Stock Catalogue 2020
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
WHEATON® Glass Bottles
WHEATON® Glass Bottles WHEATON® Glass Bottles WHEATON offers a comprehensive line of glass laboratory bottles and jars. Glass bottles offer sample reliability and integrity, and is a mainstay of labs worldwide. WHEATON bottles are manufactured from USP Type III soda-lime glass with moderate chemical resistance. Popular bottle styles available include Media Bottles, Boston Rounds, Wide Mouth Packers, Straight Sided Jars and Safety Coated Bottles for enhanced laboratory protection. WHEATON completes the package with the right closure. We provide a variety of caps and seals to ensure a perfect fit for each container. WHEATON offers convenience bulk packs of containers with or without caps attached for high use items or facilities with centralized stockrooms. With safety in mind, Tamper Evident Seal / HAZCOM Labels are provided in each case of bottles with the exception of bulk packs. Product Highlights • Bottles manufactured from clear and amber USP Type III soda-lime glass • Wide mouth bottles are ideal for dry and viscous samples • White polypropylene or black phenolic screw closures can be • Amber colored glass is ideal for light sensitive products purchased separately • Narrow mouth bottles are ideal for liquids • Methods of sterilization: dry heat or EtO (not suitable for autoclave) • Safety coated glass prevents dangerous spills and control sharp fragments WHEATON® Glass Bottles French Square Valumetric™ Graduated Bottle Media Bottle, Lab 45 ■ Clear or Amber, USP Type III soda-lime glass ■ Clear, USP Type III soda-lime glass ■ Manufactured -
The Example of Closure Systems for Bottled Wine
Sustainability 2012, 4, 2673-2706; doi:10.3390/su4102673 OPEN ACCESS sustainability ISSN 2071-1050 www.mdpi.com/journal/sustainability Article The Importance of Considering Product Loss Rates in Life Cycle Assessment: The Example of Closure Systems for Bottled Wine Anna Kounina 1,2,*, Elisa Tatti 1, Sebastien Humbert 1, Richard Pfister 3, Amanda Pike 4, Jean-François Ménard 5, Yves Loerincik 1 and Olivier Jolliet 1 1 Quantis, Parc Scientifique EPFL, Bâtiment D, 1015 Lausanne, Switzerland; E-Mails: [email protected] (E.T.); [email protected] (S.H.); [email protected] (Y.L.); [email protected] (O.J.) 2 Swiss Federal Institute of Technology Lausanne (EPFL), 1015 Lausanne, Switzerland 3 Praxis Energia, rue Verte, 1261 Le Vaud, Switzerland; E-Mail: [email protected] 4 Quantis, 283 Franklin St. Floor 2, Boston, MA 02110, USA; E-Mail: [email protected] 5 Quantis, 395 rue Laurier Ouest, Montréal, Québec, H2V 2K3, Canada; E-Mail: [email protected] * Author to whom correspondence should be addressed; E-Mail: [email protected]; Tel.: +41-21-693-91-95; Fax: +41-21-693-91-96. Received: 23 July 2012; in revised form: 21 September 2012 / Accepted: 2 October 2012 / Published: 18 October 2012 Abstract: Purpose: The objective of this study is to discuss the implications of product loss rates in terms of the environmental performance of bottled wine. Wine loss refers to loss occurring when the consumer does not consume the wine contained in the bottle and disposes of it because of taste alteration, which is caused by inadequate product protection rendering the wine unpalatable to a knowledgeable consumer. -
Glass Container Styles
Glass Container Styles Glass Bottles & Jars Boston Round Bottles Boston Round Bottles are general use bottles that are perfect for liquids, product storage, and field or plant sampling projects. They feature a round body, rounded shoulders and narrow screw neck opening. These environmentally sensitive bottles help eliminate waste and help to ensure product integrity for long term storage. Clear / Flint Boston Round Bottles offers maximum visibility and sample integrity. Amber & Cobalt Blue Boston Round Bottles protect contents from UV rays and are ideal for light sensitive products. Composite Test Jars Clear / Flint Composite Test Jars are clear wide-mouth straight sided jars that are ideal for sampling and provide maximum content visibility. These bottles are designed without shoulders for maximum storage capacity. French Square Bottles Clear / Flint French Square Bottles provide maximum content visibility. The space saving design saves on shelf and storage space. The wide mouth opening is ideal for mixing, storing and sampling. Graduated Medium Round Bottles Bottle Beakers® also known as Graduated Medium Rounds are excellent for use with biological and pathological specimens, but can also be used for storing industrial laboratory chemicals and reagents. These clear / flint bottles are designed with a slight shoulder for easy pouring and handling. Graduated in ml and ounces. Mix, measure, and store in the same container. Media Bottles Media Bottles are manufactured from PYREX® borosilicate glass for chemical and thermal resistance and can be used for storage as well as mixing and sampling. Regular Media Bottles have permanent white enamel graduations and marking spots. PYREXPlus® Media Bottles have a protective PVC coating helps prevent glass from shattering and reduces spills. -
SCHOTT DURAN® Laboratory Glass Bottles and Screw Caps - Rely on the Original! - 50086 E 0105 6.5 Ba/Jo Printed in Germany
04194_Sprache_E_RZ.fh8 24.01.2005 14:31 Uhr Seite 2 LABWARE SCHOTT DURAN® E SCHOTT DURAN® laboratory glass bottles and screw caps - Rely on the original! - 50086 e 0105 6.5 ba/jo Printed in Germany Labware SCHOTT AG Hattenbergstrasse 10 55122 Mainz Germany Phone: +49 (0)6131/664907 Fax: +49 (0)6131/664016 E-mail: [email protected] www.schott.com/duran 04194_Sprache_E_RZ.fh8 24.01.2005 14:31 Uhr Seite 3 SCHOTT DURAN® laboratory glass bottles Fields of application and properties The outstanding properties of DURAN® laboratory glass bottles have been valued for many years. By continuous development and improvement, SCHOTT is able to provide top-quality products and systems based on the original, well proven bottle design. Their consistency, reliability and flexibility in storage, packaging and preparation applications make DURAN® laboratory glass bottles the global standard for the chemical, pharmaceutical and bioscience fields. ■ conformity with ISO standards 3585 and 4796 ■ glass type No. 1, normal glass pursuant to USP 27; EP; DAB 10 ■ high service temperature of up to 500°C ■ excellent thermal shock resistance ■ easy to clean and readily sterilized ■ excellent chemical resistance ■ highly inert ■ standardized GL screw thread and matching screw cap systems ensure a low-leakage closure with excellent pouring capabilities ■ stable design and uniform wall strength make DURAN® laboratory glass bottles robust helpers in daily work even under high mechanical strain and rapid or extreme changes in temperature ■ all DURAN® laboratory glass bottles are now supplied with a printed “Retrace Code” allowing batch and quality certification via the internet NEW 04194_Sprache_E_RZ.fh8 24.01.2005 14:31 Uhr Seite 4 A perfect solution to each and every application The classic version – the DURAN® laboratory glass bottle The original is widely used in labora- tories and factories in numerous applications. -
Food & Distribution
Food & Distribution www.piramalglassusa.com Food & Distribution Quality you can trust, Why Piramal Glass Design you will love Piramal Glass Limited (PGL) provides turnkey solutions for glass packaging in over 54 countries for the Specialty Liquor, Beauty, Pharmaceutical, and Food & Distribution markets. We have glass bottle manufacturing and decorating facilities in India, USA and Sri Lanka & Piramal Glass USA is the leader in glass marketing offices in Mumbai, Paris, Sao Paulo, Colombo and Dayton. packaging solutions for the Specialty Piramal Glass USA (PG USA) is the US subsidiary of PGL and a vertically integrated company. We have a glass manufacturing operation in Park Hills, Missouri and a decoration Liquor, Beauty, Pharmaceutical, and Food facility in Williamstown, New Jersey. Supplementing these operations are our warehouses: on the West Coast in Santa Fe Springs, California; in the heartland of the country in Park & Distribution industries. Our multiple state Hills, Missouri; and on the East Coast in Dayton, NJ (the home of our US corporate and marketing office). of the art molded glass plants produce PG USA offers a wide variety of Industry Standards, Piramal Proprietary Designs and industry standard & unique shelf stock and custom designed molds to customers ranging from emerging start-up companies to large multinationals. We provide high-quality shelf stock bottles that will enhance your product. custom containers for both local and global These in stock containers will facilitate quickness to market and reduce initial launch costs. Should your brand require a custom design whether it be the altering of an existing markets. Additionally we provide a variety stock mold or the building of a new custom mold, we offer digital product and engineering services that take your design from concept to delivery. -
Basic Guide to Bottle Identification Say You're Planting a New Tree in Your
Basic Guide to Bottle Age Identification Say you’re planting a new tree in your backyard, and you dig a hole deeper than you’ve had to dig before. In the hole you find a glass bottle that you didn’t put there. How can you identify the bottle? How can you tell if it is old or just a piece of modern recycling that the previous owner left behind? Below please find a basic guide to help you identify a bottle’s age. Bottle identification is a rabbit hole that I’ve found fun to fall into; one bottle can take hours to research, and sometimes, you can’t find anything on it at all! In addition, manufacturing technological advances were adopted over time, not all at once, so older techniques were used at the same time as newer ones. This makes determining exact age for a bottle that wasn’t machine-made a little tricky. But, by looking at a few basic characteristics, you can learn if you want to toss your find in the recycling bin or place it at the center of your mantle. If you are interested in discovering more, I’ve listed some helpful web sites at the end. If you just want a basic guide, hope this helps! How was the bottle made? The first thing that I do when I handle a bottle is look at the construction – the sides, the top or lip, and the base. Free-Blown - Bottles were blown by hand in antiquity, and free-blown bottles were the main manufacturing technique used before the mid-1800s for utilitarian bottles. -
Laboratory Supplies and Equipment
Laboratory Supplies and Equipment Beakers: 9 - 12 • Beakers with Handles • Printed Square Ratio Beakers • Griffin Style Molded Beakers • Tapered PP, PMP & PTFE Beakers • Heatable PTFE Beakers Bottles: 17 - 32 • Plastic Laboratory Bottles • Rectangular & Square Bottles Heatable PTFE Beakers Page 12 • Tamper Evident Plastic Bottles • Concertina Collapsible Bottle • Plastic Dispensing Bottles NEW Straight-Side Containers • Plastic Wash Bottles PETE with White PP Closures • PTFE Bottle Pourers Page 39 Containers: 38 - 42 • Screw Cap Plastic Jars & Containers • Snap Cap Plastic Jars & Containers • Hinged Lid Plastic Containers • Dispensing Plastic Containers • Graduated Plastic Containers • Disposable Plastic Containers Cylinders: 45 - 48 • Clear Plastic Cylinder, PMP • Translucent Plastic Cylinder, PP • Short Form Plastic Cylinder, PP • Four Liter Plastic Cylinder, PP NEW Polycarbonate Graduated Bottles with PP Closures Page 21 • Certified Plastic Cylinder, PMP • Hydrometer Jar, PP • Conical Shape Plastic Cylinder, PP Disposal Boxes: 54 - 55 • Bio-bin Waste Disposal Containers • Glass Disposal Boxes • Burn-upTM Bins • Plastic Recycling Boxes • Non-Hazardous Disposal Boxes Printed Cylinders Page 47 Drying Racks: 55 - 56 • Kartell Plastic Drying Rack, High Impact PS • Dynalon Mega-Peg Plastic Drying Rack • Azlon Epoxy Coated Drying Rack • Plastic Draining Baskets • Custom Size Drying Racks Available Burn-upTM Bins Page 54 Dynalon® Labware Table of Contents and Introduction ® Dynalon Labware, a leading wholesaler of plastic lab supplies throughout -
Carbopol Pemulen Or Noveon Loss on Drying Test Procedure
LUBRIZOL TEST PROCEDURE Test Procedure SA-004 Edition: August, 2010 Loss on Drying Applicable Products: Carbopol®* Polymers, Pemulen™* Polymeric Emulsifiers and Noveon®* AA-1 Polycarbophil Scope: Apparatus: This procedure is for the determination of 1. Vacuum oven controlled at 80 ± 2°C (176 ± volatile materials in Carbopol® polymers, 4°F) with a vacuum of 29 inches (736 mm) Hg. ® Pemulen™ polymeric emulsifiers and Noveon 2. Vacuum oven controlled at 45 ± 2°C (113 ± AA-1 polycarbophil. 4°F) with a vacuum of 29 inches (736 mm) Hg. 3. Balance capable of ±0.0001 g accuracy. Abstract: 4. Heat safe weighing bottle with glass stopper. A weighed sample of polymer is placed in a 5. Desiccator with silica gel desiccant. vacuum oven at a vacuum of 29 inches (736 mm) 6. Vacuum pump. Hg at the specified temperature and time. The sample is cooled, reweighed and the percent weight loss calculated. Safety Precautions: 1. Wear safety goggles and gloves. 2. Polymer dust is irritating to the respiratory passages and inhalation should be avoided. 3. See all Material Safety Data Sheets (MSDS) for additional safety and handling information. Interferences: Care must be taken to avoid moisture pick-up from the atmosphere. The most accurate measurements can be expected from samples removed the first time the sample container is opened. Because of the hygroscopic nature of Carbopol® polymers, Pemulen™ polymeric emulsifiers and Noveon® AA-1 polycarbophil, moisture pick-up each time the sample container is opened will influence the loss on drying. Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000 The information contained herein is believed to be equipment used commercially in processing these Materials, Inc.’s direct control. -
Boston Round Glass Bottles
Boston Round Glass Bottles Finneran Products Certifi ed For ScienceTM - Available in clear or amber glass - Choice of closure and liner - Available in standard, precleaned or precleaned/certifi ed in accordance with recommended E.P.A. Protocol CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned) Containers are processed according to EPA recommended wash procedures. Washed with laboratory grade biodegradable, non-phosphate detergent, rinsed with ASTM Type I De-ionized water, oven dried, and assembled in a contaminate-free environment. Th e exterior of each case is labeled with a lot number. Each case contains a copy of wash “Standard Operating Procedure.” CLASS 3: (Certifi ed) Containers are processed according to EPA recommended wash procedures. Washed with laboratory grade biodegradable, non-phosphate detergent, rinsed with ASTM Type I De-ionized water, oven dried and assembled in a contaminate-free environment. Th e exterior of each case is labeled with a lot number. Each case contains a “Certifi cate of Analysis.” An independent laboratory is used to certify the container’s cleanliness, assuring impartial results. Standard Assembled with White Polypropylene Closure, .015” PTFE Lined Clear Glass Boston Round Bottles - Class 1 Cat. No. Description Qty 9-170 1 oz, 30mL Clear Boston Round Bottle, 20-400mm Th read, White Closure, PTFE Lined 24 Pack 9-171 2 oz, 60mL Clear Boston Round Bottle, 20-400mm Th read, White Closure, PTFE Lined 24 Pack 9-172 4 oz, 125mL Clear Boston Round Bottle, 22-400mm Th read, White Closure, PTFE Lined 24 Pack 9-173 8 oz, 250mL Clear Boston Round Bottle, 24-400mm Th read, White Closure, PTFE Lined 12 Pack 9-174 16 oz, 500mL Clear Boston Round Bottle, 28-400mm Th read, White Closure, PTFE Lined 12 Pack 9-175 32 oz, 1000mL Clear Boston Round Bottle, 33-400mm Th read, White Closure, PTFE Lined 12 Pack Amber Glass Boston Round Bottles - Class 1 Cat. -
Qorpak™ Laboratory Container & Supply Catalog
Laboratory Container & Supply Catalog TABLE OF CONTENTS Page # Page # Page # New Products Buckets/Pails Vials, Plastic HDPE Square Bottles . .3 Open Head HDPE Pails.................40 Hinged .............................57 Bags Snap Cap ...........................57 Zip Bags . .4 Carboys & Drums Carboys.............................41 Weigh Dishes . 58 Bottles, Glass Hedpaks® ...........................41 Dropper Bottles ......................12 Packos .............................42 Technical Information Feature Bottles.....................5 - 6 Winpaks® ...........................41 Conversion Chart .....................58 Jugs ...............................14 How to Select the Right Bottle & Closure..59 Narrow Mouth Bottles...............7 - 8 Cubitainers® .......................43 Plastic Resin Guide ...................37 Safety Coated Bottles .............15 - 17 Trademarks................. Back Cover Wide Mouth Bottles................9 - 13 Caps/Closures UN Ratings Guide.....................41 Closure Torque System ........43Hole Caps Bottles, Plastic 44 Dispensing Bottles....................36 Metal Caps..........................49 Jars............................35 - 36 Phenolic & Thermoset Caps.........44 - 47 Jugs ...........................38 - 39 Polypropylene Caps ...............47 - 49 Narrow Mouth Bottles.............30 - 31 Septa & Discs........................50 Did You Know? Spray Bottles ........................37 Specialty Dispensing Caps..........50 - 51 Wide Mouth Bottles...............32 - 34 • Qorpak has been a -
The Effect of Liquid Hot Filling Temperature on Blow-Molded HDPE Bottle Properties
Brigham Young University BYU ScholarsArchive Theses and Dissertations 2008-12-04 The Effect of Liquid Hot Filling Temperature on Blow-Molded HDPE Bottle Properties Benjamin S. Hudson Brigham Young University - Provo Follow this and additional works at: https://scholarsarchive.byu.edu/etd Part of the Manufacturing Commons BYU ScholarsArchive Citation Hudson, Benjamin S., "The Effect of Liquid Hot Filling Temperature on Blow-Molded HDPE Bottle Properties" (2008). Theses and Dissertations. 1624. https://scholarsarchive.byu.edu/etd/1624 This Thesis is brought to you for free and open access by BYU ScholarsArchive. It has been accepted for inclusion in Theses and Dissertations by an authorized administrator of BYU ScholarsArchive. For more information, please contact [email protected], [email protected]. THE EFFECT OF LIQUID HOT FILLING TEMPERATURE ON BLOW-MOLDED HDPE BOTTLE PROPERTIES by Benjamin S. Hudson A thesis submitted to the faculty of Brigham Young University in partial fulfillment of the requirements for the degree of Master of Science School of Technology Brigham Young University December 2008 BRIGHAM YOUNG UNIVERSITY GRADUATE COMMITTEE APPROVAL of a thesis submitted by Benjamin S. Hudson This thesis has been read by each member of the following graduate committee and by majority vote has been found to be satisfactory. Date Mike P. Miles, Chair Date A. Brent Strong Date Scott D. Grimshaw BRIGHAM YOUNG UNIVERSITY As chair of the candidate’s graduate committee, I have read the thesis of Benjamin S. Hudson in its final form and have found that (1) its format, citations, and bibliographical style are consistent and acceptable and fulfill university and department style requirements; (2) its illustrative materials including figures, tables, and charts are in place; and (3) the final manuscript is satisfactory to the graduate committee and is ready for submission to the university library. -
Product Catalogue Digital Version Home Brew Kit
PRODUCT CATALOGUE WWW.THEPLASTICBOTTLESCOMPANY.COM DIGITAL VERSION HOME BREW KIT Following a brainstorming session, we came up with the brilliant idea of putting together some of our great looking PET HUSKY bottles in a handy Vaping Home Brew kit. We talked to our vaping customers to find out what products they would like to see in the kit and we came up with what we think is a pretty comprehensive collection of bottles and accessories to get vapers sorted with their home mixing requirements. The Home Brew Kit is available in Clear bottle and Smokey bottle versions and includes: 4 x 60ml HUSKY short-fill bottles & twin-seal caps 4 x 120ml HUSKY short-fill bottles & twin-seal caps 8 x 10ml PET bottles, nibs & caps CLICK HERE 1 x 1L Jerry can with peli pump TO SEE HUSKYS ON 1 x 500ml Jerry can with peli pump Clear bottles Smokey bottles 2 01229 588877 • 01229 588468 Natural HDPE Bottles ..................4 Amber PET Bottles & Jar ..........16 Caps & Accessories ..........................5 Caps & Accessories ........................17 Natural HDPE Bottles ..................6 LDPE & MDPE Bottles ................18 Caps & Accessories ..........................7 Caps & Accessories ........................19 Black HDPE Bottles .......................8 PP, SAN & PET Jars .......................20 Caps & Accessories ..........................9 Linea & Cosmetic Jars................21 White HDPE Bottles ....................10 HUSKY Bottles & Caps ...............22 Caps & Accessories ........................11 Jerrycans .........................................23