Est. 1989

SERVICE INTRODUCTION &

COMPANY OVERVIEW CONTENTS

1. ABOUT US 2. FACILITIES 3. PLANT & EQUIPMENT HIRE 4. PRESSURE CLEANING 5. ABRASIVE CLEANING 6. ABRASIVE CLEANING 7. COATING & APPLICATIONS 8. COATING & APPLICATIONS 9. OTHER SERVICES 10. CONTRACTS 11. CONTRACTS 12. CONTRACTS 13. CLIENTS Metallisation Thermal spray equipment and consumables

SIGMA COATINGS

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk ABOUT US

Established in 1989 Mckimms Limited, was initially set up to service requirements for high quality surface preparation and coatings. Mckimms Limited is a family run business with a long and well established reputation making quality and customer satisfaction two of the main reasons for our continuing success. We have invested heavily in training, technology, plant and equipment providing an efficient service of the highest standard to many organisations across ’s .

Our modern blast cleaning and specialist coating facilities within the area allows for the high grade finishes expected in modern day projects. Depending on the project and chosen paint system we can offer a guarantee from 12 to 60 months.

Mckimms Limited operate a fully certified Quality Management System ensuring high levels of quality assurance are maintained throughout the company. We have been accredited to ISO 9001 since 2007 and Investors in People since 2005.

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk 1 FACILITIES

Location

Mckimms Limited are based in Sullom Voe in the Islands. Our premises are situated across 2 sites, both 1.5 miles from the Sullom Voe Oil Terminal and Shetland Gas Plant, making it an ideal location for projects both on and off site.

Our yard is only half a mile from the Shetland Islands TOFT S.G.P Council Ports & Harbours base making it ideal to S.V.T MOSSBANK transport boats lifted with their 70Tonne boat hoist. Our rates are very reasonable and we can accommodate S.I.C numerous boats at any one time.

BRAE Workshop & Yard Capacity Est. 1989

430m2 of Blasting and painting facility 15,000m2 Yard capacity

To add to our blast facilities we have recently designed and installed a new blast enclosure which allows larger projects to be carried out under controlled conditions through to completion. This is 90m2 of heated blast room with automated grit recovery and dust extraction. Located directly opposite one of our spray shops projects are then transfered to be coated up.

In our yard we can undertake any size of project. If it can be transported, we can accommodate it. Here we can perform open blasting using various environmentally friendly abrasives, we have various shelters and scaffolding to provide cover should the project require.

In our secure yard we can offer yard space and storage rental to suit your requirements. We can supply various storage facilities, should it be simply laydown area or yard space, storage containers, office & workshop space or more permanent solutions for long term rental.

2 t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk PLANT & EQUIPMENT HIRE

At Mckimms Limited we have a wide range of plant and equipment to allow us to carry out our work in an efficient and safe manner both on and off-site. We also have a range of equipment and plant available for hire.

Our machines are fully certified and fitted with Chalwyn valves and spark arrestors making them safe for petrochemical sites. Some of our hire items include:

60ft cherry picker 40ft cherry picker Electric & Diesel Scissor lifts Mobile Compressors (85 - 1080cfm) Volvo EC25 Mini Digger Telehandler Blast pots (various sizes) Wet / Slurry blast pots Closed circuit vaccum blast unit Hand held vaccum blast machines Air & electric Bristle Blasters Blast Helmets Air Delivery & Blast Hose Pipe internal spin blaster and coating equipment Air driven airless spray units up to 70:1 Petrol driven airless spray units Electric spray units Conventional spray units Battery operated cordless spray gun MK73 Thermal Flame spray system Hot and cold pressure washers (air, electric, diesel & petrol) Mobile dust extraction (air & electric) Air movers Automated grit recovery units Clemvacs Dehumidifiers Water Bowsers Trailers Safety & Work boats

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk 3 PRESSURE CLEANING

Pressure Cleaning is an essential stage of our painting process. It is important to remove any contaminants from the substrate prior to blasting. Our high pressure machines fitted with a turbo lance are efficient in removing heavy rust or paint prior to blasting in order to cut down on grit used to clean the surface making the job more efficient and cost effective. Some of our pressure washing services include:

Boat cleaning Tank internal & external Vehicle cleaning Pipe cleaning Structure cleaning Roof and floor cleaning Moss and dirt removal

We have numerous high pressure washers including Petrol, Diesel, Electric and Air driven machines allowing work to be carried out in any circumstance. We also have towable bowsers with or without a pressure washer mounted to the trailer making for an efficient service in remote locations. These are used for heavier applications which include rust removal and surface preparation in any marine or industrial environment.

4 t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk ABRASIVE CLEANING

At Mckimms Ltd we have facilities and equipment which allow grit blasting to be carried out in most conditions and circumstances, both on and off-site. We use various types of abrasives, from re-usable steel grit to the softest expendable materials, each for different requirements and surface profiles. Our facilities and equipment include:

Open Blasting

In our extensive yard we can carry out blasting jobs of any size. We have the materials and equipment to completely cover in a project should it require. We also have a number of fully mobile sets of equipment allowing blasting to be carried out on or off site. We have over 30 blast pots ranging from single bag ibex units to 7 bag 2452 units for larger projects.

Blast Rooms

We have 2 separate heated blast rooms, both with dust extraction, automated grit recovery and cleaning systems. We use re-usable steel grit making for a more cost effective and productive project.

40m2 for projects up to 40ft long 100m2 for larger projects

We also have a Blast cabinet used for smaller applications (brackets, washers, wheels, etc).

Slurry/Wet Blasting

Slurry blast units are ideal for heavy industrial cleaning applications and typical uses include but are not limited to: cleaning of ship hulls, tank internals, offshore maintenance and general steel fabrication. The media is totally saturated in water within the system, fully dampening any airborne fines and dust during the blasting process. This is ideal in areas where excessive dust may be an issue.

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk 5 ABRASIVE CLEANING....

Closed Circuit Blasting

Eductomatic The Eductomatic is a portable closed circuit suction unit. It provides effective containment of dust and abrasive. A range of heads are available to provide a seal against most surfaces. A 360° swivel blast head enables cleaning at all angles and with a total weight of 3 kg it is light and manoeuvrable. A recyclable abrasive is normally used which is cleaned by the unit, with all dust contained in an attached dust bag.

Eductoblast Combining Hodge Clemco’s standard portable blast cleaning equipment and abrasive recovery system creates an efficient closed circuit blast system - The Eductoblast is an air powered unit and is ideally suited for use with metallic abrasives. The collection hopper is particularly useful for safe disposal of lead based coatings.

Pipe Internal

We have invested in 2 specialist pieces of equipment to allow us to blast pipe internals from 2 inch up to 36 inch. The Hollow Blast will effectively blast pipes from 2 inch up to 12 inch, the abrasive hits the tungsten carbide deflector tip and fans out to clean the 360 degree interior.

Our Spin Blast machine will blast pipes from 8 inch up to 36 inch. Complete removal of virtually any contaminant to white metal can easily be achieved, making it a favourite of refineries, pipe liners, chemical producers, water and gas companies.

Abrasive Recovery Units

Our air operated recovery units provide a cost-effective abrasive recovery solution. With only one major moving part, the recovery unit requires no electrical power, making for an overall more efficient blast cleaning process. It uses a cyclone to separate dust from reusable grit, which falls under gravity into the hopper for safe disposal or re-use. Meanwhile, the dust is drawn into a filter box before being discharged through the Jet Pump as clean air.

Mobile Dust Extraction

Mckimms have recently invested in a new state of the art 6000cfm fully automated air driven dust extraction system. The sole use of air for the automated reverse jet pulse system and motor eliminates the chance of sparks, making it ideal for refineries or live plants. It is mobile and can easily be moved using the dedicated lifting points by forklift, crane or hi-ab.

6 t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk COATINGS & APPLICATIONS

In our fully equipped paint shop facilities we can apply any paint system under controlled conditions. We are experienced in applying a wide range of coatings to suit any specification and are also the local agent for Sigma Coatings, part of the PPG group.

We have the ability to apply anything from basic holding primers to glass flake tank coatings using airless, conventional and high volume low pressure (HVLP) paint spraying methods.

Some of our coatings include: Our coatings services include:

Universal coatings for zinc, Corrosion control aluminium, steel, PVC Sealing and dust proofing Heat Resistant coatings Fungicidal applications for Flame retardant paints hygienic environment High build epoxy coatings Industrial plant and vehicle refinishing Intumescent coatings Tank and pipe coating Polyurethane coatings internal / external Hygiene coatings Fireproofing Servi-wrapping Floor coatings Thermal Spraying Marine antifouling Anti corrosion finishes

Thermal Spraying

We are fully trained in thermal spray applications and use the MK73 Flame Spray System. Thermal spraying is employed worldwide in countless applications where a metal surface is required to be applied in an efficient, cost effective and quality controlled manner.

Materials commonly sprayed: Zinc, Aluminium, Zinc Aluminium Alloy, Copper, Nickel, Brass, Bronze.

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk 7 COATINGS & APPLICATIONS....

Servi Wrapping / Stopaq

Mckimms have received full training in servi wrapping and since becoming approved applicators in 2008 have been involved in many projects from start to finish. We stock various sizes of the servi wrap and primer, which is kept in controlled conditions.

We have been involved in various on and off site projects that require the use of Stopaq to protect field joints and flanges.

Pipe Internal Coating

We have 2 pieces of equipment that allow us to coat the internal of pipes from 3 inch up tp 38 inch. The Mini Rormaster R9003 is used to coat pipe internals from 3 inch to 6 inch and the Rormaster II R9001 will comfortably spray pipe internals from 6 to 38 inch. We use the R9400 Control Gun to accurately control the spraying process.

Belzona Repairs

We are approved applicators for many Belzona products, including concrete repairs and coatings, flat roof coatigs and flange face forming.

8 t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk OTHER SERVICES

Inspection Services

At Mckimms we have a full time ICOR Level 2 Coatings Inspector and a full time Nace Level 1 Coatings Inspector. We not only offer inspection for our own work but can offer 3rd party inspection for any project, be it for a day or more lengthy contracts. A detailed inspection report is presented on completion of the job.

Hydro Testing

It is very important that blast pots and other pressure vessels are regularly tested to ensure their integrity has not been jeaporadised due to corrosion or damage. We have been trained and certificated to carry out hydro testing on pressure vessels. Once the equipment has been checked and we are satisfied with the results we will issue a certificate and test plate for each piece of equipment, as standard blast pots are usually checked every 12 months.

Equipment Servicing & Repair

We stock an extensive range of spares for most equipment and plant used for all disiplines of blasting and painting. Genuine Graco repair kits for pumps and guns, tips, paint lines, hoses, fittings, filters, breathing air box and compressor spares.

We are fully trained and certificated to service and repair Spray Units, Breathing air boxes, Blast pots and dust extraction equipment.

Yard & Storage Rental

Within our our premises there is scope for outside contractors to rent secure yard or office space, shed and storage rental. We have numerous options and locations within our premises which can be tailored to the clients specific needs.

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk 9 CONTRACTS

BP / Bilfinger

Project: 60ft of 46” Crude oil tank overflow pipework

Products: Intergard 202 Intergard 356 Interthane 990

BP / Motherwell Bridge

Project: 5 sets of 134 no. Crude oil tank floating roof legs.

Product: Interline 982 Interzone 1000 Interzone 954

BP / Bilfinger

Project: Crude Oil Tank Rolling Roof Ladder

Products: Intergard 269 Intergard 356 Interseal 670HS Intergard 740

10 t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk CONTRACTS....

Peterson (SBS)

Project: 3,500T Diesel Tank

Products: Sigmacover 690 Sigmacover 630 Sigmacover 456HS

Malakoff

Project: Sullom Voe Jetty Fenders

Products: Zinc Thermal Spray Sigmacover 522 Sigmashield 880

S.I.C Ports & Harbours

Project: Fleet of Tugs

Products: Sigmacover 690 Sigmacover 456 Sigmadur 550

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk 11 CONTRACTS....

BP SVT

Project: High Temperature Main Flare Lines

Products: Sigmatherm 228

SGP

Total: Sika repairs, PFP Removal

Costain: CMRU/HCL Projects Structural & pipe coatings,Vessel internal blasting, Vessel internal repairs, concrete prep, Stopaq

BBK: CMRU/HCL Projects Structural & pipe coatings

Petrofac: Structural punch list items Wood:

BP SVT

Project: Crude Oil Pig Receiver

Products: Interplus 356 Interseal 670HS Interfine 691

12 t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk CLIENTS

For further information on our Contracts, Policies and Services please contact us:

t /f. 01806 242 160 David. 07595 381 802 e. [email protected] Steven. 07547 647 409 w. www.mckimmshotblasting.co.uk Allan. 07831 219 495

t. 01806 242 160 e. [email protected] w. www.mckimmshotblasting.co.uk 13