DOCSLIB.ORG

Request for Contract Update

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Request for Contract Update DocuSign Envelope ID: A1CCD536-4B79-470B-B764-44571F284A04 Request for Contract Update Pursuant to the terms of contract number_R for Office Supplies, Related Products & Services. Contractor must notify and receive approval from Region 4 ESC when there is an update in the contract. No request will be officially approved without the prior authorization of Region 4 ESC. Region 4 ESC reserves the right to accept or reject any request. RAE Security hereby provides notice of the following update on (Contractor) this date 11/24/2020 . Instructions: Contractor must check all that may apply and shall provide supporting documentation. Requests received without supporting documentation will be returned. This form is not intended for use if there is a material change in operations, such as assignment, bankruptcy, change of ownership, merger, etc. Material changes must be submitted on a “Notice of Material Change to Vendor Contract” form. Authorized Distributors/Dealers Price Update Addition Supporting Documentation Deletion Supporting Documentation Discontinued Products/Services x Products/Services Supporting Documentation x New Addition Update Only Supporting Documentation Other Contract Notification States/Territories Supporting Documentation Supporting Documentation Notes: Contractor may include other notes regarding the contract update here: (attach another page if necessary). RAE Security is requesting to add Medeco Price Book to our contract R171304.. Catalog is attached for Medeco Price Book. Medeco is an Electronic and Mechanical Keying system provider that is a great addition to security at school districts and other members. Intelligent Keying at 30% Off List and Mechanical Keying at 40% Off List 12/8/2020 | 12:19 PM PST Submitted By: Graham McIntyre Approved by Email: Date Title: VP Denied by Email: Date Email Address: [email protected] Region 4 ESC: DocuSign Envelope ID: A1CCD536-4B79-470B-B764-44571F284A04 2020 Product Catalog U.S. Prices Effective December 1, 2019 DocuSign Envelope ID: A1CCD536-4B79-470B-B764-44571F284A04 DocuSign Envelope ID: A1CCD536-4B79-470B-B764-44571F284A04 2020 Product Catalog 3 Table of Contents Medeco Mechanical Technologies Key Control ..............................................................................4 Medeco3 Technology ............................................................66 How to Order ..........................................................................8 BiLevel Technology ................................................................67 Online Tools ............................................................................9 Medeco X4 Technology ........................................................68 Record of Authorization (ROA) User Guide .....................10 Shipping and Returns Policy ...............................................13 Medeco B Technology ..........................................................112 Warranty .................................................................................15 Architectural Specifications ................................................16 Mechanical Products Professional Services ............................................................18 Rim and Mortise Cylinders ..................................................70 Intelligent Key Systems Key-In-Knob/Lever Cylinders ..............................................81 Interchangeable Cores .........................................................103 Medeco XT...............................................................................22 LFIC ..........................................................................................................103 Programming and Management ............................................23 SFIC ..........................................................................................................111 Intelligent Keys ..................................................................................25 Key Management ...................................................................118 Intelligent Key Cabinet (IKC).......................................................26 Access Interface Module (AIM) .................................................31 Intelligent Key Cabinet (IKC).......................................................118 Traffic Cabinet Lock ........................................................................32 T21 Key Management System ...................................................120 Rim and Mortise Cylinders ..........................................................33 Secure Programming and Charging Device .......................121 Dual-Tech Cylinder ..........................................................................34 International Cylinders .........................................................122 Dual-Tech Cams ................................................................................34 Interchangeable Core Cylinders ...............................................35 Deadbolts ...............................................................................152 Key-In-Knob/Lever Cylinders ......................................................35 Maxum ..................................................................................................153 Padlocks................................................................................................37 Residential Maxum .........................................................................165 Cam and Utility Cylinders ...........................................................38 Padlocks ...................................................................................167 International Cylinders .................................................................39 All Weather Padlocks .....................................................................173 Specialty Cylinder Formats .........................................................39 Protector II Series .............................................................................173 Keys and Accessories .....................................................................40 System Series .....................................................................................176 Programmers and Accessories .................................................41 Hockey Puck .......................................................................................187 G8R ..........................................................................................................188 M3 CLIQ® ...................................................................................43 Cam/Cabinet and Switch Locks ..........................................189 Rim and Mortise Cylinders ..........................................................44 Cam Locks ...........................................................................................190 Key-In-Knob/Lever Cylinders ......................................................44 Removable Core Cam Locks .......................................................194 Interchangeable Core Cylinders ...............................................46 Cabinet Locks .....................................................................................200 Deadbolts ............................................................................................47 Plunger Locks .....................................................................................202 Padlocks................................................................................................48 Micro Switch Lock ............................................................................203 International Cylinders ..................................................................50 ™ Rotary Switch Lock ..........................................................................205 CLIQ CONNECT Keys ....................................................................51 ™ CLIQ Go ...............................................................................................52 Keys and Accessories ......................................................................53 Accessories Programming and Management .............................................54 Keying Charges ..................................................................................207 ® Keys .........................................................................................................209 Classic CLIQ ...........................................................................56 Pin Kits ...................................................................................................213 Rim and Mortise Cylinders ..........................................................57 Components ......................................................................................216 Key-In-Knob/Lever ...........................................................................57 Tools and Fixtures ............................................................................217 Interchangeable Core Cylinders ...............................................60 Key Machines .....................................................................................218 Padlocks................................................................................................60 Software and Support ...................................................................218 Deadbolts ............................................................................................61 Cam and Utility Cylinders ............................................................62
Load more

Recommended publications
  • The Historyof Locks
    Master Locksmiths Association History of Locks Museum Part II - Catalogue of Exhibits This section is in artefact numerical order to facilitate quickly KEY TO ABREVIATIONS finding the relevant notes to items on display. There is also an Art No. Artefact number Class main classification alphabetical index at the end of this section CoR: country or region FDL: found date & location FM- Fordingbridge Museum We hope you enjoy the selections featured here. You are Hz: hazards welcome to mark up the records (pencils provided) with KID keeper ID number Loc location missing or additional information for inclusion in future MLA-HR MLA- Heritage Room reprints/editions. The artefacts on display are periodically Mt: materials PFC- formally: Peter Frima Collection changed or updated; this also corresponds with a new edition Ref No. former ID number(s) of this book. We also welcome your artefact/document Sn: serial number Sz: size donations to feature in future displays either here in the MLA THC- The Heritage Collection Heritage Lock Room or the History of Locks Museum Lock Wt: weight Rooms and Archive, more information from: [email protected] Class/Title: Date: c – Art No: Serial number: Country or Region: y m d – Group /KID Maker or Brand Image thumbnail Size: Materials: Weight: Hazards: FdL: Found date/location period – /Loc /Ref No. Description/Notes/Provenance. style - 006 Hobbs Key: Parautoptic, 6 levers. 19th century THC- /1947 CoR: England. 1860’s MLA- Sz: 135mm. Mt: steel. Wt: 96g. HR9/2 Bankers Changeable 6 lever key with both adjustable steps and removable bit. 011 Price, George Lock: Cut cabinet.
    [Show full text]
  • The Lock Collector from Tony Beck January/March 2006 Issue No
    The Lock Collector From Tony Beck January/March 2006 Issue No. 10 All Ri ghts Reserved. Copyright ©, R. A. Beck 2006. Editor’s Note: This issue extends the miserly single page biography of Edwin C otterill included in the last one! He stands highly amongst the greatest English lock inventors, particularly for his Climax Det ector lock patented in 1846. This issue contains Part 2: His Middle Age and Lock Inventions. The final Part 3 will follow next i ssue. Most of us will know of Willenhall Lock Museum’s demise and transformation to The Locksmith’s House. All this involved co nsiderable change when the Black Country Living Museum became the new owners in May 2003. Richard Hopkins, who helped them to de al with the complexities of cataloguing the Locks, Keys and Archive material, has kindly contributed an article setting out what was involved. I do hope it will be found interesting, and perhaps some questions will arise. Like - will an Inventory of all the locks, keys and archives be sometime available to view? Does the Museum intend to consult with lock collectors on what items are to be exhibited in the Locksmith’s House apart from those initially on show? Also what plans are there to introduce the Museum’s exhibits held in BCLM’s Dudley store to public view? It’s certainly sad to see the opportunity lost that might have seen finance being provided to expand and create a fine Museum dedicated to locks and keys; like there is in Austria, France, German y, Holland, U.S.A., etc.
    [Show full text]
  • Keying Systems and Nomenclature
    KEYING SYSTEMS AND NOMENCLATURE Keying Procedures, Systems, and and the authors of the previous FOREWORD Nomenclature was first published in editions should take pride in the 1965, revised in 1969, 1975 and again results. in 1978. It introduced a procedural There are still some misapplications system of keying terminology radically and misunderstandings of the system different from that commonly used and it is the purpose of this edition to prior to 1965. The need for standard clarify the system to avoid terminology was clear but the misunderstanding. With this in mind, acceptance of the new system was text and format changes have been slow. made with the aim of introducing Manufacturers, Distributors, Building criteria in their order of complexity, to Owners, and Operators were make the manual an even better frustrated over the use of various and instructional tool for those progressing differing terms. Among those using the through basic, intermediate, and terms, different meanings and advanced study of the subject. interpretations were applied. As a Since the manual does not cover result, errors were made, and frequent actual keying procedures, the title of correspondence occurred between the manual has been changed. For manufacturers and distributors, those interested in the actual seeking clarification. The consumer techniques of keying or the sometimes had a sketchy mathematics of setting up a key understanding of the key system he system, many fine books and had purchased. publications are offered by the lock- Since its inception, the procedures smithing industry. outlined in this manual have been taught at the DHI Technical Programs Robert Perry, AHC/CDC John R.
    [Show full text]
  • 2340-002-ASSA ABLOY Key Control Design Guide
    Key Control Design Guide Increase the Safety and Security of Your Facility A security solution from ASSA ABLOY Group brands: CORBIN RUSSWIN | MEDECO | SARGENT | YALE Contents I. Introduction . 2 II. Recommended Companion Document . 3 III. Comprehensive Model Key Control Policy a. Purpose. 4 b. Specification. 5 c. Enforcement . 6 d. Elements of a Key Control Policy . 7 Key Control Authority (KCA). 7 Storage. 7 Key Management Formats . 8 Record Keeping . 10 Policies and Procedures . 10 1. Identifying Keys and Keying 2. Issuing Keys 3. Returning Keys 4. Non-returned key policy 5. Administration of the Master Key System 6. Audits 7. Transfer/Temporary use Forms. 13 Servicing . 15 IV. Condensed Model Key Control Policy . 16 V. Specific Applications: a. Educational K-12. 18 b. Healthcare Facilities . 19 c. Colleges and Universities . 21 d. Office Buildings. 22 VI. Glossary of Terms and Definitions. 23 © ASSA ABLOY SALES & MARKETING GROUP INC. 2005, 2006, 2007. All rights reserved. 3 Introduction This “Key Control Design Guide” is brought to you by ASSA ABLOY, the world’s leading group of manufacturers and suppliers of locking solutions, dedicated to satisfying end-users’ needs for security and safety. Providing key systems and associated hardware is only the beginning. For end-users to successfully enjoy the benefits of the products we furnish, and to extend the life and value of a key system, proper policies must be in place. The policies and procedures suggested in this manual can play an essential part in increasing the safety and security of any facility. This manual should be used as a model or guide only.
    [Show full text]
  • LOCKSMITH Dictionary
    LOCKSMITH Dictionary Copyright , 1982 by the ALOA Sponsored National Task Group for Certified Training Programs, Master Keying Study Group Copyright , 1983 by the ALOA Sponsored National Task Group for Certified Training Programs, Master Keying Study Group Revised June, 1984 Copyright , 1996 by the Lock Industry Standards and Training Council, Master Keying Study Group Copyright , 1997 by the Lock Industry Standards and Training Council Copyright , 2000 by the Lock Industry Standards and Training Council Copyright , 2001 by the Lock Industry Standards and Training Council Copyright , 2002 by the Lock Industry Standards and Training Council Copyright , 2003 by the Lock Industry Standards and Training Council Copyright , 2004 by the Lock Industry Standards and Training Council Copyright , 2005 by the Lock Industry Standards and Training Council Copyright , 2006 by the Lock Industry Standards and Training Council Copyright , 2007 by the Lock Industry Standards and Training Council Copyright , 2009 by the Lock Industry Standards and Training Council Copyright , 2010 by the Lock Industry Standards and Training Council Copyright , 2011 by the Lock Industry Standards and Training Council Copyright , 2012 by the Lock Industry Standards and Training Council Study group and LIST Council members have included: Jerome Andrews Vaughan Armstrong Jimmy Benvenutti Greg Brandt Breck H. Camp Joe Cortie Billy B. Edwards Jr. Ken Ehrenreich G.L. Finch Dorothy Friend Kristine Gallo Ray Hern A.J. Hoffman Wiegand Jensen David J. Killip Mike Kirkpatrick William Lynk Gordon S. Morris Dan Nicholson Don O'Shall Brian O'Dowd Lloyd Seliber Jon Payne Sharon Smith John Truempy Roger Weitzenkamp Jym Welch All rights reserved. Permission is hereby granted to reprint terms and definitions contained herein with the following stipulations: 1.
    [Show full text]
  • Regulatory Guide 5.12, Revision 1
    U.S. NUCLEAR REGULATORY COMMISSION October 2016 OFFICE OF NUCLEAR REGULATORY RESEARCH Revision 1 Technical Lead A. Tardiff REGULATORY GUIDE REGULATORY GUIDE 5.12 (Draft was issued as DG-5027, dated January 2015) GENERAL USE OF LOCKS IN THE PROTECTION AND CONTROL OF: FACILITIES, RADIOACTIVE MATERIALS, CLASSIFIED INFORMATION, CLASSIFIED MATTER, AND SAFEGUARDS INFORMATION A. INTRODUCTION Purpose This regulatory guide (RG) describes methods and procedures that the staff of the U.S. Nuclear Regulatory Commission (NRC) considers acceptable for the selection, use, and control of locking devices. Locks can be used in the protection of: areas, facilities, certain radioactive materials, and specific types of information (e.g., classified matter, National Security Information (NSI), Restricted Data (RD), Formerly Restricted Data (FRD), Safeguards Information (SGI)). Applicable Regulations • U.S. Code of Federal Regulations, “Domestic Licensing of Production and Utilization Facilities,” Part 50, Chapter I, Title 10, “Energy” (10 CFR Part 50), (Ref. 1). Specifically Section 10 CFR 50.34 "Contents of applications" requires under (c)(1) that "[e]ach applicant for an operating license for a production or utilization facility that will be subject to §§ 73.50 and 73.60 of this chapter must include a physical security plan" and under (c)(2) "[e]ach applicant for an operating license for a utilization facility that will be subject to the requirements of § 73.55 of this chapter must include a physical security plan…" • 10 CFR Part 50, Appendix R, “Fire Protection Program for Nuclear Power Facilities Operating Prior to January 1, 1979,” requires under III.N.4, that the fire brigade leader shall have ready access to keys for any locked fire doors.
    [Show full text]
  • Section 12 Misc. Locking Devices
    Misc. Locking Devices Misc. "Locking" Hardware Index B Section 12 Barrel Bolts 3 Billy Buttons 17 K BurglaBars 5 V Kee-Bloks 16 C Keyed Chain Door Locks 5 Vendors Keyed Window Bolts 8 AMERICAN 2, 14 Camper Locks 14 BARGMAN 14 Chain Door Fasteners 5 L CAL AMERICA 4 Chain Guards 5 Latch Bolts 2 COMPX NATIONAL 8 Charley Bars 2 Locking Bolts 2 CORBIN RUSSWIN 16 D&D Tech. 9, 10, 11, 12, 13 D M ENGERT'S 2 Door Guards 4 EXIT SECURITY, INC 2 Magnetic Safety Gate Latches 10 Double-Bolt Locks 4 GLYNN JOHNSON 16 Multi Purpose Deadlocks 6 HITCH SAFE 18 E O ILCO 5 IVES 4 Electro-Mechanical Locks 18 Outboard Motor Lock 15 MAG 5, 6, 7 Exit Security Bars 2 MAJOR 2, 7, 16 P F MARKS HARDWARE 8 MASTER 14, 15 Padlock Eyes 15 Flip Locks 7 NSP/S-LINE 3 Patio Door Locks 2, 5, 6, 7 Flush Bolts 8 S. PARKER HDWE 3, 5, 6, 8, 15 Patio Door Security Pins 6 Forte Hasp Locks 9 SARGENT & GREENLEAF 3, 18 Push Pull Latches 16 Forte PullBolt 9 SENTRY 6 S STRY-BUC 2 G SUNCOAST SECURITY 17 Screen Door Locks 6 Garage Door Locks 7, 8 TRILEEN 5 Screen Door Strikes 6 Gate Hardware 8, 11, 12, 13 ULTRA HARDWARE 17 Security Drop Bolts 10 Gate Hinges 11 WATCHGUARD 8 Sliding Deadbolts 3 Gate Latches 8, 12 Sliding Door Locks 5, 6, 17 W Gate Locks 8, 13 Spring Bolts 3 Gun Locks 14 Window Locks 5, 6, 7 Surface Mounted Deadbolts 6, 7 H T Hasp Locks 9, 15 Tamper-Proof Door Locks 2 Hasps 14, 15 Hitch Safe 18 Hospital Push/Pull Latches 16 1 A s s u r e d L o c k T o o l a n d S u p p l y TOLL FREE: 888-318-8940 www.assuredlock.net BARS, SECURITY BOLTS, LOCKING LOCKING BOLTS MAJOR Locking Bolts AFC-1976NR.
    [Show full text]
  • 08/12/2013 Key Issuance Procedures Purpose
    Key Issuance Procedures Effective Date: 08/01/2012 Revision Date: 08/12/2013 KEY ISSUANCE PROCEDURES PURPOSE: To establish procedures governing the maintenance of access to facilities while safeguarding the personal safety and protecting the physical assets of students, faculty, and staff, protecting the property of Louisiana State University, and avoiding potentially significant costs due to theft, vandalism, or excessive rekeying of locks. The responsibility for developing and implementing key control procedures is with the Office of Facility Services. The systematic control of locks, keys and card access cards is one of the most important components of any safety program. Without proper key and card access control, locks provide little deterrence to illegal or unauthorized entry into a facility. Successful lock and key control requires the cooperation and efforts of several parties, including: Facility Services-Designs and maintains the integrity of the system LSU Police Department-Provides oversight Departments-Safeguards facilities under their use by maintaining proper key assignment policies and security systems and being financially responsible for the cost of rekeying and replacing lost keys Individual faculty, staff, and students-Safeguards assigned keys from loss or theft, and reports these occurrences immediately These procedures apply to all facilities on the Louisiana State University campus and remote locations. POLICIES 1. Keys are and remain at all times the property of Louisiana State University. 2. Keys will be issued to faculty, staff, and graduate students only. 3. Individuals are only allowed 1 issuance of a particular key, no spare keys are allowed. 4. Faculty and staff members will be issued keys consistent with job responsibilities, actual need and the approval of the Department Head or Dean.
    [Show full text]
  • VA HANDBOOK 0730/4 Washington, DC 20420 Transmittal Sheet March 29, 2013
    Department of Veterans Affairs VA HANDBOOK 0730/4 Washington, DC 20420 Transmittal Sheet March 29, 2013 SECURITY AND LAW ENFORCEMENT 1. REASON FOR ISSUE: This Handbook establishes mandatory procedures for protecting lives and property within VA's jurisidiction, by updating Appendix B, "Physical Security Requirements and Options." This issue provides updated requirements for securing temporary storage facilities of information technology equipment, and providing other updated physical security requirements. 2. SUMMARY OF CONTENTS AND MAJOR CHANGES: a. Summary. This replaces Appendix B of VA Handbook 0730, August 11, 2000. This Appendix sets forth specific requirements and options for protecting VA people and assets. b. Major Changes (1) Inserted physical security requirements specific to protecting VA information technology assets in temporary storage or staging areas. (2) Inserted a policy requirement for annual physical security surveys of key activities and spaces withinVA's jurisdiction. (3) Corrected errata and misnumbered paragraph items in the previous version of this Handbook. 3. RELATED DIRECTIVES: VA Directive 0730, May 27, 2010. 4. RESPONSIBLE OFFICE: The Police Service (07B), Office of Security and Law Enforcement, Office of Operations, Security, and Preparedness is responsible for the material contained in this handbook. 5. RESCISSION: Appendix B of VA Handbook 0730/2 May 27, 2010 is rescinded and replaced with this version. CERTIFIED BY: BY DIRECTION OF THE SECRETARY OF VETERANS AFFAIRS: lsI lsI Stephen W. Warren Jose D. Riojas
    [Show full text]
  • LSS+ MASTER EXHIBIT LISTING Page 1
    LSS+ MASTER EXHIBIT LISTING LOCKS, SAFES, AND SECURITY LSS+ Version 5.0 Electronic Infobase Version 5.0, based upon the Second Edition, published by Charles C. Thomas, Springfield Illinois, 2000. The original edition was published in 1970 and is no longer available. Table of Contents Chapter 1 The Lock: Four Thousand Years of Technology Chapter 2 The Last Twenty-Five Years Chapter 3 Definition of Terms Chapter 4 Tools and Supplies Chapter 5 Materials and Processes Chapter 6 The Development of Keys Chapter 7 Processes and Materials for Producing Blank Keys Chapter 8 Methods of Producing Cut Keys Chapter 9 Producing Keys for Specific Locks Chapter 10 High-Security Locks and Keys Chapter 11 Keying Systems Chapter 12 Basic Lock Configurations: Hardware Chapter 13 Warded Locks Chapter 14 The Lever Tumbler Lock Chapter 15 Wafer Locks Chapter 16 Pin Tumbler Locks Chapter 17 Traditional Mechanical Locking Systems Chapter 18 Electromechanical Locks Chapter 19 Magnetic Locks Chapter 20 Wireless Exchange of Code Information Chapter 21 Intelligent Keys and Locks Chapter 22 Programmable Locks and Keys Chapter 23 Specialized Industry Applications Chapter 24 Investigation and Evidence Involving Locks and Keys Chapter 25 Forensic Examination: Specifications, Operations, and Security Chapter 26 Forensic Examination: Tool Marks and Trace Evidence Chapter 27 Forensic Examination of Keys Chapter 28 General Introduction to Bypass Chapter 29 Picking Chapter 30 Impressioning Chapter 31 The Decoding of Locks: Theory, Procedures, and Technologies Chapter 32 Destructive
    [Show full text]
  • Get Ultimate Key Precision and Advanced Key Security
    Get ultimate key precision and advanced key security Brady SafeKey Lockout Padlocks Made like no other Brady SafeKey Lockout Padlocks In the last 50 years we’ve seen a manufacturing technology boom matched only by the industrial revolution. In fact, industrial maintenance employment has grown by more than 20% in the last decade.* With these advances, lockout needs have grown. Choose SafeKey Lockout Padlocks, exclusively from Brady, to lock in to ultimate key precision and advanced key security for years to come. With this innovatively designed padlock you get up to 700% more unique key possibilities than a standard safety padlock, without sacrificing a secure lockout. It’s all in the forward-thinking design of the locking mechanism and unique key blade that gives you more precision and control in your lockout programme. With that level of precision, you’re covered from your simple to highly complex lockout needs. You also get: • easy operation with extra smooth key insertion and removal – even when wearing gloves! • fast identification with the colour-matched key and lock body • years of use with the low-friction locking mechanism that helps maintain key integrity • excellent durability in every industrial environment 9 different colour options available *U.S. Bureau of Labor Statistics. (2019, January 22). Occupational Employment Statistics. https://www.bls.gov/oes/tables.htm 2 See the difference in the details Product innovations are only as good as the benefits they provide. See the difference you get with the patent-pending SafeKey Lockout
    [Show full text]
  • Office of Financial Management |
    STATE OF WASHINGTON OFFICE OF FINANCIAL MANAGEMENT STATE HUMAN RESOURCES DIVISION | DIRECTOR’S REVIEW PROGRAM P.O. Box 40911 ∙ Olympia, WA 98504-0911 ∙ (360) 407-4101 ∙ FAX (360) 586-4694 DATE: September 11, 2017 TO: Connie Goff Rules and Appeals Section Chief FROM: Meredith Huff, MPA, SPHR Director’s Review Specialist SUBJECT: Charles Halcomb v. Dept. of Corrections (DOC) Allocation Review Request ALLO-17-035 DIRECTOR’S DETERMINATION This position review is based on the work performed for the twelve-month period prior to January 19, 2017, the date that DOC Human Resources (HR) received a request for a review of Charles Halcomb’s position. As the Director’s Review Specialist, I carefully considered the exhibits and written communication provided by the parties. After review and analysis of Mr. Halcomb’s assigned duties and responsibilities, I conclude Mr. Halcomb’s position is correctly allocated to the Locksmith Supervisor classification. BACKGROUND Mr. Halcomb submitted a Position Review Request (PRR) to DOC HR on January 19, 2017, requesting reallocation of his position from Locksmith Supervisor to Maintenance Mechanic 4. (Exhibit B-2) Ms. Mindy Portschy, HR Consultant, DOC HR Classification Unit, conducted a review of Mr. Halcomb’s position. By letter dated March 28, 2017, Ms. Portschy notified Mr. Halcomb that his position was correctly allocated to the Locksmith Supervisor classification. On April 26, 2017, Mr. Halcomb submitted a request for a Director’s Review of DOC’s determination. (Exhibit A-1) This is a written review based on the submitted information. Director’s Determination Charles Halcomb ALLO-17-035 Page 2 RATIONALE FOR DIRECTOR’S REVIEW The purpose of a position review is to determine which classification best describes the overall duties and responsibilities of a position.
    [Show full text]