GUIDE SPECIFICATION Section 27 21 29 Polre

Total Page:16

File Type:pdf, Size:1020Kb

GUIDE SPECIFICATION Section 27 21 29 Polre GUIDE SPECIFICATION Section 27 21 29 NVT Phybridge enables our customers to transform their existing infrastructure and migrate to IP with confidence. NVT Phybridge products offer technologically advanced features including power over long reach Ethernet over single pair or multi pair UTP and COAX, robust power and power management, PowerWISE power sharing and quick and easy migration to IP end points and IoT. Complete switch solutions include PoLRE, CLEER and FLEX products. Complete adapter solutions include PhyLink, EC-LINK, EC-04, FLEX-Base, FLEX-Link, FLEX-Link-C and FLEX4 media converters and cable extenders. For additional information, contact: NVT Phybridge, Inc. 3457 Superior Court, Unit 3 Oakville, ON, L6L 0C4 Phone: +1 905 901 3633 Web: www.nvtphybridge.com E-mail: [email protected] POWER OVER LONG REACH ETHERNET ADAPTER DIVISION 27 – COMMUNICATIONS 27 20 00 Data Communications 27 21 00 Data Communications Network Equipment 27 21 29 Switches & Hubs Notes to Specifier: 1. Where several alternative parameters or specifications exist, or where, the specifier has the option of inserting text, such choices are presented in <bold text>. 2. Explanatory notes and comments are presented in coloured text. PoLRE Phylink Power over Long Reach Ethernet Oct 2017 27 21 29 - 1 GUIDE SPECIFICATION Section 27 21 29 POWER OVER LONG REACH ETHERNET ADAPTER PART 1 GENERAL 1.01 SUMMARY A. Section includes an 1-port 10Mbps Ethernet-over-CAT3 UTP adapter with power pass- through capability. B. Product – The Phylink (Part code: NV-PL-PA011-6 – pack of 6) Adapter delivers Ethernet and Power over CAT3 UTP cable with multiple times the reach of traditional data switches. C. Related Requirements (1) 27 10 00 Structured Cabling (2) 27 16 00 Communications Connecting Cords, Device, and Adapters (3) 27 16 16 Communications Media Converters, Adapters, and Transceivers (4) 27 30 00 Voice Communications (5) 27 31 23 IP Voice Switch 1.02 REFERENCES A. Abbreviations (1) CLEER – Coax Leveraged Ethernet Extended Reach (2) DVR – Digital Video Recorder (3) GbE – Gigabit Ethernet (4) GBIC – GigaBit Interface Converter (5) GUI – Graphical User Interface (6) IoT – Internet of Things (7) IP – Internet Protocol (8) LAN – Local Area Network (9) LLDP – Link Layer Discovery Protocol (10) Mbps – Megabits per second (11) NTP – Network Time Protocol (12) NVR – Network Video Recorder (13) PoE – Power over Ethernet (14) PoLRE – Power over Long Reach Ethernet (15) SFP – Small Form-factor Pluggable (16) SNMP – Simple Network Management Protocol (17) STP – Spanning Tree Protocol (18) VLAN – Virtual LAN B. Reference Standards (1) Network (a) IEEE – 802.3 Ethernet Standards (2) EMC (a) Emissions (i) FCC-47 CFR Part 15 Class B (ii) ICES-003 (iii) EN 55032:2012 (b) Immunity PoLRE Phylink Power over Long Reach Ethernet Oct 2017 27 21 29 - 2 GUIDE SPECIFICATION Section 27 21 29 (i) EN 55024:2010 (3) Safety (a) UL 60950-1 2nd Ed 2014-10-14 (b) CSA C22.2 No. 60950-1-07 2nd Ed 2014-10 (c) IEC 60950-1:2005 + A1 + A2 (d) EN 60950-1:2006 + A11 + A12 + A1 + A2 (e) AS/NZS 60950-1:2011 1.03 SUBMITTALS A. Product data (1) Data sheets (2) Installation and operation manuals (3) DoC (declaration of conformity) (4) Warranty documentation 1.04 QUALIFICATIONS A. Manufacturer shall have a minimum of five years’ experience in producing Ethernet switch equipment. B. Installers shall be trained and authorized by the Manufacturer to install, integrate, test and commission the system. 1.05 DELIVERY, STORAGE AND HANDLING A. Deliver the switch in the manufacturer’s original, unopened, undamaged container with identification labels intact. B. Store the switch in a temperature environment of -40°C to 85°C (-104°F to 185°F), protected from mechanical and environmental conditions as designated by the manufacturer. 1.06 WARRANTY AND SUPPORT A. Manufacturer shall provide a limited 5 year warranty for the product to be free of defects in material and workmanship. END OF SECTION PoLRE Phylink Power over Long Reach Ethernet Oct 2017 27 21 29 - 3 GUIDE SPECIFICATION Section 27 21 29 PART 2 PRODUCTS 2.01 EQUIPMENT A. Manufacturer: NVT Phybridge, Inc. 3457 Superior Court, Unit 3 Oakville, ON, Canada L6L 0C4 Phone: +1 905 901-3633 Web: www.nvtphybridge.com E-mail: [email protected] B. Models NV-PL-PA011-6 (pack of 6) C. Alternates: None 2.02 GENERAL DESCRIPTION A. The Power over Long Reach Ethernet Phylink Adapter shall provide Ethernet and PoE over single pair UTP cable with up to five times the reach of traditional data switches. B. The Phylink Adapter shall possess the following characteristics: (1) capable of delivering up to 15W of PoE to 1 IP end-point (2) pairs with an NV-PL-024, NV-PL-048 or NV-PL-08 to operate as a layer 2 unmanaged network switch (3) converts conventional Ethernet to a signal that can be carried by a single pair UTP cable (4) uses previously installed UTP cable to connect IP network end-points such as IP cameras, IP phones, network switches, DVR/NVRs, PCs, and printers 2.03 INTERFACES A. Ethernet (Downlink) (1) One Ethernet RJ45 connector. This connection support a standard Ethernet cable: patch or crossover Cat5e/Cat6. (2) The RJ45 shall support 10 BaseT full or half duplex and auto-negotiation of the transmission rate. B. CAT3 UTP (1) The Phylink Adapter shall have one (1) RJ11 socket. It supports CAT3 UTP cable with a characteristic impedance of 100 ohms. (2) Maximum cable distances are specified as: 365m (1200ft) for CAT3 UTP, 24 AWG (3) The maximum data through-put shall be 20Mbps (total up plus down) and shall auto adapt to the cable conditions. This will support 10Mbps communication in both directions. (4) There shall be no signal degradation from 0m to the maximum supported distances. 2.04 INDICATORS A. Ethernet Downlink (1) The Ethernet downlink RJ45 port shall have two LEDs to indicate network connection status: Link status to PoLRE switch (left - green) and Link status to IP end-point (right – green). (2) The Link status to PoLRE switch LED indicates the following: Off – no connection, On – link good, Blinking – data transmission. PoLRE Phylink Power over Long Reach Ethernet Oct 2017 27 21 29 - 4 GUIDE SPECIFICATION Section 27 21 29 (3) The Link status to IP end-point LED indicates the following: Off – no connection, On – link good, Blinking – data transmission. 2.05 PoE A. The PoLRE shall provide up to 15 watts of power over the CAT3 UTP connection to each end- point device. B. The end-point devices must be IEEE 802.3af compliant. 2.06 ELECTRICAL A. Power (1) Sources (a) The Phylink Adapter can only accept power from an NV-PL-08, NV-PL-024 or NV-PL- 048. The power provided is 48-56VDC up to 15W. (2) Power consumption (a) 0.9W (not including PoE end-points) (3) Power injection (PoE) (a) -54VDC, 15W – end-point devices must be IEEE 802.3af compliant B. Connectors (1) Ethernet (a) RJ45 (1) – Ethernet downlink port (b) RJ11 (1) – Ethernet + power connection port 2.07 MECHANICAL AND ENVIRONMENTAL A. Housing material: Plastic B. Mounting None C. Dimensions (H x W x D): 0.71in. x 1.1in. x 2.56in. (18mm x 28mm x 65mm) D. Weight: 22g E. Thermal: Air cooled F. Temperature (1) Operating: 0°C to 40°C (32°F to 104°F) (2) Storage: -40°C to 85°C (-40°F to 185°F) G. Humidity: 10 – 95%, non-condensing @ 35°C H. MTBF (Mean Time Between Failure): 81 Years (709,560 Hours) END OF SECTION PoLRE Phylink Power over Long Reach Ethernet Oct 2017 27 21 29 - 5 GUIDE SPECIFICATION Section 27 21 29 PART 3 EXECUTION 3.01 INSTALLERS A. Contractor personnel 3.02 PREPARATION A. The network design and configuration shall be verified for compatibility and performance with the camera(s) B. Network configuration shall be tested and qualified by the Contractor prior to camera installation. 3.03 INSTALLATION A. Before permanent installation of the system, the system shall be factory tested in conditions simulating the final installed environment (1) A report indicating successful test results shall be produced. 3.04 STORAGE A. The product shall be stored in an environment where temperature and humidity are in the range specified by the Manufacturer. END OF SECTION PoLRE Phylink Power over Long Reach Ethernet Oct 2017 27 21 29 - 6 .
Recommended publications
  • Lrp-101U-Kit Lrp-101U-Kit
    LRP-101U-KIT LRP-101U-KIT Long Reach PoE over UTP Extender Kit PoE over Long UTP • Eliminates power cabling with PoE over UTP • Supports Power over Ethernet PSE (PoE Injector) • Power and Ethernet data transmission of 500m over UTP cabling • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet PD on RJ45 port • Supports Long Reach PoE power up to 30.8 watts (depending on power source and cable distance) • Supports PoE Power up to 25 watts (depending on power source and cable distance) PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and • Auto detects remote powered device (PD) inject power simultaneously into a remote 802.3af/at PoE compliant powered device • Plug and Play; no PC required (PD) beyond the 100 meters distance limit of Ethernet. Industrial Case and Installation Convenient PoE over UTP Extender in Harsh Environment • Supports extensive LED indicators for network diagnostics The LRP-101U-KIT, a PLANET Long Reach PoE solution, is a Single-port PoE over • Metal case protection UTP Extender Kit featuring long range data and power transmission for distance up to • Compact size, DIN-rail and wall-mount design 500m (1,640ft.) over UTP cable, and another 100m over Ethernet cable to remote PoE • Supports EFT surge protection of 2kV DC for power line IP camera, PoE wireless AP or access control systems complied with 802.3af/at PoE. • Supports Ethernet ESD protection of 4kV DC The LRP-101U-KIT provides point to point application for easy plug-n-play operation • -20 to 70 degrees C operating temperature and deployment in climatically demanding environments with wide temperature range from -20 to 70 degrees C.
    [Show full text]
  • Soluzioni LRE (Long Reach Ethernet)
    Data Sheet Soluzione Cisco Systems Long Reach Ethernet La soluzione di networking Cisco Inoltre, Cisco LRE supporta modalità Systems Long Reach Ethernet (LRE) compatibili con ADSL (Asymmetric offre un accesso a banda larga, redditi- Digital Subscriber Line) e consente ai zio e ad alte prestazioni, ad edifici di service provider di portare la soluzione tipologia diversificata (alberghi, residen- LRE negli edifici in cui sono già disponi- ce [MDU, multidwelling unit], centri bili i servizi a banda larga. direzionali [MTU, multitenant unit]) e ad ambienti di campus enterprise La soluzione Cisco LRE comprende gli come le strutture produttive, formative switch Cisco Catalyst® 2900 LRE XL, e sanitarie. i dispositivi Cisco 575 LRE e Cisco 585 La tecnologia Cisco LRE estende marca- LRE CPE (Customer Premise tamente Ethernet, sui cablaggi esistenti Equipment) ed il Cisco POTS Splitter di Categoria 1/2/3, con velocità da 5 a LRE 48. 15 Mbps (full duplex), fino a distanze di La soluzione Cisco Long Reach Ethernet 1,5 chilometri (le velocità di trasmissio- offre tutto quanto è necessario per una ne dei dati effettivamente raggiungibili rapida implementazione di una rete basa- dipendono dalla qualità del cavo, dalle ta su Ethernet con prestazioni adatte per interferenze e dall’ambiente telefonico la fornitura di un accesso a Internet ad parallelo). La tecnologia Cisco LRE alta velocità a distanze ancora maggiori offre il servizio a banda larga sulle linee e di servizi come la telefonia IP e lo utilizzate dal POTS (Plain Old streaming audio/video. Telephone Service), dalla telefonia digi- La tecnologia permette a numerosi clienti tale e dal traffico ISDN.
    [Show full text]
  • Ethernet to the Field Future Solution for Process Automation and Instrumentation in Remote and Hazardous Locations a Cooperation Between
    Ethernet to the Field Future solution for process automation and instrumentation in remote and hazardous locations A cooperation between: Developments are underway to realize an Advanced Physical Layer (APL) for Ethernet that can be used in process automation and instrumentation to connect field devices in remote and hazardous locations. Ethernet to the Field is a vision driven by new technological developments, such as the Industrial Internet of Things and the German Industrie 4.0 initia- tive. Both have introduced new paradigms to enable applications based on FUNCTIONS AND digital real-time representations of virtually any object. Existing field devices FEATURES OF ETHERNET typically rely on limited fieldbus network infrastructures that hinder the TO THE FIELD implementation of highly data intensive applications. Taking process indus- tries into the future requires a new network standard that is able to transfer • Ethernet-based, for any process data from instruments to communication systems with the speed protocol or application and flexibility of standard Ethernet and IP technologies. • Power and data over a The realization of this vision began in 2011, when a group of solution shielded twisted pair line suppliers at the urging of several end user groups began a technical investi- gation of a protocol-neutral, advanced physical layer (a.k.a., APL) that could solve the longtime problem of a long-reach Ethernet for use in hazardous • Any method of locations. The results of this five-year investigation proved the feasibility of hazardous area a solution for this problem and also generated interest in an industry-wide protection especially solution based on IEEE Ethernet standards.
    [Show full text]
  • Cleer-Ec-Brochure-4Pg-V2
    MOVE TO IP WITH CONFIDENCE Eliminating Infrastructure Barriers to IP Camera Adoption The Phybridge CLEER & EC Switches Fast Ethernet & PoE over Coax with Five Times the Reach of Traditional Switches Analog to IP Cameras Made Cost Effective, Simple, and Robust Move to IP Cameras With Confidence Camera intelligence, multi point communications, video compression and HD quality are some of the reasons organizations want to upgrade to IP cameras and IP video surveillance. One of the biggest barriers is building an IP platform that can mirror the robustness of the existing coax point-to-point infrastructure. Latency sensitive video streaming combined with long reach requirements impose additional layers of complexity and costs. Best practices dictates that a separate network should be established for IP Cameras. The Phybridge CLEER (Coax Leveraged Ethernet Extended Reach) & EC (Ethernet over Coax) switches not only eliminate infrastructure barriers and challenges, they also deliver the ideal robust platform that is cost effective, simple to deploy and simple to manage. Now you can move to IP cameras with confidence. 48VDC Local Power Optional PoE EC Link IP Camera Data Monitor PoE PoE IP Access EC Link Data Data Point NVR 2 Phybridge 24 Port CLEER Switches Exisng Coax Infrastructure Switch 100mbs PoLRE with 2,000 (609m) Reach Server (Power over Long Reach Ethernet) PoE PoE EC Link IP Phone Data Data The Most Robust PoE Capabilities on the Market Four switches can be stacked together for power sharing, load balancing and power redundancy. The CLEER switch PoE PoE comes standard with PowerWISE technology. EC Link IP TV Data Data The Phybridge CLEER and EC Switches Deliver Fast Ethernet and PoE over Coax Infrastructure with Five Times the Reach of Traditional Switches CLEER and EC switches transform the existing coax infrastructure into an IP path with power ideal for IP camera deployments.
    [Show full text]
  • FTTH and FTTB Network Architectures – a Little History
    Do you have the bandwidth to attract and keep residents? Broadband at the speed of fi ber-optic light. Streaming video and interactive gaming that defy description. The coolest programming, and more of it, on the purity of HDTV. Pure joy. This is what today’s residents demand. And this is what you can give them with Verizon FiOS®, the most advanced TV, Internet and phone service available. Set up by our own experts, who will create a custom installation plan just for you. Verizon FiOS. It’s a clear signal to today’s residents that you get it. Call 888.376.3608 or go to verizon.com/communities to learn more. Verizon FiOS tv | internet | phone verizon.com/communities 888.376.3608 FiOS available in select areas only. Battery backup for standard fi ber-based voice service and E911 (but not VoIP) for up to 8 hours. ©2009 Verizon. All rights reserved. 214-120_MDU_7.875x10.75.indd 1 3/20/09 3:04:51 PM More U.S. service providers deploy Calix FTTP solutions... 264 Enablence/Pannaway 43 Occam Networks 26 Alloptic 13 Motorola 12 Allied Telesis 9 Alcatel-Lucent 8 Zhone 5 Ericsson 4 Hitachi 3 Tellabs 3 Adtran 2 PacketFront 1 Telco Systems 1 Ciena 1 0 50 100 150 200 250 300 (Broadband Properties, March 2009) ...than all other vendors combined. Why? Innovation: A portfolio of practical solutions. Experience: The leader in FTTP deployments. Service: Unrivalled customer advocacy and support. PRESIDENT’S LETTER At a Pivotal Moment, Digital Momentum EDITORIAL DIRECTOR Scott DeGarmo Stay tuned-in to BBP Online for PUBLISHER Nancy McCain hot new stuff [email protected] EDITOR IN CHIEF ur Summit makes April a pivotal What’s different about the way they are Steven S.
    [Show full text]
  • Final Report
    Ref. Ares(2013)3009628 - 09/09/2013 WING Watching IST Innovation and Knowledge Framework Contract For Impact Analysis Contract No.30-CE-0029513/00-42 Funded by European Commission Information Society and Media Directorate General Specific Contract No 30-CE-0112232/00-65 Impact Analysis in the Domain of Broadband Technologies (BBT) Final report April 14, 2008 This report has been produced by the WING consortium with contributions from: Gianmarco Panza, Cefriel Valérie Chaillou, IDATE Didier Pouillot, IDATE Bea Mahieu Ballero, Databank Marina Suardi, Databank Franco Morganti, Databank The opinions expressed in this study are those of the authors and do not necessarily reflect the views of the European Commission Table of Contents 1 INTRODUCTION TO THE BROADBAND DOMAIN .................................................................................... 13 1.1 Methodological Framework ..............................................................................................................13 1.2 Structure of the Report........................................................................................................................14 1.3 Broadband Domain Strategic Objectives ......................................................................................15 1.3.1 Introduction................................................................................................................... 15 1.3.2 High Level Objectives of IST-RTD ................................................................................. 16 1.3.3 High
    [Show full text]
  • Actelis Networks® ML1300
    ® ActelisActelis Networks Networks ML1300ML1300 Carrier Ethernet over Copper™ Carrier Ethernet Over Copper™ Highlights The ML1300 is an Ethernet in the First Mile (EFM) Small form factor ports accept standard aggregation switch, delivering symmetrical 100Base-FX, 1000Base-FX, 1000Base-T • IEEE 802.3ah Ethernet in the First Ethernet services to remote subscribers over and T3/E3 modules, providing redundant Mile (EFM) 2Base-TL Solution multiple voice-grade copper pairs within the uplinks to Ethernet and SONET/SDH customer service area. The ML1300 allows networks. • MEF Certified Ethernet Capabilities service providers and enterprises to use the existing copper infrastructure to deliver up to Implementing the standard IEEE 802.3ah- • Rapid Service Deployment 100 Mbps of Ethernet service per customer. 2004 EFM long-reach Ethernet-over- It achieves unprecedented rate, reach and Copper specification, the ML1300 bonds • Superior Rate, Reach & Reliability reliability on any grade of available copper and up to 8 copper pairs together to create installs within minutes, enabling immediate a 2Base-TL aggregated link. Powered • Low Delay and Jitter for Voice and deployment of broadband services. The ML1300 by Actelis Networks® award-winning Video Transmission is interoperable with any standard Ethernet EFMplus™ technology, the rate, reach switch or router. Aligned with Metro Ethernet and reliability are increased significantly • Worldwide Spectral Compliancy Forum (MEF) recommendations, Actelis using advanced Dynamic Spectrum • OSMINE, NEBS III, FCC, UL, CE Networks® systems seamlessly integrate into Management (DSM) and Dynamic carrier Ethernet networks. Spectral Shaping (DSS) techniques. • Environmentally Hardened Architecturally, the ML1300 platform serves as a The ML1300 supports current and central office aggregator in a Point-to-Multipoint evolving Ethernet Quality of Service (QoS) Applications topology, connecting to multiple ML600 Ethernet and Type of Service (ToS) requirements, Access Devices (EADs).
    [Show full text]
  • Network Processors the Morgan Kaufmann Series in Systems on Silicon Series Editor: Wayne Wolf, Georgia Institute of Technology
    Network Processors The Morgan Kaufmann Series in Systems on Silicon Series Editor: Wayne Wolf, Georgia Institute of Technology The Designer’s Guide to VHDL, Second Edition Peter J. Ashenden The System Designer’s Guide to VHDL-AMS Peter J. Ashenden, Gregory D. Peterson, and Darrell A. Teegarden Modeling Embedded Systems and SoCs Axel Jantsch ASIC and FPGA Verification: A Guide to Component Modeling Richard Munden Multiprocessor Systems-on-Chips Edited by Ahmed Amine Jerraya and Wayne Wolf Functional Verification Bruce Wile, John Goss, and Wolfgang Roesner Customizable and Configurable Embedded Processors Edited by Paolo Ienne and Rainer Leupers Networks-on-Chips: Technology and Tools Edited by Giovanni De Micheli and Luca Benini VLSI Test Principles & Architectures Edited by Laung-Terng Wang, Cheng-Wen Wu, and Xiaoqing Wen Designing SoCs with Configured Processors Steve Leibson ESL Design and Verification Grant Martin, Andrew Piziali, and Brian Bailey Aspect-Oriented Programming with e David Robinson Reconfigurable Computing: The Theory and Practice of FPGA-Based Computation Edited by Scott Hauck and André DeHon System-on-Chip Test Architectures Edited by Laung-Terng Wang, Charles Stroud, and Nur Touba Verification Techniques for System-Level Design Masahiro Fujita, Indradeep Ghosh, and Mukul Prasad VHDL-2008: Just the New Stuff Peter J. Ashenden and Jim Lewis On-Chip Communication Architectures: System on Chip Interconnect Sudeep Pasricha and Nikil Dutt Embedded DSP Processor Design: Application Specific Instruction Set Processors Dake Liu Processor Description Languages: Applications and Methodologies Edited by Prabhat Mishra and Nikil Dutt Network Processors Architecture, Programming, and Implementation Ran Giladi Ben-Gurion University of the Negev and EZchip Technologies Ltd.
    [Show full text]
  • Poe Connections (In Far Places) Made Simple
    PoE Connections (in Far Places) Made Simple Business Communications Security & Surveillance IP Building Controls FLEX 2 or 4 Pair UTP CLEER Coax by NVT Phybridge Industry-Leading Long Reach P E Switches PoLRE 1 Pair UTP MANAGED & UNMANAGED POE SWITCHES & POE EXTENDERS POWER OVER LONG REACH ETHERNET OVER SINGLE OR MULTI PAIR UTP & COAX ENTERPRISE GRADE FEATURES & CAPABILITIES ROBUST POWER & POWER MANAGEMENT FEATURES SIMPLE NETWORK MANAGEMENT INTERFACE TWO FIBER & TWO ETHERNET GIGABIT UPLINK PORTS IP MIGRATION MADE QUICK, EASY & COST-EFFECTIVE Reach, Power, Management by NVT Phybridge The world is rapidly moving to the Internet of Things (IoT). For the communications and physical security industries this means delivering the required power and connectivity to support IP-based devices. The ability to implement these two critical requirements, however, has presented customers with challenges and barriers to IoT adoption. NVT Phybridge has the solutions. Our CHARIoT Series of long reach Power over Ethernet (PoE) switches enable our customers to transform their existing or new infrastructure and migrate to IP with confidence. Enabling IP devices is quick, easy and cost-effective with our solutions. Benefits include: • Accelerating your return on investment with reduced infrastructure costs • Collapsing migration planning and deployment times • Eliminating infrastructure barriers, risks, disruption and costs • Creating a robust IP platform that is easy to configure, deploy and manage NVT Phybridge Long Reach PoE Switches PoLRE 24-port, 48-port
    [Show full text]
  • 1-Port 10/100/1000T Ethernet to VDSL2 Converter W/ G.Vectoring
    VC-231G 1-Port 10/100/1000T Ethernet to VDSL2 Converter w/ G.vectoring • ITU-T G.993.5 G.vectoring and G.INP • DMT-based coding technology • Built-in POST splitter to share voice and date • CO/CPE mode selectable via DIP switch • Selectable target band plan and SNR margin • Up to 150/150Mbps bandwidth (in G.INP, Sym, 8dB mode) 150/150Mbps Downstream/Upstream, High Performance Gigabit Ethernet over Phone Wire Solution • 1 10/100/1000BASE-TX LAN ports. PLANET VC-231G, a new-generation and high-performance Gigabit Ethernet- • Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, over-VDSL2 Converter, works well with a pervasive telephone line network with a symmetric data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance 100BASE-TX and IEEE 802.3x, flow control Ethernet of 300m and 22/10Mbps over a long distance of 1.4km. It is based on the two- core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate standards Digital Subscriber Line 2). The VDSL2 technology offers absolutely the fastest data • Half duplex back pressure and IEEE 802.3x full duplex pause transmission speed over the existing copper telephone lines without the need of rewiring. frame flow control High-performance Ethernet over VDSL2 • One RJ11 connector for VDSL port with VDSL connection Via the latest VDSL2 technology, PLANET VC-231G offers high-speed access to • Voice and data communication can be shared simultaneously Internet, up to 190Mbps for both upstream and downstream data transmissions. With integrated support for the ITU-T’s new G.993.5 vectoring technology, the based on the existing telephone wire VC-231G works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper • IEEE 802.1Q VLAN tag transparency infrastructure.
    [Show full text]
  • VDTU2-B110 VDSL2 Ethernet Bridge
    R VDSL2 Ethernet Bridge Version 2021 Mar. VDTU2-B110 VDSL2 Ethernet Bridge VDTU2-B110 Ethernet Extender is a high-speed Ethernet Extender with one Ethernet port (RJ-45 connector) and one VDSL port (RJ-45 connector). It is a bridge mode modem, well accommodating VDSL2 (Very-high-data-rate Digital Subscribe Loop) technology to extend Ethernet service over single-pair phone line. It is compliant to ITU-T G.993.2 standard and supports VDSL2 30a profile that features 100Mbps of symmetric data rate over the existing copper wires. Supporting both symmetric and asymmetric transmission, it can reach up to 100/100 Mbps bandwidth (line rate) within 300M or 10/10 Mbps (line rate) for 1 Km long range connections. By providing ultra-high speed, 13 VDTU2-B110 Ethernet Extender makes your telephone line achieve its best performance than before. It has the advantage of minimum installation time (simply as plug-n-play) and minimum expense by allowing video streaming and data to share the same telephone pair without interference. VDTU2-B110 Ethernet Extender delivers everything needed to quickly deploy a high-speed IP-based network for providing high-speed VDSL2 Ethernet Bridge Internet access, video-on demand services and voice services. The resulting compact, cost-effective form factor offers Systems Integrators, small business owners an attractive Long Reach Ethernet solution. Features ▪ Cost effective bridge function to connect two Ethernet LAN ▪ Selectable VDSL2 profile mode (17a or 30a): Support up to ▪ Supports flow control on Fast Ethernet port via PAUSE frame VDSL2 30a profile to ensure high data rate. or Back Pressure ▪ Selectable target band plan: ▪ IEEE 802.1Q VLAN tag transparent Symmetric: Support the band plan G.997 and provide the ▪ Easy installation via simple plug-and-play symmetric transmission on both downstream and upstream.
    [Show full text]
  • The Book of PF Is the PETER N.M
    With a foreword by BUILDBUILD THETHE BOB BECK, NETWORKNETWORK YOUYOU Director of NEEDNEED WITHWITH PFPF the OpenBSD Foundation THETHE BOOKBOOK THE BOOK OF PF OF THE BOOK THE BOOK OF PF OF THE BOOK OpenBSD’s stateful packet filter, PF, offers an amazing • Use PF to create a wireless access point, and lock it OFOF PFPF feature set and support across the major BSD platforms. down tight with authpf and special access restrictions A NO-NONSENSE GUIDE TO THE Like most firewall software though, unlocking PF’s full • Maximize availability by using redirection rules for potential takes a good teacher. OPENBSD FIREWALL load balancing and CARP for failover Peter N.M. Hansteen’s PF website and conference • Use tables for proactive defense against would-be tutorials have helped thousands of users build the attackers and spammers networks they need using PF. The Book of PF is the PETER N.M. HANSTEEN product of Hansteen’s knowledge and experience, • Set up queues and traffic shaping with ALTQ, so your teaching good practices as well as bare facts and network stays responsive software options. Throughout the book, Hansteen • Master your logs with monitoring and visualization, emphasizes the importance of staying in control by because you can never be too paranoid having a written network specification, using macros to make rule sets more readable, and performing rigid The Book of PF is written for BSD enthusiasts and network testing when loading in new rules. admins at any level of expertise. With more and more services placing high demands on bandwidth and Today’s system administrators face increasing challenges increasing hostility coming from the Internet at large, you in the quest for network quality, and The Book of PF can can never be too skilled with PF.
    [Show full text]