AUCTION COMPLETE RAILCAR RENOVATION & REPAIR FACILITY Including: Ultra Late Model JBI Painting Facilities and Railcar Shot Blasting System; 2002 Grove 15 T

AUCTION COMPLETE RAILCAR RENOVATION & REPAIR FACILITY Including: Ultra Late Model JBI Painting Facilities and Railcar Shot Blasting System; 2002 Grove 15 T. Carry Deck Crane; Heavy Fabricating Equipment; Late Model Welding Machines; (2) Kone Overhead Bridge Cranes, New 2004; Late Model Rough Terrain and Cushion Tire Forklifts; Air Compressors; Large Quantity of Hand and Power Tools; Material Handling Equipment; Much, Much More!

At the Premises of RAILROAD REPAIR FACILITY FKA GE CAPITAL RAIL SERVICES 2801 Northcutt Street TEXARKANA ARKANSAS 71854 (See Directions on Back Page)

2001 WEDNESDAY DECEMBER 15 RAILCAR BLAST BOOTH PREP AREA JBI DOWNDRAFT PAINT BOOTH 1O:00 A.M.

INSPECTION: Tuesday, December 14, A 10% BUYER’S PREMIUM WILL APPLY 9:00 A.M. to 4:00 P.M. & Morning of Sale

2002

2004

VIEW OF (2) KONE 20 T. X 58' SPAN OVERHEAD BRIDGE CRANES GROVE 15 T. CARRY DECK CRANE

Read Terms and Conditions on Back Page of Brochure

Sale Conducted By: In Conjunction With: PLANT & MACHINERY INC. AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043 PHONE: (713) 691-4401 FAX: (713) 672-7905 E-MAIL: [email protected] • WEBSITE: www.pmi-auction.com 77 East Palatine Road • Prospect Heights (Chicago), IL 60070 Phone: 312-280-1234 • Fax: 312-280-1266 Bob Braman, AR Lic.#1349 • Ron Moore, AR Lic.#1348 2001 AUCTION At the Premises of RAILROAD REPAIR FACILITY FKA GE CAPITAL RAIL SERVICES 2801 Northcutt Street TEXARKANA, ARKANSAS 71854 (See Directions on Back Page)

WEDNESDAY, DECEMBER 15 • 1O:00 A.M.

2001 INSPECTION: Tuesday, December 14, 9:00 A.M. to 4:00 P.M. & Morning of Sale

DOWNDRAFT PAINT BOOTH JBI MDL. TCP2-48W/CF-S, new 2001, approx. dims: 20'W. x 90'L. x 20' ht., side down-draft design w/replaceable fiber filters, (2) digital controlled heated make-up air units, (6) high cap. exhaust fans, auto. booth balance, gas fired bake cycle, galvanized panel construction w/stiffener channels, multiple man entry doors, approx. (60) 4-tube fluorescent lighting fixtures, (2) rail guided 2-axis personnel lifts w/vert. and hz. motion, joy stick controlled, Raynor 13'W. x approx. 20' pwr. roll-up door, (2) man doors, Work Order No. 15538. EXTERIOR VIEW OF EXHAUST SECTION OF JBI JBI DOWNDRAFT PAINT BOOTH DOWNDRAFT PAINT BOOTH

END DRAFT PAINT BOOTHS (2) JBI RAILCAR INTERIOR TYPE, new 2002 and 2001, dbl. booth, end draft, heated make-up air, 100'L. x 50'W. x 20' ht. ea. booth, galvanized panel construction, central air make-up system, gas fired bake cycle, central booth control systems w/digital temp. controls and bake timers, (2) man entry doors, (24) 4-tube fluorescent lighting fixtures, Harrington fire protection systems, booths accom- modate interior painting of (2) railcars while (2) cars are in bake cycle, S/N 38553, Contract No. 580005960 (new 5/2002), No. 580002595 (new 10/2001). (2) CUSTOM, built new 1980, 15'W. x 70'L. x 20' ht. booth, 10' ht. mezzanine, (40) 4-tube fluorescent lighting fixtures, unitized panel construction. RAILCAR BLAST BOOTH WHEELABRATOR/HOFFMAN, new 1964, major renovation/addition by Hoffman in 2001, PREP AREA: approx. dims.: 15'W. x 60'L. x 20' ht., painted panel construction, fluorescent lighting, WHEEL BLAST SECTION: Wheelabrator multi- wheel railcar blast system, approx. dims: 15'W. x 70'L x 20' ht., manganese liner, (16) 24" dia. blast wheels, 15 HP belt drives, (6) side blast wheels each side, (4) top blast wheels, auger screw shot recovery system with elevator and separator, internal car puller, HAND BLAST SECTION: approx. dims: 20'W. x 90'L. x 20' ht., 10' ht. bar grate mezzanine, auger screw shot recovery w/(4) floor augers, bucket elevator return, 6' x 6' x 4', shot storage tower, 1,500 gal. air receiver tank, (4) Schmidt 5 cu. ft. blast pots, blast hose and accessories, Hoffman cartridge style dust collector, Northern 60 HP squirrel cage blower, (96) 4' fluorescent fixtures, (3) man doors, large dbl. entry doors at either end, manganese panel construction, S/N A115814.

PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at: www.pmi-auction.com.

< EXTERIOR VIEW OF JBI INTERIOR VIEW OF JBI END DRAFT PAINT BOOTH END DRAFT PAINT BOOTH 2 RAILCAR BLAST BOOTH PREP AREA

INTERIOR OF HAND BLAST SECTION RAILCAR BLAST BOOTH OF RAILCAR BLAST BOOTH WHEEL BLAST SECTION

AIRLESS PAINT PUMPS (2) GRACO MDL. 245-111, Series B02A, 56:1 ratio, S/N 244-476, S/N N.A. (2) GRACO MDL. 245-111, Series C02A, 56:1 ratio, S/N’s N.A. WATER BLAST UNIT NVL CORP. MDL. 1045DB-5/8, 10,000 PSI, Isuzu 4 cyl. diesel engine, NVL high pressure piston style pump, solution tank w/float control, skid mtd., S/N 106021-5. PRE-HEAT FURNACES CUSTOM, (2) burners, gas fired, dbl. ended, dims: 18" ht. x 24"W. x 36" dp., 2,000 deg. F. max. temp., counterweighted doors. JOHNSTON MDL. 3618-60, dims: 36"W. x 18" ht. x 60" dp., (4) burners, gas fired, 2,400 deg. F. max. temp., fire brick lined, S/N 1123. (2) JOHNSON MFG. MDL. 315-3656, gas fired, dims: 36" x 56", 2,400 deg. F. max. temp., S/N 1129, S/N N.A. RAILCAR SERVICE EQUIPMENT (2) HYDRATECH MDL. FSP-20T FRICTION CASTING PRESSES, new 1998, dual hyd. rams, elec. pwrd. hyd. pwr. supply, S/N J540-12, S/N J540-14. RAILCAR BLAST BOOTH EXIT END (HAND BLAST SECTION) (4) POWERTEAM PORTABLE HYDRAULIC BEARING PRESSES, approx. 50 T. cap. cylinders, some w/elec. pwrd. hyd. units. RAILCAR SANDBLAST BOOTH ASSORTED WHEEL PULLER AND BEARING PULLER ACCESSORIES for Powerteam hyd. pullers. CUSTOM, Delta controls, approx. dims: 20'W. x 130'L. x 20' ht., expanded metal mezzanine on either side, (40) 4-tube fluores- (12) HUCK MDL. 903 HYDRAULIC POWER SUPPLIES, 440 v., 5 HP motor, on cent lighting fixtures, manganese steel panel construction, dbl. roller bases w/Huck guns, hoses and accessories. entry doors at either end, recirculating shot system including (4) HUCK MDL. 908 HYDRAULIC POWER SUPPLIES, 10 HP motor w/Huck (3) Clemco Mdl. 2452 - 6 cu. ft. portable shot blast pots w/pneu. guns, hoses and accessories. wheels, new 2000, Clemco Mdl. 3658 - 10 cu. ft. stationary sand TEST VAT for testing safety valves; SAFETY VALVE SAFETY PRESS; SAFETY blast pot w/fabricated steel frame, new 2001, 6'W. x 6' dp. x 8' ht. grit storage tower w/hopper bottom and gate valves, Hi-Vac 50 VALVE TEST STAND w/air scare controls. HP vacuum abrasive recovery system, Mdl. 475, S/N HV3527, (6) PORTABLE HYDROSTATIC TEST UNITS, 5 HP drive, bean piston style new 2000, 659 hr., bag house dust collector. pumps w/reservoir.

10,000 PSI

EXTERIOR VIEW OF CUSTOM RAILCAR SANDBLAST BOOTH HI-VAC SHOT NVL CORP. WATER BLAST UNIT RECOVERY SYSTEM 3 IOWA PRESS HYDRAULIC PRESSBRAKE STEELWELD 5/8" X 8' MECHANICAL SHEAR HILL ACME KLING IRONWORKER

At the Premises of RAILROAD REPAIR FACILITY AUCTION FKA GE CAPITAL WEDNESDAY, DECEMBER 15 RAIL SERVICES 1O:00 A.M. 2801 Northcutt Street TEXARKANA, ARKANSAS 71854 INSPECTION: Tuesday, December 14, 9:00 A.M. to 4:00 P.M. & Morning of Sale (See Directions on Back Page)

PRESSBRAKES PIPE & BOLT THREADERS CHICAGO DREIS & KRUMP MDL. 510D MECHANICAL, 12' overall, 10'-6" dist. OSTER 4", Mdl. 84T, 1/2" to 4" pipe cap., 3/8" to 3" bolt cap., btn. housings, 4-way lower die, S/N P8815. quick change chuck, (4) die heads, S/N 784T-TU-70. IOWA PRESS 125 T. CAP. HYDRAULIC, 12' overall, 10'-6" dist. btn. housings, RIDGID 2", Mdl. 535, (3) self-opening die heads, reamer and approx. 12" stroke, unitized hyd. system, hydro-mechanical action. roller pipe cutoff on portable stand, S/N EBE021351202.

MECHANICAL SHEAR PIPE BENDER WALLACE APPROX. 3" CAP., hyd. mandrel extractor, STEELWELD 5/8" X 8', Mdl. 10D-8, 36" deep throat, adj. blade clearance, front wiper die. operated pwr. backgauge, 10' L.H. squaring arm, S/N N3790. FORGING HAMMERS IRONWORKERS LITTLE GIANT MDL. T MECHANICAL, 15 HP drive motor, (2) HILL ACME KLING 125 T. CAP., new 1963 and 1961, 24" throat depth punch S/N 563. end w/3-punch arrangement, approx. 2" bar shear cap., 5" x 1/2" angle shear, ERIE MDL. 550 AIR, off-set design, guided ram, S/N 3387. notching attach., S/N 46-417 (1961), S/N 477917 (1963). MISCELLANEOUS MACHINERY OPTICAL PATTERN TORCH TANNEWITZ MDL. R1 VERTICAL BANDSAW, 42" throat, approx. 30" cutting height, 36" sq. tilting worktable, 10 HP KOIKE SANSO MDL. 1K1200J, new 1982, 49" cutting width, (2) oxy. fuel heads, drive motor, S/N 7663. roller pattern table, optical pattern reader, 8'W. cutting table, 160" ttl. cutting length, S/N 3467. WHITNEY APPROX. 100 T. CAP. HYDRAULIC SINGLE END PUNCH, 12" throat depth mtd. on H.D. suppt. frame, self-contained hyd. unit. TRINCO MDL. 36/450 DELUXE DRY BEAD BLASTER, dust collector, recovery hopper, S/N 59168-3. ENCO POWERFUL VERTICAL DRILLING MACHINE, new 1993, 5 HP motor, 26" sw., 17-1/2" x 23" tilt/swivel table, #3 MT spdl., S/N 3387. 20" ABRASIVE CUT-OFF SAW, swivel vise, 10 HP motor; CUSTOM 5 T. CAP. HYDRAULIC C-FRAME PRESS w/unitized hyd. system; CUSTOM 24"W. HYDRAULIC BRAKE; CUSTOM U-BENDER w/various dies for bending U-shaped materials; KOIKE MDL. IK-12 MAX 3 TRACK TORCH, (6) pcs. of 6'L. track, oxy. fuel head; DAYTON 20" PEDESTAL MOUNTED DRILL PRESS; CAROLINA 50 T. WALLACE 3" PIPE BENDER CAP. H-FRAME SHOP. WHITNEY HYDRAULIC PUNCH 4 WELDING MACHINES MILLER MDL. DIMENSION 652 WELDING 2003 POWER SOURCE, new 2003, 650 amp output @ 44 v., 100% duty cycle, Miller Mdl. S60 wire feeder, S/N LC197422. (8) LINCOLN MDL. IDEALARC DC600 DC ARC WELDING POWER SOURCES, 600 amp output @ 44 v., 100% duty cycle S/N AC683672, S/N AC772240, S/N AC87- 1269, S/N AC865656, S/N AC871270, S/N U1930910507, S/N U1930812279, S/N U1930710385. ERICO MDL. ESS1500 SOLID STATE STICK/STUD WELDING POWER SOURCE, stick welding: 600 amp output @ 44 v., 60% duty cycle, weld studs from 3/16" to 3/4". (3) LINCOLN IDEALARC R3R500 WELDING POWER SOURCES, 500 amp output @ 40 v., 100% duty cycle, S/N AC631708, S/N AC787767, S/N N.A. (11) LINCOLN MDL. TM500/500 AC/DC ARC WELDING POWER SOURCES, 500 amp output @ 40 v., 60% duty cycle, single MILLER DIMENSION 652 WELDER PBS BARTECH LOCALIZED phase, S/N’s N.A. STRESS RELIEVING MACHINE (3) MILLER MDL. DIMENSION 452 WELDING POWER SOURCES, new 2001, PORTABLE WELDER/GENERATORS 450 amp @ 38 v., 100% duty cycle, digital (2) MILLER BOBCAT MDL. 225G, AC/DC welder and 8,000 watt generator, 225 amp output @ 25 v., volt and amp meters, S/N LB106194, S/N 100% duty cycle AC, 210 amp output @ 25 v., 100% duty cycle DC, S/N KC203470, S/N N.A. LB16395, S/N LB148801 w/60 Series wire feeder, S/N KG188109 w/aluminum gun. MILLER BOBCAT MDL. 250 WELDING POWER SOURCE, gasoline pwrd., 10,000 watt generator, 250 amp output, mtd. to pneu. tire trailer, welding leads, oxy./acy. torch set and toolbox, S/N N.A. (4) MILLER MDL. DELTAWELD 452 MIG WELDING POWER SOURCE, new 2000, MILLER LEGEND MDL. AEAD-200LE GENERATOR/WELDER POWER SOURCE, 210 amp output 450 amp output @ 38 v., 100% duty cycle, @ 25 v., 100% duty cycle AC, 200 amp output @ 20 v., 100% duty cycle DC, S/N N.A. Miller Mdl. S62 wire feeder, digital amp and volt meters, S/N LA076097, S/N LA278440, PORTABLE PLASMA CUTTERS S/N KH364746, S/N LA275054. HYPERTHERM MDL. POWER MAX 1250, 25 amp output @ 90 v., plasma torch, S/N 1250-006705. (13) MILLER MDL. DELTAWELD 451 MIG THERMAL ARC MDL. PAK 10XR, 55 amp output @ 100 v., 60% duty cycle, torch, on roller base, WELDING POWER SOURCES, new 1990Ð S/N H70542A18323A. 1993, 450 amp output @ 38 v., 100% duty cycle, 70 Series wire feeder, S/N KC218828, LOCALIZED STRESS RELIEVING MACHINES S/N KC221770, S/N KC232573, S/N KC21- (2) PBS BARTECH MDL. PCE-6/12-R1, (12) leads, strip chart recorder, digital control systems, 5128, S/N KA774314, S/N KC246580, S/N S/N 041443, S/N N.A. KC258362, S/N KA766995, S/N KC198312, S/N KA771177, S/N KA774312, S/N KC24- MISCELLANEOUS WELDING EQUIPMENT 2631, S/N KA771175. MILLER MDL. LOAD BANK WELDER CALIBRATOR, new 1994, digital amp and voltage read-outs, MILLER MDL. CS450 WELDING POWER S/N KE699363. SOURCE, 450 amp output @ 38 v., 100% duty ASSORTED MILLER WIRE FEEDS; WELDING HELMETS; FACE SHIELDS; OXY./ACY. CUTTING cycle, set-up as stick welder, S/N JE785586. TORCHES WITH ACCESSORIES AND PARTS; PORTABLE LIGHTING; AUTOMATIC HOSE REELS; OXY./ACY. SUPPLY HOSES; WELDING LEADS; SPARK IGNITERS; REGULATORS; MILLER MDL. MP45E WELDING POWER WELDING WIRE; PHOENIX DRY ROD ELECTRODE OVEN. SOURCE, 450 amp output @ 38 v., 100% duty cycle, S/N JE433103. MILLER MDL. DIMENSION 400 WELDING < POWER SOURCE, new 1987, 400 amp output THERMAL ARC PORTABLE PLASMA CUTTER @ 35 v., 100% duty cycle, S/N JH221373. LINCOLN MDL. IDEALARC R3R400 WELDING POWER SOURCE, 400 amp output @ 40 v., 60% duty cycle, S/N AC419796. MILLER MDL. SYNCROWAVE 350 HELIARC WELDING POWER SOURCE, new 1990, 300 amp output @ 32 v., 60% duty cycle, 350 amp output @ 34 v., 40% duty cycle, digital volt and amp meters, TIG torch, Coolmate, foot pedal, roller base, S/N KA751096. MILLER MDL. DIMENSION 302 WELDING POWER SOURCE, new 2000, 300 amp output @ 32 v., 100% duty cycle, S/N LA056150. LINCOLN MDL. SAE300 MOTOR/ GENERATOR WELDING POWER SOURCE, S/N AC139221. MILLER BOBCAT MDL. 250 PORTABLE WELDER 5 YARD VEHICLES 2002 EZ-GO WORKHORSE 650 LB. CAP., gasoline pwrd., rough terrain tires, 44" x 32" lined bed, windshield, S/N 1293655. EZ-GO WORKHORSE 1,000 LB. CAP., gasoline pwrd., diamond plate construction, rough terrain tires, 36" x 48" rear bed, S/N A51936. EZ-GO WORKHORSE, gasoline pwrd., 1,200 lb. rated cap., lighted, all weather curtains, 40" x 48" lined dump bed, S/N 1396623. TRAVELING GANTRY CRANES (2) LOADLIFTER 20 T. X 64' SPAN, free standing, rail mtd., 18' wheel gauge on end truck, 20 T. underhung wire rope hoist, pendant control, AC pwrd., pwr. trolley, dual worm gear drive on gantry. OUTDOOR CRANE SYSTEM LOADLIFTER 15 T. X 62' SPAN X 20' HT., mtd. on 100'L. free-standing A-frame style runway, bolted construction, AC electrification, dbl. box girder design, center drive, AC pwrd., pendant control. PORTABLE PLATFORM LIFTS GROVE 15 T. CARRY DECK CRANE (5) GENIE MDL. GS2032, self-propelled, battery pwrd., 20' platform height, 32' working height, extendable pulpit, ground controls, non-mark cushion tires. (4) JLG SIZZOR MDL. CM2033, 20' platform height, 33' working height CARRY DECK CRANE self-propelled, battery pwrd., extendable pulpit, joy stick controls, on-board GROVE 15 T. CAP., Mdl. YB4415XT, new 2002, 17' to 40' 3-section full power boom, battery charger, lower controls. 4-wheel steering, diesel pwrd., BF Goodrich 385/65R22.5 tires, hyd. outriggers, 786 hr. meter reading, S/N 320280. MATERIAL HANDLING EQUIPMENT (2) HYDRAULIC PALLET JACKS; 4,450 LB. AUTOMOTIVE STYLE JACK; 500 LB. AUTOMOTIVE STYLE JACK; WIDE ASSORTMENT OF SIMPLEX FORKLIFTS & DUFF NORTON RAILROAD JACKS up to 20 T. cap.; DUFF NORTON 60 CLARK 13,500 LB. CAP. MDL. GPH60, new 1996, LPG, pneumatic tires, 239' lift T. CAP. BOTTLE JACKS; HYDRAULIC RAMS; CAROLINA SHOP HAND height, 152" 2-stage mast, fork positioner, side shifter, 60" forks, S/N Y1065-236-8946. MDL. 5000 PORTABLE HYDRAULIC CHERRY PICKER; 36" W. X 4' HT. PLATFORM ROLLING LADDERS; SHACKLES; CHOKERS; DUFF NORTON TOYOTA 10,000 LB. CAP. MDL. 6FGCU45, new 2001, LPG, solid tires, 187" lift height, 35 T. CAP. AIR JACKS, 14" stroke, caster bases; INGERSOLL-RAND AND 92" 3-stage mast, side shifter, fork positioner, 48" forks, S/N 62620. CM 1-1/2 T. CAP. COME-A-LONGS; PORTABLE HAND OPERATED HYDRAULIC POWER SUPPLIES; PORTABLE HYDRAULIC JACKS; (2) TOYOTA 8,000 LB. CAP. MDL. 7FGCU35, new 2002, LPG, solid tires, 187" lift RIDGID FRAME WIRE BASKETS; COLLAPSIBLE WIRE BASKETS in height, 87" 3-stage mast, side shifter, 42" forks, S/N 60930, S/N 60904. various sizes up to 48" x 60" x 48"; (4) DIAGRAPH STENCIL MAKERS; HYSTER 8,000 LB. CAP. MDL. S80XL, new 1999, LPG, solid tires, 172" lift height, PRESS; HAND TRUCKS; (13) SELF-DUMPING HOPPERS some on casters w/forklift entry up to 2 cu. yd. cap. 83" 3-stage mast, 42" forks, S/N D004D8115W. JOHN DEERE 6,000 LB. CAP. ROUGH TERRAIN, Mdl. 482C, 48" forks, 3-stage mast, RAILROAD SWITCHER LOCOMOTIVES 4-cyl. diesel engine, 21' see-thru mast, S/N 72999. ELECTROMOTIVE MDL. D004115, diesel electric, S/N 53E16. JCB 6,000 LB. CAP. ROUGH TERRAIN, Mdl. 930, Perkins 4-cyl. diesel engine, 4 WD, ELECTROMOTIVE MDL. 8150640, diesel electric, S/N A10055. Goodyear L-2/G-215.5-25 rough terrain tires, partial all weather cab, 21' 3-stage see-thru mast, S/N 607813. NISSAN 5,600 LB. CAP., Mdl. EGH02D-00C, Series 50, diesel pwrd., 2-stage see-thru mast, 130" max. lift ht., large dia. cushion front tires, 48" front forks, S/N EGH02A3CW. NISSAN 5,600 LB. CAP., Mdl. EGH02A3000, diesel pwrd., 3-stage see-thru mast, 187" lift height, S/N EGH02-00188. HYSTER 5,000 LB. CAP. MDL. S50XM, new 1998, LPG, solid tires, 189" lift height, 83" 3-stage mast, side shifter, 42" forks, S/N D004D10654V.

OVERHEAD BRIDGE CRANES (2) KONE 20 T. X 58' SPAN, new 2004, 20' lift ht., top running, dbl. girder, dbl. end drive, Mdl. CXT unitized hoists, pendant control, AC pwrd., built-in dynamometer w/digital weight read-out, S/N 8160137A, S/N 8160137B. (2) LOADLIFTER 25 T. X 75' SPAN, 5 T. aux. hoist, AC pwrd., pendant control, approx. 25' lift. (2) CLEVELAND TRAMRAIL 8 T. CAP. X 75' SPAN TRAMBEAM, underhung, dbl. girder, P&H underhung wire rope hoist w/pendant control, AC pwrd., 18' lift ht. PARTIAL VIEW OF MATERIAL HANDLING EQUIPMENT

2001

JOHN DEERE 6,000 LB. ROUGH TERRAIN FORKLIFT JCB 6,000 LB. ROUGH TERRAIN FORKLIFT TOYOTA 10,000 LB. CAP. FORKLIFT 6 2004

VIEW OF (2) KONE 20 T. X 58' SPAN OVERHEAD BRIDGE CRANES LOADLIFTER 20 T. X 64' GANTRY CRANES

MISCELLANEOUS SHOP AIR COMPRESSORS & WAREHOUSE EQUIPMENT QUINCY MDL. QSI1250ANA34C ROTARY SCREW TYPE, new 1999, 1,250 MASTER PORTABLE TORPEDO HEATERS, kerosene fired, 600,000 CFM output, approx. 24,000 hr. meter reading, air cooled, S/N 99773H. BTU, and 350,000 BTU size, portable frame; (24) ATLAS INDUSTRIAL (2) QUINCY MDL. ST15ANA3SB ROTARY SCREW TYPE, 1,500 CFM BICYCLES, large cap. front mtd. baskets, tractor style seat, coaster cap., 300 HP drive motor, skid mtd., air cooled, S/N 38362, S/N 37804. brake; HEAVY DUTY SHOP VACUUMS; (22) TRIANGLE ENGINEERING INGERSOLL-RAND MDL. SSR1200L-AAK1 ROTARY SCREW TYPE, MDL. SPL4223 - 42" DIA. PORTABLE FANS on roller frame; 1,200 CFM @ 100 PSIG rated output, 290 HP drive motor, skid mtd., air CLEMCO AIR SUPPLY BLAST HOOD; AIR VENTURIES; GASOLINE cooled, S/N 22781U79B. POWERED WATER BLASTER w/Honda engine; BATTERY CHARGER; PAINT HOSES (UNUSED); AUTOMOTIVE STYLE INGERSOLL-RAND MDL. SSRXFE50, new 1987, 215 CFM @ 100 PSIG rated output, 60 HP drive motor, skid mtd., air cooled, S/N D4810U87C. CREEPERS; (6) ROTATING PARTS BINS, multi-tiered w/large qty. of fasteners: hex head bolts, cap screws, lock washers, nuts, flat washers, INGERSOLL-RAND MDL. SSREP75, 75 HP drive motor, air cooled, skid etc.; ASSORTED AIR HOSES up to 3/4" dia.; WIRE SPOOLS; mtd., S/N N.A. CONDUIT; STARTERS; CONDULETS; CONDUIT FITTINGS; RECEPTACLES; DISCONNECT BOXES; TRANSFORMERS; HEAVY BREATHABLE AIR AIR COMPRESSOR DUTY AIR FITTINGS for 3/4" air hose; PVC PIPE FITTINGS; LIGHTING INGERSOLL-RAND MDL. SSR-ET100 ROTARY SCREW TYPE, new FIXTURES; FLEXIBLE COPPER TUBING; FORKLIFT PARTS; 1992, 446 CFM cap., 100 HP drive motor, air cooled, fully enclosed, skid FUSES; FORKLIFT REPAIR PARTS for Nissan forklifts; WIDE mtd., S/N F5244U92. SELECTION OF WHEELABRATOR PARTS AND GOULD PUMP PARTS; SPROCKETS; ROLLER CHAIN; MECHANICAL COUPLINGS; AIR DRYERS PILLOW BLOCKS; BEARING BLOCKS; GALVANIZED AND PVC INGERSOLL-RAND PYRAMID 2000 REFRIGERATED, new 1987, Mdl. PIPE FITTINGS; SEAL TIGHT; LARGE QTY. OF UNUSED STEEL P201, 150 PSI max. pressure, 130 deg. max. inlet temp., S/N 872P4605. SHOT; WIDE SELECTION OF BALDOR, GENERAL ELECTRIC AND KAESER MDL. KLD1550 DESICCANT, new 1992, 1,550 SCFM @ 100 PSIG OTHER TOTALLY ENCLOSED FAN COOLED REPLACEMENT cap., S/N 3343-7-9211. MOTORS up to 100 HP, some new in box. DEL-MONOX MDL. DM400 DESICCANT, new 1992, 400 SCFM @ 100 PSIG HAND & POWER TOOLS cap., S/N 2292030472. SLEDGEHAMMERS; BLACKSMITH HAMMERS; TOOLBOXES; (2) 3,000 GAL. CAP. VERTICAL AIR RECEIVERS, inline filters, welded PNEUMATIC TIRED 24" X 48" TOOL CARTS w/various toolboxes; construction. WIRE BRUSHES; WELDING HAMMERS; FLASHLIGHTS; PIPE WRENCHES; C-CLAMPS; ENERPAC GEAR PULLER SET; CONDUIT PORTABLE OFFICE BUILDINGS BENDERS; WORKBENCHES; VISES; SHARP SHOOTER SHOVELS; (9) BETTER BUILT, Galvalume panel construction, entry door, multiple LISTA TOOL CABINET w/diagonal pliers, screwdrivers, pipe wrenches, windows, linoleum floor, window AC unit, dims: 14' x 24', 16' x 28', (2) 12' chain wrenches, combination wrenches, levels, squares, ratchets, handles, x 20', 12' x 14', and (4) 12' x 12'. hacksaws, scrapers, utility knives, needle nose pliers, drill indexers, hammers, chisels, sockets, impact sockets, regular sockets, crescent wrenches, sanders, pipe wrenches, twist drills, taper shanks, punches and dies for ironworkers, cast sets, bolt cutters and levels; (12) HEAVY DUTY 6" BENCH VISES w/fabricated steel stands; PRY BARS; PICKS; 4" AND 6" RIGHT ANGLE GRINDERS; CIRCULAR SAWS; INGERSOLL-RAND, SOUIX AND CENTRAL PNEUMATIC 1/2" AND 3/4" AIR IMPACT WRENCHES; DROP LIGHTS; KNAACK JOB BOXES w/internal trays.

KAESER DESICCANT (1 OF 2) QUINCY 1,500 CFM ROTARY AIR DRYER AIR COMPRESSORS

PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, ELECTROMOTIVE MDL. D004115 RAILROAD SWITCHER LOCOMOTIVE or go to our website at: www.pmi-auction.com. 7 PLANT & MACHINERY INC. Presorted AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE PUBLIC INVITED First Class Mail P.O. Box 19100 U.S. Postage Houston,TX 77224-9100 WEDNESDAY, DECEMBER 15 • 10:00 A.M. PAID Eugene, Oregon Permit No. 305 DATED MATERIAL – PLEASE DELIVER COMPLETE RAILCAR RENOVATION & REPAIR ATTENTION: PLANT MANAGER FACILITY OR EQUIPMENT BUYER Including: Ultra Late Model JBI Painting Facilities and Railcar Shot Blasting System; 2002 Grove 15 T. Carry Deck Crane; Heavy Fabricating Equipment; Late Model Welding Machines; (2) Kone Overhead Bridge Cranes, New 2004; Late Model Rough Terrain and Cushion Tire Forklifts; Air Compressors; Large Quantity of Hand and Power Tools; Material Handling Equipment; Much, Much More! AUCTION TEXARKANA ARKANSAS

DIRECTIONS FOR LODGING RAILROAD REPAIR FACILITY Holiday Inn ...... (870) 774-3521 2002 5100 N. State Line Avenue, Texarkana, Arkansas FROM DALLAS: Proceed East on Interstate 30 to Loop 245 South. Hampton Inn ...... (870) 774-4444 Proceed 2.6 miles to 19th Street (red light). Turn right on 19th Street 5300 N. State Line Avenue, Texarkana, Arkansas and proceed .2 mile to the 4-way stop sign. Turn right on Oats Street. The entrance to the plant will be straight ahead. Watch for auction signs. Courtyard ...... (903) 334-7400 5001 N. Cowhorn Creek Loop, Texarkana, Texas FROM LITTLE ROCK: Proceed West on Interstate 30 to Loop 245 La Quinta...... (903) 794-1900 < South. Proceed 2.6 miles to 19th Street (red light). Turn right on 19th 5201 N. State Line Avenue, Texarkana, Texas Street and proceed .2 mile to the 4-way stop sign. Turn right on Oats TOYOTA Street. The entrance to the plant will be straight ahead. Watch for 8,000 LB. auction signs. PROXY BIDS CAP. If you cannot attend this sale we will bid on your FORKLIFT FROM TEXARKANA AIRPORT: Proceed left on Hwy. 67 West. Proceed approx. 1.7 miles to 19th Street. Turn left on 19th Street and behalf. Contact Houston office at (713) 691-4401 proceed to 4-way stop sign. Turn left on Oats Street. The entrance to for instructions, or go to our website at: the plant will be straight ahead. Watch for auction signs. www.pmi-auction.com.

TERMS & CONDITIONS A 10% Buyer’s Premium will apply. Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH Everything will be sold to the highest bidder or bidders for cash in REMOVAL AT BUYER’S RISK AND EXPENSE.” accordance with the auctioneer’s Customary Terms of Sale, copies of which THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS will be posted on the premises. AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE TRANSFER OR COMPANY CHECK WITH BANK LETTER WHATSOEVER. GUARANTEEING PAYMENT TO PLANT & MACHINERY, INC. The buyer does hereby assume and does agree to indemnify and hold the auctioneer Here is an example of what your letter should be: Mr. ______harmless from any future claim which shall pertain to the fitness or use of that asset as being “Customer Name” is a customer of this bank. This bank will guarantee purchased. Riggers, movers, electricians and buyers performing work at the Auction Site unqualified payment to PMI on the account listed herein up to the amount must provide PMI with evidence of insurance. The insurance coverage must be at a level of $______. This letter is good until January 17, 2005. acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order In default of payment of bills in full within the time therein specified, the of the sale, accept bids from the seller, and group lots as it may deem appropriate. Auctioneer in addition to all other remedies allowed by law, may retain all Although all information has been obtained from sources deemed reliable, the monies received as deposit or otherwise, as liquidated damages. All items auctioneer and seller make no warranty or guarantee, expressed or implied, as to the must be removed by the time announced at the start of the sale. accuracy of the information herein contained, or contained in our catalog. It is for this reason Lots not paid for and/or removed within the time allowed may be resold at that buyers should avail themselves of the opportunity to make inspection prior to the public or private sale without further notice, and any deficiency, together auction. Although it is not likely, auction sales are subject to cancellation or postponement. with all expenses and charge of resale, will be charged to the defaulting Kindly contact auctioneer prior to attendance. purchaser. These terms and conditions may be modified or supplemented by language in the catalog The buyer acknowledges that he or an agent has inspected all of the assets available at the sale site or by announcement at the start of the sale. Bidders should be upon which he will be bidding and/or does purchase. attentive to those announcements and to the catalog language.

IP-4152972