DOCSLIB.ORG

Tools for Timber Construction

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tools for Timber Construction CATALOGUE 2019 TOOLS FOR TIMBER CONSTRUCTION CARPENTRY FALL PROTECTION MEASURING TOOLS TRANSPORT REPAIR ITEMS DRILL BITS AND CUTTERS TEMPLATE INDEX PAGE CARPENTRY 4 FALL PROTECTION 14 MEASURING TOOLS 18 TRANSPORT 22 REPAIR ITEMS 26 DRILL BITS AND CUTTERS 32 TEMPLATE 42 Tools for timber construction 3 SKORPIO GEKO HOOKS PULLER PANEL PULLER CARPENTRY 1 • Hot-forged hooks with untempered stop points • For the precise assembly of solid wood panels, to prevent the risk of shards lamellar elements and more • With riveted joints in place of welds that could • The 360° rotary plates adapt to even the most break under stress difficult points of a structure, such as acute and obtuse angles CODE description CODE description plates 60 x 160 mm - 10 holes SKORPIO hooks puller 1 GEKO 1 from 8 mm and 1 holes from 12 mm SKORPIOH galvanized hook 1 GEKOPL plate with left side thread 60 x 160 mm 1 SKORPIOR 1 ratchet for perforated tape 1 GEKOPR plate with right side thread 60 x 160 mm 1 4 Tools for timber construction CRICKET 8-WAY RATCHET SPANNER CARPENTRY 1 • Ratchet spanner with through hole and 8 bushings of varying sizes • 4 ring spanners in a single tool • The most commonly used sizes are always at 2 hand CODE sizes [bush / thread M] length [mm] material 1 10 / M6 - 13 / M8 - 14 / (M8) - 17 / M10 CRICKET 340 forged steel 1 2 19 / M12 - 22 / M14 - 24 / M16 - 27 / M18 Tools for timber construction 5 STANDARD GIRAFFE DIN EN 18195 PROP CARPENTRY 1 2 • Quick adjustment with automatic lock • Made of galvanized steel • To be used with wood panels 1 2 3 CODE length [mm] weight [kg] material GIR2200 1 1180 - 2200 3,35 aluminium alloy 6060 1 GIR3000 2 1750 - 3000 with locking stop 9,8 zinc-plated steel 1 GIR4000 3 1750 - 4000 13 zinc-plated steel 1 6 Tools for timber construction GEOMETRY AND INSTALLATION ANCHOR PLATE LENGTH LOCK 150 CARPENTRY ø 13 ø 6 110 1 2 3 CODE LOCK ADJUSTMENT plate thickness 4 GIR2200 1 with the special pin with the lateral handle n° holes Ø 13 3 GIR3000 2 with the locking stop n° holes Ø 6 6 GIR4000 3 with the special pin CONNECTORS L L ETA 11/0030 JOINTING ON WOOD - HOLES JOINTING ON CONCRETE - dimensions [mm] description [mm] Ø 13 / HOLES Ø 6 HOLES Ø 13 Screw anchor for concrete SNK Ø 10 L = 120 - 200 mm* SKR ANCHOR Ø 12 L = 100 - 400 mm* SNK Ø 5 L = 45 - 120 mm* * The choice of length of the connection is assessed each time in function of the element to be supported, the type of support on which GIRAFFE is used and the load to be sustained. GIRAFFE INSTALLATION 1. Positioning of the wall and of the GIRAFFE, suitably adjusted in length 2. Insertion of the fasteners into the end plates 3. GIRAFFE length adjustment via the adjustment handle, for perfect wall verticality 4. STATIC EXAMPLE: A - 2 x SNK Ø 10 x 120 / B : 2 x SNK Ø 10 x 120 / L = 3,0 m / Fadm,max = 5,80 kN** 1 2 3 4 L L F 90° 45° A 45° B ** Complete technical datasheet and system calculation report (GIRAFFE + fasteners) available at: www.rothoblaas.com Tools for timber construction 7 WEDGES FLUSHING WEDGE - SIMPLE AND QUICK CARPENTRY LAYING • Resistant to mould and humidity • Sharp saw-toothed profiles for precise element jointing, include side joints • Precisely adjustable height CODE description sizes [mm] L x B x H max. capacity [kg] max. capacity [kg] 100 % 35 % - WDGGREEN green 80 x 30 x 10 200 80 1000 WDGORAN orange 80 x 40 x 8 200 80 500 WDGBROW brown 90 x 45 x 15 1700 600 500 WDGYELL yellow 150 x 45 x 25 2200 760 324 WDGSET TransPack (70 green - 60 orange - 75 brown - 40 yellow) 245 SHIM SHIM SPACERS LARGE SPACERS CODE colour size CODE colour size SHBLUE blue 100 x 22 x 1 500 LSHRED red 160 x 50 x 2 250 SHBLACK black 100 x 22 x 2 500 LSHGREEN green 161 x 50 x 3 250 SHRED red 100 x 22 x 3 500 LSHBLUE blue 162 x 50 x 5 250 SHWHITE white 100 x 22 x 4 500 LSHWHITE white 163 x 50 x 10 100 SHYELLOW yellow 100 x 22 x 5 500 LSHYELLOW yellow 164 x 50 x 15 100 8 Tools for timber construction JELLY PAINTING MACHINE FOR ELEMENTS WITH SECTION max. 300 x 90 mm CARPENTRY • Process elements on 1, 2, 3 or 4 sides, as needed • Working capacity: 2 people ca. 200 m2/h (on 4 sides) • Excess sealer can be recovered and put back in the container for re-use CODE description JELLY complete automatic sealer machine 1 JLL2015 rolls 6 JLL2020 brushes 12 JLL2025 nozzles 3 Tools for timber construction 9 PECKER PICARD 790 HAMMER FORGED FROM A SINGLE PROFESSIONAL HAMMER CARPENTRY PIECE OF METAL • Synthetic rubber handle • Forged from a single piece of metal, with prime choice untreated leather handle • Forged from a single piece of metal, with a balanced ergonomic grip • The balanced handle ensures excellent control and maximum impact force CODE weight head [g] CODE weight head [g] PECKER 600 1 PIC790 600 1 10 Tools for timber construction CARPENTRY POUCH 1 TOOLS BAG • Double polyester tool bag, with belt 2 • Single leather tool bag, with belt • Belt with clip fastener 3 CODE description POUCH1 1 double tool bag with belt 1 POUCH2 2 single tool bag with belt 1 POUCH4 3 hammer holder 1 Tools for timber construction 11 PINCER TIP PINCER LEVER HOOKS PULLER LEVER CLAMP CARPENTRY • The insertable tip ensures maximum stability • Allows you to work up to 5 times faster than with a traditional clamping • Its wide stop surface simplifies tip insertion into the wood • Tightening torque of up to 7,5 kN opening scrapping profile opening scrapping profile CODE CODE [mm] [mm] [mm] [mm] [mm] [mm] PINTIP60 600 120 27 x 13 PINLEV1430 300 140 25 x 12 PINTIP80 800 140 30 x 15 PINLEV1260 600 120 25 x 12 12 Tools for timber construction PINCER LEVER KOI JAPANESE HAND SAW CARPENTRY CODE description KOI30 japanese saw 30 cm 1 KOI302 spare blade 1 FUGU PRECISION CUTTING JAPANESE SAW CODE description FUGU265 precision saw 26,5 cm 1 FUGU265R spare blade 1 BLADE INSULATION KNIFE THAT CAN BE USED ON BOTH SIDES CODE length [cm] BLADE 28 1 Tools for timber construction 13 LADDER FIX MOBILE LADDER HOOK FALL PROTECTION FALL • Prevents the mobile ladder from sliding or falling • Can be attached to any ladder produced according to EN 131/1 • Guarantees constant optimal distribution of forces between the ladder and support surface CODE B [mm] L [mm] H [mm] weight [kg] LADFIX 310 1000 60 2,2 1 14 Tools for timber construction DOMENET FABRIC NET FOR SKYLIGHTS FALL PROTECTION FALL • Fast and easy installation due to the lighter weight and anchoring device with adjustable band • Temporary anchoring device for short-term operations on flat roofs • Offered in two sizes, can adjust to most square shaped skylights on the market CODE description B [m] L [m] DOME22 skylight nets 2 2 1 DOME33 skylight nets 3 3 1 Tools for timber construction 15 CLASS A2 STANDARD HORIZONTAL NET EN 1263-1 HORIZONTAL POLYPROPYLENE FALL PROTECTION SAFETY NET FALL PROTECTION FALL • It requires a limited number of fastening systems (maximum distance between anchors: 2,5 m) • Various nets can be joined together to secure larger areas • Also available in other colours by request (red, blue, white) and in personalised format for larger nets mesh rope weight CODE B [m] L [m] [mm] [mm] [kg] HOR510 5 10 100 Ø 5 11,4 1 HOR610 6 10 100 Ø 5 13,7 1 HOR1010 10 10 100 Ø 5 22,9 1 HOR7515 7,5 15 100 Ø 5 25,7 1 Each fastening point must withstand a minimum load of 6 kN COMPLEMENTARY PRODUCTS - FASTENING CODE description rope [mm] HORFIX fastening rope Ø 14 HORCONNECT fastening rope Ø 6 It can be ordered by the metre 16 Tools for timber construction CLASS A2 STANDARD VERTICAL NET EN 1263-1 LATERAL POLYPROPYLENE FALL PROTECTION SAFETY NET FALL PROTECTION FALL • Roof edge or scaffolding protection system • Possible installation by inserting each individual link in the scaffold pipe or via fastening straps (optional) • Also available in other colours by request (red, blue, white) mesh rope weight CODE B [m] L [m] [mm] [mm] [kg] VER210 2 10 100 Ø 5 4,5 1 COMPLEMENTARY PRODUCTS - FASTENING CODE description L [mm] pmin [mm] VERBENT fastening strap Ø 14 700 Tools for timber construction 17 BEAVER PEACOCK CARPENTER’S SQUARE ALFA SQUARE CODE sizes [mm] CODE sizes [mm] BEAVER 800 x 320 1 PCK8043 800 x 430 1 PCK9048 900 x 480 1 MEASURING TOOLS BEEKIT PEACOCK DUO SET OF CARPENTER’S SQUARE, ALFA ALFA DOUBLE SQUARE SQUARE AND SLIDING T BEVEL CODE description CODE sizes [mm] carpenter’s square, alfa square BEEKIT 1 PCKD8043 800 x 430 1 and sliding T bevel 18 Tools for timber construction FLAMINGO EMU ALUMINUM SLIDING T BEVEL CARPENTER’S SQUARE ALUMINIUM CODE sizes [mm] CODE sizes [mm] FLAMINGO 300 1 EMU2515 250 x 150 1 EMU4020 400 x 200 1 MEASURING TOOLS PEACOCK DUO Tools for timber construction 19 PENCILS RULER CARPENTERS’ PENCILS FOLDING RULER • The yellow pencil has a soft lead, ideal for use • Made of high quality red beechwood. The edges on wood are slightly rounded for a more comfortable grip • The blue pencil has a more durable lead and is MEASURING TOOLS ideal for harder surfaces • Equipped with a 90° self-locking system on each joint.
Load more

Recommended publications
  • ARC 328W / 392W Wood Design Unique # 00780 / 01195 Spring
    ARC 328W / 392W Wood Design Instructor – Mark Maček Unique # 00780 / 01195 [email protected] Spring 2019 office hours TTh 2:30 - 5:30 pm by appointment Build Lab GOL 1.101 GOL 3.106 Objectives Practice woodworking skills: tool sharpening, layout, millwork, joinery, gluing, & sanding. Learn the characteristics of the material wood, including specific species. Analyze the strength of wood joints. Design a piece of furniture based on a program, with materials and techniques in mind. Understand the point of view of the maker within the design process. Complete the final project. Schedule The first six weeks, we practice solid wood joinery using hand tools and power tools. This is a crucial time to attend every day and stay current. There will be an assignment each week due on Tuesday morning. Students sharpen chisels and mill lumber so it’s flat and straight. Our discussions are grounded in wood’s cellular structure and anisotropy. Strength derives from long grain, weakness from the lack of long grain. Changing moisture content creates expansion and contraction in predictable ways. We will study furniture design history and visit the shops of Austin craftspeople to see how they work. The final project is one piece of furniture of your choice of program. It must be mostly solid wood, no digital fabrication, and no larger than 25 cubic feet. Final project design assignments include sketches, scaled drawings, models at 3”=1’-0”, and full-scale mock-ups. The class holds two design reviews before construction begins, allowing seven weeks for completion. The class participates in school-wide final reviews with other design studios.
    [Show full text]
  • Hand Saws Hand Saws Have Evolved to fill Many Niches and Cutting Styles
    Source: https://www.garagetooladvisor.com/hand-tools/different-types-of-saws-and-their-uses/ Hand Saws Hand saws have evolved to fill many niches and cutting styles. Some saws are general purpose tools, such as the traditional hand saw, while others were designed for specific applications, such as the keyhole saw. No tool collection is complete without at least one of each of these, while practical craftsmen may only purchase the tools which fit their individual usage patterns, such as framing or trim. Back Saw A back saw is a relatively short saw with a narrow blade that is reinforced along the upper edge, giving it the name. Back saws are commonly used with miter boxes and in other applications which require a consistently fine, straight cut. Back saws may also be called miter saws or tenon saws, depending on saw design, intended use, and region. Bow Saw Another type of crosscut saw, the bow saw is more at home outdoors than inside. It uses a relatively long blade with numerous crosscut teeth designed to remove material while pushing and pulling. Bow saws are used for trimming trees, pruning, and cutting logs, but may be used for other rough cuts as well. Coping Saw With a thin, narrow blade, the coping saw is ideal for trim work, scrolling, and any other cutting which requires precision and intricate cuts. Coping saws can be used to cut a wide variety of materials, and can be found in the toolkits of everyone from carpenters and plumbers to toy and furniture makers. Crosscut Saw Designed specifically for rough cutting wood, a crosscut saw has a comparatively thick blade, with large, beveled teeth.
    [Show full text]
  • February 2004 Fleam
    True Japanese Dovetail Saws 2 new rip-tooth dozuki saws are efficient dovetailers. utting dovetail pins and tails is primarily a ripping C operation. So it has always bewildered me that almost every Japanese saw sold for dovetailing had teeth designed for crosscut- ting or cutting plywood. A few specialty importers do sell Japanese backsaws with a rip- tooth configuration, but these are made mostly by hand and cost between $140 and $1,500. Why, I wonder, isn’t there a machine-made dozuki that sells for about $35 – the cost of a de- cent crosscutting dozuki? Well, I don’t have the answer yet, but the two new rip-tooth dozukis on the market are considerably less expensive (between $70 and $80). To check the quality, I com- pared them to a premium rip- tooth dozuki that I’m quite fa- miliar with – the Kaneharu rip- ping dozuki, sold by Hiraide America for $182 (see the Sources box for more information). Sure they look like standard dozukis, but these saws have rip teeth.We by Christopher Schwarz compare the Kaneharu (in use) with new saws from Harima-Daizo (left) Comments or questions? Contact Chris and Lee Valley (right). at 513-531-2690 ext. 1407 or Photo by Al Parrish Photo by [email protected]. 62 POPULAR WOODWORKING February 2004 Fleam The Kaneharu saw has graduated teeth. Near the handle (left) there are 15 teeth per The Lee Valley saw has 18 tpi and a The Harima-Daizo Deluxe saw has inch, while at the toe (right) there are 10 tpi.This combination of tpi makes the saw small fleam that it uses for crosscutting.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Gränsfors Bruks Small Forest Axe VS Roselli Long Axe
    Gränsfors Bruks Small Forest Axe VS Roselli Long Axe Outdoors-Magazine.com http://outdoors-magazine.com Gränsfors Bruks Small Forest Axe VS Roselli Long Axe James - Gear reviews and tests - Edged tools - Axes and hatchets - Publication: Monday 8 September 2003 Description : I find axes in the 50 cm size very useful, much more than hatchets that can be easily replaced by a knife. Here is a comparative of two very different small axes. Copyright (c) Outdoors-Magazine.com under a Creative Commons Attribution-Non-Commercial-Share Alike License Copyright © Outdoors-Magazine.com Page 1/11 Gränsfors Bruks Small Forest Axe VS Roselli Long Axe The Roselli long axe, and just below, the Gränsfor Bruks SFA The same, here shown with a huge japanese saw, Note the differences in length and compactness Copyright © Outdoors-Magazine.com Page 2/11 Gränsfors Bruks Small Forest Axe VS Roselli Long Axe The Gränsfors Bruks Small Forest Axe Here in it's sheath Copyright © Outdoors-Magazine.com Page 3/11 Gränsfors Bruks Small Forest Axe VS Roselli Long Axe Here stuck in a piece of olive wood The Small Forest Axe, is a very nice looking axe. The head is forged (machine forged), and the handle is some nicely grained american hickory wood. The poll can be used as a hammer. The Small Forest Axe (SFA) is really targeted at nordic forests, so its head is very thin and concave after the bevel, excellent for limbing and cutting in soft green woods. It is very well balanced, and handling it is a pleasure. It comes with a sturdy leather head protection.
    [Show full text]
  • Paradoxical Territories of Traditional and Digital Crafts in Japanese Joinery
    Paradoxical Territories of Traditional and Digital Crafts in Japanese Joinery While one can argue that a certain traditional craft such as Japanese Joinery should remain adhered to its processes, materials and methods, others could see potential possibilities that might be explored through applying contemporary technological advancements such as digital fabrication and engineered timber. This can only leave us with more questions than answers; what are the advantages and the possibili- ties? Does technology offer a “one size fits all” solution to any building material, or are there profound limitations? Where do we draw the line between traditional and contemporary craftsmanship? INTRODUCTION AHMED K. ALI When Torashichi Sumiyoshi and Gengo Matsui wrote their 1989 book titled Wood Joints in Texas A&M University Classical Japanese Architecture, Computer Numerically Controlled technology (CNC) and digital fabrication methods as we know it today were still in its infancy. While Japanese join- ery has traditionally been reserved for solid heavy timber, the increased use of both CNC and engineered timber (CLT, Glulam, LVL,..etc) as a sustainable material and an alternative to concrete and steel gives rise to number of interesting questions. While one can argue that a certain traditional craft such as Japanese Joinery should remain adhered to its pro- cesses, materials and methods, others could see potential possibilities that might be explored through applying contemporary technological advancements such as digital fabrication and engineered
    [Show full text]
  • Gardener's Saw
    Gardener's Saw Outdoors-Magazine.com http://outdoors-magazine.com Generic Gardener's Saw James - Gear reviews and tests - Edged tools - Saws - Publication: Saturday 13 July 2002 Description : A light, cheap, and very efficient saw. Copyright (c) Outdoors-Magazine.com under a Creative Commons Attribution-Non-Commercial-Share Alike License Copyright © Outdoors-Magazine.com Page 1/5 Gardener's Saw I often hear about big blades, hatchets, axes, but rarely about saws: By example, this is a 160 grams, 20cm (8"), 10 US$, carbon steel saw, with a blade lock, and rubbery handle cover, sold as garden saw. I cut a 4x2" pine wood in two in 30 to 60 seconds with it. I doubt one can do faster by whacking! (it is also the best wood-cutting saw I have ever owned, due to the fine, sharp and deep teeth) Here it is near my Soldier SAK Copyright © Outdoors-Magazine.com Page 2/5 Gardener's Saw Copyright © Outdoors-Magazine.com Page 3/5 Gardener's Saw I have used it on many occasions outdoors, camping, or when a big blade is not "politically correct", and I am quite happy about it. These saws are generally Japanese made, and show teeth that are designed to cut wood across the fibers (cross-cut teeth) and only on pulling. This way, the blade can be maintained very thin, as there is no chance to warp it or break it when pushing. Opinel does some similar saws, with the same cross-cut teeth, one based on a #12 handle, and one definitively longer.
    [Show full text]
  • Of 10 Straightening Bent Handsaw Blades
    Page 1 of 10 Straightening Bent Handsaw Blades The best Western and Japanese handsaws are quite thin yet in competent hands won’t kink in a cut, and the spring steel they are made from is tempered to allow sharpening with files. They are usually taper ground in two dimensions, so the blade’s cutting edge is thicker than the back, and both the back and the cutting edge taper from the saw’s heel to the saw’s toe. The thinner the cutting edge, the greater the taper, and the higher the polish, the higher the saw’s quality, as taper results in less set required for the teeth, aided by the steel’s polish that inhibits binding in the cut. All these features allow for a narrower kerf requiring less sawing effort. There are two fundamental choices in manufacturing a thin saw that won’t kink. The least expensive choice is to make the saw stiff by using hard steel and disposable blades, because such saws can’t be economically re-sharpened. The second choice is to temper the saw so that it can be filed, and to stiffen it by tensioning the blade using hammer and anvil. When a thin blade is struck on an anvil by a convex-faced round hammer, a dimple is created; often so small it can’t be seen by the eye. Steel from the area around the dimple is pulled inwards toward the point of impact, making the steel in the circular area radiating from the dimple stiffer, or “tensioned” on its surface.
    [Show full text]
  • Japanese Wood
    JAPANESE WOOD The tools, techniques and philosophies that make Japan’s unique woodworking culture so special, and CRAFTSMANSHIP the lessons that can be learnt by makers in the UK HUGH MILLER 1 “Masonry and steel are ‘building’ materials. Wood is a ‘thinking and building’ material” Fukushima Katsu, 2015 Timber elevation in the Gion district of Kyoto 2 3 Tools and Techniques of Japanese Woodwork: 30 Control of the Pull-Stroke Use of Water Contents: Use of Fire Slice over Scratch Philosophies of Making: 56 An Absence of Noise Executive Summary: 6 Maintenance over Robustness Abstract A Search for Lightness Key Themes & Findings Experimentation and Innovation Summary of Recommendations A Contribution to Harmony About the Author 11 A Japanese Contemporary Vernacular Aesthetic: 96 A Maker’s Guide Acknowledgements 12 Japanese Contemporary Vernacular Aesthetic in Architecture Introduction 15 Conclusion 108 The Anatomy of this Study: 16 Recommendations 112 Structure Scope and Duration Bibliography and Further Reading 120 Methods Map 122 Craftsmanship and Society in Japan: 18 Craftsmanship in Everyday Life Tending the Flame of Tradition The Veneration of the Practitioner over the Object Age and Gender in the Order of Precedence Planes and chisels stored in Sugawara The Pressure-Cooker Effect Hiroyuki workshop, Saitama 4 5 Abstract: Executive Summary: In November and December 2015 I travelled to Japan on a Winston Churchill Memorial Fellowship in order to uncover what it is that makes wood craftsmanship in Japan so special. From their unique set of tools, to the many obscure techniques that have been developed, to the philosophies that guide decision making, there is something different about Japanese woodworking.
    [Show full text]
  • 2017 Packet 5/27 Web Version
    37TH ANNUAL DENVER FALL SHOW AND SALE Page !1 Table of Contents: The Denver Museum of Miniatures, Dolls & Toys Show & Sale Admission Prices 1 Package Deals & A La Carte Options 2-3 Roundtable Workshops 3 Incentive GiFt Details 4 Dealer List 4 Pre-Paid Workshops 5-8 September 6 - 10, 2017 Children’s Workshops 9 Make-It/Take-It 9 Mini Mansion Mystery will weave a tale oF Fantasy, mystery (not murder) and mischievousness not to be believed. The Fun Filled RaFFles 9 weekend with lots oF great giFts and workshops plus camaraderie Exhibit Room Honoree 10 extraordinaire, For which the Denver show is Famous, will include a Exhibits 10 special ALL DAY WORKSHOP. The box room will provide not only a rewarding piece at the end oF a day well spent, but a back drop For Hotel & Travel InFo 10 many oF the wonderFul giFts you will receive over the weekend, or Exhibit/Volunteer Forms 11 house your own idea oF an elegant room setting. The special as- Volunteers Needed! 11 always Sales Room will oFFer treats beyond expectations. Enter the mysteries oF this Mansion’s secrets as you explore its Fantasies and Removable Registration 12-13 reveal its hidden surprises. Read through this registration Form For Show Schedule 14 descriptions oF events, workshops and giFts and see them in color on DMMDT Museum 15-16 the website. Another “Evening with the Experts,”,sharing skills and ideas, is on Thursday and is FREE to all. Many choices are limited in size so sign up early and don’t miss out! Co - Chairs Dona Mandell 303-321-1078 A special feature this year is the Franklin Mint “Rose Cottage”, which has been donated to the museum by joan Eischen’s estate.
    [Show full text]
  • Yestermorrow Design/Build School Woodworking Certificate Program
    Yestermorrow Design/Build School Woodworking Certificate Program Yestermorrow's 11-week Woodworking Certificate program is designed to give amateurs and aspiring professionals a solid grounding in woodworking and furniture- making techniques, led by Yestermorrow's talented and nationally recognized faculty. Skills learned in the program include design and drafting, wood selection and preparation, joinery, traditional hand skills, sharpening, power tool techniques, and finishing. The curriculum has a strong focus on the integration of design in the woodworking process, part of Yestermorrow's core philosophy of design/build. The Certificate begins with an analysis of trees and the wood they produce, an overview of felling and milling practices, and an introduction to the tactile essence of working with green wood. The program then moves into the realm of Cabinetry, in which students become oriented to the tools of the woodshop and basic principles of wood movement and layout. Additional program segments include Beginning Furnituremaking, Traditional Handtool Chairmaking, Joinery, Boxmaking, Care & Repair of Shop Machines, Small Scale Design/Build, Intermediate Furniture Techniques, and Wood Finishes. The program culminates in a two-week studio where each student will design and build a piece of his or her own choosing. The Certificate will be led by Program Director Justin Kramer – furniture designer, woodworker, sculptor, and educator. Other instructors include Steve Skonieczny, Randy Taplin, Andrew Russell, Kim Winkle, Joel Taplan, and other guests. This year’s program will be offered twice: January 31st through April 15th and September 4th through November 18th. Classes are generally scheduled 9am-5pm Monday through Friday, with some occasional weekend shop days and evening lectures/shop time.
    [Show full text]
  • The Anarchist's Tool Chest" by Christopher Schwarz
    An Index To "The Anarchist's Tool Chest" By Christopher Schwarz A List of Photographs & Illustrations A List of Personages Mentioned Notable Quotes Index created by Suzanne Ellison Published by Lost Art Press LLC Copyright 2011 An Index to "The Anarchist's Tool Chest" -- A -- Anarchy: 10, 24-27, 339-353, 459-460 aesthetics 10, 346-347 Cincinnati Time Store 343-344 craftsmanship 349-350 design 350-351 'Josiah Warren: The First American Anarchist' (quote) 347-348 'Native American Anarchism' (quote) 24, 347 switching from money to time 342-346 tools 351-353 tool chests 353 woodworker's perspective 24-27 Appendices: 463-471 tool list comparison (1658-1973) 463-466 tool dealers & organizations 467-471 Appliances for the workshop: 283-306 bench hook 283-285 cork-backed sanding block 293-294 end grain shooting board 287-290 long grain shooting board 290-291 mitre box 286-287 mitre shooting board 291-293 sawbenches 285-286 workbench & rules for 294-306, see Workbench Arkansas Chris Schwarz and 35, 44-46, 187 oilstones hard & soft 269-270 Auger bits: 30, 218-222 auger bit file 221 cleaning 220 cutting lip 221-222 lead screws 219-222 spirals 222 spurs 221 Awls: 31, 224-226 birdcage 31, 224-225 brad 225 marking 225-226 -- B -- Band saw: 42-43, 182 Bailey (style) plane: 63 Bathing suit area: 51 Beading plane, see Planes Beckets: see Exterior Add-ons under Tool Chest Bench hook: 31, 283-285 Bench planes, see Planes Belt sander: 41 Birdcage awl, see Awl Block plane, see Planes Boat building expressions: 115-116 Bombproof (or bulletproof) joinery: 350, 361, 419 Bowsaw, see Saws Boxwood rules: 130-132 buying 130-131 graduations 131 left & right reading 132 lightening the boxwood 132 Brace: 30, 212-216 chuck 214 features 213-214 pad 216 ratcheting 215 sweep 214-215 Brad point bits: 32, 223-224 HSS (high speed steel) 223 quality 223-224 Burning an inch: 133 Burnisher (for card scraper): 30, 279-281, see Sharpening Systems Buying tools: 50-56, 62, 467-471 Appendix 467-471 bench planes 62 new tools 53-55 vintage tools 50-53 -- C -- Cabinet scraper (No.
    [Show full text]