DOCSLIB.ORG

International Registration Designating India Trade Marks Journal No: 1878 , 03/12/2018 Class 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
International Registration Designating India Trade Marks Journal No: 1878 , 03/12/2018 Class 1 International Registration designating India Trade Marks Journal No: 1878 , 03/12/2018 Class 1 3949355 11/05/2018 [International Registration No. : 1423131] MARKTEC Corporation 17-35, Omorinishi 4-chome, Ota-ku Tokyo 143-0015 Japan Proposed to be Used IR DIVISION Dye penetrant flaw detection materials. 5813 Trade Marks Journal No: 1878 , 03/12/2018 Class 1 4002637 08/08/2018 [International Registration No. : 1433709] TOSOH CORPORATION 4560, Kaisei-cho, Shunan-shi Yamaguchi 746-8501 Japan Proposed to be Used IR DIVISION Chemicals; unprocessed plastics. 5814 Trade Marks Journal No: 1878 , 03/12/2018 Class 1 Priority claimed from 07/08/2018; Application No. : 1946655 ;Australia 4002640 30/08/2018 [International Registration No. : 1433765] Iluka Resources Limited L23, 140 St Georges Tce PERTH WA 6000 Australia Proposed to be Used IR DIVISION Fire extinguishing chemicals; fire extinguishing compositions; fire protection compositions; fire retardant compositions; tanning substances (for hides or leather); adhesives for industrial purposes; polyester filler paste; mineral fillers for use in industry; adhesive fillers for filling surface blemishes; biological preparations (other than for medical or veterinary purposes); chemicals for use in industry; chemicals for use in photography; chemicals for use in science (other than for medical or veterinary use); chemicals for use in forestry, except fungicides, herbicides, insecticides and parasiticides; chemicals for use in horticulture (other than fungicides, weedkillers, herbicides, insecticides, parasiticides); unprocessed artificial resins; unprocessed plastics; tempering preparations; soldering preparations; compost; manures; fertilizers; chemicals used in agriculture. 5815 Trade Marks Journal No: 1878 , 03/12/2018 Class 1 Priority claimed from 27/03/2018; Application No. : 4440785 ;France 4002649 26/09/2018 [International Registration No. : 1434342] SEDERMA 29 rue du Chemin Vert F-78610 LE PERRAY EN YVELINES France Proposed to be Used IR DIVISION Chemical products intended to be used in personal care products; chemicals for use in cosmetic, pharmaceutical, nutritional compositions; chemical ingredients for the manufacture of cosmetic products; chemical ingredients for the manufacture of personal care products; biochemical raw materials for use in the manufacture of cosmetics, personal care products, pharmaceuticals, nutritional products; biochemical active ingredients of plant or synthetic origin for use in the manufacture of cosmetics, personal care products, pharmaceuticals, nutritional products; peptides for use in the manufacture of cosmetic products, personal care products, pharmaceutical products, nutritional products. 5816 Trade Marks Journal No: 1878 , 03/12/2018 Class 1 4004515 10/08/2018 [International Registration No. : 1434468] Hubei Sanding Technology Co., Ltd. Wangpu village, Zhaoshan town, Liangzi Lake district, Ezhou city Hubei province China Proposed to be Used IR DIVISION Bentonite; flocculants; chemical intensifiers for paper; size for use in the textile industry; disincrustants; purification preparations; emulsifiers; industrial chemicals. 5817 Trade Marks Journal No: 1878 , 03/12/2018 Class 2 3940493 20/06/2018 [International Registration No. : 1421131] DYNAMIC COLOR INC. PO Box 21083, FT. Lauderdale FL 33335 United States of America Proposed to be Used IR DIVISION Tattoo color pigments; tattoo colors. 5818 Trade Marks Journal No: 1878 , 03/12/2018 Class 2 4004461 08/10/2018 [International Registration No. : 1310669] SAMHWA PAINTS IND. CO., LTD. (Seonggok-dong), 178, Byeolmang-ro, Danwon-gu, Ansan-city Gyeonggi-do Republic of Korea Proposed to be Used IR DIVISION Paints; pigments; dyestuffs; protective preparations for metals; wood preservatives; wood mordants; mordants for leather; natural resins [raw]. 5819 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 3539553 26/12/2016 [International Registration No. : 1341402] HOYU KABUSHIKI KAISHA (ALSO TRADING AS HOYU CO., LTD.) 501, Tokugawa 1-Chome, Higashi-Ku, Nagoya-Shi Aichi-Ken 461-8650 Japan Address for service in India/Attorney address: REMFRY AND SAGAR REMFRY HOUSE AT THE MILLENNIUM PLAZA, SECTOR 27, GURGAON 122 009, NEW DELHI, NATIONAL CAPITAL REGION Proposed to be Used IR DIVISION Hair coloring preparations; hair dyes; hair mascara; hair color treatment preparations; hair creams; hair lotions; hair sprays; hair treatment preparations; hair conditioner; bleaching preparations for hair; color-removing preparations for hair; cosmetic hair care preparations; hair waving preparations; hair treatment cream; hair tonic; cosmetics for hair; cosmetics; hair shampoo; soaps. 5820 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 3556031 10/02/2017 [International Registration No. : 1344825] NONTOXIC CERTIFIED, INC. P.O. Box 65 Irvington NY 10533 United States of America Address for service in India/Attorney address: SAIKRISHNA & ASSOCIATES B-140, SEC-51, NOIDA-201301 Proposed to be Used IR DIVISION Personal care products. 5821 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 Priority claimed from 13/04/2017; Application No. : 30 2017 009 463 ;Germany 3665698 20/05/2017 [International Registration No. : 1371460] BEIERSDORF AG Unnastrasse 48 20253 Hamburg Germany Address for service in India/Attorney address: D.P.AHUJA & CO. 14/2 PALM AVENUE CALCUTTA- 700 019 Proposed to be Used IR DIVISION Body and beauty care preparations for cosmetic purposes. 5822 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 3687424 05/09/2016 [International Registration No. : 1376539] MY BEAUTY BRAND LIMITED C/O Leigh Saxton Green Llp, Mutual House, 70 Conduit Street London W1S 2GF United Kingdom Address for service in India/Attorney address: SAI & MEHTA G-23/186, SECTOR-7, ROHINI, N. DELHI-85. Proposed to be Used IR DIVISION Cosmetics; mascara; eye make-up and cosmetics for eyelashes, essential oils, soaps, hair lotions, perfumery, beauty products. 5823 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 3953621 22/08/2018 [International Registration No. : 1423519] Shipman Associates, LLC 1000 Atlantic Ave Suite 100 Alameda CA 94501 United States of America Proposed to be Used IR DIVISION Cosmetics. 5824 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 3995261 12/02/2018 [International Registration No. : 1432233] Andson B2B Intertrade Co.,Ltd Room 1205,No.825 Hubin South Road, Siming District, Xiamen Fujian China Proposed to be Used IR DIVISION Essential oils; extracts of flowers [perfumes]; bases for flower perfumes; oils for perfumes and scents; aromatics [essential oils]; cosmetics; perfumes; scented wood; incense; potpourris [fragrances]. 5825 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 4002496 12/09/2018 [International Registration No. : 1433734] L'OREAL 14 rue Royale F-75008 PARIS France Proposed to be Used IR DIVISION Cosmetic products. 5826 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 4004450 10/08/2018 [International Registration No. : 1434268] ZHENGZHOU XINXINYUAN TRADING CO., LTD. 2nd Floor (West), Unit 3, No.8 Building, Lvdao Harbour, No.51 Jingguangnan Road, Erqi District, Zhengzhou City Henan Province China Proposed to be Used IR DIVISION Hair lotions; essential oils; cosmetics; dentifrices; cosmetics for animals; shining preparations [polish]. 5827 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 Priority claimed from 28/02/2018; Application No. : 4432961 ;France 4004508 27/08/2018 [International Registration No. : 1434378] DERMWAY PARIS 34 avenue des Champs Elysées F-75008 PARIS France Proposed to be Used IR DIVISION Cosmetic products in the form of creams, emulsions, lotions, milks, gels and oils for skin care (for the hands, face, feet and body); beauty masks (excluding products for surface abrasion of the skin by chemical means); powders for application after bathing, powders for personal hygiene; perfumes, toilet water and eau de Cologne; bath and/or shower preparations (salts, foams, oils, gels) not for medical use; make-up and make-up removing products for the face and eyes; cosmetic products for application on the lips; cosmetic products for nail care and make-up; cosmetic preparations for protecting the skin from the sun; cosmetic preparations for application after exposure to the sun; cosmetic preparations for skin-tanning without exposure to the sun; cosmetic preparations for whitening the skin; cosmetic preparations for preventing wrinkles. 5828 Trade Marks Journal No: 1878 , 03/12/2018 Class 3 4004511 29/06/2018 [International Registration No. : 1434473] Thomas Brunner Göppinger Str. 47 73278 Schlierbach Teck Germany Proposed to be Used IR DIVISION Bleaching preparations and other substances for laundry use; cleaning, polishing, scouring and abrasive preparations; soaps; perfumery, essential oils, cosmetics, hair lotions; dentifrices; abrasive cloth; abrasive paper; adhesives for affixing false eyelashes; adhesives for affixing false hair; adhesives for cosmetic purposes; antiperspirants [toiletries]; antistatic preparations for household purposes; cobbler's wax; cotton sticks for cosmetic purposes; cotton wool for cosmetic purposes; decorative transfers for cosmetic purposes; denture polishes; emery paper; emery cloth; false eyelashes; false nails; fumigation preparations [perfumes]; glass cloth; glass paper; incense; lacquer-removing preparations; mouth washes, not for medical purposes; paint stripping preparations; polishing paper; potpourris [fragrances]; pumice stone; sachets for perfuming linen; sandpaper; scented wood; shampoos; shampoos for pets; shoemakers' wax; smoothing stones; swabs [toiletries];
Load more

Recommended publications
  • The Significance of the Automobile in 20Th C. American Short Fiction
    Georgia Southern University Digital Commons@Georgia Southern Electronic Theses and Dissertations Graduate Studies, Jack N. Averitt College of Spring 2021 The Significance of the Automobile in 20th .C American Short Fiction Megan M. Flanery Follow this and additional works at: https://digitalcommons.georgiasouthern.edu/etd Part of the African American Studies Commons, American Literature Commons, American Material Culture Commons, American Popular Culture Commons, and the United States History Commons Recommended Citation Flanery, Megan M., "The Significance of the Automobile in 20th .C American Short Fiction" (2021). Electronic Theses and Dissertations. 2220. https://digitalcommons.georgiasouthern.edu/etd/2220 This thesis (open access) is brought to you for free and open access by the Graduate Studies, Jack N. Averitt College of at Digital Commons@Georgia Southern. It has been accepted for inclusion in Electronic Theses and Dissertations by an authorized administrator of Digital Commons@Georgia Southern. For more information, please contact [email protected]. THE SIGNIFICANCE OF THE AUTOMOBILE IN 20TH C. AMERICAN SHORT FICTION by MEGAN M. FLANERY ABSTRACT Midcentury American life featured a post-war economy that established a middle class in which disposable income and time for leisure were commonplace. In this socio-economic environment, consumerism flourished, ushering in the Golden Age of the automobile: from 1950 to 1960, Americans spent more time in their automobiles than ever before, and, by the end of the decade, the number of cars on the road had more than doubled. While much critical attention has been given to the role of the automobile in American novels, less has been given to its role in American short stories.
    [Show full text]
  • On the Improvement Measures of Interior Noise Reduction of Minivan's
    2560. On the improvement measures of interior noise reduction of minivan’s roof based on acoustic modal analysis Yici Li1, Lin Hua2, Fengxiang Xu3 Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan 430070, China 2, 3Corresponding authors E-mail: [email protected], [email protected], [email protected] Received 17 November 2016; received in revised form 23 April 2017; accepted 6 May 2017 DOI https://doi.org/10.21595/jve.2017.18030 Abstract. In this work, three types of measures, i.e., 1) adding the damping adhesive, 2) changing the local beads and 3) utilizing the dynamic vibration absorber (DVA), are performed to investigate and improve the acoustic quality of the minivan’s interior noise. For adding the damping adhesive, the difference of the adhesive location directly affects the mode of minivan’s roof. For changing the local beads, eight cases of beads are selected. The results indicate that the change trend of the first natural frequency is parabolic as the number of beads increases. For adding the 33 Hz DVA, the results show that the sound pressure levels (SPLs) of the minivan’s response points located at the front, middle and rear seat in the critical frequency are approximately reduced by 2.1 dB, 1.5 dB and 1.1 dB in the minivan’s simulation, and by 2.6 dB(A), 1.4 dB(A) and 2.7 dB(A) in the minivan’s road experiment, respectively.
    [Show full text]
  • United States District Court District of Maine Caryl E
    Case 1:06-cv-00069-JAW Document 97 Filed 03/28/08 Page 1 of 25 PageID #: 1123 UNITED STATES DISTRICT COURT DISTRICT OF MAINE CARYL E. TAYLOR, individually and ) as personal representative of the estate of ) MARK E. TAYLOR, ) ) Plaintiff ) ) v. ) Civ. No. 06-69-B-W ) FORD MOTOR COMPANY, ) ) Defendant ) RECOMMENDED DECISION ON DEFENDANT'S MOTION FOR SUMMARY JUDGMENT Caryl Taylor contends that her deceased husband's 2002 Ford F-250 Super Cab pickup truck was defectively designed and that her husband would likely have survived a roll-over event but for alleged defects in the roof and door assemblies. Ms. Taylor never designated a automotive engineer or other design expert to support her claim of design defect. Ford Motor Company argues that this omission calls for judgment in its favor as a matter law and has filed a motion for summary judgment to that effect (Doc. No. 43). The Court referred the motion to me for a recommended decision and based on my review I recommend that the Court grant the motion, in part, based on certain concessions made by Taylor, but not as to the chief contention Ford makes with respect to the need for Taylor to have her own design expert. Facts The following facts are material to the summary judgment motion. They are drawn from the parties' statements of material facts in accordance with Local Rule 56. See Doe v. Solvay Case 1:06-cv-00069-JAW Document 97 Filed 03/28/08 Page 2 of 25 PageID #: 1124 Pharms., Inc., 350 F. Supp.
    [Show full text]
  • Advanced Multimaterial Concept of Automobile Roof Review Paper
    International Journal of Science Technology & Management www.ijstm.com Volume No.04, Special Issue No.01, February 2015 ISSN (Print) 2394-1529, (Online) 2394-1537 ADVANCED MULTIMATERIAL CONCEPT OF AUTOMOBILE ROOF REVIEW PAPER Kamesh.A.Patil1, Prof.VidhyadharKshirsagar2, Rahul Chakule3 1,2,3Department of Mechanical Engineering, Wainganga College of Engineering & Management,Nagpur University, Nagpur441114, (India) ABSTRACT Today’s main aim of each automobile manufacturing company is to built a vehicle which is entirely with a new fusion of technology, engineering and design, for that they focused on light weight design, crashworthiness, fuel consumptions & thermal comfort of car. This all facts are mainly depend on the materials which are used to make a different components of a vehicle including power driven system & automotive body.Automotive body covers approx. 40% of total weight of automotive vehicle. This paper gives an overview on different materials which are used to built automobile body. Mainly paper concentrate on automobile roof which covers approx. 2% weight of total automotive body. A multi-material lightweight vehicle (MMLV) concept that uses advanced material solutions to achieve a nearly 25% weight reduction compared to the current production vehicle. Multimaterial concept also facilitating an extensive use of advanced lightweight and high-strength materials, resulting in environmental and fuel economy benefits. Keywords: Advance Vehicle Concept, Historical development of automobile body, Lightweight Metal , Material Properties, Multidisciplinary design optimization I INTRODUCTION The entire automobile industry is under considerable pressure on increasing customer demands in terms of safety, luxuriousness and performance. The trends lead to fully equipped cars in all classes getting more luxurious and comfortable.
    [Show full text]
  • Automobile Aerodynamics Influenced by Airfoil-Shaped Rear Wing
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by FAMENA Repository International Journal of Automotive Technology, Vol. 17, No. 3, pp. 377−385 (2016) Copyright © 2016 KSAE/ 090−03 DOI 10.1007/s12239−016−0039−4 pISSN 1229−9138/ eISSN 1976−3832 AUTOMOBILE AERODYNAMICS INFLUENCED BY AIRFOIL-SHAPED REAR WING A. BULJAC, I. DŽIJAN, I. KORADE, S. KRIZMANIĆ and H. KOZMAR* Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10000 Zagreb, Croatia (Received 3 March 2015; Revised 4 September 2015; Accepted 29 November 2015) ABSTRACT−Computational model is developed to analyze aerodynamic loads and flow characteristics for an automobile, when the rear wing is placed above the trunk of the vehicle. The focus is on effects of the rear wing height that is investigated in four different positions. The relative wind incidence angle of the rear wing is equal in all configurations. Hence, the discrepancies in the results are only due to an influence of the rear wing position. Computations are performed by using the Reynolds-averaged Navier-Stokes equations along with the standard k-ε turbulence model and standard wall functions assuming the steady viscous fluid flow. While the lift force is positive (upforce) for the automobile without the rear wing, negative lift force (downforce) is obtained for all configurations with the rear wing in place. At the same time, the rear wing increases the automobile drag that is not favorable with respect to the automobile fuel consumption. However, this drawback is not that significant, as the rear wing considerably benefits the automobile traction and stability.
    [Show full text]
  • Conformal Automotive Roof-Top Antenna Cavity with Increased
    This article has been accepted for publication in a future issue of this journal, but has not been fully edited. Content may change prior to final publication. Citation information: DOI 10.1109/LAWP.2018.2876628, IEEE Antennas and Wireless Propagation Letters JOURNAL OF LATEX CLASS FILES, VOL. 14, NO. 8, AUGUST 2015 1 Conformal Automotive Roof-Top Antenna Cavity With Increased Coverage to Vulnerable Road Users Gerald Artner, Member, IEEE, Wim Kotterman, Giovanni Del Galdo, Member, IEEE, and Matthias A. Hein, Senior Member, IEEE, Abstract—Cooperatively driving cars benefit from increased coverage towards driving direction for communication with 150 vulnerable road users. Antenna cavities were designed, proto- 500 typed and measured for integration into car roofs above the 570 windshield. Two different antenna cavities were investigated. First, an antenna cavity made from carbon fiber reinforced polymer was measured without a vehicle, to obtain general results 185 without model specific influence. Second, a metal cavity was built into the roof of a sedan type passenger car to include the marked effects of the car body and provide a proof of performance. Gain Fig. 1. Sketch of a chassis antenna cavity above the windshield on a sedan patterns were measured in anechoic chambers. Results show that type vehicle. Dimensions are in millimeters. the antenna structure and mounting position are suitable for omnidirectional radiation with increased radiation towards low elevation angles in driving direction. be combined with model variations such as sunroofs and Index Terms—antenna, cavity, conformal, automotive, vehicu- lar, windshield, CFRP panorama roofs. A front position is also closer to the control electronics (shorter cables).
    [Show full text]
  • Requirements for Vehicles for Off Road Racing Events
    Requirements for Vehicles for Off Road Racing Events © 2021 Australian Auto-Sport Alliance (AASA) Version 1.7 Australian Auto-Sport Alliance (AASA) AASA House 41 Fox Street, Winton, VIC 3673 www.aasa.com.au ABN: 12 117 743 423 Telephone: 03 5721 7800 [email protected] 1 OFF ROAD RACING VEHICLE General Requirements – GRO The following Regulations are adjunct to the AASA General Requirements for Vehicles (GRA). They list additional requirements beyond the GRA that are specific to vehicles competing in Off Road Racing events. Where an item shown on an Individual Recognition Document (IRD) issued by the AASA for a specific vehicle is in conflict with either the GRA or GRO, then that specific IRD specification will take priority. 1. Each automobile must be equipped with a firewall that effectively shields the occupants from hazards associated with the derangement or malfunction of the engine and gearbox. A water-cooling radiator mounted behind and above the level of the driver’s shoulders will be regarded as contributing to an effective shield. 2. Each automobile, other than those retaining a series production floor pan, must be equipped with bodywork which prevents any “line of sight” entry of foreign matter into the habitacle up to approximately the level of the driver’s shoulder. For panels fitted to the floor of the habitacle, the material required shall be either mild steel of minimum thickness 1.6mm or aluminium alloy of minimum thickness 2.0mm. Attention should be paid to the strength and impact resistance of the material used for the remaining bodywork.
    [Show full text]
  • Sunroof Arrangement Including Assembly Method Schiebedachanordnung Einschliesslich Montageverfahren Agencement D’Un Toit Ouvrant Y Compris Méthode D’Assemblage
    (19) TZZ _____T (11) EP 2 511 117 B1 (12) EUROPEAN PATENT SPECIFICATION (45) Date of publication and mention (51) Int Cl.: of the grant of the patent: B60J 7/02 (2006.01) B60J 10/00 (2016.01) 29.03.2017 Bulletin 2017/13 (21) Application number: 11162247.8 (22) Date of filing: 13.04.2011 (54) Sunroof arrangement including assembly method Schiebedachanordnung einschliesslich Montageverfahren Agencement d’un toit ouvrant y compris méthode d’assemblage (84) Designated Contracting States: (72) Inventor: Dryselius, Joakim AL AT BE BG CH CY CZ DE DK EE ES FI FR GB 42167, Västra Frölunda (SE) GR HR HU IE IS IT LI LT LU LV MC MK MT NL NO PL PT RO RS SE SI SK SM TR (74) Representative: Volvo Car Corporation 405 31 Göteborg (SE) (43) Date of publication of application: 17.10.2012 Bulletin 2012/42 (56) References cited: EP-A1- 2 020 323 EP-A2- 2 042 361 (73) Proprietor: Volvo Car Corporation DE-A1- 19 732 700 DE-A1- 19 810 839 40 531 Göteborg (SE) DE-B3- 10 326 433 US-A1- 2010 038 933 Note: Within nine months of the publication of the mention of the grant of the European patent in the European Patent Bulletin, any person may give notice to the European Patent Office of opposition to that patent, in accordance with the Implementing Regulations. Notice of opposition shall not be deemed to have been filed until the opposition fee has been paid. (Art. 99(1) European Patent Convention). EP 2 511 117 B1 Printed by Jouve, 75001 PARIS (FR) 1 EP 2 511 117 B1 2 Description tilt to vent and slide open above the roof, requiring little headroom or roof length.
    [Show full text]
  • The Manufacturer's Duty in Second Collision Automobile Product Liability Cases
    Duquesne Law Review Volume 12 Number 3 Article 12 1974 The Manufacturer's Duty in Second Collision Automobile Product Liability Cases Joel M. Dresbold Follow this and additional works at: https://dsc.duq.edu/dlr Part of the Law Commons Recommended Citation Joel M. Dresbold, The Manufacturer's Duty in Second Collision Automobile Product Liability Cases, 12 Duq. L. Rev. 603 (1974). Available at: https://dsc.duq.edu/dlr/vol12/iss3/12 This Comment is brought to you for free and open access by Duquesne Scholarship Collection. It has been accepted for inclusion in Duquesne Law Review by an authorized editor of Duquesne Scholarship Collection. The Manufacturer's Duty in "Second Collision" Automobile Product Liability Cases INTRODUCTION Automobile manufacturers have long been subject to liability for damages caused by a defect in their product which contributes to an accident or collision. In MacPherson v. Buick Motor Co.,' the court ruled that an automobile manufacturer whose defective wooden steer- ing wheel collapsed and caused an accident was liable for its negligence in building the wheel and failing to inspect it, not only to the buyer of the automobile, but also to others who may foreseeably be injured by 2 the negligence of the manufacturer. Davlin v. Henry Ford & Sons recognized the duty of a tractor manufacturer "to use reasonable care in employing designs, selecting materials, and making assemblies, in the construction of a tractor, which would fairly meet any emergency of use which could.reasonably be anticipated,"8 but the case found that the plaintiff had not met his burden of proof in proving that the tractor seat broke because of the manufacturer's negligence.
    [Show full text]
  • AUTOMATED VEHICLES: LIABILITY CRASH COURSE MCITY—AFFILIATE LAW RESEARCH PROGRAM March 2018 Brian Westenberg Kristin Kolodge Miller Canfield J.D
    AUTOMATED VEHICLES: LIABILITY CRASH COURSE MCITY—AFFILIATE LAW RESEARCH PROGRAM March 2018 Brian Westenberg Kristin Kolodge Miller Canfield J.D. Power Troy, MI Troy, MI [email protected] [email protected] Tina Georgieva Lisa Boor Miller Canfield J.D. Power Troy, MI Troy, MI [email protected] [email protected] Copyright © 2018 by J.D. Power and Miller Canfield. All Rights Reserved. Reproduction Prohibited. The information contained herein has been obtained by J.D. Power and Miller Canfield from sources believed to be reliable. However, because of the possibility of human or mechanical error by our sources, J.D. Power and Miller Canfield does not guarantee the accuracy, adequacy, or completeness of any information and is not responsible for any errors or omissions or for the results obtained from use of such information. This material is the property of J.D. Power and Miller Canfield or is licensed to J.D. Power and Miller Canfield. This material may only be reproduced, transmitted, excerpted, distributed or commingled with other information, with the express written permission of J.D. Power and Miller Canfield. The user of this material shall not edit, modify, or alter any portion. Advertising claims cannot be based on information published in this special report. ii Copyright © 2018 by J.D. Power and Miller Canfield. All Rights Reserved. AUTOMATED VEHICLES: LIABILITY CRASH COURSE TABLE OF CONTENTS I. EXECUTIVE SUMMARY 4 II. INTRODUCTION 6 III. WHY IS IN RE TOYOTA MOTOR CORP. UNINTENDED ACCELERATION IMPORTANT? 8 IV. THE BASELINE ON LIABILITY: A PRIMER ON U.S. PRODUCT LIABILITY LAW 14 A.
    [Show full text]
  • Jere Beasley Report Highway and Auto Safety, the Owner/Oper- Ments of Commercial Motor Vehicles and (December 2016)
    MARCH 2 017 Distributed to over 40,000 subscribers each month BeasleyAllen.com I. As a result of the cab guard litigation Generation One car owners have an handled by our firm, two of the compa- option of a buy back is due to VW admit- CAPITOL nies making the cab guards have made sig- ting they are not able to “fix” the Genera- OBSERVATIONS nificant safety-related changes. Those tion One vehicles. guard manufacturers now say on their VW is unsure whether they will be able websites that cab guards should not be to “fix” the remaining 60,000 vehicles in used as safety devices on log trucks. In the Generation Two category; therefore, CAB GUARD LITIGATION PROMPTS WARNING fact, when clicking on “cab guard” on one VW has until fall 2017 to discover a “fix” LABELS ON PRODUCTS company’s website, a warning box for these vehicles. If an emissions fix is If “heavy truck cab guard” is searched appears stating the device will not prevent found, VW will implement it on all Gener- on Google, more than 1.5 million results serious injury or death. The company now ation Two vehicles, and the owners will appear. And, at least on the first page, says that the cab guards are not to be used receive cash compensation of $7,037 to none of those results will tell you that on log trucks. The warnings are a $16,114. If VW does not discover a “fix” by many of them—if not most—do not work, welcome step in the right direction for fall 2017, owners will have the option to although a majority of trucks on the road protecting unsuspecting log truck drivers sell their cars back to VW.
    [Show full text]
  • Oversight on Passenger Vehicle Roof Strength
    S. HRG. 110–1161 OVERSIGHT ON PASSENGER VEHICLE ROOF STRENGTH HEARING BEFORE THE SUBCOMMITTEE ON CONSUMER AFFAIRS, INSURANCE, AND AUTOMOTIVE SAFETY OF THE COMMITTEE ON COMMERCE, SCIENCE, AND TRANSPORTATION UNITED STATES SENATE ONE HUNDRED TENTH CONGRESS SECOND SESSION JUNE 4, 2008 Printed for the use of the Committee on Commerce, Science, and Transportation ( U.S. GOVERNMENT PRINTING OFFICE 75–609 PDF WASHINGTON : 2012 For sale by the Superintendent of Documents, U.S. Government Printing Office Internet: bookstore.gpo.gov Phone: toll free (866) 512–1800; DC area (202) 512–1800 Fax: (202) 512–2104 Mail: Stop IDCC, Washington, DC 20402–0001 VerDate Nov 24 2008 11:24 Aug 23, 2012 Jkt 000000 PO 00000 Frm 00001 Fmt 5011 Sfmt 5011 S:\GPO\DOCS\75609.TXT JACKIE SENATE COMMITTEE ON COMMERCE, SCIENCE, AND TRANSPORTATION ONE HUNDRED TENTH CONGRESS SECOND SESSION DANIEL K. INOUYE, Hawaii, Chairman JOHN D. ROCKEFELLER IV, West Virginia TED STEVENS, Alaska, Vice Chairman JOHN F. KERRY, Massachusetts JOHN MCCAIN, Arizona BYRON L. DORGAN, North Dakota KAY BAILEY HUTCHISON, Texas BARBARA BOXER, California OLYMPIA J. SNOWE, Maine BILL NELSON, Florida GORDON H. SMITH, Oregon MARIA CANTWELL, Washington JOHN ENSIGN, Nevada FRANK R. LAUTENBERG, New Jersey JOHN E. SUNUNU, New Hampshire MARK PRYOR, Arkansas JIM DEMINT, South Carolina THOMAS R. CARPER, Delaware DAVID VITTER, Louisiana CLAIRE MCCASKILL, Missouri JOHN THUNE, South Dakota AMY KLOBUCHAR, Minnesota ROGER F. WICKER, Mississippi MARGARET L. CUMMISKY, Democratic Staff Director and Chief Counsel LILA HARPER HELMS, Democratic Deputy Staff Director and Policy Director CHRISTINE D. KURTH, Republican Staff Director, and General Counsel PAUL NAGLE, Republican Chief Counsel SUBCOMMITTEE ON CONSUMER AFFAIRS, INSURANCE, AND AUTOMOTIVE SAFETY MARK PRYOR, Arkansas, Chairman JOHN E.
    [Show full text]