DOCSLIB.ORG

User Instruction Manual Format Conversion – SDI

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
User Instruction Manual Format Conversion – SDI User Instruction Manual Format Conversion – SDI IQUDC10 3G/HD/SD-SDI Up, Down and Cross Converter with Synchronizer IQDNC00 3G/HD/SD-SDI Downconverter with Synchronizer IQDCC00 3G/HD/SD-SDI Down and Cross Converter with Synchronizer IQUPC00 HD/SD-SDI Up Converter with Synchronizer IQUCC00 3G HD/SD-SDI Up and Cross Converter with Synchronizer www.s-a-m.com IQUDC10/IQDNC00/IQDCC00/IQUPC00/IQUCC00 Information and Notices Information and Notices Copyright and Disclaimer Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen display looks etc. Information in this manual and software are subject to change without notice and does not represent a commitment on the part of SAM. The software described in this manual is furnished under a license agreement and can not be reproduced or copied in any manner without prior agreement with SAM or their authorized agents. Reproduction or disassembly of embedded computer programs or algorithms prohibited. No part of this publication can be transmitted or reproduced in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage and retrieval system, without permission being granted, in writing, by the publishers or their authorized agents. SAM operates a policy of continuous improvement and development. SAM reserves the right to make changes and improvements to any of the products described in this document without prior notice. Contact Details Customer Support For details of our Regional Customer Support Offices please visit the SAM website and navigate to Support/24/7-Support. www.s-a-m.com/support/247-support/ Customers with a support contract should call their personalized number, which can be found in their contract, and be ready to provide their contract number and details. Issue 1 Rev 3 Page 2 © 2016 SAM IQUDC10/IQDNC00/IQDCC00/IQUPC00/IQUCC00 Safety Information Safety Information Issue 1 Rev 3 Page 3 © 2016 SAM IQUDC10/IQDNC00/IQDCC00/IQUPC00/IQUCC00 Safety Information Issue 1 Rev 3 Page 4 © 2016 SAM IQUDC10/IQDNC00/IQDCC00/IQUPC00/IQUCC00 Safety Information Mains Power Supplies This equipment has two 3-pin IEC power sockets, one for the main power supply unit and one for the redundant power supply unit. The power supply is auto switching for input voltages in the ranges of 100 V to 240 V nominal. No voltage adjustment procedure is required. • This equipment has more than one power supply. To reduce the risk of electric shock, plug each power supply into separate branch circuits employing separate service grounds. • Before performing any servicing or maintenance, disconnect and isolate the unit from the mains input and from any product outputs. • Do not operate this unit without an earth connection. Issue 1 Rev 3 Page 5 © 2016 SAM IQUDC10/IQDNC00/IQDCC00/IQUPC00/IQUCC00 Safety Information Laser Safety EN60825-1 (2001) Safety of Laser Products • Caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Viewing the laser diode with the optical fiber removed and with the aid of optical magnifiers may be hazardous. • This product is a Class 1 laser product (output power <15mW) at 1270 nm to 1610 nm with a beam divergence >30 mrad. Ventilation Although the unit is constructed to meet normal environmental requirements, ensure that there is a free flow of air at the front, rear, and sides of the unit to dissipate the heat produced during operation. Installations should be designed to allow for this. Do not obstruct the ventilation holes on the right-side of the unit. Damage to the equipment may result. Compliance Standards This equipment conforms to the following standards: EN60950-1: 2006 Safety of Information Technology Equipment Including Electrical Business Equipment. UL1419 (3rd Edition) - UL File E193966 Standard for Safety – Professional Video and Audio equipment. EMC Standards This equipment conforms to the following standards: EN 55103-1: 1996 (Environment E4) Electromagnetic Compatibility, Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 1. Emission. EN 55103-2: 1996 (Environment E2) Electromagnetic Compatibility, Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 2. Immunity. FCC/CFR 47:Part 15, Class A Federal Communications Commission Rules Part 15, Subpart B, Class A. EMC Environment The product(s) described in this manual conform to the EMC requirements for, and are intended for use in, the controlled EMC environment (for example, purpose-built broadcasting or recording studios), and the rural outdoor environment (far away from railways, transmitters, overhead power lines, etc.) E4. Issue 1 Rev 3 Page 6 © 2016 SAM IQUDC10/IQDNC00/IQDCC00/IQUPC00/IQUCC00 Safety Information EMC Performance of Cables and Connectors SAM products are designed to meet or exceed the requirements of the appropriate European EMC standards. In order to achieve this performance in real installations it is essential to use cables and connectors with good EMC characteristics. All signal connections (including remote control connections) shall be made with screened cables terminated in connectors having a metal shell. The cable screen shall have a large-area contact with the metal shell. Coaxial Cables Coaxial cables connections (particularly serial digital video connections) shall be made with high-quality double-screened coaxial cables such as Belden 1694 or BBC type PSF1/2M. D-type Connectors D-type connectors shall have metal shells making good RF contact with the cable screen. Connectors having “dimples” which improve the contact between the plug and socket shells are recommended. Issue 1 Rev 3 Page 7 © 2016 SAM IQUDC10/IQDNC00/IQDCC00/IQUPC00/IQUCC00 Contents Contents Information and Notices . 2 Safety Information . 3 1. Introduction. 12 1.1 Description . 12 1.2 Block Diagrams . 12 1.2.1 IQUDC10. 12 1.2.2 IQDNC00. 13 1.2.3 IQDCC00. 13 1.2.4 IQUPC00. 14 1.2.5 IQUCC00. 14 1.3 Order Codes . 15 1.3.1 IQUDC10. 15 1.3.2 IQDNC00. 15 1.3.3 IQDCC00. 15 1.3.4 IQUPC00. 15 1.3.5 IQUCC00. 15 1.3.6 Hardware and Software Options . 15 1.4 Enclosures. 16 1.4.1 B-style Enclosure . 16 1.4.2 A-style Enclosures. 16 2. Technical Specification . 17 2.1 IQUDC10. 17 2.2 IQDNC00. 22 2.3 IQDCC00. 28 2.4 IQUPC00 . 34 2.5 IQUCC00. 39 3. Connections . 44 3.1 Rear Panel View . 44 3.1.1 Input Connections . 44 3.1.2 Output Connections . 44 3.1.3 Control Connections . 44 4. Card Edge LEDs . 45 5. Operation Using the RollCall Control Panel . 46 5.1 Template Screens . 46 5.2 Information Window. 46 5.2.1 Video Status . 47 5.2.2 Audio Input Status . 47 5.2.3 Reference Status. 48 5.2.4 Card Edge LEDs . 48 5.2.5 Dolby Status . 48 5.2.6 Timecode Status . 49 5.2.7 AFD Status . 49 5.3 Config-Summary . 50 5.3.1 Video Input . 50 5.3.2 Video Output . 50 5.3.3 Audio Bulk Delay. 50 5.3.4 Genlock Timing . 51 5.3.5 Audio Outputs . 51 5.4 Video-In . 52 5.4.1 Input . 52 5.4.2 ProcAmp . 53 5.4.3 YC Timing . ..
Load more

Recommended publications
  • Manual HXC3000C01
    HXC3000C01 CROSS CONVERTER FROM 3G/HD/SD-SDI TO 3G/HD/SD-SDI WITH ADVANCED MOTION COMPENSATED DE-INTERLACING Version 1.0 Albalá Ingenieros, S.A. 23 February 2015 - © Albalá Ingenieros S.A. - All rights reserved Medea, 4 - 28037 Madrid - Spain HXC3000C01 HXC3000C01 CROSS CONVERTER FROM 3G/HD/SD-SDI TO 3G/HD/SD-SDI WITH ADVANCED MOTION COMPENSATED DE-INTERLACING Version 1.0 1. DESCRIPTION ...................................................................................................................... 5 1.1. The HXC3000C01 ........................................................................................................................... 5 1.2. Features ............................................................................................................................................. 6 1.3. Block diagram .................................................................................................................................. 7 2. SPECIFICATIONS ................................................................................................................. 9 3. INSTALLATION .................................................................................................................. 11 3.1. Initial inspection .......................................................................................................................... 11 3.2. Safety instructions ...................................................................................................................... 11 3.3. Environmental considerations
    [Show full text]
  • Information on DW-TV 16:9 Widescreen Broadcasting
    Information on DW-TV 16:9 widescreen broadcasting Why is transmission being changed to 16:9 widescreen format? What is anamorphic distortion of a television picture? Why are anamorphically distorted television pictures broadcast? What does letterboxing mean? What does Pan & Scan mean? How is the screen format identified when transmitted via satellite? What does WSS stand for? How is the screen format identified when using a SCART connector? FAQs How do I set my appliance to enable automatic screen size adjustment? Viewer’s Information - TV with 4:3 screen format The program is broadcast in 16:9 format; the picture on my 4:3 screen is vertically distorted. How can I solve the problem? My television has a 4:3 screen format; when the program is broadcast in 16:9 format some picture content is cut off on both sides. How can I solve the problem? My television has a 4:3 screen format; I would like to watch 16:9 screen broadcasts in letterbox format. How can I solve the problem? Viewer’s information - TV with 16:9 screen format The program is broadcast in 16:9 widescreen format; even though I have a 16:9 flat screen television, my picture is vertically distorted and has black bars on both sides. How can I solve the problem? A program broadcast in 4:3 format is horizontally distorted on my 16:9 flat screen television. How can I solve the problem? My television has a 16:9 widescreen format; if the program is broadcast in 4:3 format, some picture content is cut off at the top and bottom? How can I solve the problem? I receive DW programs via satellite or via cable; even though I have a 16:9 flat screen television, the broadcast in 16:9 format has black bars surrounding the picture.
    [Show full text]
  • Video Demystified
    Video Demystified A Handbook for the Digital Engineer Fifth Edition by Keith Jack AMSTERDAM • BOSTON • HEIDELBERG • LONDON NEW YORK • OXFORD • PARIS • SAN DIEGO SAN FRANCISCO • SINGAPORE • SYDNEY • TOKYO ELSEVIER Newnes is an imprint of Elsevier Newnes Contents About the Author xix chapteri • introduction 1 Contents 3 Standards Organizations 5 Chapter 2 • Introduction to Video 6 Analog vs. Digital 6 Video Data 6 Digital Video 7 Video Timing 7 Video Resolution 9 Standard-Definition 9 Enhanced-Definition 9 High-Definition 11 Audio and Video Compression 11 Application Block Diagrams 11 DVD Players 11 Digital Media Adapters 12 Digital Television Set-Top Boxes 12 v vi Contents chapter 3 • Color Spaces 15 RGB Color Space 15 sRGB 16 scRGB 17 YUV Color Space 17 YIQ Color Space 18 YCbCr Color Space 19 RGB-YCbCr Equations: SDTV 19 RGB-YCbCr Equations: HDTV 20 4:4:4 YCbCr Format 21 4:2:2 YCbCr Format 22 4:1:1 YCbCr Format 22 4:2:0 YCbCr Format 22 xvYCC Color Space 26 PhotoYCC Color Space 26 HSI, HLS, and HSV Color Spaces 27 Chromaticity Diagram 28 Non-RGB Color Space Considerations 32 Gamma Correction 34 Constant Luminance Problem 36 References 36 chapter 4 • Video Signals Overview 37 Digital Component Video Background 37 Coding Ranges 37 480i and 480p Systems 39 576i and 576p Systems 48 720p Systems 56 1080i and 1080p Systems 59 Other Video Systems 64 References 67 / Contents vii chapter 5 • Analog Video Interfaces 68 S-Video Interface 68 SCART Interface 69 SDTVRGB Interface 71 HDTV RGB Interface 75 Constrained Image 77 SDTV YPbPr Interface 77 VBI
    [Show full text]
  • Widescreen Signaling (WSS) Aug 1998
    APPLICATION NOTE AN9716 Rev 1.00 Widescreen Signaling (WSS) Aug 1998 Introduction [1] 625-Line PAL and SECAM Systems To facilitate the handling of various aspect ratios of program DATA TIMING material received by TVs, a widescreen signalling (WSS) The first part of line 23 is used to transmit the WSS system has been developed. This standard allows a WSS- information, as shown in Figure 1. enhanced 16:9 TV to display programs in their correct aspect ratio. The clock frequency is 5MHz (100Hz). The signal waveform should be a sine-squared pulse, with a half- The Copy Generation Management System (CGMS-A) for amplitude duration of 200 10ns. The signal amplitude is analog PAL video signals will use some of the reserved bits. 500mV 5%. For analog NTSC video signals, EIA-744 adds CGMS capability to EIA-608. The PALplus system, which allows the The NRZ (non-return to zero) data bits are processed by a transmission of 16:9 programs over normal PAL systems, bi-phase code modulator, such that one data period equals 6 requires the presence of the WSS signal. elements at 5MHz. 625-line PAL and SECAM systems are based on ITU-R DATA CONTENT BT.1119 [2]; 525-line NTSC systems are based on EIAJ The WSS consists of a run-in code, a start code, and 14 bits CPX-1204. [3] For analog YUV video signals, WSS of data, as shown in Table 1. information should be present on the Y signal. For analog RGB video signals, WSS information should be present on all three signals.
    [Show full text]
  • Tvm-4Ma4ma Metadata Analyzer
    MODEL TVM-TVM-4MA4MA METADATA ANALYZER Metadata Analyzer The Videotek® TVM-4MA metadata analyzer discovers, reports, monitors and FEATURES triggers alarms on the ancillary data present in an HD or SD-SDI signal, as Discovery and reporting of location and repetition rate of all ancillary data well as VBI data in SD-SDI signals. It is designed for anyone who needs to verify data presence and confirm data contents. Other products on the market Data “dumping” to screen or file require a computer for display, or they force the user to scroll through a list of Decoding of common data types (AFD, closed caption, Dolby® metadata, all possible data identifiers to find the ones that are active. As networks make video payload, embedded audio) increasing use of the ancillary data space to control downstream equipment Template-based alarm setup and distribute information to affiliates, it is critical to be able to verify the • Missing data generation and transport of the myriad data types in use. • Extra data The TVM-4MA reports data location and repetition rate, and decodes and analyzes standard data types. The user can display data packet contents on the screen, or save them to a file for manipulation by external programs. Additionally, this helpful tool initiates an alarm when data goes missing or when new data types appear in the signal. www.amt.com VIDEOTEK® TVM-4MA Defined Data Types AFD and bar data Ancillary time code Dolby metadata DTV closed caption Embedded audio Video payload ID SD-SDI VBI data • Line 21 closed caption • Teletext • Widescreen signaling • Vertical interval time code Options Dual rackmount case Portable case with handle and tilt feet Australia power cord Europe power cord UK power cord Specifications Specifications are subject to change without notice.
    [Show full text]
  • CXD1914Q Digital Video Encoder
    CXD1914Q Digital Video Encoder Description The CXD1914Q is a digital video encoder 100 pin QFP (Plastic) designed for DVDs, set top boxes, digital VCRs and other digital video equipment. This device accepts ITU-R601 compatible Y, Cb and Cr data, and the data are encoded to composite video and separate Y/C video (S-video) signals and converted to RGB/YUV signals. Features Absolute Maximum Ratings (Ta=25 °C) • NTSC and PAL encoding modes • Supply voltage VDD –0.3 to +7.0 V • Composite video and separate Y/C video (S-video) • Input voltage VI –0.3 to +7.0 V signal output • Output voltage VO –0.3 to +7.0 V • R, G, B/Y, U and V (BetaCam/SMPTE level) signal • Operating temperature Topr –20 to +75 °C output • Storage temperature Tstg –40 to +125 °C • 8/16-bit pixel data input modes (VSS=0 V) • 13.5 Mpps pixel rate • 10-bit 6-channel DAC Recommended Operating Conditions • Supports I2C bus (400 kHz) and Sony SIO • Supply voltage VDD 4.75 to 5.25 V • Closed Caption (Line 21, Line 284) encoding • Input voltage VIN VSS to VDD V • Macrovision Pay-Per-View copy protection system • Operating temperature Topr 0 to +70 °C : NTSC Rev. 7.0, PAL Rev. 6.1 (Note 1) • VBID encoding I/O Pin Capacitance • WSS encoding • Input pin CI 11 (Max.) pF • Supports non-interlace mode • Output pin CO 11 (Max.) pF • Monolithic CMOS single 5.0 V power supply • 100-pin plastic QFP Note) Test conditions : VDD=VI=0 V, fM=1 MHz (Note 1) This device is protected by U.S.
    [Show full text]
  • Naturevue Video Signal Processor with Bitmap OSD, Dual HDMI Tx, and Encoder ADV8005
    NatureVue Video Signal Processor with Bitmap OSD, Dual HDMI Tx, and Encoder Data Sheet ADV8005 FEATURES Easy to use software tool for developing OSDs Video signal processor HDMI transmitters Full 12-bit, 4:4:4 YCbCr (color space) internal processing Dual 4k × 2k HDMI transmitters Motion adaptive deinterlacing with ultralow angle Audio return channel (ARC) support interpolation Dual audio insertion from TMDS Rx or from audio input pins Multiple video processing paths with up to 3 simultaneous Support for serial audio using the S/PDIF audio pin video streams including picture-in-picture (PiP) support 8-channel I2S audio inputs supporting up to 192 kHz Upscaling and downscaling to/from 4k × 2k sample frequency Aspect ratio conversion/panorama scaling 6-channel direct stream digital (DSD) audio inputs Cadence detection for the recovery of original frames from Noise shaped video (NSV) 6-DAC video encoder film-based content Six 12-bit NSV video DACs supporting SD, ED and HD video Dual video scalers enable simultaneous output of multiple Rovi Rev. 7.1.L1 (SD) and Rev. 1.4 (ED) compliant different resolutions Professional video features Sharpness and detail enhancement Capability to output up to 36-bit TTL pixel data Noise reduction for random, mosquito, and block noise Full color space converter on the output TTL pixel data Frame rate converter (FRC) TTL video, audio, SPI, and interrupt pins disabled by default Video metrics readback to enable correct phase and Ability to synchronize output video to externally applied frequency selection for
    [Show full text]
  • IQDNC34 User Instruction Manual Issue 1 Revision 3
    User Instruction Manual IQDNC34 Dual-channel 3G/HD-SDI Down Converter with Analog Outputs www.s-a-m.com IQDNC34 Information and Notices Information and Notices Copyright and Disclaimer Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen display looks etc. Information in this manual and software are subject to change without notice and does not represent a commitment on the part of SAM. The software described in this manual is furnished under a license agreement and can not be reproduced or copied in any manner without prior agreement with SAM or their authorized agents. Reproduction or disassembly of embedded computer programs or algorithms prohibited. No part of this publication can be transmitted or reproduced in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage and retrieval system, without permission being granted, in writing, by the publishers or their authorized agents. SAM operates a policy of continuous improvement and development. SAM reserves the right to make changes and improvements to any of the products described in this document without prior notice. Contact Details For details of our Regional Customer Support Offices, please visit the SAM website and navigate to Support/Contact Support. www.s-a-m.com/support/contact-support/ Customers with a support contract should call their personalized number, which can be found in their contract, and be ready to provide their contract number and details.
    [Show full text]
  • Dictionary of Video and Television Technology Newnes Is an Imprint of Elsevier Science
    Dictionary of Video and Television Technology Newnes is an imprint of Elsevier Science. Copyright © 2002, Elsevier Science (USA). All rights reserved. [This page intentionally left blank.] No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. Recognizing the importance of preserving what has been written, Elsevier Science prints its books on acid-free paper whenever possible. Library of Congress Cataloging-in-Publication Data ISBN: 1-878707-99-X British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library. The publisher offers special discounts on bulk orders of this book. For information, please contact: Manager of Special Sales Elsevier Science 225 Wildwood Avenue Woburn, MA 01801-2041 Tel: 781-904-2500 Fax: 781-904-2620 For information on all Newnes publications available, contact our World Wide Web home page at: http://www.newnespress.com 10 9 8 7 6 5 4 3 2 1 Printed in the United States of America Dictionary of Video and Television Technology Keith Jack Vladimir Tsatsulin An imprint of Elsevier Science Amsterdam Boston London New York Oxford Paris San Diego San Francisco Singapore Sydney Tokyo [This is a blank page.] CONTENTS Preface ............................................................................................................. vii About the Authors .....................................................................................
    [Show full text]
  • Tektronix: Video Test > Video Glossary Part 2
    Video Terms and Acronyms Glossary E E Mem – Term used for a panel memory system. Echo (or Reflection) – a) A wave which has been reflected at one or E1 – European digital transmission channel with a data rate of 2.048 kbps. more points in the transmission medium, with sufficient magnitude and time difference to be perceived in some manner as a wave distinct from EACEM – European Association of Consumer Electronics Manufacturers that of the main or primary transmission. Echoes may be either leading EAPROM (Electrically Alterable Programmable Read-Only Memo) – or lagging the primary wave and appear in the picture monitor as A PROM whose contents can be changed. reflections or “ghosts”. b) Action of sending a character input from a Earth Station – Equipment used for transmitting or receiving satellite keyboard to the printer or display. communications. Echo Cancellation – Reduction of an echo in an audio system by EAV (End of Active Video) – A term used with component digital estimating the incoming echo signal over a communications connection systems. and subtracting its effects from the outgoing signal. EB (Errored Block) Echo Plate – A metal plate used to create reverberation by inducing waves in it by bending the metal. EBR – See Electron Beam Recording. E-Cinema – An HDTV film-complement format introduced by Sony in EBU (European Broadcasting Union) – An organization of European 1998. 1920 x 1080, progressive scan, 24 fps, 4:4:4 resolution. Using a broadcasters that, among other activities, produces technical statements 1/2-inch tape, the small cassette (camcorder) will hold 50 minutes while and recommendations for the 625/50 line televi-sion system.
    [Show full text]
  • Manual HXC2000C01
    HXC2000C01 CROSS CONVERTER FROM 3G/HD/SD-SDI TO 3G/HD/SD-SDI WITH ADVANCED MOTION COMPENSATED DE-INTERLACING Version 1.0 Albalá Ingenieros, S.A. 07 March 2018 - © Albalá Ingenieros S.A. - All rights reserved Medea, 4 - 28037 Madrid - Spain HXC2000C01 HXC2000C01 CROSS CONVERTER FROM 3G/HD/SD-SDI TO 3G/HD/SD-SDI WITH ADVANCED MOTION COMPENSATED DE-INTERLACING Version 1.0 1. DESCRIPTION ...................................................................................................................... 5 1.1. The HXC2000C01 ........................................................................................................................... 5 1.2. Features ............................................................................................................................................. 6 1.3. Block diagram .................................................................................................................................. 7 2. SPECIFICATIONS ................................................................................................................. 9 3. INSTALLATION .................................................................................................................. 11 3.1. Initial inspection .......................................................................................................................... 11 3.2. Safety instructions ...................................................................................................................... 11 3.3. Environmental considerations
    [Show full text]
  • Glossaryvideo Terms and Acronyms This Glossary of Video Terms and Acronyms Is a Compilation of Material Gathered Over Time from Numer- Ous Sources
    Glossaryvideo terms and acronyms This Glossary of Video Terms and Acronyms is a compilation of material gathered over time from numer- ous sources. It is provided "as-is" and in good faith, without any warranty as to the accuracy or currency of any definition or other information contained herein. Please contact Tektronix if you believe that any of the included material violates any proprietary rights of other parties. Video Terms and Acronyms Glossary 1-9 0H – The reference point of horizontal sync. Synchronization at a video 0.5 interface is achieved by associating a line sync datum, 0H, with every 1 scan line. In analog video, sync is conveyed by voltage levels “blacker- LUMINANCE D COMPONENT E A than-black”. 0H is defined by the 50% point of the leading (or falling) D HAD D A 1.56 µs edge of sync. In component digital video, sync is conveyed using digital 0 S codes 0 and 255 outside the range of the picture information. 0.5 T N E 0V – The reference point of vertical (field) sync. In both NTSC and PAL CHROMINANCE N COMPONENT O systems the normal sync pulse for a horizontal line is 4.7 µs. Vertical sync P M is identified by broad pulses, which are serrated in order for a receiver to O 0 0 C maintain horizontal sync even during the vertical sync interval. The start H T 3.12 µs of the first broad pulse identifies the field sync datum, 0 . O V B MOD 12.5T PULSE 1/4” Phone – A connector used in audio production that is characterized -0.5 by its single shaft with locking tip.
    [Show full text]