® ActelisActelis Networks Networks ML1300ML1300

Carrier over Copper™ Over Copper™ Highlights The ML1300 is an Ethernet in the First Mile (EFM) Small form factor ports accept standard aggregation switch, delivering symmetrical 100Base-FX, 1000Base-FX, 1000Base-T • IEEE 802.3ah Ethernet in the First Ethernet services to remote subscribers over and T3/E3 modules, providing redundant Mile (EFM) 2Base-TL Solution multiple voice-grade copper pairs within the uplinks to Ethernet and SONET/SDH customer service area. The ML1300 allows networks. • MEF Certified Ethernet Capabilities service providers and enterprises to use the existing copper infrastructure to deliver up to Implementing the standard IEEE 802.3ah- • Rapid Service Deployment 100 Mbps of Ethernet service per customer. 2004 EFM long-reach Ethernet-over- It achieves unprecedented rate, reach and Copper specification, the ML1300 bonds • Superior Rate, Reach & Reliability reliability on any grade of available copper and up to 8 copper pairs together to create installs within minutes, enabling immediate a 2Base-TL aggregated link. Powered • Low Delay and Jitter for Voice and deployment of broadband services. The ML1300 by Actelis Networks® award-winning Video Transmission is interoperable with any standard Ethernet EFMplus™ technology, the rate, reach switch or router. Aligned with and reliability are increased significantly • Worldwide Spectral Compliancy Forum (MEF) recommendations, Actelis using advanced Dynamic Spectrum • OSMINE, NEBS III, FCC, UL, CE Networks® systems seamlessly integrate into Management (DSM) and Dynamic carrier Ethernet networks. Spectral Shaping (DSS) techniques. • Environmentally Hardened Architecturally, the ML1300 platform serves as a The ML1300 supports current and central office aggregator in a Point-to-Multipoint evolving Ethernet Quality of Service (QoS) Applications topology, connecting to multiple ML600 Ethernet and Type of Service (ToS) requirements, Access Devices (EADs). Each ML600 EAD or and has the highest available packet • Transparent LAN Service ML130 can be connected to the ML1300 via a throughput efficiency. High Speed Link (HSL) comprised of 1-8, or 1- • Fast Internet Access 32, bonded copper pairs, respectively. A number The ML1300 provides 802.1q VLAN- Metro Ethernet Extension of ML1300 shelves can be stacked in a star or aware wire-speed bridging, double • ring topology, providing higher port density per tagging (VLAN stacking) for end-user • Private Campus Network uplink. VLAN transparency, L2 (Ethernet priority) Intra-Connection and L3 (ToS/DiffServ) classification with The ML1300 provides two Service Dispatcher eight hybrid scheduled traffic classes, • WiFi and Cellular Backhaul (Radio Unit (SDU) slots and four Multi-port Line Unit RSTP/STP, bandwidth monitoring, HSL Access Network) (MLU) slots, allowing incremental service rate limiting and Link Aggregation (LAG) growth, equipment redundancy and flexible on all Ethernet ports. • MDU/MTU Backhaul allocation (any modem to any HSL) using pluggable cards. A variety of SDU and The ML1300 can be managed In-Band • DSLAM Backhaul MLU cards exist, supporting different numbers and Out-of-Band by Actelis’ MetaASSIST™ of Ethernet and up to 128 ports, either View graphical craft application and via our Markets Served using the MLU-16N line unit (116 G.SHDSL.bis multiplatform Element Management System, modems per card) or using the MLU-32EF line MetaASSIST EMS. The management • RBOCs, PTTs, Alternative unit 32 .SSHDSL.bis modems per card). protocols include standard TL1 command Carriers and IOCs line interface and SNMP using standard The ML1300, equipped with MLU-32EF cards, MIBs for seamless integration with third-party • Federal, State and Municipalities may also use up to 4 repeaters in a span across Network Management Systems. up to 64 pairs per system using XR239 EFM • Education, Health Care, Utilities, Repeaters to increase the loop length and by Private Campuses using up to 8 concatenated remote powering units, PFU-8 or PFU-8E. Note: 4 repeaters per span requires double-sided feeding when using the PFU-8E as the remote powering unit. ML1300 Specifications System Card • Modem Line Cards 4 (MLU-16N), 2 (MLU-32EF) • Active • Status • Max. Copper Pairs 64 • ACT (Activity) • LNK (Link) per Ethernet port • End-to-end Delay 2-4 ms (typical) Management Product Interfaces Protocols Ethernet (Network/User) • SNMP SNMP v1 and v2c • 10/100Base-T 2 ports • Command Line Interface TL1 Connector: RJ45, Auto-MDIX • Remote Access Telnet • 10/100/1000Base-T (option) 2 ports • Secure Access (option) SSH v2 Connector: RJ45, Auto-MDIX • Time Synchronization SNTP v3 • 100/1000Base-FX (option) 2 ports • Web Access HTTP Connector: SFP based, MSA compliant • File transfer FTP, TFTP • EFM OA&M IEEE 802.3ah High Speed Link (Bonded Copper Pairs) • CFM IEEE 802.1ag • Max HSLs 32 • Protocol IEEE 802.3ah 2Base-TL Applications • Linecode ITU-T G.991.2 rev. 2 • EMS MetaASSIST EMS • Bandwidth per HSL 1-100 Mbps (symmetrical) • Craft GUI MetaASSIST View • Copper Pairs per HSL 1-32 Connector: 50-pin telco rear access for MLU- Physical 16N and 2x50-pin telco front access • Mounting Rack: 19”, 23” or ETSI front access racks for MLU-32EF • Dimensions Height: 7” / 176mm (4U) or 10.8” / 274mm • Spectral Compliancy ITU-T G.991.2 (Annex A,B,F,G) (ETSI chassis) ETSI TS 101 524 (Annex E) Depth: 12” / 305mm or 11” / 280mm ANSI T1.417, T1.426 (ETSI chassis) NICC ND1602 (ANFP) Width: 21.32” / 538mm or 17.2” / 436mm BIPT BRUO 2005 (19” and ETSI chassis) • Sealing (Wetting) Current 48V/4mA nominal (1.5mA nominal • Weight 19lbs / 8.6 Kg (chassis only) or for MLU32-EF) 16.75lbs / 7.6Kg or (19” and ETSI • TDR MLU-32EF chassis) • Plug-in Cards 6 horizontal, front loading Management (Out-of-Band) • Power DC: -48/-60 VDC nominal, dual A+B • 10/100Base-T 110 Watt for minimal system Connector: RJ45, Auto-MDIX 205 Watt for fully loaded system • Craft EIA RS-232 (DCE) Environmental Connector: DB9 • Operating Temp. -40° to +65°C • Dialup Modem EIA RS-232 (DTE) • Storage Temp. -40° to +70°C Connector: DB9 • Relative humidity Up to 95%, non-cond. • Alarm Contacts 4 Input; 4 Output Connector: DB15 and Wire-wrap Regulatory Approval/Certifications Metro Ethernet Forum External Loop Test • MEF 9, 14 • RLM-16MT 2 RJ45 connectors for external metallic loop testing (MLU-16N Safety only) allows any copper pair to be • UL 60950, CSA C22.2 60950 connected to the MLT test port • EN 60950, IEC 60950 LAN Protocols • Dynamic Bridging IEEE 802.1, 8K MAC addr. EMC • VLAN Tagging IEEE 802.1Q • FCC Part 15 Class A • Double Tagging Q-in-Q, VMAN • ICES-003 Class A • RSTP, STP IEEE 802.1d • ETSI EN 300 386 • Link Aggregation IEEE 802.3ad • ETSI ETS 300 132-2 • Provider Bridges IEEE 802.1ad • ITU-T K.20

Quality of Service NEBS • Classes of Service 8 • Level III (GR-1089-CORE, GR-63-CORE) • Scheduler WFQ, SP or hybrid • Queue Management Tail Drop or RED CE • Classification L2 802.1p/Q priorities • EMC and Safety L3 ToS/DiffServ Environmental Front Panel Indicators and Controls • GR-63-CORE System • ETSI ETS 300 019 • Power A/B • Critical • Major • Minor • HSL/RMT Alarm • ACO (Alarm Cut-Off) / LMT (Lamp Test) Button

Corporate Headquarters International Sales Office ©2008 Actelis Networks Inc. and the Actelis Networks logo are registered trademark of Actelis Americas Sales Office 25 Bazel P.O.B. 10173 Networks, Inc. MetaASSIST, EFMplus and 6150 Stevenson Blvd. Petach-Tikva 49103, Israel Carrier Ethernet over Copper are trademarks of Fremont, CA 94538, USA Tel. +972.3. 924.3491 Actelis Networks, Inc. Actelis Networks reserves the right to change product specifications at any Tel. 1.866.ACTELIS Fax. +972.3.924.3492 time without notice. All Rights Reserved. Tel. 1.510.545.1045 [email protected] 526R00061E-0207 Fax. 1.510.545.1075 [email protected]