IQDNC34 User Instruction Manual Issue 1 Revision 3
Total Page:16
File Type:pdf, Size:1020Kb
User Instruction Manual IQDNC34 Dual-channel 3G/HD-SDI Down Converter with Analog Outputs www.s-a-m.com IQDNC34 Information and Notices Information and Notices Copyright and Disclaimer Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen display looks etc. Information in this manual and software are subject to change without notice and does not represent a commitment on the part of SAM. The software described in this manual is furnished under a license agreement and can not be reproduced or copied in any manner without prior agreement with SAM or their authorized agents. Reproduction or disassembly of embedded computer programs or algorithms prohibited. No part of this publication can be transmitted or reproduced in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage and retrieval system, without permission being granted, in writing, by the publishers or their authorized agents. SAM operates a policy of continuous improvement and development. SAM reserves the right to make changes and improvements to any of the products described in this document without prior notice. Contact Details For details of our Regional Customer Support Offices, please visit the SAM website and navigate to Support/Contact Support. www.s-a-m.com/support/contact-support/ Customers with a support contract should call their personalized number, which can be found in their contract, and be ready to provide their contract number and details. Issue 1 Rev 4 Page 2 © 2016 SAM IQDNC34 Contents Information and Notices . 2 Copyright and Disclaimer . 2 Contact Details . 2 1 Introduction . 6 1.1 Description . 6 1.2 Block Diagram . 6 1.3 Features . 7 1.4 Order Codes . 8 1.4.1 Hardware Options . 8 1.4.2 Software Options. 8 1.4.3 SFP Options . 9 1.5 Rear Panels. 10 1.6 Enclosures. .11 1.6.1 B-style Enclosure . .11 1.6.2 A-style Enclosures. .11 2 Technical Specification. 12 3 Connections. 16 3.1 IQDNC3400-1A(B)3 . 16 3.1.1 SDI Inputs . 16 3.1.2 SDI Outputs. 16 3.1.3 Composite Outputs . 16 3.1.4 Analog Audio Outputs . 16 3.2 IQDNC3401-2A(B)3 . 17 3.2.1 SDI Inputs . 17 3.2.2 Reference Input. 17 3.2.3 SDI Outputs. 17 3.2.4 Composite Outputs . 17 3.2.5 Analog Audio Outputs . 17 3.3 IQDNC3402-2A(B)3 . 18 3.3.1 SDI Inputs . 18 3.3.2 Reference Input. 18 3.3.3 SDI Outputs. 18 3.3.4 Composite Outputs . 18 3.3.5 Analog Audio Outputs . 18 3.3.6 SFP . 18 4 Card Edge LEDs . 19 5 Operation Using the RollCall Control Panel . 20 5.1 Information Window. 20 5.1.1 Video Input Status . 20 5.1.2 Video Output Status . 20 5.1.3 Audio Status . 21 5.1.4 Reference Status. 21 5.2 Input . 22 5.2.1 Input Source Ch 1 and Ch 2 . 22 5.3 Output-Ch1 and Ch2 . 23 5.3.1 Output Standard . 23 5.3.2 Default Output . 24 5.3.3 Freeze . 24 5.3.4 Legalization . 24 5.3.5 SFP Output Routing . 25 5.3.6 Test Patterns . 25 5.3.7 CVBS Encoder A/B . 25 Issue 1 Rev 4 Page 3 © 2016 SAM IQDNC34 5.3.8 Blanking . 26 5.3.9 Luma Clipper. 26 5.3.10 Logo Control (Option) . 27 5.4 Video-Ch1 and Ch2. 29 5.4.1 Proc Amp . 29 5.4.2 Nonlinear Enhancer . 30 5.4.3 Conversion Aperture . 31 5.4.4 Noise Reduction (Option) . 32 5.5 Convert-Ch1 and Ch2 . 33 5.5.1 Motion Processing. 33 5.5.2 Enhanced Film Mode . 34 5.5.3 Input Cadence. 34 5.5.4 Output Cadence . 35 5.6 ARC & Sidebar Keyer-Ch1 and Ch2 . ..