAP., new 1993, Mdl. selection, Trabon lube system, S/N 064-4167. to mandrel center, 6" adj. lateral base, manual mandrel expansion, adj. spring drag brakes, HTS20GE, 36" dia. table, 72" max. center ht. STRAIGHTENING PRESS S/N PR3563-4. table to floor, pendant control, variable spd. motor, geared elevation, S/N 9338. WILLIAMS & WHITE 150 T. CAP., 8' x 4' table, DURANT DECOILER, S/N MJ401. S/N C-3694. RANSON 2,500 LB. CAP., Mdl. 25P, tilt and rotate, STRAIGHTENERS 36" sq., S/N 169669. HYDRAULIC PRESSES EGAN 2,000 LB. CAP., 10"W., 40" O.D. caps., BEATTY 100 T. CAP., 53" x 96" bed, 8" shut height, WELDING TAIL STOCK spds.: 12Ð72 FPM, 1 HP motor, S/N 3294. 22" stroke, 9 1/4" ram dia., 30" throat, S/N 14870. ARONSON MDL. TS10, S/N 81209. DAKE 50 T. CAP., 14" stroke, 10" shut ht., 4" ROWE 2,000 LB. CAP., (7) straight rolls, (4) pinch ram, 36" ht. bed to floor, 22" x 15" bed, 8" throat, rolls, 2-1/2" roll dia., 40" max. coil dia., elec. controls, HOVER PALLET 1,800 RPM, 10 HP motor, lights, full enclosure. entry/exit rolls, S/N 14525. TRANSPORTERS HANNIFIN 25 T. CAP., Mdl. S-25-36, S/N T-17774. ROWE 2,000 LB. CAP., (7) straight rolls, (4) pinch (18) AS NEW AS 1998, 30,000 lb. transporter, rolls, 4 roll, infinite variable fds.: 25Ð75 FPM, elec. double pneumatic drives, hand held pendant MULTI-PRESS controls, S/N 6218. control unit. HYDRAULIC PRESS DENNISON 5 T. CAP., 6" stroke, 16" x 11" bed, > 2" ram, 6" throat, dual hand controls, S/N 709. HOVER PALLET PROXY BIDS TRANSPORTER If you cannot attend this sale we VERTICAL H-FRAME will bid on your behalf. Contact HYDRAULIC PRESS Houston office at (713) 691-4401 DAKE 250 T. CAP., 12" stroke, 36" dia. bed, for instructions, or go to 4-1/2" x 36" dia. upper and lower plates, our website at: S/N 13842. www.pmi-auction.com.

< DAKE 50 TON CAPACITY HYDRAULIC PRESS

> ARONSON 20,000 LB. CAPACITY WELDING POSITIONER DOALL 18" X 18" VERTICAL BANDSAW 14 STARRETT MDL. RGDC 6440-24 DCC BENDIX PORTAGE MDL. 72A LAYOUT MACHINE PROCELO TYPHOON MDL. 48-36-E 1000 COORDINATE MEASURING MACHINE HEAVY DUTY ROTARY WASHER

COORDINATE PORTABLE GRANITE SURFACE PLATES MEASURING MACHINE BENCH CENTERS (2) 5' X 7' X 15" GRANITE INSPECTION PLATES ON STANDS. STARRETT MDL. RGDC 6440-24-DCC, SOUTH BEND 16" X 72", steel leg stand, new 1994, 40" X-axis travel, 64' Y-axis travel, centers at 42" work ht. 3' x 4' X 6" BLACK GRANITE INSPECTION PLATE ON STAND. 24" Z-axis travel. 90" x 48" black granite SUNDSTRAND 12" X 36", 1,500 lb. cap., 4' x table, 2,500 lb. table load cap., Sams Level V 2' x 4' ht. steel leg table, centers at 44" work ht. 3' x 3' X 6" RAHN GRANITE INSPECTION PLATE software, Renishaw MIH Touch/Teach ON STAND. probe, 3 pt. air leveling, Starrett joystick pendant, probe extensions, Arrow air dryer, BENCH CENTERS 4' x 6' X 12" BLACK GRANITE INSPECTION PLATE ON STAND. CSS laboratories tower CPU, S/N SD5014. BROWN & SHARPE 24" X 36". SUNDSTRAND 9" X 36". LAYOUT MACHINES MISCELLANEOUS SHOP BENDIX PORTAGE MDL. 84A, 114" vert. ELECTRIC & WAREHOUSE EQUIPMENT cap., 6' hz. arm, S/N 77566. (300) VIDMAR CABINETS; TOOLING; GEAR HOBS; BOX FURNACE SHAPERS; DOUBLE END GRINDERS; ASSORTMENT OF BENDIX PORTAGE MDL. 72A, 48" arm, 72" PACIFIC SCIENTIFIC MDL. PNR-243618-A- GRANITE SURFACE PLATES AND TABLES. vert., (4) 50" x 70" plates, 3-axis D.R.O, S/N 18, dims: 24"W. x 18" ht. x 36" dp., 2,050 674327. deg. F.max. temp, 40 KW, Cabridge carbon COMPUTER EQUIPMENT index reader, S/N P2682. DESKPRO MDL. EN550 PERSONAL COMPUTER; (2) LAYOUT PLATES DESKPRO MDL. EN4000 PERSONAL COMPUTERS; (2) (42) PORTAGE, 50" x 70". HEAVY DUTY DESKPRO MDL. EN400 PERSONAL COMPUTERS; ROTARY WASHER DESKPRO MDL. EN450 PERSONAL COMPUTER; (4) TOOL PRESETTER COMPAQ PROLIANT SERVERS; COMPAQ PROLIANT PROCELO TYPHOON MDL. 48-36-E- ERICKSON KENNAMETAL, 8-3/4" throat, 6500 SERVER; (12) HEWLETT-PACKARD 19" RGM 1000, new 1990, 48", 48 KW heat element, COLOR MONITORS. 21"L., Acu-RIte II - 4 D.R.O. (4) top nozzles, (12) right side nozzles, 437 U.S. gal. tank cap., S/N 90-204. COMPARATOR MITUTOYO 10", Mdl. PH250B, 6" x 6" PORTABLE WASHER table, 4-1/2" throat, 7" ht., adj., KARCHER, 150 PSI variable pressure, brightness, 10x and 20x lens, 4" adj. table 50Ð185 deg. F. max. temp., elec. heat ele- height, viewing shield, table mtd. ment, chemical adding tank, S/N 13526. , S/N 172-107. TABLE TOP PALLET WRAPPER LAN-WRAPPER 4,000 LB. CAP., V Series, HARDNESS TESTER Type SV56 spiral, 80" vert. cap., low profile WILSON ROCKWELL MDL. 3-JR, 8" ht., auto. heat sensor, adj. stretch force counter, 5-1/2" hz. reach, 8" testing dia., S/N 2438. JOG, S/N SW15263. VIEW OF GRANITE SURFACE PLATES

LAN-WRAPPER 4,000 LB. MITYUTOYO 10" COMPARATOR PORTAGE LAYOUT PLATES CAPACITY PALLET WRAPPER 15 PLANT & MACHINERY INC. Presorted AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE PUBLIC INVITED First Class Mail P.O. Box 19100 U.S. Postage Houston,TX 77224-9100 TUESDAY, DECEMBER 2 • 10:00 A.M. PAID Eugene, Oregon Permit No. 305 DATED MATERIAL – PLEASE DELIVER

HUGE QUANTITY OF SURPLUS MACHINERY FROM CATERPILLAR INC. & CATERPILLAR SUPPLIERS CONSOLIDATED INTO ONE LOCATION FOR EASE OF SALE FEATURING: CNC Floor & Table Type Horizontal Boring Mills, Floor & Table Type Horizontal Boring Mills, CNC Vertical Boring Mills, High Column Vertical Boring Mill, Rotary Tables, CNC Horizontal & Vertical Machining Centers, CNC Jig Mill, Jig Mill, CNC Hollow Spindle Lathe, CNC Lathe, CNC Twin Spindle Chucker, CNC Chuckers, Single Spindle Automatic Chuckers, Multi-Spindle Automatic Chucker, Single Spindle Automatic Bar Machines, Automatic Screw Machine, Engine Lathes, Turret Lathes, Jig Borers, Boring Machines, Mills, Grinders, Drills, Hones, Lapping Machine, Centerless Lapper, Bolt Threader, Balancer, Gear Hobbers, Gear Shapers, Pressbrakes, Presses, Bandsaws, Straighteners, C.M.M., Much Much More! AUCTION PEORIA, ILLINOIS

PROXY BIDS LEASE FINANCING AVAILABLE If you cannot attend this sale we will bid on your behalf. Maximize your bidding power! Get pre-approved for up to ARE YOU SELLING Contact Houston office at (713) 691-4401 for instructions, $75,000 in lease financing. YOUR PLANT? or go to our website at: www.pmi-auction.com. For more information call The AuctionLea$e Department at (800) 438-1470. To Apply Online go to: CALL LODGING www.AuctionLease.com Holiday Inn I-74...... (309) 686-8000 1-800-282-8466 4400 North Brandywine Drive, Peoria, Illinois DIRECTIONS FOR A Comfort Suites ...... (309) 688-3800 FROM THE I-474 BYPASS AROUND PEORIA: Take Exit 3A which is CONFIDENTIAL 1812 West War Memorial Drive, Peoria, Illinois the same for either direction. At the end of the exit, turn left (south) Spring Hill...... (309) 681-2700 at the stop sign. This is Maxwell Road. Go approximately 1 mile down CONSULTATION 2701 West Lake Avenue, Peoria, Illinois and the auction site will be on your right. Watch for auction signs.

TERMS & CONDITIONS A 10% Buyer’s Premium will apply. THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER Everything will be sold to the highest bidder or bidders for cash in accordance with AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY the auctioneer’s Customary Terms of Sale, copies of which will be posted on OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN the premises. RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER ANY PURPOSE WHATSOEVER. OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO The buyer does hereby assume and does agree to indemnify and hold the auctioneer PLANT & MACHINERY, INC. harmless from any future claim which shall pertain to the fitness or use of that Here is an example of what your letter should be: Mr. “Customer Name” is a customer asset as being purchased. Riggers, movers, electricians and buyers performing of this bank. This bank will guarantee unqualified payment to PMI on the account work at the Auction Site must provide PMI with evidence of insurance. The insurance listed herein up to the amount of $______. This letter is good until January 2, 2004. coverage must be at a level acceptable to PMI and to the seller. PMI reserves the In default of payment of bills in full within the time therein specified, the Auctioneer right to withdraw items, alter the order of the sale, accept bids from the seller, and in addition to all other remedies allowed by law, may retain all monies received as group lots as it may deem appropriate. deposit or otherwise, as liquidated damages. All items must be removed by the time Although all information has been obtained from sources deemed reliable, the announced at the start of the sale. auctioneer and seller make no warranty or guarantee, expressed or implied, as to the Lots not paid for and/or removed within the time allowed may be resold at public accuracy of the information herein contained, or contained in our catalog. It is for or private sale without further notice, and any deficiency, together with all expenses this reason that buyers should avail themselves of the opportunity to make inspection and charge of resale, will be charged to the defaulting purchaser. prior to the auction. Although it is not likely, auction sales are subject to cancellation The buyer acknowledges that he or an agent has inspected all of the assets upon or postponement. Kindly contact auctioneer prior to attendance. which he will be bidding and/or does purchase. These terms and conditions may be modified or supplemented by language in the Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH catalog available at the sale site or by announcement at the start of the sale. Bidders REMOVAL AT BUYER’S RISK AND EXPENSE.” should be attentive to those announcements and to the catalog language.

IP-3149169