IRWIN STRAIT-LINE Chalk Reels Focus on Speed, Line, and Durability, the Three Benefits That Are Spoken About by Nearly Every End-User

Total Page:16

File Type:pdf, Size:1020Kb

IRWIN STRAIT-LINE Chalk Reels Focus on Speed, Line, and Durability, the Three Benefits That Are Spoken About by Nearly Every End-User Marking & Layout Tools www.irwin.com Marking & Layout Tools Chalk Reels IRWIN® STRAIT-LINE® Chalk Reels IRWIN® STRAIT-LINE® offers a complete line of Chalk Reels. We have been manufacturing Chalk Reels that meet and exceed end-user needs for over 50 years. IRWIN STRAIT-LINE Chalk Reels focus on speed, line, and durability, the three benefits that are spoken about by nearly every end-user. In our full-line assortment, we offer reels that range from 1:1 gear ratio, up to 6:1 gear ratio, and a blended line, which is 2x stronger than traditional Chalk Reel line. IRWIN STRAIT-LINE is the leader in Chalk Reels, and will continue to be the Chalk Reel that end-users demand. ALUMINUM Chalk Reel • 1:1 Gear ratio • Locking metal handle minimizes tangles • Durable aluminum alloy construction SPEEDLINE Chalk Reel • 3.5:1 Gear ratio • Locking metal handle minimizes tangles • Polyester line delivers 5-6 strikes per pull SPEEDLINE PRO ProTM Chalk Chalk Reel Reel • 3.5:1 Gear ratio • Twist-off cap for easy refills • Nylon/Polyester braided line for 2x durability* MACH6TM Chalk Reel • 6:1 Gear ratio MARKING & LAYOUT TOOLS • EZ Access door for quick line change • Nylon/Polyester braided line for 2x durability* Large Capacity Chalk Reel • 2:1 Gear ratio • Nylon/Polyester line is 2x stronger; resists fraying and breaking* • Durable steel crank locks securely to prevent line tangles Chalk Reel Features Aluminum Large Capacity Chalk Reel Chalk Reel Gear Ratio 3:5:1 6:1 3.5:1 3.5:1 1:1 2:1 Polyester Line X X Nylon/Polyester Line Braided Premium 2x Stronger * 2x Stronger * 2x Stronger * Case Material Aluminum Aluminum Plastic & Aluminum Plastic Aluminum Plastic Steel Handle X X X X X X Hook Wide Pronged Wide Pronged Wide Pronged Narrow Narrow Bull Ring Chalk Fill Cap ¼ Turn ¼ Turn ¼ Turn Chalk Fill Side Door Locking Locking Sliding EZ Access Door Tool-less X Metal Drive Gear X *as compared to traditional polyester line 46 www.irwin.com Marking & Layout Tools Chalk Reels IRWIN STRAIT-LINE The IRWIN STRAIT-LINE Precision chalk reel is ideal for detail finish work. Designed with a smooth 3.5:1 gear system, this advanced chalk reel retrieves line up to 3.5 times faster than traditional models. Its metal plates and handle, plus premium thin line, provide extra strength for unrivaled durability. The tool-less EZ Access Door allows for easy entry into the back of the chalk reel to Chalk Reel change or clean the line. [1] PRECISION CHALK REEL FEATURES 1 mm 0.040" 1. Nylon/Polyester Braided Line Thin Line delivers multiple snaps of 1mm (0.040") thickness, available in [2] 1mm or 0.5mm (0.020") thickness 2. 3.5:1 Gear Ratio rewinds 3x faster* for increased productivity 3. Aluminum Housing for increased [3] MARKING & LAYOUT TOOLS durability and greater impact Tool-less EZ resistance [4] Access Door 4. Large Steel Handle for increased durability and strength Chalk Reels Bulk Pack Length Description Item # Item # Qty Reels 50' Aluminum Chalk Line Reel - Carded (1:1) 63950 — 6 64110 100' Aluminum Chalk Line Reel - Carded (1:1) 64110 64111 6/24 100' Speed-Line Chalk Reel - Carded (3.5:1) 64310 64311 6/24 100' Speed-Line Pro Chalk Reel - Carded (3.5:1) 2031318DS 2031321B 6/24 100' MACH6 Chalk Reel - Carded (6:1) 2031314DS 2031317B 6/24 100' Precision Chalk Reel 2031322 — 6 64310 150' Large Capacity Chalk Reel (2:1) 2031311 — 2 Combos 100' Aluminum Reel & 4 oz. Standard Blue Chalk (1:1) 64499 — 3 100' Aluminum Reel & 4 oz. Hi-Visibility Orange Chalk (1:1) 64497 — 3 2031318DS 100' Aluminum Reel & 4 oz. Permanent Red Chalk (1:1) 64498 — 3 100' Speed-Line Chalk Reel & 4 oz. Standard Blue Chalk (3.5:1) 64494 — 3 100' Speed-Line Chalk Reel & 4 oz. Permanent Red Chalk (3.5:1) 64495 — 3 100' Speed-Line Pro Chalk Reel & 4 oz. Standard Blue Chalk (3.5:1) 2031319DS — 8 100' Speed-Line Pro Chalk Reel & 4 oz. Permanent Red Chalk (3.5:1) 2031320DS — 8 2031314DS 100' MACH6 Chalk Reel & 4 oz. Standard Blue Chalk (6:1) 2031315DS — 8 100' MACH6 Chalk Reel & 4 oz. Permanent Red Chalk (6:1) 2031316DS — 8 Replacement Lines 50' Replacement Line - Polyester 64550 — 6 100' Replacement Line - Polyester 64610 — 6 2031322 100' Speed-Line Pro and MACH6 Replacement Line - Nylon/Polyester 2031333 — 6 100' Premium thin chalk reel replacement line - 1.0 mm Thickness 2031323 — 6 100' Premium ultra thin chalk reel replacement line - 0.5 mm Thickness 2031324 — 6 150 Replacement Line - Lrg. Cap. Chalk Reel (2031311) - Nylon/Polyester 2031313 — 1 2031311 *as compared to traditional chalk reels 800.866.5740 47 Marking & Layout Tools Marking Chalk STRAIT-LINE® Marking Chalk Description Item # Shelf Pack Keep The Chalk Where You Want It Dust-Off Marking Chalk ® ® 8 oz. - Light Violet - Dust-Off 2032170 6 IRWIN STRAIT-LINE marking chalks have a newly 5 lb. - Light Violet - Dust-Off 2032177 4 engineered flip-top cap that keeps the chalk in the bottle Standard Marking Chalk where you want it and stops it from spilling out in areas that 4 oz. - Blue Chalk - Standard 64801 6 you don’t. The flip-top cap, available on all IRWIN STRAIT- 8 oz. - White Chalk - Standard 64904 6 LINE chalk bottles, seals the chalk in an airtight chamber, 8 oz. - Blue Chalk - Standard 64901 6 keeping out moisture and reducing the risk of clumping. 2.5 lb. - Blue Chalk - Standard 65201 6 5 lb. - White Chalk - Standard 65104 4 The Right Chalk for Every Job 5 lb. - Blue Chalk - Standard 65101 4 The IRWIN STRAIT-LINE range of category-leading marking Hi-Visibility Marking Chalk products include Dust-off Chalk and Permanent Staining 8 oz. - Yellow Chalk - Hi-Vis 64903 6 8 oz. - Orange Chalk - Hi-Vis 64905 6 Chalk. Dust-Off Chalk is temporary chalk that can be used to 8 oz. - Green Chalk - Hi-Vis 64907 6 mark interior walls and trim and then wiped away cleanly. 2.5 lb. - Orange Chalk - Hi-Vis 65205 6 Permanent Staining chalk is great for extreme outdoor 5 lb. - Yellow Chalk - Hi-Vis 65103 4 conditions because it can withstand harsh weather conditions 5 lb. - Orange Chalk - Hi-Vis 65105 4 and months of jobsite wear. 5 lb. - Green Chalk - Hi-Vis 65106 4 Permanent Marking Chalk In addition to Dust-Off and Permanent Staining, the range of 4 oz. - Red Chalk - Permanent 64802 6 chalk has varying levels of permanence, color and special uses. 8 oz. - Red Chalk - Permanent 64902 6 So whether working indoors or outdoors, on finished surfaces 8 oz. - Black Chalk - Permanent 64908 6 or in extreme conditions, IRWIN STRAIT-LINE has the ideal 2.5 lb. - Red Chalk - Permanent 65202 6 chalk for every job. 2.5 lb. - Black Chalk - Permanent 65207 6 5 lb. - Red Chalk - Permanent 65102 4 5 lb. - Black Chalk - Permanent 2032160 4 Permanent Staining Marking Chalk 8 oz. - Indigo Blue - Permanent Staining 2032171 6 8 oz. - Crimson Red - Permanent Staining 2032172 6 6 oz. - Midnight Black - Permanent Staining 4935520 6 2.5 lb. - Indigo Blue - Permanent Staining 2032174 6 2 lb. - Crimson Red - Permanent Staining 4935522 6 2.5 lb. - Midnight Black - Permanent Staining 2032176 6 MARKING & LAYOUT TOOLS 4 lb. - Indigo Blue - Permanent Staining 4935524 4 5 lb. - Crimson Red - Permanent Staining 2032179 4 5 lb. - Midnight Black - Permanent Staining 2032180 4 LOW HIGH Marking Low P ERMAPERMANENCYNENC SCALEY SCALE High Chalk Color Permanence & DUST-OFF STANDARD HI-VISIBILITY PERMANENT EXTREME CONDITIONS Application Guide 00 2 3 4 11 2 3 4 0 1 22 3 4 0 1 2 33 4 0 1 2 3 44 INDOOR INDOOR/ OUTDOOR WEEKS MONTHS OUTDOOR OUTDOORS OUTDOORS · Eliminates need for · Low light conditions priming before painting · Temporary marking chalk · Weather resistant lines · Withstands months of remain visible after weeks weather and jobsite of weather and jobsite wear and tear wear and tear COLORS COLORS COLORS COLORS COLORS 48 www.irwin.com Marking & Layout Tools Crayons / Markers / Pencils / Soapstone / Plumb Bobs ® STRAIT-LINE Lumber Crayons Carded Bulk Description Color Qty. Item # Item # 4-1/2" Wax Based Lumber Crayon Red 12-pc — 66401 66401 Blue 12-pc — 66402 Green 12-pc — 66403 Black 12-pc — 66404 • For use on oily, slick, wet, cold or dry surfaces White 12-pc — 66405 • Ideal for lumber, concrete, ceramics, rubber, metal, paper & Yellow 12-pc — 66406 cardboard 4-1/2" Wax Based Lumber Crayon Red 2-pc 666012 — • Non-toxic, waterproof Black 2-pc 666042 — Yellow 2-pc 666062 — 4-1/2" Wax Based Lumber Crayon Red 6-pc 66501 — Yellow 6-pc 66506 — Lumber Crayon Holder — — 66510 — ® SHARPIE China Markers Bulk Description Color Qty. Item # China Marker Red 12-pc 2059 2089 Black 12-pc 2089 • Ideal for writing on china, glass, metal or plastic White 12-pc 2060 • Marks on porous and non-porous surfaces • Fade and moisture resistant • Write length of 2500 ft. MARKING & LAYOUT TOOLS STRAIT-LINE Carpenter Pencils & Sharpener Carded Bulk Description Qty. Item # Item # Soft Lead Carpenter Pencil 12-pc — 66301 Medium Lead Carpenter Pencil Box of 72 — 66305SL Medium Lead Carpenter Pencil 12-pc — 66300 66300 Medium Lead Carpenter Pencil 6-pc 66400 — Hard Lead Carpenter Pencil 12-pc 66302 • 7" overall length pencil — Carpenter Pencil Sharpener 25-pc — 233250 233250 STRAIT-LINE Chalk Markers & Soapstone Bulk Description Color Qty. Item # Soapstone 5" x 1/2" x 3/16" White 144 2033500 Railroad Chalk White 144 2032150 2033500 Half Moon Carpenter Chalk Blue 144 2032101 • For temporary marking on metal surfaces • Made of natural soapstone for superior marking Hexagon Plumb Bobs Carded Description Weight Qty.
Recommended publications
  • Carpentry Tool List 2018-2019
    Carpentry Tool List 2021-2022 PLEASE NOTE: This Tool list/ pricing is subject to change. Students are encouraged to check with their instructor during the summer months to see if the tool list has been updated. Below are the contacts for the freshmen instructors: Dan Noel: [email protected] Timothy Draper: [email protected] Tool Description /suggested brands (Brand not mandatory) Estimated Cost ($) 1. Calculator/ Construction Master 39.00 2. 16oz Plumb Bob/ Swanson 12.60 3. 12” Combination Square/ Swanson 9.98 4. Framing Square/ high visibility / Johnson (*must have a rafter table on it*) 9.36 5. 30 foot retractable tape measure / Stanley 25.47 6. 100 foot steel tape / Stanley 26.72 7. Sliding T-bevel/ Johnson 9.84 8. Chalk Line/ Stanley FatMax 100’ line w/ red or blue chalk 12.98 9. Dry Line #18 x 250’ 12.98 10. Crosscut Handsaw (suggested 12 point, 20” long)/ Stanley or Irwin 23.52 11. Drywall Saw/ Stanley Jab Saw 12.31 12. 12 inch Steel Spackling Mud Pan/ Wal-board 13.98 13. Drywall Knives/ Wal-board/ 4” ($8.95), 6” ($9.50) 8” ( $10.00) & 10” ($11.50) 38.00 14. 10 ounce Caulk Gun/ Workforce 13.97 15. 3 Piece Nail Set/ DeWalt 8.97 16. ½” Countersink or rosebud bit 5.00 17. Pencil Compass/ Scriber/ General Tool 843/1 3.00 18. 10” Cat’s Paw (nail puller) Bostitch 12.98 19. 15” Wonder Bar/ Flat Bar/ Vaughan 12.98 20. Utility Knife (with retractable blade)/ Stanley 3.98 21. Coping Saw w/replacement blades/ Irwin 5.98 22.
    [Show full text]
  • American FLAT BOW
    OUTDOOR SPORTS Now you can shoot THE NEW American FLAT BOW HEN the white man provided the American Indian with a cheap trade musket in place of his native bow and arrow, he saved himself a good deal of grief, for had the red man de- velopewd his weapon along a logical path he might have arrived at an approximation of the bow we now know as the "semi- Indian," "flat," or "American" bow. With such a bow he could have shot with accuracy at a hundred yards (about the extreme The completed bow bends accurate range of the long rifle), and could have delivered ar- perfectly, shoots far, rows faster than any frontier scout could load his rifle. and hits hard. Robin Hood himself never had Any home workman, equipped with ordinary tools, can readily so scientific a weapon. build the most modern and most efficient bow yet designed. The This illustration shows best material for the amateur is the imported wood known as the bow drawn back al- "lemonwood." It can be worked almost entirely by measure- most to the "full draw" ment, without much regard to the grain. California yew and Osage orange probably make a better bow, but not for the inexperienced builder. Lemonwood can be had from most dealers in archery sup- plies, either in the rough stave or cut to approximate outline. The price ranges from about $1.75 to $3. In ordering you should be careful to say you need a wide stave for a flat bow. The dimensions given are for a bow 5 ft.
    [Show full text]
  • Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko
    Craft History and the Merging of Tool Traditions: Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko Sinoto Alexander Spoehr For centuries the Japanese have made extensive use of wood as the main raw material in the construction of houses and their furnishings, temples, shrines, and fishing boats. As a wood-worker, the carpenter is one of the most ancient of Japanese specialists. He developed a complex set of skills, a formidable body of technical knowledge, and a strong tradition of craftsmanship to be seen and appreciated in the historic wood structures of contemporary Japan.1 The first objective of this study of carpenters of Japanese ancestry in Hawaii is to throw light on how the ancient Japanese craft of carpentry was transplanted from Japan to a new social, cultural, and economic environment in Hawaii through the immigration of Japanese craftsmen and the subsequent training of their successors born in Hawaii. Despite its importance for the understanding of economic growth and develop- ment, the craft history of Hawaii has not received the attention it deserves. The second objective of the study is more anthropological in nature and is an attempt to analyze how two distinct manual tool traditions, Japanese and Western, met and merged in Hawaii to form a new composite tool tradition. This aspect of the study falls in a larger field dealing with the history of technology and of tool traditions in general. Carpentry today, both in Japan and in the United States, relies heavily on power rather than hand tools. Also, carpenters tend to be specialized, and construction is to a major degree a matter of assembling prefabricated parts.
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • Download Entire Issue As A
    THIS ISSUE’S PROJECT SPOTLIGHT: SOLDERED-SEAM COPPER GLENRIDGE HALL RE-SLATING PROJECT SANDY SPRINGS, GA ROOFS The R.W. Stokes Company, Atlanta, GA • Page 9 Many old slate and tile roofs have low-slope “sol- See page 9 dered-seam” metal roofs abutting or adjoining them. They’re usually found on porches, bay windows, mansard roofs, and two-story additions and are most often made of terne metal pans, and sometimes copper pans, soldered at their flat-lock seams, hence the name “soldered- seam,” “lock-seam,” or “flat-lock” roofs. The best way to repair a leaking soldered- seam metal roof... (CONTINUED ON PAGE 10) Demo soldered-seam copper roof section under con- struction at a workshop conducted by Jenkins Slate Above: Manuel Avila, crew foreman (left); Ron Stokes, owner of The Roofing Services, Grove City, PA, and taught by Keith Schorr of Butler, PA, R.W. Stokes Co., (center); and Juan Avila (right), re-slating Glenridge showing drip edge and one pan installed over rosin paper (above). Hall. Participants included (left to right, below) Doug Lodge, Keith Schorr (with hat), Dave Kunz, Brent Ulisky, Barry Smith, Stacy Moore, and Orion Below: Staggered butt and ragged butt slating styles yield roofs that are Jenkins, all gathered around the finished roof section. This workshop will both functional as well as artistic. See page 3 for hints on how to install soon be available on videotape — stay tuned at jenkinsslate.com. this sort of slate roof. Staggered Butt Slating See page 3 See page 10 Prsrt Std U.S. Postage PAID SlateRoofWarehouse.com Gibsonia, PA Permit No.
    [Show full text]
  • Korowood™ Handrails
    KOROWOOD™ HANDRAILS HW70 Handrail Recommended Installer Qualifications:Only those parties experienced in working with finished fine wood products should engage in installing Korowood™ Handrail. Recommended Installation Equipment: Radial Arm Saw or Power Miter Box with 12” (304.8mm) sharp carbide-tipped Alternating Tooth Bevel-Positive Hook 80-100 teeth blade, Tape Measure, Level, Chalk Line, Utility Knife, Drill, Drill Bits, Screwdriver, Sanding Block, Wood Glue, Removable Marker, Cleaning Cloth, and Suitable 1/4” (6.35mm) x 4” (101.6mm) Long Mounting Fasteners. 1. Locate and install Korowood Handrail in accordance with architectural drawings and specifications. When required, Korogard shop drawings should be used in conjunction with these documents. 2. Lay out work to be completed, including all component parts, along base of substrate (wall). Check material for any damage that may have occurred during shipment and/or handling at job site. 3. Snap chalk line at proper location on substrate to ensure level installation. Chalk line should be calculated to center line of mounting bracket wall fasteners. Note: Chalk line will be visible after installation and must be removed at cleanup. 4. Determine cut length of rail by locating ends on substrate, measure distance, and allow 3-1/2” (88.9mm) at end returns, 3” (76.2mm) at substrate inside corners, and 0” (0mm) at substrate outside corners. Mark Handrail at face of wood and miter-cut rail in appropriate direction to appropriate length. Miter ends at end returns and outside corners to 22-1/2˚ and ends at inside corners to 45˚ (see details). Use care to assure accurate and clean cuts.
    [Show full text]
  • The Chalk Line (1931)
    East Tennessee State University Digital Commons @ East Tennessee State University ETSU Yearbooks University Archives 1931 The Chalk Line (1931) East Tennessee State University Follow this and additional works at: https://dc.etsu.edu/yearbooks Part of the Higher Education Commons Recommended Citation The Chalk Line (1931), Archives of Appalachia, East Tennessee State University https://dc.etsu.edu/yearbooks/17 This Book is brought to you for free and open access by the University Archives at Digital Commons @ East Tennessee State University. It has been accepted for inclusion in ETSU Yearbooks by an authorized administrator of Digital Commons @ East Tennessee State University. For more information, please contact [email protected]. / -===----~ ~~ ~~:§] ~ _l)~l] -----· I SEN I. 1 • ;_]) itur Senior Issue Published by the Graduating Classes STATE TEACHERS COLLEGE Johnson City, Tennessee June and August, 1931 SPONSORED BY W. B. BIBLE 2 THE CHALK LINE June 5, 1931 ~ I­ _] ~ CJ <( u.. l n June 5, 1931 THE CHAL K LIN E 3 W4r ill4allt ( S 11ccial SttiD) ( Ucgulur Stu.ff) EDl1'0US-IN-CHIEJ<' JESSIE SNIEGOCKI FRANCES JACKSON ASSOCIATE' EDITORS L. E. HARVILLE SUSIE BERRY T. S. GARDNER L. E. HARVILLE J ESSIE SNIEGOCKl LITERARY EDITORS DOROTHY MAY INEZ ANDREGG GRACE HAMMER EDRTE MATTHEWS MARGARET REMINE ATHLE'l'IC EDITORS FRANK BRYANT VIRGINIA PARKER KATHLEEN CONNER SAM WARD CHARLES SPEAR ALUMNI EDITORS DELMAS LAWS DESSIE DEAKINS BERTHA JUNE TILEMAN DELMAS LAWS CAMPUS EDITORS KATHLEEN SMITH MI LDRED ELLISON LORA BELLE GRUBB LORA BELLE GRUBB VERDEL NICLEY LOUISE IRWIN JOKE EDITORS JAMES R. LARGE KATHLEEN CONNER ROSALIE LJTTLEI<'IELD LOWELL KIN KEAD JESSIE LINDSEY KATHERINE SABIN ORGANIZATION EDI TORS BILL MAY NELL DAVIDSON MILDRED McLANE BILL MAY CIRCULATION MANAGERS PAULINE RICHIE ALMA BROWN JESSIE LINDSEY B USIN ESS MANAGERS MARGARET REMINE LOUISE CARR MILDRED ELLISON SARAH HICKEY THOMAS MORGAN CHARLOTTE COX EXCHANGE EDITORS W.
    [Show full text]
  • Keson Product Catalog
    Our grandfather and Keson’s founder, Roy Nosek, often said: “If a job is worth doing, it’s worth doing right.” We know he didn’t say it fi rst, but he said it fi rst to our fathers who said it fi rst to us. He showed us what it means through the way he lived his life and the way he treated people. Be Positive. Work Hard. Respect Others. Have Fun. Act Ethically. Do Good. Make your mark. We believe in these principles. We strive to practice them in all that we do. Keson products are for people who are passionate about their work and getting it done right. We think this might be just about everyone. Aaron Nosek Jude Nosek Dave Nosek President Marketing Human Resources PHONE 800.345.3766 • FAX 800.345.8849 • WWW.KESON.COM • [email protected] TABLE OF CONTENTS “This product is used by 2 NEW PRODUCTS FOR 2017 many cavers as the number one measuring tool for 4 MEASURING underground survey of caves. 5 MEASURING WHEELS We have taken these tapes well over 500 ft underground 6 SUMMARY 8 METAL and have dragged them 11 PLASTIC through some of the worst 15 PAINT mud, grit and grime you can imagine. We have gone to the 16 LONG TAPE MEASURES point of completely covering 16 OPEN CASE STEEL BLADE the tape with mud—so much 20 CLOSED CASE STEEL BLADE mud you cannot even see the 21 OPEN CASE FIBERGLASS BLADE 25 CLOSED CASE FIBERGLASS BLADE numbers. We just washed the tape in water and it’s like 26 SHORT TAPE MEASURES new again.
    [Show full text]
  • Edding Permanent Markers Chalk Line Reels Bleispitz Permanent Markers
    Edding permanent markers Chalk line reels Bleispitz permanent markers Chalk line marking powder Suremark paint markers Stylmark paint markers Soapstone chalk for welders Blackboard chalker Lyra chalk markers Lyra permanent markers Punch numbers and punch letters Paint stencils Permanent marker with fine round nib 1mm Edding 400 For almost all materials, fine lined marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Number Description 000153ZW Edding 400 Black Bleispitz Permanent marker fine round nib 1,0 mm. For almost all materials, fine lined marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Packe per 10 pieces. Number Description 000BL0754 Bleispitz 1,0 mm Red 000BL0778 Bleispitz 1,0 mm Blue 000BL0679 Bleispitz 1,0 mm Black 000BL0792 Bleispitz 1,0 mm Green Permanent marker with round nib 1.5-3mm Edding 300 series For almost all materials, line marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Number Description 000150 Edding 300 Blue 000151 Edding 300 Red 000152 Edding 300 Black 000153 Edding 300 Green Bleispitz Permanent nib 1,5-3 mm For almost all materials, line marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Packe per 10 pieces. Number Description 000BL0594 Bleispitz 1,5-3 mm Red 000BL0617 Bleispitz 1,5-3 mm Blue 000BL0631 Bleispitz 1,5-3 mm Black 000BL0655 Bleispitz 1,5-3 mm Green Permanent marker with round nib 2-4mm Edding 750 series For almost all materials, line marking and labelling. Odorless, fast drying, waterproof, wear-resistant. Number Description 000149 Edding 750 White 000149B Edding 750 Blue 000149BL Edding 750 Black 000149RE Edding 750 Red 000149YE Edding 750 Yellow Pag.
    [Show full text]
  • Level 3 Construction T Level: On-Site Construction (8710-30)
    T level Technical Qualification in Construction: On-Site Construction (Level 3) (delivered by City and Guilds) (8710-30) May 2020 Version 2.0 Draft Qualification Content Pack Copyright in this TQ Specification belongs to, and is used under licence from, the Institute for Apprenticeships and Technical Education 21.02.2020 T Level is a registered trade mark of the Institute for Apprenticeships and Technical Education. Qualification at a glance T Level route Construction T Level pathway On-site Construction City & Guilds number 8710-30 Age group approved 16+ Entry requirements Formal entry requirements are not set by City & Guilds. However, we would expect that Learners have the appropriate attainment at Level 2 before commencing their studies. Assessment Core - knowledge tests are externally assessed Core – employer-set project is externally assessed Occupational specialisms are externally moderated First registration September 2021 Total GLH TBC Total TQT TBC Title and level City & Guilds number T Level technical Qualification: On-Site Construction (Level 3) 8710-30 (delivered by City and Guilds) 2 Contents Qualification at a glance 2 Contents 3 1 Introduction 5 What is this qualification about? 5 Glossary of terms 9 Technical Qualification Structure 10 2 Centre requirements 12 Approval 12 Resource requirements 15 Physical resources 15 Internal quality assurance 16 Learner entry requirements 16 3 Delivering T Level Technical Qualifications 17 Initial assessment and induction 17 Programme delivery 17 4. Competency frameworks 18 Core skills
    [Show full text]
  • 1 Facebook Vondriska Works Instagram @Vondriskaworks
    Logs to Lumber George Vondriska Why cut lumber from your own logs? • Get species you can’t commercially buy. • Control the dimensions of your stock. (Great for turners.) • Heirloom wood I find that, working by myself, I can cut logs up to 12” diameter and 36” long. Cut the logs while they’re wet, as soon as possible after the tree is cut down. If there’s a delay between cutting the log and machining it into lumber, paint the ends of the log to slow down drying. If the bark stays on the log, leave it on. This will also slow down drying. We want the log as wet as possible when it’s being cut. Build a sled A log can roll, dangerously, during the cut, unless you stabilize it. This simple sled acts as an outrigger to keep the log stable. 3/4" plywood works well. Make the base and the vertical 6” wide. Make it as long as the log you’re going to cut. Drill a few holes for lag screws. 1 www.vondriskawoodworks.com Facebook Vondriska Works Instagram @vondriskaworks What you need • A metal detector isn’t imperative, but if you’re not certain of the source of your log, it’s good insurance. Ruin a couple bandsaw blades, and the metal detector will look inexpensive. • A moisture meter will help you determine the moisture content of your material, and when it’s dry enough to use. • A snap line (chalk line) is the easiest way to get the first line on your log.
    [Show full text]
  • DOCUMENT RESUME CE 043 340 TITLE the Use of Hand Tools In
    DOCUMENT RESUME ED 265 368 CE 043 340 TITLE The Use of Hand Tools in Agricultural Mechanics. INSTITUTION Montana State Univ., Bozeman. Dept. of Agricultural and Industrial Education. SPONS AGENCY Montana State Office of Public Instruction, Helena. Dept. of Vocational Education Services. PUB DATE Jul 85 NOTE 131p. PUB TYPE Guides - Classroom Use - Guides (For Teachers) (052) EDRS PRICE MF01/PC06 Plus Fostage. DESCRIPTORS *Agricultural Education; *Agricultural Engineering; Behavioral Objectives; *Classroom Techniques; Course Content; Course Organization; Equipment; *Hand Tools; Learning Activities; Lesson Plans; Safety; Secondary Education; *Teaching Methods; Transparencies; Units of Study; Vocational Education IDENTIFIERS Montana ABSTRACT This document contains a unit for teaching the use of hand tools in agricultural mechanics in Montana. It consists of an outline of the unit and seven lesson plans. The unit outline contains the following components: situation, aims and goals, list of lessons, student activities, teacher activities, special equipment needed, and references. The seven lessons cover these topics: hand tools; hacksaws, files, add whetstones; power grinding; sharpening plane irons and wood chisels, knives, axes and hatchets, metal chisels, punches, twist drills, auger bits, and tin snips and scissors; distinguishing between crosscut saws and rip saws; taking care of hand tools; and using a chain saw safely. Each lesson containssome or all of the following parts: estimated time, why the lesson is needed, objectives, interest approach, presentation, tryout experience, follow-up, equipment needed, references, information sheets, and transparency masters or handouts. (KC) *********************************************************************** * Reproductions supplied by EDRS are the best that can be made * * from the o,'.ginal document. * *********************************************************************** USE OF HAND TOOLS IN AGRICULTURAL MECHANICS U.S.
    [Show full text]