Accelerator Physics I / PHY-MV-BE-E09 Table of Contents

Total Page:16

File Type:pdf, Size:1020Kb

Accelerator Physics I / PHY-MV-BE-E09 Table of Contents Accelerator Physics I / PHY-MV-BE-E09 Table of Contents: 1. Introduction __________________________________________________________________ 4 1.1. Literature ________________________________________________________________________ 4 1.2. Bending radius and beam rigidity _____________________________________________________ 6 2. Magnets _____________________________________________________________________ 9 2.1. General remarks on the calculation of magnetic fields ____________________________________ 9 2.2. Particle beam guidance ____________________________________________________________ 10 2.3. Particle beam focusing ____________________________________________________________ 12 2.4. Correction of chromatic errors ______________________________________________________ 17 2.5. Multipole expansion ______________________________________________________________ 19 2.6. Superconducting Magnets __________________________________________________________ 25 2.7. Effective field length ______________________________________________________________ 29 3. Linear Beam Optics ___________________________________________________________ 31 Transverse Linear Beam Dynamics W. Hillert page 1 Accelerator Physics I / PHY-MV-BE-E09 3.1. A quick and simple first approach using geometric optics ________________________________ 31 3.2. Some considerations concerning the equations of motion ________________________________ 36 3.3. Equations of motion in a moving reference system _____________________________________ 38 3.4. Matrix formalism _________________________________________________________________ 44 3.4.1. Drift space ____________________________________________________________________________45 3.4.2. Dipole magnets ________________________________________________________________________45 3.4.3. Quadrupole magnets ___________________________________________________________________48 3.4.4. Particle orbits in a system of magnets ______________________________________________________50 3.5. Particle beams and phase space _____________________________________________________ 52 3.3.1. Beam emittance _______________________________________________________________________52 3.5.2. Twiss parameters ______________________________________________________________________54 3.5.3. Beta functions _________________________________________________________________________57 3.5.4. Transformation in phase space ___________________________________________________________61 4. Circular Accelerators __________________________________________________________ 69 4.1. Weak focusing ___________________________________________________________________ 69 4.2. Strong focusing __________________________________________________________________ 72 4.2.1. Stability criterion ______________________________________________________________________74 4.3. Periodic focusing systems __________________________________________________________ 77 4.3.1. General FODO lattice ___________________________________________________________________77 4.3.2. Periodic beta functions _________________________________________________________________81 4.4. Transverse beam dynamics _________________________________________________________ 84 4.4.1. Closed orbit __________________________________________________________________________84 4.4.2. Betatron tune _________________________________________________________________________85 4.4.2. Filamentation _________________________________________________________________________86 Transverse Linear Beam Dynamics W. Hillert page 2 Accelerator Physics I / PHY-MV-BE-E09 4.4.3. Normalized coordinates _________________________________________________________________88 4.4.4. Closed orbit distortions _________________________________________________________________89 4.4.5. Gradient errors ________________________________________________________________________97 4.4.6. Optical resonances ___________________________________________________________________ 103 4.5. Beam dynamics with acceleration __________________________________________________ 107 5. Dynamics with Off Momentum Particles _________________________________________ 108 5.1 Dispersion and dispersion functions _________________________________________________ 108 5.2 Dispersion in circular accelerators ___________________________________________________ 111 5.3. Chromaticity ____________________________________________________________________ 114 5.4 Path length and momentum compaction _____________________________________________ 119 Transverse Linear Beam Dynamics W. Hillert page 3 Accelerator Physics I / PHY-MV-BE-E09 1. Introduction 1.1. Literature S.Y. Lee: Accelerator Physics, 3rd edition, World Scientific, New Yersey 2012, ISBN 978-981-4374-94-1 Bryant / Johnson: The Principles of Circular Accelerators and Storage Rings, Cambridge University Press, Cambridge 2005, ISBN 978-0-521-61969-1 Edwards / Syphers: An Introduction to the Physics of High Energy Accelerators, John Wiley & Sons, New York 1992, ISBN 978-0-471-55163-8 K. Wille: The physics of particle accelerators, Oxford Univ. Press 2005, Oxford, ISBN 0-19-850550-7 H- Wiedemann: Particle Accelerator Physics, 4th edition, Springer 2015, Berlin, ISBN 978-3-319-18316-9 Chao / Tigner: Handbook of Accelerator Physics and Engineering, 2nd edition, World Scientific, Singapore 2013, ISBN 987-4417-17-4 Transverse Linear Beam Dynamics W. Hillert page 4 Accelerator Physics I / PHY-MV-BE-E09 F. Hinterberger: Physik der Teilchenbeschleuniger und Ionenoptik, 2. Ausgabe, Springer 2008, Berlin, ISBN 978-3-540-75281-3 K. Wille: Physik der Teilchenbeschleuniger und Synchrotronstrahlungsquellen, 2. überarb. und erw. Ausgabe, Teubner 1996, Stuttgart, ISBN 978-3-519-13087-1 Rossbach / Schmüser: Basic Course on Accelerator Optics, CAS 5th general accelerator physics course CERN 94-01 Transverse Linear Beam Dynamics W. Hillert page 5 Accelerator Physics I / PHY-MV-BE-E09 1.2. Bending radius and beam rigidity Particle guidance and focusing based on beam deflection by Lorentz force F qEvB Ultra-relativistic particles move with speed very close to speed of light! Impact of magnetic fields is enhanced by enormous factor: vc B 1Tesla E 3 108 V /m Only magnetic fields are used for beam deflection! Bending radius from balance of forces mm r 0 : v2 Bv: m qvB pmvqB Leads to the definition of the magnetic rigidity B! In circular accelerators, the magnetic rigidity defines the momentum of the beam: p GeV Bp 1Tm 0.3 q c Transverse Linear Beam Dynamics W. Hillert page 6 Accelerator Physics I / PHY-MV-BE-E09 Example LHC: bending radius: = 2.8 km magnetic field: B = 8.3 Tesla Magnetic rigidity: B = 23.2⸱103 Tm → momentum: p[GeV/c] = 0.3⸱ B → kin. energy: E ≈ pc = 7 TeV Transverse Linear Beam Dynamics W. Hillert page 7 Accelerator Physics I / PHY-MV-BE-E09 Magnets Beam Guidance Beam Focusing Correction of Chromatic Errors Multipole expansion Transverse Linear Beam Dynamics W. Hillert page 8 Accelerator Physics I / PHY-MV-BE-E09 2. Magnets 2.1. General remarks on the calculation of magnetic fields Maxwell’s Equations: Hj (coils) H 0 (gap) → H !!! 0 nc Magnets: = const. defines the pole’s contour! Magn. Induction from BH 0 r Taylor Expansion of the Magnetic Field: BB2 B (x,)y By(0, )x yy (0, y )x2 (, 0 y ) y y xx2 Dipoles Quadrupoles Sextupoles Transverse Linear Beam Dynamics W. Hillert page 9 Accelerator Physics I / PHY-MV-BE-E09 2.2. Particle beam guidance Deflection of particles → homogenous field: BBe0 ˆy const. Corresponding magnetic potential: (,x y ) B0 y defining the pole’s profile to be flat and parallel: Dipole Magnets! parallel poles nI Hds H ds H , HH H H 0 E rE00 E gap yoke nI 1 qqnI B , Curvature: B 0 , m1 00h pph0 Transverse Linear Beam Dynamics W. Hillert page 10 Accelerator Physics I / PHY-MV-BE-E09 Dipole Magnets: Iron dominated: Superconducting: field determined by field determined by geometry of poles geometry of coils → 2 flat poles → j() ~ cos Transverse Linear Beam Dynamics W. Hillert page 11 Accelerator Physics I / PHY-MV-BE-E09 2.3. Particle beam focusing Restoring force, linearly increasing with increasing distance from the axis: B B B g x, B g y with g y x const . yx xy Corresponding potential: (,xy ) g x y, solves B 0 defining the pole’s profile to four hyperbolic poles: Quadrupole Magnets! y iron yoke coils hyperbolic poles a2 yx()0 at a distance ag2 from the axis. gx 2 x 0 Transverse Linear Beam Dynamics W. Hillert page 12 Accelerator Physics I / PHY-MV-BE-E09 The “restoring” force acting on the particles is F qBqvv g xeˆˆx yey A quadrupole magnet is therefore focusing only in one plane and defocusing in the other; depending on the sign of g. The g-parameter may be related to the current of the coils by evaluating the closed 12 01 loop integral n I H ds H ds H ds H ds H ds, 000E 01 20 y g One obtains with Hds rdr : 0 coil 2 nI g 0 , normalized: a2 Quadrupole Strength qqnI2 0 2 kg 2 , k m ppa Transverse Linear Beam Dynamics W. Hillert page 13 Accelerator Physics I / PHY-MV-BE-E09 The focal length of a thin quadrupole magnet of length L can be derived from the de- flection angle of the particles beam and its relation to the quadrupole strength k, x tan f Lqq tan LB gxLxkL Rppy 1 → Gives a better understanding of the quadrupole strength: kL f Here we have assumed the length L to be short compared to the focal length f such that R does not change significantly within the quadrupole magnetic field. Transverse Linear Beam Dynamics W. Hillert page 14 Accelerator
Recommended publications
  • Accelerator and Beam Physics Research Goals and Opportunities
    Accelerator and Beam Physics Research Goals and Opportunities Working group: S. Nagaitsev (Fermilab/U.Chicago) Chair, Z. Huang (SLAC/Stanford), J. Power (ANL), J.-L. Vay (LBNL), P. Piot (NIU/ANL), L. Spentzouris (IIT), and J. Rosenzweig (UCLA) Workshops conveners: Y. Cai (SLAC), S. Cousineau (ORNL/UT), M. Conde (ANL), M. Hogan (SLAC), A. Valishev (Fermilab), M. Minty (BNL), T. Zolkin (Fermilab), X. Huang (ANL), V. Shiltsev (Fermilab), J. Seeman (SLAC), J. Byrd (ANL), and Y. Hao (MSU/FRIB) Advisors: B. Dunham (SLAC), B. Carlsten (LANL), A. Seryi (JLab), and R. Patterson (Cornell) January 2021 Abbreviations and Acronyms 2D two-dimensional 3D three-dimensional 4D four-dimensional 6D six-dimensional AAC Advanced Accelerator Concepts ABP Accelerator and Beam Physics DOE Department of Energy FEL Free-Electron Laser GARD General Accelerator R&D GC Grand Challenge H- a negatively charged Hydrogen ion HEP High-Energy Physics HEPAP High-Energy Physics Advisory Panel HFM High-Field Magnets KV Kapchinsky-Vladimirsky (distribution) ML/AI Machine Learning/Artificial Intelligence NCRF Normal-Conducting Radio-Frequency NNSA National Nuclear Security Administration NSF National Science Foundation OHEP Office of High Energy Physics QED Quantum Electrodynamics rf radio-frequency RMS Root Mean Square SCRF Super-Conducting Radio-Frequency USPAS US Particle Accelerator School WG Working Group 1 Accelerator and Beam Physics 1. EXECUTIVE SUMMARY Accelerators are a key capability for enabling discoveries in many fields such as Elementary Particle Physics, Nuclear Physics, and Materials Sciences. While recognizing the past dramatic successes of accelerator-based particle physics research, the April 2015 report of the Accelerator Research and Development Subpanel of HEPAP [1] recommended the development of a long-term vision and a roadmap for accelerator science and technology to enable future DOE HEP capabilities.
    [Show full text]
  • Accelerator Physics and Modeling
    BNL-52379 CAP-94-93R ACCELERATOR PHYSICS AND MODELING ZOHREH PARSA, EDITOR PROCEEDINGS OF THE SYMPOSIUM ON ACCELERATOR PHYSICS AND MODELING Brookhaven National Laboratory UPTON, NEW YORK 11973 ASSOCIATED UNIVERSITIES, INC. UNDER CONTRACT NO. DE-AC02-76CH00016 WITH THE UNITED STATES DEPARTMENT OF ENERGY DISCLAIMER This report was prepared as an account of work sponsored by an agency of the Unite1 States Government Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, doea not necessarily constitute or imply its endorsement, recomm.ndation, or favoring by the UnitedStates Government or any agency, contractor or subcontractor thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency, contractor or subcontractor thereof- Printed in the United States of America Available from National Technical Information Service U.S. Department of Commerce 5285 Port Royal Road Springfieid, VA 22161 NTIS price codes: Am&mffi TABLE OF CONTENTS Topic, Author Page no. Forward, Z . Parsa, Brookhaven National Lab. i Physics of High Brightness Beams , 1 M. Reiser, University of Maryland . Radio Frequency Beam Conditioner For Fast-Wave 45 Free-Electron Generators of Coherent Radiation Li-Hua NSLS Dept., Brookhaven National Lab, and A.
    [Show full text]
  • Measurement of Sextupole Orbit Offsets in the Aps Storage Ring ∗
    Proceedings of the 1999 Particle Accelerator Conference, New York, 1999 MEASUREMENT OF SEXTUPOLE ORBIT OFFSETS IN THE APS STORAGE RING ∗ M. Borland, E.A. Crosbie, and N.S. Sereno ANL, Argonne, IL Abstract However, we encountered persistent disagreements be- tween our model of the ring and measurements of the beta Horizontal orbit errors at the sextupoles in the Advanced functions. Hence, a program to measure the beam posi- Photon Source (APS) storage ring can cause changes in tion in sextupoles directly was undertaken. Note that while tune and modulation of the beta functions around the ring. we sometimes speak of measuring sextupole “offsets” or To determine the significance of these effects requires “positions” and of “sextupole miscentering,” we are in fact knowing the orbit relative to the magnetic center of the sex- measuring the position of the beam relative to the sextupole tupoles. The method considered here to determine the hor- center for a particular lattice configuration and steering. izontal beam position in a given sextupole is to measure the tune shift caused by a change in the sextupole strength. The tune shift and a beta function for the same plane uniquely 2 PRINCIPLE OF THE MEASUREMENT determine the horizontal beam position in the sextupole. The measurement relies on the quadrupole field component The beta function at the sextupole was determined by prop- generated by a displaced sextupole magnet. It also makes agating the beta functions measured at nearby quadrupoles use of the existence of individual power supplies for the to the sextupole location. This method was used to measure 280 sextupoles and 400 quadrupoles in the APS.
    [Show full text]
  • Dipole Magnets for the Technological Electron Accelerators
    9th International Particle Accelerator Conference IPAC2018, Vancouver, BC, Canada JACoW Publishing ISBN: 978-3-95450-184-7 doi:10.18429/JACoW-IPAC2018-THPAL043 DIPOLE MAGNETS FOR THE TECHNOLOGICAL ELECTRON ACCELERATORS V. A. Bovda, A. M. Bovda, I. S. Guk, A. N. Dovbnya, A. Yu. Zelinsky, S. G. Kononenko, V. N. Lyashchenko, A. O. Mytsykov, L. V. Onishchenko, National Scientific Centre Kharkiv Institute of Physics and Technology, 61108, Kharkiv, Ukraine Abstract magnets under irradiation was about 38 °С. Whereas magnetic flux of Nd-Fe-B magnets decreased in 0.92 and For a 10-MeV technological accelerator, a dipole mag- 0.717 times for 16 Grad and 160 Grad accordingly, mag- net with a permanent magnetic field was created using the netic performance of Sm-Co magnets remained un- SmCo alloy. The maximum magnetic field in the magnet changed under the same radiation doses. Radiation activ- was 0.3 T. The magnet is designed to measure the energy ity of both Nd-Fe-B and Sm-Co magnets after irradiation of the beam and to adjust the accelerator for a given ener- was not increased keeping critical levels. It makes the Nd- gy. Fe-B and Sm-Co permanent magnets more appropriate for For a linear accelerator with an energy of 23 MeV, a di- accelerator’s applications. The additional advantage of pole magnet based on the Nd-Fe-B alloy was developed Sm-Co magnets is low temperature coefficient of rem- and fabricated. It was designed to rotate the electron beam anence 0.035 (%/°C). at 90 degrees. The magnetic field in the dipole magnet To assess the parameters of dipole magnet, the simula- along the path of the beam was 0.5 T.
    [Show full text]
  • Nicholas Christofilos and the Astron Project in America's Fusion Program
    Elisheva Coleman May 4, 2004 Spring Junior Paper Advisor: Professor Mahoney Greek Fire: Nicholas Christofilos and the Astron Project in America’s Fusion Program This paper represents my own work in accordance with University regulations The author thanks the Program in Plasma Science and Technology and the Princeton Plasma Physics Laboratory for their support. Introduction The second largest building on the Lawrence Livermore National Laboratory’s campus today stands essentially abandoned, used as a warehouse for odds and ends. Concrete, starkly rectangular and nondescript, Building 431 was home for over a decade to the Astron machine, the testing device for a controlled fusion reactor scheme devised by a virtually unknown engineer-turned-physicist named Nicholas C. Christofilos. Building 431 was originally constructed in the late 1940s before the Lawrence laboratory even existed, for the Materials Testing Accelerator (MTA), the first experiment performed at the Livermore site.1 By the time the MTA was retired in 1955, the Livermore lab had grown up around it, a huge, nationally funded institution devoted to four projects: magnetic fusion, diagnostic weapon experiments, the design of thermonuclear weapons, and a basic physics program.2 When the MTA shut down, its building was turned over to the lab’s controlled fusion department. A number of fusion experiments were conducted within its walls, but from the early sixties onward Astron predominated, and in 1968 a major extension was added to the building to accommodate a revamped and enlarged Astron accelerator. As did much material within the national lab infrastructure, the building continued to be recycled. After Astron’s termination in 1973 the extension housed the Experimental Test Accelerator (ETA), a prototype for a huge linear induction accelerator, the type of accelerator first developed for Astron.
    [Show full text]
  • Optimal Design of the Magnet Profile for a Compact Quadrupole on Storage Ring at the Canadian Synchrotron Facility
    OPTIMAL DESIGN OF THE MAGNET PROFILE FOR A COMPACT QUADRUPOLE ON STORAGE RING AT THE CANADIAN SYNCHROTRON FACILITY A Thesis Submitted to the College of Graduate and Postdoctoral Studies in Partial Fulfillment of the Requirements for the Degree of Master of Science in the Department of Mechanical Engineering, University of Saskatchewan, Saskatoon By MD Armin Islam ©MD Armin Islam, December 2019. All rights reserved. Permission to Use In presenting this thesis in partial fulfillment of the requirements for a Postgraduate degree from the University of Saskatchewan, I agree that the Libraries of this University may make it freely available for inspection. I further agree that permission for copying of this thesis in any manner, in whole or in part, for scholarly purposes may be granted by the professors who supervised my thesis work or, in their absence, by the Head of the Department or the Dean of the College in which my thesis work was done. It is understood that any copying or publication or use of this thesis or parts thereof for financial gain shall not be allowed without my written permission. It is also understood that due recognition shall be given to me and to the University of Saskatchewan in any scholarly use which may be made of any material in my thesis. Requests for permission to copy or to make other use of the material in this thesis in whole or part should be addressed to: Dean College of Graduate and Postdoctoral Studies University of Saskatchewan 116 Thorvaldson Building, 110 Science Place Saskatoon, Saskatchewan, S7N 5C9, Canada Or Head of the Department of Mechanical Engineering College of Engineering University of Saskatchewan 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada i Abstract This thesis concerns design of a quadrupole magnet for the next generation Canadian Light Source storage ring.
    [Show full text]
  • Cyclotrons: Old but Still New
    Cyclotrons: Old but Still New The history of accelerators is a history of inventions William A. Barletta Director, US Particle Accelerator School Dept. of Physics, MIT Economics Faculty, University of Ljubljana US Particle Accelerator School ~ 650 cyclotrons operating round the world Radioisotope production >$600M annually Proton beam radiation therapy ~30 machines Nuclear physics research Nuclear structure, unstable isotopes,etc High-energy physics research? DAEδALUS Cyclotrons are big business US Particle Accelerator School Cyclotrons start with the ion linac (Wiederoe) Vrf Vrf Phase shift between tubes is 180o As the ions increase their velocity, drift tubes must get longer 1 v 1 "c 1 Ldrift = = = "# rf 2 f rf 2 f rf 2 Etot = Ngap•Vrf ==> High energy implies large size US Particle Accelerator School ! To make it smaller, Let’s curl up the Wiederoe linac… Bend the drift tubes Connect equipotentials Eliminate excess Cu Supply magnetic field to bend beam 1 2# mc $ 2# mc " rev = = % = const. frf eZion B eZion B Orbits are isochronous, independent of energy ! US Particle Accelerator School … and we have Lawrence’s* cyclotron The electrodes are excited at a fixed frequency (rf-voltage source) Particles remain in resonance throughout acceleration A new bunch can be accelerated on every rf-voltage peak: ===> “continuous-wave (cw) operation” Lawrence, E.O. and Sloan, D.: Proc. Nat. Ac. Sc., 17, 64 (1931) Lawrence, E.O. & Livingstone M.S.: Phys. Rev 37, 1707 (1931). * The first cyclotron patent (German) was filed in 1929 by Leó Szilard but never published in a journal US Particle Accelerator School Synchronism only requires that τrev = N/frf “Isochronous” particles take the same revolution time for each turn.
    [Show full text]
  • Accelerator Physics Third Edition
    Preface Accelerator science took off in the 20th century. Accelerator scientists invent many in- novative technologies to produce and manipulate high energy and high quality beams that are instrumental to progresses in natural sciences. Many kinds of accelerators serve the need of research in natural and biomedical sciences, and the demand of applications in industry. In the 21st century, accelerators will become even more important in applications that include industrial processing and imaging, biomedical research, nuclear medicine, medical imaging, cancer therapy, energy research, etc. Accelerator research aims to produce beams in high power, high energy, and high brilliance frontiers. These beams addresses the needs of fundamental science research in particle and nuclear physics, condensed matter and biomedical sciences. High power beams may ignite many applications in industrial processing, energy production, and national security. Accelerator Physics studies the interaction between the charged particles and elec- tromagnetic field. Research topics in accelerator science include generation of elec- tromagnetic fields, material science, plasma, ion source, secondary beam production, nonlinear dynamics, collective instabilities, beam cooling, beam instrumentation, de- tection and analysis, beam manipulation, etc. The textbook is intended for graduate students who have completed their graduate core-courses including classical mechanics, electrodynamics, quantum mechanics, and statistical mechanics. I have tried to emphasize the fundamental physics behind each innovative idea with least amount of mathematical complication. The textbook may also be used by advanced undergraduate seniors who have completed courses on classical mechanics and electromagnetism. For beginners in accelerator physics, one begins with Secs. 2.I–2.IV in Chapter 2, and follows by Secs.
    [Show full text]
  • Study of the Extracted Beam Energy As a Function of Operational Parameters of a Medical Cyclotron
    instruments Article Study of the Extracted Beam Energy as a Function of Operational Parameters of a Medical Cyclotron Philipp Häffner 1,*, Carolina Belver Aguilar 1, Saverio Braccini 1 , Paola Scampoli 1,2 and Pierre Alexandre Thonet 3 1 Albert Einstein Center for Fundamental Physics (AEC), Laboratory of High Energy Physics (LHEP), University of Bern, Sidlerstrasse 5, 3012 Bern, Switzerland; [email protected] (C.B.A.); [email protected] (S.B.); [email protected] (P.S.) 2 Department of Physics “Ettore Pancini”, University of Napoli Federico II, Complesso Universitario di Monte S. Angelo, 80126 Napoli, Italy 3 CERN, 1211 Geneva, Switzerland; [email protected] * Correspondence: [email protected]; Tel.: +41-316314060 Received: 5 November 2019; Accepted: 3 December 2019; Published: 5 December 2019 Abstract: The medical cyclotron at the Bern University Hospital (Inselspital) is used for both routine 18F production for Positron Emission Tomography (PET) and multidisciplinary research. It provides proton beams of variable intensity at a nominal fixed energy of 18 MeV. Several scientific activities, such as the measurement of nuclear reaction cross-sections or the production of non-conventional radioisotopes for medical applications, require a precise knowledge of the energy of the beam extracted from the accelerator. For this purpose, a study of the beam energy was performed as a function of cyclotron operational parameters, such as the magnetic field in the dipole magnet or the position of the extraction foil. The beam energy was measured at the end of the 6 m long Beam Transfer Line (BTL) by deflecting the accelerated protons by means of a dipole electromagnet and by assessing the deflection angle with a beam profile detector.
    [Show full text]
  • Lecture Notes For: Accelerator Physics and Technologies for Linear Colliders
    Lecture Notes for: Accelerator Physics and Technologies for Linear Colliders (University of Chicago, Physics 575) ¢¡ ¢¡ February 26 and 28 , 2002 Frank Zimmermann CERN, SL Division 1 Contents 1 Beam-Delivery Overview 3 2 Collimation System 3 2.1 Halo Particles . 3 2.2 Functions of Collimation System . 4 2.3 Collimator Survival . 4 2.4 Muons . 7 2.5 Downstream Sources of Beam Halo . 8 2.6 Collimator Wake Fields . 10 2.7 Collimation Optics . 12 3 Final Focus 14 3.1 Purpose . 14 3.2 Chromatic Correction . 14 3.3 £¥¤ Transformation . 20 3.4 Performance Limitations . 22 3.5 Tolerances . 24 3.6 Final Quadrupole . 26 3.7 Oide Effect . 27 4 Collisions and Luminosity 29 4.1 Luminosity . 29 4.2 Beam-Beam Effects . 29 4.3 Crossing Angle . 31 4.4 Crab Cavity . 33 4.5 IP Orbit Feedback . 35 4.6 Spot Size Tuning . 36 5 Spent Beam 42 2 1 Beam-Delivery Overview The beam delivery system is the part of a linear collider following the main linac. It typically consists of a collimation system, a final focus, and a beam-beam collision point located inside a particle-physics detector. Also the beam exit line required for the disposal of the spent beam is often subsumed under the term ‘beam delivery’. See Fig. 1. In addition, somewhere further upstream, there might be a beam switchyard from which the beams can be sent to several different interaction points, and possibly a bending section (‘big bend’) which provides a crossing angle and changes the direction of the beam line after collimation, so as to prevent the collimation debris from reaching the detector.
    [Show full text]
  • Synchrotron Radiation Complex ISI-800 V
    Synchrotron radiation complex ISI-800 V. Nemoshkalenko, V. Molodkin, A. Shpak, E. Bulyak, I. Karnaukhov, A. Shcherbakov, A. Zelinsky To cite this version: V. Nemoshkalenko, V. Molodkin, A. Shpak, E. Bulyak, I. Karnaukhov, et al.. Synchrotron radiation complex ISI-800. Journal de Physique IV Proceedings, EDP Sciences, 1994, 04 (C9), pp.C9-341-C9- 348. 10.1051/jp4:1994958. jpa-00253521 HAL Id: jpa-00253521 https://hal.archives-ouvertes.fr/jpa-00253521 Submitted on 1 Jan 1994 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. JOURNAL DE PHYSIQUE IV Colloque C9, supplkment au Journal de Physique HI, Volume 4, novembre 1994 Synchrotron radiation complex ISI-800 V. Nemoshkalenko, V. Molodkin, A. Shpak, E. Bulyak*, I. Karnaukhov*, A. Shcherbakov* and A. Zelinsky* Institute of Metal Physics, Academy of Science of Ukraine, 252142 Kiev, Ukraine * Kharkov Institute of Physics and Technology, 310108 Kharkov, Ukraine Basis considerations for the choice of a synchrotron light source dedicated for Ukrainian National Synchrotron Centre is presented. Considering experiments and technological processes to be carried out 800 MeV compact four superperiod electron ring of third generation was chosen. The synchrotron light generated by the electron beam with current up to 200 mA and the radiation emittance of 2.7*10-8 m*rad would be utilized by 24 beam lines.
    [Show full text]
  • Cyclotron K-Value: → K Is the Kinetic Energy Reach for Protons from Bending Strength in Non-Relativistic Approximation
    1 Cyclotrons - Outline • cyclotron concepts history of the cyclotron, basic concepts and scalings, focusing, classification of cyclotron-like accelerators • medical cyclotrons requirements for medical applications, cyclotron vs. synchrotron, present research: moving organs, contour scanning, cost/size optimization; examples • cyclotrons for research high intensity, varying ions, injection/extraction challenge, existing large cyclotrons, new developments • summary development routes, Pro’s and Con’s of cyclotrons M.Seidel, Cyclotrons - 2 The Classical Cyclotron two capacitive electrodes „Dees“, two gaps per turn internal ion source homogenous B field constant revolution time (for low energy, 훾≈1) powerful concept: simplicity, compactness continuous injection/extraction multiple usage of accelerating voltage M.Seidel, Cyclotrons - 3 some History … first cyclotron: 1931, Berkeley Lawrence & Livingston, 1kV gap-voltage 80keV Protons 27inch Zyklotron Ernest Lawrence, Nobel Prize 1939 "for the invention and development of the cyclotron and for results obtained with it, especially with regard to artificial radioactive elements" John Lawrence (center), 1940’ies first medical applications: treating patients with neutrons generated in the 60inch cyclotron M.Seidel, Cyclotrons - 4 classical cyclotron - isochronicity and scalings continuous acceleration revolution time should stay constant, though Ek, R vary magnetic rigidity: orbit radius from isochronicity: deduced scaling of B: thus, to keep the isochronous condition, B must be raised in proportion
    [Show full text]