DOCSLIB.ORG

Eaton SPD, Power Confitioning, Power Factor Capacitors

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Eaton SPD, Power Confitioning, Power Factor Capacitors SPD, Power Conditioning, PF Capacitors and Harmonic Filters Industrial Surge Protection Products 2.1 Surge Protection and Power Conditioning 2 Introduction . V3-T2-2 Product Overview . V3-T2-5 2 SPD Series for Integration into Electrical Distribution Equipment. V3-T2-7 SPD Series for Mounting External to Electrical Distribution Equipment V3-T2-11 2 SPD MAX Series Surge Protection . V3-T2-16 2 SPC Surge Protective Device . V3-T2-20 CVX050/100. V3-T2-24 2 SP1 Surge Protective Device. V3-T2-27 SP2 Surge Protective Device. V3-T2-29 2 AEGIS Powerline Filters. V3-T2-31 2 Sag Ride-Through (SRT2). V3-T2-36 Power-Sure 700 (T700) . V3-T2-40 2 Power-Sure 800 (T800) . V3-T2-42 2 Power-Suppress 100 (T100) . V3-T2-46 2.2 Power Factor Correction and Harmonic Filtering 2 Product Overview . V3-T2-49 2 UNIPUMP . V3-T2-51 UNIPAK . V3-T2-54 2 AUTOVAR 300 Automatic Power Factor Correction Capacitor Systems . V3-T2-63 2 AUTOVAR 600 Automatic Power Factor Correction Capacitor Systems . V3-T2-67 2 AUTOVAR Filter—LV Automatic Detuned Filter . V3-T2-74 Transient-Free Static Switching Power Factor Correction Units . V3-T2-81 2 HCU2 Harmonic Correction Unit . V3-T2-83 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Volume 3—Power Distribution and Control Assemblies CA08100004E—December 2018 www.eaton.com V3-T2-1 Revision notes Volume 3—Power Distribution and Control Assemblies, CA08100004E Tab 2—SPD, Power Conditioning, PF Capacitors and Harmonic Filters Revision date Section Change page(s) Description 12/12/18 2.1 V3-T2-27 Content edits 12/12/18 2.1 V3-T2-33–V3-T2-36 Content edits 12/12/18 2.1 V3-T2-40–V3-T2-48 Content edits SPD, Power Conditioning, PF Capacitors and Harmonic Filters 2.1 Surge Protection and Power Conditioning 2 Industrial and Commercial Surge Protection Contents Description Page 2 Introduction Product Overview . V3-T2-5 2 SPD Series for Integration into Electrical Distribution Equipment . V3-T2-7 2 SPD Series for Mounting External to Electrical Distribution Equipment . V3-T2-11 2 SPD MAX Series Surge Protection . V3-T2-16 SPC Surge Protective Device . V3-T2-20 2 CVX050/100. V3-T2-24 SP1 Surge Protective Device. V3-T2-27 2 SP2 Surge Protective Device. V3-T2-29 AEGIS Powerline Filters. V3-T2-31 2 Sag Ride-Through (SRT2). V3-T2-36 Power-Sure 700 (T700) . V3-T2-40 Power-Sure 800 (T800) . V3-T2-42 2 Power-Suppress 100 (T100) . V3-T2-46 2 2 Introduction 2 Industrial and Commercial Surge Protection Critical Load Protection Commercial and Light ● SPD Series for Integration SPD Series Sidemount Units Series filtering and surge Industrial Surge Protection 2 into Electrical Distribution Specification grade surge protection for critical single- The SPC Series offers robust Equipment protective devices for phase loads. protection in a compact, ● SPD Series for Mounting installation external to flexible design and is 2 ● Current ratings up to 60 A External to Electrical electrical distribution configurable for a wide range ● 2 Distribution Equipment equipment. 120 and 240 Vac units of commercial and light ● 24 and 48 Vdc units industrial applications. 2 SPD Series Integrated Units ● DIN mounting available on The SPC combines surge Specification grade surge some models suppression components protective devices installed ● Up to 80 kA of peak surge and the options of EMI/RFI 2 within Eaton’s electrical protection filtering, Form C contacts and an audible alarm. assemblies. ● AC units are UL 1449 4th 2 Edition and UL 1283 7th Surges (also known as Edition listed transients), due to lightning, 2 utility grid switching, switching of external/internal 2 inductive or capacitive loads, and other sources, travel on 2 power line conductors throughout the electrical distribution system, causing 2 SPD Series Sidemount Unit system operating problems 2 and equipment downtime. 2 2 2 2 SPD Series Integrated Unit 2 SPC Series 2 AEGIS Products 2 V3-T2-2 Volume 3—Power Distribution and Control Assemblies CA08100004E—December 2018 www.eaton.com SPD, Power Conditioning, PF Capacitors and Harmonic Filters Surge Protection and Power Conditioning 2.1 Surge Protection for Sub-Panel and OEM Applications 2 In today’s business Panelboards with Integrated environment that calls for 24 Surge Protective Devices 2 hours a day, 7 days a week ● Available in standard and uptime and reliability, Eaton’s custom configurations CVX050 and CVX100 surge ● Ratings: 2 protective devices (SPDs) ● 120/240 Vac, single- ensure that a customer’s phase, three-wire 2 investment in equipment and processes is protected from ● 208Y/120 Vac, three- 2 the damaging effects of phase, four-wire voltage transients. Designed ● 480Y/277 Vac, three- for installation on service phase, four-wire Surge Protective Devices can be 2 Integrated within a variety of Eaton entrance, branch panels or ● 600Y/347 Vac, three- Electrical Assemblies individual equipment phase, four-wire (other 2 disconnects, the CVX050/100 voltage configurations provides enhanced surge are available) 2 protection for mission-critical applications. ● Copper bus 2 ● 12, 18, 24, 30, 36 and 42 circuits ● Bolt-on branch breakers 2 ● A full range of factory installed modifications 2 and accessories ● Fully rated or series rated 2 2 Power Conditioning 2 Sag Ride-Through (SRT2) Power-Sure 700 (T700) 2 The sag ride-through (SRT2) The Power-Sure 700 (T700) is is a power conditioner that designed to meet the needs 2 corrects voltage sags to of customers who experience maintain uptime and voltage regulation problems productivity. due to brownout conditions 2 from their electric utilities. 2 2 2 2 2 Sag Ride-Through (SRT2) Power-Sure 700 (T700) 2 2 Facility-Wide Power Protection Solutions A facility-wide protection The most accepted design methodology is based on two concepts: 2 approach should be employed to address power 1. Ensure proper grounding conditions exist. 2. Surge protection should be installed 2 quality issues. This approach All forms of power protection/conditioning at key distribution panels and minimizes overall lifecycle rely on good grounding, bonding and critical loads. 2 costs and optimizes facility earthing practices. uptime. The following is a 2 recommended design approach for implementing facility-wide Eaton power 2 protection solutions. 2 Volume 3—Power Distribution and Control Assemblies CA08100004E—December 2018 www.eaton.com V3-T2-3 SPD, Power Conditioning, PF Capacitors and Harmonic Filters 2.1 Surge Protection and Power Conditioning 2 Application Description 2 Application Recommendations for Surge Products 2 Application Type Eaton’s Surge Product Features and Competitive Advantages Light Commercial 2 Design build SPD Series integrated units Ideal package for any commercial facility Chain stores SPD Series sidemount units Cost-effective, reliable protection using the SPD Series or SPC units 2 Small facilities SPC units CVX units 2 SP1 units 2 Large Projects Including: SPD Series integrated units in panelboards, switchboards, Able to meet competitors’ surge protection specifications 2 Commercial MCCs, switchgear, busway and automatic transfer switches Increased surge protection performance by using integrated SPD Series units Government SPD Series sidemount units Wall space savings by using integrated SPD Series units 2 Schools SPD MAX units Quick-ship capabilities from Eaton assembly satellites and service centers Institution AEGIS units for critical load applications Power conditioning capability for a wide variety of applications 2 Military Power conditioners (T700, T800 and T100 and SRT2 units) Industrial 2 Including: SPD Series integrated units in panelboards, switchboards, Increased surge protection performance by using integrated SPD Series units Small and large facilities MCCs, switchgear, busway and automatic transfer switches Wall space savings by using integrated SPD Series units 2 WWTP SPD Series sidemount units MCCs with SPD Series units installed protect drives from damage SPD MAX units AEGIS products protect expensive critical loads from harmful damage AEGIS units for critical load applications such as PLCs, T700 and T800 units correct voltage regulation problems 2 robotics applications, etc. SRT2 units correct voltage sag problems 2 Power conditioners (T700, T800 and T100 and SRT2 units) OEM 2 Any OEM customer including: SPD Series integrated units Years of experience in a variety of OEM applications Integrators SPD Series sidemount units Application assistance and recommendations 2 Medical equipment CVX units Small footprint enables integration in a variety of applications SPC units Ability to meet customized requirements 2 Automation and control SP1 units SP2 units 2 AEGIS units for critical load applications Telecommunications 2 Including: Panelboards and automatic transfer switches with integrated SPD Series units Ability to meet customized requirements Cellular sites SPD Series sidemount units Application assistance and recommendations 2 Microwave CVX units SPC units 2 PCS SP1 units 2 Paging systems SP2 units 2 2 2 2 2 2 2 2 V3-T2-4 Volume 3—Power Distribution and Control Assemblies CA08100004E—December 2018 www.eaton.com SPD, Power Conditioning, PF Capacitors and Harmonic Filters Surge Protection and Power Conditioning 2.1 SPD Series Sidemount Units Contents 2 Description Page Introduction . V3-T2-2 2 Product Overview SPD Series for Integration into Electrical 2 Distribution Equipment . V3-T2-7 SPD Series for Mounting External to Electrical Distribution Equipment . V3-T2-11 2 SPD MAX Series Surge Protection . V3-T2-16 SPC Surge Protective Device. V3-T2-20 2 CVX050/100 . V3-T2-24 SP1 Surge Protective Device . V3-T2-27 2 SP2 Surge Protective Device . V3-T2-29 AEGIS Powerline Filters . V3-T2-31 2 Sag Ride-Through (SRT2) . V3-T2-36 Power-Sure 700 (T700). V3-T2-40 2 Power-Sure 800 (T800). V3-T2-42 Power-Suppress 100 (T100) . V3-T2-46 2 Learn Online 2 2 Product Overview Product Description Features, Benefits and Functions 2 Eaton’s SPD series surge A complete offering of ● Uses thermally protected Safety Features protective devices are the sidemount units designed metal oxide varistor (MOV) ● All units use thermally 2 latest and most advanced for mounting external to technology protected metal oxide ® UL 1449 4th Edition certified electrical distribution ● Three feature package varistor technology (MOV) 2 surge protectors.
Load more

Recommended publications
  • PS-8R Manual
    PS-8R - POWER CONDITIONER/SEQUENCER PS-8R POWER SEQUENCER, 15A Owner's Manual Owner's PS-8R - POWER CONDITIONER/SEQUENCER Congratulations on your purchase of a Furman PS-8R Power Sequencer, a well-designed, reliable, and simple to use product that will help you avoid many headaches involved in installing a rack full of complex equipment. FEATURES DESCRIPTION • Power-up in three delayed outlet groups The PS-8R Power Sequencer is needed whenever various kinds of equipment must be powered up or • Power-down reverses sequence down in groups, rather than all simultaneously. In au- dio systems, sequenced powering is often necessary • Triple-mode varistor spike to allow turn-on transients from low level and surge suppression amplifiers and processors to settle down before any power amps are turned on, because simultane- • RFI / EMI filtering with multi-stage filter ous powering would result in a loud, annoying, and potentially destructive “pop” reaching the • Power Status LED’s indicate which speakers. And in any large system whose com- outlet groups have power ponents present an inductive load to the AC line (including electric motors, power supplies, • Mains Wiring indicators moni- and power amplifiers of all kinds), sequenced tor wiring integrity, show Nor- powering can avoid excessive inrush currents that cause circuit breakers to trip even though mal and five kinds of faults the steady-state currents are not excessive. • Rated 15 amps • Remote option allows turn-on and POWER turn-off at a distance simply by con- SEQUENCING necting a momentary or maintained- contact switch (and LED if desired) FEATURES • Multiple units may be linked to Using the PS-8R is a simple and inexpen- handle higher currents and/or sive way to apply and remove power in a con- more than three delay groups trolled, repeatable, foolproof 3-step sequence.
    [Show full text]
  • Ps-Pro - Power Conditioner/Sequencer Ps-Pro - Power Conditioner/Sequencer
    PS-PRO - POWER CONDITIONER/SEQUENCER PS-PRO - POWER CONDITIONER/SEQUENCER Congratulations on your purchase of a Furman PS-PRO Power Conditioner/Sequencer. The PS-PRO is one of Furman’s top-of-the-line PRO Series, offering maximum protec- tion from the AC line hazards faced by delicate analog and digital pro audio and video FEATURES The PS-PRO is a power sequencer, meaning it is ca- pable of powering a rack full of equipment in three l 20 amp (2400 watt) rating handles even steps separated by timed delays. It is useful whenev- the largest amps er various kinds of equipment must be powered up or down in groups, rather than all simultaneously. l Multiple levels of protection components In audio systems, sequenced powering is often can safely absorb large voltage spikes necessary to allow turn-on transients from low level and provide highly effective RF filtering amplifiers and processors to settle down before any — the most comprehensive protection power amps are turned on, because simultaneous available anywhere! powering would result in a loud, annoying, and potentially destructive “pop” reaching the speakers. l Extreme Voltage Shutdown guards And in any large system whose components present against catastrophically wrong voltages an inductive load to the AC line (including electric motors, power supplies, and power amplifiers of all l Power Status LED’s indicate which outlet kinds), sequenced powering can avoid excessive groups have power inrush currents that can cause circuit breakers to trip even though the steady-state currents are not l Mains Wiring indicators monitor wiring excessive. Power sequencing is particularly suited integrity, show Normal and five kinds of to applications where large installations must be faults switched by inexperienced personnel.
    [Show full text]
  • Power Demystified Garth Powell
    Power Demystified Garth Powell 2621 White Road Irvine CA 92614 USA Tel 949 585 0111 Fax 949 585 0333 www.audioquest.com Contents Introduction AC Surge Suppression AC Power Conditioners/LCR Filters AC Regeneration AC Isolation Transformers DC Battery Isolation Devices with AC Inverters or AC Regeneration Amplifiers AC UPS Battery Backup Devices AC Voltage Regulators DC Blocking Devices for AC Power Harmonic Oscillators for AC Power AC Resonance/Vibration Dampening Power Correction for AC Power Ground Noise Dissipation for AC Power Appendix: Some Practical Matters to Bear in Mind I. Source Component and Power Amplifier Current Draw II. AC Polarity III. Over-voltage and Under-voltage Conditions Index Introduction The source that supplies nearly all of our electronic components is alternating current (AC) power. For most, it is enough that they can rely on a service tap from their power utility to supply the voltage and current our audio-video (A/V) components require. In fact, in many parts of the world, the supplied voltage is quite stable, and if the area is free of catastrophic lightning strikes, there are seemingly no AC power problems at all. Obviously, there are areas where AC voltage can both sag and surge to levels well out of the optimum range, and others where electrical storms can potentially damage sensitive electrical equipment. There are many protection devices and AC power technologies that can ad- dress those dire circumstances, but too many fail to realize that there is no place on Earth that is supplied adequate AC power for today’s sensitive, high-resolution electronic components.
    [Show full text]
  • The Seven Types of Power Problems
    The Seven Types of Power Problems White Paper 18 Revision 1 by Joseph Seymour Contents > Executive summary Click on a section to jump to it Introduction 2 Many of the mysteries of equipment failure, downtime, software and data corruption, are the result of a prob- Transients 4 lematic supply of power. There is also a common problem with describing power problems in a standard Interruptions 8 way. This white paper will describe the most common types of power disturbances, what can cause them, Sag / undervoltage 9 what they can do to your critical equipment, and how to Swell / overvoltage 10 safeguard your equipment, using the IEEE standards for describing power quality problems. Waveform distortion 11 Voltage fluctuations 15 Frequency variations 15 Conclusion 18 Resources 19 Appendix 20 RATE THIS PAPER white papers are now part of the Schneider Electric white paper library produced by Schneider Electric’s Data Center Science Center [email protected] The Seven Types of Power Problems Introduction Our technological world has become deeply dependent upon the continuous availability of electrical power. In most countries, commercial power is made available via nationwide grids, interconnecting numerous generating stations to the loads. The grid must supply basic national needs of residential, lighting, heating, refrigeration, air conditioning, and transporta- tion as well as critical supply to governmental, industrial, financial, commercial, medical and communications communities. Commercial power literally enables today’s modern world to function at its busy pace. Sophisticated technology has reached deeply into our homes and careers, and with the advent of e-commerce is continually changing the way we interact with the rest of the world.
    [Show full text]
  • Design of a Conditioner for Smoothing Wind Turbine Output Power
    Scholars' Mine Masters Theses Student Theses and Dissertations Spring 2011 Design of a conditioner for smoothing wind turbine output power Murali Bottu Follow this and additional works at: https://scholarsmine.mst.edu/masters_theses Part of the Electrical and Computer Engineering Commons Department: Recommended Citation Bottu, Murali, "Design of a conditioner for smoothing wind turbine output power" (2011). Masters Theses. 4900. https://scholarsmine.mst.edu/masters_theses/4900 This thesis is brought to you by Scholars' Mine, a service of the Missouri S&T Library and Learning Resources. This work is protected by U. S. Copyright Law. Unauthorized use including reproduction for redistribution requires the permission of the copyright holder. For more information, please contact [email protected]. DESIGN OF A CONDITIONER FOR SMOOTHING WIND TURBINE OUTPUT POWER by MURALI BOTTU A THESIS Presented to the Faculty of the Graduate School of the MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY In Partial Fulfillment of the Requirements for the Degree MASTER OF SCIENCE IN ELECTRICAL ENGINEERING 2011 Approved by Dr. Mariesa L. Crow, Advisor Dr. Badrul H. Chowdhury Dr. Mehdi Ferdowsi 2011 Murali Bottu All Rights Reserved iii ABSTRACT As a result of wind speed intermittency, wind turbine output power can be highly variable. The large variability in output power can adversely impact local loads that are sensitive to pulsating power. To mitigate large swings in power, the wind turbine output power can be smoothed by using a small energy buffer. A power conditioner is proposed to smooth the wind power output by utilizing the energy of an ultracapacitor. The conditioner is based on a single phase voltage source inverter (VSI) connected between the grid interconnection point and the ultracapacitor.
    [Show full text]
  • Powervar Full Line Product Brochure
    n PRODUCT CATALOG n Providing Global Power Quality Solutions It is a global economy, that is why Powervar manufactures power quality solutions for North American and International electronic equipment. Getting conditioned, quality power is not strictly a North American challenge. Globally, the quality of electrical power can vary dramatically from place to place. Every piece of electronic equipment in the world works better and more dependably when it is protected from spikes, blackouts, electrical noise, common mode voltage and other power protection challenges. That is why Powervar designs and manufactures a complete line of power quality solutions to be used around the world. ® Powervar provides power protection solutions you can rely on ... Solutions for Power Quality every hour of every day ... everywhere ... with confidence. Your Avoid all of the unnecessary costs 4-5 sensitive electronic systems are hanging out there . open and vulnerable to nearly every kind of power problem man and nature The 3 D’s of Power Quality 6 can throw at them. This product guide provides information to The ABCs of Power Conditioning 7 help you select effective protection for your microprocessor- Power Viruses 8-9 based electronic equipment. It shows the complete lineup of We have the right solution 10-11 Powervar products including features, specifications and product Standard Power Conditioners 12-13 selection assistance. Ground Guard Power Conditioners 14-15 Medical Power Conditioners 16-17 Welcome to Powervar, offering real solutions and quality Hardwired Power Conditioners 18-19 protection for your critical technology. Single-Phase Power Conditioner 20-21 Global Power Interface (GPI) Power Conditioners 22-27 GTS Series UPM 28-29 Security II UPMs 30-37 Mobile Power Manager (MPM) 38-39 Powervar Sales Philosophy Security Plus II Series UPS 40-41 Sinergy III Series UPS 42-43 The Powervar technical sales team is dedicated to solving power quality problems before and after they occur.
    [Show full text]
  • Brochure: Solahd™ Industrial Power Solutions, April 2021
    Industrial grade products to meet the most demanding applications worldwide. SolaHD™ Industrial Power Solutions Power quality solutions to control your equipment or facility’s efficiency, productivity, and longevity. Introduction SolaHD brand products by Emerson have been exclusively focused on providing total power quality throughout manufacturing facilities since 1915. During this time, production equipment and efficiencies have evolved beyond what was once thought possible; however, our commitment has remained the same. From service entrance to point-of-use, our SolaHD products are there to optimize production performance. We have stayed at the forefront of production technologies with power solutions designed exclusively for modern manufacturing’s sensitive computerized equipment, such as networks, sensors, PLCs and safety equipment. Our broad line of DIN rail power products save space and provide flexibility for modifications in the field or reconfigurations and faster installations. 2 SolaHD products by Emerson can power your facility from the service entrance to the most critical production equipment in the harshest applications. Industrial Facility Wide Protection p 5 Filters and Surge Protective Devices p 10 Industrial Power Quality Solutions p 6 Power Conditioners p 15 Power Quality Solutions for All Applications p 7 Uninterruptible Power Supplies p 18 More Efficient Control Panels p 8 Transformers p 24 The Broadest Range of DIN Rail Products p 9 Power Supplies p 30 Visit www.solahd.com or contact your local SolaHD
    [Show full text]
  • SPD, Power Conditioning, PF Capacitors and Harmonic Filters
    SPD, Power Conditioning, PF Capacitors and Harmonic Filters Industrial Surge Protection Products 2.1 Surge Protection and Power Conditioning 2 Introduction . V3-T2-2 Product Overview . V3-T2-5 2 SPD Series for Integration into Electrical Distribution Equipment . V3-T2-7 SPD Series for Mounting External to Electrical Distribution Equipment V3-T2-11 2 SPV Surge Protective Device . V3-T2-16 2 CVX050/100 . V3-T2-18 SP1 Surge Protective Device . V3-T2-21 2 SP2 Surge Protective Device . V3-T2-23 AEGIS Powerline Filters . V3-T2-25 2 Sag Ride-Through (SRT) . V3-T2-30 2 Electronic Voltage Regulator (EVR). V3-T2-36 2 2.2 Power Factor Correction and Harmonic Filtering Product Overview . V3-T2-38 2 UNIPUMP . V3-T2-41 UNIPAK. V3-T2-44 2 AUTOVAR 300 Automatic Power Factor Correction Capacitor Systems V3-T2-55 2 AUTOVAR 600 Automatic Power Factor Correction Capacitor Systems V3-T2-58 AUTOVAR Filter—LV Automatic Harmonic Filter. V3-T2-63 2 Transient-Free Static Switching Power Factor Correction Units . V3-T2-67 Active-Harmonic Filter-Harmonic Correction Unit—NEMA 1 Enclosure V3-T2-71 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Volume 3—Power Distribution and Control Assemblies CA08100004E—April 2014 www.eaton.com V3-T2-1 SPD, Power Conditioning, PF Capacitors and Harmonic Filters 2.1 Surge Protection and Power Conditioning 2 Industrial and Commercial Surge Protection Contents Description Page 2 Introduction Product Overview . V3-T2-5 2 SPD Series for Integration into Electrical Distribution Equipment . V3-T2-7 2 SPD Series for Mounting External to Electrical Distribution Equipment.
    [Show full text]
  • Power Conditioners and Distributors
    POWER CONDITIONERS AND DISTRIBUTORS Power Conditioners LIST SACR-191 ......sequence controller ....................699.72 AR-SERIES SACS-1 ..........single outlet ................................152.86 SACS-1F ........single outlet ................................245.94 Voltage Regulators SACS-5 ..........six outlet sequence strip ............583.47 UL Listed Power The AR-Series provides protection from line volt- CALL FOR PRICE age irregularities such as brownouts, over-volt- Conditioners ages, spikes, surges, and RFI. They convert a vari- This family of power conditioners from ETA offers many ety of voltages to 120V using toroidal autoform- options in single rack space unit. Features include very ers. They have been specifically designed with high quality EMI/RFI filtering, Watch-Dog (3-leg filter the needs of audio & video with filters to reduce protection), and more. Standard PD units have a line noise, spikes, surges, and RFI. They employ 15A/1800W capacity while the versions with a “P” series mode protection circuitry (SMP), which offer 20A/2400W protection. LIST provides the highest level of power protection PL2000 PD8 ..............8 outlets ....................................79.00 available. LED bar graph meters indicate input Rack Light with PD8L ............8 outlets, retractable lights ........99.00 voltage and regulation status. LIST PD9L ............8 wall warts, AR1215..........9-outlet, for 89-139V ..................549.95 Power Distribution retractable lights ......................160.00 AR1220..........14-outlet, for 97-141V ..............1329.95 This powerful rotary light tube directs light exact- PD11LV ........11 outlets, 2 unswitched, AR1230..........6-outlet +2 twistlock outlets, ly where you need it along with 8 standard IEC retractable lights, voltmeter ......240.00 for 97-141V ..............................1999.95 connectors to power your rack.
    [Show full text]
  • Ultra-Reg Phase Stabilizer Constant Power 18
    - Technical Publications POWER-REG (1 and 3 Phase) ULTRA-REG PHASE STABILIZER CONSTANT POWER 18 Operating Documentation 6002-032 Rev. H OnLine Power Congratulations on selecting one of the fine products from OnLine Power, the Leader in Power Protection Technology. Our wide product offering includes Uninterruptible Power Systems (UPS), Power Conditioners, Automatic Voltage Regulators and Specialty Transformers (e.g. computer-grade, medical-grade). Since our beginnings in 1975, OnLine Power has shipped thousands of these fine products around the world, to discerning customers, for use on sensitive equipment and critical applications. Our customers, both new and long-time, continue to enjoy security and peace of mind as they realize what it means to ”Stay On Line with OnLine Power”. One of our goals is to make these manuals both comprehensive and easy to use. This new-format User’s Manual is the result of ideas and inputs from customers who have taken an active interest in our continued success. We invite constructive feedback on our products and documentation via fax, mail or telephone. HEADQUARTERS FACTORY OnLine Power, Inc OnLine Power, Inc. Los Angeles, CA Los Angeles, CA SALES Phone (800) 227-8899 Inside CA (323) 721-5017 FAX No. (323) 721-3929 MANUFACTURING Phone (323) 720-4125 FAX No. (323) 889-6636 http://www.onlinepower.com email: [email protected] SERVICE Phone (800) 797-7782 (PWR-SRVC) FAX No. (323) 721-3929 6002-032 REV H a OnLine Power OnLine Power, Inc. Proprietary Reproduction or Distribution forbidden NOTICE: THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION This document contains proprietary and confidential information of OnLine Power, Inc.
    [Show full text]
  • Advanced Active Power Conditioner to Improve Power Quality in a Micro Grid
    IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE) e-ISSN: 2278-1676,p-ISSN: 2320-3331, Volume 11, Issue 6 Ver. IV (Nov. – Dec. 2016), PP 01-08 www.iosrjournals.org Advanced Active Power Conditioner to Improve Power Quality in a Micro Grid Prof.A.N.Malleswara Rao Professor, Dept Of EEE, RMCE,Hyderabad Abstract: This paper presents a three-phase Active Power Conditioner to improve power quality in micro grids based on renewable energy. A micro grid is a weak electrical grid which can be easily subject to disturbances. The Active Power Conditioner (APC) presented in this paper acts as an interface between renewable energy sources and the AC bus of a micro grid and uses an improved control strategy, which makes possible to inject energy in the micro grid, compensate the current harmonics and correct the power factor. Moreover, the proposed control strategy allows the line current at the point of common coupling (PCC) to be balanced and sinusoidal even when the load is unbalanced. Consequently, the voltage at the PPC becomes balanced. Simulation results show the validity of the innovative control strategy. Keywords: Active Power Conditioner, Micro grids, Renewable Energy, Current control I. Introduction Technological advances in power electronics have created opportunities for the renewable sources to be exploited in different configurations. The power electronic interface allows renewable sources to be connected with the distribution grid or interconnected with other renewable and non-renewable generators, storage systems and loads in a micro grid [1]. A micro grid is different from a main grid system which can be considered as an unlimited power so that load variations do not affect the stability of the system.
    [Show full text]
  • Power Factor Pro Manual Power Factor Pro Manual
    POWER FACTOR PRO MANUAL POWER FACTOR PRO MANUAL PF-PRO FEATURES first comprehensive AC power conditioner for instrument amplifiers. • Clear Tone Technology provides Power Factor correction with 45 amps peak Today’s AC power is contaminated. Whether current reservoir you play in a stadium, bar, or rehearsal space, they all have one thing in common: • SMP+ (Series Multi-Stage Protection Plus) the AC power is supplied from your local with Extreme Voltage Shutdown (EVS) utility. What’s worse is that the “power factor” • LiFT (Linear Filtering Technology) with zero supplied from your building’s AC outlet is ground contamination typically poor, thanks to increasingly over • Four rear panel outlets taxed power lines and raised line impedance. • 12 amp rating, with circuit breaker In fact, the quality of AC power has been so • Three year limited warranty poor for so long, most musicians have no idea how great their amplifiers could really sound. • Front panel meter to display incoming line When the AC power factor is poor, amplifiers voltage ranging from 90 to 128 volts sound muddy because their power supplies can’t deliver when pushed. The scream and cry from a guitar loses bite and harmonics, ADDITIONAL PF-PRO R bass guitars lose their punch and weight, FEATURES keyboards sound nasally, losing clarity, attack, and extension. • Compact rack-mountable design • 8 rear panel outlets plus one convenient front Furman’s Power Factor Pro addresses this panel outlet issue - allowing your amplifier to sound its best while protecting it at the same time. • BNC connector on the rear panel allows you to attach any standard (12VAC 0.5 amp) gooseneck lamp to illuminate the rear of DESCRIPTION your rack The Power Factor Pro’s “Clear Tone TechnologyTM” actually lowers the AC line INTRODUCTION impedance supplied by your wall outlet, while storing energy for peak current demands.
    [Show full text]