Industry Resource Guide

Total Page:16

File Type:pdf, Size:1020Kb

Industry Resource Guide APRIL 2010 Industry resourceGuIde Manufacturer Buyer's Guide | industry distriButors' Guide | dHi consultants' directory A P u b l i c A t ion of the Door A n D h A r D w A r e i n s t i t u t e HAS FOUR LOCATIONS THAT CAN GET your order anywhere in 48 hours or less, 2.1 MILLION SKUs from all the leading manufacturers IN STOCK, 25 years of SUPERIOR KNOWLEDGE and CUSTOMER SERVICE 24/7 ONLINE QUOTING, ORDERING and TRACKING plus an ONLINE TECHNICAL LIBRARY that’s the BEST IN THE BUSINESS. No matter what your challenge, Security Lock Distributors delivers unparalleled service you can depend on. From integrating electronic and mechanical hardware solutions, to the industry’s most extensive in-stock inventory, Security Lock Distributors has a solution for... Every budget. Every schedule. Every time. *Factory-recognized Master Stocking Distributor 800-847-5625 WWW.SECLOCK.COM HAS FOUR LOCATIONS THAT CAN GET your order anywhere in 48 hours or less, 2.1 MILLION SKUs from all the leading manufacturers IN STOCK, 25 years of SUPERIOR KNOWLEDGE and CUSTOMER SERVICE 24/7 ONLINE QUOTING, ORDERING and TRACKING plus an ONLINE TECHNICAL LIBRARY that’s the BEST IN THE BUSINESS. No matter what your challenge, Security Lock Distributors delivers unparalleled service you can depend on. From integrating electronic and mechanical hardware solutions, to the industry’s most extensive in-stock inventory, Security Lock Distributors has a solution for... Every budget. Every schedule. Every time. *Factory-recognized Master Stocking Distributor 800-847-5625 WWW.SECLOCK.COM ALLDoorsAndHardwareAd021610.qxp:ALLDoorsAndHardwareAd021610.qxp 2/18/10 12:42 PM Page 1 Chief Executive Officer: Jerry Heppes, CAE [email protected]; (703) 766-7010 ADVANTAGE is Working Managing Editor: Jesse Madden [email protected]; (703) 766-7033 Hard to be Your Lites Production Manager: Sharon Newport [email protected]; (703) 766-7009 and Louvers Supplier Advertising Manager: Molly S. Long [email protected]; (703) 766-7014 At Advantage Lites & Louvers (A-LL), we earn our distributors’ loyalty with products and value that Magazine Creative Director: Martin D. Stanley meet the needs of every project — from strictly [email protected]; (703) 766-7016 standard to deluxe. We welcome the opportunity Dir. of Certification/Tech. Services: Keith Pardoe, DAHC/CDC, CDT to satisfy your customers with reliable, cost-effective [email protected]; (703) 766-7024 vision lites and door louvers. EOiBADiT r Al O rD A-LL lite kits are designed to Timothy Petersen, Leed AP, Brendan J. Daley ensure correct size and fit and Patrick T. Donohoe, AHC, Robert D. Maas are offered with a complete John E. Martin, AHC, David D. McBrier selection of glass. From top- James T. White, Jr., AHC/CDC, Hendrik Wolst, fire-rated ceramic safety Wendy Caibe-Felt, Dir. of Communications, Staff Liaison glazing to mid-range fire and safety wired and clear glass Vol. 74, No. 4 solutions. And our louvers for every purpose include a Doors and Hardware (ISSN 0361-5294) is published monthly by the fire-rated model featuring Model T4G Door and Hardware Institute (DHI), 14150 Newbrook Drive, Suite 200, 20 gauge Chantilly, VA 20151-2232 • (703/222-2010; Fax: 703/222-2410) concealed intumescent strips, cold rolled for both economical retrofits steel Periodicals postage paid at Fairfax, VA, and other additional and installation in new mailing offices. Postmaster: Send address changes to fire-door assemblies. Doors and Hardware, 14150 Newbrook Drive, Suite 200, Chantilly, VA 20151-2232. E-mail: [email protected]; Web site: www.dhi.org. You can count on prompt delivery nationwide. e ditorial Policy: The Door and Hardware Institute is an international not- We ship in-stock products within 48 hours from for-profit association of individuals and companies in the door and architectural our North Carolina plant and distribution centers hardware profession. Authors’ opinions do not necessarily reflect the official in New York and Las Vegas. And custom orders views of the Door and Hardware Institute. ship within 10 working days. The magazine cannot guarantee the validity or accuracy of any data, claim or opinion appearing in any article or advertisement. However, the magazine Call us today for the name of our representative is designed to provide accurate and authoritative information on the subject in your area. We’re ready to talk business. matter covered. The information is presented with the understanding that the publisher is not engaged in rendering legal or other expert professional services. If such assistance is required, the service of a competent professional should be sought. Advertisements and product information do not constitute an endorsement, nor a DHI position concerning their suitability. The publisher reserves the right to reject any advertising. Advertisers and their agencies assume liability for all 1-800-635-5335 | 1-718-585-3230 www.a-ll.com advertising content and assume responsibility for any claims that may arise from their advertisements. The publisher makes every effort to ensure suitable placement of advertising but assumes no responsibility in this regard. Send subscriptions, advertising, business and editorial matter to Doors and Hardware, 14150 Newbrook Drive, Suite 200, Chantilly, VA 20151-2232. Letters to the editor are welcome and will be considered for publication in whole or in part in “Letters to the Editor.” All editorial sent to the magazine will be treated as unconditionally assigned for publication and copyright purposes and are subject to the editor’s unrestricted right to edit and comment editorially. For current subscriptions, enclose an address label or facsimile from a recent copy when writing to DHI. For new subscription information, call DHI at 703/222-2010. Copyright 2010 Door and Hardware Institute. All rights reserved. Nothing may be reprinted without permission from the publisher. © 2010 Advantage Lites & Louvers Printed in the u. s. A. iPM#0360406 2 DOORS & HARDWARE £ APRIL 2010 Craftsmanship. Artistry. Quality. www.VTINDuSTRIeS.CoM 10_DoorAd_Craftsmanship_8.375x10.875.indd 1 3/12/10 11:00:55 AM Description: “Craftsmanship. Artistry. Quality.” VT Door Ad – CRAFTSMANSHIP Job #: VTT5810 Job Title: 2010 Door Print Ads Client: VT Industries Publication: DHI — April Issue Ad Size: 8.375” x 10.875” (Bleed: 8.625” x 11.125”) Date: 3.12.10 Prepared by Bozell doors&hardware advancing life safety & security solutions Accessclosing features a d index 198 m anufacturer Buyer’s Guide 6 classifieds 197 index to industry Products 66 tech tip 199 industry Products listing 68 2010 dhi resource guide APRIL 2010 elcome to DHI’s annual consolidation of the Buyer’s Guide, the W Consultants’ Directory and the Distributors’ Directory into the industry’s only comprehensive Resource Guide. Whether you need information on manufacturers, products, suppliers, distributors, spec writers or consultants, you’ll find it all in this comprehensive guide for the openings industry. DHI is the leading voice of the openings industry and its publications are the most widely read. INDUSTRYRESOURCEGUIDE Specifically targeted at audiences within the MANUFACTURER BUYER'S GUIDE | INDUSTRY DISTRIBUTORS' GUIDE | DHI CONSULTANTS' DIRECTORY distribution channel, our 13,000 readers are the architects, distributors, specifiers and decision makers at companies across the globe. We are the source these people turn to for information on trends, code issues, education and networking. As a result, DHI is ideally situated to be able to promote communication between sales agents, distributors, manufacturers, consultants and consumers. No matter what the need, A PUBLICATION OF THE DOOR AND HARDWARE INSTITUTE o n the cover: The collage of photos on the cover represents just a few of the areas where our industry is involved in advancing life safety and security in the built environment. The two photos appearing at the bottom of the cover from left to right are courtesy of Omnia Industries, Inc (Omnia New Modern Levers) and Hoppe North America, Inc (HLSTM 7 Series™ Multipoint Hardware System) 4 DOORS & HARDWARE £ APRIL 2010 april 2010—industry resource guide Access calendar i ndustry distributors’ Guide 96 April5 2 – May 2, 2010 September 14–21, 2010 DHI Education DHI Education dHi consultants’ Guide 156 (National School) (National School) National Navy Pier Conference Center Chicago, IL Lansdowne, VA www.dhi.org www.dhi.org September 22–23, 2010 May1 3 – June 4, 2010 DHI 35th Annual DHI Canada Exposition Technical Education Navy Pier Delta Toronto Chicago, IL Airport West www.dhi.org Mississauga, ON. Canada www.dhicanada.ca you’ll find listings of individuals and companies who September 14–23, 2010 are capable of providing solutions custom designed DHI 35th Annual for your job. Conference By serving as a conduit to help build alliances and Navy Pier relationships, DHI will strengthen your position as Chicago, IL an expert making a difference to safely secure the www.dhi.org built environment. In addition to the opportunities afforded to DHI members through education programs, professional credentialing, and technical ★ See Our Product Showcase on Page 152 publications, ultimately you benefit most from being a part of this small, close-knit industry where networking is an invaluable tool that can expand business contacts and opportunities. We hope that as an integral part of DHI and the architectural openings community, you’ll retain this issue as a year-round resource and will use it monthly, weekly, if not daily, as you discover new trends, learn best practices, and build a mutually beneficial network with some of the industry’s best companies and leaders. d oors & Hardware is a publication of the door and Hardware institute intent on advancing life safety & security solutions. APRIL 2010 £ DOORS & HARDWARE 5 Manufacturers Buyer's Guide T w2010 e N y - S e c o N d e d i T i o N he Buyer’s Guide 22nd Edition will serve as your handy desktop reference to more than 800 manufacturing tcompanies in the architectural openings industry.
Recommended publications
  • PPI Detailed Report: Data for July 2008
    PPI Detailed Report Data for July 2008 Editors Vol. 12, No. 7 Joseph Kowal William Snyders Antonio Lombardozzi Contents Page Producer Price Indexes, July 2008 ...……………………………………………………………….......................... 1 Resampling of Industries ……………………………………………………………………………………………. 5 Producer Price Indexes Introduced for the Nonresidential Building Construction Sector – NAICS 23811X, 23816X, 23821X, and 23822X ……………..……………………………………………………………...………… 6 Charts Finished goods ……………………………………………………………………………………………... 8 Intermediate goods ………………………………………………………………………………………… 9 Crude goods ………………………………………………………………………………........................... 10 Tables Producer Price Indexes 1. Stage of processing ……………………………………………………………………………………… 11 2. Selected commodity groupings by stage of process …………………………………….......................... 12 3. Selected stage of processing groupings, seasonally adjusted …………………………………………… 16 4. Net output of selected industries and industry groups …………………………………………………... 17 5. Net output of selected industries and their products …………………………………………………….. 19 6. Commodity groupings and individual items …………………………………………………………….. 111 7. Durability of product …………………………………………………………………………………….. 151 8. Special commodity groupings …………………………………………………………………………… 152 9. Material and supply inputs to construction industries…………………………………………………… 154 10. Industry and industry-classified product indexes recoded, effective July 2008 ………………………… 155 11. New industry and industry-classified product indexes introduced into the Producer Price Index, effective
    [Show full text]
  • Decoded FIRE DOOR ASSEMBLY CLASSIFICATIONS
    Decoded FIRE DOOR ASSEMBLY CLASSIFICATIONS By Lori Greene, DAHC/CDC, FDAI, FDHI, CCPR 62 OCTOBER 2017 DOORS + HARDWARE In fire walls between buildings or in walls which divide a building into different fire areas, opening protectives typically require a three-hour rating. Some codes may call for walls with a four-hour rating, although this is not very common in the U.S. NFPA 80 – Standard for Fire Doors and Other Opening rating are also classified as B-label doors, and are used Protectives, classifies openings protected by fire door in some interior exit stairway and ramp enclosures. assemblies in one of five categories. The rating may For example, for most applications, the 2015 edition of be expressed in hours or minutes, as an alphabetical the International Building Code (IBC) requires a two- designation, or a combination of the two. While using hour wall (and 90-minute fire doors) when the stair is a letter designation is still fairly common, it’s best to connecting four stories or more, and a one-hour wall include the hourly rating, particularly when specify- (and 60-minute fire doors) when the stair is con- ing or supplying a B-label door which may have either necting less than four stories. The number of stories a 60-minute or 90-minute rating. includes basement levels but not mezzanines. Information about NFPA 80’s classifications for fire door assemblies is found in Annex D of the standard. Class C — Walls or partitions between rooms As with the other annexes, Annex D is included for and corridors having a fire resistance rating of informational purposes and is not part of the NFPA one hour or less 80 requirements, but it’s helpful to understand the In a one-hour wall surrounding a hazardous area, purpose of each type of assembly when specifying ¾-hour fire door assemblies may be required.
    [Show full text]
  • Distribution of Sales of Manufacturing Plants
    SALESF O MANUFACTURING PLANTS: 1929 5 amounts h ave in most instances been deducted from the h eading, however, are not representative of the the total sales figure. Only in those instances where total amount of wholesaling done by the manufacturers. the figure for contract work would have disclosed data 17. I nterplant transfers—The amounts reported for individual establishments, has this amount been under this heading represent the value of goods trans left in the sales figure. ferred from one plant of a company to another plant 15. I nventory.—The amounts reported under this of the same company, the goods so transferred being head representing greater production than sales, or used by the plant to which they were transferred as conversely, greater sales than goods produced, are so material for further processing or fabrication, as con— listed only for purposes of reconciling sales figures to tainers, or as parts of finished products. production figures, and should not be regarded as 18. S ales not distributed.—In some industries, actual inventories. certain manufacturing plants were unable to classify 16. W holesaling—In addition to the sale of goods their sales by types of customers. The total distrib— of their own manufacture, some companies buy and uted sales figures for these industries do not include sell goods not made by them. In many instances, the sales of such manufacturing plants. In such manufacturers have included the sales of such goods instances, however, the amount of sales not distributed in their total sales. The amounts reported under is shown in Table 3.
    [Show full text]
  • Annual Report of 2019-2020
    Chairman Mahesh Kantilal Desai Vice Chairman Arun Kumar Garodia Executive Director Suranjan Gupta Addl. Executive Director & Secretary Adhip Mitra Auditors M/s. Ranjit Jain & Co. Diamond Heritage, Unit No.H605A, 6th Floor, 16 Strand Road Kolkata 700001 Registered & Head Office Vanijya Bhavan (1st Floor) International Trade Facilitation Centre 1/1 Wood Street, Kolkata-700 016 1 Suranjan Gupta Adhip Mitra Executive Director Addl. Executive Director & Secretary H.O. (Cell) Registered & Head Office Vandhna (4th Floor),11 Tolstoy Marg Vanijya Bhavan (1st Floor) New Delhi-110 001 International Trade Facilitation Centre Tel : 91-11-23353353, 23711124/25 1/1 Wood Street, Kolkata-700 016 Fax : 91-11-23310920 Tel : 91-33-22890651/52/53, Fax : 91-33-22890654 E-mail : [email protected] E-mail : [email protected] Mumbai New Delhi Dr. Rajat Srivastava Rakesh Suraj Regional Director & Director (Marketing and Sales) Regional Director EEPC INDIA EEPC INDIA B-202 & 220, Aurus Chambers Flat No. 10 P, Q, N, 10th Floor Annex "B", 2nd Floor, Behind Mahindra Tower DCM Building, 16 Barakhamba Road S.S. Amrutwar Marg, Worli, Mumbai-400 013 New Delhi-110 001 Tel : 91-22-42125555 Tel : 91-11-23314171/74 Fax : 91-22-42125556 Fax : 91-11-23317795 E-mail : [email protected] E-mail : [email protected] Bengaluru J.V. Raja Gopal Rao Sr. Deputy Director EEPC INDIA Embassy Square 103, First Floor No.148, Infantry Road, Bengaluru-560 001 Tel : 91-80-22261396 / 22268669 Fax : 91-80-22266914 E-mail : [email protected] 2 PAGE CONTENTS 5 REPORT OF THE WORKING COMMITTEE 10 ANNEXURE TO THE WORKING COMMITTEE REPORT 16 EXPORT PERFORMANCE 21 PROMOTIONAL ACTIVITIES 57 SIGNING OF MOUS 60 SEMINARS / CONFERENCES / MEETINGS IN INDIA 66 POLICY MATTERS 72 LIST OF ANNEXURES 91 WORKING COMMITTEE 96 OFFICE BEARERS 97 COMMITTEE OF ADMINISTRATION 98 INDEPENDENT AUDITOR’S REPORT & ACCOUNTS 3 Former Chairmen of EEPC India 1955-56 Late D.N.
    [Show full text]
  • Builders' Hardware (Nontemplate) (Second Edition)
    CS22-40 Hardware; Builders* (Nontemplate) U. S. DEPARTMENT OF COMMERCE HARRY L. HOPKINS, Secretary NATIONAL BUREAU OF STANDARDS LYMAN J, BRIGGS, Director BUILDERS^ HARDWARE (NONTEMPLATE) (SECOND EDITION) COMMERCIAL STANDARD CS22-40 (Supersedes CS22-30) Effective Date for New Production from July 1, 1940 A RECORDED VOLUNTARY STANDARD OF THE TRADE UNITEa> STATES GOVERNMENT PRINTING OFFICE WASHINGTON ; 1940 For sale by the Superintendent of Documents, Washington, D. C. Price 10 cents U, S. Department of Commerce National Bureau of Standards PROMULGATION of COMMERCIAL STANDARD CS22-40 for BUILDERS’ HARDWARE (NONTEMPLATE) (Second Edition) I The first general conference of producers, distributors, and users I held at the Department of Commerce, May 20, 1924, resulted in the I publication of Simplified Practice Recommendation No. 18, Builders’ Hardware, effective January 1, 1925. On the recommendation of the first revision conference in New York City on September 14, 1926, with the approval of the standing committee, and subsequently | accepted by the trade, there was published Simplified Practice Recom- j) mendation No. 18, Builders’ Hardware (first revision, September 14, i 1926), effective May 1, 1927. I On May 7, 1929, the Advisory Committee on Standardization of 1 Builders’ Hardware, with the approval of the standing committee, adopted additional nomenclature, types, sizes, standard finishes, and I practices, which, after written acceptance by the trade, were published as Builders’ Hardware (Nontemplate), Commercial Standard CS22-30, effective for new production from June 1, 1930. On April 16, 1940, upon recommendation of the Advisory Com- 1 mittee on Standardization of Builders’ Hardware and with the endorse- ment of the standing committee, a further revision was circulated to the trade for written acceptance.
    [Show full text]
  • BUILDERS HARDWARE LIST PRICES October 2017
    BUILDERS HARDWARE LIST PRICES October 2017 CAL-ROYAL PRODUCTS, INC. 6605 Flotilla St., Commerce, California 90040 USA TEL: (323) 888-6601 FAX: (323) 888-6699 Website: www.cal-royal.com Email: [email protected] BUILDERS HARDWARE PART NUMBER OCT 2017 TABLE OF CONTENTS I. NUMBERS AND LETTERS VII. DOOR GUARDS House Letters (A-E), Diecast............................................ DH1 Door Angle Protector................................................ DH9 House Letters (A-F), Diecast............................................. DH1 Door Guard Shim..................................................... DH9 House Number 0-9, Diecast.............................................. DH1 VIII. SLIDING DOOR LOCKS Letters A-F, Solid Brass.................................................... DH1 Privacy Sliding Door Locks, Heavy Duty................. DH10 Letters A-Z, Solid Brass.................................................... DH1 Passage Sliding Door Locks, Heavy Duty............... DH10 Number 0-9, Solid Brass................................................... DH1 Privacy Sliding Door Locks...................................... DH10-DH11 II. MISCELLANEOUS DOOR AND WINDOW Passage Sliding Door Locks.................................... DH10-DH11 HARDWARE Dummy Sliding Door Locks...................................... DH11 Window Casement Fasteners........................................... DH2 IX. SECURITY BOLTS ASA Blank Filler Plate....................................................... DH3 Decorative Dutch Door Bolts, Solid Brass..............
    [Show full text]
  • Dallas Fire Code,” of the Dallas City Code, As Amended; Adopting with Certain Changes the 2015 Edition of the International Fire Code of the International
    161124 6-22- 16 ORDNANCE NO. 301 3 5 An ordinance amending Chapter 16, “Dallas Fire Code,” of the Dallas City Code, as amended; adopting with certain changes the 2015 Edition of the International Fire Code of the International Code Council, Inc.; regulating and governing the safeguarding of life and property from fire and explosion hazards arising from the storage, handling, and use of hazardous substances, materials, and devices, and from conditions hazardous to life or property in the occupancy of buildings and premises, and providing for the issuance of permits for hazardous uses or operations; providing a penalty not to exceed $2,000; providing a saving clause; providing a severability clause; and providing an effective date. BE IT ORDAINED BY THE CiTY COUNCIL OF THE CITY OF DALLAS: SECTION 1. That Chapter 16, “Dallas Fire Code,” of the Dallas City Code, as amended, is amended by adopting the 2015 Edition of the International Fire Code of the International Code Council, Inc. (which is attached as Exhibit A and made a part of this ordinance), with the following amendments: 1. Pages xxi-xxii, “Legislation,” are deleted. 2. Subsection 101.1, “Title,” of Section 101, “Scope and General Requirements,” of Part 1, “General Provisions,” of Chapter 1, “Scope and Administration,” of the 2015 International Fire Code is amended to read as follows: “101.1 Title. These regulations shall be known as the Dallas Fire Code [of [NAME OF JURISDICTION]], hereinafter referred to as ‘this code.” Amend Chapter 16 (adopt 2015 International Fire Code) — Page 1 30135 161124 3. Section 101, “Scope and General Requirements,” of Part 1, “General Provisions,” of Chapter 1, “Scope and Administration,” of the 2015 International Fire Code is amended by adding a new Subsection 101.6, “Exceptions,” to read as follows: “101.6 Exceptions.
    [Show full text]
  • Floor Fire Door Pleased to Offer a Series of Technical Bulletins De- Flush-Mounted Floor Doors Are Widely Used in Buildings for Access Between Floors
    BILCO TECHNICAL BULLETIN The Bilco Company, a Performance Criteria for a world leader in the design and manufacture of spe- cialty access products, is Floor Fire Door pleased to offer a series of technical bulletins de- Flush-mounted floor doors are widely used in buildings for access between floors. signed to address issues As fire protection standards become more stringent, code officials and specifiers related to access prod- have identified the need for a floor door with a fire rating that matches the floor- ucts within the construc- ceiling assembly. This bulletin examines the product performance criteria for this tion industry. demanding application. Vertical fire doors are Penetrations in floor-ceil- common place in modern ing assemblies must perform building construction. De- (in a fire protection sense) as signed for fire protection of well as the rated deck to en- Stairwell openings in wall systems, sure containment of the fire. or Elevator these doors are generally Since the door is flush Shaft tested in accordance with mounted in the floor, it is not ASTM E152 (NFPA 252) reasonable to assume that and are UL Listed. Essen- combustible items will not be tially, vertical fire doors located near or stored directly serve only to block the pas- on the door. Heat transmis- sage of flames between lat- sion becomes a critical issue. 1&1/2-Hr Vertical Fire Doors eral compartments or rooms For this reason, the floor fire 2-Hr Walls within the building. door must meet a signifi- 2-Hr Floor/Ceiling Assembly A questionable area ex- cantly higher performance ists in that if combustibles standard than its vertical ASTM E152 ASTM E119 (ie: furniture, drapery, sup- counterpart.
    [Show full text]
  • 2018 Connecticut State Fire Safety Code
    DEPARTMENT OF ADMINISTRATIVE SERVICES 2018 Connecticut State Fire Safety Code DIVISION OF MELODY A. CURREY CONSTRUCTION SERVICES Commissioner Office of the State Fire Marshal 450 Columbus Boulevard WILLIAM ABBOTT Hartford, CT 06103 State Fire Marshal Effective Legislative SubmissionDraft Version ForOctober PublicApril 16, Comment1, 2018 2018 January 2018 This page is intentionally left blank CONNECTICUT STATE FIRE SAFETY CODE Part I—Administrative Sec. 100 Title and Applicability Sec. 100.1 The Connecticut State Fire Safety Code and the adopted standards, as amended, shall be known as the Connecticut State Fire Safety Code, hereinafter referred to as “the code” or “this code”. Sec. 100.2 If a section, subsection, sentence, clause or phrase of this code is, for any reason, held to be unconstitutional, such decision shall not affect the validity of the remaining portions of this code. Sec. 100.3 In the event any part or provision of this code is held to be illegal or void, this shall not have the effect of making void or illegal any of the other parts or provisions hereof, which are determined to be legal; and it shall be presumed that this code would have been adopted without such illegal or invalid parts or provisions. Sec. 100.4 Nothing in this code shall be construed to prohibit a better type of building construction, an additional means of egress, or an otherwise safer condition than that specified by the minimum requirements of this code. Sec. 100.5 The provisions of the code shall only apply to detached private dwellings occupied by one or two families and townhouses with respect to smoke alarms and carbon monoxide detectors as specified in the State Building Code and subject to the specific inspection criteria for smoke detection and warning equipment of section 29-305 of the Connecticut General Statutes.
    [Show full text]
  • Technical Data Sheet No. 401 Basic Fire Door Requirements
    BASIC FIRE DOOR REQUIREMENTS TECHNICAL DATA SHEET NO. 401 Fire door openings are classified by their locations in the building. The location determines the length of exposure protection required, based on the potential fire hazard of that particular area. The six opening classifications are shown below along with the six door ratings and the maximum amount of glass in square inches allowed for each door. Label Maximum Classification Location In Building Glass Area 3 3 hour rated opening (Class A). Openings are in walls separating 100 square inches HOUR buildings or dividing a single building into fire areas. Doors for these per leaf. RATING openings require a fire protection rating of 3 hours. See note 1. 1 1/2 hour rated opening (Class B). Openings are in enclosures of vertical communication through buildings. These could be stairwells 1-1/2 or elevator shafts. While not a means of vertical communication, 100 square inches per leaf. HOUR boiler room doors are generally categorized as Class “B” openings. See note 2. RATING Door for these areas require a fire protection rating of 1 1/2 hours, and glass areas may not exceed 100 square inches per individual door leaf except as noted below. 3/4 hour rated opening (Class C). Openings are in corridors and 1296 square inches 3/4 room partitions. Doors for these areas require a fire protection rating per light. Neither HOUR of 3/4 hour, and the glass area cannot exceed 1296 square inches dimension to exceed RATING per light with no dimension exceeding 54 inches except as noted 54”.
    [Show full text]
  • BUILDERS' HARDWARE ~ \) ~ Paragra;Eh Page ~
    TA 7 .W34tmnl no.5-805-8 1968 l RTMENTS OF THE ARMY AND OCTOBER 1968 ■IM .- "½- ~u.-ua<J • ~~~ JO 11-eaJn8 £ 030 ) * TM 5-805-8 * AFM 88-.4, Chap. 2. TEOiNICAL MANUAL DEPARTMENTS OF THE ARMY •..S No. 5-805-8 AND TiiE AIR FORCE try AIR FORCE MANUAL ..::, No. 88-4, Chapter 2 Washington, D.C., 10 October 1968 ~ BUILDERS' HARDWARE ~ \) ~ ~ . Paragra;eh Page Purpose and Scope .................... ................... 1 3 Illustrations ..... .. .. ............................. .... 2 3 General ................ e: •••••••••••••••••••• • •••••••••••••• 3 3 Handing of Door . .......................................... 4 3 Hardware Reinforcement . .. ·....... ......................... 5 4 Butts and Hinges . ......................................... 6 4 Locksets, Latchsets, and Deadlocks •••••.•••.•• , ••••.••..•.• 7 7 Exit or Panic Devices ....................... ............. 8 8 Operating Trim . .......... ·...... .......................... 9 13 Door Closing Devices .. ....... ·....................... ..... 10 1S Door Centro ls . .............. ii · •••••••••••••••••••••••••••••• 11 18 Stops and Holders ... .......... ...................... .. ~. 12 18 Protective Plates ......................................... 13 20 Thresholds . .................. .... ...................... • .. 14 21 ~ ·.................... 15 21 Ot, Miscellaneous . ...... ................. • Hardware for Fire-Rated Doors • •• •• •••• ••••• • ••••••..• • ••••• 16 22 ~ Finishes of Hardware .•••• , •.•. • .• • ..••.•••••••.•••••• . ••.• • 17 23 Keying . .................. .....•.............•............
    [Show full text]
  • Fire Door Assemblies for Lunch and Learn
    Fire Rated Door Assemblies: Compliant Designs Steel Door Institute www.steeldoor.org AIA Provider #G389 Course #: SDIFIRE 1 HSW CE hour 1 Credit(s) earned on completion of This course is registered with AIA this course will be reported to AIA CES for continuing professional CES for AIA members. education. As such, it does not Certificates of Completion for both include content that may be AIA members and non-AIA deemed or construed to be an members are available upon approval or endorsement by the request. AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. ___________________________________________ Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation. 2 What is the Steel Door Institute (SDI)? • The Steel Door Institute has 11 members • Design professionals specify SDI manufacturers to ensure that their doors and frames meet the SDI standards they specify • Each member is actively involved in committees that develop codes, fire tests, and more • Standards are offered online at no charge • SDI serves as secretary to the Accredited Standards Committee (ASC) A250 3 Fire Door Assemblies • Fire-resistance-rated walls with a compartmentalize a building to deter the spread of smoke and flames • Opening protectives, also known as fire door assemblies protect openings in these walls Where are Fire Door Assemblies Required? • Building code specifies where fire door assemblies are required • Most US
    [Show full text]