Online NC K-12 Championship Charlotte Chess Center
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Nuclear Technology
Nuclear Technology Joseph A. Angelo, Jr. GREENWOOD PRESS NUCLEAR TECHNOLOGY Sourcebooks in Modern Technology Space Technology Joseph A. Angelo, Jr. Sourcebooks in Modern Technology Nuclear Technology Joseph A. Angelo, Jr. GREENWOOD PRESS Westport, Connecticut • London Library of Congress Cataloging-in-Publication Data Angelo, Joseph A. Nuclear technology / Joseph A. Angelo, Jr. p. cm.—(Sourcebooks in modern technology) Includes index. ISBN 1–57356–336–6 (alk. paper) 1. Nuclear engineering. I. Title. II. Series. TK9145.A55 2004 621.48—dc22 2004011238 British Library Cataloguing in Publication Data is available. Copyright © 2004 by Joseph A. Angelo, Jr. All rights reserved. No portion of this book may be reproduced, by any process or technique, without the express written consent of the publisher. Library of Congress Catalog Card Number: 2004011238 ISBN: 1–57356–336–6 First published in 2004 Greenwood Press, 88 Post Road West, Westport, CT 06881 An imprint of Greenwood Publishing Group, Inc. www.greenwood.com Printed in the United States of America The paper used in this book complies with the Permanent Paper Standard issued by the National Information Standards Organization (Z39.48–1984). 10987654321 To my wife, Joan—a wonderful companion and soul mate Contents Preface ix Chapter 1. History of Nuclear Technology and Science 1 Chapter 2. Chronology of Nuclear Technology 65 Chapter 3. Profiles of Nuclear Technology Pioneers, Visionaries, and Advocates 95 Chapter 4. How Nuclear Technology Works 155 Chapter 5. Impact 315 Chapter 6. Issues 375 Chapter 7. The Future of Nuclear Technology 443 Chapter 8. Glossary of Terms Used in Nuclear Technology 485 Chapter 9. Associations 539 Chapter 10. -
Supplemental Information
ARTICLE Supplemental Information PEDIATRICS Volume 146, Number 3, September 2020 1 SUPPLEMANTAL FIGURE 3 Example individualized antibiotic prescribing feedback report used in the DART study. Amox, amoxicillin; Clav, clavulanate; Rx, prescription. 2 ARTICLE SUPPLEMANTAL FIGURE 4 aRR for antibiotic prescribing from ITT analyses of the DART primary and secondary outcomes by study phase. PEDIATRICS Volume 146, Number 3, September 2020 3 SUPPLEMANTAL TABLE 5 ICD-10 Codes Used To Define ARTI Visits Diagnosis Included Conditions ICD-10 Codesa AOM Acute serous, allergic, and H65.0n, H65.11n, H65.19n, H65.2n, nonsuppurative otitis media; chronic H65.3n, H65.41n, H65.49n, H65.9n, serous, mucoid, allergic, and H66.00n, H66.01n, H66.1n, H66.2n, nonsuppurative otitis media H66.3Xn, H66.4n, H66.9n, and/or H67.n Pharyngitis Acute pharyngitis and tonsillitis J02, J02.n, J03, J03.00, J03.8n, and/or J03.9n Sinusitis Acute maxillary, frontal, ethmoidal, J01.0n, J01.1n, J01.2n, J01.3n, J01.4n, sphenoidal, and pansinusitis J01.8n, and/or J01.9n Viral ARTIsb Common cold, upper respiratory tract J00, J06.n, J10.1, J11.1, J20.3-J20.9, infection, influenza, bronchitis, and J21.n, and/or J40 bronchiolitis Additional Central venous catheter infections, T80.2n, T88.0n, W50.3n, W53.n1Xn, bacterial infection after immunization, bites and W54.0XXn, W55.n1Xn, W56.n1Xn, infectionsc scratches, infections due to specific W58.n1Xn, W59.n1Xn, W61.n1xn, pathogens (eg, Salmonella), sexually Y04.1xxn, A01.0n, A01.n, A02.n, A03.n, transmitted diseases, neutropenia, A04.n, A18.0n, -
Worksop-Inset.Pdf
Worksop inset map 258 151 43.3m 3 41.8m 139 74 135 ANSTON AVENUE 64 4 SOUTH VIEW 125 AVENUE HARSTOFT 54 3 LB 214 115 42 PCs 31 22 105 40 Shelter 42.4m 13 Supermarket 36 32 El Sub Sta 22 44.5m 1 12 221 81 246 69 2 103 48.2m 37 57 A N S TO N A V E N U E 54 ED & Ward Bdy 52a B L Y TH G R O V E 45 41 Key 33 45.7m 29 23 CR 2 13 STANLEY STREET STANLEY 35 25 3 234 1a3a 1 11 North Nottinghamshire College Shelter 21 5 21 217 (FE) 12 New Housing (ST18) 33 52 12 43 BLYTH ROAD 53 19 222 JA M E S S TR E E T 215 1 G A TE FO R D R O A D 2 Works CR 220 8 Proposed mixed use (Policy 17) 10 54.3m 14 I Ward Bdy 25 13 SP 6 GP 1a 17 1b 208 Shelter 2 1 Committed Housing 36 3 HOLMEFIELD CLOSE HOLMEFIELD 15 43.0m S H E P H E R D 'S A V E N U E 15 2 13 CR Norbridge Academy 29 196 (Sch) 15 PERCIVAL STREET PERCIVAL 38 New Employment (ST08) 2a 24 2 203 L Twrs W52 13 8 1 3 52.4m 10 186 11 S H E P H E R D 'S A V E N U E 34 Pit 18 Wr Pt 9 Exisiting Employment (ST11) SPs 30 12 174 SP 34a M e rry -g o -ro u n d CR 168 28 Locally important openL Twr space (ST48) W ag o n D ep o t The Chestnuts 50.0m 3 El Sub Sta SP Oak Lodge Playingfield and outdoor sportsSandhole Sidings facility (ST49) TU R N E R R O A D 40.0m 20 1 LB El Sub Sta 185 78 Ward Bdy STREET 18 1b 8 CR 1a 102 183 7 Main Green Corridor (ST41) STANLEY 90 72 MP 0.5 50.6m ED Bdy BANK El Sub Sta BLYTH ROAD Turner Road 18a SUNNY ED Bdy TU R N E R R O A D 64 SP Industrial 51.8m Minor Green Corridor (ST41) Estate 18b 54 Club 47.2m 50 Ward Bdy 48.8m 63 61 53 6 50.9m ED Bdy ED & Ward Bdy Ward & ED 49 SUNNY BANK Bowling -
Discovery World 02/03/2018 TD: Bob Patterson-Sumwalt Participants 155 K12 Participants in Tournaments to Date 17 - 18 1774
Discovery World 02/03/2018 TD: Bob Patterson-Sumwalt Participants 155 K12 Participants in tournaments to date 17 - 18 1774 No. Name Pts Local Team TBrk1 TBrk2 TBrk3 Rnd1 Rnd2 Rnd3 Rnd4 Rnd5 1 KRAEMER, JOHNATHAN 5.0 1222 PIUSwa 12.0 14.0 15.0 W29 W14 W37 W16 W10 2 CHEN, ALEXANDER 4.5 1354 MEQUON15.5 18.0 14.5 W20 W4 W26 W5 D3 3 NEEB, WILL JR 4.5 1323 GOLDmi 12.5 14.5 14.5 W35 W15 W32 W13 D2 4 NEEB, EMMA 4.0 1153 GOLDmi 14.5 16.5 11.0 W6 L2 W39 W23 W19 5 SURESH, ARJUN 4.0 1155 NORTwa 14.0 16.5 13.0 W11 W25 W23 L2 W14 6 RUPLINGER, AARON 4.0 1222 FRANwe 13.0 14.5 10.0 L4 W18 W45 W22 W17 7 HARWOOD, WILLIAM 4.0 1173 MEQUON12.0 14.5 11.0 W17 L13 W25 W21 W15 8 SCHMIDT, NATHAN 4.0 1123 RIVEmi 12.0 14.5 10.0 L15 W21 W28 W18 W13 9 SHANMUGASUNDARAM, TANYA4.0 1014 NORTme 10.5 12.5 10.0 L13 W27 W38 W32 W16 10 MOLINA, MAXIMUS 3.5 968 UNITmi 14.5 16.0 12.0 W22 D11 W44 W19 L1 11 HANSEN, KEEGAN 3.5 940 GOLDmi 11.5 13.0 8.0 L5 D10 W40 W44 W35 12 PAGEL, CARSON 3.5 921 GOLDmi 10.5 12.0 8.0 L14 D44 W31 W26 W30 13 ORTIZ, DIEGO 3.0 1121 UNITmi 16.5 19.5 12.0 W9 W7 W24 L3 L8 14 MARTINEZ, GUSTAVO 3.0 973 UNITmi 15.5 16.5 10.0 W12 L1 W51 W24 L5 15 ALEXANDER, DELIA 3.0 1008 CARMEN 14.5 15.5 10.0 W8 L3 W50 W33 L7 16 VARELA, JAIRO 3.0 850 UNITmi 14.0 15.0 12.0 W53 W20 W43 L1 L9 17 MORALES, RAFAEL 3.0 948 UNITmi 13.0 15.0 9.0 L7 W28 W27 W43 L6 18 SCHESKE, WILLIAM 3.0 855 GOLDmi 12.0 12.5 9.0 W34 L6 W52 L8 W33 19 SCHOMANN, MADDOX 3.0 800 TEMPsu 11.5 13.5 12.0 W39 W34 W33 L10 L4 20 HARPER, TYRONE 3.0 906 GOLDmi 11.5 13.5 6.0 L2 L16 W41 W34 W32 21 CHAPLIN, CARTER 3.0 -
Library of Congress Classification
R MEDICINE (GENERAL) R Medicine (General) Periodicals. Societies. Serials 5 International periodicals and serials 10 Medical societies Including aims, scope, utility, etc. International societies 10.5.A3 General works 10.5.A5-Z Individual societies America English United States. Canada 11 Periodicals. Serials 15 Societies British West Indies. Belize. Guyana 18 Periodicals. Serials 20 Societies Spanish and Portuguese Latin America 21 Periodicals. Serials 25 Societies 27.A-Z Other, A-Z 27.F7 French Europe English 31 Periodicals. Serials 35 Societies Dutch 37 Periodicals. Serials 39 Societies French 41 Periodicals. Serials 45 Societies German 51 Periodicals. Serials 55 Societies Italian 61 Periodicals. Serials 65 Societies Spanish and Portuguese 71 Periodicals. Serials 75 Societies Scandinavian 81 Periodicals. Serials 85 Societies Slavic 91 Periodicals. Serials 95 Societies 96.A-Z Other European languages, A-Z 96.H8 Hungarian Asia 97 English 97.5.A-Z Other European languages, A-Z 97.7.A-Z Other languages, A-Z Africa 98 English 98.5.A-Z Other European languages, A-Z 98.7.A-Z Other languages, A-Z 1 R MEDICINE (GENERAL) R Periodicals. Societies. Serials -- Continued Australasia and Pacific islands 99 English 99.5.A-Z Other European languages, A-Z 99.7.A-Z Other languages, A-Z Indexes see Z6658+ (101) Yearbooks see R5+ 104 Calendars. Almanacs Cf. AY81.M4 American popular medical almanacs 106 Congresses 108 Medical laboratories, institutes, etc. Class here papers and proceedings For works about these organizations see R860+ Collected works (nonserial) Cf. R126+ Ancient Greek and Latin works 111 Several authors 114 Individual authors Communication in medicine Cf. -
Thierry Moreau
Compilation and Hardware Support for Approximate Acceleration Thierry Moreau, Adrian Sampson, Andre Baixo, Mark Wyse, Ben Ransford, Jacob Nelson, Hadi Esmaeilzadeh (Georgia Tech), Luis Ceze and Mark Oskin University of Washington [email protected] Theme: 2384.004 1 Thierry Moreau Approximate Computing Aims to exploit application resilience to trade-off quality for efficiency 2 Thierry Moreau Approximate Computing 3 Thierry Moreau Approximate Computing ✅ Accurate ✅ Approximate ❌ Expensive ✅ Cheap 4 Thierry Moreau 5 Thierry Moreau 6 Thierry Moreau 7 Thierry Moreau Neural Networks as Approximate Accelerators CPU Esmaeilzadeh et al. [MICRO 2012] 8 Thierry Moreau Neural Acceleration float foo (float a, float b) { AR F … NPUM P G return val; approximation acceleration } 9 Thierry Moreau Neural Acceleration compiler-support float foo (float a, float b) { AR F … NPUM P G return val; approximation acceleration } ACCEPT* *Sampson et. al [UW-TR] 10 Thierry Moreau Neural Acceleration compiler-support HW-support float foo (float a, float b) { AR F … NPUM P G return val; approximation acceleration } ACCEPT SNNAP* *Moreau et. al [HPCA2015] 11 Thierry Moreau Neural Acceleration compiler-support HW-support float foo (float a, float b) { AR F … NPUM P G return val; approximation acceleration } ACCEPT SNNAP 3.8x speedup and 2.8x efficiency - 10% error 12 Thierry Moreau Talk Outline Introduction Compiler Support with ACCEPT SNNAP Accelerator design Evaluation & Comparison with HLS 13 Thierry Moreau Compilation Overview code 1. Region detection annotation 14 Thierry Moreau Compilation Overview ACCEPT code region detection 1. Region detection & program annotation instrumentation 15 Thierry Moreau Compilation Overview ACCEPT code region detection 1. Region detection & program annotation instrumentation back prop. -
Installation and User Manual
Installation and user manual EN CLOSED WOOD FIRES DON’T COMPROMISE. Product Kalfire W Product group Wood burning fireplaces with lifting door Application Open and closed Models Kalfire W45/48F Kalfire W60/51F Kalfire W65/38C Kalfire W66/48S Kalfire W70/33F Kalfire W71/62F Kalfire W80/52T Kalfire W85/40F Kalfire W90/47C Kalfire W90/47S Kalfire W100/61F Kalfire W105/47F Kalfire W105/47T Kalfire W120/38F Version January 2018 Language English 3 4 Preface Congratulations on purchasing your Kalfire W wood burning fireplace. This manual describes the installation, daily use and maintenance of all the fireplaces from the Kalfire W series. Read this manual carefully before installing and using the fireplace. Please complete the proof of guarantee (appendix C) and keep it with the invoice to verify the purchase date. Always keep this manual close to your fireplace An authorised installer will install the Kalfire W fireplace in compliance with the national or local applicable regulations. Check the fireplace for transport damage upon delivery. Report any transport damage to the supplier immediately. The supplier cannot be held responsible for any damage because of faulty installation. In case any problems occur or if you have any questions concerning the operation of your fireplace, please contact your Kalfire dealer. Your dealer is also the person to contact during the duration of the guarantee period. Kalfire BV has installed a telephone helpdesk, to support the technical department of her dealers, to make sure your dealer will be able to advise you in a professional way. All rights reserved. Nothing from this manual may be copied, distributed or translated into other languages, partly or wholly, without prior written permission from Kalfire. -
Heater Element Specifications Bulletin Number 592
Technical Data Heater Element Specifications Bulletin Number 592 Topic Page Description 2 Heater Element Selection Procedure 2 Index to Heater Element Selection Tables 5 Heater Element Selection Tables 6 Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Resource Description Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system. Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details. You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative. For Application on Bulletin 100/500/609/1200 Line Starters Heater Element Specifications Eutectic Alloy Overload Relay Heater Elements Type J — CLASS 10 Type P — CLASS 20 (Bul. 600 ONLY) Type W — CLASS 20 Type WL — CLASS 30 Note: Heater Element Type W/WL does not currently meet the material Type W Heater Elements restrictions related to EU ROHS Description The following is for motors rated for Continuous Duty: For motors with marked service factor of not less than 1.15, or Overload Relay Class Designation motors with a marked temperature rise not over +40 °C United States Industry Standards (NEMA ICS 2 Part 4) designate an (+104 °F), apply application rules 1 through 3. Apply application overload relay by a class number indicating the maximum time in rules 2 and 3 when the temperature difference does not exceed seconds at which it will trip when carrying a current equal to 600 +10 °C (+18 °F). -
EUROPE RECEPTION T: +1 905-338-0000/ +1 888-901-3090 E: [email protected] CANADIAN DEALERSHIP PRICE 2020 Gvainteriors.Com PRICES ARE in CANADIAN DOLLARS
GVA Interiors, Inc. PRICELIST 2771 Bristol Circle, Oakville, Ontario L6H 6X5 Canada EUROPE RECEPTION T: +1 905-338-0000/ +1 888-901-3090 E: [email protected] CANADIAN DEALERSHIP PRICE 2020 gvainteriors.com PRICES ARE IN CANADIAN DOLLARS CONFIDENTIAL E: [email protected] gvainteriors.com EUROPE RECEPTION *** RECEPTION HEIGHT 1162 MM / 45.7" *** LASEREDGE BANDING TECHNOLOGY *** STRAIGHT LINE INTERMEDIATE RECEPTION DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE TOP COVER WITHOUT CUT W47.2"D29.6"H45.7" W1200 D752 H1162 193900 $ 1,151.13 a TOP CUTOUT COVER W47.2"D29.6"H45.7" W1200 D752 H1162 193904 $ 1,170.84 a ANGULAR INTERMEDIATE RECEPTION DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W47.2"D29.6"H45.7" W1200 D752 H1162 193970 $ 1,025.91 W55.1" D29.6" H45.7" W1400 D752 H1162 193972 $ 1,214.63 a TOP COVER WITHOUT CUT W47.2"D29.6"H45.7" W1200 D752 H1162 193971 $ 1,025.94 W55.1" D29.6" H45.7" W1400 D752 H1162 193973 $ 1,214.63 a DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W47.2" D29.6" H45.7" W1200 D752 H1162 193974 $ 1,041.79 W55.1" D29.6" H45.7" W1400 D752 H1162 193976 $ 1,232.69 a TOP CUTOUT COVER W47.2" D29.6" H45.7" W1200 D752 H1162 193975 $ 1,041.79 W55.1" D29.6" H45.7" W1400 D752 H1162 193977 $ 1,232.69 a STRAIGHT LINE END PART RECEPTION DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W63" D29.6" H45.7" W1600 D752 H1162 193910 $ 1,457.05 W71" D29.6" H45.7" W1800 D752 H1162 193912 $ 1,614.87 a TOP COVER WITHOUT CUT W63" D29.6" H45.7" W1600 D752 H1162 193911 $ 1,457.05 W71" D29.6" H45.7" W1800 D752 H1162 193913 $ 1,614.87 a DIMENSIONS, INCHES DIMENSIONS, MM PART NUMBER PROJECT PRICE W63" D29.6" H45.7" W1600 D752 H1162 193914 $ 1,477.80 a W71" D29.6" H45.7" W1800 D752 H1162 193916 $ 1,638.04 TOP CUTOUT COVER W63" D29.6" H45.7" W1600 D752 H1162 193915 $ 1,477.80 W71" D29.6" H45.7" W1800 D752 H1162 193917 $ 1,638.04 a GVA Interiors, Inc. -
Experience a Lower Total Cost of Ownership
EXPERIENCE A LOWER TOTAL COST OF OWNERSHIP Timken® Spherical Roller Bearings are engineered to give you more of what you need. Lower Operating Temperatures Rollers are guided by cage pockets—not a center guide ring—eliminating a friction point and resulting in 4–10% less rotational torque and 5ºC lower operating temperatures.* Less rotational torque leads to improved efficiency, lower energy consumption and more savings. Lower temperatures reduce the oil oxidation rate by 50% to extend lubricant life. Tougher Protection Hardened steel cages deliver greater fatigue strength, increased wear resistance and tougher protection against shock and acceleration. Optimized Uptime Unique slots in the cage face improve oil flow and purge more contaminants from the bearing to help extend equipment uptime. Minimized Wear Improved profiles reduce internal stresses and optimize load distribution to minimize wear. Improved Lube Film Enhanced surface finishes avoid metal-to-metal contact to reduce friction and result in improved lube film. Higher Loads Longer rollers result in 4–8% higher load ratings or 14–29% longer predicted bearing life. Higher load ratings enable you to carry heavier loads. Brass Cages Available in all sizes; ready when you need extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces, and minimal lubrication. Increase your operational efficiencies and extend maintenance intervals. Starting now. Visit Timken.com/spherical to find out more. *All results are from head-to-head -
Marine Nuclear Power 1939 – 2018 Part 1 Introduction
Marine Nuclear Power: 1939 – 2018 Part 1: Introduction Peter Lobner July 2018 1 Foreword In 2015, I compiled the first edition of this resource document to support a presentation I made in August 2015 to The Lyncean Group of San Diego (www.lynceans.org) commemorating the 60th anniversary of the world’s first “underway on nuclear power” by USS Nautilus on 17 January 1955. That presentation to the Lyncean Group, “60 years of Marine Nuclear Power: 1955 – 2015,” was my attempt to tell a complex story, starting from the early origins of the US Navy’s interest in marine nuclear propulsion in 1939, resetting the clock on 17 January 1955 with USS Nautilus’ historic first voyage, and then tracing the development and exploitation of marine nuclear power over the next 60 years in a remarkable variety of military and civilian vessels created by eight nations. In July 2018, I finished a complete update of the resource document and changed the title to, “Marine Nuclear Power: 1939 – 2018.” What you have here is Part 1: Introduction. The other parts are: Part 2A: United States - Submarines Part 2B: United States - Surface Ships Part 3A: Russia - Submarines Part 3B: Russia - Surface Ships & Non-propulsion Marine Nuclear Applications Part 4: Europe & Canada Part 5: China, India, Japan and Other Nations Part 6: Arctic Operations 2 Foreword This resource document was compiled from unclassified, open sources in the public domain. I acknowledge the great amount of work done by others who have published material in print or posted information on the internet pertaining to international marine nuclear propulsion programs, naval and civilian nuclear powered vessels, naval weapons systems, and other marine nuclear applications. -
LA Express Quick Ship Program
EXPRESS VOLUME 3 SOFAS SECTIONALS CHAIRS BEDS FABRICS FOR HICKORY WHITE LA EXPRESS: LA6258S Hinson Sofa (see page 3) 70+ Frames 100+ Fabrics 4 to 6 Week Shipping FOR IN-STOCK FABRICS Our best-selling Lillian August sofas, chairs and beds are now able to be shipped in 20 working days from date of acknowledgment. Available in our most popular Designer Select fabrics, these combinations of fabric and frame are the tried and proven top performers. Mark all orders LA EXPRESS. Note: Standard throw pillows must be in a quick ship fabric and wood finish must be in a standard finish to receive all program benefits. Click on the photo of any product for more details. LA7116S Paris Sofa (shown) Loose pillow back (two) Overall: W97 D39 H35 Inside: W87 D22 H17 Arm height: 28 Seat height: 19 Standard pillows: two 21" throw pillows Standard with #1-P nail trim, spaced as shown. Standard with casters. Available in any standard finish. LA7113S Royce Court Sofa (shown) Loose pillow back (two) ALSO AVAILABLE: Overall: W87 D37 H37 Inside: W81 D20 H19 LA7116L Paris Loveseat Arm height: 23 Seat height: 19 Loose pillow back (two) Two seat cushions Overall: W67 D39 H35 Inside: W57 D22 H17 Dressmaker skirt Arm height: 28 Seat height: 19 Standard pillows: two 21" throw pillows ALSO AVAILABLE: Standard with #1-P nail trim. LA7113M Royce Court Mid Sofa Standard with casters. Loose pillow back (two) Available in any standard finish. Overall: W77 D37 H37 Inside: W71 D20 H19 Arm height: 23 Seat height: 19 LA7116M Paris Mid-Sofa Two seat cushions Loose pillow back (two) Dressmaker skirt Overall: W87 D39 H35 Inside: W77 D22 H17 Arm height: 28 Seat height: 19 LA7113C Royce Court Chair (see page 22) Standard pillows: two 21" throw pillows Standard with #1-P nail trim.