DOCSLIB.ORG

Stocklist.Pdf

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Stocklist.Pdf KUNARK HITECH MACHINING & SALES PVT LTD. J K Gears & Machinery Stock Machine Link Actuators Pinions Manufacturing 1276 JKGEARS - PINIONS As Per Your Drawings OR Samples - PINIONS & GEARS - Details MANUFACTURER OF CMM & LEAD PROFILE PROVEN GEAR PRODUCTS.Manufacturing on all modern CNC Gear Cutting Machines.The Internal Gear Cutting is Done on Gear Shaper.Our Pinions Provide ZERO backlash and positive pinion engagement . Our Pinions Can be Supplied with Zinc Flake Chemistry from Overseas.We provide a complete solution to you for directly assembly . Borers All Types 528 Stanko - 2620B (90mm) - Table Type Borer - Clean and good Machine , slides likes new x Ready Details to use machine x Heavy Duty Machine x 1250mm x 1120mm (spindle 90mm).... heavy duty machine 557 union wmw - bft 90/5 - Table Type Borer with facechuck - X:- 1600mm x Y:- Details 1200mm...Facechuck...Rotary Table..Excellent machine.. 572 Defum (Under Licence From Skoda) - CWC 80 - 80mm Horizontal Borer Complete With Tail Details Stock , Rotary Table & Heavy Duty Face Chuck - 1500 x 1100 543 Defum (Under Licence From Skoda) - CWC 80 - 80mm horizontal borer complete with tail stock , Details rotary table & heavy duty face chuck - 80mm horizontal borer complete with tail stock, rotary table & heavy duty face chuck 406 Defum - HWCP 110 - Floor Type Borer - Y:-2200mmThe machine 1 Rotary Table.The Face Details Chuck Has Diameter of 800mm. 126 defum - hwcs-110. - Wide bed horizontal table type borer (chuck & tailstock - Wide bed horizontal Details borer.Heavy Duty Borer. 550 TOS - WH 63 - Table Type Borer with tailstock and facechuck - 1200mm x 800Excellent Details ConditionMachine complete with tailstock, facecbackmachines pulled out from running workshop germany 562 Tos - WH 80 - Horizontal Table Type Borer Machine With Face Chuck & Tailstock - Table size: Details 1100 x 1100 mm, X: 1250 mm;Y: 1000 mm;Z: 710 mmMachine WithTailstockFacechuckRotary Table Broach Grinder / Broach Sharpner 1332 KLINK - 460 - Broach Sharpening Machine Details Broaching machines 1343 KARL KLINK - 80T - Vertical Broaching Machine Details 1083 Cardinal Weatherley - TM7 - Vertical Broaching Machine Details CNC GEAR TOOTH CHAMFERING M/C 1007 Hurth CNC - ZK 10 CNC - cnc gear tooth chamfering machine without Indexing Plates With Details Telescopic Covers and Safety Guards - Siemens 828D CNC Control.No Need Of Indexing Plates.Machine with Twin Spindle Adjustable Head.Re-manufactured in 2016. CNC Lathes 1099 Heid - 1650 x 3000mm - CNC Lathe Machine Heavy Duty With Boreing Facility - Swing is Details 1650mm ....Between Centre 3000mm ...Heavy Duty CNC Lathe... 1110 Colchester - 3000 - CNC Lathe Details 1137 Hyundai - QT18N - CNC Lathe (Choice Of Three Similar Machines) Details 1109 Tornado - Tornado 300 - CNC Lathe Details CNC MILLING ELGAMILL TYPE 1165 Butler - HNC 29/5 - BUTLER CNC Bed Mill ELGAMILL - Heavy Duty Working Elgamill.Working Details videos available . CNC Robot 1145 Kawasaki - UX 120 - Used CNC Robot (6 Axis) Details 1146 Kawasaki - UX 120 - Used CNC Robot (6 Axis) Details CNC tapp, thread and worm grinders. 920 Matrix - 37 (cnc SIX Axis) - CNC Thread Grinder Machine - CNC THREAD AND WORM Details GRINDER.EXCELLENT CONDITION LIKE NEW. 1241 Matrix - 39 (cnc FIVE Axis) - CNC Thread Grinder Machine - CNC THREAD AND WORM Details GRINDER. EXCELLENT CONDITION LIKE NEW. 1008 Matrix - 6900 CNC - CNC Internal Thread Grinder - CNC INTERNAL THREAD GRINDER FOR Details SALE Coniflex Straight Bevel Generator 1200 Gleason - 104 - Coniflex Straight Bevel Generator - Excellent Machine Under Power. Details Crankshaft Grinder CNC Page: 1 [http://www.jkgears.com] 631 Zanrosso - Akabline S 91 - CNC Travelling Wheelhead Crankshaft Grinder - Cnc Control Details Marposs Sizing Coolant & Filtration Machine Like NewLots of Books Cylindrical Grinder / Bore Grinders 1073 Churchill - OX - Cylindrical Grinder Machine Details Deephole Borers & Drilling 1168 SIG - B16 (choice of two similar machines) - Deep Hole Borer - Choice of two machinesSIG Details B16/1 Deep Hole Drilling Machine? Bed Length - 2M? Max. Drilling Length - 1M? Max. Drilling Diameter - 30mm 446 Mollart - deep - Deep Hole Borer Details 468 Mollart - Series 5000 - Single Spindle Tool Rotating Deep Hole Drilling - Excellent Details MachinesChoice of two machinesGood Selection of Guide Bushes Drills etc. Drill & Tap Centre CNC 134 sugino - cv-6 - drill and tap center cnc - X : 300mm, Y: 250 mm , Z : 250 mm, Details 894 Brother - TC 323 - CNC Dual Pallet Drill & Tap Center - Excellent conditionManuals Details avilableDouble pallet CNC Drill Tapp Center Drill Machines All Types 584 Stanko Import - 2A576 - Heavy Duty Radial Drill With 3000 Arm - Heavy Duty Radial DrillArm Details 3000mmDrill Capacity upto 100mmHydraulic clamping systemWith drilling, tapping, boring function 315 poreba - 40mm (choice of five similar machines) - radial drills Details Duplex Grinders Double Sided. 723 Gardner - 2 H-30 - Duplex Grinder Machine Details EUROPE MACHINES 1318 Hurth Details 1317 NILL + RITZ Details 1319 Gleason HURTH Details 1320 Liebherr Details 1321 Liebherr - LC 122 Details 1322 PFAUTER - P 210 Details Facing and Centering Machines (FNC) 1035 Giddings and Lewis-Fraser - Endomatic - Centring & Facing Machine Details Fine blanking press 322 feintools - gkp-f 25/40 - fine blanking press Details Gear Chamfering Machine 1293 Brother - Gear Chamfering Machine (CHOICE OF FIVE MACHINES) Details 813 Giddings and lewis - 46 - gear chamfering machine automatic - Machine like new Details 1202 Samputensili - SU SCT 3 - Gear chamfering and deburring machines - Gear Tooth Chamfering Details Machine - SAMPUTENSILI SCT3, Like New. 1205 Samputensili - SU SCT 3 - Gear chamfering and deburring machines - Gear Tooth Chamfering Details Machine - SAMPUTENSILI SCT3, Like New. Gear Grinders 825 FK 250-4 - Csepal - Gear Grinder Machine Details Gear Hob Relieving Lathes 807 WMW - 250/4 With Grinding Attachment - Hob Relieving Lathe Heavily Equipped - 1995 Machine Details , Brand New Condition.Very Very Heavily Equipped.Copying & Grinding Attachment Available 826 WMW - dh 250 / 5 - Hob Releving lathe (Number 5) - This Model is 250/5.very Young Model Details 828 wmw - dh250/3... - hob relieving lathe with grinding attchment Details 1038 Reinecker - UHDA10 - Hob Relieving Lathes Details Gear Hob Sharpeners 1097 kapp - as 203 - gear hob sharpner / grinder - With 06 Indexing Plates Original Kapp Details 1267 kapp - AST 203 - Gear Hob Sharpening Machine - KAPP AST-203 Gear Hob Sharpner Machine Details complete with 13 Index Plates 8, 10, 11, 12, 15, 16, 17, 18, 18, 20, 22, 24, 30 Gear Hobbers 1192 Record - Gear Hobbing Machine Details 882 David Brown - 10 - Horizontal Heavy Duty Gear Hobber Machine Details 802 Mikron - 102.05 - Universal Gear Hobber for smaller gears - Excellent MachineFull set of change Details gears Page: 2 [http://www.jkgears.com] 981 KOEPFER - 140 - Gear Hobber Machine Details 842 MITSUBISHI - 250 - Universal Gear Hobber Heavy Duty High speed - very high speed gear Details hobber 1279 Liebherr - 402 - Heavy Production Gear Hobber Details 819 lees bradner - 7 hd (choice of new machines) - rigid gear hobber (choice of two machines) Details 930 Lorenz - E 16 - 1600mm Universal Gear Hobber With Tailstock, Hobbing + Tangential Heads - Details Machine with full change gears + TailstockTwo Heads ie Hobbing + Tangential HeadMachine like New 1193 Tos - FO 16 - gear hobber universal - Excellent Machine.Full Set Of Change Gears.Machine Details came out From Germany Workshop . 1189 SYKES - H160.4 (CNC 3 AXIS) - Three AXIS CNC HORIZONTAL GEAR HOBBER - State of the Details Art Drive TechnologyBase Machine with Siemens 828AdvanceDigital CNC control incorporating electronic gear box thus eliminating use of change gears.CNC control Machine: - 3 axis (X, Z, C)Automatic Hob Shifting Multicut Cycle, CrowningHydraulic ClampingMotorised Central LubricationRexroth Hydraulics , Magnetic Swarf Conveyor Full enclosed safety guards 1071 Mikron - M 132.02 - Gear Hobber Machine Details 1139 TOS - OFA 16 A - Gear Hobbing Machine Details 1340 Pfauter - P160 - Gear Hobber Machine Details 1019 Pfauter - P160HI - Horizontal Heavy Duty Gear Hobber - Excellent MachineLike NewFull Details Guardings and Enclosures 1283 PFAUTER - PA210 - Gear Hobber Machine Details 1346 Pfauter - PA320 - Gear Hobber Machine Details 858 Churchill - PH 3615 - Heavy Duty Gear Hobbing Machine - Excellent Heavy Duty Gear Hobber Details with Differential, Tnagential feed 1000mm x 8module Machine puller from UK factory Intermittent hob shift 871 Poreba - zfa 75 universal - universal gear hobber pure mechanical - Mechanical Gear Details HobberCopy of Tos Fo6 Gear HobberAll Machines Under Power For Demo 874 WMW - zfwz 800 x 10 - Gear Hobber Machine Details 875 WMW - ZFWZ 800 X 10 / II MODUL - Universal Gear Hobber Heavy Duty (Rebuilt 2001) - Details Rebuilt Machine in 2001, Machine New Like.Machine Under Power For Demo.Very Very Little Used MachineHeavy Duty Gear Hobber.Full Change Gears Available. Gear Hobbers CNC 903 SYKES - H160.4 (CNC 3 AXIS) - Three AXIS CNC HORIZONTAL GEAR HOBBER - State of the Details Art Drive TechnologyBase Machine with Siemens 828AdvanceDigital CNC control incorporating electronic gear box thus eliminating use of change gears.CNC control Machine: - 3 axis (X, Z, C)Automatic Hob Shifting Multicut Cycle, CrowningHydraulic ClampingMotorised Central LubricationRexroth Hydraulics , Magnetic Swarf Conveyor Full enclosed safety guards 1158 Kashifuji - KB 200 - CNC GEAR HOBBER MACHINE - CNC HEAVY DUTY GEAR Details
Load more

Recommended publications
  • Gear Cutting and Grinding Machines and Precision Cutting Tools Developed for Gear Manufacturing for Automobile Transmissions
    Gear Cutting and Grinding Machines and Precision Cutting Tools Developed for Gear Manufacturing for Automobile Transmissions MASAKAZU NABEKURA*1 MICHIAKI HASHITANI*1 YUKIHISA NISHIMURA*1 MASAKATSU FUJITA*1 YOSHIKOTO YANASE*1 MASANOBU MISAKI*1 It is a never-ending theme for motorcycle and automobile manufacturers, for whom the Machine Tool Division of Mitsubishi Heavy Industries, Ltd. (MHI) manufactures and delivers gear cutting machines, gear grinding machines and precision cutting tools, to strive for high precision, low cost transmission gears. This paper reports the recent trends in the automobile industry while describing how MHI has been dealing with their needs as a manufacturer of the machines and cutting tools for gear production. process before heat treatment. A gear shaping machine, 1. Gear production process however, processes workpieces such as stepped gears and Figure 1 shows a cut-away example of an automobile internal gears that a gear hobbing machine is unable to transmission. Figure 2 is a schematic of the conven- process. Since they employ a generating process by a tional, general production processes for transmission specific number of cutting edges, several tens of microns gears. The diagram does not show processes such as of tool marks remain on the gear flanks, which in turn machining keyways and oil holes and press-fitting bushes causes vibration and noise. To cope with this issue, a that are not directly relevant to gear processing. Nor- gear shaving process improves the gear flank roughness mally, a gear hobbing machine is responsible for the and finishes the gear tooth profile to a precision of mi- crons while anticipating how the heat treatment will strain the tooth profile and tooth trace.
    [Show full text]
  • Mackinaw Underwriters, Inc. MANUFACTURING SUPPLEMENT
    Mackinaw Underwriters, Inc. MANUFACTURING SUPPLEMENT Insured’s Name: Click or tap here to enter text. Supplement Completed By: Click or tap here to enter text. Date: Enter Date. Question Yes No 1. What product is being manufactured? Click or tap here to enter text. 2. Is the manufactured product a component? ☐ ☐ a. If yes, please describe: Click or tap here to enter text. 3. What type of raw materials are used? Check all that apply. Plastics ☐ Aluminum ☐ Titanium ☐ Zinc ☐ Cadmium ☐ Brass ☐ Lead ☐ Nickel ☐ Magnesium ☐ Tin ☐ Copper ☐ Chromium ☐ Wood ☐ Other ☐ Click here to enter text. a. If wood is selected, is there a dust collection system present? ☐ ☐ 4. What type of machinery is used? Check all that apply. CNC ☐ Planing ☐ Milling ☐ Boring ☐ Stamping ☐ Drilling ☐ Power Press ☐ Grinders ☐ Cutters ☐ Saws ☐ Welding ☐ Sandblasting ☐ Die ☐ Press Brake ☐ Jig Borer ☐ Casting Lathes ☐ Punch Press ☐ Other ☐ Click or tap here to enter text. 5. Who is responsible for maintaining Click or tap here to enter text. machinery and how often is it inspected? 6. Is Personal Protective Equipment (PPE) provided and worn? ☐ ☐ a. If yes, what is provided? Click or tap here to enter text. 7. Are accessible moving parts guarded on machinery/equipment? ☐ ☐ 8. Does the insured have a Lock Out Tag Out (LOTO) program? ☐ ☐ 9. Does the insured use forklifts? ☐ ☐ a. If yes, is there training in place? ☐ ☐ b. Is there a forklift safety program in place? ☐ ☐ c. Are inspections held daily for all forklifts? ☐ ☐ 10. What is the maximum weight lifted by hand? (in lbs.) Value 11. Does the insured deliver or pick up goods? ☐ ☐ a.
    [Show full text]
  • Status: Active Date Printed: 8/11/2004 SAN DIEGO COMMUNITY
    SAN DIEGO COMMUNITY COLLEGE DISTRICT CITY COLLEGE ASSOCIATE DEGREE COURSE OUTLINE SECTION I SUBJECT AREA AND COURSE NUMBER: Machine Technology 140 COURSE TITLE: Machine Technology UNITS: 4.00 Grade O nly CATALOG COURSE DESCRIPTION: This course is an introduction to the M achine Technology field. Emphasis is placed o n safety, measurements, common formulas, machining applications, drawings, and career opportunities in the field. This course is designed for students planning to major in the occupational field of machine technology. REQUISITES: Advisory: ENGL 051 and ENGL 056, each with a grade of "C" or better, or equivalent, or W5/R5. Advisory: Completion of or concurrent enrollment in MATH 095 with a grade of "C" or better, or equivalent, or M40. FIELD TR IP REQUIREMENTS: May be required TRANSFER APPLICABILITY: Associate Degree Credit & transfer to CSU and/or private colleges and universities. CAN DATA: None LECTURE HOURS PER WEEK: 3.00 LAB HOURS PER WEEK: 3.00 STUDENT LEARNING OUTCOMES: Upon successful completion of the course the student will be able to: 1. Describe the history of machines and identify machine trade careers, professions and trade organizations. 2. Identify safety equipment and explain safe work practices in the machine shop. 3. Illustrate an understanding of the lines and symbols on engineering drawings and plan the sequence of operations for machining round work and flat workpieces. 4. Use a variety of measuring instruments such as squares, surface plates, vernier calipers, micrometers, gages, comparators, to measure given workpieces. 5. Prepare a work surface for layout, use the combination square and surface gage to layout straight lines, and make precision layo uts using the sine bar and gage blocks.
    [Show full text]
  • Manufacturing Glossary
    MANUFACTURING GLOSSARY Aging – A change in the properties of certain metals and alloys that occurs at ambient or moderately elevated temperatures after a hot-working operation or a heat-treatment (quench aging in ferrous alloys, natural or artificial aging in ferrous and nonferrous alloys) or after a cold-working operation (strain aging). The change in properties is often, but not always, due to a phase change (precipitation), but never involves a change in chemical composition of the metal or alloy. Abrasive – Garnet, emery, carborundum, aluminum oxide, silicon carbide, diamond, cubic boron nitride, or other material in various grit sizes used for grinding, lapping, polishing, honing, pressure blasting, and other operations. Each abrasive particle acts like a tiny, single-point tool that cuts a small chip; with hundreds of thousands of points doing so, high metal-removal rates are possible while providing a good finish. Abrasive Band – Diamond- or other abrasive-coated endless band fitted to a special band machine for machining hard-to-cut materials. Abrasive Belt – Abrasive-coated belt used for production finishing, deburring, and similar functions.See coated abrasive. Abrasive Cutoff Disc – Blade-like disc with abrasive particles that parts stock in a slicing motion. Abrasive Cutoff Machine, Saw – Machine that uses blade-like discs impregnated with abrasive particles to cut/part stock. See saw, sawing machine. Abrasive Flow Machining – Finishing operation for holes, inaccessible areas, or restricted passages. Done by clamping the part in a fixture, then extruding semisolid abrasive media through the passage. Often, multiple parts are loaded into a single fixture and finished simultaneously. Abrasive Machining – Various grinding, honing, lapping, and polishing operations that utilize abrasive particles to impart new shapes, improve finishes, and part stock by removing metal or other material.See grinding.
    [Show full text]
  • DAM Ústí Nad Labem S
    ABOUT US - DAM Ústí nad Labem s. r. o. » Our company was established on 21st June 1993 with metalworking as its scope of activity. In the years to come, based on supply and demand we expanded our scope of activity to locksmith works and steel-structure manufacture. Today, the company employs 60 employees. » The company operates in two units. The first unit, machining and locksmith shop operates in PZ Tonaso a.s. Neštěmice premises. The second unit is located in TOS Varnsdorf, a.s. premises where we are engaged in welding of steel structures. Here, our employees participate in development of new machines manufactured by TOS Varnsdorf, a.s. and help in innovation of the existing machines – horizontal boring machines. DAM Ústí nad Labem s. r. o. www.dam-ul.cz DIAGRAM OF OUR ORGANIZATION OWNER – managing director, quality manager Finance department manager Welding supervision Welding and production of steel Central – metalworking structures in Varnsdorf Technicians of the company Manager OK Varnsdorf Turning and milling machines operators Welders Designer DAM Ústí nad Labem s. r. o. www.dam-ul.cz CERTIFICATES Certifi cation Certifi cate by Český lodní ČSN EN ISO 9001:2001 IWT qualifi cation EWT qualifi cation EN ISO 3835-2:2006 a průmyslový registr EWT qualifi cation NDT test qualifi cation Authorization of Visual test qualifi cation Weld surface visual test a welding technician qualifi cation DAM Ústí nad Labem s. r. o. www.dam-ul.cz METALWORKING We perform the following activities: lathe work up to the diameter of machining - 1250 mm and length 4000 mm.
    [Show full text]
  • Kunark Hitech Machining & Sales Pvt Ltd
    Kunark Hitech Machining & Sales Pvt Ltd. www.jkgears.com MOBILE:- +91 986 797 3046 (Mr Dalbir Singh ) . Sr Produ Model Make Type Of Machine No. ct No 1 0837 PWF 300 Klingenberg Gear Hob Tester 2 0415 CINCINNATI CINCINNATI Horizontal Milling Machine Type 315-16 EDO Horizontal milling Mach 3 0778 M 350 Pierce All Titan Turret Punch Press 4 0636 VG-450 Carl Zeiss GEAR TESTER 5 0732 Makino MC-65 Makino Horizontal Machining Centre Twin Pallet 6 0423 TPM-12A SMERAL Multistation Nut Former 7 0710 RF 31/B Csepal Radial Drill Heavy Type 8 0804 HDC-225 Poreba Planner 9 0736 No. 50 Jig Matrix Jig Borer Borer 10 0427 Matrix 7904 Matrix Tapp Grinding Machine 11 0428 DAW 80 FRECH Hot Chamber Pressure Diecasting (ZINC) 12 0847 1250 Wmw thread milling & spline hobbing 13 0557 NZA Reishauer Reishauer Gear Grinder (Two Machines) 14 0437 JS 772 JONES & SHIPMAN Precision honing machine 15 0562 H-250-D2 Buhler Pressure Die Casting Machines 16 0659 WF 10 (Choice Hurth Germany Universal Gear Hobber For Heavy of two Production machines) 17 0447 172 HEALD Bore Grinder 18 0606 B 30 / 3 Sig Deep Hole Boreing & Drilling 19 0459 800 X 220,SDS BATTENFELD GERMANY Used Injection Moulding Machine 2000 20 0460 Talyrond2 Talyrond Roundness Checking Machine 21 0797 SASL-125 WMW Centreless grinding machine MIKROSA 22 0798 7125A Fellows Fellows Gear Shaper 23 0815 LS 150. Lorenz Gear Shaper High Speed For Production 24 0816 SI-8-750 Demm 800mm Diameter Gear Shaper 25 0822 10tons x Cardinal Weatherley Vertical Hydraulic Internal 48inch Broaching Machine 26 0823 2A (Tilting Maxicut Gear Shaper With Tilting Table Table ) between 4 and 7 degrees 27 0826 HSF 33B Klingenberg GEAR HOB TOOTH PROFILE GRINDER 28 0789 TC 80 Rouchaud HORIZONTAL SPINDLE SPLINE MILLING MACHINE 29 0469 BUA 31/2000 TOS Universal Cylindrical Grinder 2000mm With internal 30 0733 SP 60 .
    [Show full text]
  • CNC Machining Services
    CNC Machining Services Pryme Group operates a comprehensive range of modern CNC machinery to support most manufacturing activities including mill turning, horizontal milling and 3 though to 13 axis capabilities. Exotic Materials Experts 140+ CNC Machines Many years of experience working with specialist materials, such as; inconel, monel and duplex, as well as grade steel and alloys. 2000mm Diameter/Length 5000mm Sliding Head Specialists Offering one the largest range of Star Sliding Head machines in the UK, Pryme Group can machine parts from 0.3mm to 38mm in diameter and can 50 Years of Experience offer up to 13 axis capabilities. Quality Assurance Our experienced and well-trained staff work in In-House Testing & Quality Control conjunction with modern and proven technical systems to meet unique requirements. Contact Us [email protected] +44 (0)191 413 0000 www.prymegroup.co.uk Newcastle | Morecambe | Dundee +44 (0)191 413 0000 [email protected] www.prymegroup.co.uk Plant List Our Full Capabilties With over 140 CNC machines, Pryme Group has an extensive plant list and we don't have the space to show it here, but for a full and comprehensive inventory please contact +44 (0)191 413 000 or [email protected]. Recent Investment To expand the capabilities we can offer, we're always investing in new machinery. Our most recent wave of CNC machines (shown below) have just been installed, further advancing our milling & turning options. Mazak Integrex e-670H Mazak E1600v Mazak QTC-200MYL (With bar feeder) Mazak VTC 530C Mazak HCN-6000 Hankook VTC125E Mazak QT-200MYL (With bar feeder) Mazak VTC 530C Working with the Pryme Group Pryme Group uses a wealth of experience from itsContact group of companies Us to offer a turnkey service for global contract manufacturing, delivering this by combining high quality engineering design, fabrication, machining, hydraulic, assembly and testing services.
    [Show full text]
  • General Applications of Gears
    UNIT - III GEAR MANUFACTURING PROCESS SPRX1008 – PRODUCTION TECHNOLOGY - II Gears are widely used in various mechanisms and devices to transmit power and motion positively (without slip) between parallel, intersecting (axis) and non-intersecting non parallel shafts, •without change in the direction of rotation •with change in the direction of rotation •without change of speed (of rotation) •with change in speed at any desired ratio Often some gearing system (rack – and – pinion) is also used to transform Rotary motion into linear motion and vice-versa. Fig.1 Features of Spur Gear Gears are basically wheels having, on its periphery, equispaced teeth which are so designed that those wheels transmit, without slip, rotary motion smoothly and uniformly with minimum friction and wear at the mating tooth – profiles. To achieve those favorable conditions, most of the gears have their tooth form based on in volute curve, which can simply be defined as Locus of a point on a straight line which is rolled on the periphery of a circle or Locus of the end point of a stretched string while its unwinding over a cylinder as indicated in Fig. General Applications of Gears Gears of various type, size and material are widely used in several machines and systems requiring positive and stepped drive. The major applications are: • Speed gear box, feed gear box and some other kinematic units of machine tools • Speed drives in textile, jute and similar machineries • Gear boxes of automobiles • Speed and / or feed drives of several metal forming machines • Machineries for mining, tea processing etc. • Large and heavy duty gear boxes used in cement industries, sugar industries, cranes, conveyors etc.
    [Show full text]
  • Precision Tools
    Precision Tools Precision Tools Gear Cutting Tools & Broaches Pursuing advanced high-speed technology that is both user and environmentally friendly Since developing Japan's first broaching machine in the late 1920s, Fujikoshi has developed a variety of tools and machine tools to handle advancements in production systems. Fujikoshi continues to lead the way by developing machining systems that integrate tools and machines. Pursuing advanced high-speed technology that is both user and environmentally friendly Since developing Japan's first broaching machine in the late 1920s, Fujikoshi has developed a variety of tools and machine tools to handle advancements in production systems. Fujikoshi continues to lead the way by developing machining systems that integrate tools and machines. ndex Gear Cutting Tools Gear Cutting Comparison and Types 25 Broaches Design of Broach ools Guidance NACHI Accuracy of Gear Shaper Cutters 26 Technical Introduction Basic Design and Cutting Method 61 Materials and Coating of Gear Cutting Tools 5 Cutting Condition and Regrinding 27 Hard Broaches 45 Calculation of Pulling Load 62 Gear Cutting T Disk Type Shaper Cutters Type1Standard Dimensions 28 Broach for MQL 46 Face Angle and Relief Angle 63 Technical Introduction Disk Type Shaper Cutters Type2Standard Dimensions 30 Off-normal Gullet Helical Broach 47 Finished Size of Broaches 64 Hard Hobbing 6 Disk Type Shaper Cutters Type2Standard Dimensions 31 Micro Module Broaching 48 Helical Gear Shaper Cutters High Speed Dry Hobbing 7 Essential Points and Notice 65 Disk
    [Show full text]
  • New Technology of Gear Cutting That Contributes to Customer's
    Mitsubishi Heavy Industries Technical Review Vol. 49 No. 3 (September 2012) 29 Latest Gear Cutting Technology that Improves Customer Productivity (Increase in Speed of ST Series NC Guide Gear Shaping Machine) TOSHIMASA KIKUCHI*1 YOSHIHIRO NOSE*2 KATSUHIDE YABE*2 TAKAHIDE TOKAWA*3 Mitsubishi Heavy Industries, Ltd. (MHI) was the first company in the world to establish the dry cut system, which contributes to a clean work environment and high productivity by eliminating the use of cutting oil for the processing of gears. We have been actively offering new technologies, including the one mentioned above, that satisfy the needs of customers. There is a growing need for further improvement of productivity, including the reduction of processing time, from mass production lines of automobiles and other products, as well as from job shops that manufacture multiple types of gears in small quantity. In this paper, we will introduce the latest technologies for productivity improvement of gear cutting machines, taking the ST series NC guide gear shaping machine, one of the gear cutting machines developed by MHI, as an example. |1. Introduction A gear shaper is a gear cutting machine that is generally used to process internal gears and stepped gears. As shown in Figure 1, the cutter and the workpiece are rotated synchronously while the cutter is moved back and forth for processing gears. The gear shaper features a unique function, where a helical guide is used to move gears helically along the cutter lead for the processing of helical gears that are twisted along the helical path. The helical guide needs to be replaced responding to the change of the cutter lead, but helical guides are expensive and replacement requires a fair amount of time and a lot of skill.
    [Show full text]
  • TRENDS in the DESIGN of METALWORKING MACHINERY and in PRODUCTION METHODS Mmx Kronenberg, Consulting Engineer, United States of America
    OCCASION This publication has been made available to the public on the occasion of the 50th anniversary of the United Nations Industrial Development Organisation. DISCLAIMER This document has been produced without formal United Nations editing. The designations employed and the presentation of the material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations Industrial Development Organization (UNIDO) concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries, or its economic system or degree of development. Designations such as “developed”, “industrialized” and “developing” are intended for statistical convenience and do not necessarily express a judgment about the stage reached by a particular country or area in the development process. Mention of firm names or commercial products does not constitute an endorsement by UNIDO. FAIR USE POLICY Any part of this publication may be quoted and referenced for educational and research purposes without additional permission from UNIDO. However, those who make use of quoting and referencing this publication are requested to follow the Fair Use Policy of giving due credit to UNIDO. CONTACT Please contact [email protected] for further information concerning UNIDO publications. For more information about UNIDO, please visit us at www.unido.org UNITED NATIONS INDUSTRIAL DEVELOPMENT ORGANIZATION Vienna International Centre, P.O. Box
    [Show full text]
  • 2014 Tool and Die Maker
    National Occupational Analysis Tool and Die Maker 2014 Occupational Analyses Series Tool and Die Maker 2014 Trades and Apprenticeship Division Division des métiers et de l’apprentissage Workplace Partnerships Directorate Direction des partenariats en milieu de travail National Occupational Classification: 7232 Disponible en français sous le titre : Outilleur-ajusteur/outilleuse-ajusteuse You can download this publication by going online: http://www12.hrsdc.gc.ca This document is available on demand in multiple formats (large print, Braille, audio cassette, audio CD, e-text diskette, e-text CD, or DAISY), by contacting 1 800 O-Canada (1-800-622-6232). If you use a teletypewriter (TTY), call 1-800-926-9105. © Her Majesty the Queen in Right of Canada, 2014 For information regarding reproduction rights: [email protected] PDF Cat. No.: Em15-1/7-2014E-PDF ISBN: 978-1-100-25001-4 ESDC Cat. No. : LM-487-10-14E _________________________________________________________________ You can download this publication and find more information on Red Seal trades by going online: http://www.red-seal.ca FOREWORD The Canadian Council of Directors of Apprenticeship (CCDA) recognizes this National Occupational Analysis as the national standard for the occupation of Tool and Die Maker. Background The first National Conference on Apprenticeship in Trades and Industries, held in Ottawa in 1952, recommended that the federal government be requested to cooperate with provincial and territorial apprenticeship committees and officials in preparing analyses of a number of skilled occupations. To this end, Employment and Social Development Canada (ESDC) sponsors a program, under the guidance of the CCDA, to develop a series of National Occupational Analyses (NOAs).
    [Show full text]