DOCSLIB.ORG

Pintbrook™ Urinal Vitreous China Barrier Free Pintbrook™ Urinal

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Pintbrook™ Urinal Vitreous China Barrier Free Pintbrook™ Urinal PINTBROOK™ URINAL VITREOUS CHINA BARRIER FREE PINTBROOK™ URINAL • Vitreous china • High Efficiency operates in the range of 0.125 gpf to 0.50 gpf (0.47 Lpf/1.9 Lpf) • Powerful washdown action • Optimized chinaware contours provide superior splash protection • 3/4" inlet top spud • Outlet connection threaded 2" NPT • Wall hangers included • Fixture only • Made in Mexico (NAFTA compliant) ❏ 6002.001 Top spud Nominal Dimensions: 366 x 364 x 575mm (14-7/16" x 14-5/16" x 22-5/8") Recommended working pressure – between 20 psi at valve when flushing and 80 psi static SEE REVERSE FOR ROUGHING-IN DIMENSIONS Compliance Certifications - Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008/CSA B45.1-08 for Vitreous To Be Specified: China Fixtures ❏ Color: ❏ White ❏ Flush Valve: 0.5 gpf Flush Valve: Sensor-Operated: ❏ American Standard Selectronic® #6063.051.002 DC Power 0.5 gpf Flush Valve: Manual-Operated: ❏ American Standard #6045.051.002 0.125 gpf Flush Valve: Sensor-Operated: ❏ American Standard Selectronic® #6063.013.002 DC Power 0.125 gpf Flush Valve: Manual-Operated: ❏ American Standard #6045.013.002 When used with 0.125 gpf or 0.5 gpf urinal flush valves M143 © 2016 AS America Inc. spec_6002.001 Pintbrook Urinal Rev. B 7/16 PINTBROOK™ URINAL VITREOUS CHINA BARRIER FREE FINISHED WALL 64mm 108mm to 133mm (2-1/2") (4-1/4" to 5-1/4") MANUAL SUPPLY OVERRIDE DN 20mm 15 BUTTON (3/4" I.P.S.) 419mm (16-1/2") 292mm (11-1/2") WALL HANGERS (INCLUDED) 326mm (12-13/16") 575mm 366mm (22-5/8") (14-7/16") 334mm (13-1/8") 13mm 364mm 140mm (14-5/16") (1/2") (5-1/2") C/L OF 432mm (17") OUTLET MAXIMUM 610mm (24") OPTIONAL 102mm TO FINISHED (4") FINISHED FLOOR FLOOR 2" N.P.T. GASKET 10mm FEMALE (3/8") OUTLET CONNECTION 102mm (4") 16mm (5/8") 2" N.P.T. INSIDE THREADS FINISHED WALL DETAIL OF OUTLET CONNECTION NOTES: FLUSH VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. MEETSMEETS THE AMERICANSAMERICANS WITH WITH DISABILITIES DISABILITIES ACT GUIDELINES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE ANDAND USEABLEANSI A117.1 BUILDINGS ACCESSIBLE AND AND FACILITIES USEABLE BUILDINGS - CHECK ANDLOCAL CODES. WhenFACILITIES installed - CHECK so top LOCAL of rim CODES. is 432mm (17") maximum from finished floor. When installed so top of rim is 432mm (17") from finished floor. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. M144 © 2016 AS America Inc. spec_6002.001 Pintbrook Urinal Rev. B 7/16 SELECTRONIC® SENSOR-OPERATED URINAL FLUSH VALVE, 0.5 GPF BATTERY POWERED MODEL NUMBER: ❑ 6063.051.002 Exposed, sensor-operated flush valve for 3/4" top spud urinals, 0.5 gpf. Inlet includes 3/4" sweat solder kit and angle stop with back flow protection and vandal-resistant cap. Outlet includes 3/4" high back pressure vacuum breaker with spud coupling and flange. OPERATING PRESSURE: 20 psi (flowing) - 80 psi (static) GENERAL DESCRIPTION: Exposed, sensor-operated Selectronic® Urinal Flush Valve for 3/4" top spud urinals. CR-P2 lithium FLOW REQUIREMENT: battery powered. 10 gpm (37.9 L/min.) PRODUCT FEATURES: BATTERY LIFE: • Factory-Installed CR-P2 Lithium Battery 4 years @ 4,000 flushes per month • Pressure Compensation feature ensures accurate flush volume regardless of inlet water pressure OPTIONAL ACCESSORY: • Self-Cleaning Piston with integral wiper spring • Cast wall flange with set screw (6065816.002) significantly reduces clogging and maintenance • 12-1/2" long vacuum breaker (M964446-0020A) • No Routine Maintenance no diaphragms to replace; - 4" longer than standard no filters to clean • Selectronic ® Proximity System with universal sensor provides hygienic, "hands free" operation 57 mm (2-1/4" MIN.) 108 mm-134 mm (4-1/4" TO 5-1/4") • State-of-the-Art Electronics prevent ghost flushing • Dezincification Resistant brass alloy • Fully Mechanical Manual Override Button can flush 292 mm the valve without power (11-1/2") -C-L- SUPPLY DN 20 • Fail-Safe: Valve automatically closes upon loss of (3/4" I.P. S.) power or water pressure and does not need to be reset • Adjustable Sanitary Flush cleans the fixture & maintains the trap seal. • Stadium Feature: Valve automatically switches to water savings mode during periods of heavy usage FINISHED • Chemical Resistant EPDM Seals for extended life WALL • High Back Pressure Vacuum Breaker • Adjustable Tailpiece • Range can be adjusted manually or with optional remote control • No external volume adjustment. FINISHED FLOOR • Can be installed left or right handed RECOMMENDED SPECIFICATION: Electronic, sensor activated urinal flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging. Includes a factory-installed CR-P2 lithium battery and fully mechanical manual override that can flush the valve without power. Includes dezincification-resistant brass valve body and metal cover with chrome finish. Includes angle stop with back-flow protection & vandal-resistant cap. Sweat solder kit and high back pressure vacuum breaker also included. 0.5 gpf / 1.9 Lpf flush valve shall be American Standard Model # 6063.051.002. © 2018 AS America Inc. 4/19 SELECTRONIC® SENSOR-OPERATED URINAL FLUSH VALVE, 0.5 GPF BATTERY POWERED LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant Roughing-in Dimensions 72 mm FINISHED WALL (2-7/8") 57 mm (2-1/4" MIN.) 15˚ 114 mm (4-1/2") DETECTION ZONE 400 mm-800 mm (15-3/4" TO 31-1/2") MANUAL OVERRIDE BUTTON SUPPLY DN 25 mm *CRITICAL (3/4" I.P. S.) LEVEL -C-L- 108 mm-134 mm 406 mm (4-1/4" TO 5-1/4") (16") 292 mm (11-1/2") FOR 3/4" TOP SPUD FIXTURES *Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6" (152mm) above fixture. Consult Codes for details. Right or Left Hand Installation MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES © 2018 AS America Inc. 4/16.
Load more

Recommended publications
  • ENVIRONMENTAL PRODUCT DECLARATION As Per /ISO 14025/ and /EN 15804
    ENVIRONMENTAL PRODUCT DECLARATION as per /ISO 14025/ and /EN 15804/ Owner of the Declaration Programme holder Institut Bauen und Umwelt e.V. (IBU) Publisher Institut Bauen und Umwelt e.V. (IBU) Declaration number EPD-ECZ-20180068-CAC1-EN Issue date 25.07.2018 Valid to 24.07.2023 Vitreous China Ceramic Sanitaryware Eczacıbaşı Building Products Co. www.ibu-epd.com / https://epd-online.com General Information Eczacıbaşı Building Products Co. Vitreous China Ceramic Sanitaryware Programme holder Owner of the declaration IBU - Institut Bauen und Umwelt e.V. Eczacıbaşı Building Products Co. Panoramastr. 1 Buyukdere Cad. Ali Kaya sk.,No.7 10178 Berlin Levent,İstanbul, Turkey Germany Declaration number Declared product / declared unit EPD-ECZ-20180068-CAC1-EN Vitreous China Ceramic Sanitaryware / 1 t This declaration is based on the product Scope: category rules: Within this study a life cycle analysis according to ISO Sanitary ceramics, 07.2014 14040/44 is performed for vitreous china ceramic (PCR checked and approved by the SVR) sanitary ware products manufactured by Eczacıbaşı Building Products Co. at the production plant located in Issue date Bozüyük/Bilecik/TURKEY. The life cycle analysis is based on the data declared by Eczacıbaşı Building 25.07.2018 Products Co. The EPD for vitreous china ceramic sanitaryware products is an average EPD which Valid to represents the life cycle analysis of the vitreous 24.07.2023 china product group. This analysis relies on transparent, plausible and documented basis data. All the model assumptions which influence the results are declared. The life cycle analysis is representative for the products introduced in the declaration for the given system boundaries.
    [Show full text]
  • A Room with a Bath
    Rochester Institute of Technology RIT Scholar Works Theses 11-20-1997 A Room with a bath Joel Urruty Follow this and additional works at: https://scholarworks.rit.edu/theses Recommended Citation Urruty, Joel, "A Room with a bath" (1997). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. ROCHESTER INSTITUTE OF TECHNOLOGY A Thesis Submitted to the Faculty of The College of Fine and Applied Arts in Candidacy for the Degree of MASTER OF FINE ARTS A Room With a Bath by Joel Urruty November 20, 1997 College of Imaging Arts & Sciences School of American Crafts Approvals Chief Advisor: Richard Tannen Associate Advisor: Doug Sigler Date ( Z I I z/9v Associate Advisor: Robert Leverich Date n/iJ-L-9=-B- Associate Advisor: Robert Heischmann Date /.?- -7'- 20 I Chairperson: Richard Tannen Date---+--¥-_I---J.-__ I, Joel Urruty, hereby grant permission to the Wallace Library of RIT to reproduce my thesis in whole or in part. Any reproduction will not be for commercial use or profit. Signature rr pate-ll /°7 fieri CONTENTS LIST OF PLATES 1 I INTRODUCTION 2 II HISTORY 4 III ORNAMENT 9 IV DESIGN 12 -AESTHETIC CONSIDERATIONS 14 -TECHNICAL CONSIDERATIONS 19 V CONCLUSION 24 ENDNOTES 32 BIBLIOGRAHY 33 LIST OF PLATES 1. Sink p. 26 2. Medicine Cabinet p. 27 3. Medicine Cabinet (detail) p. 28 4. Hamper p.
    [Show full text]
  • Public Washroom Design and Technical Guidelines
    PUBLIC WASHROOM DESIGN & TECHNICAL GUIDELINES REAL ESTATE AND FACILITIES MANAGEMENT FACILITY PLANNING AND DEVELOPMENT Issued: Version 1 - January 31st, 2018 REAL ESTATE AND FACILITIES MANAGEMENT Facility Planning and Development PUBLIC WASHROOM DESIGN & TECHNICAL GUIDELINES TABLE OF CONTENTS INTRODUCTION .......................................................................................................................................... 1 1.0 DESIGN GUIDELINES .................................................................................................................... 1 1.1 SCOPE OF DESIGN GUIDELINES ............................................................................ 1 1.2 SAFETY CONSIDERATIONS .................................................................................. 1 1.3 EQUITY OF ACCESS .......................................................................................... 2 1.5 SITING AND SITE ACCESS ................................................................................... 3 1.6 BUILDING DESIGN: SIZE AND CONFIGURATION ......................................................... 3 1.7 DURABILITY, EASE AND ECONOMY OF MAINTENANCE .................................................. 3 1.8 DISCLAIMERS ................................................................................................. 4 2.0 TECHNICAL GUIDELINES ............................................................................................................. 5 2.1 GENERAL REQUIREMENTS .................................................................................
    [Show full text]
  • An Informative Guide To: Hospital Washroom Requirements
    CI/SfB (74) November 2010 Armitage Shanks Armitage Rugeley Staffordshire WS15 4BT Tel 01543 490253 hospital Fax 01543 491677 www.thebluebook.co.uk solutions... what works and why an informative guide to: hospital washroom requirements the essential specifiers series If you would like to request the Schools, Brassware, Part M or Office brochures from our ‘Essential Specifiers Series’, call 0800 590311 In 1817 Thomas Bond founded the company that would become Armitage Shanks with a simple objective; to produce sanitary ware of exceptional quality. Over the last 190 years, investment in technology and traditional manufacturing skills has remained at the core of the business. your questions Armitage Shanks has a history of innovation, a tradition of product development and a commitment to sustainable design. These factors manifest in a comprehensive product range that is a ‘one stop shop’ for the specifier. answered... Part of the Essential Specifiers Series, a collection that will make the process of selecting the right product much simpler, this guide provides the information needed to ensure you meet the needs of your client and current legislation. As the market leader Armitage Shanks believes it has a responsibility to the definitive help define the modern washroom. For almost two centuries it has literally set the standard. guide to hospital requirements where, who, when, what... The specification of sanitaryware and Over many years Armitage Shanks Contents fittings for healthcare use can be a life has designed and refined products or death decision. Literally. specific to the healthcare market, most Information notably the Contour range, a stylish – Scale of provision (02) The resurgent problem of cross-infection product that has excellent hygiene – Infection control (08) in hospitals has the attention of the media, properties due to its smooth organic – Durability and hygiene (12) patients and of course the Hospital shape and functionality.
    [Show full text]
  • PLUMBING DICTIONARY Sixth Edition
    as to produce smooth threads. 2. An oil or oily preparation used as a cutting fluid espe cially a water-soluble oil (such as a mineral oil containing- a fatty oil) Cut Grooving (cut groov-ing) the process of machining away material, providing a groove into a pipe to allow for a mechani cal coupling to be installed.This process was invented by Victau - lic Corp. in 1925. Cut Grooving is designed for stanard weight- ceives or heavier wall thickness pipe. tetrafluoroethylene (tet-ra-- theseveral lower variouslyterminal, whichshaped re or decalescensecryolite (de-ca-les-cen- ming and flood consisting(cry-o-lite) of sodium-alumi earthfluo-ro-eth-yl-ene) by alternately dam a colorless, thegrooved vapors tools. from 4. anonpressure tool used by se) a decrease in temperaturea mineral nonflammable gas used in mak- metalworkers to shape material thatnum occurs fluoride. while Usedheating for soldermet- ing a stream. See STANK. or the pressure sterilizers, and - spannering heat resistantwrench and(span-ner acid re - conductsto a desired the form vapors. 5. a tooldirectly used al ingthrough copper a rangeand inalloys which when a mixed with phosphoric acid.- wrench)sistant plastics 1. one ofsuch various as teflon. tools to setthe theouter teeth air. of Sometimesaatmosphere circular or exhaust vent. See change in a structure occurs. Also used for soldering alumi forAbbr. tightening, T.F.E. or loosening,chiefly Brit.: orcalled band vapor, saw. steam,6. a tool used to degree of hazard (de-gree stench trap (stench trap) num bronze when mixed with nutsthermal and bolts.expansion 2. (water) straightenLOCAL VENT.
    [Show full text]
  • How-To-Buy Guide for Toilets
    Bathrooms, they’re what life’s made of How-To-Buy Guide for Toilets By Gray Uhl Brand Education Director American Standard Welcome to the How-to-Buy Guide for Toilets We all know how much usage the toilet receives on a daily basis in our homes, workplace and everywhere else we visit. The toilet is a crucial element for our overall health and the health of our world. Strong flushing performance is key to our overall toilet satisfaction. A "plunger-free" toilet experience is the ultimate goal. American Standard delivers this high performance with toilets that are engineered not to clog, all in a breadth of styles to fit any bathroom decor ranging from traditional to transitional to modern. We can help you select the right toilet for you and your family. Click on the topics below to navigate to a specific subject: How toilets flush: siphonic vs. washdown operation – page 2 Determine the rough-in measurement – page 3 Flush valve size and trapway/outlet diameter – pages 4-5 Champion and Cadet toilet flushing performance – page 4-6 Maximum flushing performance (MaP) grading – page 5 Standard vs. high efficiency toilet flow rates – page 6 How dual flush toilets work – page 6 Water efficient toilets that are WaterSense-certified – page 7 One piece vs. two piece toilets – page 7 Bowl shape: elongated, round front or compact – page 7 Bowl height: standard (15") vs. Right Height (16-1/2") – page 8 EverClean finish for easier cleaning – page 8 Slow close seat: no noise, no pinches – page 9 No Tools installation of Champion MAX toilet – page 9 Basic, better and best toilet models – page 10 Once you've made your selection and installed your brand new toilet, we'd love to see the finished result.
    [Show full text]
  • The Restoration of Late Nineteenth-Century Bathrooms: a Two Part Study
    University of Pennsylvania ScholarlyCommons Theses (Historic Preservation) Graduate Program in Historic Preservation 1992 The Restoration of Late Nineteenth-Century Bathrooms: A Two Part Study Paula Joan Sagerman University of Pennsylvania Follow this and additional works at: https://repository.upenn.edu/hp_theses Part of the Historic Preservation and Conservation Commons Sagerman, Paula Joan, "The Restoration of Late Nineteenth-Century Bathrooms: A Two Part Study" (1992). Theses (Historic Preservation). 256. https://repository.upenn.edu/hp_theses/256 Copyright note: Penn School of Design permits distribution and display of this student work by University of Pennsylvania Libraries. Suggested Citation: Sagerman, Paula Joan (1992). The Restoration of Late Nineteenth-Century Bathrooms: A Two Part Study. (Masters Thesis). University of Pennsylvania, Philadelphia, PA. This paper is posted at ScholarlyCommons. https://repository.upenn.edu/hp_theses/256 For more information, please contact [email protected]. The Restoration of Late Nineteenth-Century Bathrooms: A Two Part Study Disciplines Historic Preservation and Conservation Comments Copyright note: Penn School of Design permits distribution and display of this student work by University of Pennsylvania Libraries. Suggested Citation: Sagerman, Paula Joan (1992). The Restoration of Late Nineteenth-Century Bathrooms: A Two Part Study. (Masters Thesis). University of Pennsylvania, Philadelphia, PA. This thesis or dissertation is available at ScholarlyCommons: https://repository.upenn.edu/hp_theses/256
    [Show full text]
  • Dirty Furniture, Toilet, 2016
    A Piss-Poor Performance What does it take to design a truly gender-neutral toilet? With debates raging across the US, artist Alex Schweder stands up for women who do the same. Photo by Sander de Wilde © Corbis via Getty Images 98Two gayDirty men Furniture dressed as women pee against a wall during the Belgian Pride Parade, 2013 Gender 99 As part of this practice, I meet with p eople in my studio for an hour-long conversation about their homes. The success of this discursive branch of what I call performance architecture has led me to establish SOAP (Schweder’s Offi ce for Architectural Performances). The above exchange occurred when Heike and Bill came to me with a specifi c renovation in mind. From the altercation, it is clear that the toilet – and the way men and women use it – is a fl ashpoint and site of struggle for both our gender identity and also the way women and men relate to one another. Human beings have designed this thing – the toilet – a place where our corporeal interior is externalised, where our bodies become not our bodies. Yet at or on the toilet we are more than just animals that stand or sit. Of course, whether we choose to stand or sit is not engrained but learned. ‘One is not born, but rather becomes, a woman,’ Simone de Beauvoir famously declared in The Second Sex (1973). The psychoanalyst Jacques Lacan also saw gender differences as Let’s begin with married couple Heike and Bill (not their real illusory. For him, the segregation of men’s and women’s restrooms names) who are German and American respectively.
    [Show full text]
  • SECTION 224300 - HEALTHCARE PLUMBING FIXTURES (Patient Care Areas) All Other Areas Refer to 22400- Plumbing Fixtures
    UNIVERSITY OF ROCHESTER DESIGN STANDARD JANUARY 2010 SECTION 224300 - HEALTHCARE PLUMBING FIXTURES (Patient Care Areas) All other areas refer to 22400- Plumbing Fixtures 1.1 QUALITY ASSURANCE A. Regulatory Requirements: IPC Plumbing Code of New York State B. Quality Standard: NSF 61 for fixture materials in contact with potable water. C. Quality Standard for Electrical Components, Devices, and Accessories: NFPA 70, Article 100. 1.2 FAUCETS A. Approved Manufacturer’s for Lavatory Faucets: 1. Chicago Faucets 2. Symmons Faucets 3. Speakman Faucets 4. T&S Brass Faucets 5. Bladley Faucets 6. American Standards B. Lavatory Faucets: 1. Faucet for lavatory-type medical plumbing fixture. a. Maximum Flow Rate: 2.2 gpm b. Body Material: Solid brass c. Finish: Polished chrome plate d. Type: Single-control mixing, two-handle mixing e. Tempering System: Not required f. Mounting: Deck; exposed, Deck; concealed g. Handle(s): Single-lever, Wrist blade, 4 inches h. Spout: Rigid, Swing, Rigid gooseneck, Swivel gooseneck i. Spout Outlet: Laminar flow j. Operation: Noncompression, manual k. Drain: Grid Strainer C. Approved Manufacturer’s for Shower Faucets: 1. Powers Hydro- Guard T/P 2. Sloan Co. 3. Symmons Co. 4. T&S Brass Co. 5. Bradley Co. D. Shower Faucets: 1. Faucet for shower-type medical plumbing fixture. HEALTHCARE PLUMBING FIXTURES 224300 01/2010 Page 1 FINAL UNIVERSITY OF ROCHESTER DESIGN STANDARD JANUARY 2010 a. Maximum Flow Rate: 2.5 gpm b. Body Material: Solid brass c. Finish: Polished chrome plate d. Type: Thermostatis, Pressure balance, Thermostatic and pressure balance e. Mounting: Concealed f. Handle(s): Single-lever, touch pad g.
    [Show full text]
  • ASME A112.19.19 “Vitreous China Nonwater Urinals”
    Summary of Substantive Changes between the 2006 (R2011) and 2016 editions of ASME A112.19.19 “Vitreous China Nonwater Urinals” Presented to the IAPMO Standards Review Committee on December 12, 2016 General: Changes to this standard should not affect currently listed products but instead the changes now address nonwater urinal products that have a drain-cleansing feature option that are currently addressed by IGC 311-2015 ‘Hybrid Urinals with High-Efficiency Drain-Cleansing Feature,’ which will now be superseded by ASME A112.19.19-2016. The changes to ASME A112.19.19 are as follows: Scope Section 1.1 was revised to include address of nonwater urinal products with a drain-cleansing feature option. Standards reference Section 1.3 was updated to include pertinent new standards related to backflow protection. New definitions added in Section 1.4, to define the processes of ‘drain-cleansing action’ and ‘urinal with drain‐cleansing action.’ Subsections of Section 2, Section 3 and Section 5 were updated with current standards designations. The joint seal pressure test was reduced from 15 psig to 5 psig in Section 5.7. New Section 6.6 was added to specify the ‘drain-cleansing action’ test procedure to nonwater urinals having this feature. 1.1 Scope This Standard establishes requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china nonwater urinals, including those with an optional drain-cleansing feature as defined in this Standard. The sanitary performance requirements and test procedures apply to all types of nonwater urinals that discharge into gravity waste systems in permanent buildings and structures independent of occupancy.
    [Show full text]
  • The National Guidelines for Water, Sanitation and Hygiene in Health Care Facilities
    THE NATIONAL GUIDELINES FOR WATER, SANITATION AND HYGIENE IN HEALTH CARE FACILITIES THE UNITED REPUBLIC OF TANZANIA MINISTRY OF HEALTH, COMMUNITY DEVELOPMENT, GENDER, ELDERLY AND CHILDREN THE NATIONAL GUIDELINES FOR WATER, SANITATION AND HYGIENE IN HEALTH CARE FACILITIES OCTOBER, 2017 MINISTRY OF HEALTH, COMMUNITY DEVELOPMENT, GENDER, ELDERLY AND CHILDREN TABLE OF CONTENTS TABLE OF CONTENTS ..........................................................................................................................I LIST OF TABLES ..................................................................................................................................VI LIST OF FIGURES ............................................................................................................................VIII FOREWORD ........................................................................................................................................IX ACKNOWLEDGEMENTS ................................................................................................................... X ABBREVIATIONS AND ACRONYMS ..............................................................................................XI GLOSSARY ...................................................................................................................................... XV CHAPTER ONE ...................................................................................................................................... 1 1.0 INTRODUCTION........................................................................................................................
    [Show full text]
  • For Immediate Release TOTO Introduces the MH Connect+ Wall
    For Immediate Release For more information contact: Lenora Campos, Ph.D. 917.237.0665 x3104 [email protected] Brittani Kaim 212.704.8144 $rittani.kaim @e&elman.com TOTO Introduces the MH Connect+ Wall-Mount Toilet and Washlet New MH Connect+ Wall-Hung Dual-Flush Toilet and D-Shaped Washlet Combination Offers an !legant, Seamless Look (Morrow, GA) January 10, 2017 — ()() expan&s !ts l!ne o* Connect+ h!,h-e*.ciency to!lets an& Washlet com$!nat!ons 1!th !ts ne1 23 Connect+ 1all-mount h!,h-e*.ciency &ual 4ush to!let an& D-shape& Washlet. (h!s ne1 a&&!t!on to ()()5s popular Connect+ l!ne com$!nes po1er*ul Dual- 2ax 3D (orna&o 4ush!n, per*ormance 1!th an ele,ant appearance—mo&ern, clean, simple, an& t!meless. (he Water6ense la$elle& 23 Connect+ h!,h-e*.ciency to!let 738(9 an& Washlet pa!r :o!n ()()5s ne1 23 an& popular 2ar!s an& ;<u!a 1all-hun,, &ual-4ush mo&els. Connect+ Line Dur!n, the manu*actur!n, process, ()()5s Connect+ l!ne o* h!,h- e*.ciency to!lets are pre-&r!lle& 1!th a hole locate& near the seat $olt holes at the $ack o* the to!let5s $o1l, 1h!ch ena$les the Washlet5s po1er cor& an& 1ater hose to pass throu,h easily. (he speciall/-&esi,ne& Connect+ Washlets' electr!cal connect!on an& 1ater supply are &esi,ne& to pa!r seamlessly 1!th the ne1 conceale& connect!on to!lets.
    [Show full text]