DOCSLIB.ORG

Hand Tools Levels Measuring and Layout Tools Whitton Supply

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hand Tools Levels Measuring and Layout Tools Whitton Supply Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Levels Contractors Levels Kraft Tools Professional Aluminum Extruded Levels Part # Length Vials HD-24 24" 6 HD-36 36" 6 HD-48 48" 6 HD-72 72" 10 HD-78 78" 10 HD-96 96" 10 Measuring and Layout Tools Chalk Reels and Chalk Dewalt Hand Tools 5 lbs. Calk Red Part # Size Color DWHT47059 5 lbs. Red 8 oz. Chalk Black Part # Size Color DWHT47056 8 oz. Black 8 oz. Chalk Blue Part # Size Color DWHT47049 8 oz. Blue 8 oz. Chalk Red Part # Size Color DWHT47048 8 oz. Red Service After the Sale 1 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Chalk Reels and Chalk Dewalt Hand Tools Chalk Reel Part # String Length DWHT47142 100' Large Capacity Chalk Reel Part # String Length Chalk Capacity Gear Ratio DWHT47252 150' 1 lb 3:1 Reel Kit with Blue Chalk Part # String Length Size Color DWHT47143 100' 8 oz. Blue Service After the Sale 2 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Chalk Reels and Chalk Dewalt Hand Tools Reel Kit with Red Chalk Part # String Length Size Color DWHT47144 100' 8 oz. Red Irwin Tools Aluminum Chalk Reel Part # Gear Ratio String Length IT64110 1:01 100' Chalk Blue 5 lbs. Part # Color Size IT65101 Blue 5 lbs. Chalk Blue 8 oz. Part # Color Size IT64901 Blue 8 oz. Chalk Glo Orange 2.5 lbs. Part # Color Size IT65205 Glo Orange 2.5 lbs, Chalk Jet Black 8 oz. Part # Color Size IT64908 Jet Black 8 oz. Chalk Red 5 lbs. Part # Color Size IT65102 Red 5 lbs. Service After the Sale 3 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Chalk Reels and Chalk Irwin Tools Chalk Red 8 oz. Part # Color Size IT64902 Red 8 oz. Chalk White 5 lbs. Part # Color Size IT65104 White 5 lbs. Large Capacity Chalk Reel Part # String Length IT2031311 150' Permanent Marking Chalk Part # Color IT2032160 Black Speedline chalk Reel Part # Gear Ratio String Length IT64310 3.5:1 100' Service After the Sale 4 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Chalk Reels and Chalk Stanley Hand Tools Die-Cast Aluminum Chalk Line Reels Part # Contains String Length S47-099 Chalk Line Reel 100' Plastic Chalk Line Reels Part # Contains String Length S47-440 Chalk Line Reel 100' PowerWinder Chalk Line Reels Part # Contains String Length S47-460 PowerWinder Chalk Line Reel 100' Contractors Levels Kraft Tools Professional Brass Bound Mahogany Levels Part # Length Vials 12AB-48 48" 6 Professional Cast Aluminum Levels Part # Length Vials 12-12 12" 4 18-18 18" 6 24-24 24" 6 30-30 30" 6 48-48 48" 6 Service After the Sale 5 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Electronic Tools Stanley Hand Tools Pro Stud Sensor Part # Scan Depth Batteries (Not Included) Overall Length S77-255 1/2", 1", 1-1/2" 1, 9 Volt 9.8" Self Leveling Plumb Laser Part # Height Length Width STHT77342 3-3/4" 9" 6-5/8" Stud Finder Part # Length Width Height S47-400 1-3/8" 1-3/8" 1-1/4" Service After the Sale 6 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Electronic Tools Stanley Hand Tools Stud Sensor 100 Part # Scan Depth Batteries (Not Included) Overall Length S77-110 3/4" 1, 9 Volt 8.9" Stud Sensor 150 Part # Scan Depth Batteries (Not Included) Overall Length S77-115 1/2", 1", 1-1/2" 1, 9 Volt 9.8" Stud Sensor 200 Part # Scan Depth Batteries (Not Included) Overall Length S77-720 3/4" 1, 9 Volt 10" Stud Sensor 50 Part # Scan Depth Batteries (Not Included) Overall Length S77-050 3/4" 1, 9 Volt 9" Service After the Sale 7 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Dewalt Hand Tools 24" Mag Box Beam Level Part # Length # of Vials Magnetic DWHT43025 24" 3 Yes 48" Mag Box Beam Level Part # Length # of Vials Magnetic DWHT43049 48" 3 Yes 78" Mag Box Beam Level Part # Length # of Vials Magnetic DWHT43079 78" 3 Yes Channellock Torpedo Levels Part # Length CL615 8.5" CL620 8.25" CL620L 8.25" Service After the Sale 8 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Irwin Tools 1500W Mason Level Part # length IT1801105 48" 2050 Magnetic Box Beam Level Part # length IT1794076 24" IT1794078 48" 250 Series Magnetic Heavy Duty Torpedo Level Part # length IT1794153 9" Service After the Sale 9 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Irwin Tools Angle Locator Magnetic Part # IT1794488 Stabila General Construction Level Type 80A-2 Part # Length Magnet Type STB29024 24" - STB29048 48" - STB29072 72" - Service After the Sale 10 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila Heavy Duty Level Type 196 Part # Length Magnet Type STB37424 24" - STB37436 36" - STB37448 48" - STB37459 59" - STB37472 72" - STB37496 96" - STB37524 59" & 24" Level Set STB37532 78" & 32" Jamber Set Service After the Sale 11 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila Heavy Duty Magnetic Level Type 96M Part # Length Hand Grips STB38624 24" none STB38632 32" none STB38648 48" 2 STB38659 59" none STB38678 78" 2 Service After the Sale 12 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila Level Carrying Cases Part # Description STB30015 Holds 48", 32", 24",16", torpedo STB30025 Holds 78", 59", 32", 24", 16", Torpedo STB30035 Holds 7' Plate Level, 48", 24" Lighted Level Kity Type 196LED Part # Length Light Packs Hand Grips STB39324 24" 2 1 STB39340 48" 2 2 Service After the Sale 13 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila Magnetic TECJH Digital Electronic Level Type 96M-2 Part # Length Magnet Type Hand Grips Horizontal Vials Vertical Vials STB36520 24" Rare Earth none 1 1 STB36540 48" Rare Earth 1 1 2 Magnetic Torpedo / Magnetic V-Groove Torpedo Type 81S Part # Length Magnet Type Degree Vial STB25100 10" Rare Earth - STB25245 10" V-Groove 45° STB25360 10" V-Groove 360° Service After the Sale 14 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila Masons Level Type 196-2K Part # Length Magnet Type Hand Grips STB36424 24" - none STB36448 48" - 2 Service After the Sale 15 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila Plate Level 2 Type 106 Part # Length Magnet Type STB35610 6' - 10' - STB35712 7' - 12' - Pocket PRO Magnetic with Holster Part # Size Magnet Type STB11901 1-5/8" x 2-5/8" V-Groove Service After the Sale 16 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila R Beam Type 300 Part # Length STB41048 48" STB41072 72" Service After the Sale 17 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stabila Tech Digital Electronic Level Type 196-2 Part # Length Magnet Type Hand Grips Horizontal Vials Vertical Vials STB36524 24" - none 1 none STB36548 48" - 1 1 2 Stanley Hand Tools Aluminum I-Beam Levels Part # Color Vials Hand Grips Length S42-240 Yellow 3 0 24" S42-480 Yellow 3 2 48" Box Beam Levels Part # Type Vials Hand Grips Length S43-524 - 3 2 24" S43-548 - 3 2 48" Service After the Sale 18 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Levels Stanley Hand Tools High Impact ABS Levels Part # Color Vials Hand Grips Length S42-468 Yellow 3 2 24" S42-470 Yellow 3 6 48" I-Beam 180 Levels Part # Color Vials Hand Grips Length S42-324 Yellow 3 2 24" S42-328 Yellow 3 2 48" Markers Irwin Tools Carpenter Pencil Part # Lead IT66305SL Medioum Carpenter Pencil Sharpener Part # IT233250 China Markers Part # Color IT02060-SH White IT02089-SH Black Service After the Sale 19 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Markers Irwin Tools Fine Point Markers Part # Color IT30051 Black IT30102-SH Red Service After the Sale 20 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Markers Irwin Tools King Size Markers Part # Color IT15001-SH Black IT15002-SH Red Lumber Crayon Holder Part # IT66510 Magnum 44 Markers Part # Color IT44001-SH Black Meanstreak Markers Part # Color IT85018-SH White Uni-Paint Markers Part # Color IT63601-SH Black IT63602-SH Red IT63603-SH Blue IT63604-SH Green IT63605-SH Yellow IT63606-SH Violet IT63607-SH Orange IT63613-SH White IT63614-SH Silver Wax Based Lumber Crayons Part # Color Length IT66401 Red 4-1/2" IT66402 Blue 4-1/2" IT66403 Green 4-1/2" IT66404 Black 4-1/2" IT66405 White 4-1/2" IT66406 Yellow 4-1/2" Service After the Sale 21 www.whittonsupply.com Whitton Supply Phone:(405) 236-5561 · (800) 777-5561 Hand Tools Measuring and Layout Tools Measuring Dewalt Hand Tools Auto Retractable Long Tape Part # Blade Length Blade Width Gear Ratio DWHT34201 100' 3/8" Auto Rectracting Closed Case Long Tape Part # Blade Length Blade Width Gear Ratio DWHT34036
Load more

Recommended publications
  • Carpentry Tool List 2018-2019
    Carpentry Tool List 2021-2022 PLEASE NOTE: This Tool list/ pricing is subject to change. Students are encouraged to check with their instructor during the summer months to see if the tool list has been updated. Below are the contacts for the freshmen instructors: Dan Noel: [email protected] Timothy Draper: [email protected] Tool Description /suggested brands (Brand not mandatory) Estimated Cost ($) 1. Calculator/ Construction Master 39.00 2. 16oz Plumb Bob/ Swanson 12.60 3. 12” Combination Square/ Swanson 9.98 4. Framing Square/ high visibility / Johnson (*must have a rafter table on it*) 9.36 5. 30 foot retractable tape measure / Stanley 25.47 6. 100 foot steel tape / Stanley 26.72 7. Sliding T-bevel/ Johnson 9.84 8. Chalk Line/ Stanley FatMax 100’ line w/ red or blue chalk 12.98 9. Dry Line #18 x 250’ 12.98 10. Crosscut Handsaw (suggested 12 point, 20” long)/ Stanley or Irwin 23.52 11. Drywall Saw/ Stanley Jab Saw 12.31 12. 12 inch Steel Spackling Mud Pan/ Wal-board 13.98 13. Drywall Knives/ Wal-board/ 4” ($8.95), 6” ($9.50) 8” ( $10.00) & 10” ($11.50) 38.00 14. 10 ounce Caulk Gun/ Workforce 13.97 15. 3 Piece Nail Set/ DeWalt 8.97 16. ½” Countersink or rosebud bit 5.00 17. Pencil Compass/ Scriber/ General Tool 843/1 3.00 18. 10” Cat’s Paw (nail puller) Bostitch 12.98 19. 15” Wonder Bar/ Flat Bar/ Vaughan 12.98 20. Utility Knife (with retractable blade)/ Stanley 3.98 21. Coping Saw w/replacement blades/ Irwin 5.98 22.
    [Show full text]
  • American FLAT BOW
    OUTDOOR SPORTS Now you can shoot THE NEW American FLAT BOW HEN the white man provided the American Indian with a cheap trade musket in place of his native bow and arrow, he saved himself a good deal of grief, for had the red man de- velopewd his weapon along a logical path he might have arrived at an approximation of the bow we now know as the "semi- Indian," "flat," or "American" bow. With such a bow he could have shot with accuracy at a hundred yards (about the extreme The completed bow bends accurate range of the long rifle), and could have delivered ar- perfectly, shoots far, rows faster than any frontier scout could load his rifle. and hits hard. Robin Hood himself never had Any home workman, equipped with ordinary tools, can readily so scientific a weapon. build the most modern and most efficient bow yet designed. The This illustration shows best material for the amateur is the imported wood known as the bow drawn back al- "lemonwood." It can be worked almost entirely by measure- most to the "full draw" ment, without much regard to the grain. California yew and Osage orange probably make a better bow, but not for the inexperienced builder. Lemonwood can be had from most dealers in archery sup- plies, either in the rough stave or cut to approximate outline. The price ranges from about $1.75 to $3. In ordering you should be careful to say you need a wide stave for a flat bow. The dimensions given are for a bow 5 ft.
    [Show full text]
  • Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko
    Craft History and the Merging of Tool Traditions: Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko Sinoto Alexander Spoehr For centuries the Japanese have made extensive use of wood as the main raw material in the construction of houses and their furnishings, temples, shrines, and fishing boats. As a wood-worker, the carpenter is one of the most ancient of Japanese specialists. He developed a complex set of skills, a formidable body of technical knowledge, and a strong tradition of craftsmanship to be seen and appreciated in the historic wood structures of contemporary Japan.1 The first objective of this study of carpenters of Japanese ancestry in Hawaii is to throw light on how the ancient Japanese craft of carpentry was transplanted from Japan to a new social, cultural, and economic environment in Hawaii through the immigration of Japanese craftsmen and the subsequent training of their successors born in Hawaii. Despite its importance for the understanding of economic growth and develop- ment, the craft history of Hawaii has not received the attention it deserves. The second objective of the study is more anthropological in nature and is an attempt to analyze how two distinct manual tool traditions, Japanese and Western, met and merged in Hawaii to form a new composite tool tradition. This aspect of the study falls in a larger field dealing with the history of technology and of tool traditions in general. Carpentry today, both in Japan and in the United States, relies heavily on power rather than hand tools. Also, carpenters tend to be specialized, and construction is to a major degree a matter of assembling prefabricated parts.
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • Download Entire Issue As A
    THIS ISSUE’S PROJECT SPOTLIGHT: SOLDERED-SEAM COPPER GLENRIDGE HALL RE-SLATING PROJECT SANDY SPRINGS, GA ROOFS The R.W. Stokes Company, Atlanta, GA • Page 9 Many old slate and tile roofs have low-slope “sol- See page 9 dered-seam” metal roofs abutting or adjoining them. They’re usually found on porches, bay windows, mansard roofs, and two-story additions and are most often made of terne metal pans, and sometimes copper pans, soldered at their flat-lock seams, hence the name “soldered- seam,” “lock-seam,” or “flat-lock” roofs. The best way to repair a leaking soldered- seam metal roof... (CONTINUED ON PAGE 10) Demo soldered-seam copper roof section under con- struction at a workshop conducted by Jenkins Slate Above: Manuel Avila, crew foreman (left); Ron Stokes, owner of The Roofing Services, Grove City, PA, and taught by Keith Schorr of Butler, PA, R.W. Stokes Co., (center); and Juan Avila (right), re-slating Glenridge showing drip edge and one pan installed over rosin paper (above). Hall. Participants included (left to right, below) Doug Lodge, Keith Schorr (with hat), Dave Kunz, Brent Ulisky, Barry Smith, Stacy Moore, and Orion Below: Staggered butt and ragged butt slating styles yield roofs that are Jenkins, all gathered around the finished roof section. This workshop will both functional as well as artistic. See page 3 for hints on how to install soon be available on videotape — stay tuned at jenkinsslate.com. this sort of slate roof. Staggered Butt Slating See page 3 See page 10 Prsrt Std U.S. Postage PAID SlateRoofWarehouse.com Gibsonia, PA Permit No.
    [Show full text]
  • Korowood™ Handrails
    KOROWOOD™ HANDRAILS HW70 Handrail Recommended Installer Qualifications:Only those parties experienced in working with finished fine wood products should engage in installing Korowood™ Handrail. Recommended Installation Equipment: Radial Arm Saw or Power Miter Box with 12” (304.8mm) sharp carbide-tipped Alternating Tooth Bevel-Positive Hook 80-100 teeth blade, Tape Measure, Level, Chalk Line, Utility Knife, Drill, Drill Bits, Screwdriver, Sanding Block, Wood Glue, Removable Marker, Cleaning Cloth, and Suitable 1/4” (6.35mm) x 4” (101.6mm) Long Mounting Fasteners. 1. Locate and install Korowood Handrail in accordance with architectural drawings and specifications. When required, Korogard shop drawings should be used in conjunction with these documents. 2. Lay out work to be completed, including all component parts, along base of substrate (wall). Check material for any damage that may have occurred during shipment and/or handling at job site. 3. Snap chalk line at proper location on substrate to ensure level installation. Chalk line should be calculated to center line of mounting bracket wall fasteners. Note: Chalk line will be visible after installation and must be removed at cleanup. 4. Determine cut length of rail by locating ends on substrate, measure distance, and allow 3-1/2” (88.9mm) at end returns, 3” (76.2mm) at substrate inside corners, and 0” (0mm) at substrate outside corners. Mark Handrail at face of wood and miter-cut rail in appropriate direction to appropriate length. Miter ends at end returns and outside corners to 22-1/2˚ and ends at inside corners to 45˚ (see details). Use care to assure accurate and clean cuts.
    [Show full text]
  • The Chalk Line (1931)
    East Tennessee State University Digital Commons @ East Tennessee State University ETSU Yearbooks University Archives 1931 The Chalk Line (1931) East Tennessee State University Follow this and additional works at: https://dc.etsu.edu/yearbooks Part of the Higher Education Commons Recommended Citation The Chalk Line (1931), Archives of Appalachia, East Tennessee State University https://dc.etsu.edu/yearbooks/17 This Book is brought to you for free and open access by the University Archives at Digital Commons @ East Tennessee State University. It has been accepted for inclusion in ETSU Yearbooks by an authorized administrator of Digital Commons @ East Tennessee State University. For more information, please contact [email protected]. / -===----~ ~~ ~~:§] ~ _l)~l] -----· I SEN I. 1 • ;_]) itur Senior Issue Published by the Graduating Classes STATE TEACHERS COLLEGE Johnson City, Tennessee June and August, 1931 SPONSORED BY W. B. BIBLE 2 THE CHALK LINE June 5, 1931 ~ I­ _] ~ CJ <( u.. l n June 5, 1931 THE CHAL K LIN E 3 W4r ill4allt ( S 11ccial SttiD) ( Ucgulur Stu.ff) EDl1'0US-IN-CHIEJ<' JESSIE SNIEGOCKI FRANCES JACKSON ASSOCIATE' EDITORS L. E. HARVILLE SUSIE BERRY T. S. GARDNER L. E. HARVILLE J ESSIE SNIEGOCKl LITERARY EDITORS DOROTHY MAY INEZ ANDREGG GRACE HAMMER EDRTE MATTHEWS MARGARET REMINE ATHLE'l'IC EDITORS FRANK BRYANT VIRGINIA PARKER KATHLEEN CONNER SAM WARD CHARLES SPEAR ALUMNI EDITORS DELMAS LAWS DESSIE DEAKINS BERTHA JUNE TILEMAN DELMAS LAWS CAMPUS EDITORS KATHLEEN SMITH MI LDRED ELLISON LORA BELLE GRUBB LORA BELLE GRUBB VERDEL NICLEY LOUISE IRWIN JOKE EDITORS JAMES R. LARGE KATHLEEN CONNER ROSALIE LJTTLEI<'IELD LOWELL KIN KEAD JESSIE LINDSEY KATHERINE SABIN ORGANIZATION EDI TORS BILL MAY NELL DAVIDSON MILDRED McLANE BILL MAY CIRCULATION MANAGERS PAULINE RICHIE ALMA BROWN JESSIE LINDSEY B USIN ESS MANAGERS MARGARET REMINE LOUISE CARR MILDRED ELLISON SARAH HICKEY THOMAS MORGAN CHARLOTTE COX EXCHANGE EDITORS W.
    [Show full text]
  • Keson Product Catalog
    Our grandfather and Keson’s founder, Roy Nosek, often said: “If a job is worth doing, it’s worth doing right.” We know he didn’t say it fi rst, but he said it fi rst to our fathers who said it fi rst to us. He showed us what it means through the way he lived his life and the way he treated people. Be Positive. Work Hard. Respect Others. Have Fun. Act Ethically. Do Good. Make your mark. We believe in these principles. We strive to practice them in all that we do. Keson products are for people who are passionate about their work and getting it done right. We think this might be just about everyone. Aaron Nosek Jude Nosek Dave Nosek President Marketing Human Resources PHONE 800.345.3766 • FAX 800.345.8849 • WWW.KESON.COM • [email protected] TABLE OF CONTENTS “This product is used by 2 NEW PRODUCTS FOR 2017 many cavers as the number one measuring tool for 4 MEASURING underground survey of caves. 5 MEASURING WHEELS We have taken these tapes well over 500 ft underground 6 SUMMARY 8 METAL and have dragged them 11 PLASTIC through some of the worst 15 PAINT mud, grit and grime you can imagine. We have gone to the 16 LONG TAPE MEASURES point of completely covering 16 OPEN CASE STEEL BLADE the tape with mud—so much 20 CLOSED CASE STEEL BLADE mud you cannot even see the 21 OPEN CASE FIBERGLASS BLADE 25 CLOSED CASE FIBERGLASS BLADE numbers. We just washed the tape in water and it’s like 26 SHORT TAPE MEASURES new again.
    [Show full text]
  • Edding Permanent Markers Chalk Line Reels Bleispitz Permanent Markers
    Edding permanent markers Chalk line reels Bleispitz permanent markers Chalk line marking powder Suremark paint markers Stylmark paint markers Soapstone chalk for welders Blackboard chalker Lyra chalk markers Lyra permanent markers Punch numbers and punch letters Paint stencils Permanent marker with fine round nib 1mm Edding 400 For almost all materials, fine lined marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Number Description 000153ZW Edding 400 Black Bleispitz Permanent marker fine round nib 1,0 mm. For almost all materials, fine lined marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Packe per 10 pieces. Number Description 000BL0754 Bleispitz 1,0 mm Red 000BL0778 Bleispitz 1,0 mm Blue 000BL0679 Bleispitz 1,0 mm Black 000BL0792 Bleispitz 1,0 mm Green Permanent marker with round nib 1.5-3mm Edding 300 series For almost all materials, line marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Number Description 000150 Edding 300 Blue 000151 Edding 300 Red 000152 Edding 300 Black 000153 Edding 300 Green Bleispitz Permanent nib 1,5-3 mm For almost all materials, line marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Packe per 10 pieces. Number Description 000BL0594 Bleispitz 1,5-3 mm Red 000BL0617 Bleispitz 1,5-3 mm Blue 000BL0631 Bleispitz 1,5-3 mm Black 000BL0655 Bleispitz 1,5-3 mm Green Permanent marker with round nib 2-4mm Edding 750 series For almost all materials, line marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Number Description 000149 Edding 750 White 000149B Edding 750 Blue 000149BL Edding 750 Black 000149RE Edding 750 Red 000149YE Edding 750 Yellow Pag.
    [Show full text]
  • Level 3 Construction T Level: On-Site Construction (8710-30)
    T level Technical Qualification in Construction: On-Site Construction (Level 3) (delivered by City and Guilds) (8710-30) May 2020 Version 2.0 Draft Qualification Content Pack Copyright in this TQ Specification belongs to, and is used under licence from, the Institute for Apprenticeships and Technical Education 21.02.2020 T Level is a registered trade mark of the Institute for Apprenticeships and Technical Education. Qualification at a glance T Level route Construction T Level pathway On-site Construction City & Guilds number 8710-30 Age group approved 16+ Entry requirements Formal entry requirements are not set by City & Guilds. However, we would expect that Learners have the appropriate attainment at Level 2 before commencing their studies. Assessment Core - knowledge tests are externally assessed Core – employer-set project is externally assessed Occupational specialisms are externally moderated First registration September 2021 Total GLH TBC Total TQT TBC Title and level City & Guilds number T Level technical Qualification: On-Site Construction (Level 3) 8710-30 (delivered by City and Guilds) 2 Contents Qualification at a glance 2 Contents 3 1 Introduction 5 What is this qualification about? 5 Glossary of terms 9 Technical Qualification Structure 10 2 Centre requirements 12 Approval 12 Resource requirements 15 Physical resources 15 Internal quality assurance 16 Learner entry requirements 16 3 Delivering T Level Technical Qualifications 17 Initial assessment and induction 17 Programme delivery 17 4. Competency frameworks 18 Core skills
    [Show full text]
  • 1 Facebook Vondriska Works Instagram @Vondriskaworks
    Logs to Lumber George Vondriska Why cut lumber from your own logs? • Get species you can’t commercially buy. • Control the dimensions of your stock. (Great for turners.) • Heirloom wood I find that, working by myself, I can cut logs up to 12” diameter and 36” long. Cut the logs while they’re wet, as soon as possible after the tree is cut down. If there’s a delay between cutting the log and machining it into lumber, paint the ends of the log to slow down drying. If the bark stays on the log, leave it on. This will also slow down drying. We want the log as wet as possible when it’s being cut. Build a sled A log can roll, dangerously, during the cut, unless you stabilize it. This simple sled acts as an outrigger to keep the log stable. 3/4" plywood works well. Make the base and the vertical 6” wide. Make it as long as the log you’re going to cut. Drill a few holes for lag screws. 1 www.vondriskawoodworks.com Facebook Vondriska Works Instagram @vondriskaworks What you need • A metal detector isn’t imperative, but if you’re not certain of the source of your log, it’s good insurance. Ruin a couple bandsaw blades, and the metal detector will look inexpensive. • A moisture meter will help you determine the moisture content of your material, and when it’s dry enough to use. • A snap line (chalk line) is the easiest way to get the first line on your log.
    [Show full text]
  • IRWIN STRAIT-LINE Chalk Reels Focus on Speed, Line, and Durability, the Three Benefits That Are Spoken About by Nearly Every End-User
    Marking & Layout Tools www.irwin.com Marking & Layout Tools Chalk Reels IRWIN® STRAIT-LINE® Chalk Reels IRWIN® STRAIT-LINE® offers a complete line of Chalk Reels. We have been manufacturing Chalk Reels that meet and exceed end-user needs for over 50 years. IRWIN STRAIT-LINE Chalk Reels focus on speed, line, and durability, the three benefits that are spoken about by nearly every end-user. In our full-line assortment, we offer reels that range from 1:1 gear ratio, up to 6:1 gear ratio, and a blended line, which is 2x stronger than traditional Chalk Reel line. IRWIN STRAIT-LINE is the leader in Chalk Reels, and will continue to be the Chalk Reel that end-users demand. ALUMINUM Chalk Reel • 1:1 Gear ratio • Locking metal handle minimizes tangles • Durable aluminum alloy construction SPEEDLINE Chalk Reel • 3.5:1 Gear ratio • Locking metal handle minimizes tangles • Polyester line delivers 5-6 strikes per pull SPEEDLINE PRO ProTM Chalk Chalk Reel Reel • 3.5:1 Gear ratio • Twist-off cap for easy refills • Nylon/Polyester braided line for 2x durability* MACH6TM Chalk Reel • 6:1 Gear ratio MARKING & LAYOUT TOOLS • EZ Access door for quick line change • Nylon/Polyester braided line for 2x durability* Large Capacity Chalk Reel • 2:1 Gear ratio • Nylon/Polyester line is 2x stronger; resists fraying and breaking* • Durable steel crank locks securely to prevent line tangles Chalk Reel Features Aluminum Large Capacity Chalk Reel Chalk Reel Gear Ratio 3:5:1 6:1 3.5:1 3.5:1 1:1 2:1 Polyester Line X X Nylon/Polyester Line Braided Premium 2x Stronger * 2x Stronger * 2x Stronger * Case Material Aluminum Aluminum Plastic & Aluminum Plastic Aluminum Plastic Steel Handle X X X X X X Hook Wide Pronged Wide Pronged Wide Pronged Narrow Narrow Bull Ring Chalk Fill Cap ¼ Turn ¼ Turn ¼ Turn Chalk Fill Side Door Locking Locking Sliding EZ Access Door Tool-less X Metal Drive Gear X *as compared to traditional polyester line 46 www.irwin.com Marking & Layout Tools Chalk Reels IRWIN STRAIT-LINE The IRWIN STRAIT-LINE Precision chalk reel is ideal for detail finish work.
    [Show full text]