641013 Academic Research International Journals

Government College of Technology; Coimbatore – 641013

Academic Research

International Journals - 2012

CIVIL ENGINEERING

A.Gandhimathi, T.Meenambal, “Analysis of heavy metal for soil in Coimbatore by using ANN Model” – European Journal of Scientific Research, ISSN 1450-216X, Vol.68, No.4, pp.462-474, 2012.

G.Prabhakaran, T.Meenambal and N.Ramesh, “Physico-Chemical Analysis of Kelavarapalli Dam Water in TamilNadu” – International Journals Pollution Research, 31(2), pp.273-276, 2012.

Jino John, T.M.Maya and T.Meenambal, “Mathematical Modeling for Durability characteristics of Fly Ash concrete” – International Journal of Engineering Science & Technology (IJEST) – ISSN: 0975-5462, Vol.4, No.01, pp.353-361, January 2012.

Gandhimathi, A., Meenambal, T., “Spatial Prediction of Heavy Metal Pollution for Soils in Coimbatore, India based on ANN and Kriging Model”. European Journal of Scientific Research, Vol. 79, No. 2, pp. 198-207, 2012.

B.Haganesh, S.Nithiarasu, Dr.T.Meenambal and N.Balasubramanian, “ Statistical Approach for Crew Balancing in Construction” - International Journal Engineering Science & Technology (ESTIJ), ISSN: 2250-3498, Vol.2, No.4, August 2012.

Haganesh.B, Shiva Prasad.B.M, Dr.T.Meenambal, “Use of Artificial Neural Network for workforce in typical residential buildings” – International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp. 1-10, August 2012. Gandhimathi.A, B.Haganesh, Dr.T.Meenambal, “An Experimental study on fly ash blended cement concrete structures with organic (corrosion) inhibitor” - International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp.1-12, August 2012. Haganesh.B., Senthilkumar.P., and Dr.T.Meenambal “Sustainable Energy Management by Optimizing Daylight with Artificial Neural Network” - International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp.1-11, August 2012.

Haganesh.B., Sundareswar.V., and Dr.T.Meenambal “Sustainable Energy Management by Optimizing Daylight a Statistical Approach” - International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp.1-11, August 2012. Priyadhrashini.S., B.Haganesh and Dr.T.Meenambal., “Overview of Ewaste Management Practices and their Legislations in India” - International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 7, pp.1-6, September - 2012. Mrs.P.Shanthi, Dr.T.Meenambal, and Prof.N.Balasundram, “Physico chemical analysis of ground water near municipal solid waste dumping sites in Coimbatore city” - International Journal Engineering Science & Technology (ESTIJ), ISSN: 2250-3498, Vol.2, No. 5, pp. 889-893, October 2012.

Suganya.S., B.Haganesh, A.Gandhimathi, Dr.T.Meenambal “Mathematical Modelling for Strength Characteristics of Fly ash concrete” - International Journal of Engineering Research & Technology (IJERT), Vol.1, Issue 7, pp.1-5, September 2012. Lakshmi Priya, Thyagarajan, Rontala Navakoti Uma, Subpiramaniyam ivakumar, Thirumoorthy Meenambal, Hyun-Keun Son “Bioremediation of Pulp and Paper Industry Secondary Sludge Spiked with Cow Dung and Effective Microorganisms Using Epigeic Earthworm Eudrilus eugeniae (Kinberg)” Dynamic soil, Dynamic Plant, pages In press; ISBN: 1749-6500, Jan 2012. Nalina.P., Meenambal.T and Sathyanarayan.R., “Long Term Land use Land Cover Dynamics of Nilgiri District in Western Ghats of Tamil Nadu, India” using Satellite Remote Sensing Technique - European Journal of Scientific Research, ISSN 1450-216X, Vol. 85 No 4, pp.626-632 September, 2012. Navaneethakrishnan A and V.M.Shanthi (2012), “Experimental Study of Self Compacting Concrete (SCC) using Silica Fume”, International Journal of Emerging Trends in Engineering and Development, Iss.2, Vol.4, 475-482.

Sunilaa George, R. Thenmozhi and P.N.Magudeswaran, Corrosion Potential of Activated Fly Ash Concrete, Asian Journal of Chemistry, Vol.24, No.1, 2012, 55-41 Sunilaa George, Thenmozhi, R. and Magudeswaran, P. N, Study on corrosion of activated fly ash concrete beams , Asian Journal of Chemistry, Vol. 24, No.11, 2012, 5142-5144 Chithra R, Thenmozhi R and Ravathi M.C, Ductility of Prefabricated Cage Reinforced Concrete Beams: Analytical Study International Journal of Civil and Structural Engineering, Vol.2, No.4, 2012, 1026-1034 Senthil Vadivel T and Thenmozhi R, Experimental Study on Waste Tyre Rubber Replaced Concrete: An Eco-friendly Construction Material, Journal of Applied Sciences Research, 8(6), 2012, 2966-2973 DeepaShri S, Thenmozhi R and Anitha M , Experimental Validation of a Theoretical Model for Flexural Capacity of Hybrid Ferrocement Slab, European Journal of Scientific Research, Vol.73, No.4, 2012 , 512-526 Anitha M , Thenmozhi R, DeepaShri S, Behaviour of Htbrid Ferrocement slabs subjected to Impact, Journal of Emerging Trends in Engineering and Technology, Vol.4, No:2, 2012, 465-474 DeepaShri S, Thenmozhi R, Flexural Behavior Of Hybrid Ferrocement Slabs with microconcrete and fibers, Journal of Emerging Trends in Engineering and Development, Vol.4, No:2, 2012, 165-177 DeepaShri S, Thenmozhi R, An Experimental Investigation On The Flexural Behavior Of SCC Ferrocement Slabs Incorporating Fibers, Journal of Engineering Science and Technology, Vol: 4 Issue: 5, 2012, 2146-2158 M. S. Deepak, R. Kandasamy , R. Thenmozhi, Investigation on Lateral- Torsional Buckling Performance Of Cold-Formed Steel „C‟ Channel Sections , Journal of Emerging Trends in Engineering and Technology, Vol.4, No:2, 2012, 538-551 S.Rohini, R Thenmozhi and S Deepa Shri, Finite Element Modeling of Ferrocement Slabs in Flexure Using ANSYS, Journal of Emerging Trends in Engineering and Technology, Vol.4, No:2, 2012, 500-508 R. Thangaraj and R. Thenmozhi, Mechanical Properties of High Volume Fly Ash as a Binder for Concrete Structures, International Journal of Advances in Science and Technology , Vol.4, No:5, 2012, 94-100 R. Thangaraj and R. Thenmozhi Performance of High Volume Fly Ash in Concrete Structures, IOSR , Journal of mechanical and civil engineering, Volume 3, Issue 1, 2012, 28-33 S.Deepa shri. R.Thenmozhi, M.Anitha, Mechanical properties of SCC with polypropylene Fibers, International Journal of advanced Scientific research and technology, Volume 3, No.2, 2012, 375-388

MECHANICAL ENGINEERING

R.Jothimurugan, K.S.Amirthagadeswaran and Joel Daniel , Performance of silver coated copper tool with kerosene-servotherm Dielectric in Monotherm, Journal of Applied Sciences.12(10) ISSN 1812-5654, 2011,999-1005 P Senthil and K.S.Amirthagadeswaran , Experimental investigation on the effect of applied pressure on microstructure and mechanical properties of squeeze cast AC2A aluminium alloy, Australian Journal of Mechanical Engineering , Vol. 10 , Issue 1, 2012, 2244-2250 P Senthil and K.S.Amirthagadeswaran , Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method, Journal of Mechanical Science and Technology, , Vol 26, Issue 4, 2012, 1141-1147. Shanmugaraja, M., Nataraj, M. and Gunasekaran, N , Literature snapshot on six sigma project selection for future research, Int. J. of Services and Operations Mgmt, Vol. 11 No. 3 , (2012), 335 – 357. Shanmugaraja, M., Nataraj, M. And Gunasekaran, N.,Six Sigma project selection via quality function deployment, Int. J. of Productivity and Quality Mgmt, Vol.10, No. 1, 2012, 85 – 111 Sankar, S., Nataraj, M., and Prabhu Raja, V, Failure analysis of bearing in wind turbine generator gearbox‟‟, Journal of information systems and communication, Vol. 3, (February 2012), 302 – 309. Ragoth Singh, R., and Nataraj, M, Study on Performance of Plunger Pump at Various Crank Angle Using CFD Engineering Science and Technology: An International Journal (ESTIJ), Vol. 2, No. 4, August 2012, 549 – 553. Ragoth Singh, R., and Nataraj, M, Analysis and Optimization of Pump Performance Variables using Genetic Algorithm and Taguchi Quality Concept: A Case Study, International Journal of Mechanical Engineering applications Research, International Journal of Mechanical Engineering applications Research, Vol 03, Issue 03, (Aug-Sep 2012), 185 – 189 Ragoth Singh, R., and Nataraj, M, Optimizing impeller geometry for performance enhancement of a centrifugal Blower using the Taguchi quality concept, International Journal of Engineering Science and Technology, Vol 04, No. 10, October 2012, 4308 – 4314 Ragothsingh, R. and Nataraj, M. Parametric study and optimization of pump impeller by varying the design parameter using computational fluid dynamics pp. International Review of Mechanical Engineering, Vol. 6, (2012), 1581 - 1585. Shanmugaraja, M., Nataraj, M. and Gunasekaran, N. Total Performance Excellence – a model to implement Six Sigma in service organizations, Int. J. of Six Sigma and Competitive Advantage, Vol. 7, No. 2/3/4, 2012, 209 – 242. S.Gopi & K.Manonmani, Influence of Shoulder Profile and Shoulder Penetration on Joint Strength; of Friction Stir Welded AA6082 in Conventional Milling Machine, European Journal of Scientific Research, Vol.73; No.1, 2012, pp 20-32 S.Gopi & K.Manonmani, Predicting Tensile Strength of Double Side Friction Stir Welded 6082-T6 Aluminium Alloy, Science and Technology of Welding and Joining, 13.Vol.17; No.7; 2012, pp.601-607. S.Gopi & K.Manonmani, Optimization of Process Parameters on Joint Strength of Friction Stir Welded 6082-T6 Aluminium Alloy, International Journal of Materials Science, Vol.7; No.3; 2012, pp.223-232 S.Gopi & K.Manonmani , Study of Friction Stir Welding Parameters in Conventional Milling Machine for 6082-T6 Aluminium Alloy, Australian Journal of Mechanical Engineering,Vol.10; No.2; 2012 pp. 1-12 Ramesh K, Alwarsamy T and Jayabal S, ANN prediction and RSM optimization of cutting process parameters in boring operations using impact dampers, Journal of Vibro Engineering, Vol.14(3), 2012, pp.1156-1175 Ramesh K and Alwarsamy T , Investigation of modal analysis in the stability of boring tool using double impact dampers -model development, European Journal of Scientific Research(EJSR), Vol. 80(2), 2012, pp.182-190 Periyasamy, S. and Alwarsamy, T.Analysis of block vibrations induced by combustion chamber pressure in a diesel engine, Journal of Vibroengineering.,Vol.14, No.1, 2012, 250-259 Periyasamy, S., Alwarsamy, T. And Rajasekar, V. Analysis on Combustion of a Primary Reference Fuel, International Journal of Engineering Science and Technology., Vol.4, No.5, 2012, 2244-2250 Periyasamy, S. and Alwarsamy, T. Combined Effects of Inertia and Pressure on Engine Vibration, Journal of Vibration Control.,2012 Usha S, Sreekumar M, Elastic Behaviour of DEAP Film in the Development of actuators, Procedia Engineering, 41, 2012, 1154-1161

EIE

Dr.D.Mary, Computation of Total Transfer Capability using Power Producer‟s Bidding in the Deregulated Environment, European Journal of Scientific Research, Vol. No 68, Issue No. 2, 2012, 172-181 Dr.D.Mary, An Improved Merge Sort Algorithm for Bid Based Power, Flow for a Practical System in the Deregulated Environment , Wulfenia Journal, Vol. No 19, Issue No. 10, 2012, 9-31 Dr.D.Mary, Reactive Power Optimization Incorporating TCSC Device through Big Bang-Big Crunch Algorithm for Voltage Stability Limit Improvement, Wulfenia Journal, Vol. No 19, Issue No. 10, 2012, 455-470 Dr.D.Mary, Power Loss Minimization for Power Quality Radial Distribution System, European Journal of Scientific Research, Vol. No 78, Issue No. 3, 2012, 507-521

EEE

Kavithamani A, Manikandan V, Devarajan N, „Fault Detection of Analog Circuit Using Network Parameters‟ Journal of Electronic Testing. Theory and Applications (JETTA), Springer, Vol. 27, 2012,

Vanitha V, Devarajan N, „Transient Stability of Squirrel Cage Induction Generator in a Wind Farm using Static Synchronous Compensator and Super capacitor‟, International Journal of Electrical Engineering, Vol. 5, No.1, 2012, pp 7-22 Sivaraju S.S, Devarajan.N,‟ Design of Induction Motor using Multiple Flux Technique‟ International Journal of Electrical Engineering, Vol. 5, No. 4, 2012, pp 393-409 Sheela Shobana Rani K, Devarajan.N,‟ Optimization Model for Sensor Node Deployment‟ European Journal of Scientific Research, Vol.70, No.4, 2012, pp 491-498 Sivaraju S.S, Devarajan.N,‟ ELMA Based Design of SCMFIM to Improve the Efficiency and Power Factor‟ International Journal of Computer Applications (IJCA),Vol. 43, No. 22, 2012, pp 23-29 Babypriya B, Devarajan N, „Simulation and Analysis of a DFIG Wind Energy Conversion System with Genetic Fuzzy Controller‟ International Journal of Computing and Engineering (IJSCE), Vol. 2, Issue 2, 2012, pp 176-182. Sivaraju S.S, Devarajan.N,‟ Improve the Efficiency and Power Factor of 2.2 kw, Three Phase, Multi-Flux, Squirrel Cage IM through Optimal Design ‟ International Journal of Scientific & Engineering Research, Vol. 3, Issue 5, 2012, pp 1-8.

Rajendran R, Devarajan N,‟ Dynamically Reconfigurable Control Structure for Three Phase Induction Motor Drives‟, International Journal of Power Electronics and Drive Systems (IJPEDS),Vol. 2, No. 1, 2012, pp 43-50. Rajendran R, Devarajan N,‟A Comparative Performance Analysis of Torque Control Schemes for Induction Motor Drives‟, International Journal of Power Electronics and Drive Systems (IJPEDS),Vol. 2, No. 2, June 2012, pp 177-191. Rajendran R, Devarajan N,‟ Simulation and Implementation of a High Performance torque control scheme of IM Utilizing FPGA” International Journal of Electrical and Computer Engineering (IJECE), Vol. 2, No. 3, June 2012, pp 277-284 Vanisri A, Devarajan N,‟Labview Based Indirect Position Control of Four Switch Three Phase Brushless DC Motor Using FPGA‟ International Journal of Electrical Engineering, Vol. 5, No. 6, 2012, pp 699-712. Vanisri.A, Devarajan.N, „Fuzzy Logic Based Sensorless Control of Three Phase Brushless DC Motor Using Virtual Instrumentation‟, ARPN Journal of Science and Technology, Vol.2, No.4, 2012, pp 322-329. Vanisri A, Devarajan N,‟FPGA Based Indirect Position Detection and Speed Control of PMBLDC Motor Using Virtual Instrumentation ‟ International Journal of Advanced Research in Technology, Vol. 2, Issue. 5, 2012, pp 20-27 Parvathy P, Devarajan.N, „Simulation and Experimental Results of DC to DC Converter with Reduced Losses‟, European Journal of Scientific Research, Vol.76, No.1, 2012, pp 20-30. Parvathy P, Devarajan.N, „Simulation and Implementation of Current Fed Full Bridge Boost Converter with Zero Current Switching for High Voltage Applications‟, International Journal of Computer Science Issues, Vol.9, No.3, 2012, pp 531-536. Parvathy P, Devarajan.N, „An Efficient Soft Switched Full Bridge DC to DC Converter with Reduced Inductor Volume and Low Voltage Stress on the Switches‟, European Journal of Scientific Research, Vol.78, No.3, 2012, pp 395-408 Parvathy P, Devarajan.N, „Comparison of Simulation and Experimental Results of ZVS Full Bridge DC - DC Converter and PWM Controlled Quasi-Resonant Converter,‟ International Journal of Emerging Trends in Engineering and Development, Vol.4, Issue.2, 2012, pp 850-864 Sheela Shobana Rani K, Devarajan.N,‟Fuzzy Based Optimization for Power Management in Wireless Sensor Networks‟ International Journal of Computer Applications, Vol.48, No.4, 2012, pp 10-16. Sheela Shobana Rani K, Devarajan.N, „ Multiobjective Sensor Node Deployment in Wireless Sensor Networks‟ The International Journal of Engineering Science, Technology, (IJEST), Vol.4, No.4, 2012, pp 1262-1266 Sheela Shobana Rani K, Devarajan.N,‟ A Fuzzy Based Optimization for Routing in Wireless Sensor Networks‟ Journal of Applied Sciences Research, Vol.8, No.4, 2012, pp 2137-2142 Sheela Shobana Rani K, Devarajan.N,‟ Energy Efficient Approach for Collision Avoidancein Wireless Sensor Networks‟ Journal of Information Engineering and Applications, Vol.2, No.3, 2012, pp 1-6 Anila S, Devarajan N, „ Preprocessing Technique for face Recognition applications under varying Illumination Conditions‟,Global Journal of Computer Science and Technology, Vol.12, Issue 11,Version 1.0, 2012, pp.13-18 Anila S, Devarajan N, „ An Efficient Face Recognition System using Transforms‟, Archives Des Sciences, Vol.65, No.9, Sep.2012, pp. 222-234 Anila S, Devarajan N, „ Superior Feature Sets for Face Recognition under Difficult Lighting Conditions‟, Journal of Applied Sciences Research, Vol.8, No.(7), 2012, pp. 3344-3352 Latha J, Devarajan N, „An Approach to Feature Extraction for Hand Written Character and Recognition using Artificial Neural Network‟, European Journal of Scientific Research, Vol.78, No.1, 2012, pp. 15-25 Latha J, Devarajan N, „In-Process Vision Inspection Systems for Sorting using Image Processing Techniques‟, Journal of Computer Science, Vol.8, No.4, 2012, pp.528-532 Sharmila B, Devarajan N, „ A Survey - Networked Control Systems‟ International Journal of Electrical Engineering, Vol. 5, No. 6, 2012, pp 769-780 Vijayakumari A, Devarajan N, „ Design and Development of a Model-Based Hardware Simulator for Photovoltaic Array‟ International Journal of Electrical Power and Energy Systems, ELSEVIER, Vol. 43, 2012, pp 40-46 Geetha V, Devarajan N, Neelakantan,P.N, „OR- Bridging Fault Analysis and Diagnosis for Exclusive-OR Sum of Products Reed-Muller Canonical Circuits‟, European Journal of Scientific Research, Vol. 71, No. 4 , 2012, pp 482-489 Geetha V, Devarajan N, Neelakantan,P.N, „Analysis of Different Types of Faults in a Class of Boolean Circuits‟, International Journal of Engineering and Innovative Technology(IJEIT) , Vol. 2, Issue. 4 , 2012, pp 145-149. Chitra S, Devarajan N, „ Graph Theory and Power System Engineering – A Study Report‟, Archives Des Sciences, Vol.65, No.12, Dec. 2012, pp. 652-664. Suresh.S, Devarajan.N, Rajesakaran .V „ Modeling and Analysis of Shunt Hybrid Filter to Enhance Power Quality for Mitigation of Load Current Harmonics‟, Advances in Natural and Applied Sciences, Vol.6, Issue No.8, 2012, pp 1276-1282 Suresh.S, Devarajan.N, Vidhya N, Rajesakaran .V „Modeling and Analysis of User- Defined-Constant-Switching Frequency DSTATCOM for three phase three wire distribution system‟, International Journal of Engineering Trends and Technology, Vol.3, Issue No.2, 2012, pp 213-2012 R.Rajeswari, P.AmuthaPrabhakar, Network Anomaly Detection by Cascading K-Means Clustering and C4.5 Decision Tree algorithm, Elsevier Journal, 2012, R.Rajeswari, K.Dhanasekaran, A Research-Oriented Survey and Current Status on Feature Extraction, Ontology Construction towards Natural Language Processing, IJCSI, Vol.9, Issue 3, No.1, May 2012 R.Rajeswari, K.Dhanasekaran, An Approach for Knowledge Extraction Using Ontology Construction and Machine Learning Techniques, IJCL, Vol.3, Issue 1, No.1, August 2012 K.Ranjith Kumar, S.Palaniswami, V.N.Dhivya, Genetic Algorithm Application for Efficiency Optimization of Wound Rotor Induction Motor by Rotor Capacitive Reactance Control, International Review on Modeling and Simulation, Volume 5, issue 1, Feb.‟12, pp.239-244 K.Ranjith Kumar, S.Palaniswami, Lourds Shiny, Performance Enhancement of Wound Rotor Induction Motor by Rotor Capacitive Reactance Control using fuzzy controller, International Journal of Electrical Engineering, Volume 5, issue 2, May‟12, pp.197-207 K.Ranjith Kumar, S.Palaniswami, K. Siva Kumar, Artificial Neural Network Based rotor capacitive reactance control for energy efficient Wound Rotor Induction Motor, Journal of Computer Science, Science publications, USA, Volume 8, issue 7, May‟12, pp.1085- 1091 K.Ranjith Kumar, S.Palaniswami , Performance Analysis of Wound Rotor Induction Motor by DSP based Rotor Dynamic Capacitor Control, International Journal of Theoretical and Applied Information Technology, Volume 40, issue 1, June‟12, pp.67-77

ECE

Dr. V. Sumathy and Radha.B , Enhancing the Data Oriented Grid Scheduling Using Dynamic Error Detection, International Journal of Information and Education Technology, Vol 2, No. 5, 2012, 454-457. P.Deepa and Dr.C.Vasanthanayaki, FPGA based On-Chip Memory Architecture Design for Image Processing Algorithms, Microelectronics, Vol. 43, No. 11 2012, 916-928 P.Deepa and Dr.C.Vasanthanayaki, On-Chip FPGA Memory Sub-System Architecture for Data Dependent Application, European Journal of Scientific Research, Vol. 77, No.1, 2012, 62-76 J. Rejina Parvin C.Vasanthanayaki, “Modified OCABTR based Hierarchical Two Level Data Aggregation in Wireless Sensor Networks, International Journal on Computer Science and Engineering, Vol.4, No.3, 2012, 469-478.

PRODUCTION ENGINEERING

S.Srinivasa moorthy, K.Manonmani, Optimization and Predictive learning of Mechanical Parameters for Particulate (TiO2) filled hybrid reinforced composite, Archives Des Sciences, Vol 65, Issue 12,Dec 2012, 403 - 414 S.Gopi & K.Manonmani, Study of Friction Stir Welding Parameters in Conventional Milling Machine for 6082-T6 Aluminium Alloy, Australian Journal of Mechanical Engineering , Vol 10, Issue 2, 2012, 129-140 S.Gopi & K.Manonmani, Optimization of Process Parameters on Joint Strength of Friction Stir Welded 6082-T6 Aluminium Alloy, International Journal of Materials Science, Vol 7, Issue 3, 2012, 223 - 232 S.Gopi & K.Manonmani, Predicting Tensile Strength of Double Side Friction Stir Welded 6082-T6 Aluminium Alloy, Science and Technology of Welding and Joining, Vol 17, Issue 7, 2012, 601 - 607 S.Gopi & K.Manonmani , Influence of Shoulder Profile and Shoulder Penetration on Joint Strength; of Friction Stir Welded AA6082 in Conventional Milling Machine, European Journal of Scientific Research, Vol.73; No.1; pp 20-32, 2012, 20 – 32