Commodity Codes

Total Page:16

File Type:pdf, Size:1020Kb

Commodity Codes Commodity Codes Commodity Co Commodity Code Title 005 Abrasives 005-05 Abrasive Equipment and Tools 005-14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 005-21 Abrasives, Sandblasting, Metal 005-28 Abrasives, Sandblasting (other Than Metal) 005-42 Abrasives, Solid: Wheels, Stones, etc. 005-56 Abrasives, Tumbling (wheel) 005-63 Grinding and Polishing Compounds: Carborundum, Diamond, etc. (for Valve Grinding Compounds See Class 075) 005-70 Pumice Stone 005-75 Recycled Abrasives Products and Supplies 005-84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool 010 Acoustical Tile, Insulating Materials, and Supplies 010-05 Acoustical Tile, All Types (including Recycled Types) 010-08 Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, Rods, Runners, Suspension Brackets, Tees, Wall Angles, and Wires 010-09 Acoustical Tile Insulation 010-11 Adhesives and Cements, Acoustical Tile 010-14 Adhesives and Cements, Insulation 010-17 Aluminum Foil, etc. 010-30 Bands, Clips, and Wires (for Pipe Insulation) 010-38 Clips, Pins, etc. (for Duct Insulation) 010-41 Cork: Blocks, Boards, Sheets, etc. 010-45 Exterior Insulation and Finish Systems 010-53 Fiberglass: Batts, Blankets and Rolls Page 1 of 344 Commodity Co Commodity Code Title 010-56 Foam Glass: Blocks, Sheets, etc. 010-57 Foam-in-place Insulation: Phenolic, Urethane, etc. 010-59 Foam Plastics: Blocks, Boards, Sheets, etc. 010-62 Insulation, Interior 010-63 Insulation, Blown Type 010-64 Insulation, Loose Fill 010-65 Jacketing (for Insulation): Canvas, Osnaburg, etc. 010-70 Magnesia: Blocks, Sheets, etc. 010-72 Mineral Wool: Blankets, Blocks, Boards 010-75 Paints, Primers, Sealers, etc. (for Insulation) 010-76 Paper Type Insulation Material (cellulose, Etc.) 010-78 Pipe and Tubing Insulation, All Types 010-81 Preformed Insulation, All Types (for Ells, Tees, Valves, Etc.) 010-83 Recycled Insulation Materials and Supplies, All Types 010-84 Rubber Insulation 015 Addressing, Copying, Mimeograph, and Spirit Duplicating Machine Supplies: Chemicals, Inks, Paper, etc. 015-06 Addressing Machine Supplies, Metal and Plastic Plate Type 015-10 Addressing Machine Supplies, Paper Plate Type 015-15 Chemicals and Supplies, Dry (for Bond Paper Type Copying Machines) 015-16 Chemicals and Supplies, Wet (for Bond Paper Type Copying Machines) 015-20 Chemicals and Supplies (for Spirit Type Duplicating Machines) 015-25 Chemicals, Inks, and Supplies (for Mimeograph Machines) 015-38 Paper, Chemicals, and Supplies (for Blueline Machines) 015-39 Paper, Chemicals, and Supplies (for Coated or Treated Paper Type Copying Machines) (see 305-39 for Diazo Process Copy Machines) Page 2 of 344 Commodity Co Commodity Code Title 015-45 Paper, Chemicals, and Supplies (for Diffusion Transfer Type Copying Machines) (see 305-39 for Diazo Process Copy Machines) 015-55 Paper and Supplies (for Dual Spectrum Process Copying Machines) (see 305-39 for Diazo Process Copy Machines) 015-70 Paper, Chemicals, and Supplies (for Thermal Process Copying Machines) (see 305-39 for Diazo Process Copy Machines) 015-77 Recycled Copying and Duplicating Supplies 019 Agricultural Crops and Grains Including Fruits, Melons, Nuts, and Vegetables 019-21 Berry Crops 019-24 Buckwheat 019-30 Corn 019-32 Cotton 019-41 Fruits, Citrus 019-42 Fruits, Deciduous Tree 019-47 Grapes 019-50 Hops 019-53 Melons 019-56 Nuts, Tree 019-60 Potatoes, Irish 019-62 Pumpkins 019-66 Rice 019-67 Rye 019-72 Sorghum 019-73 Soybeans 019-78 Sugarcane and Sugarbeets 019-85 Tobacco 019-90 Vegetables 019-94 Wheat Page 3 of 344 Commodity Co Commodity Code Title 020 Agricultural Equipment, Implements, and Accessories (see Class 022 for Parts) 020-02 Backhoe (for Farm Tractor) 020-04 Brush and Tree Chippers 020-06 Brush Cutters and Saws, Motor Driven 020-08 Components, Agricultural Equipment 020-10 Counters, Acre 020-13 Cultivating Equipment, Farm: Go-devils, Row Type Shovel Cultivators, Tooth and Spring Harrows, etc. 020-14 Curb Edger, Heavy Duty, Tractor Mounted 020-15 Cutters and Shredders (mowers), Heavy Duty, Flail: Tow Type And/or Center Mount Type 020-16 Cutters and Shredders (mowers), Heavy Duty, Reel and Rotary: Tow Type And/or Center Mount Type 020-18 Dozer Blades (for Farm Tractors) 020-20 Drying Equipment, Grain 020-23 Ensilage Cutters 020-25 Farm Wagons 020-27 Feed Mills and Mixers 020-28 Feed Wagons 020-30 Fertilizer Applicators and Fittings, Liquid and Gas 020-31 Fertilizer Distributors, Dry, Commercial (see Class 515 for Lawn Type Distributors) 020-33 Garden Tractors, Cultivators, and Plows 020-34 Gang Mowers, Reel Type, Towed 020-35 Grain Bins and Tanks 020-36 Grading Machines for Seeds, Grains and Dried Vegetables 020-37 Grass Seed Strippers and Cleaners 020-39 Grass Spriggers and Seeders 020-40 Grinding Mills: Seed, Grain, Dried Vegetable Page 4 of 344 Commodity Co Commodity Code Title 020-41 Harvesting Equipment: Bean, Corn, and Pea Pickers and Shellers, Combines, Cotton and Fruit Pickers, Headers, Sled Cutters and Threshers 020-43 Haying Equipment: Balers, Dryers, Elevators and Rakes, etc. 020-46 Herbicide, Insecticide and Fungicide Applicators and Distributors 020-49 Irrigation Equipment and Supplies, Agricultural 020-59 Land Levelers 020-61 Loaders, Tractor Mounted, Farm 020-62 Log Splitters 020-63 Manure Spreaders 020-64 Mower, Articulated Boom: Flail, Rotary, or Sickle Head 020-65 Mower (steep Slope Type With Cutter Head On Telescoping Boom): Flail, Rotary, or Sickle Bar Cutter Heads, for Mounting On Tractors or Trucks (see Class 515 for 020-66 Mower, Tractor Mounted (steep Slope Type With Cutter Head On Telescoping Boom): Flail, Rotary, or Sickle Bar Cutter Heads (see Class 515 for Lawn Type 020-67 Mower-tractor Unit or Self-propelled Mower, for Slope Mowing (see Class 515 for Lawn Type Mowers) 020-68 Mower, Center Mounted; and Tractor (see Class 515 for Lawn Type Mowers) 020-69 Pasture Renovators 020-71 Planting Equipment, Broadcasting 020-72 Planting Equipment, Drilling 020-73 Planting Equipment, Row Crop 020-74 Processing Machinery and Equipment, Agricultural 020-75 Posthole Diggers, Tractor Mounted 020-76 Protection Structures, Rollover (rops) 020-77 Pulverizers and Rotary Tillers, Soil 020-78 Recycled Agricultural Equipment Accessories and Supplies 020-79 Rock Pickers and Rakes 020-81 Rodent Control Equipment, Tractor Operated 020-82 Spade, Tree (truck or Trailer Mounted, or Three-point Hook-up for Tractor Mounting) and Other Tree Transplanting and Diggers Page 5 of 344 Commodity Co Commodity Code Title 020-83 Sweeps and Other Steel Shapes 020-84 Soil Mixers and Samplers 020-85 Terracing Equipment 020-87 Tillage Equipment, Heavy Duty, Farm: Blade Plows, Disc Harrows, Listers, Rotary Hoes, Tool Bars, etc. 020-89 Tractors, Farm, Wheel Type 020-90 Tree and Root Cutters and Stump Grinders, Tractor Mounted 020-91 Tree Girdlers and Timber Tongs 020-93 Umbrellas, Tractor 020-95 Unloaders and Elevators, Grain 020-96 Wedges, Steel, Tree Felling and Splitting 022 Agricultural Equipment and Implement Parts 022-04 Brush Chipper, Cutter and Saw Parts 022-13 Cultivating Equipment Parts 022-15 Cutter and Shredder (mower), Flail, Rotary, Reel, and Sickle Bar Parts 022-30 Fertilizer Distributor Parts 022-41 Harvesting Equipment Parts 022-42 Haying Equipment Parts 022-43 Herbicide, Insecticide and Fungicide Applicator and Distributor Parts 022-49 Implement Parts for John Deere 022-51 Implement Parts for Ford 022-53 Implement Parts for International Harvester 022-58 Implement Parts for Other Farm Equipment 022-62 Irrigation System Parts, Agricultural 022-70 Planting Equipment Parts 022-73 Posthole Digger (tractor Mounted) Parts Page 6 of 344 Commodity Co Commodity Code Title 022-74 Recycled Agricultural and Implement Parts 022-75 Sprigger and Seeder Parts, Grass 022-77 Tillage Equipment Parts 022-80 Tractor (farm and Garden) Parts 022-82 Tree Spade and Forestry Equipment Parts 022-95 Unloader and Elevator (grain) Equipment Parts 022-97 Wagon Parts 025 Air Compressors and Accessories 025-10 Compressor, Bare Unit (not Mounted or Powered), 15 Hp and Less 025-20 Compressor, Bare Unit (not Mounted or Powered), Over 15 Hp 025-30 Compressor, Base or Tank Mounted, Electric Motor or Engine Driven, 15 Hp and Less; and Parts 025-40 Compressor, Base or Tank Mounted, Electric Motor or Engine Driven, Over 15 Hp; and Parts 025-43 Compressor, High Pressure, All Sizes and Models 025-44 Compressor, Portable, Electric, Heavy-duty 025-45 Compressor, Portable, Electric Motor or Engine Driven, 5 Hp and Less; and Parts 025-50 Compressor, Portable, Electric Motor or Engine Driven, Over 25 Cfm At 100 Psi; and Parts 025-55 Dryers, Desiccant Air 025-60 Filters, Air Gauges and Valves, Pressure Regulators, Shock Mounts, etc. 025-70 Moisture Separators, Non-refrigerated 025-80 Moisture Separators, Refrigerated 025-85 Motors, Air Compressor 025-90 Recycled Air Compressor Accessories and Supplies 031 Air Conditioning, Heating, and Ventilating Equipment, Parts and Accessories (see Class 740 Also) 031-02 Air Conditioning Units, Portable (for Computer Rooms, Hospital Rooms, Sporting Events, Etc.) Page 7 of 344 Commodity Co Commodity Code Title 031-03 Air Conditioners: Commercial, and Parts and Accessories Not Individually Itemized 031-04 Air Conditioners: Controlled Environment (for Computer Rooms, Etc.), and Parts and Accessories Not Individually Itemized) 031-05 Air Conditioners (cooling and Cooling/heating Types): Window and Wall Mounted, and Parts and Accessories Not Individually Itemized 031-06 Air Conditioning and Heating: Central Units, and Parts and Accessories Not Individually Itemized
Recommended publications
  • Full Thesis Text Only
    A DIACHRONIC EXAMINATION OF THE ERECHTHEION AND ITS RECEPTION Alexandra L. Lesk, B.A., M.St. (Oxon.), M.A. Presented to McMicken College of Arts and Sciences and the Department of Classics of the University of Cincinnati in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy 2004 Committee: C. Brian Rose (Chair) Jack L. Davis Kathleen M. Lynch J. James Coulton Abstract iii ABSTRACT “A Diachronic Examination of the Erechtheion and Its Reception” examines the social life of the Ionic temple on the Athenian Akropolis, which was built in the late 5th century B.C. to house Athens’ most sacred cults and relics. Using a contextualized diachronic approach, this study examines both the changes to the Erechtheion between its construction and the middle of the 19th century A.D., as well as the impact the temple had on the architecture and art of these successive periods. This approach allows the evidence to shed light on new areas of interest such as the Post-Antique phases of the building, in addition to affording a better understanding of problems that have plagued the study of the Erechtheion during the past two centuries. This study begins with a re-examination of all the pertinent archaeological, epigraphical, and literary evidence, and proposes a wholly new reconstruction of how the Erechtheion worked physically and ritually in ancient times. After accounting for the immediate influence of the Erechtheion on subsequent buildings of the Ionic order, an argument for a Hellenistic rather than Augustan date for the major repairs to the temple is presented.
    [Show full text]
  • Injuries Associated with Posthole Diggers
    FARM MACHINERY INJURY Injuries associated with posthole diggers A report for the Rural Industries Research and Development Corporation by J Miller, L Fragar and R Franklin Published September 2006 RIRDC Publication No 06/036 RIRDC Project No US-87A © Australian Centre for Agricultural Health and Safety and Rural Industries Research and Development Corporation. All rights reserved ISBN 1 74151 299 9 ISSN 1440-6845 Farm Machinery Injury: Injuries Associated with Posthole Diggers Publication No. 06/036 Project No. US-87A The information contained in this publication is intended for general use to assist public knowledge and discussion and to help improve the development of sustainable industries. The information should not be relied upon for the purpose of a particular matter. Specialist and/or appropriate legal advice should be obtained before any action or decision is taken on the basis of any material in this document. The Commonwealth of Australia, Rural Industries Research and Development Corporation, the authors or contributors do not assume liability of any kind whatsoever resulting from any person's use or reliance upon the content of this document. This publication is copyright. However, ACAHS and RIRDC encourage wide dissemination of their research providing that these organisations are clearly acknowledged. For any other enquiries concerning reproduction contact the RIRDC Production Manager on Ph 61 (0) 2 6272 3186 or the Manager on 61 (0)2 6752 8215. Research contact details L Fragar Australian Centre for Agricultural Health and Safety University of Sydney PO Box 256 Moree NSW 2400 Australia Phone: 61 2 67528210 Fax 61 2 67526639 E-Mail: [email protected] RIRDC Contact details: Rural Industries Research and Development Corporation Level 2, 15 National Circuit BARTON ACT 2600 PO Box 4776 KINGSTON ACT 2604 Phone: 02 6272 4218 Fax: 02 6272 5877 Email: [email protected].
    [Show full text]
  • Outline of a Business Plan Plan Summary Company And
    APPENDIXB OUTLINE OF A BUSINESS PLAN A business plan is a description of your proposed or existing business and should include information on the business' products or services, markets, marketing strategies, manufacturing procedures, ownership, management structure, needs (organizational, personnel and fmancial) and projections. A well-prepared business plan serves two important functions. First, it is a basic management tool that helps guide the future direction of your company. Second, it is a mandatory document if you plan to seek business fmancing. How much detail should your business plan contain and in what order? What will help make it effective in communicating your proposed or existing company's strengths and potential? The purpose of this section of the handbook is to help you answer such questions. Not all plans need to be alike. Some sections of this outline may be more applicable to your company than others. You should make every effort to tailor your plan to your company's specific set of circumstances. PLAN SUMMARY A well-written business plan summary allows prospective lenders and investors to quickly decide if they want to examine the entire plan in detail. Therefore, your objective in the plan summary is to convince them to study the plan further. Although a plan summary appears first, it should be the last part you write. The summary should briefly highlight the key elements of your business plan and include the following points: - A brief history of your business or business concept; - A description of your products or services with emphasis on their distinguishing features, the market needs they will meet, the market potential and assessment of the competition: - How the products will be made, or services performed; - An outline of your management team's experience and talent; - A summary of your fmancial projections; and - How much money you are seeking, in what form, for what purpose and how it will be repaid.
    [Show full text]
  • Carpentry Tool List 2018-2019
    Carpentry Tool List 2021-2022 PLEASE NOTE: This Tool list/ pricing is subject to change. Students are encouraged to check with their instructor during the summer months to see if the tool list has been updated. Below are the contacts for the freshmen instructors: Dan Noel: [email protected] Timothy Draper: [email protected] Tool Description /suggested brands (Brand not mandatory) Estimated Cost ($) 1. Calculator/ Construction Master 39.00 2. 16oz Plumb Bob/ Swanson 12.60 3. 12” Combination Square/ Swanson 9.98 4. Framing Square/ high visibility / Johnson (*must have a rafter table on it*) 9.36 5. 30 foot retractable tape measure / Stanley 25.47 6. 100 foot steel tape / Stanley 26.72 7. Sliding T-bevel/ Johnson 9.84 8. Chalk Line/ Stanley FatMax 100’ line w/ red or blue chalk 12.98 9. Dry Line #18 x 250’ 12.98 10. Crosscut Handsaw (suggested 12 point, 20” long)/ Stanley or Irwin 23.52 11. Drywall Saw/ Stanley Jab Saw 12.31 12. 12 inch Steel Spackling Mud Pan/ Wal-board 13.98 13. Drywall Knives/ Wal-board/ 4” ($8.95), 6” ($9.50) 8” ( $10.00) & 10” ($11.50) 38.00 14. 10 ounce Caulk Gun/ Workforce 13.97 15. 3 Piece Nail Set/ DeWalt 8.97 16. ½” Countersink or rosebud bit 5.00 17. Pencil Compass/ Scriber/ General Tool 843/1 3.00 18. 10” Cat’s Paw (nail puller) Bostitch 12.98 19. 15” Wonder Bar/ Flat Bar/ Vaughan 12.98 20. Utility Knife (with retractable blade)/ Stanley 3.98 21. Coping Saw w/replacement blades/ Irwin 5.98 22.
    [Show full text]
  • American FLAT BOW
    OUTDOOR SPORTS Now you can shoot THE NEW American FLAT BOW HEN the white man provided the American Indian with a cheap trade musket in place of his native bow and arrow, he saved himself a good deal of grief, for had the red man de- velopewd his weapon along a logical path he might have arrived at an approximation of the bow we now know as the "semi- Indian," "flat," or "American" bow. With such a bow he could have shot with accuracy at a hundred yards (about the extreme The completed bow bends accurate range of the long rifle), and could have delivered ar- perfectly, shoots far, rows faster than any frontier scout could load his rifle. and hits hard. Robin Hood himself never had Any home workman, equipped with ordinary tools, can readily so scientific a weapon. build the most modern and most efficient bow yet designed. The This illustration shows best material for the amateur is the imported wood known as the bow drawn back al- "lemonwood." It can be worked almost entirely by measure- most to the "full draw" ment, without much regard to the grain. California yew and Osage orange probably make a better bow, but not for the inexperienced builder. Lemonwood can be had from most dealers in archery sup- plies, either in the rough stave or cut to approximate outline. The price ranges from about $1.75 to $3. In ordering you should be careful to say you need a wide stave for a flat bow. The dimensions given are for a bow 5 ft.
    [Show full text]
  • How to Choose the Right Mineral Wool for Insulation How to Choose the Right Mineral Wool for Insulation
    ADVERTORIAL BUILDING INSULATION TECHNICAL INSULATION How to Choose the Right Mineral Wool for Insulation How to Choose the Right Mineral Wool for Insulation 3 20 How to Choose the Right The Manufacturing Process Mineral Wool for Insulation of ROCKWOOL Stone Wool 4 22 Fire Safety and Resistance Application of ROCKWOOL to High Temperatures Stone Wool Products 10 Usage and Maintenance of the Buildings 12 Efficiencies and Cost Savings 13 Mechanical Properties of Mineral Wool 15 Designed Occupancy Comfort Level 18 Green Product and Sustainability 2 How to Choose the Right Mineral Wool for Insulation How to choose the right mineral wool for insulation Mineral wool is commonly used as an insulation material in buildings and built structures. There are different types of mineral wool, produced from a variety of production methods and technologies and are generally available in a wide variety of forms. A key consideration for designers, consultants, builders and building owners when choosing the right type of mineral wool insulation is to ensure that it meets their requirements on application and design parameters. Based on industry practices and contemporary building design that focuses on values and benefits mineral wool is used within building elements to perform and complement these conditions: Fire safety and resistance to high temperatures Usage and maintenance of the buildings Efficiencies and cost savings Designed occupancy comfort level Green product and sustainability The samples that were studied in this document draw references to commonly available mineral wool and its applications within buildings, tabulated in the table below. ROCKWOOL stone wool 40-60kg/m3 Drywall partition and single skin roof Elaborations and data shown in this document are based on third party laboratory and ROCKWOOL internal tests where empirical 60kg/m3 and above Double skin roof estimation and calculations are made.
    [Show full text]
  • Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko
    Craft History and the Merging of Tool Traditions: Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko Sinoto Alexander Spoehr For centuries the Japanese have made extensive use of wood as the main raw material in the construction of houses and their furnishings, temples, shrines, and fishing boats. As a wood-worker, the carpenter is one of the most ancient of Japanese specialists. He developed a complex set of skills, a formidable body of technical knowledge, and a strong tradition of craftsmanship to be seen and appreciated in the historic wood structures of contemporary Japan.1 The first objective of this study of carpenters of Japanese ancestry in Hawaii is to throw light on how the ancient Japanese craft of carpentry was transplanted from Japan to a new social, cultural, and economic environment in Hawaii through the immigration of Japanese craftsmen and the subsequent training of their successors born in Hawaii. Despite its importance for the understanding of economic growth and develop- ment, the craft history of Hawaii has not received the attention it deserves. The second objective of the study is more anthropological in nature and is an attempt to analyze how two distinct manual tool traditions, Japanese and Western, met and merged in Hawaii to form a new composite tool tradition. This aspect of the study falls in a larger field dealing with the history of technology and of tool traditions in general. Carpentry today, both in Japan and in the United States, relies heavily on power rather than hand tools. Also, carpenters tend to be specialized, and construction is to a major degree a matter of assembling prefabricated parts.
    [Show full text]
  • 300 Series Two Man Hole Diggers Operator Manuals
    OPERATOR MANUAL Includes Safety, Service and Replacement Part Information 300 Series Hole Diggers Models: 330H, 343H, 357H Form: GOM12070702 Version 1.2 Do not discard this manual. Before operation, read and comprehend its contents. Keep it readily available for reference during operation or when performing any service related function. When ordering replacement parts, please supply the following information: model number, serial number and part number. For customer service assistance, telephone 800.533.0524, +507.451.5510. Our Customer Service Department telefax number is 877.344.4375 (DIGGER 5), +507.451.5511. There is no charge for customer service activities. Internet address: http://www.generalequip.com. E-Mail: [email protected]. The products covered by this manual comply with the mandatory requirements of 98/37/EC. Copyright 2009, General Equipment Company. Manufacturers of light construction equipment Congratulations on your decision to purchase a General light construction product. From our humble beginnings in 1955, it has been a continuing objective of General Equipment Company to manufacture equipment that delivers uncompromising value, service life and investment return. Because of this continuous commitment for excellence, many products bearing the General name actually set the standards by which competitive products are judged. When you purchased this product, you also gained access to a team of dedicated and knowledgeable support personnel that stand willing and ready to provide field support assistance. Our team of sales representatives and in house factory personnel are available to ensure that each General product delivers the intended performance, value and investment return. Our personnel can readily answer your concerns or questions regarding proper applications, service requirements and warranty related problems.
    [Show full text]
  • Football Officiating Manual
    FOOTBALL OFFICIATING MANUAL 2020 HIGH SCHOOL SEASON TABLE OF CONTENTS PART ONE: OFFICIATING OVERVIEW .............................................................................. 1 INTRODUCTION ........................................................................................................................ 2 NATIONAL FEDERATION OFFICIALS CODE OF ETHICS ........................................... 3 PREREQUISITES AND PRINCIPLES OF GOOD OFFICIATING ................................. 4 PART TWO: OFFICIATING PHILOSOPHY ......................................................................... 6 WHEN IN QUESTION ............................................................................................................... 7 PHILOSOPHIES AND GUIDANCE ........................................................................................ 8 BLOCKING .................................................................................................................................... 8 A. Holding (OH / DH) ............................................................................................................. 8 B. Blocking Below the Waist (BBW) ..................................................................................... 8 CATCH / RECOVERY ................................................................................................................... 9 CLOCK MANAGEMENT ............................................................................................................. 9 A. Heat and Humidity Timeout ............................................................................................
    [Show full text]
  • BID TABULATION #2836 OFFICE SUPPLIES Req/PO #: 176688
    BID TABULATION #2836 OFFICE Req/PO #: 176688 2/19/21 SUPPLIES PYRAMID SOUTHWEST ACCO SCHOOL & OFFICE LN Qty Unit Description/Product ID BRANDS BRAND BRAND SCHOOL BRAND QUILL BRAND OFFICE BRAND DEPOT USA PRODUCT SUPPLIES S 1 96 EA 1510015 NO BID $3.81 $3.72 07 $5.60 8 $4.40 03 WASTEBASKET, RECTANGULAR PLASTIC 12 3/4"DIA X 16 2818BK 12/CAS 1/4"H, 7 GALLON, GRAY OR BLACK E BLACK ,***1510015 99 OR EQUAL 01 RUBBERMAID #2830 02 LOMA 823 03 RUBBERMAID 2956 0415X11X15 TENEX RECTANGULAR16024 RECT. 7 05GAL RUBBERMAID 69179 06 RUBBERMAID 69176 07(BLACK) CONTINENTAL 221-481 2818BK 08 COASTWIDE 124867 2 96 EA 1510035 NO BID $3.41 99 NO BID NO BID $3.55 04 BOOK, CLASS RECORD, TEACHER'S, K-12, SPIRAL WARD BOUND ,***1510035 HUBBARD HUB910L SKU#365 930 99 OR APPROVED EQUAL ***Wasn 01 GEOGRAPHY WORK BOOK 02COMPANY EASTMAN #201 ER110 03 WEBBER P3-206030 04 IMPERIAL 11300 PYRAMID SOUTHWEST ACCO SCHOOL & OFFICE LN Qty Unit Description/Product ID BRANDS BRAND BRAND SCHOOL BRAND QUILL BRAND OFFICE BRAND DEPOT USA PRODUCT SUPPLIES S 051510015 HAMMOND & STEVENS 610- 06PWASTEBASKET, ELAN R1010 RECTANGULAR PLASTIC 12 3/4"DIA X 16 1/4"H,07 TOPS41200 7 GALLON, (524- GRAY OR 3 2100 PKG BLACK1510040975)/NOT ,***1510015 ACCEPTABLE NO BID $17.16 NO BID $5.22 5 $6.50 06 BOOK, COMPOSITION, 40 SHEET/80PAGE ,10 X 8", EACH LINNET COVERING, FAINT PRICE RULING, 12 PER ,***1510040 99 OR EQUAL 02 MEAD 09-4075 03 CLASSMATE #1040 04 PRUDENTIAL FEIDCO 0522571 AVERY 43-461 06 IMPERIAL 1142 40M 07 EVERETTE 1040 11 SOUTHWEST 114240M 4 300 PKG 1510045 NO BID $3.58 99 NO BID NO BID $3.90 08 BOOK, DAILY LESSON PLAN 11 X 9 3/8", 52 SHEETS, WARD TWIN WIRE, 7 PERIODS HUBBARD ,***1510045 HUB18 SKU#365 846 99 OR EQUAL ***Wasn 01 WESTAB INC #50-1500 02 MEAD 50-1500 03 G W SCHOOL SUPPLY 04 PAC.
    [Show full text]
  • Sound Absorption Coefficients Table
    ABSORPTION COEFFICIENTS www.akustik.ua FREQUENCY Hz MATERIAL THICKNESS 125 250 500 1000 2000 4000 MASONRY WALLS Rough concrete 0,02 0,03 0,03 0,03 0,04 0,07 Smooth unpainted concrete 0,01 0,01 0,02 0,02 0,02 0,05 Smooth concrete, painted or glazed 0,01 0,01 0,01 0,02 0,02 0,02 Porous concrete blocks (no surface finish) 0,05 0,05 0,05 0,08 0,14 0,2 Clinker concrete (no surface finish) 0,10 0,20 0,40 0,60 0,50 0,60 Smooth brickwork with flush pointing 0,02 0,03 0,03 0,04 0,05 0,07 Smooth brickwork with flush pointing, painted 0,01 0,01 0,02 0,02 0,02 0,02 Standard brickwork 0,05 0,04 0,02 0,04 0,05 0,05 Brickwork, 10mm flush pointing 0,08 0,09 0,12 0,16 0,22 0,24 Lime cement plaster on masonry wall 0,02 0,02 0,03 0,04 0,05 0,05 Glaze plaster on masonry wall 0,01 0,01 0,01 0,02 0,02 0,02 Painted plaster surface on masonry wall 0,02 0,02 0,02 0,02 0,02 0,02 Plaster on masonry wall with wall paper on backing paper 0,02 0,03 0,04 0,05 0,07 0,08 Ceramic tiles with smooth surface 0,01 0,01 0,01 0,02 0,02 0,02 Breeze block 0,20 0,45 0,60 0,40 0,45 0,40 Plaster on solid wall 0,04 0,05 0,06 0,08 0,04 0,06 Plaster, lime or gypsum on solid backing 0,03 0,03 0,02 0,03 0,04 0,05 STUDWORK AND LIGHTWEIGHT WALLS Plasterboard on battens, 18mm airspace with glass wool 0,30 0,20 0,15 0,05 0,05 0,05 Plasterboard on frame, 100mm airspace 0,30 0,12 0,08 0,06 0,06 0,05 Plasterboard on frame, 100mm airspace with glass wool 0,08 0,11 0,05 0,03 0,02 0,03 Plasterboard on 50mm battens 0,29 0,10 0,05 0,04 0,07 0,09 Plasterboard on 25mm battens 0,31 0,33 0,14 0,10 0,10
    [Show full text]
  • TV CHANNEL LINEUP by Channel Name
    TV CHANNEL LINEUP By Channel Name: 34: A&E 373: Encore Black 56: History 343: Showtime 2 834: A&E HD 473: Encore Black HD 856: History HD 443: Showtime 2 HD 50: Freeform 376: Encore Suspense 26: HLN 345: Showtime Beyond 850: Freeform HD 476: Encore Suspense 826: HLN HD 445: Showtime Beyond HD 324: ActionMax 377: Encore Westerns 6: HSN 341: Showtime 130: American Heroes Channel 477: Encore Westerns 23: Investigation Discovery 346: Showtime Extreme 930: American Heroes 35: ESPN 823: Investigation Discovery HD 446: Showtime Extreme HD Channel HD 36: ESPN Classic 79: Ion TV 348: Showtime Family Zone 58: Animal Planet 835: ESPN HD 879: Ion TV HD 340: Showtime HD 858: Animal Planet HD 38: ESPN2 2: Jewelry TV 344: Showtime Showcase 117: Boomerang 838: ESPN2 HD 10: KMIZ - ABC 444: Showtime Showcase HD 72: Bravo 37: ESPNews 810: KMIZ - ABC HD 447: Showtime Woman HD 872: Bravo HD 837: ESPNews HD 9: KMOS - PBS 347: Showtime Women 45: Cartoon Network 108: ESPNU 809: KMOS - PBS HD 22: Smile of a Child 845: Cartoon Network HD 908: ESPNU HD 5: KNLJ - IND 139: Sportsman Channel 18: Charge! 21: EWTN 7: KOMU - CW 939: Sportsman Channel HD 321: Cinemax East 62: Food Network 807: KOMU - CW HD 361: Starz 320: Cinemax HD 862: Food Network HD 8: KOMU - NBC 365: Starz Cinema 322: Cinemax West 133: Fox Business Network 808: KOMU - NBC HD 465: Starz Cinema HD 163: Classic Arts 933: Fox Business Network HD 11: KQFX - Fox 366: Starz Comedy 963: Classic Arts HD 48: Fox News Channel 811: KQFX - Fox HD 466: Starz Comedy HD 17: Comet 848: Fox News Channel HD 13: KRCG
    [Show full text]