DOCSLIB.ORG

Lifestyle Product Brochure Verandas, Glass Rooms, Carports, Awnings, Pergolas and Canopies 2 LIFESTYLE PRODUCT BROCHURE

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lifestyle Product Brochure Verandas, Glass Rooms, Carports, Awnings, Pergolas and Canopies 2 LIFESTYLE PRODUCT BROCHURE Lifestyle Product Brochure Verandas, Glass Rooms, Carports, Awnings, Pergolas and Canopies 2 LIFESTYLE PRODUCT BROCHURE Contents 6-9 The Simplicity 35 24-25 Glass Rooms Ideal for BIG SPAN CARPORTS, Glass Doors that compliment the COMMERCIAL CANOPIES and Simplicity Alfresco Range and WALKWAYS. enables protection from the weather. 10-13 The Simplicity 16 28-41 The Awnings Range Ideal for cost effective CARPORTS A range of RETRACTABLE AWNINGS and GARDEN CANOPIES. that provide protection from the sun. 14-16 The Simplicity 6 42-51 Bioclimatic Pergolas Ideal for GARDEN VERANDAS and A range of PERGOLAS where you are GARDEN CANOPIES. able to enjoy shelter from the sun and rain. 18-23 The Simplicity Alfresco 52 Product Configurator Ideal for BIG SPAN VERANDAS, The complete range in a chart for GLASS ROOMS and OUTDOOR easy reference.ALL ALUMINIUM DINING CANOPIES. SYSTEMS ALL HUNDREDS OF ALUMINIUM SATISFIED SYSTEMS CUSTOMERS HUNDREDS OF ALL SATISFIED ALUMINIUM UK SYSTEMS CUSTOMERS DESIGNED & MANUFACTURED HUNDREDS OF INNOVATIVE SATISFIED PRODUCT CUSTOMERS UK RANGE DESIGNED & MANUFACTURED MINIMUM OF INNOVATIVE 50 UK PRODUCT GROSS PROFIT DESIGNED & MANUFACTURED RANGE INNOVATIVE EASY INSTALLATION PRODUCT MINIMUM OF RANGE 50 GROSS PROFIT MINIMUM OF 50 GROSS PROFIT EASY INSTALLATION EASY INSTALLATION LIFESTYLE PRODUCT BROCHURE 3 ALL ALUMINIUM SYSTEMS HUNDREDS OF SATISFIED CUSTOMERS ALL ALUMINIUM SYSTEMS UK DESIGNED & MANUFACTURED HUNDREDS OF SATISFIED INNOVATIVE CUSTOMERS PRODUCT RANGE UK MINIMUM OF DESIGNED & 50 MANUFACTURED GROSS PROFIT ALL SIMPLICITY INNOVATIVE PRODUCT RANGES PROVIDE EASY EFFECTIVE COVER INSTALLATION RANGE FROM THE ELEMENTS. MINIMUM OF 50 GROSS PROFIT EASY INSTALLATION 4 LIFESTYLE PRODUCT BROCHURE Verandas, Canopies, Carports, Awnings & Glass Rooms LIFESTYLE PRODUCT BROCHURE 5 Verandas, Canopies, Carports, Awnings & Glass Rooms 6 THE SIMPLICITY 35 A FULLY ALUMINIUM SYSTEM WITH A 6M PROJECTION AND A FULL 10 YEAR GUARANTEE 35 THE SIMPLICITY 35 7 The Simplicity 35 Ideal for BIG SPAN CARPORTS, COMMERCIAL CANOPIES and WALKWAYS. The Simplicity 35 is our most popular The Simplicity 35 system features 35mm carport due to its durability, versatility, structured polycarbonate roof panels, and unlimited length. It is completely which are available in clear or opal and constructed from aluminium, giving you offers in excess of 98% UV protection a structure with unbeatable durability which reduces the risk of your vehicle together with a life expectancy of up paintwork fading. to 25 years. This robust system is also supplied with a full 10 year guarantee. They can also keep the interior of your vehicles cool by creating shade and The Simplicity 35 can be manufactured shelter, preventing unwanted heat on to any length to meet specific hot, sunny days. requirements and can span up to 6 The Simplicity 35 is also the perfect metres, enabling you to cover multiple The Simplicity 35 has a variable wall veranda or canopy for commercial cars easily with minimum posts. It has a pitch from 2.5° - 45° so that you can settings as well as private homes. modern, stylish appearance and benefits decide on the height of the wall-plate to from robust integral aluminium guttering suit your needs – ideal for taller vehicles This contemporary yet robust system which creates an attractive finish to the such as campervans and caravans. The has passed the ACR(M) 001:2005 Test structure whilst also ensuring a quick aluminium framework, which is supplied for Non-Fragility of Profiled Sheeted installation. Furthermore, this aluminium in white as standard, can be coloured Roof Assemblies and is certified as guttering requires minimal subsequent to any RAL or BS colour to match your a Non-Fragile system (providing the maintenance throughout the product’s existing window and door frames or to installation conforms to span and loading lifetime. create an attractive contrasting effect. charts – please contact us for more information). This glazing system must be used in conjunction with the supplied polycarbonate to conform to wind and snow loadings for the UK. The Simplicity 35 is available in any RAL or BS colour to meet specific requirements. OPTIONAL INTEGRATED LED LIGHTING 8 THE SIMPLICITY 35 BIG SPAN CARPORTS • COMMERCIAL CANOPIES • WALKWAYS THE SIMPLICITY 35 9 Options The Simplicity 35 can be fitted with optional gallows brackets, base castings and cast collars in any RAL colour. Basic Canopy Gallows included I purchased the carport for self assembly, your staff were always “available and could not do enough to help with the few questions I had.” Brian Puplett - Norwich, Norfolk Gallows, Base Castings & Cast Collars 10 THE SIMPLICITY 16 A COST EFFECTIVE CARPORT SYSTEM THAT IS QUICK AND EASY TO INSTALL 16 THE SIMPLICITY 16 11 The Simplicity 16 Ideal for cost effective CARPORTS and GARDEN CANOPIES. It’s simple; the Simplicity 16 has been The Benefits of using this system: that your investment lasts and has the developed with speed of installation, impact resistance and the snow loading durability and cost in mind. Due to All-aluminium system: The Simplicity capabilities for wherever you are in the UK. its clever design, the Simplicity 16 16 is only manufactured from aluminium provides a durable and attractive shade to offer exceptional longevity and easy Variable Roof Pitch: Unlike the majority and shelter solution at our most cost- maintenance. It also features hidden, of roof kits, which only offer a fixed effective price. It can project up to 3.5 integral guttering for a clean, modern pitch, the Simplicity 16 offers a pitch metres and has a lightweight roofing appearance. range of 2.5 degrees to 22.5 degrees to system, making it perfect for use as a give you that little bit extra. carport or veranda. High speed installation: We have developed this system in partnership The stylish modern design gives a look with one of the most prolific extrusion that is second to none, enhancing your designers in the industry. Through building’s aesthetics. It also offers his extensive expertise and using unbeatable structural performance, our knowledge gained from 25 years simply out performing all other carport experience, we have created the simplest and canopy systems pound for pound. fixing system possible. This highly versatile canopy and carport system offers a variety of solutions for: Impact resistance: Some of the systems on the market today use PVC or GRP • Carports which do not have the impact resistance • Verandas of polycarbonate. We only use triple wall • Smoking Shelters 16mm polycarbonate sheeting to ensure • Walkway Canopies • Covered Play Areas • Porch Canopies • Caravan Shelters UNBEATABLE STRUCTURAL PERFORMANCE 12 THE SIMPLICITY 16 Options The Simplicity 16 can be fitted with optional gallows brackets and base castings in any RAL colour. Basic Canopy Gallows included Gallows and Base Castings CARPORTS • GARDEN CANOPIES THE SIMPLICITY 16 13 Thank you very much for all your help we are very pleased with the way this “has been handled and the price and will highly recommend your company. We are exceptionally pleased with the whole thing. Our builders had never done anything like this before but have fitted it in wonderfully. Once again thank you to you and your team.” Mr and Mrs Cole - North Taunton 14 THE SIMPLICITY 6 A REVOLUTIONARY AND ELEGANT CANOPY SYSTEM THAT’S QUICK AND EASY TO INSTALL 6 THE SIMPLICITY 6 15 The Simplicity 6 Ideal for GARDEN VERANDAS and GARDEN CANOPIES. The Simplicity 6 is a stylish veranda, provides effective and stylish cover canopy and carport system that is from the weather for alfresco dining and glazed with a choice of 6mm toughened garden parties. glass or 6mm solid polycarbonate and includes integrated LED lighting. With a span of up to 3.2m (3.1m for the glass option) from its supporting wall, With elegant posts and optional glass and an unlimited length you will have a roofing, this product offers you a deluxe solution that can be adapted to suit your canopy or veranda at an affordable price. exact needs. By featuring the option of glass roofing, the Simplicity 6 offers improved acoustic The Simplicity 6 comes with a full properties – reducing the noise of rain 10 year guarantee and a 25 year drops during a downpour; these glass life expectancy, making this a real panels also provide a sparkling finish investment that you will be able to which is easy to maintain, particularly if enjoy for many years to come. you choose the self-cleaning glass. In addition to the glass roof why not add All framework is constructed from a screener veranda sun screen to the durable aluminium, with the option to structure. powder coat the structure to any RAL colour or BS colour of your choice. PITCH RANGE FROM The Simplicity 6 is the perfect veranda solution for domestic gardens and 2.5 TO 22.5 DEGREES 16 THE SIMPLICITY 6 GARDEN VERANDAS • GARDEN CANOPIES THE SIMPLICITY 6 17 Options The Simplicity 6 can be fitted with optional gallows brackets and base castings in any RAL colour. Basic Canopy Can I say that I am more that delighted with the fabulous verandas. “Neighbours have commented on how good they look and their desire to have an installation and I have passed on your details. Also my brother is very keen to have a quote for installation and will be contacting you very soon. Thank you so much for your professionalism, excellent customer care, and above all for your wonderful product. I love the slick, simple, “uncluttered” but robust design. It Gallows included has provided us with many wonderful days of family gatherings (sunny or not, dry or wet) out on the patio, lots of al fresco dining, wonderful family bbq’s. It provides the perfect solution to outdoor living – it retains the warmth without the unbearable heat of a conservatory, and who wants to step outside when its pouring with rain? It’s an absolutely wonderful addition to the home! No home should be without one! Many thanks, again.” Gallows and Base Castings Mrs.
Load more

Recommended publications
  • Door Awning : PA Series
    DOOR AWNING : PA SERIES Owner’s Manual For safety reasons, please carefully read and understand all written instructions and warnings in this manual prior to assembling or installing this product. TABLE OF CONTENTS Safety instructions and warnings........................................... 2 Package contents and parts .............................................. 3 Tool requirements ...................................................... 4 Product features ....................................................... 5 Installation Determine door awning location ..................................... 5 Assemble the door awning ......................................... 6 Install the door awning ............................................ 9 Maintenance.......................................................... 12 Warranty............................................................. 13 1 www.advaning.com Toll Free (US): (855) 574-0158 SAFETY INSTRUCTIONS AND WARNINGS • For safety concerns, please keep children away from the assembly area and from the assembly components. • Please properly dispose of all packing materials. • Consult with your local authorities if any permits are required prior to installation of Door Awning. • Follow all manufacturer’s safety instructions when using step ladders and/or power tools during installation. • Do not drill into walls where electric wiring, gas or water pipes may exist. • Please ensure that all screws are properly tighten when assembling the Door Awning. This product is intended for residential use only.
    [Show full text]
  • PD-32 Design Guidelines
    PD-32:SOUTH DESIGN GUIDELINES September, 2009 PREPARED BY: COLLABORATORS: CLARK & GREEN ASSOCIATES CITY OF LONG BEACH ALTOON+PORTER ARCHITECTS THE BOEING M C CLARAND VASQUEZ COMPANY EMSIEK & PARTNERS Th e Vision “Douglas Park” will turn an outdated and obsolete aircraft manufacturing facility into a vibrant mixed-use, pedestrian friendly community that combines the best elements of the older established planning traditions of Long Beach with the contemporary realities of business, retailing and modern lifestyles. “Douglas Park” will be focused on the shared public environment; from walkable tree lined streets, to a human scaled mixed-use “Main Street” with shopping, dining and other services, along with a variety of neighborhood open spaces, quality architecture, pedestrian connections and bicycle trails. At the same time, “Douglas Park” will incorporate the workplace, including a balanced blend of offi ce and other commercial opportunities to provide much needed employment. Service and recreational land uses will be located within comfortable walking distance of commercial areas to enhance the sense of community, off er unique lifestyle choices and reduce automobile dependence. “Douglas Park” will celebrate the products, the events, and the people who made history on the site through the incorporation of this memory into everyday living. Th is legacy will be remembered through a Public Art Master Plan designed to “tell the story” of the site in public areas such as open spaces, pedestrian paths, sidewalks, streets and parkways. “Douglas Park” represents a deliberate eff ort to establish a strong sense of community rather than an isolated aggregation of projects, by emphasizing neighborhoods rather than subdivisions, a main street rather than a shopping center and a mixed-use commercial district rather than a business park.
    [Show full text]
  • Requirements for the Construction of Awning Enclosures in Special Occupancy Parks
    Requirements for the Construction of Awning Enclosures in Special Occupancy Parks The following items are needed to apply for an HCD accessory building or structure permit: Review and complete an Application for Permit to Construct (HCD 50) included in this handout. Follow the instructions on the back of the form and make sure that park management signs section #5. This application requires an original (wet) signature of the management along with two copies. The application for the permit to construct shall be accompanied by fees as specified on the fee schedule when using the approved plan in this handout. Any deviation from the included plans will require a plan check and plan check fees. Review and complete a Lot Plot Plan (HCD 538) included in handout, indicating where the accessory building or structure is to be constructed on the lot to include dimensions of the structure, setbacks from lot lines, and separations from other structures. Follow the instructions on the back of the form and make sure that park management signs the “STATEMENT OF RESPONSIBILITY” on the front of this document. This application also requires an original (wet) signature of the management along with two copies. Review and complete the “Classification of Fire Hazard Severity Zone” form to determine if you are located in a Fire Hazard Severity Zone or a Wildland-Urban Interface Fire Area (WUI). An accessory building or structure shall be designed and constructed to withstand the snow loads for the area where it is constructed and comply with sections 1433 &1433.1. Submit the completed and signed permit and plot plan along with two copies to the office listed on the back of the Permit to Construct in addition to the following documentation: Three (3) complete sets of plans and specifications for the work to be performed.
    [Show full text]
  • Awning and Casement Window
    Standard Aluminum Series Windows & Patio Doors Architectural Manual Awning and Casement Window Please also see: NAIL-ON FIN An integral nailing fin extends 1” around the Standard Aluminum Options perimeter of the standard frame and is used to Full Lifetime Warranty attach the window into the rough opening. The fin is scored for complete removal for retrofit/wood stop installations. The fin is set back 1-1/16” from Overview the exterior edge of the frame. The optional H-Bar frame has no nailing fin and must be stopped in the All Standard Aluminum Series Casement and opening. Awning windows are available in both standard and custom sizes to match virtually any design, either WEEP SYSTEM new or retrofit. The rectangular weep holes are located in the frame sill for effective drainage and moisture control. Components GLAZING MATERIAL FRAME AAMA approved glazing tape adheres glass to the Frame components are made from 6063-T5 fixed and vent frame and seals and cushions the aluminum alloy with a structural wall thickness of glass. Rigid vinyl setting blocks are used to support .125 “, and non-structural wall thickness of .062”. the glass-unit, preventing glass slip-page and glass- The frame is available in clear and bronze anodized to-metal contact. Extruded vinyl glazing (snapin) finishes with a standard .4” mil coating thickness, bead is applied around the exterior edge. Metal and white baked enamel finish. Wide screw spacing bead is available at some locations. on the mechanically joined corners ensure a rigid connection with a consistent dimension. Corners GLASS are sealed for added protection from the weather.
    [Show full text]
  • Interior Jamb Extension -- 400 Series
    Andersen® Casement, Awning, Picture Window, and Specialty Windows Interior Jamb Extension Options Interior Jamb Extension Options for Andersen® Casement, Awning, Picture Window, and Specialty Windows INSTALLER: Please leave this guide with the building owner to file for future reference. Congratulations! You have just purchased one of the many fine Andersen products. For ease of installation and continued enjoyment of your Andersen product, please read and follow this Instruction Guide completely. If your abilities do not match this procedure's requirements contact an experienced contractor. You may direct any questions about this or other products to your local Andersen dealer. Andersen dealers can be found in the Yellow Pages under Windows. Thank you for choosing Andersen. Important Safety, Assembly, and Installation Information Proper assembly, installation and maintenance of Andersen products is essential if the benefits of experienced product design and engineering, quality materials, and skilled workmanship are to be fully attained. Every assembly and installation is different (windloads, structural support, etc.) and, Andersen strongly recommends consultation with an Andersen supplier or an experienced contractor, architect, or structural engineer prior to the assembly and installation of any Andersen product. Assembly and installation of Andersen products is the sole responsibility of the architect, building owner, contractor and/or consumer and Andersen has no responsibility in this regard. ! WARNING ! WARNING ! WARNING Use of ladders and/or scaffolding and Improper use of hand or Weight of window and door unit(s) working at elevated levels may be power tools could result in and accessories will vary. Use a hazardous. Follow equipment personal injury and/or product reasonable number of people with manufacturer's instructions for safe damage.
    [Show full text]
  • Adding an Addition, Deck, Awning, Or Porch to Your Manufactured Or
    What You Should Know: Adding an addition, deck, awning, or porch to your ProtectMyManufacturedHome manufactured or mobile home Some common changes to your manufactured or mobile home require a Washington State Department of Labor & Industries alteration permit, such as when adding a room or garage addition, deck, awning or porch. L&I has a four-step process to make changes. Here’s how: Step 1: See if you need to submit plans. You need to submit plans for any of the following conditions: The addition, deck, awning or porch uses the manufactured home for support. You are building a dormer on top of the manufactured home roof to match up the addition. (Note: Plans are not required when you use the manufacturer’s DAPIA-approved dormer drawings). If you are adding or widening an opening in the wall of the manufactured home. (Note: The L&I “door and window” fact sheet, www.Lni.wa.gov/go/F622-096-000, has additional information and exceptions). Plans must include: A floor plan of the original manufactured home, Get more information showing door, window and bedroom locations. Visit www.Lni.wa.gov/FAS A floor plan of the addition showing its location and the changes being made to the manufactured home. For structural issues, contact plan review at: 360-902-5218 Framing details for any dormer overframing on the roof of the home, showing materials, fastening and For general permit help, call customer connection to the roof of the home. service at: 360-902-5206 Framing and connection details for any construction Or email [email protected] changing or adding loads to the home.
    [Show full text]
  • Brisbane City Plan, Appendix 2
    Introduction ............................................................3 Planting Species Planning Scheme Policy .............167 Acid Sulfate Soil Planning Scheme Policy ................5 Small Lot Housing Consultation Planning Scheme Policy ................................................... 168a Air Quality Planning Scheme Policy ........................9 Telecommunication Towers Planning Scheme Airports Planning Scheme Policy ...........................23 Policy ..................................................................169 Assessment of Brothels Planning Scheme Transport, Access, Parking and Servicing Policy .................................................................. 24a Planning Scheme Policy ......................................173 Brisbane River Corridor Planning Scheme Transport and Traffic Facilities Planning Policy .................................................................. 24c Scheme Policy .....................................................225 Centre Concept Plans Planning Scheme Policy ......25 Zillmere Centre Master Plan Planning Scheme Policy .....................................................241 Commercial Character Building Register Planning Scheme Policy ........................................29 Commercial Impact Assessment Planning Scheme Policy .......................................................51 Community Impact Assessment Planning Scheme Policy .......................................................55 Compensatory Earthworks Planning Scheme Policy .................................................................
    [Show full text]
  • About Fabric Awnings
    AllAll AboutAbout FabricFabric AwningsAwnings All About Awnings • www.awninginfo.com All About Awnings AA guideguide forfor citycity officials,officials, architectsarchitects andand designdesign professionals.professionals. Table of Contents Professional Awning Manufacturers Association . 3 Summary of Building Codes . 4 General Design Considerations . 5 Purpose . 5 Style, Configuration, Color . 6 Size and Fit . 8 Economy . 8 Safety: Egress and Fire . 8 Stability . 9 Adhesive Anchors . 10 Strength . 11 Drainage and Ponding . 11 Graphics . 11 Frames Fixed vs . Moveable . 11 Benefits of Awnings and Canopies . 12 Energy . 12 Weather Protection . 12 Identification, Advertising . 12 Architecture . 12 Design Loads . 13 Dead Load . 13 Wind Load . 13 Snow Load . 14 Live Load . 15 Ponding . 16 Seismic Load . 16 Choices of Material . 17 Fabrics . 17 Framing . 18 Historical Awnings . 19 Partnerships . 19 Professional Awning Manufactures Association Glossary of Terms . 20 All About Awnings • www.awninginfo.com All About Awnings Sponsors . .Back Cover 2 All About Fabric Awnings Industrial Fabrics Association International (IFAI) IFAI is a not-for-profit trade association whose member com- panies represent the international specialty fabrics marketplace . Member companies range in size from one-person shops to multinational corporations; members’ prod- ucts span the entire spectrum of the specialty fabrics industry, from fiber and fabric suppliers to manufacturers of end products, equipment and hardware . Professional Awning Manufacturers Association (PAMA) PAMA, a division of IFAI, is open to companies that manufacture or sell awnings, as well as those who supply goods/services to the awning industry . PAMA’s Mission To establish PAMA and its members as the preferred first source for awning and awning related products and services to end users .
    [Show full text]
  • SUNAIR® Retractable Patio Awning
    SUNAIR® Retractable patio awning The Sunair® retractable patio awning model is our finest most versatile model of our retractable awning line. This product has evolved over the years as a top of the line awning product on the market using only the finest materials, with extremely attractive styling. The Sunair® model also comes standard with many of options not normally associated as standard on other awning systems. 4’2”, 5’7” Sunbrella, Lateral Arm 9 standard Through 35’ 6’11”, 8’7”, Deck, Patio Tempotest / Para, 10’2”, 11’6”, Awning Sunair colors 40’ possible & Storefront Sattler, 13’0”, 14’0” & Recasens Highest quality Lateral Arm Awning. Forged aluminum elbow and shoulder components. Double stainless PVC coated cable arm design for durability. 4:1 / 8:1 Bevel gear for most efficient operation. 15 year limited All aluminum extruded front bar, Torsion bar, and roller tube. 10” frame warranty Powder coated components and extrusions. A stop in the gear to prevent the fabric from over rolling. Stainless steel fasteners. Optional: One-piece aluminum hood system. Optional: XP Cross over arm & Valance Plus. Revised : Dec 14, 2018 BENEFITS OF AWNINGS Reduces indoor temperatures and energy costs while keeping you cool on your deck or patio. Reduce heat gain inside by as much as 77% and reduce sunlight and glare through your window by as much as 94% (see Minnesota energy study). A Sunair awning keeps you cool on your patio or deck, but it also minimizes your exposure to the sun’s harmful rays. A Sunair® retractable awning will increase your outdoor living area comfortably and efficiently at a fraction of the cost of a permanent addition Retractable Deck and Patio Awning Installations SUNAIR® MODEL FEATURES: COMPETITION SUNAIR® BENEFIT: All arm parts under stress Others typically Forged aluminum arm compo- are made of forged alumi- nents are stronger than all die ARMS uses all Die-cast or num including the shoulder, extruded aluminum castings or extrusions resulting elbow, and arm compo- arm parts and one in a stronger awning against the elements.
    [Show full text]
  • Installation Guide
    Version:E 2011-09 OOWWNNEERR’’SS MMAANNUUAALL FOR BBEEAAUUTTYY--MMAARRKK® Retractable Awnings MAUI ® DESTIN ® Manual and Motorized Awnings Do not leave the awning extended during extreme weather conditions such as wind, rain, snow and ice. The extreme weather conditions may cause the arms to break and can cause damage personal or injury to the property. Awntech does not take any responsibility for any weather related or improper handling damages. 1 TTaabbllee ooff CCoonntteennttss PAGE SECTION 3 Time required installing the awning 3 Parts 3 Required tools 4 Exploded view of the awning 5 Types of brackets 6-10 Determining bracket placements 11-19 Installation instructions for various surfaces 20 Installing the awning on the brackets 21 Adjusting the pitch 22-23 Conversion of the manual awning to motorized 24 Introduction to remote control 25-26 Limit control adjustments 27 Hood assembly and installation (see the revised) 28 Installing the pitch adjustment system 29 Installing the breeze support legs 30 Installing the center support bracket 31 Replacing the awning fabric 31 Replacing the valance 32 Replacing the arms 33 Warranty 34 Returns, Damages 35 Determining awning size and placing an order 36-37 Frequently asked questions 38 Risks, Warnings, and Warranty 39 Cleaning and caring 40 Technical specifications 41 Fabric specifications 2 IMPORTANT: THE RETRACTABLE AWNINGS ARE NOT DESIGNED TO LEAVE OPEN DURING HIGH WINDS, RAIN, SNOW OR ICY CONDITIONS. Do not leave the awning extended during extreme weather conditions such as wind, rain, snow and ice. Extreme weather conditions may cause the arms to break and can cause personal or property damage.
    [Show full text]
  • Design Guidelines for Historic Commercial Buildings
    DESIGN GUIDELINES FOR HISTORIC COMMERCIAL BUILDINGS D.C. HISTORIC PRESERVATION REVIEW BOARD Introduction Washington’s historic commercial buildings and the corridors in which they reside have a rich legacy that reflects the city’s history and economic vibrancy. These commercial buildings have served people from every profession and from all parts of the world, and the businesses and organizations they have housed celebrate Washington’s international flavor and cultural heritage. Maintaining the vibrant architecture of Washington’s commercial buildings and creating lively, inviting storefronts and streetscapes is a shared responsibility. These guidelines are provided for business owners, property owners, architects and designers, developers, contractors, neighborhood historic preservation groups, city revitalization organizations, and city agencies who all play a role in ensuring that the District’s commercial areas are attractive, dynamic and successful. A commercial area’s identity is defined in large part by its physical design – the overall layout of the streets and sidewalks, the physical placement of buildings and public spaces, and the design of individual commercial buildings. Washington’s commercial areas are defined not by rigid consistency but by variations in height, architecture, and materials that reflect the style, era of construction, and flavor of the surrounding neighborhood. These character- defining features of historic commercial buildings should be preserved, and new construction in commercial areas should be compatible with the overall design characteristics and scale of surrounding buildings. 1 Commercial Building Types Washington’s commercial buildings are diverse in style and era of construction, ranging from elegant, Italianate buildings of the 1870s to brick-front buildings from the 1890s to more modest one- and two-story structures from the early twentieth century.
    [Show full text]
  • When Is a Permit Required?
    TOWN OF ISLIP DEPARTMENT OF PLANNING AND DEVELOPMENT DIVISION OF BUILDING One Manitton Court, Islip, New York 11751 WHEN IS A PERMIT REQUIRED? The following is a general guideline of actions that may require a permit. All actions listed are subject to the New York State Uniform Code and the Town of Islip Zoning Code. If you do not see a particular action listed, please contact the Permits Department. This list may be updated periodically – please visit our website at www.islipny.gov for the latest list. Building & Plumbing Permit Inquiries: Engineering Site Plan Inquiries: Fire Prevention System Permit Inquiries: 631-224-5466 631-224-5360 631-224-5477 I. Permits are required for the following actions unless stated otherwise. Permit Action Type of Permit / Approval Required Miscellaneous Accessory ■ Building Permit – Accessory Structure – New / Any structure other than the main Structure Addition / Alteration building (i.e. barns, garages, carports, gazebos, pergolas, cabanas, etc.) Addition ■ Engineering Site Plan Approval Enlarging a structure by adding to the (commercial) ■ Building Permit - Main Building (or Accessory size in any direction. Structure) – Addition Addition ■ Building Permit – Main Building (or Accessory Enlarging a structure by adding to the (residential) Structure) – Addition size in any direction. Air Conditioning ■ Plumbing / HVAC Permit – AC Unit Install Central and ductless systems. System Alteration ■ Building Permit – Interior / Exterior Alteration Any change of structural elements or (interior & exterior) completing unfinished spaces. May include removal/replacement of interior finishes (insulation, sheetrock) – check with a Building Plans Examiner. Antenna (not including ■ Building Permit – Accessory Structure - Addition residential TV antenna) Apartments: ▪ Building Permit for New Building, Change of Use, Alteration, etc.
    [Show full text]