Data-Over-Cable Service Interface Specifications DOCSIS 2.0 Radio

Total Page:16

File Type:pdf, Size:1020Kb

Data-Over-Cable Service Interface Specifications DOCSIS 2.0 Radio Data-Over-Cable Service Interface Specifications DOCSIS 2.0 Radio Frequency Interface Specification CM-SP-RFIv2.0-I07-041210 ISSUED SPECIFICATION Notice This document is a cooperative effort undertaken at the direction of Cable Television Laboratories, Inc. for the benefit of the cable industry in general. Neither CableLabs nor any member company is responsible for any liability of any nature whatsoever resulting from or arising out of use or reliance upon this specification by any party. This document is furnished on an “AS IS” basis and neither CableLabs nor its members provides any representation or warranty, express or implied, regarding its accuracy, completeness, or fitness for a particular purpose. © Copyright 1999-2004 Cable Television Laboratories, Inc. All rights reserved. CM-SP-RFIv2.0-I07-041210 Data-Over-Cable Service Interface Specifications Document Status Sheet Document Control Number: CM-SP-RFIv2.0-I07-041210 Reference: Radio Frequency Interface Specification Revision History: I01 — First Issued Release, December 31, 2001 I02 — Second Issued Release, June 17, 2002 I03 — Third Issued Release, December 18, 2002 I04 — Fourth Issued Release, July 30, 2003 I05 — Fifth Issued Release, April 7, 2004 I06 — Sixth Issued Release, August 4, 2004 I07 — Seventh Issued Release, December 10, 2004 Date: December 10, 2004 Status Code: Work in Draft Issued Closed Process Distribution Restrictions: CableLabs CL CL Public only Reviewers Vendor Key to Document Status Codes Work in Process: An incomplete document, designed to guide discussion and generate feedback, that may include several alternative requirements for consideration. Draft: A document in specification format considered largely complete, but lacking review by cable industry and vendors. Drafts are susceptible to substantial change during the review process. Issued: A stable document, which has undergone rigorous member and vendor review and is suitable for product design and development, cross-vendor interoperability, and for certification testing. Closed: A static document, reviewed, tested, validated, and closed to further engineering change requests to the specification through CableLabs. Trademarks: DOCSIS®, eDOCSIS™, PacketCable™, CableHome®, OpenCable™, CableCARD™, CableOffice™ , and CableLabs® are trademarks of Cable Television Laboratories, Inc. ii Radio Frequency Interface Specification CM-SP-RFIv2.0-I07-041210 Table of Contents 1 SCOPE AND PURPOSE.................................................................................................................................1 1.1 SCOPE ................................................................................................................................................................1 1.2 REQUIREMENTS .................................................................................................................................................2 1.3 BACKGROUND ...................................................................................................................................................2 1.3.1 Service Goals..........................................................................................................................................2 1.3.2 Reference Architecture ...........................................................................................................................3 1.3.3 Categories of Interface Specification .....................................................................................................5 1.3.4 Statement of Compatibility .....................................................................................................................5 1.4 CONVENTIONS FOR THIS SPECIFICATION...........................................................................................................5 2 REFERENCES (NORMATIVE/INFORMATIVE) .....................................................................................7 3 GLOSSARY (INFORMATIVE) ..................................................................................................................11 4 FUNCTIONAL ASSUMPTIONS.................................................................................................................23 4.1 BROADBAND ACCESS NETWORK ....................................................................................................................23 4.2 EQUIPMENT ASSUMPTIONS..............................................................................................................................23 4.2.1 Frequency Plan.....................................................................................................................................23 4.2.2 Compatibility with Other Services........................................................................................................24 4.2.3 Fault Isolation Impact on Other Users.................................................................................................24 4.2.4 Cable System Terminal Devices ...........................................................................................................24 4.3 RF CHANNEL ASSUMPTIONS ...........................................................................................................................24 4.3.1 Transmission Downstream ...................................................................................................................24 4.3.2 Transmission Upstream........................................................................................................................25 4.4 TRANSMISSION LEVELS ...................................................................................................................................26 4.5 FREQUENCY INVERSION ..................................................................................................................................26 5 COMMUNICATION PROTOCOLS ..........................................................................................................27 5.1 PROTOCOL STACK ...........................................................................................................................................27 5.1.1 CM and CMTS as Hosts .......................................................................................................................27 5.1.2 Data Forwarding Through the CM and CMTS ....................................................................................28 5.2 THE MAC FORWARDER ..................................................................................................................................31 5.2.1 Rules for Data-Link-Layer Forwarding ...............................................................................................32 5.3 NETWORK LAYER............................................................................................................................................32 5.3.1 Requirements for IGMP Management..................................................................................................33 5.4 ABOVE THE NETWORK LAYER ........................................................................................................................35 5.5 DATA LINK LAYER..........................................................................................................................................35 5.5.1 LLC Sublayer........................................................................................................................................36 5.5.2 Link-Layer Security Sublayer ...............................................................................................................36 5.5.3 MAC Sublayer.......................................................................................................................................36 5.6 PHYSICAL LAYER ............................................................................................................................................36 5.6.1 Downstream Transmission Convergence Sublayer..............................................................................36 iii CM-SP-RFIv2.0-I07-041210 Data-Over-Cable Service Interface Specifications 5.6.2 PMD Sublayer...................................................................................................................................... 37 6 PHYSICAL MEDIA DEPENDENT SUBLAYER SPECIFICATION .................................................... 39 6.1 SCOPE ............................................................................................................................................................. 39 6.2 UPSTREAM ...................................................................................................................................................... 39 6.2.1 Overview .............................................................................................................................................. 39 6.2.2 Signal Processing Requirements ......................................................................................................... 40 6.2.3 Modulation Formats ............................................................................................................................ 44 6.2.4 R-S Encode........................................................................................................................................... 44 6.2.5 R-S Frame Structure ...........................................................................................................................
Recommended publications
  • The Most Common Digital Modulation Techniques Are: Phase-Shift Keying
    Common Digital Modulation Techniques and Pulse Modulation Methods The most common digital modulation techniques are: Phase-shift keying (PSK): o Binary PSK (BPSK), using M=2 symbols o Quadrature PSK (QPSK), using M=4 symbols o 8PSK, using M=8 symbols o 16PSK, using M=16 symbols o Differential PSK (DPSK) o Differential QPSK (DQPSK) o Offset QPSK (OQPSK) o π/4–QPSK Frequency-shift keying (FSK): o Audio frequency-shift keying (AFSK) o Multi-frequency shift keying (M-ary FSK or MFSK) o Dual-tone multi-frequency (DTMF) o Continuous-phase frequency-shift keying (CPFSK) Amplitude-shift keying (ASK) On-off keying (OOK), the most common ASK form o M-ary vestigial sideband modulation, for example 8VSB Quadrature amplitude modulation (QAM) - a combination of PSK and ASK: o Polar modulation like QAM a combination of PSK and ASK.[citation needed] Continuous phase modulation (CPM) methods: o Minimum-shift keying (MSK) o Gaussian minimum-shift keying (GMSK) Orthogonal frequency-division multiplexing (OFDM) modulation: o discrete multitone (DMT) - including adaptive modulation and bit-loading. Wavelet modulation Trellis coded modulation (TCM), also known as trellis modulation Spread-spectrum techniques: o Direct-sequence spread spectrum (DSSS) o Chirp spread spectrum (CSS) according to IEEE 802.15.4a CSS uses pseudo-stochastic coding o Frequency-hopping spread spectrum (FHSS) applies a special scheme for channel release MSK and GMSK are particular cases of continuous phase modulation. Indeed, MSK is a particular case of the sub-family of CPM known as continuous-phase frequency-shift keying (CPFSK) which is defined by a rectangular frequency pulse (i.e.
    [Show full text]
  • Software Defined Acoustic Underwater Modem
    Software Defined Acoustic Underwater Modem Jakob Lindgren April 13, 2011 Abstract Today many types of communication are employed on seagoing vessels, such as radio, satellite and Wi-Fi but only one type of communication is practical for submerged vessels, the acoustic underwater modem. The ”off-the-shelf” modems are sometimes difficult to update and replace, especially on a large submarine. But by separating the hardware from the signal processing and making the software modular more versatility can be achieved. The questions that this thesis are asking are: is it possible to implement the signal processing in software? How small or large should the modules be? What kind of architecture should be used? This thesis shows that it is indeed possible to implement simple algorithms that can isolate a signal and read its content regardless of the hardware configuration. Calculations show that up to 13 kbps can be reached at a range of one kilometer. It is most practical to make the entire physical layer into one module and the size of the system could drastically change the type of architecture used. 1 Preface This Master's thesis from Jakob Lindgren is the final project for receiving the Master's degree in Robotics at M¨alardalenUniversity in V¨aster˚as,Sweden. It covers the basics of digital communication in the underwater channel as well as some simple algorithms for software defined communication. The purpose of this master thesis is to investigate how a software defined acoustic underwater communication can be implemented. This work was done at Saab Underwater Systems in Motala, Sweden, during the autumn term of 2010.
    [Show full text]
  • Etsi En 302 878-2 V1.1.1 (2011-11)
    ETSI EN 302 878-2 V1.1.1 (2011-11) European Standard Access, Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 2: Physical Layer; DOCSIS 3.0 2 ETSI EN 302 878-2 V1.1.1 (2011-11) Reference DEN/ATTM-003006-2 Keywords access, broadband, cable, data, IP, IPCable, modem ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission.
    [Show full text]
  • Download Article
    IJIRST –International Journal for Innovative Research in Science & Technology| Volume 1 | Issue 8 | January 2015 ISSN (online): 2349-6010 High Speed Low Power Veterbi Decoder For TCM Decoders Using Xilinx T.Mahesh Kumar P.Vijai Bhaskar M.Tech (VLSI) Head of the Department Department of Electronics & Communication Engineering, Department of Electronics & Communication Engineering, JNTUH JNTUH AVN Institute of Engineering & Technology Telangana, India AVN Institute of Engineering & Technology Telangana, India Abstract It is well known that the Viterbi decoder (VD) is the dominant module determining the overall power consumption of TCM decoders. High-speed, low-power design of Viterbi decoders for trellis coded modulation (TCM) systems is presented in this paper. We propose a pre-computation architecture incorporated with -algorithm for VD, which can effectively reduce the power consumption without degrading the decoding speed much. A general solution to derive the optimal pre-computation steps is also given in the paper. Implementation result of a VD for a rate-3/4 convolutional code used in a TCM system shows that compared with the full trellis VD, the precomputation architecture reduces the power consumption by as much as 70% without performance loss, while the degradation in clock speed is negligible. Keywords: Viterbi Decoder, VLSI, Trellis Coded Modulation (TCM). _______________________________________________________________________________________________________ I. INTRODUCTION In telecommunication, trellis modulation (also known as trellis coded modulation, or simply TCM) is a modulation scheme which allows highly efficient transmission of information over band-limited channels such as telephone lines. Trellis modulation was invented by Gottfried Ungerboeck working for IBM in the 1970s, and first described in a conference paper in 1976; but it went largely unnoticed until he published a new detailed exposition in 1982 which achieved sudden widespread recognition.
    [Show full text]
  • DOCSIS 3.0 Physical Layer Specification
    Data-Over-Cable Service Interface Specifications DOCSIS® 3.0 Physical Layer Specification CM-SP-PHYv3.0-C01-171207 CLOSED Notice This DOCSIS specification is the result of a cooperative effort undertaken at the direction of Cable Television Laboratories, Inc. for the benefit of the cable industry and its customers. You may download, copy, distribute, and reference the documents herein only for the purpose of developing products or services in accordance with such documents, and educational use. Except as granted by CableLabs® in a separate written license agreement, no license is granted to modify the documents herein (except via the Engineering Change process), or to use, copy, modify or distribute the documents for any other purpose. This document may contain references to other documents not owned or controlled by CableLabs. Use and understanding of this document may require access to such other documents. Designing, manufacturing, distributing, using, selling, or servicing products, or providing services, based on this document may require intellectual property licenses from third parties for technology referenced in this document. To the extent this document contains or refers to documents of third parties, you agree to abide by the terms of any licenses associated with such third-party documents, including open source licenses, if any. © Cable Television Laboratories, Inc., 2006 - 2017 CM-SP-PHYv3.0-C01-171207 Data-Over-Cable Service Interface Specifications DISCLAIMER This document is furnished on an "AS IS" basis and neither CableLabs nor its members provides any representation or warranty, express or implied, regarding the accuracy, completeness, noninfringement, or fitness for a particular purpose of this document, or any document referenced herein.
    [Show full text]
  • Chapter 1: Modulation Systems
    SYLLABUS: 141304 – ANALOG AND DIGITAL COMMUNICATION L T P C 3 1 0 4 UNIT I FUNDAMENTALS OF ANALOG COMMUNICATION 9 Principles of Amplitude Modulation – AM Envelope – Frequency Spectrum and Bandwidth – Modulation Index and Percent Modulation – AM Voltage Distribution – AM Power Distribution – Angle Modulation – FM and PM Waveforms – Phase Deviation and Modulation Index – Frequency Deviation and Percent Modulation – Frequency Analysis of Angle Modulated Waves – Bandwidth Requirements for Angle Modulated Waves. UNIT II DIGITAL COMMUNICATION 9 Basics – Shannon Limit for Information Capacity – Digital Amplitude Modulation – Frequency Shift Keying – FSK Bit Rate and Baud – FSK Transmitter – BW Consideration of FSK – FSK Receiver – Phase Shift Keying – Binary Phase Shift Keying – QPSK – Quadrature Amplitude Modulation – Bandwidth Efficiency – Carrier Recovery – Squaring Loop – Costas Loop – DPSK. UNIT III DIGITAL TRANSMISSION 9 Basics – Pulse Modulation – PCM – PCM Sampling – Sampling Rate – Signal to Quantization Noise Rate – Companding – Analog and Digital – Percentage Error – Delta Modulation – Adaptive Delta Modulation – Differential Pulse Code Modulation – Pulse Transmission – Intersymbol Interference – Eye Patterns. UNIT IV DATA COMMUNICATIONS 9 Basics – History of Data Communications – Standards Organizations for Data Communication – Data Communication Circuits – Data Communication Codes – Error Control – Error Detection – Error Correction – Data Communication Hardware – Serial and Parallel Interfaces – Data Modems – Asynchronous Modem – Synchronous Modem – Low-Speed Modem – Medium and High Speed Modem – Modem Control. UNIT V SPREAD SPECTRUM AND MULTIPLE ACCESS TECHNIQUES 9 Basics – Pseudo-Noise Sequence – DS Spread Spectrum with Coherent Binary PSK – Processing Gain – FH Spread Spectrum – Multiple Access Techniques – Wireless Communication – TDMA and CDMA in Wireless Communication Systems – Source Coding of Speech for Wireless Communications. L: 45 T: 15 Total: 60 TEXT BOOKS 1.
    [Show full text]
  • Report and Opinion, 2012;4:(1) 62
    Report and Opinion, 2012;4:(1) http://www.sciencepub.net/report Digital Modulation Techniques Evaluation in Distribution Line Carrier system Sh. Javadi 1, M. Hosseini Aliabadi 2 1Department of electrical engineering-Islamic Azad University -Central Tehran Branch [email protected] Abstract- In this paper, different methods of modulation technique applicable in data transferring system over distribution line carries (DLC) system is investigated. Two type of modulation –analogue and digital – is evaluated completely. Different digital techniques such as direct-sequence spread spectrum (DSSS), Frequency-hopping spread spectrum (FHSS), time-hopping spread spectrum (THSS), and chirp spread spectrum (CSS) have been analyzed. The results shows that because of electrical network nature, digital modulation techniques are more useful than analog modulation techniques such as Amplitude modulation (AM) and Angle modulation . [Sh. Javadi, M. Hosseini Aliabadi. Digital Modulation Techniques Evaluation in Distribution Line Carrier system. Report and Opinion 2012; 4(1):62-69]. (ISSN: 1553-9873). http://www.sciencepub.net/report. 11 KEYWORDS- POWER DISTRIBUTION NETWORKS, POWER LINE CARRIER, COMMUNICATION, MODULATION TECHNIQUE Introduction During the last decades, the usage of telecommunications systems has increased rapidly. Because of a permanent necessity for new telecommunications services and additional transmission capacities, there is also a need for the development of new telecommunications networks and transmission technologies. From the economic point of view, telecommunications promise big revenues, motivating large investments in this area. Therefore, there are a large number of communications enterprises that are building up high-speed networks, ensuring the realization of various telecommunications services that can be used worldwide. The direct connection of the customers/subscribers is realized over the access networks, realizing access of a number of subscribers situated within a radius of several hundreds of meters.
    [Show full text]
  • Implementation of Various Digital Modulation Techniques Using Low Cost Components
    IMPLEMENTATION OF VARIOUS DIGITAL MODULATION TECHNIQUES USING LOW COST COMPONENTS Submitted in partial fulfillment of the Degree of Bachelor of Technology May – 2014 Under the Supervision of Mr. Tapan Jain By Abhishek Rustagi (101040) Dhruv Srow (101115) Vivek Raj Singh (101138) DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING JAYPEE UNIVERSITY OF INFORMATION TECHNOLOGY, WAKNAGHAT JAYPEE UNIVERSITY OF INFORMATION TECHNOLOGY (Established under the Act 14 of Legislative Assembly of Himachal Pradesh) Waknaghat, P.O. DomeharBani. Teh. Kandaghat, Distt. Solan- 173234(H.P) Phone: 01792-245367, 245368,245369 Fax-01792-245362 DECLARATION We hereby declare that the work reported in the B. Tech thesis entitled “Implementation of various digital modulation techniques using low cost components” submitted by “Mr. Abhishek Rustagi , Mr. Dhruv Srow and Mr. Vivek Raj Singh” at Jaypee University Of Information Technology, Waknaghat is an authentic record of our work carried out under the supervision of Mr. Tapan Jain. This work has not been submitted partially or wholly to any other university or institution for the award of this or any other degree or diploma. Mr. Abhishek Rustagi Mr. Dhruv Srow Mr. Vivek Raj Singh Department of Electronics and Communication Engineering Jaypee University of Information Technology (JUIT) Waknaghat, Solan – 173234, India II JAYPEE UNIVERSITY OF INFORMATION TECHNOLOGY (Established under the Act 14 of Legislative Assembly of Himachal Pradesh) Waknaghat, P.O. DomeharBani. Teh. Kandaghat, Distt. Solan- 173234(H.P) Phone: 01792-245367, 245368,245369 Fax-01792-245362 CERTIFICATE This is to certify that the work titled “Implementation of various digital modulation techniques using low cost components” submitted by “Mr. Abhishek Rustagi , Mr.
    [Show full text]
  • Performance of High Rate Space-Time Trellis Coded Modulation in Fading Channels
    PERFORMANCE OF HIGH RATE SPACE-TIME TRELLIS CODED MODULATION IN FADING CHANNELS by Sokoya Oludare Ayodeji University ofKwazulu-Natal 2005 Submitted in fulfil/ment ofthe academic requirementfor the degree ofMScEng in the School ofElectrical, Electronic and Computer Engineering, University ofKwaZulu­ Natal,2005 ABSTRACf Future wireless communication systems promise to offer a variety ofmultimedia services which require reliable transmission at high data rates over wireless links. Multiple input multiple output (MIMO) systems have received a great deal of attention because they provide very high data rates for such links. Theoretical studies have shown that the quality provided by MIMO systems can be increased by using space-time codes. Space-time codes combine both space (antenna) and time diversity in the transmitter to increase the efficiency of MIMO system. The three primary approaches, layered space­ time architecture, space-time trellis coding (STTC) and space-time block coding (STBC) represent a way to investigate transmitter-based signal processing for diversity exploitation and interference suppression. The advantages of STBC (i.e. low decoding complexity) and STTC (i.e. TCM encoder structure) can be used to design a high rate space-time trellis coded modulation (HR-STTCM). Most space-time codes designs are based on the assumption of perfect channel state information at the receiver so as to make coherent decoding possible. However, accurate channel estimation requires a long training sequence that lowers spectral efficiency. Part of this dissertation focuses on the performance of HR-STTCM under non-coherent detection where there is imperfect channel state information and also in environment where the channel experiences rapid fading.
    [Show full text]
  • Ep 1130919 A2
    Europäisches Patentamt *EP001130919A2* (19) European Patent Office Office européen des brevets (11) EP 1 130 919 A2 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: (51) Int Cl.7: H04N 7/173, H04L 12/28, 05.09.2001 Bulletin 2001/36 H04J 11/00, H04J 13/02, H04J 3/06, H04B 1/707, (21) Application number: 01104541.6 H04L 5/02, H04L 27/38 (22) Date of filing: 25.07.1996 (84) Designated Contracting States: (72) Inventors: AT BE CH DE DK ES FI FR GB GR IE IT LI LU MC • Rakib, Selim Shlomo, Dr. NL PT SE Cupertino, California 95014 (US) • Azenkot, Yehuda (30) Priority: 25.08.1995 US 519630 San Jose, California 95129 (US) 19.01.1996 US 588650 19.07.1996 US 684243 (74) Representative: Brax, Matti Juhani Berggren Oy Ab, (62) Document number(s) of the earlier application(s) in P.O. Box 16 accordance with Art. 76 EPC: 00101 Helsinki (FI) 96927270.7 / 0 858 695 Remarks: (71) Applicant: Terayon Communication Systems, Inc. This application was filed on 05 - 03 - 2001 as a Santa Clara, CA 95054 (US) divisional application to the application mentioned under INID code 62. (54) Apparatus and method for digital data transmission (57) A method and apparatus for carrying out syn- energy of each channel data over a frame of data trans- chronous co-division multiple access (SCDMA) commu- mitted in a code domain. Frames are synchronized as nication of multiple channels of digital data over a between remote (1164) and central units (1160) using a shared transmission media (1162).
    [Show full text]
  • Chapter 3 Digital Transmission Fundamentals
    Chapter 3 Digital Transmission Fundamentals Digital Representation of Information Why Digital Communications? Digital Representation of Analog Signals Characterization of Communication Channels Fundamental Limits in Digital Transmission Line Coding Modems and Digital Modulation Properties of Media and Digital Transmission Systems Error Detection and Correction Digital Networks z Digital transmission enables networks to support many services TV E-mail Telephone Questions of Interest z How long will it take to transmit a message? z How many bits are in the message (text, image)? z How fast does the network/system transfer information? z Can a network/system handle a voice (video) call? z How many bits/second does voice/video require? At what quality? z How long will it take to transmit a message without errors? z How are errors introduced? z How are errors detected and corrected? z What transmission speed is possible over radio, copper cables, fiber, infrared, …? Chapter 3 Digital Transmission Fundamentals Digital Representation of Information Bits, numbers, information z Bit: number with value 0 or 1 z n bits: digital representation for 0, 1, … , 2n z Byte or Octet, n = 8 z Computer word, n = 16, 32, or 64 z n bits allows enumeration of 2n possibilities z n-bit field in a header z n-bit representation of a voice sample z Message consisting of n bits z The number of bits required to represent a message is a measure of its information content z More bits → More content Block vs. Stream Information Block Stream z Information that occurs z
    [Show full text]
  • Performance Analysis of Asymmetric Constellation in Concatenation with Trellis Coded
    A Thesis entitled Performance Analysis of Asymmetric Constellation in Concatenation with Trellis Coded Modulation for use in Intelligent Systems by Abbas Firoz Saboowala Submitted to the Graduate Faculty as partial fulfillment of the requirements for the Master of Science Degree in Electrical Engineering Dr. Kim Junghwan, Committee Chair Dr. Mohammed Niamat, Committee Member Dr. Kim Dong-Shik, Committee Member Dr. Patricia R. Komuniecki, Dean College of Graduate Studies The University of Toledo May 2011 An Abstract of Performance Analysis of Asymmetric Constellation in Concatenation with Trellis Coded Modulation for use in Intelligent Systems by Abbas F. Saboowala Submitted to the Graduate Faculty as partial fulfillment of the requirements for the Master of Science Degree in Electrical Engineering The University of Toledo May 2011 This thesis is on trellis coded modulation (TCM) schemes with asymmetrical constellation. This modulation technique can be easily adapted to the intelligent systems like Cognitive Radio and Software Defined Radio (SDR) with improved error performance. Different types of asymmetric constellation methods for QPSK, 8-PSK and 16-PSK are used, which result in better performance compared to the case of standard symmetrical constellation assignment. In a cognitive radio environment, the channel conditions change frequently. Thus it suggests the requirement for a non-linear adaptive modulation technique with variable parameters. This requirement can be met by using trellis coded modulation with asymmetrical constellation [15,16]. The approach to this thesis is to use digital modulation techniques namely M-ary Phase Shift Keying (MPSK), in combination with convolutional codes of specific code rate, and then combining these convolutional codes to a TCM mapper, and finally iii carrying out TCM encoding and decoding.
    [Show full text]