DOCSLIB.ORG

SKIL Miter Saws Provide Needed Support and Superior Power

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SKIL Miter Saws Provide Needed Support and Superior Power CATALOG 2013 POWER TOOLS AND ACCESSSORIES The Innovations That Built America 1921 1924 1928 1937 Mechanized Edmond Michel & The Model E SKILSAW® The Model 77 SKILSAW® is Machette Joseph Sullivan is developed as the first saw introduced into the market; "World's First founded the with a die-cast motor housing becoming the benchmark of all Small Electric "Michel Electric to reduce weight and portable electric circular saws. Handsaw" is Handsaw increase durability. invented by Company" Edmond Michel as a way to improve the speed of harvesting sugar cane. 1943 1956 SKIL® is awarded the coveted Army/Navy The Vari-Torque clutch is "E" for Excellence in War Production for the added on circular saws to Model 2127 pneumatic12 in. SKILSAW®, help prevent kick-back, which is found in every war zone and within providing greater all branches of the service. operator protection. 1938 1949 1959 First pneumatic SKIL® ventures into the The portable 12 in. SKILSAW® consumer (DIY) eld with Roto Hammer is the rst is produced for the introduction of a of its kind to have the ability special applications. 6 in. SKILSAW® and to drill holes in concrete. The a 1/4 in. SKIL drill. Roto Hammer quickly becomes a SKIL® introduces standard tool in the kit of professionals the Model 100 Planer. working around concrete. Because of The SKIL Planer would the greater use of concrete in Europe, be trusted and used by the Roto Hammer nds an especially surfers all over the world active market overseas. because of its abilities and precision. 1976 1991 SKIL® invents SKIL® adds a the first 60 degree bevel self-contained to the Worm Drive cordless drill. SKILSAW® 1966 1985 1988 2005 The Drive-R-Drill, a combination of The invention of the SKIL® TwistTM The SKIL® Top GunTM SKIL® launches the XShopTM a power drill and screwdriver Cordless Screwdriver makes it is the first cordless 12V Benchtop System and iXOTM featuring adjustable the first in-line battery-powered Drill/Driver to be offered to 3.6V lithium ion Trigger Speed Control, is screwdriver. the professional market place. screwdriver in introduced to the market. It features variable speed the U.S. The reversing, dual gearing ratios, iXO becomes SKIL® produces its five-position clutch adjustment, an instant success with its Ten Millionth power tool. industrial quality chuck and compact size & long battery life. detachable energy packs which recharge in 1 hour. 2008 SKIL® introduces Pressure Control Technology in ¼ Sheet Sander 2007 2008 2010 2012 SKIL® introduces the XBenchTM SKIL® releases the SKIL® creates a new power tool SKIL® celebrates its portable workstation. Power CutterTM, category with the launch of the 75th Anniversary of the a lithium ion compact Flooring Saw. This is the first saw Model 77 Worm Drive multi-cutting tool. that has the capacity to cut hardwood, SKILSAW® laminate and engineered flooring. with a limited-edition saw and custom chopper designed and built by Paul Jr Designs. The Innovations That Built America TABLE OF CONTENTS CORDLESS 4 BENCHTOP 39 1921 1924 1928 1937 18V 5-6 Miter Saws 40-41 Mechanized Edmond Michel & The Model E SKILSAW® The Model 77 SKILSAW® is Machette Joseph Sullivan is developed as the first saw introduced into the market; Bare Tools 7-8 Table Saws 42 "World's First founded the with a die-cast motor housing becoming the benchmark of all Combo Kits 9-10 Band Saw 42 Small Electric "Michel Electric to reduce weight and portable electric circular saws. Handsaw" is Handsaw increase durability. 14.4V 11 Bench Grinder 43 invented by Company" Edmond Michel as a way 12V & Under 11-14 Belt/ Disc Sander 43 to improve the speed of harvesting sugar cane. Screwdriving 15 Scroll Saw 43 Drill Press 44 CORDED 16 Miter Saw Stand 44 1943 1956 SKIL® is awarded the coveted Army/Navy The Vari-Torque clutch is Drills 17-18 "E" for Excellence in War Production for the added on circular saws to Model 2127 pneumatic12 in. SKILSAW®, help prevent kick-back, which is found in every war zone and within providing greater LEVELING AND all branches of the service. operator protection. CUTTING 19 ALIGNMENT 45-46 1938 1949 1959 SKILSAWS® 20-25 First pneumatic SKIL® ventures into the The portable 12 in. SKILSAW® consumer (DIY) eld with Roto Hammer is the rst Jig Saws 26 ACCESSORIES 47 is produced for the introduction of a of its kind to have the ability special applications. 6 in. SKILSAW® and to drill holes in concrete. The Reciprocating Saws 27-28 Batteries/Chargers 48 a 1/4 in. SKIL drill. Roto Hammer quickly becomes a SKIL® introduces standard tool in the kit of professionals Oscillating 28 Circular Saw Blades 49-50 the Model 100 Planer. working around concrete. Because of The SKIL Planer would the greater use of concrete in Europe, Flooring Saw Blades 37, 50 be trusted and used by the Roto Hammer nds an especially GRINDING 29 surfers all over the world active market overseas. Drilling/Driving 51-53 because of its abilities and precision. Grinders 30 Jig Saw Blades 54 1976 1991 Reciprocating Saw Blades 55 SKIL® invents SKIL® adds a the first 60 degree bevel WOODWORKING 31 Hole Saws 55 self-contained to the Worm Drive cordless drill. SKILSAW® Routers 32-33 Sanding 56 1966 1988 2005 Router Tables 33 Scroll & Band Saw Blades 56 1985 Sanders 34-35 The Drive-R-Drill, a combination of The invention of the SKIL® TwistTM The SKIL® Top GunTM SKIL® launches the XShopTM Router Bits 57-58 a power drill and screwdriver Cordless Screwdriver makes it is the first cordless 12V Benchtop System and iXOTM Planer 35 featuring adjustable the first in-line battery-powered Drill/Driver to be offered to 3.6V lithium ion Abrasives 59 Trigger Speed Control, is screwdriver. the professional market place. screwdriver in introduced to the market. It features variable speed the U.S. The reversing, dual gearing ratios, iXO becomes FLOORING 36 SKIL® produces its five-position clutch adjustment, an instant success with its Ten Millionth power tool. industrial quality chuck and compact size & long battery life. Flooring Saw 37 detachable energy packs which recharge in 1 hour. Tile Saws 38 In 1924, the first Model E portable electric handsaw was invented by 2008 SKIL® introduces Edmond Michel, a co-founder of what later became known as SKIL Corporation. Pressure Control The introduction of the Model 77 Skilsaw® in 1937 became a benchmark of Technology in ¼ Sheet Sander portable electric circular saws and continues to be, even today. Since then, SKIL has become one of the most recognized and powerful brands in the power 2007 2008 2010 2012 tool industry. From circular saws and jig saws to sanders and drills, SKIL power tools are engineered to deliver the high-performance and durability that today’s SKIL® introduces the XBenchTM SKIL® releases the SKIL® creates a new power tool SKIL® celebrates its portable workstation. Power CutterTM, category with the launch of the 75th Anniversary of the growing population of Do-It-Yourselfers demand. a lithium ion compact Flooring Saw. This is the first saw Model 77 Worm Drive multi-cutting tool. that has the capacity to cut hardwood, SKILSAW® For project ideas and tips: www.skiltools.com laminate and engineered flooring. with a limited-edition saw Follow us on... and custom chopper designed and built by Paul Jr Designs. 1-877-SKIL-999 ©2013 ROBERT BOSCH TOOL CORPORATION. ALL RIGHTS RESERVED. SKIL® AND SKILSAW® ARE REGISTERED TRADEMARKS OF THE ROBERT BOSCH TOOL CORPORATION. For project ideas and tips: www.skiltools.com 3 CORDLESS 4 CORDLESS DRILLS THAT DRIVE PROJECT SUCCESS * 2898LI-02 18V 1/2 in. 2-Speed Drill/Driver Features Specifications • Select System™ Voltage 18V Lithium Ion and Ni-Cd battery compatible No Load RPM/Min 0-450/0-1,400 Chuck Size 1/2 in. Keyless • Powerful 2-Speed Gearbox Weight (lbs.) 8.0 For high speed drilling and high torque applications • All Metal Geartrain Delivers 400 in.-lbs. of torque Includes Battery SB18B-LI • 20+1 Position Clutch Charger* SC118B-LI For precise drilling and driving Double-Ended Bit N/A • 1/2 in. Keyless Chuck Carrying Bag N/A For fast and easy bit changes *-04 version includes: 2 Batteries • On-Tool Bit Storage Conveniently stores bits • Side-Assist Handle For more control • Lithium Ion Power Holds a charge up to 18 months, ready to use when you need it Carrying Bag Included * 2888-03 18V 1/2 in. 2-Speed Drill/Driver Features Specifications • Select System™ Voltage 18V Lithium Ion and Ni-Cd battery compatible No Load RPM/Min 0-400/0-1,250 Chuck Size 1/2 in. Keyless • Powerful 2-Speed Gearbox Weight (lbs.) 11.4 For high speed drilling and high torque applications • 25+1 Position Clutch Includes For precise drilling and driving 2 Batteries SB18A Charger SC118 • Variable Speed Trigger Double-Ended Bit N/A Lets you control drilling speed when precision Carrying Bag N/A matters most *-02 version also includes: • 1/2 in. Keyless Chuck 2897 Pivoting Head Flashlight For fast and easy bit changes • On-Tool Bit Storage Conveniently stores bits • 2 Batteries Included Delivers double the run time Carrying Bag Included For project ideas andFor projecttips: www.skiltools.com ideas and tips: www.skiltools.com 5 CORDLESS | 18V DRILL/DRIVERS * 2860-03 18V 3/8 in. Drill/Driver Features Specifications • Select System™ Voltage 18V Lithium Ion and Ni-Cd battery compatible No Load RPM/Min 0-700 Chuck Size 3/8 in. Keyless • 15+1 Position Clutch Weight (lbs.) 8.0 For precise drilling and driving • Variable Speed Trigger Includes Lets you control drilling speed when precision Battery SB18C matters most Charger SC118C Double-Ended Bit N/A • 3/8 in.
Load more

Recommended publications
  • MITER SAW SAFETY (Reviewed 9/27/2007)
    MITER SAW SAFETY (Reviewed 9/27/2007) 1. Tool Use and Care • Use clamps or other practical way to secure and support the work piece to a stable platform. Holding the work by hand or against you body is unstable. It allows for work to shift, causes binding of the tool and loss of control. • Do not force tool. Use correct tool for you application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool for purposes not intended – for example; do not use the miter saw for slicing meat. • Do not use tool if switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is dangerous. • Disconnect the plug from the power source before making any adjustments for changing accessories. Such prevention safety measures reduce the risk of starting the tool accidentally. • Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges, are less likely to bind and easier to control. When mounting saw blades be certain that the arrow on the blade matches the direction of the arrow marked on the tool and that the teeth are also pointing in the same direction. • Inspect guards before using. Keep guards in place. Check moving parts for binding or any other condition that may affect the normal operation of safety features of the tool. If damaged, have tool serviced before using the tool. Many accidents are caused by poorly maintained tools. • Do not alter or misuse tool.
    [Show full text]
  • LS1219 / LS1219L Slide Compound Miter
    Satisfy Professional's Needs Max. cutting capacity (height x width) Slide Compound Miter Saw LS1219 / LS1219L 305mm (12") Cross Cut Miter Cut (left & right) Bevel Cut (left & right) Compound Cut Crown Baseboard molding, (Skirt board) 45 degree 90o type 90o 45o 45o 45o 90o 90o 45o Bevel Miter Bevel Miter Single sliding system Bevel 45o 61 x 268 left (2-3/8” x 10-1/2”) 92 x 268 61 x 382 enables smooth o o 45 (3-5/8”x10-1/2”) 45 (2-3/8” x 15” ) Upright cutting Upright cutting left/ 107 x 255 left 71 x 363 Miter 71 x 255 203 (8”) 171 (6-3/4”) right (4-1/4” x 10”) (2-13/16” x 14-1/4”) o 45 (2-13/16” x 10”) operation to produce 92 x 382 left/ (3-5/8” x 15”) right 107 x 363 Bevel superior cuts (4-1/4” x 14-1/4”) o 44 x 268 45 (1-3/4” x 10-1/2”) 92 x 185 44 x 382 right o o 60 (3-5/8” x 7-1/4”) 45 (1-3/4” x 15” ) Horizontal cutting Horizontal cutting left/ 107 x 178 right 54 x 363 Miter o right (4-1/4” 7”) (2-1/8” x 14-1/4”) 45 54 x 255 320 (12-5/8”) 416 (16-3/8”) left/ (2-1/8” x 10”) right (mm) Accessories Vertical vise assembly Dust bag assembly Stand Part No. 126617-2 Part No. 122852-0 Part No. WST06 Horizontal vise assembly Part No.
    [Show full text]
  • 10˝ Dual Speed Sliding Compound Miter Saw
    10˝ DUAL SPEED SLIDING COMPOUND MITER SAW LISTED E493385 For replacement parts visit Model # 70730 WENPRODUCTS.COM bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us at: 800-232-1195 (M-F 8AM-5PM CST) [email protected] WENPRODUCTS.COM TABLE OF CONTENTS Technical Data 2 Introduction 3 General Safety Rules 4 Specific Rules For the Miter Saw 6 Electrical Information 9 Unpacking and Transporting 10 Know your Miter Saw 10 Assembly and Adjustments 12 Operation 19 Maintenance 22 Exploded View & Parts List 23 Warranty 26 TECHNICAL DATA Model Number: 70730 Motor: 120 V, 60 Hz, 15A No-Load Speed: Speed 1: 2000 RPM Speed 2: 4500 RPM Blade Model Number: 70730-002 Blade Size: 10˝ TCT Multi-Purpose Blade Arbor Size: 5/8 in. Arbor Number of Teeth: 48 Teeth Miter Table Angles: 0° to 45° Left & Right Bevel Cut Angles: 0° to 45° Left Only Cutting Capacity: 0° Miter, 0° Bevel: 12 by 3-1/2 in. 45° Miter, 0° Bevel: 8-1/2 by 3-1/2 in. 0° Miter, 45° Bevel: 12 by 1-7/8 in. 45° Miter, 45° Bevel: 8-1/2 by 1-7/8 in.
    [Show full text]
  • Compound Sliding Miter Saw About
    Compound Sliding Miter Saw About Miter saws are saws designed to perform quick accurate crosscuts in materials such as wood and some plastics. The tool shop miter saw is a dual action compound sliding miter saw. This means that it is capable a large cuts up to 4 inches by 12 inches nominal size. The compound feature of the saw allows both miter and bevel cuts to be made at the same time. Miter adjustments are from 50 degrees to the left of square and 60 degrees to the right of square. Bevel adjustments are 45 degrees in either direction of the vertical position. Class Goal The goal of this class is to allow students to become certified safe operators of the tool shop miter saw. This handout along with hands on training will provide the information needed to operate the miter saw in a safe and efficient manner. You must successfully pass both the hands on training and quiz to become fully certified. SAFETY! Shop Safety: • Remember to always wear closed two shoes in the shop area at ALL times. • Always make sure to have long hair tied back and loose clothing secured. • Never leave a machine running unattended. They can have a mind of their own sometimes. • Never interrupt someone while they are using a piece of equipment. • Always report any incident to the shop supervisor immediately. • Check in with the shop supervisor before using any equipment in the tool shop. • Never attempt to repair or modify any equipment. • Always cleanup work area and return tools to their proper locations when finished.
    [Show full text]
  • Operator's Manual
    OPERATOR’S MANUAL 10 in. Compound Miter Saw TS1345L - Double Insulated 31.6 22.5 22.5 31.6 Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction ..................................................................................................................................................................... 2 Warranty .......................................................................................................................................................................... 2 General Safety Rules ....................................................................................................................................................3-4 Specific Safety Rules ....................................................................................................................................................4-5 Symbols ........................................................................................................................................................................... 6 Electrical .........................................................................................................................................................................
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Ana White Workbench for Ryobi Page 1 of 22 Tools • Miter Saw •
    Ana White Workbench for Ryobi Page 1 of 22 Tools • Miter Saw • Drill with drill bits • Pneumatic Stapler • Tape Measure • Square • Table Saw • Clamps Shopping List • 4 Sheets of 3/4” plywood • 2 sheets of 1/4" plywood • 8 – 3” casters with brakes • 3/4” screws for attaching caster wheels • 11 – 2x4 @ 8 feet long • 8 – 1x2 @ 8 feet long • 3” self tapping wood screws • 2” and 1-1/4” 18 gauge staples • 4 handles for carts Ana White Workbench for Ryobi Page 2 of 22 Workbench Cut List • 6 – 2x4 @ 49” • 4 – 2x4 @ 28” • 8 – 2x4 @ 39-1/2” • 2 – 1/4” plywood @ 39-1/2” x 31” (see plywood cutting diagrams) • 2 – 3/4” plywood @ 52-1/4” x 31” (see plywood cutting diagrams) • 4 – 2x4 @ 29-1/2” • 2 – 2x4 @ width of saw (shown at 24”) • 2 – 3/4” plywood @ width of saw x 31” (shown at 24”) Cart Cut List • 2 –3/4” plywood @ 48” x 30” (see plywood cutting diagrams) • 4 – 3/4” plywood @ 8-1/4” x 30” (cut from scraps, see plywood cutting diagrams) • 24 – 1x2 @ 28” • 8 – 3/4” plywood @ 8-1/4” x 28” (cut from scraps, see plywood cutting diagrams) • 4 – 1/4” plywood @ 30” x 28-3/4” • 4 – 3/4” plywood @ 48” x 29-1/2” (see plywood cutting diagrams) Ana White Workbench for Ryobi Page 3 of 22 Ana White Workbench for Ryobi Page 4 of 22 Workbench Step 1: Build Workbench Frames Attach using 3” wood screws and glue at corners. Check for square and adjust as needed.
    [Show full text]
  • Sliding Dual-Bevel Compound Miter Saw Model JMS-10X and JMS-12X
    Operating Instructions and Parts Manual Sliding Dual-Bevel Compound Miter Saw Model JMS-10X and JMS-12X JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-707210 Ph.: 800-274-6848 Edition 1 06/2019 www.jettools.com Copyright © 2019 JET 1 13. Keep safety guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately after completion of maintenance. 1.0 IMPORTANT SAFETY 14. Check damaged parts. Before further use of the machine, a guard or other part that is damaged INSTRUCTIONS should be carefully checked to determine that it WARNING – To reduce risk of injury: will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, 1.1 General machine safety warnings mounting and any other conditions that may 1. Read and understand the entire owner's affect its operation. A guard or other part that is manual before attempting assembly or damaged should be properly repaired or operation. replaced. 2. Read and understand the warnings posted on 15. Provide for adequate space surrounding work the machine and in this manual. Failure to area and non-glare, overhead lighting. comply with all of these warnings may cause 16. Keep the floor around the machine clean and serious injury. free of scrap material, oil and grease. 3. Replace warning labels if they become 17. Keep visitors a safe distance from the work obscured or removed. area. Keep children away. 4. This saw is designed and intended for use by 18.
    [Show full text]
  • Portable Miter Tile Saws
    The Bosch CM12SD 12- INDUSTRY inch compound miter saw INDUSTRY offers the greatest cutting capacity of any Bosch BOSCH saw — 14-inch crosscuts, While the industry awaits the 6 3/4-inch base against the arrival of the Bosch REAXX job fence and 6 1/2-inch crown molding at 45 degrees. UPDATE site table saw with flesh-detection UPDATE technology, (reports say it is com- Requested features include ing yet this year), Bosch has kept all-metal bevel locks that are busy improving other products in the convenient and easy to reach benchtop category, including miter and a side-lever that eliminates saws. The Bosch CM12SD 12-inch the need to reach behind the by Tom by Tom compound miter saw delivers with saw to make adjustments. The molding at 45 degrees,” Stevens by Tom easy adjustment, increased capacity Bosch-exclusive quick-select turret adds. The Bosch CM12SD is 24 and better material support. bevel detent system offers common inches wide when retracted and Hammel detents at 22.5, 33.9, 45 and 47 expands up to 39 inches. Hammel PORTABLE MITER “We built the Bosch CM12SD degrees and bevel and miter scales compound miter saw to the are scribed on all-metal faces for The up-front miter lock requires specifications of users,” says Jim easy legibility. a simple 1/3 turn to lock or unlock. Stevens, product manager, Robert The miter detent overrides with TILE SAWS Bosch Tool Corp. “They told us what “By increasing cutting capacity, the thumb action for easy and precise they wanted in a next-generation, Bosch CM12SD offers the greatest settings.
    [Show full text]
  • Power Tools Dependable Tools • Reliable Brand • Affordable Price
    Power Tool Catalog The Right Tool for the Right Project Power Tools Dependable Tools • Reliable Brand • Affordable Price Introducing Alltrade Trades Pro® power tools, a complete assortment of the most popular power tools with competitive features at affordable price points. Perfect for the basic maintenance projects value-conscious homeowners need to tackle from time-to-time. With an extensive range of cordless portable power tools, electric portable power tools and bench top tools, Alltrade Trades Pro® caters to every customer’s category requirements. The tools offer outstanding features, dependable quality and are backed by a solid warranty to ensure end-user satisfaction. Our high-impact packaging is attractive, informative and communicates brand reliability and value to the consumer. We are committed to delivering the very best value for the price. Alltrade Trades Pro® has what you need for sales success! 2 Cordless Power Tools 836777 836774 4.8 Volt 3-Position Cordless Screwdriver 14.4 Volt Cordless Drill/Driver • Handle locks in 3 positions • 3/8” keyless chuck, 16 position clutch • Built-in worklight, auto spindle lock • Variable speed trigger, electric brake • Includes 4 pc. 2” power bits • Includes battery and 5-8 hour charger UPC: 028907-340135 Case Qty: 10 Shelf Qty: 10 UPC: 028907-340104 Case Qty: 8 Shelf Qty: 8 836710 836840 18 Volt Cordless Drill/Driver 18 Volt Cordless Drill/Driver & Worklight • 3/8” keyless chuck, 16 position clutch • 3/8” keyless chuck, 16 position clutch • Variable speed trigger, electric brake • Variable speed trigger, electric brake • Includes battery and 5-8 hour charger • Includes worklight, battery and 5-8 hour charger UPC: 028907-338439 Case Qty: 8 Shelf Qty: 8 UPC: 28907-344065 Case Qty: 6 Shelf Qty: 6 836785 24 Volt Cordless Drill/Driver Kit • 3/8” keyless chuck, 25 position clutch • Variable speed trigger, electric brake • Includes battery, 5-8 hour charger, 13 pc.
    [Show full text]
  • Getting to Know Your Miter Saw
    BM 2610007877 04-10:BM 2610007877 04-10.qxp 4/26/10 8:13 AM Page 8 Getting To Know Your Miter Saw 2 3 30 7 1 1 31 4 29 28 5 27 6 26 25 8 24 23 9 8 10 22 9 11 15 21 20 19 18 17 16 14 13 12 To avoid injury from accidental 10. Kerf Inserts – Kerf inserts can be adjusted to ! WARNING starting, remove plug from power different blade widths to minimize workpiece source outlet before making any adjustments. tear-out. 1. Switch lock-Off Release Buttons – One of 11. Miter Detent Override – Allows detent action to these two buttons must be pressed before the be locked out, allowing for micro-adjustments to power switch can be pressed. any miter angle. 2. power Switch – The power switch used with the 12. Miter lock Knob – The miter lock knob locks the “Lock-OFF” button energizes the unit. miter saw table at any desired miter angle. 3. Main Handle – This handle contains the power 13. Miter Detent lever – The lever releases the switch. Pulling this handle down lowers the blade table from the detent. into the workpiece. 14. Bevel lock lever – The front-positioned bevel 4. lower Blade Guard/lower Guard lip – The lock lever locks the head assembly at the desired lower blade guard helps protect your hands from bevel angle. the spinning blade. It retracts as the blade is 15. Miter Scale/Miter pointer – The pointer rotates lowered. Lip can be used to raise the lower guard with the table and blade.
    [Show full text]
  • 12" Sliding Dual Bevel Compound Miter Saw Benchtop Series – Model No
    Operating Instructions and Parts Manual 12" Sliding Dual Bevel Compound Miter Saw Benchtop Series – Model No. JMS-12SCMS For serial no. 10070329 and higher JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-707120 Ph.: 800-274-6848 Revision B3 03/2017 www.jettools.com Copyright © 2017 JET Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product. (See chart below) • Accessories carry a limited warranty of one year from the date of receipt. • Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is Covered This warranty covers only the initial purchaser of the product from the date of delivery. What is Covered This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials outside recommended guidelines may void the warranty.
    [Show full text]