Sliger Cerberus X ATX/EATX Computer Chassis

1701 R. J. Conlan Blvd. NE, Unit #5 Like Us Facebook See Our Instagram Palm Bay, FL 32905, USA

Toll Free: 888-381-8222 Follow Us Twitter Watch Our YouTube Performance-PCs.com www.performance-pcs.com [email protected]

Sliger Cerberus X $265.00 ATX/EATX Computer Chassis

Product Images

1 10/8/21 2 10/8/21 3 10/8/21 Short Description

Cerberus X is the worlds smallest ATX/ EATX PC case on the marking measuring in at roughly 14.97" x 6.78" x 14.09", But don't let its size fool you this Mini Chassis is build for hard work with its ability to be fully customizable this chassis is perfect for a LAN Party Rig or just for every day use.

Please Note: These cases will take up to 1 Week to be assembled and shipped.

Description

Please Note: These cases will take up to 1 Week to be assembled and shipped.

Features

Support for ATX, EATX, Mini-DTX, and Mini-ITX motherboards Compatible with air coolers up to 148mm tall (with side hinge bracket removed) Interchangable power supply mounting options for SFX, SFX-L, and ATX power supplies (8x) PCIe Expansion Card Slots for quad SLI/Crossfire/Quadro Sync support (up to 330mm long x 150mm tall) Ability to mount up to two 280mm radiators for water cooling setups Infinite vent design for mounting of any and all standard PC parts anywhere on the chassis Optional machined aluminum carry handle, 3 colors, 3 panel types, mount brackets, and more Dust filters available from Demci-Filter Designed by Kimera Industries, manufactured in the USA by Sliger

Specifications

Technical Specifications

• Extended ATX / E-ATX / EATX (305mm × 335mm max) • ATX (305mm × 244 mm) Motherboard • Mini-DTX (203mm × 170 mm) • Mini-ITX (170mm × 170 mm)

4 10/8/21

• SFX Internal Kit: 149mm with side hinge bracket removed, 142mm with the side hinge bracket installed • bequiet! Dark Rock TF (131mm) • ARCTIC Freezer Xtreme Rev. 2 (140mm) • PHANTEKS PH-TC14CS (141mm) • Noctua NH-C14S (142mm) • Thermaltake NiC L31 (145mm) CPU Air Coolers • PCCOOLER GI-X5R (148mm) • Thermolab Trinity (149mm) [contacts side panel] • Scythe Fuma Rev B (149mm) [contacts side panel] • SFX Rear Plate: 75mm max height • Noctua NH-L9x65 (65mm) • Noctua NH-L12S (70mm) • ATX Rear Plate: 48mm max height • Air coolers are not recommended, see all-in-one liquid coolers.

• Single Radiator Options • 1x 120mm radiator in bottom or front • 1x 140mm radiator in bottom or front • 1x 240mm radiator in bottom • 1x 280mm radiator in bottom • Dual Radiator Options • 2x 120mm or 140mm radiators in bottom, or mix of bottom/front. • 1x 280mm radiator in bottom w/ 25mm fans + 1x 120mm or 140mm radiator in front top of case AIO Liquid Cooler Support • 2x 240mm x 27.5mm thick radiator in front / bottom + 25mm fans on both • 2x 240mm x 30mm thick radiator in front / bottom with 15mm thick fans on both • Thickness of radiator on front of case + thickness radiator fans + GPU length must equal less than 330mm total. • Recommended to purchase a low profile USB 3.0 motherboard header adapter for 280mm radiators in bottom of case. • Some of these recommendations might not work with EATX motherboards.

• One 120mm x 15mm fan on top fan bracket (120mm x 25mm possible but depends on motherboard) • Two 140mm fans in bottom Fan Mounting • 120mm x 240mm radiator in front + 120mm x 240mm radiator in bottom (with SFX rear plate or ATX rear plate) • Slim 15mm fans behind front panel

5 10/8/21

• Bottom • Demcifilter Cerberus Bottom • Front • Demcifilter Cerberus Front • Rear (for SFX Internal Kit) • Demcifilter Cerberus Rear Filter • Side Hinge Bracket • Demcifilter Side Hinge Filter • Top, with handle (requires three pieces) Dust Filters • Handle Rear Section • Handle Middle Section • Handle Front Section • Top, no handle • Top, No Handle • Full kit, with handle • Demcifilter Full Cerberus X Kit with Handle • Full kit, no handle • Demcifilter Full Cerberus Kit, No Handle

• Maximum card height: 152mm (bottom of card PCIe tab to top of power connector wires) GPU / PCIe Cards • Maximum card length: 330mm • 8x card slot openings for up to 4-way SLI / Crossfire

• (2x) 2.5" SSD/HDD mounting points on base chassis • Optional bracket for (2x) 2.5" SSD/HDDs Storage • Optional bracket for (3x) 3.5" HDDs • Bracket can be configured for a combination of 3.5" and 2.5" drives • Custom quantity HDD / SSD brackets on request with 10 pieces MOQ

• (2x) USB 3.0 Ports Front Panel I/O • (1x) Momentary Switch / Power Status LED (Ring Shape, White)

• ATX Power Supply • Supports all lengths • SFX / SFX-L

• Chassis • ASTM-A-653 G30 Zero Spangle 20 Gauge Galvanized Steel • Side Panels • ASTM B209-10 5052-H32 0.080" Aluminum Sheet • Handle Material • Machined B308M-10 Aluminum-Alloy 6061-T6 • Feet • Cavity Molded 75 Durometer Nonmarking Black SBR • or • Machined B308M-10 Aluminum-Alloy 6061-T6

• Powder coated, panels, and feet/handle Finish • Optional Black, White, or Grey

6 10/8/21

• 14.97" x 6.78" x 14.09" (counting feet and side panels) • 380mm x 172mm x 358mm Case Dimensions (HxWxD) • 14.17" x 6.44" x 12.99" (inside dimension) • 359.92mm x 163.67mm x 330.17mm • Shipping Box: 18.25" x 16.25" x 11.25"

Additional Information

Brand Sliger

SKU SL-KICX-IK

Weight 20.0000

Color Various

Chassis Form Factor Mini-Tower

Motherboard Support ATX, E-ATX

Material Aluminum/Steel

7 10/8/21