DOCSLIB.ORG

Portable Miter Tile Saws

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Portable Miter Tile Saws The Bosch CM12SD 12- INDUSTRY inch compound miter saw INDUSTRY offers the greatest cutting capacity of any Bosch BOSCH saw — 14-inch crosscuts, While the industry awaits the 6 3/4-inch base against the arrival of the Bosch REAXX job fence and 6 1/2-inch crown molding at 45 degrees. UPDATE site table saw with flesh-detection UPDATE technology, (reports say it is com- Requested features include ing yet this year), Bosch has kept all-metal bevel locks that are busy improving other products in the convenient and easy to reach benchtop category, including miter and a side-lever that eliminates saws. The Bosch CM12SD 12-inch the need to reach behind the by Tom by Tom compound miter saw delivers with saw to make adjustments. The molding at 45 degrees,” Stevens by Tom easy adjustment, increased capacity Bosch-exclusive quick-select turret adds. The Bosch CM12SD is 24 and better material support. bevel detent system offers common inches wide when retracted and Hammel detents at 22.5, 33.9, 45 and 47 expands up to 39 inches. Hammel PORTABLE MITER “We built the Bosch CM12SD degrees and bevel and miter scales compound miter saw to the are scribed on all-metal faces for The up-front miter lock requires specifications of users,” says Jim easy legibility. a simple 1/3 turn to lock or unlock. Stevens, product manager, Robert The miter detent overrides with TILE SAWS Bosch Tool Corp. “They told us what “By increasing cutting capacity, the thumb action for easy and precise they wanted in a next-generation, Bosch CM12SD offers the greatest settings. The saw miters 52 degrees best-in-class sliding compound cutting capacity of any Bosch saw left and 60 degrees right. An easily MASSIVE CUTTING CAPacities — miter. We’re a customer-focused with ranges from 3 1/2 x 14 inch adjustable and removable 4 3/4-inch company and this is a customer- (4x14) crosscut to 6 3/4 inch base fence supports material for accurate AND CORDLESS OPTIONS NOW TOO! focused tool.” against fence, plus 6 1/2-inch crown CONTINUED ON PAGE 70 ot many years ago, the 10-inch BEAST tile saws produce saws at a much better price,” Skaff idea of a cordless miter precise 22.5- and 45-degree bevel says. “And our BEAST10 tile saw saw would go over with cuts. Each saw is designed with a is bound to revolutionize the tile pro-users like a lead heavy-duty rail system engineered saw market. Lackmond backs the balloon. But as corded for exceptionally straight, accurate BEAST7 and BEAST10 saws with saws continue to pack and smooth cuts. three-year warranties.” Nin more power, capacity and accu- racy, cordless miter saws are gaining The BEAST7 weighs only 48 For smaller jobs, Lackmond’s respect on the job site. Who knew pounds and comes with an innova- BEAST5 handheld circular tile and — lead floats after all, and these tive snake pipe water nozzle which stone saw packs a 12-amp motor manufacturers are rewriting the rules. allows for precise water control and and can accept both standard and placement. The durable steel pipe concave blades. It can execute bevel The Professional Way To Drive Screws LACKMOND saw frame is constructed to with- cuts up to 45 degrees and can cut 1 www.ContractorSupplyMagazine.com www.ContractorSupplyMagazine.com www.ContractorSupplyMagazine.com “Lackmond’s 7- and 10-inch stand the toughest conditions. 1/4 inches deep at 90 degrees and Key benefits of our industry-leading Auto-Feed Screw BEAST tile saws, designed jointly 15/16 inches deep at 45 degrees. with Delta, deliver the largest rip and The BEAST10 comes with a The BEAST5 also offers an integrat- Driving Systems: diagonal cutting capacities in their removable table extension, and an ed plunge and comes with a classes,” states Ted optional water tray extension pro- one-year warranty. Labour and material savings on every job. Skaff, Lackmond vice vides additional water containment Helps you stay competitive. president of market- when cutting large format tiles. An ing. “The BEAST7 can innovative snake pipe water nozzle The Lackmond BEAST10 Flexibility to be used for multiple applications. tile saw has category- make diagonal cuts allows for precise water control and leading capacity with the Ergonomically friendly. on 18x18-inch tile and SKAFF placement. The durable steel pipe ability to make diagonal Completing the job in a fraction of the time. 24-inch rip cuts. The BEAST10 can saw frame is constructed to with- cuts on 24x24-inch make a diagonal cut on a 24x24-inch stand the toughest conditions. tiles and rip cuts of APR tile, and rip cut 34 inches — and 39 34 inches and 39 APR inches with plunge. | | M inches with plunge.” “We listened to the tile contractors Ensure your location is stocked today. muro.com/sup M A A Y and designed a powerful 7-inch saw Y 2016 25 2016 Powered by tilting 13- and 15- that offers the same cutting Call us at 1.800.665.6876 Muro North America amp motors respectively, the 7- and capacity as most 10-inch 68 69 INDUSTRY INDUSTRY Dewalt’s model DCS361 20V MAX Lithium-ion 7 and averages 183 cuts of 2x4 pine “Whether the DCS361 is used around heavy miter saws and table 1/4-inch sliding miter saw or 275 cuts of 3 1/4-inch pine base for flooring, small crown work, toe saws, but now they are looking for has a 3 1/2-inch maxi- molding on a single battery charge molding, back splashes, base, more convenience.” UPDATE mum vertical cut and can with a model DCB204 4.0-Ah bat- chair rail, door or window casting UPDATE slice an average of 183 tery. The DCS361, with battery, or any other woodworking applica- Table saws are being developed 2x4s on a single charge. weighs just 31.6 pounds and has tion, it’s a convenient option for the with roll cage designs that not only the 20V MAX Lithium-ion 7 1/4 inch integrated cast-in side handles for professional,” Beck advises. “The help make the saw lighter and more model DCS361 sliding miter saw,” easy job site transport. DCS361 is available as a bare unit durable, but also increase the life states Jeff Beck, DEWALT group (DCS361B) or as a kit (DCS361M1) of the motor by increasing air flow. by Tom by Tom Key ease-of-use features of the and both units come equipped with Customers are also looking for saws by Tom cuts and easy bevels. product manager, Professional Power Hitachi’s C12RSH 12-inch, Tools. “The DCS361 is optimized for DCS361 include an integrated XPS a dust bag, hold-down clamp and a with accessory or built-in stands, sliding dual compound miter blade light which casts a shadow 40-tooth blade.” especially with heavy-duty wheels. saw with laser features a Transport across the job site is general contractors and remodelers Hammel showing where the blade will cut. compact slide system that Hammel key for the Bosch CM12SD, so who do trim installation, flooring work A stainless steel miter detent plate HITACHI Miter saws are also becoming allows the saw head to slide carry handles offer a rounded grip and cutting 2x material.” along fixed rails, eliminating makes it easy to adjust the saw. “As the number of housing starts more versatile as more millennials and are located on the underside of the need for rear clearance. Other features include 10 positive increase year over year, so is the enter the work force. While the “old extensions for easy movement. The The 7 1/4-inch DCS361 features a miter stops, a fast and easy cam demand for lighter and school” contractor was satisfied with CM12SD offers a combination dust single left bevel which ranges from -3 position. This in turn, has pushed lock and rubber feet for no-slip and more portable table and an 8 1/2-inch single-bevel miter saw chute and vacuum adapter for 1 1/4- to 48 degrees left. With a 3 1/2-inch manufacturers to develop taller no-scratch grip. A high-visibility bevel miter saws,” begins that gave him the ability to cut crown inch and 35mm hoses. maximum vertical, 3 5/8-inch crown fences that can slide out of the way nested, and 2x8-inch horizontal cut scale, adjustable bevel overrides and Lucio Morales, Hita- molding in the flat position, current when making bevel cuts. DEWALT capacity, the DCS361 will handle a miter pointer on the left side of the chi associate product generation woodworkers are look- table provides maximum visibility and manager. “In the past, MORALES ing for features like the ability to cut “DEWALT brings cordless conve- most of the common cuts needed. New generation woodworkers versatility. most contractors did not mind toting large crown molding in the standing nience to the miter saw category with The DCS361 spins at 3,750 rpm CONTINUED ON PAGE 72 ® Strong-Point Stainless Steel Screws Unslotted Hex Washer Head, Pan Head, Flat Head, Modified Truss, Bugle Head, Trim Head, 410 and 305 8-18 x 1/2” - 14-14 x 6” 6-20 x 3/4” - 10-16 x 1-1/2” www.ContractorSupplyMagazine.com www.ContractorSupplyMagazine.com www.ContractorSupplyMagazine.com 8-18 x 1/2” - 8-18 x 1-5/8” 8-18 x 1/2” - 14-14 x 5” 8 x 1-1/4” - 8 x 3” 12-24 x 1-1/4” - 12-24 x 2” 8 x 1-1/4” - 12 x 4” 12-24 x 1-1/4” - 12-24 x 2” 7 x 1-5/8” - 7 x 3” 6-20 x 3/8” - 10-16 x 2” 7 x 1-5/8” - 7 x 3” Self-Drilling Drywall Needle Point Stainless Steel Concrete Pole Gripper Outdoor Cement Board Woodworking Special Application APR APR | | M M A A Y Y 2016 Los Angeles Chicago Atlanta Dallas Portland Houston Cleveland Miami 2016 www.strong-point.net 800.762.2004 800.533.9669 800.822.9690 800.558.7222 800.434.5606 800.558.7222 800.533.9669 800.822.9690 70 71 INDUSTRY INDUSTRY have also influenced manufactur- The saw blade market has also manager for Hitachi.
Load more

Recommended publications
  • MITER SAW SAFETY (Reviewed 9/27/2007)
    MITER SAW SAFETY (Reviewed 9/27/2007) 1. Tool Use and Care • Use clamps or other practical way to secure and support the work piece to a stable platform. Holding the work by hand or against you body is unstable. It allows for work to shift, causes binding of the tool and loss of control. • Do not force tool. Use correct tool for you application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool for purposes not intended – for example; do not use the miter saw for slicing meat. • Do not use tool if switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is dangerous. • Disconnect the plug from the power source before making any adjustments for changing accessories. Such prevention safety measures reduce the risk of starting the tool accidentally. • Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges, are less likely to bind and easier to control. When mounting saw blades be certain that the arrow on the blade matches the direction of the arrow marked on the tool and that the teeth are also pointing in the same direction. • Inspect guards before using. Keep guards in place. Check moving parts for binding or any other condition that may affect the normal operation of safety features of the tool. If damaged, have tool serviced before using the tool. Many accidents are caused by poorly maintained tools. • Do not alter or misuse tool.
    [Show full text]
  • LS1219 / LS1219L Slide Compound Miter
    Satisfy Professional's Needs Max. cutting capacity (height x width) Slide Compound Miter Saw LS1219 / LS1219L 305mm (12") Cross Cut Miter Cut (left & right) Bevel Cut (left & right) Compound Cut Crown Baseboard molding, (Skirt board) 45 degree 90o type 90o 45o 45o 45o 90o 90o 45o Bevel Miter Bevel Miter Single sliding system Bevel 45o 61 x 268 left (2-3/8” x 10-1/2”) 92 x 268 61 x 382 enables smooth o o 45 (3-5/8”x10-1/2”) 45 (2-3/8” x 15” ) Upright cutting Upright cutting left/ 107 x 255 left 71 x 363 Miter 71 x 255 203 (8”) 171 (6-3/4”) right (4-1/4” x 10”) (2-13/16” x 14-1/4”) o 45 (2-13/16” x 10”) operation to produce 92 x 382 left/ (3-5/8” x 15”) right 107 x 363 Bevel superior cuts (4-1/4” x 14-1/4”) o 44 x 268 45 (1-3/4” x 10-1/2”) 92 x 185 44 x 382 right o o 60 (3-5/8” x 7-1/4”) 45 (1-3/4” x 15” ) Horizontal cutting Horizontal cutting left/ 107 x 178 right 54 x 363 Miter o right (4-1/4” 7”) (2-1/8” x 14-1/4”) 45 54 x 255 320 (12-5/8”) 416 (16-3/8”) left/ (2-1/8” x 10”) right (mm) Accessories Vertical vise assembly Dust bag assembly Stand Part No. 126617-2 Part No. 122852-0 Part No. WST06 Horizontal vise assembly Part No.
    [Show full text]
  • 10˝ Dual Speed Sliding Compound Miter Saw
    10˝ DUAL SPEED SLIDING COMPOUND MITER SAW LISTED E493385 For replacement parts visit Model # 70730 WENPRODUCTS.COM bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us at: 800-232-1195 (M-F 8AM-5PM CST) [email protected] WENPRODUCTS.COM TABLE OF CONTENTS Technical Data 2 Introduction 3 General Safety Rules 4 Specific Rules For the Miter Saw 6 Electrical Information 9 Unpacking and Transporting 10 Know your Miter Saw 10 Assembly and Adjustments 12 Operation 19 Maintenance 22 Exploded View & Parts List 23 Warranty 26 TECHNICAL DATA Model Number: 70730 Motor: 120 V, 60 Hz, 15A No-Load Speed: Speed 1: 2000 RPM Speed 2: 4500 RPM Blade Model Number: 70730-002 Blade Size: 10˝ TCT Multi-Purpose Blade Arbor Size: 5/8 in. Arbor Number of Teeth: 48 Teeth Miter Table Angles: 0° to 45° Left & Right Bevel Cut Angles: 0° to 45° Left Only Cutting Capacity: 0° Miter, 0° Bevel: 12 by 3-1/2 in. 45° Miter, 0° Bevel: 8-1/2 by 3-1/2 in. 0° Miter, 45° Bevel: 12 by 1-7/8 in. 45° Miter, 45° Bevel: 8-1/2 by 1-7/8 in.
    [Show full text]
  • Compound Sliding Miter Saw About
    Compound Sliding Miter Saw About Miter saws are saws designed to perform quick accurate crosscuts in materials such as wood and some plastics. The tool shop miter saw is a dual action compound sliding miter saw. This means that it is capable a large cuts up to 4 inches by 12 inches nominal size. The compound feature of the saw allows both miter and bevel cuts to be made at the same time. Miter adjustments are from 50 degrees to the left of square and 60 degrees to the right of square. Bevel adjustments are 45 degrees in either direction of the vertical position. Class Goal The goal of this class is to allow students to become certified safe operators of the tool shop miter saw. This handout along with hands on training will provide the information needed to operate the miter saw in a safe and efficient manner. You must successfully pass both the hands on training and quiz to become fully certified. SAFETY! Shop Safety: • Remember to always wear closed two shoes in the shop area at ALL times. • Always make sure to have long hair tied back and loose clothing secured. • Never leave a machine running unattended. They can have a mind of their own sometimes. • Never interrupt someone while they are using a piece of equipment. • Always report any incident to the shop supervisor immediately. • Check in with the shop supervisor before using any equipment in the tool shop. • Never attempt to repair or modify any equipment. • Always cleanup work area and return tools to their proper locations when finished.
    [Show full text]
  • Operator's Manual
    OPERATOR’S MANUAL 10 in. Compound Miter Saw TS1345L - Double Insulated 31.6 22.5 22.5 31.6 Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Introduction ..................................................................................................................................................................... 2 Warranty .......................................................................................................................................................................... 2 General Safety Rules ....................................................................................................................................................3-4 Specific Safety Rules ....................................................................................................................................................4-5 Symbols ........................................................................................................................................................................... 6 Electrical .........................................................................................................................................................................
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Ana White Workbench for Ryobi Page 1 of 22 Tools • Miter Saw •
    Ana White Workbench for Ryobi Page 1 of 22 Tools • Miter Saw • Drill with drill bits • Pneumatic Stapler • Tape Measure • Square • Table Saw • Clamps Shopping List • 4 Sheets of 3/4” plywood • 2 sheets of 1/4" plywood • 8 – 3” casters with brakes • 3/4” screws for attaching caster wheels • 11 – 2x4 @ 8 feet long • 8 – 1x2 @ 8 feet long • 3” self tapping wood screws • 2” and 1-1/4” 18 gauge staples • 4 handles for carts Ana White Workbench for Ryobi Page 2 of 22 Workbench Cut List • 6 – 2x4 @ 49” • 4 – 2x4 @ 28” • 8 – 2x4 @ 39-1/2” • 2 – 1/4” plywood @ 39-1/2” x 31” (see plywood cutting diagrams) • 2 – 3/4” plywood @ 52-1/4” x 31” (see plywood cutting diagrams) • 4 – 2x4 @ 29-1/2” • 2 – 2x4 @ width of saw (shown at 24”) • 2 – 3/4” plywood @ width of saw x 31” (shown at 24”) Cart Cut List • 2 –3/4” plywood @ 48” x 30” (see plywood cutting diagrams) • 4 – 3/4” plywood @ 8-1/4” x 30” (cut from scraps, see plywood cutting diagrams) • 24 – 1x2 @ 28” • 8 – 3/4” plywood @ 8-1/4” x 28” (cut from scraps, see plywood cutting diagrams) • 4 – 1/4” plywood @ 30” x 28-3/4” • 4 – 3/4” plywood @ 48” x 29-1/2” (see plywood cutting diagrams) Ana White Workbench for Ryobi Page 3 of 22 Ana White Workbench for Ryobi Page 4 of 22 Workbench Step 1: Build Workbench Frames Attach using 3” wood screws and glue at corners. Check for square and adjust as needed.
    [Show full text]
  • Sliding Dual-Bevel Compound Miter Saw Model JMS-10X and JMS-12X
    Operating Instructions and Parts Manual Sliding Dual-Bevel Compound Miter Saw Model JMS-10X and JMS-12X JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-707210 Ph.: 800-274-6848 Edition 1 06/2019 www.jettools.com Copyright © 2019 JET 1 13. Keep safety guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately after completion of maintenance. 1.0 IMPORTANT SAFETY 14. Check damaged parts. Before further use of the machine, a guard or other part that is damaged INSTRUCTIONS should be carefully checked to determine that it WARNING – To reduce risk of injury: will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, 1.1 General machine safety warnings mounting and any other conditions that may 1. Read and understand the entire owner's affect its operation. A guard or other part that is manual before attempting assembly or damaged should be properly repaired or operation. replaced. 2. Read and understand the warnings posted on 15. Provide for adequate space surrounding work the machine and in this manual. Failure to area and non-glare, overhead lighting. comply with all of these warnings may cause 16. Keep the floor around the machine clean and serious injury. free of scrap material, oil and grease. 3. Replace warning labels if they become 17. Keep visitors a safe distance from the work obscured or removed. area. Keep children away. 4. This saw is designed and intended for use by 18.
    [Show full text]
  • Power Tools Dependable Tools • Reliable Brand • Affordable Price
    Power Tool Catalog The Right Tool for the Right Project Power Tools Dependable Tools • Reliable Brand • Affordable Price Introducing Alltrade Trades Pro® power tools, a complete assortment of the most popular power tools with competitive features at affordable price points. Perfect for the basic maintenance projects value-conscious homeowners need to tackle from time-to-time. With an extensive range of cordless portable power tools, electric portable power tools and bench top tools, Alltrade Trades Pro® caters to every customer’s category requirements. The tools offer outstanding features, dependable quality and are backed by a solid warranty to ensure end-user satisfaction. Our high-impact packaging is attractive, informative and communicates brand reliability and value to the consumer. We are committed to delivering the very best value for the price. Alltrade Trades Pro® has what you need for sales success! 2 Cordless Power Tools 836777 836774 4.8 Volt 3-Position Cordless Screwdriver 14.4 Volt Cordless Drill/Driver • Handle locks in 3 positions • 3/8” keyless chuck, 16 position clutch • Built-in worklight, auto spindle lock • Variable speed trigger, electric brake • Includes 4 pc. 2” power bits • Includes battery and 5-8 hour charger UPC: 028907-340135 Case Qty: 10 Shelf Qty: 10 UPC: 028907-340104 Case Qty: 8 Shelf Qty: 8 836710 836840 18 Volt Cordless Drill/Driver 18 Volt Cordless Drill/Driver & Worklight • 3/8” keyless chuck, 16 position clutch • 3/8” keyless chuck, 16 position clutch • Variable speed trigger, electric brake • Variable speed trigger, electric brake • Includes battery and 5-8 hour charger • Includes worklight, battery and 5-8 hour charger UPC: 028907-338439 Case Qty: 8 Shelf Qty: 8 UPC: 28907-344065 Case Qty: 6 Shelf Qty: 6 836785 24 Volt Cordless Drill/Driver Kit • 3/8” keyless chuck, 25 position clutch • Variable speed trigger, electric brake • Includes battery, 5-8 hour charger, 13 pc.
    [Show full text]
  • Getting to Know Your Miter Saw
    BM 2610007877 04-10:BM 2610007877 04-10.qxp 4/26/10 8:13 AM Page 8 Getting To Know Your Miter Saw 2 3 30 7 1 1 31 4 29 28 5 27 6 26 25 8 24 23 9 8 10 22 9 11 15 21 20 19 18 17 16 14 13 12 To avoid injury from accidental 10. Kerf Inserts – Kerf inserts can be adjusted to ! WARNING starting, remove plug from power different blade widths to minimize workpiece source outlet before making any adjustments. tear-out. 1. Switch lock-Off Release Buttons – One of 11. Miter Detent Override – Allows detent action to these two buttons must be pressed before the be locked out, allowing for micro-adjustments to power switch can be pressed. any miter angle. 2. power Switch – The power switch used with the 12. Miter lock Knob – The miter lock knob locks the “Lock-OFF” button energizes the unit. miter saw table at any desired miter angle. 3. Main Handle – This handle contains the power 13. Miter Detent lever – The lever releases the switch. Pulling this handle down lowers the blade table from the detent. into the workpiece. 14. Bevel lock lever – The front-positioned bevel 4. lower Blade Guard/lower Guard lip – The lock lever locks the head assembly at the desired lower blade guard helps protect your hands from bevel angle. the spinning blade. It retracts as the blade is 15. Miter Scale/Miter pointer – The pointer rotates lowered. Lip can be used to raise the lower guard with the table and blade.
    [Show full text]
  • 12" Sliding Dual Bevel Compound Miter Saw Benchtop Series – Model No
    Operating Instructions and Parts Manual 12" Sliding Dual Bevel Compound Miter Saw Benchtop Series – Model No. JMS-12SCMS For serial no. 10070329 and higher JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-707120 Ph.: 800-274-6848 Revision B3 03/2017 www.jettools.com Copyright © 2017 JET Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product. (See chart below) • Accessories carry a limited warranty of one year from the date of receipt. • Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is Covered This warranty covers only the initial purchaser of the product from the date of delivery. What is Covered This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials outside recommended guidelines may void the warranty.
    [Show full text]
  • Safety Information for Miter Saw Is Page Contains Important Safety Information for Those Who Handle Miter Saws
    Safety Information for Miter Saw is page contains important safety information for those who handle miter saws. Please read this information carefully and use the miter saws in a safe manner. STORE PROPERLY Mandatory action sign Prohibition sign If you ignore these prohibitions, it may lead to serious or fatal injury. READ AND UNDERSTAND THE INSTRUCTION MANUAL Improper or unsafe use of a miter saw may result in serious injury. Please read the instruction manual attached to the product thoroughly before using any miter saw. For a downloadable pdf version of an owner’s manual, please click the following link: The Instruction Manual Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Loose clothing, jewelry or long hair caught in a moving blade can cause serious injury. Do not wear loose clothing or jewelry. Contain long hair. Make sure that the PLUG IS DISCONNECTED from the power source (or, for battery-operated tools, the battery is removed) when preparing for use or inspecting your tool. Failure of the above may result in an UNEXPECTED START OF THE MITER SAW which can cause serious injury. When starting the use of tool, make sure that the SWITCH IS IN OFF POSITION BEFORE CONNECTING THE PLUG. Failure of the above may result in an UNEXPECTED START OF THE MITER SAW Switch which can cause serious injury. SAFETY RULES FOR MITER SAW Always confirm that the lower guard is in the proper place before using the miter saw. Always check that the lower guard moves smoothly and covers the saw blade properly.
    [Show full text]