Sandforce® SF2400 Cloud Computing
Total Page:16
File Type:pdf, Size:1020Kb
SandForce ® SF2400 Cloud Computing FLASH CONTROLLERS Data Sheet The continued migration to cloud computing is creating a higher demand for storage Key Features reliability and performance. Many cloud computing data centers have recognized the benefits ■■ Second-generation solution optimized for of solid state drives (SSDs) and are deploying them to boost access performance as well as cloud computing storage environments take advantage of their ultra-high responsiveness, low latency, and low power consumption. ® ■■ SATA 6Gb/s with support for NCQ up to 32 The Seagate SandForce SF2400 cloud computing flash controllers are specifically optimized commands for intensive cloud computing workloads, delivering high performance and endurance in ■■ Maintains the highest level of balanced read combination with a low total cost of ownership. and write performance (up to 60K IOPS and 500MB/s) Endurance and Longevity ■■ AES-256 and AES-128 automatic double While new generations of NAND flash memory are developed on smaller silicon geometries to encryption at the drive level ensures the best reach higher densities and bring the cost of flash memory down, its endurance is significantly secure data protection. dropping. The latest 1x/1y nm MLC NAND flash memory has only around 3,000 P/E cycles. ■■ Outstanding predictive failure analysis Seagate DuraWrite™ data reduction technology optimizes writes to the flash memory over available through media health test conventional controllers, and implements highly intelligent block management and wear ■■ Supports the latest 10nm-class and 20nm- leveling to increase the overall endurance and reliability of the complete SSD. class MLC flash memory with Toggle/ONFi2 interfaces The SF2400 flash controller delivers outstanding predictive failure analysis through the media ■■ Increases the standard ECC correction power health test indicator tool and extended S.M.A.R.T. attributes. This helps analyze the functional for outstanding data reliability with standard operation of an SSD and warn IT managers of potential pending failures. MLC flash ■■ User-configurable over-provisioning for With SandForce advanced technologies and tools, the latest MLC-based SSDs have longer greater flexibility to balance endurance with endurance and can be used reliably in workload-intensive cloud computing environment. performance ■■ DuraClass™ technology provides best-in-class Performance endurance, performance, and power efficiency. SSDs take advantage of advanced high-speed SATA, SAS, and PCIe interfaces in newer systems ™ ■■ DuraWrite data reduction enables SSD to remove performance bottlenecks. The SandForce flash controllers deliver performance that deployment using standard MLC flash without sacrificing performance. maximizes the throughput of a SATA 6Gb/s interface with balanced read/write speeds, keeping the cloud computing system performance highly effective. ■■ Support up to 512GB capacity ■■ Single chip, DRAM-less solution for small form High-Level Security factor support and low BOM cost Data security is becoming a critical component in the digital age. The SF2400 flash controller features high-level security protocols for the safety of data stored in flash memory. Seagate DuraClass technology automatically stores data in a highly secure AES-256 and AES-128 hardware encrypted format, that double encrypts the data. SSDs using SandForce controllers are self-encrypting devices (SED) providing the highest level of data security.1 Data Protection and Reliability The SF2400 flash controller features a superior higher-level BCH ECC algorithm with double the standard ECC correction power above the NAND flash required specification, and the unique Seagate RAISE™ (Redundant Array of Independent Silicon Elements) technology. RAISE technology provides the protection and reliability of RAID on a single drive without the 2x write overhead of parity. 1 Self-encrypting devices are not available in all models or countries. Seagate SandForce SF2400 Block Diagram DuraClass™ Technology I2C, RS-232, SMART ™ ™ DuraWrite Intelligent Garbage RAISE GPIO, JTAG Collection Read Wear Disturb SATA 6Gb/s Leveling CPU NAND Interface NCQ up to 32 • Toggle, ONFI 2 • Up to 166 MT/s • 8 ch / 16 byte lanes 55b/512 • 1x, 1y, 2x, 2y nm PHY Link AES-256 & Buffer BCH • MLC Transport Command AES-128 ECC Engine • Up to 512 GB Seagate® SandForce® SF2400 Cloud Computing Flash Controllers DuraClass™ Technology • DuraWrite™ extends the endurance of SSDs • RAISE™ (Redundant Array of Independent Silicon Elements) • Intelligent block management and wear leveling • Intelligent data retention optimization • Intelligent read disturb management • Best-in-class ECC protection for longest data retention • Intelligent recycling for advanced free space and drive life management (garbage collection) • Power/performance balancing • Thermal threshold management Host Interface SATA 6Gb/s, 3Gb/s, and 1.5Gb/s support Native command queuing (up to 32 commands) S.M.A.R.T. command transport Max Capacity Supported 512GB1 Performance (sustained) Sequential read and write transfer: up to 500MB/s (@ 128KB blocks) Random read and write IOPS: up to 60,000 (@ 4KB blocks) Flash Memory Support MLC, 1x/1y/2x/2y nm (Toggle, ONFi2; up to 166 MT/s) Security Data encryption: AES-256 and AES-128 Reliability ECC recovery: up to 55 bits correctable per 512-byte sector (BCH) Unrecoverable read errors: less than 1 sector per 10E17 bits read ECC on all internal memory; full end-to-end CRC protection; RAISE Operating Temperature Commercial: 0°C to 70°C ambient Package 256-pin TFBGA – 14 x 14 mm, 0.8 mm pitch, 8 byte lanes Compliance RoHS, Halogen-Free, Green Ordering Information Part Number Description Capacity1 Memory Type IOPS (sustained)2 Temperature SF-2481VB1-SDJ Cloud Computing 24GB to 512GB MLC up to 60,000 Commercial SATA 6Gb/s 1 One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to product capacity. 2 Random read and write performance @ 4KB blocks seagate.com AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16–18, rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 © 2014 Seagate Technology LLC. All rights reserved. Printed in USA. Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. DuraClass, DuraWrite, RAISE, SandForce, SandForce Driven and the SandForce Driven logo are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. When referring to product capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual data rates may vary depending on operating environment and other factors. The export or re-export of Seagate hardware or software is regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and may be controlled for export, import and use in other countries. Seagate reserves the right to change, without notice, product offerings or specifications. DS1831.1-1409US, September 2014.